getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. Note : deprecated, use changeColorCMYK() instead. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColorCMYK("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColorRGB("name", r, g, b) Changes the color "name" to the specified RGB value. The color value is defined via three components r = red, g = green, b = blue. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. Note : deprecated, use defineColorCMYK() instead. May raise ValueError if an invalid color name is specified. defineColorCMYK("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColorRGB("name", r, g, b) Defines a new color "name". The color Value is defined via three components: r = red, g = green, b = blue. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. isSpotColor("name") -> bool Returns True if the color "name" is a spot color. See also setSpotColor() May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. setSpotColor("name", spot) Set the color "name" as a spot color if spot parameter is True. See also isSpotColor() May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. getDocName() -> string Returns the name the document was saved under. If the document was not saved before the name is empty. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setBaseLine(grid, offset) Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. getObjectType(["name"]) -> string Get type of object "name" as a string. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. groupObjects(list) -> string Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. Returns the group name for further referencing. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the internal scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. Internal scaling factors are different from the values shown on properties palette. Note : deprecated, use setImageScale() instead. May raise WrongFrameTypeError if the target frame is not an image frame setImageOffset(x, y [, "name"]) Sets the position of the picture in the image frame "name". If "name" is not given the currently selected item is used. The specified offset values are equal to the values shown on properties palette when point unit is used. May raise WrongFrameTypeError if the target frame is not an image frame setImageScale(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. Scaling factors are equal to the values shown on properties palette. May raise WrongFrameTypeError if the target frame is not an image frame setImageBrightness(n [, "name"]) Set image brightness effect of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. Brightness factor is equal to the value shown on properties palette. May raise WrongFrameTypeError if the target frame is not an image frame setImageGrayscale(["name"]) Set image grayscale effect of the picture in the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. fileQuit() Quit Scribus. getGuiLanguage() -> string Returns a string with the -lang value. moveSelectionToFront() Moves current selection to front. moveSelectionToFront() Moves current selection to back. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If object name is given, style is applied to the current text selection in object "name". If no object name is given, style is applied on selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with document page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageNSize(nr) -> tuple Returns a tuple with a particular page's size measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageMargins() Returns the document page margins as a (top, left, right, bottom) tuple in the document's current units. See UNIT_<type> constants and getPageSize(). getPageNMargins(nr) -> tuple Returns a tuple with a particular page's margins measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... importPage("fromDoc", (pageList), [create, imortwhere, importwherePage]) Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function. fromDoc: string; the filename of the document to import pages from pageList: tuple with page numbers of pages to import create: number; 0 to replace existing pages, 1 (default) to insert new pages importWhere: number; the page number (of the current document) at which import the pages importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientStop("color", shade, opacity, ramppoint, ["name"]) Set or add a gradient stop to the gradient fill of the object "name" at position ramppoint. Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill() must have been called previously for the gradient fill to be visible. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. createParagraphStyle(...) Creates a paragraph style. This function takes the following keyword parameters: "name" [required] -> specifies the name of the paragraphstyle to create linespacingmode [optional] -> specifies the linespacing mode; possible modes are: fixed linespacing: 0 automatic linespacing: 1 baseline grid linespacing: 2 linespacing [optional] -> specifies the linespacing if using fixed linespacing alignment [optional] -> specifies the alignment of the paragraph -> left: 0 -> center: 1 -> right: 2 -> justify: 3 -> extend: 4 leftmargin [optional], rightmargin [optional] -> specify the margin gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs firstindent [optional] -> the indent of the first line hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no) dropcaplines [optional] -> height (in lines) of the caps if used dropcapoffset [optional] -> offset of the caps if used "charstyle" [optional] -> char style to use createCharStyle(...) Creates a character style. This function takes the following keyword parameters: "name" [required] -> name of the char style to create "font" [optional] -> name of the font to use fontsize [optional] -> font size to set (double) "features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!): -> inherit -> bold -> italic -> underline -> underlinewords -> strike -> superscript -> subscript -> outline -> shadowed -> allcaps -> smallcaps "fillcolor" [optional], "fillshade" [optional] -> specify fill options "strokecolor" [optional], "strokeshade" [optional] -> specify stroke options baselineoffset [optional] -> offset of the baseline shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used outlinewidth [optional] -> width of the outline if used underlineoffset [optional], underlinewidth [optional] -> underline options if used strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used scaleh [optional], scalev [optional] -> scale of the chars tracking [optional] -> tracking of the text "language" [optional] -> language code getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getTextDistances(["name"]) -> tuple Returns the text distances of the text frame "name" expressed in points. The distances are returned as a tuple like (left, right, top, bottom). If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacingMode(mode, ["name"]) Sets the line spacing mode of the text frame "name" to "mode". If "name" is not given the currently selected item is used. Mode values are the same as in createParagraphStyle. May throw ValueError if the mode is out of bounds. setTextDistances(left, right, top, bottom, ["name"]) Sets the text distances of the text frame "name" to the values "left" "right", "top" and "bottom". If "name" is not given the currently selected item is used. May throw ValueError if any of the distances are out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextScalingV(scale, ["name"]) Sets the vertical character scaling of the object "name" to "scale" in percent. If "name" is not given the currently selected item is used. setTextScalingH(scale, ["name"]) Sets the horizontal character scaling of the object "name" to "scale" in percent. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame hyphenateText(["name"]) -> bool Does hyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> bool Does dehyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. scrollDocument(x,y) Scroll the document in main GUI window by x and y. placeVectorFile("filename", x, y) Places the Vectorgrapics "filename" onto the current page, x and y specify the coordinate of the topleft corner of the graphic placed on the page If loading was successful, the selection contains the imported grapic placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG AIPlug Importing: %1 Analyzing File: Group%1 Generating Items About About Scribus %1 %1 %2 %3 %3-%2-%1 %4 %5 Using Ghostscript version %1 No Ghostscript version available Build ID: &About Development Team: Contributions from: Mac OS&#174; X Aqua Port: Windows&#174; Port: Official Documentation: Other Documentation: Tango Project Icons: A&uthors Official Translations and Translators: Previous Translation Contributors: &Translations Homepage Online Reference Wiki Bugs and Feature Requests Mailing List &Online &Updates &Close Check for updates to Scribus. No data from your machine will be transferred off it. OS/2&#174;/eComStation&#8482; Port: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Check for Updates Abort Update Check Developer Blog &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Filename: Version: Enabled: Release Date: Description: Author(s): Copyright: License: Scribus: About Plug-ins ActionManager &New &Open... &Close &Save Save &As... Re&vert to Saved Collect for O&utput... Get Text... Append &Text... Get Image... Save &Text... Save as &EPS... Save as P&DF... Document &Setup... P&references... &Print... Print Previe&w &Quit &Undo &Redo &Item Action Mode Cu&t &Copy &Paste Paste (&Absolute) C&lear Select &All &Deselect All &Search/Replace... Edit Image... C&olors... Patterns... Gradients... S&tyles... &Master Pages... &JavaScripts... %1 pt &Other... &Left &Center &Right &Block &Forced &Normal &Underline Underline &Words &Strike Through &All Caps Small &Caps Su&perscript Su&bscript &Outline type effect S&hadow &Image Effects &Tabulators... D&uplicate &Multiple