getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list 傳回檔案中所有已定義顏色名稱的列表 getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool 顯示 "新建檔案" 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵, 檔案將不會新建. 如果新檔案已經新增, 傳回 "真". messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) 開新的 pageName 的主頁, 並打開它來編輯. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) 刪除已命名的主頁 getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. getVGuides() See getHGuides. setVGuides() See setHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) 在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主). @default changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColour("name", c, m, y, k) Changes the colour "name" to the specified CMYK value. The colour value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in the range from 0 to 255. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. createMasterPage(pageName) 開新的 pageName 的主頁, 並打開它來編輯. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new colour "name". The colour Value is defined via four components: c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in the range from 0 to 255. May raise ValueError if an invalid colour name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the colour "name". Every occurence of that colour is replaced by the colour "replace". If not specified, "replace" defaults to the colour "None" - transparent. deleteColor works on the default document colours if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteMasterPage(pageName) Delete the named master page. deleteMasterPage(pageName) 刪除已命名的主頁 deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. deselectAll() Deselects all objects in the whole document. deselectAll() Deselects all objects in the whole document. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the opional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) getActiveLayer() -> string Returns the name of the current active layer. getActiveLayer() -> string Returns the name of the current active layer. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. getChild(object, childname, ofclass=None, recursive=True) Return the first child of `object' named `childname', possibly restricting the search to children of type name `ofclass'. If `recursive' is true, search recursively through children, grandchildren, etc. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True) Return a list of children of `object', possibly restricted to children of class named `ofclass' or children named `ofname'. If `recursive' is true, search recursively through children, grandchildren, etc. See QObject::children() in the Qt docs for more information. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four colour components of the colour "name" from the current document. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three colour components of the colour "name" from the current document, converted to the RGB colour space. If no document is open, returns the value of the named colour from the default document colours. May raise NotFoundError if the named colour wasn't found. May raise ValueError if an invalid colour name is specified. getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list 傳回檔案中所有已定義顏色名稱的列表 getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius isexpressed in points. If "name" is not given the currentlyselected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillShade(["name"]) -> integer Returns the shading value of the fill colour of the object "name". If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFontNames() -> list Returns a list with the names of all available fonts. getFontNames() -> list Returns a list with the names of all available fonts. getGuiLanguage() -> string Returns a string with the -lang value. getGuiLanguage() -> string Returns a string with the -lang value. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getLayers() -> list Returns a list with the names of all defined layers. getLayers() -> list Returns a list with the names of all defined layers. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineColor(["name"]) -> string Returns the name of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineJoin(["name"]) -> integer (see contants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineShade(["name"]) -> integer Returns the shading value of the line colour of the object "name". If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. getVGuides() See getHGuides. getVGuides() See getHGuides. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (curently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. haveDoc() -> bool Returns true if there is a document open. haveDoc() -> bool Returns true if there is a document open. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting at position -1 appends text to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. masterPageNames() Returns a list of the names of all master pages in the document. masterPageNames() Returns a list of the names of all master pages in the document. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool 顯示 "新建檔案" 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵, 檔案將不會新建. 如果新檔案已經新增, 傳回 "真". newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. pageCount() -> integer Returns the number of pages in the document. pageCount() -> integer Returns the number of pages in the document. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. redrawAll() Redraws all pages. redrawAll() Redraws all pages. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the colour "name" is replaced by the colour "replace". May raise NotFoundError if a named colour wasn't found. May raise ValueError if an invalid colour name is specified. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertext at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positve values mean counter clockwise rotation. If "name" is not given the currently selected item is used. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame selectionCount() -> integer Returns the number of selected objects. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". selectObject("name") Selects the object with the given "name". selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillColor("color", ["name"]) Sets the fill colour of the object "name" to the colour "color". "color" is the name of one of the defined colours. If "name" is not given the currently selected item is used. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFillShade(shade, ["name"]) Sets the shading of the fill colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Colour intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line colour of the object "name" to the colour "color". If "name" is not given the currently selected item is used. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line colour of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMargins(lr, rr, tr, br) Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets wether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text colour of the text frame "name" to the colour "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text colour of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full colour intensity). If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. setVGuides() See setHGuides. setVGuides() See setHGuides. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textFlowsAroundFrame("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional boolean "state". If "state" is not passed, text flow is toggled. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. zoomDocument(double) 在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主). AIPlug Analyzing File: 分析檔案: Generating Items 產生物件中 Group%1 群組%1 Importing: %1 正在匯入: %1 About %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribus 版本 %1</b><p>%2<br/>%3 %4<br/>%5</p> <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Abort Update Check 中止更新檢查 &About 關於 (&A) About Scribus %1 關於 Scribus %1 A&uthors 作者 (&U) Bugs and Feature Requests 回報錯誤及功能請求 Build ID: 編譯 ID: Check for Updates 檢查是否有更新 Check for updates to Scribus. No data from your machine will be transferred off it. 檢查是否有 Scribus 的更新。這不會從你的電腦裡傳送任何資料。 &Close 關閉 (&C) Contributions from: 貢獻者: Developer Blog 開發者部落格 Development Team: 開發團隊: Homepage 首頁 &Licence 許可 (&L) Mac OS&#174; X Aqua Port: Mac OS&#174; X Aqua 移植: Mac OSX Aqua Port: Mac OSX Aqua 移植: Mailing List 郵遞列表 Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 遺失的函式庫支援以 * 表示。這同時也顯示 Scribus 偵測到的 Ghostscript 版本。 No Ghostscript version available 沒有可用的 Ghostscript 版本 Official Documentation: 官方文件: Official Translations and Translators: 官方翻譯及翻譯者: &Online 線上資料 (&O) Online Reference 線上參考資料 OS/2&#174;/eComStation&#8482; Port: OS/2&#174;/eComStation&#8482; 移植: Other Documentation: 其他文件: Previous Translation Contributors: 先前翻譯貢獻者: Scribus Version Scribus 版本 Splash Screen: 起始視窗: Tango Project Icons: Tango Project Icons: The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt C-C-T-F 其中 C=littlecms, C=CUPS, T=TIFF 支援, F=Fontconfig 支援。最後一個字母是渲染器, C=cairo 或 Q=Qt The Windows version does not use fontconfig or CUPS libraries. Windows 版本沒有使用 fontconfig 或 CUPS 函式庫。 This panel shows the version, build date and compiled in library support in Scribus. 這個面板顯示版本, 編譯日期, 和 Scribus 中編譯進函式庫的支援。 This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 這個面板顯示Scribus版本, 編譯日期, 並且已經編譯到 Scribus 的支援的函式庫中, 這裡 C-C-T-F 指的是 C=littlecms C=CUPS T=TIFF 支援 F=Fontconfig, 最後一個字母是渲染器(?) C=cairo 或者 A=libart。不存在的支援函式庫以*號表示. 這個也註明瞭Scribus檢測到的Ghostscript版本號碼 This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. 這個面板顯示版本, 編譯日期, 和支援 Scribus 的 library。C-C-T-F 代表 C=littlecms C=CUPS T=TIFF 支援 F=Fontconfig 支援。 &Translations 翻譯 (&T) Unable to open licence file. Please check your install directory or the Scribus website for licencing information. 無法打開許可檔案。要取得許可資訊, 請查看你安裝的目錄或是 Scribus 的檔案。 &Updates 更新 (&U) Using Ghostscript version %1 使用的 Ghostscript 版本 %1 Wiki Wiki Windows Port: Windows 移植: Windows&#174; Port: Windows&#174; 移植: Doc Translators: 文件翻譯: Webmasters: 網站管理: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. 無法開啟檔案 %1。請檢查你的安裝目錄或瀏覽 Scribus 的網站來獲得 %1 的資訊。 AboutPlugins Author(s): 作者: Copyright: 版權: Description: 描述: Enabled: 啓用: Filename: 檔案名: License: 授權: No Release Date: 發佈日期: Scribus: About Plug-ins Scribus: 關於插件 Version: 版本: Yes AboutPluginsBase Alt+C Alt+C Author(s): 作者: &Close 關閉 (&C) Copyright: 版權: Description: 描述: Enabled: 啓用: File Name: 檔案名: License: 授權: Release Date: 發佈日期: Scribus: About Plug-ins Scribus: 關於插件 Version: 版本: ActionManager &%1 % %1 % (&%) %1 pt %1 pt &100% &100% &200% &200% &400% &400% &50% &50% &75% &75% &About Plugins 關於插件 (&A) &About Plug-ins 關於插件 (&A) About &Qt 關於 &Qt &About Scribus 關於 Scribus (&A) Action &History 歷史動作 (&H) Adjust Frame to Image 調整框體適應圖片大小 Advanced Select All... 進階全部選擇... &Align and Distribute 對齊和分佈 (&A) &All Caps 全部大寫 (&A) Annotation P&roperties 注釋屬性 (&R) Apostrophe 上標點 Apostrophe Unicode 0x0027 上標點 Append &Text... 追加文字 (&T)... &Apply Master Page... 套用主頁 (&A)... &Arrange Pages 安排頁面 (&A) &Attach Text to Path 將文字附到路徑上 (&A) &Attributes... 特性 (&A)... &Bezier Curve 貝茲曲線 (&B) &Block 區塊 (&B) &Bookmarks 書籤 (&B) Bullet 項目符號 &Cascade 層疊 (&C) &Center 中間 (&C) Check for Updates 檢查是否有更新 CJK Double Left 中日韓雙左 CJK Double Left Unicode 0x300E 中日韓雙左 CJK Double Right 中日韓雙右 CJK Double Right Unicode 0x300F 中日韓雙右 CJK Single Left 中日韓左單 CJK Single Left Unicode 0x300C 中日韓左單 CJK Single Right 中日韓右單 CJK Single Right Unicode 0x300D 中日韓右單 C&lear 清除 (&L) C&lear Contents 清除內容 (&L) &Close 關閉 (&C) Collect for O&utput... 準備輸出 (&U)... C&olors... 顔色 (&O)... Column Break 分列 &Combine Polygons 合併多邊形 (&C) Convert to Master Page... 轉換爲主頁... &Copy 複製 (&C) Copy Item Properties 複製物件屬性 &Copy... 複製 (&C)... Copyright 版權 Cu&t 剪下 (&T) Dehyphenate Text 取消連字元 &Delete 刪除 (&D) &Delete... 刪除 (&D)... &Deselect All 取消全選 (&D) &Detach Text from Path 從路徑分離文字 (&D) Document &Setup... 檔案設定 (&S)... Double Left Unicode 0x201C 雙面左邊 Double Left 雙面左邊 Double Left Guillemet 左雙引號 Double Left Guillemet Unicode 0x00AB 左雙引號 Double Reversed 雙面反轉 Double Reversed Unicode 0x201F 雙面反轉 Double Right 雙面右邊 Double Right Unicode 0x201D 雙面右邊 Double Right Guillemet Unicode 0x00BB 右雙引號 Double Right Guillemet 右雙引號 D&uplicate 複製 (&U) Edit Contents of Frame 編輯框內容 Edit Image... 編輯圖片... &Edit Shape... 編輯形狀 (&E)... Edit Source... 編輯來源... Edit Text... 編輯文字... Edit the text with the Story Editor 用故事編輯器編輯文字 Em Dash Em 破折號 Em Space En Dash En 破折號 En Space Extended Image Properties 圖片延伸屬性 Inline Frames &Eye Dropper 取色器 (&E) ff ffi ffl fi Field P&roperties 文字域屬性 (&R) Figure Dash 圖形破折號 &Fit in window 符合視窗 (&F) &Fit to Height 符合高度 (&F) Fit to Width 符合寬度 fl &Flip Horizontally 水平翻轉 (&F) &Flip Vertically 垂直翻轉 (&F) &Forced 強制 (&F) Frame Break 分框 &Frame... 框體 (&F)... &Freehand Line 手繪線 (&F) ft &Full Resolution 完全解析度 (&F) &Generate Table Of Contents 產生目錄索引 (&G) Get Image... 匯入影像... Get Text... 匯入文字... Get Vector File... 取得向量檔案... Getting Started with Scribus 開始使用 Scribus &Glyph... 符號 (&G)... &Group 群組 (&G) Hair Space &Hyphenate Text 用連字元連字 (&H) &Image Effects 圖像效果 (&I) &Image Frame 圖片框 (&I) I&mage Visible 顯示圖像 (&M) Im&port... 匯入 (&P)... Insert Bezier Curve 插入貝茲曲線 Insert &Bezier Curve 插入貝茲曲線 (&B) Insert &Freehand Line 插入手繪線 (&F) Insert Freehand Line 插入手繪線 Insert Image Frame 插入圖片框 Insert &Image Frame 插入圖片框 (&I) Insert &Line 插入線 (&L) Insert Line 插入線 Insert Link Annotation 插入連結註釋 Insert Non Breaking Dash 插入不間斷破折號 Insert Non Breaking Space 插入不間斷空格 Insert Page Number 插入頁碼 Insert PDF Check Box 插入 PDF 核取方塊 Insert PDF Combo Box 插入 PDF 選擇方塊 Insert PDF List Box 插入 PDF 清單方塊 Insert PDF Push Button 插入 PDF 按鈕 Insert PDF Text Field 插入 PDF 文字框 Insert Polygon 插入多邊形 Insert &Polygon 插入多邊形 (&P) Insert &Render Frame Insert Shape 插入形狀 Insert &Shape 插入形狀 (&S) Insert Smart Hyphen 插入智慧型連字元 Insert Table 插入表格 Insert T&able 插入表格 (&A) Insert Text Annotation 插入文字註釋 Insert &Text Frame 插入文字框 (&T) Insert Text Frame 插入文字框 Insert Unicode Character Begin Sequence &Insert... 插入 (&I)... Is &Locked 鎖定 (&L) Is PDF A&nnotation 爲 PDF 注釋 (&N) Is PDF &Bookmark 爲 PDF 書籤 (&B) &Item Action Mode 物件動作模式 (&I) &JavaScripts... &JavaScripts... &Layers 圖層 (&L) &Left 左 (&L) &Line 線條 (&L) &Line Styles... 線條樣式 (&L)... Link Text Frames 串聯文字框 Low Double Comma Unicode 0x201E 下雙逗號 Low Double Comma 下雙逗號 &Low Resolution 低解析度 (&L) Low Single Comma Unicode 0x201A 下單逗號 Low Single Comma 下單逗號 &Lower 降低 (&L) Lower to &Bottom 降低到底部 (&B) Manage &Guides... 管理參考線 (&G)... &Manage Images 管理圖片 (&M) Manage Page Properties... 管理頁面屬性... &Manage Pictures 管理圖片 (&M) &Master Pages... 主頁 (&M)... &Measurements 測量 (&M) Mid Space Middle Dot 中間點 More Info... 更多資訊... &Move... 