getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "colour1", shade1, "colour2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("colour", ["name"]) Sets the fill colour of the object "name" to the colour "colour". "colour" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("colour", ["name"]) Sets the line colour of the object "name" to the colour "colour". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("colour", ["name"]) Sets the text colour of the text frame "name" to the colour "colour". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("colour", ["name"]) Set "colour" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. @default getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. newPage(where [,"template"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "template" specifies the name of the template page for the new page. May raise IndexError if the page number is out of range newPage(where [,"template"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "template" specifies the name of the template page for the new page. May raise IndexError if the page number is out of range setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "colour1", shade1, "colour2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumber = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumber = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame. Text must be UTF encoded (see setText() as reference) The first character has an index of 0. "name" If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame. Text must be UTF encoded (see setText() as reference) The first character has an index of 0. "name" If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("colour", ["name"]) Sets the text colour of the text frame "name" to the colour "colour". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("colour", ["name"]) Set "colour" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. fileDialog("caption", ["filter", "defaultname" ,haspreview, issave]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". The default for both of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname" ,haspreview, issave]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". The default for both of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] rendeFont("name", "filename", "sample", size) -> bool Creates an image preview of font "name" with given text "sample" and size. Image is saved into "filename". Returns true when success. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. rendeFont("name", "filename", "sample", size) -> bool Creates an image preview of font "name" with given text "sample" and size. Image is saved into "filename". Returns true when success. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns wether the Layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns wether the Layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns wether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns wether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (left, right, top, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (left, right, top, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("colour", ["name"]) Sets the fill colour of the object "name" to the colour "colour". "colour" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("colour", ["name"]) Sets the line colour of the object "name" to the colour "colour". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. Copy #%1 of Copy #%1 of AIPlug Importing: %1 Analyzing File: Group%1 Generating Items About %1. %2 %3 %1. %2 %3 Scribus Version %1 %2 %3 Scribus Version %1 %2 %3 Build-ID: Build-ID: Contributions from: Contributions from: Windows port: Windows port: German: German: French: French: Italian: Italian: Hungarian: Hungarian: Ukrainian: Ukrainian: Bulgarian: Bulgarian: Galician: Galician: Turkish: Turkish: Lithuanian: Lithuanian: Polish: Polish: Czech: Czech: Slovak: Slovak: Danish: Danish: Norwegian: Norwegian: Welsh: Welsh: Russian: Russian: Brazilian: Brazilian: Finnish: Finnish: Basque: Basque: Slovenian: Slovenian: This panel shows the version, build date and compiled in library support in Scribus The C-C-T equates to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * This panel shows the version, build date and compiled in library support in Scribus The C-C-T equates to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * &About &About A&uthors A&uthors &Translations &Translations &Online &Online &Close &Close Development Team: Development Team: Official Documentation: Official Documentation: Other Documentation: Other Documentation: English (British): English (British): Swedish: Swedish: Homepage Homepage Online Reference Online Reference Bugs and Feature Requests Bugs and Feature Requests Mailing List Mailing List Official Translations and Translators: Official Translations and Translators: Esperanto: Esperanto: Korean: Korean: Serbian: Serbian: Spanish: Spanish: Previous Translation Contributors: Previous Translation Contributors: Catalan: Catalan: About Scribus %1 About Scribus %1 %1 %2 %3 %3-%2-%1 %4 %5 Using Ghostscript version %1 No Ghostscript version available Build ID: Wiki Mac OS&#174; X Aqua Port: Windows&#174; Port: Tango Project Icons: &Updates Check for updates to Scribus. No data from your machine will be transferred off it. OS/2&#174;/eComStation&#8482; Port: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Check for Updates Abort Update Check Developer Blog &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Yes Yes No No Filename: Version: Enabled: Release Date: Description: Author(s): Copyright: License: Scribus: About Plug-ins AboutPluginsBase &Close &Close Alt+C Alt+C ActionManager &New &New &Open... &Open... &Close &Close &Save &Save Save &As... Save &As... Re&vert to Saved Re&vert to Saved Collect for O&utput... Collect for O&utput... Get Text... Get Text... Append &Text... Append &Text... Get Image... Save &Text... Save &Text... Save Page as &EPS... Save Page as &EPS... Save as P&DF... Save as P&DF... Document &Setup... Document &Setup... &Print... &Print... Print Previe&w Print Previe&w &Quit &Quit &Undo &Undo &Redo &Redo &Item Action Mode Cu&t Cu&t &Copy &Copy &Paste &Paste C&lear Contents C&lear Contents Select &All Select &All &Deselect All &Search/Replace... &Search/Replace... Edit Image... C&olors... C&olours... &Paragraph Styles... &Paragraph Styles... &Line Styles... &Line Styles... &Master Pages... &JavaScripts... P&references... P&references... %1 pt &Other... &Other... &Left &Left &Center &Centre &Right &Right &Block &Block &Forced &Forced &Normal &Underline &Underline Underline &Words &Strike Through &All Caps Small &Caps Su&perscript Su&bscript &Outline &Outline S&hadow &Image Effects &Tabulators... &Tabulators... D&uplicate D&uplicate &Multiple Duplicate &Multiple Duplicate &Transform &Delete &Delete &Group &Group &Ungroup &Ungroup Is &Locked Si&ze is Locked Lower to &Bottom Raise to &Top &Lower &Lower &Raise &Raise Send to S&crapbook Send to S&crapbook &Attributes... More Info... I&mage Visible I&mage Visible &Update Image Adjust Frame to Image Embed Image Extended Image Properties &Low Resolution &Normal Resolution &Full Resolution Is PDF &Bookmark Is PDF &Bookmark Is PDF A&nnotation Is PDF A&nnotation Annotation P&roperties Annotation P&roperties Field P&roperties Field P&roperties &Edit Shape... &Edit Shape... &Attach Text to Path &Attach Text to Path &Detach Text from Path &Detach Text from Path &Combine Polygons &Combine Polygons Split &Polygons Split &Polygons &Bezier Curve &Bezier Curve &Image Frame &Outlines &Outlines &Polygon &Text Frame &Text Frame &Glyph... Sample Text &Insert... &Insert... Im&port... &Delete... &Delete... &Copy... &Move... &Move... &Apply Master Page... Convert to Master Page... Manage &Guides... Manage &Guides... Manage Page Properties... &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails &Thumbnails Show &Margins Show &Margins Show &Frames Show &Frames Show &Images Show &Images Show &Grid Show &Grid Show G&uides Show G&uides Show &Baseline Grid Show &Baseline Grid Show &Text Chain Show Control Characters Sn&ap to Grid Sn&ap to Grid Sna&p to Guides Sna&p to Guides &Properties &Properties &Scrapbook &Scrapbook &Layers &Layers &Arrange Pages &Bookmarks &Bookmarks &Measurements Action &History Preflight &Verifier &Align and Distribute &Tools &Tools P&DF Tools P&DF Tools Select Item &Shape &Shape Rotate Item Rotate Item Zoom in or out Zoom in or out Zoom in Zoom out Edit Contents of Frame Edit Contents of Frame Edit Text... Edit Text... Link Text Frames Link Text Frames Unlink Text Frames Unlink Text Frames &Eye Dropper Copy Item Properties Edit the text with the Story Editor Edit the text with the Story Editor Insert Text Frame Insert Text Frame Insert Table Insert Table Insert Freehand Line Insert Freehand Line &Manage Pictures &Manage Pictures &Hyphenate Text &Hyphenate Text Dehyphenate Text &Generate Table Of Contents &Cascade &Cascade &Tile &Tile &About Scribus &About Scribus About &Qt About &Qt Toolti&ps Toolti&ps Scribus &Manual... Scribus &Manual... Non Breaking Dash Non Breaking &Space Page &Number New Line Frame Break Column Break Copyright Registered Trademark Trademark Bullet Em Dash En Dash Figure Dash Quotation Dash Toggle Palettes Toggle Guides &Printing Enabled &Flip Horizontally &Flip Vertically Show Rulers &Outline Document Outline Palette &Outline Solidus Middle Dot En Space Em Space Thin Space Thick Space Mid Space Hair Space Insert Page Number Insert Page Number ff fi fl ffi ffl ft st S&tyles... &Outline type effect &Outline &Outlines Convert to oulines &Outlines Paste (&Absolute) C&lear C&lear Insert PDF Push Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Save as &EPS... Show Text Frame Columns Preview Mode Show Layer Indicators Paste Image from Clipboard Colors and Fills... Marks... Notes Styles... Adjust Group Patterns Inline Items Insert Rows... Insert Columns... Delete Rows Delete Columns Merge Cells Split Cells... Set Row Heights... Set Column Widths... Distribute Rows Evenly Distribute Columns Evenly Adjust Frame to Table Adjust Table to Frame Adjust Frame Height to Text &Symbol Unweld items Weld items Edit weld item &Frames... Sticky Tools Anchor Mark Variable Text Reference to Item Reference to Mark Foot/Endnote Edit Mark Update Marks &Fit to Height Fit to Width Show Bleeds Snap to Items Symbols Unlink Text Frame with Text Copy Unlink Text Frame with Text Cut Insert Arc Insert Spiral Insert Calligraphic Line Insert PDF Radio Button Insert 3D Annotation &Update Document Soft &Hyphen &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Straight Double Unicode 0x0022 Single Left Unicode 0x2018 Single Right Unicode 0x2019 Double Left Unicode 0x201C Double Right Unicode 0x201D Single Reversed Unicode 0x201B Double Reversed Unicode 0x201F Single Left Guillemet Unicode 0x2039 Single Right Guillemet Unicode 0x203A Double Left Guillemet Unicode 0x00AB Double Right Guillemet Unicode 0x00BB Low Single Comma Unicode 0x201A Low Double Comma Unicode 0x201E CJK Single Left Unicode 0x300C CJK Single Right Unicode 0x300D CJK Double Left Unicode 0x300E CJK Double Right Unicode 0x300F &400% &100% {400%?} Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Insert &Render Frame Check for Updates Number of Pages Adjust Image to Frame Inline Frames File File &File &File Edit &Edit &Edit Style Style &Style Item &Item &Item Insert I&nsert Page Page &Page &Page View &View &View Table &Table Extras E&xtras E&xtras Windows &Windows &Windows Help &Help &Help Plugin Menu Items Others Unicode Characters Move/Resize Value Indicator New &from Template... New &from Template... AdjustCmsDialog CMS Settings AdvOptions Advanced Options Advanced Options Creates PostScript Level 3 Creates PostScript Level 3 Creates PostScript Level 2 only, beware, this can create huge files Creates PostScript Level 2 only, beware, this can create huge files Creates PostScript Level 1 only, beware, this can create huge files Creates PostScript Level 1 only, beware, this can create huge files Mirror Page(s) &Horizontal Mirror Page(s) &Horizontal Mirror Page(s) &Vertical Mirror Page(s) &Vertical Apply &ICC Profiles Apply &ICC Profiles PostScript Level &1 PostScript Level &1 PostScript Level &2 PostScript Level &2 PostScript Level &3 PostScript Level &3 &OK &OK &Cancel &Cancel Apply Under Color &Removal Apply Under Colour &Removal A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Align Distribute/Align Distribute/Align Align Align Horizontal Horizontal Left Sides Left Sides Middles Middles Right Sides Right Sides Vertical Vertical Top Sides Top Sides Bottom Sides Bottom Sides mm mm in in p p &OK &OK &Apply &Apply &Cancel &Cancel &Between: &Between: A&lign A&lign Di&splacement Di&splacement Distribute &Evenly Distribute &Evenly Bet&ween: Bet&ween: Do &Not Change Do &Not Change Al&ign Al&ign Dis&placement Dis&placement pt pt Distribute E&venly Distribute E&venly &Do Not Change &Do Not Change AlignDistribute DockWidget Align Align &Selected Guide: &Relative To: &Align Sides By: ... Distribute &Distance: Reverse Distribution Swap AlignDistributeBase Align Align AlignDistributePalette Align and Distribute Align Align &Relative to: First Selected Last Selected Page Page Margins Guide Selection &Align Sides By: Align bottoms Align right sides Center on vertical axis Align left sides Center on horizontal axis Align tops &Selected Guide: Distribute right sides equidistantly Distribute bottoms equidistantly Distribute centers equidistantly horizontally Distribute left sides equidistantly Distribute centers equidistantly vertically Distribute tops equidistantly &Distance: Distribute the items with the distance specified When distributing by a set distance, reverse the direction of the distribution of items None Selected Swap items to the left Swap items to the right Y: %1%2 X: %1%2 Align right sides of items to left side of anchor Move Resize <qt>When aligning one side of an item do one of the following:<ul><li>Always move the other side too (preserve existing width and height)</li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal Distribute <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left Align Text Left Align Text Right Align Text Right Align Text Center Align Text Centre Align Text Justified Align Text Justified Align Text Forced Justified Align Text Forced Justified Annot Field Properties Field Properties Type: Type: Button Button Text Field Text Field Check Box Check Box Combo Box Combo Box List Box List Box Properties Properties Name: Name: Tool-Tip: Tool-Tip: Text Text Border Border Color: Colour: None None Width: Width: Thin Thin Normal Normal Wide Wide Style: Style: Solid Solid Dashed Dashed Underline Underline Beveled Beveled Inset Inset Other Other Read Only Read Only Required Required Don't Export Value Don't Export Value Visibility: Visibility: Visible Visible Hidden Hidden No Print No Print No View No View Appearance Appearance Text for Button Down Text for Button Down Text for Roll Over Text for Roll Over Icons Icons Use Icons Use Icons Remove Remove Pressed Pressed Roll Over Roll Over Icon Placement... Icon Placement... Highlight Highlight Invert Invert Outlined Outlined Push Push Multi-Line Multi-Line Password Password Limit of Limit of Characters Characters Do Not Scroll Do Not Scroll Do Not Spell Check Do Not Spell Check Check Style: Check Style: Check Check Cross Cross Diamond Diamond Circle Circle Star Star Square Square Default is Checked Default is Checked Editable Editable Options Options Java Script Java Script Go To Go To Submit Form Submit Form Reset Form Reset Form Import Data Import Data Event: Event: Mouse Up Mouse Up Mouse Down Mouse Down Mouse Enter Mouse Enter Mouse Exit Mouse Exit On Focus On Focus On Blur On Blur Script: Script: Edit... Edit... Submit to URL: Submit to URL: Submit Data as HTML Submit Data as HTML Import Data from: Import Data from: Destination Destination To File: To File: Change... Change... Page: Page: X-Pos: X-Pos: pt pt Y-Pos: Y-Pos: Action Action Field is formatted as: Field is formatted as: Plain Plain Number Number Percentage Percentage Date Date Time Time Custom Custom Number Format Number Format Decimals: Decimals: Use Currency Symbol Use Currency Symbol Prepend Currency Symbol Prepend Currency Symbol Formatting Formatting Percent Format Percent Format Date Format Date Format Time Format Time Format Custom Scripts Custom Scripts Format: Format: Keystroke: Keystroke: Format Format Value is not validated Value is not validated Value must be greater than or equal to: Value must be greater than or equal to: and less or equal to: and less or equal to: Custom validate script: Custom validate script: Validate Validate Value is not calculated Value is not calculated Value is the Value is the sum sum product product average average minimum minimum maximum maximum of the following fields: of the following fields: Pick... Pick... Custom calculation script: Custom calculation script: Calculate Calculate OK OK Cancel Cancel Enter a comma separated list of fields here Enter a comma separated list of fields here You need at least the Icon for Normal to use Icons for Buttons You need at least the Icon for Normal to use Icons for Buttons Open Open Images (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;All Files (*) Example: Example: Selection Change Selection Change Font for use with PDF 1.3: Font for use with PDF 1.3: Flag is ignored for PDF 1.3 Flag is ignored for PDF 1.3 PDF Files (*.pdf);;All Files (*) PDF Files (*.pdf);;All Files (*) None highlight None None action None Annota Annotation Properties Annotation Properties Text Text Link Link External Link External Link External Web-Link External Web-Link Options Options Icon: Note Comment Key Help NewParagraph Paragraph Insert Cross Cross Circle Circle Annotation is Open Destination Destination pt pt Open Open PDF-Documents (*.pdf);;All Files (*) PDF-Documents (*.pdf);;All Files (*) &Type: &Type: C&hange... C&hange... &Page: &Page: &X-Pos &X-Pos &Y-Pos: &Y-Pos: &OK &OK &Cancel &Cancel %1;;All Files (*) Export absolute Filename ApplyMasterPageDialog Normal Normal Apply Master Page &Master Page: Alt+P Alt+E Alt+D &All pages &All pages Alt+A Alt+W to to Alt+O Alt+O Alt+C Alt+C Apply the selected master page to even, odd or all pages within the following range Possible Hyphenation Possible Hyphenation Apply to Current &Page &Even Pages O&dd Pages &All Pages &All Pages &Within Range ApplyT Apply Template Apply Template Normal Normal &Template: &Template: Apply to &Current Page Apply to &Current Page Apply from &Page: Apply from &Page: To: To: &OK &OK &Cancel &Cancel Apply to all &even Pages Apply to all &even Pages Apply to all &odd Pages Apply to all &odd Pages ArcVectorBase Edit Arc Start Angle: End Angle: Height: Height: Width: Width: End Edit ArcWidgetBase Form Start Angle: End Angle: Sample Polygon Sample Polygon ArrowChooser None None AspellPlugin Spell-checking support 0.1 100% {0.1?} Spell Checker Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error AspellPluginBase Spell Check Replacement: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. &Add Word &Change Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: Ignore the current text not found in the active dictionary &Ignore Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close Close AspellPluginImpl Loaded default Spell Checker Plugin Failed to Initialise. Configuration invalid Spell Checker Plugin Failed to Initialise. No Aspell dictionaries could be found. AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Aspell dictionary. Spell Checker No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Flow Chart Jigsaw Specials Default Shapes Barcode &Barcode... Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator Error opening file: %1 12 or 13 digits 8 digits 11 or 12 digits 7 or 8 digits 5 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits Variable number of digits and capital letters Variable number of hexadecimal characters Variable number of characters, digits and any symbols. Barcode Barcode incomplete 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type BarcodeGeneratorBase &Type: &Type: Select one of the available barcode type here The numeric representation of the code itself. See the help message below Reset the barcode samples Alt+I If checked, there will be numbers in the barcode too Alt+G Draw arrows to be sure of space next the code Colors Colours &Background Alt+B Background color - under the code lines &Lines Alt+L Color of the lines in barcode &Text &Text Alt+T Color of the text and numbers Hints and help is shown here Co&de: Alt+N Generate and include a checksum in barcode Alt+U Include the checksum digit in the barcode text Insert Barcode Format Format Incl&ude Checksum Digit I&nclude Checksum &Guard Whitespace &Include Text in Barcode Biblio Scrapbook Scrapbook Scrapbooks (*.scs);;All Files (*) Scrapbooks (*.scs);;All Files (*) Delete Delete Object Object New Entry New Entry Rename Rename Warning Warning Name "%1" isn't unique. Please choose another. Name "%1" isn't unique. Please choose another. OK OK &New &New &Load... &Load... &Save &Save Save &As... Save &As... &Close &Close &Small &Small &Medium &Medium &Large &Large &File &File &Preview &Preview &Name: &Name: Choose a Scrapbook Directory Choose a Directory Choose a Directory Choose a scrapbook file to import Create a new scrapbook page Close the selected scrapbook Copy To: Move To: Main Hide Directories Open Directories in a new tab Copied Items New Name Scrapbook (*.scs *.SCS) Hide Images Hide Images Hide Vector files Paste to Page Save as... Save as... Close Close Delete Contents Do you really want to delete all entries? Go up one Directory Import a scrapbook file from Scribus <=1.3.2 Configure the scrapbook BookMView Bookmarks Bookmarks Move Bookmark Move Bookmark Insert Bookmark Insert Bookmark Cancel Cancel BookPalette Bookmarks Bookmarks ButtonIcon Icon Placement Icon Placement Layout: Layout: Caption only Caption only Icon only Icon only Caption below Icon Caption below Icon Caption above Icon Caption above Icon Caption right to Icon Caption right to Icon Caption left to Icon Caption left to Icon Caption overlays Icon Caption overlays Icon Scale: Scale: Always Always When Icon is too big When Icon is too big Never Never Scale How: Scale How: Proportional Proportional Non Proportional Non Proportional Icon Icon OK OK Cancel Cancel Reset Reset When Icon is too small When Icon is too small CMSPrefs Color Management Settings Colour Management Settings System Profiles System Profiles Rendering Intents Rendering Intents Monitor profiles can only be changed when no documents are currently opened. Perceptual Perceptual Relative Colorimetric Relative Colourimetric Saturation Saturation Absolute Colorimetric Absolute Colourimetric Default color profile for imported images Default colour profile for imported images Default color profile for solid colors on the page Default colour profile for solid colours on the page Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your monitor. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. &Activate Color Management &Activate Colour Management &Pictures: &Pictures: &Solid Colors: &Solid Colours: &Monitor: &Monitor: P&rinter: P&rinter: M&onitor: M&onitor: Pr&inter: Pr&inter: Sim&ulate Printer on the Screen Sim&ulate Printer on the Screen Mark Colors out of &Gamut Mark Colours out of &Gamut Use &Blackpoint Compensation Use &Blackpoint Compensation &OK &OK &Cancel &Cancel Images: Images: CMSPrefsBase Form &Activate Color Management &Activate Colour Management System Profiles System Profiles &RGB Images: Default color profile for imported RGB images &CMYK Images: Default color profile for imported CMYK images &RGB Solid Colors: Default color profile for solid RGB colors on the page &CMYK Solid Colors: Default color profile for solid CMYK colors on the page Document Options Simulate printer on Screen Monitor Profile &Monitor: &Monitor: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). P&rinter: P&rinter: Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Rendering Intents Rendering Intents Images: Images: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Sim&ulate Printer on the Screen Sim&ulate Printer on the Screen Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Mark Colors out of &Gamut Mark Colours out of &Gamut Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Document Rendering Intents Use &Blackpoint Compensation Use &Blackpoint Compensation CMYKChoose Edit Color Edit Colour CMYK CMYK RGB RGB Web Safe RGB Web Safe RGB New New Old Old OK OK C: C: M: M: Y: Y: K: K: Dynamic Color Bars Dynamic Colour Bars Static Color Bars Static Colour Bars Scribus Swatches User Swatches R: R: G: G: B: B: % % Warning Warning Name of the Color is not unique Name of the colour is not unique HSV-Colormap HSV-Colourmap &Name: &Name: Color &Model Colour &Model &OK &OK &Cancel &Cancel None None You cannot create a color named "%1". It's a reserved name for transparent color You cannot create a colour named "%1". It's a reserved name for transparent colour Is Spot Color You cannot create a color named "%1". It is a reserved name for transparent color The name of the color already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CStyleP Colors Colours CWDialog Merging colors Error: Color %1 exists already! Color %1 appended. Now opening the color manager. Color Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Color Wheel Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors CMYK CMYK RGB RGB HSV Colors of your chosen color scheme. Color Scheme Method Angle: Angle: Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Merge created colors into the document colors &Merge Alt+M Replace created colors in the document colors &Replace &Replace Alt+R Leave colors untouched &Cancel &Cancel Alt+C Alt+C Preview: Sample color scheme. Simulate common vision defects here. Select type of the defect. Vision Defect Type: C: C: % % M: M: Y: Y: K: K: RGB: HSV: R: R: G: G: B: B: CMYK: H: S: V: Document Document CWDialogBase Y: Y: Document Document &Cancel &Cancel Alt+C Alt+C % % Canvas X: %1 Y: %2 X: %1 Y: %1 Length: %1 Angle: %2 Width: %1 Height: %2 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. Color Not Found The name you have selected already exists. Please enter a different name for this new color. CanvasMode_FrameLinks Linking Text Frames Before After CanvasMode_Normal Go to Page %1 Go to URL %1 Go to Page %1 in File %2 Overflow Characters: %1 Page %1 does not exist! Link Target is Web URL. URL: %1 Information Information Link Target is external File. File: %1 Page: %2 All Supported Formats All Supported Formats Open Open CellStyleComboBox No Style No Style CgmPlug Importing: %1 Analyzing File: Generating Items CharSelect Select Character: Select Character: Font: Font: &Insert &Insert C&lear C&lear &Close &Close Insert the characters at the cursor in the text Insert the characters at the cursor in the text Delete the current selection(s). Delete the current selection(s). Close this dialog and return to text editing. Close this dialog and return to text editing. Greek Greek Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Error Error Error reading file %1 - file is corrupted propably. Cannot write file %1 Character Palette Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette CharSelectEnhanced Full Character Set Basic Latin Latin-1 Supplement Latin Extended-A Latin Extended-B General Punctuation Super- and Subscripts Currency Symbols Letterlike Symbols Number Forms Arrows Mathematical Operators Box Drawing Block Elements Geometric Shapes Miscellaneous Symbols Dingbats Small Form Variants Ligatures Specials Greek Greek Greek Extended Cyrillic Cyrillic Supplement Arabic Arabic Extended A Arabic Extended B Hebrew Enhanced Character Palette &Font: &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text Insert the characters at the cursor in the text &Insert &Insert Delete the current selection(s). Delete the current selection(s). C&lear C&lear Type in a four digit Unicode value directly here CharStyleComboBox No Style No Style CharTable Delete Delete CharTableView Delete Delete CheckDocument Glyphs missing Text overflow Object is not on a Page Missing Image Object has transparency Object is a PDF Annotation or Field Object is a placed PDF Document Document No Problems found After Marks update document was changed Print/Visible Mismatch Page Page Free Objects Preflight Verifier Items Problems Current Profile: Image dimension is smaller than its frame &Ignore Errors Check again Image is GIF OK OK Transparency used Blendmode used Layer "%1" Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame Layers Layers Issue(s): %1 Master Pages Layer Layer Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI ClockWidget A CollectForOutput Choose a Directory Choose a Directory Cannot create directory: %1 Collecting... Cannot collect the file: %1 Warning Warning Cannot collect all files for output for file: %1 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... Cannot collect all files for output for file: %1 Cannot collect the file: %1 ColorListBox Sort by Name Sort by Color Sort by Type ColorManager Colors Colours &Import &Import &New &New &Edit &Edit D&uplicate D&uplicate &Delete &Delete &Remove Unused &Remove Unused Color Sets Colour Sets Current Color Set: Current Colour Set: &Save Color Set &Save Colour Set Choose a color set to load Choose a colour set to load Save the current color set Save the current colour set Remove unused colors from current document's color set Remove unused colours from current document's colour set Create a new color within the current set Create a new colour within the current set Edit the currently selected color Edit the currently selected colour Make a copy of the currently selected color Make a copy of the currently selected colour Delete the currently selected color Delete the currently selected colour Make the current colorset the default color set Make the current colourset the default colour set &Name: &Name: Choose a Name Choose a Name Open Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) Documents (*.sla *.scd);;All Files (*) Copy of %1 Copy of %1 New Color New Colour Information Information Import Import ColorWheel Monochromatic Analogous Complementary Split Complementary Triadic Tetradic (Double Complementary) Base Color ColorWheelDialog C&olor C&olour Color Colour New Color New Colour ColorWheelPlugin &Color Wheel... Color setting helper Color selector with color theory included. ColumnResize Width Width CommonStrings &Apply &Apply &Cancel &Cancel None None &OK &OK &Save &Save Warning Warning None color name None Custom CommonStrings, custom page size Custom Single Page Double Sided 3-Fold 4-Fold Left Page Left Page Right Page Right Page Monday Tuesday Wednesday Thursday Friday Saturday Sunday January February March April May June July August September October November December Yes Yes No No &Yes &Yes &No &No Normal Normal Left Page Left page location Left Page Middle Middle page location Middle Left Middle Left page location Middle Right Middle Right page location Right Page Right page location Right Page Normal Default single master page Normal Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Protanopia (Red) Color Blindness - Red Color Blind Deuteranopia (Green) Color Blindness - Greed Color Blind Tritanopia (Blue) Color Blindness - Blue Color Blind Full Color Blindness Color Blindness - Full Color Blindness Custom: Custom Tab Fill Option Solid Line Solid Line Dashed Line Dashed Line Dotted Line Dotted Line Dash Dot Line Dash Dot Line Dash Dot Dot Line Dash Dot Dot Line None Optical Margin Setting None Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Duotone Colorspace Unknown Colorspace (Unknown) Unknown PostScript Text Frame Text Frame Image Frame Line Line Polygon Polygon Polyline Polyline Text on a Path Text on a Path PDF 3D Annotation Symbol Group Group Regular Polygon Arc Spiral Table Multiple Multiple frame types PDF Push Button PDF Radio Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation Button Button RadioButton Textfield Checkbox Combobox Listbox TextAnnot Link Link Default Table Style Default Cell Style Monochrome Colorspace PostScript Level 1 PostScript Level 2 PostScript Level 3 Windows GDI Alt Alt Shift Shift Cmd Ctrl Ctrl Windows Meta Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings Paste File... Delete Page CopyPageToMasterPageBase Convert Page to Master Page Name: Name: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Cpalette Normal Normal Horizontal Gradient Horizontal Gradient Vertical Gradient Vertical Gradient Diagonal Gradient Diagonal Gradient Cross Diagonal Gradient Cross Diagonal Gradient Radial Gradient Radial Gradient Opacity: Opacity: % % None None Shade: Shade: Edit Line Color Properties Edit Line Colour Properties Edit Fill Color Properties Edit Fill Colour Properties Saturation of color Saturation of colour Normal or gradient fill method Normal or gradient fill method Set the transparency for the color selected Set the transparency for the colour selected Color of selected object Colour of selected object Free linear Gradient Free linear Gradient Free radial Gradient Free radial Gradient X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: mm mm in in p p Saturation Saturation Color Colour X: X: Y: Y: Solid Solid Gradient Pattern Custom Custom Create Mesh CreateMode 3DAnnot CreateRange Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Range of Pages De&lete De&lete Alt+L Move &Down Alt+D Move &Up Alt+U Add a Range of Pages Consecutive Pages Even Pages From: To: To: &Add To Range Alt+A Odd Pages Comma Separated List Advanced Reordering Page Order Sample Page Order: Page Group Size: &OK &OK Alt+O Alt+O &Cancel &Cancel Alt+C Alt+C CreateRangeBase To: To: De&lete De&lete &OK &OK Alt+O Alt+O &Cancel &Cancel Alt+C Alt+C CsvDialog CSV Importer Options CSV Importer Options Field delimiter: Field delimiter: (TAB) (TAB) Value delimiter: Value delimiter: First row is a header First row is a header OK OK Cancel Cancel None None None delimiter None CupsOptions Printer Options Printer Options Option Option Value Value Page Set Page Set All Pages All Pages Even Pages only Even Pages only Odd Pages only Odd Pages only Mirror Mirror No No Yes Yes Orientation Orientation Portrait Portrait Landscape Landscape N-Up Printing N-Up Printing Page per Sheet Page per Sheet Pages per Sheet Pages per Sheet This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * &OK &OK &Cancel &Cancel This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Open Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Save as Cannot write the file: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog Encoding: Encoding: Moves to your Document Directory. This can be set in the Preferences. Moves to your Document Directory. This can be set in the Preferences. &Compress File &Compress File &Include Fonts &Include Fonts Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CvgPlug Importing: %1 Analyzing File: Generating Items CwSetColor Y: Y: DashEditor Value: Offset: DeferredTask Cancelled by user DelColor Delete Color Delete Colour ? ? Replace it with: Replace it with: Delete color: Delete colour: None None &OK &OK &Cancel &Cancel Delete Color: Replace With: DelPages Delete Pages Delete Pages Delete from: Delete from: to: to: &OK &OK &Cancel &Cancel Delete From: DelStyle No Style No Style DialogsAPI Alert - Scribus DmF Missing Font Missing Font The Font %1 is not installed. The Font %1 is not installed. Use Use instead instead OK OK DocIm Importing failed Importing Word document failed %1 DocInfos Document Information Document Information &Title: &Title: &Author: &Author: &Subject: &Keywords: &Keywords: Descri&ption: Descri&ption: P&ublisher: P&ublisher: &Contributors: &Contributors: Dat&e: Dat&e: T&ype: T&ype: F&ormat: F&ormat: Identi&fier: Identi&fier: &Source: &Source: &Language: &Language: &Relation: &Relation: Co&verage: Co&verage: Ri&ghts: Ri&ghts: &Document &Document Further &Information Further &Information The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files A person or organisation responsible for making the document available A person or organisation responsible for making the document available A person or organisation responsible for making contributions to the content of the document A person or organisation responsible for making contributions to the content of the document A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc The nature or genre of the content of the document, eg. categories, functions, genres, etc The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here An unambiguous reference to the document within a given context such as ISBN or URI An unambiguous reference to the document within a given context such as ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH A reference to a related document, possibly using a formal identifier such as a ISBN or URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Information about rights held in and over the document, eg. copyright, patent or trademark Information about rights held in and over the document, eg. copyright, patent or trademark &OK &OK &Cancel &Cancel Documen&t The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH DocSections &Add &Add &Delete &Delete Name Name Style Style DocSectionsBase Style Style &Add &Add &Delete &Delete DocumentItemAttributes None None None relationship None None auto add None None types None &Add &Add &Copy &Copy Alt+C Alt+C &Delete &Delete C&lear C&lear Name Name Type Type Value Value DocumentItemAttributesBase Type Type &Add &Add &Copy &Copy Alt+C Alt+C &Delete &Delete C&lear C&lear DrwPlug Group%1 Importing: %1 Analyzing File: Generating Items EPSPlug Importing File: %1 failed! Importing File: %1 failed! Fatal Error Fatal Error Error Error Analyzing PostScript: Generating Items Converting of %1 images failed! Group%1 Importing: %1 EditStyle Edit Style Edit Style Character Character pt pt Effect: Effect: None None Vertical Spaces Vertical Spaces Line Spacing Line Spacing OK OK Warning Warning Name of the Style is not unique Name of the Style is not unique Name of your paragraph style Name of your paragraph style Font of selected text or object Font of selected text or object Font Size Font Size Color of text fill Colour of text fill Color of text stroke Colour of text stroke Provides an oversized first letter for a paragraph. Used for stylistic effect Provides an oversized first letter for a paragraph. Used for stylistic effect Determines the overall height, in line numbers, of the Drop Caps Determines the overall height, in line numbers, of the Drop Caps Align text to baseline grid Align text to baseline grid Spacing above the paragraph Spacing above the paragraph Spacing below the paragraph Spacing below the paragraph mm mm in in p p Tabulators and Indentation Tabulators and Indentation &Name: &Name: &Font: &Font: Si&ze: Si&ze: &Alignment: &Alignment: &Drop Caps &Drop Caps &Lines: &Lines: F&ill Color: F&ill Colour: St&roke Color: St&roke Colour: Adjust to Baseline &Grid Adjust to Baseline &Grid Line &Spacing: Line &Spacing: Abo&ve: Abo&ve: &Below: &Below: &OK &OK &Cancel &Cancel % % Background Background EditToolBar Edit Editor Editor Editor Javascripts (*.js);;All Files (*) Javascripts (*.js);;All Files (*) &New &New &Open... &Open... Save &As... Save &As... &Save and Exit &Save and Exit &Exit without Saving &Exit without Saving &Undo &Undo &Redo &Redo Cu&t Cu&t &Copy &Copy &Paste &Paste C&lear C&lear &Get Field Names &Get Field Names &File &File &Edit &Edit OK OK Cancel Cancel JavaScripts (*.js);;All Files (*) Ctrl+N Ctrl+Z Ctrl+X Ctrl+C Ctrl-V EffectsDialog Image Effects Options: Color: Colour: Shade: Shade: Brightness: Contrast: Radius: Value: Posterize: Available Effects Blur Brightness Colorize Contrast Grayscale Invert Invert Posterize Sharpen >> << Effects in use OK OK Cancel Cancel Color 1: Color 2: Color 3: Color 4: Duotone Tritone Quadtone Curves ExceptHookDialog Script error Script error An exception occured while running the script. &Close &Close Exception &Details >> ExportBitmap File exists. Overwrite? File exists. Overwrite? exists already. Overwrite? exists already. Overwrite? All All Save as Image Save as Image Insufficient memory for this image size. Error writing the output file(s). Error writing the output file(s). ExportForm &All pages &All pages &OK &OK &Cancel &Cancel Change the output directory Change the output directory The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Export only the current page Export only the current page Available export formats Available export formats Choose a Export Directory Choose a Export Directory C&hange... C&hange... &Export to Directory: &Export to Directory: Image &Type: Image &Type: &Quality: &Quality: Export as Image(s) Export as Image(s) Options Options &Resolution: &Resolution: % % dpi dpi Range Range &Current page &Current page &Range &Range C C Export a range of pages Export a range of pages Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Export all pages Export all pages Resolution of the Images Use 72 dpi for Images intended for the Screen Resolution of the Images Use 72 dpi for Images intended for the Screen The quality of your images - 100% is the best, 1% the lowest quality The quality of your images - 100% is the best, 1% the lowest quality &Size: &Size: Size of the images. 100% for no changes, 200% for two times larger etc. Size of the images. 100% for no changes, 200% for two times larger etc. Image size in Pixels TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Automatic ExtImageProps Extended Image Properties Normal Normal Darken Lighten Hue Saturation Saturation Color Colour Luminosity Multiply Screen Dissolve Dissolve Overlay Hard Light Soft Light Difference Exclusion Color Dodge Color Burn Blend Mode: Opacity: Opacity: % % Name Name Background Background Layers Layers Don't use any Path Paths Paths Live Preview FDialogPreview Size: Size: Title: Title: No Title No Title Author: Author: Unknown Unknown Scribus Document Scribus Document Resolution: DPI Colorspace: File Format: Farbmanager Colors Colours Color Sets Colour Sets Current Color Set: Current Colour Set: Choose a Name Choose a Name Open Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) Documents (*.sla *.scd);;All Files (*) New Color New Colour Copy of %1 Copy of %1 Choose a color set to load Choose a colour set to load Save the current color set Save the current colour set Remove unused colors from current document's color set Remove unused colours from current document's colour set Append colors to the current set from an existing document Append colours to the current set from an existing document Create a new color within the current set Create a new colour within the current set Edit the currently selected color Edit the currently selected colour Make a copy of the currently selected color Make a copy of the currently selected colour Delete the currently selected color Delete the currently selected colour Make the current colorset the default color set Make the current colourset the default colour set &Append &Append &New &New &Edit &Edit D&uplicate D&uplicate &Delete &Delete &Remove Unused &Remove Unused &Save Color Set &Save Colour Set &OK &OK &Cancel &Cancel &Name: &Name: None None &Import &Import FileLoader Some fonts used by this document have been substituted: was replaced by: FileToolBar File File FlattenPathPlugin Flatten Path Path Tools Flattens a Path Converts a Bezier Path to a Path made of line segments. FontComboH Family: Style: Style: Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Font Name Font Name Use Font Use Font Family Style Style Variant Type Type Format Format Embed in PostScript Subset Subset Access Used in Doc Path to Font File Path to Font File Unknown font type Unknown Unknown font format Unknown User font preview System font preview Click to change the value FontPrefs Global Font Settings Global Font Settings Available Fonts Available Fonts Font Substitutions Font Substitutions Additional Paths Additional Paths Postscript Postscript Yes Yes Font Name Font Name Use Font Use Font Embed in: Embed in: Subset Subset Type Type Path to Font File Path to Font File Replacement Replacement Choose a Directory Choose a Directory &Available Fonts &Available Fonts Font &Substitutions Font &Substitutions Additional &Paths Additional &Paths &Delete &Delete C&hange... C&hange... A&dd... A&dd... &Remove &Remove &OK &OK &Cancel &Cancel Use Font font preview Use Font Embed in: font preview Embed in: Subset font preview Subset Path to Font File font preview Path to Font File FontPrefsTab Available Fonts Available Fonts Font Substitutions Font Substitutions Additional Paths Additional Paths &Available Fonts &Available Fonts Font Name Font Name Replacement Replacement &Delete &Delete Font &Substitutions Font &Substitutions C&hange... C&hange... A&dd... A&dd... &Remove &Remove Additional &Paths Additional &Paths Choose a Directory Choose a Directory FontPreview &OK &OK Alt+O Alt+O &Cancel &Cancel Alt+C Alt+C Woven silk pyjamas exchanged for blue quartz Woven silk pyjamas exchanged for blue quartz Fonts Preview Fonts Preview Append selected font into Style, Font menu Append selected font into Style, Font menu Leave preview Leave preview Woven silk pyjamas exchanged for blue quartz font preview Woven silk pyjamas exchanged for blue quartz Type font preview Type Subset font preview Subset Fonts Preview font preview Fonts Preview &Append &Append Alt+O font preview Alt+O &Close font preview &Close Alt+C font preview Alt+C Append selected font into Style, Font menu font preview Append selected font into Style, Font menu Leave preview font preview Leave preview Size of the selected font Type Type Subset Subset &Quick Search: &Font Size: &Font Size: Text Text Sample text to display Se&t Alt+T Reset the text &Close &Close Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default Show Extended Font Information Set the preview text FontPreviewBase Fonts Preview Fonts Preview Type Type Subset Subset &Font Size: &Font Size: Text Text &Append &Append &Close &Close Alt+C Alt+C FontPreviewPlugin &Font Preview... Font Preview dialog Sorting, searching and browsing available fonts. FontReplaceDialog Font Substitution This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Original Font Substitution Font Make these substitutions permanent Cancels these font substitutions and stops loading the document. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. If you select OK, then save, these substitutions are made permanent in the document. FontSelect Select Alternate Font Font Font GradientEditor Position: Position: % % Here you can add, change or remove Color-Stops. Here you can add, change or remove Colour-Stops. Add, change or remove color stops here GradientEditorBase Frame Position: Position: % % Color: Colour: Opacity: Opacity: Shade: Shade: GradientPreview Add Stop Remove Stop GradientVectorBase Gradient Vector Start: / End: Skew: Focal: Scale: Scale: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape Snap to other Mesh Points Add Patch Remove Patch GuideManager Manage Guides Manage Guides Horizontal Guides Horizontal Guides Vertical Guides Vertical Guides pt pt mm mm in in p p &Y-Pos: &Y-Pos: &Add &Add D&elete D&elete &X-Pos: &X-Pos: A&dd A&dd De&lete De&lete &Lock Guides &Lock Guides &OK &OK &Cancel &Cancel &Page &Page &Close &Close Preview Preview &Single Horizontals Alt+A Alt+E Verticals Alt+D Alt+L Appl&y to All Pages Alt+Y &Column/Row &Number: U&se Gap: Alt+S Alt+P M&argins S&election Nu&mber: Use &Gap: Alt+G &Misc Delete all guides from the current page Delete Guides from Current &Page Delete all guides from the current document Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages Refer to GuideManagerBase Manage Guides Manage Guides &Add &Add D&elete D&elete A&dd A&dd De&lete De&lete &Lock Guides &Lock Guides &Page &Page HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Contents Contents Link Link Scribus Online Help Scribus Online Help &Search &Search &New &New &Delete &Delete &Print... &Print... &File &File &Find... Find &Next Find &Previous &Edit &Edit Navigation Loading Failed &Add Bookmark D&elete All &Bookmarks &Bookmarks Find Search Term: New Bookmark New Bookmark's Title: Scribus Help &Exit Find &Next... Find &Previous... &Add &Add &Quit &Quit <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowserNavigation Form &Contents Se&arch Searching is case insensitive &Search &Search 1 100% {1?