Duplicate &Delete &Group &Ungroup Is &Locked Si&ze is Locked &Printing Enabled &Flip Horizontally &Flip Vertically Lower to &Bottom Raise to &Top &Lower &Raise Send to S&crapbook Send to Patterns &Attributes... More Info... I&mage Visible &Update Image Adjust Frame to Image Embed Image Extended Image Properties &Low Resolution &Normal Resolution &Full Resolution Is PDF &Bookmark Is PDF A&nnotation Annotation P&roperties Field P&roperties &Edit Shape... &Attach Text to Path &Detach Text from Path &Combine Polygons Split &Polygons &Bezier Curve &Image Frame &Outlines Convert to oulines &Polygon &Text Frame &Frame... &Glyph... Sample Text &Insert... Im&port... &Delete... &Copy... &Move... &Apply Master Page... Convert to Master Page... Manage &Guides... Manage Page Properties... &50% &75% &100% &200% Preview Mode Show &Margins Show &Frames Show Layer Indicators Show &Images Show &Grid Show G&uides Show Text Frame Columns Show &Baseline Grid Show &Text Chain Show Control Characters Show Rulers Sn&ap to Grid Sna&p to Guides &Properties &Outline Document Outline Palette &Scrapbook &Layers &Arrange Pages &Bookmarks &Measurements Action &History Preflight &Verifier &Align and Distribute Symbols &Tools P&DF Tools Select Item Rotate Item Zoom in or out Zoom in Zoom out Edit Contents of Frame Edit Text... Link Text Frames Unlink Text Frames &Eye Dropper Copy Item Properties Insert PDF Push Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Insert 3D Annotation &Hyphenate Text Dehyphenate Text &Generate Table Of Contents &Cascade &Tile &About Scribus About &Qt Toolti&ps Scribus &Manual... Toggle Palettes Toggle Guides Non Breaking Dash Non Breaking &Space Page &Number New Line Frame Break Column Break Copyright Registered Trademark Trademark Solidus Bullet Middle Dot Em Dash En Dash Figure Dash Quotation Dash En Space Em Space Thin Space Thick Space Mid Space Hair Space ff fi fl ffi ffl ft st Sticky Tools Document &Setup (old)... P&references (old)... &Fit to Height Fit to Width Show Bleeds Soft &Hyphen &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Straight Double Unicode 0x0022 Single Left Unicode 0x2018 Single Right Unicode 0x2019 Double Left Unicode 0x201C Double Right Unicode 0x201D Single Reversed Unicode 0x201B Double Reversed Unicode 0x201F Single Left Guillemet Unicode 0x2039 Single Right Guillemet Unicode 0x203A Double Left Guillemet Unicode 0x00AB Double Right Guillemet Unicode 0x00BB Low Single Comma Unicode 0x201A Low Double Comma Unicode 0x201E CJK Single Left Unicode 0x300C CJK Single Right Unicode 0x300D CJK Double Left Unicode 0x300E CJK Double Right Unicode 0x300F &400% Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Insert &Render Frame Check for Updates Number of Pages Adjust Image to Frame File &File Edit &Edit Style &Style Item &Item Insert I&nsert Page &Page View &View Extras E&xtras Windows &Windows Help &Help Plugin Menu Items Others Unicode Characters Move/Resize Value Indicator New &from Template... AdjustCmsDialog CMS Settings AlignDistribute Align &Selected Guide: &Relative To: &Align Sides By: ... Distribute &Distance: Reverse Distribution Swap AlignDistributePalette Align and Distribute &Relative to: First Selected Last Selected Page Margins Guide Selection &Align Sides By: Moving (Preserve Size) Resizing (Preserve Opposite Side) <qt>When aligning one side of an item:<ul><li>Always move the other side too (preserve existing width and height), or </li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> Align bottoms Align right sides Center on vertical axis Align left sides Center on horizontal axis Align tops &Selected Guide: Distribute right sides equidistantly Distribute bottoms equidistantly Distribute centers equidistantly horizontally Distribute left sides equidistantly Distribute centers equidistantly vertically Distribute tops equidistantly &Distance: Distribute the items with the distance specified When distributing by a set distance, reverse the direction of the distribution of items None Selected Swap items to the left Swap items to the right Y: %1%2 X: %1%2 Align right sides of items to left side of anchor Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal Align Distribute <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left Align Text Right Align Text Center Align Text Justified Align Text Forced Justified Annot Field Properties Type: Button Text Field Check Box Combo Box List Box Properties Name: Tooltip: Text Font for use with PDF 1.3: Border Color: Width: Thin Normal Wide Style: Solid Dashed Underline Beveled Inset Other Read Only Required Do Not Export Value Visibility: Visible Hidden No Print No View Appearance Text for Button Down Text for Roll Over Icons Use Icons Remove Pressed Roll Over Icon Placement... Highlight None highlight Invert Outlined Push Multi-Line Password Limit of Characters Do Not Scroll Do Not Spell Check Check Style: Check Cross Diamond Circle Star Square Default is Checked Editable Options None action JavaScript Go To Submit Form Reset Form Import Data Event: Mouse Up Mouse Down Mouse Enter Mouse Exit On Focus On Blur Script: Edit... Submit to URL: Import Data from: Destination To File: Change... Page: X-Pos: pt Y-Pos: Action Field is formatted as: Plain Number Percentage Date Time Custom Number Format Decimals: Use Currency Symbol Prepend Currency Symbol Formatting Percent Format Date Format Time Format Custom Scripts Format: Keystroke: Format Value is not validated Value must be greater than or equal to: and less or equal to: Custom validate script: Validate Value is not calculated Value is the sum product average minimum maximum of the following fields: Pick... Custom calculation script: Calculate OK Cancel Flag is ignored for PDF 1.3 Enter a comma separated list of fields here You need at least the Icon for Normal to use Icons for Buttons Open Example: Selection Change None PDF Files (*.pdf);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Export absolute Filename Submit format: FDF HTML XFDF PDF Annota Annotation Properties Text Link External Link External Web-Link &Type: Destination C&hange... &Page: pt &X-Pos &Y-Pos: Open %1;;All Files (*) Export absolute Filename ApplyMasterPageDialog Apply Master Page &Master Page: Alt+P Alt+E Alt+D Alt+A Alt+W Apply the selected master page to even, odd or all pages within the following range to Alt+O Alt+C Possible Hyphenation Apply to Current &Page &Even Pages O&dd Pages &All Pages &Within Range AspellPlugin Spell-checking support 0.1 Spell Checker Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error AspellPluginBase Spell Check Replacement: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. &Add Word &Change Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: Ignore the current text not found in the active dictionary &Ignore Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close AspellPluginImpl Loaded default AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in Aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating Aspell speller. Spell Checker No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Flow Chart Jigsaw Specials Default Shapes Barcode &Barcode... Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator 12 or 13 digits 8 digits 11 or 12 digits 7 or 8 digits 5 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits and capital letters Variable number of hexadecimal characters Barcode Error opening file: %1 Barcode incomplete 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type BarcodeGeneratorBase &Type: Co&de: Select one of the available barcode type here The numeric representation of the code itself. See the help message below Reset the barcode samples Alt+I If checked, there will be numbers in the barcode too Alt+G Draw arrows to be sure of space next the code Alt+N Generate and include a checksum in barcode Alt+U Include the checksum digit in the barcode text Colors &Background Alt+B Background color - under the code lines &Lines Alt+L Color of the lines in barcode &Text Alt+T Color of the text and numbers Hints and help is shown here Insert Barcode Format Incl&ude Checksum Digit I&nclude Checksum &Guard Whitespace &Include Text in Barcode Biblio Main Copied Items Choose a Scrapbook Directory Choose a scrapbook file to import Choose a Directory Rename Delete Copy To: Move To: &Name: New Entry Object Scrapbook Create a new scrapbook page Load an existing scrapbook Save the selected scrapbook Import a scrapbook file from Scribus <=1.3.2 Close the selected scrapbook New Name Scrapbook (*.scs *.SCS) Paste to Page Save as... Close Delete Contents Do you really want to delete all entries? BookPalette Bookmarks ButtonIcon Icon Placement Layout: Caption only Icon only Caption below Icon Caption above Icon Caption right to Icon Caption left to Icon Caption overlays Icon Scale: Always When Icon is too small When Icon is too big Never Scale How: Proportional Non Proportional Icon OK Cancel Reset CMSPrefs Monitor profiles can only be changed when no documents are currently opened. Perceptual Relative Colorimetric Saturation Absolute Colorimetric CMSPrefsBase Form &Activate Color Management &RGB Images: Default color profile for imported RGB images &CMYK Images: Default color profile for imported CMYK images &RGB Solid Colors: Default color profile for solid RGB colors on the page &CMYK Solid Colors: Default color profile for solid CMYK colors on the page Document Options Simulate printer on Screen Monitor Profile &Monitor: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). P&rinter: Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Document Rendering Intents Images: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Mark Colors out of &Gamut Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Use &Blackpoint Compensation CMYKChoose Edit Color &Name: Color &Model CMYK RGB Web Safe RGB Is Spot Color New Old C: % M: Y: K: Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. Dynamic Color Bars Static Color Bars R: G: B: You cannot create a color named "%1". It is a reserved name for transparent color The name of the color already exists, please choose another one. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CWDialog Merging colors Error: Color %1 exists already! Color %1 appended. Now opening the color manager. Color Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Color Wheel Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors CMYK RGB HSV Colors of your chosen color scheme. Color Scheme Method Angle: Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Merge created colors into the document colors &Merge Alt+M Replace created colors in the document colors &Replace Alt+R Leave colors untouched &Cancel Alt+C Preview: Sample color scheme. Simulate common vision defects here. Select type of the defect. Vision Defect Type: C: % M: Y: K: RGB: HSV: R: G: B: CMYK: H: S: V: Document Canvas X: %1 Y: %2 X: %1 Y: %1 Length: %1 Angle: %2 Width: %1 Height: %2 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. Color Not Found The name you have selected already exists. Please enter a different name for this new color. CanvasMode_Normal All Supported Formats Open CgmPlug Importing: %1 Analyzing File: Group%1 Generating Items CharSelect Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Error Error reading file %1 - file is corrupted propably. Cannot write file %1 Character Palette Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette CharSelectEnhanced Full Character Set Basic Latin Latin-1 Supplement Latin Extended-A Latin Extended-B General Punctuation Super- and Subscripts Currency Symbols Letterlike Symbols Number Forms Arrows Mathematical Operators Box Drawing Block Elements Geometric Shapes Miscellaneous Symbols Dingbats Small Form Variants Ligatures Specials Greek Greek Extended Cyrillic Cyrillic Supplement Arabic Arabic Extended A Arabic Extended B Hebrew Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text &Insert Delete the current selection(s). C&lear Type in a four digit Unicode value directly here CharStyleComboBox No Style CharTableView Delete CheckDocument Document No Problems found OK Transparency used Blendmode used Print/Visible Mismatch Layer "%1" Page Free Objects &Ignore Errors Preflight Verifier Items Problems Current Profile: Check again Glyphs missing Text overflow Object is not on a Page Missing Image Object has transparency Object is a PDF Annotation or Field Object is a placed PDF Image is GIF Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame Layers Issue(s): %1 Master Pages Layer Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI CollectForOutput Choose a Directory Cannot create directory: %1 Collecting... Cannot collect all files for output for file: %1 Cannot collect the file: %1 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... Cannot collect all files for output for file: %1 Cannot collect the file: %1 ColorManager Colors &Import &New &Edit D&uplicate &Delete &Remove Unused Color Sets Current Color Set: &Save Color Set Choose a color set to load Save the current color set Remove unused colors from current document's color set Import colors to the current set from an existing document Create a new color within the current set Edit the currently selected color Make a copy of the currently selected color Delete the currently selected color Make the current colorset the default color set &Name: Choose a Name Copy of %1 New Color Information The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks. All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors ColorWheel Monochromatic Analogous Complementary Split Complementary Triadic Tetradic (Double Complementary) Base Color Monochromatic Light Monochromatic Dark 1st. Analogous 2nd. Analogous 1st. Split 2nd. Split 3rd. Split 4th. Split 1st. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) ColorWheelPlugin &Color Wheel... Color setting helper Color selector with color theory included. CommonStrings &Apply &Cancel None color name &OK &Save Warning Yes No &Yes &No PDF 3D Annotation Symbol Custom CommonStrings, custom page size Single Page Double Sided 3-Fold 4-Fold Monday Tuesday Wednesday Thursday Friday Saturday Sunday January February March April May June July August September October November December Left Page Left page location Middle Middle page location Middle Left Middle Left page location Middle Right Middle Right page location Right Page Right page location Normal Default single master page Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Protanopia (Red) Color Blindness - Red Color Blind Deuteranopia (Green) Color Blindness - Greed Color Blind Tritanopia (Blue) Color Blindness - Blue Color Blind Full Color Blindness Color Blindness - Full Color Blindness Custom: Custom Tab Fill Option None Solid Line Dashed Line Dotted Line Dash Dot Line Dash Dot Dot Line None Optical Margin Setting Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace CMYK Colorspace Grayscale Colorspace Duotone Colorspace Unknown Colorspace (Unknown) PostScript Text Frame Image Frame Line Polygon Polyline Text on a Path Multiple Multiple frame types PDF Push Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation PostScript Level 1 PostScript Level 2 PostScript Level 3 Windows GDI Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings Paste File... Delete Page Paste Image from Clipboard CopyPageToMasterPageBase Convert Page to Master Page Name: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Cpalette Custom Create Mesh CreateRange Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Range of Pages De&lete Alt+L Move &Down Alt+D Move &Up Alt+U Add a Range of Pages Consecutive Pages Even Pages From: To: &Add To Range Alt+A Odd Pages Comma Separated List Advanced Reordering Page Order Sample Page Order: Page Group Size: &OK Alt+O &Cancel Alt+C CsvDialog CSV Importer Options Field delimiter: (TAB) Value delimiter: None delimiter First row is a header OK Cancel CupsOptions Printer Options Page Set All Pages Even Pages only Odd Pages only Mirror Orientation Portrait Landscape N-Up Printing Page per Sheet Pages per Sheet Option Value This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Cannot write the file: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog &Compress File &Include Fonts Encoding: Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CvgPlug Importing: %1 Analyzing File: Group%1 Generating Items DashEditor Value: Offset: DeferredTask Cancelled by user DelColor Delete Color Delete Color: Replace With: DelPages Delete Pages Delete From: to: DialogsAPI Alert - Scribus DocIm Importing failed Importing Word document failed %1 DocInfos Document Information &Title: &Author: &Subject: &Keywords: Descri&ption: P&ublisher: &Contributors: Dat&e: T&ype: F&ormat: Identi&fier: &Source: &Language: &Relation: Co&verage: Ri&ghts: Documen&t Further &Information The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files A person or organisation responsible for making the document available A person or organisation responsible for making contributions to the content of the document A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here An unambiguous reference to the document within a given context such as ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH A reference to a related document, possibly using a formal identifier such as a ISBN or URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Information about rights held in and over the document, eg. copyright, patent or trademark DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Delete the currently selected section. <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. 1, 2, 3, ... i, ii, iii, ... I, II, III, ... a, b, c, ... A, B, C, ... Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections &Add Alt+A &Delete Alt+D Name Shown From To Style Start DocumentItemAttributes None relationship Relates To Is Parent Of Is Child Of None auto add Text Frames Image Frames None types Boolean Integer Real Number String Document Item Attributes &Add Alt+A &Copy Alt+C &Delete Alt+D C&lear Alt+L Name Type Value Parameter Relationship Relationship To Auto Add To DrwPlug Group%1 Importing: %1 Analyzing File: Generating Items EPSPlug Analyzing PostScript: Group%1 Importing File: %1 failed! Fatal Error Generating Items Converting of %1 images failed! Error Importing: %1 EditToolBar Edit Editor Editor &New &Open... Save &As... &Save and Exit &Exit without Saving &Undo &Redo Cu&t &Copy &Paste C&lear &Get Field Names &File &Edit JavaScripts (*.js);;All Files (*) Ctrl+N Ctrl+Z Ctrl+X Ctrl+C Ctrl-V EffectsDialog Image Effects Options: Color: Shade: Brightness: Contrast: Radius: Value: Posterize: Color 1: Color 2: Color 3: Color 4: Available Effects Blur Brightness Colorize Duotone Tritone Quadtone Contrast Grayscale Curves Invert Posterize Sharpen >> << Effects in use OK Cancel ExceptHookDialog Script error An exception occured while running the script. &Close Exception &Details >> ExportBitmap File exists. Overwrite? exists already. Overwrite? Save as Image Insufficient memory for this image size. Error writing the output file(s). ExportForm Choose a Export Directory Export as Image(s) &Export to Directory: C&hange... Options Image &Type: &Quality: &Resolution: &Size: % dpi Range &Current page &All pages &Range Image size in Pixels Export a range of pages Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Export all pages Export only the current page Resolution of the Images Use 72 dpi for Images intended for the Screen Size of the images. 