移動 (&M)... &Multiple Duplicate 多重複製 (&M) &New 新建 (&N) New Line 新建線條 Non Breaking Dash 不間斷破折號 Non Breaking &Space 不間斷空格 (&S) &Normal 普通 (&N) &Normal Resolution 正常解析度 (&N) Number of Pages 頁面數 &Open... 打開 (&O)... &Other... 其他 (&O)... &Outline Document Outline Palette 輪廓 (&O) &Outline 輪廓 (&O) &Outline type effect 輪廓 (&O) &Outlines 輪廓 (&O) &Outlines Convert to oulines 輪廓 (&O) Page &Number 頁碼 (&N) &Paragraph Styles... 段落樣式 (&P)... &Paste 貼上 (&P) Paste (&Absolute) 絕對貼上 (&A) P&DF Tools P&DF 工具 &Polygon 多邊形 (&P) P&references... 偏好設定 (&R)... Preflight &Verifier 印前檢驗器 (&V) Preview Mode 預覽模式 Print Previe&w 預覽列印 (&W) &Print... 列印 (&P)... &Printing Enabled 允許列印 (&P) &Properties 屬性 (&P) &Quit 退出 (&Q) Quotation Dash 引用破折號 &Raise 升高 (&R) Raise to &Top 升高到頂部 (&T) &Redo 重做 (&R) Registered Trademark 注冊商標 Replace Colors... 取代顏色... Re&vert to Saved 恢復到已儲存 (&V) &Right 右 (&R) Rotate Item 旋轉物件 Rulers relative to Page 尺規相對應於頁面 Rulers Relative to Page 尺規相對應於頁面 Sample Text 範例文字 &Save 儲存 (&S) Save as &EPS... 儲存爲 EPS (&E)... Save as P&DF... 儲存爲 PDF (&D)... Save &As... 另存新檔 (&A)... Save Page as &EPS... 儲存頁面爲 EPS (&E)... Save &Text... 儲存文字 (&T)... &Scrapbook 剪貼簿 (&S) Scribus Homepage Scribus 首頁 Scribus &Manual... Scribus 使用手冊 (&M)... Scribus Online Documentation Scribus 線上文件 Scribus Wiki Scribus Wiki &Search/Replace... 尋找 / 取代 (&S)... Select &All 全選 (&A) Select Item 選擇物件 Send to S&crapbook 傳送到寄存本 (&C) S&hadow 陰影 (&H) &Shape 形狀 (&S) Show &Baseline Grid 顯示底線網格 (&B) Show Bleeds 顯示出血 Show Context Menu 顯示內容目錄 Show Control Characters 顯示控制字元 Show &Frames 顯示框體 (&F) Show &Grid 顯示網格 (&G) Show G&uides 顯示參考線 (&U) Show &Images 顯示圖片 (&I) Show Layer Indicators 顯示圖層指示 Show &Margins 顯示頁面邊距 (&M) Show Rulers 顯示尺規 Show &Text Chain 顯示文字鏈 (&T) Show Text Frame Columns 顯示文字框的欄 Single Left Unicode 0x2018 單面左邊 Single Left 單面左邊 Single Left Guillemet Unicode 0x2039 左單引號 Single Left Guillemet 左單引號 Single Reversed 單面反轉 Single Reversed Unicode 0x201B 單面反轉 Single Right Unicode 0x2019 單面右邊 Single Right 單面右邊 Single Right Guillemet Unicode 0x203A 右單引號 Single Right Guillemet 右單引號 Si&ze is Locked 鎖定尺寸 (&Z) Small &Caps 小寫 (&C) Smart &Hyphen 智慧連字元 (&H) Sn&ap to Grid 吸附到網格 (&A) Sna&p to Guides 吸附到參考線 (&P) Solidus 斜線 Split &Polygons 分離多邊形 (&P) st Sticky Tools 黏性工具 Straight Double Unicode 0x0022 雙倍直線 Straight Double 雙倍直線 &Strike Through 刪除線 (&S) S&tyles... 樣式 (&T)... Su&bscript 下標 (&B) Su&perscript 上標 (&P) T&able 表格 (&A) &Tabulators... 跳位字元 (&T)... &Text Frame 文字框 (&T) Thick Space Thin Space &Thumbnails 縮圖 (&T) &Tile 平鋪 (&T) Toggle Guides 切換參考線 Toggle Palettes 切換色板 &Tools 工具 (&T) Toolti&ps 提示 (&P) Trademark 商標 &Underline 底線 (&U) Underline &Words 增加底線 (&W) &Undo 復原 (&U) &Ungroup 取消群組 (&U) Unlink Text Frames 解除串聯文字框 &Update Image 刷新圖片 (&U) Zero Width NB Space &Zero Width Space Zoom in 放大 Zoom in or out 放大或縮小 Zoom out 縮小 Adjust Image to Frame Paste Image from Clipboard 從剪貼簿貼上圖片 Colors and Fills... Marks... Notes Styles... &Transform Adjust Group Patterns Inline Items Insert Rows... Insert Columns... Delete Rows Delete Columns Merge Cells Split Cells... Set Row Heights... Set Column Widths... Distribute Rows Evenly Distribute Columns Evenly Adjust Frame to Table Adjust Table to Frame Adjust Frame Height to Text Embed Image &Symbol Unweld items Weld items Edit weld item &Frames... Anchor Mark Variable Text Reference to Item Reference to Mark Foot/Endnote Edit Mark Update Marks Snap to Items Symbols Unlink Text Frame with Text Copy Unlink Text Frame with Text Cut Insert Arc Insert Spiral Insert Calligraphic Line Insert PDF Radio Button Insert 3D Annotation &Update Document Soft &Hyphen File 檔案 &File 檔案 (&F) Edit 編輯 &Edit 編輯 (&E) Style 樣式 &Style 樣式 (&S) Item 物件 &Item 物件 (&I) Insert 插入 I&nsert 插入 (&N) Page &Page 頁面 (&P) View 檢視 &View 檢視 (&V) Table &Table Extras E&xtras Windows 視窗 &Windows 視窗 (&W) Help 說明 &Help 說明 (&H) Plugin Menu Items Others 其他 Unicode Characters 萬國碼字元 Move/Resize Value Indicator New &from Template... 從範本新建 (&F)... AdjustCmsDialog CMS Settings CMS 設定 AlignDistribute ... ... Align 對齊 DockWidget &Align Sides By: &Distance: 間距 (&D): Reverse Distribution Swap Distribute 分佈 &Relative To: 對應於 (&R): &Selected Guide: 已選參考線 (&S): AlignDistributePalette <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> Align 對齊 Align and Distribute 對齊和分佈 &Align Sides By: Align bottoms 底部對齊 Align bottoms of items to top of anchor 將項目的底部對齊錨點的頂部 When distributing by a set distance, reverse the direction of the distribution of items Swap items to the left Swap items to the right Align bottoms of objects to top of anchor 物件底部和錨點頂部對齊 Align left sides 左邊對齊 Align left sides of items to right side of anchor 將項目的左邊對齊錨點的右邊 Align left sides of objects to right side of anchor 物件的左邊和錨點的右邊對齊 Align right sides 右邊對齊 Align right sides of items to left side of anchor 將項目的右邊對齊錨點的左邊 Align right sides of objects to left side of anchor 物件的右邊和錨點的左邊對齊 Align tops 頂部對齊 Align tops of items to bottom of anchor 將項目的頂部對齊錨點的底部 Align tops of objects to bottom of anchor 物件頂部和錨點底部對齊 Center on horizontal axis 以水平軸居中 Center on vertical axis 以垂直軸居中 &Distance: 間距 (&D): Distribute 分佈 Move 移動 Resize 縮放 <qt>When aligning one side of an item do one of the following:<ul><li>Always move the other side too (preserve existing width and height)</li><li>Keep the other side fixed (resize the item instead of moving it) whenever possible</li></ul></qt> Distribute bottoms equidistantly 底部等距分佈 Distribute centers equidistantly horizontally 中間水平等距分佈 Distribute centers equidistantly vertically 中間垂直等距分佈 Distribute left sides equidistantly 左邊等距分佈 Distribute right sides equidistantly 右邊等距分佈 Distribute the items with the distance specified 按指定的間距分佈物件 Distribute tops equidistantly 頂部等距分佈 First Selected 先選擇 Guide 參考線 Last Selected 後選擇 Make horizontal gaps between items and sides of page equal 讓項目和頁面邊緣的水平間距相等 Make horizontal gaps between items and sides of page margins equal Make horizontal gaps between items equal 讓項目水平間距相等 Make horizontal gaps between items equal to the value specified 讓項目水平間距相等於指定值 Make horizontal gaps between objects equal 讓物件水平間距相等 Make horizontal gaps between objects equal to the value specified 讓物件水平間距和指定值相等 Make vertical gaps between items and the top and bottom of page equal 讓項目和頁面頂部及底部的垂直間距相等 Make vertical gaps between items and the top and bottom of page margins equal Make vertical gaps between items equal 讓項目垂直間距相等 Make vertical gaps between items equal to the value specified 讓項目垂直間距相等於指定值 Make vertical gaps between objects equal 讓物件垂直間距相等 Make vertical gaps between objects equal to the value specified 讓物件垂直間距和指定值相等 Margins 邊距 None Selected 沒有選定 Page &Relative to: 對應於 (&R): &Selected Guide: 已選參考線 (&S): Selection 選擇 Some objects are locked. 某些物件被鎖定 The location of the selected guide to align to &Unlock All 全部解除鎖定 (&U) X: %1%2 X: %1%2 Y: %1%2 Y: %1%2 AlignSelect Align Text Center 文字置中對齊 Align Text Forced Justified 強制文字兩端對齊 Align Text Justified 文字兩端對齊 Align Text Left 文字靠左對齊 Align Text Right 文字靠右對齊 Annot pt pt Action 動作 and less or equal to: 而且小於或等於: Appearance 外觀 average 平均 Beveled 斜面 Border Button 按鈕 Calculate 計算 Cancel 取消 Change... 更改... Characters 字元 Check 勾選 Check Box 勾選框 Check Style: 勾選樣式: Circle 圓形 Color: 顔色: Combo Box 多選框 Cross 十字 Custom 自定義 Custom calculation script: 自定計算 Script: Custom Scripts 自定 Script Custom validate script: 自定驗證 Script: Dashed Date 日期 Date Format 日期格式 Decimals: 小數位: Default is Checked 預設已勾選 Destination 目的地 Diamond 寶石 Do Not Export Value 不要輸出值 Do Not Scroll 不要捲動 Do Not Spell Check 不要拼寫檢查 Don't Export Value 不要輸出值 Edit... 編輯... Editable 可編輯 Enter a comma separated list of fields here 在此輸入以逗號隔開的域列表 Event: 事件: Example: 範例: Export absolute Filename 輸出絕對檔案名 Field is formatted as: 域格式化爲: Field Properties 域屬性 Flag is ignored for PDF 1.3 選項被PDF 1.3所忽略 Font for use with PDF 1.3: 用於 PDF 1.3 的字體: Format 格式 Format: 格式: Formatting 格式 Go To 轉到 Hidden 隱藏 Highlight 高亮 Icon Placement... 圖示位置... Icons 圖示 Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) 圖片 (*.tif *.png *.jpg *.xpm);;%1;;全部檔案 (*) Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) 圖片 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;全部檔案 (*) Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) 圖片 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全部檔案 (*) Import Data 匯入資料 Import Data from: 匯入資料: Inset 凹入 Invert 反轉 JavaScript JavaScript Keystroke: 按鍵: Limit of 限制於 List Box 列舉框 maximum 最大值 minimum 最小值 Mouse Down 滑鼠下移 Mouse Enter 滑鼠進入 Mouse Exit 滑鼠退出 Mouse Up 滑鼠上移 Multi-Line 多行 Name: 名稱: No Print 不可列印 No View 不可檢視 None None highlight None action Normal 正常 Number 數位 Number Format 數位格式 of the following fields: 下面域: OK 確定 On Blur 模糊 On Focus 聚焦 Open 打開 Options 選項 Other 其他 Outlined 概要 Page: 頁: Password 密碼 PDF Files (*.pdf);;All Files (*) PDF 檔案 (*.pdf);;全部檔案 (*) Percent Format 百分數格式 Percentage 百分數 Pick... 選擇... Plain Prepend Currency Symbol 預設貨幣符號 Pressed 按下 product 相乘 Properties 屬性 Push Read Only 唯讀 Remove 移除 Required 必需 Reset Form 清空表單 Roll Over 滑鼠經過 Script: Script: Selection Change 選擇更改 Solid Square 方形 Star 星星 Style: 樣式: Submit Data as HTML 以 HTML 來傳送資料 Submit Form 提交表單 Submit to URL: 傳送到 URL: sum 求和 Text 文本 Text Field 文本域 Text for Button Down 按鈕下陷文本 Text for Roll Over 滑鼠經過文本 Thin Time 時間 Time Format 時間格式 To File: 到檔案: Tooltip: 工具提示: Tool-Tip: 工具提示: Type: 類型: Underline 底線 Use Currency Symbol 使用貨幣符號 Use Icons 使用圖示 Validate 驗證 Value is not calculated 沒有計算值 Value is not validated 爲驗校值 Value is the 值是 Value must be greater than or equal to: 值必須大於或等於: Visibility: 可見度: Visible 可見 Wide Width: 寬度: X-Pos: X-座標: You need at least the Icon for Normal to use Icons for Buttons 你最起碼需要用於普通的圖示來使用按鈕的圖示 Y-Pos: Y-座標: Submit format: 提交格式: FDF FDF HTML HTML XFDF XFDF PDF PDF Annota pt pt %1;;All Files (*) %1;;全部檔案 (*) Annotation Properties 注釋屬性 C&hange... 更改 (&H)... Destination 目的地 Export absolute Filename 輸出絕對檔案名 External Link 外部鏈結 External Web-Link 外部網頁鏈結 Link 鏈結 Open 打開 &Page: 頁面 (&P): PDF-Documents (*.pdf);;All Files (*) PDF 檔案 (*.pdf);;全部檔案 (*) Text 文字 &Type: 類型 (&T): Options 選項 Icon: Note Comment Key Help 說明 NewParagraph Paragraph Insert 插入 Cross 十字 Circle 圓形 Annotation is Open &X-Pos X-座標 (&X) &Y-Pos: Y-座標 (&Y): ApplyMasterPageDialog &All pages 全部頁面 (&A) Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+E Alt+E Alt+O Alt+O Alt+P Alt+P Alt+W Alt+W Apply Master Page 套用主頁 Apply the selected master page to even, odd or all pages within the following range 在以下的範圍內套用所選的主頁到偶數頁, 奇數頁或者全部頁面 Apply the selected template to even, odd or all pages within the following range 在以下的範圍內套用所選的模板到偶數頁, 奇數頁或者全部頁面 Apply To 套用到 Current &page 目前頁面 (&P) &Even pages 偶數頁面 (&E) &Master Page: 主頁 (&M): Normal 普通 O&dd pages 奇數頁面 (&D) Possible Hyphenation 可能的連字元 to &Within range 在範圍內 (&W) Apply to 套用到 Current &Page 目前頁面 (&P) &Even Pages 偶數頁面 (&E) O&dd Pages 奇數頁面 (&D) &All Pages 全部頁面 (&A) &Within Range 在範圍內 (&W) ArcVectorBase Edit Arc Start Angle: End Angle: Height: 高度: Width: 寬度: End Edit ArcWidgetBase Form Start Angle: End Angle: Sample Polygon 多邊形樣本 ArrowChooser None AspellPlugin 0.1 0.1 Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text. 透過 aspell 增加拼字檢查支援。可選擇的語言基於所安裝的字典。拼字檢查可以即時, 或是在選擇文字時完成。 Spell Checker 拼字檢查器 Spell-checking support 拼字檢查支援 Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text. Aspell Plugin Error 拼字檢查插件錯誤 AspellPluginBase Active dictionary: 啟用的字典: &Add Word 增加單字 (&A) &Change 更改 (&C) C&hange All 全部更改 (&H) &Exit 退出 (&E) Mis-spelling: 拼字錯誤: Personal Dictionary 個人的 字典 Replacement: 取代: &Skip 跳過 (&S) S&kip All 全部跳過 (&K) Spell Check 拼字檢查 Not in Dictionary: 不在字典中: Word that was not found in the active dictionary 單字在目前啟用的字典中找不到 Replacement text for the current word that was not found in the dictionary 要取代目前單字的文字在字典中找不到 Active Dictionary: 啟用字典: The currently active dictionary. Scribus uses Aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. Ignore the current text not found in the active dictionary &Ignore 忽略 (&I) Ignore all occurrences of the current text not found in the active dictionary I&gnore All 全部忽略 (&G) Add the current word to the your personal spelling dictionary for future use 增加目前的單字到個人的拼字字典中以便未來使用 Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll 全部更改 (&L) Close 關閉 AspellPluginImpl aspell dictionary. aspell 字典。 by adding it to the session list. 增加它到會話清單。 aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration. aspell插件 (AspellPluginImpl::AspellPluginImpl): aspell 拼字器設定錯誤。 aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller. aspell插件 (AspellPluginImpl::AspellPluginImpl): 產生 aspell 拼字器錯誤。 AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. AspellPluginImpl::on_faddWordBtn_clicked(): 無法增加單字到個人的清單。 AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " default 預設 Loaded 已載入 Spell Checker Plugin Failed to Initialise. Configuration invalid Spell Checker Plugin Failed to Initialise. No Aspell dictionaries could be found. Spell-Checker 拼字檢查器 Spell-checking completed. 拼字檢查已完成。 Spell-checking done. 拼字檢查已完成。 Spelling check complete 拼字檢查已完成 Spell Checker 拼字檢查器 No available Aspell dictionaries found. Install some, please. Aspell dictionary. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows 箭頭 Default Shapes 預設形狀 Flow Chart 流程圖 Jigsaw 線鋸 Specials 特別符號 Barcode &Barcode Generator... 條碼產生器 (&B)... &Barcode... 條碼 (&B)... Scribus frontend for Pure Postscript Barcode Writer Scribus 的純 Postscript 條碼輸出前端 Scribus frontend for Pure PostScript Barcode Writer Scribus 的純 Postscript 條碼輸出前端 BarcodeGenerator 11 or 12 digits 11 或 12 位 12 or 13 digits 12 或 13 位 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) 2 digits 2 位 5 digits 5 位 7 or 8 digits 7 或 8 位 8 digits 8 位 Variable number of characters, digits and any symbols. Barcode 條碼 Barcode incomplete 條碼未完成 Error creating preview 產生預覽錯誤 Error opening file: %1 打開檔案時發生錯誤: %1 Select Barcode Type 選擇條碼形式 Select Type 選擇形式 Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of digits Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits and capital letters Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of hexadecimal characters BarcodeGeneratorBase Alt+B Alt+B Alt+G Alt+G Alt+I Alt+I Alt+L Alt+L Alt+N Alt+N Alt+T Alt+T Alt+U Alt+U &Background 背景 (&B) Background color - under the code lines 背景顔色 - 在條碼下面 Barcode 條碼 Barcode Creator 條碼產生器 Co&de: 條碼 (&D): C&ode: 編碼 (&O): Color of the lines in barcode 條碼中線條的顔色 Color of the text and numbers 文字和數字的顔色 Colors 顔色 Draw arrows to be sure of space next the code 畫箭頭確保編碼旁的空位 Format 格式 Generate and include a checksum in barcode 產生並包含檢查碼在條碼中 &Guard whitespace 注意留白 (&G) Hints and help is shown here 這裡顯示提示和求助 If checked, there will be numbers in the barcode too 如果勾選, 在條碼中也會有數位 I&nclude checksum 包含檢查碼 (&N) Incl&ude checksum digit 插入檢查碼數字 (&U) &Include text in barcode 在條碼中包含文字 (&I) Include the checksum digit in the barcode text 在條碼文字中包含檢查碼數字 Insert Barcode 插入條碼 &Lines 線條 (&L) Preview of the result. 