getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list 返回文档中所有预设的颜色名称的列表 newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool 显示 "新建文档" 对话窗口。如果用户接受了设定,一个新文挡将被创建。如果用户按取消键,文档将不被创建。如果信文档被创建,返回真。 getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). importSVG("string") The "string" must be a valid filename for a SVG image. The text must be UTF8 encoded or 'unicode' string(recommended). newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. @default getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) 生成一个叫 pageName 的新母页,并且打开它来编辑 deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) 删除命名的母页 zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) 在主图形界面窗口缩放文件。动作包括整数值如20.0,100.0,等待。缩放以-100作为记号。 About Contributions from: 贡献者: &About &A 关于 A&uthors &U 作者 &Translations &T 翻译 &Online &O 在线资料 &Close &C 关闭 Development Team: 开发团队 Official Documentation: 官方文档: Other Documentation: 其他文档: Homepage 主页 Online Reference 在线参考 Bugs and Feature Requests 纠错和功能请求 Mailing List 邮件列表 Official Translations and Translators: 官方翻译和翻译者: Previous Translation Contributors: 先前翻译贡献者: About Scribus %1 关于 %1 Windows Port: Windows 移植: Mac OSX Aqua Port: Mac OSX Aqua 移植: Wiki Wiki %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 当前Ghostscript版本 %1 No Ghostscript version available Ghostscript不可知 <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: 编译 ID: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 这个面板显示Scribus版本,编译日期以及编译进去的库支持。这里C-C-T-F指的是C=littlecms C=CUPS T=TIFF 支持 F=Fontconfig 支持。最后一个字母是渲染器 C=cairo 或者 A=libart。不存在的库支持以*号表示。这个也注明了Scribus检测到的Ghostscript版本号 January AboutPlugins Yes No AboutPluginsBase Scribus: About Plug-ins Scribus: 关于插件 File Name: 文件名: Version: 版本: Enabled: 启用: Release Date: 发布日期: Copyright: 版权: Author(s): 作者: Description: 描述: License: 授权: &Close &C 关闭 Alt+C Alt+C ActionManager &Image Effects &I 图像效果 &Tabulators... &T 制表符... &New &N 新建 &Open... &O 打开... &Close &C 关闭 &Save &S 保存 Save &As... &A 另存为... Re&vert to Saved &V 恢复到已保存 Collect for O&utput... &U 准备输出... Get Text... 导入文本... Append &Text... &T 追加文本... Get Image... 导入图像... Save &Text... &T 保存文本... Save Page as &EPS... &E 页面存为EPS... Save as P&DF... &D 保存为PDF... Document &Setup... &S 文档设置... &Print... &P 打印... &Quit &Q 退出 &Undo &U 撤销 &Redo &R 重做 &Item Action Mode &I 项目动作模式 Cu&t &t 剪切 &Copy &C 复制 &Paste &P 粘贴 C&lear Contents &L 清除内容 Select &All &A 全选 &Deselect All &D 取消全选 &Search/Replace... &S 查找/替换... C&olors... &O 颜色... &Paragraph Styles... &P 段落样式... &Line Styles... &L 线条样式... &Master Pages... &M 母页... P&references... &R 首选项... %1 pt %1 pt &Other... &O 其他... &Left &L 左边 &Center &C 中间 &Right &R 右边 &Block &B 区块 &Forced &F 强制 &%1 % &%1 % &Normal &N 普通 &Underline &U 下划线 Underline &Words &W 添加下划线 &Strike Through &S 中划线 &All Caps &A 全部大写 Small &Caps &C 小写 Su&perscript &P 上标 Su&bscript &B 下标 &Outline &O 文档结构树 D&uplicate &U 复制 &Multiple Duplicate &M 多重复制 &Delete &D 删除 &Group &G 群组 &Ungroup &U 解散群组 Is &Locked &L 锁定 Si&ze is Locked &Z 大小锁定 Lower to &Bottom &B 降低到底部 Raise to &Top &T 升高到顶部 &Lower &L 降低 &Raise &R 升高 Send to S&crapbook &C发送到寄存本 &Attributes... &A 属性... I&mage Visible &M 显示图像 Is PDF &Bookmark &B 为PDF书签 Is PDF A&nnotation &N 为PDF注释 Annotation P&roperties &R 注释属性 Field P&roperties &R 文字域属性 &Edit Shape... &E 编辑形状... &Attach Text to Path &A 附文字到路径 &Detach Text from Path &D 从路径分离文字 &Combine Polygons &C 合并多边形 Split &Polygons &P 分离多边形 &Bezier Curve &B 齐贝尔曲线 &Image Frame &I 图像框 &Outlines &O 轮廓 &Polygon &P 多边形 &Text Frame &T 文本框 &Glyph... &G 符号... Sample Text 文本字样 &Insert... &I 插入... Im&port... &P 导入... &Delete... &D 删除... &Copy... &C 复制... &Move... &M 移动... &Apply Master Page... &A 应用母页... Manage &Guides... &G 管理参考线... &Fit in window &F 符合窗口 &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails &T 缩图 Show &Margins &M 显示边距 Show &Frames &F 显示框体 Show &Images &I 显示图像 Show &Grid &G 显示网格 Show G&uides &U 显示参考线 Show &Baseline Grid &B 显示底线网格 Show &Text Chain &T 显示文本链 Sn&ap to Grid &A 吸附到网格 Sna&p to Guides &P 吸附到参考线 &Properties &P 属性 &Scrapbook &S 寄存本 &Layers &L 图层 &Bookmarks &B 书签 &Measurements &M 尺寸 Action &History &H 动作历史 Preflight &Verifier &V 印前检验器 &Tools &工具 P&DF Tools P&DF 工具 Select Item 选择项目 T&able &A 表格 &Shape &S 形状 &Line &L 线条 &Freehand Line &F 手绘线 Rotate Item 旋转项目 Zoom in or out 放大或缩小 Zoom in 放大 Zoom out 缩小 Edit Contents of Frame 编辑框内容 Link Text Frames 串联文本框 Unlink Text Frames 解链文本框 &Eye Dropper &E 取色器 Copy Item Properties 复制项目属性 Edit the text with the Story Editor 用故事编辑器编辑文本 Insert Text Frame 插入文本框体 Insert Image Frame 插入图像框体 Insert Table 插入表格 Insert Shape 插入形状 Insert Polygon 插入多边形 Insert Line 插入线 Insert Bezier Curve 插入齐贝尔曲线 Insert Freehand Line 插入手绘线 &Manage Pictures &M 管理图片 &Hyphenate Text &H 用连字符连字 &Generate Table Of Contents &G 生成目录索引 &About Scribus &A 关于Scribus About &Qt 关于 &Qt Toolti&ps &P 提示 Scribus &Manual... &M Scribus 使用手册... Smart &Hyphen &H 智能连字符 Non Breaking &Space &S 不间断空格 Page &Number &N 页码 Copyright 版权 Registered Trademark 注册商标 Trademark 商标 Bullet 项目符号 Em Dash Em 破折号 En Dash En 破折号 Figure Dash 图形破折号 Quotation Dash 引用破折号 Apostrophe 上标点 Straight Double 双倍直线 Single Left 单面左边 Single Right 单面右边 Double Left 双面左边 Double Right 双面右边 Single Reversed 单面反转 Double Reversed 双面反转 Single Left Guillemet 左单引号 Single Right Guillemet 右单引号 Double Left Guillemet 左双引号 Double Right Guillemet 右双引号 Low Single Comma 下单逗号 Low Double Comma 下双逗号 CJK Single Left 中日韩左单 CJK Single Right 中日韩右单 CJK Double Left 中日韩双左 CJK Double Right 中日韩双右 Toggle Palettes 切换色板 S&hadow &H 阴影 &Low Resolution &L 底分辨率 &Normal Resolution &N 正常分辨率 &Full Resolution &F 完全分辨率 Edit Image... 编辑图片... &Update Image &U 刷新图片 Adjust Frame to Image 调整框体适应图片大小 Extended Image Properties 图片扩展属性 Show Control Characters 显示控制符 &Align and Distribute &A 对齐和分布 Edit Text... 编辑文本... New Line 新建线条 Frame Break 分框 Column Break 分列 Non Breaking Dash 不间断破折号 Toggle Guides 切换参考线 &Arrange Pages &A 安排页 Dehyphenate Text 取消连字符 Manage Page Properties... 管理页面属性... Rulers relative to Page 标尺相对应于页面 Print Previe&w &W 打印预览 &JavaScripts... &JavaScripts... Convert to Master Page... 转换为母页... &Cascade &C 层叠 &Tile &T 平铺 &About Plug-ins &A 关于插件 More Info... 更多信息... AlignDistributePalette Align and Distribute 对齐和分布 Align 对齐 &Relative to: &R 对应于: First Selected 先选择 Last Selected 后选择 Page Margins 边距 Selection 选择 Align right sides of objects to left side of anchor 对象的右边和锚点的左边对齐 Align left sides of objects to right side of anchor 对象的左边和锚点的右边对齐 Align bottoms 底部对齐 Align right sides 右边对齐 Align tops of objects to bottom of anchor 对象顶部和锚点底部对齐 Center on vertical axis 以垂直轴居中 Align left sides 左边对齐 Center on horizontal axis 以水平轴居中 Align bottoms of objects to top of anchor 对象底部和锚点顶部对齐 Align tops 顶部对齐 Distribute 分布 Distribute left sides equidistantly 左边等距分布 Distribute bottoms equidistantly 底部等距分布 Distribute centers equidistantly horizontally 中间水平等距分布 Make vertical gaps between objects equal 让对象垂直间距相等 Distribute centers equidistantly vertically 中间垂直等距分布 Distribute tops equidistantly 顶部等距分布 Distribute right sides equidistantly 右边等距分布 Guide 参考线 &Selected Guide: &S 已选参考线: Make horizontal gaps between objects equal 让对象水平间距相等 Make horizontal gaps between objects equal to the value specified 让对象水平间距和指定值相等 Make vertical gaps between objects equal to the value specified 让对象垂直间距和指定值相等 &Distance: &D 间距: Distribute the items with the distance specified 按指定的间距分布项目 None Selected 没有选定 Some objects are locked. 某些对象被锁定 &Unlock All &U 全部解锁 Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 AlignSelect Align Text Left 文本左对齐 Align Text Right 文本右对齐 Align Text Center 文本居中对齐 Align Text Justified 文本两端对齐 Align Text Forced Justified 文本强制两端对齐 Annot Field Properties 域属性 Type: 类型: Button 按钮 Text Field 文本域 Check Box 勾选框 Combo Box 多选框 List Box 列举框 Properties 属性 Name: 名称: Tool-Tip: 工具提示: Text 文本 Border Color: 颜色: None Width: 宽度: Thin Normal 正常 Wide Style: 样式: Solid Dashed Underline 下划线 Beveled 斜面 Inset 凹入 Other 其他 Read Only 只读 Required 必需 Don't Export Value Don't 输出值 Visibility: 可见度: Visible 可见 Hidden 隐蔽 No Print 不可打印 No View 不可查看 Appearance 外观 Text for Button Down 按钮下陷文本 Text for Roll Over 鼠标经过文本 Icons 图标 Use Icons 使用图标 Remove 移除 Pressed 按下 Roll Over 鼠标经过 Icon Placement... 图标位置... Highlight 高亮 Invert 反转 Outlined 概要 Push Multi-Line 多行 Password 密码 Limit of 限制于 Characters 字符 Do Not Scroll 不要滚动 Do Not Spell Check 不拼写检查 Check Style: 勾选样式: Check 勾选 Cross 十字 Diamond 宝石 Circle 圆形 Star 星星 Square 方形 Default is Checked 默认已勾选 Editable 可编辑 Options 选项 Go To 转到 Submit Form 提交表单 Reset Form 清空表单 Import Data 导入数据 Event: 事件: Mouse Up 鼠标上移 Mouse Down 鼠标下移 Mouse Enter 鼠标进入 Mouse Exit 鼠标退出 On Focus 聚焦 On Blur 模糊 Script: 脚本: Edit... 编辑... Submit to URL: 提交到URL地址: Submit Data as HTML 作为HTML来提交数据 Import Data from: 从...导入数据: Destination 目的地 To File: 到文件: Change... 更改... Page: 页: X-Pos: X-坐标: pt pt Y-Pos: Y-坐标: Action 动作 Field is formatted as: 域格式化为: Plain Number 数字 Percentage 百分数 Date 日期 Time 时间 Custom 自定义 Number Format 数字格式 Decimals: 十进制: Use Currency Symbol 使用货币符号 Prepend Currency Symbol 预设货币符号 Formatting 格式 Percent Format 百分数格式 Date Format 日期格式 Time Format 时间格式 Custom Scripts 自定义脚本 Format: 格式: Keystroke: 按键: Format 格式 Value is not validated 为验校值 Value must be greater than or equal to: 值必须大于或等于: and less or equal to: 而且小于或等于: Custom validate script: Custom validate script: Validate 检验 Value is not calculated 没有计算值 Value is the 值是 sum 求和 product 相乘 average 平均 minimum 最小值 maximum 最大值 of the following fields: 下面域: Pick... 选择... Custom calculation script: 自定义计算脚本: Calculate 计算 OK 确定 Cancel 取消 Enter a comma separated list of fields here 在此输入以逗号隔开的域列表 You need at least the Icon for Normal to use Icons for Buttons 你最起码需要用于普通的图标来使用按钮的图标 Open 打开 Example: 范例: Selection Change 选择更改 Font for use with PDF 1.3: 用于PDF 1.3的字体: Flag is ignored for PDF 1.3 选项被PDF 1.3所忽略 PDF Files (*.pdf);;All Files (*) PDF 文件 (*.pdf);;全部文件 (*) JavaScript JavaScript Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) 图像 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全部文件 (*) Annota Annotation Properties 注释属性 Text 文本 Link 链接 External Link 外部链接 External Web-Link 外部网页链接 Destination 目的地 pt pt Open 打开 PDF-Documents (*.pdf);;All Files (*) PDF文件 (*.pdf);;全部文件 (*) &Type: &T 类型 C&hange... &H 更改... &Page: &P 页: &X-Pos &X-坐标: &Y-Pos: &Y-坐标: ApplyMasterPageDialog Normal 普通 Apply Master Page 应用母页 &Master Page: &M 母页: Apply To 应用到 Current &page &P 当前页 Alt+P Alt+P &Even pages &偶数页 Alt+E Alt+E O&dd pages &D 奇数页 Alt+D Alt+D &All pages &A 全部页 Alt+A Alt+A &Within range &W 在范围内 Alt+W Alt+W to to Alt+O Alt+O Alt+C Alt+C Apply the selected template to even, odd or all pages within the following range 在以下的范围内应用所选的模板到偶数页、奇数页或者全部页面 ArrowChooser None Biblio Scrapbook 寄存本 Scrapbooks (*.scs);;All Files (*) 寄存本 (*.scs);;全部文件 (*) Delete 删除 Object 对象 New Entry 新项目 Rename 重命名 &New &N 新建 &Load... &L 加载... &Save &S 保存 Save &As... &A 保存为... &Close &C 关闭 &Small &S 小 &Medium &M 中 &Large &L 大 &File &F 文件 &Preview &P 预览 &Name: &N 名称: Name "%1" is not unique. Please choose another. 名称 "%1"非唯一,请另选 BookMView Bookmarks 书签 Move Bookmark 移动书签 Insert Bookmark 插入书签 Cancel 取消 BookPalette Bookmarks 书签 ButtonIcon Icon Placement 图标位置 Layout: 版面: Caption only 仅标题 Icon only 仅图标 Caption below Icon 图标在标题上面 Caption above Icon 标题在图标上面 Caption right to Icon 标题在图标右边 Caption left to Icon 标题在图标左边 Caption overlays Icon 标题覆盖图标 Scale: 缩放: Always 总是 When Icon is too big 当图标太大 Never 从不 Scale How: 如何缩放: Proportional 按比例 Non Proportional 不按比例 Icon 图标 OK 确定 Cancel 取消 Reset 重置 When Icon is too small 当图标太大 CMSPrefs System Profiles 系统配置文件 Rendering Intents 渲染意图 Perceptual 感官 Relative Colorimetric 相对比色 Saturation 饱和度 Absolute Colorimetric 绝对比色 Default color profile for solid colors on the page 默认页面单色的颜色配置文件 Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Colour profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Colour profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your monitor. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. 在屏幕上显示可能不能正确打印的颜色的方法。 这需要非常精确的配置文件而且仅用于警示之用。 &Activate Color Management &A 激活色彩管理 &Solid Colors: &S 单色: &Monitor: &M 监视器: P&rinter: &R 打印机 M&onitor: &O 监视器 Pr&inter: &I 打印机 Sim&ulate Printer on the Screen &U 在监视器上模拟打印机 Mark Colors out of &Gamut &G 标出超出范围的颜色 Use &Blackpoint Compensation &B 使用黑点补偿 &RGB Pictures: &RGB 图像: &CMYK Pictures: &CMYK 图像: Default color profile for imported CMYK images 导入的CMYK图像的默认颜色配置文件 Default color profile for imported RGB images 导入的RGB图像的默认颜色配置文件 CMYKChoose Edit Color 编辑颜色 CMYK CMYK RGB RGB Web Safe RGB 网页安全 RGB New Old C: C: M: M: Y: Y: K: K: Dynamic Color Bars 动态颜色条 Static Color Bars 静态颜色条 R: R: G: G: B: B: % % HSV-Colormap HSV-颜色表 &Name: &N 名称: Color &Model &M 颜色类型: None Is Spot Color Is Spot Colour Is Registration Color 是记录颜色 You cannot create a color named "%1". It is a reserved name for transparent color 你不能生成一个叫 "%1"的颜色。 这个是给透明色预留的名字 Name of the color is not unique 颜色名称不唯一 ChTable You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one 如果你长按鼠标右键,你能看到一个微缩图。插入键插入一个符号到选择的下面,删除键删除最后插入的符号。 CharSelect Select Character: 选择字符: Font: 字体: Character Class: 字符类: &Insert &I 插入 C&lear &L 清除 &Close &C 关闭 Insert the characters at the cursor in the text 在文本的光标处插入字符 Delete the current selection(s). 删除当前选择 Close this dialog and return to text editing. 关闭对话窗并返回到文本编辑。 Full Character Set 完全字符集 Basic Latin 基本拉丁 Latin-1 Supplement 拉丁-1 附录 Latin Extended-A 拉丁扩展-A Latin Extended-B 拉丁扩展-B General Punctuation 常规标点符号 Super- and Subscripts 上标和下标 Currency Symbols 货币符号 Letterlike Symbols 类似字母符号 Number Forms 数字形式 Arrows 箭头 Mathematical Operators 数学运算符 Box Drawing 方盒绘图 Block Elements 区块元素 Geometric Shapes 几何图形 Miscellaneous Symbols 各种符号 Dingbats 装饰符 Small Form Variants 小形状变体 Ligatures 连字 Specials 特别符号 Greek 希腊字符 Greek Extended 扩展希腊字符 Cyrillic 斯拉夫字符 Cyrillic Supplement 斯拉夫字符附录 Arabic 阿拉伯字符 Arabic Extended A 阿拉伯字符扩展 A Arabic Extended B 阿拉伯字符扩展 B Hebrew 希伯来字符 CheckDocument Glyphs missing 符号丢失 Text overflow 文本溢出 Object is not on a Page 对象不在页面上 Missing Image 图像丢失 Image has a DPI-Value less than %1 DPI 图像的DPI-值低于 %1 DPI Object has transparency 对象有透明 Object is a PDF Annotation or Field 对象是一个PDF注释或域 Object is a placed PDF 对象是个嵌入的PDF Document 文档 No Problems found 没发现问题 Page Free Objects 自由对象 Problems found 发现问题 Preflight Verifier 印前检验器 Items 项目 Problems 问题 Current Profile: 当前配置文件: &Ignore Errors &I 忽略错误 ChooseStyles Choose Styles 选择样式 Available Styles 可用样式 CollectForOutput Choose a Directory 选择一个目录 Collecting... 