getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range importSVG("string") The "string" must be a valid filename for a SVG image. The text must be UTF8 encoded or 'unicode' string(recommended). newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. @default getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If printable is set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined"layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow"layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode"layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency"layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode is the name of one of the defined colors. If "name" is not given the currently selected item is used. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. About &About Contributions from: Kontribusi dari: A&uthors German: Jerman: French: Perancis: Ukrainian: Ukrania: Lithuanian: Lithuania: Polish: Polandia: Czech: Cechnya: Slovak: Slovakia: Norwegian: Norwegia: Russian: Rusia: &Translations &Online &Close &Tutup Development Team: Official Documentation: Other Documentation: Homepage Online Reference Bugs and Feature Requests Mailing List Official Translations and Translators: Previous Translation Contributors: About Scribus %1 Wiki %1 %2 %3 %3-%2-%1 %4 %5 Using Ghostscript version %1 No Ghostscript version available <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: Mac OS&#174; X Aqua Port: Windows&#174; Port: Tango Project Icons: &Updates Check for &Updates This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. Check for updates to Scribus. No data from your machine will be transferred off it. AboutPlugins Yes Ya No Tidak Filename: Version: Enabled: Release Date: Description: Author(s): Copyright: License: AboutPluginsBase Scribus: About Plug-ins &Close &Tutup Alt+C ActionManager &New &Open... &Close &Tutup &Save Save &As... Re&vert to Saved Collect for O&utput... Get Text... Ambil Teks... Append &Text... Get Image... Save &Text... Save as P&DF... Document &Setup... &Print... &Quit &Undo &Redo &Item Action Mode Cu&t &Copy &Paste Select &All &Deselect All &Search/Replace... Edit Image... C&olors... &Paragraph Styles... &Line Styles... &Master Pages... P&references... %1 pt &Other... &Left &Center &Right &Block &Forced &%1 % &Normal &Underline Underline &Words &Strike Through &All Caps Small &Caps Su&perscript Su&bscript S&hadow &Image Effects &Tabulators... D&uplicate &Multiple Duplicate &Delete &Group &Ungroup Is &Locked Si&ze is Locked Lower to &Bottom Raise to &Top &Lower &Raise Send to S&crapbook &Attributes... I&mage Visible &Update Image Adjust Frame to Image Extended Image Properties &Low Resolution &Normal Resolution &Full Resolution Is PDF &Bookmark Is PDF A&nnotation Annotation P&roperties Field P&roperties &Edit Shape... &Attach Text to Path &Detach Text from Path &Combine Polygons Split &Polygons &Bezier Curve &Image Frame &Polygon &Text Frame &Glyph... Sample Text &Insert... Im&port... &Delete... &Copy... &Move... &Apply Master Page... Manage &Guides... Manage Page Properties... &Fit in window &50% &75% &100% &200% &Thumbnails Show &Margins Show &Frames Show &Images Show &Grid Show G&uides Show &Baseline Grid Show &Text Chain Show Control Characters Rulers relative to Page Sn&ap to Grid Sna&p to Guides &Properties &Scrapbook &Layers &Arrange Pages &Bookmarks &Measurements Action &History Preflight &Verifier &Align and Distribute &Tools P&DF Tools Select Item T&able &Shape &Line &Freehand Line Rotate Item Putar Item Zoom in or out Zoom in Zoom out Edit Contents of Frame Edit Isi Frame Edit Text... Link Text Frames Unlink Text Frames &Eye Dropper Copy Item Properties Edit the text with the Story Editor Insert Text Frame Insert Image Frame Insert Table Insert Shape Insert Polygon Insert Line Insert Bezier Curve Insert Freehand Line &Manage Pictures &Hyphenate Text Dehyphenate Text &Generate Table Of Contents &About Scribus About &Qt Toolti&ps Scribus &Manual... Smart &Hyphen Non Breaking Dash Non Breaking &Space Page &Number New Line Frame Break Column Break Copyright Registered Trademark Trademark Bullet Em Dash En Dash Figure Dash Quotation Dash Apostrophe Straight Double Single Left Single Right Double Left Double Right Single Reversed Double Reversed Single Left Guillemet Single Right Guillemet Double Left Guillemet Double Right Guillemet Low Single Comma Low Double Comma CJK Single Left CJK Single Right CJK Double Left CJK Double Right Toggle Palettes Toggle Guides Print Previe&w &JavaScripts... Convert to Master Page... &Cascade &Tile &About Plug-ins More Info... &Printing Enabled &Flip Horizontally &Flip Vertically Show Rulers &Outline Document Outline Palette Solidus Middle Dot En Space Em Space Thin Space Thick Space Mid Space Hair Space Insert Smart Hyphen Insert Non Breaking Dash Insert Non Breaking Space Insert Page Number ff fi fl ffi ffl ft st S&tyles... &Outline type effect &Outlines Convert to oulines Paste (&Absolute) C&lear Insert PDF Push Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Save as &EPS... Show Text Frame Columns Get Text 2... &Frame... Preview Mode Show Layer Indicators Patterns... Send to Patterns AdvOptions Advanced Options Pilihan Advanced Align Distribute/Align Sebar/Bariskan Align Bariskan Horizontal Horisontal Left Sides Sisi Kiri Middles Tengah Right Sides Sisi Kanan Vertical Vertikal Top Sides Sisi Atas Bottom Sides Sisi Bawah AlignDistributeBase Align and Distribute Align Bariskan &Selected Guide: &Relative To: ... Distribute &Distance: AlignDistributePalette Align and Distribute Align Bariskan &Relative to: First Selected Last Selected Page Halaman Margins Guide Selection Align right sides of objects to left side of anchor Align left sides of objects to right side of anchor Align bottoms Align right sides Align tops of objects to bottom of anchor Center on vertical axis Align left sides Center on horizontal axis Align bottoms of objects to top of anchor Align tops &Selected Guide: Make horizontal gaps between objects equal Make horizontal gaps between objects equal to the value specified Distribute right sides equidistantly Distribute bottoms equidistantly Distribute centers equidistantly horizontally Make vertical gaps between objects equal Make vertical gaps between objects equal to the value specified Distribute left sides equidistantly Distribute centers equidistantly vertically Distribute tops equidistantly &Distance: Distribute the items with the distance specified None Selected Warning Peringatan Y: %1%2 X: %1%2 Make horizontal gaps between objects and sides of page equal Make vertical gaps between objects and the top and bottom of page margins equal Make horizontal gaps between objects and sides of page margins equal Make vertical gaps between objects and the top and bottom of page equal AlignSelect Align Text Left Bariskan Teks di Kiri Align Text Right Bariskan Teks di Kanan Align Text Center Bariskan Teks di Tengah Align Text Justified Align Text Forced Justified Annot Field Properties Properti Field Type: Tipe: Button Tombol Text Field Field Teks Check Box Kotak Cek Combo Box Kotak Combo List Box Kotak Daftar Properties Properti Name: Nama: Tool-Tip: Tool-Tip: Text Teks Font for use with PDF 1.3: Border Batas Color: Warna: None Kosong Width: Lebar: Thin Tipis Normal Normal Wide Lebar Style: Solid Solid Dashed Putus-putus Underline Garis Bawah Beveled Inset Sisipan Other Lainnya Read Only Hanya-Baca Required Dibutuhkan Don't Export Value Jangan Mengekspor Nilai Visibility: Visibilitas: Visible Tampak Hidden Tersembunyi No Print Tidak boleh Dicetak No View Tidak boleh Dilihat Appearance Penampilan Text for Button Down Teks untuk Tombol Turun Text for Roll Over Teks untuk Roll Over Icons Use Icons Gunakan Ikon Remove Hapus Pressed Ditekan Roll Over Icon Placement... Peletakan Ikon... Highlight Invert Balik Outlined Push Tekan Multi-Line Banyak-Garis Password Kata kunci Limit of Batas dari Characters Karakter Do Not Scroll Jangan Scroll Do Not Spell Check Jangan Periksa Ejaan Check Style: Periksa Gaya: Check Periksa Cross Silang Diamond Berlian Circle Lingkaran Star Bintang Square Persegi Default is Checked Default Terpilih Editable Bisa diedit Options Pilihan Java Script Java Script Go To Pergi Ke Submit Form Kirim Formulir Reset Form Reset Formulir Import Data Impor Data Event: Kejadian: Mouse Up Mouse Naik Mouse Down Mouse Turun Mouse Enter Mouse Enter Mouse Exit Mouse Keluar On Focus Saat Fokus On Blur Saat Blur Script: Skrip: Edit... Edit... Submit to URL: Kirim ke URL: Submit Data as HTML Kirim Data sebagai HTML Import Data from: Impor Data dari: Destination Tujuan To File: Change... Ubah... Page: Halaman: X-Pos: pt Y-Pos: Action Aksi Field is formatted as: Field diformat sebagai: Plain Biasa Number Nomor Percentage Persentasi Date Tanggal Time Waktu Custom Atur Sendiri Number Format Format Penomoran Decimals: Desimal: Use Currency Symbol Gunakan Simbol Mata Uang Prepend Currency Symbol Formatting Pengaturan Percent Format Format Persen Date Format Format Tanggal Time Format Format Waktu Custom Scripts Skrip Sendiri Format: Format: Keystroke: Kunci: Format Format Value is not validated Nilai tidak divalidasi Value must be greater than or equal to: Nilai harus lebih besar atau sama dengan: and less or equal to: dan kurang dari atau sama dengan: Custom validate script: Skrip divalidasi sendiri: Validate Validasi Value is not calculated Nilai tidak dihitung Value is the Nilainya adalah sum jumlah product perkalian average rata-rata minimum minimum maximum maksimum of the following fields: dari field berikut: Pick... Ambil... Custom calculation script: Skrip perhitungan sendiri: Calculate Hitung OK OK Cancel Batal Flag is ignored for PDF 1.3 Enter a comma separated list of fields here You need at least the Icon for Normal to use Icons for Buttons Anda membutuhkan setidaknya Ikon untuk Normal untuk menggunakan Ikon untuk Tombol Open Buka Example: Contoh: Selection Change Perubahan Pilihan PDF Files (*.pdf);;All Files (*) JavaScript Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) None highlight Kosong None action Kosong Tooltip: Do Not Export Value Annota Annotation Properties Properti Anotasi Text Teks Link Link External Link External Web-Link Destination Tujuan pt Open Buka PDF-Documents (*.pdf);;All Files (*) &Type: C&hange... &Page: &X-Pos &Y-Pos: ApplyMasterPageDialog Normal Normal Apply Master Page &Master Page: Apply To Current &page Alt+P &Even pages Alt+E O&dd pages Alt+D &All pages Alt+A &Within range Alt+W to Alt+O Alt+C Apply the selected master page to even, odd or all pages within the following range ApplyT Apply Template Terapkan Template Normal Normal ArrowChooser None Kosong Barcode &Barcode Generator... Scribus frontend for Pure Postscript Barcode Writer BarcodeGenerator Error opening file: %1 12 or 13 digits 8 digits 11 or 12 digits 7 or 8 digits 5 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits Variable number of digits and capital letters Variable number of hexadecimal characters Barcode incomplete For ISBN-10 the data should contain 9 or 10 digits separated appropriately by dash characters. For ISBN-13 the data should contain 12 or 13 digits separated appropriately by dash characters. If the last digit is not given then the ISBN checkdigit is calculated automatically. BarcodeGeneratorBase Barcode Creator Barcode &Type: Select one of the available barcode type here The numeric representation of the code itself. See the help message below Reset the barcode samples &Include text in barcode Alt+I If checked, there will be numbers in the barcode too &Guard whitespace Alt+G Draw arrows to be sure of space next the code Colors Warna &Background Alt+B Background color - under the code lines &Lines Alt+L Color of the lines in barcode &Text Alt+T Color of the text and numbers Hints and help is shown here Preview of the result. 