Subversion Repositories Scribus

Rev

Rev 12590 | Rev 12918 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
9729 cbradney 1
<?xml version="1.0" encoding="utf-8"?>
11411 mrdocs 2
<!DOCTYPE TS><TS version="1.1" language="de_DE">
192 Franz 3
<context>
12612 cbradney 4
    <name>@default</name>
12590 cbradney 5
    <message>
6
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
7
        <source>getColorNames() -&gt; list
8
 
9
Returns a list containing the names of all defined colors in the document.
10
If no document is open, returns a list of the default document colors.
11
</source>
12612 cbradney 12
        <translation type="obsolete">getColorNames() -&gt; list
12590 cbradney 13
 
14
Gibt eine Liste zurück, die alle vorhandenen Farben des aktuellen Dokuments enthält.
15
Wenn kein Dokument geöffnet ist, werden die Standardfarben zurückgegeben.</translation>
16
    </message>
17
    <message>
18
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
19
        <source>getColor(&quot;name&quot;) -&gt; tuple
20
 
21
Returns a tuple (C, M, Y, K) containing the four color components of the
22
color &quot;name&quot; from the current document. If no document is open, returns
23
the value of the named color from the default document colors.
24
 
25
May raise NotFoundError if the named color wasn&apos;t found.
26
May raise ValueError if an invalid color name is specified.
27
</source>
12612 cbradney 28
        <translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
12590 cbradney 29
 
30
Gibt eine Liste mit den vier Farbkomponenten der Farbe &quot;name&quot; im aktuellen
31
Dokument wieder. Wenn kein Dokument geöffnet ist, werden die Werte der
32
angegebenen Standardfarbe zurückgegeben.
33
 
34
Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
35
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
36
    </message>
37
    <message>
38
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
39
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
40
 
41
Returns a tuple (R,G,B) containing the three color components of the
42
color &quot;name&quot; from the current document, converted to the RGB color
43
space. If no document is open, returns the value of the named color
44
from the default document colors.
45
 
46
May raise NotFoundError if the named color wasn&apos;t found.
47
May raise ValueError if an invalid color name is specified.
48
</source>
12612 cbradney 49
        <translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
12590 cbradney 50
 
51
Returns a tuple (R,G,B) containing the three color components of the
52
color &quot;name&quot; from the current document, converted to the RGB color
53
space. If no document is open, returns the value of the named color
54
from the default document colors.
55
 
56
May raise NotFoundError if the named color wasn&apos;t found.
57
May raise ValueError if an invalid color name is specified.</translation>
58
    </message>
59
    <message>
60
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
61
        <source>changeColor(&quot;name&quot;, c, m, y, k)
62
 
63
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
64
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
65
Color components should be in the range from 0 to 255.
66
 
67
May raise NotFoundError if the named color wasn&apos;t found.
68
May raise ValueError if an invalid color name is specified.
69
</source>
12612 cbradney 70
        <translation type="obsolete">changeColor(&quot;name&quot;, c, m, y, k)
12590 cbradney 71
 
72
Ändert die Farbe &quot;name&quot; auf die angegeben CMYK-Werte. Die Abkürzungen
73
stehen für die vier Farben c=Cyan, m=Magenta, y=Yellow, b=Black.
74
Die Werte müssen zwischen 0 und 255 liegen.
75
 
76
Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
77
Wenn ein ungültiger Farbname angegeben wird, tritt der Fehler ValueError auf.</translation>
78
    </message>
79
    <message>
80
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
81
        <source>defineColor(&quot;name&quot;, c, m, y, k)
82
 
83
Defines a new color &quot;name&quot;. The color Value is defined via four components:
84
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
85
the range from 0 to 255.
86
 
87
May raise ValueError if an invalid color name is specified.
88
</source>
12612 cbradney 89
        <translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
12590 cbradney 90
 
91
Defines a new color &quot;name&quot;. The color Value is defined via four components:
92
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
93
the range from 0 to 255.
94
 
95
May raise ValueError if an invalid color name is specified.</translation>
96
    </message>
97
    <message>
98
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
99
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
100
 
101
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
102
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
103
&quot;None&quot; - transparent.
104
 
105
deleteColor works on the default document colors if there is no document open.
106
In that case, &quot;replace&quot;, if specified, has no effect.
107
 
108
May raise NotFoundError if a named color wasn&apos;t found.
109
May raise ValueError if an invalid color name is specified.
110
</source>
12612 cbradney 111
        <translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
12590 cbradney 112
 
113
Löscht die Farbe &quot;name&quot;. An allen Stellen, wo &quot;name&quot; im Dokument auftritt,
114
wird sie durch &quot;replace&quot; ersetzt. Standardmäßig ist &quot;replace&quot; gar keine Farbe -
115
Transparenz.
116
 
117
Sie können deleteColor auch verwenden, wenn kein Dokument geöffnet ist, dann
118
bleibt die Angabe von &quot;replace&quot; aber ohne Auswirkung.
119
 
120
Wenn die angegebene Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
121
Wenn der Farbname ungültig ist, tritt der Fehler ValueError auf.</translation>
122
    </message>
123
    <message>
124
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
125
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
126
 
127
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
128
 
129
May raise NotFoundError if a named color wasn&apos;t found.
130
May raise ValueError if an invalid color name is specified.
131
</source>
12612 cbradney 132
        <translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
12590 cbradney 133
 
134
An allen Stellen, wo die Farbe &quot;name&quot; vorkommt, wird sie duch die Farbe
135
&quot;replace&quot; ersetzt.
136
 
137
Wenn eine der Farben nicht vorhanden ist, tritt der Fehler NotFoundError auf.
138
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
139
    </message>
140
    <message>
141
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
142
        <source>newDocDialog() -&gt; bool
143
 
144
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
145
accepts the settings. Does not create a document if the user presses cancel.
146
Returns true if a new document was created.
147
</source>
12612 cbradney 148
        <translation type="obsolete">newDocDialog() -&gt; bool
12590 cbradney 149
 
150
Zeigt den Dialog \&quot;Neues Dokument\&quot; an. Damit können Sie ein neues Dokument erstellen, wenn der Benutzer die standardmäßigen Einstellung aktzeptiert. Erzeugt kein neues Dokument, wenn der Benutzer auf \&quot;Abbrechen\&quot; klickt.
151
Gibt den Wert \&quot;true\&quot; zurück, wenn ein neues Dokument erstellt wurde.</translation>
152
    </message>
153
    <message>
154
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
155
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
156
 
157
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
158
with the filter string &quot;filter&quot;. A default filename or file path can also
159
supplied, leave this string empty when you don&apos;t want to use it.  A value of
160
True for haspreview enables a small preview widget in the FileSelect box.  When
161
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
162
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
163
the dialog shows and returns only directories. The default for all of the
164
optional parameters is False.
165
 
166
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
167
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
168
 
169
Refer to the Qt-Documentation for QFileDialog for details on filters.
170
 
171
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
172
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
173
</source>
12612 cbradney 174
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filenameShows a File Open dialog box with the caption &quot;caption&quot;. Files are filteredwith the filter string &quot;filter&quot;. A default filename or file path can alsosupplied, leave this string empty when you don&apos;t want to use it.  A value ofTrue for haspreview enables a small preview widget in the FileSelect box.  Whenthe issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialogotherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is Truethe dialog shows and returns only directories. The default for all of theoptional parameters is False.The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.For example &apos;Images (*.png *.xpm *.jpg)&apos;.Refer to the Qt-Documentation for QFileDialog for details on filters.Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)</translation>
12590 cbradney 175
    </message>
176
    <message>
177
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
178
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
179
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
180
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
181
 
182
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
183
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
184
button, OK, is displayed. Only the caption and message arguments are required,
185
though setting an icon and appropriate button(s) is strongly
186
recommended. The message text may contain simple HTML-like markup.
187
 
188
Returns the number of the button the user pressed. Button numbers start
189
at 1.
190
 
191
For the icon and the button parameters there are predefined constants available
192
with the same names as in the Qt Documentation. These are the BUTTON_* and
193
ICON_* constants defined in the module. There are also two extra constants that
194
can be binary-ORed with button constants:
195
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
196
    BUTTONOPT_ESCAPE    Pressing escape presses this button.
197
 
198
Usage examples:
199
result = messageBox(&apos;Script failed&apos;,
200
                    &apos;This script only works when you have a text frame selected.&apos;,
201
                    ICON_ERROR)
202
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
203
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
204
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
205
 
206
Defined button and icon constants:
207
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
208
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
209
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
210
</source>
12612 cbradney 211
        <translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
12590 cbradney 212
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
213
Zeigt einen Dialog mit dem Titel &quot;caption&quot;, der Botschaft &quot;message&quot; und dem Symbol &quot;icon&quot; sowie
214
bis zu 3 Buttons an. Standard ist kein Symbol und ein OK-Button. Nur Titel und Botschaft sind
215
erforderliche Felder, aber Symbol und Buttons werden empfohlen.
216
Der Text der Botschaft kann auch einfachen HTML-Code enthalten.
217
Gibt die Nummer des Buttons wieder, der gedrückt wurde, beginnend mit 1.
218
Für Buttons und Symbole gibt es vordefinierte Konstanten, die gleichen wie in
219
der Qt-Dokumentation.
220
Die sind im Modul definiert und heißen BUTTON_* und ICON_* . Es gibt auch zwei
221
spezielle Konstanten, die auch den Wert 0 annehmen können: BUTTONOPT_DEFAULT aktiviert den
222
jeweiligen Button per Druck auf Enter.
223
BUTTONOPT_ESCAPE drückt die Escape-Taste falls dieser Button gedrückt wird.
224
Beispiel
225
result = messageBox(&apos;Script failed&apos;,&apos;This script only works when you have a text frame selected.&apos;,
226
ICON_ERROR)
227
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,ICON_WARNING,
228
BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
229
Konstanten für Buttons und Symbole:
230
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
231
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
232
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.</translation>
233
    </message>
234
    <message>
235
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
236
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string
237
 
238
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
239
Parameters: window title, text in the window and optional &apos;default&apos; value.
240
 
241
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
242
</source>
12612 cbradney 243
        <translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
12590 cbradney 244
 
245
Zeigt einen Dialog an, der einen String verlangt und zurückgibt.
246
Parameter: Fenstertitel, Text im Fenster und optionaler &apos;default&apos;-Text.
247
 
248
Beispiel: valueDialog(&apos;TItel&apos;, &apos;Text im Fenster&apos;, &apos;optional&apos;)</translation>
249
    </message>
250
    <message>
251
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
252
        <source>newStyleDialog() -&gt; string
253
 
254
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
255
style name or None when user cancels the dialog.
256
</source>
12612 cbradney 257
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
12590 cbradney 258
 
259
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
260
that the layer &quot;layer&quot; is visible, a value of False means that the layer
261
&quot;layer&quot; is invisible.
262
 
263
May raise NotFoundError if the layer can&apos;t be found.
264
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
265
    </message>
266
    <message>
267
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
268
        <source>newDocument(size, margins, orientation, firstPageNumber,
269
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool
270
 
271
Creates a new document and returns true if successful. The parameters have the
272
following meaning:
273
 
274
size = A tuple (width, height) describing the size of the document. You can
275
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
276
 
277
margins = A tuple (left, right, top, bottom) describing the document
278
margins
279
 
280
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
281
 
282
firstPageNumer = is the number of the first page in the document used for
283
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
284
numbers if you&apos;re creating a document in several parts.
285
 
286
unit: this value sets the measurement units used by the document. Use a
287
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
288
UNIT_PICAS, UNIT_POINTS.
289
 
290
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
291
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
292
PAGE_4 is 4-fold.
293
 
294
firstPageOrder = What is position of first page in the document.
295
Indexed from 0 (0 = first).
296
 
297
numPage = Number of pages to be created.
298
 
299
The values for width, height and the margins are expressed in the given unit
300
for the document. PAPER_* constants are expressed in points. If your document
301
is not in points, make sure to account for this.
302
 
303
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
304
PAGE_4, 3, 1)
305
 
306
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
307
</source>
12612 cbradney 308
        <translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
12590 cbradney 309
(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)unit, pagesType, firstPageOrder, numPages) -&gt; bool
310
 
311
Creates a new document and returns true if successful. The parameters have the(new line)
312
following meaning:(new line)
313
(new line)
314
size = A tuple (width, height) describing the size of the document. You can
315
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
316
 
317
margins = A tuple (left, right, top, bottom) describing the document
318
margins
319
 
320
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
321
 
322
firstPageNumer = is the number of the first page in the document used for
323
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
324
numbers if you&apos;re creating a document in several parts.
325
 
326
unit: this value sets the measurement units used by the document. Use a
327
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
328
UNIT_PICAS, UNIT_POINTS.
329
 
330
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
331
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
332
PAGE_4 is 4-fold.
333
 
334
firstPageOrder = What is position of first page in the document.
335
Indexed from 0 (0 = first).
336
 
337
numPage = Number of pages to be created.
338
 
339
The values for width, height and the margins are expressed in the given unit
340
for the document. PAPER_* constants are expressed in points. If your document
341
is not in points, make sure to account for this.
342
 
343
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
344
PAGE_4, 3, 1)
345
 
346
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.</translation>
347
    </message>
348
    <message>
349
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
350
        <source>newDoc(size, margins, orientation, firstPageNumber,
351
                   unit, facingPages, firstSideLeft) -&gt; bool
352
 
353
WARNING: Obsolete procedure! Use newDocument instead.
354
 
355
Creates a new document and returns true if successful. The parameters have the
356
following meaning:
357
 
358
    size = A tuple (width, height) describing the size of the document. You can
359
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
360
 
361
    margins = A tuple (left, right, top, bottom) describing the document
362
    margins
363
 
364
    orientation = the page orientation - constants PORTRAIT, LANDSCAPE
365
 
366
    firstPageNumer = is the number of the first page in the document used for
367
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
368
    numbers if you&apos;re creating a document in several parts.
369
 
370
    unit: this value sets the measurement units used by the document. Use a
371
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
372
    UNIT_PICAS, UNIT_POINTS.
373
 
374
    facingPages = FACINGPAGES, NOFACINGPAGES
375
 
376
    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
377
 
378
The values for width, height and the margins are expressed in the given unit
379
for the document. PAPER_* constants are expressed in points. If your document
380
is not in points, make sure to account for this.
381
 
382
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
383
                FACINGPAGES, FIRSTPAGERIGHT)
384
</source>
12612 cbradney 385
        <translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
12590 cbradney 386
                   unit, facingPages, firstSideLeft) -&gt; bool
387
 
388
WARNING: Obsolete procedure! Use newDocument instead.
389
 
390
Creates a new document and returns true if successful. The parameters have the
391
following meaning:
392
 
393
    size = A tuple (width, height) describing the size of the document. You can
394
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
395
 
396
    margins = A tuple (left, right, top, bottom) describing the document
397
    margins
398
 
399
    orientation = the page orientation - constants PORTRAIT, LANDSCAPE
400
 
401
    firstPageNumer = is the number of the first page in the document used for
402
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
403
    numbers if you&apos;re creating a document in several parts.
404
 
405
    unit: this value sets the measurement units used by the document. Use a
406
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
407
    UNIT_PICAS, UNIT_POINTS.
408
 
409
    facingPages = FACINGPAGES, NOFACINGPAGES
410
 
411
    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
412
 
413
The values for width, height and the margins are expressed in the given unit
414
for the document. PAPER_* constants are expressed in points. If your document
415
is not in points, make sure to account for this.
416
 
417
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
418
                FACINGPAGES, FIRSTPAGERIGHT)
419
</translation>
420
    </message>
421
    <message>
422
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
423
        <source>closeDoc()
424
 
425
Closes the current document without prompting to save.
426
 
427
May throw NoDocOpenError if there is no document to close
428
</source>
12612 cbradney 429
        <translation type="obsolete">closeDoc()
12590 cbradney 430
 
431
Schließt das aktuelle Dokument, ohne Änderungen zu sichern.
432
 
433
Wenn kein Dokument offen ist, tritt der Fehler NoDocOpenError auf</translation>
434
    </message>
435
    <message>
436
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
437
        <source>haveDoc() -&gt; bool
438
 
439
Returns true if there is a document open.
440
</source>
12612 cbradney 441
        <translation type="obsolete">haveDoc() -&gt; bool
12590 cbradney 442
 
443
Gibt True zurück, wenn ein Dokument geöffnet ist.</translation>
444
    </message>
445
    <message>
446
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
447
        <source>openDoc(&quot;name&quot;)
448
 
449
Opens the document &quot;name&quot;.
450
 
451
May raise ScribusError if the document could not be opened.
452
</source>
12612 cbradney 453
        <translation type="obsolete">openDoc(&quot;name&quot;)
12590 cbradney 454
 
455
Öffnet das Dokument &quot;name&quot;.
456
 
457
Schlägt das fehl, tritt der Fehler ScribusError auf.</translation>
458
    </message>
459
    <message>
460
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
461
        <source>saveDoc()
462
 
463
Saves the current document with its current name, returns true if successful.
464
If the document has not already been saved, this may bring up an interactive
465
save file dialog.
466
 
467
If the save fails, there is currently no way to tell.
468
</source>
12612 cbradney 469
        <translation type="obsolete">saveDoc()
12590 cbradney 470
 