收集中... Warning 警告 Cannot collect all files for output for file: %1 不能收集所有文件来输出文件: %1 Cannot collect the file: %1 不能收集文件: %1 ColorListBox None ColorManager Colors &Import &New &Edit D&uplicate &Delete &Remove Unused &R 清除未用的 Color Sets 颜色组合 Current Color Set: 当前颜色组合 &Save Color Set &S 保存颜色组合 Choose a color set to load 选择要载入的颜色组合 Save the current color set 保存当前颜色组合 Remove unused colors from current document's color set 从当前文档颜色组合清除未用颜色 Import colors to the current set from an existing document 从现存文档中导入颜色组合到当前组合 Create a new color within the current set Edit the currently selected color Make a copy of the currently selected color Delete the currently selected color Make the current colorset the default color set &Name: Choose a Name Open Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) Copy of %1 Copy %1 New Color 新颜色 ColorWheel Monochromatic 单色的 Analogous 相似的 Complementary 补充的 Split Complementary 拆分补充的 Triadic 三合一的 Tetradic (Double Complementary) 四分的(双补充的) Base Color 基本颜色 Monochromatic Light 单色亮 Monochromatic Dark 单色暗 1st. Analogous 第一个相似的 2nd. Analogous 第二个相似的 1st. Split 第一个拆分 2nd. Split 第二个拆分 3rd. Split 第三个拆分 4th. Split 第四个拆分 1st. Triadic 1st. Triadic 2nd. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) 3rd. Tetradic (angle opposite) ColorWheelDialog Color Wheel 颜色转盘 Color 颜色 Name 名称 C C M M Y Y K K Select Method: 选择方式: Angle (0 - 90 degrees): 角度 (0 - 90 度): &Merge Colors &M 混合颜色 &Replace Colors &R 替代颜色 Merge created colors into the document colors Merge created colours into the document colours Replace created colors in the document colors Replace created colours in the document colours Leave colors untouched Leave colours untouched Merging colors Merging colours Error: Error: Now opening the color manager. Now opening the colour manager. Color Merging Colour Merging Normal Vision Normal Vision Full Color Blindness Full Colour Blindness Vision Defect: Vision Defect: Cr&eate color... Cr&eate colour... &Import existing color... &Import existing colour... &Merge colors &Merge colours &Replace colors &Replace colours E&xit E&xit C&olor C&olour New Color New Colour Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Click the wheel to get the base color. It is hue in HSV mode. Click the wheel to get the base colour. It is hue in HSV mode. Sample color scheme Sample colour scheme Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Colors of your chosen color scheme 你所选颜色组合的颜色 Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Color %1 exists already! Colour %1 exists already! Color %1 appended. 颜色 %1 被追加。 C&olor Components... C&olour Components... Protanopia (Red) Protanopia (Red) Deuteranopia (Green) Deuteranopia (Green) Tritanopia (Blue) Tritanopia (Blue) ColorWheelPlugin &Color Wheel... &C 颜色转盘... Color setting helper Colour setting helper Color selector with color theory included. Colour selector with colour theory included. CommonStrings &Apply &A 应用 &Cancel &C 取消 None &OK &O 确认 &Save &S 保存 Warning 警告 Cpalette Normal 普通 Horizontal Gradient Horizontal Gradient Vertical Gradient Vertical Gradient Diagonal Gradient Diagonal Gradient Cross Diagonal Gradient Cross Diagonal Gradient Radial Gradient Radial Gradient Opacity: Opacity: % % None None Shade: Shade: Edit Line Color Properties Edit Line Colour Properties Edit Fill Color Properties Edit Fill Colour Properties Saturation of color Saturation of colour Normal or gradient fill method Normal or gradient fill method Set the transparency for the color selected Set the transparency for the colour selected Free linear Gradient Free linear Gradient Free radial Gradient Free radial Gradient X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: Move Vector Move Vector Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed CsvDialog CSV Importer Options CSV Importer Options Field delimiter: Field delimiter: (TAB) (TAB) Value delimiter: Value delimiter: First row is a header First row is a header OK OK Cancel Cancel None None CupsOptions Printer Options 打印机选项 Option 选项 Value 数值 Page Set 页面套 All Pages 全部页面 Even Pages only 偶数页 Odd Pages only 奇数页 Mirror 镜像 No Yes Orientation 页面方向 Portrait 竖式 Landscape 横式 N-Up Printing N-Up 打印 Page per Sheet Page per Sheet Pages per Sheet Pages per Sheet This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CustomFDialog Encoding: 编码: Moves to your Document Directory. This can be set in the Preferences. 移动到你的文档目录。这个可以在首选项里设定。 &Compress File &C 压缩文件 &Include Fonts &I 包括字体 CwSetColor Set Color Components 设置颜色组成 CMYK CMYK RGB RGB HSV HSV H: H: S: S: V: V: R: R: G: G: B: B: C: C: M: M: Y: Y: K: K: Set &RGB Set &RGB Set C&MYK Set C&MYK Set &HSV Set &HSV DeferredTask Cancelled by user 被用户取消 DelColor Delete Color 删除颜色 None Delete Color: 删除颜色: Replace With: 替换上: DelPages Delete Pages 删除页 to: 到: Delete From: 删除来自: DelStyle Delete Style 删除样式 Delete Style: 删除样式: Replace With: 替换上: No Style 没有样式 DocInfos Document Information 文档信息 &Title: &T 标题: &Author: &A 作者: &Keywords: &K 关键词: Descri&ption: &P 描述: P&ublisher: &U 出版人: &Contributors: &C 贡献者: Dat&e: &E 日期: T&ype: &Y 类型: F&ormat: &O 格式: Identi&fier: &F 身份标记 &Source: &S 来源: &Language: &L 语言: &Relation: &R 关系: Co&verage: &V 范围: Ri&ghts: &G 权利: Further &Information &I 进一步信息 A person or organisation responsible for making the document available 负责制作该文档的一个人或组织 A person or organisation responsible for making contributions to the content of the document 负责为该文档内容作出贡献的一个人或组织 A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 一个和文档存在时的某事件相关联的日期,以ISO 8601标准表示,格式是年-月-日 The nature or genre of the content of the document, eg. categories, functions, genres, etc 文档内容的性质或流派,例如类别,功能或流派等等 An unambiguous reference to the document within a given context such as ISBN or URI 一个在特定的上下文里对文档的清晰参考,例如ISBN或URI A reference to a document from which the present document is derived, eg. ISBN or URI 一个关于当前文档怎么起源的参考,例如ISBN或URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI 一个关于相关文档的参考,兴许使用一个正式的身份标记,例如ISBN或者URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges 文档内容的区域或者范围,可能的话包括地点,时间和管辖范围 Information about rights held in and over the document, eg. copyright, patent or trademark 关于在文档里或对文档拥有的权力,例如版权,专利或者商标 Documen&t &T 文档 The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 制作此文档内容的主要人或组织。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。 A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 赋予文档的名称。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。 An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export 文档内容的说明。这个项目是文档的简单描述或者摘要。这个在输出PDF文档时将被嵌入 The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files 文档内容的主题。这个项目是你想嵌入到PDF文档中的关键词,以便帮助查找和检索PDF文档 The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here 文档的物理或数码的证明。媒体类型或者尺寸将值得关注。RFC2045,RFC2046在此也有用 The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH 书写文档内容所用的语言,一般上是可能带横杠后缀和一个ISO-3166国家代码(如en-GB,fr-CH)的ISO-639语言编码 DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. 添加一个页码区域到文档。这个新区域将被添加到当前选中的区域后面 Delete the currently selected section. 删除当前选中的区域 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Name: Optional name for section eg. Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. 名称:区域的可选名称,例如:Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. DocSectionsBase Document Sections 文档区域 Name 名称 From 来自 To To Style 样式 Start 开始 &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D Shown 显示 DocumentItemAttributes None Relates To 相关于 Is Parent Of 父级于 Is Child Of 子级于 Text Frames 文本框 Image Frames 图片框 Boolean 布尔型 Integer 整数 String 字串 Real Number DocumentItemAttributesBase Document Item Attributes 文档项目属性 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To 有关系于 Auto Add To 自动添加到 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L Druck Setup Printer 设置打印机 File 文件 Options 选项 All 全部 Save as 保存为 Cyan Magenta 洋红 Yellow Black Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一个以逗号隔开的记号列表,这里一个记号可以以*来代表所有页,1-5代表页的范围,或者单独一个页码 Print Destination 打印到 &Options... &O 选项... &File: &F 文件: C&hange... &H 更改... A&lternative Printer Command &L 另外的打印机命令 Co&mmand: &M 命令: Range 范围 Print &All &A 全部打印 Print Current Pa&ge &G 打印当前页 Print &Range &R 打印范围 N&umber of Copies: &U 打印份数: &Print &P 打印 Print Normal 普通打印 Print Separations 分色打印 Print in Color if Available 尽量用彩色打印 Print in Grayscale 灰度打印 PostScript Level 1 PostScript 级别 1 PostScript Level 2 PostScript 级别 2 PostScript Level 3 PostScript 级别 3 Page Mirror Page(s) Horizontal 页水平镜像 Mirror Page(s) Vertical 页垂直镜像 Set Media Size 设置介质尺寸 Color 颜色 Apply Under Color Removal 应用底色清除 Convert Spot Colors to Process Colors 把Spot Colours 转成 Process Colours Apply ICC Profiles 应用ICC配置文件 Advanced Options 高级选项 Preview... 预览... Sets the PostScript Level. Setting to Level 1 or 2 can create huge files 设置PostScript 级别. 设置成级别 1或2可能生成巨大文件 PostScript Files (*.ps);;All Files (*) PostScript 文件 (*.ps);;全部文件 (*) Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options 使用其他打印管理器来使用额外的打印选项,例如kprinter或者gtklp A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. Allows you to embed ICC profiles in the print stream when color management is enabled Allows you to embed ICC profiles in the print stream when colour management is enabled This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Failed to retrieve printer settings EPSPlug Importing File: %1 failed! 导入文件: %1 失败! Fatal Error 致命错误 EditStyle Edit Style 编辑样式 Character 字符 pt pt None Line Spacing 行距 Name of your paragraph style Name of your paragraph style Font of selected text or object 所选文本或对象的字体 Font Size 字体大小 Color of text fill 文本填充颜色 Color of text stroke 文本轮廓颜色 Determines the overall height, in line numbers, of the Drop Caps Determines the overall height, in line numbers, of the Drop Caps Spacing above the paragraph 段落上方的距离 Spacing below the paragraph 段落下方的距离 Tabulators and Indentation 制表符和缩进 &Name: &N 名称: &Lines: &L 行: % % Distances 距离 Fixed Linespacing 固定行距 Automatic Linespacing 自动行距 Align to Baseline Grid 和基线网格对齐 Drop Caps 首字下沉 Distance from Text: 到文本距离: Preview of the Paragraph Style 预览段落样式 Determines the gap between the DropCaps and the Text 确定下沉字和文本的间隔 Toggles sample text of this paragraph style 切换这个段落样式的文本范例 Name of the style is not unique 这个样式的名称非唯一 Background 背景 Editor Editor &New &N 新建 &Open... &O 打开... Save &As... &A 另存为... &Save and Exit &S 保存并退出 &Exit without Saving &E 不保存退出 &Undo &U 撤销动作 &Redo &R 重复动作 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 C&lear &L 清除 &Get Field Names &G 获取域名称 &File &F 文件 &Edit &E 编辑 JavaScripts (*.js);;All Files (*) JavaScripts (*.js);;全部文件 (*) EffectsDialog Image Effects 图像效果 Options: 选项: Color: 颜色: Shade: 阴影: Brightness: 亮度: Contrast: 对比: Radius: 半径: Value: 数值: Posterize: 海报效果化: Available Effects 可用效果 Blur 模糊 Brightness 亮度 Colorize 颜色化 Contrast 对比 Grayscale 灰度 Invert 反转 Posterize 海报效果化 Sharpen 锐化 >> >> << << Effects in use 使用中效果 OK 确认 Cancel 取消 ExportForm &All pages &A 全部页 Change the output directory 更改输出目录 The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' 输出目录-保存你的图像的地方。输出文件的名称将会是 '文件名-页码.文件类型' Export only the current page 仅导出当前页 Available export formats 可用导出格式 Choose a Export Directory 选择一个导出目录 C&hange... &H 更改... &Export to Directory: &E 导出到目录: Image &Type: &T 图像类型: &Quality: &Q 质量: Export as Image(s) 作为图像导出 Options 选项 &Resolution: &R 分辨率: % % dpi dpi Range 范围 &Current page &C 当前页 &Range &R 范围 C C Export a range of pages 导出一个页面范围 Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一个以逗号隔开的记号,这里记号可以是*以代表所有页,1-5代表页范围或者一个单独的页码。 Export all pages 输出所有页 Resolution of the Images Use 72 dpi for Images intended for the Screen 图像的分辨率。 如果图像用于屏幕显示,用72 dpi The quality of your images - 100% is the best, 1% the lowest quality 图像的质量-100%为最好,1%为最低质量 &Size: &S 尺寸 Size of the images. 100% for no changes, 200% for two times larger etc. 图像尺寸。100%为没有更改,200%是两倍大,以此类推 ExtImageProps Extended Image Properties 图像扩展属性 Normal 普通 Darken 更暗 Lighten 更亮 Hue 色调 Saturation 饱和度 Color 颜色 Luminosity 亮度 Multiply 倍增 Screen 屏幕 Dissolve 溶解 Overlay 重叠 Hard Light 强光 Soft Light 柔光 Difference 差分 Exlusion 排除 Color Dodge 颜色模糊 Color Burn 颜色焦灼 Blend Mode: 混合模式: Opacity: 透明度: % % Name 名称 Background 背景 Layers 图层 Don't use any Path 不用任何路径 Paths 路径 Exclusion 排除 FDialogPreview Size: 尺寸 Title: 标题: No Title 无标题 Author: 作者 Unknown 未知 Scribus Document Scribus文档 Resolution: 分辨率 DPI DPI RGB RGB CMYK CMYK Grayscale 灰度 Colorspace: 颜色模式: FileLoader Some fonts used by this document have been substituted: 这个文件使用的一些字体被替代为: was replaced by: 已被替代成: FontPrefs Available Fonts 可用字体 Font Substitutions 字体替代 Additional Paths 其他路径 Font Name 字体名称 Replacement 替代 Choose a Directory 选择一个目录 &Available Fonts &A 可用字体 Font &Substitutions &S 字体替代 Additional &Paths &P 其他路径 &Delete &D 删除 C&hange... &H 更改... A&dd... &D 添加... &Remove &R 移除 Font Name font preview 字体名称 Use Font font preview 使用字体 Embed in: font preview 嵌入在: Subset font preview 子集 Path to Font File font preview 字体文件的路径 PostScript PostScript Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. 字体搜索路径只能在首选项中设定,而且要在没有打开任何文档的情况下。关闭所有文档,然后用编辑-设置来更改字体搜索路径。 FontPreview Font Name font preview 字体名称 Doc font preview 文件 Type font preview 类型 Subset font preview 子集 Access font preview Access Font Size: 字体尺寸: Fonts Preview font preview 字体预览 Alt+O font preview Alt+O Quick Search: 快速查找: &Search &S 查找 &Close font preview &C 关闭 Alt+C font preview Alt+C Append selected font into Style, Font menu font preview 追加选中的字体到样式,字体菜单 Leave preview font preview Leave 预览 Typing the text here provides quick searching in the font names. E.g. 'bold' shows all fonts with Bold in name. Searching is case insensitive. 在此输入字以便快速查找字体名称。例如'粗体'显示所带有粗体的名称。查找大小写有别 Start searching 开始查找 Size of the selected font 所选字体的尺寸 Woven silk pyjamas exchanged for blue quartz font preview Woven silk pyjamas exchanged for blue quartz User font preview 用户 System font preview 系统 &Append &A 追加 FontPreviewPlugin &Font Preview... &F 字体预览... Font Preview dialog 字体预览窗口 Sorting, searching and browsing available fonts. 排列,查找和浏览可用的字体。 FontReplaceDialog Font Substitution 字体替代 Original Font 原始字体 Substitution Font 替代字体 Make these substitutions permanent 让这些替代永久有效 This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. 这个文档包括一些你的系统没有安装的字体,请为它们选择合适的替代字体。