getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list 返回文档中所有预设的颜色名称的列表 getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool 显示 "新建文档" 对话窗口。如果用户接受了设定,一个新文挡将被创建。如果用户按取消键,文档将不被创建。如果信文档被创建,返回真。 messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) 生成一个叫 pageName 的新母页,并且打开它来编辑 deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) 删除命名的母页 getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) 在主图形界面窗口缩放文件。动作包括整数值如20.0,100.0,等待。缩放以-100作为记号。 @default getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list 返回文档中所有预设的颜色名称的列表 newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool 显示 "新建文档" 对话窗口。如果用户接受了设定,一个新文挡将被创建。如果用户按取消键,文档将不被创建。如果信文档被创建,返回真。 getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) 生成一个叫 pageName 的新母页,并且打开它来编辑 deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) 删除命名的母页 zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) 在主图形界面窗口缩放文件。动作包括整数值如20.0,100.0,等待。缩放以-100作为记号。 Copy #%1 of Copy #%1 of AIPlug Importing: %1 正在导入 %1 Analyzing File: 正在分析文件: Group%1 组%1 Generating Items 生成物件 About Contributions from: 贡献者: &About &A 关于 A&uthors &U 作者 &Translations &T 翻译 &Online &O 在线资料 &Close &C 关闭 Development Team: 开发团队 Official Documentation: 官方文档: Other Documentation: 其他文档: Homepage 主页 Online Reference 在线参考 Bugs and Feature Requests 纠错和功能请求 Mailing List 邮件列表 Official Translations and Translators: 官方翻译和翻译者: Previous Translation Contributors: 先前翻译贡献者: About Scribus %1 关于 %1 Windows Port: Windows 移植: Mac OSX Aqua Port: Mac OSX Aqua 移植: Wiki Wiki %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 当前Ghostscript版本 %1 No Ghostscript version available Ghostscript版本不可知 <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: 编译 ID: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 这个面板显示Scribus版本,编译日期以及编译进去的库支持。这里C-C-T-F指的是C=littlecms C=CUPS T=TIFF 支持 F=Fontconfig 支持。最后一个字母是渲染器 C=cairo 或者 A=libart。不存在的库支持以*号表示。这个也注明了Scribus检测到的Ghostscript版本号 Mac OS&#174; X Aqua Port: Mac OS&#174; X Aqua 移植: Windows&#174; Port: Windows&#174; 移植: Tango Project Icons: Tange项目图标: &Updates &U 更新 Check for updates to Scribus. No data from your machine will be transferred off it. 检查更新。不会上传您机器上的数据。 OS/2&#174;/eComStation&#8482; Port: OS/2&#174;/eComStation&#8482; 移植: Splash Screen: 启动屏幕: This panel shows the version, build date and compiled in library support in Scribus. 此面板显示版本,创建日期和库支持。 The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 缺失库支持已经被 * 检测出,同时表明Scribus检查的Ghostscript版本。 The Windows version does not use fontconfig or CUPS libraries. Windows版本不使用fontconfig或CUPS库。 <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribus 版本 Check for Updates 检查升级 Abort Update Check 中断升级检查 Developer Blog 开发者博客 &Licence &L 许可 Unable to open licence file. Please check your install directory or the Scribus website for licencing information. 无法开启许可文件,请检查安装的目录或者Scribus网站获取许可信息。 Doc Translators: 文档翻译 Webmasters: 网站管理: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. 无法打开文件 %1。请检查安装目录或Scribus网站获取 %1 信息 AboutPlugins Yes No Filename: 文件名 Version: 版本: Enabled: 启用: Release Date: 发布日期: Description: 描述: Author(s): 作者: Copyright: 版权: License: 授权: Scribus: About Plug-ins Scribus: 关于插件 AboutPluginsBase Scribus: About Plug-ins Scribus: 关于插件 File Name: 文件名: Version: 版本: Enabled: 启用: Release Date: 发布日期: Copyright: 版权: Author(s): 作者: Description: 描述: License: 授权: &Close &C 关闭 Alt+C Alt+C ActionManager &Image Effects &I 图像效果 &Tabulators... &T 制表符... &New &N 新建 &Open... &O 打开... &Close &C 关闭 &Save &S 保存 Save &As... &A 另存为... Re&vert to Saved &V 恢复到已保存 Collect for O&utput... &U 准备输出... Get Text... 导入文本... Append &Text... &T 追加文本... Get Image... 导入图像... Save &Text... &T 保存文本... Save Page as &EPS... &E 页面存为EPS... Save as P&DF... &D 保存为PDF... Document &Setup... &S 文档设置... &Print... &P 打印... &Quit &Q 退出 &Undo &U 撤销 &Redo &R 重做 &Item Action Mode &I 项目动作模式 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 C&lear Contents &L 清除内容 Select &All &A 全选 &Deselect All &D 取消全选 &Search/Replace... &S 查找/替换... C&olors... &O 颜色... &Paragraph Styles... &P 段落样式... &Line Styles... &L 线条样式... &Master Pages... &M 母页... P&references... &R 首选项... %1 pt %1 pt &Other... &O 其他... &Left &L 左边 &Center &C 中间 &Right &R 右边 &Block &B 区块 &Forced &F 强制 &%1 % &%1 % &Normal &N 普通 &Underline &U 下划线 Underline &Words &W 添加下划线 &Strike Through &S 中划线 &All Caps &A 全部大写 Small &Caps &C 小写 Su&perscript &P 上标 Su&bscript &B 下标 &Outline &O 文档结构树 D&uplicate &U 复制 &Multiple Duplicate &M 多重复制 &Delete &D 删除 &Group &G 群组 &Ungroup &U 解散群组 Is &Locked &L 锁定 Si&ze is Locked &Z 大小锁定 Lower to &Bottom 降低到底部(&B ) Raise to &Top &T 升高到顶部 &Lower &L 降低 &Raise &R 升高 Send to S&crapbook &C发送到寄存本 &Attributes... &A 属性... I&mage Visible &M 显示图像 Is PDF &Bookmark &B 为PDF书签 Is PDF A&nnotation &N 为PDF注释 Annotation P&roperties &R 注释属性 Field P&roperties &R 文字域属性 &Edit Shape... &E 编辑形状... &Attach Text to Path &A 附文字到路径 &Detach Text from Path &D 从路径分离文字 &Combine Polygons &C 合并多边形 Split &Polygons &P 分离多边形 &Bezier Curve &B 齐贝尔曲线 &Image Frame &I 图像框 &Outlines &O 轮廓 &Polygon &P 多边形 &Text Frame &T 文本框 &Glyph... &G 符号... Sample Text 示例文本 &Insert... &I 插入... Im&port... &P 导入... &Delete... &D 删除... &Copy... &C 复制... &Move... &M 移动... &Apply Master Page... &A 应用母页... Manage &Guides... &G 管理参考线... &Fit in window &F 符合窗口 &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails &T 缩图 Show &Margins &M 显示边距 Show &Frames &F 显示框体 Show &Images &I 显示图像 Show &Grid &G 显示网格 Show G&uides &U 显示参考线 Show &Baseline Grid &B 显示底线网格 Show &Text Chain &T 显示文本链 Sn&ap to Grid &A 吸附到网格 Sna&p to Guides &P 吸附到参考线 &Properties &P 属性 &Scrapbook &S 寄存本 &Layers &L 图层 &Bookmarks &B 书签 &Measurements &M 尺寸 Action &History &H 动作历史 Preflight &Verifier &V 印前检验器 &Tools &工具 P&DF Tools P&DF 工具 Select Item 选择项目 T&able &A 表格 &Shape &S 形状 &Line &L 线条 &Freehand Line &F 手绘线 Rotate Item 旋转项目 Zoom in or out 放大或缩小 Zoom in 放大 Zoom out 缩小 Edit Contents of Frame 编辑框内容 Link Text Frames 串联文本框 Unlink Text Frames 解链文本框 &Eye Dropper &E 取色器 Copy Item Properties 复制项目属性 Edit the text with the Story Editor 用故事编辑器编辑文本 Insert Text Frame 插入文本框体 Insert Image Frame 插入图像框体 Insert Table 插入表格 Insert Shape 插入形状 Insert Polygon 插入多边形 Insert Line 插入线 Insert Bezier Curve 插入齐贝尔曲线 Insert Freehand Line 插入手绘线 &Manage Pictures &M 管理图片 &Hyphenate Text &H 用连字符连字 &Generate Table Of Contents &G 生成目录索引 &About Scribus &A 关于Scribus About &Qt 关于 &Qt Toolti&ps &P 提示 Scribus &Manual... &M Scribus 使用手册... Smart &Hyphen &H 智能连字符 Non Breaking &Space &S 不间断空格 Page &Number &N 页码 Copyright 版权 Registered Trademark 注册商标 Trademark 商标 Bullet 项目符号 Em Dash Em 破折号 En Dash En 破折号 Figure Dash 图形破折号 Quotation Dash 引用破折号 Apostrophe 上标点 Straight Double 双倍直线 Single Left 单面左边 Single Right 单面右边 Double Left 双面左边 Double Right 双面右边 Single Reversed 单面反转 Double Reversed 双面反转 Single Left Guillemet 左单引号 Single Right Guillemet 右单引号 Double Left Guillemet 左双引号 Double Right Guillemet 右双引号 Low Single Comma 下单逗号 Low Double Comma 下双逗号 CJK Single Left 中日韩左单 CJK Single Right 中日韩右单 CJK Double Left 中日韩双左 CJK Double Right 中日韩双右 Toggle Palettes 切换色板 S&hadow &H 阴影 &Low Resolution &L 底分辨率 &Normal Resolution &N 正常分辨率 &Full Resolution &F 完全分辨率 Edit Image... 编辑图片... &Update Image &U 刷新图片 Adjust Frame to Image 调整框体适应图片大小 Extended Image Properties 图片扩展属性 Show Control Characters 显示控制符 &Align and Distribute &A 对齐和分布 Edit Text... 编辑文本... New Line 新建线条 Frame Break 分框 Column Break 分列 Non Breaking Dash 不间断破折号 Toggle Guides 切换参考线 &Arrange Pages &A 安排页 Dehyphenate Text 取消连字符 Manage Page Properties... 管理页面属性... Rulers relative to Page 标尺相对应于页面 Print Previe&w &W 打印预览 &JavaScripts... &JavaScripts... Convert to Master Page... 转换为母页... &Cascade &C 层叠 &Tile &T 平铺 &About Plug-ins &A 关于插件 More Info... 更多信息... &Printing Enabled &P 打印已经开启 &Flip Horizontally &F 水平翻转 &Flip Vertically &F 垂直翻转 Show Rulers 显示标尺 &Outline Document Outline Palette &O 文档结构树 Solidus Middle Dot 中点 En Space Em Space Thin Space Thick Space Mid Space Hair Space ff fi fi fl fl ffi ffi ffl ffl ft ft st st S&tyles... &T 样式... &Outline type effect &O 大纲 &Outlines Convert to oulines &O 大纲 Paste (&Absolute) &A 完整粘贴 C&lear &L 清除 Insert PDF Push Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Save as &EPS... &E 保存为EPS... Show Text Frame Columns &Frame... &F 框... Preview Mode 预览模式 Show Layer Indicators Patterns... Gradients... 渐变 ... &Transform Send to Patterns Embed Image Sticky Tools &Fit to Height Fit to Width Show Bleeds Symbols Insert Calligraphic Line Insert 3D Annotation Soft &Hyphen &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 上标点 Straight Double Unicode 0x0022 双倍直线 Single Left Unicode 0x2018 单面左边 Single Right Unicode 0x2019 单面右边 Double Left Unicode 0x201C 双面左边 Double Right Unicode 0x201D 双面右边 Single Reversed Unicode 0x201B 单面反转 Double Reversed Unicode 0x201F 双面反转 Single Left Guillemet Unicode 0x2039 左单引号 Single Right Guillemet Unicode 0x203A 右单引号 Double Left Guillemet Unicode 0x00AB 左双引号 Double Right Guillemet Unicode 0x00BB 右双引号 Low Single Comma Unicode 0x201A 下单逗号 Low Double Comma Unicode 0x201E 下双逗号 CJK Single Left Unicode 0x300C 中日韩左单 CJK Single Right Unicode 0x300D 中日韩右单 CJK Double Left Unicode 0x300E 中日韩双左 CJK Double Right Unicode 0x300F 中日韩双右 &400% &400% Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Insert &Render Frame Check for Updates 检查升级 Number of Pages Adjust Image to Frame File 文件 &File &F 文件 Edit 编辑 &Edit &E 编辑 Style 样式 &Style Item &Item &I 效果 Insert 插入 I&nsert &N 插入 Page &Page View &View &V 查看 Extras E&xtras Windows &Windows &W 窗口 Help 帮助 &Help &H 帮助 Plugin Menu Items Others Unicode Characters Move/Resize Value Indicator New &from Template... &F 从模板新建... AdjustCmsDialog CMS Settings CMS 设置 AlignDistribute Align 对齐 &Selected Guide: &S 已选参考线: &Relative To: &Align Sides By: ... Distribute 分布 &Distance: &D 间距: Reverse Distribution Swap AlignDistributeBase Align and Distribute 对齐和分布 Align 对齐 &Selected Guide: &S 已选参考线: Distribute 分布 &Distance: &D 间距: AlignDistributePalette Align and Distribute 对齐和分布 Align 对齐 &Relative to: &R 对应于: First Selected 先选择 Last Selected 后选择 Page Margins 边距 Selection 选择 Align right sides of objects to left side of anchor 对象的右边和锚点的左边对齐 Align left sides of objects to right side of anchor 对象的左边和锚点的右边对齐 Align bottoms 底部对齐 Align right sides 右边对齐 Align tops of objects to bottom of anchor 对象顶部和锚点底部对齐 Center on vertical axis 以垂直轴居中 Align left sides 左边对齐 Center on horizontal axis 以水平轴居中 Align bottoms of objects to top of anchor 对象底部和锚点顶部对齐 Align tops 顶部对齐 Distribute 分布 Distribute left sides equidistantly 左边等距分布 Distribute bottoms equidistantly 底部等距分布 Distribute centers equidistantly horizontally 中间水平等距分布 Make vertical gaps between objects equal 让对象垂直间距相等 Distribute centers equidistantly vertically 中间垂直等距分布 Distribute tops equidistantly 顶部等距分布 Distribute right sides equidistantly 右边等距分布 Guide 参考线 &Selected Guide: &S 已选参考线: Make horizontal gaps between objects equal 让对象水平间距相等 Make horizontal gaps between objects equal to the value specified 让对象水平间距和指定值相等 Make vertical gaps between objects equal to the value specified 让对象垂直间距和指定值相等 &Distance: &D 间距: Distribute the items with the distance specified 按指定的间距分布项目 None Selected 没有选定 Some objects are locked. 