471
Speichert das Dokument unter dem aktuellen Namen und gibt True zurück, wenn das
472
erfolgreich war. Wurde das Dokument noch nicht gesichert, öffnet sich der &quot;Speichern&quot;-
473
Dialog.
474
 
475
Wenn das Sichern fehlschlägt, erscheint derzeit keine Fehlermeldung.</translation>
476
    </message>
477
    <message>
478
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
479
        <source>saveDocAs(&quot;name&quot;)
480
 
481
Saves the current document under the new name &quot;name&quot; (which may be a full or
482
relative path).
483
 
484
May raise ScribusError if the save fails.
485
</source>
12612 cbradney 486
        <translation type="obsolete">saveDocAs(&quot;name&quot;)
12590 cbradney 487
 
488
Speichert das aktuelle Dokument unter dem neuen Namen &quot;name&quot;. Die Pfadangabe kann dabei
489
relativ oder absolut sein.
490
 
491
Schlägt das Sichern fehl, tritt der Fehler ScribusError auf.</translation>
492
    </message>
493
    <message>
494
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
495
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
496
 
497
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
498
strings.
499
</source>
12612 cbradney 500
        <translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
12590 cbradney 501
 
502
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
503
strings.</translation>
504
    </message>
505
    <message>
506
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
507
        <source>setMargins(lr, rr, tr, br)
508
 
509
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
510
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
511
constants.
512
</source>
12612 cbradney 513
        <translation type="obsolete">setMargins(lr, rr, tr, br)Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)margins are given in the measurement units of the document - see UNIT_&lt;type&gt;constants.</translation>
12590 cbradney 514
    </message>
515
    <message>
516
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
517
        <source>setUnit(type)
518
 
519
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
520
defined as constants UNIT_&lt;type&gt;.
521
 
522
May raise ValueError if an invalid unit is passed.
523
</source>
12612 cbradney 524
        <translation type="obsolete">setUnit(type)
12590 cbradney 525
 
526
Ändert die Maßeinheit des Dokuments auf &quot;type&quot;. Mögliche Einheiten geben Sie durch die
527
Konstanten UNIT_&lt;type&gt; an.
528
 
529
Ist die Einheit ungültig, tritt der Fehler ValueError auf.</translation>
530
    </message>
531
    <message>
532
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
533
        <source>getUnit() -&gt; integer (Scribus unit constant)
534
 
535
Returns the measurement units of the document. The returned value will be one
536
of the UNIT_* constants:
537
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
538
</source>
12612 cbradney 539
        <translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
12590 cbradney 540
 
541
Gibt die Maßeinheit des Dokuments zurück. Der Rückgabewert ist eine
542
der möglichen UNIT_*-Konstanten:
543
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
544
    </message>
545
    <message>
546
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
547
        <source>loadStylesFromFile(&quot;filename&quot;)
548
 
549
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
550
current document.
551
</source>
12612 cbradney 552
        <translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
12590 cbradney 553
 
554
Lädt die Absatzstile aus der Datei &quot;filename&quot; in das aktuelle Dokument.</translation>
555
    </message>
556
    <message>
557
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
558
        <source>setDocType(facingPages, firstPageLeft)
559
 
560
Sets the document type. To get facing pages set the first parameter to
561
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
562
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
563
a right page use FIRSTPAGERIGHT.
564
</source>
12612 cbradney 565
        <translation type="obsolete">setDocType(facingPages, firstPageLeft)
12590 cbradney 566
 
567
Setzt den Dokumenttyp. Gegenüberliegende Seiten erreichen Sie mit FACINGPAGES, normale
568
Seiten mit NOFACINGPAGES. Wenn die erste Seite links sein soll, schreiben Sie FIRSTPAGELEFT,
569
ansonsten FIRSTPAGERIGHT.</translation>
570
    </message>
571
    <message>
572
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
573
        <source>closeMasterPage()
574
 
575
Closes the currently active master page, if any, and returns editing
576
to normal. Begin editing with editMasterPage().
577
</source>
12612 cbradney 578
        <translation type="obsolete">closeMasterPage()
12590 cbradney 579
 
580
Closes the currently active master page, if any, and returns editing
581
to normal. Begin editing with editMasterPage().</translation>
582
    </message>
583
    <message>
584
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
585
        <source>masterPageNames()
586
 
587
Returns a list of the names of all master pages in the document.
588
</source>
12612 cbradney 589
        <translation type="obsolete">masterPageNames()(new line)
12590 cbradney 590
(new line)
591
Returns a list of the names of all master pages in the document.</translation>
592
    </message>
593
    <message>
594
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
595
        <source>editMasterPage(pageName)
596
 
597
Enables master page editing and opens the named master page
598
for editing. Finish editing with closeMasterPage().
599
</source>
12612 cbradney 600
        <translation type="obsolete">editMasterPage(pageName)(new line)
12590 cbradney 601
(new line)
602
Enables master page editing and opens the named master page(new line)
603
for editing. Finish editing with closeMasterPage().</translation>
604
    </message>
605
    <message>
606
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
607
        <source>createMasterPage(pageName)
608
 
609
Creates a new master page named pageName and opens it for
610
editing.
611
</source>
12612 cbradney 612
        <translation type="obsolete">createMasterPage(pageName)(new line)
12590 cbradney 613
(new line)
614
Creates a new master page named pageName and opens it for(new line)
615
editing.</translation>
616
    </message>
617
    <message>
618
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
619
        <source>deleteMasterPage(pageName)
620
 
621
Delete the named master page.
622
</source>
12612 cbradney 623
        <translation type="obsolete">deleteMasterPage(pageName)(new line)
12590 cbradney 624
(new line)
625
Delete the named master page.</translation>
626
    </message>
627
    <message>
628
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
629
        <source>getFillColor([&quot;name&quot;]) -&gt; string
630
 
631
Returns the name of the fill color of the object &quot;name&quot;.
632
If &quot;name&quot; is not given the currently selected item is used.
633
</source>
12612 cbradney 634
        <translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string
12590 cbradney 635
 
636
Gibt den Wert der Füllfarbe des Objekts &quot;name&quot; zurück.
637
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuell ausgewählt Objekt verwendet.</translation>
638
    </message>
639
    <message>
640
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
641
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float
642
 
643
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
644
is not given the currently selected Item is used.
645
</source>
12612 cbradney 646
        <translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float
12590 cbradney 647
 
648
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
649
is not given the currently selected Item is used.</translation>
650
    </message>
651
    <message>
652
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
653
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
654
 
655
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
656
is not given the currently selected Item is used.
657
</source>
12612 cbradney 658
        <translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer
12590 cbradney 659
 
660
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
661
is not given the currently selected Item is used.</translation>
662
    </message>
663
    <message>
664
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
665
        <source>getLineColor([&quot;name&quot;]) -&gt; string
666
 
667
Returns the name of the line color of the object &quot;name&quot;.
668
If &quot;name&quot; is not given the currently selected item is used.
669
</source>
12612 cbradney 670
        <translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
12590 cbradney 671
 
672
Gibt den Namen der Linienfarbe des Objekts &quot;name&quot; zurück.
673
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
674
    </message>
675
    <message>
676
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
677
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float
678
 
679
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
680
is not given the currently selected Item is used.
681
</source>
12612 cbradney 682
        <translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float
12590 cbradney 683
 
684
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
685
is not given the currently selected Item is used.</translation>
686
    </message>
687
    <message>
688
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
689
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
690
 
691
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
692
is not given the currently selected Item is used.
693
</source>
12612 cbradney 694
        <translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer
12590 cbradney 695
 
696
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
697
is not given the currently selected Item is used.</translation>
698
    </message>
699
    <message>
700
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
701
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer
702
 
703
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
704
is not given the currently selected Item is used.
705
</source>
12612 cbradney 706
        <translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
12590 cbradney 707
 
708
Gibt die Linienbreite des Objekts &quot;name&quot; zurück.
709
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
710
    </message>
711
    <message>
712
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
713
        <source>getLineShade([&quot;name&quot;]) -&gt; integer
714
 
715
Returns the shading value of the line color of the object &quot;name&quot;.
716
If &quot;name&quot; is not given the currently selected item is used.
717
</source>
12612 cbradney 718
        <translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
12590 cbradney 719
 
720
Gibt den Tonwert des Objekts &quot;name&quot; zurück.
721
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
722
    </message>
723
    <message>
724
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
725
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
726
 
727
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
728
the currently selected item is used.  The join types are:
729
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
730
</source>
12612 cbradney 731
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not giventhe currently selected item is used.  The join types are:JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
12590 cbradney 732
    </message>
733
    <message>
734
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
735
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
736
 
737
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
738
currently selected item is used. The cap types are:
739
CAP_FLAT, CAP_ROUND, CAP_SQUARE
740
</source>
12612 cbradney 741
        <translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (siehe Konstanten)
12590 cbradney 742
 
743
Gibt den Stil der Linienrundungen des Objekts &quot;name&quot; an. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.
744
Die unterstützten Stile sind CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
745
    </message>
746
    <message>
747
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
748
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
749
 
750
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
751
currently selected item is used. Line style constants are:
752
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
753
</source>
12612 cbradney 754
        <translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (siehe Konstanten)
12590 cbradney 755
 
756
Gibt den Linienstil des Objekts &quot;name&quot; wieder. Ist &quot;name&quot; nicht angegeben,
757
wird das aktuelle Objekt benutzt. Linienstile sind LINE_DASH, LINE_DASHDOT,
758
LINE_DASHDOTDOT, LINE_SOLID</translation>
759
    </message>
760
    <message>
761
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
762
        <source>getFillShade([&quot;name&quot;]) -&gt; integer
763
 
764
Returns the shading value of the fill color of the object &quot;name&quot;.
765
If &quot;name&quot; is not given the currently selected item is used.
766
</source>
12612 cbradney 767
        <translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
12590 cbradney 768
 
769
Gibt den Tonwert der Füllfarbe von &quot;name&quot; zurück. Ist &quot;name&quot; nicht angegeben, wird
770
das aktuelle Objekt verwendet.</translation>
771
    </message>
772
    <message>
773
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
774
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer
775
 
776
Returns the corner radius of the object &quot;name&quot;. The radius is
777
expressed in points. If &quot;name&quot; is not given the currently
778
selected item is used.
779
</source>
12612 cbradney 780
        <translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
12590 cbradney 781
 
782
Returns the corner radius of the object &quot;name&quot;. The radius is
783
expressed in points. If &quot;name&quot; is not given the currently
784
selected item is used.</translation>
785
    </message>
786
    <message>
787
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
788
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
789
 
790
Returns a (x, y) tuple containing the scaling values of the image frame
791
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
792
</source>
12612 cbradney 793
        <translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)(
12590 cbradney 794
 
795
Gibt ein Zahlenpaar (x,y) zurück mit den Skalierungswerten des Bildes im Rahmen
796
&quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Rahmen verwendet.</translation>
797
    </message>
798
    <message>
799
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
800
        <source>getImageName([&quot;name&quot;]) -&gt; string
801
 
802
Returns the filename for the image in the image frame. If &quot;name&quot; is not
803
given the currently selected item is used.
804
</source>
12612 cbradney 805
        <translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
12590 cbradney 806
 
807
Gibt den Dateinamen des Bildes im Rahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
808
angegeben, wird das aktuelle Objekt benutzt.</translation>
809
    </message>
810
    <message>
811
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
812
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)
813
 
814
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
815
If &quot;name&quot; is not given the currently selected item is used.
816
The position is expressed in the actual measurement unit of the document
817
- see UNIT_&lt;type&gt; for reference.
818
</source>
12612 cbradney 819
        <translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
12590 cbradney 820
 
821
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
822
If &quot;name&quot; is not given the currently selected item is used.
823
The position is expressed in the actual measurement unit of the document
824
- see UNIT_&lt;type&gt; for reference.</translation>
825
    </message>
826
    <message>
827
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
828
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)
829
 
830
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
831
If &quot;name&quot; is not given the currently selected item is used. The size is
832
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
833
for reference.
834
</source>
12612 cbradney 835
        <translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (Breite,Höhe)
12590 cbradney 836
 
837
Gibt das Zahlenpaar (Breite,Höhe) des Objekts &quot;name&quot; zurück. Ist &quot;name&quot; nicht
838
angegeben, wird das aktuelle Objekt verwendet. Die Größe wird in der Maßeinheit
839
des Dokuments angegeben - siehe die UNIT_*-Konstanten.</translation>
840
    </message>
841
    <message>
842
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
843
        <source>getRotation([&quot;name&quot;]) -&gt; integer
844
 
845
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
846
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
847
is used.
848
</source>
12612 cbradney 849
        <translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
12590 cbradney 850
 
851
Gibt die Drehung des Objekts &quot;name&quot; in Grad zurück und im Uhrzeigersinn zurück.
852
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
853
    </message>
854
    <message>
855
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
856
        <source>getAllObjects() -&gt; list
857
 
858
Returns a list containing the names of all objects on the current page.
859
</source>
12612 cbradney 860
        <translation type="obsolete">getAllObjects() -&gt; list
12590 cbradney 861
 
862
Gibt eine Liste zurück mit allen auf der aktuellen Seite verwendeten Objekte.</translation>
863
    </message>
864
    <message>
865
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
866
        <source>getPropertyCType(object, property, includesuper=True)
867
 
868
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
869
for details of arguments.
870
 
871
If `includesuper&apos; is true, search inherited properties too.
872
</source>
12612 cbradney 873
        <translation type="obsolete">getPropertyCType(object, property, includesuper=True)
12590 cbradney 874
 
875
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
876
for details of arguments.
877
 
878
If `includesuper&apos; is true, search inherited properties too.</translation>
879
    </message>
880
    <message>
881
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
882
        <source>getPropertyNames(object, includesuper=True)
883
 
884
Return a list of property names supported by `object&apos;.
885
If `includesuper&apos; is true, return properties supported
886
by parent classes as well.
887
</source>
12612 cbradney 888
        <translation type="obsolete">getPropertyNames(object, includesuper=True)
12590 cbradney 889
 
890
Return a list of property names supported by `object&apos;.
891
If `includesuper&apos; is true, return properties supported
892
by parent classes as well.</translation>
893
    </message>
894
    <message>
895
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
896
        <source>getProperty(object, property)
897
 
898
Return the value of the property `property&apos; of the passed `object&apos;.
899
 
900
The `object&apos; argument may be a string, in which case the named PageItem
901
is searched for. It may also be a PyCObject, which may point to any
902
C++ QObject instance.
903
 
904
The `property&apos; argument must be a string, and is the name of the property
905
to look up on `object&apos;.
906
 
907
The return value varies depending on the type of the property.
908
</source>
12612 cbradney 909
        <translation type="obsolete">getProperty(object, property)
12590 cbradney 910
 
911
Return the value of the property `property&apos; of the passed `object&apos;.
912
 
913
The `object&apos; argument may be a string, in which case the named PageItem
914
is searched for. It may also be a PyCObject, which may point to any
915
C++ QObject instance.
916
 
917
The `property&apos; argument must be a string, and is the name of the property
918
to look up on `object&apos;.
919
 
920
The return value varies depending on the type of the property.</translation>
921
    </message>
922
    <message>
923
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
924
        <source>setProperty(object, property, value)
925
 
926
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
927
compatible with the type of `property&apos;, an exception is raised. An exception may
928
also be raised if the underlying setter fails.
929
 
930
See getProperty() for more information.
931
</source>
12612 cbradney 932
        <translation type="obsolete">setProperty(object, property, value)
12590 cbradney 933
 
934
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
935
compatible with the type of `property&apos;, an exception is raised. An exception may
936
also be raised if the underlying setter fails.
937
 
938
See getProperty() for more information.</translation>
939
    </message>
940
    <message>
941
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
942
        <source>moveObject(dx, dy [, &quot;name&quot;])
943
 
944
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
945
distances are expressed in the current measurement unit of the document (see
946
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
947
If the object &quot;name&quot; belongs to a group, the whole group is moved.
948
</source>
12612 cbradney 949
        <translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])
12590 cbradney 950
 
951
Verschiebt das Objekt &quot;name&quot; um dx und dy relativ zur Position. Die
952
Entfernungsangaben werden in der Maßeinheit des Dokuments
953
angegeben (siehe Konstanten UNIT*). Wenn &quot;name&quot; nicht vorhanden ist,
954
wird das ausgewählte Objekt verschoben und wenn &quot;name&quot; zu einer Gruppe
955
gehört, wird die gesamte Gruppe verschoben.</translation>
956
    </message>
957
    <message>
958
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
959
        <source>moveObjectAbs(x, y [, &quot;name&quot;])
960
 
961
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
962
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
963
is not given the currently selected item is used.  If the object &quot;name&quot;
964
belongs to a group, the whole group is moved.
965
</source>
12612 cbradney 966
        <translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
12590 cbradney 967
 
968
Bewegt das Objekt &quot;name&quot; an die neue Stelle. Die Koordinaten werden in der Maßeinheit
969
des Dokuments angegeben (siehe UNIT_*-Konstanten). Ist &quot;name&quot; nicht angegeben, wird das
970
aktuelle Objekt benutzt. Gehört &quot;name&quot; zu einer Gruppe, wird die Gruppe verschoben.</translation>
971
    </message>
972
    <message>
973
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
974
        <source>rotateObject(rot [, &quot;name&quot;])
975
 