按取消将停止载入文档。 Cancels these font substitutions and stops loading the document. 取消这些字体替代并停止载入文档。 Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. 启用这个就告诉Scribus永久性地在以后的版面使用替代字体来代替不存在的字体。这个可以在编辑-首选项-字体中被改变或逆转。 If you select OK, then save, these substitutions are made permanent in the document. 如果你选择确认然后保存,这些替代将永久保留到文档中。 GradientEditor Position: 位置: % % Here you can add, change or remove Color-Stops. 这里你可以增加,更改或者删除颜色节点 GuideManager Manage Guides 管理参考线 Horizontal Guides 水平参考线 Vertical Guides 垂直参考线 &Y-Pos: &Y-坐标: &Add &A 添加 D&elete &E 删除 &X-Pos: &X-坐标: A&dd &D 添加 De&lete &L 删除 &Lock Guides &L 锁定参考线 &Rows: &R 行: C&olumns: &O 列: Refer to: 参考: &Page &P 页 &Margins &M 页边距 &Selection &S 选择 &Close &C 关闭 Rows and Columns - Automatic Guides 行和列-自动参考线 Row &Gap &G 行距 Colum&n Gap &N 列距 &Update &U 更新 Set the guides in document. Guide manager is still opened but the changes are persistant guide manager 在文档设置参考线。参考线管理器还是打开状态,但是更改是延续的 &Apply to All Pages &A 应用到所有页面 Guide 参考线 Unit Preview 预览 There is empty (0.0) guide already 已经有空白的(0.0)参考线 HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. 对不起,没有使用手册可用!请访问: http://docs.scribus.net 来获得最新文档,如果要下载,请访问 www.scribus.net 。 Contents 内容 Link 链接 Scribus Online Help Scribus在线帮助 &Contents &C 内容 &Search &S 查找 unknown 未知 Find 查找 Search Term: 查找条件: Se&arch &A 查找 &New &N 新建 &Delete &D 删除 De&lete All &L 全部删除 Book&marks &M 书签 &Print... &P 打印... E&xit &X 退出 Searching is case unsensitive 查找大小写有别 New Bookmark 新书签 New Bookmark's Title: 新书签标题: &File &F 文件 &Find... &F 查找... Find &Next &N 查找下一个 Find &Previous &P 查找上一个 &Edit &E 编辑 &Add Bookmark &A 添加书签 D&elete All &E 全部删除 &Bookmarks &B 书签 HyAsk Possible Hyphenation 可能连字符 Accept 接受 Skip 跳过 Cancel 取消 HySettings Length of the smallest word to be hyphenated. 需要用连字符的最小的词的长度。 Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. &Language: &L 语言: &Smallest Word: &S 最小字: &Hyphenation Suggestions &H 连字符提示 Hyphenate Text Automatically &During Typing &D 输入时自动添加连字符到文本 A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Enables automatic hyphenation of your text while typing. 启用在输入时自动用连字符 Consecutive Hyphenations &Allowed: &A 允许连续连字符: ImageInfoDialog Image Info 图片信息 General Info 常规信息 Date / Time: 日期/时间: Has Embedded Profile: 已经嵌入配置文件: Yes No Profile Name: 配置文件名称: Has Embedded Paths: 已经嵌入路径: Has Layers: 有图层: EXIF Info EXIF信息 Artist: 作者: Comment: 说明: User Comment: 用户说明: Camera Model: 相机型号: Camera Manufacturer: 相机厂家: Description: 描述: Copyright: 版权: Scanner Model: 扫描仪型号: Scanner Manufacturer: 扫描仪厂家 ImportPSPlugin Import &EPS/PS... &E 导入EPS/PS... Imports EPS Files 导入EPS文件 Imports most EPS files into the current document, converting their vector data into Scribus objects. 导入大部分EPS文件到当前文档, 把它们的矢量数据转换为Scribus对象 PostScript PostScript InsPage Insert Page 插入页面 before Page 页之前 after Page 页之后 at End 最后 Normal 普通 Page(s) 页面 &Insert &I 插入 &Master Page: &M 母页: Page Size 页面尺寸 &Size: &S 尺寸: Custom 自定义 Orie&ntation: &N 文档方向: Portrait 竖式 Landscape 横式 &Width: &W 宽度: &Height: &H 高度: Move Objects with their Page 对象和它们的页一起移动 Master Pages 母页 InsertTable Insert Table 插入表格 Number of rows: 行数: Number of columns: 列数: JavaDocs New Script 新脚本 Edit JavaScripts 编辑JavaScripts &Edit... &E 编辑... &Add... &A 添加... &Delete &D 删除 &Close &C 关闭 &New Script: &N 新脚本: &No &N 否 &Yes &Y 是 Do you really want to delete this script? 你真的要删除这个脚本吗? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. 添加一个新脚本,预设了一个同名称的函数。如果你想把这个脚本作为一个“打开动作”脚本来用,确保没有更改函数的名称 KeyManager Action 动作 Current Key 当前键位 Select a Key for this Action 为这个动作选择一个键位 ALT+SHIFT+T ALT+SHIFT+T Alt Alt Ctrl Ctrl Shift Shift Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ &No Key &N 没键 &User Defined Key &U 用户自定义键 Set &Key &K 设置键 Loadable Shortcut Sets 可载入快捷键组合 &Load &L 载入 &Import... &I 导入... &Export... &E 导出... &Reset &R 重置 Keyboard shortcut sets available to load 可载入快捷键组合 Load the selected shortcut set 载入选中的快捷键组合 Import a shortcut set into the current configuration 导入一个快捷键组合到当前配置中 Export the current shortcuts into an importable file 导出当前快捷键到一个可被导入的文件中 Reload the default Scribus shortcuts 重新载入默认的Scribus快捷键 Key Set XML Files (*.ksxml) 键位组合 XML 文件 (*.ksxml) This key sequence is already in use 这个键位组合已经被使用 Meta Meta Meta+ Meta+ LayerPalette Layers 图层 Delete Layer 删除图层 Name 名称 Do you want to delete all objects on this layer too? 你确信一并删除此图层上的所有对象吗? Add a new layer 添加图层 Delete layer 删除图层 Raise layer 升高图层 Lower layer 降低图层 LineFormate Edit Line Styles 编辑线条样式 Copy of %1 Copy of %1 New Style 新样式 Open 打开 Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文件 (*.sla *.sla.gz *.scd *.scd.gz);;所有文件 (*) Documents (*.sla *.scd);;All Files (*) 文件 (*.sla *.scd);;所有文件 (*) &New &N 新建 &Edit &E 编辑 D&uplicate &U 复制 &Delete &D 删除 &Save &S 保存 &No &N 否 &Yes &Y 是 &Import &I 导入 Do you really want to delete this style? 你真的要删除此样式吗? LoadSavePlugin All Files (*) 所有文件 (*) LoremManager Select Lorem Ipsum 选择范例文本 Author: 作者: Get More: 获得更多: XML File: XML 文件: Lorem Ipsum 范例文本 Paragraphs: 段落: Alt+O Alt+O Alt+C Alt+C MarginDialog Margin Guides 页边距参考线 Manage Page Properties 管理页属性 Page Size 页面尺寸 &Size: &S 尺寸: Custom 自定义 Orie&ntation: &N 页面方向 Portrait 竖式 Landscape 横式 &Width: &W 宽度: &Height: &H 高度: Move Objects with their Page 把对象和页一起移动 Type: 类型: MarginWidget &Bottom: &B 底部: &Top: &T 顶部: &Right: &R 右边: &Left: &L 左边: Distance between the top margin guide and the edge of the page 顶部边距线到页边的距离 Distance between the bottom margin guide and the edge of the page 底部边距线到页边的距离 &Inside: &I 里面: O&utside: &U 外面: Preset Layouts: 预设版面: Apply margin settings to all pages 应用页边距设置到所有页面 Apply the margin changes to all existing pages in the document 应用页边距设置到文档中现存的所有页面 Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 左边页边距线到页边的距离。如果对面页被选择,这个距离可以用来获得正确的装订边距。 Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 右边页边距线到页边的距离。如果对面页被选择,这个距离可以用来获得正确的装订边距。 MasterPagesPalette Edit Master Pages 编辑母页 Do you really want to delete this master page? 你确认要删除这个母页吗? &No &N 否 &Yes &Y 是 &Name: &N 名称: New Master Page 新建母页 Copy of %1 Copy of %1 Name: 名称: New MasterPage 新建母页 Copy #%1 of Copy #%1 of Normal 普通 Duplicate the selected master page 复制当前选中的母页 Delete the selected master page 删除当前选中的母页 Add a new master page 增加一个新的母页 Import master pages from another document 从另外一个文件导入母页 New Master Page %1 Mdup Multiple Duplicate 多重复制 &Number of Copies: &N 复件数: &Horizontal Shift: &H 水平提升: &Vertical Shift: &V 垂直提升: Measurements Distances 距离 X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: 角度: Length: 长度: pt pt MergeDoc Open 打开 Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) Import Page(s) 输入页 from 0 来自 0 Create Page(s) 创建页 from %1 来自 %1 Import Master Page 导入母页 &From Document: &F 来自文档: Chan&ge... &G 更改... &Import Page(s): &I 导入页: &Import Master Page &I 导入母页 Before Page 页之前 After Page 页之后 At End 最后 &Import &I 导入 Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入野鸽以逗号隔开的标记,这里一个记号可以是*来表示全部也,1-5表示页范围,或者输入单个页码。 MissingFont Missing Font 丢失字体 The Font %1 is not installed. 字体 %1 没有安装。 Use 使用 instead 代以 MovePages Move Pages 移动页 Copy Page 复制页 Move Page(s): 移动页: Move Page(s) 移动页 Before Page 页之前 After Page 页之后 At End 最后 To: 到: Number of copies: 复件数量: Mpalette Properties 属性 Name 名称 Geometry 排列 pt pt Basepoint: 基点 Level 高低 Shape: 形状: Distance of Text 文本距离 Show Curve 显示曲线 Start Offset: 开始位移: Distance from Curve: 到曲线的距离: % % Input Profile: 输入配置文件: Rendering Intent: 渲染意图: Perceptual 知觉 Relative Colorimetric 相对比色 Saturation 饱和度 Absolute Colorimetric 绝对比色 Left Point 左点 End Points 尾点 Miter Join 尖角连接 Bevel Join 斜角连接 Round Join 圆角连接 Flat Cap 平头 Square Cap 方头 Round Cap 圆头 No Style 没有样式 Font Size 字体大小 Line Spacing 行距 None Name of selected object 所选对象名称 Horizontal position of current basepoint 当前基点的水平位置 Vertical position of current basepoint 当前基点的垂直位置 Width 宽度 Height 高度 Rotation of object at current basepoint 在当前基点旋转对象 Point from which measurements or rotation angles are referenced 表示尺寸和旋转角度的点 Select top left for basepoint 选择左上为基点 Select top right for basepoint 选择右上为基点 Select bottom left for basepoint 选择左下为基点 Select bottom right for basepoint 选择右下为基点 Select center for basepoint 选择中间为基点 Flip Horizontal 水平翻转 Flip Vertical 垂直翻转 Move one level up 上升一级 Move one level down 下降一级 Move to front 移到最上面 Move to back 移到最下面 Lock or unlock the object 锁定或解锁对象 Lock or unlock the size of the object 锁定或者解锁对象的尺寸 Enable or disable printing of the object 启用或者禁用对象的打印 Font of selected text or object 选中的文本或者对象的字体 Scaling width of characters 字符宽度缩放 Saturation of color of text stroke 文本轮廓颜色的饱和度 Saturation of color of text fill 文本填充色的饱和度 Style of current paragraph 当前段落的样式 Change settings for left or end points 更改左或尾点的设置 Pattern of line 线条样式 Thickness of line 线条粗细 Type of line joins 线条类型 Type of line end 线条端类型 Line style of current object Line style of current object Choose the shape of frame... Choose the shape of frame... Edit shape of the frame... Edit shape of the frame... Set radius of corner rounding Set radius of corner rounding Number of columns in text frame Number of columns in text frame Distance between columns Distance between columns Distance of text from top of frame Distance of text from top of frame Distance of text from bottom of frame Distance of text from bottom of frame Distance of text from left of frame Distance of text from left of frame Distance of text from right of frame Distance of text from right of frame Edit tab settings of text frame... Edit tab settings of text frame... Allow the image to be a different size to the frame Allow the image to be a different size to the frame Horizontal offset of image within frame Horizontal offset of image within frame Vertical offset of image within frame Vertical offset of image within frame Resize the image horizontally Resize the image horizontally Resize the image vertically Resize the image vertically Keep the X and Y scaling the same Keep the X and Y scaling the same Make the image fit within the size of the frame Make the image fit within the size of the frame Use image proportions rather than those of the frame Use image proportions rather than those of the frame Cell Lines Cell Lines Line at Top Line at Top Line at the Left Line at the Left Line at the Right Line at the Right Line at Bottom Line at Bottom Keep the aspect ratio Keep the aspect ratio Source profile of the image Source profile of the image Rendering intent for the image Rendering intent for the image Path Text Properties Path Text Properties Indicates the level the object is on, 0 means the object is at the bottom Indicates the level the object is on, 0 means the object is at the bottom Make text in lower frames flow around the object shape Make text in lower frames flow around the object shape Switches between Gap or Column width Switches between Gap or Column width Column width 列宽 X, Y, &Z X, Y, &Z &Shape &S 形状 &Text &T 文本 &Image &I 图像 &Line &L 线条 &Colors &C 颜色 &X-Pos: &X-坐标: &Y-Pos: &Y-坐标: &Width: &W 宽度: &Height: &H 高度: &Rotation: &R 旋转: &Edit Shape... &E 编辑形状... R&ound Corners: &O 圆角 Colu&mns: &M 列: &Gap: &G 间距: To&p: &P 顶: &Bottom: &B 底: &Left: &L 左: &Right: &R 右: T&abulators... &A 制表符... Text &Flows Around Frame &F 字体环绕框 Use &Bounding Box &B 使用限制方框 &Use Contour Line &U 使用轮廓线条 St&yle: &Y 样式: Lan&guage: &G 语言: &Free Scaling &F 自由缩放 X-Sc&ale: X-&A 缩放: Y-Scal&e: Y-&E 缩放: Scale &To Frame Size &T 缩放到框体大小 P&roportional &R 按比例 &Basepoint: &B 基点: T&ype of Line: &Y 线条类型: Line &Width: &W 线宽: Ed&ges: d&G 边缘: &Endings: &E 结尾: &X1: &X1: X&2: X&2: Y&1: Y&1: &Y2: &Y2: Use a surrounding box instead of the frame's shape for text flow Use a surrounding box instead of the frame's shape for text flow Use a second line originally based on the frame's shape for text flow Use a second line originally based on the frame's shape for text flow Hyphenation language of frame 框里连字符语言 Right to Left Writing 右到左书写 Manual Tracking 手工追踪 Start Arrow: 箭头: End Arrow: 箭尾: Offset to baseline of characters 字符底线位移 Scaling height of characters 字符高度缩放 Fixed Linespacing 固定行距 Automatic Linespacing 自动行距 Align to Baseline Grid 与底线网格对齐 Actual X-DPI: 实际 X-DPI: Actual Y-DPI: 实际 Y-DPI: Name "%1" isn't unique.<br/>Please choose another. Name "%1" isn't unique.<br/>Please choose another. Color of text stroke. Only available with "outline" text decoration. Colour of text stroke. Only available with "outline" text decoration. Color of text fill. Only available with "outline" text decoration. Colour of text fill. Only available with "outline" text decoration. MultiLine Edit Style 编辑样式 Flat Cap Flat Cap Square Cap Square Cap Round Cap Round Cap Miter Join Mitre Join Bevel Join Bevel Join Round Join Round Join Line Width: Line Width: pt pt % % OK OK pt pt Solid Line 实线 Dashed Line 虚线 Dotted Line 点线 Dash Dot Line 虚点线 Dash Dot Dot Line 虚点点线 Name "%1" isn't unique.<br/>Please choose another. 名称 "%1" 不唯一。<br/>请选择另外一个 MultiProgressDialogBase Progress 进度 Overall Progress: 总进度 &Cancel &C 取消 MyPlugin My &Plugin &P 我的插件 MyPluginImpl Scribus - My Plugin Scribus-我的插件 The plugin worked! 插件可工作! NewDoc New Document 新建文档 Page Size 页面大小 Portrait 竖式 Landscape 横式 Margin Guides 页边距参考线 Options 选项 Document page size, either a standard size or a custom size 文档的页面大小,或是标准尺寸或者是自定义尺寸 Orientation of the document's pages 文档页面的方向 Width of the document's pages, editable if you have chosen a custom page size 文档的页面宽度,如果你选择了一个自定义的页面尺寸,它是可以编辑的 Height of the document's pages, editable if you have chosen a custom page size 文档的页面高度,如果你选择了一个自定义的页面尺寸,它是可以编辑的 First page number of the document 文档的起始页码 Default unit of measurement for document editing 文档编辑默认所使用的尺寸单位 Create text frames automatically when new pages are added 当新页被添加时自动创建文本框 Distance between automatically created columns 自动创建的列的列距 Number of columns to create in automatically created text frames 自动创建的文本框里的列数 &Size: &S 尺寸: Orie&ntation: &N 页面方向: &Width: &W 宽度: &Height: &H 高度: F&irst Page Number: &I 起始页码: &Default Unit: &D 默认单位: &Automatic Text Frames &A 自动文本框 &Gap: &G 间隔: Colu&mns: &M 列: Do not show this dialog again 不再显示此对话 Initial number of pages of the document 文档起始页数 N&umber of Pages: &U 页数: Open 打开 &New Document &N 新建文档 Open &Existing Document &E 打开现有文档 Open Recent &Document &D 打开最近文档 NewFromTemplatePlugin New &from Template... &F 从模板新建... Load documents with predefined layout 以预设的版面载入文档 Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). 