getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. isSpotColor("name") -> bool Returns True if the color "name" is a spot color. See also setSpotColor() May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. setSpotColor("name", spot) Set the color "name" as a spot color if spot parameter is True. See also isSpotColor() May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. getDocName() -> string Returns the name the document was saved under. If the document was not saved before the name is empty. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setBaseLine(grid, offset) Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) -> string Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. Returns the group name for further referencing. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the internal scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. Internal scaling factors are different from the values shown on properties palette. Note : deprecated, use setImageScale() instead. May raise WrongFrameTypeError if the target frame is not an image frame setImageScale(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. Scaling factors are equal to the values shown on properties palette. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. moveSelectionToFront() Moves current selection to front. moveSelectionToFront()Moves current selection to front. moveSelectionToFront() Moves current selection to back. moveSelectionToFront()Moves current selection to back. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If object name is given, style is applied to the current text selection in object "name". If no object name is given, style is applied on selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageNSize() -> tuple Returns a tuple with a particular page's size measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageNMargins() -> tuple Returns a tuple with a particular page's margins measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). importPage("fromDoc", (pageList), [create, imortwhere, importwherePage]) Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function. fromDoc: string; the filename of the document to import pages from pageList: tuple with page numbers of pages to import create: number; 0 to replace existing pages, 1 (default) to insert new pages importWhere: number; the page number (of the current document) at which import the pages importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document importPage("fromDoc", (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "colour1", shade1, "colour2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientStop("color", shade, opacity, ramppoint, ["name"]) Set or add a gradient stop to the gradient fill of the object "name" at position ramppoint. Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill() must have been called previously for the gradient fill to be visible. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. createParagraphStyle(...) Creates a paragraph style. This function takes the following keyword parameters: "name" [required] -> specifies the name of the paragraphstyle to create linespacingmode [optional] -> specifies the linespacing mode; possible modes are: fixed linespacing: 0 automatic linespacing: 1 baseline grid linespacing: 2 linespacing [optional] -> specifies the linespacing if using fixed linespacing alignment [optional] -> specifies the alignment of the paragraph -> left: 0 -> center: 1 -> right: 2 -> justify: 3 -> extend: 4 leftmargin [optional], rightmargin [optional] -> specify the margin gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs firstindent [optional] -> the indent of the first line hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no) dropcaplines [optional] -> height (in lines) of the caps if used dropcapoffset [optional] -> offset of the caps if used "charstyle" [optional] -> char style to use createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:"name" [required] -> specifies the name of the paragraphstyle to createlinespacingmode [optional] -> specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -> specifies the linespacing if using fixed linespacingalignment [optional] -> specifies the alignment of the paragraph-> left: 0-> center: 1-> right: 2-> justify: 3-> extend: 4leftmargin [optional], rightmargin [optional] -> specify the margingapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphsfirstindent [optional] -> the indent of the first linehasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -> height (in lines) of the caps if useddropcapoffset [optional] -> offset of the caps if used"charstyle" [optional] -> char style to use createCharStyle(...) Creates a character style. This function takes the following keyword parameters: "name" [required] -> name of the char style to create "font" [optional] -> name of the font to use fontsize [optional] -> font size to set (double) "features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!): -> inherit -> bold -> italic -> underline -> underlinewords -> strike -> superscript -> subscript -> outline -> shadowed -> allcaps -> smallcaps "fillcolor" [optional], "fillshade" [optional] -> specify fill options "strokecolor" [optional], "strokeshade" [optional] -> specify stroke options baselineoffset [optional] -> offset of the baseline shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used outlinewidth [optional] -> width of the outline if used underlineoffset [optional], underlinewidth [optional] -> underline options if used strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used scaleh [optional], scalev [optional] -> scale of the chars tracking [optional] -> tracking of the text "language" [optional] -> language code createCharStyle(...)Creates a character style. This function takes the following keyword parameters:"name" [required] -> name of the char style to create"font" [optional] -> name of the font to usefontsize [optional] -> font size to set (double)"features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-> inherit-> bold-> italic-> underline-> underlinewords-> strike-> superscript-> subscript-> outline-> shadowed-> allcaps-> smallcaps"fillcolour" [optional], "fillshade" [optional] -> specify fill options"strokecolour" [optional], "strokeshade" [optional] -> specify stroke optionsbaselineoffset [optional] -> offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if usedoutlinewidth [optional] -> width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -> underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -> strikethru options if usedscaleh [optional], scalev [optional] -> scale of the charstracking [optional] -> tracking of the text"language" [optional] -> language code getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getTextDistances(["name"]) -> tuple Returns the text distances of the text frame "name" expressed in points. The distances are returned as a tuple like (left, right, top, bottom). If "name" is not given the currently selected item is used. getTextDistances(["name"]) -> tupleReturns the text distances of the text frame "name" expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If "name"is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacingMode(mode, ["name"]) Sets the line spacing mode of the text frame "name" to "mode". If "name" is not given the currently selected item is used. Mode values are the same as in createParagraphStyle. May throw ValueError if the mode is out of bounds. setTextDistances(left, right, top, bottom, ["name"]) Sets the text distances of the text frame "name" to the values "left" "right", "top" and "bottom". If "name" is not given the currently selected item is used. May throw ValueError if any of the distances are out of bounds (must be positive). setTextDistances(left, right, top, bottom, ["name"])Sets the text distances of the text frame "name" to the values "left""right", "top" and "bottom". If "name" is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextScalingV(scale, ["name"]) Sets the vertical character scaling of the object "name" to "scale" in percent. If "name" is not given the currently selected item is used. setTextScalingH(scale, ["name"]) Sets the horizontal character scaling of the object "name" to "scale" in percent. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame hyphenateText(["name"]) -> bool Does hyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame hyphenateText(["name"]) -> boolDoes hyphenation on text frame "name".If "name" is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> bool Does dehyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> boolDoes dehyphenation on text frame "name".If "name" is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. scrollDocument(x,y) Scroll the document in main GUI window by x and y. scrollDocument(x,y)Scroll the document in main GUI window by x and y. placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG @default getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "colour1", shade1, "colour2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame moveSelectionToFront() Moves current selection to front. moveSelectionToFront()Moves current selection to front. moveSelectionToFront() Moves current selection to back. moveSelectionToFront()Moves current selection to back. importPage("fromDoc", (pageList), [create, imortwhere, importwherePage]) Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function. fromDoc: string; the filename of the document to import pages from pageList: tuple with page numbers of pages to import create: number; 0 to replace existing pages, 1 (default) to insert new pages importWhere: number; the page number (of the current document) at which import the pages importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document importPage("fromDoc", (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document createCharStyle(...) Creates a character style. This function takes the following keyword parameters: "name" [required] -> name of the char style to create "font" [optional] -> name of the font to use fontsize [optional] -> font size to set (double) "features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!): -> inherit -> bold -> italic -> underline -> underlinewords -> strike -> superscript -> subscript -> outline -> shadowed -> allcaps -> smallcaps "fillcolor" [optional], "fillshade" [optional] -> specify fill options "strokecolor" [optional], "strokeshade" [optional] -> specify stroke options baselineoffset [optional] -> offset of the baseline shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used outlinewidth [optional] -> width of the outline if used underlineoffset [optional], underlinewidth [optional] -> underline options if used strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used scaleh [optional], scalev [optional] -> scale of the chars tracking [optional] -> tracking of the text "language" [optional] -> language code createCharStyle(...)Creates a character style. This function takes the following keyword parameters:"name" [required] -> name of the char style to create"font" [optional] -> name of the font to usefontsize [optional] -> font size to set (double)"features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-> inherit-> bold-> italic-> underline-> underlinewords-> strike-> superscript-> subscript-> outline-> shadowed-> allcaps-> smallcaps"fillcolour" [optional], "fillshade" [optional] -> specify fill options"strokecolour" [optional], "strokeshade" [optional] -> specify stroke optionsbaselineoffset [optional] -> offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if usedoutlinewidth [optional] -> width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -> underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -> strikethru options if usedscaleh [optional], scalev [optional] -> scale of the charstracking [optional] -> tracking of the text"language" [optional] -> language code hyphenateText(["name"]) -> bool Does hyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame hyphenateText(["name"]) -> boolDoes hyphenation on text frame "name".If "name" is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> bool Does dehyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> boolDoes dehyphenation on text frame "name".If "name" is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame scrollDocument(x,y) Scroll the document in main GUI window by x and y. scrollDocument(x,y)Scroll the document in main GUI window by x and y. createParagraphStyle(...) Creates a paragraph style. This function takes the following keyword parameters: "name" [required] -> specifies the name of the paragraphstyle to create linespacingmode [optional] -> specifies the linespacing mode; possible modes are: fixed linespacing: 0 automatic linespacing: 1 baseline grid linespacing: 2 linespacing [optional] -> specifies the linespacing if using fixed linespacing alignment [optional] -> specifies the alignment of the paragraph -> left: 0 -> center: 1 -> right: 2 -> justify: 3 -> extend: 4 leftmargin [optional], rightmargin [optional] -> specify the margin gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs firstindent [optional] -> the indent of the first line hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no) dropcaplines [optional] -> height (in lines) of the caps if used dropcapoffset [optional] -> offset of the caps if used "charstyle" [optional] -> char style to use createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:"name" [required] -> specifies the name of the paragraphstyle to createlinespacingmode [optional] -> specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -> specifies the linespacing if using fixed linespacingalignment [optional] -> specifies the alignment of the paragraph-> left: 0-> center: 1-> right: 2-> justify: 3-> extend: 4leftmargin [optional], rightmargin [optional] -> specify the margingapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphsfirstindent [optional] -> the indent of the first linehasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -> height (in lines) of the caps if useddropcapoffset [optional] -> offset of the caps if used"charstyle" [optional] -> char style to use getTextDistances(["name"]) -> tuple Returns the text distances of the text frame "name" expressed in points. The distances are returned as a tuple like (left, right, top, bottom). If "name" is not given the currently selected item is used. getTextDistances(["name"]) -> tupleReturns the text distances of the text frame "name" expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If "name"is not given the currently selected item is used. setTextDistances(left, right, top, bottom, ["name"]) Sets the text distances of the text frame "name" to the values "left" "right", "top" and "bottom". If "name" is not given the currently selected item is used. May throw ValueError if any of the distances are out of bounds (must be positive). setTextDistances(left, right, top, bottom, ["name"])Sets the text distances of the text frame "name" to the values "left""right", "top" and "bottom". If "name" is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive). AIPlug Importing: %1 Importing: %1 Analyzing File: Analysing File: Group%1 Group%1 Generating Items Generating Items About Contributions from: Contributions from: &About &About A&uthors A&uthors &Translations &Translations &Online &Online &Close &Close Development Team: Development Team: Official Documentation: Official Documentation: Other Documentation: Other Documentation: Homepage Homepage Online Reference Online Reference Bugs and Feature Requests Bugs and Feature Requests Mailing List Mailing List Official Translations and Translators: Official Translations and Translators: Previous Translation Contributors: Previous Translation Contributors: About Scribus %1 About Scribus %1 Wiki Wiki %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 Using Ghostscript version %1 