976
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
977
rotated by the vertex that is currently selected as the rotation point - by
978
default, the top left vertex at zero rotation. Positive values mean counter
979
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
980
given the currently selected item is used.
981
</source>
12612 cbradney 982
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object isrotated by the vertex that is currently selected as the rotation point - bydefault, the top left vertex at zero rotation. Positive values mean counterclockwise rotation when the default rotation point is used. If &quot;name&quot; is notgiven the currently selected item is used.</translation>
12590 cbradney 983
    </message>
984
    <message>
985
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
986
        <source>rotateObjectAbs(rot [, &quot;name&quot;])
987
 
988
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
989
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
990
selected item is used.
991
</source>
12612 cbradney 992
        <translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
12590 cbradney 993
 
994
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
995
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
996
selected item is used.</translation>
997
    </message>
998
    <message>
999
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
1000
        <source>sizeObject(width, height [, &quot;name&quot;])
1001
 
1002
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
1003
is not given the currently selected item is used.
1004
</source>
12612 cbradney 1005
        <translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
12590 cbradney 1006
 
1007
Ändert die Größe von &quot;name&quot; auf die Breite width und die Höhe height.
1008
ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
1009
    </message>
1010
    <message>
1011
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
1012
        <source>getSelectedObject([nr]) -&gt; string
1013
 
1014
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
1015
of the selected object, e.g. 0 means the first selected object, 1 means the
1016
second selected Object and so on.
1017
</source>
12612 cbradney 1018
        <translation type="obsolete">getSelectedObject([nr]) -&gt; string
12590 cbradney 1019
 
1020
Gibt den Namen des ausgewählten Objekts zurück. &quot;nr&quot; gibt die Zahl des gewählten
1021
Objekts an. 0 bedeutet das erste ausgewählte Objekt, 1 das zweite usw.</translation>
1022
    </message>
1023
    <message>
1024
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
1025
        <source>selectionCount() -&gt; integer
1026
 
1027
Returns the number of selected objects.
1028
</source>
12612 cbradney 1029
        <translation type="obsolete">selectionCount() -&gt; integer
12590 cbradney 1030
 
1031
Gibt die Anzahl der ausgewählten Objekte zurück.</translation>
1032
    </message>
1033
    <message>
1034
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
1035
        <source>selectObject(&quot;name&quot;)
1036
 
1037
Selects the object with the given &quot;name&quot;.
1038
</source>
12612 cbradney 1039
        <translation type="obsolete">selectObject(&quot;name&quot;)
12590 cbradney 1040
 
1041
Wählt das Objekt &quot;name&quot; aus.</translation>
1042
    </message>
1043
    <message>
1044
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
1045
        <source>deselectAll()
1046
 
1047
Deselects all objects in the whole document.
1048
</source>
12612 cbradney 1049
        <translation type="obsolete">deselectAll()
12590 cbradney 1050
 
1051
Setzt alle Objekte im Dokument auf nicht ausgewählt.</translation>
1052
    </message>
1053
    <message>
1054
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
1055
        <source>groupObjects(list)
1056
 
1057
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
1058
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
1059
items are used.
1060
</source>
12612 cbradney 1061
        <translation type="obsolete">groupObjects(list)
12590 cbradney 1062
 
1063
Gruppiert die Elemente in &quot;list&quot;. &quot;list&quot; muss die Namen der zu gruppierenden
1064
Objekte enthalten. Ist &quot;list&quot; nicht angegeben, werden die aktuell gewählten
1065
Objekte verwendet.</translation>
1066
    </message>
1067
    <message>
1068
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
1069
        <source>unGroupObjects(&quot;name&quot;)
1070
 
1071
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
12612 cbradney 1072
        <translation type="obsolete">unGroupObjects(&quot;name&quot;)
12590 cbradney 1073
 
1074
Zerstört die Gruppe &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird die aktuelle Gruppe verwendet.</translation>
1075
    </message>
1076
    <message>
1077
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
1078
        <source>scaleGroup(factor [,&quot;name&quot;])
1079
 
1080
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
1081
the group, values smaller than 1 make the group smaller e.g a value of 0.5
1082
scales the group to 50 % of its original size, a value of 1.5 scales the group
1083
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
1084
0. If &quot;name&quot; is not given the currently selected item is used.
1085
 
1086
May raise ValueError if an invalid scale factor is passed.
1087
</source>
12612 cbradney 1088
        <translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
12590 cbradney 1089
 
1090
Skaliert die Gruppe, zu dem das Objekt &quot;name&quot; gehört. Werte größer als 1 vergrößern das Objekt,
1091
Werte kleiner als 1 verkleinert das Objekt. Zum Beispiel bedeutet 0.5 = 50 % oder 1.5=150% der
1092
Originalgröße. &quot;factor&quot; muss größer als 0 sein. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
1093
benutzt.</translation>
1094
    </message>
1095
    <message>
1096
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
1097
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
1098
 
1099
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
1100
not given the currently selected item is used.
1101
 
1102
May raise WrongFrameTypeError if the target frame is not an image frame
1103
</source>
12612 cbradney 1104
        <translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
12590 cbradney 1105
 
1106
Lädt das Bild &quot;picture&quot; in den Bildrahmen &quot;name&quot;. Ist &quot;name&quot; nicht angegeben,
1107
wird der aktuelle Rahmen benutzt.
1108
 
1109
Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf</translation>
1110
    </message>
1111
    <message>
1112
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
1113
        <source>scaleImage(x, y [, &quot;name&quot;])
1114
 
1115
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
1116
If &quot;name&quot; is not given the currently selected item is used. A number of 1
1117
means 100 %.
1118
 
1119
May raise WrongFrameTypeError if the target frame is not an image frame
1120
</source>
12612 cbradney 1121
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
12590 cbradney 1122
 
1123
Skaliert das Bild &quot;name&quot; auf die angegeben Werte. 1 bedeutet 100 %. Ist &quot;name&quot;
1124
nicht angegeben, wird der aktuelle Bildrahmen verwendet.
1125
 
1126
Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf,</translation>
1127
    </message>
1128
    <message>
1129
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
1130
        <source>lockObject([&quot;name&quot;]) -&gt; bool
1131
 
1132
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
1133
If &quot;name&quot; is not given the currently selected item is used. Returns true
1134
if locked.
1135
</source>
12612 cbradney 1136
        <translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
12590 cbradney 1137
 
1138
Sperrt das Objekt &quot;name&quot;, wenn es freigegeben ist und entsperrt es, wenn es
1139
gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
1140
Gibt True zurück, wenn das Objekt gesperrt ist.</translation>
1141
    </message>
1142
    <message>
1143
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
1144
        <source>isLocked([&quot;name&quot;]) -&gt; bool
1145
 
1146
Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
1147
currently selected item is used.
1148
</source>
12612 cbradney 1149
        <translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
12590 cbradney 1150
 
1151
Gibt True zurück, wenn &quot;name&quot; gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
1152
Objekt verwendet.</translation>
1153
    </message>
1154
    <message>
1155
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
1156
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
1157
 
1158
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
1159
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
1160
Both `scaletoframe&apos; and `proportional&apos; are boolean.
1161
 
1162
May raise WrongFrameTypeError.
1163
</source>
12612 cbradney 1164
        <translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
12590 cbradney 1165
 
1166
Setzt die Eigenschaft An Rahmen anpassen für den gewählten Bildrahmen oder angegebenen
1167
Bildrahmen.
1168
&apos;proportional&apos; verkleinert das Bild proportional zur ursprünglichen Größe.
1169
Sowohl &apos;scaletoframe&apos; als auch &apos;proportional&apos; sind boolsche Werte.
1170
 
1171
Kann den Fehler WrongFrameTypeError verursachen.</translation>
1172
    </message>
1173
    <message>
1174
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
1175
        <source>setRedraw(bool)
1176
 
1177
Disables page redraw when bool = False, otherwise redrawing is enabled.
1178
This change will persist even after the script exits, so make sure to call
1179
setRedraw(True) in a finally: clause at the top level of your script.
1180
</source>
12612 cbradney 1181
        <translation type="obsolete">setRedraw(bool)
12590 cbradney 1182
 
1183
Wenn bool=False, dann wird die Seite nicht neu neu aufgebaut (redraw ist deaktiviert).
1184
Standard ist bool=True. Diese Einstellung bleibt bestehen, auch wenn das Script beendet ist.
1185
Stellen Sie also sicher, dass setRedraw(True) aufgerufen wird, bevor das Script beendet wird.</translation>
1186
    </message>
1187
    <message>
1188
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
1189
        <source>getFontNames() -&gt; list
1190
 
1191
Returns a list with the names of all available fonts.
1192
</source>
12612 cbradney 1193
        <translation type="obsolete">getFontNames() -&gt; list
12590 cbradney 1194
 
1195
Gibt eine Liste mit allen verfügbaren Schriften zurück.</translation>
1196
    </message>
1197
    <message>
1198
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
1199
        <source>getXFontNames() -&gt; list of tuples
1200
 
1201
Returns a larger font info. It&apos;s a list of the tuples with:
1202
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
1203
</source>
12612 cbradney 1204
        <translation type="obsolete">getXFontNames() -&gt; list
12590 cbradney 1205
 
1206
Gibt genaue Informationen zu einer Schrift zurück mit den Werten:
1207
[ (Name in Scribus, Familie, wirklicher Name, Subset (1|0), embed PS (1|0), Fontdatei), (...), ... ]</translation>
1208
    </message>
1209
    <message>
1210
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
1211
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
1212
 
1213
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
1214
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
1215
image data is returned as a string. The optional &quot;format&quot; argument
1216
specifies the image format to generate, and supports any format allowed
1217
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
1218
 
1219
May raise NotFoundError if the specified font can&apos;t be found.
1220
May raise ValueError if an empty sample or filename is passed.
1221
</source>
12612 cbradney 1222
        <translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
12590 cbradney 1223
 
1224
Erzeugt ein Bild mit dem Text &quot;sample&quot; in der Schrift &quot;font&quot; und der Größe &quot;size&quot;.
1225
Ist &quot;filename&quot; angegeben, wird das Bild unter &quot;filename&quot; abgespeichert. Ansonsten
1226
werden die Bilddaten als String zurückgegeben. Das optionale Argument &quot;format&quot; gibt
1227
an, welches Bildformat generiert werden soll. Unterstützt werden die Formate, die auch
1228
QPixmap.save() kennt, zum Beispiel PPM, JPEG, PNG und XPM.
1229
 
1230
Der Fehler NotFoundError tritt auf, wenn die Schrift nicht gefunden wird.
1231
Der Fehler ValueError tritt auf, wenn &quot;sample&quot; leer ist oder der Dateiname ungültig ist.</translation>
1232
    </message>
1233
    <message>
1234
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
1235
        <source>getLayers() -&gt; list
1236
 
1237
Returns a list with the names of all defined layers.
1238
</source>
12612 cbradney 1239
        <translation type="obsolete">getLayers() -&gt; list
12590 cbradney 1240
 
1241
Gibt eine Liste mit allen Ebenen zurück.</translation>
1242
    </message>
1243
    <message>
1244
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
1245
        <source>setActiveLayer(&quot;name&quot;)
1246
 
1247
Sets the active layer to the layer named &quot;name&quot;.
1248
 
1249
May raise NotFoundError if the layer can&apos;t be found.
1250
May raise ValueError if the layer name isn&apos;t acceptable.
1251
</source>
12612 cbradney 1252
        <translation type="obsolete">setActiveLayer(&quot;name&quot;)
12590 cbradney 1253
 
1254
Macht die Ebene &quot;name&quot; zur aktiven Ebene.
1255
 
1256
Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
1257
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
1258
    </message>
1259
    <message>
1260
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
1261
        <source>getActiveLayer() -&gt; string
1262
 
1263
Returns the name of the current active layer.
1264
</source>
12612 cbradney 1265
        <translation type="obsolete">getActiveLayer() -&gt; string
12590 cbradney 1266
 
1267
Gibt die aktive Ebene zurück.</translation>
1268
    </message>
1269
    <message>
1270
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
1271
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
1272
 
1273
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
1274
If &quot;name&quot; is not given the currently selected item is used.
1275
 
1276
May raise NotFoundError if the layer can&apos;t be found.
1277
May raise ValueError if the layer name isn&apos;t acceptable.
1278
</source>
12612 cbradney 1279
        <translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
12590 cbradney 1280
 
1281
Verschiebt das Objekt &quot;name&quot; auf die Ebene &quot;layer&quot;. Die Ebene muss
1282
vorhanden sein. Ist &quot;name&quot; nicht angegeben, wird das aktive Objekt benutzt.
1283
 
1284
Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
1285
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
1286
    </message>
1287
    <message>
1288
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
1289
        <source>setLayerVisible(&quot;layer&quot;, visible)
1290
 
1291
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
1292
the layer is invisible.
1293
 
1294
May raise NotFoundError if the layer can&apos;t be found.
1295
May raise ValueError if the layer name isn&apos;t acceptable.
1296
</source>
12612 cbradney 1297
        <translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
12590 cbradney 1298
 
1299
Zeigt die Ebene &quot;layer&quot; an oder versteckt sie. Ist &quot;visible&quot; auf False gesetzt,
1300
ist die Ebene unsichtbar.
1301
 
1302
Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
1303
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
1304
    </message>
1305
    <message>
1306
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
1307
        <source>setLayerPrintable(&quot;layer&quot;, printable)
1308
 
1309
Sets the layer &quot;layer&quot; to be printable or not. If is the
1310
printable set to false the layer won&apos;t be printed.
1311
 
1312
May raise NotFoundError if the layer can&apos;t be found.
1313
May raise ValueError if the layer name isn&apos;t acceptable.
1314
</source>
12612 cbradney 1315
        <translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
12590 cbradney 1316
 
1317
Sets the layer &quot;layer&quot; to be printable or not. If is the
1318
printable set to false the layer won&apos;t be printed.
1319
 
1320
May raise NotFoundError if the layer can&apos;t be found.
1321
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1322
    </message>
1323
    <message>
1324
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
1325
        <source>setLayerLocked(&quot;layer&quot;, locked)
1326
 
1327
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
1328
true the layer will be locked.
1329
 
1330
May raise NotFoundError if the layer can&apos;t be found.
1331
May raise ValueError if the layer name isn&apos;t acceptable.
1332
</source>
12612 cbradney 1333
        <translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)
12590 cbradney 1334
 
1335
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
1336
true the layer will be locked.
1337
 
1338
May raise NotFoundError if the layer can&apos;t be found.
1339
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1340
    </message>
1341
    <message>
1342
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
1343
        <source>setLayerOutlined(&quot;layer&quot;, outline)
1344
 
1345
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
1346
true the layer will be displayed outlined.
1347
 
1348
May raise NotFoundError if the layer can&apos;t be found.
1349
May raise ValueError if the layer name isn&apos;t acceptable.
1350
</source>
12612 cbradney 1351
        <translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
12590 cbradney 1352
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
1353
true the layer will be displayed outlined.
1354
May raise NotFoundError if the layer can&apos;t be found.
1355
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1356
    </message>
1357
    <message>
1358
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
1359
        <source>setLayerFlow(&quot;layer&quot;, flow)
1360
 
1361
Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
1362
true text in layers above this one will flow around objects on this layer.
1363
 
1364
May raise NotFoundError if the layer can&apos;t be found.
1365
May raise ValueError if the layer name isn&apos;t acceptable.
1366
</source>
12612 cbradney 1367
        <translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
12590 cbradney 1368
Sets the layers &quot;layer&quot;(sp)(sp)flowcontrol to flow. If flow is set to
1369
true text in layers above this one will flow around objects on this layer.
1370
May raise NotFoundError if the layer can&apos;t be found.
1371
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1372
    </message>
1373
    <message>
1374
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
1375
        <source>setLayerBlendmode(&quot;layer&quot;, blend)
1376
 
1377
Sets the layers &quot;layer&quot;  blendmode to blend.
1378
 
1379
May raise NotFoundError if the layer can&apos;t be found.
1380
May raise ValueError if the layer name isn&apos;t acceptable.
1381
</source>
12612 cbradney 1382
        <translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
12590 cbradney 1383
Sets the layers &quot;layer&quot;(sp)(sp)blendmode to blend.
1384
May raise NotFoundError if the layer can&apos;t be found.
1385
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1386
    </message>
1387
    <message>
1388
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
1389
        <source>setLayerTransparency(&quot;layer&quot;, trans)
1390
 
1391
Sets the layers &quot;layer&quot;  transparency to trans.
1392
 
1393
May raise NotFoundError if the layer can&apos;t be found.
1394
May raise ValueError if the layer name isn&apos;t acceptable.
1395
</source>
12612 cbradney 1396
        <translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
12590 cbradney 1397
Sets the layers &quot;layer&quot;(sp)(sp)transparency to trans.
1398
May raise NotFoundError if the layer can&apos;t be found.
1399
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1400
    </message>
1401
    <message>
1402
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
1403
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool
1404
 
1405
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
1406
that the layer &quot;layer&quot; is visible, a value of False means that the layer
1407
&quot;layer&quot; is invisible.
1408
 
