getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Palauttaa tuplen (C, M, Y, K) värille "name" nykyisestä asiakirjasta. Jos asiakirjaa ei ole avoinna, palauttaa värin oletusväreistä. Saattaa nostaa NotFoundError:n, jos väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Vaihtaa värin "name" vastaamaan väriä c, m, y, k (kaikki määritelty välillä 0, 255). deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Poistaa värin "nimi", joka korvataan värillä "replace". Oletuksena "replace" on None (läpinäkyvä). deleteColors toimii asiakirjassa määritellyillä väreillä, asiakirja on avoinna. Saattaa nostaa NotFoundError:n, jos nimettyä väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Jokainen ilmentymä väristä "name" korvataan värillä "replace". Saattaa nostaa NotFoundError:n, jos nimettyä väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getColorNames() -> list Näyttää dialogin "Uusi asiakirja". Luo uuden asiakirjan, jos käyttäjä hyväksyy asetukset. Asiakirjaa ei luoda, jos käyttäjä painaa Peruuta-painiketta. Palauttaa true, jos uusi asiakirja luotiin. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Näyttää yleisen "Kysy string"-dialogin ja palauttaa sen arvon. Parametrit: ikkunan otsikko, ikkunan teksti ja oletusarvo newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Sulkee aktiivisen asiakirjan, ilman tallennusdialogia. Saattaa heittää NoDocOpenError, jos suljettavia asiakirjoja ei ole haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Palauttaa true, jos yksikin asiakirja on avoinna. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Avaa asiakirjan "name". Saattaa aiheuttaa ScribusErrorin, jos asiakirjaa ei voida avata. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Tallennusdialogi. Tallennuksen epäonnistumista ei voi tällä hetkellä päätellä mistään. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Tallentaa aktiivisen asiakirjan nimellä "nimi", joka voi olla täydellinen tai suhteellinen polku. Saattaa aiheuttaa ScribusError:n, jos tallennus epäonnistuu. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Vaihtaa asiakirjan mittayksikköä. Mahdolliset yksiköt on määritelty vakiona UNIT_<type>. Saattaa aiheuttaa ValueError:n, jos käytetään virheellistä yksikköä. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Palauttaa asiakirjan mittayksikön. Arvo on yksi UNIT_* vakioista. UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Lataa kappaletyylit Scribus-asiakirjasta "filename" aktiiviseen asiakirjaan. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Palauttaa täyttövärin nimen kohteelle "name". Jos "name" ei ole annettu käytetään valittuna olevaa kohdetta. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Palauttaa kohteen "name" viivan värin. Ilman "name":a palauttaa valittuna olevan kohteen kehyksen värin. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Palauttaa kohteen "name" viivan leveyden. Jos "name":a ei anneta käytetään valittuna olevaa kohdetta. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Palauttaa kohteen "name" viivan värin sävyn. Jos "name":a ei anneta käytetään valittuna olevaa kohdetta. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Siirtää kohdetta "name" arvoilla dx ja dy suhteessa nykyiseen sijaintiin. Etäisyydet ilmaistaan asiakirjassa käytössä olevalla yksiköllä (katso UNIT-vakio). Jos "name" ei ole määritelty, käytetään valittuna olevaa kohdetta. Jos kohde "name" kuuluu ryhmään, koko ryhmää siirretään. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Estää sivun uudelleenpiirron, kun bool=False. Muuten uudelleen piirto on käytössä. Tämä asetus jää voimaan vaikka skriptistä poistutaan. Varmista, että kutsut setRedraw(True) finally: -lauseessa ylimmällä tasolla skriptissäsi. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Luo uuden nelikulmion nykyiselle sivulle ja palauttaa luodun kohteen nimen. Koordinaatit on annettava asiakirjassa käytössä olevalla yksiköllä. Katso (UNIT vakiot). "name":n tulee olla yksilöllinen tunniste kohteelle, koska tarvitset nimeä myöhemmin viitatessasi nelikulmioon. Jos "name":a ei anneta Scribus luo sen. Saattaa nostaa NameExistsError:n, jos annettu nimi on jo olemassa. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Asettaa liukuväritäytön kohteelle "name". Värin kuvaukset ovat samat kuin setFillColor():lla ja setFillShade():lla. Katso vakiot FILL_<type>. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Palauttaa fontin koon pisteinä tekstikehykselle "name". Jos tekstikehyksessä on tekstiä valittuna palautetaan valinnan ensimmäisen fontin koko. Jos "name" ei ole määritelty, käytetään valittuna olevaa kohdetta. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. e(size, ["name"]). setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Muuta tekstikehys "name" ääriviivoiksi. Jos nimeä ei anneta, käytetään valittuna olevaa kohdetta. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Asettaa tekstin "string" Scribuksen tilariville. Teksti täytyy olla UTF8 koodattu tai 'unicode' teksti (suositeltavaa). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Tyhjentää etenemispalkin (progress bar). Katso progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Asettaa etenemispalkin suurimman mahdollisen arvon. Katso progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Aseta etenemispalkki nr:n osoittamaan tilaan. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [Ei tuettu!] Tämä saattaa rikkoa asoita. Eli älä käytä ainakaan vielä. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Ota käyttöön/Poista käytöstä tallennuskuvake työkalurivillä ja Tiedosto-valikossa. On hyvä kutsua tätä funktiota, kun olet muokannut asiakirjaa. Scribus ei huomaa automaattisesti skriptin tekemiä muutoksia. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. @default getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getColorNames() -> list Näyttää dialogin "Uusi asiakirja". Luo uuden asiakirjan, jos käyttäjä hyväksyy asetukset. Asiakirjaa ei luoda, jos käyttäjä painaa Peruuta-painiketta. Palauttaa true, jos uusi asiakirja luotiin. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Palauttaa täyttövärin nimen kohteelle "name". Jos "name" ei ole annettu käytetään valittuna olevaa kohdetta. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Siirtää kohdetta "name" arvoilla dx ja dy suhteessa nykyiseen sijaintiin. Etäisyydet ilmaistaan asiakirjassa käytössä olevalla yksiköllä (katso UNIT-vakio). Jos "name" ei ole määritelty, käytetään valittuna olevaa kohdetta. Jos kohde "name" kuuluu ryhmään, koko ryhmää siirretään. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Estää sivun uudelleenpiirron, kun bool=False. Muuten uudelleen piirto on käytössä. Tämä asetus jää voimaan vaikka skriptistä poistutaan. Varmista, että kutsut setRedraw(True) finally: -lauseessa ylimmällä tasolla skriptissäsi. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Luo uuden nelikulmion nykyiselle sivulle ja palauttaa luodun kohteen nimen. Koordinaatit on annettava asiakirjassa käytössä olevalla yksiköllä. Katso (UNIT vakiot). "name":n tulee olla yksilöllinen tunniste kohteelle, koska tarvitset nimeä myöhemmin viitatessasi nelikulmioon. Jos "name":a ei anneta Scribus luo sen. Saattaa nostaa NameExistsError:n, jos annettu nimi on jo olemassa. setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Asettaa liukuväritäytön kohteelle "name". Värin kuvaukset ovat samat kuin setFillColor():lla ja setFillShade():lla. Katso vakiot FILL_<type>. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Palauttaa fontin koon pisteinä tekstikehykselle "name". Jos tekstikehyksessä on tekstiä valittuna palautetaan valinnan ensimmäisen fontin koko. Jos "name" ei ole määritelty, käytetään valittuna olevaa kohdetta. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Asettaa tekstin "string" Scribuksen tilariville. Teksti täytyy olla UTF8 koodattu tai 'unicode' teksti (suositeltavaa). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Palauttaa tuplen (C, M, Y, K) värille "name" nykyisestä asiakirjasta. Jos asiakirjaa ei ole avoinna, palauttaa värin oletusväreistä. Saattaa nostaa NotFoundError:n, jos väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Vaihtaa värin "name" vastaamaan väriä c, m, y, k (kaikki määritelty välillä 0, 255). deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Poistaa värin "nimi", joka korvataan värillä "replace". Oletuksena "replace" on None (läpinäkyvä). deleteColors toimii asiakirjassa määritellyillä väreillä, asiakirja on avoinna. Saattaa nostaa NotFoundError:n, jos nimettyä väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Jokainen ilmentymä väristä "name" korvataan värillä "replace". Saattaa nostaa NotFoundError:n, jos nimettyä väriä ei löydy. Saattaa nostaa ValueError:n, jos värin nimi on viallinen. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Näyttää yleisen "Kysy string"-dialogin ja palauttaa sen arvon. Parametrit: ikkunan otsikko, ikkunan teksti ja oletusarvo closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Sulkee aktiivisen asiakirjan, ilman tallennusdialogia. Saattaa heittää NoDocOpenError, jos suljettavia asiakirjoja ei ole haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Palauttaa true, jos yksikin asiakirja on avoinna. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Avaa asiakirjan "name". Saattaa aiheuttaa ScribusErrorin, jos asiakirjaa ei voida avata. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Tallennusdialogi. Tallennuksen epäonnistumista ei voi tällä hetkellä päätellä mistään. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Tallentaa aktiivisen asiakirjan nimellä "nimi", joka voi olla täydellinen tai suhteellinen polku. Saattaa aiheuttaa ScribusError:n, jos tallennus epäonnistuu. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Vaihtaa asiakirjan mittayksikköä. Mahdolliset yksiköt on määritelty vakiona UNIT_<type>. Saattaa aiheuttaa ValueError:n, jos käytetään virheellistä yksikköä. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Palauttaa asiakirjan mittayksikön. Arvo on yksi UNIT_* vakioista. UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Lataa kappaletyylit Scribus-asiakirjasta "filename" aktiiviseen asiakirjaan. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Palauttaa kohteen "name" viivan värin. Ilman "name":a palauttaa valittuna olevan kohteen kehyksen värin. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Palauttaa kohteen "name" viivan leveyden. Jos "name":a ei anneta käytetään valittuna olevaa kohdetta. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Palauttaa kohteen "name" viivan värin sävyn. Jos "name":a ei anneta käytetään valittuna olevaa kohdetta. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. e(size, ["name"]). setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Muuta tekstikehys "name" ääriviivoiksi. Jos nimeä ei anneta, käytetään valittuna olevaa kohdetta. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Tyhjentää etenemispalkin (progress bar). Katso progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Asettaa etenemispalkin suurimman mahdollisen arvon. Katso progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Aseta etenemispalkki nr:n osoittamaan tilaan. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [Ei tuettu!] Tämä saattaa rikkoa asoita. Eli älä käytä ainakaan vielä. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Ota käyttöön/Poista käytöstä tallennuskuvake työkalurivillä ja Tiedosto-valikossa. On hyvä kutsua tätä funktiota, kun olet muokannut asiakirjaa. Scribus ei huomaa automaattisesti skriptin tekemiä muutoksia. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. AIPlug Importing: %1 Tuodaan: %1 Analyzing File: Tutkitaan tiedostoa: Group%1 Ryhmä%1 Generating Items Luodaan kohteita About Contributions from: Työhön osallistuneita: &About T&ietoja A&uthors &Tekijät &Translations &Käännökset &Online &Verkossa &Close &Sulje Development Team: Kehitysryhmä: Official Documentation: Virallinen dokumentaatio: Other Documentation: Muu dokumentaatio: Homepage Kotisivu Online Reference Materiaali verkossa Bugs and Feature Requests Bugit ja parannusehdotukset Mailing List Postituslista Official Translations and Translators: Käännökset ja kääntäjät: Previous Translation Contributors: Aikaisempia kääntäjiä: About Scribus %1 Tietoja Scribuksesta %1 Wiki Wiki %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 Käytetään Ghostscriptin versiota %1 No Ghostscript version available Ghostscriptiä ei löytynyt Build ID: Käännöstunnus Mac OS&#174; X Aqua Port: Mac OS&#174; X Aqua -versio: Windows&#174; Port: Windows&#174; -versio: Tango Project Icons: Tango-projektin kuvakkeet: &Updates &Päivitykset Check for updates to Scribus. No data from your machine will be transferred off it. Tarkista Scribus-päivitykset. Tietoa koneeltasi ei lähetetä eteenpäin. OS/2&#174;/eComStation&#8482; Port: OS/2&#174;/eComStation&#8482;-versio: Splash Screen: Latausikkuna: This panel shows the version, build date and compiled in library support in Scribus. Tämä ikkuna näyttää version, käännöspäivämäärän sekä Scribuksen käyttämät kirjastot. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. Windows-versio ei käytä fontconfig- eikä CUPS-kirjastoja. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribus-versio Check for Updates Tarkista päivitykset Abort Update Check Peruuta päivitysten tarkistus Developer Blog Kehittäjien blogi &Licence &Lisenssi Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Ohjeiden kääntäjät: Webmasters: Sivustojen ylläpitäjät Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Filename: Tiedostonimi: Version: Versio: Enabled: Käytössä: Release Date: Julkaisupäivämäärä: Description: Kuvaus: Author(s): Tekijät: Copyright: Copyright: License: Lisenssi: Scribus: About Plug-ins Scribus: Tietoja liitännäisistä ActionManager &New &Uusi &Open... &Avaa... &Close &Sulje &Save &Tallenna Save &As... Tallenna &nimellä... Re&vert to Saved &Palauta tallennettu Collect for O&utput... &Kerää asiakirja... Get Text... Hae teksti... Append &Text... Jatka &tekstiä... Get Image... Hae kuva... Save &Text... Tallenna &teksti... Save as P&DF... Tallenna P&DF:nä... Document &Setup... A&siakirjan asettelu... &Print... T&ulosta... &Quit &Lopeta &Undo &Kumoa &Redo &Tee uudelleen &Item Action Mode &Objektikohtainen toimintohistoria Cu&t &Leikkaa &Copy &Kopioi &Paste L&iitä Select &All V&alitse kaikki &Deselect All &Poista valinnat &Search/Replace... Et&si/Korvaa... Edit Image... Muokkaa kuvaa... C&olors... &Värit... &Master Pages... &Mallisivut... P&references... &Asetukset... %1 pt %1 pt &Other... M&uu... &Left &Vasen &Center &Keskitetty &Right &Oikea &Block &Molemmat reunat &Forced &Pakotettu &Normal &Normaali &Underline &Alleviivattu Underline &Words Alleviivaa &sanat &Strike Through &Yliviivaa &All Caps &Versaalit Small &Caps &Kapiteelit Su&perscript &Yläindeksi Su&bscript &Alaindeksi S&hadow &Varjo &Image Effects &Kuvaefektit &Tabulators... &Sarkaimet... D&uplicate &Kopioi &Multiple Duplicate &Useita kopioita &Transform &Delete &Poista &Group &Ryhmitä &Ungroup Pur&a ryhmitys Is &Locked On &lukittu Si&ze is Locked Koko on l&ukittu Lower to &Bottom Vie &alimmaiseksi Raise to &Top Tuo &päällimmäiseksi &Lower Vie a&laspäin &Raise &Tuo ylöspäin Send to S&crapbook &Vie leikekirjaan &Attributes... &Muuttujat... I&mage Visible Kuva &näkyvissä &Update Image &Päivitä kuva Adjust Frame to Image Sovita kehys kuvaan Embed Image Extended Image Properties Kuvan ominaisuudet &Low Resolution &Alhainen tarkkuus &Normal Resolution &Normaali tarkkuus &Full Resolution &Täysi tarkkuus Is PDF &Bookmark &On PDF-kirjanmerkki Is PDF A&nnotation On PDF-&merkintä Annotation P&roperties Merkinnän &ominaisuudet Field P&roperties &Kentän ominaisuudet &Edit Shape... &Muokkaa kuviota... &Attach Text to Path K&iinnitä teksti polkuun &Detach Text from Path Poi&sta teksti polulta &Combine Polygons Y&hdistä monikulmiot Split &Polygons &Erota monikulmiot &Bezier Curve &Bezier-viiva &Image Frame &Kuvakehys &Polygon &Monikulmio &Text Frame &Tekstikehys &Glyph... &Merkki... Sample Text Esimerkkiteksti &Insert... &Lisää... Im&port... &Tuo... &Delete... &Poista... &Copy... &Kopioi... &Move... &Siirrä... &Apply Master Page... &Käytä mallisivua... Manage &Guides... &Apuviivojen