72dpi sample. 預覽效果。72dpi 範例。 Reset the barcode samples 重置條碼範例 Select one of the available barcode type here 選擇一個可用的條碼類型 &Text 文字 (&T) The numeric representation of the code itself. See the help message below 代表編碼的數位。參見下面的求助資訊 &Type: 類型 (&T): Incl&ude Checksum Digit 包含檢查碼數字 (&U) I&nclude Checksum 包含檢查碼 (&N) &Guard Whitespace 注意留白 (&G) &Include Text in Barcode Biblio Choose a Directory 選擇一個目錄 Choose a Scrapbook Directory 選擇剪貼簿目錄 Choose a scrapbook file to import 選擇要匯入的剪貼簿檔案 &Close 關閉 (&C) Close 關閉 Go up one Directory Import a scrapbook file from Scribus <=1.3.2 Close the selected scrapbook 關閉所選擇的剪貼簿 Copied Items 已複製的項目 Hide Images Hide Vector files Copy To: 複製到: Create a new scrapbook page 建立一個新剪貼簿頁面 Configure the scrapbook Delete 刪除 Hide Directories Open Directories in a new tab Delete Contents 刪除內容 Do you really want to delete all entries? 你真的想要刪除所有輸入的嗎? &File 檔案 (&F) Import an scrapbook file from Scribus <=1.3.2 從 Scribus 版本 <=1.3.2 載入剪貼簿檔案 &Import Scrapbook File... 匯入剪貼簿檔案 (&I)... &Large 大 (&L) Load an existing scrapbook 讀取現有的剪貼簿 &Load... 載入 (&L)... Main 主要 &Medium 中 (&M) Move To: 移動到: Name "%1" is not unique. Please choose another. 名稱 "%1"非唯一 請另選。 &Name: 名稱 (&N): &New 新建 (&N) New Entry 新物件 New Name 新名稱 Object 物件 Paste to Page 貼到頁面 &Preview 預覽 (&P) Rename 重命名 &Save 儲存 (&S) Save as... 另存新檔... Save &As... 另存新檔 (&A)... Save the selected scrapbook 儲存選擇的剪貼簿 Scrapbook 剪貼簿 Scrapbook (*.scs *.SCS) 剪貼簿 (*.scs *.SCS) Scrapbook (*.scs) 剪貼簿 (*.scs) Scrapbooks (*.scs);;All Files (*) 剪貼簿 (*.scs);;所有檔案 (*) &Small 小 (&S) BookMView Bookmarks 書籤 Cancel 取消 Insert Bookmark 插入書籤 Move Bookmark 移動書籤 BookPalette Bookmarks 書籤 ButtonIcon Always 總是 Cancel 取消 Caption above Icon 標題在圖示上面 Caption below Icon 圖示在標題上面 Caption left to Icon 標題在圖示左邊 Caption only 僅標題 Caption overlays Icon 標題覆蓋圖示 Caption right to Icon 標題在圖示右邊 Icon 圖示 Icon only 僅圖示 Icon Placement 圖示位置 Layout: 版面: Never 從不 Non Proportional 不按比例 OK 確定 Proportional 按比例 Reset 重置 Scale How: 如何縮放: Scale: 縮放: When Icon is too big 當圖示太大時 When Icon is too small 當圖示太小時 CMSPrefs Monitor profiles can only be changed when no documents are currently opened. Absolute Colorimetric 絕對比色 &Activate Color Management 啟動色彩管理 (&A) Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. 黑點補償是增加照片對比的方法。 如果你的檔案中有照片, 建議啟用此選項。 &CMYK Images: CMYK 圖片 (&C): &CMYK Pictures: CMYK 圖片 (&C): &CMYK Solid Colors: &CMYK 單色: Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). 你從印表機製造商取得的顏色配置檔案。 這個檔案必須是你印表機特定的, 而且不是一般的配置檔案 (也就是 sRGB)。 Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). 你產生或從製造商取得的顏色配置檔案。 這個檔案必須是你螢幕特定的, 而且不是一般的配置檔案 (也就是 sRGB)。 Convert all colors to printer space 轉換所有顏色到印表機的顏色空間 Default color profile for imported CMYK images 匯入的 CMYK 圖片的預設顔色配置檔案 Default color profile for imported RGB images 匯入的 RGB 圖片的預設顔色配置檔案 Default color profile for solid colors on the page 預設頁面單色的顔色配置文件 Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your monitor. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Default rendering intent for your printer. Unless you know why to change it, Relative Colourimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Images: 圖片: Mark Colors out of &Gamut 標出超出範圍的顔色 (&G) Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. 在螢幕上顯示可能不能正確列印的顔色的方法。 這需要非常精確的配置文件而且僅用於警示之用。 &Monitor: 監視器 (&M): M&onitor: 監視器 (&O): Perceptual 感官 Pr&inter: 印表機 (&I): P&rinter: 印表機 (&R): Relative Colorimetric 相對比色 Rendering Intents 渲染意圖 &RGB Images: RGB 圖片 (&R): &RGB Pictures: RGB 圖片 (&R): &RGB Solid Colors: &RGB 單色: Saturation 飽和度 Sim&ulate Printer on the Screen 在監視器上模擬印表機 (&U) Sol&id Colors: 單色 (&I): &Solid Colors: 單色 (&S): System Profiles 系統配置文件 Use &Blackpoint Compensation 使用黑點補償 (&B) CMSPrefsBase Form &Activate Color Management 啟動色彩管理 (&A) System Profiles 系統配置檔 &RGB Images: RGB 圖片 (&R): Default color profile for imported RGB images 匯入的 RGB 圖片的預設顔色配置檔案 &CMYK Images: CMYK 圖片 (&C): Default color profile for imported CMYK images 匯入的 CMYK 圖片的預設顔色配置檔案 &RGB Solid Colors: &RGB 單色: Default color profile for solid RGB colors on the page 預設頁面的單色 RGB 顏色的顔色配置檔案 &CMYK Solid Colors: &CMYK 單色: Default color profile for solid CMYK colors on the page 預設頁面的單色 CMYK 顏色的顔色配置檔案 Document Options Simulate printer on Screen Monitor Profile &Monitor: 監視器 (&M): Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). 你產生或從製造商取得的顏色配置檔案。 這個檔案必須是你螢幕特定的, 而且不是一般的配置檔案 (也就是 sRGB)。 P&rinter: 印表機 (&R): Document Profiles Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). 你從印表機製造商取得的顏色配置檔案。 這個檔案必須是你印表機特定的, 而且不是一般的配置檔案 (也就是 sRGB)。 Document Rendering Intents Images: 圖片: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: 單色 (&I): Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Enable 'soft proofing' of how your document colours will print, based on the chosen printer profile. Sim&ulate Printer on the Screen 在監視器上模擬印表機 (&U) Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space 轉換所有顏色到印表機的顏色空間 Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. 在螢幕上顯示可能不能正確列印的顔色的方法。 這需要非常精確的配置文件而且僅用於警示之用。 Mark Colors out of &Gamut 標出超出範圍的顔色 (&G) Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. 黑點補償是增加照片對比的方法。 如果你的檔案中有照片, 建議啟用此選項。 Use &Blackpoint Compensation 使用黑點補償 (&B) CMYKChoose % % B: B: C: C: Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. CMYK CMYK Color &Model 顔色類型 (&M) Scribus Swatches User Swatches Dynamic Color Bars 動態顔色條 Edit Color 編輯顔色 G: G: HSV-Colormap HSV-顔色表 If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. Is Registration Color 是記錄顔色 Is Spot Color 是專色 K: K: M: M: Name of the color is not unique 顔色名稱不唯一 &Name: 名稱 (&N): New None Old R: R: RGB RGB Static Color Bars 靜態顔色條 The name of the color already exists, please choose another one. Web Safe RGB 網頁安全 RGB Y: Y: You cannot create a color named "%1". It is a reserved name for transparent color 你不能生成一個叫 "%1"的顔色。 這個是給透明色預留的名字 You cannot create a color without a name Please give it a name HSV Color Map CWDialog % % Alt+C Alt+C Alt+M Alt+M Alt+R Alt+R Angle: 角度: B: B: C: C: &Cancel 取消 (&C) Click the wheel to get the base color. Its color model depends on the chosen tab. CMYK CMYK CMYK: CMYK: Color %1 appended. 顔色 %1 已追加。 Color %1 exists already! 顏色 %1 已經存在! Color Merging 混合顔色 Color Scheme Method Color Wheel 顔色轉盤 Colors of your chosen color scheme. Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Document 檔案 Error: 錯誤: G: G: H: H: HSV HSV HSV: HSV: K: K: Leave colors untouched Leave colours untouched M: M: &Merge 混合 (&M) Merge created colors into the document colors Merge created colours into the document colours Merging colors 混合顔色 Now opening the color manager. 現在正在打開顏色管理器。 Preview: 預覽: R: R: &Replace 取代 (&R) Replace created colors in the document colors Replace created colours in the document colours Result Colors RGB RGB RGB: RGB: S: S: Sample color scheme. Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. 找不到要求的顏色。你可能選擇了黑色, 灰色或是白色。沒有處理這個顏色的方式。 V: V: Vision Defect Type: Y: Y: Canvas X: %1 Y: %2 X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 長度: %1 角度: %2 Width: %1 Height: %2 寬: %1 高: %2 Angle: %1 CanvasMode_EyeDropper The selected color does not exist in the document's color set. Please enter a name for this new color. 所選的顔色在檔案的顔色組合中不存在。請爲這個新顔色輸入一個名字。 Color Not Found 找不到顏色 The name you have selected already exists. Please enter a different name for this new color. 你爲新顔色選擇的名稱已經存在。請輸入一個新名稱。 CanvasMode_FrameLinks Linking Text Frames 串聯文字框 Before After CanvasMode_Normal Go to Page %1 Go to URL %1 Go to Page %1 in File %2 Overflow Characters: %1 Page %1 does not exist! Link Target is Web URL. URL: %1 Information 資訊 Link Target is external File. File: %1 Page: %2 All Supported Formats 所有支援的格式 Open 打開 CellStyleComboBox No Style 沒有樣式 CgmPlug Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Group%1 群組%1 Generating Items ChTable You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one 如果你長按滑鼠右鍵, 你能看到一個縮圖。插入鍵插入一個符號到所選擇的下面, 刪除鍵刪除最後插入的符號。 CharSelect Arabic 阿拉伯字元 Arabic Extended A 阿拉伯字元擴展 A Arabic Extended B 阿拉伯字元擴展 B Arrows 箭頭 Basic Latin 基本拉丁 Block Elements 區塊元素 Box Drawing 方盒繪圖 Cannot write file %1 無法寫入檔案 %1 Character Class: 字元類: Character Palette 字元調色板 Choose a filename to open 選擇要開啟的檔案名 Choose a filename to save under 選擇要儲存的檔案名 C&lear 清除 (&L) &Close 關閉 (&C) Close this dialog and return to text editing 關閉此對話框並返回編輯文字 Close this dialog and return to text editing. 關閉對話框並返回到文字編輯。 Currency Symbols 貨幣符號 Cyrillic 斯拉夫字元 Cyrillic Supplement 斯拉夫字元附錄 Delete the current selection(s). 刪除目前選擇的。 Dingbats 裝飾符 Empty the Palette? 清空調色版? Error 錯誤 Error reading file %1 - file is corrupted propably. 載入檔案 %1 時發生錯誤, 檔案可能已損毀。 Font: 字體: Full Character Set 完全字元集 General Punctuation 一般標點符號 Geometric Shapes 幾何圖形 Greek 希臘字元 Greek Extended 擴展希臘字元 Hebrew 希伯來字元 Hide/Show Enhanced Palette &Insert 插入 (&I) Insert the characters at the cursor in the text 在文字的游標處插入字元 Latin Extended-A 拉丁擴展-A Latin Extended-B 拉丁擴展-B Latin-1 Supplement 拉丁-1 附錄 Letterlike Symbols 類似字母符號 Ligatures 連字 Mathematical Operators 數學運算符 Miscellaneous Symbols 各種符號 Number Forms 數位形式 Scribus Char Palette (*.ucp);;All Files (*) Scribus Char Palette (*.ucp);;All Files (*) Select Character: 選擇字元: Small Form Variants 小形狀變體 Specials 特別符號 Super- and Subscripts 上標和下標 You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one 如果你長按滑鼠右鍵, 你能看到一個縮圖。插入鍵插入一個符號到所選擇的下面, 刪除鍵刪除最後插入的符號 You will remove all characters from this palette. Are you sure? Save Quick Character Palette CharSelectEnhanced Full Character Set 完整字元集 Basic Latin 基本拉丁 Latin-1 Supplement 拉丁-1 附錄 Latin Extended-A 拉丁擴展-A Latin Extended-B 拉丁擴展-B General Punctuation 一般標點符號 Super- and Subscripts 上標和下標 Currency Symbols 貨幣符號 Letterlike Symbols 類似字母符號 Number Forms 數位形式 Arrows 箭頭 Mathematical Operators 數學運算符 Box Drawing 方盒繪圖 Block Elements 區塊元素 Geometric Shapes 幾何圖形 Miscellaneous Symbols 各種符號 Dingbats 裝飾符 Small Form Variants 小形狀變體 Ligatures 連字 Specials 特別符號 Greek 希臘字元 Greek Extended 希臘字元擴展 Cyrillic 斯拉夫字元 Cyrillic Supplement 斯拉夫字元附錄 Arabic 阿拉伯字元 Arabic Extended A 阿拉伯字元擴展 A Arabic Extended B 阿拉伯字元擴展 B Hebrew 希伯來字元 Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Glyphs to Insert Insert the characters at the cursor in the text 在文字的游標處插入字元 &Insert 插入 (&I) Delete the current selection(s). 刪除目前選擇的。 C&lear 清除 (&L) Type in a four digit Unicode value directly here CharStyleComboBox No Style 沒有樣式 CharTableView Delete 刪除 CheckDocument Annotation uses a non TrueType font 註釋使用的不是 True Type 字體 Blendmode used 使用混合模式 Check again 再次檢查 Current Profile: 目前的配置文件: Document 檔案 Empty Image Frame 清空圖片框 Free Objects 自由物件 Glyphs missing 符號遺失 &Ignore Errors 忽略錯誤 (&I) Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. 忽略發現的錯誤並繼續匯出或是列印。確定你瞭解忽略的錯誤之後再繼續。 Image has a DPI-Value less than %1 DPI 圖片的 DPI 值低於 %1 DPI Image is GIF 圖片是 GIF 檔 Image resolution above %1 DPI, currently %2 x %3 DPI 圖片解析度高於 %1 DPI, 現在是 %2 x %3 DPI Image resolution below %1 DPI, currently %2 x %3 DPI 圖片解析度低於 %1 DPI, 現在是 %2 x %3 DPI Items 物件 Layer "%1" 圖層 "%1" Missing Image 圖片遺失 No Problems found 沒有發現問題 Object has transparency 物件有透明度 Object is a PDF Annotation or Field 物件是一個 PDF 注釋或域 Object is a placed PDF 物件是個嵌入的 PDF Object is not on a Page 物件不在頁面上 OK 確定 Page 頁面 Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Preflight Verifier 印前檢驗器 Problems 問題 Problems found 發現問題 Rerun the document scan to check corrections you may have made Text overflow 文字溢出 Transparency used 已使用透明度 After Marks update document was changed Layers 圖層 Print/Visible Mismatch Issue(s): %1 Master Pages 主頁 Layer 圖層 Image resolution below %1 DPI, currently %2 x %3 DPI 圖片解析度低於 %1 DPI, 目前是 %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI 圖片解析度高於 %1 DPI, 目前是 %2 x %3 DPI Image dimension is smaller than its frame ChooseStyles Available Styles 可用樣式 Choose Styles 選擇樣式 ClockWidget A A CollectForOutput Cannot collect all files for output for file: %1 不能收集所有文件來輸出文件: %1 Cannot collect the file: %1 不能收集文件: %1 Choose a Directory 選擇一個目錄 Cannot create directory: %1 Collecting... 收集中... Warning 警告 CollectForOutput_UI Collecting Items: Collecting Patterns: Collecting Fonts: Collecting Profiles: Collecting... 收集中... Cannot collect all files for output for file: %1 不能收集所有文件來輸出文件: %1 Cannot collect the file: %1 不能收集文件: %1 ColorListBox Sort by Name 按名稱排序 Sort by Color Sort by Type ColorManager All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) 所有支援的格式 (%1);;檔案 (%2);;其他檔案 (%3);;全部檔案 (*) Choose a color set to load 選擇要載入的顔色組合 Choose a Name 選擇一個名稱 Color Sets 顔色組合 Colors 顔色 Copy of %1 複製 %1 Create a new color within the current set 在目前的顏色組合中建立一個新的顏色 Current Color Set: 目前顔色組合: &Delete 刪除 (&D) Delete the currently selected color 刪除目前選取的顏色 Documents (*.sla *.scd);;All Files (*) 檔案 (*.sla *.scd);;全部文件 (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 檔案 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*) D&uplicate 複製 (&U) &Edit 編輯 (&E) Edit the currently selected color 編輯目前選取的顏色 &Import 匯入 (&I) Import 匯入 Import colors to the current set from an existing document 從現有的檔案中匯入顔色組合到目前的組合 Information 資訊 Make a copy of the currently selected color 複製目前選取的顏色 Make the current colorset the default color set 將目前的顏色組合設定為預設的顏色組合 &Name: 名稱 (&N): &New 新建 (&N) New Color 新顔色 Open 打開 &Remove Unused 清除未用的 (&R) Remove unused colors from current document's color set 從目前檔案顔色組合清除未用顔色 &Save Color Set 儲存顔色組合 (&S) Save the current color set 儲存目前的顔色組合 Import Colors 匯入顏色 ColorWheel 1st. Analogous 第一個相似的 1st. Split 第一個拆分 2nd. Analogous 第二個相似的 2nd. Split 第二個拆分 3rd. Split 第三個拆分 4th. Split 第四個拆分 Analogous 相似的 Base Color 基本顔色 Complementary 補充的 Monochromatic 單色的 Monochromatic Dark 單色暗 Monochromatic Light 單色亮 Split Complementary 拆分補充的 Tetradic (Double Complementary) 四分的(雙補充的) Triadic 三合一的 ColorWheelDialog Angle (0 - 90 degrees): 角度 (0 - 90 度): C C Click the wheel to get the base color. It is hue in HSV mode. Click the wheel to get the base colour. It is hue in HSV mode. Color 顔色 C&olor 顔色 (&O) Color %1 appended. 顔色 %1 被追加。 Color %1 exists already! 顏色 %1 已經存在! C&olor Components... 