1409
May raise NotFoundError if the layer can&apos;t be found.
1410
May raise ValueError if the layer name isn&apos;t acceptable.
1411
</source>
12612 cbradney 1412
        <translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool
12590 cbradney 1413
 
1414
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
1415
that the layer &quot;layer&quot; is visible, a value of False means that the layer
1416
&quot;layer&quot; is invisible.
1417
 
1418
May raise NotFoundError if the layer can&apos;t be found.
1419
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1420
    </message>
1421
    <message>
1422
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
1423
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
1424
 
1425
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
1426
that the layer &quot;layer&quot; can be printed, a value of False means that printing
1427
the layer &quot;layer&quot; is disabled.
1428
 
1429
May raise NotFoundError if the layer can&apos;t be found.
1430
May raise ValueError if the layer name isn&apos;t acceptable.
1431
</source>
12612 cbradney 1432
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
12590 cbradney 1433
 
1434
Gibt zurück, ob die Ebene gedruckt wird oder nicht. True bedeutet, dass die Ebene
1435
gedruckt wird, False bedeutet, dass das Drucken deaktiviert ist.
1436
 
1437
Der Fehler NotFoundError tritt auf, wenn die Ebene nicht existiert.
1438
Der Fehler ValueError tritt auf, wenn der Ebenenname ungültig ist.</translation>
1439
    </message>
1440
    <message>
1441
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
1442
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool
1443
 
1444
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
1445
that the layer &quot;layer&quot; is editable, a value of False means that the layer
1446
&quot;layer&quot; is locked.
1447
 
1448
May raise NotFoundError if the layer can&apos;t be found.
1449
May raise ValueError if the layer name isn&apos;t acceptable.
1450
</source>
12612 cbradney 1451
        <translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool
12590 cbradney 1452
 
1453
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
1454
that the layer &quot;layer&quot; is editable, a value of False means that the layer
1455
&quot;layer&quot; is locked.
1456
 
1457
May raise NotFoundError if the layer can&apos;t be found.
1458
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1459
    </message>
1460
    <message>
1461
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
1462
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
1463
 
1464
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
1465
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
1466
&quot;layer&quot; is normal.
1467
 
1468
May raise NotFoundError if the layer can&apos;t be found.
1469
May raise ValueError if the layer name isn&apos;t acceptable.
1470
</source>
12612 cbradney 1471
        <translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool
12590 cbradney 1472
 
1473
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
1474
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
1475
&quot;layer&quot; is normal.
1476
 
1477
May raise NotFoundError if the layer can&apos;t be found.
1478
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1479
    </message>
1480
    <message>
1481
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
1482
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool
1483
 
1484
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
1485
that text flows around, a value of False means that the text does not flow around.
1486
 
1487
May raise NotFoundError if the layer can&apos;t be found.
1488
May raise ValueError if the layer name isn&apos;t acceptable.
1489
</source>
12612 cbradney 1490
        <translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool
12590 cbradney 1491
 
1492
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
1493
that text flows around, a value of False means that the text does not flow around.
1494
 
1495
May raise NotFoundError if the layer can&apos;t be found.
1496
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1497
    </message>
1498
    <message>
1499
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
1500
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
1501
 
1502
Returns the &quot;layer&quot; layer blendmode,
1503
 
1504
May raise NotFoundError if the layer can&apos;t be found.
1505
May raise ValueError if the layer name isn&apos;t acceptable.
1506
</source>
12612 cbradney 1507
        <translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int
12590 cbradney 1508
 
1509
Returns the &quot;layer&quot; layer blendmode,
1510
 
1511
May raise NotFoundError if the layer can&apos;t be found.
1512
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1513
    </message>
1514
    <message>
1515
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
1516
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float
1517
 
1518
Returns the &quot;layer&quot; layer transparency,
1519
 
1520
May raise NotFoundError if the layer can&apos;t be found.
1521
May raise ValueError if the layer name isn&apos;t acceptable.
1522
</source>
12612 cbradney 1523
        <translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float
12590 cbradney 1524
 
1525
Returns the &quot;layer&quot; layer transparency,
1526
 
1527
May raise NotFoundError if the layer can&apos;t be found.
1528
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
1529
    </message>
1530
    <message>
1531
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
1532
        <source>deleteLayer(&quot;layer&quot;)
1533
 
1534
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
1535
exists or if it&apos;s the only layer in the document.
1536
 
1537
May raise NotFoundError if the layer can&apos;t be found.
1538
May raise ValueError if the layer name isn&apos;t acceptable.
1539
</source>
12612 cbradney 1540
        <translation type="obsolete">deleteLayer(&quot;layer&quot;)
12590 cbradney 1541
 
1542
Löscht die Ebene &quot;layer&quot;. Ist die Ebene nicht vorhanden oder ist nur eine
1543
Ebene vorhanden, passiert gar nichts.
1544
 
1545
Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf,
1546
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
1547
    </message>
1548
    <message>
1549
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
1550
        <source>createLayer(layer)
1551
 
1552
Creates a new layer with the name &quot;name&quot;.
1553
 
1554
May raise ValueError if the layer name isn&apos;t acceptable.
1555
</source>
12612 cbradney 1556
        <translation type="obsolete">createLayer(layer)
12590 cbradney 1557
 
1558
Erzeugt einen Ebene mit dem Namen &quot;layer&quot;.
1559
 
1560
Ist der Name ungültig, tritt der Fehler ValueError auf.</translation>
1561
    </message>
1562
    <message>
1563
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
1564
        <source>getGuiLanguage() -&gt; string
1565
 
1566
Returns a string with the -lang value.
1567
</source>
12612 cbradney 1568
        <translation type="obsolete">getGuiLanguage() -&gt; string
12590 cbradney 1569
 
1570
Gibt den Wert der Variable -lang zurück.</translation>
1571
    </message>
1572
    <message>
1573
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
1574
        <source>moveSelectionToFront()
1575
 
1576
Moves current selection to front.
1577
</source>
12612 cbradney 1578
        <translation type="obsolete">moveSelectionToFront()
12590 cbradney 1579
Moves current selection to front.</translation>
1580
    </message>
1581
    <message>
1582
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
1583
        <source>moveSelectionToFront()
1584
 
1585
Moves current selection to back.
1586
</source>
12612 cbradney 1587
        <translation type="obsolete">moveSelectionToFront()
12590 cbradney 1588
Moves current selection to back.</translation>
1589
    </message>
1590
    <message>
1591
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
1592
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
1593
 
1594
Creates a new rectangle on the current page and returns its name. The
1595
coordinates are given in the current measurement units of the document
1596
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
1597
because you need this name to reference that object in future. If &quot;name&quot;
1598
is not given Scribus will create one for you.
1599
 
1600
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1601
</source>
12612 cbradney 1602
        <translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
12590 cbradney 1603
 
1604
Erzeugt ein neues Rechteck auf der aktuellen Seite und gibt seinen Namen zurück. Die
1605
Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe UNIT-Konstanten).
1606
&quot;name&quot; sollte eine eindeutige Identifikation des Rechtecks ermöglichen, weil Sie den Objekt-
1607
namen immer wieder benötigen. Ist &quot;name&quot; nicht vorhanden, wählt Scribus einen Namen für Sie.
1608
 
1609
Wenn Sie einen schon verwendeten Namen benutzen, tritt der Fehler NameExistsError auf.</translation>
1610
    </message>
1611
    <message>
1612
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
1613
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
1614
 
1615
Creates a new ellipse on the current page and returns its name.
1616
The coordinates are given in the current measurement units of the document
1617
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
1618
because you need this name for further referencing of that object. If &quot;name&quot;
1619
is not given Scribus will create one for you.
1620
 
1621
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1622
</source>
12612 cbradney 1623
        <translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
12590 cbradney 1624
 
1625
Erzeugt eine Ellipse auf der aktuellen Seite und gibt ihren Namen zurück. Die Koordinaten
1626
werden in der Maßeinheit des Dokuments angegeben (siehe UNIT-Konstanten). &quot;name&quot; sollte
1627
das Objekt eindeutig identifizieren, weil Sie den Namen für spätere Zwecke brauchen. Ist &quot;name&quot;
1628
nicht angegeben, erzeugt Scribus einen Namen für das Objekt.
1629
 
1630
Ist der Name schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
1631
    </message>
1632
    <message>
1633
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
1634
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
1635
 
1636
Creates a new picture frame on the current page and returns its name. The
1637
coordinates are given in the current measurement units of the document.
1638
&quot;name&quot; should be a unique identifier for the object because you need this
1639
name for further access to that object. If &quot;name&quot; is not given Scribus will
1640
create one for you.
1641
 
1642
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1643
</source>
12612 cbradney 1644
        <translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
12590 cbradney 1645
 
1646
Erzeugt einen Bildrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
1647
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1648
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1649
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1650
einen Namen für das Objekt fest.
1651
 
1652
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
1653
    </message>
1654
    <message>
1655
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
1656
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
1657
 
1658
Creates a new text frame on the actual page and returns its name.
1659
The coordinates are given in the actual measurement unit of the document (see
1660
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
1661
you need this name for further referencing of that object. If &quot;name&quot; is not
1662
given Scribus will create one for you.
1663
 
1664
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1665
</source>
12612 cbradney 1666
        <translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
12590 cbradney 1667
 
1668
Erzeugt einen neuen Textrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
1669
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1670
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1671
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1672
einen Namen für das Objekt fest.
1673
 
1674
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
1675
    </message>
1676
    <message>
1677
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
1678
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
1679
 
1680
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
1681
its name. The coordinates are given in the current measurement unit of the
1682
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
1683
object because you need this name for further access to that object. If
1684
&quot;name&quot; is not given Scribus will create one for you.
1685
 
1686
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1687
</source>
12612 cbradney 1688
        <translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
12590 cbradney 1689
 
1690
Erzeugt eine Linie von P(x1,y1) zu P(x2,y2) und gibt ihren Namen zurück.
1691
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1692
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1693
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1694
einen Namen für das Objekt fest.
1695
 
1696
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
1697
    </message>
1698
    <message>
1699
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
1700
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
1701
 
1702
Creates a new polyline and returns its name. The points for the polyline are
1703
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
1704
The coordinates are given in the current measurement units of the document (see
1705
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
1706
you need this name for further access to that object. If &quot;name&quot; is not given
1707
Scribus will create one for you.
1708
 
1709
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1710
May raise ValueError if an insufficient number of points is passed or if
1711
the number of values passed don&apos;t group into points without leftovers.
1712
</source>
12612 cbradney 1713
        <translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
12590 cbradney 1714
 
1715
Erzeugt eine Mehrfachlinie und und gibt ihren Namen zurück. Die Punkte werden in
1716
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn].
1717
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1718
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1719
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1720
einen Namen für das Objekt fest.
1721
 
1722
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
1723
Ist die Anzahl der Punkte nicht genügend, tritt der Fehler ValueError auf.</translation>
1724
    </message>
1725
    <message>
1726
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
1727
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string
1728
 
1729
Creates a new polygon and returns its name. The points for the polygon are
1730
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
1731
At least three points are required. There is no need to repeat the first point
1732
to close the polygon. The polygon is automatically closed by connecting the
1733
first and the last point.  The coordinates are given in the current measurement
1734
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
1735
identifier for the object because you need this name for further access to that
1736
object. If &quot;name&quot; is not given Scribus will create one for you.
1737
 
1738
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1739
May raise ValueError if an insufficient number of points is passed or if
1740
the number of values passed don&apos;t group into points without leftovers.
1741
</source>
12612 cbradney 1742
        <translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
12590 cbradney 1743
 
1744
Erzeugt ein Vieleck und gibt seinen Namen zurück. Die Punkte werden in
1745
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn]. Sie müssen
1746
mindestens 3 Punkte angeben, aber Sie müssen den ersten Punkt nicht zum
1747
Schließen des Polygons erneut angeben - das geschieht automatisch.
1748
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1749
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1750
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1751
einen Namen für das Objekt fest.
1752
 
1753
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
1754
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
1755
    </message>
1756
    <message>
1757
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
1758
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
1759
 
1760
Creates a new bezier curve and returns its name. The points for the bezier
1761
curve are stored in the list &quot;list&quot; in the following order:
1762
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
1763
In the points list, x and y mean the x and y coordinates of the point and kx
1764
and ky meaning the control point for the curve.  The coordinates are given in
1765
the current measurement units of the document (see UNIT constants). &quot;name&quot;
1766
should be a unique identifier for the object because you need this name for
1767
further access to that object. If &quot;name&quot; is not given Scribus will create one
1768
for you.
1769
 
1770
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1771
May raise ValueError if an insufficient number of points is passed or if
1772
the number of values passed don&apos;t group into points without leftovers.
1773
</source>
12612 cbradney 1774
        <translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
12590 cbradney 1775
 
1776
Erzeugt eine Bézierkurve und gibt ihren Namen zurück. Die Punkte werden in
1777
der folgenden Reihenfolge gespeichert:
1778
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn].
1779
x und y steht dabei für die X- und Y-Koordinaten und kx und ky steht für den
1780
Kontrollpunkt der Kurve.
1781
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1782
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1783
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1784
einen Namen für das Objekt fest.
1785
 
1786
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
1787
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
1788
    </message>
1789
    <message>
1790
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
1791
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
1792
 
1793
Creates a new pathText by merging the two objects &quot;textbox&quot; and
1794
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
1795
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
1796
unique identifier for the object because you need this name for further access
1797
to that object. If &quot;name&quot; is not given Scribus will create one for you.
1798
 
1799
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
1800
May raise NotFoundError if one or both of the named base object don&apos;t exist.
1801
</source>
12612 cbradney 1802
        <translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
12590 cbradney 1803
 
1804
Erzeugt Text auf einem Pfad, indem die Objekte &quot;textbox&quot; und &quot;beziercurve&quot;
1805
zusammengefügt werden.
1806
Die Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe
1807
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
1808
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
1809
einen Namen für das Objekt fest.
1810
 
1811
Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
1812
Sind ein oder beide Objekte nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
1813
    </message>
1814
    <message>
1815
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
1816
        <source>deleteObject([&quot;name&quot;])
1817
 
1818
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
1819
selected item is deleted.
1820
</source>
12612 cbradney 1821
        <translation type="obsolete">deleteObject([&quot;name&quot;])
12590 cbradney 1822
 
1823
Löscht das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
1824
Objekt gelöscht.</translation>
1825
    </message>
1826
    <message>
1827
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
1828
        <source>textFlowMode(&quot;name&quot; [, state])
1829
 
1830
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
1831
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
1832
Setting &quot;state&quot; to 0 will disable text flow.
1833
Setting &quot;state&quot; to 1 will make text flow around object frame.
1834
Setting &quot;state&quot; to 2 will make text flow around bounding box.
1835
Setting &quot;state&quot; to 3 will make text flow around contour line.
1836
If &quot;state&quot; is not passed, text flow is toggled.
1837
</source>
12612 cbradney 1838
        <translation type="obsolete">textFlowMode(&quot;name&quot; [, state])
12590 cbradney 1839
 
1840
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
1841
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).(new line)
1842
Setting &quot;state&quot; to 0 will disable text flow.
1843
Setting &quot;state&quot; to 1 will make text flow around object frame.
1844
Setting &quot;state&quot; to 2 will make text flow around bounding box.
1845
Setting &quot;state&quot; to 3 will make text flow around contour line.
1846
If &quot;state&quot; is not passed, text flow is toggled.</translation>
1847
    </message>
1848
    <message>
1849
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
1850
        <source>objectExists([&quot;name&quot;]) -&gt; bool
1851
 
1852
Test if an object with specified name really exists in the document.
1853
The optional parameter is the object name. When no object name is given,
1854
returns True if there is something selected.
1855
</source>
12612 cbradney 1856
        <translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
12590 cbradney 1857
 
1858
Gibt an, ob das Objekt mit dem Name &quot;name&quot; auch wirklich im aktuellen Dokument
1859
existiert. &quot;name&quot; ist optional, ist &quot;name&quot; nicht angegeben, wird True ausgegeben, wenn
1860
gerade ein Objekt selektiert ist.</translation>
1861
    </message>
1862
    <message>
1863
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
1864
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])
1865
 
1866
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
1867
given, it&apos;s applied on the selected object.
1868
</source>
12612 cbradney 1869
        <translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
12590 cbradney 1870
 
1871
Setzt den Absatzstil &quot;style&quot; für das Objekt &quot;name&quot;. Ist kein Objekt angegeben,
1872
wird der Stil auf das aktuelle Objekt angewendet.</translation>
1873
    </message>
1874
    <message>
1875
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
1876
        <source>getAllStyles() -&gt; list
1877
 
1878
Return a list of the names of all paragraph styles in the current document.
1879
</source>
12612 cbradney 1880
        <translation type="obsolete">getAllStyles() -&gt; list
12590 cbradney 1881
 
1882
Gibt eine Listen mit allen Absatzstilen im aktuellen Dokument zurück.</translation>
1883
    </message>
1884
    <message>
1885
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
1886
        <source>duplicateObject([&quot;name&quot;]) -&gt; string
1887
 
1888
creates a Duplicate of the selected Object (or Selection Group).
1889
</source>
12612 cbradney 1890
        <translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string
12590 cbradney 1891
 