72dpi sample. Co&de: I&nclude checksum Alt+N Generate and include a checksum in barcode Incl&ude checksum digit Alt+U Include the checksum digit in the barcode text Biblio Scrapbook Scrapbook &Close &Tutup Rename Delete Hapus Warning Peringatan Name "%1" isn't unique. Please choose another. Nama "%1" tidak unik. Silakan pilih nama lain. OK OK Object Obyek &Name: New Entry Entri Baru Name "%1" is not unique. Please choose another. Choose a Scrapbook Directory Choose a Directory Pilih Direktori Scrapbook (*.scs) Choose a scrapbook file to import Create a new scrapbook page Load an existing scrapbook Save the selected scrapbook Import an scrapbook file from Scribus <=1.3.2 Close the selected scrapbook Copy To: Move To: Main Copied Items BookMView Bookmarks Bookmark Move Bookmark Pindahkan Bookmark Insert Bookmark Masukkan Bookmark Cancel Batal BookPalette Bookmarks Bookmark ButtonIcon Icon Placement Layout: Tataletak: Caption only Hanya Caption Icon only Hanya Ikon Caption below Icon Caption di bawah Ikon Caption above Icon Caption di atas Ikon Caption right to Icon Caption di kanan Ikon Caption left to Icon Caption di kiri Ikon Caption overlays Icon Caption melapisi Ikon Scale: Skala: Always Selalu When Icon is too small Jika Ikon terlalu kecil When Icon is too big Jika Ikon terlalu besar Never Tidak pernah Scale How: Proportional Proporsional Non Proportional Tidak Proporsional Icon OK OK Cancel Batal Reset Reset CMSPrefs Color Management Settings Pengaturan Manajemen Warna &Activate Color Management System Profiles Profil Sistem &Monitor: P&rinter: Rendering Intents Intensitas Rendering Perceptual Relative Colorimetric Colorimetric Relatif Saturation Saturasi Absolute Colorimetric Colorimetric Absolut Sim&ulate Printer on the Screen Mark Colors out of &Gamut Use &Blackpoint Compensation Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. &RGB Pictures: &CMYK Pictures: Default color profile for imported CMYK images Default color profile for imported RGB images &RGB Solid Colors: &CMYK Solid Colors: Pictures: Sol&id Colors: Convert all colors to printer space Default color profile for solid RGB colors on the page Default color profile for solid CMYK colors on the page Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. CMYKChoose Edit Color Edit Warna &Name: Color &Model CMYK RGB Web Safe RGB New Baru Old Tua HSV-Colormap C: % M: Y: K: Dynamic Color Bars Batang Warna Dinamis Static Color Bars Batang Warna Statis R: G: B: Warning Peringatan OK OK None Kosong Is Spot Color Is Registration Color You cannot create a color named "%1". It is a reserved name for transparent color Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself. If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. The name of the color already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. CStylePBase Form1 Parent CWDialog Normal Vision Protanopia (Red) Deuteranopia (Green) Tritanopia (Blue) Full Color Blindness Merging colors Error: Color %1 exists already! Color %1 appended. Now opening the color manager. Color Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. CWDialogBase Color Wheel Click the wheel to get the base color. Its color model depends on the chosen tab. CMYK C: M: Y: K: RGB: RGB R: G: B: CMYK: Document Dokumen Color Scheme Method: Select one of the methods to create a color scheme. Refer to documentation for more information. Angle: Difference between the selected value and the counted ones. Refer to documentation for more information. Preview: Vision Defect Type: Sample color scheme. Colors of your chosen color scheme. &Merge Alt+M Merge created colors into the document colors &Replace Alt+R Replace created colors in the document colors &Cancel Alt+C Leave colors untouched Simulate common vision defects here. Select type of the defect. CharSelect Select Character: Font: Character Class: &Insert C&lear &Close &Tutup Insert the characters at the cursor in the text Delete the current selection(s). Full Character Set Basic Latin Latin-1 Supplement Latin Extended-A Latin Extended-B General Punctuation Super- and Subscripts Currency Symbols Letterlike Symbols Number Forms Arrows Mathematical Operators Box Drawing Block Elements Geometric Shapes Miscellaneous Symbols Dingbats Small Form Variants Ligatures Specials Greek Greek Extended Cyrillic Cyrillic Supplement Arabic Arabic Extended A Arabic Extended B Hebrew &Insert Code: Close this dialog and return to text editing Type in a four digit unicode value directly here You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one CheckDocument Current Profile: Items Problems Glyphs missing Text overflow Object is not on a Page Missing Image Object has transparency Object is a placed PDF Document Dokumen No Problems found Page Free Objects Problems found Preflight Verifier Object is a PDF Annotation or Field &Ignore Errors Check again Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Image is GIF OK OK Transparency used Blendmode used Layer "%1" ChooseStyles Choose Styles Available Styles OK OK Cancel Batal CollectForOutput Choose a Directory Pilih Direktori Collecting... Warning Peringatan Cannot collect all files for output for file: %1 Cannot collect the file: %1 ColorManager Colors Warna &Import &New &Edit D&uplicate &Delete &Remove Unused Color Sets Current Color Set: &Save Color Set Choose a color set to load Save the current color set Remove unused colors from current document's color set Import colors to the current set from an existing document Create a new color within the current set Edit the currently selected color Make a copy of the currently selected color Delete the currently selected color Make the current colorset the default color set &Name: Choose a Name Open Buka Copy of %1 New Color Warna Baru If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management. Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.ps *.ai);;All Files (*) Documents (*.sla *.scd);;Other Files (*.eps *.ps *.ai);;All Files (*) ColorWheel Monochromatic Analogous Complementary Split Complementary Triadic Tetradic (Double Complementary) Base Color Monochromatic Light Monochromatic Dark 1st. Analogous 2nd. Analogous 1st. Split 2nd. Split 3rd. Split 4th. Split 1st. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) ColorWheelDialog Color Warna New Color Warna Baru ColorWheelPlugin &Color Wheel... Color setting helper Color selector with color theory included. CommonStrings &Apply &Cancel None Kosong &OK &Save Warning Peringatan None color name Kosong Custom CommonStrings, custom page size Atur Sendiri Single Page Double Sided 3-Fold 4-Fold Left Page Halaman Kiri Middle Middle Left Middle Right Right Page Halaman Kanan Monday Tuesday Wednesday Thursday Friday Saturday Sunday January February March April May June July August September October November December Yes Ya No Tidak &Yes &No Normal Normal Normal Left Normal Middle Normal Right Cpalette Shade: Tingkat Kegelapan: % Opacity: Normal Normal Horizontal Gradient Gradien Horisontal Vertical Gradient Gradien Vertikal Diagonal Gradient Gradien Diagonal Cross Diagonal Gradient Radial Gradient Gradien Radial Free linear Gradient Free radial Gradient X1: Y1: pt X2: Y2: Edit Line Color Properties Edit Fill Color Properties Saturation of color Normal or gradient fill method Set the transparency for the color selected None Kosong Move Vector Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Transparency Settings Blend Mode: Darken Lighten Multiply Screen Overlay Hard Light Soft Light Difference Color Dodge Color Burn Hue Saturation Saturasi Color Warna Luminosity Offsets X: Y: Scaling Rotation Angle Pattern Exclusion X-Scale: Y-Scale: CreateRangeBase Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Add a Range of Pages Consecutive Pages From: To: Comma Separated List Even Pages Odd Pages &Add To Range Alt+A Range of Pages Move &Up Alt+U Move &Down Alt+D De&lete Alt+L Advanced Reordering Page Group Size: Sample Page Order: Page Order &OK Alt+O &Cancel Alt+C CsvDialog CSV Importer Options Field delimiter: (TAB) Value delimiter: None Kosong First row is a header OK OK Cancel Batal None delimiter Kosong CupsOptions Printer Options Pilihan Printer Page Set Ketetapan Halaman All Pages Semua Halaman Even Pages only Halaman Genap saja Odd Pages only Halaman Ganjil saja Mirror Balik No Tidak Yes Ya Orientation Portrait Tegak Landscape Datar N-Up Printing Page per Sheet Halaman per Lembar Pages per Sheet Halaman per Lembar Option Pilihan Value Nilai This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Buka Curve Files (*.scu);;All Files (*) Save as Simpan sebagai Cannot write the file: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog &Compress File &Include Fonts Encoding: Moves to your Document Directory. This can be set in the Preferences. Pindah ke Direktori Dokumen anda. Hal ini bisa diatur di Preferensi. &Include ICC Profiles DeferredTask Cancelled by user DelColor Delete Color Hapus Warna Replace it with: Gantikan dengan: OK OK Cancel Batal None Kosong Delete Color: Replace With: DelPages Delete Pages Hapus Halaman Delete from: Hapus dari: to: ke: Delete From: DelStyle Delete Style Delete Style: Replace With: No Style DmF Missing Font Font Hilang The Font %1 is not installed. Font %1 belum terinstal. Use Gunakan instead sebagai pengganti OK OK DocIm Importing failed Importing Word document failed %1 DocInfos Document Information &Title: &Author: &Keywords: Descri&ption: P&ublisher: &Contributors: Dat&e: T&ype: F&ormat: Identi&fier: &Source: &Language: &Relation: Co&verage: Ri&ghts: Further &Information A person or organisation responsible for making the document available A person or organisation responsible for making contributions to the content of the document A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc An unambiguous reference to the document within a given context such as ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Information about rights held in and over the document, eg. copyright, patent or trademark Documen&t The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Delete the currently selected section. 1, 2, 3, ... i, ii, iii, ... I, II, III, ... a, b, c, ... A, B, C, ... <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). DocSectionsBase Document Sections Name From To Style Gaya Start &Add Alt+A &Delete Alt+D Shown DocumentItemAttributes None Kosong Relates To Is Parent Of Is Child Of Text Frames Image Frames Boolean Integer String Type Tipe None relationship Kosong None auto add Kosong None types Kosong Real Number DocumentItemAttributesBase Document Item Attributes Name Type Tipe Value Parameter Relationship Relationship To Auto Add To &Add Alt+A &Copy Alt+C &Delete Alt+D C&lear Alt+L Druck Setup Printer Pengaturan Printer Print Destination File Berkas &Options... &File: C&hange... A&lternative Printer Command Co&mmand: Range Print &All Print Current Pa&ge Print &Range Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. N&umber of Copies: Options Pilihan All Semua Cyan Magenta Yellow Black &Print Save as Simpan sebagai Print Normal Print Separations Print in Color if Available Print in Grayscale PostScript Level 1 PostScript Level 2 PostScript Level 3 Page Halaman Mirror Page(s) Horizontal Mirror Page(s) Vertical Set Media Size Color Warna Apply Under Color Removal Convert Spot Colors to Process Colors Apply ICC Profiles Advanced Options Pilihan Advanced Preview... Sets the PostScript Level. Setting to Level 1 or 2 can create huge files PostScript Files (*.ps);;All Files (*) Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Allows you to embed ICC profiles in the print stream when color management is enabled This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Clip to Page Margins Failed to retrieve printer settings Do not show objects outside the margins on the printed page Force Overprint Mode Enables global Overprint Mode for this document, overrides object settings EPSPlug Importing File: %1 failed! Fatal Error Kesalahan Fatal Error Importing PostScript Analyzing PostScript: Generating Items Converting of %1 images failed! Group%1 EditStyle Edit Style Edit Gaya &Name: Character Karakter pt &Lines: None Kosong Vertical Spaces Spasi Vertikal Tabulators and Indentation Name of your paragraph style Font of selected text or object Font Size Ukuran Font Color of text fill Color of text stroke Determines the overall height, in line numbers, of the Drop Caps Spacing above the paragraph Spacing below the paragraph Line Spacing Warning Peringatan Name of the Style is not unique Nama Gaya tidak unik OK OK % Distances Fixed Linespacing Automatic Linespacing Align to Baseline Grid Drop Caps Distance from Text: Preview of the Paragraph Style Determines the gap between the DropCaps and the Text Toggles sample text of this paragraph style Name of the style is not unique Background Latar Belakang Select for easier reading of light coloured text styles Manual Tracking Offset to baseline of characters Click to select the line spacing mode Editor Editor &New &Open... Save &As... &Save and Exit &Exit without Saving &Undo &Redo Cu&t &Copy &Paste C&lear &Get Field Names &File &Edit JavaScripts (*.js);;All Files (*) EffectsDialog Image Effects Options: Color: Shade: Tingkat Kegelapan: Brightness: Contrast: Radius: Value: Posterize: Available Effects Blur Brightness Colorize Contrast Grayscale Invert Balik Posterize Sharpen >> << Effects in use OK OK Cancel Batal Color 1: Color 2: Color 3: Color 4: Duotone Tritone Quadtone Curves ExportBitmap File exists. Overwrite? exists already. Overwrite? All Semua ExportForm Choose a Export Directory Export as Image(s) &Export to Directory: C&hange... Options Pilihan Image &Type: &Quality: &Resolution: % dpi Range &Current page &All pages &Range C Export a range of pages Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Export all pages Export only the current page Resolution of the Images Use 72 dpi for Images intended for the Screen The quality of your images - 100% is the best, 1% the lowest quality Available export formats The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Change the output directory &Size: Size of the images. 