No Ghostscript version available No Ghostscript version available Build ID: Build ID: Mac OS&#174; X Aqua Port: Mac OS&#174; X Aqua Port: Windows&#174; Port: Windows&#174; Port: Tango Project Icons: Tango Project Icons: &Updates &Updates Check for &Updates Check for &Updates Check for updates to Scribus. No data from your machine will be transferred off it. Check for updates to Scribus. No data from your machine will be transferred off it. OS/2&#174;/eComStation&#8482; Port: OS/2&#174;/eComStation&#8482; Port: Splash Screen: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribus Version Check for Updates Check for Updates Abort Update Check Abort Update Check Developer Blog Developer Blog &Licence &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Doc Translators: Webmasters: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Filename: Filename: Version: Version: Enabled: Enabled: Release Date: Release Date: Description: Description: Author(s): Author(s): Copyright: Copyright: License: License: Scribus: About Plug-ins Scribus: About Plug-ins ActionManager &Image Effects &Image Effects &Tabulators... &Tabulators... &New &New &Open... &Open... &Close &Close &Save &Save Save &As... Save &As... Re&vert to Saved Re&vert to Saved Collect for O&utput... Collect for O&utput... Get Text... Get Text... Append &Text... Append &Text... Get Image... Get Image... Save &Text... Save &Text... Save as P&DF... Save as P&DF... Document &Setup... Document &Setup... P&references 150... P&references 150... &Print... &Print... &Quit &Quit &Undo &Undo &Redo &Redo &Item Action Mode &Item Action Mode Cu&t Cu&t &Copy &Copy &Paste &Paste Select &All Select &All &Deselect All &Deselect All &Search/Replace... &Search/Replace... C&olors... C&olours... Gradients... Gradients... &Master Pages... &Master Pages... P&references... P&references... %1 pt %1 pt &Other... &Other... &Left &Left &Center &Centre &Right &Right &Block &Block &Forced &Forced &%1 % &%1 % &Normal &Normal &Underline &Underline Underline &Words Underline &Words &Strike Through &Strike Through &All Caps &All Caps Small &Caps Small &Caps Su&perscript Su&perscript Su&bscript Su&bscript D&uplicate D&uplicate &Multiple Duplicate &Multiple Duplicate &Delete &Delete &Group &Group &Ungroup &Ungroup Is &Locked Is &Locked Si&ze is Locked Si&ze is Locked Lower to &Bottom Lower to &Bottom Raise to &Top Raise to &Top &Lower &Lower &Raise &Raise Send to S&crapbook Send to S&crapbook &Attributes... &Attributes... I&mage Visible I&mage Visible Is PDF &Bookmark Is PDF &Bookmark Is PDF A&nnotation Is PDF A&nnotation Annotation P&roperties Annotation P&roperties Field P&roperties Field P&roperties &Edit Shape... &Edit Shape... &Attach Text to Path &Attach Text to Path &Detach Text from Path &Detach Text from Path &Combine Polygons &Combine Polygons Split &Polygons Split &Polygons &Bezier Curve &Bezier Curve &Image Frame &Image Frame &Polygon &Polygon &Text Frame &Text Frame &Glyph... &Glyph... Sample Text Sample Text &Insert... &Insert... Im&port... Im&port... &Delete... &Delete... &Copy... &Copy... &Move... &Move... &Apply Master Page... &Apply Master Page... Manage &Guides... Manage &Guides... &50% &50% &75% &75% &100% &100% &200% &200% Show &Margins Show &Margins Show &Frames Show &Frames Show &Images Show &Images Show &Grid Show &Grid Show G&uides Show G&uides Show &Baseline Grid Show &Baseline Grid Show &Text Chain Show &Text Chain Sn&ap to Grid Sn&ap to Grid Sna&p to Guides Sna&p to Guides &Properties &Properties &Scrapbook &Scrapbook &Layers &Layers &Bookmarks &Bookmarks &Measurements &Measurements Action &History Action &History Preflight &Verifier Preflight &Verifier &Tools &Tools P&DF Tools P&DF Tools Select Item Select Item Rotate Item Rotate Item Zoom in or out Zoom in or out Zoom in Zoom in Zoom out Zoom out Edit Contents of Frame Edit Contents of Frame Link Text Frames Link Text Frames Unlink Text Frames Unlink Text Frames &Eye Dropper &Eye Dropper Copy Item Properties Copy Item Properties &Manage Pictures &Manage Pictures &Hyphenate Text &Hyphenate Text &Generate Table Of Contents &Generate Table Of Contents &About Scribus &About Scribus About &Qt About &Qt Toolti&ps Toolti&ps Scribus &Manual... Scribus &Manual... Smart &Hyphen Smart &Hyphen Non Breaking &Space Non Breaking &Space Page &Number Page &Number Copyright Copyright Registered Trademark Registered Trademark Trademark Trademark Bullet Bullet Em Dash Em Dash En Dash En Dash Figure Dash Figure Dash Quotation Dash Quotation Dash Toggle Palettes Toggle Palettes S&hadow S&hadow &Low Resolution &Low Resolution &Normal Resolution &Normal Resolution &Full Resolution &Full Resolution Edit Image... Edit Image... &Update Image &Update Image Adjust Frame to Image Adjust Frame to Image Extended Image Properties Extended Image Properties Show Control Characters Show Control Characters &Align and Distribute &Align and Distribute Edit Text... Edit Text... New Line New Line Frame Break Frame Break Column Break Column Break Non Breaking Dash Non Breaking Dash Toggle Guides Toggle Guides &Arrange Pages &Arrange Pages Dehyphenate Text Dehyphenate Text Manage Page Properties... Manage Page Properties... Rulers relative to Page Rulers relative to Page Print Previe&w Print Previe&w &JavaScripts... &JavaScripts... Convert to Master Page... Convert to Master Page... &Cascade &Cascade &Tile &Tile &About Plug-ins &About Plug-ins More Info... More Info... &Printing Enabled &Printing Enabled &Flip Horizontally &Flip Horizontally &Flip Vertically &Flip Vertically Show Rulers Show Rulers &Outline Document Outline Palette &Outline Solidus Solidus Middle Dot Middle Dot En Space En Space Em Space Em Space Thin Space Thin Space Thick Space Thick Space Mid Space Mid Space Hair Space Hair Space ff ff fi fi fl fl ffi ffi ffl ffl ft ft st st S&tyles... S&tyles... &Outline type effect &Outline &Outlines Convert to oulines &Outlines Paste (&Absolute) Paste (&Absolute) C&lear C&lear Insert PDF Push Button Insert PDF Push Button Insert PDF Text Field Insert PDF Text Field Insert PDF Check Box Insert PDF Check Box Insert PDF Combo Box Insert PDF Combo Box Insert PDF List Box Insert PDF List Box Insert Text Annotation Insert Text Annotation Insert Link Annotation Insert Link Annotation Save as &EPS... Save as &EPS... Show Text Frame Columns Show Text Frame Columns &Frame... &Frame... Preview Mode Preview Mode Show Layer Indicators Show Layer Indicators Patterns... Patterns... Send to Patterns Send to Patterns Sticky Tools Sticky Tools &Fit to Height &Fit to Height Fit to Width Fit to Width Show Bleeds Show Bleeds Insert 3D Annotation Insert 3D Annotation &Zero Width Space &Zero Width Space Zero Width NB Space Zero Width NB Space Apostrophe Unicode 0x0027 Apostrophe Straight Double Unicode 0x0022 Straight Double Single Left Unicode 0x2018 Single Left Single Right Unicode 0x2019 Single Right Double Left Unicode 0x201C Double Left Double Right Unicode 0x201D Double Right Single Reversed Unicode 0x201B Single Reversed Double Reversed Unicode 0x201F Double Reversed Single Left Guillemet Unicode 0x2039 Single Left Guillemet Single Right Guillemet Unicode 0x203A Single Right Guillemet Double Left Guillemet Unicode 0x00AB Double Left Guillemet Double Right Guillemet Unicode 0x00BB Double Right Guillemet Low Single Comma Unicode 0x201A Low Single Comma Low Double Comma Unicode 0x201E Low Double Comma CJK Single Left Unicode 0x300C CJK Single Left CJK Single Right Unicode 0x300D CJK Single Right CJK Double Left Unicode 0x300E CJK Double Left CJK Double Right Unicode 0x300F CJK Double Right &400% &400% Edit Latex Source... Edit Latex Source... Insert &Text Frame Insert &Text Frame Insert &Image Frame Insert &Image Frame Insert &Latex Frame Insert &Latex Frame Insert T&able Insert T&able Insert &Shape Insert &Shape Insert &Polygon Insert &Polygon Insert &Line Insert &Line Insert &Bezier Curve Insert &Bezier Curve Insert &Freehand Line Insert &Freehand Line Scribus Homepage Scribus Homepage Scribus Online Documentation Scribus Online Documentation Scribus Wiki Scribus Wiki Getting Started with Scribus Getting Started with Scribus Show Context Menu Show Context Menu &Manage Images &Manage Images &About Plugins &About Plugins Insert Unicode Character Begin Sequence Insert Unicode Character Begin Sequence Get Vector File... Get Vector File... Advanced Select All... Advanced Select All... Edit Source... Edit Source... Replace Colors... Replace Colours... Rulers Relative to Page Rulers Relative to Page Insert &Render Frame Insert &Render Frame Check for Updates Check for Updates Number of Pages Number of Pages Adjust Image to Frame Adjust Image to Frame Move/Resize value indicator Move/Resize value indicator File File &File &File Edit Edit &Edit &Edit Style Style &Style &Style Item Item &Item &Item Insert Insert I&nsert I&nsert Page Page &Page &Page View View &View &View Extras Extras E&xtras E&xtras Windows Windows &Windows &Windows Help Help &Help &Help Plugin Menu Items Plugin Menu Items Others Others Unicode Characters Unicode Characters Move/Resize Value Indicator Move/Resize Value Indicator New &from Template... New &from Template... AdjustCmsDialog CMS Settings CMS Settings AlignDistribute Align Align &Selected Guide: &Selected Guide: &Relative To: &Relative To: ... ... Distribute Distribute &Distance: &Distance: Swap Swap AlignDistributePalette Align and Distribute Align and Distribute &Relative to: &Relative to: First Selected First Selected Last Selected Last Selected Page Page Margins Margins Selection Selection Align bottoms Align bottoms Align right sides Align right sides Center on vertical axis Centre on vertical axis Align left sides Align left sides Center on horizontal axis Centre on horizontal axis Align tops Align tops Distribute left sides equidistantly Distribute left sides equidistantly Distribute bottoms equidistantly Distribute bottoms equidistantly Distribute centers equidistantly horizontally Distribute centres equidistantly horizontally Distribute centers equidistantly vertically Distribute centres equidistantly vertically Distribute tops equidistantly Distribute tops equidistantly Distribute right sides equidistantly Distribute right sides equidistantly Guide Guide &Selected Guide: &Selected Guide: &Distance: &Distance: Distribute the items with the distance specified Distribute the items with the distance specified None Selected None Selected Swap items to the left Swap items to the left Swap items to the right Swap items to the right Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Align right sides of items to left side of anchor Align right sides of items to left side of anchor Align left sides of items to right side of anchor Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal Make vertical gaps between items and the top and bottom of page equal Align Align Distribute Distribute <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to The location of the selected guide to align to AlignSelect Align Text Left Align Text Left Align Text Right Align Text Right Align Text Center Align Text Centre Align Text Justified Align Text Justified Align Text Forced Justified Align Text Forced Justified Annot Field Properties Field Properties Type: Type: Button Button Text Field Text Field Check Box Check Box Combo Box Combo Box List Box List Box Properties Properties Name: Name: Text Text Border Border Color: Colour: None None Width: Width: Thin Thin Normal Normal Wide Wide Style: Style: Solid Solid Dashed Dashed Underline Underline Beveled Beveled Inset Inset Other Other Read Only Read Only Required Required Visibility: Visibility: Visible Visible Hidden Hidden No Print No Print No View No View Appearance Appearance Text for Button Down Text for Button Down Text for Roll Over Text for Roll Over Icons Icons Use Icons Use Icons Remove Remove Pressed Pressed Roll Over Roll Over Icon Placement... Icon Placement... Highlight Highlight Invert Invert Outlined Outlined Push Push Multi-Line Multi-Line Password Password Limit of Limit of Characters Characters Do Not Scroll Do Not Scroll Do Not Spell Check Do Not Spell Check Check Style: Check Style: Check Check Cross Cross Diamond Diamond Circle Circle Star Star Square Square Default is Checked Default is Checked Editable Editable Options Options Go To Go To Submit Form Submit Form Reset Form Reset Form Import Data Import Data Event: Event: Mouse Up Mouse Up Mouse Down Mouse Down Mouse Enter Mouse Enter Mouse Exit Mouse Exit On Focus On Focus On Blur On Blur Script: Script: Edit... Edit... Submit to URL: Submit to URL: Submit Data as HTML Submit Data as HTML Import Data from: Import Data from: Destination Destination To File: To File: Change... Change... Page: Page: X-Pos: X-Pos: pt pt Y-Pos: Y-Pos: Action Action Field is formatted as: Field is formatted as: Plain Plain Number Number Percentage Percentage Date Date Time Time Custom Custom Number Format Number Format Decimals: Decimals: Use Currency Symbol Use Currency Symbol Prepend Currency Symbol Prepend Currency Symbol Formatting Formatting Percent Format Percent Format Date Format Date Format Time Format Time Format Custom Scripts Custom Scripts Format: Format: Keystroke: Keystroke: Format Format Value is not validated Value is not validated Value must be greater than or equal to: Value must be greater than or equal to: and less or equal to: and less or equal to: Custom validate script: Custom validate script: Validate Validate Value is not calculated Value is not calculated Value is the Value is the sum sum product product average average minimum minimum maximum maximum of the following fields: of the following fields: Pick... Pick... Custom calculation script: Custom calculation script: Calculate Calculate OK OK Cancel Cancel Enter a comma separated list of fields here Enter a comma separated list of fields here You need at least the Icon for Normal to use Icons for Buttons You need at least the Icon for Normal to use Icons for Buttons Open Open Example: Example: Selection Change Selection Change Font for use with PDF 1.3: Font for use with PDF 1.3: Flag is ignored for PDF 1.3 Flag is ignored for PDF 1.3 PDF Files (*.pdf);;All Files (*) PDF Files (*.pdf);;All Files (*) JavaScript JavaScript None highlight None None action None Tooltip: Tooltip: Do Not Export Value Do Not Export Value Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Export absolute Filename Export absolute Filename Submit format: Submit format: FDF FDF HTML HTML XFDF XFDF PDF PDF Annota Annotation Properties Annotation Properties Text Text Link Link External Link External Link External Web-Link External Web-Link Destination Destination pt pt Open Open &Type: &Type: C&hange... C&hange... &Page: &Page: &X-Pos &X-Pos &Y-Pos: &Y-Pos: %1;;All Files (*) %1;;All Files (*) Export absolute Filename Export absolute Filename ApplyMasterPageDialog Apply Master Page Apply Master Page &Master Page: &Master Page: Apply To Apply To Current &page Current &page Alt+P Alt+P &Even pages &Even pages Alt+E Alt+E O&dd pages O&dd pages Alt+D Alt+D &All pages &All pages Alt+A Alt+A &Within range &Within range Alt+W Alt+W to to Alt+O Alt+O Alt+C Alt+C Apply the selected master page to even, odd or all pages within the following range Apply the selected master page to even, odd or all pages within the following range Possible Hyphenation Possible Hyphenation Apply to Apply to Current &Page Current &Page &Even Pages &Even Pages O&dd Pages O&dd Pages &All Pages &All Pages &Within Range &Within Range AspellPlugin Spell-checking support Spell-checking support Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text. 0.1 0.1 Spell Checker Spell Checker Aspell Plugin Error Aspell Plugin Error AspellPluginBase Spell Check Spell Check Replacement: Replacement: &Add Word &Add Word &Change &Change &Exit &Exit Not in Dictionary: Not in Dictionary: Word that was not found in the active dictionary Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: Active Dictionary: The currently active