hallinta... &50% &50 % &75% &75 % &100% &100 % &200% &200 % Show &Margins Näytä &reunukset Show &Frames Näytä &kehykset Show &Images Näytä &kuvat Show &Grid Näytä ruu&dukko Show G&uides Näytä &apuviivat Show &Baseline Grid Näytä p&eruslinja Show &Text Chain Näytä &tekstin kulku Show Control Characters Näytä tulostumattomat merkit Sn&ap to Grid Kiinnitä r&uudukkoon Sna&p to Guides Kiinnitä a&puviivoihin &Properties &Ominaisuudet &Scrapbook &Leikekirja &Layers &Tasot &Arrange Pages &Järjestä sivuja &Bookmarks &Kirjanmerkit &Measurements &Mittaus Action &History T&oimintohistoria Preflight &Verifier &Tarkastustyökalu &Align and Distribute &Jaa ja tasaa Symbols &Tools Työ&kalut P&DF Tools &PDF-työkalut Select Item Valitse kohde Rotate Item Kierrä kohdetta Zoom in or out Lähennä tai loitonna Zoom in Lähennä Zoom out Loitonna Edit Contents of Frame Muokkaa kehyksen sisältöä Edit Text... Muokkaa tekstiä... Link Text Frames Linkitä tekstikehykset Unlink Text Frames Pura tekstikehysten linkitys &Eye Dropper &Värivalitsin Copy Item Properties Kopioi kohteen ominaisuudet Insert Calligraphic Line Insert 3D Annotation &Hyphenate Text &Tavuta teksti &Generate Table Of Contents &Luo sisällysluettelo &About Scribus &Tietoja Scribuksesta About &Qt Tietoja &Qt:sta Toolti&ps &Työkaluvihjeet Scribus &Manual... &Ohje... Smart &Hyphen &Tavuviiva Non Breaking Dash Sitova viiva Non Breaking &Space Sitova &välilyönti Page &Number Sivu&numero New Line Rivinvaihto Frame Break Kehyksen vaihto Column Break Palstan vaihto Copyright Copyright Registered Trademark Rekisteröity tavaramerkki Trademark Tavaramerkki Bullet Luetelmapallo Em Dash Pitkä viiva (em) En Dash Lyhyt viiva (en) Figure Dash Numeroviiva Quotation Dash Ajatusviiva Toggle Palettes Näytä/piilota ikkunat Toggle Guides Näytä/piilota apuviivat Dehyphenate Text Poista tavutus Print Previe&w &Esikatselu &JavaScripts... &JavaScriptit... More Info... Lisätietoja... Convert to Master Page... Lisää mallisivuksi... Manage Page Properties... Sivun asetukset... &Cascade &Lomittain &Tile &Vierekkäin &Outline Document Outline Palette &Rakenne ff ff fi fi fl fl ffi ffi ffl ffl ft ft st st &Printing Enabled &Tulostetaan &Flip Horizontally &Peilaa vaakasuunnassa &Flip Vertically &Peilaa pystysuunnassa Show Rulers Näytä viivaimet Solidus Solidus Middle Dot Rivinkeskinen piste En Space Puolikas Em Space Neliö Thin Space Ohuke Thick Space 1/3 Neliö Mid Space 1/4 Neliö Hair Space Hieno väli S&tyles... &Tyylit... &Outline type effect &Rakenne &Outlines Convert to oulines &Ääriviivat Paste (&Absolute) Liitä (&absoluuttinen) C&lear T&yhjennä Show Text Frame Columns Näytä tekstikehyksen palstat Save as &EPS... Tallenna &EPS-tiedostoksi... Patterns... Kuvioinnit... Send to Patterns Vie kuvioinniksi &Frame... &Kehys... Preview Mode Esikatselutila Show Layer Indicators Näytä tasojen merkit Insert PDF Push Button Lisää PDF-painike Insert PDF Text Field Lisää PDF-tekstikenttä Insert PDF Check Box Lisää PDF-valintaruutu Insert PDF Combo Box Lisää PDF-alasvetovalikko Insert PDF List Box Lisää PDF-listavalikko Insert Text Annotation Lisää Tekstikenttä Insert Link Annotation Lisää linkki Sticky Tools Työkalut pysyvät päällä &Fit to Height &Sovita korkeuteen Fit to Width Sovita leveyteen Show Bleeds Näytä leikkuuvarat &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Ascii-heittomerkki Straight Double Unicode 0x0022 Ascii-lainausmerkki Single Left Unicode 0x2018 Ylösalainen puolilainausmerkki Single Right Unicode 0x2019 Puolilainausmerkki Double Left Unicode 0x201C Ylösalainen kokolainausmerkki Double Right Unicode 0x201D Kokolainausmerkki Single Reversed Unicode 0x201B Käännetty puolilainausmerkki Double Reversed Unicode 0x201F Käännetty kokolainausmerkki Single Left Guillemet Unicode 0x2039 Vasen kulmapuolilainausmerkki Single Right Guillemet Unicode 0x203A Oikea kulmapuolilainausmerkki Double Left Guillemet Unicode 0x00AB Vasen kulmalainausmerkki Double Right Guillemet Unicode 0x00BB Oikea kulmalainausmerkki Low Single Comma Unicode 0x201A Rivinalinen puolilainausmerkki Low Double Comma Unicode 0x201E Rivinalinen kokolainausmerkki CJK Single Left Unicode 0x300C CJK vasen puolilainausmerkki CJK Single Right Unicode 0x300D CJK oikea puolilainausmerkki CJK Double Left Unicode 0x300E CJK vasen kokolainausmerkki CJK Double Right Unicode 0x300F CJK oikea kokolainausmerkki &400% &200 % {400%?} Insert &Text Frame Lisää &tekstikehys Insert &Image Frame Lisää &kuvakehys Insert T&able Lisää t&aulukko Insert &Shape Lisää k&uvio Insert &Polygon Lisää &monikulmio Insert &Line Lisää &viiva Insert &Bezier Curve Lisää &bezier-viiva Insert &Freehand Line Lisää va&paa viiva Scribus Homepage Scribuksen kotisivu Scribus Online Documentation Scribuksen dokumentaatio verkossa Scribus Wiki Scribus-wiki Getting Started with Scribus Alkuun Scribuksen kanssa Show Context Menu Näytä kontekstivalikko &Manage Images &Kuvien hallinta &About Plugins &Tietoja liitännäisistä Insert Unicode Character Begin Sequence Get Vector File... Hae vektoritiedosto... Advanced Select All... Valitse kaikki.... Edit Source... Muokkaa lähdettä... Replace Colors... Korvaa värit... Rulers Relative to Page Viivaimet suhteessa sivuun Insert &Render Frame Lisää &erikoiskehys Check for Updates Tarkista päivitykset Number of Pages Sivumäärä Adjust Image to Frame Sovita kuva kehykseen Soft &Hyphen Apostrophe Unicode 0x0027 Ascii-heittomerkki Straight Double Unicode 0x0022 Ascii-lainausmerkki Single Left Unicode 0x2018 Ylösalainen puolilainausmerkki Single Right Unicode 0x2019 Puolilainausmerkki Double Left Unicode 0x201C Ylösalainen kokolainausmerkki Double Right Unicode 0x201D Kokolainausmerkki Single Reversed Unicode 0x201B Käännetty puolilainausmerkki Double Reversed Unicode 0x201F Käännetty kokolainausmerkki Single Left Guillemet Unicode 0x2039 Vasen kulmapuolilainausmerkki Single Right Guillemet Unicode 0x203A Oikea kulmapuolilainausmerkki Double Left Guillemet Unicode 0x00AB Vasen kulmalainausmerkki Double Right Guillemet Unicode 0x00BB Oikea kulmalainausmerkki Low Single Comma Unicode 0x201A Rivinalinen puolilainausmerkki Low Double Comma Unicode 0x201E Rivinalinen kokolainausmerkki CJK Single Left Unicode 0x300C CJK vasen puolilainausmerkki CJK Single Right Unicode 0x300D CJK oikea puolilainausmerkki CJK Double Left Unicode 0x300E CJK vasen kokolainausmerkki CJK Double Right Unicode 0x300F CJK oikea kokolainausmerkki File Tiedosto &File &Tiedosto Edit Muokkaa &Edit &Muokkaa Style Tyyli &Style Item &Item Ko&hde Insert I&nsert &Lisää Page &Page &Sivu View &View &Näytä Extras E&xtras &Apuvälineet Windows &Windows &Ikkuna Help &Help &Ohje Plugin Menu Items Others Unicode Characters Move/Resize Value Indicator New &from Template... Uusi &mallista... AdjustCmsDialog CMS Settings CMS-asetukset AlignDistribute Align Tasaa &Selected Guide: &Valittu apuviiva: &Relative To: &Suhteessa: &Align Sides By: ... ... Distribute Jaa &Distance: &Etäisyys: Reverse Distribution Swap AlignDistributePalette Align and Distribute Jaa ja tasaa &Relative to: &Suhteessa: First Selected Ensin valittuun Last Selected Viimeiseksi valittuun Page Sivuun Margins Reunukseen Selection Valintaan &Align Sides By: Moving (Preserve Size) Resizing (Preserve Opposite Side) <qt>When aligning one side of an item:<ul><li>Always move the other side too (preserve existing width and height), or </li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> Align bottoms Tasaa alareunat Align right sides Tasaa oikeat reunat Center on vertical axis Keskitä pystysuoralle akselille Align left sides Tasaa vasemmat reunat Center on horizontal axis Keskitä vaakasuoralle akselille Align tops Tasaa yläreunat Distribute right sides equidistantly Jaa oikeat sivut tasaisesti Distribute bottoms equidistantly Jaa alareunat tasaisesti Distribute centers equidistantly horizontally Jaa keskikohdat tasaiset vaakasuunnassa Distribute left sides equidistantly Jaa vasemmat reunat tasaisesti Distribute centers equidistantly vertically Jaa keskikohdat tasaisesti Distribute tops equidistantly Jaa yläreunat tasaisesti &Distance: &Etäisyys: Distribute the items with the distance specified Jaa kohteet määritellyn etäisyyden perusteella Guide Apuviiva &Selected Guide: &Valittu apuviiva: When distributing by a set distance, reverse the direction of the distribution of items None Selected Ei valittuja Swap items to the left Swap items to the right Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Align right sides of items to left side of anchor Tasaa kohteitten oikeat reunat ankkurin vasemmalle puolelle Align left sides of items to right side of anchor Tasaa kohteitten vasemmat reunat ankkurin oikealle puolelle Align tops of items to bottom of anchor Tasaa kohteitten yläreunat ankkurin alapuolelle Align bottoms of items to top of anchor Tasaa kohteitten alareunat ankkurin yläpuolelle Make horizontal gaps between items equal Tee vaakasuunnan väleistä tasalevyisiä Make horizontal gaps between items equal to the value specified Tee vaakasuunnan väleistä annetun arvon levyisiä Make vertical gaps between items equal Tee pystysuunnan väleistä tasalevyisiä Make vertical gaps between items equal to the value specified Tee pystysuunnan väleistä annetun arvon levyisiä Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal Align Tasaa Distribute Jaa <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to Valitun apuviivan sijainti, johon tasataan AlignSelect Align Text Left Tasaa teksti vasemmalle Align Text Right Tasaa teksti oikealle Align Text Center Keskitä teksti Align Text Justified Tasaa tekstin molemmat reunat Align Text Forced Justified Pakota tekstin molemmat reunat Annot OK OK pt pt sum summa Destination Kohde Date Päivämäärä None Ei mitään Open Avaa Push Paina Star Tähti Text Teksti Thin Ohut Time Aika Wide Leveä Prepend Currency Symbol Sijoita valuuttamerkki eteen Submit Form Lähetä lomake Limit of Yläraja Check Rasti Cross Risti On Focus Kohdistettaessa Go To Siirry Icons Kuvakkeet Inset Upotettu Name: Nimi: Page: Sivu: Other Muu Plain Paljas Solid Kiinteä Type: Tyyppi: List Box Listavalikko Use Currency Symbol Käytä valuuttamerkkiä Number Format Numeron muoto Check Style: Valintatyyli: To File: Tiedostoon: No Print Ei tulosteta Submit to URL: Lähetä URL:iin: Calculate Laske Roll Over Ylivienti Value is not validated Arvoa ei tarkasteta maximum maksimi Formatting Muotoilu Combo Box Alasvetovalikko Custom validate script: Oma tarkastusskripti: minimum minimi Action Toiminta Border Reuna Cancel Peruuta Date Format Päivämäärän muoto Button Painike Circle Ympyrä Color: Väri: Field Properties Kentän ominaisuudet Dashed Katkoviiva Custom Oma Time Format Ajan muoto Event: Tapahtuma: Value is the Arvo on Format Muotoilu Hidden Piilotettu Custom calculation script: Oma laskuskripti: Enter a comma separated list of fields here Anna kenttien nimet pilkuin eroteltuina Custom Scripts Omat skriptit Invert Käännä No View Ei näytetä Normal Normaali Number Numero Remove Poista Square Nelikulmio Style: Tyyli: X-Pos: X: Field is formatted as: Kenttä on muotoiltu: Y-Pos: Y: Width: Leveys: On Blur On Blur Submit Data as HTML Lähetä data HTML:na Text Field Tekstikenttä Options Asetukset Icon Placement... Kuvakkeen sijoittelu... Mouse Up Hiiri ylös Properties Ominaisuudet Pick... Valitse... Mouse Enter Hiiri saapuu Use Icons Käytä kuvakkeita Read Only Vain luku Pressed Painettu product tulo Text for Roll Over Teksti yliviennille Validate Tarkastus Change... Muuta... Percent Format Prosenttimuoto Characters kirjainmerkkiä Password Salasana Visibility: Näkyvyys: average keskiarvo Beveled Viisto Import Data Tuo data Mouse Exit Hiiri poistuu Mouse Down Hiiri alas Script: Skripti: Percentage Prosentti Decimals: Desimaalit: of the following fields: seuraavista kentistä: Import Data from: Tuo data: and less or equal to: ja pienempi tai yhtä suuri kuin: Keystroke: Näppäimenlyönti: Multi-Line Monirivinen Underline Alleviivattu Diamond Timantti Editable Muokattava Appearance Ulkonäkö Check Box Valintaruutu Value is not calculated Arvoa ei lasketa Edit... Muokkaa... Reset Form Palauta lomake Required Pakollinen Do Not Spell Check Älä oikolue Outlined Rajattu äärivoin Visible Näkyvissä Value must be greater than or equal to: Arvon täytyy olla suurempi tai yhtä suuri kuin: Format: Muotoilu: Highlight Korosta Default is Checked Oletusarvona valittu Example: Esimerkki: Do Not Scroll Älä vieritä Text for Button Down Teksti painikkeen ollessa painettuna You need at least the Icon for Normal to use Icons for Buttons Tarvitset ainakin normaalin kuvakkeen käyttääksesi painikkeiden kuvakkeita Selection Change Valinta muuttui Font for use with PDF 1.3: PDF 1.3:n kanssa käytettävä fontti Flag is ignored for PDF 1.3 Merkintä jätetään huomioimatta PDF 1.3 -tiedostomuotoa käytettäessä PDF Files (*.pdf);;All Files (*) PDF-tiedostot (*.pdf);;Kaikki tiedostot (*) JavaScript JavaScript None highlight Ei mitään None action Ei mitään Tooltip: Työkaluvihje: Do Not Export Value Älä vie arvoa Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Kuvat (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;Kaikki tiedostot (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Kuvat (*.tif *.png *.jpg *.xpm);;%1;;Kaikki tiedostot (*) Export absolute Filename Vie absoluuttinen tiedostonimi Submit format: FDF HTML XFDF PDF PDF Annota pt pt Destination Kohde Link Linkki Open Avaa Text Teksti External Web-Link Ulkoinen web-linkki Annotation Properties Kommenttien asetukset External Link Ulkoinen linkki &Type: &Tyyppi: C&hange... &Muuta... &Page: &Sivu: &X-Pos &X &Y-Pos: &Y: %1;;All Files (*) %1;;Kaikki tiedostot (*) Export absolute Filename Vie absoluuttinen tiedostonimi ApplyMasterPageDialog Apply Master Page Käytä mallisivua &Master Page: &Mallisivu: Apply To Käytä Current &page &Nykyiselle sivulle Alt+P Alt+P &Even pages &Parillisille sivuille Alt+E Alt+E O&dd pages P&arittomille sivuille Alt+D Alt+D &All pages &Kaikille sivuille Alt+A Alt+A &Within range &Sivuille Alt+W Alt+W to mihin Alt+O Alt+O Alt+C Alt+C Apply the selected master page to even, odd or all pages within the following range Käytä valittua mallisivua parillisilla, parittomilla tai kaikilla sivuilla Possible Hyphenation Mahdollinen tavutus Apply to Current &Page &Even Pages O&dd Pages &All Pages &Kaikki sivut &Within Range AspellPlugin Spell-checking support Oikolukutuki 0.1 0.1 Spell Checker Oikoluku Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error AspellPluginBase Spell Check Oikoluku Replacement: Korvaava: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. &Add Word Lisää s&ana &Change &Muuta Not in Dictionary: Ei ole sanastossa: Word that was not found in the active dictionary Sana, jota ei löytynyt käytetystä sanastosta Replacement text for the current word that was not found in the dictionary Active Dictionary: Sanasto käytössä: Ignore the current text not found in the active dictionary &Ignore &Ohita Ignore all occurrences of the current text not found in the active dictionary I&gnore All O&hita kaikki Add the current word to the your personal spelling dictionary for future use Lisää sana henkilökohtaiseen sanastoosi Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Muu&ta kaikki Close Sulje AspellPluginImpl Loaded Ladattu default oletus aspell dictionary. aspell-sanasto AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Oikoluku suoritettu Aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in Aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating Aspell speller. Spell Checker Oikoluku No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Nuolet Flow Chart Jigsaw Palapeli Specials Erikoismerkit Default Shapes Oletusmuodot Barcode Scribus frontend for Pure Postscript Barcode Writer Scribus-liitäntä Pure Postscript Barcode -ohjelmaan &Barcode... &Viivakoodi... Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator Error opening file: %1 Virhe avattaessa tiedostoa: %1 Barcode incomplete Viivakoodi ei ole täydellinen 12 or 13 digits 12 tai 13 numeroa 8 digits 8 numeroa 11 or 12 digits 11 tai 12 numeroa 7 or 8 digits 7 tai 8 numeroa 5 digits 5 numeroa 2 digits 2 numeroa Variable number of characters, digits and any of the symbols -. *$/+%. Kirjainmerkkejä, numeroita ja symboleja: -, *, $, /, +, % Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Valinnainen määrä ASCII- ja funktio-merkkejä, aloitus oikealla aloitusmerkillä alkuperäiselle merkkiryhmälle. UCC/EAN-128:lla täytyy olla FNC 1 -merkki heti aloitusmerkin jälkeen Variable number of digits and any of the symbols -$:/.