100% for no changes, 200% for two times larger etc. Image size in Pixels ExtImageProps Extended Image Properties Normal Normal Darken Lighten Hue Saturation Saturasi Color Warna Luminosity Multiply Screen Dissolve Pecahkan Overlay Hard Light Soft Light Difference Exclusion Color Dodge Color Burn Blend Mode: Opacity: % Name Background Latar Belakang Layers Don't use any Path Paths FDialogPreview Size: Ukuran: Title: Judul: No Title Tidak Berjudul Author: Penulis: Unknown Tidak diketahui Scribus Document Resolution: DPI CMYK RGB Colorspace: Grayscale Duotone Farbmanager Colors Warna Open Buka New Color Warna Baru None Kosong FileLoader Some fonts used by this document have been substituted: was replaced by: FontPrefs Available Fonts Font yang tersedia Font Substitutions Substitusi Font Additional Paths Path Tambahan Yes Ya Font Name Nama Font Use Font Gunakan Font Embed in: Masukkan ke dalam: Type Tipe &Available Fonts Replacement Penggantian &Delete Font &Substitutions C&hange... A&dd... &Remove Additional &Paths Choose a Directory Pilih Direktori Font Name font preview Use Font font preview Gunakan Font Embed in: font preview Masukkan ke dalam: Subset font preview Path to Font File font preview Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. Embed in PostScript font preview FontPreview Type font preview Tipe User font preview System font preview Append selected font into Style, Font menu font preview Leave preview font preview Woven silk pyjamas exchanged for blue quartz font preview &Close font preview &Tutup Start searching Size of the selected font Sample will be shown after key release Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name. FontPreviewBase Fonts Preview &Quick Search: &Search Alt+S Font Name Doc Type Tipe Subset Access &Font Size: Text Teks Sample text to display Se&t Alt+T Reset the text &Append Alt+A &Close &Tutup Alt+C FontPreviewPlugin &Font Preview... Font Preview dialog Sorting, searching and browsing available fonts. FontReplaceDialog Font Substitution Original Font Substitution Font Make these substitutions permanent OK OK This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Cancels these font substitutions and stops loading the document. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. If you select OK, then save, these substitutions are made permanent in the document. GradientEditor Position: % Add, change or remove color stops here GuideManager Manage Guides Atur Pemandu Horizontal Guides Pemandu Horisontal Vertical Guides Pemandu Vertikal &Close &Tutup Preview Prapandang Edit Guide Enter a position: New Guide GuideManagerBase Manage Guides Atur Pemandu Horizontals Guide &Add Alt+A D&elete Alt+E Verticals A&dd Alt+D De&lete Alt+L &Lock Guides Appl&y to All Pages Alt+Y &Number: U&se Gap: Alt+S Nu&mber: Use &Gap: Alt+G Refer To &Page Alt+P M&argins S&election &Misc Delete &Page Guides Delete all guides from the current page Delete &Document guides Delete all guides from the current document &Single &Column/Row HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Contents Link Link Scribus Online Help &Contents &Search Se&arch &New &Delete De&lete All Book&marks &Print... E&xit Searching is case unsensitive Find Search Term: New Bookmark New Bookmark's Title: &File &Find... Find &Next Find &Previous &Edit &Add Bookmark D&elete All &Bookmarks Relevance HyAsk Possible Hyphenation Accept Terima Skip Lewati Cancel Batal HySettings &Language: &Smallest Word: Length of the smallest word to be hyphenated. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. &Hyphenation Suggestions Hyphenate Text Automatically &During Typing A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Enables automatic hyphenation of your text while typing. Consecutive Hyphenations &Allowed: ImageInfoDialog Image Info General Info Date / Time: Has Embedded Profile: Yes Ya No Tidak Profile Name: Has Embedded Paths: Has Layers: EXIF Info Artist: Comment: User Comment: Camera Model: Camera Manufacturer: Description: Copyright: Scanner Model: Scanner Manufacturer: ImportPSPlugin Import &EPS/PS... Imports EPS Files Imports most EPS files into the current document, converting their vector data into Scribus objects. PostScript PDF InsPage Insert Page Masukkan Halaman Page(s) before Page sebelum Halaman after Page sesudah Halaman at End di Akhir Inserting Memasukkan Normal Normal Template (Right Page): Template (Halaman Kanan): &Insert Master Pages &Master Page: Page Size Ukuran Halaman &Size: Custom Atur Sendiri Orie&ntation: Portrait Tegak Landscape Datar &Width: &Height: Move Objects with their Page InsertAFrame Open Buka <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the simple Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. InsertAFrameBase Insert A Frame T&ype &Text Frame Alt+T &Image Frame Alt+I T&able Alt+A Shape Polygon Poligon &Location Page Placement Current Page Selecting this will place the frame only on the current page. Range of Pages: Selecting this will place frame on the selected range. Position of Frame Top Left of Page Selecting this puts the frame on the top left with postion 0,0 Top Left of Margins Selecting this places the frame in the upper left of the page margins defined in your doc setup. Custom Position: Set the dimensions wished below in the X: Y: dialog below. X: Y: &Size U&kuran Same as the Page Same as the Page Margins Custom Size: Height: Tinggi: Width: Lebar: &Options Source Image: &Select File... Alt+S There are no options for this type of frame Source Document: Columns: Gap: &OK &Cancel Link Created Frames InsertTable Insert Table OK OK Cancel Batal Number of rows: Number of columns: JavaDocs Edit JavaScripts &Edit... &Add... &Delete &Close &Tutup &New Script: New Script Skrip Baru Warning Peringatan Do you really want to delete this script? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. KeyManager Manage Keyboard Shortcuts Atur Shortcut Keyboard Action Aksi Current Key Kunci saat ini Select a Key for this Action Pilih Kunci untuk Aksi ini Warning Peringatan LayerPalette Layers Layer Add a new Layer Tambahkan Layer Baru Delete Layer Hapus Layer Raise Layer Naikkan Layer Lower Layer Turunkan Layer New Layer Layer Baru Name Do you want to delete all objects on this layer too? Add a new layer Delete layer Raise layer Lower layer Opacity: % Blend Mode: Normal Normal Darken Lighten Multiply Screen Overlay Hard Light Soft Light Difference Color Dodge Color Burn Exclusion Hue Saturation Saturasi Color Warna Luminosity Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Name of the Layer - Double clicking on the name of a layer enabled editing Duplicates the current layer LineFormate Edit Line Styles &New &Edit D&uplicate &Delete &Save Copy of %1 New Style Gaya Baru Warning Peringatan Open Buka Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) &Import Do you really want to delete this style? LineStyleWBase LineStyleWBase % Line Width: LineStyleWidget pt Flat Cap Square Cap Round Cap Miter Join Bevel Join Round Join LoadSavePlugin All Files (*) LoremManager Select Lorem Ipsum Author: Get More: XML File: Lorem Ipsum Paragraphs: Alt+O Alt+C MarginDialog Manage Page Properties Page Size Ukuran Halaman &Size: Custom Atur Sendiri Orie&ntation: Portrait Tegak Landscape Datar &Width: &Height: Move Objects with their Page Type: Margin Guides Pemandu Gari Tepi Other Settings Master Page: Normal Normal MarginWidget &Bottom: &Top: &Right: &Left: Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page &Inside: O&utside: Preset Layouts: Apply the margin changes to all existing pages in the document Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Printer Margins... Import the margins for the selected page size from the available printers. Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing master pages in the document MasterPagesPalette Edit Master Pages Warning Peringatan Do you really want to delete this master page? &Name: New Master Page Name: Nama: New MasterPage Copy #%1 of Normal Normal Duplicate the selected master page Delete the selected master page Add a new master page Import master pages from another document New Master Page %1 Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Mdup Multiple Duplicate Penyalinan Banyak &Number of Copies: &Horizontal Shift: &Vertical Shift: Measurements Distances Jarak X1: Y1: X2: Y2: DX: DY: Angle: Sudut: Length: Panjang: pt MergeDoc Import Page(s) Change... Ubah... from 0 Create Page(s) before Page sebelum Halaman after Page sesudah Halaman at End di Akhir Import Impor Cancel Batal Open Buka Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) from %1 &From Document: Chan&ge... &Import Page(s): Before Page After Page At End &Import Import Master Page &Import Master Page Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. MissingFont Missing Font Font Hilang The Font %1 is not installed. Font %1 belum terinstal. Use Gunakan instead sebagai pengganti ModeToolBar Tools Alat bantu Properties... Properti... MovePages Move Pages Pindah Halaman Copy Page Salin Halaman Move Page(s): Pindah Halaman: to: ke: before Page sebelum Halaman after Page sesudah Halaman at End di Akhir Move Page(s) Before Page After Page At End To: Number of copies: Mpalette Properties Properti X, Y, &Z &Shape &Text &Image &Line &Colors Name Geometry Geometri pt &X-Pos: &Y-Pos: &Width: &Height: &Rotation: Basepoint: Level Level Shape: &Edit Shape... R&ound Corners: Distance of Text Jarak Teks Colu&mns: To&p: &Bottom: &Left: &Right: T&abulators... Path Text Properties Show Curve Tampilkan Kurva Start Offset: Distance from Curve: Jarak dari Kurva: Use &Bounding Box &Use Contour Line % Shade: Tingkat Kegelapan: Custom Spacing Spasi Sendiri St&yle: &Free Scaling X-Sc&ale: Y-Scal&e: Scale &To Frame Size P&roportional Input Profile: Profil Masukan: Rendering Intent: Intensitas Rendering Perceptual Relative Colorimetric Colorimetric Relatif Saturation Saturasi Absolute Colorimetric Colorimetric Absolut Left Point Titik Kiri End Points &Basepoint: T&ype of Line: Line &Width: Miter Join Bevel Join Round Join Ed&ges: Flat Cap Square Cap Round Cap &Endings: No Style Tanpa Gaya Cell Lines Line at Top Line at the Left Line at the Right Line at Bottom Name of selected object Horizontal position of current basepoint Vertical position of current basepoint Width Height Rotation of object at current basepoint Point from which measurements or rotation angles are referenced Select top left for basepoint Select top right for basepoint Select bottom left for basepoint Select bottom right for basepoint Select center for basepoint Flip Horizontal Flip Vertical Move one level up Move one level down Move to front Move to back Indicates the level the object is on, 0 means the object is at the bottom Lock or unlock the object Lock or unlock the size of the object Enable or disable printing of the object Font of selected text or object Font Size Ukuran Font Scaling width of characters Saturation of color of text stroke Saturation of color of text fill Manual Kerning Penonjolan Manual Line Spacing Style of current paragraph Change settings for left or end points Pattern of line Thickness of line Type of line joins Type of line end Line style of current object Choose the shape of frame... Edit shape of the frame... Set radius of corner rounding Number of columns in text frame Switches between Gap or Column width Distance between columns Distance of text from top of frame Distance of text from bottom of frame Distance of text from left of frame Distance of text from right of frame Edit tab settings of text frame... Allow the image to be a different size to the frame Horizontal offset of image within frame Vertical offset of image within frame Resize the image horizontally Resize the image vertically Keep the X and Y scaling the same Keep the aspect ratio Make the image fit within the size of the frame Use image proportions rather than those of the frame Source profile of the image Rendering intent for the image &X1: X&2: Y&1: &Y2: Column width None Kosong Warning Peringatan Name "%1" isn't unique. Please choose another. Nama "%1" tidak unik. Silakan pilih nama lain. OK OK Right to Left Writing Start Arrow: End Arrow: Fixed Linespacing Automatic Linespacing Align to Baseline Grid Actual X-DPI: Actual Y-DPI: Offset to baseline of characters Scaling height of characters Manual Tracking Name "%1" isn't unique.<br/>Please choose another. Fill Rule Even-Odd Non Zero Overprinting Knockout Overprint Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color. Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color. Click to select the line spacing mode Gap: Width: Lebar: Text &Flow Around Frame Disabled Use Frame &Shape Image Effects Extended Image Properties Disable text flow from lower frames around object Use the frame shape for text flow of text frames below the object. Use the bounding box, which is always rectangular, instead of the frame's shape for text flow of text frames below the object. Use a second line originally based on the frame's shape for text flow of text frames below the object. Transparency Settings &Group Opacity: Blend Mode: Normal Normal Darken Lighten Multiply Screen Overlay Hard Light Soft Light Difference Exclusion Color Dodge Color Burn Hue Color Warna Group the selected objects Destroys the selected group MultiLine Edit Style Edit Gaya Flat Cap Square Cap Round Cap Miter Join Bevel Join Round Join Line Width: Lebar Garis: pt % pt Solid Line Garis Solid Dashed Line Garis Putus-putus Dotted Line Garis Titik-titik Dash Dot Line Garis Putus Titik Dash Dot Dot Line Garis Putus Titik Titik Warning Peringatan Name "%1" isn't unique. Please choose another. Nama "%1" tidak unik. Silakan pilih nama lain. OK OK Name "%1" isn't unique.<br/>Please choose another. MultiProgressDialogBase Progress Overall Progress: &Cancel MultipleDuplicate &Horizontal Shift: &Vertical Shift: &Horizontal Gap: &Vertical Gap: MultipleDuplicateBase Multiple Duplicate Penyalinan Banyak &By Number of Copies &Number of Copies: Create &Gap Between Items Of Alt+G &Shift Created Items By Alt+S &Horizontal Shift: &Vertical Shift: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Number of Columns: &OK &Cancel MusterPages Edit Templates Edit Template Warning Peringatan New Template Template Baru Name: Nama: Normal Normal MusterSeiten Edit Templates Edit Template &Close &Tutup Warning Peringatan New Template Template Baru Name: Nama: Normal Normal MyPlugin My &Plugin MyPluginImpl Scribus - My Plugin The plugin worked! NewDoc New Document Dokumen Baru Page Size Ukuran Halaman &Size: Tabloid Tabloid Custom Atur Sendiri Orie&ntation: Portrait Tegak Landscape Datar &Width: &Height: Margin Guides Pemandu Gari Tepi Options Pilihan &Default Unit: Points (pts) Point (pts) Inches (in) Inci (in) Picas (p) Picas (p) &Automatic Text Frames Column Guides Pemandu Kolom &Gap: Colu&mns: Document page size, either a standard size or a custom size Orientation of the document's pages Width of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Default unit of measurement for document editing Create text frames automatically when new pages are added Number of columns to create in automatically created text frames Distance between automatically created columns Do not show this dialog again Initial number of pages of the document N&umber of Pages: Open Buka &New Document Open &Existing Document Open Recent &Document NewFromTemplatePlugin New &from Template... Load documents with predefined layout Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). NewTm Left Page Halaman Kiri Right Page Halaman Kanan NodePalette Nodes Node &Absolute Coordinates &X-Pos: &Y-Pos: Edit &Contour Line &Reset Contour Line &End Editing Move Nodes Pindahkan Node Move Control Points Pindahkan Titik Kontrol Add Nodes Tambahkan Node Delete Nodes Hapus Node Move Control Points Independently Move Control Points Symmetrical Reset Control Points Reset Titik Kontrol Reset this Control Point Open a Polygon or Cuts a Bezier Curve Close this Bezier Curve Mirror the Path Horizontally Mirror the Path Vertically Shear the Path Horizontally to the Right Shear the Path Horizontally to the Left Shear the Path Vertically Up Shear the Path Vertically Down Rotate the Path Counter-Clockwise Rotate the Path Clockwise Enlarge the Size of the Path by shown % Angle of Rotation Activate Contour Line Editing Mode Reset the Contour Line to the Original Shape of the Frame % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By Value to Enlarge or Shrink By OODPlug This document does not seem to be an OpenOffice Draw file. OODrawImportPlugin Import &OpenOffice.org Draw... Imports OpenOffice.org Draw Files Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenOffice.org 1.x Draw Import/export format name OdtDialog OpenDocument Importer Options Overwrite Paragraph Styles Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Use document name as a prefix for paragraph styles Prepend the document name to the paragraph style name in Scribus. Do not ask again Make these settings the default and do not prompt again when importing an OASIS OpenDocument. OK OK Cancel Batal OldScribusFormat Scribus Document Scribus 1.2.x Document OutlineValues % Linewidth PDFExportDialog Save as PDF O&utput to File: Cha&nge... Output one file for eac&h page &Save Save as Simpan sebagai PDF Files (*.pdf);;All Files (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. %1 does not exists and will be created, continue? Cannot create directory: %1 PDFToolBar PDF Tools PDF_Opts Export Range Ekspor Cakupan File Options Pilihan File Left Margin Margin Kiri Right Margin Margin Kanan None Kosong Medium Sedang Embedding Memasukkan Available Fonts: Font yang Tersedia: Fonts to embed: Font yang dimasukkan: Page Halaman Effects Efek No Effect Tidak ada Efek Blinds Berkedip Box Kotak Dissolve Pecahkan Split Pisahkan Wipe Seka Horizontal Horisontal Vertical Vertikal Inside Di Dalam Outside Di Luar Left to Right Kiri ke Kanan Top to Bottom Atas ke Bawah Bottom to Top Bawah ke Atas Right to Left Kanan ke Kiri Passwords Katakunci Settings Pengaturan General Umum Printer Printer Line Garis Solid Colors: Warna Solid: Rendering-Intent: Intensitas Rendering Relative Colorimetric Colorimetric Relatif Saturation Saturasi Absolute Colorimetric Colorimetric Absolut Images: Gambar: Save as Simpan sebagai PDFlib Saving PDF Exporting Items on Current Page: Exporting Master Page: Exporting Page: PPreview Print Preview Tampilan Prapandang Display Trans&parency &Under Color Removal &Display CMYK &C &M &Y &K Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Enable/disable the C (Cyan) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the K (Black) ink plate All Semua Warning Peringatan Separation Name Cyan Magenta Yellow Black Scaling: Print... Cetak... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. Close Tutup File Berkas Force Overprint Mode Enable &Antialiasing Fit to Width Fit to Height Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings Print Settings Mirror Page(s) Horizontal Mirror Page(s) Vertical Clip to Page Margins Print in Grayscale Convert Spot Colors Apply ICC Profiles Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables global Overprint Mode for this document, overrides object settings Allows you to embed ICC profiles in the print stream when color management is enabled PSLib Processing Master Page: Exporting Page: PStyleWBase Form1 Properties Properti Parent Distances and Alignment Drop Caps Parent's Drop Cap Status Tabulators and Indentation Ch&aracter Style Page Copy Here Salin ke Sini Move Here Pindah ke Sini Cancel Batal Text Frame Frame Teks Enabled Bolehkan None Kosong Warning Peringatan PageItem Image Gambar Text Teks Line Garis Polygon Poligon Polyline PathText Copy of PageItemAttributes None Kosong Relates To Is Parent Of Is Child Of Type Tipe None relationship Kosong PageItemAttributesBase Page Item Attributes Name Type Tipe Value Parameter Relationship Relationship To &Add Alt+A &Copy Alt+C &Delete Alt+D C&lear Alt+L &OK &Cancel PageLayouts Page Layout First Page is: PagePalette Double sided Middle Right Drag pages or master pages onto the trashbin to delete them Here are all your master pages. To create a new page, drag a master page to the page view below Normal Normal Arrange Pages Susun Halaman Available Master Pages: Document Pages: Halaman Dokumen: PageSelector %1 of %2 %1 of %1 PageSize Medium Sedang PatternDialog Choose a Directory Pilih Direktori Loading Patterns All Files (*) Open Buka PicSearch Result Hasil Search Results for: Hasil Pencarian untuk: Preview Prapandang Select Pilih Cancel Batal PicSearchBase Result Hasil Search Results for: Hasil Pencarian untuk: &Preview Alt+P &Select Alt+S PicStatus Pictures Gambar Name Path Lokasi Page Halaman Print Cetak Status Status Goto Pergi ke Yes Ya OK OK Missing Hilang Search Cari Cancel Search Manage Pictures Manajemen Gambar Scribus - Image Search The search failed: %1 No images named "%1" were found. Select a base directory for search Search Directory Close Tutup Set a new location for the selected items. Useful when you may have moved the document but not the images. Select a base directory for your selected rows Case insensitive search The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows PixmapExportPlugin Save as &Image... Export As Image Exports selected pages as bitmap images. Save as Image Error writing the output file(s). Export successful PluginManager Cannot find plugin plugin manager unknown error plugin manager Cannot find symbol (%1) plugin manager Import plugin manager Impor Plugin: loading %1 plugin manager init failed plugin load error unknown plugin type plugin load error Plugin: %1 loaded plugin manager Plugin: %1 failed to load: %2 plugin manager Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Plugin How to run Type Tipe Load it? Plugin ID File Berkas Yes Ya No Tidak You need to restart the application to apply the changes. PolygonProps Polygon Properties Properti Poligon PolygonWidget Corn&ers: &Rotation: Apply &Factor % &Factor: Number of corners for polygons Degrees of rotation for polygons Apply Convex/Concave Factor to change shape of Polygons Sample Polygon A negative value will make the polygon concave (or star shaped), a positive value will make it convex Preferences Preferences Preferensi General Umum Document Dokumen Guides Pemandu Typography Tools Alat bantu Scrapbook Scrapbook Display Tampilan GUI GUI Units Satuan Points (pt) Point (pt) Inches (in) Inci (in) Picas (p) Picas (p) Page Size Ukuran Halaman Custom Atur Sendiri Portrait Tegak Landscape Datar Margin Guides Pemandu Gari Tepi Autosave Simpan otomatis Grid Layout Layout Grid Grid Colors Warna Grid Placing Peletakan Other Lainnya None Kosong Other Options Pilihan Lain Preview Prapandang Small Kecil Medium Sedang Choose a Directory Pilih Direktori Hyphenator Fonts Color Management PDF Export Keyboard Shortcuts Plugins Preflight Verifier Document Item Attributes Table of Contents and Indexes External Tools Miscellaneous Type Tipe Yes Ya PrefsDialogBase &Defaults Save Preferences Export... &Apply All preferences can be reset here Apply all changes without closing the dialog Export current preferences into file PrefsManager Left Page Halaman Kiri Right Page Halaman Kanan Postscript Migrate Old Scribus Settings? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? PostScript Could not open preferences file "%1" for writing: %2 Writing to preferences file "%1" failed: QIODevice status code %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 PDF 1.3 PDF 1.4 PDF/X-3 Error Writing Preferences Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. PresetLayout None Kosong Magazine Fibonacci Golden Mean Nine Parts Gutenberg None layout type Kosong You can select a predefined page layout here. 'None' leave margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins for same value. Leading is Left/Inside value. PythonConsole &Open... &Save Save &As... &Exit &File &Run Run As &Console &Save Output... &Script Scribus Python Console This is derived from standard Python console so it contains some limitations esp. in the case of whitespaces. Please consult Scribus manual for more informations. Script Console Write your commands here. A selection is processed as script Output of your script Save the Python Commands in File Warning Peringatan Text Files (*.txt) Save Current Output Open Python Script File Python Scripts (*.py *.PY) Line: %1 Column: %2 QColorDialog Hu&e: &Sat: &Val: &Red: Me&rah: &Green: Hi&jau: Bl&ue: Bir&u: A&lpha channel: &Basic colors &Warna Dasar &Custom colors Warna sendi&ri &Define Custom Colors >> &Tentukan Warna Sendiri >> OK OK Cancel Batal &Add to Custom Colors Select color Pilih warna QFileDialog Copy or Move a File Read: %1 Write: %1 File &name: &Nama File: File &type: &Tipe File: One directory up Naik satu direktori Cancel Batal All Files (*) Name Size Ukuran Type Tipe Date Tanggal Attributes OK OK Look &in: L&ihat di: Back Create New Folder Buat Folder Baru List View Tampilan Daftar Detail View Tampilan Detail Preview File Info Preview File Contents Prapandang Isi File Read-write Read-only Write-only Inaccessible Symlink to File Symlink to Directory Symlink to Special File Berkas Dir Special Open Buka Save As &Open &Save &Rename &Delete R&eload Sort by &Name Sort by &Size Sort by &Date &Unsorted Sort Show &hidden files the file the directory the symlink Delete %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> New Folder 1 New Folder New Folder %1 Find Directory Directories Save Simpan Error %1 File not found. Check path and filename. All Files (*.*) Select a Directory Directory: QFontDialog &Font &Font Font st&yle Ga&ya Font &Size U&kuran Effects Efek Stri&keout Stri&keout &Underline &Garis bawah &Color Sample Contoh Scr&ipt Skr&ip OK OK Apply Terapkan Cancel Batal Close Tutup Select Font Pilih Font QLineEdit Clear Bersihkan Select All &Undo &Redo Cu&t &Copy &Paste QMainWindow Line up Customize... QMessageBox <h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for multiplatform GUI &amp; application development.