顏色組成 (&C)... Color Merging Colour Merging Color Wheel 顔色轉盤 Colors of your chosen color scheme 你所選顔色組合的顔色 Cr&eate color... Cr&eate colour... Deuteranopia (Green) Deuteranopia (Green) Difference between the selected value and the counted ones. Refer to documentation for more information. Difference between the selected value and the counted ones. Refer to documentation for more information. Error: 錯誤: E&xit 退出 (&X) Full Color Blindness Full Colour Blindness &Import existing color... &Import existing colour... K K Leave colors untouched Leave colours untouched M M &Merge colors 混合顔色 (&M) &Merge Colors 混合顔色 (&M) Merge created colors into the document colors Merge created colours into the document colours Merging colors Merging colours Name 名稱 New Color 新顔色 Normal Vision Normal Vision Now opening the color manager. Now opening the colour manager. Protanopia (Red) Protanopia (Red) &Replace colors 取代顏色 (&R) &Replace Colors 取代顏色 (&R) Replace created colors in the document colors Replace created colours in the document colours Sample color scheme Sample colour scheme Select Method: 選擇方式: Select one of the methods to create a color scheme. Refer to documentation for more information. Select one of the methods to create a colour scheme. Refer to documentation for more information. Simulate common vision defects here. Select type of the defect. Simulate common vision defects here. Select type of the defect. Tritanopia (Blue) Tritanopia (Blue) Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour. Vision Defect: Vision Defect: Y Y ColorWheelPlugin Color selector with color theory included. Colour selector with colour theory included. Color setting helper 顏色設定說明 &Color Wheel... 顔色轉盤 (&C)... ColumnResize Width 寬度 CommonStrings 3-Fold 3折 4-Fold 4折 &Apply 套用 (&A) April 四月 August 八月 &Cancel 取消 (&C) CMYK Colorspace CMYK Custom CommonStrings, custom page size 自定 Custom: Custom Tab Fill Option 自定: Dash Dot Dot Line 虛點點線 Dash Dot Line 虛點線 Dashed Line 虛線 December 十二月 Default Optical Margin Setting 預設 Default Character Style 預設字元樣式 Default Line Style 預設線條樣式 Default Paragraph Style 預設段落樣式 Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranopia (Green) Dotted Line 點線 Double Sided 雙邊 Duotone Colorspace February 二月 Friday 星期五 Full Color Blindness Color Blindness - Full Color Blindness Full Colour Blindness Grayscale Colorspace 灰度 Image Frame 圖片框 January 一月 July 七月 June 六月 Left Hanging Punctuation Optical Margin Setting Left Page 左頁 Left Page Left page location 左頁 Left Protruding Optical Margin Setting Line 線條 March 三月 Max. Glyph Extension Max. Word Tracking May 五月 Middle 中間 Middle Middle page location 中間 Middle Left 中左 Middle Left Middle Left page location 中左 Middle Right 中右 Middle Right Middle Right page location 中右 Min. Glyph Extension Min. Word Tracking Monday 星期一 Multiple Multiple frame types &No 否 (&N) No None None color name None Optical Margin Setting Normal 普通 Normal Default single master page 普通 Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Normal Vision November 十一月 October 十月 &OK 確定 (&O) PDF Check Box PDF 核取方塊 PDF Combo Box PDF 選擇方塊 PDF Link Annotation PDF 連結註釋 PDF List Box PDF 清單方塊 PDF Push Button PDF 按鈕 PDF Text Annotation PDF 文字註釋 PDF Text Field PDF 文字框 Polygon 多邊形 Polyline 線套 PDF 3D Annotation Symbol Group 群組 Regular Polygon Arc Spiral Table PDF Radio Button Button 按鈕 RadioButton Textfield Checkbox Combobox Listbox TextAnnot Link 鏈結 Default Table Style Default Cell Style Monochrome Colorspace PostScript PostScript PostScript Level 1 PostScript 級別 1 PostScript Level 2 PostScript 級別 2 PostScript Level 3 PostScript 級別 3 Alt Alt Shift Shift Cmd Ctrl Ctrl Windows 視窗 Meta Meta Protanopia (Red) Color Blindness - Red Color Blind Protanopia (Red) Render Frame RGB Colorspace RGB Right Hanging Punctuation Optical Margin Setting Right Page Right page location 右頁 Right Page 右頁 Right Protruding Optical Margin Setting Saturday 星期六 &Save 儲存 (&S) September 九月 Single Page 單頁 Solid Line 實線 Sunday 星期日 Text Frame 文字框 Text on a Path 路徑上的文字 Thursday 星期四 Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanopia (Blue) Tuesday 星期二 Unknown Colorspace (Unknown) 未知 Warning 警告 Wednesday 星期三 Windows GDI 視窗 GDI &Yes 是 (&Y) Yes ContextMenu Delete Page 刪除頁面 Paste File... 貼上檔案... Preview Settings 預覽設定 Paste Image from Clipboard 從剪貼簿貼上圖片 CopyPageToMasterPageBase Convert Page to Master Page 把頁面轉換爲主頁 Copy Applied Master Page Items 複製已套用的主頁項目 Name: 名稱: CopyPageToMasterPageDialog New Master Page %1 新主頁 %1 Cpalette % % pt pt Angle 角度 Blend Mode: 混合模式: Color 顔色 Color Burn 顔色焦灼 Color Dodge 顔色模糊 Cross Diagonal Gradient Cross Diagonal Gradient Darken 更暗 Diagonal Gradient 對角線梯度 Difference 差分 Edit Fill Color Properties Edit Fill Colour Properties Edit Line Color Properties Edit Line Colour Properties Exclusion 排除 Free linear Gradient Free linear Gradient Free radial Gradient Free radial Gradient Hard Light 強光 Horizontal Gradient 水平梯度 Hue 色調 Lighten 更亮 Luminosity 亮度 Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Move Vector 移動向量 Multiply 倍增 None None Normal 普通 Normal or gradient fill method Normal or gradient fill method Offsets 位移 Opacity: 透明度: Overlay 重疊 Radial Gradient 半徑梯度 Rotation 旋轉 Saturation 飽和度 Saturation of color Saturation of colour Scaling 縮放 Screen 螢幕 Set the transparency for the color selected Set the transparency for the colour selected Shade: 陰影: Soft Light 柔光 Transparency Settings 透明度設定 Vertical Gradient 垂直梯度 X: X: X1: X1: X2: X2: X-Scale: X-縮放: Y: Y: Y1: Y1: Y2: Y2: Y-Scale: Y-縮放: Solid Gradient Pattern Custom Create Mesh CreateMode 3DAnnot CreateRange Add a Range of Pages 增加範圍到頁面 &Add To Range 增加到範圍 (&A) Advanced Reordering Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+L Alt+L Alt+O Alt+O Alt+U Alt+U Basic Range Selection 基本範圍選擇 &Cancel 取消 (&C) Comma Separated List 逗點分隔清單 Consecutive Pages Create Range 建立範圍 De&lete 刪除 (&L) Doc Page Range 檔案頁面範圍 Even Pages 偶數頁面 From: 從: Move &Down 向下移動 (&D) Move &Up 向上移動 (&U) Number of Pages in Document: 檔案中的頁面數: Odd Pages 奇數頁面 &OK 確定 (&O) Page Group Size: Page Order 頁面順序 Range of Pages 頁面的範圍 Sample Page Order: To: 到: CsvDialog (TAB) (TAB) Cancel 取消 CSV Importer Options CSV 匯入器選項 Field delimiter: First row is a header 第一列是標題 None None delimiter OK 確定 Value delimiter: CupsOptions All Pages 全部頁面 Even Pages only 只要偶數頁 Landscape 橫式 Mirror 鏡像 No N-Up Printing N-Up 列印 Odd Pages only 只要奇數頁 Option 選項 Orientation 頁面方向 Page per Sheet 每張紙的頁面 Page Set 頁面套 Pages per Sheet 每張紙的頁面 Portrait 直式 Printer Options 印表機選項 This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * 這個面板顯示列印時 CUPS 的選項。可得的參數將取決於你的印表機驅動程式。你可以選擇說明 > 關於來確定 CUPS 的支援。看看列出的: C-C-T 這些等同於 C=CUPS C=littlecms T=TIFF 支援。 遺失的函式庫支援用 * 標示 Value 數值 Yes CurveWidget Cannot write the file: %1 不能寫入檔案: %1 Curve Files (*.scu);;All Files (*) Curve 檔案 (*.scu);;所有檔案 (*) Inverts the curve 反轉曲線 Loads a curve 載入曲線 Open 打開 Curve Files "*.scu" (*.scu *.SCU);;All Files (*) Resets the curve 重設曲線 Save as 另存新檔 Saves this curve 儲存曲線 Switches between linear and cubic interpolation of the curve CustomFDialog &Compress File 壓縮檔案 (&C) Compress the Scribus document on save 儲存時壓縮 Scribus 的檔案 Encoding: 編碼: &Include Color Profiles 包含顏色配置檔案 (&I) Include color profiles when collecting files for the document &Include Fonts 包括字體 (&I) Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Moves to your Document Directory. This can be set in the Preferences. 移動到你的檔案目錄。 這可以在偏好設定裡設定。 Show a preview and information for the selected file 顯示所選擇檔案的預覽及資訊 Show Preview 顯示預覽 CvgPlug Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Group%1 群組%1 Generating Items CwSetColor B: B: C: C: CMYK CMYK G: G: H: H: HSV HSV K: K: M: M: R: R: RGB RGB S: S: Set C&MYK 設定 CMYK (&M) Set Color Components 設置顔色組成 Set &HSV 設定 HSV (&H) Set &RGB 設定 RGB (&R) V: V: Y: Y: DashEditor Offset: 位移: Value: 數值: DeferredTask Cancelled by user 被使用者取消 DelColor Delete Color 刪除顔色 Delete Color: 刪除顔色: None Replace With: 取代上: DelPages Delete From: 刪除來自: Delete Pages 刪除頁 to: 到: DelStyle Delete Style 刪除樣式 Delete Style: 刪除樣式: No Style 沒有樣式 Replace With: 取代為: DialogsAPI Alert - Scribus DocIm Importing failed 匯入失敗 Importing Word document failed %1 匯入 Word 檔案失敗 %1 DocInfos A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 一個和檔案存在時的某事件相關聯的日期, 以 ISO 8601 標準表示, 格式是年-月-日 A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 賦予檔案的名稱。這個專案可以被嵌入到 Scribus 檔案以及 PDF 檔案中的元資料中備考 A person or organisation responsible for making contributions to the content of the document 負責爲該檔案內容作出貢獻的個人或組織 A person or organisation responsible for making the document available 負責製作該檔案的個人或組織 &Subject: A reference to a document from which the present document is derived, eg. ISBN or URI 一個關於目前檔案怎麽起源的參考,例如ISBN或URI A reference to a related document, possibly using a formal identifier such as a ISBN or URI 一個關於相關檔案的參考,興許使用一個正式的身份標記,例如ISBN或者URI An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export 檔案內容的說明。這個專案是檔案的簡單描述或者摘要。這個在輸出 PDF 檔案時將被嵌入 An unambiguous reference to the document within a given context such as ISBN or URI 一個在特定的上下文裏對檔案的清晰參考,例如ISBN或URI &Author: 作者 (&A): &Contributors: 貢獻者 (&C): Co&verage: 範圍 (&V): Dat&e: 日期 (&E): Descri&ption: 描述 (&P): Documen&t 檔案 (&T) Document Information 檔案資訊 F&ormat: 格式 (&O): Further &Information 更多資訊 (&I) Identi&fier: 身份標記 (&F): Information about rights held in and over the document, eg. copyright, patent or trademark 關於在檔案裏或對檔案擁有的權力,例如版權,專利或者商標 &Keywords: 關鍵字 (&K): &Language: 語言 (&L): P&ublisher: 出版者 (&U): &Relation: 關係 (&R): Ri&ghts: 權利 (&G): &Source: 來源 (&S): The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges 檔案內容的區域或者範圍,可能的話包括地點,時間和管轄範圍 The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH 書寫檔案內容所用的語言,一般上是可能帶橫杠尾碼和一個ISO-3166國家代碼(如en-GB,fr-CH)的ISO-639語言編碼 The nature or genre of the content of the document, eg. categories, functions, genres, etc 檔案內容的性質或流派,例如類別,功能或流派等等 The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF 製作此檔案內容的主要人或組織。這個專案可以被嵌入到 Scribus 檔案以及 PDF 檔案中的元資料中備考 The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files 檔案內容的主題。這個專案是你想嵌入到 PDF 檔案中的關鍵字,以便幫助尋找和檢索 PDF 檔案 &Title: 標題 (&T): T&ype: 類型 (&Y): DocSections 1, 2, 3, ... 1, 2, 3, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... &Add 增加 (&A) Add a page numbering section to the document. The new section will be added after the currently selected section. 增加一個頁碼區域到檔案。這個新區域將被增加到目前選中的區域後面。 Alt+A Alt+A Alt+D Alt+D &Delete 刪除 (&D) Delete the currently selected section. 刪除目前所選擇的區域。 Document Sections 檔案區域 From 來自 i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... Name 名稱 Name: Optional name for section eg. Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. 名稱:區域的可選名稱,例如:Index<br/>Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/>From: The page index for this section to start at.<br/>To: The page index for this section to stop at.<br/>Style: Select the page number style to be used.<br/>Start: The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. Page Number Out Of Bounds 頁碼超出邊界 Shown 顯示 Start 開始 Style 樣式 The value you have entered is outside the range of page numbers in the current document (%1-%2). 你輸入的數值超出了目前檔案的頁面數字範圍 (%1-%2)。 To DocSectionsBase &Add 增加 (&A) Alt+A Alt+A Alt+D Alt+D &Delete 刪除 (&D) Document Sections 檔案區域 From 來自 Name 名稱 Shown 顯示 Start 開始 Style 樣式 To DocumentItemAttributes &Add 增加 (&A) Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+L Alt+L Auto Add To 自動增加到 Boolean 布林 C&lear 清除 (&L) &Copy 複製 (&C) &Delete 刪除 (&D) Document Item Attributes 文件物件特性 Image Frames 圖片框 Integer 整數 Is Child Of 子級於 Is Parent Of 父級于 Name 名稱 None auto add None types None None relationship Parameter 參數 Real Number 實數 Relates To 相關於 Relationship 關係 Relationship To 關係於 String 字串 Text Frames 文字框 Type 類型 Value 數值 DocumentItemAttributesBase &Add 增加 (&A) Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+L Alt+L Auto Add To 自動增加到 C&lear 清除 (&L) &Copy 複製 (&C) &Delete 刪除 (&D) Document Item Attributes 檔案物件特性 Name 名稱 Parameter 參數 Relationship 關係 Relationship To 有關係於 Type 類型 Value 數值 Druck A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Advanced Options 進階選項 All 全部 Allows you to embed ICC profiles in the print stream when color management is enabled Allows you to embed ICC profiles in the print stream when colour management is enabled A&lternative Printer Command 另外的印表機命令 (&L) Apply ICC Profiles 套用 ICC 配置檔案 Apply Under Color Removal 應用底色清除 Black C&hange... 更改 (&H)... Clip to Page Margins 裁切到頁邊 Color 顔色 Co&mmand: 命令 (&M): Convert Spot Colors to Process Colors 把 Spot Colours 轉成 Process Colours Cyan Do not show objects outside the margins on the printed page or exported file Do not show objects outside the margins on the printed page or exported file Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. File 檔案 &File: 檔案 (&F): Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一個以逗號隔開的記號列表, 可以 * 來代表所有頁, 1-5代表頁面的範圍, 或者單獨一個頁碼。 Magenta 洋紅 Mirror Page(s) Horizontal 頁面水平鏡像 Mirror Page(s) Vertical 頁面垂直鏡像 N&umber of Copies: 列印份數 (&U): Options 選項 &Options... 選項 (&O)... Page 頁面 PostScript Files (*.ps);;All Files (*) PostScript 檔案 (*.ps);;全部檔案 (*) PostScript Level 1 PostScript 級別 1 PostScript Level 2 PostScript 級別 2 PostScript Level 3 PostScript 級別 3 Preview... 預覽... &Print 列印 (&P) Print &All 全部列印 (&A) Print Current Pa&ge 列印目前頁面 (&G) Print Destination 列印到 Print in Color if Available 儘量用彩色列印 Print in Grayscale 灰度列印 Print Normal 普通列印 Print &Range 列印範圍 (&R) Print Separations 分色列印 Range 範圍 Save as 儲存爲 Set Media Size 設定介質尺寸 Sets the PostScript Level. Setting to Level 1 or 2 can create huge files 設定 PostScript 級別。 設定成級別 1或 2 可能產生巨大檔案 Setup Printer 設置印表機 This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options 使用其他列印管理器來使用額外的列印選項, 例如 kprinter 或者 gtklp Yellow DrwPlug Group%1 群組%1 Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Generating Items EPSPlug Analyzing PostScript: 分析 PostScript: Converting of %1 images failed! 轉換圖片 %1 失敗! Error 錯誤 Fatal Error 嚴重錯誤 Generating Items 產生物件中 Group%1 群組%1 Importing File: %1 failed! 匯入檔案: %1 失敗! Importing PostScript 匯入 PostScript Importing: %1 正在匯入: %1 EditStyle % % pt pt Align to Baseline Grid 和基線網格對齊 Auto 自動 Automatic Linespacing 自動行距 Background 背景 Character 字元 Color of text fill 文本填充顔色 Color of text stroke 文本輪廓顔色 Determines the gap between the DropCaps and the Text 確定下沈字和文字的間隔 Determines the overall height, in line numbers, of the Drop Caps Determines the overall height, in line numbers, of the Drop Caps Distance from Text: 到文字的距離: Distances 距離 Drop Caps 首字下沈 Edit Style 編輯樣式 Fixed Linespacing 固定行距 Font of selected text or object 所選文字或物件的字體 Font Size 字體大小 Line Spacing 行距 &Lines: 行 (&L): Name of the style is not unique 這個樣式的名稱非唯一 Name of your paragraph style Name of your paragraph style &Name: 名稱 (&N): None Offset to baseline of characters 取消字元的基準線 Preview of the Paragraph Style 預覽段落樣式 Spacing above the paragraph 段落上方的距離 Spacing below the paragraph 段落下方的距離 Tabulators and Indentation 跳位字元和縮進 Toggles sample text of this paragraph style 切換這個段落樣式的文字範例 EditToolBar Edit 編輯 Editor C&lear 清除 (&L) &Copy 複製 (&C) Ctrl+C Ctrl+C Ctrl+N Ctrl+N Ctrl+X Ctrl+X Ctrl+Z Ctrl+Z Ctrl-V Ctrl-V Cu&t 剪下 (&T) &Edit 編輯 (&E) Editor 編輯器 &Exit without Saving 退出但不儲存 (&E) &File 檔案 (&F) &Get Field Names 取得功能變數名稱 (&G) OK Cancel 取消 JavaScripts (*.js);;All Files (*) JavaScripts (*.js);;全部檔案 (*) &New 新建 (&N) &Open... 打開 (&O)... &Paste 貼上 (&P) &Redo 重做 (&R) &Save and Exit 儲存並退出 (&S) Save &As... 