某些对象被锁定 &Unlock All &U 全部解锁 Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Align right sides of items to left side of anchor &Align Sides By: Moving (Preserve Size) Resizing (Preserve Opposite Side) <qt>When aligning one side of an item:<ul><li>Always move the other side too (preserve existing width and height), or </li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal When distributing by a set distance, reverse the direction of the distribution of items Swap items to the left Swap items to the right Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left 文本左对齐 Align Text Right 文本右对齐 Align Text Center 文本居中对齐 Align Text Justified 文本两端对齐 Align Text Forced Justified 文本强制两端对齐 Annot Field Properties 域属性 Type: 类型: Button 按钮 Text Field 文本域 Check Box 勾选框 Combo Box 多选框 List Box 列举框 Properties 属性 Name: 名称: Tool-Tip: 工具提示: Text 文本 Border Color: 颜色: None Width: 宽度: Thin Normal 正常 Wide Style: 样式: Solid Dashed Underline 下划线 Beveled 斜面 Inset 凹入 Other 其他 Read Only 只读 Required 必需 Don't Export Value Don't 输出值 Visibility: 可见度: Visible 可见 Hidden 隐蔽 No Print 不可打印 No View 不可查看 Appearance 外观 Text for Button Down 按钮下陷文本 Text for Roll Over 鼠标经过文本 Icons 图标 Use Icons 使用图标 Remove 移除 Pressed 按下 Roll Over 鼠标经过 Icon Placement... 图标位置... Highlight 高亮 Invert 反转 Outlined 概要 Push Multi-Line 多行 Password 密码 Limit of 限制于 Characters 字符 Do Not Scroll 不要滚动 Do Not Spell Check 不拼写检查 Check Style: 勾选样式: Check 勾选 Cross 十字 Diamond 宝石 Circle 圆形 Star 星星 Square 方形 Default is Checked 默认已勾选 Editable 可编辑 Options 选项 Go To 转到 Submit Form 提交表单 Reset Form 清空表单 Import Data 导入数据 Event: 事件: Mouse Up 鼠标上移 Mouse Down 鼠标下移 Mouse Enter 鼠标进入 Mouse Exit 鼠标退出 On Focus 聚焦 On Blur 模糊 Script: 脚本: Edit... 编辑... Submit to URL: 提交到URL地址: Submit Data as HTML 作为HTML来提交数据 Import Data from: 从...导入数据: Destination 目的地 To File: 到文件: Change... 更改... Page: 页: X-Pos: X-坐标: pt pt Y-Pos: Y-坐标: Action 动作 Field is formatted as: 域格式化为: Plain Number 数字 Percentage 百分数 Date 日期 Time 时间 Custom 自定义 Number Format 数字格式 Decimals: 小数位: Use Currency Symbol 使用货币符号 Prepend Currency Symbol 预设货币符号 Formatting 格式 Percent Format 百分数格式 Date Format 日期格式 Time Format 时间格式 Custom Scripts 自定义脚本 Format: 格式: Keystroke: 按键: Format 格式 Value is not validated 为验校值 Value must be greater than or equal to: 值必须大于或等于: and less or equal to: 而且小于或等于: Custom validate script: 自定义验证脚本 Validate 验证 Value is not calculated 没有计算值 Value is the 值是 sum 求和 product 产品 average 平均 minimum 最小值 maximum 最大值 of the following fields: 下面域: Pick... 选择... Custom calculation script: 自定义计算脚本: Calculate 计算 OK 确定 Cancel 取消 Enter a comma separated list of fields here 在此输入以逗号隔开的域列表 You need at least the Icon for Normal to use Icons for Buttons 你最起码需要用于普通的图标来使用按钮的图标 Open 打开 Example: 范例: Selection Change 选择更改 Font for use with PDF 1.3: 用于PDF 1.3的字体: Flag is ignored for PDF 1.3 选项被PDF 1.3所忽略 PDF Files (*.pdf);;All Files (*) PDF 文件 (*.pdf);;全部文件 (*) JavaScript JavaScript Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) 图像 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全部文件 (*) None highlight 高亮 None action 行为 Tooltip: 工具提示: Do Not Export Value 数值不进行导出 Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) 图片 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;全部 (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) 图片 (*.tif *.png *.jpg *.xpm);;%1;;全部 (*) Export absolute Filename 导出完整文件名 Submit format: 提交格式 FDF FDF HTML HTML XFDF XFDF PDF PDF Annota Annotation Properties 注释属性 Text 文本 Link 链接 External Link 外部链接 External Web-Link 外部网页链接 Destination 目的地 pt pt Open 打开 PDF-Documents (*.pdf);;All Files (*) PDF文件 (*.pdf);;全部文件 (*) &Type: &T 类型 C&hange... &H 更改... &Page: &P 页: &X-Pos &X-坐标: &Y-Pos: &Y-坐标: %1;;All Files (*) %1;;全部文件 (*) Export absolute Filename 导出独立文件名 ApplyMasterPageDialog Normal 普通 Apply Master Page 应用母页 &Master Page: &M 母页: Apply To 应用到 Current &page &P 当前页 Alt+P Alt+P &Even pages &偶数页 Alt+E Alt+E O&dd pages &D 奇数页 Alt+D Alt+D &All pages &A 全部页 Alt+A Alt+A &Within range &W 在范围内 Alt+W Alt+W to Alt+O Alt+O Alt+C Alt+C Apply the selected template to even, odd or all pages within the following range 在以下的范围内应用所选的模板到偶数页、奇数页或者全部页面 Apply the selected master page to even, odd or all pages within the following range Possible Hyphenation 可能连字符 Apply to 应用到 Current &Page 当前 &页 &Even Pages O&dd Pages &All Pages &A 全部页面 &Within Range &W 范围之内 ArrowChooser None AspellPlugin Spell-checking support 0.1 Spell Checker Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error AspellPluginBase Spell Check Replacement: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. &Add Word &Change &C 改变 &Exit &E 退出 Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: Ignore the current text not found in the active dictionary &Ignore &I 忽略 Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close 关闭 AspellPluginImpl Loaded default AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in Aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating Aspell speller. Spell Checker No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows 箭头 Flow Chart Jigsaw Specials 特别符号 Default Shapes Barcode &Barcode Generator... &B 条形码生成器... Scribus frontend for Pure Postscript Barcode Writer Scribus 纯Postscript条形码输出前端 &Barcode... &B 条形码... Scribus frontend for Pure PostScript Barcode Writer Scribus 前端 全 BarcodeGenerator Error opening file: %1 打开文件错误:%1 Error creating preview 生成预览错误 12 or 13 digits 8 digits 11 or 12 digits 7 or 8 digits 5 digits 2 digits Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits Variable number of digits and capital letters Variable number of hexadecimal characters Barcode 条形码 Barcode incomplete 条形码不完整 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type 选择种类 Select Barcode Type 选择条形码种类 BarcodeGeneratorBase Barcode Creator 条形码生成器 Barcode 条形码 &Type: &T 类型 C&ode: &O 编码: Select one of the available barcode type here 在此选择一个可用的条形码类型 The numeric representation of the code itself. See the help message below 代表编码的数字。下面有帮助信息可循 Reset the barcode samples 重置条形码范例 &Include text in barcode &I 在条形码中包含文字 Alt+I Alt+I If checked, there will be numbers in the barcode too 如果勾选,在条形码中也会有数字 &Guard whitespace &G 注意留白 Alt+G Alt+G Draw arrows to be sure of space next the code 画箭头确保编码旁的空位 Colors 颜色 &Background &B 背景 Alt+B Alt+B Background color - under the code lines 背景颜色-在编码线下面 &Lines &L 线条 Alt+L Alt+L Color of the lines in barcode 条形码线条的颜色 &Text &T 文本 Alt+T Alt+T Color of the text and numbers 文字和数字的颜色 Hints and help is shown here 这里显示诀窍和帮助 Preview of the result. 72dpi sample. 预览效果。72dpi 的范例。 Co&de: &D 代码 Alt+N Alt+N Generate and include a checksum in barcode Alt+U Alt+U Include the checksum digit in the barcode text Insert Barcode 插入条形码 Format 格式 Incl&ude Checksum Digit I&nclude Checksum &Guard Whitespace &Include Text in Barcode &I 在条形码中包含文字 Biblio Scrapbook 寄存本 Scrapbooks (*.scs);;All Files (*) 寄存本 (*.scs);;全部文件 (*) Delete 删除 Object 对象 New Entry 新项目 Rename 重命名 &New &N 新建 &Load... &L 加载... &Save &S 保存 Save &As... &A 保存为... &Close &C 关闭 &Small &S 小 &Medium &M 中 &Large &L 大 &File &F 文件 &Preview &P 预览 &Name: &N 名称: Name "%1" is not unique. Please choose another. 名称 "%1"非唯一,请另选 Choose a Scrapbook Directory 选择寄存本路径 Choose a Directory 选择一个路径 Choose a scrapbook file to import 选择要导入的寄存本文件 Create a new scrapbook page 创建一个新的寄存本页面 Load an existing scrapbook 读取一个已经存在的寄存本 Save the selected scrapbook 保存选定的寄存本 Import an scrapbook file from Scribus <=1.3.2 从 Scribus <=1.3.2 导入一个寄存本文件 Close the selected scrapbook 关闭选定的寄存本 Copy To: 复制到 Move To: 移动到 Main 主要 Copied Items 复制的物件 New Name 新名字 Scrapbook (*.scs *.SCS) 寄存本 (*.scs *.SCS) Hide Directorys Hide Images Hide Vector files Open Directorys in a new tab Paste to Page 粘贴到页面 Save as... 保存为 ... Close 关闭 Delete Contents 删除内容 Do you really want to delete all entries? 真的要删除全部 Go up one Directory Import a scrapbook file from Scribus <=1.3.2 Configure the scrapbook BookMView Bookmarks 书签 Move Bookmark 移动书签 Insert Bookmark 插入书签 Cancel 取消 BookPalette Bookmarks 书签 ButtonIcon Icon Placement 图标位置 Layout: 版面: Caption only 仅标题 Icon only 仅图标 Caption below Icon 图标在标题上面 Caption above Icon 标题在图标上面 Caption right to Icon 标题在图标右边 Caption left to Icon 标题在图标左边 Caption overlays Icon 标题覆盖图标 Scale: 缩放: Always 总是 When Icon is too big 当图标太大 Never 从不 Scale How: 如何缩放: Proportional 按比例 Non Proportional 不按比例 Icon 图标 OK 确定 Cancel 取消 Reset 重置 When Icon is too small 当图标太大 CMSPrefs System Profiles 系统配置文件 Rendering Intents 渲染意图 Monitor profiles can only be changed when no documents are currently opened. Perceptual 感官 Relative Colorimetric 相对比色 Saturation 饱和度 Absolute Colorimetric 绝对比色 Default color profile for solid colors on the page 默认页面单色的颜色配置文件 Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your monitor. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. 在屏幕上显示可能不能正确打印的颜色的方法。 这需要非常精确的配置文件而且仅用于警示之用。 &Activate Color Management &A 激活色彩管理 &Solid Colors: &S 单色: &Monitor: &M 监视器: P&rinter: &R 打印机 M&onitor: &O 监视器 Pr&inter: &I 打印机 Sim&ulate Printer on the Screen &U 在监视器上模拟打印机 Mark Colors out of &Gamut &G 标出超出范围的颜色 Use &Blackpoint Compensation &B 使用黑点补偿 &RGB Pictures: &RGB 图像: &CMYK Pictures: &CMYK 图像: Default color profile for imported CMYK images 导入的CMYK图像的默认颜色配置文件 Default color profile for imported RGB images 导入的RGB图像的默认颜色配置文件 Images: 图像: CMSPrefsBase Form 表格 &Activate Color Management &A 激活色彩管理 System Profiles 系统配置文件 &RGB Images: Default color profile for imported RGB images 导入的RGB图像的默认颜色配置文件 &CMYK Images: Default color profile for imported CMYK images 导入的CMYK图像的默认颜色配置文件 &RGB Solid Colors: Default color profile for solid RGB colors on the page &CMYK Solid Colors: Default color profile for solid CMYK colors on the page Document Options Simulate printer on Screen Monitor Profile &Monitor: &M 监视器: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). P&rinter: &R 打印机 Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Rendering Intents 渲染意图 Images: 图像: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Sim&ulate Printer on the Screen &U 在监视器上模拟打印机 Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. 在屏幕上显示可能不能正确打印的颜色的方法。 这需要非常精确的配置文件而且仅用于警示之用。 Mark Colors out of &Gamut &G 标出超出范围的颜色 Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Document Rendering Intents Use &Blackpoint Compensation &B 使用黑点补偿 CMYKChoose Edit Color 编辑颜色 CMYK CMYK RGB RGB Web Safe RGB 网页安全 RGB New Old Scribus Swatches User Swatches C: C: M: M: Y: Y: K: K: Dynamic Color Bars 动态颜色条 Static Color Bars 静态颜色条 R: R: G: G: B: B: % % HSV-Colormap HSV-颜色表 &Name: &N 名称: Color &Model &M 颜色类型: None Is Spot Color 是专色 Is Registration Color 是记录颜色 You cannot create a color named "%1". It is a reserved name for transparent color 你不能生成一个叫 "%1"的颜色。 