} Book&marks &New &New &Delete &Delete D&elete All HunspellDialog Spelling check complete HunspellDialogBase Check Spelling Text Language: Not in dictionary Ignore Once Ignore All Suggestions Change Change All HunspellPlugin Check Spelling... HyAsk Possible Hyphenation Possible Hyphenation Accept Accept Skip Skip Cancel Cancel Add to the Exception List Add to the Ignore List HySettings Hyphenator Settings Hyphenator Settings Length of the smallest word to be hyphenated. Length of the smallest word to be hyphenated. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. &Language: &Language: &Smallest Word: &Smallest Word: &OK &OK &Cancel &Cancel &Hyphenation Suggestions &Hyphenation Suggestions Hyphenate Text Automatically &During Typing Hyphenate Text Automatically &During Typing A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Enables automatic hyphenation of your text while typing. Enables automatic hyphenation of your text while typing. Consecutive Hyphenations &Allowed: Consecutive Hyphenations &Allowed: IdmlPlug Importing: %1 Analyzing File: Generating Items ImageInfoDialog Image Info General Info Date / Time: Has Embedded Profile: Yes Yes No No Profile Name: Has Embedded Paths: Has Layers: EXIF Info Artist: Comment: User Comment: Camera Model: Camera Manufacturer: Description: Copyright: Scanner Model: Scanner Manufacturer: Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. This file contains 2 versions of the data. Choose which one should be imported Use the pdf part Use the ai part The PDF Import plugin could not be found The file could not be imported ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats All Supported Formats ImportIdmlPlugin Import Idml... Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) Imports IDML Files Imports most IDML files into the current document, converting their vector data into Scribus objects. Adobe Indesign IDMS Adobe Indesign IDMS (*.idms *.IDMS) All Supported Formats All Supported Formats ImportPSPlugin Import &EPS/PS... Import &EPS/PS... Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportPdfPlugin Import PDF... Imports PDF Files Imports most PDF files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats The Import plugin cannot handle Postscript files ImportPubPlugin Import PUB... MS Publisher MS Publisher (*.pub *.PUB) Imports PUB Files Imports most MS Publisher files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportShapePlugin Import Dia Shapes... Dia Shapes "*.shape" File Dia Shapes "*.shape" File (*.shape *.SHAPE) Imports Dia shape Files Imports most Dia shapes into the current document, converting their vector data into Scribus objects. Dia shapes "*.shape" File (*.shape *.SHAPE) All Supported Formats All Supported Formats ImportSmlPlugin Import Sml... Kivio Stencils "*.sml" File Kivio Stencils "*.sml" File (*.sml *.SML) Imports Sml Files Imports most Kivio stencils into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats All Supported Formats Imposition Portrait Portrait Landscape Landscape ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Front side Back side &Booklet Pages per sheet 4 100% {4?} 8 100% {8?} 16 100% {16?} Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Back page from Destination page Size Size Orientation Orientation Width Width Height Height Preview Preview Refresh preview &OK &OK Alt+G &Cancel &Cancel Alt+C Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InlinePalette Paste to Item Edit Item Remove Item Inline Frames InsPage Insert Page Insert Page Inserting Inserting before Page before Page after Page after Page at End at End Normal Normal Template (Right Page): Template (Right Page): &Inserting &Inserting Page(s) Page(s) &Template (Left Page): &Template (Left Page): &Template: &Template: &OK &OK &Cancel &Cancel &Insert &Insert Master Pages &Master Page: Page Size Page Size &Size: &Size: Custom Custom Orie&ntation: Orie&ntation: Portrait Portrait Landscape Landscape &Width: &Width: &Height: &Height: Move Objects with their Page InsertAFrame Open Open T&ype &Text Frame &Text Frame &Image Frame Polygon Polygon &Location Page Placement Current Page All Pages All Pages ... Position of Frame Top Left of Margins Top Left of Page Top Left of Bleed X: X: Y: Y: Insert Frames &Size &Size Same as the Page Margins Same as the Page Same as the Bleed Same as the Imported Image Height: Height: Width: Width: &Options Source Image: There are no options for this type of frame Columns: Gap: Source Document: &OK &OK &Cancel &Cancel Range of Pages Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertAFrameBase &Text Frame &Text Frame Polygon Polygon X: X: Y: Y: &Size &Size Height: Height: Width: Width: &OK &OK &Cancel &Cancel InsertTable Insert Table Insert Table Number of Rows: Number of Rows: Number of Columns: Number of Columns: OK OK Cancel Cancel Number of rows: Number of columns: InsertTableColumnsDialog Insert Column(s) Number of Columns: Number of Columns: Position: Position: Before positions After Beginning End InsertTableRowsDialog Insert Row(s) Number of Rows: Number of Rows: Position: Position: Before positions After Beginning End JavaDocs New Script New Script Edit JavaScripts Edit JavaScripts Warning Warning &Edit... &Edit... &Add... &Add... &Delete &Delete &Close &Close &New Script: &New Script: &No &No &Yes &Yes Do you really want to delete this Script? Do you really want to delete this Script? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. Do you really want to delete this script? KeyManager Manage Keyboard Shortcuts Manage Keyboard Shortcuts Action Action Current Key Current Key Select a Key for this Action Select a Key for this Action ALT+SHIFT+T ALT+SHIFT+T Alt Alt Ctrl Ctrl Shift Shift Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ Warning Warning &No Key &No Key &User Defined Key &User Defined Key Set &Key Set &Key &OK &OK &Cancel &Cancel This Key Sequence is already in use This Key Sequence is already in use LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options Options Resolution: Automatic Automatic DPI Program: Use Preamble Status: Error Error Finished Running No item selected! Editor Editor Information Information An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Insert Symbol LayerPalette Layers Layers Add a new Layer Add a new Layer Delete Layer Delete Layer Raise Layer Raise Layer Lower Layer Lower Layer New Layer New Layer Do you want to delete all Objects on this Layer too? Do you want to delete all Objects on this Layer too? Do you want to delete all objects on this layer too? Name Name Opacity: Opacity: % % Blend Mode: Normal Normal Darken Lighten Multiply Screen Overlay Hard Light Soft Light Difference Color Dodge Color Burn Exclusion Hue Saturation Saturation Color Colour Luminosity Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer Duplicate the Current Layer Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Select Objects on Layer - Check to enable selecting. Name of the Layer - Double click on the name of a layer to edit the name LegacyMode All Files (*) All Files (*) Open Open All Supported Formats All Supported Formats LensDialogBase Optical Lens + - Lens Parameters Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools Lens Effects Apply fancy lens effects LineFormate Edit Line Styles Edit Line Styles Copy of %1 Copy of %1 New Style New Style Warning Warning Open Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) Documents (*.sla *.scd);;All Files (*) &Append &Append &New &New &Edit &Edit D&uplicate D&uplicate &Delete &Delete &Save &Save &OK &OK &Cancel &Cancel &No &No &Yes &Yes Do you really want to delete this Style? Do you really want to delete this Style? &Import &Import LineStyleW Line Width: Line Width: LineStyleWidget pt pt Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join LoadSavePlugin All Files (*) All Files (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found LoremManager Select Lorem Ipsum Author: Author: Get More: XML File: Lorem Ipsum Paragraphs: Alt+O Alt+O Alt+C Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MSpinBox pt pt pt pt mm mm in in p p mm mm in in p p MarginDialog Manage Page Properties Page Size Page Size &Size: &Size: Custom Custom Orie&ntation: Orie&ntation: Portrait Portrait Landscape Landscape &Width: &Width: &Height: &Height: Move Objects with their Page Type: Type: Margin Guides Margin Guides Other Settings Master Page: Normal Normal Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget Preset Layouts: &Bottom: &Bottom: &Top: &Top: &Right: &Right: &Left: &Left: Apply the margin changes to all existing pages in the document Distance between the top margin guide and the edge of the page Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page &Inside: &Inside: O&utside: O&utside: Printer Margins... Import the margins for the selected page size from the available printers. Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing master pages in the document Margin Guides Margin Guides Top: Bottom: Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page Bleeds Inside: Outside: Left: Right: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Mark2Item Mark to Item Mark2ItemDlg Dialog Label: Item: Mark2Mark Anchors Mark to Mark Mark to Item Note mark Mark2MarkDlg Dialog Label: Select marker: MarkAnchor Anchor Mark MarkAnchorDlg Dialog Label: MarkNote Insert Foot/Endnote MarkNoteDlg Dialog Notes Style: MarkVariableText New Mark Edit selected Mark`s label. To create new Mark select "New Mark" in drop list and input new label Edit variable text Mark with Variable Text Edit selected Mark`s label. MarkVariableTextDlg Add new Mark for Variable Text Label: Text to insert: MarksManager Dialog Update All Marks Edit Delete Delete Anchors Variable Text Marks to Items Marks to Anchors Notes marks Marks Manager Double click to find mark in text Update all refeence texts for all marks Edit selected mark MasterPagesPalette Edit Master Pages Duplicate the selected master page Delete the selected master page Add a new master page Import master pages from another document &Yes &Yes &No &No &Name: &Name: New Master Page Copy of %1 Copy of %1 Name: Name: New MasterPage New Master Page %1 Copy #%1 of Copy #%1 of Normal Normal Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Copy #%1 of %2 This master page is used at least once in the document. Do you really want to delete master page "%1"? Mdup Multiple Duplicate Multiple Duplicate pt pt mm mm in in p p &Number of Copies: &Number of Copies: &Horizontal Shift: &Horizontal Shift: &Vertical Shift: &Vertical Shift: &OK &OK &Cancel &Cancel Measurements Distances Distances X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: Angle: Length: Length: pt pt mm mm in in p p pt pt ° MeasurementsBase Distances Distances X1: X1: 10000.0000 100% {10000.0000?