getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. @default getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returns a list containing the names of all defined colours in the document. If no document is open, returns a list of the default document colours. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returns the name of the fill colour of the object "name". If "name" is not given the currently selected item is used. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Colour descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). importSVG("string") The "string" must be a valid filename for a SVG image. The text must be UTF8 encoded or 'unicode' string(recommended). importSVG("string") The "string" must be a valid filename for a SVG image. The text must be UTF8 encoded or 'unicode' string(recommended). newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) Delete the named master page. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. AIPlug Importing: %1 Analyzing File: Group%1 Generating Items About Contributions from: Katkıda bulunanlar: &About &Hakkında A&uthors &Yazarlar &Translations Ç&eviriler &Online Ç&evrimiçi &Close &Kapat Development Team: Geliştirme ekibi: Official Documentation: Resmi Belgelendirme: Other Documentation: Diğer belgelendirme: Homepage Anasayfa Online Reference Çevrimiçi Dokümanlar Bugs and Feature Requests Hatalar ve özellik istekleri Mailing List Mailing List Official Translations and Translators: Resmi çeviri ve çevirmenler: Previous Translation Contributors: Önceki çevirilere katkıda bulunanlar: About Scribus %1 Scribus %1 Hakkında Windows Port: Windowsa uyarlayan: Mac OSX Aqua Port: Mac OSX 'e uyarlayan: Wiki Wiki %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 Ghostscript sürümü: %1 No Ghostscript version available Ghostscript yüklü değil <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribus Sürüm %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: Build ID: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. January Ocak Mac OS&#174; X Aqua Port: Windows&#174; Port: Tango Project Icons: &Updates Check for updates to Scribus. No data from your machine will be transferred off it. OS/2&#174;/eComStation&#8482; Port: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribus Sürümü Check for Updates Abort Update Check Developer Blog &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Yes Evet No Hayır Filename: Version: Sürüm: Enabled: Etkin: Release Date: Sürüm Tarihi: Description: Tanım: Author(s): Yazar(lar): Copyright: License: Lisans: Scribus: About Plug-ins Scribus: Eklentiller hakkında AboutPluginsBase Scribus: About Plug-ins Scribus: Eklentiller hakkında File Name: Dosya Adı: Version: Sürüm: Enabled: Etkin: Release Date: Sürüm Tarihi: Copyright: Telif Hakkı: Author(s): Yazar(lar): Description: Tanım: License: Lisans: &Close K&apat Alt+C Alt+C ActionManager &Image Effects &Resim Efektleri &Tabulators... &Cetvelleyiciler... &New Y&eni &Open... &Aç... &Close K&apat &Save &Kaydet Save &As... &Farklı kaydet... Re&vert to Saved Kaydedilmişe &Dön Collect for O&utput... Çıktı İçin &Topla... Get Text... Metin Al... Append &Text... &Metin Ekle... Get Image... Resim Al... Save &Text... Metni K&aydet... Save Page as &EPS... Sayfayı &EPS biçiminde kaydet... Save as P&DF... P&DF olarak kaydet... Document &Setup... Belge Dü&zeni... &Print... &Yazdır... &Quit Çı&k &Undo Geri &Al &Redo &Yinele &Item Action Mode Öğe işlem ki&pi Cu&t &Kes &Copy K&opyala &Paste &Yapıştır C&lear Contents İçeriği &Temizle Select &All Tümünü S&eç &Deselect All Tümünden seçimi ka&ldır &Search/Replace... Ara/Değ&iştir... C&olors... &Renkler... &Paragraph Styles... &Paragraf Stilleri... &Line Styles... Çiz&gi Stilleri... &Master Pages... &Mastar sayfalar... P&references... &Tercihler... %1 pt %1 pt &Other... &Diğer... &Left &Sol &Center Or&tala &Right Sa&ğ &Block &Blok &Forced &Zorlanmış &%1 % &%1 % &Normal &Normal &Underline Altı Çizil&i Underline &Words Kelimelerin altını çi&z &Strike Through Ü&stü Çizili &All Caps &Büyük harfe çevir Small &Caps &Küçük harfe çevir Su&perscript Su&perscript Su&bscript Su&bscript &Outline Kontü&r D&uplicate Ç&oğalt &Multiple Duplicate &Çoklu Çoğalt&ma &Delete &Sil &Group &Grupla &Ungroup Grubu &çöz Is &Locked Kilitl&i Si&ze is Locked Ölçü ki&litli Lower to &Bottom En &alta gönder Raise to &Top En üste ge&tir &Lower &Alçalt &Raise &Yükselt Send to S&crapbook Al&büme Yolla &Attributes... &Nitelikler... I&mage Visible Resim Görünü&r Is PDF &Bookmark PDF Y&er imidir Is PDF A&nnotation PDF No&tudur Annotation P&roperties Açıklama Ö&zellikleri Field P&roperties Alan Ö&zellikleri &Edit Shape... Ş&ekli düzenle... &Attach Text to Path Metni &Eğriye Ekle &Detach Text from Path Metni Eğri&den Ayır &Combine Polygons Çokgenleri &Birleştir Split &Polygons Çokgenleri Bö&l &Bezier Curve &Bezier eğrisi &Image Frame Resim Çe&rçevesi &Outlines Anahat&lar &Polygon Çokge&n &Text Frame &Metin Çerçevesi &Glyph... &Glyph... Sample Text Örnek Metin &Insert... &Ekle... Im&port... İth&al et... &Delete... &Sil... &Copy... K&opyala... &Move... &Taşı... &Apply Master Page... &Mastar sayfayı uygula... Manage &Guides... Kılavuz &Yönetimi... &Fit in window Pencereye &Sığdır &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails Küçük R&esimler Show &Margins &Kenarlıkları Göster Show &Frames Çerçeveleri &Göster Show &Images Resimleri &Göster Show &Grid &Izgarayı Göster Show G&uides Kıla&vuzları Göster Show &Baseline Grid Show &Baseline Grid Show &Text Chain Metin B&ağlarını Göster Sn&ap to Grid Iz&garaya Yapıştır Sna&p to Guides Kılavuzlara &Yapıştır &Properties Ö&zellikler &Scrapbook &Albüm &Layers &Katmanlar &Bookmarks &Yer imleri &Measurements Ölçü&ler Action &History İşlem &Geçmişi Preflight &Verifier Bas&kı Denetleyicisi &Tools &Araçlar P&DF Tools P&DF Araçları Select Item Öğeyi Seç T&able T&ablo &Shape Ş&ekil &Line Ç&izgi &Freehand Line &Serbest Çizim Rotate Item Öğeyi Döndür Zoom in or out Yakınlaştır veya Uzaklaştır Zoom in Yakınlaştır Zoom out Uzaklaştır Edit Contents of Frame Çerçevenin İçeriğini Düzenle Link Text Frames Metin Çerçevelerini Bağla Unlink Text Frames Metin Çerçevelerinden Bağı Kaldır &Eye Dropper &Renk Alıcı Copy Item Properties Öğe Özelliklerini Kopyala Edit the text with the Story Editor Metin editörü ile düzenle Insert Text Frame Metin Çerçevesi Ekle Insert Image Frame Resim Çerçevesi Ekle Insert Table Tablo Ekle Insert Shape Şekil Ekle Insert Polygon Çokgen Ekle Insert Line Çizgi Ekle Insert Bezier Curve Bezier eğrisi ekle Insert Freehand Line Serbest Çizim Ekle &Manage Pictures &Resim Yönetimi &Hyphenate Text Metni &Tirele &Generate Table Of Contents İçindekiler Tablosu &oluştur &About Scribus &Scribus Hakkında About &Qt &Qt hakkında Toolti&ps Toolti&ps Scribus &Manual... Scribus Kullanım Kılavuz&u... Smart &Hyphen Akıllı T&ireleme Non Breaking &Space Non Breaking &Space Page &Number Sa&yfa Numarası Copyright Telif Hakkı Registered Trademark Tescilli Marka Trademark Marka Tescili Bullet Bullet Em Dash Em Dash En Dash En Dash Figure Dash Figure Dash Quotation Dash Quotation Dash Apostrophe Kesme işareti Straight Double Straight Double Single Left Single Left Single Right Single Right Double Left Double Left Double Right Double Right Single Reversed Single Reversed Double Reversed Double Reversed Single Left Guillemet Single Left Guillemet Single Right Guillemet Single Right Guillemet Double Left Guillemet Double Left Guillemet Double Right Guillemet Double Right Guillemet Low Single Comma Low Single Comma Low Double Comma Low Double Comma CJK Single Left CJK Single Left CJK Single Right CJK Single Right CJK Double Left CJK Double Left CJK Double Right CJK Double Right Toggle Palettes Toggle Palettes S&hadow &Gölge &Low Resolution &Düşük Çözünürlük &Normal Resolution &Normal Çözünürlük &Full Resolution &Tam Çözünürlük Edit Image... Resmi Düzenle... &Update Image Resmi Gün&celle Adjust Frame to Image Çerçeveyi resme ayarla Extended Image Properties Extended Image Properties Show Control Characters Show Control Characters &Align and Distribute &Hizala ve Dağıt Edit Text... Metni Düzenle... New Line Yeni Çizgi Frame Break Frame Break Column Break Column Break Non Breaking Dash Non Breaking Dash Toggle Guides Toggle Guides &Arrange Pages Sayfaları &Tanzim et Dehyphenate Text Tireleri Kaldır Manage Page Properties... Sayfa Özelliklerini Yönet... Rulers relative to Page Cetveller sayfaya bağıntılı Print Previe&w Baskı Öni&zleme &JavaScripts... &JavaScript... Convert to Master Page... Sayfayı Mastar Sayfaya çevir... &Cascade &Cascade &Tile &Tile &About Plug-ins &Eklentiler hakkında More Info... Daha fazla bilgi... Save as &EPS... Paste (&Absolute) Paste Image from Clipboard C&lear &Temizle Colors and Fills... S&tyles... Marks... Notes Styles... &Outline type effect Kontü&r &Transform Adjust Group &Printing Enabled &Flip Horizontally &Flip Vertically Patterns Inline Items Adjust Frame Height to Text Embed Image &Outlines Convert to oulines Anahat&lar &Symbol Anchor Mark Variable Text Reference to Item Reference to Mark Foot/Endnote Edit Mark Update Marks Preview Mode Show Layer Indicators Show Text Frame Columns Show Rulers Snap to Items &Outline Document Outline Palette Kontü&r Symbols Inline Frames Unlink Text Frame with Text Copy Unlink Text Frame with Text Cut Insert Arc Insert Spiral Insert Calligraphic Line Insert PDF Push Button Insert PDF Radio Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Insert 3D Annotation &Update Document Soft &Hyphen Solidus Middle Dot En Space Em Space Thin Space Thick Space Mid Space Hair Space ff fi fl ffi ffl ft st Insert Rows... Insert Columns... Delete Rows Delete Columns Merge Cells Split Cells... Set Row Heights... Set Column Widths... Distribute Rows Evenly Distribute Columns Evenly Adjust Frame to Table Adjust Table to Frame Unweld items Weld items Edit weld item &Frames... Sticky Tools &Fit to Height Fit to Width Show Bleeds &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Kesme işareti Straight Double Unicode 0x0022 Straight Double Single Left Unicode 0x2018 Single Left Single Right Unicode 0x2019 Single Right Double Left Unicode 0x201C Double Left Double Right Unicode 0x201D Double Right Single Reversed Unicode 0x201B Single Reversed Double Reversed Unicode 0x201F Double Reversed Single Left Guillemet Unicode 0x2039 Single Left Guillemet Single Right Guillemet Unicode 0x203A Single Right Guillemet Double Left Guillemet Unicode 0x00AB Double Left Guillemet Double Right Guillemet Unicode 0x00BB Double Right Guillemet Low Single Comma Unicode 0x201A Low Single Comma Low Double Comma Unicode 0x201E Low Double Comma CJK Single Left Unicode 0x300C CJK Single Left CJK Single Right Unicode 0x300D CJK Single Right CJK Double Left Unicode 0x300E CJK Double Left CJK Double Right Unicode 0x300F CJK Double Right &400% &200% {400%?} Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Insert &Render Frame Check for Updates Number of Pages Adjust Image to Frame File Dosya &File Edit Düzenle &Edit Style Stil &Style Item &Item Öğ&e Insert I&nsert E&kle Page Sayfa &Page S&ayfa View &View Gör&üntüle Table &Table Extras E&xtras Ekstra&lar Windows &Windows &Pencereler Help &Help &Yardım Plugin Menu Items Others Unicode Characters Move/Resize Value Indicator New &from Template... Şablo&ndan oluştur... AdjustCmsDialog CMS Settings AlignDistribute DockWidget Align Hizala &Selected Guide: Seçili &Kılavuz: &Relative To: &Align Sides By: ... Distribute Dağıt &Distance: &Mesafe: Reverse Distribution Swap AlignDistributeBase Align and Distribute Hizala ve Dağıt Align Hizala &Selected Guide: Seçili &Kılavuz: Distribute Dağıt &Distance: &Mesafe: AlignDistributePalette Align and Distribute Hizala ve Dağıt Align Hizala &Relative to: İl&işkili: First Selected İlk Seçilen Last Selected Son Seçilen Page Sayfa Margins Kenarlıklar Selection Seçim Align right sides of objects to left side of anchor Align right sides of objects to left side of anchor Align left sides of objects to right side of anchor Align left sides of objects to right side of anchor Align bottoms Altları hizala Align right sides Sağ yanları hizala Align tops of objects to bottom of anchor Align tops of objects to bottom of anchor Center on vertical axis Centre on vertical axis Align left sides Sol yanları hizala Center on horizontal axis Centre on horizontal axis Align bottoms of objects to top of anchor Align bottoms of objects to top of anchor Align tops Üstleri hizala Distribute Dağıt Distribute left sides equidistantly Distribute left sides equidistantly Distribute bottoms equidistantly Distribute bottoms equidistantly Distribute centers equidistantly horizontally Distribute centres equidistantly horizontally Make vertical gaps between objects equal Make vertical gaps between objects equal Distribute centers equidistantly vertically Distribute centres equidistantly vertically Distribute tops equidistantly Distribute tops equidistantly Distribute right sides equidistantly Distribute right sides equidistantly Guide Kılavuz Move Taşı Resize Yeniden boyutlandır <qt>When aligning one side of an item do one of the following:<ul><li>Always move the other side too (preserve existing width and height)</li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> &Selected Guide: Seçili &Kılavuz: Make horizontal gaps between objects equal Make horizontal gaps between objects equal Make horizontal gaps between objects equal to the value specified Make horizontal gaps between objects equal to the value specified Make vertical gaps between objects equal to the value specified Make vertical gaps between objects equal to the value specified &Distance: &Mesafe: Distribute the items with the distance specified Distribute the items with the distance specified None Selected Seçili Yok Some objects are locked. Bazı nesneler kilitli. &Unlock All Tümünü Çö&z Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Align right sides of items to left side of anchor &Align Sides By: Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal When distributing by a set distance, reverse the direction of the distribution of items Swap items to the left Swap items to the right Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left Metni Sola Yasla Align Text Right Metni Sağa Yasla Align Text Center Metni Ortala Align Text Justified Metni Hizala Align Text Forced Justified Metni Hizalamaya Zorla Annot Field Properties Alan Özellikleri Type: Tip: Button Düğme Text Field Metin Kutusu Check Box Check Box Combo Box Combo Box List Box Liste kutusu Properties Özellikler Name: İsim: Tool-Tip: Tool-Tip: Text Metin Border Sınır Color: Renk: None Yok Width: En: Thin İnce Normal Normal Wide Geniş Style: Stil: Solid Dolu Dashed Kesintili Underline Altı Çizili Beveled Kabartma Inset Çökük Other Diğer Read Only Sadece Okunabilir Required Gerekli Don't Export Value Değeri dışarı gönderme Visibility: Görünürlük: Visible Görünür Hidden Gizli No Print Yazdırma Yok No View Görüntüleme Yok Appearance Görünüm Text for Button Down Buton Basılı Metni Text for Roll Over Text for Roll Over Icons Simgeler Use Icons Simgeleri Kullan Remove Kaldır Pressed Basılı Roll Over Roll Over Icon Placement... Simge Yerleşimi... Highlight Highlight Invert Invert Outlined Outlined Push Push Multi-Line Multi-Line Password Şifre Limit of Limit of Characters Karakterler Do Not Scroll Kaydırma Do Not Spell Check İmla denetimi yapma Check Style: Stili kontrol et: Check Kontrol Et Cross Cross Diamond Elmas Circle Çember Star Yıldız Square Kare Default is Checked Öntanımlı işaretli Editable Düzenlenebilir Options Seçenekler Go To Git Submit Form Formu Yolla Reset Form Formu Sıfırla Import Data Veri al Event: Olay: Mouse Up Mouse Butonu Çekildi Mouse Down Mouse butonu basıldı Mouse Enter Mouse Girdi Mouse Exit Mouse Çıktı On Focus On Focus On Blur On Blur Script: Script: Edit... Düzenle... Submit to URL: URL'ye Gönder: Submit Data as HTML Veriyi HTML olarak gönder Import Data from: Verileri al: Destination Yol To File: Dosyaya: Change... Değiştir... Page: Sayfa: X-Pos: X-Pos: pt pt Y-Pos: Y-Pos: Action İşlem Field is formatted as: Alan şu şekilde biçimlendirilmiş: Plain Düz Number Sayı Percentage Yüzde Date Tarih Time Zaman Custom Custom Number Format Sayı Biçimi Decimals: Ondalık: Use Currency Symbol Parabirimi Sembolü Kullan Prepend Currency Symbol Prepend Currency Symbol Formatting Biçimlendirme Percent Format Yüzde Biçimi Date Format Tarih Biçimi Time Format Zaman Biçimi Custom Scripts Kullanıcı Tanımlı Script Format: Biçim: Keystroke: Keystroke: Format Biçim Value is not validated Değer doğrulanmadı Value must be greater than or equal to: Değer şundan büyük ya da eşit olmalı: and less or equal to: ve küçük yada eşit: Custom validate script: Kullanıcı tanımlı doğrulama scripti: Validate Doğrulama Value is not calculated Değer hesaplanmadı Value is the Değer ..dir sum toplam product ürün average ortalama minimum minimum maximum maximum of the following fields: bu alanların: Pick... Seç... Custom calculation script: Kullanıcı tanımlı hesaplama scripti: Calculate Hesapla OK Tamam Cancel İptal Enter a comma separated list of fields here Buraya virgülle ayrılmış alanların listesini girin You need at least the Icon for Normal to use Icons for Buttons You need at least the Icon for Normal to use Icons for Buttons Open Example: Örnek: Selection Change Seçim Değişti Font for use with PDF 1.3: PDF 1.3 ile kullanılacak yazıtipi: Flag is ignored for PDF 1.3 PDF 1.3 için geçerli değil PDF Files (*.pdf);;All Files (*) PDF-Belgeleri (*.pdf);;Tüm Dosyalar (*) JavaScript JavaScript Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) Resimler (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;Tüm Dosyalar (*) Annota Annotation Properties Not Özellikleri Text Metin Link Link External Link Dışarıya Bağlantı External Web-Link Dışarıya Bağlantı (web) Options Seçenekler Icon: Note Comment Key Help NewParagraph Paragraph Insert Cross Cross Circle Çember Annotation is Open Destination Yol pt pt Open PDF-Documents (*.pdf);;All Files (*) PDF-Belgeleri (*.pdf);;Tüm Dosyalar (*) &Type: &Tip: C&hange... D&eğiştir... &Page: S&ayfa: &X-Pos &X-Pos &Y-Pos: &Y-Pos: %1;;All Files (*) Export absolute Filename ApplyMasterPageDialog Normal Normal Apply Master Page Mastar sayfayı uygula &Master Page: &Mastar Sayfa: Apply To Buna uygula Current &page &Mevcut sayfa Alt+P Alt+P &Even pages Çif&t numaralı sayfalar Alt+E Alt+E O&dd pages &Tek numaraları sayfalar Alt+D Alt+D &All pages &Tüm sayfalar Alt+A Alt+A &Within range Sınır&ı içinde Alt+W Alt+W to to Alt+O Alt+O Alt+C Alt+C Apply the selected template to even, odd or all pages within the following range Seçili şablonu aşağıdaki sınırlar içindeki tek sayılı,çift sayılı ya da tüm sayfalara uygula Apply the selected master page to even, odd or all pages within the following range Possible Hyphenation Muhtemel Tireleme Apply to Current &Page &Even Pages O&dd Pages &All Pages &Tüm sayfalar &Within Range ArcVectorBase Edit Arc Start Angle: End Angle: Height: Width: En: End Edit ArcWidgetBase Form Start Angle: End Angle: Sample Polygon Örnek Çokgen ArrowChooser None Yok AspellPlugin Spell-checking support 0.1 Spell Checker Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error AspellPluginBase Spell Check Replacement: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. &Add Word &Change &Exit &Exit Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: Ignore the current text not found in the active dictionary &Ignore &Yoksay Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close Kapat AspellPluginImpl Loaded default Spell Checker Plugin Failed to Initialise. Configuration invalid Spell Checker Plugin Failed to Initialise. No Aspell dictionaries could be found. AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Aspell dictionary. Spell Checker No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Oklar Flow Chart Jigsaw Specials Özel Default Shapes Barcode &Barcode... Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator 12 or 13 digits 8 digits 11 or 12 digits 7 or 8 digits 5 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits and capital letters Variable number of hexadecimal characters Variable number of characters, digits and any symbols. Barcode Error opening file: %1 Barcode incomplete 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type BarcodeGeneratorBase &Type: &Tip: Co&de: Select one of the available barcode type here The numeric representation of the code itself. See the help message below Reset the barcode samples Alt+I If checked, there will be numbers in the barcode too Alt+G Draw arrows to be sure of space next the code Alt+N Generate and include a checksum in barcode Alt+U Alt+U Include the checksum digit in the barcode text Colors Renkler &Background Alt+B Background color - under the code lines &Lines Alt+L Alt+L Color of the lines in barcode &Text &Metin Alt+T Color of the text and numbers Hints and help is shown here Insert Barcode Format Biçim Incl&ude Checksum Digit I&nclude Checksum &Guard Whitespace &Include Text in Barcode Biblio Scrapbook Albüm Scrapbooks (*.scs);;All Files (*) Albümler (*.scs);;Tüm Dosyalar (*) Delete Sil Object Nesne New Entry Yeni Girdi Rename Yeniden isimlendir &New Y&eni &Load... &Yükle... &Save &Kaydet Save &As... &Farklı kaydet... &Close &Kapat &Small &Küçük &Medium &Orta &Large &Büyük &File &Dosya &Preview Öni&zleme &Name: İ&sim: Name "%1" is not unique. Please choose another. "%1" ismi kullanımda. Başka seçin. Choose a Scrapbook Directory Choose a scrapbook file to import Choose a Directory Dizin Seçin Copy To: Move To: Create a new scrapbook page Import a scrapbook file from Scribus <=1.3.2 Close the selected scrapbook Main Hide Directories Open Directories in a new tab Copied Items New Name Scrapbook (*.scs *.SCS) Hide Images Hide Vector files Paste to Page Close Kapat Delete Contents Do you really want to delete all entries? Go up one Directory Configure the scrapbook BookMView Bookmarks Yer imleri Move Bookmark Yerimini taşı Insert Bookmark Yerimi ekle Cancel İptal BookPalette Bookmarks Yer imleri ButtonIcon Icon Placement Icon Placement Layout: Mizanpaj: Caption only Caption only Icon only Sadece simge Caption below Icon Simge altında başlık Caption above Icon Simge üstünde başlık Caption right to Icon Simgenin sağında başlık Caption left to Icon Simgenin solunda başlık Caption overlays Icon Simgeyi kaplayan başlık Scale: Ölçeklendir: Always Daima When Icon is too big Simge çok büyükse Never Asla Scale How: Nasıl ölçeklendirilecek: Proportional Orantılı Non Proportional Orantısı Icon Simge OK Tamam Cancel İptal Reset Sıfırla When Icon is too small Simge çok küçükse CMSPrefs System Profiles Sistem Profilleri Rendering Intents Rendering Intents Monitor profiles can only be changed when no documents are currently opened. Perceptual Algısal Relative Colorimetric Bağıl renk-ölçüsel Saturation Doygunluk Absolute Colorimetric Mutlak Renk-Ölçüsel Default color profile for solid colors on the page Default colour profile for solid colours on the page Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your monitor. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. &Activate Color Management Renk Yönetimini et&kinleştir &Solid Colors: &Solid Colours: &Monitor: &Monitör: P&rinter: &Yazıcı: M&onitor: M&onitor: Pr&inter: &Yazıcı: Sim&ulate Printer on the Screen Yazıcıyı ekran üzerinde &simule et Mark Colors out of &Gamut Mark Colours out of &Gamut Use &Blackpoint Compensation Use &Blackpoint Compensation &RGB Pictures: &RGB Resimler: &CMYK Pictures: &CMYK Resimler: Default color profile for imported CMYK images CMYK Resimler için öntanımlı renk profili Default color profile for imported RGB images RGB Resimler için öntanımlı renk profili Images: Resimler: CMSPrefsBase Form &Activate Color Management Renk Yönetimini et&kinleştir System Profiles Sistem Profilleri &RGB Images: Default color profile for imported RGB images RGB Resimler için öntanımlı renk profili &CMYK Images: Default color profile for imported CMYK images CMYK Resimler için öntanımlı renk profili &RGB Solid Colors: Default color profile for solid RGB colors on the page &CMYK Solid Colors: Default color profile for solid CMYK colors on the page Document Options Simulate printer on Screen Monitor Profile &Monitor: &Monitör: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). P&rinter: &Yazıcı: Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Rendering Intents Rendering Intents Images: Resimler: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Sim&ulate Printer on the Screen Yazıcıyı ekran üzerinde &simule et Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Method of showing colours on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Mark Colors out of &Gamut Mark Colours out of &Gamut Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Document Rendering Intents Use &Blackpoint Compensation Use &Blackpoint Compensation CMYKChoose Edit Color Renk Düzenle CMYK CMYK RGB RGB Web Safe RGB Web Safe RGB New Yeni Old Eski Scribus Swatches User Swatches C: C: M: M: Y: Y: K: K: Dynamic Color Bars Dinamik Renk Çubukları Static Color Bars Statik Renk Çubukları R: R: G: G: B: B: % % HSV-Colormap HSV-Colourmap &Name: İ&sim: Color &Model Renk &Modeli None Yok Is Spot Color Is Spot Colour Is Registration Color Is Registration Colour You cannot create a color named "%1". It is a reserved name for transparent color "%1" ismiyle renk oluşturamazsınız. Bu isim şeffaflık için ayrılmıştır Name of the color is not unique Renk adı zaten mevcut The name of the color already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CStyleP Colors Renkler CWDialog Normal Vision Normal Görüş Protanopia (Red) Protanopia (Kırmızı Körlüğü) Deuteranopia (Green) Deuteranopia (Yeşil Körlüğü) Tritanopia (Blue) Tritanopia (Mavi Körlüğü) Full Color Blindness Tam Renk Körlüğü Merging colors Merging colours Error: Hata: Color %1 exists already! Renk %1 zaten mevcut! Color %1 appended. Renk %1 eklendi. Now opening the color manager. Renk Yönetimi açılıyor. Color Merging Renk Birleştirme Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Color Wheel Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Color Scheme Method Angle: Açı: Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Merge created colors into the document colors Oluşturulan renkleri belge renkleriyle birleştir &Merge Alt+M Replace created colors in the document colors Oluşturulan renkleri belge renkleriyle değiş &Replace &Değiştir Alt+R Leave colors untouched Renkleri olduğu gibi bırak &Cancel Alt+C Alt+C Preview: Sample color scheme. Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Vision Defect Type: C: C: % % M: M: Y: Y: K: K: RGB: HSV: R: R: G: G: B: B: CMYK: H: H: S: S: V: V: Document Belge CWDialogBase CMYK CMYK C: C: M: M: Y: Y: K: K: RGB RGB R: R: G: G: B: B: Document Belge Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Angle: Açı: Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Merge created colors into the document colors Oluşturulan renkleri belge renkleriyle birleştir &Replace &Değiştir Replace created colors in the document colors Oluşturulan renkleri belge renkleriyle değiş Alt+C Alt+C Leave colors untouched Renkleri olduğu gibi bırak Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. % % HSV HSV H: H: S: S: V: V: Canvas X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 Width: %1 Height: %2 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. Seçili renk belgenin renk kümesinde bulunmuyor. Lütfen bu yeni renk için isim girin. Color Not Found Renk Bulunamadı The name you have selected already exists. Please enter a different name for this new color. Seçtiğiniz isim zaten kullanımda. Bu yeni renk için lütfen başka bir isim girin. CanvasMode_FrameLinks Linking Text Frames Metin Çerçevelerini Bağlama Before After CanvasMode_Normal Go to Page %1 Go to URL %1 Go to Page %1 in File %2 Overflow Characters: %1 Page %1 does not exist! Link Target is Web URL. URL: %1 Information Bilgi Link Target is external File. File: %1 Page: %2 All Supported Formats Desteklenen tüm dosya türleri Open CellStyleComboBox No Style CgmPlug Importing: %1 Analyzing File: Generating Items ChTable You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Eğer sağ butona basıp basılı tutarsanız küçük bir önizleme resmi görürsünüz. Insert tuşu aşağıdaki seçime Glyph ekler; Delete tuşu son ekleneni siler CharSelect Select Character: Karakter Seçin: Font: Yazıtipi: Character Class: Karakter Sınıfı: &Insert &Ekle C&lear &Temizle &Close &Kapat Insert the characters at the cursor in the text Karakteri metindeki cursor'a ekle Delete the current selection(s). Seçim(leri) sil. Close this dialog and return to text editing. Bu diyaloğu kapat ve metin düzeltmeye geri dön. Full Character Set Tam Karakter Kümesi Basic Latin Temel Latin Latin-1 Supplement Latin-1 Ek Latin Extended-A Latin Genişletilmiş-A Latin Extended-B Latin Genişletilmiş-B General Punctuation Genel Noktalama Super- and Subscripts Super- ve Subscript Currency Symbols Parabirimi Sembolleri Letterlike Symbols Harf gibi semboller Number Forms Sayı Biçimleri Arrows Oklar Mathematical Operators Matematiksel Operatörler Box Drawing Kutu Çizimi Block Elements Blok Öğeleri Geometric Shapes Geometrik Şekiller Miscellaneous Symbols Çeşitli Semboller Dingbats Dingbats Small Form Variants Small Form Variants Ligatures Bağlayıcılar Specials Özel Greek Yunan Greek Extended Genişletilmiş Yunan Cyrillic Kiril Cyrillic Supplement Kiril Ek Arabic Arap Arabic Extended A Arap Genişletilmiş A Arabic Extended B Arap Genişletilmiş B Hebrew İbranice You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Eğer sağ butona basıp basılı tutarsanız küçük bir önizleme resmi görürsünüz. Insert tuşu aşağıdaki seçime Glyph ekler; Delete tuşu son ekleneni siler Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Error Hata Error reading file %1 - file is corrupted propably. Cannot write file %1 Dosya yazılamıyor:%1 . {1?} Character Palette &Search &Ara Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette CharSelectEnhanced Full Character Set Tam Karakter Kümesi Basic Latin Temel Latin Latin-1 Supplement Latin-1 Ek Latin Extended-A Latin Genişletilmiş-A Latin Extended-B Latin Genişletilmiş-B General Punctuation Genel Noktalama Super- and Subscripts Super- ve Subscript Currency Symbols Parabirimi Sembolleri Letterlike Symbols Harf gibi semboller Number Forms Sayı Biçimleri Arrows Oklar Mathematical Operators Matematiksel Operatörler Box Drawing Kutu Çizimi Block Elements Blok Öğeleri Geometric Shapes Geometrik Şekiller Miscellaneous Symbols Çeşitli Semboller Dingbats Dingbats Small Form Variants Small Form Variants Ligatures Bağlayıcılar Specials Özel Greek Greek Extended Genişletilmiş Yunan Cyrillic Kiril Cyrillic Supplement Kiril Ek Arabic Arap Arabic Extended A Arap Genişletilmiş A Arabic Extended B Arap Genişletilmiş B Hebrew İbranice Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text Karakteri metindeki cursor'a ekle &Insert &Ekle Delete the current selection(s). Seçim(leri) sil. C&lear &Temizle Type in a four digit Unicode value directly here CharStyleComboBox No Style CharTable Delete Sil CharTableView Delete Sil CheckDocument Glyphs missing Glyph kayıp Text overflow Metin taşması Object is not on a Page Nesne bir sayfa üstünde değil Missing Image Bulunamayan resim Image has a DPI-Value less than %1 DPI Resmin DPI değeri %1 DPI altında Object has transparency Nesne şeffaflık içeriyor Object is a PDF Annotation or Field Nesne, PDF notu ya da alanı Object is a placed PDF Nesne yerleştirilmiş bir PDF Document Belge No Problems found Sorun bulunamadı Page Sayfa Free Objects Free Objects Problems found Bazı sorunlar mevcut Preflight Verifier Baskı Denetleyicisi Items Öğeler Problems Sorunlar Current Profile: Mevcut Profil: &Ignore Errors Ha&taları Yoksay OK After Marks update document was changed Transparency used Blendmode used Print/Visible Mismatch Layer "%1" Check again Image is GIF Annotation uses a non TrueType font Image dimension is smaller than its frame Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame Layers Katmanlar Issue(s): %1 Master Pages Mastar Sayfalar Layer Katman Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI ChooseStyles Choose Styles Stilleri Seç Available Styles Mevcut Stiller ClockWidget A A CollectForOutput Choose a Directory Dizin Seçin Cannot create directory: %1 Collecting... Toplanıyor... Warning Uyarı Cannot collect all files for output for file: %1 Bu dizine çıktı için tüm dosyalar toplanamadı: %1 Cannot collect the file: %1 Toplanamayan dosya: %1 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... Toplanıyor... Cannot collect all files for output for file: %1 Bu dizine çıktı için tüm dosyalar toplanamadı: %1 Cannot collect the file: %1 Toplanamayan dosya: %1 ColorListBox None Yok Sort by Name Sort by Color Sort by Type ColorManager Colors Renkler &Import İth&al et &New Y&eni &Edit Düzen&le D&uplicate Ç&oğalt &Delete &Sil &Remove Unused Kullanılmayanları K&aldır Color Sets Renk Kümeleri Current Color Set: Mevcut Renk Kümesi: &Save Color Set Renk Kümesini Ka&ydet Choose a color set to load Yüklenecek renk kümesini seçin Save the current color set Aktif renk kümesini kaydet Remove unused colors from current document's color set Kullanılmayan renkleri aktif belgenin renk kümesinden kaldır Import colors to the current set from an existing document Mevcut belgeden renkleri ithal et Create a new color within the current set Bu küme içinde yeni bir renk oluştur Edit the currently selected color Seçili rengi düzenle Make a copy of the currently selected color Seçili rengin bir kopyasını yarat Delete the currently selected color Şu an seçili olan rengi sil Make the current colorset the default color set Seçili renk setini öntanımlı renk seti yap &Name: İ&sim: Choose a Name Bir isim seçin Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Belgeler (*.sla *.sla.gz *.scd *.scd.gz);;Tüm dosyalar (*) Documents (*.sla *.scd);;All Files (*) Belgeler (*.sla *.scd);;Tüm Dosyalar (*) Copy of %1 %1'in kopyası New Color Yeni Renk Information Bilgi ColorWheel Monochromatic Monochromatic Analogous Analogous Complementary Complementary Split Complementary Split Complementary Triadic Triadic Tetradic (Double Complementary) Tetradic (Double Complementary) Base Color Base Colour Monochromatic Light Monochromatic Light Monochromatic Dark Monochromatic Dark 1st. Analogous 1st. Analogous 2nd. Analogous 2nd. Analogous 1st. Split 1st. Split 2nd. Split 2nd. Split 3rd. Split 3rd. Split 4th. Split 4th. Split 1st. Triadic 1st. Triadic 2nd. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) 3rd. Tetradic (angle opposite) ColorWheelDialog Color Wheel Renk Çarkı Color Renk Name İsim C C M M Y Y K K Select Method: Metodu Seçin: Angle (0 - 90 degrees): Açı (0 - 90 derece): &Merge Colors Renkleri &Birleştir &Replace Colors Renkleri D&eğiştir Merge created colors into the document colors Oluşturulan renkleri belge renkleriyle birleştir Replace created colors in the document colors Oluşturulan renkleri belge renkleriyle değiş Leave colors untouched Renkleri olduğu gibi bırak Merging colors Merging colours Error: Hata: Now opening the color manager. Renk Yönetimi açılıyor. Color Merging Renk Birleştirme Normal Vision Normal Görüş Full Color Blindness Tam Renk Körlüğü Vision Defect: Görüş Kusuru: Cr&eate color... Renk &Oluştur... &Import existing color... Mevcut rengi a&l... &Merge colors Renkleri &Birleştir &Replace colors Renkleri D&eğiştir E&xit E&xit C&olor &Renk New Color Yeni Renk Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Click the wheel to get the base color. It is hue in HSV mode. Click the wheel to get the base colour. It is hue in HSV mode. Sample color scheme Örnek renk taslağı Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Colors of your chosen color scheme Colors of your chosen colour scheme Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Color %1 exists already! Renk %1 zaten mevcut! Color %1 appended. Renk %1 eklendi. C&olor Components... Renk B&ileşenleri... Protanopia (Red) Protanopia (Kırmızı Körlüğü) Deuteranopia (Green) Deuteranopia (Yeşil Körlüğü) Tritanopia (Blue) Tritanopia (Mavi Körlüğü) ColorWheelPlugin &Color Wheel... Renk &Çarkı... Color setting helper Renk ayarları yardımcısı Color selector with color theory included. Renk teorisi içeren renk seçici. ColumnResize Width En CommonStrings &Apply &Uygula &Cancel İp&tal None Yok &OK &Tamam &Save &Kaydet Warning Uyarı None color name Custom CommonStrings, custom page size Single Page Tek Sayfa Double Sided 3-Fold 3-katlama 4-Fold 4-katlama Left Page Sol Sayfa Middle Orta Middle Left Orta Sol Middle Right Orta Sağ Right Page Sağ Sayfa Monday Tuesday Wednesday Thursday Friday Saturday Sunday January Ocak February March April May June July August September October November December Yes Evet No Hayır &Yes &Evet &No &Hayır Normal Normal Left Page Left page location Sol Sayfa Middle Middle page location Orta Middle Left Middle Left page location Orta Sol Middle Right Middle Right page location Orta Sağ Right Page Right page location Sağ Sayfa Normal Default single master page Normal Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Normal Görüş Protanopia (Red) Color Blindness - Red Color Blind Protanopia (Kırmızı Körlüğü) Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranopia (Yeşil Körlüğü) Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanopia (Mavi Körlüğü) Full Color Blindness Color Blindness - Full Color Blindness Tam Renk Körlüğü Custom: Custom Tab Fill Option Özel: Solid Line Düz Çizgi Dashed Line Kesintili Çizgi Dotted Line Noktalı Çizgi Dash Dot Line Kesintili Noktalı Çizgi Dash Dot Dot Line Kesintili-Noktalı-Noktalı Çizgi None Optical Margin Setting Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Gri Tonlama Duotone Colorspace Unknown Colorspace (Unknown) Bilinmeyen PostScript PostScript Text Frame Metin çerçevesi Image Frame Line Çizgi Polygon Çokgen Polyline Çoklu Çizgi Text on a Path Metni Eğriye Oturt PDF 3D Annotation Symbol Group Grupla Regular Polygon Arc Spiral Table Multiple Multiple frame types PDF Push Button PDF Radio Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation Button Düğme RadioButton Textfield Checkbox Combobox Listbox TextAnnot Link Link Default Table Style Default Cell Style Monochrome Colorspace PostScript Level 1 PostScript Level 1 PostScript Level 2 PostScript Level 2 PostScript Level 3 PostScript Level 3 Windows GDI Alt Alt Shift Shift Cmd Ctrl Ctrl Windows Meta Meta Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings Önizleme Ayarları Paste File... Delete Page CopyPageToMasterPageBase Convert Page to Master Page Sayfayı Mastar Sayfa yap Name: İsim: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Yeni Mastar Sayfa %1 Cpalette Normal Normal Horizontal Gradient Yatay Gradyan Vertical Gradient Vertical Gradient Diagonal Gradient Diyagonal Gradyan Cross Diagonal Gradient Çapraz Diyagonal Gradyan Radial Gradient Radyal Gradyan Opacity: Opaklık: % % None Yok Shade: Ton: Edit Line Color Properties Çizgi Rengi Özelliklerini Düzenle Edit Fill Color Properties Doldurma Rengi Özelliklerini Düzenle Saturation of color Renk doygunluğu Normal or gradient fill method Normal veya gradyan doldurma metodu Set the transparency for the color selected Seçili renk için şeffaflığı ayarla Free linear Gradient Serbest çizgisel gradyan Free radial Gradient Serbest Radyal Gradyan X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: Move Vector Vektörü Taşı Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Blend Mode: Blend Mode: Darken Karanlıklaştır Lighten Aydınlat Multiply Multiply Screen Screen Overlay Overlay Hard Light Sert Işık Soft Light Yumuşak Işık Difference Fark Color Dodge Colour Dodge Color Burn Colour Burn Hue Hue Saturation Doygunluk Color Renk Luminosity Luminosity Y: Y: Exclusion Exclusion Solid Dolu Gradient Pattern Custom Create Mesh CreateMode 3DAnnot CreateRange Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Range of Pages De&lete &Sil Alt+L Alt+L Move &Down Alt+D Alt+D Move &Up Alt+U Alt+U Add a Range of Pages Consecutive Pages Even Pages From: To: Buraya: &Add To Range Alt+A Alt+A Odd Pages Comma Separated List Advanced Reordering Page Order Sample Page Order: Page Group Size: &OK &Tamam Alt+O Alt+O &Cancel Alt+C Alt+C CreateRangeBase To: Buraya: Alt+A Alt+A Alt+U Alt+U Alt+D Alt+D De&lete &Sil Alt+L Alt+L &OK &Tamam Alt+O Alt+O Alt+C Alt+C CsvDialog CSV Importer Options CSV Importer Options Field delimiter: Field delimiter: (TAB) (TAB) Value delimiter: Value delimiter: First row is a header First row is a header OK OK Cancel Cancel None None None delimiter CupsOptions Printer Options Yazıcı Seçenekleri Option Seçenek Value Değer Page Set Page Set All Pages Tüm sayfalar Even Pages only Çift numaralı sayfalar Odd Pages only Tek numaraları sayfalar Mirror Mirror No Hayır Yes Evet Orientation Yerleşim Portrait Dikey Landscape Yatay N-Up Printing N-Up Printing Page per Sheet Kağıt başına sayfa Pages per Sheet Kağıt başına sayfa This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * Bu panel, baskı sırasında kullanılan CUPS tercihlerini gösterir. Tam parametreler, kullandığınız yazıcı sürücüsüne bağlıdır. CUPS desteğinin sağlanıp sağlanmadığını öğrenmek için, Yardım>Hakkında bölümüne bakabilirsiniz. C-C-T değerini bulmaya çalışın; bu aktif ve etkin modülleri gösterir. C=CUPS, 2.C=littlecms renk yönetim sistemi, T ise TIFF resim formatı içindir. Eksik kütüphane destekleri * işaretiyle gösterilir CurveWidget Open Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Farklı kaydet Cannot write the file: %1 Dosya yazılamıyor: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog Encoding: Kodlama: Moves to your Document Directory. This can be set in the Preferences. Doküman Dizininize gider. Dizinin yerini Tercihlerden ayarlayabilirsiniz. &Compress File Dosyayı &Sıkıştır &Include Fonts &Yazıtipi dosyalarını da al Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CvgPlug Importing: %1 Analyzing File: Generating Items CwSetColor Set Color Components Renk Bileşenlerini Ayarla CMYK CMYK RGB RGB HSV HSV H: H: S: S: V: V: R: R: G: G: B: B: C: C: M: M: Y: Y: K: K: Set &RGB &RGB Ayarla Set C&MYK C&MYK Ayarla Set &HSV &HSV Ayarla DashEditor Value: Değer: Offset: DeferredTask Cancelled by user Kullanıcı tarafından iptal edildi DelColor Delete Color Rengi Sil None Yok Delete Color: Rengi Sil: Replace With: Bununla değiştir: DelPages Delete Pages Sayfaları Sil to: buraya kadar: Delete From: Buradan: DelStyle Delete Style Stil Sil Delete Style: Stili Sil: Replace With: Bununla değiştir: No Style Stil Yok DialogsAPI Alert - Scribus DocIm Importing failed Importing Word document failed %1 DocInfos Document Information Belge Bilgisi &Title: &Başlık: &Author: &Yazar: &Subject: &Keywords: &Anahtar Kelimeler: Descri&ption: &Tanım: P&ublisher: &Yayıncı: &Contributors: K&atkıda Bulunanlar: Dat&e: &Tarih: T&ype: &Tip: F&ormat: &Biçim: Identi&fier: &Tanımlayıcı: &Source: &Kaynak: &Language: &Dil: &Relation: İlişk&i: Co&verage: &Kapsam: Ri&ghts: &Haklar: Further &Information Da&ha fazla bilgi A person or organisation responsible for making the document available A person or organisation responsible for making the document available A person or organisation responsible for making contributions to the content of the document A person or organisation responsible for making contributions to the content of the document A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc Belge türü ile ilgili An unambiguous reference to the document within a given context such as ISBN or URI İlgili belgenin referansı, muhtemelen ISBN ya da URI gibi resmi bir tanımlayıcı A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a document from which the present document is derived, eg. ISBN or URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI İlgili belgenin referansı, muhtemelen ISBN ya da URI gibi resmi bir tanımlayıcı The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Information about rights held in and over the document, eg. copyright, patent or trademark Belge ile ilgili eldeki haklar, örneğin yayın hakkı, patent vb Documen&t &Belge The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Belgenin içeriğinden sorumlu kişi ya da kuruluş. Scribus belgesinin içine referans olarak gömülebilir; aynı zamanda PDF için metadata olarak kullanılır A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export Belgenin içeriği, konusu ve kısa özeti gibi bilgiler. PDF yapılırken içerik olarak gömülen bir alandır The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files Belge içeriğinin konusu. PDF içinde aramaları kolaylaştırmak için kullanılacaktır The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here Belgenin fiziksel veya dijital özellikleri. Örneğin kağıt boyutu, çözünürlük, MIME türü gibi bilgiler The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH Belgenin yazıldığı dil. Genelde şu biçimdedir:en-GB,tr-TR,en-EN gibi DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Belgeye sayfa numaralandırma kısmı ekler. Yeni kısım, seçtiğinizden yerden hemen sonra eklenir. Delete the currently selected section. Şu an seçili bölümü sil. 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Name: Optional name for section eg. Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. Name: Optional name for section eg. Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. Document Sections Belge Bölümleri &Add &Ekle Alt+A Alt+A &Delete &Sil Alt+D Alt+D Name İsim Shown Gösterilen From Buradan To Buraya Style Stil Start Başlangıç DocSectionsBase Document Sections Belge Bölümleri Name İsim From Buradan To Buraya Style Stil Start Başlangıç &Add &Ekle Alt+A Alt+A &Delete &Sil Alt+D Alt+D Shown Gösterilen DocumentItemAttributes None Yok Relates To İlgilidir Is Parent Of Is Parent Of Is Child Of Is Child Of Text Frames Metin Çerçeveleri Image Frames Resim Çerçeveleri Boolean Bool Integer Tamsayı String Katar Real Number Gerçek Sayı Document Item Attributes Belge Öğesi Nitelikleri &Add &Ekle Alt+A Alt+A &Copy K&opyala Alt+C Alt+C &Delete &Sil Alt+D Alt+D C&lear &Temizle Alt+L Alt+L Name İsim Type Tip Value Değer Parameter Parametre Relationship İlişki Relationship To İlişkili Auto Add To Otomatik Ekle DocumentItemAttributesBase Document Item Attributes Belge Öğesi Nitelikleri Name İsim Type Tip Value Değer Parameter Parametre Relationship İlişki Relationship To İlişkili Auto Add To Otomatik Ekle &Add &Ekle Alt+A Alt+A &Copy K&opyala Alt+C Alt+C &Delete &Sil Alt+D Alt+D C&lear &Temizle Alt+L Alt+L DrwPlug Group%1 Importing: %1 Analyzing File: Generating Items EPSPlug Importing File: %1 failed! Dosya alınıyor: %1 Başarısız oldu! Fatal Error Kritik Hata Analyzing PostScript: Generating Items Converting of %1 images failed! Error Hata Group%1 Importing: %1 EditStyle Edit Style Stilleri Düzenle Character Karakter pt pt None Yok Line Spacing Satır Boşluğu Name of your paragraph style Paragraf stilinizin adı Font of selected text or object Seçili nesne ya da metnin yazıtipi Font Size Yazıtipi ölçüsü Color of text fill Doldurma Metni Rengi Color of text stroke Metin vurgusu rengi Determines the overall height, in line numbers, of the Drop Caps Determines the overall height, in line numbers, of the Drop Caps Spacing above the paragraph Paragrafın üzerinden boşluk Spacing below the paragraph Paragrafın altından boşluk Tabulators and Indentation Cetvelleyici ve Girintileyiciler &Name: İ&sim: &Lines: &Satırlar: % % Distances Mesafeler Fixed Linespacing Sabit Satır Boşluğu Automatic Linespacing Otomatik Satır Boşluğu Align to Baseline Grid Align to Baseline Grid Drop Caps Drop Caps Distance from Text: Metinden Uzaklık: Preview of the Paragraph Style Paragraf Stilinin Önizlemesi Determines the gap between the DropCaps and the Text Determines the gap between the DropCaps and the Text Toggles sample text of this paragraph style Toggles sample text of this paragraph style Name of the style is not unique Stil adı zaten bulunuyor Background Arkaplan Auto Otomatik EditToolBar Edit Düzenle Editor Editor Editor &New Y&eni &Open... &Aç... Save &As... &Farklı kaydet... &Save and Exit Kaydet ve Ç&ık &Exit without Saving Kayde&tmeden çık &Undo Geri &Al &Redo &Yinele Cu&t &Kes &Copy K&opyala &Paste &Yapıştır C&lear &Temizle &Get Field Names Alan adla&rını al &File &Dosya &Edit Düzen&le OK Cancel JavaScripts (*.js);;All Files (*) JavaScript (*.js);;Tüm dosyalar (*) Ctrl+N Ctrl+Z Ctrl+X Ctrl+C Ctrl-V EffectsDialog Image Effects Resim Efektleri Options: Seçenekler: Color: Renk: Shade: Ton: Brightness: Parlaklık: Contrast: Kontrast: Radius: Radius: Value: Değer: Posterize: Posterise: Available Effects Mevcut Efektler Blur Bulanıklaştır Brightness Parlaklık Colorize Renklendir Contrast Kontrast Grayscale Gri Tonlama Invert Invert Posterize Posterise Sharpen Keskinleştir >> >> << << Effects in use Kullanılan Efektler OK Tamam Cancel İptal Color 1: Color 2: Color 3: Color 4: Duotone Tritone Quadtone Curves ExceptHookDialog Script error Script hatası An exception occured while running the script. &Close Exception &Details >> ExportBitmap File exists. Overwrite? Dosya mevcut. Üzerine yazılsın mı? exists already. Overwrite? zaten mevcut. Üzerine yazılsın mı? All Tümü Save as Image Resim olarak Kaydet Insufficient memory for this image size. Error writing the output file(s). Çıktı dosyası yazarken hata oluştu. ExportForm &All pages &Tüm sayfalar Change the output directory Çıktı dizinini değiştir The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Çıktı dizini-resimlerin kaydedileceği yer. Dosya adı 'belgeadı-sayfano.dosyatipi' şeklinde olacaktır Export only the current page Sadece kullanılan sayfayı ihraç et Available export formats Mevcut ihraç biçimleri Choose a Export Directory Dizin Seçin C&hange... D&eğiştir... &Export to Directory: Dizine ihraç &et: Image &Type: Resim &Türü: &Quality: &Kalite: Export as Image(s) Resim olarak ihraç et Options Seçenekler &Resolution: &Çözünürlük: % % dpi dpi Range Aralık &Current page &Mevcut sayfa &Range &Aralık C C Export a range of pages Belli aralıktaki sayfaları ihraç et Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. * tüm sayfalar için. Örneğin 1-5,birinci ile beşinci sayfalar arasındaki sayfalar. Sayfa numaralarını vigülle ayırarak (1,4,5 gibi) de verebilirsiniz. Export all pages Tüm sayfaları ihraç et Resolution of the Images Use 72 dpi for Images intended for the Screen Resimlerin çözünürlüğü Sadece ekranda görüntülenecekse 72 dpi yeterlidir The quality of your images - 100% is the best, 1% the lowest quality Resimlerin kalitesi - %100 en iyi, %1 en düşük kalite &Size: Ö&lçü: Size of the images. 