从一个别人或自己创建的模板中开创文档。(例如,如果你的文档有固定的样式) NodePalette Nodes 节点 Move Nodes 移动节点 Move Control Points 移动控制点 Add Nodes 添加节点 Delete Nodes 删除节点 Reset Control Points 重置控制点 Reset this Control Point 重置这个节点 &Absolute Coordinates &A 绝对坐标 &X-Pos: &X-坐标: &Y-Pos: &Y-坐标: Edit &Contour Line &C 编辑轮廓线 &Reset Contour Line &R 重置轮廓线 &End Editing &E 结束编辑 Move Control Points Independently 独立移动控制点 Move Control Points Symmetrical 对称移动控制点 Open a Polygon or Cuts a Bezier Curve 打开一个多边形或剪切齐贝尔曲线 Close this Bezier Curve 闭合这个齐贝尔曲线 Mirror the Path Horizontally 水平镜像路径 Mirror the Path Vertically 垂直镜像路径 Shear the Path Horizontally to the Left 向左水平切变路径 Shear the Path Vertically Up 向上垂直切变路径 Shear the Path Vertically Down 向下垂直切变路径 Rotate the Path Counter-Clockwise 逆时针旋转路径 Rotate the Path Clockwise 顺时针旋转路径 Reduce the Size of the Path by shown % 按所示减少路径尺寸 % Enlarge the Size of the Path by shown % 按所示增加路径尺寸 % Angle of Rotation 旋转角度 % to Enlarge or Reduce By % 来增加或减少 Activate Contour Line Editing Mode 激活轮廓线条编辑模式 Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. OODrawImportPlugin Import &OpenOffice.org Draw... &O 导入OpenOffice.org Draw... Imports OpenOffice.org Draw Files 导入OpenOffice.org Draw文件 Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw OdtDialog Use document name as a prefix for paragraph styles 用文档名称作为段落样式的前缀 Do not ask again 下次不问 OK 确认 Enabling this will overwrite existing styles in the current Scribus document 启用这个将覆盖当前Scribus中的现存样式 Merge Paragraph Styles 合并段落样式 Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Prepend the document name to the paragraph style name in Scribus. Prepend the document name to the paragraph style name in Scribus. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Overwrite Paragraph Styles 覆盖段落样式 OpenDocument Importer Options OpenDocument导入器选项 Cancel 取消 OldScribusFormat Scribus Document Scribus文档 Scribus 1.2.x Document Scribus 1.2.x文档 OutlineValues % % Linewidth 线宽 PDFExportDialog Save as PDF 另存为PDF O&utput to File: & U 输出文件: Cha&nge... & N 更改: Output one file for eac&h page & H 逐页输出单个文件 &Save &S 保存 Save as 另存为 PDF Files (*.pdf);;All Files (*) PDF文件 (*.pdf);;全部文件 (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. PDFlib Saving PDF 保存PDF中 Exporting Master Pages: 输出母页: Exporting Pages: 输出页: Exporting Items on Current Page: 输出当前页里的项目: PPreview Print Preview 打印预览 All 全部 Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later 显示文档中的透明度和透明项目。需要Ghostscript 7.07或更高 Gives a print preview using simulations of generic CMYK inks, instead of RGB colors 不用RGB颜色而以CMYK墨水来模拟打印预览 Enable/disable the C (Cyan) ink plate 启用/停用 C (青)墨水板 Enable/disable the M (Magenta) ink plate 启用/停用 M (洋红)墨水板 Enable/disable the Y (Yellow) ink plate 启用/停用 Y (黄)墨水板 Enable/disable the K (Black) ink plate 启用/停用 K (黑)墨水板 Anti-alias &Text &T 反锯齿文本 Anti-alias &Graphics &T 反锯齿图像 Display Trans&parency &P 显示透明度 &Display CMYK &D 显示CMYK &C &C &M &M &Y &Y &K &K &Under Color Removal &U 清除底色 Separation Name 分离名称 Cyan Magenta 洋红 Yellow Black Scaling: 伸缩: Print... 打印... Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts 在阅读器中提供更加悦目的文本显示,代价是预览稍微缓慢。这只影响Type 1字体 Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing 在预览中提供了对TrueType字体,OpenType字体,EPS,PDF和矢量图更加悦目的显示,代价是预览速度轻微的缓慢。 A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. 调整页面的伸缩比例 Close 关闭 File 文件 PSLib Processing Master Pages: 正处理母页中: Exporting Pages: 导出页面: PageItem Image 图像 Text 文本 Line 线条 Polygon 多边形 Polyline 线套 PathText 路径文本 Copy of Copy of PageItemAttributes None Relates To 相对于 Is Parent Of 是...的父级 Is Child Of 是...的子级 PageItemAttributesBase Page Item Attributes 页面项目属性 Name 名称 Type 类型 Value 数值 Parameter 参数 Relationship 关系 Relationship To 关系于 &Add &A 添加 Alt+A Alt+A &Copy &C 复制 Alt+C Alt+C &Delete &D 删除 Alt+D Alt+D C&lear &L 清除 Alt+L Alt+L &OK &O 确认 &Cancel &C 取消 PageLayouts Page Layout 页面排版 First Page is: 第一页是: PagePalette Double sided 双面 Middle Right 中右 Drag pages or master pages onto the trashbin to delete them 把页面或者母页拖拉到垃圾箱里来删除它们 Here are all your master pages. To create a new page, drag a master page to the page view below 这是你所有的母页。要创建新页,请把母页拖拉到下面页面视图 Normal 普通 Arrange Pages 管理页 Available Master Pages: 可用母页: Document Pages: 文档页: PageSelector %1 of %2 %1 of %2 %1 of %1 %1 of %1 PageSize Quarto Quarto Foolscap Foolscap Letter Letter Government Letter Government Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium 中等 Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E PicSearch Result 结果 Search Results for: 搜索结果给: Preview 预览 Select 选择 Cancel 取消 PicStatus Goto 跳到 Yes OK 确认 Missing 丢失 Search 查找 Name 名称 Path 路径 Page Print 打印 Status 状态 Cancel Search 取消查找 Manage Pictures 管理图片 Scribus - Image Search Scribus-图像查找 The search failed: %1 查找失败: %1 No images named "%1" were found. 图像名叫 "%1" 的没找到。 Select a base directory for search 选择查找的一个基础目录 PixmapExportPlugin Save as &Image... &I 另存为图片... Export As Image 作为图像导出 Exports selected pages as bitmap images. 把选中的页面导出为位图。 PluginManager Cannot find plugin plugin manager 无法找到插件 unknown error plugin manager 未知错误 Cannot find symbol (%1) plugin manager 不能找到标记 (%1) Plugin: loading %1 plugin manager 插件:正在加载 %1 init failed plugin load error init failed unknown plugin type plugin load error 未知插件类型 Plugin: %1 loaded plugin manager 插件: %1 已经加载 Plugin: %1 failed to load: %2 plugin manager 插件: %1 不能加载: %2 PluginManagerPrefsGui Plugin Manager 插件管理器 Plugin 插件 How to run 如何运行 Type 类型 Load it? 加载它吗? Plugin ID 插件ID File 文件 Yes No You need to restart the application to apply the changes. 你必须重新启动程序来应用更改。 PolygonProps Polygon Properties 多边形属性 PolygonWidget Corn&ers: &E 角数: &Rotation: &R 旋转: Apply &Factor &F 应用因式 % % &Factor: &F 因式: Number of corners for polygons 多边形的角数 Degrees of rotation for polygons 多边形的旋转角度 Apply Convex/Concave Factor to change shape of Polygons 应用凹凸大小来改变多边形的形状 Sample Polygon 多边形样本 A negative value will make the polygon concave (or star shaped), a positive value will make it convex 一个负数值将会使多边形变为凹形(或者星形),一个正数值将使它成为凸形。 Preferences Preferences 首选项 General 常规 Document 文档 Guides 参考线 Typography 排版 Tools 工具 Scrapbook 寄存本 Display 显示 GUI 图形界面 Paths 路径 Page Size 页面大小 Custom 自定义 Portrait 竖式 Landscape 横式 Margin Guides 页边距参考线 Autosave 自动保存 min 分钟 pt pt Other Options 其它选项 Preview 预览 Small Medium Choose a Directory 选择一个目录 External Tools 外部工具 Image Processing Tool 图像处理工具 Printing 打印 Default font size for the menus and windows 菜单和窗口的默认字体大小 Default unit of measurement for document editing 文档编辑默认的长度单位 Number of lines Scribus will scroll for each move of the mouse wheel Scribus鼠标滚轮每次滚动移动行数 Number of recently edited documents to show in the File menu 在文件菜单里显示最近编辑文档数目 Default documents directory 默认文档目录 Default Scripter scripts directory 默认脚本器脚本目录 Default page size, either a standard size or a custom size 默认页面尺寸,或是标准的,或是自定义的尺寸 Default orientation of document pages 默认文档页面方向 Width of document pages, editable if you have chosen a custom page size Width of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Height of document pages, editable if you have chosen a custom page size Time period between saving automatically Time period between saving automatically Choose the size of the preview in the scrapbook palette Choose the size of the preview in the scrapbook palette Color for paper Colour for paper Mask the area outside the margins in the margin color Mask the area outside the margins in the margin colour Set the default zoom level Set the default zoom level Antialias text for EPS and PDF onscreen rendering Antialias text for EPS and PDF onscreen rendering Antialias graphics for EPS and PDF onscreen rendering Antialias graphics for EPS and PDF onscreen rendering Do not show objects outside the margins on the printed page or exported file Do not show objects outside the margins on the printed page or exported file Save the scrapbook contents everytime after a change Save the scrapbook contents everytime after a change &Theme: &T 主题: &Wheel Jump: &W 滚轮跳行: &Recent Documents: &R 最近文档: &Documents: &D 文档: &Change... &C 更改... &ICC Profiles: &ICC配置文件: C&hange... &H 更改... &Scripts: &S 脚本: Ch&ange... &A 更改... &Size: &S 尺寸: Orie&ntation: &N 方向: &Width: &W 宽度: &Height: &H 高度: &Bottom: &B 底部: &Top: &T 顶部: &Right: &R 右: &Left: &L 左: &Interval: &I 间隔: Sa&ve Contents on Changes &V 更改时保存内容 Large Display &Unprintable Area in Margin Color &U 用页边颜色标出非打印区域 &Adjust Display Size &A 调整显示尺寸 &Name of Executable: &N 可执行文件的名称: Antialias &Text &T 反锯齿文本 Antialias &Graphics &G 反锯齿图形 Name of &Executable: &E 可执行文件的名字: Clip to Page &Margins &M 按页边距线裁剪 Apply &Under Color Removal &U 应用底色清除 Cha&nge... &N 更改... &Language: &L 语言: Document T&emplates: &E 模板: Units: 单位: Undo/Redo 撤销/重做 Action history length 动作历史长度 Hyphenator 连字符 Fonts 字体 Color Management 色彩管理 PDF Export PDF输出 Document Item Attributes 文档项目属性 Table of Contents and Indexes 内容和索引 Keyboard Shortcuts 键盘快捷键 Page Display 页面显示 Color: 颜色: Alt+U Alt+U Show Pictures 显示图像 Show Text Chains 显示文本链 Show Frames 显示框体 Scratch Space 草稿区 Miscellaneous 其它 Plugins 插件 Turns the display of frames on or off 开闭框体显示 Turns the display of pictures on or off 开闭图片显示 Additional directory for document templates 文档模板的额外目录 Filesystem location for the Ghostscript interpreter Ghostscript解析器在文件系统里的位置 Always ask before fonts are replaced when loading a document 载入文档是总是询问是否替换字体 Show Text Control Characters 显示文本控制符 Preview of current Paragraph Style visible when editing Styles 当编辑样式时显示当前段落样式的预览 To adjust the display drag the ruler below with the slider. 要调节显示,拖拉标尺下面的滑动按钮 Display non-printing characters such as paragraph markers in text frames Display non-printing characters such as paragraph markers in text frames Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Preflight Verifier 印前检验器 dpi dpi Resolution: 分辨率: Lorem Ipsum 范例文本 Always use standard Lorem Ipsum 总是使用标准的范例文本 Count of the Paragraphs: 段落数: Rulers relative to Page 标尺相对于页面 Gaps between Pages 页面之间的间距 Horizontal: 水平: Vertical: 垂直: Show Startup Dialog 显示启动对话 Locate Ghostscript 定位 Ghostscript Locate your image editor 定位图像编辑器 PostScript Interpreter PostScript解析器 Enable or disable the display of linked frames. 开闭连锁框体显示。 Select your default language for Scribus to run with. Leave this blank to choose based on environment variables. You can still override this by passing a command line option when starting Scribus 选择你要Scribus默认使用的语言。留白将默认使用系统环境设定。你还可以在命令行运行Scribus时给出选项。 &Font Size (Menus): &F 字体大小(菜单): Font Size (&Palettes): 字体大小(&P 调色板): Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Default font size for the tool windows 工具窗口的默认尺寸大小 Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. File system location for graphics editor. If you use gimp and your distro includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp. File system location for graphics editor. If you use gimp and your distro includes it, we recommend 'gimp-remote', as it allows you to edit the image in an already running instance of gimp. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. PrefsDialogBase &Defaults &D 默认 Save... 保存... Save Preferences 保存首选项 PrefsManager Postscript Postscript PDF 1.3 PDF 1.3 PDF 1.4 PDF 1.4 PDF/X-3 PDF/X-3 Migrate Old Scribus Settings? 迁移旧的Scribus设置 Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Scribus检测到现存的Scribus 1.2的设置文件。 你想要迁移他们到新的Scribus版本中吗? Single Page 单页 Double sided 双页 Left Page 左页 Right Page 右页 3-Fold 3折 Middle 中间 4-Fold 4折 Middle Left 中左 Middle Right 中右 PostScript PostScript Could not open preferences file "%1" for writing: %2 不能打开首选项文件 "%1" 来写入 %2 Writing to preferences file "%1" failed: QIODevice status code %2 写入 "%1" 失败: QIODevice 状态代码: %2 Failed to open prefs file "%1": %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Failed to read prefs XML from "%1": %2 at line %3, col %4 Error Writing Preferences 错误写入首选项 Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. Error Loading Preferences Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. Scribus无法载入它的首选项 <br>%1<br< 默认设置将被载入 PresetLayout None Magazine 杂志 Fibonacci 斐波纳契 Golden Mean Golden Mean Nine Parts Nine Parts Gutenberg Gutenberg You can select predefined page layout here. 'None' leave margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins for same value. Leading is Left/Inside value. You can select predefined page layout here. 'None' leave margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins for same value. Leading is Left/Inside value. PythonConsole &Open... &O 打开... &Save &S 保存 &Exit &E 退出 &File &F 文档 &Run &R 运行 &Save Output... &S 保存输出... &Script &S 脚本 Script Console 脚本控制台 Write your commands here. A selection is processed as script 在此写你的命令。一个选择作为脚本运行 Output of your script 你的脚本输出 Python Scripts (*.py) Python 脚本 (*.py) Save the Python Commands in File 保存Python命令于文件中 Warning 警告 Text Files (*.txt) 文本文件 (*.txt) Save Current Output 保存当前输出 Save &As... &A 另存为... Run As &Console &C 作为控制台运行 Scribus Python Console Scribus Python控制台 This is derived from standard Python console so it contains some limitations esp. in the case of whitespaces. Please consult Scribus manual for more informations. 这个起源于标准的Python控制台,所以它有一些局限性,特别是在空白空格的时候。更多信息请参考Scribus手册。 Open Python Script File 打开Python脚本文件 QColorDialog Hu&e: Hu&e: &Sat: &Sat: &Val: &Val: &Red: &R 红: &Green: &G 绿: Bl&ue: &U 蓝: A&lpha channel: &L 阿法通道 &Basic colors &B 基本颜色 &Custom colors &C 自定义颜色 &Define Custom Colors >> &D 设定自定义颜色 >> OK 确定 Cancel 取消 &Add to Custom Colors &A 添加到自定义颜色 Select color 选择颜色 QFileDialog Copy or Move a File 复制或移动文件 Read: %1 读取: %1 Write: %1 写入: %1 File &name: &N 文件名: File &type: &T 文件名字: One directory up 上一级目录 Cancel 取消 All Files (*) 全部文件 (*) Name 名称 Size 尺寸 Type 类型 Date 日期 Attributes 属性 OK 确认 Look &in: &L 查找地方: Back 回退 Create New Folder 创建新目录 List View 列举视图 Detail View 详细视图 Preview File Info 预览文件信息 Preview File Contents 预览文件内容 Read-write 只写 Read-only 只读 Write-only 只写 Inaccessible 不可达 Symlink to File 指向文件的链接 Symlink to Directory 指向目录的链接 Symlink to Special 指向特别对象的链接 File 文件 Dir 目录 Special 特别对象 Open 打开 Save As 另存为 &Open &O 打开 &Save &S 保存 &Rename &R 重命名 &Delete &D 删除 R&eload &E 重新载入 Sort by &Name &N 按名称排序 Sort by &Size &S 按大小排序 Sort by &Date &D 按日期排序 &Unsorted &U 不排序 Sort 排序 Show &hidden files &H 显示隐藏文件 the file 文件 the directory 目录 the symlink 链接 Delete %1 删除 %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> <qt>你真的要删除 %1 "%2"?