100% for no changes, 200% for two times larger etc. Available export formats The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Change the output directory TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic ExtImageProps Extended Image Properties Normal Darken Lighten Hue Saturation Color Luminosity Multiply Screen Dissolve Overlay Hard Light Soft Light Difference Exclusion Color Dodge Color Burn Blend Mode: Opacity: % Name Layers Don't use any Path Paths Live Preview FDialogPreview Size: Resolution: DPI Unknown Colorspace: Title: No Title Author: Scribus Document File Format: FileLoader Some fonts used by this document have been substituted: was replaced by: FileToolBar File FontComboH Family: Style: Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Font Name Use Font Family Style Variant Type Format Embed in PostScript Subset Access Used in Doc Path to Font File Unknown font type Unknown font format User font preview System font preview Click to change the value FontPrefsTab Available Fonts Font Substitutions Additional Paths &Available Fonts Font Name Replacement &Delete Font &Substitutions C&hange... A&dd... &Remove Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Additional &Paths Choose a Directory FontPreview Woven silk pyjamas exchanged for blue quartz font preview Leave preview font preview Size of the selected font Fonts Preview &Quick Search: &Font Size: Text Sample text to display Se&t Alt+T Reset the text &Close Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default Show Extended Font Information Set the preview text FontPreviewPlugin &Font Preview... Font Preview dialog Sorting, searching and browsing available fonts. FontReplaceDialog Font Substitution This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Original Font Substitution Font Make these substitutions permanent Cancels these font substitutions and stops loading the document. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. If you select OK, then save, these substitutions are made permanent in the document. FontSelect Select Alternate Font Font GradientEditor Add, change or remove color stops here Position: % GradientEditorBase Frame Position: % Color: Opacity: Shade: GradientPreview Add Stop Remove Stop GradientVectorBase Gradient Vector Start: / End: Skew: Focal: Scale: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape GuideManager &Single Horizontals &Add Alt+A D&elete Alt+E Verticals A&dd Alt+D De&lete Alt+L &Lock Guides Appl&y to All Pages Alt+Y &Column/Row &Number: U&se Gap: Alt+S &Page Alt+P M&argins S&election Nu&mber: Use &Gap: Alt+G &Misc Delete all guides from the current page Delete Guides from Current &Page Delete all guides from the current document Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages Refer to HelpBrowser &Delete &Print... &File &Find... Find &Next Find &Previous &Edit &Add Bookmark D&elete All &Bookmarks Scribus Online Help Navigation Loading Failed Find Search Term: New Bookmark New Bookmark's Title: Scribus Help &Exit Find &Next... Find &Previous... &Add &Quit <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowserNavigation Form &Contents Se&arch Searching is case insensitive &Search 1 Book&marks &New &Delete D&elete All HyAsk Possible Hyphenation Accept Skip Cancel Add to the Exception List Add to the Ignore List HySettings Ignore List Add a new Entry Edit Entry Exception List ImageInfoDialog Image Info General Info Date / Time: Has Embedded Profile: Profile Name: Has Embedded Paths: Has Layers: EXIF Info Artist: Comment: User Comment: Camera Model: Camera Manufacturer: Description: Copyright: Scanner Model: Scanner Manufacturer: Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats ImportPSPlugin Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats Imposition Portrait Landscape ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Front side Back side &Booklet Pages per sheet 4 8 16 Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Back page from Destination page Size Orientation Width Height Preview Refresh preview &OK Alt+G &Cancel Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InsPage Insert Page &Insert Page(s) before Page after Page at End Master Pages &Master Page: Page Size &Size: Orie&ntation: Portrait Landscape &Width: &Height: Move Objects with their Page InsertAFrame Open Insert A Frame T&ype &Text Frame &Image Frame &Location Page Placement Current Page All Pages ... Position of Frame Top Left of Margins Top Left of Page Top Left of Bleed X: Y: &Size Same as the Page Margins Same as the Page Same as the Bleed Same as the Imported Image Height: Width: &Options Source Image: There are no options for this type of frame Columns: Gap: Source Document: Range of Pages Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertTable Insert Table Number of rows: Number of columns: JavaDocs Edit JavaScripts &Edit... &Add... &Delete &Close Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. &New Script: New Script Do you really want to delete this script? LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options Resolution: Automatic DPI Program: Use Preamble Status: Error Finished Running No item selected! Editor Information An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Insert Symbol LayerPalette Opacity: % Delete Layer Do you want to delete all objects on this layer too? Layers Blend Mode: Normal Darken Lighten Multiply Screen Overlay Hard Light Soft Light Difference Exclusion Color Dodge Color Burn Hue Saturation Color Luminosity Name Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer Duplicate the Current Layer Raise Layer Lower Layer Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Name of the Layer - Double click on the name of a layer to edit the name LegacyMode Open All Supported Formats LensDialogBase Optical Lens + - Lens Parameters Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools Lens Effects Apply fancy lens effects LoadSavePlugin All Files (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found LoremManager Select Lorem Ipsum Author: Get More: XML File: Lorem Ipsum Paragraphs: Alt+O Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MarginDialog Manage Page Properties Page Size &Size: Orie&ntation: Portrait Landscape &Width: &Height: Move Objects with their Page Type: Margin Guides Other Settings Master Page: Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget Preset Layouts: &Bottom: &Top: &Right: &Left: Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing pages in the document Apply the margin changes to all existing master pages in the document Printer Margins... Import the margins for the selected page size from the available printers. Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page &Inside: O&utside: Margin Guides Top: Bottom: Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Bleeds Inside: Outside: Left: Right: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages Duplicate the selected master page Delete the selected master page Add a new master page Import master pages from another document Copy #%1 of &Name: New Master Page Name: New MasterPage New Master Page %1 Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Copy #%1 of %2 This master page is used at least once in the document. Do you really want to delete master page "%1"? Measurements ° MeasurementsBase Distances X1: 10000.0000 Y1: X2: Y2: Length: DX: DY: Angle: Unit: MergeDoc Import Master Page Import Page(s) &From Document: &Import Page(s): &Import Master Page Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. from 0 Create Page(s) Before Page After Page At End &Import Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) from %1 &Select... MeshDistortionDialog + - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset MeshDistortionPlugin Mesh Distortion... Path Tools Mesh Distortion of Polygons MissingFont Missing Font The Font %1 is not installed. Use instead ModeToolBar Tools Properties... MovePages Move Pages Copy Page Move Page(s) To: Before Page After Page At End Move Page(s): Number of Copies: MultiProgressDialog Progress Overall Progress: &Cancel %v of %m MultipleDuplicate &Horizontal Shift: &Vertical Shift: &Horizontal Gap: &Vertical Gap: Multiple Duplicate &By Number of Copies &Number of Copies: &Shift Created Items By Alt+S Create &Gap Between Items Of Alt+G Rotation: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Number of Columns: &OK &Cancel MyPlugin My &Plugin MyPluginImpl Scribus - My Plugin The plugin worked! NewDoc New Document &New Document Open &Existing Document Open Recent &Document Do not show this dialog again Document page size, either a standard size or a custom size Orientation of the document's pages Width of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Initial number of pages of the document Default unit of measurement for document editing Create text frames automatically when new pages are added Number of columns to create in automatically created text frames Distance between automatically created columns &Size: Orie&ntation: Portrait Landscape &Width: &Height: Options N&umber of Pages: &Default Unit: New from Template Open Existing Document Open Recent Document Margin Guides &Automatic Text Frames &Gap: Colu&mns: Open First Page is: Show Document Settings After Creation Document Layout New &from Template NewFromTemplatePlugin New &from Template... Load documents with predefined layout Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). NewMarginWidget Form Preset Layouts: Left: Right: Top: Bottom: Link Printer Margins... Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: &Left: O&utside: &Right: NodePalette Nodes % &Absolute Coordinates &X-Pos: &Y-Pos: Edit &Contour Line &Reset Contour Line &End Editing Move Nodes Move Control Points Add Nodes Delete Nodes Move Control Points Independently Move Control Points Symmetrical Reset Control Points Reset this Control Point Open a Polygon or Cuts a Bezier Curve Close this Bezier Curve Mirror the Path Horizontally Mirror the Path Vertically Shear the Path Horizontally to the Right Shear the Path Horizontally to the Left Shear the Path Vertically Up Shear the Path Vertically Down Rotate the Path Counter-Clockwise Rotate the Path Clockwise Shrink the Size of the Path by shown % Enlarge the Size of the Path by shown % Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value Angle of Rotation % to Enlarge or Shrink By Value to Enlarge or Shrink By Activate Contour Line Editing Mode Reset the Contour Line to the Original Shape of the Frame When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas to Page Set Shape to Image Clip Set the Shape to the Clipping Path of the Image OODPlug This document does not seem to be an OpenOffice Draw file. Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... Imports OpenOffice.org Draw Files Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenOffice.org 1.x Draw Import/export format name This file contains some unsupported features The file could not be imported OSGEditor 3D Properties Load Model ... Clear Model Views Name: Options Solid Solid Wireframe Transparent Transparent Wireframe Wireframe Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None Headlamp White Day Night Hard Primary Blue Red Cube CAD Artwork Field of Vision Angle: Add View... Remove View OSGEditorDialog Default Add a new View Name: New View All Supported Formats (%1);;All Files (*) Import 3-D Model OdtDialog OpenDocument Importer Options Overwrite Paragraph Styles Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Use document name as a prefix for paragraph styles Prepend the document name to the paragraph style name in Scribus. Do not ask again Make these settings the default and do not prompt again when importing an OASIS OpenDocument. OK Cancel OldScribusFormat Scribus Document Scribus 1.2.x Document OneClick Basepoint Size Width: Length: Height: Angle: Remember Values OpenPalette empty palette OpenPaletteModel Elements Visible OutlinePalette Element Name "%1" isn't unique.<br/>Please choose another. Group Page Free Objects Outline Enter a keyword or regular expression to filter the outline. Filter: Ctrl+F Filter the Outline using a keyword OutlineValues % Linewidth PDFExportDialog Save as PDF O&utput to File: Cha&nge... Output one file for eac&h page Open PDF after Export &Save This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. %1 does not exists and will be created, continue? Cannot create directory: %1 PDF Files (*.pdf);;All Files (*) Save As PDFLibCore Saving PDF Exporting Master Page: Exporting Page: Exporting Items on Current Page: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: Date: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occurred, please check available disk space PDFToolBar PDF Tools PPreview Print Preview Display Settings Enable &Antialiasing Display Trans&parency &Display CMYK &C &M &Y &K Separation Name Cyan Magenta Yellow Black Mirror Page(s) Horizontal Mirror Page(s) Vertical Print in Grayscale &Under Color Removal Convert Spot Colors Scaling: Fit to Width Fit to Height Fit to Page Close Print... Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Gives a print preview using simulations of generic CMYK inks, instead of RGB colors A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enable/disable the C (Cyan) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the K (Black) ink plate All File Apply Color Profiles Preview Settings Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins Display Ink Coverage Threshold: % None PSLib Processing Master Page: Exporting Page: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PageItem Image Text Line Polygon Polyline PathText Symbol Copy of PageItemAttributes None relationship Relates To Is Parent Of Is Child Of &Add Alt+A &Copy Alt+C &Delete Alt+D C&lear Alt+L &OK &Cancel Name Type Value Parameter Relationship Relationship To Attributes PageItem_ImageFrame Image Embedded Image File: Original PPI: Actual PPI: Size: Colorspace: Unknown Page: Pages: Embedded Image missing missing No Image Loaded PageItem_LatexFrame Error Running the external application failed! This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? Could not create a temporary file to run the application! The application "%1" failed to start! Please check the path: Running the application "%1" failed! Running The application "%1" crashed! Application DPI State Finished Render The config file didn't specify a executable path! Render Frame No configuration defined to run the application! No application defined Rendering... Render Error PageItem_OSGFrame OSG Default 3D Model File: PageItem_PathText Paragraphs: Lines: Words: Chars: PageItem_TextFrame Linked Text Text Frame Paragraphs: Lines: Words: Chars: PageLayouts First Page is: Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Arrange Pages Available Master Pages: Document Pages: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. This master page is used at least once in the document. Do you really want to delete this master page? PageSelector Go to the first page Go to the previous page Go to the next page Go to the last page Select the current page of %1 number of pages in document ParaStyleComboBox No Style PathAlongPathPlugin Path Along Path... Path Tools Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Starting Point End Point a straight Line Points moving Preview on Canvas Connect First Line with Second Line by using: PathConnectPlugin Connect Paths Path Tools Connect 2 Polylines. PathCutPlugin Cut Polygon Path Tools Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 180° 270° PathFinderBase Boolean Path Operations + = Operation ... Swap Shapes First source shape. Second source shape. The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Stroke: Fill: Keep a copy of the original item after applying the operation Keep Subtracts the second shape from the first shape Exchange the Source Shapes The resulting shape uses the color of the first source shape First Shape The resulting shape uses the color of the second source shape Second Shape The resulting shape uses the colors listed below Stroke Color Fill Color Result Takes Color from: PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Path Operations Apply fancy boolean operations to paths. Qt Version too old This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Path Tools Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Loading Patterns All Files (*) Open Patterns Load File Load Set Remove Remove All OK Cancel &Name: Rename Entry All Supported Formats Rename PatternPropsDialog Pattern Properties pt % Offsets X: Y: Scaling X-Scale: Y-Scale: Rotation Skewing Spacing Value: X-Skew: Y-Skew: Angle: Flip: Close PctPlug Importing: %1 Analyzing File: Group%1 Generating Items PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Size: Resolution: DPI Unknown Colorspace: Result Search Results for: &Preview Alt+P &Select Alt+S Cancel PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Start Search Select a base directory for search Scribus - Image Search The search failed: %1 Search Images Search for: Start at: Change... Searching Case insensitive search Search recursively Base directory for search does not exist. Please choose another one. PicStatus Close Scribus - Image Search No images named "%1" were found. Not on a Page JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD Unknown n/a Information Path: Search... Name: Image DPI: Format: Colorspace: Size Pixels: Scale: Printed: Layout On Page: Select Image Tools Set format specific properties of certain image types, like clipping paths Image Visible Image Effects... Edit Image... Extended Image Properties... Sort by Name Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections go to page More Always on Top Sort by Name Sort by Date Sort by Size Sort by Type Change sortorder Zoom in Zoom out Preview Images only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close Information File Name: Path: Size: Date: Image Format: Width: Colorspace: Height: DPI: Layers: Embedded Profile: Profile Name: Filter / Search Filters: Filter Displayed Images Search Images Filter Collections ... Criteria << Add Name (Wildcards Allowed) Date Size Type Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s) Image Frame(s) Position of New Frame(s) Top Left of Margins Top Left of Page Top Left of Bleed Custom Position X: Y: Same as Page Margins Same as Page Same as Bleed Custom Size Insert Image into 0 Page(s) 0 Frame(s) Insert Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser PixmapExportPlugin Save as &Image... Export As Image Exports selected pages as bitmap images. Export successful Save as Image The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager unknown error plugin manager Cannot find symbol (%1) plugin manager Plugin: loading %1 plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. init failed plugin load error unknown plugin type plugin load error Plugin: %1 loaded plugin manager Plugin: %1 failed to load: %2 plugin manager Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager PluginManagerPrefsGui Plugin Manager Plugin How to run Type Load it? Plugin ID File You need to restart the application to apply the changes. Form PolygonProps Polygon Properties PolygonWidgetBase Form Corn&ers: Number of corners for polygons &Rotation: Degrees of rotation for polygons Sample Polygon Apply Convex/Concave Factor to change shape of Polygons Apply &Factor &Factor: A negative value will make the polygon concave (or star shaped), a positive value will make it convex % C&urvature: PositionSetterWidget Form X-pos: Y-pos: Width: Height: ... Preferences Preferences General Document Guides Typography Tools Hyphenator Fonts Preflight Verifier Color Management PDF Export Document Item Attributes Table of Contents and Indexes Keyboard Shortcuts Scrapbook Display External Tools Miscellaneous Plugins Printer PreferencesDialog Preferences Export... Defaults &Apply &OK &Cancel User Interface Paths Document Setup Guides Typography Item Tools Operator Tools Hyphenator Fonts Printer Color Management Document Information PDF Export Preflight Verifier Document Item Attributes Tables of Contents Sections Keyboard Shortcuts Scrapbook Display External Tools Miscellaneous Page Sizes Plugins Image Cache PrefsDialogBase Export... &Defaults &Apply All preferences can be reset here Apply all changes without closing the dialog Export current preferences into file Save Preferences PrefsManager PostScript Migrate Old Scribus