这个是给透明色预留的名字 Name of the color is not unique 颜色名称不唯一 The name of the color already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CStyleP Colors 颜色 CWDialog Normal Vision Normal Vision Protanopia (Red) Protanopia (Red) Deuteranopia (Green) Deuteranopia (Green) Tritanopia (Blue) Tritanopia (Blue) Full Color Blindness Full Colour Blindness Merging colors Merging colours Error: 错误: Color %1 exists already! Colour %1 exists already! Color %1 appended. 颜色 %1 被追加。 Now opening the color manager. Now opening the colour manager. Color Merging Colour Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Color Wheel 颜色转盘 Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Color Scheme Method Angle: 角度: Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Merge created colors into the document colors Merge created colours into the document colours &Merge Alt+M Alt+M Replace created colors in the document colors Replace created colours in the document colours &Replace Alt+R Alt+R Leave colors untouched Leave colours untouched &Cancel &C 取消 Alt+C Alt+C Preview: Sample color scheme. Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Vision Defect Type: C: C: % % M: M: Y: Y: K: K: RGB: HSV: R: R: G: G: B: B: CMYK: H: H: S: S: V: V: Document 文档 CWDialogBase Color Wheel 颜色转盘 CMYK CMYK C: C: M: M: Y: Y: K: K: RGB RGB R: R: G: G: B: B: Document 文档 Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Angle: 角度: Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Merge created colors into the document colors Merge created colours into the document colours &Replace &R 替代 Replace created colors in the document colors Replace created colours in the document colours &Cancel &C 取消 Alt+C Alt+C Leave colors untouched Leave colours untouched Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. % % HSV HSV H: H: S: S: V: V: Canvas X: %1 Y: %2 X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 长度: %1 角度: %2 Width: %1 Height: %2 宽度: %1 高度: %2 Angle: %1 角度: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. 所选的颜色在文档的颜色组合中不存在。请为这个新颜色输入一个名称。 Color Not Found 颜色未找到 The name you have selected already exists. Please enter a different name for this new color. 你为新颜色选择的名称已经存在。请输入一个另外的名称。 CanvasMode_Normal All Supported Formats 所有支持的格式 Open 打开 CgmPlug Importing: %1 正在导入: %1 Analyzing File: 分析文件: Group%1 组%1 Generating Items 生成条目 ChTable You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one 如果你长按鼠标右键,你能看到一个微缩图。插入键插入一个符号到选择的下面,删除键删除最后插入的符号。 CharSelect Select Character: 选择字符: Font: 字体: Character Class: 字符类: &Insert &I 插入 C&lear &L 清除 &Close &C 关闭 Insert the characters at the cursor in the text 在文本的光标处插入字符 Delete the current selection(s). 删除当前选择 Close this dialog and return to text editing. 关闭对话窗并返回到文本编辑。 Full Character Set 完全字符集 Basic Latin 基本拉丁 Latin-1 Supplement 拉丁-1 附录 Latin Extended-A 拉丁扩展-A Latin Extended-B 拉丁扩展-B General Punctuation 常规标点符号 Super- and Subscripts 上标和下标 Currency Symbols 货币符号 Letterlike Symbols 类似字母符号 Number Forms 数字形式 Arrows 箭头 Mathematical Operators 数学运算符 Box Drawing 方盒绘图 Block Elements 区块元素 Geometric Shapes 几何图形 Miscellaneous Symbols 各种符号 Dingbats 装饰符 Small Form Variants 小形状变体 Ligatures 连字 Specials 特别符号 Greek 希腊字符 Greek Extended 扩展希腊字符 Cyrillic 斯拉夫字符 Cyrillic Supplement 斯拉夫字符附录 Arabic 阿拉伯字符 Arabic Extended A 阿拉伯字符扩展 A Arabic Extended B 阿拉伯字符扩展 B Hebrew 希伯来字符 You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one 如果你长按鼠标右键,你能看到一个微缩图。插入键插入一个符号到选择的下面,删除键删除最后插入的符号。 Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Error 错误 Error reading file %1 - file is corrupted propably. Cannot write file %1 无法写入文件 %1 Character Palette &Search &S 查找 Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette CharSelectEnhanced Full Character Set 完全字符集 Basic Latin 基本拉丁 Latin-1 Supplement 拉丁-1 附录 Latin Extended-A 拉丁扩展-A Latin Extended-B 拉丁扩展-B General Punctuation 常规标点符号 Super- and Subscripts 上标和下标 Currency Symbols 货币符号 Letterlike Symbols 类似字母符号 Number Forms 数字形式 Arrows 箭头 Mathematical Operators 数学运算符 Box Drawing 方盒绘图 Block Elements 区块元素 Geometric Shapes 几何图形 Miscellaneous Symbols 各种符号 Dingbats 装饰符 Small Form Variants 小形状变体 Ligatures 连字 Specials 特别符号 Greek Greek Extended 扩展希腊字符 Cyrillic 斯拉夫字符 Cyrillic Supplement 斯拉夫字符附录 Arabic 阿拉伯字符 Arabic Extended A 阿拉伯字符扩展 A Arabic Extended B 阿拉伯字符扩展 B Hebrew 希伯来字符 Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text 在文本的光标处插入字符 &Insert &I 插入 Delete the current selection(s). 删除当前选择 C&lear &L 清除 Type in a four digit Unicode value directly here CharStyleComboBox No Style 没有样式 CharTable Delete 删除 CharTableView Delete 删除 CheckDocument Glyphs missing 符号丢失 Text overflow 文本溢出 Object is not on a Page 对象不在页面上 Missing Image 图像丢失 Image has a DPI-Value less than %1 DPI 图像的DPI-值低于 %1 DPI Object has transparency 对象有透明 Object is a PDF Annotation or Field 对象是一个PDF注释或域 Object is a placed PDF 对象是个嵌入的PDF Document 文档 No Problems found 没发现问题 Page Free Objects 自由对象 Problems found 发现问题 Preflight Verifier 印前检验器 Items 项目 Problems 问题 Current Profile: 当前配置文件: &Ignore Errors &I 忽略错误 Check again Image is GIF OK Transparency used 所用的过渡色 Blendmode used Layer "%1" Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame Layers 图层 Print/Visible Mismatch Issue(s): %1 Master Pages 母页 Layer 图层 Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI ChooseStyles Choose Styles 选择样式 Available Styles 可用样式 CollectForOutput Choose a Directory 选择一个目录 Cannot create directory: %1 Collecting... 收集中... Warning 警告 Cannot collect all files for output for file: %1 不能收集所有文件来输出文件: %1 Cannot collect the file: %1 不能收集文件: %1 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... 收集中... Cannot collect all files for output for file: %1 不能收集所有文件来输出文件: %1 Cannot collect the file: %1 不能收集文件: %1 ColorListBox Sort by Name 分类——命名 Sort by Color Sort by Type 分类——类型 ColorManager Colors 颜色 &Import &I 导入 &New &N 新建 &Edit &E 编辑 &Delete &D 删除 &Remove Unused &R 清除未用的 Color Sets 颜色组合 Current Color Set: 当前颜色组合 &Save Color Set &S 保存颜色组合 Choose a color set to load 选择要载入的颜色组合 Save the current color set 保存当前颜色组合 Remove unused colors from current document's color set 从当前文档颜色组合清除未用颜色 Import colors to the current set from an existing document 从现存文档中导入颜色组合到当前组合 &Name: &N 名称: Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) Copy of %1 Copy %1 New Color 新颜色 Information 信息 ColorWheel Monochromatic 单色的 Analogous 相似的 Complementary 补充的 Split Complementary 拆分补充的 Triadic 三合一的 Tetradic (Double Complementary) 四分的(双补充的) Base Color 基本颜色 Monochromatic Light 单色亮 Monochromatic Dark 单色暗 1st. Analogous 第一个相似的 2nd. Analogous 第二个相似的 1st. Split 第一个拆分 2nd. Split 第二个拆分 3rd. Split 第三个拆分 4th. Split 第四个拆分 1st. Triadic 1st. Triadic 2nd. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) 3rd. Tetradic (angle opposite) ColorWheelDialog Color Wheel 颜色转盘 Color 颜色 Name 名称 C C M M Y Y K K Select Method: 选择方式: Angle (0 - 90 degrees): 角度 (0 - 90 度): &Merge Colors &M 混合颜色 &Replace Colors &R 替代颜色 Merge created colors into the document colors Merge created colours into the document colours Replace created colors in the document colors Replace created colours in the document colours Leave colors untouched Leave colours untouched Merging colors Merging colours Error: Error: Now opening the color manager. Now opening the colour manager. Color Merging Colour Merging Normal Vision Normal Vision Full Color Blindness Full Colour Blindness Vision Defect: Vision Defect: Cr&eate color... Cr&eate colour... &Import existing color... &Import existing colour... &Merge colors &Merge colours &Replace colors &Replace colours E&xit E&xit C&olor C&olour New Color New Colour Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Click the wheel to get the base color. It is hue in HSV mode. Click the wheel to get the base colour. It is hue in HSV mode. Sample color scheme Sample colour scheme Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Colors of your chosen color scheme 你所选颜色组合的颜色 Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Color %1 exists already! Colour %1 exists already! Color %1 appended. 颜色 %1 被追加。 C&olor Components... C&olour Components... Protanopia (Red) Protanopia (Red) Deuteranopia (Green) Deuteranopia (Green) Tritanopia (Blue) Tritanopia (Blue) ColorWheelPlugin &Color Wheel... &C 颜色转盘... Color setting helper Colour setting helper Color selector with color theory included. Colour selector with colour theory included. CommonStrings &Apply &A 应用 &Cancel &C 取消 None &OK &O 确认 &Save &S 保存 Warning 警告 None color name Custom CommonStrings, custom page size 自定义 Single Page 单页 Double Sided 3-Fold 3折 4-Fold 4折 Left Page 左页 Middle 中间 Middle Left 中左 Middle Right 中右 Right Page 右页 Monday Tuesday Wednesday Thursday Friday Saturday Sunday January February March April May June July August September October November December Yes No &Yes &Y 是 &No &N 否 PDF 3D Annotation Symbol Left Page Left page location 左页 Middle Middle page location 中间 Middle Left Middle Left page location 中左 Middle Right Middle Right page location 中右 Right Page Right page location 右页 Normal Default single master page 标准 Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Normal Vision Protanopia (Red) Color Blindness - Red Color Blind Protanopia (Red) Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranopia (Green) Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanopia (Blue) Full Color Blindness Color Blindness - Full Color Blindness Full Colour Blindness Custom: Custom Tab Fill Option 自定义: Solid Line 实线 Dashed Line 虚线 Dotted Line 点线 Dash Dot Line 虚点线 Dash Dot Dot Line 虚点点线 None Optical Margin Setting Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace 灰度 Duotone Colorspace Unknown Colorspace (Unknown) 未知 PostScript PostScript Text Frame 文本框 Image Frame Line 线条 Polygon 多边形 Polyline Text on a Path Multiple Multiple frame types PDF Push Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation PostScript Level 1 PostScript 级别 1 PostScript Level 2 PostScript 级别 2 PostScript Level 3 PostScript 级别 3 Windows GDI Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings 预览设置 Paste File... Delete Page Paste Image from Clipboard CopyPageToMasterPageBase Convert Page to Master Page 把页转换为母页 Name: 名称: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 新建母页 %1 Cpalette Normal 普通 Horizontal Gradient Horizontal Gradient Vertical Gradient Vertical Gradient Diagonal Gradient Diagonal Gradient Cross Diagonal Gradient Cross Diagonal Gradient Radial Gradient Radial Gradient Opacity: Opacity: % % None None Shade: Shade: Edit Line Color Properties Edit Line Colour Properties Edit Fill Color Properties Edit Fill Colour Properties Saturation of color Saturation of colour Normal or gradient fill method Normal or gradient fill method Set the transparency for the color selected Set the transparency for the colour selected Free linear Gradient Free linear Gradient Free radial Gradient Free radial Gradient X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: Move Vector Move Vector Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Blend Mode: 混合模式: Darken 更暗 Lighten 更亮 Multiply 倍增 Screen 屏幕 Overlay 重叠 Hard Light 强光 Soft Light 柔光 Difference 差分 Exlusion 排除 Color Dodge 颜色模糊 Color Burn 颜色焦灼 Hue 色调 Saturation 饱和度 Color 颜色 Luminosity 亮度 Y: Y: Exclusion 排除 Custom 自定义 Create Mesh CreateRange Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Range of Pages De&lete 删除(&) Alt+L Alt+L Move &Down Alt+D Alt+D Move &Up Alt+U Alt+U Add a Range of Pages Consecutive Pages Even Pages From: To: 到: &Add To Range Alt+A Alt+A Odd Pages Comma Separated List Advanced Reordering Page Order Sample Page Order: Page Group Size: &OK 确认(&O) Alt+O Alt+O &Cancel &C 取消 Alt+C Alt+C CreateRangeBase To: 到: Alt+U Alt+U De&lete &L 删除 &OK &O 确认 Alt+O Alt+O &Cancel &C 取消 Alt+C Alt+C CsvDialog CSV Importer Options CSV Importer Options Field delimiter: Field delimiter: (TAB) (TAB) Value delimiter: Value delimiter: First row is a header First row is a header OK OK Cancel Cancel None None None delimiter CupsOptions Printer Options 打印机选项 Option 选项 Value 数值 Page Set 页面套 All Pages 全部页面 Even Pages only 偶数页 Odd Pages only 奇数页 Mirror 镜像 No Yes Orientation 页面方向 Portrait 竖式 Landscape 横式 N-Up Printing N-Up 打印 Page per Sheet Page per Sheet Pages per Sheet Pages per Sheet This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Save as Cannot write the file: %1 不能写入文件: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog Encoding: 编码: Moves to your Document Directory. This can be set in the Preferences. 