</qt> &Yes &Y 是 &No &N 否 New Folder 1 新文件夹 1 New Folder 新建文件夹 New Folder %1 新文件夹 %1 Find Directory 查找文件夹 Directories 目录 Save 保存 Error 错误 %1 File not found. Check path and filename. %1 文件未找到。 请检查路径和文件名。 All Files (*.*) 全部文件 (*.*) Select a Directory 选择一个目录 Directory: 目录: QFontDialog &Font &F 字体 Font st&yle &Y 字体样式 &Size &S 尺寸 Effects 特效 Stri&keout &K 中划线 &Underline &U 下划线 &Color &C 颜色 Sample 范例 Scr&ipt &I 脚本 OK 确定 Apply 应用 Cancel 取消 Close 关闭 Select Font 选择字体 QLineEdit Clear 清除 Select All 全选 &Undo &U 撤销 &Redo &R 重做 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 QMainWindow Line up Line up Customize... 自定义... QMessageBox <h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for multiplatform GUI &amp; application development.</p><p>Qt provides single-source portability across MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, and all major commercial Unix variants.<br>Qt is also available for embedded devices.</p><p>Qt is a Trolltech product. See <tt>http://www.trolltech.com/qt/</tt> for more information.</p> <h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for multiplatform GUI &amp; application development.</p><p>Qt provides single-source portability across MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, and all major commercial Unix variants.<br>Qt is also available for embedded devices.</p><p>Qt is a Trolltech product. See <tt>http://www.trolltech.com/qt/</tt> for more information.</p> QObject Initializing... 起始中... Background 背景 Warning 警告 Do you really want to overwrite the File: %1 ? 你真的要覆盖文件: %1 ? Open Open Save as 另存为 SVG-Images (*.svg *.svgz);;All Files (*) SVG-图像 (*.svg *.svgz);;全部文件 (*) SVG-Images (*.svg);;All Files (*) SVG-图像 (*.svg);;全部文件 (*) Yes No Save as Image 另存为图像 Error writing the output file(s). 写入输出文件错误。 Export successful. 输出成功。 File exists. Overwrite? 文件存在。覆盖吗? exists already. Overwrite? 已经存在。覆盖吗? Yes all 全部是 All Supported Formats (*.eps *.EPS *.ps *.PS);; 所以支持的格式 (*.eps *.EPS *.ps *.PS);; All Files (*) 全部文件 (*) Newsletters 时事传报 Brochures 小册子 Catalogs 商品目录 Flyers 传单 Signs 标志 Cards 卡片 Letterheads 信头 Envelopes 信封 Business Cards 名片 Calendars 日历 Advertisements 广告 Labels 标签 Menus 菜单 Programs 程序 PDF Forms PDF表单 PDF Presentations PDF报告 Magazines 杂志 Posters 海报 Announcements 公告 Text Documents 文本文档 Folds 折页 Own Templates 自己模板 Importing text 导入文本 All Supported Formats 全部支持的格式 HTML Files HTML文件 html html Text Files Text文件 Comma Separated Value Files 以逗号分开数值的文件 CSV_data CSV_数据 CSV_header CSV_头 Font %1 is broken, discarding it 字体 %1 破损,忽略它 External Links 外部链接 Text Filters 文本过滤器 Media Cases 媒质 Albanian 阿尔巴尼亚语 Basque 巴斯克语 Bulgarian 保加利亚语 Brazilian 巴西语 Catalan 加态隆语 Chinese 汉语 Czech 捷克语 Danish 丹麦语 Dutch 荷兰语 English 英语 English (British) 英式英语 Esperanto 世界语 German 德语 Finnish 芬兰语 French 法语 Galician 加利西亚语 Greek 希腊语 Hungarian 匈牙利语 Indonesian 印尼语 Italian 意大利语 Korean 韩语 Lithuanian 立陶宛语 Norwegian (Bokmaal) 挪威语 (Bokmaal) Norwegian (Nnyorsk) 挪威语 (Nnyorsk) Norwegian 挪威语 Polish 波兰语 Russian 俄语 Swedish 瑞典语 Spanish 西班牙语 Spanish (Latin) 西班牙语(拉丁) Slovak 斯洛伐克语 Slovenian 斯洛文尼亚语 Serbian 塞尔维亚语 Cannot get font size of non-text frame. python error Cannot get font size of non-text frame. Cannot get font of non-text frame. python error Cannot get font of non-text frame. Cannot get text size of non-text frame. python error Cannot get text size of non-text frame. Cannot get column count of non-text frame. python error Cannot get column count of non-text frame. Cannot get line space of non-text frame. python error Cannot get line space of non-text frame. Cannot get column gap of non-text frame. python error Cannot get column gap of non-text frame. Cannot get text of non-text frame. python error Cannot get text of non-text frame. Cannot set text of non-text frame. python error Cannot set text of non-text frame. Cannot insert text into non-text frame. python error Cannot insert text into non-text frame. Alignment out of range. Use one of the scribus.ALIGN* constants. python error Alignment out of range. Use one of the scribus.ALIGN* constants. Selection index out of bounds python error Selection index out of bounds Unit out of range. Use one of the scribus.UNIT_* constants. python error Unit out of range. Use one of the scribus.UNIT_* constants. Target is not an image frame. python error Target is not an image frame. Corner radius must be a positive number. python error Corner radius must be a positive number. Cannot get a color with an empty name. python error Cannot get a colour with an empty name. Cannot change a color with an empty name. python error Cannot change a colour with an empty name. Cannot create a color with an empty name. python error Cannot create a colour with an empty name. Cannot delete a color with an empty name. python error Cannot delete a colour with an empty name. Cannot replace a color with an empty name. python error Cannot replace a colour with an empty name. OpenOffice.org Draw (*.sxd);;All Files (*) OpenOffice.org Draw (*.sxd);;All Files (*) OpenOffice.org Writer Documents OpenOffice.org Writer Documents Color not found - python error python error Colour not found - python error Custom (optional) configuration: short words plugin Custom (optional) configuration: Standard configuration: short words plugin Standard configuration: Short Words processing. Wait please... short words plugin Short Words processing. Wait please... Short Words processing. Done. short words plugin Short Words processing. Done. Afrikaans Afrikaans Turkish 土耳其语 Ukranian 乌克兰语 Welsh 威尔士语 The filename must be a string. python error 文件名必须是个字串。 Cannot delete image type settings. python error Cannot delete image type settings. The image type must be a string. python error The image type must be a string. 'allTypes' attribute is READ-ONLY python error 'allTypes' attribute is READ-ONLY Failed to export image python error Failed to export image Color not found. python error Colour not found. Color not found in document. python error Colour not found in document. Color not found in default colors. python error Colour not found in default colours. Cannot scale by 0%. python error Cannot scale by 0%. Specified item not an image frame. python error Specified item not an image frame. Font not found. python error Font not found. Cannot render an empty sample. python error Cannot render an empty sample. Cannot have an empty layer name. python error Cannot have an empty layer name. Layer not found. python error Layer not found. Cannot remove the last layer. python error Cannot remove the last layer. Cannot create layer without a name. python error Cannot create layer without a name. Insert index out of bounds. python error Insert index out of bounds. Cannot set text alignment on a non-text frame. python error Cannot set text alignment on a non-text frame. Font size out of bounds - must be 1 <= size <= 512. python error Font size out of bounds - must be 1 <= size <= 512. Cannot set font size on a non-text frame. python error Cannot set font size on a non-text frame. Cannot set font on a non-text frame. python error Cannot set font on a non-text frame. Line space out of bounds, must be >= 0.1. python error Line space out of bounds, must be >= 0.1. Cannot set line spacing on a non-text frame. python error Cannot set line spacing on a non-text frame. Column gap out of bounds, must be positive. python error Column gap out of bounds, must be positive. Cannot set column gap on a non-text frame. python error Cannot set column gap on a non-text frame. Column count out of bounds, must be > 1. python error Column count out of bounds, must be > 1. Cannot set number of columns on a non-text frame. python error Cannot set number of columns on a non-text frame. Cannot select text in a non-text frame python error Cannot select text in a non-text frame Cannot delete text from a non-text frame. python error Cannot delete text from a non-text frame. Cannot set text fill on a non-text frame. python error Cannot set text fill on a non-text frame. Cannot set text stroke on a non-text frame. python error Cannot set text stroke on a non-text frame. Cannot set text shade on a non-text frame. python error Cannot set text shade on a non-text frame. Can only link text frames. python error Can only link text frames. Target frame must be empty. python error Target frame must be empty. Target frame links to another frame. python error Target frame links to another frame. Target frame is linked to by another frame. python error Target frame is linked to by another frame. Source and target are the same object. python error Source and target are the same object. Cannot unlink a non-text frame. python error Cannot unlink a non-text frame. Cannot convert a non-text frame to outlines. python error Cannot convert a non-text frame to outlines. Can't set bookmark on a non-text frame python error Can't set bookmark on a non-text frame Can't get info from a non-text frame python error Can't get info from a non-text frame OpenDocument Text Documents OpenDocument Text Documents Croatian 克罗地亚语 Portuguese 葡萄牙语 Portuguese (BR) 葡萄牙语 (BR) Custom 自定义 Page 页面 Master Page 母页 4A0 4A0 2A0 2A0 Comm10E Comm10E DLE DLE Output stream not writeable 输出流不可写 Verification of settings failed: %1 Verification of settings failed: %1 Unable to read settings XML: Unable to read settings XML: %1 (line %2 col %3) Load PDF settings %1 (line %2 col %3) Unable to read settings XML: %1 Unable to read settings XML: %1 null root node Load PDF settings null root node <pdfVersion> invalid Load PDF settings <pdfVersion> invalid found %1 <%2> nodes, need 1. Load PDF settings found %1 <%2> nodes, need 1. unexpected null <%2> node Load PDF settings unexpected null <%2> node node <%1> not an element Load PDF settings node <%1> not an element element <%1> lacks `value' attribute Load PDF settings element <%1> lacks `value' attribute element <%1> value must be `true' or `false' Load PDF settings element <%1> value must be `true' or `false' element <lpiSettingsEntry> lacks `name' attribute Load PDF settings element <lpiSettingsEntry> lacks `name' attribute Font %1 (found using fontconfig) is broken, discarding it Font %1 (found using fontconfig) is broken, discarding it Scribus Development Version Scribus 开发中版本 pt pt mm mm in in p p cm cm pt pt mm mm in in p p cm cm Points (pt) 点 (pt) Millimeters (mm) 毫米 (mm) Inches (in) 英寸 (in) Picas (p) 十二点活字 (p) Centimeters (cm) 厘米 (cm) File exists 文件存在 &Replace &R 替换 All 全部 Document Template: 文档模板: Failed to open document. python error 无法打开文档 Failed to save document. python 错误 Failed to save document. Argument must be page item name, or PyCObject instance 参数必须是页面项目名称,或者是PyCObject实例 Property not found 没找到属性 Child not found 没找到子级 Couldn't convert result type '%1'. 无法转换结果类型 '%1'. Property type '%1' not supported Property type '%1' not supported Couldn't convert '%1' to property type '%2' Couldn't convert '%1' to property type '%2' Types matched, but setting property failed. Types matched, but setting property failed. Unable to save pixmap scripter error Unable to save pixmap An object with the requested name already exists. python error An object with the requested name already exists. Point list must contain at least two points (four values). python error Point list must contain at least two points (four values). Point list must contain an even number of values. python error Point list must contain an even number of values. Point list must contain at least three points (six values). python error Point list must contain at least three points (six values). Point list must contain at least four points (eight values). python error Point list must contain at least four points (eight values). Point list must have a multiple of six values. python error Point list must have a multiple of six values. Object not found. python error Object not found. Style not found. python error Style not found. Cannot set style on a non-text frame. python error Cannot set style on a non-text frame. Failed to save EPS. python error Failed to save EPS. Page number out of range. python error Page number out of range. argument is not list: must be list of float values. python error argument is not list: must be list of float values. argument contains non-numeric values: must be list of float values. python error argument contains non-numeric values: must be list of float values. argument contains no-numeric values: must be list of float values. python error argument contains no-numeric values: must be list of float values. Line width out of bounds, must be 0 <= line_width <= 12. python error Line width out of bounds, must be 0 <= line_width <= 12. Line shade out of bounds, must be 0 <= shade <= 100. python error Line shade out of bounds, must be 0 <= shade <= 100. Fill shade out of bounds, must be 0 <= shade <= 100. python error Fill shade out of bounds, must be 0 <= shade <= 100. Line style not found. python error Line style not found. Object is not a linked text frame, can't unlink. python error Object is not a linked text frame, can't unlink. Object the last frame in a series, can't unlink. Unlink the previous frame instead. python error Object the last frame in a series, can't unlink. Unlink the previous frame instead. Only text frames can be checked for overflowing python error Only text frames can be checked for overflowing &Execute Script... &E 执行脚本... Show &Console &C 显示控制台 &About Script... &A 关于脚本... &Script &S 脚本 &Scribus Scripts &Scribus脚本 &Recent Scripts &R 最近脚本 About Script 关于脚本 Scribus Python interface module This module is the Python interface for Scribus. It provides functions to control scribus and to manipulate objects on the canvas. Each function is documented individually below. A few things are common across most of the interface. Most functions operate on frames. Frames are identified by their name, a string - they are not real Python objects. Many functions take an optional (non-keyword) parameter, a frame name. Many exceptions are also common across most functions. These are not currently documented in the docstring for each function. - Many functions will raise a NoDocOpenError if you try to use them without