dictionary. Scribus uses aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. The currently active dictionary. Scribus uses aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. Ignore the current text not found in the active dictionary Ignore the current text not found in the active dictionary &Ignore &Ignore Ignore all occurrences of the current text not found in the active dictionary Ignore all occurrences of the current text not found in the active dictionary I&gnore All I&gnore All Add the current word to the your personal spelling dictionary for future use Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Change A&ll Close Close AspellPluginImpl Loaded Loaded default default aspell dictionary. aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller. AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Spelling check complete Spell Checker Spell Checker No available Aspell dictionaries found. Install some, please. No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Arrows Flow Chart Flow Chart Jigsaw Jigsaw Specials Specials Default Shapes Default Shapes Barcode &Barcode Generator... &Barcode Generator... Scribus frontend for Pure Postscript Barcode Writer Scribus frontend for Pure Postscript Barcode Writer &Barcode... &Barcode... Scribus frontend for Pure PostScript Barcode Writer Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator Error opening file: %1 Error opening file: %1 12 or 13 digits 12 or 13 digits 8 digits 8 digits 11 or 12 digits 11 or 12 digits 7 or 8 digits 7 or 8 digits 5 digits 5 digits 2 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits Variable number of digits Variable number of digits and capital letters Variable number of digits and capital letters Variable number of hexadecimal characters Variable number of hexadecimal characters Barcode incomplete Barcode incomplete 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type Select Type Select Barcode Type Select Barcode Type BarcodeGeneratorBase Barcode Creator Barcode Creator Barcode Barcode &Type: &Type: Select one of the available barcode type here Select one of the available barcode type here The numeric representation of the code itself. See the help message below The numeric representation of the code itself. See the help message below Reset the barcode samples Reset the barcode samples &Include text in barcode &Include text in barcode Alt+I Alt+I If checked, there will be numbers in the barcode too If checked, there will be numbers in the barcode too &Guard whitespace &Guard whitespace Alt+G Alt+G Draw arrows to be sure of space next the code Draw arrows to be sure of space next the code Colors Colours &Background &Background Alt+B Alt+B Background color - under the code lines Background colour - under the code lines &Lines &Lines Alt+L Alt+L Color of the lines in barcode Colour of the lines in barcode &Text &Text Alt+T Alt+T Color of the text and numbers Colour of the text and numbers Hints and help is shown here Hints and help is shown here Preview of the result. 72dpi sample. Preview of the result. 72dpi sample. Co&de: Co&de: I&nclude checksum I&nclude checksum Alt+N Alt+N Generate and include a checksum in barcode Generate and include a checksum in barcode Incl&ude checksum digit Incl&ude checksum digit Alt+U Alt+U Include the checksum digit in the barcode text Include the checksum digit in the barcode text Insert Barcode Insert Barcode Format Format Incl&ude Checksum Digit Incl&ude Checksum Digit I&nclude Checksum I&nclude Checksum &Guard Whitespace &Guard Whitespace &Include Text in Barcode &Include Text in Barcode Biblio Scrapbook Scrapbook Delete Delete Object Object New Entry New Entry Rename Rename &Name: &Name: Name "%1" is not unique. Please choose another. Name "%1" is not unique. Please choose another. Choose a Scrapbook Directory Choose a Scrapbook Directory Choose a Directory Choose a Directory Choose a scrapbook file to import Choose a scrapbook file to import Create a new scrapbook page Create a new scrapbook page Load an existing scrapbook Load an existing scrapbook Save the selected scrapbook Save the selected scrapbook Import an scrapbook file from Scribus <=1.3.2 Import an scrapbook file from Scribus <=1.3.2 Close the selected scrapbook Close the selected scrapbook Copy To: Copy To: Move To: Move To: Main Main Copied Items Copied Items New Name New Name Scrapbook (*.scs *.SCS) Scrapbook (*.scs *.SCS) Paste to Page Paste to Page Save as... Save as... Close Close Delete Contents Delete Contents Do you really want to delete all entries? Do you really want to delete all entries? BookPalette Bookmarks Bookmarks ButtonIcon Icon Placement Icon Placement Layout: Layout: Caption only Caption only Icon only Icon only Caption below Icon Caption below Icon Caption above Icon Caption above Icon Caption right to Icon Caption right to Icon Caption left to Icon Caption left to Icon Caption overlays Icon Caption overlays Icon Scale: Scale: Always Always When Icon is too big When Icon is too big Never Never Scale How: Scale How: Proportional Proportional Non Proportional Non Proportional Icon Icon OK OK Cancel Cancel Reset Reset When Icon is too small When Icon is too small CMSPrefs System Profiles System Profiles Rendering Intents Rendering Intents Monitor profile can only be changed when no document are currently opened. Monitor profile can only be changed when no document are currently opened. Monitor profiles can only be changed when no documents are currently opened. Monitor profiles can only be changed when no documents are currently opened. Perceptual Perceptual Relative Colorimetric Relative Colourimetric Saturation Saturation Absolute Colorimetric Absolute Colourimetric Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. &Activate Color Management &Activate Colour Management &Monitor: &Monitor: P&rinter: P&rinter: Sim&ulate Printer on the Screen Sim&ulate Printer on the Screen Mark Colors out of &Gamut Mark Colours out of &Gamut Use &Blackpoint Compensation Use &Blackpoint Compensation &RGB Pictures: &RGB Pictures: &CMYK Pictures: &CMYK Pictures: Default color profile for imported CMYK images Default colour profile for imported CMYK images Default color profile for imported RGB images Default colour profile for imported RGB images &RGB Solid Colors: &RGB Solid Colours: &CMYK Solid Colors: &CMYK Solid Colours: Pictures: Pictures: Sol&id Colors: Sol&id Colours: Convert all colors to printer space Convert all colours to printer space Default color profile for solid RGB colors on the page Default colour profile for solid RGB colours on the page Default color profile for solid CMYK colors on the page Default colour profile for solid CMYK colours on the page Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for solid colours. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for images. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Simulate a full colour managed environment : all colours, rgb or cmyk, are converted to printer colour space. Images: Images: CMSPrefsBase Form Form &Activate Color Management &Activate Colour Management System Profiles System Profiles &RGB Images: &RGB Images: Default color profile for imported RGB images Default colour profile for imported RGB images &CMYK Images: &CMYK Images: Default color profile for imported CMYK images Default colour profile for imported CMYK images &RGB Solid Colors: &RGB Solid Colours: Default color profile for solid RGB colors on the page Default colour profile for solid RGB colours on the page &CMYK Solid Colors: &CMYK Solid Colours: Default color profile for solid CMYK colors on the page Default colour profile for solid CMYK colours on the page Document Options Document Options Simulate printer on Screen Simulate printer on Screen Monitor Profile Monitor Profile &Monitor: &Monitor: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). P&rinter: P&rinter: Document Profiles Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Rendering Intents Rendering Intents Images: Images: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for images. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Sol&id Colors: Sol&id Colours: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for solid colours. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Sim&ulate Printer on the Screen Sim&ulate Printer on the Screen Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Simulate a full colour managed environment : all colours, rgb or cmyk, are converted to printer colour space. Convert all colors to printer space Convert all colours to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Mark Colors out of &Gamut Mark Colours out of &Gamut Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Document Rendering Intents Document Rendering Intents Use &Blackpoint Compensation Use &Blackpoint Compensation CMYKChoose Edit Color Edit Colour CMYK CMYK RGB RGB Web Safe RGB Web Safe RGB New New Old Old C: C: M: M: Y: Y: K: K: Dynamic Color Bars Dynamic Colour Bars Static Color Bars Static Colour Bars R: R: G: G: B: B: % % HSV-Colormap HSV-Colourmap &Name: &Name: Color &Model Colour &Model Is Spot Color Is Spot Colour Is Registration Color Is Registration Colour You cannot create a color named "%1". It is a reserved name for transparent color You cannot create a colour named "%1". It is a reserved name for transparent colour Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself. Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself. The name of the color already exists, please choose another one. The name of the colour already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. Choosing this will make this colour a spot colour, thus creating another spot when creating plates or separations. This is used most often when a logo or other colour needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Colour Management. You cannot create a color without a name Please give it a name You cannot create a colour without a namePlease give it a name HSV Color Map HSV Colour Map CWDialog Merging colors Merging colours Error: Error: Color %1 exists already! Colour %1 exists already! Color %1 appended. Colour %1 appended. Now opening the color manager. Now opening the colour manager. Color Merging Colour Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, grey or white. There is no way to process this colour. Color Wheel Colour Wheel Click the wheel to get the base color. Its color model depends on the chosen tab. Click the wheel to get the base colour. Its colour model depends on the chosen tab. Result Colors Result Colours CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Colours of your chosen colour scheme. Color Scheme Method Colour Scheme Method Angle: Angle: Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Merge created colors into the document colors Merge created colours into the document colours &Merge &Merge Alt+M Alt+M Replace created colors in the document colors Replace created colours in the document colours &Replace &Replace Alt+R Alt+R Leave colors untouched Leave colours untouched &Cancel &Cancel Alt+C Alt+C Preview: Preview: Sample color scheme. Sample colour scheme. Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Vision Defect Type: Vision Defect Type: C: C: % % M: M: Y: Y: K: K: RGB: RGB: HSV: HSV: R: R: G: G: B: B: CMYK: CMYK: H: H: S: S: V: V: Document Document Canvas X: %1 Y: %2 X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 Length: %1 Angle: %2 Width: %1 Height: %2 Width: %1 Height: %2 Angle: %1 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. The selected colour does not exist in the document's colour set. Please enter a name for this new colour. Color Not Found Colour Not Found The name you have selected already exists. Please enter a different name for this new color. The name you have selected already exists. Please enter a different name for this new colour. CanvasMode_Normal All Supported Formats All Supported Formats Open Open CgmPlug Importing: %1 Importing: %1 Analyzing File: Analysing File: Group%1 Group%1 Generating Items Generating Items CharSelect Font: Font: Character Class: Character Class: &Insert &Insert C&lear C&lear Insert the characters at the cursor in the text Insert the characters at the cursor in the text Delete the current selection(s). Delete the current selection(s). Full Character Set Full Character Set Basic Latin Basic Latin Latin-1 Supplement Latin-1 Supplement Latin Extended-A Latin Extended-A Latin Extended-B Latin Extended-B General Punctuation General Punctuation Super- and Subscripts Super- and Subscripts Currency Symbols Currency Symbols Letterlike Symbols Letterlike Symbols Number Forms Number Forms Arrows Arrows Mathematical Operators Mathematical Operators Box Drawing Box Drawing Block Elements Block Elements Geometric Shapes Geometric Shapes Miscellaneous Symbols Miscellaneous Symbols Dingbats Dingbats Small Form Variants Small Form Variants Ligatures Ligatures Specials Specials Greek Greek Greek Extended Greek Extended Cyrillic Cyrillic Cyrillic Supplement Cyrillic Supplement Arabic Arabic Arabic Extended A Arabic Extended A Arabic Extended B Arabic Extended B Hebrew Hebrew You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Scribus Char Palette (*.ucp);;All Files (*) Scribus Char Palette (*.ucp);;All Files (*) Enhanced Palette Enhanced Palette Quick Palette Quick Palette Hide Enhanced Hide Enhanced Choose a filename to open Choose a filename to open Error Error Error reading file %1 - file is corrupted propably. Error reading file %1 - file is corrupted propably. Choose a filename to save under Choose a filename to save under Cannot write file %1 Cannot write file %1 Clean the Palette? Clean the Palette? You will clean all characters from this palette. Are you sure? You will clean all characters from this palette. Are you sure? Character Palette Character Palette &Search &Search Empty the Palette? Empty the Palette? You will remove all characters from this palette. Are you sure? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Hide/Show Enhanced Palette Save Quick Character Palette Save Quick Character Palette You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one You can see a thumbnail if you press and hold down the right mouse button.The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one CharSelectEnhanced Full Character Set Full Character Set Basic Latin Basic Latin Latin-1 Supplement Latin-1 Supplement Latin Extended-A Latin Extended-A Latin Extended-B Latin Extended-B General Punctuation General Punctuation Super- and Subscripts Super- and Subscripts Currency Symbols Currency Symbols Letterlike Symbols Letterlike Symbols Number Forms Number Forms Arrows Arrows Mathematical Operators Mathematical Operators Box Drawing Box Drawing Block Elements Block Elements Geometric Shapes Geometric Shapes Miscellaneous Symbols Miscellaneous Symbols Dingbats Dingbats Small Form Variants Small Form Variants Ligatures Ligatures Specials Specials Greek Greek Greek Extended Greek Extended Cyrillic Cyrillic Cyrillic Supplement Cyrillic Supplement Arabic Arabic Arabic Extended A Arabic Extended A Arabic Extended B Arabic Extended B Hebrew Hebrew Enhanced Character Palette Enhanced Character Palette &Font: &Font: C&haracter Class: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Insert &Code: Type in a four digit unicode value directly here Type in a four digit unicode value directly here Glyphs to Insert Glyphs to Insert Insert the characters at the cursor in the text Insert the characters at the cursor in the text &Insert &Insert Delete the current selection(s). Delete the current selection(s). C&lear C&lear Type in a four digit Unicode value directly here Type in a four digit Unicode value directly here CharStyleComboBox No Style No Style CharTableView Delete Delete CheckDocument Glyphs missing Glyphs missing Text overflow Text overflow Object is not on a Page Object is not on a Page Missing Image Missing Image Object has transparency Object has transparency Object is a PDF Annotation or Field Object is a PDF Annotation or Field Object is a placed PDF Object is a placed PDF Document Document No Problems found No Problems found Page Page Free Objects Free Objects Problems found Problems found Preflight Verifier Preflight Verifier Items Items Problems Problems Current Profile: Current Profile: &Ignore Errors &Ignore Errors Check again Check again Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Image is GIF Image is GIF OK OK Transparency used Transparency used Blendmode used Blendmode used Layer "%1" Layer "%1" Annotation uses a non TrueType font Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Rerun the document scan to check corrections you may have made Empty Image Frame Empty Image Frame Layers Layers Print/Visible Mismatch Issue(s): %1 Master Pages Master Pages Layer Layer Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI CollectForOutput Choose a Directory Choose a Directory Cannot create directory: %1 Cannot create directory: %1 Collecting... Collecting... Cannot collect all files for output for file: %1 Cannot collect all files for output for file: %1 Cannot collect the file: %1 Cannot collect the file: %1 ColorManager Colors Colours &Import &Import &New &New &Edit &Edit D&uplicate D&uplicate &Delete &Delete &Remove Unused &Remove Unused Color Sets Colour Sets Current Color Set: Current Colour Set: &Save Color Set &Save Colour Set Choose a color set to load Choose a colour set to load Save the current color set Save the current colour set Remove unused colors from current document's color set Remove unused colours from current document's colour set Import colors to the current set from an existing document Import colours to the current set from an existing document Create a new color within the current set Create a new colour within the current set Edit the currently selected color Edit the currently selected colour Make a copy of the currently selected color Make a copy of the currently selected colour Delete the currently selected color Delete the currently selected colour Make the current colorset the default color set Make the current colourset the default colour set &Name: &Name: Choose a Name Choose a Name Copy of %1 Copy of %1 New Color New Colour If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management. If colour management is enabled, a triangle warning indicator is a warning the the colour maybe outside of the colour gamut of the current printer profile selected.What this means is the colour may not print exactly as indicated on screen. Spot colours are indicated by a red circle. Registration colours will have a registration mark next to the colour. More hints about gamut warnings are in the online help under Colour Management. Information Information The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. The file %1 does not contain colours which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the colour descriptions are located. This prevents importing colours from some files. See the Edit Colours section of the documentation for more details. Import Import Documents (%1);;Other Files (%2);;All Files (*) Documents (%1);;Other Files (%2);;All Files (*) If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks. If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. Spot colours are indicated by a red circle. More hints about gamut warnings are in the online help under Colour Management. Registration colours will have a registration mark next to the colour. Use Registration only for printers marks and crop marks. All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors Import Colours ColorWheel Monochromatic Monochromatic Analogous Analogous Complementary Complementary Split Complementary Split Complementary Triadic Triadic Tetradic (Double Complementary) Tetradic (Double Complementary) Base Color Base Colour Monochromatic Light Monochromatic Light Monochromatic Dark Monochromatic Dark 1st. Analogous 1st. Analogous 2nd. Analogous 2nd. Analogous 1st. Split 1st. Split 2nd. Split 2nd. Split 3rd. Split 3rd. Split 4th. Split 4th. Split 1st. Triadic 1st. Triadic 2nd. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) 3rd. Tetradic (angle opposite) ColorWheelPlugin &Color Wheel... &Colour Wheel... Color setting helper Colour setting helper Color selector with color theory included. Colour selector with colour theory included. CommonStrings &Apply &Apply &Cancel &Cancel &OK &OK &Save &Save Warning Warning None color name None PDF 3D Annotation PDF 3D Annotation Custom CommonStrings, custom page size Custom Single Page Single Page Double Sided Double Sided 3-Fold 3-Fold 4-Fold 4-Fold Monday Monday Tuesday Tuesday Wednesday Wednesday Thursday Thursday Friday Friday Saturday Saturday Sunday Sunday January January February February March March April April May May June June July July August August September September October October November November December December Yes Yes No No &Yes &Yes &No &No Left Page Left page location Left Page Middle Middle page location Middle Middle Left Middle Left page location Middle Left Middle Right Middle Right page location Middle Right Right Page Right page location Right Page Normal Default single master page Normal Normal Left Default left master page Normal Left Normal Middle Default middle master page Normal Middle Normal Right Default right master page Normal Right Normal Vision Color Blindness - Normal Vision Normal Vision Protanopia (Red) Color Blindness - Red Color Blind Protanopia (Red) Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranopia (Green) Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanopia (Blue) Full Color Blindness Color Blindness - Full Color Blindness Full Colour Blindness Custom: Custom Tab Fill Option Custom: Solid Line Solid Line Dashed Line Dashed Line Dotted Line Dotted Line Dash Dot Line Dash Dot Line Dash Dot Dot Line Dash Dot Dot Line None Optical Margin Setting None Left Protruding Optical Margin Setting Left Protruding Right Protruding Optical Margin Setting Right Protruding Left Hanging Punctuation Optical Margin Setting Left Hanging Punctuation Right Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Default Optical Margin Setting Default Min. Word Tracking Min. Word Tracking Max. Word Tracking Max. Word Tracking Min. Glyph Extension Min. Glyph Extension Max. Glyph Extension Max. Glyph Extension None None RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Greyscale Duotone Colorspace Duotone Unknown Colorspace (Unknown) Unknown PostScript PostScript Text Frame Text Frame Image Frame Image Frame Line Line Polygon Polygon Polyline Polyline Text on a Path Text on a Path Multiple Multiple frame types Multiple PDF Push Button PDF Push Button PDF Text Field PDF Text Field PDF Check Box PDF Check Box PDF Combo Box PDF Combo Box PDF List Box PDF List Box PDF Text Annotation PDF Text Annotation PDF Link Annotation PDF Link Annotation PostScript Level 1 PostScript Level 1 PostScript Level 2 PostScript Level 2 PostScript Level 3 PostScript Level 3 Windows GDI Windows GDI Render Frame Render Frame Default Paragraph Style Default Paragraph Style Default Character Style Default Character Style Default Line Style Default Line Style ContextMenu Preview Settings Preview Settings Paste File... Paste File... Delete Page Delete Page Paste Image from Clipboard Paste Image from Clipboard CopyPageToMasterPageBase Convert Page to Master Page Convert Page to Master Page Name: Name: Copy Applied Master Page Items Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 New Master Page %1 Cpalette Normal Normal Horizontal Gradient Horizontal Gradient Vertical Gradient Vertical Gradient Diagonal Gradient Diagonal Gradient Cross Diagonal Gradient Cross Diagonal Gradient Radial Gradient Radial Gradient Opacity: Opacity: % % Shade: Shade: Edit Line Color Properties Edit Line Colour Properties Edit Fill Color Properties Edit Fill Colour Properties Saturation of color Saturation of colour Normal or gradient fill method Normal or gradient fill method Set the transparency for the color selected Set the transparency for the colour selected Free linear Gradient Free linear Gradient Free radial Gradient Free radial Gradient X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: Move Vector Move Vector Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Transparency Settings Transparency Settings Blend Mode: Blend Mode: Darken Darken Lighten Lighten Multiply Multiply Screen Screen Overlay Overlay Hard Light Hard Light Soft Light Soft Light Difference Difference Color Dodge Colour Dodge Color Burn Colour Burn Hue Hue Saturation Saturation Color Colour Luminosity Luminosity Offsets Offsets X: X: Y: Y: Scaling Scaling Rotation Rotation Angle Angle Pattern Pattern Exclusion Exclusion X-Scale: X-Scale: Y-Scale: Y-Scale: Display only used Colors Display only used Colours Display all colors from the document color list, or only the already used colors Display all colours from the document colour list, or only the already used colours Custom Custom CreateRange Create Range Create Range Number of Pages in Document: Number of Pages in Document: Doc Page Range Doc Page Range Basic Range Selection Basic Range Selection Range of Pages Range of Pages De&lete De&lete Alt+L Alt+L Move &Down Move &Down Alt+D Alt+D Move &Up Move &Up Alt+U Alt+U Add a Range of Pages Add a Range of Pages Consecutive Pages Consecutive Pages Even Pages Even Pages From: From: To: To: &Add To Range &Add To Range Alt+A Alt+A Odd Pages Odd Pages Comma Separated List Comma Separated List Advanced Reordering Advanced Reordering Page Order Page Order Sample Page Order: Sample Page Order: Page Group Size: Page Group Size: &OK &OK Alt+O Alt+O &Cancel &Cancel Alt+C Alt+C CsvDialog CSV Importer Options CSV Importer Options Field delimiter: Field delimiter: (TAB) (TAB) Value delimiter: Value delimiter: First row is a header First row is a header OK OK Cancel Cancel None delimiter None CupsOptions Printer Options Printer Options Option Option Value Value Page Set Page Set All Pages All Pages Even Pages only Even Pages only Odd Pages only Odd Pages only Mirror Mirror Orientation Orientation Portrait Portrait Landscape Landscape N-Up Printing N-Up Printing Page per Sheet Page per Sheet Pages per Sheet Pages per Sheet This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Open Curve Files (*.scu);;All Files (*) Curve Files (*.scu);;All Files (*) Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Save as Cannot write the file: %1 Cannot write the file: %1 Inverts the curve Inverts the curve Resets the curve Resets the curve Switches between linear and cubic interpolation of the curve Switches between linear and cubic interpolation of the curve Loads a curve Loads a curve Saves this curve Saves this curve CustomFDialog Encoding: Encoding: &Compress File &Compress File &Include Fonts &Include Fonts Show Preview Show Preview &Include Color Profiles &Include Colour Profiles Show a preview and information for the selected file Show a preview and information for the selected file Compress the Scribus document on save Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document Include colour profiles when collecting files for the document CvgPlug Importing: %1 Importing: %1 Analyzing File: Analysing File: Group%1 Group%1 Generating Items Generating Items DashEditor Value: Value: Offset: Offset: DeferredTask Cancelled by user Cancelled by user DelColor Delete Color Delete Colour Delete Color: Delete Colour: Replace With: Replace With: DelPages Delete Pages Delete Pages to: to: Delete From: Delete From: DialogsAPI Alert - Scribus DocIm Importing failed Importing failed Importing Word document failed %1 Importing Word document failed %1 DocInfos Document Information Document Information &Title: &Title: &Author: &Author: &Subject: &Subject: &Keywords: &Keywords: Descri&ption: Descri&ption: P&ublisher: P&ublisher: &Contributors: &Contributors: Dat&e: Dat&e: T&ype: T&ype: F&ormat: F&ormat: Identi&fier: Identi&fier: &Source: &Source: &Language: &Language: &Relation: &Relation: Co&verage: Co&verage: Ri&ghts: Ri&ghts: Further &Information Further &Information A person or organisation responsible for making the document available A person or organisation responsible for making the document available A person or organisation responsible for making contributions to the content of the document A person or organisation responsible for making contributions to the content of the document A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc The nature or genre of the content of the document, eg. categories, functions, genres, etc An unambiguous reference to the document within a given context such as ISBN or URI An unambiguous reference to the document within a given context such as ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Information about rights held in and over the document, eg. copyright, patent or trademark Information about rights held in and over the document, eg. copyright, patent or trademark Documen&t Documen&t The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Add a page numbering section to the document. The new section will be added after the currently selected section. Delete the currently selected section. Delete the currently selected section. 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. Page Number Out Of Bounds Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections Document Sections &Add &Add Alt+A Alt+A &Delete &Delete Alt+D Alt+D Name Name Shown Shown From From To To Style Style Start Start DocumentItemAttributes Relates To Relates To Is Parent Of Is Parent Of Is Child Of Is Child Of Text Frames Text Frames Image Frames Image Frames Boolean Boolean Integer Integer String String Real Number Real Number None relationship None None auto add None None types None Document Item Attributes Document Item Attributes &Add &Add Alt+A Alt+A &Copy &Copy Alt+C Alt+C &Delete &Delete Alt+D Alt+D C&lear C&lear Alt+L Alt+L Name Name Type Type Value Value Parameter Parameter Relationship Relationship Relationship To Relationship To Auto Add To Auto Add To DrwPlug Group%1 Group%1 Importing: %1 Importing: %1 Analyzing File: Analysing File: Generating Items Generating Items EPSPlug Importing File: %1 failed! Importing File: %1 failed! Fatal Error Fatal Error Error Error Generating Items Generating Items Analyzing PostScript: Analysing PostScript: Converting of %1 images failed! Converting of %1 images failed! Group%1 Group%1 Importing: %1 Importing: %1 EditToolBar Edit Edit Editor Editor Editor &New &New &Open... &Open... Save &As... Save &As... &Save and Exit &Save and Exit &Exit without Saving &Exit without Saving &Undo &Undo &Redo &Redo Cu&t Cu&t &Copy &Copy &Paste &Paste C&lear C&lear &Get Field Names &Get Field Names &File &File &Edit &Edit JavaScripts (*.js);;All Files (*) JavaScripts (*.js);;All Files (*) Ctrl+N Ctrl+N Ctrl+Z Ctrl+Z Ctrl+X Ctrl+X Ctrl+C Ctrl+C Ctrl-V Ctrl-V EffectsDialog Image Effects Image Effects Options: Options: Color: Colour: Shade: Shade: Brightness: Brightness: Contrast: Contrast: Radius: Radius: Value: Value: Posterize: Posterise: Available Effects Available Effects Blur Blur Brightness Brightness Colorize Colourise Contrast Contrast Grayscale Greyscale Invert Invert Posterize Posterise Sharpen Sharpen >> >> << << Effects in use Effects in use OK OK Cancel Cancel Color 1: Colour 1: Color 2: Colour 2: Color 3: Colour 3: Color 4: Colour 4: Duotone Duotone Tritone Tritone Quadtone Quadtone Curves Curves ExceptHookDialog Script error Script error An exception occured while running the script. &Close &Close Exception &Details >> ExportBitmap File exists. Overwrite? File exists. Overwrite? exists already. Overwrite? exists already. Overwrite? Save as Image Save as Image Insufficient memory for this image size. Insufficient memory for this image size. Error writing the output file(s). Error writing the output file(s). ExportForm &All pages &All pages Change the output directory Change the output directory The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Export only the current page Export only the current page Available export formats Available export formats Choose a Export Directory Choose a Export Directory C&hange... C&hange... &Export to Directory: &Export to Directory: Image &Type: Image &Type: &Quality: &Quality: Export as Image(s) Export as Image(s) Options Options &Resolution: &Resolution: % % dpi dpi Range Range &Current page &Current page &Range &Range Export a range of pages Export a range of pages Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Export all pages Export all pages Resolution of the Images Use 72 dpi for Images intended for the Screen Resolution of the Images Use 72 dpi for Images intended for the Screen The quality of your images - 100% is the best, 1% the lowest quality The quality of your images - 100% is the best, 1% the lowest quality &Size: &Size: Size of the images. 