+ABCD. Numeroita ja symboleja: -, $, :, /, +, A, B, C, D Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Numeroita. ITF-14 käsittää 14 merkkiä eikä sisällä tarkastusmerkkiä Variable number of digits Numeroita Variable number of digits and capital letters Numeroita ja versaalikirjaimia Variable number of hexadecimal characters Hex-merkkejä 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Barcode Select Type Valitse tyyppi Select Barcode Type Valitse viivakoodin tyyppi BarcodeGeneratorBase &Type: &Tyyppi: Select one of the available barcode type here Valitse viivakoodityyppi The numeric representation of the code itself. See the help message below Koodin numeerinen esitys. Lisää tietoa ohjeessa alapuolella. Reset the barcode samples Tyhjennä viivakoodiesimerkit &Include text in barcode &Sisällytä teksti viivakoodiin Alt+I Alt+I If checked, there will be numbers in the barcode too Valittuna viivakoodiin sisällytetään myös numerot &Guard whitespace &Varmista tyhjä tila Alt+G Alt+G Draw arrows to be sure of space next the code Piirrä nuolet varmistaaksesi tilan koodin vieressä Colors Värit &Background &Tausta Alt+B Alt+B Background color - under the code lines Koodiviivojen taustan väri &Lines &Viivat Alt+L Alt+L Color of the lines in barcode Viivakoodin viivojen väri &Text &Teksti Alt+T Alt+T Color of the text and numbers Tekstin ja numeroiden väri Hints and help is shown here Ohje ja vihjeet näytetään tässä Preview of the result. 72dpi sample. Viivakoodin esikatselu (72 dpi) Co&de: &Koodi: I&nclude checksum &Näytä tarkastussumma Alt+N Alt+N Generate and include a checksum in barcode Luo ja lisää tarkastussumma viivakoodiin Incl&ude checksum digit &Lisää tarkastussumman numero Alt+U Alt+U Include the checksum digit in the barcode text Sisällytä tarkastussumman numero viivakoodin tekstiin Insert Barcode Lisää viivakoodi Format Muotoilu Incl&ude Checksum Digit I&nclude Checksum &Guard Whitespace &Include Text in Barcode Biblio Delete Poista Object Kohde Scrapbook Leikekirja New Entry Uusi leike Rename Nimeä uudelleen &Name: &Nimi: Name "%1" is not unique. Please choose another. Nimi "%1" on jo olemassa. Valitse toinen nimi. Choose a Scrapbook Directory Valitse leikekirjahakemisto Choose a Directory Valitse hakemisto Choose a scrapbook file to import Valitse leikekirjatiedosto Main Oletus Copied Items Kopioidut kohteet Copy To: Kopioi: Move To: Siirrä: Create a new scrapbook page Luo uusi leikekirjan sivu Load an existing scrapbook Lataa leikekirja Save the selected scrapbook Tallenna valittu leikekirja Import a scrapbook file from Scribus <=1.3.2 Import an scrapbook file from Scribus <=1.3.2 Tuo Scribus <= 1.3.2 -leikekirjatiedosto Close the selected scrapbook Sulje valittu leikekirja New Name Uusi nimi Hide Directorys Hide Images Hide Vector files Open Directorys in a new tab Scrapbook (*.scs *.SCS) Leikekirja (*.scs *.SCS) Paste to Page Liitä sivulle Save as... Tallenna nimellä... Close Sulje Delete Contents Poista sisältö Do you really want to delete all entries? Haluatko poistaa kaikki? Go up one Directory Configure the scrapbook BookPalette Bookmarks Kirjanmerkit ButtonIcon OK OK Icon Kuvake Never Ei koskaan Reset Palauta alkuperäiseen muotoon Caption overlays Icon Teksti kuvakkeen päällä Scale How: Miten skaalataan: Layout: Asettelu: Caption only Ainoastaan teksti Caption below Icon Teksti kuvakkeen alapuolella Always Aina Cancel Peruuta Scale: Skaalaa: Icon only Ainoastaan kuvake When Icon is too small Kun kuvake on liian pieni Caption left to Icon Teksti kuvakkeen vasemmalla puolella Caption right to Icon Teksti kuvakkeen oikealla puolella When Icon is too big Kun kuvake on liian suuri Non Proportional Ei tasasuhtainen Proportional Tasasuhtainen Icon Placement Kuvakkeen sijoittelu Caption above Icon Teksti kuvakkeen yläpuolella CMSPrefs Absolute Colorimetric Absolute Colorimetric Perceptual Perceptual Monitor profiles can only be changed when no documents are currently opened. Relative Colorimetric Relative Colorimetric Saturation Saturaation CMSPrefsBase Form Lomake &Activate Color Management Käytä &värien hallintaa System Profiles Järjestelmän profiilit &RGB Images: &RGB-kuvat: Default color profile for imported RGB images Oletusväriprofiili tuoduille RGB-kuville &CMYK Images: &CMYK-kuvat: Default color profile for imported CMYK images Oletusväriprofiili tuoduille CMYK-kuville &RGB Solid Colors: &RGB-värit: Default color profile for solid RGB colors on the page Oletusprofiili sivun RGB-väreille &CMYK Solid Colors: &CMYK-värit Default color profile for solid CMYK colors on the page Oletusprofiili sivun CMYK-väreille Document Options Simulate printer on Screen Monitor Profile &Monitor: &Näyttö: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Itse tekemäsi tai näyttösi valmistajan toimittama väriprofiili. Profiilin tulee olla näytöllesi tarkoitettu ei yleinen väriprofiili kuten sRGB. P&rinter: Tu&lostin: Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Tulostimesi valmistajan toimittama väriprofiili tulostimellesi. Profiilin tulee olla tulostimellesi tarkoitettu ei yleinen väriprofiili kuten sRGB. Rendering Intents Sovitustavat Images: Kuvat: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Oletuksena käytetty sovitustapa kuville. Relative Colorimetric tai Perceptual tulisi valita, ellet tiedä haluavasi jotain muuta. Sol&id Colors: V&ärit: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Oletuksena käytetty sovitustapa tasaisille väreille. Relative Colorimetric tai Perceptual tulisi valita, ellet tiedä haluavasi jotain toista. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Mahdollistaa tulosteen värien jäljittelyn näytöllä perustuen käytettävään väriprofiiliin. Sim&ulate Printer on the Screen &Jäljittele tulostinta näytöllä Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Jäljittele värihallittua ympäristöä. Kaikki värit, rgb tai cmyk, muunnetaan tulostimen väriavaruuteen. Convert all colors to printer space Muunna kaikki värit tulostimen väriavaruuteen Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Toiminto näyttää värit, jotka saattavat tulostua väärin. Toiminnon käyttö vaatii tarkat profiilit ja se tulee huomioida ainoastaan varoituksena. Mark Colors out of &Gamut &Merkkaa asteikon ulkopuoliset värit Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Tumman pään tasaus on keino parantaa kuvien kontrastia. On suositeltavaa että valitsen tämän, jos asiakirjasi sisältää kuvia. Document Rendering Intents Use &Blackpoint Compensation Käytä &Tumman pään tasausta (BPC) CMYKChoose B: B: C: C: G: G: K: K: M: M: R: R: Y: Y: New Uusi Old Vanha RGB RGB CMYK CMYK Web Safe RGB Web-yhteensopiva RGB Edit Color Muokkaa värejä Static Color Bars Staattiset väripalkit Dynamic Color Bars Dynaamiset väripalkit % % &Name: &Nimi: Color &Model &Värimalli Is Spot Color On lisäväri Scribus Swatches User Swatches You cannot create a color named "%1". It is a reserved name for transparent color Nimi "%1" on varattu läpinäkyvyydelle. Sitä ei voi käyttää. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. Valitsemalla tämä väristä tehdään lisäväri (spot color), jolloin painoprosessiin lisätään uusi laatta tai erottelu kutakin lisäväriä varten. Lisävärejä käytetään useimmiten, kun esimerkiksi logon väri halutaan saada juuri oikeaksi eikä sitä voida esittää CMYK-musteilla. Metalli- ja hohtovärit ovat esimerkiksi tällaisia värejä. The name of the color already exists, please choose another one. Valitsemasi nimi värille on jo käytössä. Valitse toinen nimi. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name Väriä ei voi luoda ilman nimeä. Anna sille nimi. HSV Color Map HSV-värikartta CWDialog Merging colors Lisätään värejä Error: Virhe: Color %1 exists already! Väri %1 on jo olemassa Color %1 appended. Väri %1 lisättiin. Now opening the color manager. Avataan värien hallinta. Color Merging Värien lisäys Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Haluttua väriä ei löydy. Olet luultavasti valinnut mustan, harmaan tai valkoisen. Tätä väriä ei voida prosessoida. Color Wheel Väripyörä Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors Tulosväri CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Valitsemasi värimallin värit Color Scheme Method Värimallin Angle: Kulma: Difference between the selected value and the counted ones. Refer to documentation for more information. Erotus valitun arvon ja laskettujen välillä. Lisää tietoa löytyy dokumentaatiosta. Select one of the methods to create a color scheme. Refer to documentation for more information. Valitse jokin tyyli luoda väriteema. Lisää tietoa löytyy dokumentaatiosta. Merge created colors into the document colors Lisää luodut värit asiakirjan väreihin &Merge &Yhdistä Alt+M Alt+M Replace created colors in the document colors Korvaa luodut värit asiakirjan väreissä &Replace &Korvaa Alt+R Alt+R Leave colors untouched Älä tee muutoksia väreihin &Cancel &Peruuta Alt+C Alt+C Preview: Esikatselu: Sample color scheme. Simulate common vision defects here. Select type of the defect. Mallinna yleisiä näön rajoituksia. Valitse rajoituksen tyyppi. Vision Defect Type: Näkörajoitteisuuden tyyppi C: C: % % M: M: Y: Y: K: K: RGB: RGB: HSV: HSV: R: R: G: G: B: B: CMYK: CMYK: H: H: S: S: V: V: Document Asiakirja Canvas X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 Width: %1 Height: %2 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. Valittua väriä ei löydy asiakirjan väreistä. Valitse nimi uudelle värille. Color Not Found Väriä ei löydy The name you have selected already exists. Please enter a different name for this new color. Valitsemasi nimi on jo olemassa. Valitse uusi nimi värille. CanvasMode_Normal All Supported Formats Kaikki tuetut tiedostotyypit Open Avaa CgmPlug Importing: %1 Tuodaan: %1 Analyzing File: Tutkitaan tiedostoa: Group%1 Ryhmä%1 Generating Items Luodaan kohteita CharSelect Font: Fontti: Character Class: Merkkiluokka: &Insert &Lisää C&lear &Tyhjennä Insert the characters at the cursor in the text Lisää merkit kursorin kohdalle tekstiin Delete the current selection(s). Poista valinta. Full Character Set Kaikki merkit Basic Latin Latinalainen perusosa Latin-1 Supplement Latin-1-täydennys Latin Extended-A Latin laajennusosa A Latin Extended-B Latin laajennusosa B General Punctuation Yleiset välimerkit Super- and Subscripts Ylä- ja alaindeksit Currency Symbols Valuuttamerkit Letterlike Symbols Kirjainsymbolit Number Forms Lukuilmaisuja Arrows Nuolet Mathematical Operators Matemaattiset operaattorit Box Drawing Viivapiirrosmerkit Block Elements Lohko-osat Geometric Shapes Geometriset muodot Miscellaneous Symbols Sekalaiset symbolit Dingbats Dingbats Small Form Variants Pienikokoisia muunnelmia Ligatures Ligatuurit Specials Erikoismerkit Greek Kreikkalaiset merkit Greek Extended Kreikkalaiset merkit (laajennus) Cyrillic Kyrilliset merkit Cyrillic Supplement Kyrilliset merkit (laajennus) Arabic Arabialaiset merkit Arabic Extended A Arabialaiset merkit laajennus A Arabic Extended B Arabialaiset merkit laajennus B Hebrew Heprealaiset merkit Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Valitse avattavan tiedoston nimi Error Virhe Error reading file %1 - file is corrupted propably. Cannot write file %1 Tiedostoa %1 ei voi kirjoittaa {1?} Character Palette Merkkipaletti Empty the Palette? Tyhjennä paletti? You will remove all characters from this palette. Are you sure? Haluatko poistaa kaikki merkit tästä paletista? Hide/Show Enhanced Palette Näytä tai piilota paletin lisäominaisuudet Save Quick Character Palette Tallenna merkkipaletti CharSelectEnhanced Full Character Set Kaikki merkit Basic Latin Latinalainen perusosa Latin-1 Supplement Latin-1-täydennys Latin Extended-A Latin laajennusosa A Latin Extended-B Latin laajennusosa B General Punctuation Yleiset välimerkit Super- and Subscripts Ylä- ja alaindeksit Currency Symbols Valuuttamerkit Letterlike Symbols Kirjainsymbolit Number Forms Lukuilmaisuja Arrows Nuolet Mathematical Operators Matemaattiset operaattorit Box Drawing Viivapiirrosmerkit Block Elements Lohko-osat Geometric Shapes Geometriset muodot Miscellaneous Symbols Sekalaiset symbolit Dingbats Dingbats Small Form Variants Pienikokoisia muunnelmia Ligatures Ligatuurit Specials Erikoismerkit Greek Greek Extended Kreikkalaiset merkit (laajennus) Cyrillic Kyrilliset merkit Cyrillic Supplement Kyrilliset merkit (laajennus) Arabic Arabic Extended A Arabialaiset merkit laajennus A Arabic Extended B Arabialaiset merkit laajennus B Hebrew Heprealaiset merkit Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text Lisää merkit kursorin kohdalle tekstiin &Insert &Lisää Delete the current selection(s). Poista valinta. C&lear Type in a four digit Unicode value directly here CharStyleComboBox No Style Ei tyyliä CharTableView Delete Poista CheckDocument Glyphs missing Puuttuvat merkit Text overflow Teksti ylivuotaa Object is not on a Page Kohde ei ole sivulla Missing Image Puuttuva kuva Object has transparency Kohteessa on käytetty läpinäkyvyyttä Object is a PDF Annotation or Field Kohde on PDF-merkintä tai -kenttä Object is a placed PDF Kohde on sijoitettu PDF Document Asiakirja No Problems found Ongelmia ei löytynyt Page Sivu Free Objects Vapaat kohteet Problems found Ongelmia löytyi Preflight Verifier Tarkastustyökalu Items Kohteet Problems Ongelmat Current Profile: Valittu profiili: &Ignore Errors Ohita virheet OK OK Transparency used Läpinäkyvyyttä on käytetty Blendmode used Sekoitustiloja on käytetty Print/Visible Mismatch Layer "%1" Taso "1" Check again Tarkasta uudelleen Image resolution below %1 DPI, currently %2 x %3 DPI Kuvan resoluutio on alle %1 DPI, tällä hetkellä %2x%3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Kuvan resoluutio on yli %1 DPI, tällä hetkellä %2x%3 DPI Image is GIF Kuva on GIF Annotation uses a non TrueType font Merkinnässä on käytetty muuta kuin Truetype-fonttia Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame Tyhjennä kuvakehys Layers Tasot Issue(s): %1 Master Pages Mallisivut Layer Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI CollectForOutput Choose a Directory Valitse hakemisto Cannot create directory: %1 Collecting... Kerätään... Cannot collect all files for output for file: %1 Ei pysty keräämään kaikkia tiedostoja:\n %1 Cannot collect the file: %1 Ei voi kerätä tiedostoa:\n %1 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... Kerätään... Cannot collect all files for output for file: %1 Ei pysty keräämään kaikkia tiedostoja:\n %1 Cannot collect the file: %1 Ei voi kerätä tiedostoa:\n %1 ColorListBox Sort by Name Lajittele nimen mukaan Sort by Color Sort by Type ColorManager Colors Värit &Import T&uo &New &Uusi &Edit &Muokkaa D&uplicate &Kopioi &Delete &Poista &Remove Unused Poista &käyttämättömät Color Sets Värisarjat Current Color Set: Nykyinen värisarja: &Save Color Set Tallenna &värisarja Choose a color set to load Valitse ladattava värisarja Save the current color set Tallenna nykyinen värisarja Remove unused colors from current document's color set Poista käyttämättömät värit asiakirjan värisarjasta Import colors to the current set from an existing document Tuo värejä nykyiseen kokoelmaan asiakirjasta Create a new color within the current set Luo uusi väri nykyiseen värisarjaan Edit the currently selected color Muokkaa valittua väriä Make a copy of the currently selected color Kopioi valittu väri Delete the currently selected color Poista valittu väri Make the current colorset the default color set Tee valitusta värisarjasta oletussarja &Name: &Nimi: Choose a Name Valitse nimi Copy of %1 Kopio-%1 New Color Uusi väri Information Tiedot Import Colors Tuo värejä ColorWheel Monochromatic Monokromaattinen Analogous Analoginen Complementary Komplementaarinen Split Complementary Jaettu komplimentaarinen Triadic Triadinen Tetradic (Double Complementary) Tetradic (tuplakomplementaarinen) Base Color Perusväri Monochromatic Light Monokromaattinen vaalea Monochromatic Dark Monokromaattinen tumma 1st. Analogous 1. analoginen 