移动到你的文档目录。这个可以在首选项里设定。 &Compress File &C 压缩文件 &Include Fonts &I 包括字体 Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CvgPlug Importing: %1 Analyzing File: Group%1 Generating Items CwSetColor Set Color Components 设置颜色组成 CMYK CMYK RGB RGB HSV HSV H: H: S: S: V: V: R: R: G: G: B: B: C: C: M: M: Y: Y: K: K: Set &RGB Set &RGB Set C&MYK Set C&MYK Set &HSV Set &HSV DashEditor Value: 数值: Offset: 偏移: DeferredTask Cancelled by user 被用户取消 DelColor Delete Color 删除颜色 None Delete Color: 删除颜色: Replace With: 替换上: DelPages Delete Pages 删除页 to: 到: Delete From: 删除来自: DelStyle Delete Style 删除样式 Delete Style: 删除样式: Replace With: 替换上: No Style 没有样式 DialogsAPI Alert - Scribus 警告 - Scribus DocIm Importing failed 导入失败 Importing Word document failed %1 DocInfos Document Information 文档信息 &Title: &T 标题: &Author: &A 作者: &Subject: &Keywords: &K 关键词: Descri&ption: &P 描述: P&ublisher: &U 出版人: &Contributors: &C 贡献者: Dat&e: &E 日期: T&ype: &Y 类型: F&ormat: &O 格式: Identi&fier: &F 身份标记 &Source: &S 来源: &Language: &L 语言: &Relation: &R 关系: Co&verage: &V 范围: Ri&ghts: &G 权利: Further &Information &I 进一步信息 A person or organisation responsible for making the document available 负责制作该文档的一个人或组织 A person or organisation responsible for making contributions to the content of the document 负责为该文档内容作出贡献的一个人或组织 A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 一个和文档存在时的某事件相关联的日期,以ISO 8601标准表示,格式是年-月-日 The nature or genre of the content of the document, eg. categories, functions, genres, etc 文档内容的性质或流派,例如类别,功能或流派等等 An unambiguous reference to the document within a given context such as ISBN or URI 一个在特定的上下文里对文档的清晰参考,例如ISBN或URI A reference to a document from which the present document is derived, eg. ISBN or URI 一个关于当前文档怎么起源的参考,例如ISBN或URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI 一个关于相关文档的参考,兴许使用一个正式的身份标记,例如ISBN或者URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges 文档内容的区域或者范围,可能的话包括地点,时间和管辖范围 Information about rights held in and over the document, eg. copyright, patent or trademark 关于在文档里或对文档拥有的权力,例如版权,专利或者商标 Documen&t &T 文档 The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 制作此文档内容的主要人或组织。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。 A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 赋予文档的名称。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。 An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export 文档内容的说明。这个项目是文档的简单描述或者摘要。这个在输出PDF文档时将被嵌入 The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files 文档内容的主题。这个项目是你想嵌入到PDF文档中的关键词,以便帮助查找和检索PDF文档 The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here 文档的物理或数码的证明。媒体类型或者尺寸将值得关注。RFC2045,RFC2046在此也有用 The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH 书写文档内容所用的语言,一般上是可能带横杠后缀和一个ISO-3166国家代码(如en-GB,fr-CH)的ISO-639语言编码 DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. 添加一个页码区域到文档。这个新区域将被添加到当前选中的区域后面 Delete the currently selected section. 删除当前选中的区域 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Name: Optional name for section eg. Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. 名称:区域的可选名称,例如:Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections 文档区域 &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D Name 名称 Shown 显示 From 来自 To Style 样式 Start 开始 DocSectionsBase Document Sections 文档区域 Name 名称 From 来自 To To Style 样式 Start 开始 &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D Shown 显示 DocumentItemAttributes None Relates To 相关于 Is Parent Of 父级于 Is Child Of 子级于 Text Frames 文本框 Image Frames 图片框 Boolean 布尔型 Integer 整数 String 字串 Real Number None relationship None auto add None types Document Item Attributes 文档项目属性 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To Auto Add To 自动添加到 DocumentItemAttributesBase Document Item Attributes 文档项目属性 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To 有关系于 Auto Add To 自动添加到 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L DrwPlug Group%1 Importing: %1 Analyzing File: Generating Items EPSPlug Importing File: %1 failed! 导入文件: %1 失败! Fatal Error 致命错误 Error 错误 Analyzing PostScript: Generating Items 生成物品 Converting of %1 images failed! Group%1 组%1 Importing: %1 导入: %1 EditStyle Edit Style 编辑样式 Character 字符 pt pt None Line Spacing 行距 Name of your paragraph style Name of your paragraph style Font of selected text or object 所选文本或对象的字体 Font Size 字体大小 Color of text fill 文本填充颜色 Color of text stroke 文本轮廓颜色 Determines the overall height, in line numbers, of the Drop Caps Determines the overall height, in line numbers, of the Drop Caps Spacing above the paragraph 段落上方的距离 Spacing below the paragraph 段落下方的距离 Tabulators and Indentation 制表符和缩进 &Name: &N 名称: &Lines: &L 行: % % Distances 距离 Fixed Linespacing 固定行距 Automatic Linespacing 自动行距 Align to Baseline Grid 和基线网格对齐 Drop Caps 首字下沉 Distance from Text: 到文本距离: Preview of the Paragraph Style 预览段落样式 Determines the gap between the DropCaps and the Text 确定下沉字和文本的间隔 Toggles sample text of this paragraph style 切换这个段落样式的文本范例 Name of the style is not unique 这个样式的名称非唯一 Background 背景 Auto 自动 EditToolBar Edit 编辑 Editor Editor 编辑器 &New &N 新建 &Open... &O 打开... Save &As... &A 另存为... &Save and Exit &S 保存并退出 &Exit without Saving &E 不保存退出 &Undo &U 撤销动作 &Redo &R 重复动作 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 C&lear &L 清除 &Get Field Names &G 获取域名称 &File &F 文件 &Edit &E 编辑 JavaScripts (*.js);;All Files (*) JavaScripts (*.js);;全部文件 (*) Ctrl+N Ctrl+N Ctrl+Z Ctrl+Z Ctrl+X Ctrl+X Ctrl+C Ctrl+C Ctrl-V Ctrl-V EffectsDialog Image Effects 图像效果 Options: 选项: Color: 颜色: Shade: 阴影: Brightness: 亮度: Contrast: 对比: Radius: 半径: Value: 数值: Posterize: 海报效果化: Available Effects 可用效果 Blur 模糊 Brightness 亮度 Colorize 颜色化 Contrast 对比 Grayscale 灰度 Invert 反转 Posterize 海报效果化 Sharpen 锐化 >> >> << << Effects in use 使用中效果 OK 确认 Cancel 取消 Color 1: 色彩 1 Color 2: 色彩 2 Color 3: 色彩 3 Color 4: 色彩 4 Duotone Tritone Quadtone Curves 曲线 ExceptHookDialog Script error 脚本错误 An exception occured while running the script. &Close &C 关闭 Exception 例外 &Details >> &D 细节 >> ExportBitmap File exists. Overwrite? 文件存在。覆盖吗? exists already. Overwrite? 已经存在。覆盖吗? All 全部 Save as Image 另存为图像 Insufficient memory for this image size. Error writing the output file(s). 写入输出文件错误。 ExportForm &All pages &A 全部页 Change the output directory 更改输出目录 The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' 输出目录-保存你的图像的地方。输出文件的名称将会是 '文件名-页码.文件类型' Export only the current page 仅导出当前页 Available export formats 可用导出格式 Choose a Export Directory 选择一个导出目录 C&hange... &H 更改... &Export to Directory: &E 导出到目录: Image &Type: &T 图像类型: &Quality: &Q 质量: Export as Image(s) 作为图像导出 Options 选项 &Resolution: &R 分辨率: % % dpi dpi Range 范围 &Current page &C 当前页 &Range &R 范围 C C Export a range of pages 导出一个页面范围 Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一个以逗号隔开的记号,这里记号可以是*以代表所有页,1-5代表页范围或者一个单独的页码。 Export all pages 输出所有页 Resolution of the Images Use 72 dpi for Images intended for the Screen 图像的分辨率。 如果图像用于屏幕显示,用72 dpi The quality of your images - 100% is the best, 1% the lowest quality 图像的质量-100%为最好,1%为最低质量 &Size: &S 尺寸 Size of the images. 100% for no changes, 200% for two times larger etc. 图像尺寸。100%为没有更改,200%是两倍大,以此类推 Image size in Pixels TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic 自动 ExtImageProps Extended Image Properties 图像扩展属性 Normal 常规 Darken 更暗 Lighten 更亮 Hue 色调 Saturation 饱和度 Color 颜色 Luminosity 亮度 Multiply 倍增 Screen 屏幕 Dissolve 溶解 Overlay 重叠 Hard Light 强光 Soft Light 柔光 Difference 差分 Exlusion 排除 Color Dodge 颜色模糊 Color Burn 颜色焦灼 Blend Mode: 混合模式: Opacity: 透明度: % % Name 名称 Background 背景 Layers 图层 Don't use any Path 不用任何路径 Paths 路径 Exclusion 排除 Live Preview 即时预览 FDialogPreview Size: 尺寸 Title: 标题: No Title 无标题 Author: 作者 Unknown 未知 Scribus Document Scribus文档 Resolution: 分辨率 DPI DPI RGB RGB CMYK CMYK Grayscale 灰度 Colorspace: 颜色模式: File Format: 文件格式: FileLoader Some fonts used by this document have been substituted: 这个文件使用的一些字体被替代为: was replaced by: 已被替代成: FileToolBar File 文件 FontComboH Family: 类别: Style: 样式: Font Family of Selected Text or Text Frame 选中文字和文字框的字体类别 Font Style of Selected Text or Text Frame 选中文字和文字框的字体样式 FontListModel Font Name 字体名称 Use Font 使用字体 Family 类别 Style 样式 Variant 变化 Type 类型 Format 格式 Embed in PostScript 镶入PostScript Subset 作为子集 Access 进入 Used in Doc 用于文档 Path to Font File 路径转化为字体文件 Unknown font type 未知类型 Unknown font format 未知格式 User font preview 用户 System font preview 系统 Click to change the value 点击改变参数 FontPrefs Available Fonts 可用字体 Font Substitutions 字体替代 Additional Paths 其他路径 Font Name 字体名称 Replacement 替代 Choose a Directory 选择一个目录 &Available Fonts &A 可用字体 Font &Substitutions &S 字体替代 Additional &Paths &P 其他路径 &Delete &D 删除 C&hange... &H 更改... A&dd... &D 添加... &Remove &R 移除 Font Name font preview 字体名称 Use Font font preview 使用字体 Embed in: font preview 嵌入在: Subset font preview 子集 Path to Font File font preview 字体文件的路径 PostScript PostScript Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. 字体搜索路径只能在首选项中设定,而且要在没有打开任何文档的情况下。关闭所有文档,然后用编辑-设置来更改字体搜索路径。 Use Font 使用字体 Subset 子集 Path to Font File 字体文件的路径 FontPrefsTab Available Fonts 可用字体 Font Substitutions 字体替代 Additional Paths 其他路径 &Available Fonts &A 可用字体 Font Name 字体名称 Replacement 替代 &Delete &D 删除 Font &Substitutions &S 字体替代 C&hange... &H 更改... A&dd... &D 添加... &Remove &R 移除 Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Additional &Paths &P 其他路径 Choose a Directory 选择一个目录 FontPreview Font Name font preview 字体名称 Doc font preview 文件 Type font preview 类型 Subset font preview 子集 Access font preview Access Font Size: 字体尺寸: Fonts Preview font preview 字体预览 Alt+O font preview Alt+O Quick Search: 快速查找: &Search &S 查找 &Close font preview &C 关闭 Alt+C font preview Alt+C Append selected font into Style, Font menu font preview 追加选中的字体到样式,字体菜单 Leave preview font preview Leave 预览 Typing the text here provides quick searching in the font names. E.g. 