Settings? Scribus has detected existing Scribus 1.3.5 preferences files. Do you want to migrate them to the new Scribus version? Could not open preferences file "%1" for writing: %2 Writing to preferences file "%1" failed: QIODevice status code %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Postscript Error Writing Preferences Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. No valid renderframe config found. Using defaults! Prefs_ColorManagement Form Color Management Document Options Activate Color Management Simulate Printer on the Screen Convert all colors to printer space Mark Colors out of Gamut Use Blackpoint Compensation Document Profiles RGB Images: CMYK Images: RGB Solid Colors: CMYK Solid Colors: Printer: Document Rendering Intents Images: Solid Colors: Monitor Profile Monitor: Monitor profiles can only be changed when no documents are open Perceptual Relative Colorimetric Saturation Absolute Colorimetric Prefs_Display Form Display Show Images Show Text Control Characters Show Rulers Show Rulers Relative to Page Show Text Chains Show Frames Show Layer Indicators Show Unprintable Area in Margin Color Show Bleed Area Show Page Shadow Show Preflight Verifier Warnings on the Page Scratch Space Left: Right: Top: Bottom: Display Scaling Scratch Space: Gaps Between Pages Pages Horizontal: Vertical: Scale% Resets the scale to the default dpi of your display Colors Page Fill: Selected Page Border: Frames: Locked Frames: Selected Frames: Linked Frames: Grouped Frames: Annotation Frames: Text Control Characters: Color for paper (onscreen) Mask the area outside the margins in the margin color Enable or disable the display of linked frames. Display non-printing characters such as paragraph markers in text frames Turns the display of frames on or off Turns the display of layer indicators on or off Turns the display of images on or off Turns the page shadow on or off Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Set the default zoom level Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size dpi Prefs_DocumentInformation Form Document Information Document Title: Author: Subject: Keywords: Description: Further Information Publisher: Contributors: Date: Type: Format: Identifier: Source: Language: Relation: Coverage: Rights: Prefs_DocumentItemAttributes Document Item Attributes Name Type Value Parameter Relationship Relationship To Auto Add To &Add Alt+A &Copy Alt+C &Delete Alt+D C&lear Alt+L None relationship Relates To Is Parent Of Is Child Of None auto add Text Frames Image Frames None types Boolean Integer Real Number String Prefs_DocumentSections 1, 2, 3, ... i, ii, iii, ... I, II, III, ... a, b, c, ... A, B, C, ... Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections Name Shown From To Style Start &Add Alt+A &Delete Alt+D Prefs_DocumentSetup Form Document Setup Page Size Size: ... Orientation: Units: Width: Height: Apply changes to all pages Apply changes to all master pages Layout Page Layout Saving && Undo Save in Compressed Format Autosave Enable Automatic Saving of Documents Interval: min Undo / Redo Enable Undo/Redo System Action History Length: Single Page pageLayoutButtonGroup Double Page 3-Fold 4-Fold First Page is: Size Margins && Bleeds Margins Bleeds Portrait Landscape Width of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Default page size, either a standard size or a custom size. More page sizes can be made visible by activating them in Preferences. Enable or disable more page sizes by jumping to Page Size preferences Default orientation of document pages Default unit of measurement for document editing When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Time period between saving automatically Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Apply the page size changes to all existing pages in the document Apply the page size changes to all existing master pages in the document Prefs_ExternalTools External Tools External Tools and Applications PostScript Interpreter &Name of Executable: <qt>Add the path for the Ghostscript interpreter. On Windows, please note it is important to note you need to use the program named gswin32c.exe - NOT gswin32.exe. Otherwise, this maybe cause a hang when starting Scribus.</qt> &Change... Alt+C Antialias text for EPS and PDF onscreen rendering Antialias &Text Alt+T Antialias graphics for EPS and PDF onscreen rendering Antialias &Graphics Alt+G Resolution: dpi Image Processing Tool Name of &Executable: <qt>File system location for graphics editor. If you use gimp and your distribution includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp.</qt> Web Browser PDF Viewer Uniconvertor Render Frames Configurations: Up Down Add Delete Change... External Editor: <qt>Path to the editor executable.</qt> Start with empty frame Use Embedded Editor Always use the configured DPI setting for calculating the size, even if the image file reports something different. Force DPI Rescan for the external tools if they do not exist in the already specified location &Rescan Alt+R Locate Ghostscript Locate your image editor Locate your web browser Locate your PDF viewer Locate the uniconvertor executable Locate your editor Uniconvertor executable not found! Locate a Configuration file Configuration files Change Command Enter new command: (leave empty to reset to default command; use quotes around arguments with spaces) Command: Prefs_Fonts Form Fonts Delete C&hange... A&dd... &Remove Available Fonts Font Substitutions Additional Paths Font Name Replacement Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Choose a Directory Prefs_Guides Form Guides Placement Placement: Snap Distance: px Grab Radius: Visibility Margins Page Grid Baseline Grid Distances Minor Grid Spacing: Baseline Grid Spacing: Major Grid Spacing: Baseline Grid Offset: Colors Guides: Margins: Major Grid: Minor Grid: Baseline Grid: In the Background In the Foreground Place guides in front of or behind objects on the page Distance between the minor grid lines Distance between the major grid lines Distance within which an object will snap to your placed guides. After setting this you will need to restart Scribus to set this setting. Radius of the area where Scribus will allow you to grab an objects handles.After setting this you will need to restart Scribus to set this setting. Color of the minor grid lines Color of the major grid lines Color of the guide lines you insert Color for the margin lines Color for the baseline grid Turns the basegrid on or off Distance between the lines of the baseline grid Distance from the top of the page for the first baseline Turns the gridlines on or off Turns the guides on or off Turns the margins on or off Prefs_Hyphenator Form Hyphenation A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. &Hyphenation Suggestions Enables automatic hyphenation of your text while typing. Hyphenate Text Automatically &During Typing Behaviour Language: Smallest Word: Length of the smallest word to be hyphenated. Characters Consecutive Hyphenations Allowed: Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Word Lists Exceptions Edit Ignore List Add a new Entry Edit Entry Exception List Prefs_ImageCache Enabling the image cache will significantly speed up the loading of images. Enable the cache if you are often working on large documents with lots of images and if you have plenty of disk space in your application data directory. Limit the total size of all files in the image cache directory to this amount. Limit the number of cache entries to this number. Set the level of compression for images in the cache. Higher values result in smaller cache files but also make writes to the cache slower. Form Image Cache Enable Image Cache Cache Size Limit: Mb Cache Entry Limit: Compression Level: Prefs_ItemTools Form Item Tools Text Columns: Column Gap: Tab Fill Character: Tab Width: Fill Color: Line Color: Shading: % Columns & Text Distances Top: Bottom: Left: Right: Font: Size: Color: Stroke: Preview Images Use Embedded Clipping Path Scaling Free Scaling scalingButtonGroup Horizontal Scaling: Vertical Scaling: ... Scale Image to Frame Size Keep Aspect Ratio On Screen Preview Full Resolution previewButtonGroup Normal Resolution Low Resolution Shapes Line Style: Line Width: Regular Polygons Lines Start Arrow: End Arrow: Hairline Woven silk pyjamas exchanged for blue quartz None tab fill Dot Hyphen Underscore Custom Prefs_KeyboardShortcuts Keyboard Shortcuts Search: Action Shortcut Shortcut for Selected Action &No Key Alt+N &User Defined Key Alt+U Set &Key Alt+K CTRL+ALT+SHIFT+W Loadable Shortcut Sets Keyboard shortcut sets available to load Load the selected shortcut set &Load Alt+L Import a shortcut set into the current configuration &Import... Alt+I Export the current shortcuts into an importable file &Export... Alt+E Reload the default Scribus shortcuts &Reset Alt+R Select a Key set file to read Key Set XML Files (*.xml) Select a Key set file to save to Export Keyboard Shortcuts to File Enter the name of the shortcut set: Alt Ctrl Shift Meta Meta+ Shift+ Alt+ Ctrl+ This key sequence is already in use Prefs_Miscellaneous Form Miscellaneous Always ask before fonts are replaced when loading a document Preview of current Paragraph Style is visible when editing Styles Lorem Ipsum Always use standard Lorem Ipsum text Paragraph Count: Prefs_OperatorTools Form Operator Tools Zoom Minimum: Maximum: Stepping: % Miscellaneous Item Duplicate X Displacement: Y Displacement: Rotation Tool Constrain To: Minimum magnification allowed Maximum magnification allowed Change in magnification for each zoom operation Horizontal displacement of page items Vertical displacement of page items Constrain value for the rotation tool when the Control key is pressed Prefs_PDFExport Form PDF Export Export Range All Pages rangeButtonGroup Choose Pages ... Rotation and Mirroring Rotation: Page Mirroring: Page Binding: Resolution for EPS Graphics: dpi Clip to Printer Margins Limit Maximum Image Resolution to: Allow Copying