2nd. Analogous 2. analoginen 1st. Split 1. jaettu 2nd. Split 2. jaettu 3rd. Split 3. jaettu 4th. Split 4. jaettu 1st. Triadic 1. Triadinen 2nd. Triadic 2. Triadinen 1st. Tetradic (base opposite) 1. Tetradic (perus vastakohta) 2nd. Tetradic (angle) 2. Tetradic (kulma) 3rd. Tetradic (angle opposite) 3. Tetradic (kulma vastakohta) ColorWheelPlugin &Color Wheel... &Väripyörä... Color setting helper Väriasetusavustaja Color selector with color theory included. Värivalitsin väriteorialla CommonStrings &Apply &Käytä &Cancel &Peruuta &OK &OK &Save &Tallenna Warning Varoitus Custom CommonStrings, custom page size Oma Single Page Yksittäinen sivu Double Sided Aukeama 3-Fold Kolme sivua 4-Fold Neljä sivua None color name Ei mitään Monday Maanantai Tuesday Tiistai Wednesday Keskiviikko Thursday Torstai Friday Perjantai Saturday Lauantai Sunday Sunnuntai January Tammikuu February Helmikuu March Maaliskuu April Huhtikuu May Toukokuu June Kesäkuu July Heinäkuu August Elokuu September Syyskuu October Lokakuu November Marraskuu December Joulukuu Yes Kyllä No Ei &Yes &Yes &No &Ei Left Page Left page location Vasen sivu Middle Middle page location Keskimmäinen Middle Left Middle Left page location Keskimmäinen vasen Middle Right Middle Right page location Keskimmäinen oikea Right Page Right page location Oikea sivu Normal Default single master page Oletus Normal Left Default left master page Normaali vasen Normal Middle Default middle master page Normaali keski Normal Right Default right master page Normaali oikea Normal Vision Color Blindness - Normal Vision Normaali näkö Protanopia (Red) Color Blindness - Red Color Blind Punasokeus Deuteranopia (Green) Color Blindness - Greed Color Blind Vihersokeus Tritanopia (Blue) Color Blindness - Blue Color Blind Sinisokeus Full Color Blindness Color Blindness - Full Color Blindness Täysi värisokeus Custom: Custom Tab Fill Option Oma: None Ei mitään Solid Line Yhtenäinen viiva Dashed Line Katkoviiva Dotted Line Pisteviiva Dash Dot Line Viiva-piste-viiva Dash Dot Dot Line Viiva-piste-piste-viiva None Optical Margin Setting Ei mitään Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Oletus Min. Word Tracking Pienin sanaväli Max. Word Tracking Suurin sanaväli Min. Glyph Extension Pienin merkin leveyden muutos Max. Glyph Extension Suurin merkin leveyden muutos RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Harmaasävy Duotone Colorspace Kaksiväri Unknown Colorspace (Unknown) Tuntematon PostScript PostScript Text Frame Tekstikehys Image Frame Kuvakehys Line Viiva Polygon Monikulmio Polyline Kulmikas viiva Text on a Path Teksti polulla Multiple Multiple frame types Kerroin PDF Push Button PDF-painike PDF Text Field PDF-tekstikenttä PDF Check Box PDF-valintaruutu PDF Combo Box PDF-pudotusvalikko PDF List Box PDF-listakenttä PDF Text Annotation PDF-teksti PDF Link Annotation PDF-linkki PostScript Level 1 PostScript taso 1 PostScript Level 2 PostScript taso 2 PostScript Level 3 PostScript taso 3 Windows GDI Windows GDI Render Frame Erikoiskehys Default Paragraph Style Oletuskappaletyyli Default Character Style Oletusmerkkityyli Default Line Style Oletusviivatyyli Multiple Multiple frame types Kerroin PDF 3D Annotation Symbol Left Page Left page location Vasen sivu Middle Middle page location Keskimmäinen Middle Left Middle Left page location Keskimmäinen vasen Middle Right Middle Right page location Keskimmäinen oikea Right Page Right page location Oikea sivu Normal Left Default left master page Normaali vasen Normal Middle Default middle master page Normaali keski Normal Right Default right master page Normaali oikea RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Harmaasävy Duotone Colorspace Kaksiväri Unknown Colorspace (Unknown) Tuntematon Normal Vision Color Blindness - Normal Vision Normaali näkö Protanopia (Red) Color Blindness - Red Color Blind Punasokeus Deuteranopia (Green) Color Blindness - Greed Color Blind Vihersokeus Tritanopia (Blue) Color Blindness - Blue Color Blind Sinisokeus Full Color Blindness Color Blindness - Full Color Blindness Täysi värisokeus Custom: Custom Tab Fill Option Oma: None Optical Margin Setting Ei mitään ContextMenu Preview Settings Esikatseluasetukset Paste File... Liitä tiedosto... Delete Page Poista sivu Paste Image from Clipboard CopyPageToMasterPageBase Convert Page to Master Page Muunna sivu mallisivuksi Name: Nimi: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Uusi mallisivu %1 Cpalette % % Radial Gradient Säteittäinen väriliuku Horizontal Gradient Vaakasuora väriliuku Normal Tasainen Opacity: Läpinäkyvyys: Vertical Gradient Pystyväriliuku Cross Diagonal Gradient Viisto väriliuku 2 Diagonal Gradient Viisto väriliuku 1 Shade: Sävy: Edit Line Color Properties Muokkaa viivan väriä Edit Fill Color Properties Muokkaa täyttöväriä Saturation of color Värin kylläisyys Normal or gradient fill method Normaali täyttö tai väriliuku Set the transparency for the color selected Aseta valitun värin läpinäkyvyys Free linear Gradient Vapaa lineaarinen väriliuku pt pt Free radial Gradient Vapaa säteittäinen väriliuku Move Vector Siirrä vektoria Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Siirrä liukuvärin alkuvektoria hiiren vasen painike painettuna ja loppuvektoria oikea painike painettuna Transparency Settings Läpinäkyvyyden asetukset Offsets Siirtymät X: X: Y: Y: Scaling Koon muutos X-Scale: Koon muutos X Y-Scale: Koon muutos Y Rotation Kierto Angle Kulma Pattern Kuviointi Blend Mode: Sekoitustila: Darken Tummenna Lighten Vaalenna Multiply Kerroin Screen Rasterointi Overlay Sulautus Hard Light Kova valo Soft Light Pehmeä valo Difference Erotus Exclusion Poisto Color Dodge Valotus Color Burn Varjostus Hue Sävy Saturation Saturaatio Color Väri Luminosity Kirkkaus Display only used Colors Näytä ainoastaan käytetyt värit Custom Oma Create Mesh CreateRange Create Range Luo sivuväli Number of Pages in Document: Asiakirjan sivujen lukumäärä Doc Page Range Sivuväli asiakirjassa Basic Range Selection Perusasetukset välille Range of Pages Sivuväli De&lete P&oista Alt+L Alt+L Move &Down Siirrä &alas Alt+D Alt+D Move &Up Siirrä &ylös Alt+U Alt+U Add a Range of Pages Lisää sivuväli Consecutive Pages Peräkkäisiä sivuja Even Pages Parilliset sivut From: Mistä: To: Minne: &Add To Range &Lisää joukkoon Alt+A Alt+A Odd Pages Parittomat sivut Comma Separated List Pilkuin eroteltu lista Advanced Reordering Muut asettelut Page Order Sivujärjestys Sample Page Order: Esimerkkijärjestys: Page Group Size: Sivuryhmän koko: &OK &OK Alt+O Alt+O &Cancel &Peruuta Alt+C Alt+C CsvDialog CSV Importer Options CSV-tuojan ominaisuudet Field delimiter: Kentän erotin: (TAB) (SARKAIN) Value delimiter: Arvon erotin: First row is a header Ensimmäinen rivi on otsikko OK OK Cancel Peruuta None delimiter Ei mitään CupsOptions Even Pages only Vain parilliset sivut Value Arvo Page per Sheet Sivu arkille Landscape Vaakasuora Mirror Peili Option Asetus Orientation Suunta Printer Options Tulostimen asetukset Odd Pages only Vain parittomat sivut Portrait Pystysuora Page Set Sivukokonaisuus Pages per Sheet Sivua arkille N-Up Printing Tulosta useita sivuja arkille All Pages Kaikki sivut This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * Tämä paneeli näyttää CUPS-asetukset tulostettaessa. Näytettävät ominaisuudet riippuvat tulostimesi ajurista. CUPS-tuen voi varmistaa menemällä kohtaan Ohje>Tietoja Scribuksesta ja tarkastamalla kirjastotuki merkeistä C-C-T; C=CUPS, C=LittleCMS ja T=TIFF. Puuttuva tuki on merkitty * -merkillä. CurveWidget Open Avaa Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Tallenna nimellä Cannot write the file: %1 Tiedostoon ei voi kirjoittaa: %1 Inverts the curve Kääntää käyrän Resets the curve Palauttaa käyrän Switches between linear and cubic interpolation of the curve Loads a curve Lataa käyrän Saves this curve Tallentaa käyrän CustomFDialog Encoding: Koodaus: &Compress File &Pakkaa tiedosto &Include Fonts &Sisällytä fontit Show Preview Näytä esikatselu &Include Color Profiles S&isällytä väriprofiilit Show a preview and information for the selected file Compress the Scribus document on save Pakkaa Scribus-dokumentti tallennettaessa Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CvgPlug Importing: %1 Tuodaan: %1 Analyzing File: Tutkitaan tiedostoa: Group%1 Ryhmä%1 Generating Items Luodaan kohteita DashEditor Value: Arvo: Offset: Siirtymä: DeferredTask Cancelled by user Käyttäjän peruuttama DelColor Delete Color Poista väri Delete Color: Poista väri: Replace With: Korvaa värillä: DelPages to: minne: Delete Pages Poista sivut Delete From: Mistä poistetaan: DialogsAPI Alert - Scribus DocIm Importing failed Tuonti epäonnistui Importing Word document failed %1 Word-asiakirjan tuonti epäonnistui \n %1 DocInfos Document Information Asiakirjan tiedot &Title: O&tsikko: &Author: &Tekijä: &Subject: &Keywords: A&vainsanat: Descri&ption: Kuvau&s: P&ublisher: &Julkaisija: &Contributors: Av&ustajat: Dat&e: &Päivämäärä: T&ype: &Tyyppi: F&ormat: &Muoto: Identi&fier: &Tunniste: &Source: L&ähde: &Language: &Kieli: &Relation: &Suhde: Co&verage: &Kattavuus: Ri&ghts: O&ikeudet: Further &Information &Lisätiedot A person or organisation responsible for making the document available Henkilö tai järjestö, joka on vastuussa asiakirjan jakelusta A person or organisation responsible for making contributions to the content of the document Henkilö tai järjestö, joka on avustanut asiakirjan sisällön luonnissa A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 Päivämäärä, joka on yhteydessä asiakirjan elinkaareen. VVVV-KK-PP ISO 9601 The nature or genre of the content of the document, eg. categories, functions, genres, etc Asiakirjan lajityyppi tai luonne. Esimerkiksi: kategoriat, käyttötarkoitukset An unambiguous reference to the document within a given context such as ISBN or URI Yksiselitteinen tunniste asiakirjaan kuten ISBN tai URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI Viittaus yhteenkuuluvaan asiakirjaan mahdollisesti käyttäen yksiselitteistä tunnistetta kuten ISBN tai URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Asiakirjan sisällön laajuus sisältäen mahdollisesti paikan, ajan ja lainsäädölliset asiat Information about rights held in and over the document, eg. copyright, patent or trademark Tietoa oikeuksista jotka liittyvät asiakirjaan, esimerkiksi tekijänoikeus, patentti tai tavaramerkki A reference to a document from which the present document is derived, eg. ISBN or URI Viittaus asiakirjaan josta nykyinen asiakirja on johdettu, esim. SBN tai URI Documen&t &Asiakirja The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Henkilö tai järjestö, joka on vastuussa asiakirjan sisällöstä. Tämä kenttä voidaan upottaa Scribus-asiakirjaan sekä PDF-metadataksi. A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Asiakirjan nimi. Tämä kenttä voidaan upottaa Scribus-asiakirjaan sekä PDF-metadataksi. An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export Selostus asiakirjan sisällöstä. Tämä kenttä voidaan upottaa Scribus-asiakirjaan sekä PDF-metadataksi. The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files Aihe, jota asiakirjan sisältö käsittelee. Tämä kenttä on avainsanoja varten, jotka haluat upottaa PDF-tiedostoon avustamaan arkistointia ja etsimistä. The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here Asiakirjan fyysinen tai digitaalinen olemus. Koko ja tyyppi on hyvä mainita. RFC2045, RFC2046 MIME-tyypeille saattaa olla hyödyllinen tässä. The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH Asiakirjan sisällön kieli. Yleensä käytetään standardissa ISO-639 määriteltyjä kieliä laajennettuna standardissa ISO-3166 määritellyllä maakoodilla esim. fi-FI, en-GB. DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Lisää sivunumeroinnin osa asiakirjaan. Uusi osa lisätään tällä hetkellä valittuna olevan osan jälkeen. Delete the currently selected section. Poista tällä hetkellä valittuna oleva osa. 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Page Number Out Of Bounds Sivunumero sallitun alueen ulkopuolella The value you have entered is outside the range of page numbers in the current document (%1-%2). Antamasi sivunumero on asiakirjan sallittujen arvojen ulkopuolella (%1-%2). <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. b>Nimi:</b> Nimi alueelle<br/> <b>Shown:</b> Näytä sivunumero alueella, jos yksi tai useampi tekstikehys sisältää sivunumerot<br/> <b>Alku:</b> Alueen ensimmäinen sivu<br/> <b>Loppu:</b> Alueen viimeinen sivu<br/> <b>Tyyli:</b> Käytettävä sivunumeron tyyli.<br/> <b>Aloitus:</b> Alueen ensimmäisen sivun numero. Jos Aloitus on "2" ja valittu numerotyyli on "a,b,c,...", alkaa sivunumerot merkistä "b". Document Sections Asiakirjan osat &Add &Lisää Alt+A Alt+A &Delete P&oista Alt+D Alt+D Name Nimi Shown Näytä From Mistä To Minne Style Tyyli Start Aloitus DocumentItemAttributes Relates To Suhteessa Is Parent Of On vanhempi Is Child Of On lapsi Text Frames Tekstikehykset Image Frames Kuvakehykset Boolean boolean Integer kokonaisluku String merkkijono Real Number reaaliluku None relationship Ei mitään None auto add Ei mitään None types Ei mitään Document Item Attributes Kohteen muuttujat &Add &Lisää Alt+A Alt+A &Copy &Kopioi Alt+C Alt+C &Delete P&oista Alt+D Alt+D C&lear T&yhjennä Alt+L Alt+L Name Nimi Type Tyyppi Value Arvo Parameter Parametri Relationship Suhde Relationship To Suhteessa Auto Add To Lisää automaattisesti DrwPlug Group%1 Ryhmä%1 Importing: %1 Tuodaan: %1 Analyzing File: Tutkitaan tiedostoa: Generating Items Luodaan kohteita EPSPlug Importing File: %1 failed! Tiedoston %1 tuonti epäonnistui Fatal Error Vakava virhe Error Virhe Generating Items Luodaan kohteita Analyzing PostScript: Analysoidaan Postscript-tiedostoa Converting of %1 images failed! Kuvan %1 tuominen epäonnistui Group%1 Ryhmä%1 Importing: %1 Tuodaan: %1 EditToolBar Edit Muokkaa Editor Editor Editori &New Uu&si &Open... &Avaa... Save &As... Tallenna &nimellä... &Save and Exit Tallenna ja &poistu &Exit without Saving P&oistu tallentamatta &Undo &Kumoa &Redo Tee &uudelleen Cu&t &Leikkaa &Copy &Kopioi &Paste L&iitä C&lear T&yhjennä &Get Field Names &Hae kenttien nimet &File &Tiedosto &Edit &Muokkaa JavaScripts (*.js);;All Files (*) JavaScript-tiedostot (*.js);;Kaikki tiedostot (*) Ctrl+N Ctrl+N Ctrl+Z Ctrl+Z Ctrl+X Ctrl+X Ctrl+C Ctrl+C Ctrl-V Ctrl-V EffectsDialog Image Effects Kuvan muokkaus Options: Asetukset: Color: Väri: Shade: Sävy: Brightness: Kirkkaus: Contrast: &Kontrasti: Radius: Säde: Value: Arvo: Posterize: Porrasta: Available Effects Saatavilla olevat tehosteet Blur Heikennä terävyyttä Brightness Kirkkaus Colorize Väritä Contrast Kontrasti Grayscale Harmaasävy Invert Käänteinen Posterize Porrasta Sharpen Terävöitä >> >> << << Effects in use Käytössä olevat tehosteet OK OK Cancel Peruuta Color 1: Väri 1: Color 2: Väri 2: Color 3: Väri 3: Color 4: Väri 4: Duotone Kaksiväri Tritone Kolmeväri Quadtone Neliväri Curves Käyrät ExceptHookDialog Script error Skriptivirhe An exception occured while running the script. &Close &Sulje Exception &Details >> ExportBitmap File exists. Overwrite? Tiedosto on jo olemassa. Ylikirjoitetaanko? exists already. Overwrite? on jo olemassa. Ylikirjoitetaanko? Save as Image Tallenna kuvana Insufficient memory for this image size. Muisti ei riitä tälle kuvakoolle Error writing the output file(s). Virhe kirjoitettaessa kohdetiedostoa. ExportForm &All pages &Kaikki sivut Change the output directory Muuta kohdehakemistoa Available export formats Käytettävät tiedostotyypit Choose a Export Directory Valitse Kohdehakemisto The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Kohdehakemisto, jonne kuvat tallennetaan. Vietyjen tiedostojen nimet ovat muotoa asiakirjan_nimi-sivunumero.tiedostotyyppi Export only the current page Vie ainoastaan nykyinen sivu C&hange... &Muuta... &Export to Directory: &Vie hakemistoon: Image &Type: Kuvan &Tyyppi: &Quality: &Laatu: Export as Image(s) Vie kuvana Options Asetukset &Resolution: Ta&rkkuus: % % dpi dpi Range Väli &Current page &Nykyinen sivu &Range &Alue Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Syötä pilkuin eroteltu lista, jossa * merkitsee kaikkia sivuja ja 1-5 sivuväliä. Voit myös syöttää yksittäisen sivunumeron. Resolution of the Images Use 72 dpi for Images intended for the Screen Kuvien resoluutio. 