另存新檔 (&A)... &Undo 復原 (&U) EffectsDialog << << >> >> Available Effects 可用效果 Blur 模糊 Brightness 亮度 Brightness: 亮度: Cancel 取消 Color 1: 顔色 1: Color 2: 顔色 2: Color 3: 顔色 3: Color 4: 顔色 4: Color: 顔色: Colorize 顔色化 Contrast 對比 Contrast: 對比: Curves 曲線 Duotone Effects in use 使用中效果 Grayscale 灰度 Image Effects 圖片效果 Invert 反轉 OK 確定 Options: 選項: Posterize 海報效果化 Posterize: 海報效果化: Quadtone Radius: 半徑: Shade: 陰影: Sharpen 銳化 Tritone Value: 數值: ExceptHookDialog Script error Script 錯誤 An exception occured while running the script. &Close 關閉 (&C) Exception &Details >> ExportBitmap Error writing the output file(s). 寫入輸出檔案錯誤。 exists already. Overwrite? 已經存在, 要覆蓋嗎? File exists. Overwrite? 檔案已存在, 要覆蓋嗎? Insufficient memory for this image size. 這個圖片尺寸所需的記憶體不足。 Save as Image 另存爲圖片 ExportForm % % dpi dpi &All pages 全部頁面 (&A) Available export formats 可用匯出格式 C C Change the output directory 更改輸出目錄 C&hange... 更改 (&H)... Choose a Export Directory 選擇一個匯出目錄 &Current page 目前頁面 (&C) Export a range of pages 匯出一個頁面範圍 Export all pages 輸出所有頁 Export as Image(s) 匯出成圖片 Export only the current page 僅匯出目前頁面 &Export to Directory: 匯出到目錄 (&E): Image size in Pixels 以化素表示的圖片尺吋 Image &Type: 圖片類型 (&T): Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一個以逗號隔開的記號,這裏記號可以是*以代表所有頁,1-5代表頁範圍或者一個單獨的頁碼。 Options 選項 &Quality: 品質 (&Q): Range 範圍 &Range 範圍 (&R) Resolution of the Images Use 72 dpi for Images intended for the Screen 圖片的解析度。 如果圖片用於螢幕顯示, 用 72 dpi &Resolution: 解析度 (&R): Size of the images. 100% for no changes, 200% for two times larger etc. 圖片尺寸。100% 爲沒有更改, 200% 是兩倍大, 以此類推。 &Size: 尺寸 (&S): TextLabel TextLabel The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' 輸出目錄是儲存你的圖片的地方。 輸出檔案的名稱將會是 '檔案名-頁碼.文件類型' The quality of your images - 100% is the best, 1% the lowest quality 圖片的品質, 100% 爲最好, 1% 爲最低 The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' 你圖片的壓縮率 - 100% 是沒有壓縮, 0% 是最高壓縮。如果有疑問, 使用 "自動" Automatic 自動 ExtImageProps % % Background 背景 Blend Mode: 混合模式: Color 顔色 Color Burn 顔色焦灼 Color Dodge 顔色模糊 Darken 更暗 Difference 差分 Dissolve 溶解 Don't use any Path 不用任何路徑 Exclusion 排除 Exlusion 排除 Extended Image Properties 圖片延伸屬性 Hard Light 強光 Hue 色調 Layers 圖層 Lighten 更亮 Live Preview 即時預覽 Luminosity 亮度 Multiply 倍增 Name 名稱 Normal 普通 Opacity: 透明度: Overlay 重疊 Paths 路徑 Saturation 飽和度 Screen 螢幕 Soft Light 柔光 FDialogPreview Author: 作者: CMYK CMYK Colorspace: 顔色模式: DPI DPI File Format: 檔案格式: Grayscale 灰度 No Title 無標題 Resolution: 解析度: RGB RGB Scribus Document Scribus 檔案 Size: 尺寸: Title: 標題: Unknown 未知 FileLoader was replaced by: 已被替代成: Some fonts used by this document have been substituted: 這個檔案使用的一些字體被替代爲: FileToolBar File 檔案 FlattenPathPlugin Flatten Path Path Tools 路徑工具 Flattens a Path Converts a Bezier Path to a Path made of line segments. FontComboH Family: Style: 樣式: Font Family of Selected Text or Text Frame Font Style of Selected Text or Text Frame FontListModel Access Access Click to change the value Embed in PostScript Family Font Name 字體名稱 Format 格式 Path to Font File 字體檔案的路徑 Style 樣式 Subset 子集 System font preview 系統 Type 類型 Unknown font format 未知 Unknown font type 未知 Use Font 使用字體 Used in Doc User font preview 使用者 Variant FontPrefs A&dd... 增加 (&A)... Additional Paths 其他路徑 Additional &Paths 其他路徑 (&P) &Available Fonts 可用字體 (&A) Available Fonts 可用字體 C&hange... 更改 (&H)... Choose a Directory 選擇一個目錄 &Delete 刪除 (&D) Embed in: font preview 嵌入在: Font Name 字體名稱 Font Name font preview 字體名稱 Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. 字體搜索路徑只能在偏好設定中設定,而且要在沒有打開任何檔案的情況下。關閉所有檔案,然後用編輯-設置來更改字體搜索路徑。 Font Substitutions 字體替代 Font &Substitutions 字體替代 (&S) Path to Font File font preview 字體文件的路徑 PostScript PostScript &Remove 移除 (&R) Replacement 替代 Subset font preview 子集 Use Font font preview 使用字體 FontPrefsTab Available Fonts 可用字體 Font Substitutions 字體替代 Additional Paths 其他路徑 &Available Fonts 可用字體 (&A) Font Name 字體名稱 &Delete 刪除 (&D) Font &Substitutions 字體替代 (&S) C&hange... 更改 (&H)... A&dd... 增加 (&A)... &Remove 移除 (&R) Additional &Paths 其他路徑 (&P) Choose a Directory 選擇一個目錄 FontPreview Access font preview Access Alt+C Alt+C Alt+C font preview Alt+C Alt+O font preview Alt+O Alt+S Alt+S Alt+T Alt+T &Append 追加 (&A) Append selected font into Style, Font menu font preview 追加選中的字體到樣式,字體功能表 &Close font preview 關閉 (&C) &Close 關閉 (&C) &Default 預設 (&D) Doc font preview 文件 Font Name font preview 字體名稱 Font Size: 字體尺寸: &Font Size: 字體大小 (&F): Fonts Preview font preview 字體預覽 Fonts Preview 字體預覽 Leave preview font preview 離開預覽 &Quick Search: 快速尋找 (&Q): Quick Search: 快速尋找: Reset the text 重置文字 Sample text to display 要顯示的文字樣本 &Search 尋找 (&S) Se&t 設定 (&T) Size of the selected font 所選字體的尺寸 Start searching 開始尋找 Subset font preview 子集 System font preview 系統 Text 文本 Type font preview 類型 Typing the text here provides quick searching in the font names. E.g. 'bold' shows all fonts with Bold in name. Searching is case insensitive. 在此輸入字以便快速尋找字體名稱。例如'粗體'顯示所帶有粗體的名稱。尋找大小寫有別 Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. User font preview 用戶 Woven silk pyjamas exchanged for blue quartz font preview Woven silk pyjamas exchanged for blue quartz Show Extended Font Information Set the preview text FontPreviewBase Access Access Alt+C Alt+C &Append 追加 (&A) &Close 關閉 (&C) Doc 檔案 Font Name 字體名稱 &Font Size: 字體大小 (&F): Fonts Preview 字體預覽 &Quick Search: 快速尋找 (&Q): Reset the text 重置文字 Sample text to display 要顯示的文字樣本 &Search 尋找 (&S) Subset 子集 Text 文字 Type 類型 FontPreviewPlugin Font Preview dialog 字體預覽視窗 &Font Preview... 字體預覽 (&F)... Sorting, searching and browsing available fonts. 排列, 尋找和瀏覽可用的字體。 FontReplaceDialog Cancels these font substitutions and stops loading the document. 取消這些字體替代並停止載入檔案。 Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. 啓用這個就告訴 Scribus 永久性地在以後的版面使用替代字體來代替不存在的字體。這個可以在編輯-偏好設定-字體中被改變或逆轉。 Font Substitution 字體替代 If you select OK, then save, these substitutions are made permanent in the document. 如果你選擇確認然後儲存, 這些替代將永久保留到檔案中。 Make these substitutions permanent 讓這些替代永久有效 Original Font 原始字體 Substitution Font 替代字體 This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. 這個檔案包括一些你的系統沒有安裝的字體,請爲它們選擇合適的替代字體。按取消將停止載入檔案。 FontSelect Select Alternate Font Font 字體 GradientEditor % % Add, change or remove color stops here 在這裡增加, 更改或者刪除顔色節點 Here you can add, change or remove Color-Stops. 這裡你可以增加, 更改或者刪除顔色節點。 Position: 位置: GradientEditorBase Frame Position: 位置: % Color: 顔色: Opacity: 透明度: Shade: 陰影: GradientPreview Add Stop Remove Stop GradientVectorBase Gradient Vector 梯度向量 Start: 開始: / End: 結束: Skew: Focal: Scale: 縮放: 1. Point: 2. Point: 3. Point: 4. Point: 5. Point: Edit Grid Points Edit Control Points Reset selected Control Point Reset all Control Points New Mesh... Reset Mesh Mesh -> Shape Snap to other Mesh Points Add Patch Remove Patch GradientVectorDialog Gradient Vector 梯度向量 GuideManager &Add 增加 (&A) A&dd 增加 (&D) Add a new horizontal guide 增加新的水平參考線 Add a new vertical guide 增加新的垂直參考線 Alt+A Alt+A Alt+D Alt+D Alt+E Alt+E Alt+G Alt+G Alt+L Alt+L Alt+P Alt+P Alt+S Alt+S Alt+Y Alt+Y Apply the shown guides to all pages in the document 套用在文件中的所有頁面顯示參考線 Apply to all pages 套用到所有頁面 &Apply to All Pages 套用到所有頁面 (&A) Appl&y to All Pages 套用到所有頁面 (&Y) &Close 關閉 (&C) Colum&n Gap 列距 (&N) &Column/Row C&olumns: 列 (&O): Create columns with guides, with an additional gap between the columns Create rows with guides, with an additional gap between the rows Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items D&elete 刪除 (&E) De&lete 刪除 (&L) Delete all guides from all pages 刪除所有頁面的所有參考線 Delete all guides from the current document 刪除目前文件的所有參考線 Delete all guides from the current page 刪除目前頁面的所有參考線 Delete all guides shown on the current page 刪除顯示在目前頁面的所有參考線 Delete Guides from &All Pages 刪除所有頁面的參考線 (&A) Delete Guides from Current &Page 刪除目前頁面的參考線 (&P) Delete the selected horizontal guide 刪除所選的水平參考線 Delete the selected vertical guide 刪除所選的垂直參考線 Guide 參考線 Guide Manager 參考線管理器 Horizontal Guides 水平參考線 Horizontals 水平 &Lock Guides 鎖定參考線 (&L) Lock the guides 鎖定參考線 Manage Guides 管理參考線 &Margins 頁面邊距 (&M) M&argins 邊距 (&A) &Misc Number of horizontal guides to create 產生的水平參考線數目 Number of vertical guides to create 產生的垂直參考線數目 Nu&mber: 數目 (&M): &Number: 數目 (&N): &Page 頁面 (&P) Preview 預覽 Refer to: 參考: Row &Gap 行距 (&G) Rows and Columns - Automatic Guides 行和列-自動參考線 &Rows: 行 (&R): S&election 選擇 (&S) &Selection 選擇 (&S) Set the guides in document. Guide manager is still opened but the changes are persistant guide manager 在檔案設定參考線。參考線管理器還是打開狀態,但是更改是延續的 &Single There is empty (0.0) guide already 已經有空白的(0.0)參考線 Unit 單位 &Update 更新 (&U) U&se Gap: 使用間距 (&S): Use &Gap: 使用間距 (&G): Vertical Guides 垂直參考線 Verticals 垂直 &X-Pos: X-座標 (&X): &Y-Pos: Y-座標 (&Y): Refer to 參考 HelpBrowser <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show <h2><p>對不起, 沒有安裝手冊!</p><p>請造訪:</p><ul><li>http://docs.scribus.net 來獲得更新的文件</li><li>http://www.scribus.net for downloads</li></ul></h2> 1 1 &Add 增加 (&A) &Add Bookmark 增加書籤 (&A) Book&marks 書籤 (&M) &Bookmarks 書籤 (&B) &Contents 內容 (&C) Contents 內容 &Delete 刪除 (&D) De&lete All 全部刪除 (&L) D&elete All 全部刪除 (&E) &Edit 編輯 (&E) &Exit 退出 (&E) E&xit 退出 (&X) Navigation Loading Failed &File 檔案 (&F) Find 尋找 Find &Next 尋找下一個 (&N) Find &Next... 尋找下一個 (&N)... Find &Previous 尋找上一個 (&P) Find &Previous... 尋找上一個 (&P)... &Find... 尋找 (&F)... Link 鏈結 &New 新建 (&N) New Bookmark 新書籤 New Bookmark's Title: 新書籤的標題: &Print... 列印 (&P)... &Quit 退出 (&Q) Relevance 相關 Scribus Help Scribus 幫助 Scribus Online Help Scribus 線上求助 &Search 尋找 (&S) Se&arch 尋找 (&A) Search Term: 尋找條件: Searching is case insensitive 尋找大小寫有別 Searching is case unsensitive 尋找大小寫有別 Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. 對不起, 沒有使用手冊可用! 請造訪: http://docs.scribus.net 來獲得最新檔案。 如果要下載, 請造訪: www.scribus.net 。 unknown 未知 HelpBrowserNavigation Form &Contents 內容 (&C) Se&arch 尋找 (&A) Searching is case insensitive 尋找大小寫有別 &Search 尋找 (&S) 1 1 Book&marks 書籤 (&M) &New 新建 (&N) &Delete 刪除 (&D) D&elete All 全部刪除 (&E) HunspellDialog Spelling check complete 拼字檢查已完成 HunspellDialogBase Check Spelling Text Language: Not in dictionary Ignore Once Ignore All Suggestions Change Change All HunspellPlugin Check Spelling... HyAsk Accept 接受 Add to the Exception List 增加到 例外清單 Add to the Ignore List 增加到 忽略清單 Cancel 取消 Possible Hyphenation 可能連字元 Skip 跳過 HySettings A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Add a new Entry 增加新條目 Consecutive Hyphenations &Allowed: 允許連續連字元 (&A): Edit Entry 編輯條目 Enables automatic hyphenation of your text while typing. 啓用在輸入時自動用連字元。 Exception List 例外清單 Hyphenate Text Automatically &During Typing 輸入時自動增加連字元到文字 (&D) &Hyphenation Suggestions 連字元提示 (&H) Ignore List 忽略清單 &Language: 語言 (&L): Length of the smallest word to be hyphenated. 需要用連字元的最小的詞的長度。 Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. 連續連字元的最大允許數目。 0 表示不限制。 &Smallest Word: 最小字 (&S): IdmlPlug Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Generating Items ImageInfoDialog Aperture: 光圈: Artist: 作者: Camera Manufacturer: 相機製造商: Camera Model: 相機型號: Comment: 評論: Copyright: 版權: Date / Time: 日期 / 時間: Description: 描述: EXIF Info EXIF 資訊 Exposure time 曝光時間 General Info 一般資訊 Has Embedded Paths: 已經嵌入路徑: Has Embedded Profile: 已經嵌入配置檔案: Has Layers: 有圖層: Image Info 圖片資訊 ISO equiv.: ISO 值: No Profile Name: 配置檔案名稱: Scanner Manufacturer: 掃描器製造商: Scanner Model: 掃描器型號: User Comment: 用戶評論: Yes ImportAIPlugin Import AI... 匯入 AI... Imports Illustrator Files 匯入 Illustrator 檔案 Imports most Illustrator files into the current document, converting their vector data into Scribus objects. 匯入大部分 Illustrator 檔案到目前文件, 把它們的向量資料轉換爲 Scribus 物件。 This file contains 2 versions of the data. Choose which one should be imported Use the pdf part Use the ai part The PDF Import plugin could not be found The file could not be imported 這個檔案無法被匯入 ImportCgmPlugin Import Cgm... CGM File CGM File (*.cgm *.CGM) Imports CGM Files Imports most binary CGM files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportCvgPlugin Import Cvg... Imports Cvg Files Imports most Cvg files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportDrwPlugin Import DRW... Micrografx DRW File Micrografx DRW File (*.drw *.DRW) Imports DRW Files Imports most DRW files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportIdml Imports Adobe Idml Packages Imports Adobe Indesign's idml packages into Scribus converting Indesign objects into scribus pageitems; not all are supported in Scribus, but all those supported are being imported here GPL Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) All Supported Formats ImportIdmlPlugin Import Idml... Adobe Indesign IDML Adobe Indesign IDML (*.idml *.IDML) Imports IDML Files Imports most IDML files into the current document, converting their vector data into Scribus objects. Adobe Indesign IDMS Adobe Indesign IDMS (*.idms *.IDMS) All Supported Formats ImportPSPlugin Import &EPS/PS... 匯入 EPS / PS (&E)... Import PostScript... 匯入 PostScript... Imports EPS Files 匯入 EPS 檔案 Imports most EPS files into the current document, converting their vector data into Scribus objects. 匯入大部分 EPS 檔案到目前文件, 把它們的向量資料轉換爲 Scribus 物件。 Imports most PostScript files into the current document, converting their vector data into Scribus objects. 匯入大部分 EPS 檔案到目前文件, 把它們的向量資料轉換爲 Scribus 物件。 Imports PostScript Files 匯入 PostScript 檔案 PDF PDF PostScript PostScript ImportPctPlugin Import Pict... Imports Pict Files Imports most Mac Pict files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportPdfPlugin Import PDF... Imports PDF Files Imports most PDF files into the current document, converting their vector data into Scribus objects. All Supported Formats The Import plugin cannot handle Postscript files ImportPubPlugin Import PUB... MS Publisher MS Publisher (*.pub *.PUB) Imports PUB Files Imports most MS Publisher files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportShapePlugin Import Dia Shapes... Dia Shapes "*.shape" File Dia Shapes "*.shape" File (*.shape *.SHAPE) Imports Dia shape Files Imports most Dia shapes into the current document, converting their vector data into Scribus objects. Dia shapes "*.shape" File (*.shape *.SHAPE) All Supported Formats ImportSmlPlugin Import Sml... Kivio Stencils "*.sml" File Kivio Stencils "*.sml" File (*.sml *.SML) Imports Sml Files Imports most Kivio stencils into the current document, converting their vector data into Scribus objects. All Supported Formats ImportWpgPlugin Import WPG... Imports WPG Files Imports most WPG files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXarPlugin Import Xara... XARA "*.xar" File XARA "*.xar" File (*.xar *.XAR) Imports Xara Files Imports most Xara files into the current document, converting their vector data into Scribus objects. All Supported Formats ImportXfigPlugin All Supported Formats 全部支援的格式 Import Xfig... 匯入 Xfig... Imports most Xfig files into the current document, converting their vector data into Scribus objects. 匯入大部分 Xfig 檔案到目前文件, 把它們的向量資料轉換爲 Scribus 物件。 