100% for no changes, 200% for two times larger etc. Size of the images. 100% for no changes, 200% for two times larger etc. Image size in Pixels Image size in Pixels TextLabel TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Automatic ExtImageProps Extended Image Properties Extended Image Properties Normal Normal Darken Darken Lighten Lighten Hue Hue Saturation Saturation Color Colour Luminosity Luminosity Multiply Multiply Screen Screen Dissolve Dissolve Overlay Overlay Hard Light Hard Light Soft Light Soft Light Difference Difference Color Dodge Colour Dodge Color Burn Colour Burn Blend Mode: Blend Mode: Opacity: Opacity: % % Name Name Layers Layers Don't use any Path Don't use any Path Paths Paths Exclusion Exclusion Live Preview Live Preview FDialogPreview Size: Size: Title: Title: No Title No Title Author: Author: Unknown Unknown Scribus Document Scribus Document Resolution: Resolution: DPI DPI Colorspace: Colourspace: File Format: File Format: FileLoader Some fonts used by this document have been substituted: Some fonts used by this document have been substituted: was replaced by: was replaced by: FileToolBar File File FontComboH Face: Face: Family: Family: Style: Style: Font Family of Selected Text or Text Frame Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Font Name Font Name Use Font Use Font Family Family Style Style Variant Variant Type Type Format Format Embed in PostScript Embed in PostScript Subset Subset Access Access Used in Doc Used in Doc Path to Font File Path to Font File Unknown font type Unknown Unknown font format Unknown User font preview User System font preview System Click to change the value Click to change the value FontPrefs Available Fonts Available Fonts Font Substitutions Font Substitutions Additional Paths Additional Paths Font Name Font Name Replacement Replacement Choose a Directory Choose a Directory &Available Fonts &Available Fonts Font &Substitutions Font &Substitutions Additional &Paths Additional &Paths &Delete &Delete C&hange... C&hange... A&dd... A&dd... &Remove &Remove Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Use Font Use Font Embed in PostScript Embed in PostScript Subset Subset Path to Font File Path to Font File FontPrefsTab Available Fonts Available Fonts Font Substitutions Font Substitutions Additional Paths Additional Paths &Available Fonts &Available Fonts Font Name Font Name Replacement Replacement &Delete &Delete Font &Substitutions Font &Substitutions C&hange... C&hange... A&dd... A&dd... &Remove &Remove Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Additional &Paths Additional &Paths Choose a Directory Choose a Directory FontPreview Leave preview font preview Leave preview Start searching Start searching Size of the selected font Size of the selected font Woven silk pyjamas exchanged for blue quartz font preview Woven silk pyjamas exchanged for blue quartz User font preview User System font preview System Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name. Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name. Font Name Font Name Doc Doc Type Type Subset Subset Access Access Fonts Preview Fonts Preview &Quick Search: &Quick Search: &Search &Search Alt+S Alt+S &Font Size: &Font Size: Text Text Sample text to display Sample text to display Se&t Se&t Alt+T Alt+T Reset the text Reset the text &Close &Close Alt+C Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default &Default Show Extended Font Information Show Extended Font Information Set the preview text Set the preview text FontPreviewPlugin &Font Preview... &Font Preview... Font Preview dialog Font Preview dialog Sorting, searching and browsing available fonts. Sorting, searching and browsing available fonts. FontReplaceDialog Font Substitution Font Substitution Original Font Original Font Substitution Font Substitution Font Make these substitutions permanent Make these substitutions permanent This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Cancels these font substitutions and stops loading the document. Cancels these font substitutions and stops loading the document. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. If you select OK, then save, these substitutions are made permanent in the document. If you select OK, then save, these substitutions are made permanent in the document. FontSelect Select Alternate Font Select Alternate Font Font Font GradientEditor Position: Position: % % Add, change or remove color stops here Add, change or remove colour stops here GradientEditorBase Frame Frame Position: Position: % % Color: Colour: Opacity: Opacity: Shade: Shade: GradientPreview Add Stop Add Stop Remove Stop Remove Stop GradientVectorDialog Gradient Vector Gradient Vector GuideManager &Single &Single Horizontals Horizontals &Add &Add Alt+A Alt+A D&elete D&elete Alt+E Alt+E Verticals Verticals A&dd A&dd Alt+D Alt+D De&lete De&lete Alt+L Alt+L &Lock Guides &Lock Guides Appl&y to All Pages Appl&y to All Pages Alt+Y Alt+Y &Column/Row &Column/Row &Number: &Number: U&se Gap: U&se Gap: Alt+S Alt+S Refer To Refer To &Page &Page Alt+P Alt+P M&argins M&argins S&election S&election Nu&mber: Nu&mber: Use &Gap: Use &Gap: Alt+G Alt+G &Misc &Misc Delete all guides from the current page Delete all guides from the current page Delete Guides from Current &Page Delete Guides from Current &Page Delete all guides from the current document Delete all guides from the current document Delete Guides from &All Pages Delete Guides from &All Pages Guide Manager Guide Manager Add a new horizontal guide Add a new horizontal guide Delete the selected horizontal guide Delete the selected horizontal guide Add a new vertical guide Add a new vertical guide Delete the selected vertical guide Delete the selected vertical guide Lock the guides Lock the guides Apply to all pages Apply to all pages Number of horizontal guides to create Number of horizontal guides to create Number of vertical guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides shown on the current page Delete all guides from all pages Delete all guides from all pages Refer to Refer to HelpBrowser Scribus Online Help Scribus Online Help &Contents &Contents &Search &Search Find Find Search Term: Search Term: Se&arch Se&arch &New &New &Delete &Delete Book&marks Book&marks &Print... &Print... New Bookmark New Bookmark New Bookmark's Title: New Bookmark's Title: &File &File &Find... &Find... Find &Next Find &Next Find &Previous Find &Previous &Edit &Edit Navigation Navigation Loading Failed Loading Failed &Add Bookmark &Add Bookmark D&elete All D&elete All &Bookmarks &Bookmarks Scribus Help Scribus Help Searching is case insensitive Searching is case insensitive 1 1 &Exit &Exit Find &Next... Find &Next... Find &Previous... Find &Previous... &Add &Add &Quit &Quit <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HelpBrowser2 Dialog Dialog &Contents &Contents 1 1 Se&arch Se&arch Searching is case insensitive Searching is case insensitive &Search &Search Book&marks Book&marks HelpBrowserNavigation Form Form &Contents &Contents Se&arch Se&arch Searching is case insensitive Searching is case insensitive &Search &Search 1 1 Book&marks Book&marks &New &New &Delete &Delete D&elete All D&elete All HyAsk Possible Hyphenation Possible Hyphenation Accept Accept Skip Skip Cancel Cancel Add to the Exception List Add to the Exception List Add to the Ignore List Add to the Ignore List HySettings Ignore List Ignore List Add a new Entry Add a new Entry Edit Entry Edit Entry Exception List Exception List ImageInfoDialog Image Info Image Info General Info General Info Date / Time: Date / Time: Has Embedded Profile: Has Embedded Profile: Profile Name: Profile Name: Has Embedded Paths: Has Embedded Paths: Has Layers: Has Layers: EXIF Info EXIF Info Artist: Artist: Comment: Comment: User Comment: User Comment: Camera Model: Camera Model: Camera Manufacturer: Camera Manufacturer: Description: Description: Copyright: Copyright: Scanner Model: Scanner Model: Scanner Manufacturer: Scanner Manufacturer: Exposure time Exposure time Aperture: Aperture: ISO equiv.: ISO equiv.: ImportAIPlugin Import AI... Import AI... Imports Illustrator Files Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported The file could not be imported ImportCgmPlugin Import Cgm... Import Cgm... CGM File CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. Imports most Cgm files into the current document, converting their vector data into Scribus objects. Imports most Cgm files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportCvgPlugin Import Cvg... Import Cvg... Imports Cvg Files Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportIdml Imports Adobe Idml Packages Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL GPL Adobe Indesign IDML Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats All Supported Formats ImportPSPlugin Import PostScript... Import PostScript... Imports PostScript Files Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Import Pict... Imports Pict Files Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportWpgPlugin Import WPG... Import WPG... Imports WPG Files Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportXarPlugin Import Pict... Import Pict... Import Xara... XARA "*.xar" File XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportXfigPlugin Import Xfig... Import Xfig... Imports Xfig Files Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. Imports most Xfig files into the current document,converting their vector data into Scribus objects. All Supported Formats All Supported Formats Imposition Portrait Portrait Landscape Landscape ImpositionBase Imposition Imposition Gri&d Gri&d Copies Copies Do&uble sided Do&uble sided Alt+U Alt+U Front side Front side Back side Back side &Booklet &Booklet Pages per sheet Pages per sheet 4 4 8 8 16 16 Pages Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Fold Front page from Front page from Double sided Double sided Back page from Back page from Destination page Destination page Size Size Orientation Orientation Width Width Height Height Preview Preview Refresh preview Refresh preview &OK &OK Alt+G Alt+G &Cancel &Cancel Alt+C Alt+C ImpositionPlugin &Imposition... &Imposition... Imposition dialog Imposition dialog Imposition on grids, booklets and folds Imposition on grids, booklets and folds InsPage Insert Page Insert Page before Page before Page after Page after Page at End at End Page(s) Page(s) &Insert &Insert &Master Page: &Master Page: Page Size Page Size &Size: &Size: Orie&ntation: Orie&ntation: Portrait Portrait Landscape Landscape &Width: &Width: &Height: &Height: Move Objects with their Page Move Objects with their Page Master Pages Master Pages InsertAFrame Open Open <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the simple Story Editor. <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the simple Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert A Frame Insert A Frame T&ype T&ype &Text Frame &Text Frame &Image Frame &Image Frame &Location &Location Page Placement Page Placement Current Page Current Page All Pages All Pages ... ... Position of Frame Position of Frame Top Left of Margins Top Left of Margins Top Left of Page Top Left of Page Top Left of Bleed Top Left of Bleed X: X: Y: Y: &Size &Size Same as the Page Margins Same as the Page Margins Same as the Page Same as the Page Same as the Bleed Same as the Bleed Same as the Imported Image Same as the Imported Image Height: Height: Width: Width: &Options &Options Source Image: Source Image: There are no options for this type of frame There are no options for this type of frame Columns: Columns: Gap: Gap: Link Created Frames Link Created Frames Source Document: Source Document: Range of Pages Range of Pages Custom Position Custom Position Custom Size Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more text frames Insert one or more image frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert the frame on the current page only Insert one frame for each existing page Insert one frame for each existing page Insert frames on a range of pages Insert frames on a range of pages Range of pages to insert frames on Range of pages to insert frames on Position the new frame in relation to the page Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Insert the frame at a custom position on the page Top position of the inserted frame Top position of the inserted frame Left position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Insert the new frame with a custom size Width of the inserted frame Width of the inserted frame Height of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Number of columns for the inserted text frame Distance between the columns in the text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link the inserted text frames together to form a chain of frames Link Inserted Frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link the first inserted frame to a preexisting text frame Link to Existing Frame Link to Existing Frame Name of existing text frame to link to Name of existing text frame to link to Source document to load into the text frame Source document to load into the text frame Source image to load into the inserted image frame Source image to load into the inserted image frame InsertTable Insert Table Insert Table Number of rows: Number of rows: Number of columns: Number of columns: JavaDocs New Script New Script Edit JavaScripts Edit JavaScripts &Edit... &Edit... &Add... &Add... &Delete &Delete &Close &Close &New Script: &New Script: Do you really want to delete this script? Do you really want to delete this script? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. LatexEditor Dialog Dialog Enter Code: Enter Code: Update Update Revert Revert Program Messages: Program Messages: <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></body></html> Status: Unknown Status: Unknown Kill Program Kill Program Options Options Resolution: Resolution: Automatic Automatic DPI DPI Program: Program: LaTeX LaTeX Use Preamble Use Preamble Update Application Settings Update Application Settings Fonts and Colors Fonts and Colours Will be filled later Will be filled later Status: Status: Error Error Finished Finished Running Running No item selected! No item selected! Insert symbol Insert symbol Editor Editor Information Information An editor for this frame is already running! An editor for this frame is already running! Editor running! Editor running! Please specify an editor in the preferences! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Could not create a temporary file to run the external editor! Run External Editor... Run External Editor... Running the editor failed with exitcode %d! Running the editor failed with exitcode %d! Running the editor "%1" failed! Running the editor "%1" failed! Run external editor... Run external editor... Insert Symbol Insert Symbol LayerPalette Layers Layers Delete Layer Delete Layer Name Name Do you want to delete all objects on this layer too? Do you want to delete all objects on this layer too? Add a new layer Add a new layer Delete layer Delete layer Raise layer Raise layer Lower layer Lower layer Opacity: Opacity: % % Blend Mode: Blend Mode: Normal Normal Darken Darken Lighten Lighten Multiply Multiply Screen Screen Overlay Overlay Hard Light Hard Light Soft Light Soft Light Difference Difference Color Dodge Colour Dodge Color Burn Colour Burn Exclusion Exclusion Hue Hue Saturation Saturation Color Colour Luminosity Luminosity Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Colour of the Layer Indicator - Each layer has a colour assigned to display on the canvas when layer indicators are enabled. You can double click to edit the colour. Make Layer Visible - Uncheck to hide the layer from the display Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Lock or Unlock Layer - Unchecked is unlocked Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Name of the Layer - Double clicking on the name of a layer enabled editing Name of the Layer - Double clicking on the name of a layer enabled editing Duplicates the current layer Duplicates the current layer Selects the Blendmode, works only in PDF 1.4 Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer Add a New Layer Duplicate the Current Layer Duplicate the Current Layer Raise Layer Raise Layer Lower Layer Lower Layer Name of the Layer - Double click on the name of a layer to edit the name Name of the Layer - Double click on the name of a layer to edit the name LegacyMode All Files (*) All Files (*) Open Open All Supported Formats All Supported Formats LensDialogBase Optical Lens Optical Lens Add Lens Add Lens Remove Lens Remove Lens + + - - Lens Parameters Lens Parameters X Pos: X Pos: Y Pos: Y Pos: Radius: Radius: Strength: Strength: Add a new lens Add a new lens &Add Lens &Add Lens Remove selected lens Remove selected lens &Remove Lens &Remove Lens Zoom In Zoom In Zoom Out Zoom Out &X Pos: &X Pos: Horizontal position of the lens Horizontal position of the lens &Y Pos: &Y Pos: Vertical position of the lens Vertical position of the lens The selected lens acts like a magnification lens The selected lens acts like a magnification lens &Magnification Lens &Magnification Lens The selected lens acts like a fish eye lens The selected lens acts like a fish eye lens &Fish Eye Lens &Fish Eye Lens Ra&dius: Ra&dius Radius of the lens Radius of the lens &Strength: &Strength Strength of the lens Strength of the lens LensEffectsPlugin Lens Effects... Lens Effects... Path Tools Path Tools Lens Effects Lens Effects Apply fancy lens effects Apply fancy lens effects LoadSavePlugin All Files (*) All Files (*) An error occured while opening file or file is damaged An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found No File Loader Plugins Found LoremManager Select Lorem Ipsum Select Lorem Ipsum Author: Author: Get More: Get More: XML File: XML File: Lorem Ipsum Lorem Ipsum Paragraphs: Paragraphs: Alt+O Alt+O Alt+C Alt+C Standard Lorem Ipsum Standard Lorem Ipsum Random Paragraphs Random Paragraphs Number of paragraphs of selected sample text to insert Number of paragraphs of selected sample text to insert List of languages available to insert sample text in List of languages available to insert sample text in MarginDialog Margin Guides Margin Guides Manage Page Properties Manage Page Properties Page Size Page Size &Size: &Size: Orie&ntation: Orie&ntation: Portrait Portrait Landscape Landscape &Width: &Width: &Height: &Height: Move Objects with their Page Move Objects with their Page Type: Type: Other Settings Other Settings Master Page: Master Page: Size of the inserted pages, either a standard or custom size. Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Orientation of the page(s) to be inserted Width of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget &Bottom: &Bottom: &Top: &Top: &Right: &Right: &Left: &Left: Distance between the top margin guide and the edge of the page Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page &Inside: &Inside: O&utside: O&utside: Preset Layouts: Preset Layouts: Apply the margin changes to all existing pages in the document Apply the margin changes to all existing pages in the document Printer Margins... Printer Margins... Import the margins for the selected page size from the available printers. Import the margins for the selected page size from the available printers. Apply settings to: Apply settings to: All Document Pages All Document Pages All Master Pages All Master Pages Apply the margin changes to all existing master pages in the document Apply the margin changes to all existing master pages in the document Margin Guides Margin Guides Top: Top: Bottom: Bottom: Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page Bleeds Bleeds Inside: Inside: Outside: Outside: Left: Left: Right: Right: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages Edit Master Pages Do you really want to delete this master page? Do you really want to delete this master page? &Name: &Name: New Master Page New Master Page Name: Name: New MasterPage New MasterPage Copy #%1 of Copy #%1 of Duplicate the selected master page Duplicate the selected master page Delete the selected master page Delete the selected master page Add a new master page Add a new master page Import master pages from another document Import master pages from another document New Master Page %1 New Master Page %1 Unable to Rename Master Page Unable to Rename Master Page The Normal page is not allowed to be renamed. The Normal page is not allowed to be renamed. Rename Master Page Rename Master Page New Name: New Name: Copy #%1 of %2 Copy #%1 of %2 This master page is used at least once in the document. This master page is used at least once in the document. Do you really want to delete master page "%1"? Do you really want to delete master page "%1"? Measurements Distances Distances X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: Angle: Length: Length: ° ° MeasurementsBase Distances Distances X1: X1: 10000.0000 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: Length: DX: DX: DY: DY: Angle: Angle: Unit: Unit: MergeDoc Open Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Import Page(s) Import Page(s) from 0 from 0 Create Page(s) Create Page(s) from %1 from %1 Import Master Page Import Master Page &From Document: &From Document: Chan&ge... Chan&ge... &Import Page(s): &Import Page(s): &Import Master Page &Import Master Page Before Page Before Page After Page After Page At End At End &Import &Import Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. &Select... &Select... MeshDistortionDialog Dialog Dialog + + - - Mesh Distortion Mesh Distortion Drag the red handles with the mouse to distort the mesh Drag the red handles with the mouse to distort the mesh Zoom In Zoom In Zoom Out Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. Resets the selected handles to their initial position.If no handle is selected all handles will be reset. &Reset &Reset MeshDistortionPlugin Mesh Distortion... Mesh Distortion... Path Tools Path Tools Mesh Distortion of Polygons Mesh Distortion of Polygons MissingFont Missing Font Missing Font The Font %1 is not installed. The Font %1 is not installed. Use Use instead instead ModeToolBar Tools Tools Properties... Properties... MovePages Move Pages Move Pages Copy Page Copy Page Move Page(s): Move Page(s): Move Page(s) Move Page(s) Before Page Before Page After Page After Page At End At End To: To: Number of copies: Number of copies: Number of Copies: Number of Copies: MultiProgressDialog Progress Progress Overall Progress: Overall Progress: &Cancel &Cancel %v of %m %v of %m MultipleDuplicate &Horizontal Shift: &Horizontal Shift: &Vertical Shift: &Vertical Shift: &Horizontal Gap: &Horizontal Gap: &Vertical Gap: &Vertical Gap: Multiple Duplicate Multiple Duplicate &By Number of Copies &By Number of Copies &Number of Copies: &Number of Copies: &Shift Created Items By &Shift Created Items By Alt+S Alt+S Create &Gap Between Items Of Create &Gap Between Items Of Alt+G Alt+G Rotation: Rotation: By &Rows && Columns By &Rows && Columns Vertical Gap: Vertical Gap: Horizontal Gap: Horizontal Gap: Number of Rows: Number of Rows: Number of Columns: Number of Columns: &OK &OK &Cancel &Cancel MyPlugin My &Plugin My &Plugin MyPluginImpl Scribus - My Plugin Scribus - My Plugin The plugin worked! The plugin worked! NewDoc New Document New Document Portrait Portrait Landscape Landscape Margin Guides Margin Guides Options Options Document page size, either a standard size or a custom size Document page size, either a standard size or a custom size Orientation of the document's pages Orientation of the document's pages Width of the document's pages, editable if you have chosen a custom page size Width of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Default unit of measurement for document editing Default unit of measurement for document editing Create text frames automatically when new pages are added Create text frames automatically when new pages are added Distance between automatically created columns Distance between automatically created columns Number of columns to create in automatically created text frames Number of columns to create in automatically created text frames &Size: &Size: Orie&ntation: Orie&ntation: &Width: &Width: &Height: &Height: &Default Unit: &Default Unit: &Automatic Text Frames &Automatic Text Frames &Gap: &Gap: New from Template New from Template Open Existing Document Open Existing Document Open Recent Document Open Recent Document Colu&mns: Colu&mns: Do not show this dialog again Do not show this dialog again Initial number of pages of the document Initial number of pages of the document N&umber of Pages: N&umber of Pages: Open Open &New Document &New Document Open &Existing Document Open &Existing Document Open Recent &Document Open Recent &Document First Page is: First Page is: Show Document Settings After Creation Show Document Settings After Creation Document Layout Document Layout New &from Template New &from Template NewFromTemplatePlugin New &from Template... New &from Template... Load documents with predefined layout Load documents with predefined layout Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). NewMarginWidget Form Form Preset Layouts: Preset Layouts: Left: Left: Right: Right: Top: Top: Bottom: Bottom: Link Link Printer Margins... Printer Margins... Distance between the top margin guide and the edge of the page Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: &Inside: &Left: &Left: O&utside: O&utside: &Right: &Right: NodePalette Nodes Nodes Move Nodes Move Nodes Move Control Points Move Control Points Add Nodes Add Nodes Delete Nodes Delete Nodes Reset Control Points Reset Control Points Reset this Control Point Reset this Control Point &Absolute Coordinates &Absolute Coordinates &X-Pos: &X-Pos: &Y-Pos: &Y-Pos: Edit &Contour Line Edit &Contour Line &Reset Contour Line &Reset Contour Line &End Editing &End Editing Move Control Points Independently Move Control Points Independently Move Control Points Symmetrical Move Control Points Symmetrical Open a Polygon or Cuts a Bezier Curve Open a Polygon or Cuts a Bezier Curve Close this Bezier Curve Close this Bezier Curve Mirror the Path Horizontally Mirror the Path Horizontally Mirror the Path Vertically Mirror the Path Vertically Shear the Path Horizontally to the Left Shear the Path Horizontally to the Left Shear the Path Vertically Up Shear the Path Vertically Up Shear the Path Vertically Down Shear the Path Vertically Down Rotate the Path Counter-Clockwise Rotate the Path Counter-Clockwise Rotate the Path Clockwise Rotate the Path Clockwise Enlarge the Size of the Path by shown % Enlarge the Size of the Path by shown % Angle of Rotation Angle of Rotation Activate Contour Line Editing Mode Activate Contour Line Editing Mode Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % Shrink the Size of the Path by shown % Reduce the Size of the Path by the shown value Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By % to Enlarge or Shrink By Value to Enlarge or Shrink By Value to Enlarge or Shrink By Set Contour to Image Clip Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image Reset the Contour Line to the Clipping Path of the Image Lens Effects... Lens Effects... Apply fancy Lens Effects Apply fancy Lens Effects to Canvas to Canvas to Page to Page Set Shape to Image Clip Set Shape to Image Clip Set the Shape to the Clipping Path of the Image Set the Shape to the Clipping Path of the Image OODPlug This document does not seem to be an OpenOffice Draw file. This document does not seem to be an OpenOffice Draw file. Group%1 Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... Import &OpenOffice.org Draw... Imports OpenOffice.org Draw Files Imports OpenOffice.org Draw Files Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features This file contains some unsupported features The file could not be imported The file could not be imported OSGEditor 3D Properties 3D Properties Load Model ... Load Model ... Clear Model Clear Model Views Views Name: Name: Options Options Renderstyle: Renderstyle: Solid Solid Solid Wireframe Solid Wireframe Transparent Transparent Transparent Wireframe Transparent Wireframe BoundingBox BoundingBox Wireframe Wireframe Shaded Wireframe Shaded Wireframe Hidden Wireframe Hidden Wireframe Vertices Vertices Shaded Vertices Shaded Vertices Illustration Illustration Solid Outline Solid Outline Shaded Illustration Shaded Illustration Line Color: Line Color: Face Color: Face Color: Opacity: Opacity: % % Lightning: Lightning: Render Style: Render Style: Bounding Box Bounding Box Transparent Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Transparent Bounding Box Outline Lighting: Lighting: None None Headlamp Headlamp White White Day Day Night Night Hard Hard Primary Primary Blue Blue Red Red Cube Cube CAD CAD Artwork Artwork Field of Vision Field of Vision Angle: Angle: Add View... Add View... Remove View Remove View OSGEditorDialog Default Default Add a new View Add a new View Name: Name: New View New View All Supported Formats (%1);;All Files (*) All Supported Formats (%1);;All Files (*) Import 3-D Model Import 3-D Model OdtDialog Use document name as a prefix for paragraph styles Use document name as a prefix for paragraph styles Do not ask again Do not ask again OK OK Enabling this will overwrite existing styles in the current Scribus document Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Prepend the document name to the paragraph style name in Scribus. Prepend the document name to the paragraph style name in Scribus. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Overwrite Paragraph Styles Overwrite Paragraph Styles OpenDocument Importer Options OpenDocument Importer Options Cancel Cancel OldScribusFormat Scribus Document Scribus Document Scribus 1.2.x Document Scribus 1.2.x Document OneClick Origin Origin Size Size Width: Width: Length: Length: Height: Height: Angle: Angle: Remember Values Remember Values OpenPalette empty palette empty palette OpenPaletteModel Elements Elements Visible Visible OutlinePalette Element Element Name "%1" isn't unique.<br/>Please choose another. Name "%1" isn't unique.