a document to operate on. - If you do not pass a frame name to a function that requires one, the function will use the currently selected frame, if any, or raise a NoValidObjectError if it can't find anything to operate on. - Many functions will raise WrongFrameTypeError if you try to use them on a frame type that they do not make sense with. For example, setting the text color on a graphics frame doesn't make sense, and will result in this exception being raised. - Errors resulting from calls to the underlying Python API will be passed through unaltered. As such, the list of exceptions thrown by any function as provided here and in its docstring is incomplete. Details of what exceptions each function may throw are provided on the function's documentation, though as with most Python code this list is not exhaustive due to exceptions from called functions. Scribus Python interface module This module is the Python interface for Scribus. It provides functions to control scribus and to manipulate objects on the canvas. Each function is documented individually below. A few things are common across most of the interface. Most functions operate on frames. Frames are identified by their name, a string - they are not real Python objects. Many functions take an optional (non-keyword) parameter, a frame name. Many exceptions are also common across most functions. These are not currently documented in the docstring for each function. - Many functions will raise a NoDocOpenError if you try to use them without a document to operate on. - If you do not pass a frame name to a function that requires one, the function will use the currently selected frame, if any, or raise a NoValidObjectError if it can't find anything to operate on. - Many functions will raise WrongFrameTypeError if you try to use them on a frame type that they do not make sense with. For example, setting the text colour on a graphics frame doesn't make sense, and will result in this exception being raised. - Errors resulting from calls to the underlying Python API will be passed through unaltered. As such, the list of exceptions thrown by any function as provided here and in its docstring is incomplete. Details of what exceptions each function may throw are provided on the function's documentation, though as with most Python code this list is not exhaustive due to exceptions from called functions. Could not open output file %1 Could not open output file %1 Could not open input file %1 Could not open input file %1 Freetype2 library not available Freetype2库不可用 Font %1 is broken, no embedding 字体 %1 破损,将不嵌入 Font %1 is broken (read stream), no embedding 字体 %1 破损 (查看流),将不嵌入 Font %1 is broken (FreeType2), discarding it 字体 %1 破损 (FreeType2),将放弃它 Font %1 is broken (no Face), discarding it 字体 %1 破损 (没字型),将放弃它 Font %1 has broken glyph %2 (charcode %3) 字体 %1 有破损字符 %2 (字符码 %3) Font %1 is broken and will be discarded 字体 %1 破损而且将被放弃 Font %1 cannot be read, no embedding Font %1 cannot be read, no embedding Failed to load font %1 - font type unknown Failed to load font %1 - font type unknown Font %1 loaded from %2(%3) Font %1 loaded from %2(%3) Font %1(%2) is duplicate of %3 Font %1(%2) is duplicate of %3 Loading font %1 (found using fontconfig) Loading font %1 (found using fontconfig) Failed to load a font - freetype2 couldn't find the font file Failed to load a font - freetype2 couldn't find the font file Font %1 is broken (FreeType), discarding it Font %1 is broken (FreeType), discarding it Font %1 has invalid glyph %2 (charcode %3), discarding it Font %1 has invalid glyph %2 (charcode %3), discarding it extracting face %1 from font %2 (offset=%3, nTables=%4) extracting face %1 from font %2 (offset=%3, nTables=%4) memcpy header: %1 %2 %3 memcpy header: %1 %2 %3 table '%1' table '%1' memcpy table: %1 %2 %3 memcpy table: %1 %2 %3 memcpy offset: %1 %2 %3 memcpy offset: %1 %2 %3 Scribus Crash Scribus崩溃 Scribus crashes due to Signal #%1 Scribus崩溃了,因由信号 #%1 &OK &O 确认 Can't group less than two items python error 不能群组少于2个项目 Need selection or argument list of items to group python error 群组需要项目选择范围或者参数列表 Cannot group less than two items python error 不能群组少于2个项目 c c c c Cicero (c) Cicero (c) The filename should not be empty string. python error 文件名不应该是一个空白字串。 page page export Copy #%1 of Copy #%1 of Black Cyan Magenta 洋红 Yellow Color Wheel 颜色转盘 Font Preview 字体预览 My Plugin 我的插件 New From Template 从模板新建 Export As Image 以图像导出 PS/EPS Importer PS/EPS 导入器 Save As Template 另存为模板 Scripter 脚本器(Scripter) Short Words Short Words SVG Export 导出SVG SVG Import 导入SVG OpenOffice.org Draw Importer OpenOffice.org Draw导入器 Scribus crashes due to the following exception : %1 Scribus崩溃了,因由以下异常: %1 Creating Font Cache 创建字体缓冲 New Font found, checking... 发现新字体,验证中... Modified Font found, checking... 发现更改过的字体,验证中... Reading Font Cache 读取字体缓冲 Writing updated Font Cache 写入已更新字体缓冲 Searching for Fonts 搜索字体 You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.3 or lower. The process of saving will make this file unusable again in Scribus 1.2.3 unless you use File->Save As. Are you sure you wish to proceed with this operation? You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.3 or lower. The process of saving will make this file unusable again in Scribus 1.2.3 unless you use File->Save As. Are you sure you wish to proceed with this operation? The changes to your document have not been saved and you have requested to revert them. Do you wish to continue? The changes to your document have not been saved and you have requested to revert them. Do you wish to continue? A file named '%1' already exists.<br/>Do you want to replace it with the file you are saving? A file named '%1' already exists.<br/>Do you want to replace it with the file you are saving? firstPageOrder is bigger than allowed. python error firstPageOrder is bigger than allowed. Old .sla format support 老 .sla 格式支持 German (Trad.) 德语 (传统) Exporting PostScript File 输出PostScript文件 Printing File 打印文件 <p>You are trying to import more pages than there are available in the current document counting from the active page.</p>Choose one of the following:<br><ul><li><b>Create</b> missing pages</li><li><b>Import</b> pages until the last page</li><li><b>Cancel</b></li></ul> <p>You are trying to import more pages than there are available in the current document counting from the active page.</p>Choose one of the following:<br><ul><li><b>Create</b> missing pages</li><li><b>Import</b> pages until the last page</li><li><b>Cancel</b></li></ul> C&reate &R 创建 &Import &I 导入 Thai 泰语 QTextEdit Clear Clear Select All 全选 &Undo &U 撤销 &Redo &R 重做 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 QTitleBar System Menu 系统菜单 Shade 阴暗 Unshade 取消阴暗 Normalize 正常化 Minimize 最小化 Maximize 最大化 Close 关闭 QWorkspace &Restore &R 恢复 &Move &M 移动 &Size &S 尺寸 Mi&nimize &N 最小化 Ma&ximize &X 最大化 &Close &C 关闭 Stay on &Top &T 呆在顶上 Minimize 最小化 Restore Down 往下恢复 Close 关闭 Sh&ade &A 阴暗 %1 - [%2] %1 - [%2] &Unshade &Unshade ReformDoc Document Setup 文档设置 Margin Guides 页边距参考线 &Top: &T 顶: &Left: &L 左: &Bottom: &B 底: &Right: &R 右: Page Size 页面尺寸 Custom 自定义 Portrait 竖式 Landscape 横式 &Size: &S 尺寸: Orie&ntation: &N 页面方向 &Width: &W 宽度: &Height: &H 高度: &Unit: &U 单位: Autosave 自动保存 min 分钟 &Interval: &I 间隔: Document 文档 Guides 参考线 Page Display 页面显示 Color: 颜色: Display &Unprintable Area in Margin Color &U 以页边色显示不可打印区域 Alt+U Alt+U Show Pictures 显示图片 Show Text Chains 显示文本连锁 Show Frames 显示框体 Display 显示 Typography 排版 Tools 工具 Hyphenator 连字符 Fonts 字体 PDF Export PDF输出 Document Item Attributes 文档项目属性 Table of Contents and Indexes 内容和索引 Color Management 色彩管理 Turns the display of frames on or off 开闭框体显示 Turns the display of pictures on or off 开闭图片显示 Color for paper 纸张颜色 Mask the area outside the margins in the margin color 把页边距外的区域用页边距颜色蒙上 Document Information 文档信息 Show Text Control Characters 显示文本控制符 Display non-printing characters such as paragraph markers in text frames 显示文本框里的非打印字符如段落标记 Preflight Verifier 印前检验器 Rulers relative to Page 标尺相对应于页面 Minimum Scratch Space 最小草稿区 Gaps between Pages 页之间的间距 Horizontal: 水平: Vertical: 垂直: Adjusting Colors 调整颜色: Enable or disable the display of linked text frames. 启用/关闭文本框连锁显示 Apply size settings to all pages 应用尺寸设置到所有页 Sections 区域 Apply the page size changes to all existing pages in the document 应用页面尺寸改变到文档中现有全部页面 RunScriptDialog Python Scripts (*.py);; All Files (*) Python脚本 (*.py);; 全部文件 (*) Run as Extension Script run script dialog 作为扩展脚本来运行 SToolBAlign Style of current paragraph 当前段落的样式 Style Settings 样式设置 SToolBColorF None Color of text fill 文本填充色 Saturation of color of text fill 文本填充色的饱和度 Fill Color Settings 填充色设置 SToolBColorS None Color of text stroke 文本轮廓的颜色 Saturation of color of text stroke 文本轮廓的颜色饱和度 Stroke Color Settings 轮廓颜色设置 SToolBFont pt pt % % Font of selected text 选中文本的字体 Font Size 字体大小 Scaling width of characters 字符宽缩放 Font Settings 字体设置 Scaling height of characters 字符高缩放 SToolBStyle Character Settings 字符设置 Manual Tracking 手工追踪 % % SVGExportPlugin Save Page as &SVG... &S 页面另存为SVG... Exports SVG Files 导出SVG文件 Exports the current page into an SVG file. 把当前页导出为一个SVG文件。 SVGImportPlugin Import &SVG... &S 导入SVG... Imports SVG Files 导入SVG文件 Imports most SVG files into the current document, converting their vector data into Scribus objects. 导入大部分SVG文件到当前文档,把它们的矢量数据转换为Scribus对象。 Scalable Vector Graphics 可缩放矢量图 SVG file contains some unsupported features SVG文件包含一些不被支持的功能 SWDialog Short Words short words plugin Short Words Apply unbreakable space on: short words plugin 应用不间断的空格于: &Selected frames short words plugin &S 所选框体 Active &page short words plugin Active &page &All items short words plugin &All items Only selected frames processed. short words plugin Only selected frames processed. Only actual page processed. short words plugin Only actual page processed. All items in document processed. short words plugin All items in document processed. SWPrefsGui User settings User settings System wide configuration System wide configuration &Save &S 保存 &Reset &R 重置 Save user configuration 保存用户设置 Reload system wide configuration and remove user defined one 重新载入系统范围的设置并清除用户定义的设置 Edit custom configuration. If you save it, it will be used over system wide configuration 编辑自定义的设置。如果你保存了它,它将覆盖系统范围的设置 Short Words Short Words User configuration exists elready. Do you really want to overwrite it? 用户设置已经存在。你真的要覆盖它吗? Cannot write file %1. 不能写入文件 %1 。 User settings saved 用户设置被保存 System wide configuration reloaded 系统范围的设置被重新加载 Cannot open file %1 不能打开文件 %1 SaveAsTemplatePlugin Save as &Template... &T 保存为模板... Save a document as a template 把文档保存为模板 Save a document as a template. Good way to ease the initial work for documents with a constant look 把文档保存为模板。轻松创建具有类似外观的文件的一个好方法。 ScPlugin Persistent plugin manager plugin type 持续 Action plugin manager plugin type 动作 Load/Save/Import/Export 载入/保存/导入/导出 Unknown 未知 ScWinPrint Printing... ScriXmlDoc Copy #%1 of Copy #%1 of Background 背景 ScribusColorList Document Colors 文档颜色 ScribusDoc New Layer 新图层 Normal 普通 Document 文档 Background 背景 ScribusMainWindow None Initializing Plugins 启动插件 Initializing Keyboard Shortcuts 启动键盘快捷键 Reading Preferences 读取首选项 Initializing Story Editor 启动故事编辑器 Reading ICC Profiles 读取ICC配置文件 Initializing Hyphenator 启动连字符器 Reading Scrapbook 读取寄存本 Setting up Shortcuts 设置快捷键 File 文件 Edit 编辑 Searching for Fonts 查找字体 There are no fonts found on your system. 系统中没有找到字体。 Exiting now. 现在退出中。 Fatal Error 致命错误 Font System Initialized 字体系统被启动 &File &F 文件 Open &Recent &R 打开最近 &Import &I 导入 &Export &E 导出 &Edit &E 编辑 St&yle &Y 格式 &Color &C 颜色 &Size &S 尺寸 &Shade &S 阴暗 &Font &F 字体 &Effects &E 效果 &Item &I 效果 Preview Settings 预览设置 Level 高低 Send to La&yer &Y 发送到图层 &PDF Options &PDF选项 &Shape &S 形状 C&onvert To &O 转换为 I&nsert &N 插入 Character 字符 Quote 引号 Space 空间 &Page &P 页面 &View &V 查看 E&xtras &X 附加命令 &Windows &W 窗口 &Help &H 帮助 &Alignment &A 对齐 Ready 就绪 Open O 打开 Importing Pages... 导入页... Import Page(s) 导入页 Import done 导入结束 Found nothing to import 导入没有找到任何东西 File %1 is not in an acceptable format 文件 %1 格式不可接受 Loading... 载入... PostScript PostScript Some ICC profiles used by this document are not installed: 这个文档使用的一些ICC配置文件没有安装: was replaced by: 被取代为: (converted) (被转换) All Supported Formats 所有支持的格式 All Files (*) 所有文件 (*) Cannot write the file: %1 不能写入文件: %1 Documents (*.sla *.sla.gz *.scd *scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) Save As 另存为 Saving... 保存中... Scribus has detected some errors. Consider using the Preflight Verifier to correct them Scribus已经检测到一些错误。考虑用印前检验器来纠正它们。 &Ignore &I 忽略 &Abort &A 退出 Printing... 打印中... Document 文档 Printing failed! Printing failed! Cannot Cut In-Use Item 不能剪切正在使用的项目 The item %1 is currently being edited by Story Editor. The cut operation will be cancelled 项目 %1 目前正被故事编辑器编辑中,剪切操作将被取消 About Qt 关于Qt Scribus Manual Scribus使用手册 Save as 另存为 Text Files (*.txt);;All Files(*) 文本文件 (*.txt);;全部文件(*) Normal 普通 Name: 名称: Convert Page to Master Page 把页转换为母页 New Master Page 新建母页 &Size: &S 尺寸: Size 尺寸 &Shade: &S 阴暗: Shade 阴暗 No Style 没有样式 The following programs are missing: 以下段落丢失: Ghostscript : You cannot use EPS images or Print Preview Ghostscript:你不能使用ESP图像或者打印预览 All 全部 Scribus detected some errors. Consider using the Preflight Verifier to correct them. Scribus检测到一些错误。 考虑使用印前检验器来纠正它们 EPS Files (*.eps);;All Files (*) EPS文件 (*.eps);;所有文件 (*) Detected some errors. Consider using the Preflight Verifier to correct them 检测到一些错误。 考虑使用印前检验器来纠正它们 -Page%1 -页%1 Some objects are locked. 某些对象被锁定 &Lock All &L 全部锁定 &Unlock All &U 全部解锁 Information 信息 The program %1 is already running! 程序 %1 已经在运行中! The program %1 is missing! 程序 %1 不存在! The selected color does not exist in the document's color set. Please enter a name for this new color. 所选的颜色在文档的颜色组合中不存在。请为这个新颜色输入一个名字。 Color Not Found 颜色不存在 The name you have selected already exists. Please enter a different name for this new color. 你为新颜色选择的名承已经存在。请输入一个新名称。 &Level &L 高低 Send to Layer 发送到图层 Previe&w Settings &W 预览设置 &Tools &T 工具 X-Pos: X-坐标: Y-Pos: Y-坐标: Ghostscript : You cannot use EPS images or PostScript Print Preview Ghostcript:你不能使用EPS图像或者PostScript打印预览 Ghostscript is missing : Postscript Print Preview is not available Ghostscript丢失:Postscript打印预览不可用 ScribusQApp Invalid argument: 无效参数: File %1 does not exist, aborting. 