1892
creates a Duplicate of the selected Object (or Selection Group).</translation>
1893
    </message>
1894
    <message>
1895
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="265"/>
1896
        <source>converTo(type,[&quot;name&quot;]) -&gt; None
1897
 
1898
converts the item to a different type (as declared in pageitem.h).
1899
</source>
12612 cbradney 1900
        <translation type="obsolete">converTo(type,[&quot;name&quot;]) -&gt; Noneconverts the item to a different type (as declared in pageitem.h).</translation>
12590 cbradney 1901
    </message>
1902
    <message>
1903
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="278"/>
1904
        <source>getFileName() -&gt; string
1905
 
1906
Returns the document&apos;s filename.
1907
</source>
12612 cbradney 1908
        <translation type="obsolete">getFileName() -&gt; stringReturns the document&apos;s filename.</translation>
12590 cbradney 1909
    </message>
1910
    <message>
1911
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
1912
        <source>newPage(where [,&quot;masterpage&quot;])
1913
 
1914
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
1915
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
1916
counted from 1 upwards, no matter what the displayed first page number of your
1917
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
1918
master page for the new page.
1919
 
1920
May raise IndexError if the page number is out of range
1921
</source>
12612 cbradney 1922
        <translation type="obsolete">newPage(where [,&quot;masterpage&quot;])
12590 cbradney 1923
 
1924
Erzeugt eine neue Seite. Falls &quot;where&quot; -1 ist, wird die neue Seite an das Dokument angefügt,
1925
ansonsten wird die neue Seite vor &quot;where&quot; eingefügt. Seitennummern werden von 1 ab hoch-
1926
gezählt, egal welches die angezeigte erste Seitennummer Ihres Dokumentes ist. Der optionale
1927
Parameter &quot;masterpage&quot; legt den Namen der Musterseite für die neue Seite fest</translation>
1928
    </message>
1929
    <message>
1930
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
1931
        <source>currentPage() -&gt; integer
1932
 
1933
Returns the number of the current working page. Page numbers are counted from 1
1934
upwards, no matter what the displayed first page number of your document is.
1935
</source>
12612 cbradney 1936
        <translation type="obsolete">currentPage() -&gt; integer
12590 cbradney 1937
 
1938
Gibt die Nummer der aktuellen Seite zurück. Seitenzahlen werden ab 1 gezählt, egal welche
1939
Seitenzahl auf der aktuellen Seite angezeigt wird.</translation>
1940
    </message>
1941
    <message>
1942
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
1943
        <source>redrawAll()
1944
 
1945
Redraws all pages.
1946
</source>
12612 cbradney 1947
        <translation type="obsolete">redrawAll()
12590 cbradney 1948
 
1949
Baut alle Seiten neu auf.</translation>
1950
    </message>
1951
    <message>
1952
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
1953
        <source>getPageType() -&gt; integer
1954
 
1955
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
1956
</source>
12612 cbradney 1957
        <translation type="obsolete">getPageType() -&gt; integerReturns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page</translation>
12590 cbradney 1958
    </message>
1959
    <message>
1960
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
1961
        <source>savePageAsEPS(&quot;name&quot;)
1962
 
1963
Saves the current page as an EPS to the file &quot;name&quot;.
1964
 
1965
May raise ScribusError if the save failed.
1966
</source>
12612 cbradney 1967
        <translation type="obsolete">savePageAsEPS(&quot;name&quot;)
12590 cbradney 1968
 
1969
Speichert die aktuelle Seite als EPS-Datei mit dem Namen &quot;name&quot;.
1970
 
1971
Schlägt das Speichern fehl, tritt der Fehler ScribusError auf.</translation>
1972
    </message>
1973
    <message>
1974
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
1975
        <source>deletePage(nr)
1976
 
1977
Deletes the given page. Does nothing if the document contains only one page.
1978
Page numbers are counted from 1 upwards, no matter what the displayed first
1979
page number is.
1980
 
1981
May raise IndexError if the page number is out of range
1982
</source>
12612 cbradney 1983
        <translation type="obsolete">deletePage(nr)
12590 cbradney 1984
 
1985
Löscht die Seite mit der Nummer &quot;nr&quot;. Besteht das Dokument nur aus einer Seite, passiert nichts.
1986
Seitenzahlen werden von 1 aufwärts gezählt, egal, welche Seitenzahl Sie auf der aktuellen Seite
1987
im Dokument sehen.
1988
 
1989
Ist die Seitenzahl ungültig, tritt der Fehler IndexError auf</translation>
1990
    </message>
1991
    <message>
1992
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
1993
        <source>gotoPage(nr)
1994
 
1995
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
1996
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
1997
just sets the page that script commands will operates on.
1998
 
1999
May raise IndexError if the page number is out of range.
2000
</source>
12612 cbradney 2001
        <translation type="obsolete">gotoPage(nr)Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note thatgotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, itjust sets the page that script commands will operates on.May raise IndexError if the page number is out of range.</translation>
12590 cbradney 2002
    </message>
2003
    <message>
2004
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
2005
        <source>pageCount() -&gt; integer
2006
 
2007
Returns the number of pages in the document.
2008
</source>
12612 cbradney 2009
        <translation type="obsolete">pageCount() -&gt; integer
12590 cbradney 2010
 
2011
Gibt die Anzahl der Seiten im Dokument zurück.</translation>
2012
    </message>
2013
    <message>
2014
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
2015
        <source>getHGuides() -&gt; list
2016
 
2017
Returns a list containing positions of the horizontal guides. Values are in the
2018
document&apos;s current units - see UNIT_&lt;type&gt; constants.
2019
</source>
12612 cbradney 2020
        <translation type="obsolete">getHGuides() -&gt; list
12590 cbradney 2021
 
2022
Gibt eine Liste zurück, die die Position der horizontalen Hilfslinien enthält. Die Werte
2023
werden in der Maßeinheit des Dokuments angegeben, siehe UNIT-Konstanten.</translation>
2024
    </message>
2025
    <message>
2026
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
2027
        <source>setHGuides(list)
2028
 
2029
Sets horizontal guides. Input parameter must be a list of guide positions
2030
measured in the current document units - see UNIT_&lt;type&gt; constants.
2031
 
2032
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
2033
         setHGuides([90,250]) # replace current guides entirely
2034
</source>
12612 cbradney 2035
        <translation type="obsolete">setHGuides(list)
12590 cbradney 2036
 
2037
Legt horizontale Hilfslinien fest, list muss eine Liste der Linien sein, angegeben in der Maßeinheit
2038
des Dokuments, siehe UNIT-Konstanten.
2039
 
2040
Beispiel:
2041
setHGuides(getHGuides() + [200.0, 210.0] # fügt eine neue Hilfslinie hinzu
2042
</translation>
2043
    </message>
2044
    <message>
2045
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
2046
        <source>getVGuides()
2047
 
2048
See getHGuides.
2049
</source>
12612 cbradney 2050
        <translation type="obsolete">getVGuides()
12590 cbradney 2051
 
2052
Siehe getHGuides.</translation>
2053
    </message>
2054
    <message>
2055
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
2056
        <source>setVGuides()
2057
 
2058
See setHGuides.
2059
</source>
12612 cbradney 2060
        <translation type="obsolete">setVGuides()
12590 cbradney 2061
 
2062
Siehe setHGuides.</translation>
2063
    </message>
2064
    <message>
2065
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
2066
        <source>getPageSize() -&gt; tuple
2067
 
2068
Returns a tuple with page dimensions measured in the document&apos;s current units.
2069
See UNIT_&lt;type&gt; constants and getPageMargins()
2070
</source>
12612 cbradney 2071
        <translation type="obsolete">getPageSize() -&gt; tuple
12590 cbradney 2072
 
2073
Gibt eine Liste mit der Seitengröße in der aktuellen Maßeinheit zurück, siehe
2074
UNIT-Konstanten und getPageMargins()</translation>
2075
    </message>
2076
    <message>
2077
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
2078
        <source>getPageItems() -&gt; list
2079
 
2080
Returns a list of tuples with items on the current page. The tuple is:
2081
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
2082
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
2083
the page...
2084
</source>
12612 cbradney 2085
        <translation type="obsolete">getPageItems() -&gt; list
12590 cbradney 2086
 
2087
Gibt eine Liste zurück mit den Objekten auf der aktuelle Seite. Die Reihenfolge
2088
der Werte ist: (Name, Typ des Objekts, Anordnung).
2089
 
2090
Beispiel: [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)] bedeutet, dass das Objekt Text1 heißt,
2091
ein Textrahmen ist  (type 4) und sich auf der ersten Seite befindet...</translation>
2092
    </message>
2093
    <message>
2094
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
2095
        <source>getPageMargins()
2096
 
2097
Returns the page margins as a (top, left, right, bottom) tuple in the current
2098
units. See UNIT_&lt;type&gt; constants and getPageSize().
2099
</source>
12612 cbradney 2100
        <translation type="obsolete">getPageMargins()
12590 cbradney 2101
 
2102
Gibt die Seitenränder als ein Tupel in der gerade aktiven Einheit zurück (oben, unten, links, rechts).
2103
Mögliche Einheiten finden Sie bei UNIT_&lt;tye&gt; und getPageSize().
2104
</translation>
2105
    </message>
2106
    <message>
2107
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
2108
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
2109
 
2110
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
2111
fromDoc: string; the filename of the document to import pages from
2112
pageList: tuple with page numbers of pages to import
2113
create: number; 0 to replace existing pages, 1 (default) to insert new pages
2114
importWhere: number; the page number (of the current document) at which import the pages
2115
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
2116
</source>
12612 cbradney 2117
        <translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
12590 cbradney 2118
 
2119
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
2120
fromDoc: string; the filename of the document to import pages from
2121
pageList: tuple with page numbers of pages to import
2122
create: number; 0 to replace existing pages, 1 (default) to insert new pages
2123
importWhere: number; the page number (of the current document) at which import the pages
2124
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
2125
    </message>
2126
    <message>
2127
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
2128
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
2129
 
2130
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
2131
the same as for setFillColor() and setFillShade(). See the constants for
2132
available types (FILL_&lt;type&gt;).
2133
</source>
12612 cbradney 2134
        <translation type="obsolete">setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
12590 cbradney 2135
 
2136
Füllt das Objekt &quot;name&quot; mit einem Farbverlauf. Farbbezeichnungen sind die
2137
gleichen wie für setFillColor() und setFillShade(). Siehe Konstanten
2138
für mögliche Typen (FILL_&lt;type&gt;).</translation>
2139
    </message>
2140
    <message>
2141
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
2142
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
2143
 
2144
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
2145
is the name of one of the defined colors. If &quot;name&quot; is not given the
2146
currently selected item is used.
2147
</source>
12612 cbradney 2148
        <translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
12590 cbradney 2149
 
2150
Setzt die Füllfarbe &quot;color&quot; für das Objekt &quot;name&quot;. &quot;color&quot; ist der Name einer
2151
vorhandenen Farbe. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
2152
verwendet.</translation>
2153
    </message>
2154
    <message>
2155
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
2156
        <source>setFillTransparency(transparency, [&quot;name&quot;])
2157
 
2158
Sets the fill transparency of the object &quot;name&quot; to transparency
2159
If &quot;name&quot; is not given the currently selected item is used.
2160
</source>
12612 cbradney 2161
        <translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
12590 cbradney 2162
Sets the fill transparency of the object &quot;name&quot; to transparency
2163
If &quot;name&quot; is not given the currently selected item is used.</translation>
2164
    </message>
2165
    <message>
2166
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
2167
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])
2168
 
2169
Sets the fill blendmode of the object &quot;name&quot; to blendmode
2170
If &quot;name&quot; is not given the currently selected item is used.
2171
</source>
12612 cbradney 2172
        <translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
12590 cbradney 2173
Sets the fill blendmode of the object &quot;name&quot; to blendmode
2174
If &quot;name&quot; is not given the currently selected item is used.</translation>
2175
    </message>
2176
    <message>
2177
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
2178
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
2179
 
2180
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
2181
is not given the currently selected item is used.
2182
</source>
12612 cbradney 2183
        <translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
12590 cbradney 2184
 
2185
Setzt die Linienfarbe &quot;color&quot; für das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben,
2186
wird das aktuelle Objekt verwendet.</translation>
2187
    </message>
2188
    <message>
2189
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
2190
        <source>setLineTransparency(transparency, [&quot;name&quot;])
2191
 
2192
Sets the line transparency of the object &quot;name&quot; to transparency
2193
If &quot;name&quot; is not given the currently selected item is used.
2194
</source>
12612 cbradney 2195
        <translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
12590 cbradney 2196
Sets the line transparency of the object &quot;name&quot; to transparency
2197
If &quot;name&quot; is not given the currently selected item is used.</translation>
2198
    </message>
2199
    <message>
2200
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
2201
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])
2202
 
2203
Sets the line blendmode of the object &quot;name&quot; to blendmode
2204
If &quot;name&quot; is not given the currently selected item is used.
2205
</source>
12612 cbradney 2206
        <translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
12590 cbradney 2207
Sets the line blendmode of the object &quot;name&quot; to blendmode
2208
If &quot;name&quot; is not given the currently selected item is used.</translation>
2209
    </message>
2210
    <message>
2211
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
2212
        <source>setLineWidth(width, [&quot;name&quot;])
2213
 
2214
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
2215
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
2216
given the currently selected item is used.
2217
 
2218
May raise ValueError if the line width is out of bounds.
2219
</source>
12612 cbradney 2220
        <translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
12590 cbradney 2221
 
2222
Setzt die Linienbreite für das Objekt &quot;name&quot; auf &quot;width&quot;. &quot;width&quot; muss zwischen
2223
0.0 und 12.0 groß sein und wird in Punkt angegeben. Ist &quot;name&quot; nicht angegeben,
2224
wird das aktuelle Objekt verwendet.
2225
 
2226
Ist die Linienbreite ungültig, tritt der Fehler ValueError auf.</translation>
2227
    </message>
2228
    <message>
2229
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
2230
        <source>setLineShade(shade, [&quot;name&quot;])
2231
 
2232
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
2233
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2234
(full color intensity). If &quot;name&quot; is not given the currently selected item
2235
is used.
2236
 
2237
May raise ValueError if the line shade is out of bounds.
2238
</source>
12612 cbradney 2239
        <translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
12590 cbradney 2240
 
2241
Setzt den Tonwert der Linie des Objekts &quot;name&quot; auf &quot;shade&quot;. &quot;shade&quot; ist eine
2242
ganze Zahl zwischen 0 und 100. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
2243
Objekt verwendet.
2244
 
2245
Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
2246
    </message>
2247
    <message>
2248
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
2249
        <source>setLineJoin(join, [&quot;name&quot;])
2250
 
2251
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
2252
If &quot;name&quot; is not given the currently selected item is used. There are
2253
predefined constants for join - JOIN_&lt;type&gt;.
2254
</source>
12612 cbradney 2255
        <translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
12590 cbradney 2256
 
2257
Setzt die Ecken der Linien des Objekts &quot;name&quot; auf den Stil join.
2258
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Obekt verwendet.
2259
Benutzen Sie die vorgegeben Konstaten des Typs JOIN_*.</translation>
2260
    </message>
2261
    <message>
2262
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
2263
        <source>setLineEnd(endtype, [&quot;name&quot;])
2264
 
2265
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
2266
If &quot;name&quot; is not given the currently selected item is used. There are
2267
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
2268
</source>
12612 cbradney 2269
        <translation type="obsolete">SetLineEnd(endtype, [&quot;name&quot;])
12590 cbradney 2270
 
2271
Setzt die Linienenden des Objekts &quot;name&quot; auf den Stil &quot;endtype&quot;.
2272
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
2273
Benutzen Sie die vorgegebenen Konstanten des Typs CAP_*.</translation>
2274
    </message>
2275
    <message>
2276
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
2277
        <source>setLineStyle(style, [&quot;name&quot;])
2278
 
2279
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
2280
is not given the currently selected item is used. There are predefined
2281
constants for &quot;style&quot; - LINE_&lt;style&gt;.
2282
</source>
12612 cbradney 2283
        <translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
12590 cbradney 2284
 
2285
Setzt den Linienstil des Objekts &quot;name&quot; auf den Stil &quot;style&quot;. Ist &quot;name&quot; nicht
2286
angegeben, wird das aktuelle Objekt verwendet. Benutzen Sie die
2287
vorgegebenen Konstanten des Typs LINE_*.</translation>
2288
    </message>
2289
    <message>
2290
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
2291
        <source>setFillShade(shade, [&quot;name&quot;])
2292
 
2293
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
2294
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2295
(full Color intensity). If &quot;name&quot; is not given the currently selected
2296
Item is used.
2297
 
2298
May raise ValueError if the fill shade is out of bounds.
2299
</source>
12612 cbradney 2300
        <translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
12590 cbradney 2301
 
2302
Setzt den Tonwert der Füllfarbe für das Objekt &quot;name&quot; auf &quot;shade&quot;.
2303
&quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein. Ist &quot;name&quot;
2304
nicht angegeben, wird das aktuelle Objekt benutzt.
2305
 