Imports Xfig Files 匯入 Xfig 檔案 Imposition Landscape 橫式 Portrait 直式 ImpositionBase <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> 16 16 4 4 8 8 Alt+C Alt+C Alt+G Alt+G Alt+U Alt+U Back page from Back side &Booklet &Cancel 取消 (&C) Copies 複製份數 Destination page Double sided 雙面 Do&uble sided 雙面(&U) Fold 折頁 Front page from 首頁從 Front side Gri&d Height 高度 Imposition &OK 確定 (&O) Orientation 頁面方向 Pages 頁面 Pages per sheet 每張紙的頁面 Preview 預覽 Refresh preview 更新預覽畫面 Size 尺寸 Width 寬度 ImpositionPlugin Imposition dialog 拼版對話框 Imposition on grids, booklets and folds &Imposition... 拼版 (&I).. InlinePalette Paste to Item Edit Item Remove Item Inline Frames InsPage after Page 頁面之後 at End 最後 before Page 頁面之前 Custom 自定 &Height: 高度 (&H): &Insert 插入 (&I) Insert Page 插入頁面 Landscape 橫式 &Master Page: 主頁 (&M): Master Pages 主頁 Move Objects with their Page 物件和它們的頁面一起移動 Normal 普通 Orie&ntation: 頁面方向 (&N): Page Size 頁面尺寸 Page(s) 頁面 Portrait 直式 &Size: 尺寸 (&S): &Width: 寬度 (&W): InsertAFrame ... ... All Pages 全部頁面 Columns: Current Page 目前頁面 Insert Frames Custom Position 自定定位 Custom Size 自定尺寸 Gap: 間距: Height: 高度: &Image Frame 圖片框 (&I) Insert A Frame 插入一個框 &Location 位置 (&L) Open 打開 &Options 選項 (&O) Page Placement 頁面取代 Position of Frame Range of Pages 頁面的範圍 Same as the Bleed 和出血相同 Same as the Imported Image 和匯入的圖片相同 Same as the Page 和頁面相同 Same as the Page Margins 和頁面邊緣相同 &Size 尺寸 (&S) Source Document: 原始文件: Source Image: 原始圖片: &Text Frame 文字框 (&T) There are no options for this type of frame Top Left of Bleed 左上角的出血 Top Left of Margins Top Left of Page T&ype 類型 (&Y) Width: 寬度: X: X: Y: Y: <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames 插入一個或多個文字框 Insert one or more image frames 插入一個或多個圖片框 Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages 在一個頁面範圍內插入框 Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame 插入框的寬度 Height of the inserted frame 插入框的高度 Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames 連接插入的框 Link the first inserted frame to a preexisting text frame Link to Existing Frame 連接到現有框 Name of existing text frame to link to Source document to load into the text frame 要插入文字框中的原始文件 Source image to load into the inserted image frame 要插入圖片框中的原始圖片 InsertTable Insert Table 插入表格 Number of columns: 列數: Number of rows: 行數: InsertTableColumnsDialog Insert Column(s) Number of Columns: 列數: Position: 位置: Before positions After Beginning 開始 End 結束 InsertTableRowsDialog Insert Row(s) Number of Rows: 行數: Position: 位置: Before positions After Beginning 開始 End 結束 JavaDocs &Add... 增加 (&A)... Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. 增加一個新 Script, 預設了一個同名稱的函數。如果你想把這個 Script 作爲 "打開動作" Script 來用, 確保沒有更改函數的名稱。 &Close 關閉 (&C) &Delete 刪除 (&D) Do you really want to delete this script? 你真的要刪除這個 Script 嗎? Edit JavaScripts 編輯 JavaScripts &Edit... 編輯 (&E)... New Script 新 Script &New Script: 新 Script (&N): &No 否 (&N) &Yes 是 (&Y) KeyManager Action 動作 Alt Alt Alt+ Alt+ ALT+SHIFT+T ALT+SHIFT+T Ctrl Ctrl Ctrl+ Ctrl+ Current Key 目前鍵位 Export the current shortcuts into an importable file 匯出目前快捷鍵到一個可被匯入的檔案中 &Export... 匯出 (&E)... Import a shortcut set into the current configuration 匯入一個快捷鍵組合到目前設置中 &Import... 匯入 (&I)... Key Set XML Files (*.ksxml) 鍵位組合 XML 檔案 (*.ksxml) Keyboard shortcut sets available to load 可載入的快捷鍵組合 &Load 載入 (&L) Load the selected shortcut set 載入選擇的快捷鍵組合 Loadable Shortcut Sets 可載入快捷鍵組合 Meta Meta Meta+ Meta+ &No Key 沒有鍵 (&N) Reload the default Scribus shortcuts 重新載入 Scribus 預設的快捷鍵 &Reset 重置 (&R) Select a Key for this Action 爲這個動作選擇一個鍵位 Set &Key 設定鍵 (&K) Shift Shift Shift+ Shift+ This key sequence is already in use 這個鍵位組合已經被使用 &User Defined Key 使用者自定鍵 (&U) LatexEditor DPI DPI Automatic 自動 Editor 編輯器 Enter Code: Error 錯誤 Finished 已結束 Insert symbol 插入符號 Kill Program 殺掉程式 No item selected! 沒有物件被選擇! Options 選項 Program Messages: 程式訊息: Program: 程式: Resolution: 解析度: Revert 復原 Running 執行中 Status: 狀態: Status: Unknown 狀態: 未知 Update 更新 Use Preamble Information 資訊 An editor for this frame is already running! Editor running! 編輯器執行中! Please specify an editor in the preferences! 請在偏好設定中定義一個編輯器! Could not create a temporary file to run the external editor! Run External Editor... 執行外部編輯器... Running the editor failed with exitcode %d! Running the editor "%1" failed! 執行編輯器 "%1" 失敗! Insert Symbol 插入符號 LayerPalette % % Add a new layer 增加圖層 Blend Mode: 混合模式: Color 顔色 Color Burn 顔色焦灼 Color Dodge 顔色模糊 Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Darken 更暗 Delete layer 刪除圖層 Delete Layer 刪除圖層 Difference 差分 Do you want to delete all objects on this layer too? 你確定要一併刪除此圖層上的所有物件嗎? Duplicates the current layer 複製目前的圖層 Exclusion 排除 Hard Light 強光 Hue 色調 Layers 圖層 Lighten 更亮 Lock or Unlock Layer - Unchecked is unlocked Lower layer 降低圖層 Luminosity 亮度 Make Layer Visible - Uncheck to hide the layer from the display Multiply 倍增 Name 名稱 Normal 普通 Opacity: 透明度: Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Overlay 重疊 Print Layer - Uncheck to disable printing. 列印圖層 - 不核取來取消列印。 Raise layer 升高圖層 Saturation 飽和度 Screen 螢幕 Soft Light 柔光 Selects the Blendmode, works only in PDF 1.4 Layer Transparency, works only in PDF 1.4 and SVG Add a New Layer 增加圖層 Duplicate the Current Layer 複製目前的圖層 Raise Layer 升高圖層 Lower Layer 降低圖層 Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled Select Objects on Layer - Check to enable selecting. Name of the Layer - Double click on the name of a layer to edit the name LegacyMode All Supported Formats 全部支援的格式 Open 打開 LensDialogBase - - + + Add Lens 增加濾鏡 Fish Eye Lens 魚眼濾鏡 Lens Parameters 濾鏡參數 Magnification Lens 放大濾鏡 Optical Lens 光學濾鏡 Radius: 半徑: Remove Lens 移除濾鏡 Strength: 強度: X Pos: X-座標: Y Pos: Y-座標: Add a new lens 增加新線條 &Add Lens 增加濾鏡 (&A) Remove selected lens 移除所選的濾鏡 &Remove Lens 移除濾鏡 (&R) Zoom In 放大 Zoom Out 縮小 &X Pos: X-座標 (&X): Horizontal position of the lens &Y Pos: Y-座標 (&Y): Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens 魚眼濾鏡 (&F) Ra&dius: 半徑 (&D): Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Apply fancy lens effects 套用特別的濾鏡效果 Lens Effects 濾鏡效果 Lens Effects... 濾鏡效果... Path Tools 路徑工具 LineFormate Copy of %1 Copy of %1 &Delete 刪除 (&D) Do you really want to delete this style? 你真的要刪除此樣式嗎? Documents (*.sla *.scd);;All Files (*) 檔案 (*.sla *.scd);;所有檔案 (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 檔案 (*.sla *.sla.gz *.scd *.scd.gz);;所有檔案 (*) D&uplicate 複製 (&U) &Edit 編輯 (&E) Edit Line Styles 編輯線條樣式 &Import 匯入 (&I) &New 新建 (&N) New Style 新樣式 &No 否 (&N) Open 打開 &Save 儲存 (&S) &Yes 是 (&Y) LineStyleWBase % % Line Width: 線條寬度: LineStyleWidget Bevel Join 斜角連接 Flat Cap 平頭 Round Cap 圓頭 Round Join 圓角連接 Square Cap 方頭 LoadSavePlugin All Files (*) 所有檔案 (*) An error occured while opening file or file is damaged An error occured while parsing file at line %1, column %2 : %3 No File Loader Plugins Found 找不到檔案載入插件 LoremManager Alt+C Alt+C Alt+O Alt+O Author: 作者: Get More: 獲得更多: List of languages available to insert sample text in Lorem Ipsum 範例文字 Number of paragraphs of selected sample text to insert Paragraphs: 段落: Random Paragraphs 隨機段落 Select Lorem Ipsum 選擇範例文字 Standard Lorem Ipsum XML File: XML 檔案: MarginDialog Custom 自定 Height of the page(s) to be inserted &Height: 高度 (&H): Landscape 橫式 Manage Page Properties 管理頁面屬性 Margin Guides 頁面邊緣參考線 Master Page: 主頁: Move Objects with their Page 把物件和頁面一起移動 Orientation of the page(s) to be inserted Orie&ntation: 頁面方向 (&N): Other Settings 其他設定 Page Size 頁面尺寸 Portrait 直式 Size of the inserted pages, either a standard or custom size. 插入的頁面尺寸, 標準或是自定的尺寸。 &Size: 尺寸 (&S): Type: 類型: When inserting a new page between others, move objects with their current pages. This is the default action. Width of the page(s) to be inserted &Width: 寬度 (&W): MarginWidget All Document Pages 所有文件頁面 All Master Pages 所有主頁 Apply margin settings to all pages 應用頁邊距設定到所有頁面 Apply settings to: 套用設定到: Apply the margin changes to all existing master pages in the document 套用頁邊距設定到檔案中現存的所有主頁 Apply the margin changes to all existing pages in the document 套用頁邊距設定到檔案中現存的所有頁面 Bleeds 出血 &Bottom: 底部 (&B): Bottom: 底部: Distance between the bottom margin guide and the edge of the page 底部邊距線到頁邊的距離 Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 左邊頁邊邊距到頁邊的距離。如果對面頁被選擇, 這個距離可以用來獲得正確的裝訂邊距 Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding 右邊頁邊邊距到頁邊的距離。如果對面頁被選擇, 這個距離可以用來獲得正確的裝訂邊距 Distance between the top margin guide and the edge of the page 頂部邊距線到頁邊的距離 Distance for bleed from the bottom of the physical page 從出血到實際頁面底部的距離 Distance for bleed from the left of the physical page 從出血到實際頁面左邊的距離 Distance for bleed from the right of the physical page 從出血到實際頁面右邊的距離 Distance for bleed from the top of the physical page 從出血到實際頁面頂部的距離 Import the margins for the selected page size from the available printers. 從可用印表機匯入所選頁面的頁面邊距。 &Inside: 裡面 (&I): Inside: 裡面: Left: 左: &Left: 左 (&L): Margin Guides 頁面邊緣參考線 Outside: 外面: O&utside: 外面 (&U): Preset Layouts: 預設版面: Printer Margins... 印表機頁面邊距... &Right: 右 (&R): Right: 右: &Top: 頂部 (&T): Top: 頂部: Mark2Item Mark to Item Mark2ItemDlg Dialog 對話框 Label: Item: Mark2Mark Anchors Mark to Mark Mark to Item Note mark Mark2MarkDlg Dialog 對話框 Label: Select marker: MarkAnchor Anchor Mark MarkAnchorDlg Dialog 對話框 Label: MarkNote Insert Foot/Endnote MarkNoteDlg Dialog 對話框 Notes Style: MarkVariableText New Mark Edit selected Mark`s label. To create new Mark select "New Mark" in drop list and input new label Edit variable text Mark with Variable Text Edit selected Mark`s label. MarkVariableTextDlg Add new Mark for Variable Text Label: Text to insert: MarksManager Dialog 對話框 Update All Marks Edit 編輯 Delete 刪除 Anchors Variable Text Marks to Items Marks to Anchors Notes marks Marks Manager Double click to find mark in text Update all refeence texts for all marks Edit selected mark MasterPagesPalette Add a new master page 增加一個新的主頁 Copy #%1 of 複製 #%1 的 Copy #%1 of %2 複製 #%1 之 %2 Copy of %1 Copy of %1 Delete the selected master page 刪除目前選擇的主頁 Do you really want to delete this master page? 你確認要刪除這個主頁嗎? Duplicate the selected master page 複製目前選擇的主頁 Edit Master Pages 編輯主頁 Import master pages from another document 從另外一個檔案匯入主頁 Name: 名稱: &Name: 名稱 (&N): New Master Page 新建主頁 New Master Page %1 新建主頁 %1 New MasterPage 新建主頁 New Name: 新名稱: &No 否 (&N) Normal 普通 Rename Master Page 重新命名主頁 The Normal page is not allowed to be renamed. Unable to Rename Master Page 無法重新命名主頁 &Yes 是 (&Y) This master page is used at least once in the document. 這主頁在文件中至少使用了一次。 Do you really want to delete master page "%1"? Mdup &Horizontal Shift: 水平位移 (&H): Multiple Duplicate 多重複製 &Number of Copies: 複製數量 (&N): &Vertical Shift: 垂直位移 (&V): Measurements ° ° Angle: 角度: Distances 距離 DX: DX: DY: DY: Length: 長度: pt pt X1: X1: X2: X2: Y1: Y1: Y2: Y2: MeasurementsBase Distances 距離 X1: X1: 10000.0000 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: 長度: DX: DX: DY: DY: Angle: 角度: Unit: 單位: MergeDoc from %1 來自 %1 from 0 來自 0 After Page 頁面之後 At End 最後 Before Page 頁面之前 Chan&ge... 更改 (&C)... Create Page(s) 建立頁面 Documents (*.sla *.scd);;All Files (*) 檔案 (*.sla *.scd);;全部檔案 (*) Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) 檔案 (*.sla *.sla.gz *.scd *.scd.gz);;全部檔案 (*) &From Document: 來自檔案 (&F): &Import 匯入 (&I) Import Master Page 匯入主頁 &Import Master Page 匯入主頁 (&I) Import Page(s) 匯入頁面 &Import Page(s): 匯入頁面 (&I): Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. 插入一個以逗號隔開的標記, 這裏一個記號可以是* 來表示全部頁面, 1-5表示頁面範圍, 或者輸入單個頁碼。 Open 打開 &Select... 選擇 (&S)... MeshDistortionDialog - - + + Dialog 對話框 Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In 放大 Zoom Out 縮小 Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset 重置 (&R) MeshDistortionPlugin Mesh Distortion of Polygons Mesh Distortion... Path Tools 路徑工具 MissingFont instead 代以 Missing Font 丟失字體 The Font %1 is not installed. 字體 %1 沒有安裝。 Use 使用 ModeToolBar Angle: 角度: Width: 寬度: Properties... 屬性... Tools 工具 MovePages After Page 頁面之後 At End 最後 Before Page 頁面之前 Copy Page 複製頁面 Move Page(s) 移動頁面 Move Page(s): 移動頁面: Move Pages 移動頁面 Number of copies: 複製數量: To: 到: Number of Copies: 複製數量: Mpalette % % pt pt Absolute Colorimetric 絕對比色 Actual X-DPI: 實際 X-DPI: Actual Y-DPI: 實際 Y-DPI: Align to Baseline Grid 和基線網格對齊 Allow the image to be a different size to the frame Allow the image to be a different size to the frame Auto 自動 Automatic Linespacing 自動行距 Basepoint: 基點 &Basepoint: &B 基點: Bevel Join 斜角連接 &Bottom: 底部 (&B): Cell Lines Cell Lines Change settings for left or end points 更改左或尾點的設置 Choose the shape of frame... 選擇框體的形狀... Color of text fill. Only available with "outline" text decoration. Colour of text fill. Only available with "outline" text decoration. Color of text stroke. Only available with "outline" text decoration. Colour of text stroke. Only available with "outline" text decoration. &Colors 顔色 (&C) Column width 列寬 Colu&mns: &M 列: Distance between columns 列間距 Distance from Curve: 到曲線的距離: Distance of Text 文字距離 Distance of text from bottom of frame 文字和框體底部的距離 Distance of text from left of frame 文字和框體左邊的距離 Distance of text from right of frame 文字和框體右邊的距離 Distance of text from top of frame 文字和框體頂部的距離 Ed&ges: 邊緣 (&G): Edit shape of the frame... 編輯框體的形狀... &Edit Shape... 編輯形狀 (&E)... Edit tab settings of text frame... Edit tab settings of text frame... Enable or disable printing of the object 啓用或者禁用物件的列印 End Arrow: 箭尾: End Points 尾點 &Endings: &E 結尾: Fixed Linespacing 固定行距 Flat Cap 平頭 Flip Horizontal 水平翻轉 Flip Vertical 垂直翻轉 Font of selected text or object 選中的文字或者物件的字體 Font Size 字體大小 &Free Scaling 自由縮放 (&F) &Gap: 間距 (&G): Geometry 排列 Height 高度 &Height: 高度 (&H): Horizontal offset of image within frame Horizontal offset of image within frame Horizontal position of current basepoint 當前基點的水平位置 Hyphenation language of frame 框裏連字元語言 &Image 圖片 (&I) Indicates the level the object is on, 0 means the object is at the bottom Indicates the level the object is on, 0 means the object is at the bottom Input Profile: 輸入配置檔案: Keep the aspect ratio Keep the aspect ratio Keep the X and Y scaling the same Keep the X and Y scaling the same Lan&guage: 語言 (&G): Left Point 左點 &Left: 左 (&L): Level 圖層 &Line 線條 (&L) Line at Bottom Line at Bottom Line at the Left Line at the Left Line at the Right Line at the Right Line at Top Line at Top Line Spacing 行距 Line style of current object Line style of current object Line &Width: 線條寬度 (&W): Lock or unlock the object 鎖定或解鎖物件 Lock or unlock the size of the object 鎖定或者解鎖物件的尺寸 Make text in lower frames flow around the object shape Make text in lower frames flow around the object shape Make the image fit within the size of the frame Make the image fit within the size of the frame Manual Tracking 手工追蹤 Miter Join 尖角連接 Move one level down 下降一級 Move one level up 上升一級 Move to back 移到最下面 Move to front 移到最上面 Name 名稱 Name "%1" isn't unique.<br/>Please choose another. Name "%1" isn't unique.