文件 %1 不存在,退出中。 Usage: scribus [option ... ] [file] 用法:scribus [选项...] [文件] Options: 选项: Print help (this message) and exit 打印帮助(这个信息)然后退出 Uses xx as shortcut for a language, eg `en' or `de' 使用XX作为一个语言的快捷键,例如'en'或者'de' List the currently installed interface languages 列出当前已经安装的界面语言 Show information on the console when fonts are being loaded 在控制台显示字体被载入的时间信息 Do not show the splashscreen on startup 在启动时不显示启动窗口 Output version information and exit 输出版本信息然后退出 Use right to left dialog button ordering (eg. Cancel/No/Yes instead of Yes/No/Cancel) 使用从右到左的对话按钮顺序(例如:取消/否/是,而不是 是/否/取消) filename 文件名 Use filename as path for user given preferences 用文件名作为用户给出的首选项路径 Installed interface languages for Scribus are as follows: 为Scribus已经安装的界面语言如下: To override the default language choice: 覆盖默认语言选择: scribus -l xx or scribus --lang xx, where xx is the language of choice. scribus -l xx 或者 scribus --lang xx,这里xx是语言选择 Scribus Version Scribus版本 Scribus, Open Source Desktop Publishing Scribus,开源桌面出版 Homepage 主页 Documentation 文档 Wiki Wiki Issues 问题 ScribusView % % Layer 图层 Copy Here 复制到这里 Move Here 移动到这里 Cancel 取消 &Paste &P 粘贴 Picture 图片 File: 文件: Original PPI: 原始PPI: Actual PPI: 实际PPI: Linked Text 串联的文本 Text Frame 文本框 Text on a Path 路径上文本 Paragraphs: 段落: Words: 词: Chars: 字符: Print: 打印: Enabled 已启用 Disabled 已禁用 In&fo &F 信息 Preview Settings 预览设置 &PDF Options &PDF选项 Send to La&yer &Y 发送到图层 Le&vel &V 高低 Conve&rt to &R 转换为 &Delete &D 删除 Cannot Delete In-Use Item 不能删除正在使用的项目 The item %1 is currently being edited by Story Editor. The delete operation will be cancelled 项目 %1 正被故事编辑器使用中。删除操作将被取消。 Linking Text Frames 串联文本框 You are trying to link to a filled frame, or a frame to itself. 你正在尝试链接到一个已填充框,或者本框 Do you really want to clear all your text? 你真的要清除所有的文本吗? Cannot Convert In-Use Item 不能转换正在使用的项目 The item %1 is currently being edited by Story Editor. The convert to outlines operation for this item will be skipped 项目 %1 当前正在被故事编辑器编辑。把当前项目转换为曲线的操作将被跳过 Page %1 to %2 页 %1 到 %2 Colorspace: 颜色模式: Unknown 未知 RGB RGB CMYK CMYK Grayscale 灰度 ScribusWin Document: 文档: has been changed since the last save. 自上次保存已被更改过。 &Discard &D 放弃 ScriptPlugin Embedded Python scripting support. 嵌入的Python脚本支持。 Scripter 脚本器(Scripter) ScripterCore Script error 脚本错误 If you are running an official script report it at <a href="http://bugs.scribus.net">bugs.scribus.net</a> please. 如果你正在运行一个官方的脚本,请在 <a href="http://bugs.scribus.net">bugs.scribus.net</a> 报告。 This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker. 这个信息同时存在于剪切班。使用Ctrl+V来粘贴到臭虫追踪器里面 Examine Script 检验脚本 There was an internal error while trying the command you entered. Details were printed to stderr. 在尝试你所输入的命令是出现一个内部错误。详细信息被打印到标准输出了。 Setting up the Python plugin failed. Error details were printed to stderr. 设置Python插件失败。具体错误信息已被打印到标准输出。 Python Scripts (*.py);;All Files (*) ScripterPrefsGui Scripter Preferences 脚本器首选项 Enable Extension Scripts 启用扩展脚本 Extensions 扩展 Console 控制台 Startup Script: 启动运行脚本: Errors: syntax highlighting 语法高亮: Comments: syntax highlighting 说明: Keywords: syntax highlighting 关键词: Signs: syntax highlighting 签名: Numbers: syntax highlighting 数字: Strings: syntax highlighting 字串: Base Texts: syntax highlighting 基本文本: Select Color 选择颜色 SeList Show Page Previews 显示页面预览 SearchReplace Search/Replace 查找/替换 Search for: 查找: Text 文本 Paragraph Style 段落样式 Font 字体 Font Size 字体尺寸 Font Effects 字体效果 Fill Color 填充颜色 Fill Shade 填充阴影 Stroke Color 边颜色 Stroke Shade 边阴暗 Left Center Right Block 区块 Forced 强制 pt pt None Replace with: 替代为: Search finished 查找结束 &Whole Word &W 整个字 &Ignore Case &I 忽略大小写 &Search &S 查找 &Replace &R 替代 Replace &All &A 全部替代 &Close &C 关闭 C&lear &L 清除 Search finished, found %1 matches 查找结束,找到 %1 符合 SelectFields Select Fields 选择域 Available Fields 可用域 Selected Fields 选中域 &>> &>> &<< &<< ShadeButton Other... 其他... Shade 阴暗 &Shade: &S 阴暗: ShadowValues % % X-Offset X-移位 (ENGB) Y-Offset Y-移位 ShortWordsPlugin Short &Words... short words plugin Short &Words... Short Words Short Words SideBar No Style 没有样式 Edit Styles... 编辑样式... Spalette No Style 没有样式 StilFormate Edit Styles 编辑样式 Copy of %1 Copy of %1 New Style 新样式 Open 打开 Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) Documents (*.sla *.scd);;All Files (*) 文档 (*.sla *.scd);;全部文件 (*) &New &N 新建 &Edit &E 编辑 D&uplicate &U 复件 &Delete &D 删除 &Import &I 导入 StoryEditor Story Editor 故事编辑器 Current Paragraph: 当前段落: Words: 字: Chars: 字符: Totals: 总计: Paragraphs: 段落: Open 打开 Text Files (*.txt);;All Files(*) 文本文件 (*.txt);;全部文件(*) Save as 另存 Do you want to save your changes? 你要保存更改吗? &New &N 新建 &Reload Text from Frame &R 从框体重新载入文本 &Save to File... &S 保存到文件... &Load from File... &L 从文件载入... Save &Document &D 保存文档 &Update Text Frame and Exit &U 更新文本框然后退出 &Exit Without Updating Text Frame &E 不更新文本框就退出 Cu&t &T 剪切 &Copy &C 复制 &Paste &P 粘贴 C&lear &L 清除 &Update Text Frame &U 更新文本框 &File &F 文件 &Edit &E 编辑 Select &All &A 全选 &Edit Styles... &E 编辑样式... File 文件 Load Text from File 从文件加载文本 Save Text to File 把文本另存到文件 Update Text Frame and Exit 更新文本框并退出 Exit Without Updating Text Frame 退出而不更新文本框 Reload Text from Frame 从框重新加载文本 Update Text Frame 更新文本框 &Search/Replace... &S 查找/替代... &Fonts Preview... &F 字体预览... &Background... &B 背景... &Display Font... &D 显示字体... &Settings &S 设置 Search/Replace 查找/替代 &Smart text selection &S 智能文本选择 &Insert Glyph... &I 插入符号... Clear All Text 清除全部文本 Story Editor - %1 故事编辑器 - %1 Do you really want to lose all your changes? 你真的想丢失所有更改吗? Do you really want to clear all your text? 你真的想清除你所有的文本吗? StrikeValues Auto 自动 % % Displacement 移位 Linewidth 线宽 StyleSelect Underline 下划线 Small Caps 小写 Subscript 下标 Superscript 上标 Strike Out 中划线 All Caps 全部大写 Outline 轮廓 Shadow 阴影 Underline Words Only 只文字下划线 SxwDialog Use document name as a prefix for paragraph styles 把文档名称作为段落样式的一个前缀 Do not ask again 下次不再问 OK 确认 OpenOffice.org Writer Importer Options OpenOffice.org Writer导入器选项 Enabling this will overwrite existing styles in the current Scribus document 启用这个将覆写当前Scribus文档现有的样式 Merge Paragraph Styles 合并段落样式 Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. 按属性合并段落样式。这将减少类似段落样式的数量,将保持段落样式的属性,即使原始文档的样式的命名不同。 Prepend the document name to the paragraph style name in Scribus. 把文档名称追加到Scribus里的段落样式的名称。 Make these settings the default and do not prompt again when importing an OpenOffice.org 1.x document. 把这些设定作为默认值而且不要在每次导入一个 OpenOffice.org 1.x 文件时又询问 Overwrite Paragraph Styles 覆写段落样式 Cancel 取消 TOCIndexPrefs None Table of Contents and Indexes 内容索引列表 Table Of Contents 内容列表 &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D Item Attribute Name: 项目属性名称: Destination Frame: 目标框: At the beginning 在开始处 At the end 在结尾处 Not Shown 不显示 The frame the table of contents will be placed into 内容列表将被放入的框体 Page Numbers Placed: 放置的页码: The Item Attribute that will be set on frames used as a basis for creation of the entries 将被创建条目作为基础的框体里的项目属性 Place page numbers of the entries at the beginning or the end of the line, or not at all Place page numbers of the entries at the beginning or the end of the line, or not at all List Non-Printing Entries 列出不可打印的条目 Include frames that are set to not print as well 也包括被设为不可打印的框体 The paragraph style used for the entry lines 被条目行使用的段落样式 Paragraph Style: 段落样式: Inde&x &X 索引 TOCIndexPrefsBase Table of Contents and Indexes 内容和索引 Table Of Contents 内容 &Add &A 添加 Alt+A Alt+A &Delete &D 删除 Alt+D Alt+D The frame the table of contents will be placed into 内容将被放置入的框体 Page Numbers Placed: 安置的页码: Item Attribute Name: Item Attribute Name: The Item Attribute that will be set on frames used as a basis for creation of the entries The Item Attribute that will be set on frames used as a basis for creation of the entries Place page numbers of the entries at the beginning or the end of the line, or not at all Place page numbers of the entries at the beginning or the end of the line, or not at all List Non-Printing Entries List Non-Printing Entries Include frames that are set to not print as well Include frames that are set to not print as well The paragraph style used for the entry lines The paragraph style used for the entry lines Paragraph Style: Paragraph Style: Destination Frame: Destination Frame: Inde&x Inde&x TabCheckDoc Ignore all errors 忽略全部错误 Automatic check before printing or exporting 在打印或输出前自动检测 Check for missing glyphs 检测丢失字形 Check for objects not on a page 检测不在页面上的对象 Check for overflow in text frames 检测文本框溢出 Check for transparencies used 检测使用透明度 Check for missing images 检测丢失图像 Check image resolution 检测图像分辨率 Lowest allowed resolution 最低允许分辨率 dpi dpi Check for placed PDF Files 检测置入PDF文件 Check for PDF Annotations and Fields 检测PDF注释和域 Add Profile 添加配置文件 Remove Profile 移除配置文件 TabGuides Common Settings 普通设置 Placing in Documents 文档中的位置 In the Background 在背景 In the Foreground 在前景 Snapping 附着 Snap Distance: 附着距离: Grab Radius: 抓取半径: px px Show Guides 显示参考线 Color: 颜色: Show Margins 显示页边距 Show Page Grid 显示页面网格 Major Grid 主网格 Spacing: 间距: Minor Grid 次网格 Show Baseline Grid 显示基线网格 Baseline Settings Baseline Settings Baseline &Grid: &G 基线网格: Baseline &Offset: &O 基线位移: Distance between the minor grid lines Distance between the minor grid lines Distance between the major grid lines Distance between the major grid lines Distance within which an object will snap to your placed guides Distance within which an object will snap to your placed guides Radius of the area where Scribus will allow you to grab an objects handles Radius of the area where Scribus will allow you to grab an objects handles Color of the minor grid lines Colour of the minor grid lines Color of the major grid lines Colour of the major grid lines Color of the guide lines you insert Colour of the guide lines you insert Color for the margin lines Colour for the margin lines Color for the baseline grid Colour for the baseline grid Turns the basegrid on or off Turns the basegrid on or off Turns the gridlines on or off Turns the gridlines on or off Turns the guides on or off Turns the guides on or off Turns the margins on or off Turns the margins on or off Guides are not visible through objects on the page Guides are not visible through objects on the page Guides are visible above all objects on the page Guides are visible above all objects on the page Distance between the lines of the baseline grid Distance between the lines of the baseline grid Distance from the top of the page for the first baseline Distance from the top of the page for the first baseline TabManager Manage Tabulators Manage Tabulators TabPDFOptions Export Range 输出范围 &All Pages &A 全部页面 C&hoose Pages &H 选择页面 &Rotation: &R 旋转: File Options 文件选项 Compatibilit&y: &Y 兼容性: &Binding: &B 装订: Left Margin 左边距 Right Margin 右边距 Generate &Thumbnails &T 生成缩图 Save &Linked Text Frames as PDF Articles &L 把文本框连锁另存为PDF项目 &Include Bookmarks &I 包括书签 dpi dpi &Resolution for EPS Graphics: &R EPS图的分辨率: Com&press Text and Vector Graphics &P 压缩文本和矢量图 Image Settings 图像设置 Automatic 自动 JPEG JPEG Zip Zip None Maximum 最大 High Medium Low Minimum 最小 &General &G 常规 &Embed all Fonts &E 嵌入全部字体 &Subset all Fonts &S 子集所有字体 Embedding 嵌入 Available Fonts: 可用字体: &>> &>> &<< &<< Fonts to embed: 嵌入的字体: Fonts to subset: 子集的字体: &Fonts &F 字体 Enable &Presentation Effects &P 启用报告效果 Page Show Page Pre&views &V 显示页面预览 Effects 特效 &Display Duration: &D 显示持续时间: Effec&t Duration: &T 特效持续时间: Effect T&ype: &Y 特效类型: &Moving Lines: &M 移动的线条: F&rom the: &R 来自: D&irection: &I 方向: sec No Effect 没有特效 Blinds 百叶窗 Box 盒子 Dissolve 溶解 Glitter 闪烁 Split 劈开 Wipe 擦拭 Horizontal 水平 Vertical 垂直 Inside 里面 Outside 外面 Left to Right 从左到右 Top to Bottom 从顶到底 Bottom to Top 从底到顶 Right to Left 从右到左 Top-left to Bottom-Right 从左上到右下 &Apply Effect on all Pages &A 应用特效到所有页 E&xtras &X 附加 &Use Encryption &U 使用加密 Passwords 密码 &User: &U 用户名: &Owner: &O 所有者: Settings 设置 Allow &Printing the Document &P 文档允许打印 Allow &Changing the Document &C 允许更改文档 Allow Cop&ying Text and Graphics &Y 允许复制文本和图像 Allow Adding &Annotations and Fields &A 允许添加注释和表单域 S&ecurity &E 安全 General 普通 Output &Intended For: &I 输出目的: Screen / Web 屏幕/网页 Printer 打印机 Grayscale 灰度 &Use Custom Rendering Settings &U 使用自定义渲染设置 Rendering Settings 渲染设置 Fre&quency: &Q 频率: &Angle: &A 角度: S&pot Function: S&pot Function: Simple Dot 单点 Line 线条 Round Ellipse 椭圆 Solid Colors: 单色 Use ICC Profile 使用ICC配置文件 Profile: 配置文件: Rendering-Intent: 渲染意图: Perceptual 感官 Relative Colorimetric 相对比色 Saturation 饱和度 Absolute Colorimetric 绝对比色 Images: 图像: Don't use embedded ICC profiles 不使用嵌入ICC配置文件 C&olor &O 颜色 PDF/X-3 Output Intent PDF/X-3 输出意图 &Info String: &信息字串: Output &Profile: &P 输出配置文件: Trim Box 裁剪方框 PDF/X-&3 PDF/X-&3 Show page previews of each page listed above. 显示以上列出的每页的页面预览。 Length of time the page is shown before the presentation starts on the selected page. 在选中的页里开始报告前页面显示时间长度。 Type of the display effect. 显示特效类型。 Direction of the effect of moving lines for the split and blind effects. 劈开或百叶窗特效动态线条的方向。 Starting position for the box and split effects. 方盒和劈开特效的开始位置。 Direction of the glitter or wipe effects. Direction of the glitter or wipe effects. Apply the selected effect to all pages. Apply the selected effect to all pages. Export all pages to PDF Export all pages to PDF Export a range of pages to PDF 把一个页范围导出为PDF Generate PDF Articles, which is useful for navigating linked articles in a PDF. Generate PDF Articles, which is useful for navigating linked articles in a PDF. DPI (Dots Per Inch) for image export. 导出图像DPI (每英寸的点数)。 Choose a password for users to be able to read your PDF. 选择一个用户可以读取你的PDF文件的密码。 Allow printing of the PDF. If un-checked, printing is prevented. 允许打印PDF。如果不勾选,打印被禁止。 Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. 允许修改PDF。如果不勾选,修改PDF被禁止。 Embed a color profile for solid colors 为单色嵌入颜色配置文件 Color profile for solid colors 单色的颜色配置文件 Rendering intent for solid colors 单色的渲染意图 Embed a color profile for images 为图像嵌入一个颜色配置文件 Do not use color profiles that are embedded in source images 不使用源图像中嵌入的颜色配置文件 Color profile for images 图像的颜色配置文件 Rendering intent for images 图像的渲染意图 Output profile for printing. If possible, get some guidance from your printer on profile selection. 用于打印的输出配置文件。如果允许,从你的打印者那里获取关于配置文件选择的指导。 