100% for no changes, 200% for two times larger etc. Resimlerin boyutu. %100 değişiklik yok; %50 yarısı, %200 2 katı vs. Image size in Pixels TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Otomatik ExtImageProps Extended Image Properties Genişletilmiş Resim Özellikleri Normal Normal Darken Karanlıklaştır Lighten Aydınlat Hue Hue Saturation Doygunluk Color Renk Luminosity Luminosity Multiply Multiply Screen Screen Dissolve Dissolve Overlay Overlay Hard Light Sert Işık Soft Light Yumuşak Işık Difference Fark Exlusion Exclusion Color Dodge Colour Dodge Color Burn Colour Burn Blend Mode: Blend Mode: Opacity: Opaklık: % % Name İsim Background Arkaplan Layers Katmanlar Don't use any Path Don't use any Path Paths Paths Exclusion Exclusion Live Preview FDialogPreview Size: Ölçü: Title: Başlık: No Title Başlık Yok Author: Yazar: Unknown Bilinmeyen Scribus Document Scribus Belgesi Resolution: Çözünürlük: DPI DPI RGB RGB CMYK CMYK Grayscale Gri Tonlama Colorspace: Colourspace: File Format: FileLoader Some fonts used by this document have been substituted: Bu belgedeki bazı yazitipleri değiştirildi: was replaced by: bununla değişti: FileToolBar File Dosya FlattenPathPlugin Flatten Path Path Tools Flattens a Path Converts a Bezier Path to a Path made of line segments. FontComboH Family: Style: Stil: Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Font Name Yazıtipi Adı Use Font Kullanılacak Yazıtipi Family Style Stil Variant Type Tip Format Biçim Embed in PostScript Subset Subset Access Erişim Used in Doc Path to Font File Path to Font File Unknown font type Bilinmeyen Unknown font format Bilinmeyen User font preview Kullanıcı System font preview Sistem Click to change the value FontPrefs Available Fonts Mevcut Yazıtipleri Font Substitutions Yazıtipi Karşılıkları Additional Paths Diğer yerler Font Name Yazıtipi Adı Replacement Muadili Choose a Directory Dizin Seçin &Available Fonts &Mevcut Yazıtipleri Font &Substitutions &Yazıtipi Karşılıkları Additional &Paths &Diğer yerler &Delete &Sil C&hange... D&eğiştir... A&dd... E&kle... &Remove Ka&ldır Font Name font preview Yazıtipi Adı Use Font font preview Kullanılacak Yazıtipi Embed in: font preview Bunun içine göm: Subset font preview Subset Path to Font File font preview Path to Font File PostScript PostScript Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. Use Font Kullanılacak Yazıtipi Subset Subset Path to Font File Path to Font File FontPrefsTab Available Fonts Mevcut Yazıtipleri Font Substitutions Yazıtipi Karşılıkları Additional Paths Diğer yerler &Available Fonts &Mevcut Yazıtipleri Font Name Yazıtipi Adı Replacement Muadili &Delete &Sil Font &Substitutions &Yazıtipi Karşılıkları C&hange... D&eğiştir... A&dd... E&kle... &Remove Ka&ldır Additional &Paths &Diğer yerler Choose a Directory Dizin Seçin FontPreview Font Name font preview Yazıtipi Adı Doc font preview Doc Type font preview Tip Subset font preview Subset Access font preview Erişim Font Size: Yazıtipi ölçüsü: Fonts Preview font preview Yazıtipi Önizleme Alt+O font preview Alt+O Quick Search: Hızlı Arama: &Search &Ara &Close font preview &Kapat Alt+C font preview Alt+C Append selected font into Style, Font menu font preview Append selected font into Style, Font menu Leave preview font preview Önizlemeyi kapat Typing the text here provides quick searching in the font names. E.g. 'bold' shows all fonts with Bold in name. Searching is case insensitive. Buraya bir metin yazarak hızlı arama yapabilirsiniz. Örneğin; Nimbus yazarak Nimbus ile başlayan tüm fontları listelersiniz. Aramada küçük büyük harf farkı gözetilmez. Start searching Aramaya başla Size of the selected font Seçili yazıtipinin büyüklüğü Woven silk pyjamas exchanged for blue quartz font preview Scribus, Pozitif PC tarafından Türkçeye çevrildi..www.pozitifpc.com User font preview Kullanıcı System font preview Sistem &Append &Ekle Font Name Yazıtipi Adı Doc Doc Type Tip Subset Subset Access Erişim Fonts Preview Yazıtipi Önizleme &Quick Search: &Font Size: Text Metin Sample text to display Se&t Alt+T Reset the text Alt+A Alt+A &Close Alt+C Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default Show Extended Font Information Set the preview text FontPreviewBase Fonts Preview Yazıtipi Önizleme &Search &Ara Font Name Yazıtipi Adı Doc Doc Type Tip Subset Subset Access Erişim Text Metin &Append &Ekle Alt+A Alt+A Alt+C Alt+C FontPreviewPlugin &Font Preview... Yazıtipi Ön&izleme... Font Preview dialog Yazıtipi Önizleme Sorting, searching and browsing available fonts. Mevcut yazıtiplerini arama,sıralama ve tarama. FontReplaceDialog Font Substitution Yazıtipi Değişimi Original Font Orjinal Yazıtipi Substitution Font Yerine geçen yazıtipi Make these substitutions permanent Bu değişiklikler kalıcı olsun This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Bu belge, sisteminizde olmayan bazı yazıtipleri içeriyor. Lütfen bunların yerine uygun yazıtiplerini seçin. İptal'i seçmek belgenin yüklenmesini durduracaktır. Cancels these font substitutions and stops loading the document. Bu yazıtipi değişikliklerini iptal et ve belgenin yüklenmesini durdur. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. Bunu etkin hale getirmek, gelecekteki yeni mizanpajlarda bu değişimlerin kullanılmasına neden olur. Özellikleri Düzenle>Tercihler>Yazıtiplerinden değiştirebilirsiniz. If you select OK, then save, these substitutions are made permanent in the document. Eğer Tamam'ı seçip kaydederseniz, bu değişiklikler belgeniz içinde kalıcı hale gelecektir. FontSelect Select Alternate Font Font Yazıtipi GradientEditor Position: Konum: % % Here you can add, change or remove Color-Stops. Here you can add, change or remove Colour-Stops. Add, change or remove color stops here GradientEditorBase Frame Position: Konum: % % Color: Renk: Opacity: Opaklık: Shade: Ton: GradientPreview Add Stop Remove Stop GradientVectorBase Gradient Vector Start: Başlangıç: / End: Bitiş: Skew: Focal: Scale: Ölçeklendir: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape Snap to other Mesh Points Add Patch Remove Patch GuideManager Manage Guides Kılavuz Yönetimi Horizontal Guides Yatay Kılavuzlar Vertical Guides Dikey Kılavuzlar &Y-Pos: &Y-Pos: &Add &Ekle D&elete &Sil &X-Pos: &X-Pos: A&dd E&kle De&lete &Sil &Lock Guides Kılavuzları &kilitle &Rows: S&atırlar: C&olumns: Süt&unlar: Refer to: Refer to: &Page S&ayfa &Margins &Kenarlıklar &Selection &Seçim &Close &Kapat Rows and Columns - Automatic Guides Satır ve Sütunlar - Otomatik Kılavuzlar Row &Gap Sa&tır Boşluğu Colum&n Gap Sütun B&oşluğu &Update &Güncelle Set the guides in document. Guide manager is still opened but the changes are persistant guide manager Set the guides in document. Guide manager is still opened but the changes are persistant &Apply to All Pages &Tüm Sayfalara Uygula Guide Kılavuz Unit Birim Preview Önizleme There is empty (0.0) guide already Zaten boş bir kılavuz var(0,0) &Single Horizontals Alt+A Alt+A Alt+E Alt+E Verticals Alt+D Alt+D Alt+L Alt+L Appl&y to All Pages Alt+Y &Column/Row &Number: U&se Gap: Alt+S Alt+P Alt+P M&argins S&election Nu&mber: Use &Gap: Alt+G &Misc Delete all guides from the current page Delete Guides from Current &Page Delete all guides from the current document Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages Refer to GuideManagerBase Manage Guides Kılavuz Yönetimi Guide Kılavuz &Add &Ekle Alt+A Alt+A D&elete &Sil Alt+E Alt+E A&dd E&kle Alt+D Alt+D De&lete &Sil Alt+L Alt+L &Lock Guides Kılavuzları &kilitle &Page S&ayfa Alt+P Alt+P HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Üzgünüz; kullanım kılavuzu yok! Güncel dokümanlar için www.pozitifpc.com adresini ziyaret edin. Contents İçerik Link Link Scribus Online Help Scribus Çevrimiçi Yardım &Contents &İçerik &Search &Ara unknown bilinmiyor Find Bul Search Term: Terimi Ara: Se&arch &Ara &New Y&eni &Delete &Sil De&lete All Tü&münü Sil Book&marks &Yer imleri &Print... &Yazdır... E&xit Çı&k Searching is case unsensitive Aramada küçük-büyük harf ayrımı gözetilmiyor New Bookmark Yeni yer imi New Bookmark's Title: Yeni Yer İminin Başlığı: &File &Dosya &Find... &Bul... Find &Next So&nrakini Bul Find &Previous Ön&cekini Bul &Edit Düzen&le Navigation Loading Failed &Add Bookmark Yer imi &Ekle D&elete All Tü&münü Sil &Bookmarks &Yer imleri Scribus Help &Exit &Exit Find &Next... Find &Previous... &Add &Ekle &Quit Çı&k <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowser2 &Contents &İçerik Se&arch &Ara &Search &Ara Book&marks &Yer imleri HelpBrowserNavigation Form &Contents &İçerik Se&arch &Ara Searching is case insensitive &Search &Ara 1 Book&marks &Yer imleri &New Y&eni &Delete &Sil D&elete All Tü&münü Sil HunspellDialog Spelling check complete HunspellDialogBase Check Spelling Text Language: Not in dictionary Ignore Once Ignore All Suggestions Change Change All HunspellPlugin Check Spelling... HyAsk Possible Hyphenation Muhtemel Tireleme Accept Kabul Et Skip Atla Cancel İptal Add to the Exception List Add to the Ignore List HySettings Length of the smallest word to be hyphenated. Tirelenebilecek en küçük kelimenin uzunluğu. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Birbirini takip eden maksimum tireleme sayısı. Limitsiz için 0 verin. &Language: &Dil: &Smallest Word: &En Küçük Kelime: &Hyphenation Suggestions &Tireleme Önerileri Hyphenate Text Automatically &During Typing Metni Yazarken Otomatik Olarak &Tirele A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Enables automatic hyphenation of your text while typing. Metin yazarken otomatik tirelenmesini sağlar. Consecutive Hyphenations &Allowed: Arka &arkaya izin verilen tirelemeler: IdmlPlug Importing: %1 Analyzing File: Generating Items ImageInfoDialog Image Info Resim Bilgisi General Info Genel Bilgi Date / Time: Tarih / Saat: Has Embedded Profile: Gömülü profili var mı: Yes Evet No Hayır Profile Name: Profil Adı: Has Embedded Paths: Gömülü dosya yolu varmı: Has Layers: Katman varmı: EXIF Info EXIF Bilgisi Artist: Sanatçı: Comment: Yorum: User Comment: Kullanıcı Yorumu: Camera Model: Kamera Modeli: Camera Manufacturer: Kamera Üreticisi: Description: Tanım: Copyright: Yayın Hakkı: Scanner Model: Tarayıcı Modeli: Scanner Manufacturer: Tarayıcı Üreticisi: Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. This file contains 2 versions of the data. Choose which one should be imported Use the pdf part Use the ai part The PDF Import plugin could not be found The file could not be imported ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportDialog Choose Styles Stilleri Seç Available Styles Mevcut Stiller ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats Desteklenen tüm dosya türleri ImportIdmlPlugin Import Idml... Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) Imports IDML Files Imports most IDML files into the current document, converting their vector data into Scribus objects. Adobe Indesign IDMS Adobe Indesign IDMS (*.idms *.IDMS) All Supported Formats Desteklenen tüm dosya türleri ImportPSPlugin Import &EPS/PS... &EPS/PS al... Imports EPS Files EPS dosyalarını alır Imports most EPS files into the current document, converting their vector data into Scribus objects. Mevcut belgeye EPS dosyalarını alır ve vektör bilgilerini Scribus nesnesine dönüştürür. PostScript PostScript Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportPdfPlugin Import PDF... Imports PDF Files Imports most PDF files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri The Import plugin cannot handle Postscript files ImportPubPlugin Import PUB... MS Publisher MS Publisher (*.pub *.PUB) Imports PUB Files Imports most MS Publisher files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportShapePlugin Import Dia Shapes... Dia Shapes "*.shape" File Dia Shapes "*.shape" File (*.shape *.SHAPE) Imports Dia shape Files Imports most Dia shapes into the current document, converting their vector data into Scribus objects. Dia shapes "*.shape" File (*.shape *.SHAPE) All Supported Formats Desteklenen tüm dosya türleri ImportSmlPlugin Import Sml... Kivio Stencils "*.sml" File Kivio Stencils "*.sml" File (*.sml *.SML) Imports Sml Files Imports most Kivio stencils into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats Desteklenen tüm dosya türleri Imposition Portrait Dikey Landscape Yatay ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Alt+U Front side Back side &Booklet Pages per sheet 4 8 16 Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Back page from Destination page Size Orientation Yerleşim Width En Height Boy Preview Önizleme Refresh preview &OK &Tamam Alt+G &Cancel Alt+C Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InlinePalette Paste to Item Edit Item Remove Item Inline Frames InsPage Insert Page Sayfa Ekle before Page Sayfadan önce after Page Sayfadan sonra at End Sona Normal Normal Page(s) Sayfa(lar) &Insert &Ekle &Master Page: &Mastar Sayfa: Page Size Sayfa Boyutu &Size: &Ebat: Custom Özel Orie&ntation: &Yerleşim: Portrait Dikey Landscape Yatay &Width: E&n: &Height: &Boy: Move Objects with their Page Nesneleri sayfasıyla birlikte taşı Master Pages Mastar Sayfalar InsertAFrame Open T&ype &Text Frame &Metin Çerçevesi &Image Frame Resim Çe&rçevesi T&able T&ablo Alt+A Alt+A Polygon Çokgen &Location Page Placement Current Page All Pages Tüm sayfalar ... Position of Frame Top Left of Margins Top Left of Page Top Left of Bleed X: Y: Y: Insert Frames &Size Same as the Page Margins Same as the Page Same as the Bleed Same as the Imported Image Height: Width: En: &Options Source Image: There are no options for this type of frame Columns: Gap: Source Document: &OK &Tamam Range of Pages Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertAFrameBase &Text Frame &Metin Çerçevesi &Image Frame Resim Çe&rçevesi T&able T&ablo Alt+A Alt+A Polygon Çokgen Y: Y: Width: En: &OK &Tamam All Pages Tüm sayfalar InsertTable Insert Table Tablo Ekle Number of rows: Satır sayısı: Number of columns: Sütun sayısı: InsertTableColumnsDialog Insert Column(s) Number of Columns: Position: Konum: Before positions After Beginning End InsertTableRowsDialog Insert Row(s) Number of Rows: Position: Konum: Before positions After Beginning End JavaDocs New Script Yeni JavaScript Edit JavaScripts JavaScriptleri Düzenle &Edit... &Düzenle... &Add... E&kle... &Delete &Sil &Close &Kapat &New Script: Yeni Java&Script: &No &Hayır &Yes &Evet Do you really want to delete this script? Bu JavaScripti gerçekten silmek istiyor musunuz? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. KeyManager Action İşlem Current Key Geçerli Tuş Select a Key for this Action Bu işlem için bir tuş seçin ALT+SHIFT+T ALT+SHIFT+T Alt Alt Ctrl Ctrl Shift Shift Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ &No Key T&uş Yok &User Defined Key &Kullanıcı Tanımlı Tuş Set &Key Tuş A&ta Loadable Shortcut Sets Yüklenebilir Kısayol Kümeleri &Load &Yükle &Import... İth&al et... &Export... İ&hraç et... &Reset &Sıfırla Keyboard shortcut sets available to load Yüklenebilecek klavye kısayolu kümeleri Load the selected shortcut set Seçili kısayol kümesini yükle Import a shortcut set into the current configuration Mevcut yapılandırmaya kısayol kümesi ekle Export the current shortcuts into an importable file Şu anki kısayolları alınabilir bir dosyaya yolla Reload the default Scribus shortcuts Scribus'un öntanımlı kısayollarını geri yükle Key Set XML Files (*.ksxml) Kısayol XML dosyaları (*.ksxml) This key sequence is already in use Bu tuş sırası zaten kullanımda Meta Meta Meta+ Meta+ LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options Seçenekler Resolution: Çözünürlük: Automatic Otomatik DPI Program: Use Preamble Status: Error Hata Finished Running No item selected! Editor Editor Information Bilgi An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Insert Symbol LayerPalette Layers Katmanlar Delete Layer Katmanı Sil Name İsim Do you want to delete all objects on this layer too? Bu katmandaki tüm nesneleride silmek ister misiniz? Add a new layer Yeni katman ekle Delete layer Katmanı sil Raise layer Katmanı bir seviye yukarı al Lower layer Katmanı bir seviye düşür Opacity: Opaklık: % % Blend Mode: Blend Mode: Normal Normal Darken Karanlıklaştır Lighten Aydınlat Multiply Multiply Screen Screen Overlay Overlay Hard Light Sert Işık Soft Light Yumuşak Işık Difference Fark Exclusion Exclusion Color Dodge Colour Dodge Color Burn Colour Burn Hue Hue Saturation Doygunluk Color Renk Luminosity Luminosity Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer Duplicate the Current Layer Raise Layer Lower Layer Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Select Objects on Layer - Check to enable selecting. Name of the Layer - Double click on the name of a layer to edit the name LegacyMode All Files (*) Tüm dosyalar (*) Open All Supported Formats Desteklenen tüm dosya türleri LensDialogBase Optical Lens + - Lens Parameters Radius: Radius: Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools Lens Effects Apply fancy lens effects LineFormate Edit Line Styles Çizgi Stillerini Düzenle Copy of %1 %1'in kopyası New Style Yeni Stil Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Belgeler (*.sla *.sla.gz *.scd *.scd.gz);;Tüm dosyalar (*) Documents (*.sla *.scd);;All Files (*) Belgeler (*.sla *.scd);;Tüm Dosyalar (*) &New Y&eni &Edit Düzen&le D&uplicate Ç&oğalt &Delete &Sil &Save &Kaydet &No &Hayır &Yes &Evet &Import İth&al et Do you really want to delete this style? Bu stili gerçekten silmek istiyor musunuz? LineStyleWidget pt pt Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join Solid Line Düz Çizgi Dashed Line Kesintili Çizgi Dotted Line Noktalı Çizgi Dash Dot Line Kesintili Noktalı Çizgi Dash Dot Dot Line Kesintili-Noktalı-Noktalı Çizgi LoadSavePlugin All Files (*) Tüm dosyalar (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found LoremManager Select Lorem Ipsum Doldurma metni seç Author: Yazar: Get More: Daha Fazla Bul: XML File: XML Dosyası: Lorem Ipsum Lorem Ipsum Paragraphs: Paragraflar: Alt+O Alt+O Alt+C Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MarginDialog Margin Guides Kenarlık Kılavuzları Manage Page Properties Sayfa Yönetimi Özellikleri Page Size Sayfa Boyutu &Size: Ö&lçü: Custom Özel Orie&ntation: &Yerleşim: Portrait Dikey Landscape Yatay &Width: E&n: &Height: &Boy: Move Objects with their Page Nesneleri sayfasıyla birlikte taşı Type: Tip: Other Settings Master Page: Normal Normal Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget &Bottom: &Alt: &Top: &Üst: &Right: Sa&ğ: &Left: &Sol: Distance between the top margin guide and the edge of the page Üst kenarlık kılavuzu ile sayfa kenarı arasındaki mesafe Distance between the bottom margin guide and the edge of the page Alt kenarlık kılavuzu ile sayfa kenarı arasındaki mesafe &Inside: İçind&e: O&utside: &Dışında: Preset Layouts: Öntanımlı Mizanpajlar: Apply margin settings to all pages Kenarlık ayarlarını tüm sayfalara uygula Apply the margin changes to all existing pages in the document Kenarlık değişimini belgedeki tüm sayfalara uygula Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Printer Margins... Import the margins for the selected page size from the available printers. Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing master pages in the document Margin Guides Kenarlık Kılavuzları Top: Bottom: Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page Bleeds Inside: Outside: Left: Right: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Mark2Item Mark to Item Mark2ItemDlg Dialog Label: Item: Mark2Mark Anchors Mark to Mark Mark to Item Note mark Mark2MarkDlg Dialog Label: Select marker: MarkAnchor Anchor Mark MarkAnchorDlg Dialog Label: MarkNote Insert Foot/Endnote MarkNoteDlg Dialog Notes Style: MarkVariableText New Mark Edit selected Mark`s label. To create new Mark select "New Mark" in drop list and input new label Edit variable text Mark with Variable Text Edit selected Mark`s label. MarkVariableTextDlg Add new Mark for Variable Text Label: Text to insert: MarksManager Dialog Update All Marks Edit Düzenle Delete Sil Anchors Variable Text Marks to Items Marks to Anchors Notes marks Marks Manager Double click to find mark in text Update all refeence texts for all marks Edit selected mark MasterPagesPalette Edit Master Pages Mastar sayfaları düzenle Do you really want to delete this master page? Bu mastar sayfayı gerçekten silmek istiyor musunuz? &No &Hayır &Yes &Evet &Name: İ&sim: New Master Page Yeni Mastar Sayfa Copy of %1 Kopyası #%1 of Name: İsim: New MasterPage Yeni Mastar Sayfa Copy #%1 of Kopyası #%1 of Normal Normal Duplicate the selected master page Seçili mastar sayfayı çoğalt Delete the selected master page Seçili mastar sayfayı sil Add a new master page Yeni Mastar Sayfa ekle Import master pages from another document Başka bir belgeden mastar sayfa al New Master Page %1 Yeni Mastar Sayfa %1 Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Copy #%1 of %2 This master page is used at least once in the document. Do you really want to delete master page "%1"? Mdup Multiple Duplicate Çoklu Çoğaltma &Number of Copies: Ko&pya Sayısı: &Horizontal Shift: &Yatay Yer Değiştirme: &Vertical Shift: &Dikey Yer Değiştirme: Measurements Distances Mesafeler X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: Açı: Length: Uzunluk: pt pt ° MeasurementsBase Distances Mesafeler X1: X1: 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: Uzunluk: DX: DX: DY: DY: Angle: Açı: Unit: MergeDoc Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Belgeler (*.sla *.sla.gz *.scd *.scd.gz);;Tüm dosyalar (*) Documents (*.sla *.scd);;All Files (*) Belgeler (*.sla *.scd);;Tüm Dosyalar (*) Import Page(s) Sayfa(ları) ithal et from 0 0'dan Create Page(s) Sayfa(ları) Oluştur from %1 %1'den Import Master Page Mastar Sayfa Al &From Document: &Belgeden: Chan&ge... D&eğiştir... &Import Page(s): Sayfa(ları) &ithal et: &Import Master Page &Mastar sayfa al Before Page Sayfadan önce After Page Sayfadan sonra At End Sona &Import İth&al et Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. * tüm sayfalar için. Örneğin 1-5,birinci ile beşinci sayfalar arasındaki sayfalar. Sayfa numaralarını vigülle ayırarak (1,4,5 gibi) de verebilirsiniz. &Select... MeshDistortionDialog + - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset &Sıfırla MeshDistortionPlugin Mesh Distortion... Path Tools Mesh Distortion of Polygons MissingFont Missing Font Eksik Yazıtipi The Font %1 is not installed. Font %1 kurulu değil. Use Kullan instead yerine ModeToolBar Tools Araçlar Angle: Açı: Width: En: Properties... Özellikler... MovePages Move Pages Sayfa(ları) Taşı Copy Page Sayfayı Kopyala Move Page(s): Sayfa(ları) Taşı: Move Page(s) Sayfa(ları) Taşı Before Page Sayfadan önce After Page Sayfadan sonra At End Sona To: Buraya: Number of copies: Kopya Sayısı: Number of Copies: MultiLine Edit Style Stili Düzenle Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join Line Width: Çizgi Genişliği: pt pt % % OK Tamam pt pt Solid Line Düz Çizgi Dashed Line Kesintili Çizgi Dotted Line Noktalı Çizgi Dash Dot Line Kesintili Noktalı Çizgi Dash Dot Dot Line Kesintili-Noktalı-Noktalı Çizgi Name "%1" isn't unique.<br/>Please choose another. zaten var: "%1" .