2306
Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
2307
    </message>
2308
    <message>
2309
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
2310
        <source>setCornerRadius(radius, [&quot;name&quot;])
2311
 
2312
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
2313
in points. If &quot;name&quot; is not given the currently selected item is used.
2314
 
2315
May raise ValueError if the corner radius is negative.
2316
</source>
12612 cbradney 2317
        <translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
12590 cbradney 2318
 
2319
Setzt den Eckradius für das Objekt &quot;name&quot; auf radius. Der Radius wird
2320
in Punkt angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
2321
Objekt verwendet.
2322
 
2323
Ist der Eckradius negativ, tritt der Fehler ValueError auf.</translation>
2324
    </message>
2325
    <message>
2326
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
2327
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
2328
 
2329
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
2330
If &quot;name&quot; is not given the currently selected item is used.
2331
 
2332
May raise NotFoundError if the line style doesn&apos;t exist.
2333
</source>
12612 cbradney 2334
        <translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
12590 cbradney 2335
 
2336
Setzt den Linienstil für das Objekt &quot;name&quot; auf den angegebenen Stil.
2337
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Stil benutzt.
2338
 
2339
Ist der Stil nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
2340
    </message>
2341
    <message>
2342
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
2343
        <source>createParagraphStyle(...)
2344
 
2345
Creates a paragraph style. This function takes the following keyword parameters:
2346
 
2347
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
2348
 
2349
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
2350
 
2351
fixed linespacing:          0
2352
 
2353
automatic linespacing:      1
2354
 
2355
baseline grid linespacing:  2
2356
 
2357
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
2358
 
2359
alignment [optional] -&gt; specifies the alignment of the paragraph
2360
 
2361
-&gt; left:     0
2362
 
2363
-&gt; center:   1
2364
 
2365
-&gt; right:    2
2366
 
2367
-&gt; justify:  3
2368
 
2369
-&gt; extend:   4
2370
 
2371
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
2372
 
2373
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
2374
 
2375
firstindent [optional] -&gt; the indent of the first line
2376
 
2377
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
2378
 
2379
dropcaplines [optional] -&gt; height (in lines) of the caps if used
2380
 
2381
dropcapoffset [optional] -&gt; offset of the caps if used
2382
 
2383
&quot;charstyle&quot; [optional] -&gt; char style to use
2384
 
2385
</source>
12612 cbradney 2386
        <translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing:          0automatic linespacing:      1baseline grid linespacing:  2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left:     0-&gt; center:   1-&gt; right:    2-&gt; justify:  3-&gt; extend:   4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
12590 cbradney 2387
    </message>
2388
    <message>
2389
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
2390
        <source>createCharStyle(...)
2391
 
2392
Creates a character style. This function takes the following keyword parameters:
2393
 
2394
&quot;name&quot; [required] -&gt; name of the char style to create
2395
 
2396
&quot;font&quot; [optional] -&gt; name of the font to use
2397
 
2398
fontsize [optional] -&gt; font size to set (double)
2399
 
2400
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
2401
 
2402
-&gt; inherit
2403
 
2404
-&gt; bold
2405
 
2406
-&gt; italic
2407
 
2408
-&gt; underline
2409
 
2410
-&gt; underlinewords
2411
 
2412
-&gt; strike
2413
 
2414
-&gt; superscript
2415
 
2416
-&gt; subscript
2417
 
2418
-&gt; outline
2419
 
2420
-&gt; shadowed
2421
 
2422
-&gt; allcaps
2423
 
2424
-&gt; smallcaps
2425
 
2426
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
2427
 
2428
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
2429
 
2430
baselineoffset [optional] -&gt; offset of the baseline
2431
 
2432
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
2433
 
2434
outlinewidth [optional] -&gt; width of the outline if used
2435
 
2436
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
2437
 
2438
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
2439
 
2440
scaleh [optional], scalev [optional] -&gt; scale of the chars
2441
 
2442
tracking [optional] -&gt; tracking of the text
2443
 
2444
&quot;language&quot; [optional] -&gt; language code
2445
 
2446
</source>
12612 cbradney 2447
        <translation type="obsolete">createCharStyle(...)
12590 cbradney 2448
 
2449
Creates a character style. This function takes the following keyword parameters:
2450
 
2451
&quot;name&quot; [required] -&gt; name of the char style to create
2452
 
2453
&quot;font&quot; [optional] -&gt; name of the font to use
2454
 
2455
fontsize [optional] -&gt; font size to set (double)
2456
 
2457
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
2458
 
2459
-&gt; inherit
2460
 
2461
-&gt; bold
2462
 
2463
-&gt; italic
2464
 
2465
-&gt; underline
2466
 
2467
-&gt; underlinewords
2468
 
2469
-&gt; strike
2470
 
2471
-&gt; superscript
2472
 
2473
-&gt; subscript
2474
 
2475
-&gt; outline
2476
 
2477
 
2478
-&gt; shadowed
2479
 
2480
-&gt; allcaps
2481
 
2482
-&gt; smallcaps
2483
 
2484
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
2485
 
2486
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
2487
 
2488
baselineoffset [optional] -&gt; offset of the baseline
2489
 
2490
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
2491
 
2492
outlinewidth [optional] -&gt; width of the outline if used
2493
 
2494
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
2495
 
2496
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
2497
 
2498
scaleh [optional], scalev [optional] -&gt; scale of the chars
2499
 
2500
tracking [optional] -&gt; tracking of the text
2501
 
2502
&quot;language&quot; [optional] -&gt; language code</translation>
2503
    </message>
2504
    <message>
2505
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
2506
        <source>getFontSize([&quot;name&quot;]) -&gt; float
2507
 
2508
Returns the font size in points for the text frame &quot;name&quot;. If this text
2509
frame has some text selected the value assigned to the first character of
2510
the selection is returned.
2511
If &quot;name&quot; is not given the currently selected item is used.
2512
</source>
12612 cbradney 2513
        <translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float
12590 cbradney 2514
 
2515
Gibt die Schriftgröße in Punkten für den Textrahmen &quot;name&quot; zurück. Wenn innerhalb
2516
des Rahmens Text markiert ist, wird die Schriftgröße des ersten Zeichens verwendet.
2517
Wenn &quot;name&quot; nicht vergeben ist, wird der selektierte Textrahmen verwendet.</translation>
2518
    </message>
2519
    <message>
2520
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
2521
        <source>getFont([&quot;name&quot;]) -&gt; string
2522
 
2523
Returns the font name for the text frame &quot;name&quot;. If this text frame
2524
has some text selected the value assigned to the first character
2525
of the selection is returned. If &quot;name&quot; is not given the currently
2526
selected item is used.
2527
</source>
12612 cbradney 2528
        <translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
12590 cbradney 2529
 
2530
Gibt den Namen der Schrift für den Textrahmen &quot;name&quot; zurück. Ist in
2531
dem Textfeld Text ausgewählt, wird die Schrift des ersten gewählten
2532
Zeichens angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
2533
verwendet.</translation>
2534
    </message>
2535
    <message>
2536
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
2537
        <source>getTextLength([&quot;name&quot;]) -&gt; integer
2538
 
2539
Returns the length of the text in the text frame &quot;name&quot;.
2540
If &quot;name&quot; is not given the currently selected item is used.
2541
</source>
12612 cbradney 2542
        <translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
12590 cbradney 2543
 
2544
Gibt die Länge des Textes im Textrahmen &quot;name&quot; zurück.
2545
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
2546
    </message>
2547
    <message>
2548
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
2549
        <source>getTextLines([&quot;name&quot;]) -&gt; integer
2550
 
2551
Returns the number of lines of the text in the text frame &quot;name&quot;.
2552
If &quot;name&quot; is not given the currently selected item is used.
2553
</source>
12612 cbradney 2554
        <translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer
12590 cbradney 2555
 
2556
Returns the number of lines of the text in the text frame &quot;name&quot;.
2557
If &quot;name&quot; is not given the currently selected item is used.</translation>
2558
    </message>
2559
    <message>
2560
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
2561
        <source>getText([&quot;name&quot;]) -&gt; string
2562
 
2563
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
2564
selected, the selected text is returned. All text in the frame, not just
2565
currently visible text, is returned. If &quot;name&quot; is not given the currently
2566
selected item is used.
2567
</source>
12612 cbradney 2568
        <translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
12590 cbradney 2569
 
2570
Gibt den Text aus dem Textrahmen &quot;name&quot; zurück. Ist in dem Textfeld Text markiert,
2571
wird der selektierte Text zurückgegeben. Der gesamte Text wird zurückgegeben, nicht
2572
nur der sichtbare Teil des Textes, Ist &quot;name&quot; nicht angegeben, wird das aktuelle
2573
Objekt verwendet.</translation>
2574
    </message>
2575
    <message>
2576
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
2577
        <source>getAllText([&quot;name&quot;]) -&gt; string
2578
 
2579
Returns the text of the text frame &quot;name&quot; and of all text frames which are
2580
linked with this frame. If this textframe has some text selected, the selected
2581
text is returned. If &quot;name&quot; is not given the currently selected item is
2582
used.
2583
</source>
12612 cbradney 2584
        <translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
12590 cbradney 2585
 
2586
Gibt den Text aus dem Textrahmen &quot;name&quot; zurück und aus allen Rahmen, die mit
2587
dem Rahmen &quot;name&quot; verbunden sind. Ist in dem Textfeld Text markiert,
2588
wird der selektierte Text zurückgegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
2589
Objekt verwendet.</translation>
2590
    </message>
2591
    <message>
2592
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
2593
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float
2594
 
2595
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
2596
points. If &quot;name&quot; is not given the currently selected item is used.
2597
</source>
12612 cbradney 2598
        <translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
12590 cbradney 2599
 
2600
Gibt den Zeilenabstand für den Textrahmen &quot;name&quot; in Punkten zurück.
2601
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
2602
    </message>
2603
    <message>
2604
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
2605
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple
2606
 
2607
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
2608
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
2609
is not given the currently selected item is used.
2610
</source>
12612 cbradney 2611
        <translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
12590 cbradney 2612
    </message>
2613
    <message>
2614
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
2615
        <source>getColumnGap([&quot;name&quot;]) -&gt; float
2616
 
2617
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
2618
&quot;name&quot; is not given the currently selected item is used.
2619
</source>
12612 cbradney 2620
        <translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
12590 cbradney 2621
 
2622
Gibt den Zeilenabstand für den Text im Rahmen &quot;name&quot; in Punkten zurück. Ist
2623
&quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
2624
    </message>
2625
    <message>
2626
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
2627
        <source>getColumns([&quot;name&quot;]) -&gt; integer
2628
 
2629
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
2630
given the currently selected item is used.
2631
</source>
12612 cbradney 2632
        <translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
12590 cbradney 2633
 
2634
Gibt die Anzahl der Spalten im Textrahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
2635
angegeben, wird das aktuelle Objekt verwendet.</translation>
2636
    </message>
2637
    <message>
2638
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
2639
        <source>setText(&quot;text&quot;, [&quot;name&quot;])
2640
 
2641
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
2642
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
2643
for more details. If &quot;name&quot; is not given the currently selected item is
2644
used.
2645
</source>
12612 cbradney 2646
        <translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
12590 cbradney 2647
 
2648
Ändert den Text im Rahmen &quot;name&quot; auf den String &quot;text&quot;.
2649
Der Text muss URF8-kodiert sein - verwenden Sie z.B. unicode(text, &apos;iso-8859-2&apos;).
2650
Lesen Sie in der FAQ nach für weitere Informationen. Ist &quot;name&quot; nicht angegeben,
2651
wird der aktuelle Textrahmen verwendet.</translation>
2652
    </message>
2653
    <message>
2654
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
2655
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
2656
 
2657
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
2658
Text must be UTF encoded (see setText() as reference) The first character has an
2659
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
2660
not given the currently selected Item is used.
2661
 
2662
May throw IndexError for an insertion out of bounds.
2663
</source>
12612 cbradney 2664
        <translation type="obsolete">nsertText(&quot;text&quot;, pos, [&quot;name&quot;])
12590 cbradney 2665
 
2666
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
2667
Text must be UTF encoded (see setText() as reference) The first character has an
2668
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
2669
not given the currently selected Item is used.
2670
 
2671
May throw IndexError for an insertion out of bounds.</translation>
2672
    </message>
2673
    <message>
2674
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
2675
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])
2676
 
2677
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
2678
selected only the selected text is changed.  If &quot;name&quot; is not given the
2679
currently selected item is used.
2680
 
2681
May throw ValueError if the font cannot be found.
2682
</source>
12612 cbradney 2683
        <translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
12590 cbradney 2684
 
2685
Setzt die Schrift für den Rahmen &quot;name&quot; auf &quot;font&quot;. Ist Text ausgewählt,
2686
wird nur die Markierung verändert. Ist &quot;name&quot; nicht angegeben, wird der
2687
aktuelle Textrahmen verwendet.
2688
 
2689
Ist die Schrift ungültig, wird der Fehler ValueError ausgegeben.</translation>
2690
    </message>
2691
    <message>
2692
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
2693
        <source>setFontSize(size, [&quot;name&quot;])
2694
 
2695
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
2696
as a value in points. If there is some text selected only the selected text is
2697
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
2698
currently selected item is used.
2699
 
2700
May throw ValueError for a font size that&apos;s out of bounds.
2701
</source>
12612 cbradney 2702
        <translation type="obsolete">setFontSize(size, [&quot;name&quot;])
12590 cbradney 2703
 
2704
Setzt die Schriftgröße im Textrahmen &quot;name&quot; auf den Wert &quot;size&quot;. &quot;size&quot; ist
2705
ein Wert in Punkten zwischen 1 und 512. Ist eine Markierung vorhanden, wird
2706
nur die die Markiertung verändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
2707
Textrahmen verwendet.
2708
 
2709
Ist die Schriftgröße ungültig, wird der Fehler ValueError ausgegeben.</translation>
2710
    </message>
2711
    <message>
2712
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
2713
        <source>setLineSpacing(size, [&quot;name&quot;])
2714
 
2715
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
2716
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
2717
item is used.
2718
 
2719
May throw ValueError if the line spacing is out of bounds.
2720
</source>
12612 cbradney 2721
        <translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
12590 cbradney 2722
 
2723
Setzt den Zeilenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
2724
&quot;size&quot; ist ein Wert in Punkten. Ist &quot;name&quot; nicht angegeben, wird der
2725
aktuelle Textrahmen verwendet.
2726
 
2727
Ist der Wert für Zeilenabstand ungültig, wird der Fehler ValueError
2728
ausgegeben.</translation>
2729
    </message>
2730
    <message>
2731
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
2732
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
2733
 
2734
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
2735
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
2736
selected item is used.
2737
 
2738
May throw ValueError if any of the distances are out of bounds (must be positive).
2739
</source>
12612 cbradney 2740
        <translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
12590 cbradney 2741
    </message>
2742
    <message>
2743
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
2744
        <source>setColumnGap(size, [&quot;name&quot;])
2745
 
2746
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
2747
&quot;name&quot; is not given the currently selected item is used.
2748
 
2749
May throw ValueError if the column gap is out of bounds (must be positive).
2750
</source>
12612 cbradney 2751
        <translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
12590 cbradney 2752
 
2753
Setzt den Spaltenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
2754
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.
2755
 
2756
Ist der Abstand nicht positiv, wird der Fehler ValueError ausgegeben.</translation>
2757
    </message>
2758
    <message>
2759
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
2760
        <source>setColumns(nr, [&quot;name&quot;])
2761
 
2762
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
2763
If &quot;name&quot; is not given the currently selected item is used.
2764
 
2765
May throw ValueError if number of columns is not at least one.
2766
</source>
12612 cbradney 2767
        <translation type="obsolete">setColumns(nr, [&quot;name&quot;])
12590 cbradney 2768
 
2769
Legt die Anzahl der Spalten im Textrahmen &quot;name&quot; fest auf &quot;nr&quot; fest.
2770
Wenn &quot;name&quot; nicht angegeben ist, wird der aktuelle Textrahmen verwendet.
2771
 
2772
Ist die Anzahl der Spalten kleiner als 1, wird der Fehler ValueError ausgegeben.</translation>
2773
    </message>
2774
    <message>
2775
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
2776
        <source>setTextAlignment(align, [&quot;name&quot;])
2777
 
2778
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
2779
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
2780
be one of the ALIGN_ constants defined in this module - see dir(scribus).
2781
 
2782
May throw ValueError for an invalid alignment constant.
2783
</source>
12612 cbradney 2784
        <translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
12590 cbradney 2785
 
2786
Richtet den Text in dem Objekt &quot;name&quot; nach der Art &quot;align&quot; aus. Ist &quot;name&quot;
2787
nicht angegeben, wird der aktuelle Textrahmen verwendet. &quot;align&quot; ist eine der
2788
ALIGN_*-Konstanten. Siehe dir(scribus).
2789
 
2790
Bei einem falschen Argument wird der Fehler ValueError ausgegeben.</translation>
2791
    </message>
2792
    <message>
2793
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
2794
        <source>selectText(start, count, [&quot;name&quot;])
2795
 
2796
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
2797
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
2798
text selection will be cleared.  If &quot;name&quot; is not given the currently
2799
selected item is used.
2800
 