Distance for bleed from the top of the physical page Distance for bleed from the top of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the bottom of the physical page Distance for bleed from the left of the physical page Distance for bleed from the left of the physical page Distance for bleed from the right of the physical page Distance for bleed from the right of the physical page Mirror Page(s) horizontally 水平镜像页面 Mirror Page(s) vertically 垂直镜像页面 Enables presentation effects when using Adobe&#174; Reader&#174; in full screen mode. Enables presentation effects when using Adobe&#174; Reader&#174; in full screen mode. Convert Spot Colors to Process Colors Convert Spot Colours to Process Colours Compression &Quality: &Q 压缩质量: Determines the PDF compatibility. The default is PDF 1.3 which gives the widest compatibility. Choose PDF 1.4 if your file uses features such as transparency or you require 128 bit encryption. PDF/X-3 is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer. Determines the PDF compatibility. The default is PDF 1.3 which gives the widest compatibility. Choose PDF 1.4 if your file uses features such as transparency or you require 128 bit encryption. PDF/X-3 is for exporting the PDF when you want colour managed RGB for commercial printing and is selectable when you have activated colour management. Use only when advised by your printer or in some cases printing to a 4 colour digital colour laser printer. Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options. Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colours. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options. Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied. Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied. Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented. Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. Include La&yers &Y 包括图层 Compression Metho&d: &D 压缩方式: Resa&mple Images to: &M 重新采样图像为: Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. 嵌入字体到PDF。嵌入字体将保持你的文档的版面外观。 Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Layers in your document are exported to the PDF Only available if PDF 1.5 is choosen. Layers in your document are exported to the PDF Only available if PDF 1.5 is choosen. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size. Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size. Re-sample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. This can increase memory usage and slow down export. Re-sample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. This can increase memory usage and slow down export. Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Choose a master password which enables or disables all the security features in your exported PDF Choose a master password which enables or disables all the security features in your exported PDF Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Colour model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 colour CMYK printer. This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Display Settings 显示设置 Page Layout 页面排版 Single Page 单页 Continuous 连续的 Double Page Left 双页左 Double Page Right 双页右 Visual Appearance 视觉外观 Use Viewers Defaults 使用阅读器默认 Use Full Screen Mode 使用全屏模式 Display Bookmarks Tab 宣示书签栏 Display Thumbnails 显示缩图 Display Layers Tab 显示图层栏 Hide Viewers Toolbar 隐藏查看器工具栏 Hide Viewers Menubar 隐藏查看器菜单栏 Zoom Pages to fit Viewer Window 适应查看器窗口 Special Actions 特别动作 Javascript to be executed when Document is opened: 文档被打开时执行的Javascript No Script 没有脚本 Viewer 查看器 TabTools Font: 字体: pt pt Size: 尺寸: None Fill Color: 填充颜色: Stroke Color: 轮廓颜色: Colu&mns: &M 列: &Gap: &G 间距: Woven silk pyjamas exchanged for blue quartz Woven silk pyjamas exchanged for blue quartz &Line Color: &L 线条颜色: % % &Shading: &S 阴暗: &Fill Color: &F 填充颜色: S&hading: &H 阴暗: Line Style: 线条样式: Line &Width: &W 线条宽度: Line S&tyle: &T 线条样式: Arrows: 箭形: Start: 开始: End: 结束: &Free Scaling &F 自由缩放 &Horizontal Scaling: &H 水平缩放: &Vertical Scaling: &V 垂直缩放: &Scale Picture to Frame Size &S 按框体大小缩放图像 Keep Aspect &Ratio &R 保持比例 F&ill Color: &L 填充颜色 Use embedded Clipping Path 使用嵌入剪切路径 On Screen Preview 屏幕预览 Full Resolution Preview 完全分辨率预览 Normal Resolution Preview 普通分辨率预览 Low Resolution Preview 低分辨率预览 Mi&nimum: &N 最小: Ma&ximum: &X 最大: &Stepping: &S 步长: Text Frame Properties 文本框属性 Picture Frame Properties 图像框属性 Shape Drawing Properties 形状绘制属性 Magnification Level Defaults 默认放大级别 Line Drawing Properties 线条绘制属性 Polygon Drawing Properties 多边形绘制属性 Font for new text frames 新建文本框的字体 Size of font for new text frames 新建文本框的字体大小 Color of font 字体颜色 Number of columns in a text frame 文本框中的列数 Gap between text frame columns 文本框中列间隔 Sample of your font 你的字体范例 Picture frames allow pictures to scale to any size 图像框允许图像伸缩到任意尺寸 Horizontal scaling of images 水平伸缩图像 Vertical scaling of images 垂直伸缩图像 Keep horizontal and vertical scaling the same 保存水平和垂直伸缩相同 Pictures in picture frames are scaled to the size of the frame 图像框中的图像被伸缩到图像框的尺寸 Automatically scaled pictures keep their original proportions 自动伸缩图像到原始的比例 Fill color of picture frames 给图像框填充颜色 Saturation of color of fill 填充颜色的饱和度 Line color of shapes 形状的线条颜色 Saturation of color of lines 线条颜色的饱和度 Fill color of shapes 给形状填充颜色 Line style of shapes 形状的线条样式 Line width of shapes 形状的线条宽度 Minimum magnification allowed 允许最小缩放率 Maximum magnification allowed 允许最大缩放率 Change in magnification for each zoom operation 每次缩放操作的缩放比例变化 Color of lines 线条的颜色 Saturation of color 颜色饱和度 Style of lines 线条样式 Width of lines 线条宽度 Tab Fill Character: 制表符填充字符: Tab Width: 制表符宽度: Custom: 自定义: Custom: 自定义: Text Color: 文本颜色: Shading: 阴暗: Text Stroke: 文本笔划: Dot Hyphen 中杠 Underscore 底线 Custom 自定义 TabTypograpy Subscript 下标 % % &Displacement: &D 移位: &Scaling: &S 缩放: Superscript 上标 D&isplacement: &I 移位 S&caling: &C 缩放: Small Caps 小写 Sc&aling: &A 缩放: Underline 下划线 Displacement: 移位: Auto 自动 Line Width: 线条宽度: Strikethru 中划线 Automatic &Line Spacing &L 自动线条间隔 Line Spacing: 线条间隔: Displacement above the baseline of the font on a line 在一条线上字体基线的位移 Relative size of the superscript compared to the normal font 和普通字体对比上标的相对尺寸 Displacement below the baseline of the normal font on a line 在一条线上普通字体的底线下的位移 Relative size of the subscript compared to the normal font 和普通字体对比下标的相对尺寸 Relative size of the small caps font compared to the normal font 和普通字体相比小写字体的相对尺寸 Percentage increase over the font size for the line spacing 在字体大小的基础上为行距所增加的百分比 Displacement below the baseline of the normal font expressed as a percentage of the fonts descender 以字体后继百分比表示的普通字体底线下面的位移 Line width expressed as a percentage of the font size 以字体大小的百分比表示的行宽 Displacement above the baseline of the normal font expressed as a percentage of the fonts ascender 以字体后继百分比表示的普通字体底线上面的位移 Tabruler Left Right Full Stop 句号 Comma 逗号 Center Centre Delete All 全部删除 Indentation for first line of the paragraph 段落首行缩进 Indentation from the left for the whole paragraph 整个段落从左缩进 Delete all Tabulators 删除所有制表符 &Position: &P 位置: None Fill Char: 填充字符: Custom: 自定义: Custom: 自定义: Dot Hyphen 连字符 Underscore 底线 Custom 自定义 Tree Outline 结构树 Element 元素 Group 群组 Free Objects 自由对象 Page UnderlineValues Auto 自动 % % Displacement 移位 Linewidth 线宽 UndoManager Add vertical guide 添加垂直参考线 Add horizontal guide 添加水平参考线 Remove vertical guide 移除垂直参考线 Remove horizontal guide 移除水平参考线 Move vertical guide 移动垂直参考线 Move horizontal guide 移动水平参考线 Lock guides 锁定参考线 Unlock guides 解锁参考线 Move 移动 Resize 缩放 Rotate 旋转 X1: %1, Y1: %2, %3 X2: %4, Y2: %5, %6 X1: %1, Y1: %2, %3 X2: %4, Y2: %5, %6 W1: %1, H1: %2 W2: %3, H2: %4 W1: %1, H1: %2 W2: %3, H2: %4 Selection 选择 Group 群组 Selection/Group 选择/群组 Create 生成 X: %1, Y: %2 W: %3, H: %4 X: %1, Y: %2 W: %3, H: %4 Align/Distribute 对齐/排列 Items involved 参加项目 Cancel 取消 Set fill color 设置填充颜色 Color1: %1, Color2: %2 颜色1: %1, 颜色2: %2 Set fill color shade 设置填充颜色阴暗 Set line color 设施线条颜色 Set line color shade 设置线条颜色阴暗 Flip horizontally 水平翻转 Flip vertically 垂直翻转 Lock 锁定 Unlock 解锁 Lock size 锁定尺寸 Unlock size 解锁尺寸 Ungroup 解群组 Delete 删除 Rename 重命名 From %1 to %2 从 %1 to %2 Apply Master Page 应用母页 Paste 粘贴 Cut 剪切 Set fill color transparency 设置填充颜色透明度 Set line color transparency 设置线条颜色透明度 Set line style 设置线条样式 Set the style of line end 设置线条尾端的样式 Set the style of line join 设置线条接点的样式 Set line width 设置线宽 No style 没有样式 Set custom line style 设置自定义线条样式 Do not use custom line style 不用自定义线条样式 Set start arrow 设置前端箭头 Set end arrow 设置尾端箭头 Create table 创建表格 Rows: %1, Cols: %2 行: %1, 列: %2 Set font 设置字体 Set font size 设置字体大小 Set font width 设置字体宽度 Set font fill color 设置字体填充色 Set font stroke color 设置字体轮廓色 Set font fill color shade 设置字体填充色阴暗 Set font stroke color shade 设置字体轮廓色阴暗 Set kerning 设置字距调整 Set line spacing 设置行距 Set paragraph style 设置段落样式 Set language 设置语言 Align text 对齐文本 Set font effect 设置字体效果 Image frame 图像框 Text frame 文本框 Polygon 多边形 Bezier curve 齐贝尔曲线 Polyline 多线 Convert to 转换成 Import SVG image 导入SVG图像 Import EPS image 导入EPS图像 Scratch space 草稿区 Text flows around the frame 文本环绕框体 Text flows around bounding box 文本环绕方盒 Text flows around contour line 文本环绕轮廓线 No text flow 没有文本流 No bounding box 无限制方框 No contour line 没有轮廓线 Page %1 页 %1 Set image scaling 设置图像缩放 Frame size 框大小 Free scaling 自由缩放 Keep aspect ratio 保持比例 Break aspect ratio 打破比例 Edit contour line 编辑轮廓线 Edit shape 编辑形状 Reset contour line 重置轮廓线 Add page 添加页 Add pages 添加页 Delete page 删除页 Delete pages 删除页 Add layer 添加图层 Delete layer 删除图层 Rename layer 重命名图层 Raise layer 升高图层 Lower layer 降低图层 Send to layer 发送到图层 Enable printing of layer 允许图层打印 Disable printing of layer 取消图层打印 Change name of the layer 更改图层名称 Get image 获取图像 Import OpenOffice.org Draw image 导入OpenOffice.org Draw图像 Set font height 设置字体高 Text on a Path 路径里的文本 UndoPalette Initial State 起始状态 Action History 动作历史 Show selected object only 只显示选中对象 &Undo &U 撤销动作 &Redo &R 重复动作 UndoWidget %1: %2 undo target: action (f.e. Text frame: Resize) %1: %2 ValueDialog Insert value 插入数值 Enter a value then press OK. 输入一个数值然后按确定 Enter a value then press OK 输入一个数值然后按确定 Alt+O Alt+O Send your value to the script 发一个数值给脚本 WerkToolB Tools 工具 Properties... 属性... WerkToolBP Button 按钮 Text Field 文本域 Check Box 勾选框 Combo Box 多选框 List Box 列举框 Text 文本 Link 链接 PDF Tools PDF 工具 Insert PDF Fields 插入PDF域 Insert PDF Annotations 插入PDF注释 gtFileDialog Choose the importer to use 选择要使用的导入器 Automatic 自动 Import text without any formatting 不带格式地导入文本 Importer: 导入器: Encoding: 编码: Import Text Only 只导入文本 gtImporterDialog Choose the importer to use 选择要用的导入器 Remember association 记住关系 Remember the file extension - importer association and do not ask again to select an importer for files of this type. 记住文件后缀-导入器绑定而且下一次为此文件类型自动选择导入器。 nftdialog New From Template 从模板新建 All 全部 Name 名称 Page Size 页面尺寸 Colors 颜色 Description 描述 Usage 使用 Created with 制作工具 Author 作者 &Remove &R 移除 &Open &O 打开 Downloading Templates 下载模板 Installing Templates 安装模板中 Extract the package to the template directory ~/.scribus/templates for the current user or PREFIX/share/scribus/templates for all users in the system. 把包解压缩到当前用户的模板目录 ~/.scribus/templates中,或者解压缩到PREFIX/share/scribus/templates目录中,以便系统中所有的用户都可以使用。 Preparing a template 正在准备一个模板 Removing a template 正在删除一个模板 Translating template.xml 正在翻译 template.xml Document templates can be found at http://www.scribus.net/ in the Downloads section. Document templates can be found at http://www.scribus.net/ in the Downloads section. Make sure images and fonts you use can be used freely. If fonts cannot be shared do not collect them when saving as a template. Make sure images and fonts you use can be used freely. If fonts cannot be shared do not collect them when saving as a template. The template creator should also make sure that the Installing Templates section above applies to their templates as well. This means a user should be able to download a template package and be able to extract them to the template directory and start using them. The template creator should also make sure that the Installing Templates section above applies to their templates as well. This means a user should be able to download a template package and be able to extract them to the template directory and start using them. Removing a template from the New From Template dialog will only remove the entry from the template.xml, it will not delete the document files. A popup menu with remove is only shown if you have write access to the template.xml file. Removing a template from the New From Template dialog will only remove the entry from the template.xml, it will not delete the document files. A popup menu with remove is only shown if you have write access to the template.xml file. Copy an existing template.xml to a file called template.lang_COUNTRY.xml (use the same lang code that is present in the qm file for your language), for example template.fi.xml for Finnish language template.xml. The copy must be located in the same directory as the original template.xml so Scribus can load it. Copy an existing template.xml to a file called template.lang_COUNTRY.xml (use the same lang code that is present in the qm file for your language), for example template.fi.xml for Finnish language template.xml. The copy must be located in the same directory as the original template.xml so Scribus can load it. Date 日期 satdialog Save as Template 保存为模板 Name 名称 Category 类别 Page Size 页面尺寸 Colors 颜色 Description 描述 Usage 用途 Author 作者 Email 电子邮件 More Details 更多细节 OK 确认 Less Details 更少细节 Legal Legal Letter 信纸 Tabloid 小报 landscape 横式 portrait 竖式 custom 自定义 tfDia Create filter 生成过滤器 C&lear &L 清除 &Delete &D 删除 Choose a previously saved filter 选择一个以前保存好的过滤器 Give a name to this filter for saving 给这个过滤器起个名称以便保存 Give a name for saving Give a name for saving tfFilter Disable or enable this filter row 禁用或启用这个过滤行 Remove this filter row 清除这个过滤行 Add a new filter row 现在添加一个新过滤行 to and remove match 清楚符合的 do not remove match 不清除符合的 words Remove 清除 Replace 替换 Apply 应用 Value at the left is a regular expression 左边的数值是一个正则表达式 with paragraph style 段落样式 all instances of 所有情况 all paragraphs 所有段落 paragraphs starting with 段落开始于 paragraphs with less than 段落不多于 paragraphs with more than 段落不少于 WebSVN - Scribus - Blame - Rev 4635 - /trunk/Scribus/resources/translations/po/scribus.zh_CN.ts

Subversion Repositories Scribus

Rev

Rev 4471 | Rev 4759 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line