Text and Graphics Registration Mark Offset: File Options Pages Compatibility: Generate Thumbnails Save Linked Text Frames as PDF Articles Include Layers Include Bookmarks Embed PDF && EPS Files (Experimental) Compression Compress Text and Vector Graphics Image Compression Method: Image Compression Quality: Security Use Encryption Passwords Owner: User: Settings Allow Printing the Document Allow Changing the Document Allow Adding Annotations and Fields Color Output Intended For: Convert Spot Colors to Process Colors Solid Colors Use Color Profile Profile: Rendering Intent: Images Do not use Embedded Color Profiles Custom Rendering Use Custom Rendering Color: Frequency: Angle: ° Spot Function: Pre-Press Printer Marks Page Information Registration Marks Crop Marks Bleed Marks Color Bars Bleed Settings Use Document Bleeds PDF/X-3 Output Intent Output Profile: Information String: Fonts Available Fonts Embed All Outline All Fonts to Embed Fonts to Outline Extras Enable Presentation Effects Display Duration: Effect Duration: Effect Type: Moving Lines: From the: Direction: s Apply Effect to All Pages Show Page Previews Viewer Document Layout Single Page Continuous Pages Double Page Left Double Page Right Visual Appearance Use Viewer's Default Use Full Screen Mode Display Bookmarks Tab Display Thumbnails Display Layers Tab Hide Viewer's Menu Bar Hide Viewer's Tool Bar Zoom Pages to fit Viewer Window Special Actions Javascript to be executed when PDF document is opened: Automatically rotate the exported pages Export all pages to PDF Export a range of pages to PDF Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Determines the PDF compatibility.<br/>The default is <b>PDF 1.3</b> which gives the widest compatibility.<br/>Choose <b>PDF 1.4</b> if your file uses features such as transparency or you require 128 bit encryption.<br/><b>PDF 1.5</b> is necessary when you wish to preserve objects in separate layers within the PDF.<br/><b>PDF/X-3</b> is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer.<br/><b>PDF/X-1a</b> is for blind exchange with colors strictly specified in CMYK or spot colors.<br/><b>PDF/X-4</b> is an extension of PDF/X-3 to support transparancy and layering. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Generate PDF Articles, which is useful for navigating linked articles in a PDF. Layers in your document are exported to the PDF Only available if PDF 1.5 is chosen. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Export PDFs in image frames as embedded PDFs. This does *not* yet take care of colorspaces, so you should know what you are doing before setting this to 'true'. Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size. Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options. Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Even with Maximum selected, there is always some quality loss with jpeg. Limits the resolution of your bitmap images to the selected DPI. Images with a lower resolution will be left untouched. Leaving this unchecked will render them at their native resolution. Enabling this will increase memory usage and slow down export. DPI (Dots Per Inch) for image export. Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Choose a master password which enables or disables all the security features in your exported PDF Choose a password for users to be able to read your PDF. Allow printing of the PDF. If un-checked, printing is prevented. Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied. Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented. Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Choose Grayscale when you want a grey scale PDF. This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. Embed a color profile for solid colors Color profile for solid colors Rendering intent for solid colors Embed a color profile for images Do not use color profiles that are embedded in source images Color profile for images Rendering intent for images Mirror Page(s) horizontally Mirror Page(s) vertically Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Do not show objects outside the margins in the exported file Creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing This creates bleed marks which are indicated by _ . _ and show the bleed limit Add registration marks to each separation Add color calibration bars Add document information which includes the document title and page numbers Indicate the distance offset for the registration marks Use the existing bleed settings from the document preferences Output profile for printing. If possible, get some guidance from your printer on profile selection. Mandatory string for PDF/X or the PDF will fail PDF/X conformance. We recommend you use the title of the document. Automatic Lossy - JPEG Lossless - Zip None Maximum High Medium Low Minimum Left Margin Right Margin Screen / Web Printer Grayscale Simple Dot Line Round Ellipse Perceptual Relative Colorimetric Saturation Absolute Colorimetric Page No Script InfoString No Effect Blinds Box Dissolve Glitter Split Wipe Push Cover Uncover Fade Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. Enables presentation effects when using Adobe&#174; Reader&#174; and other PDF viewers which support this in full screen mode. Show page previews of each page listed above. Length of time the page is shown before the presentation starts on the selected page. Setting 0 will disable automatic page transition. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Type of the display effect. Direction of the effect of moving lines for the split and blind effects. Starting position for the box and split effects. Direction of the glitter or wipe effects. Apply the selected effect to all pages. Convert all glyphs in the document to outlines. Show the document in single page mode Show the document in single page mode with the pages displayed continuously end to end like a scroll Show the document with facing pages, starting with the first page displayed on the left Show the document with facing pages, starting with the first page displayed on the right Use the viewer's defaults or the user's preferences if set differently from the viewer defaults Enables viewing the document in full screen Display the bookmarks upon opening Display the page thumbnails upon opening Forces the displaying of layers. Useful only for PDF 1.5+. Hides the Tool Bar which has selection and other editing capabilities Hides the Menu Bar for the viewer, the PDF will display in a plain window. Fit the document page or pages to the available space in the viewer window. Prefs_PageSizes Form Page Sizes Available Sizes Active Sizes Prefs_Paths Form Paths Documents: &Change... Alt+C Color Profiles: C&hange... Alt+H Scripts: Ch&ange... Alt+A Document Templates: Cha&nge... Alt+N Default documents directory Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc Default Scripter scripts directory Additional directory for document templates Choose a Directory Prefs_Plugins Form Plugins Plugin How to run Type Load it? Plugin ID File You need to restart the application to apply the changes. Prefs_PreflightVerifier Form Preflight Verifier Show pages without errors Show errors for items on layers that will not print Profile Setup Output Profile: Add New Profile Remove Profile Profile Options Ignore all errors Automatic check before printing or exporting Check for missing glyphs Check for items not on a page Check for overflow in text frames Check for used transparencies Check for missing images Check image resolution Minimum Resolution: dpi Maximum Resolution: Check for placed PDF files Check for GIF images Check for PDF Annotations and Fields Check for Visible/Printable mismatch in layers Ignore non-printable layers Prefs_Printer Form Printing Destination Alternative Printer Command Command: General Options Output: Normal Separations Include PDF Annotations and Links Page Mirror Page(s) Horizontally Mirror Page(s) Vertically Set Media Size Clip to Printer Margins Color Apply Under Color Removal Convert Spot Colors to Process Colors Apply ICC Profiles PostScript Level 1 Level 2 Level 3 Print In: Color (If Available) Grayscale Marks and Bleeds Crop Marks Bleed Marks Registration Marks Color Bars Offset: Bleed Settings Do not show objects outside the margins on the printed page Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options Sets the PostScript Level. Setting to Level 1 or 2 can create huge files A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Allows you to embed color profiles in the print stream when color management is enabled This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. File All Prefs_Scrapbook Form Scrapbook Send Copied Items Automatically to the Scrapbook Keep Copied Items Permanently Across Sessions Write Item Previews to the Scrapbook Directory Number of Copied Items to Keep in Scrapbook This enables the scrapbook to be used an extension to the copy/paste buffers. Simply copying an object or grouped object will send this to the Scrapbook automatically This enables copied items to be kept permanently in the scrapbook Save generated scrapbook previews in the scrapbook directory The minimum number is 1; the maximum is 100 Prefs_Scripter Form Scripter Extensions Enable Extension Scripts Startup Script: Change... Console Base Texts: Comments: Keywords: Signs: Errors: Strings: Numbers: Locate Startup Script Prefs_ShortWords Form Save Reset User settings System wide configuration Short Words User configuration exists already. Do you really want to overwrite it? Cannot write file %1. User settings saved System wide configuration reloaded Cannot open file %1 Prefs_TableOfContents Form Table of Contents &Add Alt+A &Delete Alt+D Properties Item Attribute Name: The Item Attribute that will be set on frames used as a basis for creation of the entries Destination Frame: The frame the table of contents will be placed into Page Number Placement: Place page numbers of the entries at the beginning or the end of the line, or not