'bold' shows all fonts with Bold in name. Searching is case insensitive. 在此输入字以便快速查找字体名称。例如'粗体'显示所带有粗体的名称。查找大小写有别 Start searching 开始查找 Size of the selected font 所选字体的尺寸 Woven silk pyjamas exchanged for blue quartz font preview Woven silk pyjamas exchanged for blue quartz User font preview 用户 System font preview 系统 &Append &A 追加 Font Name 字体名称 Doc 文件 Type 类型 Subset 子集 Access Access Fonts Preview 字体预览 &Quick Search: &Font Size: &F 字体大小: Text 文本 Sample text to display 显示示例文字 Se&t Alt+T Alt+T Reset the text Alt+A Alt+A &Close &C 关闭 Alt+C Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default &D 默认 Show Extended Font Information Set the preview text FontPreviewBase Fonts Preview 字体预览 &Search &S 查找 Font Name 字体名称 Doc 文件 Type 类型 Subset 子集 Access Access Text 文本 &Append &A 追加 &Close &C 关闭 Alt+C Alt+C FontPreviewPlugin &Font Preview... &F 字体预览... Font Preview dialog 字体预览窗口 Sorting, searching and browsing available fonts. 排列,查找和浏览可用的字体。 FontReplaceDialog Font Substitution 字体替代 Original Font 原始字体 Substitution Font 替代字体 Make these substitutions permanent 让这些替代永久有效 This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. 这个文档包括一些你的系统没有安装的字体,请为它们选择合适的替代字体。按取消将停止载入文档。 Cancels these font substitutions and stops loading the document. 取消这些字体替代并停止载入文档。 Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. 启用这个就告诉Scribus永久性地在以后的版面使用替代字体来代替不存在的字体。这个可以在编辑-首选项-字体中被改变或逆转。 If you select OK, then save, these substitutions are made permanent in the document. 如果你选择确认然后保存,这些替代将永久保留到文档中。 FontSelect Select Alternate Font 选用替换字体 Font 字体 GradientEditor Position: 位置: % % Here you can add, change or remove Color-Stops. 这里你可以增加,更改或者删除颜色节点 Add, change or remove color stops here GradientEditorBase Frame Position: 位置: % Color: 颜色: Opacity: Shade: GradientPreview Add Stop 添加节点 Remove Stop 移除节点 GradientVectorBase Gradient Vector 渐变矢量 Start: 开始: / End: 结束: Skew: Focal: Scale: 缩放: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape GradientVectorDialog Gradient Vector 渐变矢量 GuideManager Manage Guides 管理参考线 Horizontal Guides 水平参考线 Vertical Guides 垂直参考线 &Y-Pos: &Y-坐标: &Add &A 添加 D&elete &E 删除 &X-Pos: &X-坐标: A&dd &D 添加 De&lete &L 删除 &Lock Guides &L 锁定参考线 &Rows: &R 行: C&olumns: &O 列: Refer to: 参考: &Page &P 页 &Margins &M 页边距 &Selection &S 选择 &Close &C 关闭 Rows and Columns - Automatic Guides 行和列-自动参考线 Row &Gap &G 行距 Colum&n Gap &N 列距 &Update &U 更新 Set the guides in document. Guide manager is still opened but the changes are persistant guide manager 在文档设置参考线。参考线管理器还是打开状态,但是更改是延续的 &Apply to All Pages &A 应用到所有页面 Guide 参考线 Preview 预览 There is empty (0.0) guide already 已经有空白的(0.0)参考线 &Single &S 单 Horizontals 水平 Alt+A Alt+A Alt+E Alt+E Verticals 垂直 Alt+D Alt+D Alt+L Alt+L Appl&y to All Pages Alt+Y &Column/Row &Number: U&se Gap: Alt+S Alt+S Alt+P Alt+P M&argins &A 边距 S&election &E 选择 Nu&mber: &M 数字: Use &Gap: Alt+G Alt+G &Misc &M 其他 Delete all guides from the current page Delete Guides from Current &Page Delete all guides from the current document Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages 应用到全部页面 Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages Refer to GuideManagerBase Manage Guides 管理参考线 Guide 参考线 &Add &A 添加 D&elete &E 删除 A&dd &D 添加 De&lete &L 删除 &Lock Guides &L 锁定参考线 HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. 对不起,没有使用手册可用!请访问: http://docs.scribus.net 来获得最新文档,如果要下载,请访问 www.scribus.net 。 Contents 内容 Link 链接 Scribus Online Help Scribus在线帮助 &Contents &C 内容 &Search &S 查找 unknown 未知 Find 查找 Search Term: 查找条件: Se&arch &A 查找 &New &N 新建 &Delete &D 删除 De&lete All &L 全部删除 Book&marks &M 书签 &Print... &P 打印... E&xit &X 退出 Searching is case unsensitive 查找大小写有别 New Bookmark 新书签 New Bookmark's Title: 新书签标题: &File &F 文件 &Find... &F 查找... Find &Next &N 查找下一个 Find &Previous &P 查找上一个 &Edit &E 编辑 Navigation 导航 Loading Failed 读取失败 &Add Bookmark &A 添加书签 D&elete All &E 全部删除 &Bookmarks &B 书签 Scribus Help Scribus 帮助 &Exit &E 退出 Find &Next... &N 找下一个 Find &Previous... &P 找前一个 &Add &A 添加 &Quit &Q 退出 <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowser2 &Contents &C 内容 Se&arch &A 查找 &Search &S 查找 Book&marks &M 书签 HelpBrowserNavigation Form 表格 &Contents &C 内容 Se&arch &A 查找 Searching is case insensitive &Search &S 查找 1 Book&marks &M 书签 &New &N 新建 &Delete &D 删除 D&elete All &E 全部删除 HyAsk Possible Hyphenation 可能连字符 Accept 接受 Skip 跳过 Cancel 取消 Add to the Exception List Add to the Ignore List HySettings Length of the smallest word to be hyphenated. 需要用连字符的最小的词的长度。 Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. &Language: &L 语言: &Smallest Word: &S 最小字: &Hyphenation Suggestions &H 连字符提示 Hyphenate Text Automatically &During Typing &D 输入时自动添加连字符到文本 A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Enables automatic hyphenation of your text while typing. 启用在输入时自动用连字符 Consecutive Hyphenations &Allowed: &A 允许连续连字符: Ignore List Add a new Entry Edit Entry Exception List ImageInfoDialog Image Info 图片信息 General Info 常规信息 Date / Time: 日期/时间: Has Embedded Profile: 已经嵌入配置文件: Yes No Profile Name: 配置文件名称: Has Embedded Paths: 已经嵌入路径: Has Layers: 有图层: EXIF Info EXIF信息 Artist: 作者: Comment: 说明: User Comment: 用户说明: Camera Model: 相机型号: Camera Manufacturer: 相机厂家: Description: 描述: Copyright: 版权: Scanner Model: 扫描仪型号: Scanner Manufacturer: 扫描仪厂家 Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportDialog Choose Styles 选择样式 Available Styles 可用样式 ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats ImportPSPlugin Import &EPS/PS... &E 导入EPS/PS... Imports EPS Files 导入EPS文件 Imports most EPS files into the current document, converting their vector data into Scribus objects. 导入大部分EPS文件到当前文档, 把它们的矢量数据转换为Scribus对象 PostScript PostScript Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats 所有支持的格式 Imposition Portrait 竖式 Landscape 横式 ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Alt+U Front side Back side &Booklet Pages per sheet 4 8 16 Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Back page from Destination page Size 尺寸 Orientation 页面方向 Width 宽度 Height 高度 Preview 预览 Refresh preview &OK &O 确认 Alt+G Alt+G &Cancel &C 取消 Alt+C Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InsPage Insert Page 插入页面 before Page 页之前 after Page 页之后 at End 最后 Normal 普通 Page(s) 页面 &Insert &I 插入 &Master Page: &M 母页: Page Size 页面尺寸 &Size: &S 尺寸: Custom 自定义 Orie&ntation: &N 文档方向: Portrait 竖式 Landscape 横式 &Width: &W 宽度: &Height: &H 高度: Move Objects with their Page 对象和它们的页一起移动 Master Pages 母页 InsertAFrame Open Insert A Frame T&ype &Text Frame &T 文本框 &Image Frame &I 图像框 T&able &A 表格 Alt+A Alt+A Polygon 多边形 &Location Page Placement Current Page All Pages 全部页面 ... Position of Frame Top Left of Margins Top Left of Page Top Left of Bleed X: X: Y: Y: &Size &S 尺寸 Same as the Page Margins Same as the Page Same as the Bleed Same as the Imported Image Height: 高度: Width: 宽度: &Options Source Image: There are no options for this type of frame Columns: Gap: Source Document: &OK &O 确认 &Cancel &C 取消 Range of Pages Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertAFrameBase &Text Frame &T 文本框 &Image Frame &I 图像框 T&able &A 表格 Polygon 多边形 Y: Y: &Size &S 尺寸 Width: 宽度: &OK &O 确认 &Cancel &C 取消 InsertTable Insert Table 插入表格 Number of rows: 行数: Number of columns: 列数: JavaDocs New Script 新脚本 Edit JavaScripts 编辑JavaScripts &Edit... &E 编辑... &Add... &A 添加... &Delete &D 删除 &Close &C 关闭 &New Script: &N 新脚本: &No &N 否 &Yes &Y 是 Do you really want to delete this script? 你真的要删除这个脚本吗? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. 添加一个新脚本,预设了一个同名称的函数。如果你想把这个脚本作为一个“打开动作”脚本来用,确保没有更改函数的名称 KeyManager Action 动作 Current Key 当前键位 Select a Key for this Action 为这个动作选择一个键位 ALT+SHIFT+T ALT+SHIFT+T Alt Alt Ctrl Ctrl Shift Shift Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ &No Key &N 没键 &User Defined Key &U 用户自定义键 Set &Key &K 设置键 Loadable Shortcut Sets 可载入快捷键组合 &Load &L 载入 &Import... &I 导入... &Export... &E 导出... &Reset &R 重置 Keyboard shortcut sets available to load 可载入快捷键组合 Load the selected shortcut set 载入选中的快捷键组合 Import a shortcut set into the current configuration 导入一个快捷键组合到当前配置中 Export the current shortcuts into an importable file 导出当前快捷键到一个可被导入的文件中 Reload the default Scribus shortcuts 重新载入默认的Scribus快捷键 Key Set XML Files (*.ksxml) 键位组合 XML 文件 (*.ksxml) This key sequence is already in use 这个键位组合已经被使用 Meta Meta Meta+ Meta+ LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options 选项 Resolution: Automatic 自动 DPI Program: Use Preamble Status: Error 错误 Finished Running No item selected! Editor 编辑器 Information 信息 An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Insert Symbol LayerPalette Layers 图层 Delete Layer 删除图层 Name 名称 Do you want to delete all objects on this layer too? 你确信一并删除此图层上的所有对象吗? Add a new layer 添加图层 Delete layer 删除图层 Raise layer 升高图层 Lower layer 降低图层 Opacity: 透明度: % % Blend Mode: 混合模式: Normal 常规 Darken 更暗 Lighten 更亮 Multiply 倍增 Screen 屏幕 Overlay 重叠 Hard Light 强光 Soft Light 柔光 Difference 差分 Exlusion 排除 Color Dodge 颜色模糊 Color Burn 颜色焦灼 Exclusion 排除 Hue 色调 Saturation 饱和度 Color 颜色 Luminosity 亮度 Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG 层过度色只能在 PDF 1.4和 SVG 中应用 Add a New Layer 添加新的层 Duplicate the Current Layer 复制当前层 Raise Layer 提升层 Lower Layer 降低层 Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Name of the Layer - Double click on the name of a layer to edit the name LegacyMode All Files (*) 所有文件 (*) Open All Supported Formats LensDialogBase Optical Lens + + - - Lens Parameters Radius: 半径: Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools 路径工具 Lens Effects Apply fancy lens effects LineFormate Edit Line Styles 编辑线条样式 Copy of %1 Copy of %1 New Style 新样式 Open 打开 Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文件 (*.sla *.sla.gz *.scd *.scd.gz);;所有文件 (*) Documents (*.sla *.scd);;All Files (*) 文件 (*.sla *.scd);;所有文件 (*) &New &N 新建 &Edit &E 编辑 D&uplicate &U 复制 &Delete &D 删除 &Save &S 保存 &No &N 否 &Yes &Y 是 &Import &I 导入 Do you really want to delete this style? 你真的要删除此样式吗? LineStyleW Line Width: 线条宽度: LineStyleWBase Line Width: 线条宽度: LineStyleWidget pt pt Flat Cap 平头 Square Cap 方头 Round Cap 圆头 Bevel Join 斜角连接 Round Join 圆角连接 LoadSavePlugin All Files (*) 所有文件 (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found LoremManager Select Lorem Ipsum 选择范例文本 Author: 作者: Get More: 获得更多: XML File: XML 文件: Lorem Ipsum 范例文本 Paragraphs: 段落: Alt+O Alt+O Alt+C Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MarginDialog Margin Guides 页边距参考线 Manage Page Properties 管理页属性 Page Size 页面尺寸 &Size: &S 尺寸: Custom 自定义 Orie&ntation: &N 页面方向 Portrait 竖式 Landscape 横式 &Width: &W 宽度: &Height: &H 高度: Move Objects with their Page 把对象和页一起移动 Type: 类型: Other Settings Master Page: Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget &Bottom: 底部(&B): &Top: &T 顶部: &Right: &R 右边: &Left: &L 左边: Distance between the top margin guide and the edge of the page 顶部边距线到页边的距离 Distance between the bottom margin guide and the edge of the page 底部边距线到页边的距离 &Inside: &I 里面: O&utside: &U 外面: Preset Layouts: 预设版面: Apply margin settings to all pages 应用页边距设置到所有页面 Apply the margin changes to all existing pages in the document 应用页边距设置到文档中现存的所有页面 Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 左边页边距线到页边的距离。