</p><p>Qt provides single-source portability across MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, and all major commercial Unix variants.<br>Qt is also available for embedded devices.</p><p>Qt is a Trolltech product. See <tt>http://www.trolltech.com/qt/</tt> for more information.</p> QObject Importing text All Supported Formats All Files (*) Initializing... Document Dokumen Background Latar Belakang Warning Peringatan Do you really want to overwrite the File: %1 ? Apakah anda benar-benar ingin menimpa File: %1 ? Newsletters Brochures Catalogs Flyers Signs Cards Letterheads Envelopes Business Cards Calendars Advertisements Labels Menus Programs PDF Forms PDF Presentations Magazines Posters Announcements Text Documents Folds Own Templates No Tidak Yes Ya Print Preview Tampilan Prapandang All Supported Formats (*.eps *.EPS *.ps *.PS);; Open Buka Save as Simpan sebagai SVG-Images (*.svg *.svgz);;All Files (*) SVG-Images (*.svg);;All Files (*) Comma Separated Value Files CSV_data CSV_header HTML Files html External Links Text Files Font %1 is broken, discarding it Text Filters Media Cases Albanian Basque Bulgarian Catalan Chinese Czech Danish Dutch English Inggris English (British) Esperanto German Jerman Finnish French Perancis Galician Greek Hungarian Indonesian Italian Italia Korean Lithuanian Norwegian (Nnyorsk) Norwegian Polish Russian Rusia Swedish Spanish Spanyol Spanish (Latin) Slovak Slovakia Slovenian Serbian Cannot get font size of non-text frame. python error Cannot get font of non-text frame. python error Cannot get text size of non-text frame. python error Cannot get column count of non-text frame. python error Cannot get line space of non-text frame. python error Cannot get column gap of non-text frame. python error Cannot get text of non-text frame. python error Cannot set text of non-text frame. python error Cannot insert text into non-text frame. python error Alignment out of range. Use one of the scribus.ALIGN* constants. python error Selection index out of bounds python error Unit out of range. Use one of the scribus.UNIT_* constants. python error Target is not an image frame. python error Corner radius must be a positive number. python error Cannot get a color with an empty name. python error Cannot change a color with an empty name. python error Cannot create a color with an empty name. python error Cannot delete a color with an empty name. python error Cannot replace a color with an empty name. python error OpenOffice.org Writer Documents Color not found - python error python error Custom (optional) configuration: short words plugin Standard configuration: short words plugin Short Words processing. Wait please... short words plugin Short Words processing. Done. short words plugin Afrikaans Turkish Ukranian Welsh The filename must be a string. python error Cannot delete image type settings. python error The image type must be a string. python error 'allTypes' attribute is READ-ONLY python error Failed to export image python error Cannot scale by 0%. python error Specified item not an image frame. python error Font not found. python error Cannot render an empty sample. python error Cannot have an empty layer name. python error Layer not found. python error Cannot remove the last layer. python error Cannot create layer without a name. python error Insert index out of bounds. python error Cannot set text alignment on a non-text frame. python error Font size out of bounds - must be 1 <= size <= 512. python error Cannot set font size on a non-text frame. python error Cannot set font on a non-text frame. python error Line space out of bounds, must be >= 0.1. python error Cannot set line spacing on a non-text frame. python error Column gap out of bounds, must be positive. python error Cannot set column gap on a non-text frame. python error Column count out of bounds, must be > 1. python error Cannot set number of columns on a non-text frame. python error Cannot select text in a non-text frame python error Cannot delete text from a non-text frame. python error Cannot set text fill on a non-text frame. python error Cannot set text stroke on a non-text frame. python error Cannot set text shade on a non-text frame. python error Can only link text frames. python error Target frame must be empty. python error Target frame links to another frame. python error Target frame is linked to by another frame. python error Source and target are the same object. python error Cannot unlink a non-text frame. python error Cannot convert a non-text frame to outlines. python error Page Halaman Custom Atur Sendiri Scribus Development Version pt mm in p pt mm in p Points (pt) Point (pt) Inches (in) Inci (in) Picas (p) Picas (p) File exists &Replace All Semua Failed to open document. python error Failed to save document. python error Argument must be page item name, or PyCObject instance Property not found Child not found Couldn't convert result type '%1'. Property type '%1' not supported Couldn't convert '%1' to property type '%2' Types matched, but setting property failed. Unable to save pixmap scripter error An object with the requested name already exists. python error Point list must contain at least two points (four values). python error Point list must contain an even number of values. python error Point list must contain at least three points (six values). python error Point list must contain at least four points (eight values). python error Point list must have a multiple of six values. python error Object not found. python error Style not found. python error Cannot set style on a non-text frame. python error Failed to save EPS. python error Page number out of range. python error argument is not list: must be list of float values. python error argument contains non-numeric values: must be list of float values. python error argument contains no-numeric values: must be list of float values. python error Line width out of bounds, must be 0 <= line_width <= 12. python error Line shade out of bounds, must be 0 <= shade <= 100. python error Fill shade out of bounds, must be 0 <= shade <= 100. python error Line style not found. python error Object is not a linked text frame, can't unlink. python error Object the last frame in a series, can't unlink. Unlink the previous frame instead. python error Only text frames can be checked for overflowing python error &Execute Script... Show &Console &About Script... &Script &Scribus Scripts &Recent Scripts About Script Croatian Portuguese Portuguese (BR) Scribus Crash Scribus crashes due to Signal #%1 &OK Master Page 4A0 2A0 Comm10E DLE Could not open output file %1 Output stream not writeable Verification of settings failed: %1 Could not open input file %1 Unable to read settings XML: %1 (line %2 col %3) Load PDF settings Unable to read settings XML: %1 null root node Load PDF settings <pdfVersion> invalid Load PDF settings found %1 <%2> nodes, need 1. Load PDF settings unexpected null <%2> node Load PDF settings node <%1> not an element Load PDF settings element <%1> lacks `value' attribute Load PDF settings element <%1> value must be `true' or `false' Load PDF settings element <lpiSettingsEntry> lacks `name' attribute Load PDF settings Freetype2 library not available Font %1 is broken (read stream), no embedding Font %1 has broken glyph %2 (charcode %3) Font %1 cannot be read, no embedding Failed to load font %1 - font type unknown Font %1 loaded from %2(%3) Font %1(%2) is duplicate of %3 Loading font %1 (found using fontconfig) Failed to load a font - freetype2 couldn't find the font file extracting face %1 from font %2 (offset=%3, nTables=%4) memcpy header: %1 %2 %3 table '%1' memcpy table: %1 %2 %3 memcpy offset: %1 %2 %3 cm c cm c Millimeters (mm) Centimeters (cm) Cicero (c) page page export Document Template: Color not found. python error Color not found in document. python error Color not found in default colors. python error Cannot group less than two items python error Can't group less than two items python error Need selection or argument list of items to group python error Can't set bookmark on a non-text frame python error Can't get info from a non-text frame python error The filename should not be empty string. python error Scribus Python interface module This module is the Python interface for Scribus. It provides functions to control scribus and to manipulate objects on the canvas. Each function is documented individually below. A few things are common across most of the interface. Most functions operate on frames. Frames are identified by their name, a string - they are not real Python objects. Many functions take an optional (non-keyword) parameter, a frame name. Many exceptions are also common across most functions. These are not currently documented in the docstring for each function. - Many functions will raise a NoDocOpenError if you try to use them without a document to operate on. - If you do not pass a frame name to a function that requires one, the function will use the currently selected frame, if any, or raise a NoValidObjectError if it can't find anything to operate on. - Many functions will raise WrongFrameTypeError if you try to use them on a frame type that they do not make sense with. For example, setting the text color on a graphics frame doesn't make sense, and will result in this exception being raised. - Errors resulting from calls to the underlying Python API will be passed through unaltered. As such, the list of exceptions thrown by any function as provided here and in its docstring is incomplete. Details of what exceptions each function may throw are provided on the function's documentation, though as with most Python code this list is not exhaustive due to exceptions from called functions. OpenDocument Text Documents Copy #%1 of Black Cyan Magenta Yellow Color Wheel Font Preview My Plugin New From Template PS/EPS Importer Save As Template Scripter Short Words SVG Export SVG Import OpenOffice.org Draw Importer Scribus crashes due to the following exception : %1 Creating Font Cache New Font found, checking... Modified Font found, checking... Reading Font Cache Writing updated Font Cache Searching for Fonts Mencari Font The changes to your document have not been saved and you have requested to revert them. Do you wish to continue? A file named '%1' already exists.<br/>Do you want to replace it with the file you are saving? firstPageOrder is bigger than allowed. python error Old .sla format support German (Trad.) Exporting PostScript File Printing File <p>You are trying to import more pages than there are available in the current document counting from the active page.</p>Choose one of the following:<br><ul><li><b>Create</b> missing pages</li><li><b>Import</b> pages until the last page</li><li><b>Cancel</b></li></ul> C&reate &Import Thai Barcode Generator OpenOffice.org Draw (*.sxd *.odg);;All Files (*) Word Documents Palm PDB Documents PDB Importer PDB_data PDB Importer PDB Import PDB Importer Could not open file %1 PDB Importer Luxembourgish Japanese Font %1(%2) is broken Given master page name does not match any existing. python error Arabic Dzongkha Estonian font %1 size %1 +style +color +underline -underline +strikeout -strikeout +shadow -shadow +outline -outline -tracking +stretch parent= %1 Font %1 is broken (no Face), discarding it Latin Icelandic Norwegian (Bokmål) Romanian Quarto Foolscap Letter Govt. Letter Legal Ledger Executive Post Crown Large Post Demy Medium Sedang Royal Elephant Double Demy Quad Demy STMT A B C D E %1 may be corrupted : missing resolution tags Font %1 has broken glyph %2 Transparency out of bounds, must be 0 <= transparency <= 1. python error Blendmode out of bounds, must be 0 <= blendmode <= 15. python error Scribus 1.2.x Support Scribus 1.3.4 Support Scribus 1.3.0->1.3.3.2 Support This file is not recognized as a PDB document. Please, report this as a bug if you are sure it is one. PDB Importer Cannot get number of lines of non-text frame. python error You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation? +tracking %1 +baseline %1 Breton English (American) %1 may be corrupted : missing or wrong resolution tags The Font(s): %1 are not available. They have been replaced by "Courier" Therefore the image may be not correct QTextEdit Clear Bersihkan Select All &Undo &Redo Cu&t &Copy &Paste QTitleBar System Menu Menu Sistem Shade Tingkat Kegelapan Unshade Normalize Minimize Minimalkan Maximize Maksimalkan Close Tutup QWorkspace &Restore &Kembalikan &Move &Pindahkan &Size U&kuran Mi&nimize Mi&nimalkan Ma&ximize Maksi&malkan &Close &Tutup Stay on &Top Minimize Minimalkan Restore Down Close Tutup Sh&ade %1 - [%2] &Unshade ReformDoc Document Setup Pengaturan Dokumen Margin Guides Pemandu Gari Tepi Page Size Ukuran Halaman Size: Ukuran: Custom Atur Sendiri Orientation: Orientasi: Portrait Tegak Landscape Datar Width: Lebar: Height: Tinggi: Document Dokumen Guides Display Typography Tools Alat bantu Hyphenator Fonts PDF Export Color Management Document Information