<br/>.Lütfen başka seçin. pt pt MultiProgressDialog Progress İlerleme Overall Progress: Toplam İlerleme: &Cancel %v of %m MultiProgressDialogBase Progress İlerleme Overall Progress: Toplam İlerleme: &Cancel &İptal MultipleDuplicate &Horizontal Shift: &Yatay Yer Değiştirme: &Vertical Shift: &Dikey Yer Değiştirme: &Horizontal Gap: &Vertical Gap: Multiple Duplicate Çoklu Çoğaltma &By Number of Copies &Number of Copies: Ko&pya Sayısı: &Shift Created Items By Alt+S Create &Gap Between Items Of Alt+G Rotation: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Number of Columns: &OK &Tamam &Cancel MultipleDuplicateBase Multiple Duplicate Çoklu Çoğaltma &Number of Copies: Ko&pya Sayısı: &Horizontal Shift: &Yatay Yer Değiştirme: &Vertical Shift: &Dikey Yer Değiştirme: &OK &Tamam MyPlugin My &Plugin Eklentileri&m MyPluginImpl Scribus - My Plugin Scribus - Eklentilerim The plugin worked! Eklenti çalıştı! NewDoc New Document Yeni Belge Page Size Sayfa Boyutu Portrait Dikey Landscape Yatay Margin Guides Kenarlık Kılavuzları Options Seçenekler Document page size, either a standard size or a custom size Belge sayfa ölçüleri, özel ya da standart bir ölçü Orientation of the document's pages Belgenin sayfalarının yerleşimi Width of the document's pages, editable if you have chosen a custom page size Belge sayfalarının eni Height of the document's pages, editable if you have chosen a custom page size Belge sayfalarının boyu First page number of the document Belgenin ilk sayfasının numarası Default unit of measurement for document editing Belge düzenlemede kullanılacak öntanımlı ölçü birimi Create text frames automatically when new pages are added Yeni sayfa eklendiğinde otomatik olarak metin çerçevesi oluştur Distance between automatically created columns Otomatik oluşturulan sütunlar arasındaki mesafe Number of columns to create in automatically created text frames Otomatik metin çerçevesi oluşturulduğunda eklenecek sütun sayısı &Size: Ö&lçü: Orie&ntation: &Yerleşim: &Width: E&n: &Height: &Boy: New from Template Open Existing Document Open Recent Document F&irst Page Number: İ&lk Sayfa Numarası: &Default Unit: Öntanımlı &Birim: &Automatic Text Frames &Otomatik Metin Çerçeveleri &Gap: &Boşluk: Colu&mns: Süt&unlar: Do not show this dialog again Bu ekranı tekrar gösterme Initial number of pages of the document Belgenin ilk halindeki sayfa sayısı N&umber of Pages: Sa&yfa Sayısı: Open &New Document &Yeni Belge Open &Existing Document Mevcut Belgeyi &Aç Open Recent &Document Son &Kullanılan Belgeleri Aç Page Layout Sayfa Mizanpajı First Page is: İlk sayfa: Show Document Settings After Creation Document Layout New &from Template NewFromTemplatePlugin New &from Template... Şablo&ndan oluştur... Load documents with predefined layout Belgeleri öntanımlı mizanpajı ile yükle Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). Kendi oluşturduğunuz veya aldığınız bir şablondan yeni belge oluştur. NewMarginWidget Form Preset Layouts: Öntanımlı Mizanpajlar: Left: Right: Top: Bottom: Link Link Printer Margins... Distance between the top margin guide and the edge of the page Üst kenarlık kılavuzu ile sayfa kenarı arasındaki mesafe Distance between the bottom margin guide and the edge of the page Alt kenarlık kılavuzu ile sayfa kenarı arasındaki mesafe Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: İçind&e: &Left: O&utside: &Dışında: &Right: NodePalette Nodes Nodes Reset all edits Move Nodes Move Nodes Move Control Points Move Control Points Add Nodes Add Nodes Delete Nodes Delete Nodes Reset Control Points Reset Control Points Reset this Control Point Reset this Control Point &Absolute Coordinates &Absolute Coordinates OK Cancel &X-Pos: &X-Pos: &Y-Pos: &Y-Pos: Edit &Contour Line Edit &Contour Line &Reset Contour Line &Reset Contour Line &End Editing &End Editing Move Control Points Independently Move Control Points Independently Move Control Points Symmetrical Move Control Points Symmetrical Open a Polygon or Cuts a Bezier Curve Open a Polygon or Cuts a Bezier Curve Close this Bezier Curve Bu Bezier eğrisini kapat Mirror the Path Horizontally Mirror the Path Horizontally Mirror the Path Vertically Mirror the Path Vertically Shear the Path Horizontally to the Left Shear the Path Horizontally to the Left Shear the Path Vertically Up Shear the Path Vertically Up Shear the Path Vertically Down Shear the Path Vertically Down Rotate the Path Counter-Clockwise Rotate the Path Counter-Clockwise Rotate the Path Clockwise Rotate the Path Clockwise Reduce the Size of the Path by shown % Reduce the Size of the Path by shown % Enlarge the Size of the Path by shown % Enlarge the Size of the Path by shown % Angle of Rotation Angle of Rotation % to Enlarge or Reduce By % to Enlarge or Reduce By Activate Contour Line Editing Mode Activate Contour Line Editing Mode Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By Value to Enlarge or Shrink By Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas to Page Set Shape to Image Clip Set the Shape to the Clipping Path of the Image NotesStylesEditor Notes Styles Editor Add New Style New Style Name Footnotes Endnotes Numbering Range Aralık Start Number Prefix Suffix Superscript in text Superscript in notes Mark Character Style Note Paragraph Style Auto Height Auto Width Auto Welding Remove if empty Apply Uygula Delete Sil OK Document Belge Section Story Page Sayfa Frame Cancel Dialog is in adding new notes style mode. After pressing Cancel button dialog will be switched into normal notes styles edit mode. Add Style New notes style will be add to document only after pressing Apply butoton. You cannot switch to different notes style before you apply that new one or press Cancel button and exit from adding mode. Mark`s Character Style Note`s Paragraph Style default No Style Warning! Deleting Notes Style You are going to delete notes style %1. All notes and marks using that style are also going to be deleted. Cancel Adding Notes Styles Editor is in adding new notes style mode. After pressing Cancel button Notes Styles Editor switch into normal notes styles edit mode. OODPlug This document does not seem to be an OpenOffice Draw file. Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... OpenOffice.org &Draw belgesi al... OpenDocument 1.0 Draw (*.odg *.ODG) OpenOffice.org 1.x Draw (*.sxd *.SXD) Imports OpenOffice.org Draw Files OpenOffice.org Draw dosyası alır Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Mevcut belgeye OpenOffice.org Draw dosyalarını alır ve vektör bilgilerini Scribus nesnesine dönüştürür. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features The file could not be imported OSGEditor 3D Properties Load Model ... Clear Model Views Name: İsim: Options Seçenekler Solid Dolu Solid Wireframe Transparent Transparent Wireframe Wireframe Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: Opaklık: % % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None Headlamp White Day Night Hard Primary Blue Red Cube CAD Artwork Field of Vision Angle: Açı: Add View... Remove View OSGEditorDialog Default Add a new View Name: İsim: New View Import 3-D Model OdtDialog Use document name as a prefix for paragraph styles Belge adını, paragraf stilleri için önad olarak kullan Do not ask again Tekrar sorma OK Tamam Enabling this will overwrite existing styles in the current Scribus document Bunu aktif hale getirmek mevcut Scribus belgelerindeki stillerin üzerine yazar Merge Paragraph Styles Paragraf Stillerini Birleştir Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Merge paragraph styles by nitelikleri. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Prepend the document name to the paragraph style name in Scribus. Prepend the document name to the paragraph style name in Scribus. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Bu ayarları öntanımlı yap ve OASIS OpenDocument belgesi alırken bir daha sorma. Overwrite Paragraph Styles Paragraf stillerinin üstüne yaz OpenDocument Importer Options OpenDocument Aktarıcısı Seçenekleri Cancel İptal OldScribusFormat Scribus Document Scribus Belgesi Scribus 1.2.x Document Scribus 1.2.x Belgesi OneClick Basepoint Size Width: En: Length: Uzunluk: Height: Angle: Açı: Remember Values OpenPalette empty palette OpenPaletteModel Elements Visible Görünür OutlinePalette Element Bileşen Active Visible Görünür Printing Yazdırma Locked Name "%1" isn't unique.<br/>Please choose another. zaten var: "%1" .<br/>.Lütfen başka seçin. Inline Frame Layer: " Group Grup Page Sayfa Free Objects Outline Enter a keyword or regular expression to filter the outline. Filter: OutlineValues % % Linewidth Çizgi Genişliği OutlineWidget Layer is: active visible invisible printing non printing locked X-Pos: X-Pos: Y-Pos: Y-Pos: PDFExportDialog Save as PDF PDF olarak kaydet O&utput to File: D&osyaya kaydet: Cha&nge... D&eğiştir... Output one file for eac&h page Her sayfa için ayrı dos&ya oluştur Open PDF after Export &Save &Kaydet Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. Save as Farklı kaydet PDF Files (*.pdf);;All Files (*) PDF-Belgeleri (*.pdf);;Tüm Dosyalar (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. %1 does not exists and will be created, continue? Cannot create directory: %1 Save As Farklı kaydet PDFLibCore Saving PDF PDF kaydediliyor Exporting Master Page: Exporting Page: Exporting Items on Current Page: Mevcut sayfadaki içerik ihraç ediliyor: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: Sayfa: Date: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occurred, please check available disk space PDFToolBar PDF Tools PDF Araçları PDFlib Saving PDF PDF kaydediliyor Exporting Master Pages: Mastar sayfalar ihraç ediliyor: Exporting Pages: Sayfalar ihraç ediliyor: Exporting Items on Current Page: Mevcut sayfadaki içerik ihraç ediliyor: Page: Sayfa: PPreview Print Preview Baskı Önizleme All Tümü Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Belgenizde şeffaflığı ve şeffaf öğeleri gösterir. Ghostscript 7.07 ya da daha üst bir sürüm gereklidir Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Gives a print preview using simulations of generic CMYK inks, instead of RGB colours Enable/disable the C (Cyan) ink plate C (Cyan) mürekkebi etkinleştir/kapat Enable/disable the M (Magenta) ink plate M (Magenta) mürekkebi etkinleştir/kapat Enable/disable the Y (Yellow) ink plate Y(Yellow) mürekkebi etkinleştir/kapat Enable/disable the K (Black) ink plate K (Black) mürekkebi etkinleştir/kapat Anti-alias &Text Metinleri &Yumuşat (Anti-alias) Anti-alias &Graphics Resimleri &Yumuşat (Anti-alias) Display Trans&parency Şeffaflığı Gös&ter &Display CMYK CMYK &Göster &C &C &M &M &Y &Y &K &K Preview Settings Önizleme Ayarları &Under Color Removal &Under Colour Removal Separation Name Ayrım Adı Cyan Cyan Magenta Magenta Yellow Sarı Black Siyah Scaling: Ölçeklendirme: Print... Yazdır... Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. Resize the scale of the page. Close Kapat File Dosya Enable &Antialiasing Fit to Width Fit to Height Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings Görünüm Ayarları Mirror Page(s) Horizontal Mirror Page(s) Horizontal Mirror Page(s) Vertical Mirror Page(s) Vertical Print in Grayscale Gri tonlamalı yazdır Convert Spot Colors Apply ICC Profiles ICC Profillerini uygula Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. Apply Color Profiles Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins Display Ink Coverage Threshold: % % None PSLib Processing Master Pages: Mastar Sayfalar işleniyor: Exporting Pages: Sayfalar ihraç ediliyor: Processing Master Page: Exporting Page: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PStyleW Properties Özellikler Tabulators and Indentation Cetvelleyici ve Girintileyiciler Drop Caps Drop Caps PStyleWBase Properties Özellikler Tabulators and Indentation Cetvelleyici ve Girintileyiciler PageItem Image Resim Text Metin Line Çizgi Polygon Çokgen Polyline Çoklu Çizgi PathText PathText Symbol Group Grupla RegularPolygon Arc Spiral Table Copy of Kopyası PageItemAttributes None Yok Relates To İlgilidir Is Parent Of Is Parent Of Is Child Of Is Child Of None relationship Page Item Attributes Sayfa Öğesi Nitelikleri &Add &Ekle Alt+A Alt+A &Copy K&opyala Alt+C Alt+C &Delete &Sil Alt+D Alt+D C&lear &Temizle Alt+L Alt+L &OK &Tamam &Cancel Name İsim Type Tip Value Değer Parameter Parametre Relationship İlişki Relationship To İlişkili Attributes Nitelikler PageItemAttributesBase Page Item Attributes Sayfa Öğesi Nitelikleri Name İsim Type Tip Value Değer Parameter Parametre Relationship İlişki Relationship To İlişkili &Add &Ekle Alt+A Alt+A &Copy K&opyala Alt+C Alt+C &Delete &Sil Alt+D Alt+D C&lear &Temizle Alt+L Alt+L &OK &Tamam &Cancel İp&tal PageItem_ImageFrame Picture Resim Preview Settings Önizleme Ayarları Image Resim Embedded Image File: Original PPI: Actual PPI: Size: Ölçü: Colorspace: Colourspace: Unknown Bilinmeyen Page: Sayfa: Pages: Embedded Image missing missing or corrupt missing No Image Loaded PageItem_LatexFrame Error Hata Running the external application failed! Could not create a temporary file to run the application! Information Bilgi Running the application "%1" failed! Running The application "%1" crashed! Application DPI DPI State Finished Render This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? The config file didn't specify a executable path! The application "%1" failed to start! Please