如果对面页被选择,这个距离可以用来获得正确的装订边距。 Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 右边页边距线到页边的距离。如果对面页被选择,这个距离可以用来获得正确的装订边距。 Printer Margins... 打印边距... Import the margins for the selected page size from the available printers. 从可用打印机里导入所选页码的页边距。 Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing master pages in the document Margin Guides 页边距参考线 Top: Bottom: Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page Bleeds Inside: Outside: Left: Right: 右边: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages 编辑母页 Do you really want to delete this master page? 你确认要删除这个母页吗? &No &N 否 &Yes &Y 是 &Name: &N 名称: New Master Page 新建母页 Copy of %1 Copy of %1 Name: 名称: New MasterPage 新建母页 Copy #%1 of Copy #%1 of Normal 普通 Duplicate the selected master page 复制当前选中的母页 Delete the selected master page 删除当前选中的母页 Add a new master page 增加一个新的母页 Import master pages from another document 从另外一个文件导入母页 New Master Page %1 新建母页 %1 Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Copy #%1 of %2 This master page is used at least once in the document. Do you really want to delete master page "%1"? Mdup Multiple Duplicate 多重复制 &Number of Copies: &N 复件数: &Horizontal Shift: &H 水平提升: &Vertical Shift: &V 垂直提升: Measurements Distances 距离 X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: 角度: Length: 长度: pt pt ° MeasurementsBase Distances 距离 X1: X1: 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: 长度: DX: DX: DY: DY: Angle: 角度: Unit: 单位: MergeDoc Open 打开 Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) Import Page(s) 输入页 from 0 来自 0 Create Page(s) 创建页 from %1 来自 %1 Import Master Page 导入母页 &From Document: &F 来自文档: Chan&ge... &G 更改... &Import Page(s): &I 导入页: &Import Master Page 导入母页(&I) Before Page 页之前 After Page 页之后 At End 最后 &Import 导入(&I) Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入野鸽以逗号隔开的标记,这里一个记号可以是*来表示全部也,1-5表示页范围,或者输入单个页码。 &Select... 选择...(&S) MeshDistortionDialog + + - - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset &R 重置 MeshDistortionPlugin Mesh Distortion... Path Tools 路径工具 Mesh Distortion of Polygons MissingFont Missing Font 丢失字体 The Font %1 is not installed. 字体 %1 没有安装。 Use 使用 instead 代以 ModeToolBar Tools 工具 Angle: 角度: Width: 宽度: Properties... 属性... MovePages Move Pages 移动页 Copy Page 复制页 Move Page(s): 移动页: Move Page(s) 移动页 Before Page 页之前 After Page 页之后 At End 最后 To: 到: Number of copies: 复件数量: Number of Copies: 复制数量: MultiLine Edit Style 编辑样式 Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join Line Width: Line Width: pt pt % % OK OK pt pt Solid Line 实线 Dashed Line 虚线 Dotted Line 点线 Dash Dot Line 虚点线 Dash Dot Dot Line 虚点点线 Name "%1" isn't unique.<br/>Please choose another. 名称 "%1" 不唯一。<br/>请选择另外一个 MultiProgressDialog Progress 进度 Overall Progress: 总进度 &Cancel &C 取消 %v of %m MultiProgressDialogBase Progress 进度 Overall Progress: 总进度 &Cancel &C 取消 MultipleDuplicate &Horizontal Shift: &H 水平提升: &Vertical Shift: &V 垂直提升: &Horizontal Gap: &Vertical Gap: Multiple Duplicate 多重复制 &By Number of Copies &Number of Copies: &N 复件数: &Shift Created Items By Alt+S Alt+S Create &Gap Between Items Of Alt+G Alt+G Rotation: 旋转: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Number of Columns: &OK &O 确认 &Cancel &C 取消 MultipleDuplicateBase Multiple Duplicate 多重复制 &Number of Copies: &N 复件数: &Horizontal Shift: &H 水平提升: &Vertical Shift: &V 垂直提升: &OK &O 确认 &Cancel &C 取消 MyPlugin My &Plugin 我的插件(&P) MyPluginImpl Scribus - My Plugin Scribus-我的插件 The plugin worked! 插件工作了! NewDoc New Document 新建文档 Page Size 页面大小 Portrait 竖式 Landscape 横式 Margin Guides 页边距参考线 Options 选项 Document page size, either a standard size or a custom size 文档的页面大小,或是标准尺寸或者是自定义尺寸 Orientation of the document's pages 文档页面的方向 Width of the document's pages, editable if you have chosen a custom page size 文档的页面宽度,如果你选择了一个自定义的页面尺寸,它是可以编辑的 Height of the document's pages, editable if you have chosen a custom page size 文档的页面高度,如果你选择了一个自定义的页面尺寸,它是可以编辑的 First page number of the document 文档的起始页码 Default unit of measurement for document editing 文档编辑默认所使用的尺寸单位 Create text frames automatically when new pages are added 当新页被添加时自动创建文本框 Distance between automatically created columns 自动创建的列的列距 Number of columns to create in automatically created text frames 自动创建的文本框里的列数 &Size: &S 尺寸: Orie&ntation: &N 页面方向: &Width: &W 宽度: &Height: &H 高度: New from Template 从模板新建 Open Existing Document 打开已经存在的文档 Open Recent Document 打开最近的文档 F&irst Page Number: &I 起始页码: &Default Unit: 默认单位(&D): &Automatic Text Frames &A 自动文本框 &Gap: &G 间隔: Colu&mns: 列(&M): Do not show this dialog again 不再显示此对话 Initial number of pages of the document 文档起始页数 N&umber of Pages: 页数(&U): Open 打开 &New Document 新建文档(&N) Open &Existing Document 打开现有文档(&E) Open Recent &Document 打开最近文档(&D) Custom 自定义 Page Layout 页面排版 First Page is: 第一页: Show Document Settings After Creation 创建后显示文档设置 Document Layout 文档设计布局 New &from Template 从模板新建(&F) NewFromTemplatePlugin New &from Template... &F 从模板新建... Load documents with predefined layout 以预设的版面载入文档 Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). 从一个别人或自己创建的模板中开创文档。(例如,如果你的文档有固定的样式) NewMarginWidget Form 表格 Preset Layouts: 预设版面: Left: Right: Top: Bottom: Link 链接 Printer Margins... 打印边距... Distance between the top margin guide and the edge of the page 顶部边距线到页边的距离 Distance between the bottom margin guide and the edge of the page 底部边距线到页边的距离 Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: 里面(&I): &Left: 左(&L): O&utside: 外面(&U): &Right: 右(&R): NodePalette Nodes 节点 Move Nodes 移动节点 Move Control Points 移动控制点 Add Nodes 添加节点 Delete Nodes 删除节点 Reset Control Points 重置控制点 Reset this Control Point 重置这个节点 &Absolute Coordinates &A 绝对坐标 &X-Pos: &X-坐标: &Y-Pos: &Y-坐标: Edit &Contour Line &C 编辑轮廓线 &Reset Contour Line &R 重置轮廓线 &End Editing &E 结束编辑 Move Control Points Independently 独立移动控制点 Move Control Points Symmetrical 对称移动控制点 Open a Polygon or Cuts a Bezier Curve 打开一个多边形或剪切齐贝尔曲线 Close this Bezier Curve 闭合这个齐贝尔曲线 Mirror the Path Horizontally 水平镜像路径 Mirror the Path Vertically 垂直镜像路径 Shear the Path Horizontally to the Left 向左水平切变路径 Shear the Path Vertically Up 向上垂直切变路径 Shear the Path Vertically Down 向下垂直切变路径 Rotate the Path Counter-Clockwise 逆时针旋转路径 Rotate the Path Clockwise 顺时针旋转路径 Reduce the Size of the Path by shown % 按所示减少路径尺寸 % Enlarge the Size of the Path by shown % 按所示增加路径尺寸 % Angle of Rotation 旋转角度 % to Enlarge or Reduce By % 来增加或减少 Activate Contour Line Editing Mode 激活轮廓线条编辑模式 Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By Value to Enlarge or Shrink By Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas 为纸面 to Page 为页面 Set Shape to Image Clip Set the Shape to the Clipping Path of the Image OODPlug This document does not seem to be an OpenOffice Draw file. Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... 导入OpenOffice.org Draw...(&O) Imports OpenOffice.org Draw Files 导入OpenOffice.org Draw文件 Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features The file could not be imported 这个文件不能导入 OSGEditor 3D Properties 3D 属性 Load Model ... 读取模型... Clear Model 清除模型 Views 视图 Name: 名称: Options 选项 Solid 固态 Solid Wireframe 固态线框 Transparent 透明 Transparent Wireframe 半透明线框 Wireframe 线框 Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: 透明度: % % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None Headlamp White Day Night Hard Primary Blue Red Cube CAD CAD Artwork 艺术 Field of Vision Angle: 角度: Add View... Remove View OSGEditorDialog Default Add a new View Name: 名称: New View All Supported Formats (%1);;All Files (*) Import 3-D Model 导入 3D 模型 OdtDialog Use document name as a prefix for paragraph styles 用文档名称作为段落样式的前缀 Do not ask again 下次不问 OK 确认 Enabling this will overwrite existing styles in the current Scribus document 启用这个将覆盖当前Scribus中的现存样式 Merge Paragraph Styles 合并段落样式 Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Prepend the document name to the paragraph style name in Scribus. Prepend the document name to the paragraph style name in Scribus. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Overwrite Paragraph Styles 覆盖段落样式 OpenDocument Importer Options OpenDocument导入器选项 Cancel 取消 OldScribusFormat Scribus Document Scribus文档 Scribus 1.2.x Document Scribus 1.2.x文档 OneClick Origin 来源 Basepoint Size 尺寸 Width: 宽度: Length: 长度: Height: 高度: Angle: 角度: Remember Values 记住数值: OpenPalette empty palette 空白色盘 OpenPaletteModel Elements 元素 Visible 可见 OutlinePalette Element 元素 Name "%1" isn't unique.<br/>Please choose another. 名称 "%1" 不唯一。<br/>请选择另外一个 Group 群组 Page 页面 Free Objects 自由对象 Outline 轮廓 Enter a keyword or regular expression to filter the outline. Filter: 过滤: Ctrl+F Filter the Outline using a keyword Ctrl+F OutlineValues % % Linewidth 线宽 PDFExportDialog Save as PDF 存为PDF O&utput to File: 输出文件(&U): Cha&nge... & N 更改: Output one file for eac&h page & H 逐页输出单个文件 Open PDF after Export &Save &S 保存 Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. Save as 另存为 PDF Files (*.pdf);;All Files (*) PDF文件 (*.pdf);;全部文件 (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. %1 does not exists and will be created, continue? Cannot create directory: %1 Save As 另存为 PDFLibCore Saving PDF 正在保存为PDF Exporting Master Page: Exporting Page: Exporting Items on Current Page: 输出当前页里的项目: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Page: 页: Date: 日期: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occurred, please check available disk space PDFToolBar PDF Tools PDF 工具 PDFlib Saving PDF 保存PDF中 Exporting Master Pages: 输出母页: Exporting Pages: 输出页: Exporting Items on Current Page: 输出当前页里的项目: Page: 页: PPreview Print Preview 打印预览 All 全部 Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later 显示文档中的透明度和透明项目。需要Ghostscript 7.07或更高 Gives a print preview using simulations of generic CMYK inks, instead of RGB colors 不用RGB颜色而以CMYK墨水来模拟打印预览 Enable/disable the C (Cyan) ink plate 启用/停用 C (青)墨水板 Enable/disable the M (Magenta) ink plate 启用/停用 M (洋红)墨水板 Enable/disable the Y (Yellow) ink plate 启用/停用 Y (黄)墨水板 Enable/disable the K (Black) ink plate 启用/停用 K (黑)墨水板 Anti-alias &Text &T 反锯齿文本 Anti-alias &Graphics &T 反锯齿图像 Display Trans&parency &P 显示透明度 &Display CMYK &D 显示CMYK &C &C &M &M &Y &Y &K &K Preview Settings 预览设置 &Under Color Removal &U 清除底色 Separation Name 分离名称 Cyan Magenta 洋红 Yellow Black Scaling: 伸缩: Print... 打印... Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts 在阅读器中提供更加悦目的文本显示,代价是预览稍微缓慢。