<br/>Please choose another. Group Group Page Page Free Objects Free Objects Outline Outline Enter a keyword or regular expression to filter the outline. Enter a keyword or regular expression to filter the outline. Ctrl+f Filter the Outline using a keyword Ctrl+f Filter: Filter: Ctrl+F Filter the Outline using a keyword Ctrl+F OutlineValues % % Linewidth Linewidth PDFExportDialog Save as PDF Save as PDF O&utput to File: O&utput to File: Cha&nge... Cha&nge... Output one file for eac&h page Output one file for eac&h page &Save &Save The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. Save as Save as PDF Files (*.pdf);;All Files (*) PDF Files (*.pdf);;All Files (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. %1 does not exists and will be created, continue? %1 does not exists and will be created, continue? Cannot create directory: %1 Cannot create directory: %1 Save As Save As PDFLibCore Saving PDF Saving PDF Exporting Master Page: Exporting Master Page: Exporting Page: Exporting Page: Exporting Items on Current Page: Exporting Items on Current Page: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: Page: Date: Date: Failed to load an image : %1 Failed to load an image : %1 Failed to write an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Failed to load an image mask : %1 Insufficient memory for processing an image Insufficient memory for processing an image A write error occured, please check available disk space A write error occured, please check available disk space A write error occurred, please check available disk space A write error occurred, please check available disk space PDFToolBar PDF Tools PDF Tools PPreview Print Preview Print Preview All All Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Gives a print preview using simulations of generic CMYK inks, instead of RGB colours Enable/disable the C (Cyan) ink plate Enable/disable the C (Cyan) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the K (Black) ink plate Enable/disable the K (Black) ink plate Display Trans&parency Display Trans&parency &Display CMYK &Display CMYK &C &C &M &M &Y &Y &K &K &Under Color Removal &Under Colour Removal Separation Name Separation Name Cyan Cyan Magenta Magenta Yellow Yellow Black Black Scaling: Scaling: Print... Print... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. Resize the scale of the page. Close Close File File Force Overprint Mode Force Overprint Mode Enable &Antialiasing Enable &Antialiasing Fit to Width Fit to Width Fit to Height Fit to Height Fit to Page Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings Display Settings Print Settings Print Settings Mirror Page(s) Horizontal Mirror Page(s) Horizontal Mirror Page(s) Vertical Mirror Page(s) Vertical Clip to Page Margins Clip to Page Margins Print in Grayscale Print in Greyscale Convert Spot Colors Convert Spot Colours Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. Enables global Overprint Mode for this document, overrides object settings Enables global Overprint Mode for this document, overrides object settings Apply Color Profiles Apply Colour Profiles Allows you to embed color profiles in the print stream when color management is enabled Allows you to embed colour profiles in the print stream when colour management is enabled Clip to Printer Margins Clip to Printer Margins Display Ink Coverage Display Ink Coverage Threshold: Threshold: % % None None PSLib Processing Master Page: Processing Master Page: Exporting Page: Exporting Page: Failed to write data for an image Failed to write data for an image Failed to load an image : %1 Failed to load an image : %1 Failed to load an image mask : %1 Failed to load an image mask : %1 Insufficient memory for processing an image Insufficient memory for processing an image PageItem Image Image Text Text Line Line Polygon Polygon Polyline Polyline PathText PathText Copy of Copy of PageItemAttributes Relates To Relates To Is Parent Of Is Parent Of Is Child Of Is Child Of None relationship None Page Item Attributes Page Item Attributes &Add &Add Alt+A Alt+A &Copy &Copy Alt+C Alt+C &Delete &Delete Alt+D Alt+D C&lear C&lear Alt+L Alt+L &OK &OK &Cancel &Cancel Name Name Type Type Value Value Parameter Parameter Relationship Relationship Relationship To Relationship To Attributes Attributes PageItem_ImageFrame Picture Picture Preview Settings Preview Settings Image Image Embedded Image Embedded Image File: File: Original PPI: Original PPI: Actual PPI: Actual PPI: Size: Size: Colorspace: Colourspace: Unknown Unknown Page: Page: Pages: Pages: Embedded Image missing Embedded Image missing missing missing No Image Loaded No Image Loaded PageItem_LatexFrame Latex Latex \section*{Manual} Your \LaTeX-frames setup is working when you can read this text!\\ Placing formulas is very easy:\\ Right click $\Rightarrow$ Edit Latex Source\\ And replace this text with your own. Here is an example: \begin{verbatim}\[J = \int r^2 \mathrm{d}m\]\end{verbatim} becomes \[J = \int r^2 \mathrm{d}m\] \section*{Manual} Your \LaTeX-frames setup is working when you can read this text!\\ Placing formulas is very easy:\\ Right click $\Rightarrow$ Edit Latex Source\\ And replace this text with your own. Here is an example: \begin{verbatim}\[J = \int r^2 \mathrm{d}m\]\end{verbatim} becomes \[J = \int r^2 \mathrm{d}m\] Error Error Running the external application failed! Running the external application failed! Could not create a temporary file to run the application! Could not create a temporary file to run the application! Information Information Please specify a latex executable in the preferences! Please specify a latex executable in the preferences! An editor for this frame is already running! An editor for this frame is already running! Please specify an editor in the preferences! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Could not create a temporary file to run the external editor! Running the editor failed with exitcode %d! Running the editor failed with exitcode %d! Running the editor "%1" failed! Running the editor "%1" failed! Running the application "%1" failed! Running the application "%1" failed! Latex-Frame Latex-Frame Command: Command: DPI: DPI: Status: Status: OK OK Running Running Errorcode Errorcode The application "%1" failed to start! The application "%1" failed to start! The application "%1" crashed! The application "%1" crashed! Application Application DPI DPI State State Finished Finished Render Render This is usually a problem with your input. Please check the program's output. This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? Do you want to open the editor to fix the problem? The config file didn't specify a executable path! The config file didn't specify a executable path! The application "%1" failed to start! Please check the path: The application "%1" failed to start! Please check the path: Render Frame Render Frame No configuration defined to run the application! No configuration defined to run the application! No application defined No application defined Rendering... Rendering... Render Error Render Error PageItem_OSGFrame OSG OSG Default Default 3D Model 3D Model File: File: PageItem_PathText Paragraphs: Paragraphs: Lines: Lines: Words: Words: Chars: Chars: PageItem_TextFrame Linked Text Linked Text Text Frame Text Frame Paragraphs: Paragraphs: Lines: Lines: Words: Words: Chars: Chars: PageLayouts First Page is: First Page is: Document Layout Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Number of pages to show side-by-side on the canvasOften used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed Location on the canvas where the first page of the document is placed PagePalette Drag pages or master pages onto the trashbin to delete them Drag pages or master pages onto the trashbin to delete them Here are all your master pages. To create a new page, drag a master page to the page view below Here are all your master pages. To create a new page, drag a master page to the page view below Arrange Pages Arrange Pages Available Master Pages: Available Master Pages: Document Pages: Document Pages: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. This master page is used at least once in the document. This master page is used at least once in the document. Do you really want to delete this master page? Do you really want to delete this master page? PageSelector %1 of %2 %1 of %2 Go to the first page Go to the first page Go to the previous page Go to the previous page Go to the next page Go to the next page Go to the last page Go to the last page Select the current page Select the current page of %1 number of pages in document of %1 ParaStyleComboBox No Style No Style PathAlongPathPlugin Path Along Path... Path Along Path... Path Tools Path Tools Bends a Polygon along a Polyline Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Connect Paths Connect first Line Connect first Line Starting Point Starting Point End Point End Point with second Line with second Line with: with: a straight Line a straight Line Points moving Points moving Preview on Canvas Preview on Canvas Connect First Line Connect First Line with Second Line with Second Line by using: by using: PathConnectPlugin Connect Paths Connect Paths Path Tools Path Tools Connect 2 Polylines. Connect 2 Polylines. PathCutPlugin Cut Polygon Cut Polygon Path Tools Path Tools Cuts a Polygon by a Polyline Cuts a Polygon by a Polyline Qt Version too old Qt Version too old This plugin requires at least version 4.3.3 of the Qt library This plugin requires at least version 4.3.3 of the Qt library Error Error The cutting line must cross the polygon and both end points must lie outside of the polygon The cutting line must cross the polygon andboth end points must lie outside of the polygon PathDialogBase Path along Path Path along Path Effect Type Effect Type Single Single Single, stretched Single, stretched Repeated Repeated Repeated, stretched Repeated, stretched Horizontal Offset Horizontal Offset Vertical Offset Vertical Offset Gap between Objects Gap between Objects Preview on Canvas Preview on Canvas Rotate Objects by: Rotate Objects by: 90° 90° 180° 180° 270° 270° PathFinderBase Boolean Path Operations Boolean Path Operations Keep a copy of the original Item after applying the operation Keep a copy of the original Item after applying the operation keep keep + + = = Operation Operation ... ... Swap Shapes Swap Shapes Options Options Result gets Color of: Result gets Colour of: first Shape first Shape second Shape second Shape First source shape. First source shape. Second source shape. Second source shape. The resulting shape. The resulting shape. Unites the shapes Unites the shapes Intersection of the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Custom Colours Stroke: Stroke: Fill: Fill: Keep a copy of the original item after applying the operation Keep a copy of the original item after applying the operation Keep Keep Subtracts the second shape from the first shape Subtracts the second shape from the first shape Exchange the Source Shapes Exchange the Source Shapes Result takes color from: Result takes colour from: The resulting shape uses the color of the first source shape The resulting shape uses the colour of the first source shape First Shape First Shape The resulting shape uses the color of the second source shape The resulting shape uses the colour of the second source shape Second Shape Second Shape The resulting shape uses the colors listed below The resulting shape uses the colours listed below Stroke Color Stroke Colour Fill Color Fill Colour Result Takes Color from: Result Takes Colour from: PathFinderDialog Result gets Color of: Result gets Colour of: Intersection gets Color of: Intersection gets Colour of: PathFinderPlugin Path Operations... Path Operations... Path Tools Path Tools Path Operations Path Operations Apply fancy boolean operations to paths. Apply fancy boolean operations to paths. Qt Version too old Qt Version too old This plugin requires at least version 4.3.3 of the Qt library This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Create Path from Stroke Path Tools Path Tools Converts the stroke of a Path to a filled Path. Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Choose a Directory Loading Patterns Loading Patterns All Files (*) All Files (*) Open Open Patterns Patterns Load Load Load Set Load Set Remove Remove Remove All Remove All OK OK Cancel Cancel &Name: &Name: Rename Entry Rename Entry All Supported Formats All Supported Formats Rename Rename PatternPropsDialog Pattern Properties Pattern Properties pt pt % % Offsets Offsets X: X: Y: Y: Scaling Scaling X-Scale: X-Scale: Y-Scale: Y-Scale: Rotation Rotation Skewing Skewing Spacing Value: Value: X-Skew: Y-Skew: Angle: Angle: Flip: Flip: Close Close PctPlug Importing: %1 Importing: %1 Analyzing File: Analysing File: Group%1 Group%1 Generating Items Generating Items PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Size: Size: Resolution: Resolution: DPI DPI Unknown Unknown Colorspace: Colourspace: Result Result Search Results for: Search Results for: &Preview &Preview Alt+P Alt+P &Select &Select Alt+S Alt+S Cancel Cancel PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Cancel Search Start Search Start Search Select a base directory for search Select a base directory for search Scribus - Image Search Scribus - Image Search The search failed: %1 The search failed: %1 Search Images Search Images Search for: Search for: Start at: Start at: Change... Change... Searching Searching Case insensitive search Case insensitive search Search recursively Search recursively Base directory for search does not exist. Please choose another one. Base directory for search does not exist.Please choose another one. PicStatus Goto Goto Manage Pictures Manage Pictures Scribus - Image Search Scribus - Image Search No images named "%1" were found. No images named "%1" were found. Close Close Not on a Page Not on a Page JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD emb. PSD Unknown Unknown n/a n/a Information Information Path: Path: Search... Search... Name: Name: Image Image DPI: DPI: Format: Format: Colorspace: Colourspace: Size Size Pixels: Pixels: Scale: Scale: Printed: Printed: Layout Layout On Page: On Page: eff. DPI: eff. DPI: Object: Object: Select Select Image Tools Image Tools Image Visible Image Visible Image Effects... Image Effects... Edit Image... Edit Image... Print Image Print Image Extended Image Properties... Extended Image Properties... Sort by Name Sort by Name Sort by Page Sort by Page Manage Images Manage Images Go to Go to Name of the image file Name of the image file Location where the image file is stored Location where the image file is stored Search for a missing image Search for a missing image Type of the image Type of the image The colorspace of the image The colourspace of the image Colorspace used within the image, eg RGB or CMYK Colourspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Native resolution of the image, in dots per inch Height and width of the image Height and width of the image Horizontal and vertical scaling applied to the image Horizontal and vertical scaling applied to the image Size of the image when printed Size of the image when printed Page that the image is displayed on Page that the image is displayed on Page Item: Page Item: Name of the page item that contains the image Name of the page item that contains the image Effective DPI: Effective DPI: Effective resolution of the image after scaling Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the image is on Move to the page that the item is on and select it Move to the page that the item is on and select it Enable or disable exporting of the item Enable or disable exporting of the item Export/Print Image Export/Print Image Set format specfic properties of certain image types, like clipping paths Set format specfic properties of certain image types, like clipping paths Edit the image in the default editor Edit the image in the default editor Make the image visible or invisible Make the image visible or invisible Apply non destructive effects to the image in its frame Apply non destructive effects to the image in its frame Embedded Image Embedded Image PictureBrowser Scribus Picture Browser Scribus Picture Browser Folder Browser Folder Browser Collection Browser Collection Browser Document Browser Document Browser Include Subdirectories Include Subdirectories Create new category Create new category New collection New collection Delete selected collection Delete selected collection Edit selected collection Edit selected