2801
May throw IndexError if the selection is outside the bounds of the text.
2802
</source>
12612 cbradney 2803
        <translation type="obsolete">selectText(start, count, [&quot;name&quot;])
12590 cbradney 2804
 
2805
Markiert &quot;count&quot; Zeichen des Textrahmens &quot;name&quot; beginnend mit dem Zeichen &quot;start&quot;.
2806
Die Zählung beginnt bei 0. Wenn &quot;count&quot;=0 ist, wird die Markierung gelöscht. Wenn &quot;name&quot;
2807
nicht angegeben ist, wird der aktuelle Textrahmen verwendet.
2808
 
2809
Wenn die Werte ungültig sind, wird der Fehler IndexError ausgegeben.</translation>
2810
    </message>
2811
    <message>
2812
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
2813
        <source>deleteText([&quot;name&quot;])
2814
 
2815
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
2816
only the selected text will be deleted. If &quot;name&quot; is not given the currently
2817
selected item is used.
2818
</source>
12612 cbradney 2819
        <translation type="obsolete">deleteText([&quot;name&quot;])
12590 cbradney 2820
 
2821
Löscht den Textrahmen &quot;name&quot;. Wenn Text ausgewählt ist, wird nur die Markierung
2822
gelöscht. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen gelöscht.</translation>
2823
    </message>
2824
    <message>
2825
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
2826
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
2827
 
2828
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
2829
is some text selected only the selected text is changed. If &quot;name&quot; is not
2830
given the currently selected item is used.
2831
</source>
12612 cbradney 2832
        <translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
12590 cbradney 2833
 
2834
Ändert die Farbe des Textes auf &quot;color&quot;. Wenn Text ausgewählt ist, wird die
2835
Markierung auf &quot;color&quot; geändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
2836
Textrahmen verwendet.</translation>
2837
    </message>
2838
    <message>
2839
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
2840
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
2841
 
2842
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
2843
selected item is used.
2844
</source>
12612 cbradney 2845
        <translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
12590 cbradney 2846
 
2847
Setzt die Farbe &quot;color&quot; für die Umrandung des Textes. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
2848
Textrahmen verwendet.</translation>
2849
    </message>
2850
    <message>
2851
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
2852
        <source>setTextShade(shade, [&quot;name&quot;])
2853
 
2854
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
2855
there is some text selected only the selected text is changed. &quot;shade&quot; must
2856
be an integer value in the range from 0 (lightest) to 100 (full color
2857
intensity). If &quot;name&quot; is not given the currently selected item is
2858
used.
2859
</source>
12612 cbradney 2860
        <translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
12590 cbradney 2861
 
2862
Setzt den Tonwert für den Textrahmen &quot;name&quot; auf &quot;shade&quot;.
2863
Ist Text in dem Rahmen ausgewählt, wird nur der ausgewählt Text
2864
verändert. &quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein.
2865
Ist &quot;name&quot; nicht vorhanden oder angegeben, wird der aktuelle Rahmen verwendet.</translation>
2866
    </message>
2867
    <message>
2868
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
2869
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
2870
 
2871
Link two text frames. The frame named &quot;fromname&quot; is linked to the
2872
frame named &quot;toname&quot;. The target frame must be an empty text frame
2873
and must not link to or be linked from any other frames already.
2874
 
2875
May throw ScribusException if linking rules are violated.
2876
</source>
12612 cbradney 2877
        <translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
12590 cbradney 2878
 
2879
Zwei Textrahmen verketten. &quot;Fromname&quot; wird mit &quot;Toname&quot; verkettet. Der Zielrahmen
2880
muss leer sein und darf nicht mit anderen Rahmen verkettet sein.
2881
 
2882
Werden die Regeln verletzt, erscheint der Fehler ScribusException.</translation>
2883
    </message>
2884
    <message>
2885
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
2886
        <source>unlinkTextFrames(&quot;name&quot;)
2887
 
2888
Remove the specified (named) object from the text frame flow/linkage. If the
2889
frame was in the middle of a chain, the previous and next frames will be
2890
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
2891
 
2892
May throw ScribusException if linking rules are violated.
2893
</source>
12612 cbradney 2894
        <translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
12590 cbradney 2895
 
2896
Entfernt den Textrahmen &quot;name&quot; aus der Reihe der verketteten Rahmen. Ist der
2897
zu entfernende Rahmen einer aus der Mitte der Reihe, wird der vorherige und nächste
2898
Rahmen miteinander verkettet, z.B. wird aus a-&gt;b-&gt;c dann a-&gt;c, wenn Sie Rahmen b
2899
entfernen.
2900
 
2901
Wenn die Verkettungsregeln gebrochen werden, erscheint der Fehler ScribusException.</translation>
2902
    </message>
2903
    <message>
2904
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
2905
        <source>traceText([&quot;name&quot;])
2906
 
2907
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
2908
currently selected item is used.</source>
12612 cbradney 2909
        <translation type="obsolete">traceText([&quot;name&quot;])
12590 cbradney 2910
 
2911
Konvertiert den Textrahmen &quot;name&quot; in Umrisse. Ist &quot;name&quot; nicht vorhanden oder
2912
vorgegeben, wird der aktuelle Textrahmen verwendet.</translation>
2913
    </message>
2914
    <message>
2915
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
2916
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
2917
 
2918
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
2919
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
2920
use text frame linking. Without this parameter it search all linking chain.
2921
 
2922
May raise WrongFrameTypeError if the target frame is not an text frame
2923
</source>
12612 cbradney 2924
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
12590 cbradney 2925
 
2926
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
2927
that the layer &quot;layer&quot; is visible, a value of False means that the layer
2928
&quot;layer&quot; is invisible.
2929
 
2930
May raise NotFoundError if the layer can&apos;t be found.
2931
May raise ValueError if the layer name isn&apos;t acceptable</translation>
2932
    </message>
2933
    <message>
2934
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
2935
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool
2936
 
2937
Does hyphenation on text frame &quot;name&quot;.
2938
If &quot;name&quot; is not given the currently selected item is used.
2939
 
2940
May raise WrongFrameTypeError if the target frame is not a text frame
2941
</source>
12612 cbradney 2942
        <translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; bool
12590 cbradney 2943
 
2944
Does hyphenation on text frame &quot;name&quot;.
2945
If &quot;name&quot; is not given the currently selected item is used.
2946
 
2947
May raise WrongFrameTypeError if the target frame is not a text frame</translation>
2948
    </message>
2949
    <message>
2950
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
2951
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool
2952
 
2953
Does dehyphenation on text frame &quot;name&quot;.
2954
If &quot;name&quot; is not given the currently selected item is used.
2955
 
2956
May raise WrongFrameTypeError if the target frame is not a text frame
2957
</source>
12612 cbradney 2958
        <translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; bool
12590 cbradney 2959
 
2960
Does dehyphenation on text frame &quot;name&quot;.
2961
If &quot;name&quot; is not given the currently selected item is used.
2962
 
2963
May raise WrongFrameTypeError if the target frame is not a text frame</translation>
2964
    </message>
2965
    <message>
2966
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
2967
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
2968
 
2969
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
2970
If &quot;name&quot; is not given the currently selected item is used.
2971
 
2972
May raise WrongFrameTypeError if the target frame is not a text frame
2973
</source>
12612 cbradney 2974
        <translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
12590 cbradney 2975
    </message>
2976
    <message>
2977
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
2978
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
2979
 
2980
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
2981
If &quot;name&quot; is not given the currently selected item is used.
2982
 
2983
May raise WrongFrameTypeError if the target frame is not a text frame
2984
</source>
12612 cbradney 2985
        <translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
12590 cbradney 2986
 
2987
Gibt zurück, ob der Textrahmen &quot;name&quot; ein PDF-Lesezeichen ist.
2988
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.
2989
 
2990
Der Fehler WrongFrameTypeError tritt auf, wenn der Zielrahmen kein Textrahmen ist</translation>
2991
    </message>
2992
    <message>
2993
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
2994
        <source>messagebarText(&quot;string&quot;)
2995
 
2996
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
2997
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
2998
</source>
12612 cbradney 2999
        <translation type="obsolete">messagebarText(&quot;string&quot;)
12590 cbradney 3000
 
3001
Schreibt &quot;string&quot; in die Statuszeile von Scribus. Der Text muss
3002
UTF8-kodiert oder ein &apos;unicode&apos;-String sein (empfohlen).</translation>
3003
    </message>
3004
    <message>
3005
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
3006
        <source>progressReset()
3007
 
3008
Cleans up the Scribus progress bar previous settings. It is called before the
3009
new progress bar use. See progressSet.
3010
</source>
12612 cbradney 3011
        <translation type="obsolete">progressReset()
12590 cbradney 3012
 
3013
Löscht die Fortschrittsanzeige. Wird aufgerufen, bevor eine neue Verlaufsanzeige benutzt wird.
3014
Siehe progressSet.</translation>
3015
    </message>
3016
    <message>
3017
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
3018
        <source>progressTotal(max)
3019
 
3020
Sets the progress bar&apos;s maximum steps value to the specified number.
3021
See progressSet.
3022
</source>
12612 cbradney 3023
        <translation type="obsolete">progressTotal(max)
12590 cbradney 3024
 
3025
Setzt die Gesamtzahl der Schritte für die Fortschrittsanzeige. Siehe progressSet.</translation>
3026
    </message>
3027
    <message>
3028
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
3029
        <source>progressSet(nr)
3030
 
3031
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
3032
progressTotal. The progress bar uses the concept of steps; you give it the
3033
total number of steps and the number of steps completed so far and it will
3034
display the percentage of steps that have been completed. You can specify the
3035
total number of steps with progressTotal(). The current number of steps is set
3036
with progressSet(). The progress bar can be rewound to the beginning with
3037
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
3038
</source>
12612 cbradney 3039
        <translation type="obsolete">progressSet(nr)
12590 cbradney 3040
 
3041
Die Fortschrittsanzeigen auf &quot;nr&quot; setzen, ein Wert relativ zum vorher festgelegten Wert
3042
für progressTotal. Die Fortschrittsanzeige verwendet Schritte zum Anzeigen des Verlaufs:
3043
Sie geben die Gesamtzahl der Schritte an und dann immer die fertigen Schritte - die Verlaufs-
3044
anzeige zeigt immer den Prozentsatz der fertigen Schritte an. Die Gesamtzahl der Schritte können
3045
Sie mit progressTotal() festlegen, die aktuelle Zahl der Schritte mit progressSet().
3046
Die Fortschrittsanzeige kann mit progressReset() zurückgesetzt werden. [Infos sind aus den
3047
Dokumenten von Trolltech Qt]</translation>
3048
    </message>
3049
    <message>
3050
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
3051
        <source>setCursor()
3052
 
3053
[UNSUPPORTED!] This might break things, so steer clear for now.
3054
</source>
12612 cbradney 3055
        <translation type="obsolete">setCursor()
12590 cbradney 3056
 
3057
[nicht unterstützt!] Bitte verwenden Sie diese Funktion zur Zeit noch nicht.</translation>
3058
    </message>
3059
    <message>
3060
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
3061
        <source>docChanged(bool)
3062
 
3063
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
3064
useful to call this procedure when you&apos;re changing the document, because Scribus
3065
won&apos;t automatically notice when you change the document using a script.
3066
</source>
12612 cbradney 3067
        <translation type="obsolete">docChanged(bool)
12590 cbradney 3068
 
3069
Aktiviert/Deaktivert das Icon zum Speichern und den entsprechenden Eintrag im Datei-Menü.
3070
Wenn Sie ein Dokument verändert ist es hilfreich, diese Funktion aufzurufen, weil Scribus im Script-
3071
Modus nicht automatisch erkennt, wann ein Dokument verändert wurde.</translation>
3072
    </message>
3073
    <message>
3074
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
3075
        <source>zoomDocument(double)
3076
 
3077
Zoom the document in main GUI window. Actions have whole number
3078
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
3079
</source>
12612 cbradney 3080
        <translation type="obsolete">zoomDocument(double)(new line)
12590 cbradney 3081
(new line)
3082
Zoom the document in main GUI window. Actions have whole number(new line)
3083
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.</translation>
3084
    </message>
3085
    <message>
3086
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
3087
        <source>scrollDocument(x,y)
3088
 
3089
Scroll the document in main GUI window by x and y.
3090
</source>
12612 cbradney 3091
        <translation type="obsolete">scrollDocument(x,y)
12590 cbradney 3092
 
3093
Scroll the document in main GUI window by x and y.
3094
</translation>
3095
    </message>
3096
    <message>
3097
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
3098
        <source>placeSVG(&quot;filename&quot;, x, y)
3099
 
3100
Places the SVG &quot;filename&quot; onto the current page,
3101
x and y specify the coordinate of the topleft corner of the SVG placed on the page
3102
 
3103
If loading was successful, the selection contains the imported SVG
3104
</source>
12612 cbradney 3105
        <translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
12590 cbradney 3106
Places the SVG &quot;filename&quot; onto the current page,
3107
x and y specify the coordinate of the topleft corner of the SVG placed on the page
3108
If loading was successful, the selection contains the imported SVG</translation>
3109
    </message>
3110
    <message>
3111
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
3112
        <source>placeEPS(&quot;filename&quot;, x, y)
3113
 
3114
Places the EPS &quot;filename&quot; onto the current page,
3115
x and y specify the coordinate of the topleft corner of the EPS placed on the page
3116
 
3117
If loading was successful, the selection contains the imported EPS
3118
</source>
12612 cbradney 3119
        <translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
12590 cbradney 3120
Places the EPS &quot;filename&quot; onto the current page,
3121
x and y specify the coordinate of the topleft corner of the EPS placed on the page
3122
If loading was successful, the selection contains the imported EPS</translation>
3123
    </message>
3124
    <message>
3125
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
3126
        <source>placeSXD(&quot;filename&quot;, x, y)
3127
 
3128
Places the SXD &quot;filename&quot; onto the current page,
3129
x and y specify the coordinate of the topleft corner of the SXD placed on the page
3130
 
3131
If loading was successful, the selection contains the imported SXD
3132
</source>
12612 cbradney 3133
        <translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
12590 cbradney 3134
Places the SXD &quot;filename&quot; onto the current page,
3135
x and y specify the coordinate of the topleft corner of the SXD placed on the page
3136
If loading was successful, the selection contains the imported SXD</translation>
3137
    </message>
3138
    <message>
3139
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
3140
        <source>placeODG(&quot;filename&quot;, x, y)
3141
 
3142
Places the ODG &quot;filename&quot; onto the current page,
3143
x and y specify the coordinate of the topleft corner of the ODG placed on the page
3144
 
3145
If loading was successful, the selection contains the imported ODG
3146
</source>
12612 cbradney 3147
        <translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
12590 cbradney 3148
Places the ODG &quot;filename&quot; onto the current page,
3149
x and y specify the coordinate of the topleft corner of the ODG placed on the page
3150
If loading was successful, the selection contains the imported ODG</translation>
3151
    </message>
3152
</context>
3153
<context>
12281 cbradney 3154
    <name>@default</name>
1135 cbradney 3155
    <message>
12590 cbradney 3156
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
1135 cbradney 3157
        <source>getColorNames() -&gt; list
3158
 
3159
Returns a list containing the names of all defined colors in the document.
3160
If no document is open, returns a list of the default document colors.
3161
</source>
12612 cbradney 3162
        <translation type="unfinished">getColorNames() -&gt; list
1135 cbradney 3163
 
3164
Gibt eine Liste zurück, die alle vorhandenen Farben des aktuellen Dokuments enthält.
3165
Wenn kein Dokument geöffnet ist, werden die Standardfarben zurückgegeben.</translation>
3166
    </message>
3167
    <message>
12590 cbradney 3168
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
1135 cbradney 3169
        <source>newDocDialog() -&gt; bool
3170
 
3171
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
3172
accepts the settings. Does not create a document if the user presses cancel.
3173
Returns true if a new document was created.
3174
</source>
12612 cbradney 3175
        <translation type="unfinished">newDocDialog() -&gt; bool
1135 cbradney 3176
 
3177
Zeigt den Dialog \&quot;Neues Dokument\&quot; an. Damit können Sie ein neues Dokument erstellen, wenn der Benutzer die standardmäßigen Einstellung aktzeptiert. Erzeugt kein neues Dokument, wenn der Benutzer auf \&quot;Abbrechen\&quot; klickt.
3178
Gibt den Wert \&quot;true\&quot; zurück, wenn ein neues Dokument erstellt wurde.</translation>
3179
    </message>
3180
    <message>
12590 cbradney 3181
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
1135 cbradney 3182
        <source>getFillColor([&quot;name&quot;]) -&gt; string
3183
 
3184
Returns the name of the fill color of the object &quot;name&quot;.
3185
If &quot;name&quot; is not given the currently selected item is used.
3186
</source>
12612 cbradney 3187
        <translation type="unfinished">getFillColor([&quot;name&quot;]) -&gt; string
1135 cbradney 3188
 
3189
Gibt den Wert der Füllfarbe des Objekts &quot;name&quot; zurück.
3190
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuell ausgewählt Objekt verwendet.</translation>
3191
    </message>
3192
    <message>
12590 cbradney 3193
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
1135 cbradney 3194
        <source>moveObject(dx, dy [, &quot;name&quot;])
3195
 