这只影响Type 1字体 Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing 在预览中提供了对TrueType字体,OpenType字体,EPS,PDF和矢量图更加悦目的显示,代价是预览速度轻微的缓慢。 A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. 调整页面的伸缩比例 Close 关闭 File 文件 Enable &Antialiasing Fit to Width Fit to Height Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings 显示设置 Mirror Page(s) Horizontal 页水平镜像 Mirror Page(s) Vertical 页垂直镜像 Print in Grayscale 灰度打印 Convert Spot Colors Apply ICC Profiles 应用ICC配置文件 Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. Allows you to embed ICC profiles in the print stream when color management is enabled Allows you to embed ICC profiles in the print stream when colour management is enabled Apply Color Profiles Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins Display Ink Coverage Threshold: % None PSLib Processing Master Pages: 正处理母页中: Exporting Pages: 导出页面: Processing Master Page: Exporting Page: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PStyleW Properties 属性 Tabulators and Indentation 制表符和缩进 Drop Caps 首字下沉 PStyleWBase Properties 属性 Drop Caps 首字下沉 Tabulators and Indentation 制表符和缩进 PageItem Image 图像 Text 文本 Line 线条 Polygon 多边形 Polyline 线套 PathText 路径文本 Symbol Copy of Copy of PageItemAttributes None Relates To 相对于 Is Parent Of 是...的父级 Is Child Of 是...的子级 None relationship Page Item Attributes 页面项目属性 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear 清除(&L) Alt+L Alt+L &OK &O 确认 &Cancel &C 取消 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To Attributes 属性 PageItemAttributesBase Page Item Attributes 页面项目属性 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To 关系于 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L &OK &O 确认 &Cancel &C 取消 PageItem_ImageFrame Picture 图片 Preview Settings 预览设置 Image 图像 Embedded Image File: Original PPI: Actual PPI: Size: Colorspace: 颜色模式: Unknown 未知 Page: 页: Pages: Embedded Image missing missing No Image Loaded PageItem_LatexFrame Error 错误 Running the external application failed! Could not create a temporary file to run the application! Information 信息 Running the application "%1" failed! Running The application "%1" crashed! Application DPI DPI State Finished Render This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? The config file didn't specify a executable path! The application "%1" failed to start! Please check the path: Render Frame No configuration defined to run the application! No application defined Rendering... Render Error PageItem_OSGFrame OSG Default 3D Model File: PageItem_PathText Paragraphs: 段落: Lines: 行: Words: 词: Chars: 字符: PageItem_TextFrame Linked Text 串联的文本 Text Frame 文本框 Paragraphs: 段落: Lines: 行: Words: 词: Chars: 字符: PageLayouts Page Layout 页面排版 First Page is: 第一页是: Document Layout 文档设计布局 Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Double sided 双面 Middle Right 中右 Drag pages or master pages onto the trashbin to delete them 把页面或者母页拖拉到垃圾箱里来删除它们 Here are all your master pages. To create a new page, drag a master page to the page view below 这是你所有的母页。要创建新页,请把母页拖拉到下面页面视图 Normal 普通 Arrange Pages 管理页 Available Master Pages: 可用母页: Document Pages: 文档页: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. This master page is used at least once in the document. Do you really want to delete this master page? 你确认要删除这个母页吗? PageSelector %1 of %2 %1 of %2 %1 of %1 %1 of %1 Go to the first page Go to the previous page Go to the next page Go to the last page Select the current page of %1 number of pages in document PageSize Quarto Quarto Foolscap Foolscap Letter Letter Government Letter Government Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium 中等 Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E PaintManagerBase Manage Paints <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> <tr> <td style="border: none;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</p></td></tr></table></body></html> 1 Import colors to the current set from an existing document 从现存文档中导入颜色组合到当前组合 &Import Create a new color within the current set Add Edit the currently selected color &Edit &E 编辑 Make a copy of the currently selected color D&uplicate Delete the currently selected color &Delete &D 删除 Remove unused colors from current document's color set 从当前文档颜色组合清除未用颜色 &Remove Unused &R 清除未用的 Color Sets 颜色组合 Current Color Set: 当前颜色组合 ... Save the current color set 保存当前颜色组合 &Save Color Set &S 保存颜色组合 Make the current colorset the default color set OK Cancel PaintManagerDialog Solid Colors Gradients Scribus Swatches User Swatches Merge Color Set Sort by Name 分类——命名 Sort by Color Sort by Type 分类——类型 New Gradient New Color Copy of %1 Selected Colors Do you really want to clear all your gradients? Do you really want to clear all your colors and gradients? All Supported Formats Scribus Gradient Files "*.sgr" (*.sgr *.SGR);; Gimp Gradient Files "*.ggr" (*.ggr *.GGR);; All Files (*) Open All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors Information 信息 The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. &Name: &N 名称: Choose a Name ParaStyleComboBox No Style 没有样式 PathAlongPathPlugin Path Along Path... Bends a Polygon along a Path. Path Tools 路径工具 Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Starting Point End Point a straight Line Points moving Preview on Canvas Connect First Line with Second Line by using: PathConnectPlugin Connect Paths Connects two Paths. Path Tools 路径工具 Connect 2 Polylines. PathCutPlugin Cut Polygon Cuts a Polygon with a Path. Path Tools 路径工具 Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error 错误 The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 180° 270° PathFinderBase Boolean Path Operations + + = Operation ... Swap Shapes Options 选项 First source shape. Second source shape. The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors Stroke: Fill: Keep a copy of the original item after applying the operation Keep Subtracts the second shape from the first shape Exchange the Source Shapes The resulting shape uses the color of the first source shape First Shape The resulting shape uses the color of the second source shape Second Shape The resulting shape uses the colors listed below Stroke Color 边颜色 Fill Color 填充颜色 Result Takes Color from: PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools 路径工具 Path Operations Apply fancy boolean operations to paths. Qt Version too old This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Path Tools 路径工具 Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory 选择一个目录 Loading Patterns All Files (*) 所有文件 (*) Open Patterns Load File Load Set Remove Remove All OK Cancel 取消 &Name: &N 名称: Rename Entry All Supported Formats Rename 重命名 PatternPropsDialog Pattern Properties pt pt % Offsets X: X: Y: Y: Scaling X-Scale: Y-Scale: Rotation Skewing Spacing Value: 数值: X-Skew: Y-Skew: Angle: 角度: Flip: Close 关闭 PctPlug Importing: %1 Analyzing File: Group%1 Generating Items PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Result 结果 Search Results for: 搜索结果给: Preview 预览 Select 选择 Cancel 取消 Size: 尺寸 Resolution: DPI DPI Unknown 未知 RGB RGB CMYK CMYK Grayscale 灰度 Colorspace: 颜色模式: &Preview &P 预览 Alt+P Alt+P &Select Alt+S Alt+S PicSearchBase Result 结果 Search Results for: 搜索结果给: &Preview &P 预览 PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search 取消查找 Start Search Select a base directory for search 选择查找的一个基础目录 Scribus - Image Search Scribus-图像查找 The search failed: %1 查找失败: %1 Search Images Search for: 查找: Start at: Change... 更改... Searching Case insensitive search Search recursively Base directory for search does not exist. Please choose another one. PicStatus Goto 跳到 Yes OK 确认 Missing 丢失 Search 查找 Name 名称 Path 路径 Page Print 打印 Status 状态 Cancel Search 取消查找 Manage Pictures 管理图片 Scribus - Image Search Scribus-图像查找 The search failed: %1 查找失败: %1 No images named "%1" were found. 图像名叫 "%1" 的没找到。 Select a base directory for search 选择查找的一个基础目录 Close 关闭 Not on a Page JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD Unknown 未知 RGB RGB CMYK CMYK Grayscale 灰度 n/a Information 信息 Path: 路径: Search... Name: 名称: Image 图像 DPI: DPI: Format: 格式: Colorspace: 颜色模式: Size 尺寸 Pixels: Scale: 缩放: Printed: Layout On Page: Select 选择 Image Tools Set format specific properties of certain image types, like clipping paths Image Visible Image Effects... Edit Image... 编辑图片... Extended Image Properties... Sort by Name 分类——命名 Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections More 更多 Always on Top 置顶 Sort by Name 分类——命名 Sort by Date 分类——日期 Sort by Size 分类——大小 Sort by Type 分类——类型 Change sortorder 改变排列顺序 Zoom in 拉近放大 Zoom out 拉远缩小 Go to Page Preview Images Only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close 关闭 Information 信息 File 文件 Name: 名称: Path: 路径: Size: 大小: Date: 日期: Image 图像 Format: 格式: Width: 宽度: Colorspace: 颜色空间: Height: 高度: DPI: DPI: Layers: 图层: Embedded Profile: 镶入配置文件: Profile Name: 配置文件名称: Filter / Search 过滤 / 搜索 Filters: 过滤: Filter Displayed Images Search Images Filter Collections ... Criteria << Add Name (Wildcards Allowed) Date 日期 Size 尺寸 Type 类型 Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s): Image Frame(s): Page(s) 页面 Position of New Frame(s) Top Left of Margins Top Left of Page Top Left of Bleed Custom Position X: X: Y: Y: Same as Page Margins Same as Page Same as Bleed Custom Size Insert Image into 0 Page(s) 0 Frame(s) Insert 插入 Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser... PixmapExportPlugin Save as &Image... &I 另存为图片... Export As Image 作为图像导出 Exports selected pages as bitmap images. 把选中的页面导出为位图。 Save as Image 另存为图像 Error writing the output file(s). 写入输出文件错误。 Export successful The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager 无法找到插件 unknown error plugin manager 未知错误 Cannot find symbol (%1) plugin manager 不能找到标记 (%1) Plugin: loading %1 plugin manager 插件:正在加载 %1 init failed plugin load error init failed unknown plugin type plugin load error 未知插件类型 Plugin: %1 loaded plugin manager 插件: %1 已经加载 Plugin: %1 failed to load: %2 plugin manager 插件: %1 不能加载: %2 Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager 插件管理器 Plugin 插件 How to run 如何运行 Type 类型 Load it? 加载它吗? Plugin ID 插件ID File 文件 Yes No You need to restart the application to apply the changes. 你必须重新启动程序来应用更改。 Form 表格 PolygonProps Polygon Properties 多边形属性 PolygonWidget Corn&ers: &E 角数: &Rotation: &R 旋转: Apply &Factor &F 应用因式 % % &Factor: &F 因式: Number of corners for polygons 多边形的角数 Degrees of rotation for polygons 多边形的旋转角度 Apply Convex/Concave Factor to change shape of Polygons 应用凹凸大小来改变多边形的形状 Sample Polygon 多边形样本 A negative value will make the polygon concave (or star shaped), a positive value will make it convex 一个负数值将会使多边形变为凹形(或者星形),一个正数值将使它成为凸形。 PolygonWidgetBase Form 表格 Corn&ers: &E 角数: Number of corners for polygons 多边形的角数 &Rotation: &R 旋转: Degrees of rotation for polygons 多边形的旋转角度 Sample Polygon 多边形样本 Apply Convex/Concave Factor to change shape of Polygons 应用凹凸大小来改变多边形的形状 Apply &Factor &F 应用因式 &Factor: &F 因式: A negative value will make the polygon concave (or star shaped), a positive value will make it convex 一个负数值将会使多边形变为凹形(或者星形),一个正数值将使它成为凸形。 % C&urvature: PositionSetterWidget Form 表格 X-pos: Y-pos: Width: 宽度: Height: 高度: ... Preferences Preferences 首选项 General 常规 Document 文档 Guides 参考线 Typography 排版 Tools 工具 Scrapbook 寄存本 Display 显示 GUI 图形界面 Paths 路径 Page Size 页面大小 Custom 自定义 Portrait 竖式 Landscape 横式 Margin Guides 页边距参考线 Autosave 自动保存 min 分钟 pt pt Other Options 其它选项 Preview 预览 Small Medium Choose a Directory 选择一个目录 External Tools 外部工具 Image Processing Tool 图像处理工具 Printing 打印 Default font size for the menus and windows 菜单和窗口的默认字体大小 Default unit of measurement for document editing 文档编辑默认的长度单位 Number of lines Scribus will scroll for each move of the mouse wheel Scribus鼠标滚轮每次滚动移动行数 Number of recently edited documents to show in the File menu 在文件菜单里显示最近编辑文档数目 Default documents directory 默认文档目录 Default Scripter scripts directory 默认脚本器脚本目录 Default page size, either a standard size or a custom size 默认页面尺寸,或是标准的,或是自定义的尺寸 Default orientation of document pages 默认文档页面方向 Width of document pages, editable if you have chosen a custom page size Width of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Time period between saving automatically Time period between saving automatically Choose the size of the preview in the scrapbook palette Choose the size of the preview in the scrapbook palette Color for paper Colour for paper Mask the area outside the margins in the margin color Mask the area outside the margins in the margin colour Set the default zoom level Set the default zoom level Antialias text for EPS and PDF onscreen rendering Antialias text for EPS and PDF onscreen rendering Antialias graphics for EPS and PDF onscreen rendering Antialias graphics for EPS and PDF onscreen rendering Do not show objects outside the margins on the printed page or exported file Do not show objects outside the margins on the printed page or exported file Save the scrapbook contents everytime after a change Save the scrapbook contents everytime after a change &Theme: &T 主题: &Wheel Jump: &W 滚轮跳行: &Recent Documents: &R 最近文档: &Documents: &D 文档: &Change... &C 更改... &ICC Profiles: &ICC配置文件: C&hange... &H 更改... &Scripts: &S 脚本: Ch&ange... &A 更改... &Size: &S 尺寸: Orie&ntation: &N 方向: &Width: &W 宽度: &Height: &H 高度: &Bottom: &B 底部: &Top: &T 顶部: &Right: &R 右: &Left: &L 左: &Interval: &I 间隔: Sa&ve Contents on Changes &V 更改时保存内容 Large Display &Unprintable Area in Margin Color &U 用页边颜色标出非打印区域 &Adjust Display Size &A 调整显示尺寸 &Name of Executable: &N 可执行文件的名称: Antialias &Text &T 反锯齿文本 Antialias &Graphics &G 反锯齿图形 Name of &Executable: &E 可执行文件的名字: Clip to Page &Margins &M 按页边距线裁剪 Apply &Under Color Removal &U 应用底色清除 Cha&nge... &N 更改... &Language: &L 语言: Document T&emplates: &E 模板: Units: 单位: Undo/Redo 撤销/重做 Action history length 动作历史长度 Hyphenator 连字符 Fonts 字体 Color Management 色彩管理 PDF Export PDF输出 Document Item Attributes 文档项目属性 Table of Contents and Indexes 内容和索引 Keyboard Shortcuts 键盘快捷键 Page Display 页面显示 Color: 颜色: Alt+U Alt+U Show Pictures 显示图像 Show Text Chains 显示文本链 Show Frames 显示框体 Scratch Space 草稿区 Miscellaneous 其它 Plugins 插件 Turns the display of frames on or off 开闭框体显示 Turns the display of pictures on or off 开闭图片显示 Additional directory for document templates 文档模板的额外目录 Filesystem location for the Ghostscript interpreter Ghostscript解析器在文件系统里的位置 Always ask before fonts are replaced when loading a document 载入文档是总是询问是否替换字体 Show Text Control Characters 显示文本控制符 Preview of current Paragraph Style visible when editing Styles 当编辑样式时显示当前段落样式的预览 To adjust the display drag the ruler below with the slider. 要调节显示,拖拉标尺下面的滑动按钮 Display non-printing characters such as paragraph markers in text frames Display non-printing characters such as paragraph markers in text frames Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Preflight Verifier 印前检验器 dpi dpi Resolution: 分辨率: Lorem Ipsum 范例文本 Always use standard Lorem Ipsum 总是使用标准的范例文本 Count of the Paragraphs: 段落数: Rulers relative to Page 标尺相对于页面 Gaps between Pages 页面之间的间距 Horizontal: 水平: Vertical: 垂直: Show Startup Dialog 显示启动对话 Locate Ghostscript 定位 Ghostscript Locate your image editor 定位图像编辑器 PostScript Interpreter PostScript解析器 Enable or disable the display of linked frames. 开闭连锁框体显示。 Select your default language for Scribus to run with. Leave this blank to choose based on environment variables. You can still override this by passing a command line option when starting Scribus 选择你要Scribus默认使用的语言。留白将默认使用系统环境设定。你还可以在命令行运行Scribus时给出选项。 &Font Size (Menus): &F 字体大小(菜单): Font Size (&Palettes): 字体大小(&P 调色板): Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Default font size for the tool windows 工具窗口的默认尺寸大小 Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. File system location for graphics editor. If you use gimp and your distro includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp. File system location for graphics editor. If you use gimp and your distro includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Printer 打印机 PreferencesDialog Preferences 首选项 Export... Defaults &Apply &A 应用 &OK &O 确认 &Cancel &C 取消 User Interface Paths 路径 Document Setup 文档设置 Guides 参考线 Typography 排版 Item Tools Operator Tools Hyphenator 连字符 Fonts 字体 Printer 打印机 Color Management 色彩管理 Document Information 文档信息 PDF Export PDF输出 Preflight Verifier 印前检验器 Document Item Attributes 文档项目属性 Tables of Contents Sections 区域 Keyboard Shortcuts 键盘快捷键 Scrapbook 寄存本 Display 显示 External Tools 外部工具 Miscellaneous 其它 Page Sizes Plugins 插件 Image Cache Short Words Short Words PrefsDialogBase &Defaults &D 默认 Save... 保存... Save Preferences 保存首选项 Export... &Apply &A 应用 All preferences can be reset here Apply all changes without closing the dialog Export current preferences into file PrefsManager Postscript Postscript PDF 1.3 PDF 1.3 PDF 1.4 PDF 1.4 PDF/X-3 PDF/X-3 Migrate Old Scribus Settings? 迁移旧的Scribus设置 Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Scribus检测到现存的Scribus 1.2的设置文件。 你想要迁移他们到新的Scribus版本中吗? Single Page 单页 Double sided 双页 Left Page 左页 Right Page 右页 3-Fold 3折 Middle 中间 4-Fold 4折 Middle Left 中左 Middle Right 中右 PostScript PostScript Could not open preferences file "%1" for writing: %2 不能打开首选项文件 "%1" 来写入 %2 Scribus has detected existing Scribus 1.3.5 preferences files. Do you want to migrate them to the new Scribus version? Scribus检测到现存的Scribus 1.2的设置文件。 你想要迁移他们到新的Scribus版本中吗? {1.3.5 ?} Writing to preferences file "%1" failed: QIODevice status code %2 写入 "%1" 失败: QIODevice 状态代码: %2 Failed to open prefs file "%1": %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Failed to read prefs XML from "%1": %2 at line %3, col %4 Error Writing Preferences 错误写入首选项 Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. Error Loading Preferences Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. Scribus无法载入它的首选项 <br>%1<br< 默认设置将被载入 No valid renderframe config found. Using defaults! Prefs_ColorManagement Form 表格 Color Management 色彩管理 Document Options Activate Color Management Simulate Printer on the Screen Convert all colors to printer space Mark Colors out of Gamut Use Blackpoint Compensation Document Profiles RGB Images: CMYK Images: RGB Solid Colors: CMYK Solid Colors: Printer: Document Rendering Intents Images: 图像: Solid Colors: 单色 Monitor Profile Monitor: Monitor profiles can only be changed when no documents are open Perceptual Relative Colorimetric 相对比色 Saturation 饱和度 Absolute Colorimetric 绝对比色 Prefs_Display Form 表格 Display 显示 Page Display 页面显示 Show Images Show Text Control Characters 显示文本控制符 Show Rulers 显示标尺 Show Rulers Relative to Page Show Text Chains Show Frames 显示框体 Show Layer Indicators Show Unprintable Area in Margin Color Show Bleed Area Show Page Shadow Show Preflight Verifier Warnings on the Page Scratch Space 草稿区 Left: Right: 右边: Top: 顶部: Bottom: 底部: Display Scaling Scratch Space: Gaps Between Pages 页面间隔 Pages Horizontal: 水平: Vertical: 垂直: Adjust Display Size 调整显示大小 Scale% 比例% Resets the scale to the default dpi of your display Colors 颜色 Page Fill: 页面充填 Selected Page Border: Frames: 框: Locked Frames: 锁定的框: Selected Frames: 选定的框: Linked Frames: 链接的框: Grouped Frames: 成组的框: Annotation Frames: Text Control Characters: Color for paper (onscreen) Mask the area outside the margins in the margin color Enable or disable the display of linked frames. 开闭连锁框体显示。 Display non-printing characters such as paragraph markers in text frames Turns the display of frames on or off 开闭框体显示 Turns the display of layer indicators on or off Turns the display of images on or off Turns the page shadow on or off Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Set the default zoom level Set the default zoom level Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size dpi dpi Prefs_DocumentInformation Form 表格 Document Information 文档信息 Document 文档 Title: 标题: Author: Subject: Keywords: 关键词: Description: 描述: Further Information Publisher: Contributors: Date: 日期: Type: 类型: Format: 格式: Identifier: Source: Language: Relation: Coverage: Rights: Prefs_DocumentItemAttributes Document Item Attributes 文档项目属性 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To Auto Add To 自动添加到 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L None relationship Relates To Is Parent Of Is Child Of None auto add Text Frames 文本框 Image Frames 图片框 None types Boolean 布尔型 Integer 整数 Real Number String 字串 Prefs_DocumentSections 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections 文档区域 Name 名称 Shown 显示 From 来自 To Style 样式 Start 开始 Field Width Fill Character &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D Prefs_DocumentSetup Form 表格 Document Setup 文档设置 Page Size Size: ... Orientation: Units: 单位: Width: 宽度: Height: 高度: Apply changes to all pages Apply changes to all master pages Layout Page Layout 页面排版 Saving && Undo Save in Compressed Format Autosave 自动保存 Enable Automatic Saving of Documents Interval: min Undo / Redo Enable Undo/Redo System Action History Length: Single Page 单页 pageLayoutButtonGroup Double Page 3-Fold 3折 4-Fold 4折 First Page is: 第一页是: Size 尺寸 Margins && Bleeds Margins 边距 Bleeds Portrait 竖式 Landscape 横式 Width of document pages, editable if you have chosen a custom page size Width of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Default page size, either a standard size or a custom size 默认页面尺寸,或是标准的,或是自定义的尺寸 Default page size, either a standard size or a custom size. More page sizes can be made visible by activating them in Preferences. Enable or disable more page sizes by jumping to Page Size preferences Default orientation of document pages 默认文档页面方向 Default unit of measurement for document editing When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Time period between saving automatically Time period between saving automatically Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Set the length of the action history in steps. If