72 dpi on hyvä valinta kuville, joita on tarkoitus katsella näytöltä Export a range of pages Vie valikoima sivuja Export all pages Vie kaikki sivut &Size: &Koko: Size of the images. 100% for no changes, 200% for two times larger etc. Kuvien koko, 100 % ei muutosta, 200 % kaksi kertaa suurempi jne. Image size in Pixels Kuvan koko pikseleinä TextLabel Tekstimerkintä The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Automaattinen ExtImageProps Extended Image Properties Kuvan ominaisuudet Normal Normaali Darken Tummenna Lighten Vaalenna Hue Sävy Saturation Kylläisyys Color Väri Luminosity Kirkkaus Multiply Kerroin Screen Rasterointi Dissolve Häivytä Overlay Sulautus Hard Light Kova valo Soft Light Pehmeä valo Difference Erotus Exclusion Poisto Color Dodge Valotus Color Burn Varjostus Blend Mode: Sekoitustila: Opacity: Läpinäkyvyys: % % Name Nimi Layers Tasot Don't use any Path Älä käytä polkuja Paths Hakemistot Live Preview FDialogPreview Size: Koko: No Title Ei otsikkoa Title: Otsikko: Author: Tekijä: Unknown Tuntematon Scribus Document Scribus asiakirja Resolution: Tarkkuus: DPI DPI Colorspace: Väriavaruus: File Format: Tiedostomuoto FileLoader Some fonts used by this document have been substituted: Jotkin asiakirjan fontit vaihdettiin: was replaced by: korvattiin tyypillä: FileToolBar File Tiedosto FontComboH Face: Fontti: Family: Style: Tyyli: Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Font Name Fontin nimi Use Font Käytä fonttia Family Perhe Style Tyyli Variant Muunnos Type Tyyppi Format Muotoilu Embed in PostScript Sijoita PostScript-tiedostoon Subset Osajoukko Access Löytyi Used in Doc Käytetty dokumentissa Path to Font File Polku fonttitiedostoon Unknown font type Tuntematon Unknown font format Tuntematon User font preview Käyttäjä System font preview Järjestelmä Click to change the value Napsauta muuttaaksesi Unknown font type Tuntematon Unknown font format Tuntematon User font preview Käyttäjä System font preview Järjestelmä FontPrefs Font Name Fontin nimi Font Substitutions Korvaavat fontit Replacement Korvaava Choose a Directory Valitse hakemisto Additional Paths Lisätyt polut Available Fonts Mahdolliset fontit &Available Fonts L&öydetyt fontit Font &Substitutions &Korvaavat fontit Additional &Paths Lisätyt p&olut &Delete P&oista C&hange... &Muuta... A&dd... &Lisää... &Remove Po&ista FontPrefsTab Available Fonts Mahdolliset fontit Font Substitutions Korvaavat fontit Additional Paths Lisätyt polut &Available Fonts L&öydetyt fontit Font Name Fontin nimi Replacement Korvaava &Delete Font &Substitutions &Korvaavat fontit C&hange... &Muuta... A&dd... &Lisää... &Remove Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Additional &Paths Lisätyt p&olut Choose a Directory Valitse hakemisto FontPreview Size of the selected font Valitun fontin koko Leave preview font preview Poistu esikatselusta Woven silk pyjamas exchanged for blue quartz font preview Törkylempijä vongahdus on suomenkielinen pangram Fonts Preview Fonttien esikatselu &Quick Search: &Pikahaku &Font Size: &Fontin koko: Text Teksti Sample text to display Näytettävä esimerkkiteksti Se&t &Käytä Alt+T Alt+T Reset the text Palauta teksti &Close &Sulje Alt+C Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default &Oletus Show Extended Font Information Set the preview text Aseta esikatseluteksti FontPreviewPlugin &Font Preview... &Fonttien esikatselu... Font Preview dialog Fonttien esikatselun dialogi Sorting, searching and browsing available fonts. Järjestä, etsi ja selaa saatavilla olevia fontteja FontReplaceDialog Font Substitution Korvaa fontti Original Font Alkuperäinen fontti Substitution Font Korvaava fontti Make these substitutions permanent Tee korvauksista pysyviä This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Asiakirja sisältää fontteja, joita ei löydy järjestelmästäsi. Valitse ne korvaavat fontit. Peruuttaminen lopettaa asiakirjan latauksen. Cancels these font substitutions and stops loading the document. Peruuta fonttien korvaus ja keskeytä asiakirjan lataaminen. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. Jos käytät tätä Scribus korvaa kaikissa asiakirjoissa nämä fontit valinnoillasi. Fonttien korvaavuuksia voi myöhemmin säätää valikon kohdassa Muokkaa->Asetukset->Fontit. If you select OK, then save, these substitutions are made permanent in the document. Jos valitset OK ja tallennat nämä korvaukset jäävät asiakirjaan pysyvästi. FontSelect Select Alternate Font Font Fontti GradientEditor Position: Sijainti: % % Add, change or remove color stops here Lisää, muuta tai poista värirajoja tässä GradientEditorBase Frame Position: Sijainti: % % Color: Väri: Opacity: Shade: Sävy: GradientPreview Add Stop Remove Stop GradientVectorBase Gradient Vector Liukuvärin vektori Start: Alku: / End: Loppu: Skew: Focal: Scale: Skaalaa: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape GradientVectorDialog Gradient Vector Liukuvärin vektori GuideManager &Single &Yksi Horizontals Vaakasuorat &Add &Lisää Alt+A Alt+A D&elete D&elete Alt+E Alt+E Verticals Pystysuorat A&dd A&dd Alt+D Alt+D De&lete P&oista Alt+L Alt+L &Lock Guides &Lock Guides Appl&y to All Pages Kä&ytä kaikkiin sivuihin Alt+Y Alt+Y &Column/Row &Rivi tai sarake &Number: &Numero: U&se Gap: &Väli: Alt+S Alt+S Refer To Suhteessa &Page &Sivu Alt+P Alt+P M&argins &Reunuksiin S&election &Valintaan Nu&mber: Nu&mero: Use &Gap: V&äli: Alt+G Alt+G &Misc &Muut Delete all guides from the current page Poista kaikki apuviivat nykyiseltä sivulta Delete Guides from Current &Page &Poista apuviivat sivulta Delete all guides from the current document Poista kaikki asiakirjan apuviivat Delete Guides from &All Pages Poista &apuviivat kaikilta sivuilta Guide Manager Apuviivojen hallinta Add a new horizontal guide Lisää vaakasuora apuviiva Delete the selected horizontal guide Poista valittu vaakasuora apuviiva Add a new vertical guide Lisää pystysuora apuviiva Delete the selected vertical guide Poista valittu pystysuora apuviiva Lock the guides Lukitse apuviivat Apply to all pages Käytä kaikkiin sivuihin Number of horizontal guides to create Luotavien vaakasuorien apuviivojen lukumäärä Number of vertical guides to create Luotavien pystysuorien apuviivojen lukumäärä Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Poista kaikki näkyvät apuviivat nykyiseltä sivulta Delete all guides from all pages Poista kaikki apuviivat kaikilta sivuilta Refer to HelpBrowser Scribus Online Help Scribus ohje verkossa &Contents &Sisältö &Search &Etsi Find Etsi Search Term: Hakusana: Se&arch &Etsi &New &Uusi &Delete &Poista Book&marks &Kirjanmerkit &Print... T&ulosta... New Bookmark Uusi kirjanmerkki New Bookmark's Title: Kirjanmerkin otsikko: &File &Tiedosto &Find... &Etsi... Find &Next Etsi &seuraava Find &Previous Etsi &edellinen &Edit &Muokkaa Navigation Loading Failed &Add Bookmark &Lisää kirjanmerkki D&elete All &Poista kaikki &Bookmarks &Kirjanmerkit Scribus Help Scribus-ohje Searching is case insensitive Haku on aakkoslajiherkkä 1 1 &Exit &Poistu Find &Next... Etsi &seuraava... Find &Previous... Etsi &edellinen... &Add &Lisää &Quit &Lopeta <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowserNavigation Form Lomake &Contents &Sisältö Se&arch &Etsi Searching is case insensitive Haku on aakkoslajiherkkä &Search &Etsi 1 1 Book&marks &Kirjanmerkit &New &Delete D&elete All &Poista kaikki HyAsk Skip Ohita Accept Hyväksy Cancel Peruuta Possible Hyphenation Mahdollinen tavutus Add to the Exception List Lisää poikkeuslistaan Add to the Ignore List Lisää ohitettaviin HySettings Ignore List Ohitettavat Add a new Entry Lisää uusi Edit Entry Muokkaa Exception List Poikkeuslista ImageInfoDialog Image Info Kuvan tiedot General Info Yleiset tiedot Date / Time: Päivämäärä/aika: Has Embedded Profile: Upotettu profiili: Profile Name: Profiilin nimi: Has Embedded Paths: Upotettuja polkuja: Has Layers: Tasoja: EXIF Info EXIF info Artist: Kuvaaja: Comment: Kommentti: User Comment: Käyttäjän kommentti: Camera Model: Kameran malli: Camera Manufacturer: Kameran valmistaja: Description: Kuvaus: Copyright: Copyright: Scanner Model: Skannerin malli: Scanner Manufacturer: Skannerin valmistaja: Exposure time Valotusaika Aperture: Aukko: ISO equiv.: ISO-vastaavuus: ImportAIPlugin Import AI... Tuo AI... Imports Illustrator Files Tuo Illustrator-tiedostoja Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported Tiedostoa ei voitu tuoda ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats Kaikki tuetut tiedostotyypit ImportPSPlugin Import PostScript... Tuo Postscript... Imports PostScript Files Tuo Postscript-tiedostoja Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit ImportXfigPlugin Import Xfig... Tuo Xfig... Imports Xfig Files Tuo Xfig-tiedostoja Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats Kaikki tuetut tiedostotyypit Imposition Portrait Pystysuora Landscape Vaakasuora ImpositionBase Imposition Asemointi Gri&d Ruu&dukko Copies Kopioita Do&uble sided Alt+U Alt+U Front side Back side &Booklet &Vihko Pages per sheet Sivuja arkille 4 4 8 8 16 16 Pages Sivut <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Taitos Front page from Double sided Kaksipuolinen Back page from Destination page Kohdesivu Size Koko Orientation Suunta Width Leveys Height Korkeus Preview Esikatselu Refresh preview Päivitä esikatselu &OK &OK Alt+G Alt+G &Cancel &Peruuta Alt+C Alt+C ImpositionPlugin &Imposition... Asemo&inti... Imposition dialog Asemointi-ikkuna Imposition on grids, booklets and folds Asemointi ruudukkoon, vihkoiksi ja taitoksiksi InsPage at End Loppuun before Page Ennen sivua Insert Page Lisää sivu after Page Jälkeen sivun Page(s) sivu(a) &Insert &Lisää &Master Page: &Mallisivu: Master Pages Mallisivut Page Size Sivun koko &Size: &Koko: Orie&ntation: &Suunta: Portrait Pystysuora Landscape Vaakasuora &Width: &Leveys: &Height: &Korkeus: Move Objects with their Page Siirrä kohteet sivun mukana InsertAFrame Open Avaa Insert A Frame Lisää kehys T&ype T&yyppi &Text Frame &Tekstikehys &Image Frame &Kuvakehys &Location &Sijainti Page Placement Sivujen asettelu Current Page Nykyinen sivu All Pages Kaikki sivut ... ... Position of Frame Kehyksen sijainti Top Left of Margins Vasen yläkulma reunuksista Top Left of Page Sivun vasen yläkulma Top Left of Bleed X: X: Y: Y: &Size &Koko Same as the Page Margins Sama kuin sivun reunusten Same as the Page Sivun koko Same as the Bleed Same as the Imported Image Height: Korkeus: Width: Leveys: &Options &Asetukset Source Image: Kuva: There are no options for this type of frame Tälle kehystyypille ei ole asetuksia Columns: Sarakkeet: Gap: Väli: Source Document: Asiakirja: Range of Pages Sivuväli Custom Position Muu sijainti Custom Size Muu koko <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Lisää yksi tai useampi tekstikehys Insert one or more image frames Lisää yksi tai useampi kuvakehys Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Lisää kehys ainoastaan nykyiselle sivulle Insert one frame for each existing page Lisää yksi kehys jokaiselle sivulle Insert frames on a range of pages Lisää kehys joukolle sivuja Range of pages to insert frames on Sivujoukko, jolle kehykset lisätään Position the new frame in relation to the page Sijoita kehys suhteessa sivuun Insert the frame at the top left of the page margins Sijoita kehys reunusten leikkauspisteeseen ylävasemmalla Insert the frame at the top left of the page Sijoita kehys sivun ylävasempaan kulmaan Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Kehyksen leveys Height of the inserted frame Kehyksen korkeus Number of columns for the inserted text frame Tekstikehyksen palstojen lukumäärä Distance between the columns in the text frame Palstojen väli Link the inserted text frames together to form a chain of frames Linkitä lisättävät kehykset toisiinsa Link Inserted Frames Linkitä kehykset Link the first inserted frame to a preexisting text frame Linkitä lisättävä kehys olemassa olevaan tekstikehykseen Link to Existing Frame Linkitä olemassa olevaan kehykseen Name of existing text frame to link to Olemassa olevan kehyksen nimi Source document to load into the text frame Lähdedokumentti, joka ladataan kehykseen Source image to load into the inserted image frame Kuva, joka ladataan lisättävään kehykseen InsertTable Insert Table Lisää taulukko Number of rows: Rivien lukumäärä: Number of columns: Palstojen lukumäärä: JavaDocs New Script Uusi skripti Edit JavaScripts Muokkaa javaskriptejä &Edit... &Muokkaa... &Add... &Lisää... &Delete &Poista &Close &Sulje &New Script: &Uusi skripti: Do you really want to delete this script? Haluatko poistaa tämän skriptin? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. Lisää uuden skriptin, määrittelee funktion samalla nimellä. Jos haluat käyttää tätä skriptiä avaustoimintaskriptinä älä muuta funktion nimeä. LatexEditor Enter Code: Anna tunnus: Update Päivitä Revert Käännä Program Messages: Ohjelmaviestit Status: Unknown Tila: tuntematon Kill Program Tapa ohjelma Options Asetukset Resolution: Tarkkuus: Automatic Automaattinen DPI DPI Program: Ohjelma: Use Preamble Status: Tila: Error Virhe Finished Päättynyt Running Ajossa No item selected! Ei kohdetta valittuna Insert symbol Lisää symboli Editor Editori Information Tiedot An editor for this frame is already running! Muokkain kehykselle on jo ajossa Editor running! Muokkain ajossa Please specify an editor in the preferences! Valitse muokkain asetuksissa Could not create a temporary file to run the external editor! Run External Editor... Aja ulkoinen muokkain... Running the editor failed with exitcode %d! Running the editor "%1" failed! Run external editor... Aja ulkoinen muokkain... Insert Symbol LayerPalette Delete Layer Poista taso Layers Tasot Do you want to delete all objects on this layer too? Haluatko myös poistaa kaikki kohteet tältä tasolta? Name Nimi Add a new layer Uusi taso Delete layer Poista taso Raise layer Nosta tasoa Lower layer Laske tasoa Opacity: Peittävyys: % % Blend Mode: Sekoitustila: Normal Normaali Darken Tummenna Lighten Vaalenna Multiply Kerroin Screen Rasterointi Overlay Sulautus Hard Light Kova valo Soft Light Pehmeä valo Difference Erotus Exclusion Poisto Color Dodge Valotus Color Burn Varjostus Hue Sävy Saturation Saturaatio Color Väri Luminosity Kirkkaus Duplicates the current layer Monistaa nykyisen tason Make Layer Visible - Uncheck to hide the layer from the display Näytä taso. Valinnan poistaminen piilottaa tason näytöltä Print Layer - Uncheck to disable printing. Tulosta taso. Valinnan poistaminen estää tason tulostamisen. Lock or Unlock Layer - Unchecked is unlocked Lukitse taso. Valinnan poistaminen vapauttaa tason. Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer Duplicate the Current Layer Raise Layer Lower Layer Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Name of the Layer - Double click on the name of a layer to edit the name LegacyMode Open Avaa All Supported Formats Kaikki tuetut tiedostotyypit LensDialogBase Optical Lens + + - - Lens Parameters Linssin parametrit Add a new lens Lisää linssi &Add Lens &Lisää linssi Remove selected lens Poista valittu linssi &Remove Lens &Poista linssi Zoom In Lähennä Zoom Out Loitonna &X Pos: &X-sijainti: Horizontal position of the lens Linssin vaakasuunnan sijainti &Y Pos: &Y-sijainti: Vertical position of the lens Linssin pystysuunnan sijainti The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Sä&de: Radius of the lens Linssin säde &Strength: Voimakkuu&s: Strength of the lens Linssin voimakkuus LensEffectsPlugin Lens Effects... Linssin tehosteet... Path Tools Polkutyökalut Lens Effects Linssin tehosteet Apply fancy lens effects Käytä linssin tehosteita LoadSavePlugin All Files (*) Kaikki tiedostot (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found LoremManager Select Lorem Ipsum Valitse Lorem Ipsum Author: Tekijä: Get More: Hae lisää: XML File: XML-tiedosto: Lorem Ipsum Lorem Ipsum Paragraphs: Kappaleet: Alt+O Alt+O Alt+C Alt+C Standard Lorem Ipsum Lorem Ipsum Random Paragraphs Satunnaisia kappaleita Number of paragraphs of selected sample text to insert Valitun esimerkkitekstin kappaleiden lukumäärä List of languages available to insert sample text in Luettelo esimerkkitekstin kielistä MarginDialog Margin Guides Reunaviivat Manage Page Properties Hallitse sivun ominaisuuksia Page Size Sivun koko &Size: &Koko: Orie&ntation: &Suunta: Portrait Pystysuora Landscape Vaakasuora &Width: &Leveys: &Height: &Korkeus: Move Objects with their Page Siirrä kohteet sivun mukana Type: Tyyppi: Other Settings Muut asetukset Master Page: Mallisivu: Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Uusien sivujen suunta Width of the page(s) to be inserted Uusien sivujen leveys Height of the page(s) to be inserted Uusien sivujen korkeus When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget &Bottom: &Alhaalla: &Top: &Ylhäällä: &Right: &Oikealla: &Left: &Vasemmalla: Distance between the top margin guide and the edge of the page Paperin reunan ja yläreunuksen välinen etäisyys Distance between the bottom margin guide and the edge of the page Paperin reunan ja alareunuksen välinen etäisyys &Inside: &Sisäpuolella: O&utside: &Ulkopuolella: Preset Layouts: Valmiit asettelut: Apply the margin changes to all existing pages in the document Käytä reunusten muutoksia asiakirjan kaikkiin sivuihin. Printer Margins... Tulostimen reunukset... Import the margins for the selected page size from the available printers. Tuo reunukset valitulle sivukoolle asennetuista tulostimista Apply settings to: Käytä asetuksia: All Document Pages Kaikkiin asiakirjan sivuihin All Master Pages Kaikille mallisivuille Apply the margin changes to all existing master pages in the document Margin Guides Reunukset Top: Yläreuna: Bottom: Alareuna: Distance for bleed from the top of the physical page Etäisyys leikkausvaralle sivun todellisesta yläreunasta Distance for bleed from the bottom of the physical page Etäisyys leikkausvaralle sivun todellista alareunasta Distance for bleed from the left of the physical page Etäisyys leikkausvaralle sivun todellisesta vasemmasta reunasta Distance for bleed from the right of the physical page Etäisyys leikkausvaralle sivun todellisesta oikeasta reunasta Bleeds Leikkausvarat Inside: Sisäreuna: Outside: Ulkoreuna: Left: Vasen reuna: Right: Oikea: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages Muokkaa mallisivuja Do you really want to delete this master page? Haluatko poistaa tämän mallisivun? &Name: &Nimi: New Master Page Uusi mallisivu Name: Nimi: New MasterPage Uusi mallisivu Copy #%1 of Kopio #%1/ Duplicate the selected master page Kopioi valittu mallisivu Delete the selected master page Poista valittu mallisivu Add a new master page Lisää uusi mallisivu Import master pages from another document Tuo mallisivuja toisesta asiakirjasta New Master Page %1 Uusi mallisivu %1 Unable to Rename Master Page Mallisivua ei voitu nimetä uudelleen The Normal page is not allowed to be renamed. Normaali oletusmallisivua ei voi nimetä uudelleen Rename Master Page Nimeä mallisivu uudelleen New Name: Uusi nimi: Copy #%1 of %2 This master page is used at least once in the document. Do you really want to delete master page "%1"? Measurements ° MeasurementsBase Distances Etäisyydet X1: X1: 10000.0000 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: Pituus: DX: DX: DY: DY: Angle: Kulma: Unit: MergeDoc Open Avaa Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Asiakirjat (*.sla *.sla.gz *.scd *.scd.gz);;Kaikki tiedostot (*) Import Page(s) Tuo sivu(ja) from 0 / 0 Create Page(s) Luo sivu(t) from %1 / %1 Import Master Page Tuo mallisivu &From Document: &Asiakirjasta: Chan&ge... &Muuta... &Import Page(s): &Tuo sivuja: &Import Master Page &Tuo mallisivu Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Anna pilkuin eroteltu lista. Listan elementti voi olla yksittäinen sivunumero, * joka tarkoittaa kaikkia sivuja tai sivualue alku- ja loppusivu eroteltuna merkillä - (esim. 1-5). Before Page Ennen sivua After Page Jälkeen sivun At End Loppuun &Import T&uo &Select... MeshDistortionDialog + + - - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Lähennä Zoom Out Loitonna Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset &Palauta MeshDistortionPlugin Mesh Distortion... Path Tools Polkutyökalut Mesh Distortion of Polygons MissingFont Missing Font Puuttuva fontti The Font %1 is not installed. Fonttia %1 ei ole asennettu. Use Käytä instead sijasta ModeToolBar Tools Työkalut Angle: Kulma: Width: Leveys: Properties... Ominaisuudet... MovePages Move Page(s): Siirrä sivu(t): Move Pages Siirrä sivut Copy Page Kopioi sivu Move Page(s) Siirrä sivuja Before Page Ennen sivua After Page Jälkeen sivun At End Loppuun To: Minne: Number of copies: Kopioiden lukumäärä: Number of Copies: MultiProgressDialog Progress Edistyminen Overall Progress: Kokonaisedistyminen: &Cancel &Peruuta %v of %m MultipleDuplicate &Horizontal Shift: &Vaakasuora siirtymä: &Vertical Shift: P&ystysuora siirtymä: &Horizontal Gap: &Vaakaväli: &Vertical Gap: Pysty&väli: Multiple Duplicate Useita kopioita &By Number of Copies &Number of Copies: &Kopioiden lukumäärä: &Shift Created Items By Alt+S Alt+S Create &Gap Between Items Of Alt+G Alt+G Rotation: Kierto: By &Rows && Columns Vertical Gap: Pystysuunnan etäisyys: Horizontal Gap: Vaakasuunnan etäisyys: Number of Rows: Rivien määrä: Number of Columns: Sarakkeitten määrä: &OK &OK &Cancel &Peruuta MyPlugin My &Plugin &Oma liitännäinen MyPluginImpl Scribus - My Plugin Scribus - Oma liitännäinen The plugin worked! Liitännäinen toimi NewDoc New Document Uusi asiakirja Landscape Vaakasuora Options Asetukset Portrait Pystysuora Margin Guides Sivun reunukset Document page size, either a standard size or a custom size Asiakirjan sivun koko. Standardi tai itse määrittämäsi koko Orientation of the document's pages Asiakirjan sivujen suunta Width of the document's pages, editable if you have chosen a custom page size Asiakirjan sivujen leveys. Muokattavissa, jos valitset kooksi "Oma" Height of the document's pages, editable if you have chosen a custom page size Asiakirjan sivujen korkeus. Muokattavissa jos valitset kooksi "Oma" Default unit of measurement for document editing Asiakirjan muokkauksessa käytettävä mittayksikkö Create text frames automatically when new pages are added Luo tekstikehykset automaattisesti uusia sivuja lisättäessä Distance between automatically created columns Automaattisesti luotujen tekstikehysten palstojen väli New from Template Open Existing Document Open Recent Document Number of columns to create in automatically created text frames Automaattisesti luotujen tekstikehysten palstojen lukumäärä &Size: &Koko: &Width: &Leveys: &Height: Ko&rkeus: &Automatic Text Frames A&utomaattiset tekstikehykset &Gap: &Väli: Colu&mns: Pal&stoja: Orie&ntation: Suu&nta: &Default Unit: Ol&etusyksikkö: Do not show this dialog again Älä näytä tätä ikkunaa uudestaan Initial number of pages of the document Asiakirjan sivujen lukumäärä N&umber of Pages: &Sivujen lukumäärä: Open Avaa &New Document &Uusi asiakirja Open &Existing Document &Avaa asiakirja Open Recent &Document Avaa &viimeaikainen asiakirja First Page is: Ensimmäinen sivu on: Show Document Settings After Creation Document Layout Dokumentin asettelu New &from Template NewFromTemplatePlugin New &from Template... Uusi &mallista... Load documents with predefined layout Lataa asiakirja esimääritetyllä asettelulla Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). Aloita asiakirja mallista. NewMarginWidget Form Lomake Preset Layouts: Valmiit asettelut: Left: Vasen reuna: Right: Top: Yläreuna: Bottom: Alareuna: Link Linkki Printer Margins... Tulostimen reunukset... Distance between the top margin guide and the edge of the page Paperin reunan ja yläreunuksen välinen etäisyys Distance between the bottom margin guide and the edge of the page Paperin reunan ja alareunuksen välinen etäisyys Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: &Sisäpuolella: &Left: O&utside: &Ulkopuolella: &Right: NodePalette Nodes Solmut Reset this Control Point Palauta tämä hallintapiste Delete Nodes Poista solmu Add Nodes Lisää solmu Move Nodes Siirrä solmuja Move Control Points Siirrä hallintapisteitä Reset Control Points Palauta hallintapisteet &Absolute Coordinates &Absoluuttiset koordinaatit &X-Pos: &X: &Y-Pos: &Y: Edit &Contour Line Muokkaa &reunusta &Reset Contour Line &Palauta reunus &End Editing &Lopeta muokkaus Move Control Points Independently Siirrä hallintapisteitä itsenäisesti Move Control Points Symmetrical Siirrä hallintapisteitä symmetrisesti Open a Polygon or Cuts a Bezier Curve Avaa monikulmio tai katkaise Bezier-viiva Close this Bezier Curve Sulje tämä Bezier-viiva Mirror the Path Horizontally Peilaa polku pystysuunnassa Mirror the Path Vertically Peilaa polku vaakasuunnassa Shear the Path Horizontally to the Left Taivuta polkua vasemmalle Shear the Path Vertically Up Taivuta polkua ylöspäin Shear the Path Vertically Down Taivuta polkua alaspäin Rotate the Path Counter-Clockwise Kierrä polkua vastapäivään Rotate the Path Clockwise Kierrä polkua myötäpäivään Enlarge the Size of the Path by shown % Suurenna polun kokoa Angle of Rotation Kierron kulma Activate Contour Line Editing Mode Muokkaa tekstin kierron reunusta Reset the Contour Line to the Original Shape of the Frame Palauta tekstin kierron reunus alkuperäiseen muotoonsa Shear the Path Horizontally to the Right Taivuta polkua oikealle % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Koordinaatit ovat suhteessa sivuun, muuten suhteessa objektiin. Shrink the Size of the Path by shown % Pienennä koko annetulla prosenttimäärällä Reduce the Size of the Path by the shown value Pienennä kokoa annetulla arvolla Enlarge the Size of the Path by the shown value Suurenna kokoa annetulla arvolla % to Enlarge or Shrink By Koon muutoksen prosenttimäärä Value to Enlarge or Shrink By Koon muutoksen arvo Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas piirtoalueeseen to Page sivuun Set Shape to Image Clip Set the Shape to the Clipping Path of the Image OODPlug This document does not seem to be an OpenOffice Draw file. Valittu asiakirja ei ole OpenOffice Draw -tiedosto. Group%1 Ryhmä%1 OODrawImportPlugin Import &OpenOffice.org Draw... Tuo &OpenOffice.org Draw -piirros... Imports OpenOffice.org Draw Files Tuo OpenOffice.org Draw -tiedostoja Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Tuo OpenOffice.org Draw -tiedoston asiakirjaan. Vektorigrafiikka muutetaan Scribus-objekteiksi. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features Tiedosto sisältää ominaisuuksia, joita ei tueta The file could not be imported Tiedostoa ei voitu tuoda OSGEditor 3D Properties Load Model ... Clear Model Views Name: Nimi: Options Asetukset Solid Kiinteä Solid Wireframe Transparent Transparent Wireframe Wireframe Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: % % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None Ei mitään Headlamp White Day Night Hard Primary Blue Red Cube CAD Artwork Field of Vision Angle: Kulma: Add View... Remove View OSGEditorDialog Default Oletus Add a new View Name: Nimi: New View All Supported Formats (%1);;All Files (*) Import 3-D Model OdtDialog Use document name as a prefix for paragraph styles Käytä asiakirjan nimeä kappaletyylin edessä Do not ask again Älä kysy uudestaan OK OK OpenDocument Importer Options OpenDocument-tuojan asetukset Enabling this will overwrite existing styles in the current Scribus document Ylikirjoita olemassa olevat kappaletyylit Merge Paragraph Styles Yhdistä kappaletyylit Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Yhdistää kappaletyylit tyylien asetusten perusteella. Tuloksena on vähemmän kappaletyylejä. Prepend the document name to the paragraph style name in Scribus. Käytä tuotavan asiakirjan nimeä kappaletyylin nimessä. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Aseta tämänhetkiset valinnat oletusarvoiksi äläkä kysy asetuksia uudestaan tuotaessa OASIS OpenDocument-tiedostosta. Overwrite Paragraph Styles Korvaa kappaletyylit Cancel Peruuta OldScribusFormat Scribus Document Scribus-asiakirja Scribus 1.2.x Document Scribus 1.2.x -asiakirja OneClick Basepoint Size Koko Width: Leveys: Length: Pituus: Height: Korkeus: Angle: Kulma: Remember Values Muista arvot OpenPalette empty palette OpenPaletteModel Elements Visible Näkyvissä OutlinePalette Element Osa Name "%1" isn't unique.<br/>Please choose another. Nimi %1 on jo käytössä.<br/>Ole hyvä ja valitse toinen. Group Ryhmä Page Sivu Free Objects Vapaat kohteet Outline Rakenne Enter a keyword or regular expression to filter the outline. Ctrl+f Filter the Outline using a keyword Ctrl+f Filter: Suodin: Ctrl+F Filter the Outline using a keyword OutlineValues % % Linewidth Viivan leveys PDFExportDialog Save as PDF Tallenna PDF-tiedostoon O&utput to File: &Tulosta tiedostoon: Cha&nge... &Muuta... Output one file for eac&h page &Vie yksi sivu per tiedosto Open PDF after Export &Save &Tallenna Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. Save as Tallenna nimellä PDF Files (*.pdf);;All Files (*) PDF-tiedostot (*.pdf);;Kaikki tiedostot (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. Tallentaa jokaisen sivun omaan PDF-tiedostoon. Sivunumerot lisätään automaattisesti. Tämä saattaa helpottaa sivujen asemointia. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. Tallenna-painike ei ole käytössä, jos yrität tallentaa PDF/X-3 -muodossa ja infotekstiä ei ole annettu PDF/X-3 -välilehdellä. %1 does not exists and will be created, continue? Cannot create directory: %1 Hakemistoa ei voi luoda:\n %1 Save As Tallenna nimellä PDFLibCore Saving PDF PDF-tallennus Exporting Master Page: Viedään mallisivu: Exporting Page: Viedään sivua: Exporting Items on Current Page: Viedään kohteita sivulta: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: Sivu: Date: Päivämäärä: Failed to load an image : %1 Kuvan lataus epäonnistui %1 Failed to write an image : %1 Kuvan tallennus epäonnistui %1 Failed to load an image mask : %1 Kuvan maskin lataus epäonnistui %1 Insufficient memory for processing an image Muistin määrä ei riitä kuvan työstöön A write error occurred, please check available disk space PDFToolBar PDF Tools PDF-työkalut PPreview All Kaikki Print Preview Tulostuksen esikatselu Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Mahdollistaa asiakirjan läpinäkyvyyden näyttämisen. Vaatii Ghostscript 7.07:n tai uudemman version Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Esikatselu jäljittelee CMYK musteita RGB-värien sijaan Enable/disable the C (Cyan) ink plate Näytä/Älä näytä C (syaani) muste Enable/disable the M (Magenta) ink plate Näytä/Älä näytä M (magenta) muste Enable/disable the Y (Yellow) ink plate Näytä/Älä näytä Y (keltainen) muste Enable/disable the K (Black) ink plate Näytä/Älä näytä K (musta) muste Display Trans&parency Näytä &läpinäkyvyys &Display CMYK Näytä &CMYK &C &C &M &M &Y &Y &K &K &Under Color Removal &Alivärin poisto (UCR) Separation Name Osavärin nimi Cyan Syaani Magenta Magenta Yellow Keltainen Black Musta Preview Settings Esikatseluasetukset Scaling: Skaalaus: Close Sulje Print... Tulosta... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Tapa vaihtaa C, Y ja M värien tekemä harmaa mustalla tehdyksi. UCR vaikuttaa kuvien kohdissa, jotka ovat neutraaleja tai lähellä harmaata olevia tummia värejä. UCR:n käyttäminen saattaa parantaa joidenkin kuvien tulostamista. UCR parantaa kykyä välttää värien liikakylläisyyttä CMY-musteilla. Parhaan tuloksen saavuttamiseksi tarvitaan tapauskohtaista testausta. UCR vähentää ylikylläisyyden vaaraa CMY-musteilla. Resize the scale of the page. Muuta sivun kokoa. File Tiedosto Enable &Antialiasing Käytä reun&anpehmennystä Display Settings Näytön asetukset Print Settings Tulostuksen asetukset Mirror Page(s) Horizontal Peilaa sivut vaakasuunnassa Mirror Page(s) Vertical Peilaa sivut pystysuunnassa Clip to Page Margins Leikkaa sivun reunuksiin Print in Grayscale Harmaasävytulostus Convert Spot Colors Muunna lisävärit Fit to Width Sovita leveyteen Fit to Height Sovita korkeuteen Fit to Page Sovita sivulle Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Mahdollistaa lisävärien muuntamisen prosessiväreiksi. Jos et aio painaa käyttäen lisävärejä, tämä on paras jättää valituksi. Apply Color Profiles Käytä väriprofiileja Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins Display Ink Coverage Threshold: % % None Ei mitään PSLib Processing Master Page: Käsitellään mallisivua: Exporting Page: Viedään sivua: Failed to write data for an image Failed to load an image : %1 Kuvan lataus epäonnistui %1 Failed to load an image mask : %1 Kuvan maskin lataus epäonnistui %1 Insufficient memory for processing an image Muistin määrä ei riitä kuvan työstöön PageItem Image Kuva Text Teksti Line Viiva Polygon Monikulmio Polyline Kulmikas viiva PathText Teksti polulla Symbol Copy of Kopio PageItemAttributes Relates To Suhteessa Is Parent Of On vanhempi Is Child Of On lapsi None relationship Ei mitään &Add &Lisää Alt+A Alt+A &Copy &Kopioi Alt+C Alt+C &Delete P&oista Alt+D Alt+D C&lear &Tyhjennä Alt+L Alt+L &OK &OK &Cancel &Peruuta Name Nimi Type Tyyppi Value Arvo Parameter Parametri Relationship Suhde Relationship To Suhteessa Attributes Muuttujat PageItem_ImageFrame Preview Settings Esikatseluasetukset Image Kuva Embedded Image File: Original PPI: Actual PPI: Size: Koko: Colorspace: Väriavaruus: Unknown Tuntematon Page: Sivu: Pages: Sivut: Embedded Image missing missing No Image Loaded PageItem_LatexFrame Error Virhe Running the external application failed! Ohjelman ajo epäonnistui Could not create a temporary file to run the application! Information Tiedot Running the application "%1" failed! Ohjelman %1 ajo epäonnistui Running Suoritetaan The application "%1" failed to start! Ohjelma %1 ei käynnistynyt The application "%1" crashed! Ohjelma %1 kaatui Application Ohjelma DPI DPI State Tila Finished Päättynyt Render Piirtää This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? The config file didn't specify a executable path! The application "%1" failed to start! Please check the path: Render Frame Erikoiskehys No configuration defined to run the application! No application defined Rendering... Render Error PageItem_OSGFrame OSG Default Oletus 3D Model File: PageItem_PathText Paragraphs: Kappaleet: Lines: Viivat: Words: Sanat: Chars: Merkit: PageItem_TextFrame Linked Text Linkitetty teksti Text Frame Tekstikehys Paragraphs: Kappaleet: Lines: Viivat: Words: Sanat: Chars: Merkit: PageLayouts First Page is: Ensimmäinen sivu on: Document Layout Dokumentin asettelu Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Arrange Pages Sivujen hallinta Available Master Pages: Käytössä olevat mallisivut: Document Pages: Asiakirjan sivut: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. This master page is used at least once in the document. Do you really want to delete this master page? Haluatko poistaa tämän mallisivun? PageSelector %1 of %2 %1/%2 Go to the first page Go to the previous page Go to the next page Go to the last page Select the current page of %1 number of pages in document PaintManagerBase Manage Paints <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> <tr> <td style="border: none;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</p></td></tr></table></body></html> 1 1 Import colors to the current set from an existing document Tuo värejä nykyiseen kokoelmaan asiakirjasta &Import Create a new color within the current set Luo uusi väri nykyiseen värisarjaan Add Edit the currently selected color Muokkaa valittua väriä &Edit &Muokkaa Make a copy of the currently selected color Kopioi valittu väri D&uplicate &Kopioi Delete the currently selected color Poista valittu väri &Delete Remove unused colors from current document's color set Poista käyttämättömät värit asiakirjan värisarjasta &Remove Unused Poista &käyttämättömät Color Sets Värisarjat Current Color Set: Nykyinen värisarja: ... ... Save the current color set Tallenna nykyinen värisarja &Save Color Set Tallenna &värisarja Make the current colorset the default color set Tee valitusta värisarjasta oletussarja OK OK Cancel Peruuta PaintManagerDialog Solid Colors Gradients Scribus Swatches User Swatches Merge Color Set Sort by Name Lajittele nimen mukaan Sort by Color Sort by Type New Gradient New Color Uusi väri Copy of %1 Kopio-%1 Selected Colors Do you really want to clear all your gradients? Do you really want to clear all your colors and gradients? All Supported Formats Kaikki tuetut tiedostotyypit Scribus Gradient Files "*.sgr" (*.sgr *.SGR);; Gimp Gradient Files "*.ggr" (*.ggr *.GGR);; All Files (*) Kaikki tiedostot (*) Open Avaa All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors Tuo värejä Information Tiedot The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. &Name: &Nimi: Choose a Name Valitse nimi ParaStyleComboBox No Style Ei tyyliä PathAlongPathPlugin Path Along Path... Polku polulla... Bends a Polygon along a Path. Path Tools Polkutyökalut Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Starting Point End Point a straight Line Points moving Preview on Canvas Connect First Line with Second Line by using: PathConnectPlugin Connect Paths Connects two Paths. Path Tools Polkutyökalut Connect 2 Polylines. PathCutPlugin Cut Polygon Cuts a Polygon with a Path. Path Tools Polkutyökalut Cuts a Polygon by a Polyline Qt Version too old Liian vanha Qt This plugin requires at least version 4.3.3 of the Qt library Error Virhe The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Polku polulla Effect Type Tehostetyyppi Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 90° 180° 180° 270° 270° PathFinderBase Boolean Path Operations Boolen operaatiot poluille + + = = Operation Operaatio ... ... Swap Shapes Options Asetukset First source shape. Second source shape. The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Stroke: Fill: Keep a copy of the original item after applying the operation Keep Subtracts the second shape from the first shape Exchange the Source Shapes The resulting shape uses the color of the first source shape First Shape The resulting shape uses the color of the second source shape Second Shape The resulting shape uses the colors listed below Stroke Color Viivan väri Fill Color Täyttöväri Result Takes Color from: PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Polkutyökalut Path Operations Polkuoperaatiot Apply fancy boolean operations to paths. Qt Version too old Qt on liian vanha This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Luo polku viivasta Path Tools Polkutyökalut Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Valitse hakemisto Loading Patterns Ladataan kuviointeja All Files (*) Kaikki tiedostot (*) Open Avaa Patterns Kuvioinnit Load Lataa Load File Load Set Lataa kokoelma Remove Poista Remove All Poista kaikki OK OK Cancel Peruuta &Name: &Nimi: Rename Entry Nimeä uudelleen All Supported Formats Kaikki tuetut tiedostotyypit Rename Nimeä uudelleen PatternPropsDialog Pattern Properties pt pt % % Offsets Siirtymät X: X: Y: Y: Scaling Koon muutos X-Scale: Koon muutos X Y-Scale: Koon muutos Y Rotation Kierto Skewing Spacing Value: Arvo: X-Skew: Y-Skew: Angle: Kulma: Flip: Close Sulje PctPlug Importing: %1 Tuodaan: %1 Analyzing File: Tutkitaan tiedostoa: Group%1 Ryhmä%1 Generating Items Luodaan kohteita PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Size: Koko: Resolution: Tarkkuus: DPI DPI Unknown Tuntematon Colorspace: Väriavaruus: Result Tulos Search Results for: Etsi tuloksia: &Preview &Esikatselu Alt+P Alt+P &Select Valit&se Alt+S Alt+S Cancel Peruuta PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Peruuta etsintä Start Search Aloita etsiminen Select a base directory for search Valitse juurihakemisto etsinnälle Scribus - Image Search Scribus - Kuvien etsintä The search failed: %1 Etsintä epäonnistui: %1 Search Images Etsi kuvia Search for: Etsi: Start at: Aloita: Change... Muuta... Searching Etsii Case insensitive search Aakkoslajiriippumaton etsintä Search recursively Etsi rekursiivisesti Base directory for search does not exist. Please choose another one. PicStatus Scribus - Image Search Scribus - Kuvien etsintä No images named "%1" were found. Kuvia nimellä "%1" ei löytynyt. Close Sulje Not on a Page Ei sivulla JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD emb. PSD Unknown Tuntematon n/a ei saatavilla Information Tiedot Path: Polku: Search... Etsi... Name: Nimi: Image Kuva DPI: DPI: Format: Muotoilu: Colorspace: Väriavaruus: Size Koko Pixels: Pikseliä: Scale: Skaalaa: Printed: Layout On Page: Sivulla: Select Valitse Image Tools Kuvatyökalut Set format specific properties of certain image types, like clipping paths Image Visible Kuva näkyvillä Image Effects... Kuvatehosteet... Edit Image... Muokkaa kuvaa... Extended Image Properties... Kuvan lisäominaisuudet... Sort by Name Lajittele nimen mukaan Sort by Page Lajittele sivun mukaan Manage Images Kuvien hallinta Go to Siirry Name of the image file Kuvatiedoston nimi Location where the image file is stored Kuvatiedoston sijainti Search for a missing image Etsi puuttuvaa kuvaa Type of the image Kuvatyyppi The colorspace of the image Kuvan väritila Colorspace used within the image, eg RGB or CMYK Kuvassa käytetty väritila esim RGB tai CMYK Native resolution of the image, in dots per inch Kuvan resoluutio, pistettä tuumalle Height and width of the image Kuvan korkeus ja leveys Horizontal and vertical scaling applied to the image Size of the image when printed Kuvan tulostuskoko Page that the image is displayed on Sivu, jolla kuva on Page Item: Kohde sivulla: Name of the page item that contains the image Kuvan sisältävän kohteen nimi Effective DPI: Todellinen DPI: Effective resolution of the image after scaling Koon muutoksen jälkeinen todellinen resoluutio Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Salli tai estä kohteen vienti Export/Print Image Vie ja tulosta kuva Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections More Always on Top Sort by Name Lajittele nimen mukaan Sort by Date Sort by Size Sort by Type Change sortorder Zoom in Lähennä Zoom out Loitonna Go to Page Preview Images Only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close Sulje Information Tiedot File Tiedosto Name: Nimi: Path: Polku: Size: Koko: Date: Päivämäärä: Image Kuva Format: Muotoilu: Width: Leveys: Colorspace: Väriavaruus: Height: Korkeus: DPI: DPI: Layers: Embedded Profile: Profile Name: Profiilin nimi: Filter / Search Filters: Filter Displayed Images Search Images Etsi kuvia Filter Collections ... ... Criteria << Add Name (Wildcards Allowed) Date Päivämäärä Size Koko Type Tyyppi Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s): Image Frame(s): Page(s) sivu(a) Position of New Frame(s) Top Left of Margins Vasen yläkulma reunuksista Top Left of Page Sivun vasen yläkulma Top Left of Bleed Custom Position Muu sijainti X: X: Y: Y: Same as Page Margins Same as Page Same as Bleed Custom Size Muu koko Insert Image into 0 Page(s) 0 Frame(s) Insert Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser... PixmapExportPlugin Save as &Image... Tallenna &kuvana... Export As Image Vie kuvana Exports selected pages as bitmap images. Vie valitut sivut bittikarttakuvina. Export successful Save as Image Tallenna kuvana The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager Liitännäistä ei löydy unknown error plugin manager tuntematon virhe Cannot find symbol (%1) plugin manager Symbolia "%1" ei löydy Plugin: loading %1 plugin manager Liitännäistä %1 ladataan init failed plugin load error alustus epäonnistui unknown plugin type plugin load error tuntematon liitännäistyyppi Plugin: %1 loaded plugin manager Liitännäinen %1 ladattu Plugin: %1 failed to load: %2 plugin manager Liitännäisen: lataaminen epäonnistui %1 %2 There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. Plugin: %1 initialized ok plugin manager Liitännäinen %1 alustettu Plugin: %1 failed post initialization plugin manager Liitännäisen %1 alustus epäonnistui PluginManagerPrefsGui Plugin Manager Liitännäisten hallinta Plugin Liitännäinen How to run Miten ajetaan Type Tyyppi Load it? Lataa? Plugin ID Liitännäisen ID File Tiedosto You need to restart the application to apply the changes. Ohjelma täytyy käynnistää uudestaan jotta muutokset tulevat voimaan. Form Lomake PolygonProps Polygon Properties Monikulmion ominaisuudet PolygonWidget Corn&ers: &Kulmat: &Rotation: Ki&erto: Apply &Factor Käytä &kerrointa % % &Factor: &Kerroin: Number of corners for polygons Monikulmion kulmien lukumäärä Degrees of rotation for polygons Monikulmion kierron aste Apply Convex/Concave Factor to change shape of Polygons Käytä koveruus-/kuperuuskerrointa muuttaaksesi kohteen muotoa. Sample Polygon Esimerkki monikulmiosta A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatiivinen arvo tekee monikulmiosta koveran (tai tähden muotoisen), positiivinen arvo tekee siitä kuperan. PolygonWidgetBase Form Lomake Corn&ers: &Kulmat: Number of corners for polygons Monikulmion kulmien lukumäärä &Rotation: Ki&erto: Degrees of rotation for polygons Monikulmion kierron aste Sample Polygon Esimerkki monikulmiosta Apply Convex/Concave Factor to change shape of Polygons Käytä koveruus-/kuperuuskerrointa muuttaaksesi kohteen muotoa. Apply &Factor Käytä &kerrointa &Factor: &Kerroin: A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatiivinen arvo tekee monikulmiosta koveran (tai tähden muotoisen), positiivinen arvo tekee siitä kuperan. % % C&urvature: PositionSetterWidget Form Lomake X-pos: Y-pos: Width: Leveys: Height: Korkeus: ... ... Preferences Tools Työkalut Guides Apuviivat Document Asiakirja Typography Typografia Display Näyttö Preferences Asetukset General Yleiset External Tools Ulkoiset työkalut Hyphenator Tavutus Fonts Fontit Color Management Värien hallinta PDF Export PDF-vienti Document Item Attributes Kohteen muuttujat Table of Contents and Indexes Sisällysluettelo ja hakemistot Keyboard Shortcuts Näppäinoikopolut Miscellaneous Muut Plugins Liitännäiset Preflight Verifier Tarkastustyökalu Scrapbook Leikekirja Printer Painoon PreferencesDialog Preferences Asetukset Export... Vie... Defaults &Apply &Käytä &OK &OK &Cancel &Peruuta User Interface Käyttöliittymä Paths Hakemistot Document Setup Asiakirjan asettelu Guides Apuviivat Typography Typografia Item Tools Operator Tools Hyphenator Tavutus Fonts Fontit Printer Painoon Color Management Värien hallinta Document Information Asiakirjan tiedot PDF Export PDF-vienti Preflight Verifier Tarkastustyökalu Document Item Attributes Kohteen muuttujat Tables of Contents Sections Alueet Keyboard Shortcuts Näppäinoikopolut Scrapbook Leikekirja Display Näyttö External Tools Ulkoiset työkalut Miscellaneous Muut Page Sizes Plugins Liitännäiset Image Cache Short Words Short Words Scripter Skripteri PrefsDialogBase &Defaults &Oletusarvot Save Preferences Tallenna asetukset Export... Vie... &Apply &Käytä All preferences can be reset here Palauta kaikki asetukset oletusarvoihin Apply all changes without closing the dialog Ota muutokset käyttöön sulkematta ikkunaa Export current preferences into file Tallenna nykyiset asetukset tiedostoon PrefsManager Postscript Postscript Migrate Old Scribus Settings? Tuo vanhat Scribuksen asetukset? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Scribus on löytänyt asetukset versiolle 1.2. Haluatko tuoda ne uuteen Scribuksen versioon? PostScript PostScript Could not open preferences file "%1" for writing: %2 Asetustiedostoa "%1" ei voitu avata kirjoittamista varten: %2 Scribus has detected existing Scribus 1.3.5 preferences files. Do you want to migrate them to the new Scribus version? Scribus on löytänyt asetukset versiolle 1.2. Haluatko tuoda ne uuteen Scribuksen versioon? {1.3.5 ?