Preflight Verifier Document Item Attributes Table of Contents and Indexes None Kosong Adjusting Colors Mengatur Warna Sections RunScriptDialog Run as Extension Script run script dialog Python Scripts (*.py *.PY);; All Files (*) SMAlignSelect P P as in Parent Use parent style's alignment instead of overriding it SMBase Style Manager Alt+A &Delete Alt+D Name: Nama: Alt+N &Apply name shortcut &New &Clone Alt+C &Import Alt+I Please select a unique name for the style << &Done &Reset Alt+R SMCStylePage pt % Parent SMCharacterStyle Properties Properti Character Styles Character Style New Style Clone of %1 %1 (%2) This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2) SMColorCombo Use Parent Value SMFontComboH Use Parent Font SMLineStyle Properties Properti Line Styles Line Style New Style Clone of %1 %1 (%2) This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2) pt Solid Line Dashed Line Dotted Line Dash Dot Line Dash Dot Dot Line pt SMPStyleWidget Fixed Linespacing Automatic Linespacing Align to Baseline Grid pt Parent Distances and Alignment Drop Caps Tabulators and Indentation Properties Properti Character Style &Lines: Distance from Text: Based on Parent's Character Style SMParagraphStyle Paragraph Styles Paragraph Style New Style Clone of %1 %1 (%2) This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2) SMReplaceDia Remove Replace with SMReplaceDiaBase Delete Styles &OK Ca&ncel Alt+N SMRowWidget No Style SMScComboBox Use Parent Value SMShadeButton Use Parent Value SMStyleSelect P P as in Parent Use parent style's effects instead of overriding them SMTabruler Parent Tabs SToolBAlign Style Settings Style of current paragraph SToolBColorF Fill Color Settings None Kosong Color of text fill Saturation of color of text fill SToolBColorS Stroke Color Settings None Kosong Color of text stroke Saturation of color of text stroke SToolBFont Font Settings pt % Font of selected text Font Size Ukuran Font Scaling width of characters Scaling height of characters SToolBStyle Character Settings Pengaturan Karakter Manual Kerning Penonjolan Manual % Manual Tracking SVGExportPlugin Exports SVG Files Exports the current page into an SVG file. Save as &SVG... SVGImportPlugin Import &SVG... Imports SVG Files Imports most SVG files into the current document, converting their vector data into Scribus objects. Scalable Vector Graphics SVG file contains some unsupported features SVGPlug Group%1 SWDialog Short Words short words plugin Apply unbreakable space on: short words plugin &Selected frames short words plugin Active &page short words plugin &All items short words plugin Only selected frames processed. short words plugin Only actual page processed. short words plugin All items in document processed. short words plugin SWPrefsGui User settings System wide configuration &Save &Reset Save user configuration Reload system wide configuration and remove user defined one Edit custom configuration. If you save it, it will be used over system wide configuration Short Words User configuration exists elready. Do you really want to overwrite it? Cannot write file %1. User settings saved System wide configuration reloaded Cannot open file %1 SaveAsTemplatePlugin Save as &Template... Save a document as a template Save a document as a template. Good way to ease the initial work for documents with a constant look ScGTFileDialog Select a file to import Append Show options ScInputDialog Input Dialog InputDialog &OK &Cancel ScPlugin Persistent plugin manager plugin type Import plugin manager plugin type Impor Action plugin manager plugin type Aksi Load/Save/Import/Export Unknown ScProgressBar %1 of %2 ScToolBar Top Right Bottom Left Allow Docking To... Horizontal Horisontal Vertical Vertikal Floating Orientation... ScWinPrint Printing... Mencetak... ScriXmlDoc Background Latar Belakang Scribus12Format Scribus 1.2.x Document Background Latar Belakang Copy #%1 of Scribus134Format Scribus 1.3.4 Document Copy #%1 of Scribus13Format Scribus 1.3.0->1.3.3.2 Document Copy #%1 of ScribusApp Normal Normal File Berkas Searching for Fonts Mencari Font There are no Postscript-Fonts on your System Tidak ada Font Postscript pada Sistem anda Exiting now Keluar sekarang Fatal Error Kesalahan Fatal Align Left Bariskan di Kiri Align Right Bariskan di Kanan Align Center Bariskan di Tengah Attach Text to Path Masukkan Teks ke Path Show Layers Tampilkan Layer Undo Batal Show Page Palette Tampilkan Palet Halaman Reading Preferences Membaca Preferensi Setting up Shortcuts Mengatur Shortcut Reading Scrapbook Membaca Scrapbook Initializing Plugins Inisialisasi Plugin New Baru Open... Buka... &Close &Tutup Close Tutup Save Simpan Save as... Simpan sebagai... Document Info... Informasi Dokumen... Document Setup... Pengaturan Dokumen... Print... Cetak... Quit Keluar Cut Cut Copy Salin Paste Tempel Clear Bersihkan Select all Pilih semua Colors... Warna... Styles... Gaya... Templates... Template... Duplicate Salin Multiple Duplicate Penyalinan Banyak Delete Hapus Group Grup Send to Back Bawa ke Belakang Bring to Front Bawa ke Depan Lower Turunkan Raise Naikkan Distribute/Align... Sebar/Bariskan... Insert... Masukkan... Delete... Hapus... Move... Pindah... Apply Template... Terapkan Template... Manage Guides... Atur Pemandu... Fit in Window Pas di Window Thumbnails Thumbnail Hide Margins Sembunyikan Garis Tepi Hide Frames Sembunyikan Frame Hide Images Sembunyikan Gambar Show Grid Tampilkan Grid Snap to Grid Dekatkan ke Grid Properties Properti Outline Outline Scrapbook Scrapbook Manage Pictures Manajemen Gambar Tools Alat bantu Fonts... Font... About Scribus Tentang Scribus About Qt Tentang Qt Online-Help... Bantuan Online... Underline Garis Bawah Strikethru Coret Ready Siap None Kosong Get Text/Picture... Ambil Teks/Gambar... Get Picture... Ambil Gambar... &Font &Font &Size U&kuran Get Text... Ambil Teks... Font Font Size Ukuran Style Gaya Color Warna Shade Tingkat Kegelapan Open Buka Import Impor Warning Peringatan OK OK Loading... Memuat... Can't write the File: %1 Tidak dapat menulis ke File: %1 Save as Simpan sebagai Printing... Mencetak... Document Dokumen Printing failed! Pencetakan gagal! Scribus Manual Manual Scribus The following Programs are missing: Program berikut ini tidak ditemukan: All Semua Cancel Batal Unlock Buka Kunci Lock Kunci Loading: Memuat: Adjusting Colors Mengatur Warna German Jerman English Inggris Spanish Spanyol Italian Italia French Perancis Russian Rusia Slovak Slovakia Choose a Directory Pilih Direktori Invert Balik Name: Nama: ScribusColorList Color Warna None Kosong ScribusCore Initializing Plugins Inisialisasi Plugin Initializing Keyboard Shortcuts Reading Preferences Membaca Preferensi Reading ICC Profiles Searching for Fonts Mencari Font There are no fonts found on your system. Exiting now. Fatal Error Kesalahan Fatal Font System Initialized ScribusDoc New Layer Layer Baru Normal Normal Document Dokumen Background Latar Belakang Do you really want to clear all your text? Cannot Delete In-Use Item The item %1 is currently being edited by Story Editor. The delete operation will be cancelled Some objects are locked. &Unlock All &Skip locked objects An error occurred while opening ICC profiles, color management is not enabled. Number of copies: %1 Horizontal shift: %2 Vertical shift: %3 Number of copies: %1 Horizontal gap: %2 Vertical gap: %3 Adjusting Colors Mengatur Warna ScribusMainWindow None Kosong Initializing Plugins Inisialisasi Plugin Reading Preferences Membaca Preferensi Initializing Story Editor Initializing Hyphenator Reading Scrapbook Membaca Scrapbook Setting up Shortcuts Mengatur Shortcut File Berkas Edit Searching for Fonts Mencari Font Fatal Error Kesalahan Fatal &File Open &Recent &Import &Export &Edit St&yle &Color &Size U&kuran &Shade &Font &Font &Effects &Item Preview Settings Level Send to La&yer &PDF Options &Shape C&onvert To I&nsert Character Quote Space &Page &View E&xtras &Windows &Help &Alignment Ready Siap Open Buka Importing Pages... Import Page(s) Import done Found nothing to import File %1 is not in an acceptable format Loading... Memuat... PostScript Some ICC profiles used by this document are not installed: was replaced by: (converted) Cannot write the file: %1 Save As Saving... Scribus has detected some errors. Consider using the Preflight Verifier to correct them &Ignore &Abort Printing... Mencetak... Document Dokumen Printing failed! Pencetakan gagal! Cannot Cut In-Use Item The item %1 is currently being edited by Story Editor. The cut operation will be cancelled About Qt Tentang Qt Scribus Manual Manual Scribus Save as Simpan sebagai Text Files (*.txt);;All Files(*) Normal Normal Name: Nama: Convert Page to Master Page &Size: Size Ukuran &Shade: Shade Tingkat Kegelapan No Style The following programs are missing: Ghostscript : You cannot use EPS images or Print Preview All Semua Scribus detected some errors. Consider using the Preflight Verifier to correct them. EPS Files (*.eps);;All Files (*) Detected some errors. Consider using the Preflight Verifier to correct them -Page%1 Some objects are locked. &Lock All &Unlock All Information The program %1 is already running! The program %1 is missing! The selected color does not exist in the document's color set. Please enter a name for this new color. Color Not Found The name you have selected already exists. Please enter a different name for this new color. &Level Send to Layer Previe&w Settings &Tools X-Pos: Y-Pos: New Master Page %1 Ghostscript : You cannot use EPS images or PostScript Print Preview Ghostscript is missing : Postscript Print Preview is not available Do you really want to replace your existing image? Contents &Character &Quote S&paces && Breaks Liga&ture Paste Recent Updating Pictures Documents (*.sla *.sla.gz);;All Files (*) Documents (*.sla);;All Files (*) Group%1 ScribusQApp Invalid argument: File %1 does not exist, aborting. Usage: scribus [option ... ] [file] Options: Print help (this message) and exit Uses xx as shortcut for a language, eg `en' or `de' List the currently installed interface languages Show information on the console when fonts are being loaded Do not show the splashscreen on startup Output version information and exit Use right to left dialog button ordering (eg. Cancel/No/Yes instead of Yes/No/Cancel) filename Use filename as path for user given preferences Installed interface languages for Scribus are as follows: To override the default language choice: scribus -l xx or scribus --lang xx, where xx is the language of choice. Scribus Version Scribus, Open Source Desktop Publishing Homepage Documentation Wiki Issues Stop the showing of the splashscreen on startup. Writes an empty file called .neversplash in ~/.scribus. Download a file from the Scribus website and show the latest available version. Display a console window ScribusView % All Semua Copy Here Salin ke Sini Move Here Pindah ke Sini Cancel Batal &Paste Picture File: Original PPI: Actual PPI: Linked Text Text Frame Frame Teks Text on a Path Paragraphs: Words: Chars: Print: Enabled Bolehkan Disabled In&fo &PDF Options Send to La&yer Le&vel Conve&rt to &Delete Warning Peringatan None Kosong Preview Settings Linking Text Frames You are trying to link to a filled frame, or a frame to itself. Cannot Convert In-Use Item The item %1 is currently being edited by Story Editor. The convert to outlines operation for this item will be skipped Page %1 to %2 Colorspace: Unknown RGB CMYK Grayscale Contents Paste Recent Duotone Lines: Group%1 Enables the Preview Mode Here you can select the visual appearance of the display You can choose between normal and several color blindness forms Normal Vision Protanopia (Red) Deuteranopia (Green) Tritanopia (Blue) Full Color Blindness Switches Color Management on or off ScribusWin Warning Peringatan Document: Dokumen: has been changed since the last save. telah dirubah sejak terakhir disimpan. &Discard ScriptPlugin Embedded Python scripting support. Scripter ScripterCore Script error If you are running an official script report it at <a href="http://bugs.scribus.net">bugs.scribus.net</a> please. This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker. There was an internal error while trying the command you entered. Details were printed to stderr. Examine Script Setting up the Python plugin failed. Error details were printed to stderr. Documentation for: Script doesn't contain any docstring! Python Scripts (*.py *.PY);;All Files (*) ScripterPrefsGui Scripter Preferences Enable Extension Scripts Extensions Console Startup Script: Errors: syntax highlighting Comments: syntax highlighting Keywords: syntax highlighting Signs: syntax highlighting Numbers: syntax highlighting Strings: syntax highlighting Base Texts: syntax highlighting Select Color Change... Ubah... Locate Startup Script SeList Show Page Previews Tampilkan Prapandang Halaman SeView Show Template Names Pilih Nama Template SearchReplace Search/Replace Search for: Text Teks Paragraph Style Font Font Font Size Ukuran Font Font Effects Fill Color Fill