at all Paragraph Style: The paragraph style used for the entry lines Include frames that are set to not print as well List Non-Printing Entries Beginning End Not Shown Table of Contents %1 Prefs_Typography Form Typography Subscript Displacement: % Scaling: Superscript Underline Line Width: Auto Strikeout Small Caps Automatic Line Spacing Line Spacing: Displacement below the baseline of the normal font on a line Relative size of the subscript compared to the normal font Displacement above the baseline of the font on a line Relative size of the superscript compared to the normal font Displacement below the baseline of the normal font expressed as a percentage of the fonts descender Line width expressed as a percentage of the font size Displacement above the baseline of the normal font expressed as a percentage of the fonts ascender Relative size of the small caps font compared to the normal font Percentage increase over the font size for the line spacing Prefs_UserInterface Form User Interface Main Window Appearance &Language: &Theme: Use Small Widgets on Palettes Use Tabs for Documents &Recent Documents: Font Sizes &Menus: pt &Palettes: Story Editor Font: Font Color: Use Smart Text Selection Interactivity Time before resize or move starts: ms &Wheel Jump: Start Up Show Splashscreen Show Startup Dialog Select your default language for Scribus to run with. Leave this blank to choose based on environment variables. You can still override this by passing a command line option when starting Scribus Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Palette windows will use smaller (space savy) widgets. Requires application restart Number of recently edited documents to show in the File menu Default font size for the menus and windows Default font size for the tool windows Number of lines Scribus will scroll for each move of the mouse wheel PresetLayout None layout type Gutenberg Magazine Fibonacci Golden Mean Nine Parts When you have selected a Document Layout other than Single Page, you can select a predefined page layout here. 'None' leaves margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins to the same value. Leading is Left/Inside value. PrintDialog File Print Current Pa&ge Print Normal All Cyan Magenta Yellow Black Failed to retrieve printer settings PostScript Files (*.ps);;All Files (*) Inside: Outside: Save As PrintDialogBase Setup Printer Print Destination &Options... &File: C&hange... Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options A&lternative Printer Command Co&mmand: Range Print &All N&umber of Copies: Print Current Pa&ge Print &Range Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Options Print Normal Print Separations Print in Color if Available Print in Grayscale Sets the PostScript Level. Setting to Level 1 or 2 can create huge files Advanced Options Page Mirror Page(s) Horizontal Mirror Page(s) Vertical Set Media Size Color Apply Under Color Removal Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Convert Spot Colors to Process Colors Allows you to embed color profiles in the print stream when color management is enabled Apply Color Profiles Marks This creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing Crop Marks Add registration marks which are added to each separation Registration Marks This creates bleed marks which are indicated by _ . _ and show the bleed limit Bleed Marks Add color calibration bars Color Bars Offset: Indicate the distance offset for the registration marks Bleeds Top: Distance for bleed from the top of the physical page Left: Distance for bleed from the right of the physical page Bottom: Distance for bleed from the bottom of the physical page Right: Distance for bleed from the left of the physical page Use the existing bleed settings from the document preferences Use Document Bleeds Preview... &Print Cancel Include PDF Annotations and Links into the output. Note: PDF Forms will not be exported. Include PDF Annotations and Links This enables you to explicitly set the media size of the PostScript file. Not recommended unless requested by your printer. Clip to Printer Margins A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. PropertiesPalette Fixed Linespacing Automatic Linespacing Align to Baseline Grid &X1: X&2: Y&1: &Y2: &X-Pos: &Width: &Y-Pos: &Height: Distance between columns Column width No Style Name "%1" isn't unique.<br/>Please choose another. Properties X, Y, &Z &Text &Image &Shape &Line &Colors &Group Name Geometry &Rotation: Basepoint: Level Shape: Saturation R&ound Corners: Colu&mns: Gap: Width: To&p: &Bottom: &Left: &Right: T&abulators... Path Text Properties &Transparency Show Curve Start Offset: Distance from Curve: Fill Rule Even-Odd Non Zero Text &Flow Around Frame Disabled Use Frame &Shape Use &Bounding Box &Use Contour Line &Free Scaling Actual X-DPI: Actual Y-DPI: X-Sc&ale: Y-Scal&e: Rotation: Scale &To Frame Size P&roportional Image Effects Extended Image Properties Input Profile: Rendering Intent: PDF Compression Method: PDF Compression Quality: Perceptual Relative Colorimetric Absolute Colorimetric Global Automatic Lossy - JPEG Lossless - Zip None Maximum High Medium Low Minimum Left Point End Points &Basepoint: T&ype of Line: Start Arrow: End Arrow: Line &Width: Ed&ges: Miter Join Bevel Join Round Join Flat Cap Square Cap Round Cap &Endings: Cell Lines Line at Top Line at the Left Line at the Right Line at Bottom % pt Name of selected object Horizontal position of current basepoint Vertical position of current basepoint Width Height Rotation of object at current basepoint Point from which measurements or rotation angles are referenced Group the selected objects Flip Horizontal Flip Vertical Move one level up Move one level down Move to front Move to back Indicates the level the object is on, 0 means the object is at the bottom Lock or unlock the object Lock or unlock the size of the object Disable text flow from lower frames around object Use the frame shape for text flow of text frames below the object. Use the bounding box, which is always rectangular, instead of the frame's shape for text flow of text frames below the object. When chosen, the contour line can be edited with the Edit Shape Tool on the palette further above. When edited via the shape palette, this becomes a second separate line originally based on the frame's shape for text flow of text frames below the object. Font Size Offset to baseline of characters Scaling width of characters Scaling height of characters Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color. Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color. Saturation of color of text stroke Saturation of color of text fill Right to Left Writing Manual Tracking Compression method used in PDF export for the image Compression quality used in PDF export for the image Line Spacing Change settings for left or end points Pattern of line Thickness of line Type of line joins Type of line end Line style of current object Choose the shape of frame... Edit shape of the frame... Set radius of corner rounding Number of columns in text frame Switches between Gap or Column width Distance of text from top of frame Distance of text from bottom of frame Distance of text from left of frame Distance of text from right of frame Edit tab settings of text frame... Allow the image to be a different size to the frame Horizontal offset of image within frame Vertical offset of image within frame Resize the image horizontally Resize the image vertically Keep the X and Y scaling the same Keep the aspect ratio Make the image fit within the size of the frame Use image proportions rather than those of the frame Source profile of the image Rendering intent for the image Auto Default Stair Step Skew Flip Text Type: Use Image Clip Path Paragraph St&yle: Character St&yle: Word Tracking Min: Norm: Glyph Extension Max: Use the clipping path of the image Paragraph style of currently selected text or paragraph Character style of currently selected text or paragraph Remove Direct Paragraph Formatting Remove Direct Character Formatting Minimal width of spaces between words Normal width of spaces between words Minimal shrinkage of glyphs for justification Maximal extension of glyphs for justification Enable or disable exporting of the object Custom &Edit... First Line Offset Maximum Ascent Font Ascent Color & Effects Advanced Settings Style Settings Baseline Ungroup the selected group Select the line spacing mode. Set the height of the first line of the text frame to use the tallest height of the included characters Set the height of the first line of text frame to use the full ascent of the font(s) in use Set the height of the first line of the text frame to the specified line height &Page Number: Columns & Text Distances Reset Optical Margins Hairline None optical margins Both Sides optical margins Left Only optical margins Right Only optical margins Arrow head style for start of line Arrow head style for end of line Effective horizontal DPI of the image after scaling Effective vertical DPI of the image after scaling PythonConsole &Open... &Save Save &As... &File &Run Run As &Console &Save Output... &Script Scribus Python Console Script Console Write your commands here. A selection is processed as script Output of your script Python Scripts (*.py *.PY) Open Python Script File Save the Python Commands in File Text Files (*.txt) Save Current Output Col: %1 Row: %2/%3 Ctrl+O Ctrl+S &Quit This is a standard Python console with some known limitations. Please consult the Scribus Scripter documentation for futher information. QColorDialog Hu&e: &Sat: &Val: &Red: &Green: Bl&ue: A&lpha channel: &Basic colors &Custom colors &Define Custom Colors >> OK Cancel &Add to Custom Colors Select color QFileDialog Copy or Move a File Read: %1 Write: %1 File &name: File &type: One directory up Cancel All Files (*) Name Size Type Date Attributes OK Look &in: Back Create New Folder List View Detail View Preview File Info Preview File Contents Read-write