} Y1: Y1: X2: X2: Y2: Y2: Length: Length: DX: DX: DY: DY: Angle: Angle: Unit: MenuTest Script error Script error If you are running an official script report it at <a href="http://bugs.scribus.net">bugs.scribus.net</a> please. If you are running an official script report it at <a href="http://bugs.scribus.net">bugs.scribus.net</a> please. Show &Console Show &Console Hide &Console Hide &Console This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker. This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker. MergeDoc Change... Change... Import Import Cancel Cancel Open Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Documents (*.sla *.scd);;All Files (*) Documents (*.sla *.scd);;All Files (*) Import Template Import Template Import Page(s) Import Page(s) From Document: From Document: Import Page(s): Import Page(s): Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. from 0 from 0 Create Page(s) Create Page(s) before Page before Page after Page after Page at End at End from %1 from %1 Import Master Page &From Document: &Import Page(s): &Import Master Page Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Before Page After Page At End &Import &Import &Select... MeshDistortionDialog + - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset MeshDistortionPlugin Mesh Distortion... Path Tools Mesh Distortion of Polygons MissingFont Missing Font Missing Font The Font %1 is not installed. The Font %1 is not installed. Use Use instead instead ModeToolBar Tools Tools Angle: Angle: Width: Width: Properties... Properties... MovePages Move Pages Move Pages Copy Page Copy Page Move Page(s): Move Page(s): to: to: before Page before Page after Page after Page at End at End &OK &OK &Cancel &Cancel Move Page(s) To: To: Before Page After Page At End Number of Copies: MultiLine Edit Style Edit Style Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join Line Width: Line Width: pt pt % % OK OK pt pt Solid Line Solid Line Dashed Line Dashed Line Dotted Line Dotted Line Dash Dot Line Dash Dot Line Dash Dot Dot Line Dash Dot Dot Line Warning Warning Name "%1" isn't unique. Please choose another. Name "%1" isn't unique. Please choose another. &OK &OK &Cancel &Cancel pt pt MultiProgressDialog Progress Overall Progress: &Cancel &Cancel %v of %m MultiProgressDialogBase &Cancel &Cancel MultipleDuplicate &Horizontal Shift: &Horizontal Shift: &Vertical Shift: &Vertical Shift: &Horizontal Gap: &Vertical Gap: Multiple Duplicate Multiple Duplicate &By Number of Copies &Number of Copies: &Number of Copies: &Shift Created Items By Alt+S Create &Gap Between Items Of Alt+G Rotation: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Number of Rows: Number of Columns: Number of Columns: &OK &OK &Cancel &Cancel MultipleDuplicateBase Multiple Duplicate Multiple Duplicate Number of Rows: Number of Rows: Number of Columns: Number of Columns: &OK &OK &Cancel &Cancel MusterSeiten Edit Templates Edit Templates Warning Warning Name: Name: New Template New Template Copy of %1 Copy of %1 Copy #%1 of Copy #%1 of Normal Normal &Append &Append &New &New D&uplicate D&uplicate &Delete &Delete &Close &Close &No &No &Yes &Yes &Name: &Name: Do you really want to delete this Template? Do you really want to delete this Template? MyPlugin My &Plugin MyPluginImpl Scribus - My Plugin The plugin worked! NewDoc New Document New Document Page Size Page Size Custom Custom Portrait Portrait Landscape Landscape Margin Guides Margin Guides Options Options Points (pts) Points (pts) Millimetres (mm) Millimetres (mm) Inches (in) Inches (in) Picas (p) Picas (p) Column Guides Column Guides pt pt mm mm in in p p Document page size, either a standard size or a custom size Document page size, either a standard size or a custom size Orientation of the document's pages Orientation of the document's pages Width of the document's pages, editable if you have chosen a custom page size Width of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Height of the document's pages, editable if you have chosen a custom page size Enable single or spread based layout Enable single or spread based layout Make the first page the left page of the document Make the first page the left page of the document Distance between the top margin guide and the edge of the page Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding First page number of the document First page number of the document Default unit of measurement for document editing Default unit of measurement for document editing Create text frames automatically when new pages are added Create text frames automatically when new pages are added Distance between automatically created columns Distance between automatically created columns Number of columns to create in automatically created text frames Number of columns to create in automatically created text frames Legal Legal Letter Letter Tabloid Tabloid &Size: &Size: Orie&ntation: Orie&ntation: &Width: &Width: &Height: &Height: &Facing Pages &Facing Pages Left &Page First Left &Page First &Left: &Left: &Right: &Right: &Top: &Top: &Bottom: &Bottom: F&irst Page Number: F&irst Page Number: &Default Unit: &Default Unit: &Automatic Text Frames &Automatic Text Frames &Gap: &Gap: Colu&mns: Colu&mns: &OK &OK &Cancel &Cancel &Inside: &Inside: O&utside: O&utside: Executive Executive Folio Folio Ledger Ledger &New Document Open &Existing Document Open Recent &Document Do not show this dialog again Initial number of pages of the document N&umber of Pages: Open Open New from Template Open Existing Document Open Recent Document First Page is: Show Document Settings After Creation Document Layout New &from Template NewFromTemplatePlugin New &from Template... New &from Template... Load documents with predefined layout Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). NewMarginWidget Form Preset Layouts: Left: Right: Top: Bottom: Link Link Printer Margins... Distance between the top margin guide and the edge of the page Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: &Inside: &Left: &Left: O&utside: O&utside: &Right: &Right: NewTm Left Page Left Page Right Page Right Page &OK &OK &Cancel &Cancel NodePalette Nodes Nodes Reset all edits Move Nodes Move Nodes Move Control Points Move Control Points Add Nodes Add Nodes Delete Nodes Delete Nodes Reset Control Points Reset Control Points Reset this Control Point Reset this Control Point When checked use Coordinates relative to the Page, otherwise Coordinates are relative to the Object. When checked use Coordinates relative to the Page, otherwise Coordinates are relative to the Object. &Absolute Coordinates &Absolute Coordinates &X-Pos: &X-Pos: &Y-Pos: &Y-Pos: Edit &Contour Line Edit &Contour Line &Reset Contour Line &Reset Contour Line &End Editing &End Editing Move Control Points Independently Move Control Points Independently Move Control Points Symmetrical Move Control Points Symmetrical Open a Polygon or Cuts a Bezier Curve Open a Polygon or Cuts a Bezier Curve Close this Bezier Curve Close this Bezier Curve Mirror the Path Horizontally Mirror the Path Horizontally Mirror the Path Vertically Mirror the Path Vertically Shear the Path Horizontally to the Left Shear the Path Horizontally to the Left Shear the Path Vertically Up Shear the Path Vertically Up Shear the Path Vertically Down Shear the Path Vertically Down Rotate the Path Counter-Clockwise Rotate the Path Counter-Clockwise Rotate the Path Clockwise Rotate the Path Clockwise Reduce the Size of the Path by shown % Reduce the Size of the Path by shown % Enlarge the Size of the Path by shown % Enlarge the Size of the Path by shown % Angle of Rotation Angle of Rotation % to Enlarge or Reduce By % to Enlarge or Reduce By Activate Contour Line Editing Mode Activate Contour Line Editing Mode Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % OK OK Cancel Cancel Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By Value to Enlarge or Shrink By Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas to Page Set Shape to Image Clip Set the Shape to the Clipping Path of the Image NotesStylesEditor Notes Styles Editor Add New Style New Style Name Footnotes Endnotes Numbering Range Range Start Number Prefix Suffix Superscript in text Superscript in notes Mark Character Style Note Paragraph Style Auto Height Auto Width Auto Welding Remove if empty Apply Apply Delete Delete OK OK Document Document Section Story Page Page Frame Cancel Cancel Dialog is in adding new notes style mode. After pressing Cancel button dialog will be switched into normal notes styles edit mode. Add Style New notes style will be add to document only after pressing Apply butoton. You cannot switch to different notes style before you apply that new one or press Cancel button and exit from adding mode. Mark`s Character Style Note`s Paragraph Style default No Style No Style Warning! Deleting Notes Style You are going to delete notes style %1. All notes and marks using that style are also going to be deleted. Cancel Adding Notes Styles Editor is in adding new notes style mode. After pressing Cancel button Notes Styles Editor switch into normal notes styles edit mode. OODPlug This document does not seem to be an OpenOffice Draw file. Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... Import &OpenOffice.org Draw... OpenDocument 1.0 Draw (*.odg *.ODG) OpenOffice.org 1.x Draw (*.sxd *.SXD) Imports OpenOffice.org Draw Files Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenOffice.org 1.x Draw Import/export format name This file contains some unsupported features The file could not be imported OSGEditor 3D Properties Load Model ... Clear Model Views Name: Name: Options Options Solid Solid Solid Wireframe Transparent Transparent Wireframe Wireframe Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: Opacity: % % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None None Headlamp White Day Night Hard Primary Blue Red Cube CAD Artwork Field of Vision Angle: Angle: Add View... Remove View OSGEditorDialog Default Add a new View Name: Name: New View Import 3-D Model OdtDialog OpenDocument Importer Options Overwrite Paragraph Styles Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Use document name as a prefix for paragraph styles Use document name as a prefix for paragraph styles Prepend the document name to the paragraph style name in Scribus. Do not ask again Do not ask again Make these settings the default and do not prompt again when importing an OASIS OpenDocument. OK OK Cancel Cancel OldScribusFormat Scribus Document Scribus Document Scribus 1.2.x Document OneClick Basepoint Size Size Width: Width: Length: Length: Height: Height: Angle: Angle: Remember Values OpenPalette empty palette OpenPaletteModel Elements Visible Visible OutlinePalette Element Element Active Visible Visible Printing Printing Locked Name "%1" isn't unique.<br/>Please choose another. Inline Frame Layer: " Group Group Page Page Free Objects Outline Outline Enter a keyword or regular expression to filter the outline. Filter: OutlineValues % % Linewidth OutlineWidget Layer is: active visible invisible printing non printing locked X-Pos: X-Pos: Y-Pos: Y-Pos: PConsole Script Console Script Console PDFExportDialog Save as PDF O&utput to File: O&utput to File: Cha&nge... Cha&nge... Output one file for eac&h page Open PDF after Export &Save &Save Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. Save as Save as PDF Files (*.pdf);;All Files (*) PDF Files (*.pdf);;All Files (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. %1 does not exists and will be created, continue? Cannot create directory: %1 Save As Save As PDFLibCore Saving PDF Exporting Master Page: Exporting Page: Exporting Items on Current Page: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: Page: Date: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occurred, please check available disk space PDFToolBar PDF Tools PDF Tools PDF_Opts Export Range Export Range File Options File Options Left Margin Left Margin Right Margin Right Margin dpi dpi General General Embedding Embedding Available Fonts: Available Fonts: Fonts to embed: Fonts to embed: Page Page Effects Effects sec sec No Effect No Effect Blinds Blinds Box Box Dissolve Dissolve Glitter Glitter Split Split Wipe Wipe Horizontal Horizontal Vertical Vertical Inside Inside Outside Outside Left to Right Left to Right Top to Bottom Top to Bottom Bottom to Top Bottom to Top Right to Left Right to Left Top-left to Bottom-Right Top-left to Bottom-Right Passwords Passwords Settings Settings Screen / Web Screen / Web Printer Printer Solid Colors: Solid Colours: Profile: Profile: Rendering-Intent: Rendering-Intent: Perceptual Perceptual Relative Colorimetric Relative Colourimetric Saturation Saturation Absolute Colorimetric Absolute Colourimetric Images: Images: Don't use embedded ICC profiles Don't use embedded ICC profiles PDF/X-3 Output Intent PDF/X-3 Output Intent Trim Box Trim Box Save as Save as Image Settings Image Settings Automatic Automatic JPEG JPEG Zip Zip None None Maximum Maximum High High Medium Medium Low Low Minimum Minimum Export all pages to PDF Export all pages to PDF Export a range of pages to PDF Export a range of pages to PDF Length of time the page is shown before the presentation starts on the selected page. Length of time the page is shown before the presentation starts on the selected page. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Apply the selected effect to all pages. Apply the selected effect to all pages. Choose a master password which enables or disables all the security features in your exported PDF Choose a master password which enables or disables all the security features in your exported PDF Embed a color profile for solid colors Embed a colour profile for solid colours Embed a color profile for images Embed a colour profile for images Do not use color profiles that are embedded in source images Do not use colour profiles that are embedded in source images Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page &General &General &Fonts &Fonts pt pt mm mm in in p p Determines the PDF compatibility. The default is Acrobat 4.0 which gives the widest compatibility. Choose Acrobat 5.0 if your file has PDF 1.4 features such as transparency or you require 128 bit encryption. PDF/X-3 is for exporting the PDF for commercial printing and is selectable when you have activated color management. Determines the PDF compatibility. The default is Acrobat 4.0 which gives the widest compatibility. Choose Acrobat 5.0 if your file has PDF 1.4 features such as transparency or you require 128 bit encryption. PDF/X-3 is for exporting the PDF for commercial printing and is selectable when you have activated colour management. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Generate PDF Articles, which is useful for navigating linked articles in a PDF. Generate PDF Articles, which is useful for navigating linked articles in a PDF. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF size. Compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF size. Version of compression for images. Automatic allows Scribus to choose the best method. ZIP is good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image loss possible). Leave it set to automatic, unless you have a need for special compression options. Version of compression for images. Automatic allows Scribus to choose the best method. ZIP is good for images with solid colours. JPEG is better at creating smaller PDF files which have many photos (with slight image loss possible). Leave it set to automatic, unless you have a need for special compression options. Downsample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. Downsample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. DPI (Dots Per Inch) for image export. DPI (Dots Per Inch) for image export. Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. Enables presentation effects when using Acrobat Reader in full screen mode. Enables presentation effects when using Acrobat Reader in full screen mode. Show page previews of each page listed above. Show page previews of each page listed above. Type of the display effect. Type of the display effect. Direction of the effect of moving lines for the split and blind effects. Direction of the effect of moving lines for the split and blind effects. Starting position for the box and split effects. Starting position for the box and split effects. Direction of the glitter or wipe effects. Direction of the glitter or wipe effects. Enable the security features in your exported PDF. If you selected Acrobat 4.0, the PDF will be protected by 40 bit encryption. If you selected Acrobat 5.0, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Enable the security features in your exported PDF. If you selected Acrobat 4.0, the PDF will be protected by 40 bit encryption. If you selected Acrobat 5.0, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Colour model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 colour CMYK printer. Color profile for solid colors Colour profile for solid colours Rendering intent for solid colors Rendering intent for solid colours Color profile for images Colour profile for images Rendering intent for images Rendering intent for images Output profile for printing. If possible, get some guidance from your printer on profile selection. Output profile for printing. If possible, get some guidance from your printer on profile selection. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Compression levels: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%) Compression levels: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%) Choose a password for users to be able to read your PDF. Choose a password for users to be able to read your PDF. Allow printing of the PDF. If un-checked, printing is prevented. Allow printing of the PDF. If un-checked, printing is prevented. Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. Allow copying of text or graphics from the PDF. If un-checked, text and graphics cannot be copied. Allow copying of text or graphics from the PDF. If un-checked, text and graphics cannot be copied. Allow adding annotations and fields to the PDF. If un-checked, editing annotations and fileds is prevented. Allow adding annotations and fields to the PDF. If un-checked, editing annotations and fileds is prevented. Create PDF File Create PDF File O&utput to File: O&utput to File: Cha&nge... Cha&nge... &All Pages &All Pages C&hoose Pages C&hoose Pages Compatibilit&y: Compatibilit&y: &Binding: &Binding: Generate &Thumbnails Generate &Thumbnails Save &Linked Text Frames as PDF Articles Save &Linked Text Frames as PDF Articles &Include Bookmarks &Include Bookmarks &Resolution: &Resolution: &Method: &Method: &Quality: &Quality: &Downsample Images to: &Downsample Images to: &Embed all Fonts &Embed all Fonts &>> &>> &<< &<< Show Page Pre&views Show Page Pre&views &Display Duration: &Display Duration: Effec&t Duration: Effec&t Duration: Effect T&ype: Effect T&ype: &Moving Lines: &Moving Lines: F&rom the: F&rom the: D&irection: D&irection: &Apply Effect on all Pages &Apply Effect on all Pages &Use Encryption &Use Encryption &User: &User: &Owner: &Owner: Allow &Printing the Document Allow &Printing the Document Allow &Changing the Document Allow &Changing the Document Allow Cop&ying Text and Graphics Allow Cop&ying Text and Graphics Allow Adding &Annotations and Fields Allow Adding &Annotations and Fields S&ecurity S&ecurity Output &Intended For: Output &Intended For: &Use Custom Rendering Settings &Use Custom Rendering Settings Rendering Settings Rendering Settings Fre&quency: Fre&quency: &Angle: &Angle: S&pot Function: S&pot Function: Simple Dot Simple Dot Line Line Round Round Ellipse Ellipse Use ICC Profile Use ICC Profile C&olor C&olour &Info String: &Info String: Output &Profile: Output &Profile: PDF/X-&3 PDF/X-&3 &Save &Save &Cancel &Cancel Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. PDF Files (*.pdf);;All Files (*) PDF Files (*.pdf);;All Files (*) This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. Compress Text and &Vector Graphics Compress Text and &Vector Graphics En&able Presentation Effects En&able Presentation Effects &Presentation &Presentation &Rotation: &Rotation: &Subset all Fonts &Subset all Fonts Fonts to subset: Fonts to subset: Mirror Page(s) horizontally Mirror Page(s) horizontally Mirror Page(s) vertically Mirror Page(s) vertically PPreview Print Preview Print Preview All All Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Gives a print preview using simulations of generic CMYK inks, instead of RGB colours Enable/disable the C (Cyan) ink plate Enable/disable the C (Cyan) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the M (Magenta) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the Y (Yellow) ink plate Enable/disable the K (Black) ink plate Enable/disable the K (Black) ink plate Anti-alias &Text Anti-alias &Text Anti-alias &Graphics Anti-alias &Graphics Display Trans&parency Display Trans&parency &Display CMYK &Display CMYK &C &C &M &M &Y &Y &K &K &Under Color Removal &Under Colour Removal A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Separation Name Cyan Cyan Magenta Magenta Yellow Yellow Black Black Preview Settings Scaling: Close Close Print... Print... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. File File Enable &Antialiasing Fit to Width Fit to Height Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings Mirror Page(s) Horizontal Mirror Page(s) Vertical Print in Grayscale Convert Spot Colors Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Apply Color Profiles Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins Display Ink Coverage Threshold: % % None None PSLib Processing Master Page: Exporting Page: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PStyleW Properties Properties Tabulators and Indentation Tabulators and Indentation PStyleWBase Properties Properties Page Copy Here Copy Here Move Here Move Here Cancel Cancel Picture Picture File: File Linked Text Linked Text Text Frame Text Frame Text on a Path Text on a Path Paragraphs: Paragraphs: Words: Words: Chars: Chars: Print: Print: Enabled Enabled Disabled Disabled Edit Text... Edit Text... None None The Program The Program is missing! is missing! Warning Warning Copy of Copy of &Paste &Paste Show &Margins Show &Margins Show &Frames Show &Frames Show &Images Show &Images Show &Grid Show &Grid Show G&uides Show G&uides Show &Baseline Grid Show &Baseline Grid Sn&ap to Grid Sn&ap to Grid Sna&p to Guides Sna&p to Guides Original PPI: Original PPI: Actual PPI: Actual PPI: In&fo In&fo &Get Picture... &Get Picture... I&mage Visible I&mage Visible &Update Picture &Update Picture &Edit Picture &Edit Picture &Adjust Frame to Picture &Adjust Frame to Picture &Get Text... &Get Text... &Append Text... &Append Text... &Edit Text... &Edit Text... &Insert Sample Text &Insert Sample Text Is PDF &Bookmark Is PDF &Bookmark Is PDF A&nnotation Is PDF A&nnotation Annotation P&roperties Annotation P&roperties Field P&roperties Field P&roperties &PDF Options &PDF Options &Lock &Lock Un&lock Un&lock Lock Object &Size Lock Object &Size Unlock Object &Size Unlock Object &Size Send to S&crapbook Send to S&crapbook Send to La&yer Send to La&yer &Group &Group Un&group Un&group Le&vel Le&vel Send to &Back Send to &Back Bring to &Front Bring to &Front &Lower &Lower &Raise &Raise &Picture Frame &Picture Frame Pol&ygon Pol&ygon &Outlines &Outlines &Text Frame &Text Frame &Bezier Curve &Bezier Curve Conve&rt to Conve&rt to Cu&t Cu&t &Copy &Copy &Delete &Delete C&lear Contents C&lear Contents Show P&roperties... Show P&roperties... Hide P&roperties... Hide P&roperties... Do you really want to clear all your Text? Do you really want to clear all your Text? PageItem Image Image Text Text Line Line Polygon Polygon Polyline Polyline PathText PathText Symbol Group Group RegularPolygon Arc Spiral Table Copy of Copy of PageItemAttributes None None Relates To Is Parent Of Is Child Of None relationship None &Add &Add Alt+A &Copy &Copy Alt+C Alt+C &Delete &Delete Alt+D C&lear C&lear Alt+L &OK &OK &Cancel &Cancel Name Name Type Type Value Value Parameter Relationship Relationship To Attributes Attributes PageItemAttributesBase Type Type &Add &Add &Copy &Copy Alt+C Alt+C &Delete &Delete C&lear C&lear &OK &OK &Cancel &Cancel PageItem_ImageFrame Picture Picture Image Image Embedded Image File: Original PPI: Actual PPI: Size: Size: Colorspace: Unknown Unknown Page: Page: Pages: Embedded Image missing missing or corrupt missing No Image Loaded PageItem_LatexFrame Error Error Running the external application failed! Could not create a temporary file to run the application! Information Information Running the application "%1" failed! OK OK Running The application "%1" crashed! Application DPI State Finished Render This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? The config file didn't specify a executable path! The application "%1" failed to start! Please check the path: Render Frame No configuration defined to run the application! No application defined Rendering... Render Error PageItem_NoteFrame Endnote frame Footnote frame No Style No Style PageItem_OSGFrame OSG Default 3D Model File: PageItem_PathText Paragraphs: Paragraphs: Lines: Words: Words: Chars: Chars: PageItem_TextFrame No Style No Style Linked Text Linked Text Text Frame Text Frame Paragraphs: Paragraphs: Lines: Words: Words: Chars: Chars: PageLayouts First Page is: Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Normal Normal Arrange Pages Arrange Pages Document Pages: Document Pages: PagePalette_MasterPages Edit Master Pages Duplicate the selected master page Delete the selected master page Add a new master page Import master pages from another document This master page is used at least once in the document. Do you really want to delete master page "%1"? Copy #%1 of %2 &Name: &Name: New Master Page Name: Name: New MasterPage New Master Page %1 Copy #%1 of Copy #%1 of Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: PagePalette_MasterPagesBase Form <<< Return to pages edition PagePalette_Pages This master page is used at least once in the document. Do you really want to delete this master page? Arrange Pages Arrange Pages Available Master Pages: Document Pages: Document Pages: List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them PagePalette_PagesBase Form Available Master Pages: Document Pages: Document Pages: Document Layout PageSelector Page Page of %1 of %1 Go to the first page Go to the previous page Go to the next page Go to the last page Select the current page of %1 number of pages in document of %1 PageSize Letter Letter Legal Legal Ledger Ledger Executive Executive Medium Medium PaintManagerBase Manage Colors and Fills <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> <tr> <td style="border: none;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</p></td></tr></table></body></html> 1 100% {1?} Import colors to the current set from an existing document &Import &Import Create a new color within the current set Create a new colour within the current set Add Edit the currently selected color Edit the currently selected colour &Edit &Edit Make a copy of the currently selected color Make a copy of the currently selected colour D&uplicate D&uplicate Delete the currently selected color Delete the currently selected colour &Delete &Delete Remove unused colors from current document's color set Remove unused colours from current document's colour set &Remove Unused &Remove Unused Color Sets Colour Sets Current Color Set: Current Colour Set: ... Save the current color set Save the current colour set &Save Color Set &Save Colour Set Make the current colorset the default color set Make the current colourset the default colour set OK OK Cancel Cancel PaintManagerDialog Solid Colors Gradients Patterns Scribus Swatches User Swatches Merge Color Set Sort by Name Sort by Color Sort by Type &Import &Import Add &Edit &Edit Load File Load Set Rename Rename New Gradient New Color New Colour Rename Entry Copy of %1 Copy of %1 Selected Colors Do you really want to clear all your gradients? Do you really want to clear all your colors and gradients? Do you really want to clear all your patterns? All Supported Formats All Supported Formats Scribus Gradient Files "*.sgr" (*.sgr *.SGR);; Gimp Gradient Files "*.ggr" (*.ggr *.GGR);; All Files (*) All Files (*) Open Open All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors Information Information The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. &Name: &Name: Choose a Directory Choose a Directory Loading Patterns Choose a Name Choose a Name ParaStyleComboBox No Style No Style PathAlongPathPlugin Path Along Path... Bends a Polygon along a Path. Path Tools Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Starting Point End Point a straight Line Points moving Preview on Canvas Connect First Line with Second Line by using: PathConnectPlugin Connect Paths Connects two Paths. Path Tools Connect 2 Polylines. PathCutPlugin Cut Polygon Cuts a Polygon with a Path. Path Tools Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error Error The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 100% {0°?} 90° 100% {90°?} 180° 100% {180°?} 270° 100% {270°?} PathFinderBase Boolean Path Operations + = Operation ... Swap Shapes Options Options First source shape. Second source shape. The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Stroke: Fill: Keep a copy of the original item after applying the operation Keep Subtracts the second shape from the first shape Exchange the Source Shapes The resulting shape uses the color of the first source shape First Shape The resulting shape uses the color of the second source shape Second Shape The resulting shape uses the colors listed below Stroke Color Stroke Colour Fill Color Fill Colour Result Takes Color from: PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Path Operations Apply fancy boolean operations to paths. PathStrokerPlugin Create Path from Stroke Path Tools Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Choose a Directory All Files (*) All Files (*) Open Open Remove Remove OK OK Cancel Cancel &Name: &Name: All Supported Formats All Supported Formats Rename Rename PatternPropsDialog Pattern Properties pt pt % % Offsets X: X: Y: Y: Scaling X-Scale: Y-Scale: Rotation Skewing Spacing Value: X-Skew: Y-Skew: Angle: Angle: Flip: Close Close PctPlug Importing: %1 Analyzing File: Generating Items PdfImportOptions PDF-Import Importing File: TextLabel Page Range All Pages All Pages Single Page Choose Pages Crop to: Media Box Bleed Box Trim Box Trim Box Crop Box Art Box PdfPlug Importing: %1 Analyzing File: Generating Items Open PDF-File Password Password PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Result Result Search Results for: Search Results for: Preview Preview Select Select Cancel Cancel Size: Size: Resolution: DPI Unknown Unknown Colorspace: &Preview &Preview Alt+P &Select Alt+S PicSearchBase Result Result Search Results for: Search Results for: &Preview &Preview PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Start Search Select a base directory for search Scribus - Image Search The search failed: %1 Search Images Search for: Search for: Start at: Change... Change... Searching Case insensitive search Search recursively Base directory for search does not exist. Please choose another one. PicStatus Pictures Pictures Goto Goto Yes Yes OK OK Missing Missing Search Search Name Name Path Path Page Page Print Print Status Status &OK &OK Manage Pictures Manage Pictures Scribus - Image Search No images named "%1" were found. Close Close Not on a Page JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD Unknown Unknown n/a Information Information Path: Search... Name: Name: Image Image DPI: Format: Format: Colorspace: Size Size Pixels: Scale: Scale: Printed: Layout On Page: Select Select Image Tools Set format specific properties of certain image types, like clipping paths Image Visible Image Effects... Edit Image... Extended Image Properties... Sort by Name Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections More Always on Top Sort by Name Sort by Date Sort by Size Sort by Type Change sortorder Zoom in Zoom out Go to Page Preview Images Only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close Close Information Information File File Name: Name: Path: Size: Size: Date: Image Image Format: Format: Width: Width: Colorspace: Height: Height: DPI: Layers: Embedded Profile: Profile Name: Filter / Search Filters: Filter Displayed Images Search Images Filter Collections ... Criteria << Add Name (Wildcards Allowed) Date Date Size Size Type Type Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s): Image Frame(s): Page(s) Page(s) Position of New Frame(s) Top Left of Margins Top Left of Page Top Left of Bleed Custom Position X: X: Y: Y: Same as Page Margins Same as Page Same as Bleed Custom Size Insert Image into 0 Page(s) 0 Frame(s) Insert Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser... PixmapExportPlugin Save as &Image... Save as &Image... Export As Image Exports selected pages as bitmap images. Save as Image Save as Image Error writing the output file(s). Error writing the output file(s). Export successful The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager unknown error plugin manager Cannot find symbol (%1) plugin manager Plugin: loading %1 plugin manager init failed plugin load error unknown plugin type plugin load error Plugin: %1 loaded plugin manager Plugin: %1 failed to load: %2 plugin manager Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Plugin How to run Type Type Load it? Plugin ID File File Yes Yes No No You need to restart the application to apply the changes. Form PolyVectorDialog Polygon Properties Polygon Properties End Edit PolygonProps Polygon Properties Polygon Properties % % Corn&ers: Corn&ers: &Rotation: &Rotation: &Factor: &Factor: &OK &OK &Cancel &Cancel Number of corners for polygons Number of corners for polygons Degrees of rotation for polygons Degrees of rotation for polygons Sample Polygon Sample Polygon Apply &Factor Apply &Factor Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons A negative value will make the polygon concave (or star shaped), a positive value will make it convex A negative value will make the polygon concave (or star shaped), a positive value will make it convex PolygonWidget Corn&ers: Corn&ers: &Rotation: &Rotation: Apply &Factor Apply &Factor % % &Factor: &Factor: Number of corners for polygons Number of corners for polygons Degrees of rotation for polygons Degrees of rotation for polygons Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Sample Polygon Sample Polygon PolygonWidgetBase Form Corn&ers: Corn&ers: Number of corners for polygons Number of corners for polygons &Rotation: &Rotation: Degrees of rotation for polygons Degrees of rotation for polygons Inner Rotation: Inner C&urvature: Outer Curvature: Sample Polygon Sample Polygon Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Apply &Factor Apply &Factor &Factor: &Factor: A negative value will make the polygon concave (or star shaped), a positive value will make it convex % % PositionSetterWidget Form X-pos: Y-pos: Width: Width: Height: Height: ... Preferences Preferences Preferences General General Document Document Guides Guides Typography Typography Tools Tools Scrapbook Scrapbook Display Display GUI GUI Units Units Points (pt) Points (pt) Millimetres (mm) Millimetres (mm) Inches (in) Inches (in) Picas (p) Picas (p) Menus Menus Paths Paths Page Size Page Size Custom Custom Portrait Portrait Landscape Landscape Margin Guides Margin Guides Autosave Autosave min min Grid Layout Grid Layout Grid Colors Grid Colours Placing Placing Subscript Subscript % % Superscript Superscript Small Caps Small Caps Other Other pt pt Woven silk pyjamas exchanged for blue quartz Woven silk pyjamas exchanged for blue quartz None None Other Options Other Options Preview Preview Small Small Medium Medium To adjust the display drag the ruler below with the Slider. To adjust the display drag the ruler below with the Slider. Choose a Directory Choose a Directory mm mm