Shade Stroke Color Stroke Shade Left Kiri Center Tengah Right Kanan Block Blok Forced Paksakan pt None Kosong Replace with: &Whole Word &Ignore Case &Search &Replace Replace &All &Close &Tutup Search finished OK OK C&lear Search finished, found %1 matches SeitenPal Arrange Pages Susun Halaman Available Templates: Template yang Tersedia: Document Pages: Halaman Dokumen: Facing Pages Halaman Berhadapan Left Page first Halaman Kiri dahulu Drag Pages or Template Pages onto the Trashbin to delete them. Seret Halaman atau Template ke Tong Sampah untuk menghapusnya. Here are all your Templates, to create a new Page drag a Template to the Pageview below. Disini semua Template anda, untuk membuat Halaman baru Geser Template ke Tampilan Halaman di bawah ini. Normal Normal SelectFields Select Fields Pilih Field Available Fields Field yang Tersedia &>> &<< Selected Fields Field Terpilih ShadeButton Other... Lainnya... &Shade: Shade Tingkat Kegelapan ShadowValues % X-Offset Y-Offset ShortWordsPlugin Short &Words... short words plugin Short Words Special plug-in for adding non-breaking spaces before or after so called short words. Available in the following languages: ShortcutWidget &No Key &User Defined Key ALT+SHIFT+T Set &Key Alt Ctrl Shift Meta Meta+ Shift+ Alt+ Ctrl+ SideBar No Style Tanpa Gaya Edit Styles... Spalette No Style Tanpa Gaya StilFormate Edit Styles Edit Gaya &New &Edit D&uplicate &Delete Copy of %1 New Style Gaya Baru Warning Peringatan No Tidak Yes Ya Open Buka Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) &Import StoryEditor Story Editor &New &Reload Text from Frame &Save to File... &Load from File... Save &Document &Update Text Frame and Exit &Exit Without Updating Text Frame Select &All Cu&t &Copy &Paste C&lear &Search/Replace... &Edit Styles... &Fonts Preview... &Update Text Frame &Background... &Display Font... &File &Edit &Settings File Berkas Current Paragraph: Words: Chars: Totals: Paragraphs: Warning Peringatan Do you want to save your changes? Open Buka Text Files (*.txt);;All Files(*) Save as Simpan sebagai &Smart text selection &Insert Glyph... Clear All Text Story Editor - %1 Do you really want to lose all your changes? Do you really want to clear all your text? &Insert Character Quote Spaces && Breaks Ligature Space StrikeValues Auto % Displacement Linewidth StyleManager Name: Nama: &Reset &Apply << &Done &Edit >> &New &Import &Clone &Delete Reset all changes Apply all changes Apply all changes and exit edit mode Create a new style Import styles from another document Clone selected style Delete selected styles New Baru Import Impor Clone Send to Scrapbook Delete Hapus &Edit &Done Shortcut StyleSelect Underline Garis Bawah Small Caps Subscript Superscript Outline Outline All Caps Outline Text Style Selector Outline Underline Text. Hold down the button momentarily to set line width and displacement options. Underline Words Only. Hold down the button momentarily to set line width and displacement options. Strike Out. Hold down the button momentarily to set line width and displacement options. Outline. Hold down the button momentarily to change the outline stroke width. Text Style Selector Shadowed Text. Hold down the button momentarily to enable the offset spacing. SxwDialog Use document name as a prefix for paragraph styles Do not ask again OK OK OpenOffice.org Writer Importer Options Overwrite Paragraph Styles Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Prepend the document name to the paragraph style name in Scribus. Make these settings the default and do not prompt again when importing an OpenOffice.org 1.x document. Cancel Batal TOCIndexPrefs None Kosong At the beginning At the end Not Shown Table of Contents and Indexes Table Of Contents &Add Alt+A &Delete Alt+D The frame the table of contents will be placed into Page Numbers Placed: Item Attribute Name: The Item Attribute that will be set on frames used as a basis for creation of the entries Place page numbers of the entries at the beginning or the end of the line, or not at all List Non-Printing Entries Include frames that are set to not print as well The paragraph style used for the entry lines Paragraph Style: Destination Frame: TOCIndexPrefsBase Table of Contents and Indexes Table Of Contents &Add Alt+A &Delete Alt+D The frame the table of contents will be placed into Page Numbers Placed: Item Attribute Name: The Item Attribute that will be set on frames used as a basis for creation of the entries Place page numbers of the entries at the beginning or the end of the line, or not at all List Non-Printing Entries Include frames that are set to not print as well The paragraph style used for the entry lines Paragraph Style: Destination Frame: TabCheckDoc Ignore all errors Automatic check before printing or exporting Check for missing glyphs Check for objects not on a page Check for overflow in text frames Check for transparencies used Check for missing images Check image resolution Lowest allowed resolution dpi Check for PDF Annotations and Fields Add Profile Remove Profile Check for placed PDF Files Highest allowed resolution Check for GIF images Ignore non-printable Layers TabDisplay Color for paper Mask the area outside the margins in the margin color Enable or disable the display of linked frames. Display non-printing characters such as paragraph markers in text frames Turns the display of frames on or off Turns the display of layer indicators on or off Turns the display of pictures on or off Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Set the default zoom level Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size TabDisplayBase Form2 Page Display Show Layer Indicators Show Frames Show Text Chains Display &Unprintable Area in Margin Color Alt+U Rulers Relative to Page Show Text Control Characters Show Pictures Scratch Space &Left: &Right: &Bottom: &Top: Gaps Between Pages Horizontal: Vertical: Adjust Display Size To adjust the display drag the ruler below with the slider. textLabel16 General Umum Colors Warna Pages: Fill Color: Selected Page Border: Frames Locked: Normal: Selected: Linked: Grouped: Annotation: Text: Control Characters: TabDocument Custom Atur Sendiri Page Size Ukuran Halaman &Size: Portrait Tegak Landscape Datar Orie&ntation: Units: &Width: &Height: Margin Guides Pemandu Gari Tepi Autosave Simpan otomatis min &Interval: Undo/Redo Action history length Width of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Default page size, either a standard size or a custom size Default orientation of document pages Default unit of measurement for document editing When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Time period between saving automatically Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Apply the page size changes to all existing pages in the document Apply settings to: All Document Pages All Master Pages Apply the page size changes to all existing master pages in the document TabExternalToolsWidget Locate Ghostscript Locate your image editor Locate your web browser TabExternalToolsWidgetBase External Tools PostScript Interpreter &Name of Executable: &Change.. Alt+C Antialias &Text Alt+T Antialias text for EPS and PDF onscreen rendering Antialias &Graphics Alt+G Antialias graphics for EPS and PDF onscreen rendering Resolution: dpi Image Processing Tool Name of &Executable: &Change... &Rescan Alt+R <qt>Add the path for the Ghostscript interpreter. On Windows, please note it is important to note you need to use the program named gswin32c.exe - NOT gswin32.exe. Otherwise, this maybe cause a hang when starting Scribus.</qt> <qt>File system location for graphics editor. If you use gimp and your distribution includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp.</qt> Web Browser Web Browser to launch with links from the Help system <qt>File system location for your web browser. This is used for external links from the Help system.</qt> Rescan for the external tools if they do not exist in the already specified location TabGeneral Select your default language for Scribus to run with. Leave this blank to choose based on environment variables. You can still override this by passing a command line option when starting Scribus Number of recently edited documents to show in the File menu Number of lines Scribus will scroll for each move of the mouse wheel Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Default font size for the menus and windows Default font size for the tool windows Default documents directory Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc Default Scripter scripts directory Additional directory for document templates Choose a Directory Pilih Direktori TabGeneralBase Form1 GUI GUI &Language: &Theme: Time before a Move or Resize starts: ms &Font Size (Menus): pt Font Size (&Palettes): &Wheel Jump: &Recent Documents: Paths &Documents: &Change... Alt+C &ICC Profiles: C&hange... Alt+H &Scripts: Ch&ange... Alt+A Document &Templates: Cha&nge... Alt+N User Interface Show Startup Dialog Show Splashscreen on Startup TabGuides Common Settings Placing in Documents In the Background In the Foreground Snapping Snap Distance: Grab Radius: px Show Guides Show Margins Show Page Grid Major Grid Color: Spacing: Minor Grid Show Baseline Grid Baseline &Grid: Baseline &Offset: Distance between the minor grid lines Distance between the major grid lines Distance within which an object will snap to your placed guides Radius of the area where Scribus will allow you to grab an objects handles Color of the minor grid lines Color of the major grid lines Color of the guide lines you insert Color for the margin lines Turns the basegrid on or off Turns the gridlines on or off Turns the guides on or off Turns the margins on or off Baseline Settings Guides are not visible through objects on the page Guides are visible above all objects on the page Color for the baseline grid Distance between the lines of the baseline grid Distance from the top of the page for the first baseline TabKeyboardShortcutsWidget Key Set XML Files (*.ksxml) Alt Ctrl Shift Meta Meta+ Shift+ Alt+ Ctrl+ This key sequence is already in use TabKeyboardShortcutsWidgetBase Keyboard Shortcuts Search: Action Aksi Shortcut Shortcut for Selected Action &No Key Alt+N &User Defined Key Alt+U Set &Key Alt+K CTRL+ALT+SHIFT+W Loadable Shortcut Sets Keyboard shortcut sets available to load &Load Alt+L Load the selected shortcut set &Import... Alt+I Import a shortcut set into the current configuration &Export... Alt+E Export the current shortcuts into an importable file &Reset Alt+R Reload the default Scribus shortcuts TabManager Manage Tabulators TabMiscellaneousBase Form1 Always ask before fonts are replaced when loading a document Preview of current Paragraph Style visible when editing Styles Lorem Ipsum Always use standard Lorem Ipsum Count of the Paragraphs: TabPDFOptions Export Range Ekspor Cakupan &All Pages C&hoose Pages &Rotation: File Options Pilihan File Compatibilit&y: &Binding: Left Margin Margin Kiri Right Margin Margin Kanan Generate &Thumbnails Save &Linked Text Frames as PDF Articles &Include Bookmarks dpi Com&press Text and Vector Graphics Automatic None Kosong Maximum High Medium Sedang Low Minimum &General &Embed all Fonts &Subset all Fonts Embedding Memasukkan Available Fonts: Font yang Tersedia: &>> &<< Fonts to embed: Font yang dimasukkan: Fonts to subset: &Fonts Enable &Presentation Effects Page Halaman Show Page Pre&views Effects Efek &Display Duration: Effec&t Duration: Effect T&ype: &Moving Lines: F&rom the: D&irection: sec No Effect Tidak ada Efek Blinds Berkedip Box Kotak Dissolve Pecahkan Glitter Split Pisahkan Wipe Seka Horizontal Horisontal Vertical Vertikal Inside Di Dalam Outside Di Luar Left to Right Kiri ke Kanan Top to Bottom Atas ke Bawah Bottom to Top Bawah ke Atas Right to Left Kanan ke Kiri Top-left to Bottom-Right &Apply Effect on all Pages E&xtras &Use Encryption Passwords Katakunci &User: &Owner: Settings Pengaturan Allow &Printing the Document Allow &Changing the Document Allow Cop&ying Text and Graphics Allow Adding &Annotations and Fields S&ecurity General Umum Output &Intended For: Screen / Web Printer Printer Grayscale &Use Custom Rendering Settings Rendering Settings Fre&quency: &Angle: S&pot Function: Simple Dot Line Garis Round Ellipse Solid Colors: Warna Solid: Use ICC Profile Profile: Rendering-Intent: Intensitas Rendering Perceptual Relative Colorimetric Colorimetric Relatif Saturation Saturasi Absolute Colorimetric Colorimetric Absolut Images: Gambar: Don't use embedded ICC profiles C&olor PDF/X-3 Output Intent &Info String: Output &Profile: Trim Box PDF/X-&3 Show page previews of each page listed above. Type of the display effect. Direction of the effect of moving lines for the split and blind effects. Starting position for the box and split effects. Direction of the glitter or wipe effects. Apply the selected effect to all pages. Export all pages to PDF Export a range of pages to PDF Generate PDF Articles, which is useful for navigating linked articles in a PDF. DPI (Dots Per Inch) for image export. Choose a password for users to be able to read your PDF. Allow printing of the PDF. If un-checked, printing is prevented. Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. Embed a color profile for solid colors Color profile for solid colors Rendering intent for solid colors Embed a color profile for images Do not use color profiles that are embedded in source images Color profile for images Rendering intent for images Output profile for printing. If possible, get some guidance from your printer on profile selection. Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Mirror Page(s) horizontally Mirror Page(s) vertically &Resolution for EPS Graphics: Convert Spot Colors to Process Colors Compression &Quality: Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied. Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Include La&yers Compression Metho&d: Resa&mple Images to: Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size. Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Choose a master password which enables or disables all the security features in your exported PDF This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Display Settings Page Layout Single Page Continuous Double Page Left Double Page Right Visual Appearance Use Viewers Defaults Use Full Screen Mode Display Bookmarks Tab Display Thumbnails Display Layers Tab Hide Viewers Toolbar Hide Viewers Menubar Zoom Pages to fit Viewer Window Special Actions No Script Viewer Clip to Page Margins Lossy - JPEG Lossless - Zip Image Compression Method Javascript to be executed when PDF document is opened: Enables presentation effects when using Adobe&#174; Reader&#174; and other PDF viewers which support this in full screen mode. Layers in your document are exported to the PDF Only available if PDF 1.5 is chosen. Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options. This only affects JPEG images Re-sample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. Enabling this will increase memory usage and slow down export. Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Choose Grayscale when you want a grey scale PDF. Do not show objects outside the margins in the exported file Force Overprint Mode Length of time the page is shown before the presentation starts on the selected page. Setting 0 will disable automatic page transition. Enables global Overprint Mode for this document, overrides object settings Determines the PDF compatibility.<br/>The default is <b>PDF 1.3</b> which gives the widest compatibility.<br/>Choose <b>PDF 1.4</b> if your file uses features such as transparency or you require 128 bit encryption.<br/><b>PDF 1.5</b> is necessary when you wish to preserve objects in separate layers within the PDF.<br/><b>PDF/X-3</b> is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer. TabScrapbookBase Form2 Send Copied Items Automatically to Scrapbook This enables the scrapbook to be used an extension to the copy/paste buffers. Simply copying an object or grouped object will send this to the Scrapbook automatically Keep Copied Items Permanently Across Sessions This enables copied items to be kept permanently in the scrapbook. Number of Copied Items to Keep in Scrapbook: The minimum number is 1; the maximum us 100. TabTools Font: pt Size: Ukuran: None Kosong Fill Color: Stroke Color: Colu&mns: &Gap: Woven silk pyjamas exchanged for blue quartz &Line Color: % &Shading: &Fill Color: S&hading: Line Style: Line &Width: Line S&tyle: Arrows: Start: End: &Free Scaling &Horizontal Scaling: &Vertical Scaling: &Scale Picture to Frame Size Keep Aspect &Ratio F&ill Color: Mi&nimum: Ma&ximum: &Stepping: Text Frame Properties Picture Frame Properties Shape Drawing Properties Magnification Level Defaults Line Drawing Properties Polygon Drawing Properties Font for new text frames Size of font for new text frames Color of font Number of columns in a text frame Gap between text frame columns Sample of your font Picture frames allow pictures to scale to any size Horizontal scaling of images Vertical scaling of images Keep horizontal and vertical scaling the same Pictures in picture frames are scaled to the size of the frame Automatically scaled pictures keep their original proportions Fill color of picture frames Saturation of color of fill Line color of shapes Saturation of color of lines Fill color of shapes Line style of shapes Line width of shapes Minimum magnification allowed Maximum magnification allowed Change in magnification for each zoom operation Color of lines Saturation of color Style of lines Width of lines Tab Fill Character: Tab Width: Use embedded Clipping Path On Screen Preview Full Resolution Preview Normal Resolution Preview Low Resolution Preview Custom: Custom: Text Color: Shading: Text Stroke: Dot Hyphen Underscore Custom Atur Sendiri None tab fill Kosong Text Teks Shapes Lines Images Regular Polygons Zoom Misc. Settings Object Duplicate X-Displacement Y-Displacement Rotation Tool Constrain to: Other Properties Horizontal displacement of objects Vertical displacement of objects Constrain value for the rotation tool when the CTRL-Key is pressed TabTypograpy Subscript % &Displacement: &Scaling: Superscript D&isplacement: S&caling: Small Caps Sc&aling: Displacement above the baseline of the font on a line Relative size of the superscript compared to the normal font Displacement below the baseline of the normal font on a line Relative size of the subscript compared to the normal font Relative size of the small caps font compared to the normal font Underline Garis Bawah Displacement: Auto Line Width: Strikethru Coret Automatic &Line Spacing Line Spacing: Percentage increase over the font size for the line spacing Displacement below the baseline of the normal font expressed as a percentage of the fonts descender Line width expressed as a percentage of the font size Displacement above the baseline of the normal font expressed as a percentage of the fonts ascender Tabruler Left Kiri Right Kanan Full Stop Comma Center Tengah &Position: Delete All Indentation for first line of the paragraph Indentation from the left for the whole paragraph Delete all Tabulators None Kosong Dot Hyphen Underscore Custom Atur Sendiri Fill Char: Custom: Custom: None tab fill Kosong Indentation from the right for the whole paragraph TextBrowser Locate your web browser External Web Browser Failed to Start Scribus was not able to start the external web browser application %1. Please check the setting in Preferences Tree Outline Outline Element Elemen Type Tipe Warning Peringatan Name "%1" isn't unique. Please choose another. Nama "%1" tidak unik. Silakan pilih nama lain. OK OK Group Image Gambar Text Teks Line Garis Polygon Poligon Page Halaman Free Objects Page UnderlineValues Auto % Displacement Linewidth UndoManager Add vertical guide Add horizontal guide Remove vertical guide Remove horizontal guide Move vertical guide Move horizontal guide Lock guides Unlock guides Move Resize Rotate X1: %1, Y1: %2, %3 X2: %4, Y2: %5, %6 W1: %1, H1: %2 W2: %3, H2: %4 Selection Group Grup Selection/Group Create X: %1, Y: %2 W: %3, H: %4 Align/Distribute Items involved Cancel Batal Set fill color Color1: %1, Color2: %2 Set fill color shade Set line color Set line color shade Flip horizontally Flip vertically Lock Kunci Unlock Buka Kunci Lock size Unlock size Ungroup Delete Hapus Rename From %1 to %2 Paste Tempel Cut Cut Set fill color transparency Set line color transparency Set line style Set the style of line end Set the style of line join Set line width No style Set custom line style Do not use custom line style Set start arrow Set end arrow Create table Rows: %1, Cols: %2 Set font Set font size Set font width Set font fill color Set font stroke color Set font fill color shade Set font stroke color shade Set kerning Set line spacing Set paragraph style Set language Align text Set font effect Image frame Text frame Polygon Poligon Bezier curve Polyline Convert to Import SVG image Import EPS image Scratch space Text flows around the frame Text flows around bounding box Text flows around contour line No text flow No bounding box No contour line Page %1 Set image scaling Frame size Free scaling Keep aspect ratio Break aspect ratio Edit contour line Edit shape Reset contour line Apply Master Page Set font height Import OpenOffice.org Draw image Add page Add pages Delete page Delete pages Add layer Delete layer Rename layer Raise layer Lower layer Send to layer Enable printing of layer Disable printing of layer Change name of the layer Get image Text on a Path Enable Item Printing Disable Item Printing Multiple duplicate Change Image Offset Change Image Scale X1: %1, Y1: %2 X2: %4, Y2: %5 X: %1, Y: %2 X: %4, Y: %5 Apply text style &Undo: %1 f.e. Undo: Move &Undo &Redo: %1 f.e. Redo: Move &Redo No object frame Reset control point Reset control points Apply image effects UndoPalette Action History Show selected object only &Undo &Redo Initial State UndoWidget %1: %2 undo target: action (f.e. Text frame: Resize) UpgradeChecker Attempting to get the Scribus version update file (No data on your computer will be sent to an external location) Timed out when attempting to get update file. Error when attempting to get update file: %1 File not found on server Could not open version file: %1 Error:%2 at line: %3, row: %4 An error occurred while looking for updates for Scribus, please check your internet connection. No updates are available for your version of Scribus %1 One or more updates for your version of Scribus (%1) are available: Please visit www.scribus.net for details. UsePrinterMarginsDialog Minimum Margins for Page Size %1 UsePrinterMarginsDialogBase Use Printer Margins Select &Printer: Margins Right: &Top: &Bottom: &Left: &OK Alt+O &Cancel Alt+C ValueDialog Insert value Enter a value then press OK. Enter a value then press OK Alt+O Send your value to the script WerkToolB Tools Alat bantu Select Items Pilih Item Insert Picture Masukkan Gambar Properties... Properti... Insert Polygons Masukkan Poligon Insert Lines Masukkan Garis Insert Bezier Curves Masukkan Kurva Bezier Rotate Item Putar Item Edit Contents of Frame Edit Isi Frame WerkToolBP Button Tombol Text Field Field Teks Check Box Kotak Cek Combo Box Kotak Combo List Box Kotak Daftar Text Teks Link Link ZAuswahl &Close &Tutup gtFileDialog Choose the importer to use Automatic Import text without any formatting Importer: Encoding: Import Text Only gtImporterDialog Choose the importer to use Remember association OK OK Remember the file extension - importer association and do not ask again to select an importer for files of this type. nftdialog New From Template &Remove &Open All Semua Name Page Size Ukuran Halaman Colors Warna Description Usage Created with Date Tanggal Author Downloading Templates Document templates can be found at http://www.scribus.net/ in the Downloads section. Installing Templates Extract the package to the template directory ~/.scribus/templates for the current user or PREFIX/share/scribus/templates for all users in the system. Preparing a template Make sure images and fonts you use can be used freely. If fonts cannot be shared do not collect them when saving as a template. The template creator should also make sure that the Installing Templates section above applies to their templates as well. This means a user should be able to download a template package and be able to extract them to the template directory and start using them. Removing a template Removing a template from the New From Template dialog will only remove the entry from the template.xml, it will not delete the document files. A popup menu with remove is only shown if you have write access to the template.xml file. Translating template.xml Copy an existing template.xml to a file called template.lang_COUNTRY.xml (use the same lang code that is present in the qm file for your language), for example template.fi.xml for Finnish language template.xml. The copy must be located in the same directory as the original template.xml so Scribus can load it. patternDialogBase Patterns Load Load Set Remove OK OK Cancel Batal satdialog Save as Template Name Category Page Size Ukuran Halaman Colors Warna Description Usage Author Email More Details OK OK Less Details Legal Letter Tabloid Tabloid landscape portrait custom tfDia Create filter C&lear &Delete Choose a previously saved filter Give a name to this filter for saving Give a name for saving tfFilter Disable or enable this filter row Remove this filter row Add a new filter row to and remove match do not remove match words Remove Hapus Replace Apply Terapkan Value at the left is a regular expression with paragraph style all instances of all paragraphs paragraphs starting with paragraphs with less than paragraphs with more than WebSVN - Scribus - Blame - Rev 6769 - /trunk/Scribus/resources/translations/po/scribus.id.ts

Subversion Repositories Scribus

Rev

Rev 6530 | Rev 7508 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line