collection Add selected images to collection(s) Add selected images to collection(s) Remove selected images from current collection Remove selected images from current collection Tag selected images Tag selected images Import collection/collectionset Import collection/collectionset Export collection/collectionset Export collection/collectionset add selected images to collections add selected images to collections go to page go to page More More Always on Top Always on Top Sort by Name Sort by Name Sort by Date Sort by Date Sort by Size Sort by Size Sort by Type Sort by Type Change sortorder Change sortorder Zoom in Zoom in Zoom out Zoom out Preview Images only Preview Images only Preview with Information Preview with Information Quick Insert Quick Insert Custom Insert Custom Insert Add to Collection Add to Collection Go Go 0 Image(s) Displayed, 0 Image(s) Filtered 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Autosave Settings Reset Settings Reset Settings Close Close Information Information File File Name: Name: Path: Path: Size: Size: Date: Date: Image Image Format: Format: Width: Width: Colorspace: Colourspace: Height: Height: DPI: DPI: Layers: Layers: Embedded Profile: Embedded Profile: Profile Name: Profile Name: Filter / Search Filter / Search Filters: Filters: Filter Displayed Images Filter Displayed Images Search Images Search Images Filter Collections Filter Collections ... ... Criteria Criteria << Add << Add Name (Wildcards Allowed) Name (Wildcards Allowed) Date Date Size Size Type Type Tag Tag Contains Contains Doesn't Contain Doesn't Contain Newer than Newer than Older than Older than Smaller than Smaller than Bigger than Bigger than KB KB add add Apply Filters Apply Filters Clear Filters Clear Filters Insert Image Insert Image Image Placement Image Placement Page(s) Page(s) Image Frame(s) Image Frame(s) Position of New Frame(s) Position of New Frame(s) Top Left of Margins Top Left of Margins Top Left of Page Top Left of Page Top Left of Bleed Top Left of Bleed Custom Position Custom Position X: X: Y: Y: Same as Page Margins Same as Page Margins Same as Page Same as Page Same as Bleed Same as Bleed Custom Size Custom Size Insert Image into Insert Image into 0 Page(s) 0 Page(s) 0 Frame(s) 0 Frame(s) Insert Insert Tag Image(s) Tag Image(s) Selected Images: Selected Images: Tag Selected Image(s) Tag Selected Image(s) Add New Tag Add New Tag Set Tags Set Tags Picture Browser Error Picture Browser Error No Image(s) Selected No Image(s) Selected You have to create a category first You have to create a category first No image(s) selected No image(s) selected No page/image frame selected No page/image frame selected Directory does not exist Directory does not exist Select Directory Select Directory Import Image Collection Import Image Collection Scribus ImageCollection (*.sic) Scribus ImageCollection (*.sic) Export Image Collection Export Image Collection You have to select something you want to export You have to select something you want to export No tag entered No tag entered Image still loading Image still loading JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser &Picture Browser PixmapExportPlugin Save as &Image... Save as &Image... Export As Image Export As Image Exports selected pages as bitmap images. Exports selected pages as bitmap images. Save as Image Save as Image Error writing the output file(s). Error writing the output file(s). Export successful Export successful The target location %1 must be an existing directory The target location %1 must be an existing directory The target location %1 must be writable The target location %1 must be writable PluginManager Cannot find plugin plugin manager Cannot find plugin unknown error plugin manager unknown error Cannot find symbol (%1) plugin manager Cannot find symbol (%1) Plugin: loading %1 plugin manager Plugin: loading %1 init failed plugin load error init failed unknown plugin type plugin load error unknown plugin type Plugin: %1 loaded plugin manager Plugin: %1 loaded Plugin: %1 failed to load: %2 plugin manager Plugin: %1 failed to load: %2 Plugin: %1 initialized ok plugin manager Plugin: %1 initialised ok Plugin: %1 failed post initialization plugin manager Plugin: %1 failed post initialisation There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Plugin Manager Plugin Plugin How to run How to run Type Type Load it? Load it? Plugin ID Plugin ID File File You need to restart the application to apply the changes. You need to restart the application to apply the changes. Form Form PolygonProps Polygon Properties Polygon Properties PolygonWidget Corn&ers: Corn&ers: &Rotation: &Rotation: Apply &Factor Apply &Factor % % &Factor: &Factor: Number of corners for polygons Number of corners for polygons Degrees of rotation for polygons Degrees of rotation for polygons Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Sample Polygon Sample Polygon A negative value will make the polygon concave (or star shaped), a positive value will make it convex A negative value will make the polygon concave (or star shaped), a positive value will make it convex PolygonWidgetBase Form Form Corn&ers: Corn&ers: Number of corners for polygons Number of corners for polygons &Rotation: &Rotation: Degrees of rotation for polygons Degrees of rotation for polygons Sample Polygon Sample Polygon Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Apply &Factor Apply &Factor &Factor: &Factor: A negative value will make the polygon concave (or star shaped), a positive value will make it convex A negative value will make the polygon concave (or star shaped), a positive value will make it convex % % C&urvature: C&urvature: PositionSetterWidget Form Form X-pos: X-pos: Y-pos: Y-pos: Width: Width: Height: Height: ... ... Preferences Preferences Preferences General General Document Document Guides Guides Typography Typography Tools Tools Display Display External Tools External Tools Hyphenator Hyphenator Fonts Fonts Color Management Colour Management PDF Export PDF Export Document Item Attributes Document Item Attributes Table of Contents and Indexes Table of Contents and Indexes Keyboard Shortcuts Keyboard Shortcuts Miscellaneous Miscellaneous Plugins Plugins Preflight Verifier Preflight Verifier Scrapbook Scrapbook Printer Printer PreferencesDialog Preferences Preferences Export... Export... Defaults &Apply &Apply &OK &OK &Cancel &Cancel User Interface User Interface Paths Paths Document Setup Document Setup Guides Guides Typography Typography Item Tools Item Tools Operator Tools Operator Tools Hyphenator Hyphenator Fonts Fonts Printer Printer Color Management Colour Management PDF Export PDF Export Preflight Verifier Preflight Verifier Document Item Attributes Document Item Attributes Tables of Contents Tables of Contents Keyboard Shortcuts Keyboard Shortcuts Scrapbook Scrapbook Display Display External Tools External Tools Miscellaneous Miscellaneous Plugins Plugins Image Cache Short Words Short Words Scripter Scripter PrefsDialogBase &Defaults &Defaults Save Preferences Save Preferences Export... Export... &Apply &Apply All preferences can be reset here All preferences can be reset here Apply all changes without closing the dialog Apply all changes without closing the dialog Export current preferences into file Export current preferences into file PrefsManager Postscript Postscript Migrate Old Scribus Settings? Migrate Old Scribus Settings? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? PostScript PostScript Could not open preferences file "%1" for writing: %2 Could not open preferences file "%1" for writing: %2 Scribus has detected existing Scribus 1.3.5 preferences files. Do you want to migrate them to the new Scribus version? Scribus has detected existing Scribus 1.3.5 preferences files. Do you want to migrate them to the new Scribus version? Writing to preferences file "%1" failed: QIODevice status code %2 Writing to preferences file "%1" failed: QIODevice status code %2 Failed to open prefs file "%1": %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Failed to read prefs XML from "%1": %2 at line %3, col %4 Error Writing Preferences Error Writing Preferences Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. Error Loading Preferences Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. No valid renderframe config found. Using defaults! No valid renderframe config found. Using defaults! Prefs_ColorManagement Form Form Color Management Colour Management Document Options Document Options Activate Color Management Activate Color Management Simulate Printer on the Screen Simulate Printer on the Screen Convert all colors to printer space Convert all colours to printer space Mark Colors out of Gamut Mark Colors out of Gamut Use Blackpoint Compensation Use Blackpoint Compensation Document Profiles Document Profiles RGB Images: RGB Images: CMYK Images: CMYK Images: RGB Solid Colors: RGB Solid Colours: CMYK Solid Colors: CMYK Solid Colours: Printer: Printer: Document Rendering Intents Document Rendering Intents Images: Images: Solid Colors: Solid Colours: Monitor Profile Monitor Profile Monitor: Monitor: Monitor profile can only be changed when no document are currently opened. Monitor profile can only be changed when no document are currently opened. Monitor profiles can only be changed when no documents are currently open. Monitor profiles can only be changed when no documents are currently open. Perceptual Perceptual Relative Colorimetric Relative Colourimetric Saturation Saturation Absolute Colorimetric Absolute Colourimetric Prefs_Display Form Form Display Display Page Display Page Display Show Images Show Images Show Text Control Characters Show Text Control Characters Show Rulers Relative to Page Show Rulers Relative to Page Show Text Chains Show Text Chains Show Frames Show Frames Show Layer Indicators Show Layer Indicators Show Unprintable Area in Margin Color Show Unprintable Area in Margin Color Show Bleed Area Show Bleed Area Show Page Shadow Show Page Shadow Scratch Space Scratch Space Left: Left: Right: Right: Top: Top: Bottom: Bottom: Gaps Between Pages Gaps Between Pages Horizontal: Horizontal: Vertical: Vertical: Adjust Display Size Adjust Display Size Scale% Scale% Resets the scale to the default dpi of your display Resets the scale to the default dpi of your display Colors Colours Page Fill: Page Fill: PushButton PushButton Selected Page Border: Selected Page Border: Frames: Frames: Locked Frames: Locked Frames: Selected Frames: Selected Frames: Linked Frames: Linked Frames: Grouped Frames: Grouped Frames: Annotation Frames: Annotation Frames: Text Control Characters: Text Control Characters: Color for paper (onscreen) Colour for paper (onscreen) Mask the area outside the margins in the margin color Mask the area outside the margins in the margin colour Enable or disable the display of linked frames. Enable or disable the display of linked frames. Display non-printing characters such as paragraph markers in text frames Display non-printing characters such as paragraph markers in text frames Turns the display of frames on or off Turns the display of frames on or off Turns the display of layer indicators on or off Turns the display of layer indicators on or off Turns the display of images on or off Turns the display of images on or off Turns the page shadow on or off Turns the page shadow on or off Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Set the default zoom level Set the default zoom level Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size dpi dpi Prefs_DocumentItemAttributes Document Item Attributes Document Item Attributes Name Name Type Type Value Value Parameter Parameter Relationship Relationship Relationship To Relationship To Auto Add To Auto Add To &Add &Add Alt+A Alt+A &Copy &Copy Alt+C Alt+C &Delete &Delete Alt+D Alt+D C&lear C&lear Alt+L Alt+L None relationship None Relates To Relates To Is Parent Of Is Parent Of Is Child Of Is Child Of None auto add None Text Frames Text Frames Image Frames Image Frames None types None Boolean Boolean Integer Integer Real Number Real Number String String Prefs_DocumentSetup Form Form Document Setup Document Setup Page Size Page Size Size: Size: Orientation: Orientation: Units: Units: Width: Width: Height: Height: Apply changes to all pages Apply changes to all pages Apply changes to all master pages Apply changes to all master pages Page Layouts Page Layouts Single Page Single Page pageLayoutButtonGroup pageLayoutButtonGroup Double Page Double Page 3-Fold 3-Fold 4-Fold 4-Fold First Page is: First Page is: Margins Margins Bleeds Bleeds Portrait Portrait Landscape Landscape Prefs_ExternalTools External Tools External Tools External Tools and Applications External Tools and Applications PostScript Interpreter PostScript Interpreter &Name of Executable: &Name of Executable: <qt>Add the path for the Ghostscript interpreter. On Windows, please note it is important to note you need to use the program named gswin32c.exe - NOT gswin32.exe. Otherwise, this maybe cause a hang when starting Scribus.</qt> <qt>Add the path for the Ghostscript interpreter. On Windows, please note it is important to note you need to use the program named gswin32c.exe - NOT gswin32.exe. Otherwise, this maybe cause a hang when starting Scribus.</qt> &Change... &Change... Alt+C Alt+C Antialias text for EPS and PDF onscreen rendering Antialias text for EPS and PDF onscreen rendering Antialias &Text Antialias &Text Alt+T Alt+T Antialias graphics for EPS and PDF onscreen rendering Antialias graphics for EPS and PDF onscreen rendering Antialias &Graphics Antialias &Graphics Alt+G Alt+G Resolution: Resolution: dpi dpi Image Processing Tool Image Processing Tool Name of &Executable: Name of &Executable: <qt>File system location for graphics editor. If you use gimp and your distribution includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp.</qt> <qt>File system location for graphics editor. If you use gimp and your distribution includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp.</qt> Web Browser Web Browser Uniconvertor Uniconvertor Render Frames Render Frames Configurations: Configurations: Up Up Down Down Add Add Delete Delete Change... Change... External Editor: External Editor: <qt>Path to the editor executable.</qt> <qt>Path to the editor executable.</qt> Start with empty frame Start with empty frame Use Embedded Editor Use Embedded Editor Always use the configured DPI setting for calculating the size, even if the image file reports something different. Always use the configured DPI setting for calculating the size, even if the image file reports something different. Force DPI Force DPI Rescan for the external tools if they do not exist in the already specified location Rescan for the external tools if they do not exist in the already specified location &Rescan &Rescan Alt+R Alt+R Locate Ghostscript Locate Ghostscript Locate your image editor Locate your image editor Locate your web browser Locate your web browser Locate the uniconvertor executable Locate the uniconvertor executable Locate your editor Locate your editor Uniconvertor executable not found! Uniconvertor executable not found! Locate a Configuration file Locate a Configuration file Configuration files Configuration files Change Command Change Command Enter new command: (leave empty to reset to default command; use quotes around arguments with spaces) Enter new command: (leave empty to reset to default command; use quotes around arguments with spaces) Command: Command: Prefs_Fonts Form Form Fonts Fonts Delete Delete C&hange... C&hange... A&dd... A&dd... &Remove &Remove Available Fonts Available Fonts Font Substitutions Font Substitutions Additional Paths Additional Paths Font Name Font Name Replacement Replacement Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Choose a Directory Choose a Directory Prefs_Guides Form Form Guides Guides Placement: Placement: Snap Distance: Snap Distance: px px