<br/>Please choose another. Name of selected object 所選物件名稱 No Style 沒有樣式 Non Zero 非零 None Number of columns in text frame 文字框中的列數 Offset to baseline of characters 字元底線位移 Path Text Properties Path Text Properties Pattern of line 線條樣式 Perceptual 知覺 Point from which measurements or rotation angles are referenced 表示尺寸和旋轉角度的點 Properties 屬性 P&roportional &R 按比例 Relative Colorimetric 相對比色 Rendering intent for the image Rendering intent for the image Rendering Intent: 渲染意圖: Resize the image horizontally Resize the image horizontally Resize the image vertically Resize the image vertically Right to Left Writing 右到左書寫 &Right: 右 (&R): Rotation of object at current basepoint 在目前基點旋轉物件 &Rotation: 旋轉 (&R): Round Cap 圓頭 Round Join 圓角連接 R&ound Corners: 圓角 (&O): Saturation 飽和度 Saturation of color of text fill 文字填充色的飽和度 Saturation of color of text stroke 文字輪廓顔色的飽和度 Scale &To Frame Size &T 縮放到框體大小 Scaling height of characters 字元高度縮放 Scaling width of characters 字元寬度縮放 Select bottom left for basepoint 選擇左下爲基點 Select bottom right for basepoint 選擇右下爲基點 Select center for basepoint 選擇中間爲基點 Select top left for basepoint 選擇左上爲基點 Select top right for basepoint 選擇右上爲基點 Set radius of corner rounding 設置圓角幅度 &Shape 形狀 (&S) Shape: 形狀: Show Curve 顯示曲線 Source profile of the image Source profile of the image Square Cap 方頭 Start Arrow: 箭頭: Start Offset: 開始位移: Style of current paragraph 當前段落的樣式 St&yle: 樣式 (&Y): Switches between Gap or Column width Switches between Gap or Column width T&abulators... &A 跳位字元... &Text 文字 (&T) Text &Flows Around Frame &F 字體環繞框 Thickness of line 線條粗細 To&p: 頂部 (&P): Type of line end 線條端類型 Type of line joins 線條類型 T&ype of Line: 線條類型 (&Y): Use a second line originally based on the frame's shape for text flow Use a second line originally based on the frame's shape for text flow Use a surrounding box instead of the frame's shape for text flow Use a surrounding box instead of the frame's shape for text flow Use &Bounding Box &B 使用限制方框 &Use Contour Line &U 使用輪廓線條 Use image proportions rather than those of the frame Use image proportions rather than those of the frame Vertical offset of image within frame Vertical offset of image within frame Vertical position of current basepoint 目前基點的垂直位置 Width 寬度 &Width: 寬度 (&W): X, Y, &Z X, Y, &Z &X1: &X1: X&2: X&2: &X-Pos: X-座標 (&X): X-Sc&ale: X-縮放 (&A): Y&1: Y&1: &Y2: &Y2: &Y-Pos: Y-座標 (&Y): Y-Scal&e: Y-縮放 (&E): MultiLine % % pt pt pt pt Bevel Join Bevel Join Dash Dot Dot Line 虛點點線 Dash Dot Line 虛點線 Dashed Line 虛線 Dotted Line 點線 Edit Style 編輯樣式 Flat Cap Flat Cap Line Width: Line Width: Miter Join Mitre Join Name "%1" isn't unique.<br/>Please choose another. 名稱 "%1" 不唯一。<br/>請選擇另外一個 OK OK Round Cap Round Cap Round Join Round Join Solid Line 實線 Square Cap Square Cap MultiProgressDialog %v of %m %v 之 %m &Cancel 取消 (&C) Overall Progress: 總進度: Progress 進度 MultiProgressDialogBase &Cancel 取消 (&C) Overall Progress: 總進度: Progress 進度 MultipleDuplicate Alt+G Alt+G Alt+S Alt+S &By Number of Copies By &Rows && Columns &Cancel 取消 (&C) Create &Gap Between Items Of &Horizontal Gap: 水平間距 (&H): Horizontal Gap: 水平間距: &Horizontal Shift: 水平位移 (&H): Multiple Duplicate 多重複製 Number of Columns: 列數: &Number of Copies: 複製數量 (&N): Number of Rows: 行數: &OK 確定 (&O) Rotation: 旋轉: &Shift Created Items By &Vertical Gap: 垂直間距 (&V): Vertical Gap: 垂直間距: &Vertical Shift: 垂直位移 (&V): MyPlugin My &Plugin 我的插件 (&P) MyPluginImpl Scribus - My Plugin Scribus - 我的插件 The plugin worked! 插件可作用! NewDoc &Automatic Text Frames 自動文字框 (&A) Colu&mns: 列 (&M): Create text frames automatically when new pages are added 當新頁面增加時自動建立文字框 Custom 自定 Default unit of measurement for document editing 編輯檔案時預設使用的尺寸單位 &Default Unit: 預設單位 (&D): Distance between automatically created columns 自動建立的列的列距 Do not show this dialog again 不再顯示此對話框 Document Layout 文件樣式 Document page size, either a standard size or a custom size 檔案的頁面大小, 標準尺寸或者是自定尺寸 First Page is: 第一頁是: First page number of the document 檔案的起始頁碼 F&irst Page Number: 起始頁碼 (&I): &Gap: 間距 (&G): Height of the document's pages, editable if you have chosen a custom page size 檔案的頁面高度, 當你選擇自定頁面尺寸時, 可以修改它 &Height: 高度 (&H): Initial number of pages of the document 檔案起始頁數 Landscape 橫式 Margin Guides 頁面邊緣參考線 New Document 新建檔案 &New Document 新建檔案 (&N) Number of columns to create in automatically created text frames 自動建立的文字框裡的列數 N&umber of Pages: 頁面數 (&U): Open 打開 New from Template Open Existing Document Open Recent Document Open &Existing Document 打開現有檔案 (&E) Open Recent &Document 打開最近的檔案 (&D) Options 選項 Orientation of the document's pages 檔案頁面的方向 Orie&ntation: 頁面方向 (&N): Page Size 頁面大小 Portrait 直式 Show Document Settings After Creation 當產生之後顯示文件的設定 &Size: 尺寸 (&S): Width of the document's pages, editable if you have chosen a custom page size 檔案的頁面寬度, 當你選擇自定頁面尺寸時, 可以修改它 &Width: 寬度 (&W): New &from Template 從範本新建 (&F) NewFromTemplatePlugin Load documents with predefined layout 以預設的版面載入檔案 New &from Template... 從範本新建 (&F)... Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). 從別人或自己建立的範本中新建文件 (例如, 如果你的文件有固定的樣式)。 NewMarginWidget Form Preset Layouts: 預設版面: Left: 左: Right: 右: Top: 頂部: Bottom: 底部: Link 鏈結 Printer Margins... 印表機頁面邊距... Distance between the top margin guide and the edge of the page 頂部邊距線到頁邊的距離 Distance between the bottom margin guide and the edge of the page 底部邊距線到頁邊的距離 Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding &Inside: 裡面 (&I): &Left: 左 (&L): O&utside: 外面 (&U): &Right: 右 (&R): NodePalette % % % to Enlarge or Reduce By % 來增加或減少 % to Enlarge or Shrink By % 來增加或減少 &Absolute Coordinates 絕對座標 (&A) Activate Contour Line Editing Mode 啟動輪廓線條編輯模式 Add Nodes 增加節點 Angle of Rotation 旋轉角度 Close this Bezier Curve 關閉這個貝茲 (Bezier) 曲線 Delete Nodes 刪除節點 Edit &Contour Line 編輯輪廓線 (&C) &End Editing 結束編輯 (&E) Enlarge the Size of the Path by shown % 按所示增加路徑尺寸 % Enlarge the Size of the Path by the shown value Mirror the Path Horizontally 水平鏡像路徑 Mirror the Path Vertically 垂直鏡像路徑 Move Control Points 移動控制點 Move Control Points Independently 獨立移動控制點 Move Control Points Symmetrical 對稱移動控制點 Move Nodes 移動節點 Nodes 節點 Open a Polygon or Cuts a Bezier Curve 打開一個多邊形或剪下貝茲 (Bezier) 曲線 Reduce the Size of the Path by shown % 按所示減少路徑尺寸 % Reduce the Size of the Path by the shown value &Reset Contour Line 重置輪廓線 (&R) Reset Control Points 重置控制點 Reset the Contour Line to the Clipping Path of the Image Reset the Contour Line to the Original Shape of the Frame Reset the Contour Line to the Original Shape of the Frame Reset this Control Point 重置這個節點 Rotate the Path Clockwise 順時針旋轉路徑 Rotate the Path Counter-Clockwise 逆時針旋轉路徑 Set Contour to Image Clip Shear the Path Horizontally to the Left 向左水平切變路徑 Shear the Path Horizontally to the Right Shear the Path Horizontally to the Right Shear the Path Vertically Down 向下垂直切變路徑 Shear the Path Vertically Up 向上垂直切變路徑 Shrink the Size of the Path by shown % to Canvas to Page 到頁面 OK Cancel 取消 Reset all edits Value to Enlarge or Shrink By When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. &X-Pos: X-座標 (&X): &Y-Pos: Y-座標 (&Y): Set Shape to Image Clip Set the Shape to the Clipping Path of the Image NotesStylesEditor Notes Styles Editor Add New Style New Style Name Footnotes Endnotes Numbering Range 範圍 Start Number Prefix Suffix Superscript in text Superscript in notes Mark Character Style Note Paragraph Style Auto Height Auto Width Auto Welding Remove if empty Apply Delete 刪除 OK Document 檔案 Section Story Page Frame Cancel 取消 Dialog is in adding new notes style mode. After pressing Cancel button dialog will be switched into normal notes styles edit mode. Add Style New notes style will be add to document only after pressing Apply butoton. You cannot switch to different notes style before you apply that new one or press Cancel button and exit from adding mode. Mark`s Character Style Note`s Paragraph Style default No Style 沒有樣式 Warning! Deleting Notes Style You are going to delete notes style %1. All notes and marks using that style are also going to be deleted. Cancel Adding Notes Styles Editor is in adding new notes style mode. After pressing Cancel button Notes Styles Editor switch into normal notes styles edit mode. OODPlug Group%1 群組%1 This document does not seem to be an OpenOffice Draw file. 這個檔案似乎不是 OpenOffice Draw 檔案。 OODrawImportPlugin Import &OpenOffice.org Draw... 匯入OpenOffice.org Draw (&O)... Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. 匯入大部分 OpenOffice.org Draw 檔案到目前文件, 把它們的向量資料轉換爲 Scribus 物件。 Imports OpenOffice.org Draw Files 匯入 OpenOffice.org Draw 檔案 OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenDocument 1.0 Draw (*.odg *.ODG) OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw OpenOffice.org 1.x Draw (*.sxd *.SXD) The file could not be imported 這個檔案無法被匯入 This file contains some unsupported features 這個檔案包含了一些不被支援的功能 OSGEditor 3D Properties Load Model ... Clear Model Views Name: 名稱: Options 選項 Solid Solid Wireframe Transparent Transparent Wireframe Wireframe Shaded Wireframe Hidden Wireframe Vertices Shaded Vertices Illustration Solid Outline Shaded Illustration Line Color: Face Color: Opacity: 透明度: % Render Style: Bounding Box Transparent Bounding Box Transparent Bounding Box Outline Lighting: None Headlamp White Day Night Hard Primary Blue Red Cube CAD Artwork Field of Vision Angle: 角度: Add View... Remove View OSGEditorDialog Default Add a new View Name: 名稱: New View Import 3-D Model OdtDialog Cancel 取消 Do not ask again 下次不要再詢問 Enabling this will overwrite existing styles in the current Scribus document 啓用這個將覆蓋目前 Scribus 中的現存樣式 Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Merge Paragraph Styles 合併段落樣式 Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. 按特性合併段落樣式。這將減少類似段落樣式的數量,將保持段落樣式的特性,即使原始檔案的樣式的命名不同。 OK 確定 OpenDocument Importer Options OpenDocument 匯入器選項 Overwrite Paragraph Styles 覆蓋段落樣式 Prepend the document name to the paragraph style name in Scribus. 把檔案名稱追加到 Scribus 裡的段落樣式的名稱。 Use document name as a prefix for paragraph styles 用檔案名稱作爲段落樣式的字首 OldScribusFormat Scribus 1.2.x Document Scribus 1.2.x 檔案 Scribus Document Scribus 檔案 OneClick Angle: 角度: Height: 高度: Basepoint Length: 長度: Remember Values 記住數值 Size 尺寸 Width: 寬度: OpenPalette empty palette OpenPaletteModel Elements Visible 可見 OutlinePalette Element 元素 Active Visible 可見 Printing 列印 Locked 已鎖定 Inline Frame Layer: " Free Objects 自由物件 Group 群組 Name "%1" isn't unique.<br/>Please choose another. 名稱 "%1" 不是唯一的。<br/>請選擇另一個名稱。 Outline 輪廓 Page 頁面 Enter a keyword or regular expression to filter the outline. Filter: Ctrl+F Filter the Outline using a keyword Ctrl+F OutlineValues % % Linewidth 線條寬度 OutlineWidget Layer is: active visible invisible printing non printing locked X-Pos: X-座標: Y-Pos: Y-座標: PDFExportDialog %1 does not exists and will be created, continue? %1 不存在且將會被建立, 繼續嗎? Cannot create directory: %1 無法建立目錄: %1 Cha&nge... 更改 (&N)... Output one file for eac&h page 逐頁輸出單個檔案 (&H) O&utput to File: 輸出到檔案 (&U): Open PDF after Export Open the exported PDF with the PDF viewer as set in External Tools preferences, when not exporting to a multi-file export destination. The save button will be disabled if you are trying to export PDF/X and the info string is missing from the PDF/X tab. PDF Files (*.pdf);;All Files (*) PDF 檔案 (*.pdf);;全部檔案 (*) &Save 儲存 (&S) Save as 另存新檔 Save as PDF 儲存爲 PDF This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. Save As 另存新檔 PDFLibCore Date: 日期: Exporting Items on Current Page: 匯出目前頁面的物件: Exporting Master Page: 匯出主頁: Exporting Page: 匯出頁面: Qt build miss both "UTF-16" and "ISO-10646-UCS-2" text codecs, pdf export is not possible Failed to load an image : %1 載入圖片: %1 失敗 Failed to load an image mask : %1 載入圖片遮罩: %1 失敗 Failed to write an image : %1 寫入圖片: %1 失敗 Insufficient memory for processing an image 處理圖片所需要的記憶體不足 Page: 頁: Saving PDF 儲存 PDF A write error occurred, please check available disk space 寫入錯誤, 請檢查可用的磁碟空間 PDFToolBar PDF Tools PDF 工具 PDFlib Exporting Items on Current Page: 輸出目前頁面的物件: Exporting Master Pages: 輸出主頁: Exporting Pages: 輸出頁面: Saving PDF 儲存 PDF PPreview A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. All 全部 Allows you to embed color profiles in the print stream when color management is enabled Anti-alias &Graphics &T 反鋸齒圖像 Anti-alias &Text 反鋸齒文字 (&T) Apply Color Profiles 套用顏色配置檔案 Black &C &C Clip to Page Margins 裁切到頁邊 Close 關閉 Convert Spot Colors Cyan &Display CMYK 顯示 CMYK (&D) Display Settings 顯示設定 Display Trans&parency 顯示透明度 (&P) Enable &Antialiasing 啟用反鋸齒 (&A) Enable/disable the C (Cyan) ink plate 啓用 / 停用 C (青) 墨水板 Enable/disable the K (Black) ink plate 啓用 / 停用 K (黑) 墨水板 Enable/disable the M (Magenta) ink plate 啓用 / 停用 M (洋紅) 墨水板 Enable/disable the Y (Yellow) ink plate 啓用 / 停用 Y (黃) 墨水板 Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled. File 檔案 Fit to Height 符合高度 Fit to Page 符合頁面 Fit to Width 符合寬度 Gives a print preview using simulations of generic CMYK inks, instead of RGB colors 不用RGB顔色而以CMYK墨水來類比列印預覽 &K &K &M &M Magenta 洋紅 Preview Settings 預覽設定 Mirror Page(s) Horizontal 水平鏡像頁面 Mirror Page(s) Vertical 垂直鏡像頁面 Print in Grayscale 灰階列印 Print Preview 列印預覽 Print Settings 列印設定 Print... 列印... Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts 在閱讀器中提供更加悅目的文字顯示, 代價是預覽稍微緩慢。這只影響 Type 1 字體 Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing 在預覽中提供了對 TrueType 字體, OpenType 字體, EPS, PDF 和向量圖更加悅目的顯示, 代價是預覽速度輕微的緩慢。 Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Resize the scale of the page. 調整頁面的縮放比例。 Scaling: 縮放: Separation Name 分離名稱 Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later 顯示檔案中的透明度和透明物件。需要 Ghostscript 7.07 或更高版本 &Under Color Removal 清除底色 (&U) &Y &Y Yellow Clip to Printer Margins 裁切到印表機邊距 Display Ink Coverage Threshold: % % None PSLib Exporting Page: 匯出頁面: Exporting Pages: 匯出頁面: Failed to load an image : %1 載入圖片: %1 失敗 Failed to load an image mask : %1 載入圖片遮罩: %1 失敗 Failed to write data for an image Insufficient memory for processing an image 處理圖片所需要的記憶體不足 Processing Master Page: 處理主頁: Processing Master Pages: 處理主頁: PageItem Copy of Copy of Image 圖片 Line 線條 PathText 路徑文字 Symbol Group 群組 RegularPolygon Arc Spiral Table Polygon 多邊形 Polyline 線套 Text 文字 PageItemAttributes &Add 增加 (&A) Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+L Alt+L Attributes 特性 &Cancel 取消 (&C) C&lear 清除 (&L) &Copy 複製 (&C) &Delete 刪除 (&D) Is Child Of 是...的子級 Is Parent Of 是...的父級 Name 名稱 None relationship None &OK 確定 (&O) Parameter 參數 Relates To 相對於 Relationship 關係 Relationship To 關係於 Type 類型 Value 數值 PageItemAttributesBase &Add 增加 (&A) Alt+A Alt+A Alt+C Alt+C Alt+D Alt+D Alt+L Alt+L &Cancel 取消 (&C) C&lear 清除 (&L) &Copy 複製 (&C) &Delete 刪除 (&D) Name 名稱 &OK 確定 (&O) Page Item Attributes 頁面物件特性 Parameter 參數 Relationship 關係 Relationship To 關係於 Type 類型 Value 數值 PageItem_ImageFrame Image 圖片 Preview Settings 預覽設定 Embedded Image File: 檔案: Original PPI: 原始 PPI: Actual PPI: 實際 PPI: Size: 尺寸: Colorspace: 顔色模式: Unknown 未知 Page: 頁: Pages: 頁: Embedded Image missing missing or corrupt missing 遺失 No Image Loaded 沒有圖片被載入 PageItem_LatexFrame Application 程式 Could not create a temporary file to run the application! 