check the path: Render Frame No configuration defined to run the application! No application defined Rendering... Render Error PageItem_NoteFrame Endnote frame Footnote frame No Style PageItem_OSGFrame OSG Default 3D Model File: PageItem_PathText Paragraphs: Paragraflar: Lines: Words: Kelimeler: Chars: Karakterler: PageItem_TextFrame No Style Linked Text Bağlı Metin Text Frame Metin çerçevesi Paragraphs: Paragraflar: Lines: Words: Kelimeler: Chars: Karakterler: PageLayouts Page Layout Sayfa Mizanpajı First Page is: İlk sayfa: Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Double sided Çift taraflı Middle Right Orta Sağ Drag pages or master pages onto the trashbin to delete them Sayfa ya da mastar sayfaları silmek için çöp kutusu üzerine sürükleyin Here are all your master pages. To create a new page, drag a master page to the page view below Mastar sayfalarınız burada. Yeni sayfa yaratmak için, bir mastar sayfayı aşağıdaki sayfa görüntüsüne sürükleyin Normal Normal Arrange Pages Sayfaları Tanzim et Available Master Pages: Mevcut Mastar Sayfalar: Document Pages: Belge Sayfaları: Do you really want to delete this master page? Bu mastar sayfayı gerçekten silmek istiyor musunuz? PagePalette_MasterPages Edit Master Pages Mastar sayfaları düzenle Duplicate the selected master page Seçili mastar sayfayı çoğalt Delete the selected master page Seçili mastar sayfayı sil Add a new master page Yeni Mastar Sayfa ekle Import master pages from another document Başka bir belgeden mastar sayfa al This master page is used at least once in the document. Do you really want to delete master page "%1"? Copy #%1 of %2 &Name: İ&sim: New Master Page Yeni Mastar Sayfa Name: İsim: New MasterPage Yeni Mastar Sayfa New Master Page %1 Yeni Mastar Sayfa %1 Copy #%1 of Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: PagePalette_MasterPagesBase Form <<< Return to pages edition PagePalette_Pages This master page is used at least once in the document. Do you really want to delete this master page? Bu mastar sayfayı gerçekten silmek istiyor musunuz? Arrange Pages Sayfaları Tanzim et Available Master Pages: Mevcut Mastar Sayfalar: Document Pages: Belge Sayfaları: List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them PagePalette_PagesBase Form Available Master Pages: Mevcut Mastar Sayfalar: Document Pages: Belge Sayfaları: Document Layout PageSelector %1 of %2 %1 of %2 %1 of %1 %1 of %1 Go to the first page Go to the previous page Go to the next page Go to the last page Select the current page of %1 number of pages in document PageSize Quarto Quarto Foolscap Foolscap Letter Letter Government Letter Government Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium Medium Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E PaintManagerBase Manage Colors and Fills <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> <tr> <td style="border: none;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</p></td></tr></table></body></html> 1 Import colors to the current set from an existing document Mevcut belgeden renkleri ithal et &Import Create a new color within the current set Bu küme içinde yeni bir renk oluştur Add Edit the currently selected color Seçili rengi düzenle &Edit Make a copy of the currently selected color Seçili rengin bir kopyasını yarat D&uplicate Ç&oğalt Delete the currently selected color Şu an seçili olan rengi sil &Delete &Sil Remove unused colors from current document's color set Kullanılmayan renkleri aktif belgenin renk kümesinden kaldır &Remove Unused Kullanılmayanları K&aldır Color Sets Renk Kümeleri Current Color Set: Mevcut Renk Kümesi: ... Save the current color set Aktif renk kümesini kaydet &Save Color Set Renk Kümesini Ka&ydet Make the current colorset the default color set Seçili renk setini öntanımlı renk seti yap OK Cancel PaintManagerDialog Solid Colors Gradients Patterns Scribus Swatches User Swatches Merge Color Set Sort by Name Sort by Color Sort by Type &Import Add &Edit Load File Load Set Rename Yeniden isimlendir New Gradient New Color Yeni Renk Rename Entry Copy of %1 Selected Colors Do you really want to clear all your gradients? Do you really want to clear all your colors and gradients? Do you really want to clear all your patterns? All Supported Formats Desteklenen tüm dosya türleri Scribus Gradient Files "*.sgr" (*.sgr *.SGR);; Gimp Gradient Files "*.ggr" (*.ggr *.GGR);; All Files (*) Tüm dosyalar (*) Open All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors Information Bilgi The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. &Name: İ&sim: Choose a Directory Dizin Seçin Loading Patterns Choose a Name Bir isim seçin ParaStyleComboBox No Style PathAlongPathPlugin Path Along Path... Bends a Polygon along a Path. Path Tools Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Starting Point End Point a straight Line Points moving Preview on Canvas Connect First Line with Second Line by using: PathConnectPlugin Connect Paths Connects two Paths. Path Tools Connect 2 Polylines. PathCutPlugin Cut Polygon Cuts a Polygon with a Path. Path Tools Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error Hata The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 180° 270° PathFinderBase Boolean Path Operations + = Operation ... Swap Shapes Options Seçenekler First source shape. Second source shape. The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Stroke: Fill: Keep a copy of the original item after applying the operation Keep Subtracts the second shape from the first shape Exchange the Source Shapes The resulting shape uses the color of the first source shape First Shape The resulting shape uses the color of the second source shape Second Shape The resulting shape uses the colors listed below Stroke Color Vurgu Rengi Fill Color Doldurma Rengi Result Takes Color from: PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Path Operations Apply fancy boolean operations to paths. PathStrokerPlugin Create Path from Stroke Path Tools Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Dizin Seçin All Files (*) Tüm dosyalar (*) Open Remove Kaldır &Name: İ&sim: All Supported Formats Desteklenen tüm dosya türleri Rename Yeniden isimlendir PatternPropsDialog Pattern Properties pt pt % % Offsets X: Y: Y: Scaling X-Scale: Y-Scale: Rotation Skewing Spacing Value: Değer: X-Skew: Y-Skew: Angle: Açı: Flip: Close Kapat PctPlug Importing: %1 Analyzing File: Generating Items PdfImportOptions PDF-Import Importing File: TextLabel Page Range All Pages Tüm sayfalar Single Page Tek Sayfa Choose Pages Crop to: Media Box Bleed Box Trim Box Trim Box Crop Box Art Box PdfPlug Importing: %1 Analyzing File: Generating Items Open PDF-File Password Şifre PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Result Sonuç Search Results for: Arama sonuçları: Preview Önizleme Select Seç Cancel İptal Size: Ölçü: Resolution: Çözünürlük: DPI DPI Unknown Bilinmeyen RGB RGB CMYK CMYK Grayscale Gri Tonlama Colorspace: Colourspace: &Preview Öni&zleme Alt+P Alt+P &Select Alt+S PicSearchBase Result Sonuç Search Results for: Arama sonuçları: &Preview Öni&zleme Alt+P Alt+P PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Aramayı İptal Et Start Search Select a base directory for search Arama için başlangıç dizini seçin Scribus - Image Search Scribus - Resim Arama The search failed: %1 Arama başarısız oldu: %1 Search Images Search for: Bunu ara: Start at: Change... Değiştir... Searching Case insensitive search Search recursively Base directory for search does not exist. Please choose another one. PicStatus Goto Git Yes Evet OK Tamam Missing Kayıp Search Ara Name İsim Path Yol Page Sayfa Print Yazdır Status Durum Cancel Search Aramayı İptal Et Manage Pictures Resim Yönetimi Scribus - Image Search Scribus - Resim Arama The search failed: %1 Arama başarısız oldu: %1 No images named "%1" were found. "%1" isimli hiç resim bulunamadı. Select a base directory for search Arama için başlangıç dizini seçin Close Kapat Not on a Page JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD Unknown Bilinmeyen RGB RGB CMYK CMYK Grayscale Gri Tonlama n/a Information Bilgi Path: Search... Name: İsim: Image Resim DPI: Format: Biçim: Colorspace: Colourspace: Size Pixels: Scale: Ölçeklendir: Printed: Layout On Page: Select Seç Image Tools Set format specific properties of certain image types, like clipping paths Image Visible Image Effects... Edit Image... Resmi Düzenle... Extended Image Properties... Sort by Name Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections More Always on Top Sort by Name Sort by Date Sort by Size Sort by Type Change sortorder Zoom in Yakınlaştır Zoom out Uzaklaştır Go to Page Preview Images Only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close Kapat Information Bilgi File Dosya Name: İsim: Path: Size: Ölçü: Date: Image Resim Format: Biçim: Width: En: Colorspace: Colourspace: Height: DPI: Layers: Embedded Profile: Profile Name: Profil Adı: Filter / Search Filters: Filter Displayed Images Search Images Filter Collections ... Criteria << Add Name (Wildcards Allowed) Date Tarih Size Type Tip Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s): Image Frame(s): Page(s) Sayfa(lar) Position of New Frame(s) Top Left of Margins Top Left of Page Top Left of Bleed Custom Position X: Y: Y: Same as Page Margins Same as Page Same as Bleed Custom Size Insert Image into 0 Page(s) 0 Frame(s) Insert Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG TIFF PSD EPS/PS PDF JPG2000 emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser... PixmapExportPlugin Save as &Image... Resim olarak &kaydet... Export As Image Resim Olarak Gönder Exports selected pages as bitmap images. Seçili sayfaları bitmap resmi olarak kaydeder. Save as Image Resim olarak Kaydet Error writing the output file(s). Çıktı dosyası yazarken hata oluştu. Export successful The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager Eklenti bulunamıyor unknown error plugin manager bilinmeyen hata Cannot find symbol (%1) plugin manager Sembol bulunamadı (%1) Plugin: loading %1 plugin manager Eklenti: %1 yükleniyor init failed plugin load error init failed unknown plugin type plugin load error bilinmeyen eklenti türü Plugin: %1 loaded plugin manager Eklenti: %1 yüklendi Plugin: %1 failed to load: %2 plugin manager Eklenti: %1 yüklenemedi: %2 Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Eklenti Yöneticisi Plugin Eklenti How to run Nasıl çalışacak Type Tip Load it? Yükle? Plugin ID Eklenti ID File Dosya Yes Evet No Hayır You need to restart the application to apply the changes. Değişikliklerin uygulanması için programı kapatıp açmalısınız. Form PolyVectorDialog Polygon Properties Çokgen Özellikleri End Edit PolygonProps Polygon Properties Çokgen Özellikleri PolygonWidget Corn&ers: Köşe&ler: &Rotation: Dön&dürme: Apply &Factor Apply &Factor % % &Factor: &Factor: Number of corners for polygons Çokgenler için köşe sayısı Degrees of rotation for polygons Çokgenler için döndürme derecesi Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Sample Polygon Örnek Çokgen A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatif değer çokgeni içbükey, pozitifi ise dışbükey yapar PolygonWidgetBase Form Corn&ers: Köşe&ler: Number of corners for polygons Çokgenler için köşe sayısı &Rotation: Degrees of rotation for polygons Çokgenler için döndürme derecesi Inner Rotation: Inner C&urvature: Outer Curvature: Sample Polygon Örnek Çokgen Apply Convex/Concave Factor to change shape of Polygons Apply Convex/Concave Factor to change shape of Polygons Apply &Factor Apply &Factor &Factor: &Factor: A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatif değer çokgeni içbükey, pozitifi ise dışbükey yapar % % PositionSetterWidget Form X-pos: Y-pos: Width: En: Height: ... Preferences Preferences Tercihler General Genel Document Belge Guides Kılavuzlar Typography Tipografi Tools Araçlar Scrapbook Albüm Display Görünüm GUI GUI Paths Yollar Page Size Sayfa Boyutu Custom Özel Portrait Dikey Landscape Yatay Margin Guides Kenarlık Kılavuzları Autosave Otomatik Kaydet min min pt pt Other Options Diğer Seçenekler Preview Önizleme Small Küçük Medium Orta Choose a Directory Dizin Seçin External Tools Dış Araçlar Image Processing Tool Resim İşleme Aracı Printing Yazdırma Default font size for the menus and windows Default font size for the menus and windows Default unit of measurement for document editing Default unit of measurement for document editing Number of lines Scribus wi