} Writing to preferences file "%1" failed: QIODevice status code %2 Asetustiedostoon "%1" kirjoittaminen epäonnistui. QIODevice statuskoodi %2 Failed to open prefs file "%1": %2 Asetustiedoston "%1" avaaminen epäonnistui: %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Asetusten luku tiedostosta %1 epäonnistui: %2 rivi %3, sarake %4 Error Writing Preferences Virhe kirjoitettaessa asetuksia Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Scribus ei pystynyt tallentamaan asetuksia:<br>%1<br>Tarkasta tiedosto- ja hakemisto-oikeudet ja käytettävissä oleva levytila. Error Loading Preferences Virhe luettaessa asetuksia Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. Scribus ei pystynyt lataamaan asetuksia:<br>%1<br>Oletusasetukset ladataan. No valid renderframe config found. Using defaults! Prefs_ColorManagement Form Lomake Color Management Värien hallinta Document Options Activate Color Management Simulate Printer on the Screen Convert all colors to printer space Muunna kaikki värit tulostimen väriavaruuteen Mark Colors out of Gamut Use Blackpoint Compensation Document Profiles RGB Images: CMYK Images: RGB Solid Colors: CMYK Solid Colors: Printer: Document Rendering Intents Images: Kuvat: Solid Colors: Tasaiset värit: Monitor Profile Monitor: Monitor profiles can only be changed when no documents are open Perceptual Perceptual Relative Colorimetric Relative Colorimetric Saturation Absolute Colorimetric Absolute Colorimetric Prefs_Display Form Lomake Display Näyttö Page Display Sivun näyttö Show Images Show Text Control Characters Näytä tulostumattomat merkit Show Rulers Näytä viivaimet Show Rulers Relative to Page Show Text Chains Näytä tekstiketjut Show Frames Näytä kehykset Show Layer Indicators Näytä tasojen merkit Show Unprintable Area in Margin Color Show Bleed Area Show Page Shadow Show Preflight Verifier Warnings on the Page Scratch Space Sivujen ulkopuolinen alue Left: Vasen reuna: Right: Top: Yläreuna: Bottom: Alareuna: Display Scaling Scratch Space: Gaps Between Pages Sivujen etäisyys toisistaan Pages Sivut Horizontal: Vaakasuora: Vertical: Pystysuora: Adjust Display Size Aseta näytön koko Scale% Resets the scale to the default dpi of your display Colors Värit Page Fill: Selected Page Border: Valitun sivun korostus: Frames: Locked Frames: Selected Frames: Linked Frames: Grouped Frames: Annotation Frames: Text Control Characters: Color for paper (onscreen) Mask the area outside the margins in the margin color Merkkaa reunusten ulkopuolinen alue reunuksen värillä Enable or disable the display of linked frames. Näytä tai piilota linkitetyt kehykset. Display non-printing characters such as paragraph markers in text frames Näytä tulostumattomat merkit kuten kappalemerkki tekstikehyksissä Turns the display of frames on or off Näytä tai piilota kehykset Turns the display of layer indicators on or off Turns the display of images on or off Turns the page shadow on or off Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrittelee tyhjän tilan määrän asiakirjan vasemmalla puolella, jota voi käyttää objektien säilytykseen ja työskentelyalueena sivua tehtäessä. Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrittelee tyhjän tilan määrän asiakirjan oikealla puolella, jota voi käyttää objektien säilytykseen ja työskentelyalueena sivua tehtäessä. Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrittelee tyhjän tilan määrän asiakirjan yläpuolella, jota voi käyttää objektien säilytykseen ja työskentelyalueena sivua tehtäessä. Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrittelee tyhjän tilan määrän asiakirjan alapuolella, jota voi käyttää objektien säilytykseen ja työskentelyalueena sivua tehtäessä. Set the default zoom level Aseta sivun näytettävä koko Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Aseta viivain näytölle ja säädä pituus oikeaksi. Tämä mahdollistaa sivujen ja objektien näytön oikean kokoisina. dpi dpi Prefs_DocumentInformation Form Lomake Document Information Asiakirjan tiedot Document Asiakirja Title: Otsikko: Author: Tekijä: Subject: Keywords: Avainsanat: Description: Kuvaus: Further Information Publisher: Contributors: Date: Päivämäärä: Type: Tyyppi: Format: Muotoilu: Identifier: Source: Language: Relation: Coverage: Rights: Prefs_DocumentItemAttributes Document Item Attributes Kohteen muuttujat Name Nimi Type Tyyppi Value Arvo Parameter Parametri Relationship Suhde Relationship To Suhteessa Auto Add To Lisää automaattisesti &Add &Lisää Alt+A Alt+A &Copy &Kopioi Alt+C Alt+C &Delete Alt+D Alt+D C&lear Alt+L Alt+L None relationship Ei mitään Relates To Suhteessa Is Parent Of On vanhempi Is Child Of On lapsi None auto add Ei mitään Text Frames Tekstikehykset Image Frames Kuvakehykset None types Ei mitään Boolean boolean Integer kokonaisluku Real Number reaaliluku String merkkijono Prefs_DocumentSections 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Page Number Out Of Bounds Sivunumero sallitun alueen ulkopuolella The value you have entered is outside the range of page numbers in the current document (%1-%2). Antamasi sivunumero on asiakirjan sallittujen arvojen ulkopuolella (%1-%2). Document Sections Asiakirjan osat Name Nimi Shown Näytä From Mistä To Minne Style Tyyli Start Aloitus Field Width Fill Character &Add &Lisää Alt+A Alt+A &Delete Alt+D Alt+D Prefs_DocumentSetup Form Lomake Document Setup Asiakirjan asettelu Page Size Sivun koko Size: Koko: ... ... Orientation: Units: Yksiköt: Width: Leveys: Height: Korkeus: Apply changes to all pages Apply changes to all master pages Layout Page Layout Saving && Undo Save in Compressed Format Autosave Automaattinen tallennus Enable Automatic Saving of Documents Interval: min Undo / Redo Enable Undo/Redo System Action History Length: Single Page Yksittäinen sivu pageLayoutButtonGroup Double Page 3-Fold Kolme sivua 4-Fold Neljä sivua First Page is: Ensimmäinen sivu on: Size Koko Margins && Bleeds Margins Reunukseen Bleeds Leikkausvarat Portrait Pystysuora Landscape Vaakasuora Width of document pages, editable if you have chosen a custom page size Asiakirjan sivun leveys, muokattavissa jos valitset sivun kooksi "Oma" Height of document pages, editable if you have chosen a custom page size Asiakirjan sivun korkeus, muokattavissa jos valitset sivun kooksi "Oma" Default page size, either a standard size or a custom size Oletuskoko sivulle, joko standardi tai itse määritelty koko Default page size, either a standard size or a custom size. More page sizes can be made visible by activating them in Preferences. Enable or disable more page sizes by jumping to Page Size preferences Default orientation of document pages Asiakirjan sivujen suunta Default unit of measurement for document editing Asiakirjan muokkauksessa käytettävä mittayksikkö When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Scribus tallentaa kopion asiakirjastasi bak-päätteellä aina kun valittu aikaväli edellisestä tallennuksesta täyttyy. Time period between saving automatically Automaattisen tallennuksen aikaväli Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Toimintohistorian pituus. 0 ei rajoita pituutta. Apply the page size changes to all existing pages in the document Käytä sivun koon asetuksia asiakirjan jokaiseen sivuun Apply the page size changes to all existing master pages in the document Käytä sivun koon muutosta kaikkiin asiakirjan mallisivuihin Prefs_ExternalTools External Tools Ulkoiset työkalut External Tools and Applications PostScript Interpreter PostScript-tulkki &Name of Executable: &Ajettavan tiedoston nimi: <qt>Add the path for the Ghostscript interpreter. On Windows, please note it is important to note you need to use the program named gswin32c.exe - NOT gswin32.exe. Otherwise, this maybe cause a hang when starting Scribus.</qt> &Change... &Muuta... Alt+C Alt+C Antialias text for EPS and PDF onscreen rendering Käytä reunanpehmennystä EPS- ja PDF-tekstiin näytöllä Antialias &Text Reunanpehmennys &tekstiin Alt+T Alt+T Antialias graphics for EPS and PDF onscreen rendering Käytä reunanpehmennystä EPS- ja PDF-grafiikkaan näytöllä Antialias &Graphics Reunanpehmennys &grafiikkaan Alt+G Alt+G Resolution: Tarkkuus: dpi dpi Image Processing Tool Kuvanmuokkaustyökalu Name of &Executable: &Ajettavan tiedoston nimi: <qt>File system location for graphics editor. If you use gimp and your distribution includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp.</qt> Web Browser Web-selain PDF Viewer Uniconvertor Render Frames Configurations: Up Down Add Delete Poista Change... Muuta... External Editor: <qt>Path to the editor executable.</qt> Start with empty frame Use Embedded Editor Always use the configured DPI setting for calculating the size, even if the image file reports something different. Force DPI Rescan for the external tools if they do not exist in the already specified location &Rescan Alt+R Alt+R Locate Ghostscript Ghostscriptin sijainti Locate your image editor Kuvanmuokkausohjelman sijainti Locate your web browser Web-selaimen sijainti Locate your PDF viewer Locate the uniconvertor executable Locate your editor Uniconvertor executable not found! LaTeX Command Scribus has found the following pdflatex command: %1 Do you want to use this? Locate a Configuration file Configuration files Change Command Enter new command: (leave empty to reset to default command; use quotes around arguments with spaces) Command: Prefs_Fonts Form Lomake Fonts Fontit Delete Poista C&hange... &Muuta... A&dd... &Lisää... &Remove Available Fonts Mahdolliset fontit Font Substitutions Korvaavat fontit Additional Paths Lisätyt polut Font Name Fontin nimi Replacement Korvaava Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Choose a Directory Valitse hakemisto Prefs_Guides Form Lomake Guides Apuviivat Placement Placement: Snap Distance: Kiinnitysetäisyys px px Grab Radius: Tartuntasäde: Visibility Margins Reunukseen Page Grid Baseline Grid Distances Etäisyydet Minor Grid Spacing: Baseline Grid Spacing: Major Grid Spacing: Baseline Grid Offset: Colors Värit Guides: Margins: Major Grid: Minor Grid: Baseline Grid: In the Background Taustalla In the Foreground Etualalla Place guides in front of or behind objects on the page Distance between the minor grid lines Apuruudukon viivojen välinen etäisyys Distance between the major grid lines Pääruudukon viivojen välinen etäisyys Distance within which an object will snap to your placed guides. After setting this you will need to restart Scribus to set this setting. Radius of the area where Scribus will allow you to grab an objects handles.After setting this you will need to restart Scribus to set this setting. Color of the minor grid lines Apuruudukon viivojen väri Color of the major grid lines Pääruudukon viivojen väri Color of the guide lines you insert Apuviivojen väri Color for the margin lines Sivun reunusten väri Color for the baseline grid Peruslinjan väri Turns the basegrid on or off Näyttää tai piilottaa peruslinjan Distance between the lines of the baseline grid Viivojen etäisyys peruslinjassa Distance from the top of the page for the first baseline Ensimmäisen viivan etäisyys sivun yläreunasta Turns the gridlines on or off Näytä tai piilota apuruudukko Turns the guides on or off Näyttää tai piilottaa apuviivat Turns the margins on or off Näyttää tai piilottaa reunukset Prefs_Hyphenator Form Lomake Hyphenation A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Dialogi-ikkuna, joka näyttää kaikki mahdolliset tavutettavat sanat tavutusvaihtoehtoineen, ilmestyy, kun käytät Työkalut, Tavuta teksti. &Hyphenation Suggestions &Tavutusehdotukset Enables automatic hyphenation of your text while typing. Mahdollistaa automaattiset tavutuksen kirjoittaessasi. Hyphenate Text Automatically &During Typing Tavuta teksti automaattisesti &kirjoitettaessa Behaviour Language: Smallest Word: Length of the smallest word to be hyphenated. Lyhimmän tavutettavan sanan pituus. Characters kirjainmerkkiä Consecutive Hyphenations Allowed: Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Suurin määrä tavutuksia peräkkäin. 0 tarkoittaa rajoittamatonta määrää tavutuksia. Word Lists Exceptions Edit Muokkaa Ignore List Ohitettavat Add a new Entry Lisää uusi Edit Entry Muokkaa Exception List Poikkeuslista Prefs_ImageCache Enabling the image cache will significantly speed up the loading of images. Enable the cache if you are often working on large documents with lots of images and if you have plenty of disk space in your application data directory. Limit the total size of all files in the image cache directory to this amount. Limit the number of cache entries to this number. Set the level of compression for images in the cache. Higher values result in smaller cache files but also make writes to the cache slower. Form Lomake Image Cache Enable Image Cache Cache Size Limit: Mb Cache Entry Limit: Compression Level: Prefs_ItemTools Form Lomake Item Tools Text Teksti Columns: Sarakkeet: Column Gap: Tab Fill Character: Sarkainmerkki: Tab Width: Sarkainleveys: Fill Color: Täyttöväri: Line Color: Shading: Sävy: % % Columns & Text Distances Top: Yläreuna: Bottom: Alareuna: Left: Vasen reuna: Right: Font: Fontti: Size: Koko: Color: Väri: Stroke: Preview Esikatselu Images Kuvat Use Embedded Clipping Path Scaling Koon muutos Free Scaling scalingButtonGroup Horizontal Scaling: Vertical Scaling: ... ... Scale Image to Frame Size Keep Aspect Ratio On Screen Preview Esikatselu näytöllä Full Resolution previewButtonGroup Normal Resolution Low Resolution Shapes Kuviot Line Style: Viivan tyyli: Line Width: Viivan leveys: Regular Polygons Tavalliset monikulmiot Lines Viivat Start Arrow: Nuolen alku: End Arrow: Nuolen loppu: Calligraphic Pen Pen Angle: Pen Width: Hairline Woven silk pyjamas exchanged for blue quartz Törkylempijä vongahdus on suomenkielinen pangram Keep horizontal and vertical scaling the same Säilytä sivujen suhde samana None tab fill Ei mitään Dot Piste Hyphen Yhdysmerkki Underscore Alaviiva Custom Oma Prefs_KeyboardShortcuts Keyboard Shortcuts Näppäinoikopolut Search: Etsi: Action Toiminta Shortcut Näppäinyhdistelmä Shortcut for Selected Action &No Key &Ei näppäintä Alt+N Alt+N &User Defined Key O&ma näppäin Alt+U Alt+U Set &Key &Aseta näppäin Alt+K Alt+K CTRL+ALT+SHIFT+W CTRL+ALT+SHIFT+W Loadable Shortcut Sets Ladattavat näppäinoikopolut Keyboard shortcut sets available to load Ladattavissa olevat näppäinoikopolut Load the selected shortcut set Lataa valittu näppäinoikopolku &Load &Lataa Alt+L Alt+L Import a shortcut set into the current configuration Tuo näppäinoikopolut nykyisiin asetuksiin &Import... &Tuo... Alt+I Alt+I Export the current shortcuts into an importable file Vie nykyiset näppäinoikopolut tiedostoon &Export... &Vie... Alt+E Alt+E Reload the default Scribus shortcuts Lataa oletusnäppäinoikopolut &Reset &Palauta Alt+R Alt+R Select a Key set file to read Key Set XML Files (*.xml) Select a Key set file to save to Export Keyboard Shortcuts to File Enter the name of the shortcut set: Alt Alt Ctrl Ctrl Shift Shift Meta Meta Meta+ Meta+ Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ This key sequence is already in use Näppäinyhdistelmä on jo käytössä Prefs_Miscellaneous Form Lomake Miscellaneous Muut Always ask before fonts are replaced when loading a document Kysy aina ennen fonttien korvaamista asiakirjan latauksen yhteydessä Preview of current Paragraph Style is visible when editing Styles Lorem Ipsum Lorem Ipsum Always use standard Lorem Ipsum text Paragraph Count: Prefs_OperatorTools Form Lomake Operator Tools Zoom Minimum: Maximum: Stepping: % % Miscellaneous Muut Item Duplicate X Displacement: Y Displacement: Rotation Tool Kiertotyökalu Constrain To: Minimum magnification allowed Pienin sallittu pienennös Maximum magnification allowed Suurin sallittu suurennus Change in magnification for each zoom operation Suurennoksen muutos jokaisella suurennoskerralla Horizontal displacement of page items Vertical displacement of page items Constrain value for the rotation tool when the Control key is pressed Prefs_PDFExport Form Lomake PDF Export PDF-vienti Export Range Tallennettavat sivut All Pages Kaikki sivut rangeButtonGroup Choose Pages ... ... Rotation and Mirroring Rotation: Kierto: Page Mirroring: Page Binding: Resolution for EPS Graphics: dpi dpi Clip to Printer Margins Limit Maximum Image Resolution to: Allow Copying Text and Graphics Registration Mark Offset: File Options Tiedoston ominaisuudet Pages Sivut Compatibility: Generate Thumbnails Save Linked Text Frames as PDF Articles Include Layers Include Bookmarks Embed PDF && EPS Files (Experimental) Compression Compress Text and Vector Graphics Image Compression Method: Image Compression Quality: Security Use Encryption Passwords Salasanat Owner: User: Settings Asetukset Allow Printing the Document Allow Changing the Document Allow Adding Annotations and Fields Color Väri Output Intended For: Convert Spot Colors to Process Colors Muunna lisävärit prosessiväreiksi Solid Colors Use Color Profile Profile: Profiili: Rendering Intent: Sovitustapa: Images Kuvat Do not use Embedded Color Profiles Custom Rendering Use Custom Rendering Color: Väri: Frequency: Angle: Kulma: ° Spot Function: Pre-Press Printer Marks