無法產生一個暫時檔案來執行程式! DPI DPI Error 錯誤 Finished 已完成 Information 資訊 Please specify an editor in the preferences! 請在偏好設定中定義一個編輯器! Render This is usually a problem with your input. Please check the program's output. Do you want to open the editor to fix the problem? The application "%1" failed to start! Please check the path: Render Frame Running 執行中 Running the application "%1" failed! 執行程式 "%1" 失敗! Running the editor "%1" failed! 執行編輯器 "%1" 失敗! Running the external application failed! 執行外部程式失敗! State 狀態 The application "%1" crashed! 程式 "%1" 崩潰! The application "%1" failed to start! 程式 "%1" 啟動失敗! The config file didn't specify a executable path! No configuration defined to run the application! No application defined Rendering... Render Error PageItem_NoteFrame Endnote frame Footnote frame No Style 沒有樣式 PageItem_OSGFrame OSG Default 3D Model File: 檔案: PageItem_PathText Chars: 字元: Lines: 線條: Paragraphs: 段落: Words: 字: PageItem_TextFrame Chars: 字元: Lines: 線條: No Style 沒有樣式 Linked Text 串聯的文字 Paragraphs: 段落: Text Frame 文字框 Words: 字: PageLayouts Document Layout 文件樣式 First Page is: 第一頁是: Page Layout 頁面排版 Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Arrange Pages 管理頁面 Available Master Pages: 可用主頁: Document Pages: 檔案頁: Double sided 雙面 Drag pages or master pages onto the trash to delete them 把頁面或者主頁拖拉到垃圾筒裡來刪除它們 Drag pages or master pages onto the trashbin to delete them 把頁面或者主頁拖拉到垃圾箱裏來刪除它們 Here are all your master pages. To create a new page, drag a master page to the page view below 這是你所有的主頁。要建立新頁, 請把主頁拖拉到下面的頁面視圖 Middle Right 中右 Normal 普通 This master page is used at least once in the document. 這主頁在文件中至少使用了一次。 Do you really want to delete this master page? 你真的要刪除這個主頁嗎? PagePalette_MasterPages Edit Master Pages 編輯主頁 Duplicate the selected master page 複製目前選擇的主頁 Delete the selected master page 刪除目前選擇的主頁 Add a new master page 增加一個新的主頁 Import master pages from another document 從另外一個檔案匯入主頁 This master page is used at least once in the document. 這主頁在文件中至少使用了一次。 Do you really want to delete master page "%1"? Copy #%1 of %2 複製 #%1 之 %2 &Name: 名稱 (&N): New Master Page 新建主頁 Name: 名稱: New MasterPage 新建主頁 New Master Page %1 Copy #%1 of Unable to Rename Master Page 無法重新命名主頁 The Normal page is not allowed to be renamed. Rename Master Page 重新命名主頁 New Name: 新名稱: PagePalette_MasterPagesBase Form <<< Return to pages edition PagePalette_Pages This master page is used at least once in the document. 這主頁在文件中至少使用了一次。 Do you really want to delete this master page? Arrange Pages 管理頁面 Available Master Pages: 可用主頁: Document Pages: 檔案頁: List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them 把頁面或者主頁拖拉到垃圾筒裡來刪除它們 PagePalette_PagesBase Form Available Master Pages: 可用主頁: Document Pages: 檔案頁: Document Layout 文件樣式 PageSelector %1 of %1 %1 的 %1 %1 of %2 %1 的 %2 Go to the first page 到第一頁 Go to the previous page 到上一頁 Go to the next page 到下一頁 Go to the last page 到最後一頁 Select the current page 選擇目前頁面 of %1 number of pages in document 之 %1 PageSize A A B B C C Crown Crown D D Demy Demy Double Demy Double Demy E E Elephant Elephant Executive Executive Foolscap Foolscap Government Letter Government Letter Large Post Large Post Ledger Ledger Legal Legal Letter Letter Medium 中等 Post Post Quad Demy Quad Demy Quarto Quarto Royal Royal STMT STMT PaintManagerBase Manage Colors and Fills <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:10pt; font-weight:400; font-style:normal;"> <table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> <tr> <td style="border: none;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</p></td></tr></table></body></html> 1 1 Import colors to the current set from an existing document 從現有的檔案中匯入顔色組合到目前的組合 &Import 匯入 (&I) Create a new color within the current set 在目前的顏色組合中建立一個新的顏色 Add 增加 Edit the currently selected color 編輯目前選取的顏色 &Edit 編輯 (&E) Make a copy of the currently selected color 複製目前選取的顏色 D&uplicate Delete the currently selected color 刪除目前選取的顏色 &Delete 刪除 (&D) Remove unused colors from current document's color set 從目前檔案顔色組合清除未用顔色 &Remove Unused 清除未用的 (&R) Color Sets 顔色組合 Current Color Set: 目前顔色組合: ... ... Save the current color set 儲存目前的顔色組合 &Save Color Set 儲存顔色組合 (&S) Make the current colorset the default color set 將目前的顏色組合設定為預設的顏色組合 OK Cancel 取消 PaintManagerDialog Solid Colors Gradients Patterns Scribus Swatches User Swatches Merge Color Set Sort by Name 按名稱排序 Sort by Color Sort by Type &Import 匯入 (&I) Add 增加 &Edit 編輯 (&E) Load File Load Set Rename New Gradient New Color 新顔色 Rename Entry Copy of %1 Selected Colors Do you really want to clear all your gradients? Do you really want to clear all your colors and gradients? Do you really want to clear all your patterns? All Supported Formats Scribus Gradient Files "*.sgr" (*.sgr *.SGR);; Gimp Gradient Files "*.ggr" (*.ggr *.GGR);; All Files (*) Open 打開 All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) 所有支援的格式 (%1);;檔案 (%2);;其他檔案 (%3);;全部檔案 (*) Import Colors 匯入顏色 Information 資訊 The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. &Name: 名稱 (&N): Choose a Directory 選擇一個目錄 Loading Patterns Choose a Name 選擇一個名稱 ParaStyleComboBox No Style 沒有樣式 PathAlongPathPlugin Bends a Polygon along a Polyline Path Along Path... Bends a Polygon along a Path. Path Tools 路徑工具 This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths 連接路徑 Starting Point 開始端點 End Point 結束端點 with: 用: a straight Line 一條直線 Points moving Preview on Canvas Connect First Line 連接第一條線 with Second Line 和第二條線 by using: 使用: PathConnectPlugin Connect Paths 連接路徑 Connects two Paths. Path Tools 路徑工具 Connect 2 Polylines. 連接兩線段。 PathCutPlugin Cut Polygon 剪下多邊形 Cuts a Polygon with a Path. Cuts a Polygon by a Polyline Error 錯誤 Path Tools 路徑工具 Qt Version too old Qt 的版本太舊了 The cutting line must cross the polygon and both end points must lie outside of the polygon This plugin requires at least version 4.3.3 of the Qt library 這個插件需要版本至少為 4.3.3 的 Qt 函式庫 PathDialogBase Effect Type 特效類型 Gap between Objects 物件間的間距 Horizontal Offset 水平位移 Path along Path 路徑上的路徑 Preview on Canvas Repeated 重複 Repeated, stretched Rotate Object by 90° 將物件旋轉 90° Single Single, stretched Vertical Offset 垂直位移 Rotate Objects by: 90° 90° 180° 180° 270° 270° PathFinderBase ... ... + + = = Boolean Path Operations 布林路徑操作 keep 保持 Operation 運算 Options 選項 Swap Shapes First source shape. 第一來源形狀。 Second source shape. 第二來源形狀。 The resulting shape. Unites the shapes Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Custom Colors 自定顏色 Stroke: Fill: 填充: Keep a copy of the original item after applying the operation 在套用操作之後保留原物件的拷貝 Keep 保持 Subtracts the second shape from the first shape Exchange the Source Shapes 交換來源形狀 The resulting shape uses the color of the first source shape First Shape 第一形狀 The resulting shape uses the color of the second source shape Second Shape 第二形狀 The resulting shape uses the colors listed below Stroke Color 邊顔色 Fill Color 填充顔色 Result Takes Color from: PathFinderDialog Intersection gets Color of: Result gets Color of: PathFinderPlugin Apply fancy boolean operations to paths. Path Operations 路徑運算 Path Operations... 路徑運算... Path Tools 路徑工具 Qt Version too old Qt 的版本太舊了 This plugin requires at least version 4.3.3 of the Qt library 這個外掛需要版本至少為 4.3.3 的 Qt 函式庫 PathStrokerPlugin Converts the stroke of a Path to a filled Path. Create Path from Stroke Path Tools 路徑工具 PatternDialog All Files (*) 所有檔案 (*) All Supported Formats 全部支援的格式 Cancel 取消 Choose a Directory 選擇一個目錄 Load 載入 &Name: 名稱 (&N): OK 確定 Open 打開 Remove 移除 Remove All 全部移除 Rename 重新命名 PatternPropsDialog Pattern Properties pt pt % Offsets 位移 X: X: Y: Y: Scaling 縮放 X-Scale: X-縮放: Y-Scale: Y-縮放: Rotation 旋轉 Skewing Spacing Value: 數值: X-Skew: Y-Skew: Angle: 角度: Flip: Close 關閉 PctPlug Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Group%1 群組%1 Generating Items PdfImportOptions PDF-Import Importing File: TextLabel Page Range All Pages 全部頁面 Single Page 單頁 Choose Pages Crop to: Media Box Bleed Box Trim Box 裁剪方框 Crop Box Art Box PdfPlug Importing: %1 正在匯入: %1 Analyzing File: 分析檔案: Generating Items Open PDF-File Password 密碼 PermitDialog Confirm to run unsafe script scriptname.py <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:8pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Attention:</span> This script file contains code which <span style=" font-style:italic;">might harm </span>your system.</p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">You should only permit execution of this script if you are sure that it comes from a trustworthy source. </p></body></html> De&tails >> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'DejaVu Sans'; font-size:8pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif';"></p></body></html> &Remember preference for this file &Allow &Deny PicSearch Alt+P Alt+P Alt+S Alt+S Cancel 取消 Colorspace: 顔色模式: DPI DPI &Preview 預覽 (&P) Preview 預覽 Resolution: 解析度: Result 結果 Search Results for: 搜尋結果: Select 選擇 &Select 選擇 (&S) Size: 尺寸: Unknown 未知 PicSearchOptions Base directory for search does not exist. Please choose another one. 尋找的基礎目錄不存在。 請重新選擇一個。 Cancel Search 取消尋找 Case insensitive search 尋找大小寫沒有別 Change... 更改... Scribus - Image Search Scribus - 圖片尋找 Search for: 尋找: Search Images 尋找圖片 Search recursively 遞迴尋找 Searching 尋找中 Select a base directory for search 選擇一個尋找的基礎目錄 Start at: 開始從: Start Search 開始尋找 The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows 當你核取這個選項後檔案系統會不分大小寫搜尋檔案名。記住除了 MS Windows 之外, 大部分的作業系統都不是預設開啟 The search failed: %1 尋找失敗: %1 PicStatus Cancel Search 取消尋找 Close 關閉 Colorspace: 顔色模式: DPI: DPI: Set format specific properties of certain image types, like clipping paths Edit Image... 編輯圖片... Eff. DPI: 有效的 DPI: emb. PSD emb. PSD EPS/PS EPS/PS Extended Image Properties... 圖片延伸屬性... Format: 格式: Go to 跳到 Goto 跳到 Image 圖片 Image Effects... 圖片效果... Image Tools 圖片工具 Image Visible 顯示圖片 Information 資訊 JPG JPG JPG2000 JPG2000 Layout 版面 Manage Images 管理圖片 Manage Pictures 管理圖片 Missing 遺失 n/a n/a Name 名稱 Name: 名稱: No images named "%1" were found. 找不到叫做 "%1" 的圖片。 Not on a Page 不是一個頁面 Object: 物件: OK 確定 On Page: 在頁面上: Page 頁面 Path 路徑 Path: 路徑: PDF PDF Pixels: 像素: Print 列印 Print Image 列印圖片 Printed: 已列印: PSD PSD Scale: 縮放: Scribus - Image Search Scribus - 圖像尋找 Search 尋找 Search... 尋找... Select 選擇 Select a base directory for search 選擇一個尋找的基礎目錄 Size Sort by Name 按名稱排序 Sort by Page 按頁面排序 Status 狀態 The search failed: %1 尋找失敗: %1 TIFF TIFF Unknown 未知 Yes Name of the image file 圖片檔案的名稱 Location where the image file is stored 圖片檔案儲存的位置 Search for a missing image 搜尋遺失的圖片 Type of the image 圖片的類型 The colorspace of the image 圖片的顏色空間 Colorspace used within the image, eg RGB or CMYK 圖片使用的顏色空間, 例如 RGB 或 CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed 列印時的圖片大小 Page that the image is displayed on Page Item: 頁面物件: Name of the page item that contains the image Effective DPI: 有效的 DPI: Effective resolution of the image after scaling 圖片縮放後的有效解析度 Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item 啟用或停用匯出物件 Export/Print Image 匯出/列印圖片 Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PictureBrowser Scribus Picture Browser Folder Browser Collection Browser Document Browser Include Subdirectories Create new category New collection Delete selected collection Edit selected collection Add selected images to collection(s) Remove selected images from current collection Tag selected images Import collection/collectionset Export collection/collectionset add selected images to collections More Always on Top Sort by Name 按名稱排序 Sort by Date Sort by Size Sort by Type Change sortorder Zoom in 放大 Zoom out 縮小 Go to Page Preview Images Only Preview with Information Quick Insert Custom Insert Add to Collection Go 0 Image(s) Displayed, 0 Image(s) Filtered Autosave Settings Reset Settings Close 關閉 Information 資訊 File 檔案 Name: 名稱: Path: 路徑: Size: 尺寸: Date: 日期: Image 圖片 Format: 格式: Width: 寬度: Colorspace: 顔色模式: Height: 高度: DPI: DPI: Layers: Embedded Profile: Profile Name: 配置檔案名稱: Filter / Search Filters: Filter Displayed Images Search Images 尋找圖片 Filter Collections ... ... Criteria << Add Name (Wildcards Allowed) Date 日期 Size Type 類型 Tag Contains Doesn't Contain Newer than Older than Smaller than Bigger than KB add Apply Filters Clear Filters Insert Image Image Placement Page(s): Image Frame(s): Page(s) 頁面 Position of New Frame(s) Top Left of Margins Top Left of Page Top Left of Bleed 左上角的出血 Custom Position 自定定位 X: X: Y: Y: Same as Page Margins Same as Page Same as Bleed Custom Size 自定尺寸 Insert Image into 0 Page(s) 0 Frame(s) Insert 插入 Tag Image(s) Selected Images: Tag Selected Image(s) Add New Tag Set Tags Picture Browser Error No Image(s) Selected You have to create a category first No image(s) selected No page/image frame selected Directory does not exist Select Directory Import Image Collection Scribus ImageCollection (*.sic) Export Image Collection You have to select something you want to export No tag entered Image still loading JPG JPG TIFF TIFF PSD PSD EPS/PS EPS/PS PDF PDF JPG2000 JPG2000 emb. PSD emb. PSD not available No image selected PictureBrowserPlugin &Picture Browser... PixmapExportPlugin Export As Image 匯出成圖片 Export successful 輸出成功 Exports selected pages as bitmap images. 把選中的頁面匯出爲點陣圖。 Save as &Image... 另存為圖片 (&I)... Save as Image 另存爲圖片 The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager 找不到插件 Cannot find symbol (%1) plugin manager 不能找到標記 (%1) init failed plugin load error 初始化失敗 Plugin: %1 failed post initialization plugin manager 插件: %1 初始化失敗 Plugin: %1 failed to load: %2 plugin manager 插件: %1 不能載入: %2 Plugin: %1 initialized ok plugin manager 插件: %1 初始化完成 Plugin: %1 loaded plugin manager 插件 %1 已經載入 Plugin: loading %1 plugin manager 插件: 正在載入 %1 There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. 載入 %1 之 %2 插件時發生錯誤 %3。可能是因為 unknown error plugin manager 未知的錯誤 unknown plugin type plugin load error 未知的插件類型 PluginManagerPrefsGui File 檔案 Form How to run 如何運行 Load it? 載入嗎? No Plugin 插件 Plugin ID 插件ID Plugin Manager 插件管理器 Type 類型 Yes You need to restart the application to apply the changes. 你必須重新啓動程式來套用更改。 PolyVectorDialog Polygon Properties 多邊形屬性 End Edit PolygonProps Polygon Properties 多邊形屬性 PolygonWidget % % A negative value will make the polygon concave (or star shaped), a positive value will make it convex 負數值將會使多邊形變爲凹形 (或者星形), 正數值將使它成爲凸形 Apply Convex/Concave Factor to change shape of Polygons 套用凹凸大小來改變多邊形的形狀 Apply &Factor 套用因式 (&F) Corn&ers: 角數 (&E): Degrees of rotation for polygons 多邊形的旋轉角度 &Factor: 因式 (&F): Number of corners for polygons 多邊形的角數 &Rotation: 旋轉 (&R): Sample Polygon 多邊形樣本 PolygonWidgetBase Form Corn&ers: 角數 (&E): Number of corners for polygons 多邊形的角數 &Rotation: 旋轉 (&R):