3196
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
3197
distances are expressed in the current measurement unit of the document (see
3198
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
3199
If the object &quot;name&quot; belongs to a group, the whole group is moved.
3200
</source>
12612 cbradney 3201
        <translation type="unfinished">moveObject(dx, dy [, &quot;name&quot;])
1135 cbradney 3202
 
3203
Verschiebt das Objekt &quot;name&quot; um dx und dy relativ zur Position. Die
3204
Entfernungsangaben werden in der Maßeinheit des Dokuments
3205
angegeben (siehe Konstanten UNIT*). Wenn &quot;name&quot; nicht vorhanden ist,
3206
wird das ausgewählte Objekt verschoben und wenn &quot;name&quot; zu einer Gruppe
3207
gehört, wird die gesamte Gruppe verschoben.</translation>
3208
    </message>
3209
    <message>
12590 cbradney 3210
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
1135 cbradney 3211
        <source>setRedraw(bool)
3212
 
3213
Disables page redraw when bool = False, otherwise redrawing is enabled.
3214
This change will persist even after the script exits, so make sure to call
3215
setRedraw(True) in a finally: clause at the top level of your script.
3216
</source>
12612 cbradney 3217
        <translation type="unfinished">setRedraw(bool)
1135 cbradney 3218
 
3219
Wenn bool=False, dann wird die Seite nicht neu neu aufgebaut (redraw ist deaktiviert).
2599 cbradney 3220
Standard ist bool=True. Diese Einstellung bleibt bestehen, auch wenn das Script beendet ist.
3221
Stellen Sie also sicher, dass setRedraw(True) aufgerufen wird, bevor das Script beendet wird.</translation>
1135 cbradney 3222
    </message>
3223
    <message>
12590 cbradney 3224
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
1135 cbradney 3225
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
3226
 
3227
Creates a new rectangle on the current page and returns its name. The
3228
coordinates are given in the current measurement units of the document
3229
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
3230
because you need this name to reference that object in future. If &quot;name&quot;
3231
is not given Scribus will create one for you.
3232
 
3233
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
3234
</source>
12612 cbradney 3235
        <translation type="unfinished">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
1135 cbradney 3236
 
3237
Erzeugt ein neues Rechteck auf der aktuellen Seite und gibt seinen Namen zurück. Die
3238
Koordinaten werden in der Maßeinheit des Dokuments angegeben (siehe UNIT-Konstanten).
3239
&quot;name&quot; sollte eine eindeutige Identifikation des Rechtecks ermöglichen, weil Sie den Objekt-
3240
namen immer wieder benötigen. Ist &quot;name&quot; nicht vorhanden, wählt Scribus einen Namen für Sie.
3241
 
3242
Wenn Sie einen schon verwendeten Namen benutzen, tritt der Fehler NameExistsError auf.</translation>
3243
    </message>
3244
    <message>
12590 cbradney 3245
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
1135 cbradney 3246
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
3247
 
3248
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
3249
the same as for setFillColor() and setFillShade(). See the constants for
3250
available types (FILL_&lt;type&gt;).
3251
</source>
12612 cbradney 3252
        <translation type="unfinished">setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
1135 cbradney 3253
 
3254
Füllt das Objekt &quot;name&quot; mit einem Farbverlauf. Farbbezeichnungen sind die
3255
gleichen wie für setFillColor() und setFillShade(). Siehe Konstanten
3256
für mögliche Typen (FILL_&lt;type&gt;).</translation>
3257
    </message>
3258
    <message>
12590 cbradney 3259
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
1135 cbradney 3260
        <source>getFontSize([&quot;name&quot;]) -&gt; float
3261
 
3262
Returns the font size in points for the text frame &quot;name&quot;. If this text
3263
frame has some text selected the value assigned to the first character of
3264
the selection is returned.
3265
If &quot;name&quot; is not given the currently selected item is used.
3266
</source>
12612 cbradney 3267
        <translation type="unfinished">getFontSize([&quot;name&quot;]) -&gt; float
1135 cbradney 3268
 
3269
Gibt die Schriftgröße in Punkten für den Textrahmen &quot;name&quot; zurück. Wenn innerhalb
3270
des Rahmens Text markiert ist, wird die Schriftgröße des ersten Zeichens verwendet.
3271
Wenn &quot;name&quot; nicht vergeben ist, wird der selektierte Textrahmen verwendet.</translation>
3272
    </message>
3273
    <message>
12590 cbradney 3274
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
1135 cbradney 3275
        <source>messagebarText(&quot;string&quot;)
3276
 
3277
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
3278
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
3279
</source>
12612 cbradney 3280
        <translation type="unfinished">messagebarText(&quot;string&quot;)
1135 cbradney 3281
 
3282
Schreibt &quot;string&quot; in die Statuszeile von Scribus. Der Text muss
3283
UTF8-kodiert oder ein &apos;unicode&apos;-String sein (empfohlen).</translation>
3284
    </message>
1525 cbradney 3285
    <message>
12590 cbradney 3286
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
2576 cbradney 3287
        <source>newPage(where [,&quot;masterpage&quot;])
3288
 
3289
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
3290
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
3291
counted from 1 upwards, no matter what the displayed first page number of your
3292
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
3293
master page for the new page.
3294
 
3295
May raise IndexError if the page number is out of range
3296
</source>
12612 cbradney 3297
        <translation type="unfinished">newPage(where [,&quot;masterpage&quot;])
3426 cbradney 3298
 
3299
Erzeugt eine neue Seite. Falls &quot;where&quot; -1 ist, wird die neue Seite an das Dokument angefügt,
3300
ansonsten wird die neue Seite vor &quot;where&quot; eingefügt. Seitennummern werden von 1 ab hoch-
3301
gezählt, egal welches die angezeigte erste Seitennummer Ihres Dokumentes ist. Der optionale
3302
Parameter &quot;masterpage&quot; legt den Namen der Musterseite für die neue Seite fest</translation>
2576 cbradney 3303
    </message>
2952 cbradney 3304
    <message>
11411 mrdocs 3305
        <location filename="../../scribus135/trunk/Scribus/scribus/po" line="136953768"/>
2952 cbradney 3306
        <source>importSVG(&quot;string&quot;)
3307
 
3308
The &quot;string&quot; must be a valid filename for a SVG image. The text
3309
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
3310
</source>
9195 cbradney 3311
        <translation type="obsolete">&quot;string&quot; muss ein gültiger Dateiname einer SVG-Datei sein. Der Text
3426 cbradney 3312
muss UTF8-kodiert oder ein Unicode-String (empfohlen) sein.</translation>
2952 cbradney 3313
    </message>
3824 cbradney 3314
    <message>
12590 cbradney 3315
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
3824 cbradney 3316
        <source>newDocument(size, margins, orientation, firstPageNumber,
7561 mrdocs 3317
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool
6530 cbradney 3318
 
3319
Creates a new document and returns true if successful. The parameters have the
3320
following meaning:
3321
 
3322
size = A tuple (width, height) describing the size of the document. You can
3323
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
3324
 
3325
margins = A tuple (left, right, top, bottom) describing the document
3326
margins
3327
 
3328
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
3329
 
3330
firstPageNumer = is the number of the first page in the document used for
3331
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
3332
numbers if you&apos;re creating a document in several parts.
3333
 
3334
unit: this value sets the measurement units used by the document. Use a
3335
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
3336
UNIT_PICAS, UNIT_POINTS.
3337
 
3338
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
3339
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
3340
PAGE_4 is 4-fold.
3341
 
3342
firstPageOrder = What is position of first page in the document.
3343
Indexed from 0 (0 = first).
3344
 
3345
numPage = Number of pages to be created.
3346
 
3347
The values for width, height and the margins are expressed in the given unit
3348
for the document. PAPER_* constants are expressed in points. If your document
3349
is not in points, make sure to account for this.
3350
 
3351
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
3352
PAGE_4, 3, 1)
3353
 
3354
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
3355
</source>
12612 cbradney 3356
        <translation type="unfinished">newDocument(size, margins, orientation, firstPageNumber,
7561 mrdocs 3357
(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)unit, pagesType, firstPageOrder, numPages) -&gt; bool
7426 cbradney 3358
 
7561 mrdocs 3359
Creates a new document and returns true if successful. The parameters have the(new line)
3360
following meaning:(new line)
3361
(new line)
7426 cbradney 3362
size = A tuple (width, height) describing the size of the document. You can
3363
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
3364
 
3365
margins = A tuple (left, right, top, bottom) describing the document
3366
margins
3367
 
3368
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
3369
 
3370
firstPageNumer = is the number of the first page in the document used for
3371
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
3372
numbers if you&apos;re creating a document in several parts.
3373
 
3374
unit: this value sets the measurement units used by the document. Use a
3375
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
3376
UNIT_PICAS, UNIT_POINTS.
3377
 
3378
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
3379
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
3380
PAGE_4 is 4-fold.
3381
 
3382
firstPageOrder = What is position of first page in the document.
3383
Indexed from 0 (0 = first).
3384
 
3385
numPage = Number of pages to be created.
3386
 
3387
The values for width, height and the margins are expressed in the given unit
3388
for the document. PAPER_* constants are expressed in points. If your document
3389
is not in points, make sure to account for this.
3390
 
3391
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
3392
PAGE_4, 3, 1)
3393
 
7561 mrdocs 3394
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.</translation>
6530 cbradney 3395
    </message>
9195 cbradney 3396
    <message>
12590 cbradney 3397
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
9195 cbradney 3398
        <source>placeSVG(&quot;filename&quot;, x, y)
3399
 
3400
Places the SVG &quot;filename&quot; onto the current page,
3401
x and y specify the coordinate of the topleft corner of the SVG placed on the page
3402
 
3403
If loading was successful, the selection contains the imported SVG
3404
</source>
12612 cbradney 3405
        <translation type="unfinished">placeSVG(&quot;filename&quot;, x, y)
9195 cbradney 3406
Places the SVG &quot;filename&quot; onto the current page,
3407
x and y specify the coordinate of the topleft corner of the SVG placed on the page
3408
If loading was successful, the selection contains the imported SVG</translation>
3409
    </message>
11411 mrdocs 3410
    <message>
12590 cbradney 3411
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
11411 mrdocs 3412
        <source>createParagraphStyle(...)
3413
 
3414
Creates a paragraph style. This function takes the following keyword parameters:
3415
 
3416
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
3417
 
3418
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
3419
 
3420
fixed linespacing:          0
3421
 
3422
automatic linespacing:      1
3423
 
3424
baseline grid linespacing:  2
3425
 
3426
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
3427
 
3428
alignment [optional] -&gt; specifies the alignment of the paragraph
3429
 
3430
-&gt; left:     0
3431
 
3432
-&gt; center:   1
3433
 
3434
-&gt; right:    2
3435
 
3436
-&gt; justify:  3
3437
 
3438
-&gt; extend:   4
3439
 
3440
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
3441
 
3442
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
3443
 
3444
firstindent [optional] -&gt; the indent of the first line
3445
 
3446
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
3447
 
3448
dropcaplines [optional] -&gt; height (in lines) of the caps if used
3449
 
3450
dropcapoffset [optional] -&gt; offset of the caps if used
3451
 
3452
&quot;charstyle&quot; [optional] -&gt; char style to use
3453
 
3454
</source>
12612 cbradney 3455
        <translation type="unfinished">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing:          0automatic linespacing:      1baseline grid linespacing:  2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left:     0-&gt; center:   1-&gt; right:    2-&gt; justify:  3-&gt; extend:   4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
11411 mrdocs 3456
    </message>
1135 cbradney 3457
    <message>
12281 cbradney 3458
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
1135 cbradney 3459
        <source>getColor(&quot;name&quot;) -&gt; tuple
3460
 
3461
Returns a tuple (C, M, Y, K) containing the four color components of the
3462
color &quot;name&quot; from the current document. If no document is open, returns
3463
the value of the named color from the default document colors.
3464
 
3465
May raise NotFoundError if the named color wasn&apos;t found.
3466
May raise ValueError if an invalid color name is specified.
3467
</source>
12612 cbradney 3468
        <translation type="unfinished">getColor(&quot;name&quot;) -&gt; tuple
1135 cbradney 3469
 
3470
Gibt eine Liste mit den vier Farbkomponenten der Farbe &quot;name&quot; im aktuellen
3471
Dokument wieder. Wenn kein Dokument geöffnet ist, werden die Werte der
3472
angegebenen Standardfarbe zurückgegeben.
3473
 
3474
Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
3475
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
3476
    </message>
3477
    <message>
12281 cbradney 3478
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
1135 cbradney 3479
        <source>changeColor(&quot;name&quot;, c, m, y, k)
3480
 
3481
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
3482
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
3483
Color components should be in the range from 0 to 255.
3484
 
3485
May raise NotFoundError if the named color wasn&apos;t found.
3486
May raise ValueError if an invalid color name is specified.
3487
</source>
12612 cbradney 3488
        <translation type="unfinished">changeColor(&quot;name&quot;, c, m, y, k)
1135 cbradney 3489
 
3490
Ändert die Farbe &quot;name&quot; auf die angegeben CMYK-Werte. Die Abkürzungen
3491
stehen für die vier Farben c=Cyan, m=Magenta, y=Yellow, b=Black.
3492
Die Werte müssen zwischen 0 und 255 liegen.
3493
 
3494
Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
3495
Wenn ein ungültiger Farbname angegeben wird, tritt der Fehler ValueError auf.</translation>
3496
    </message>
3497
    <message>
12281 cbradney 3498
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
1135 cbradney 3499
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
3500
 
3501
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
3502
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
3503
&quot;None&quot; - transparent.
3504
 
3505
deleteColor works on the default document colors if there is no document open.
3506
In that case, &quot;replace&quot;, if specified, has no effect.
3507
 
3508
May raise NotFoundError if a named color wasn&apos;t found.
3509
May raise ValueError if an invalid color name is specified.
3510
</source>
12612 cbradney 3511
        <translation type="unfinished">deleteColor(&quot;name&quot;, &quot;replace&quot;)
1135 cbradney 3512
 
3513
Löscht die Farbe &quot;name&quot;. An allen Stellen, wo &quot;name&quot; im Dokument auftritt,
3514
wird sie durch &quot;replace&quot; ersetzt. Standardmäßig ist &quot;replace&quot; gar keine Farbe -
3515
Transparenz.
3516
 
3517
Sie können deleteColor auch verwenden, wenn kein Dokument geöffnet ist, dann
3518
bleibt die Angabe von &quot;replace&quot; aber ohne Auswirkung.
3519
 
3520
Wenn die angegebene Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
3521
Wenn der Farbname ungültig ist, tritt der Fehler ValueError auf.</translation>
3522
    </message>
3523
    <message>
12281 cbradney 3524
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
1135 cbradney 3525
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
3526
 
3527
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
3528
 
3529
May raise NotFoundError if a named color wasn&apos;t found.
3530
May raise ValueError if an invalid color name is specified.
3531
</source>
12612 cbradney 3532
        <translation type="unfinished">replaceColor(&quot;name&quot;, &quot;replace&quot;)
1135 cbradney 3533
 
3534
An allen Stellen, wo die Farbe &quot;name&quot; vorkommt, wird sie duch die Farbe
3535
&quot;replace&quot; ersetzt.
3536
 
3537
Wenn eine der Farben nicht vorhanden ist, tritt der Fehler NotFoundError auf.
3538
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
3539
    </message>
3540
    <message>
12281 cbradney 3541
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
1135 cbradney 3542
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
3543
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
3544
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
3545
 
3546
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
3547
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
3548
button, OK, is displayed. Only the caption and message arguments are required,
3549
though setting an icon and appropriate button(s) is strongly
3550
recommended. The message text may contain simple HTML-like markup.
3551
 
3552
Returns the number of the button the user pressed. Button numbers start
3553
at 1.
3554
 
3555
For the icon and the button parameters there are predefined constants available
3556
with the same names as in the Qt Documentation. These are the BUTTON_* and
3557
ICON_* constants defined in the module. There are also two extra constants that
3558
can be binary-ORed with button constants:
3559
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
3560
    BUTTONOPT_ESCAPE    Pressing escape presses this button.
3561
 
3562
Usage examples:
3563
result = messageBox(&apos;Script failed&apos;,
3564
                    &apos;This script only works when you have a text frame selected.&apos;,
3565
                    ICON_ERROR)
3566
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
3567
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
3568
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
3569
 
3570
Defined button and icon constants:
3571
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
3572
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
3573
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
3574
</source>
12612 cbradney 3575
        <translation type="unfinished">messageBox(&quot;caption&quot;, &quot;message&quot;,icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
1135 cbradney 3576
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
3577
Zeigt einen Dialog mit dem Titel &quot;caption&quot;, der Botschaft &quot;message&quot; und dem Symbol &quot;icon&quot; sowie
3578
bis zu 3 Buttons an. Standard ist kein Symbol und ein OK-Button. Nur Titel und Botschaft sind
3579
erforderliche Felder, aber Symbol und Buttons werden empfohlen.
3580
Der Text der Botschaft kann auch einfachen HTML-Code enthalten.
3581
Gibt die Nummer des Buttons wieder, der gedrückt wurde, beginnend mit 1.
3582
Für Buttons und Symbole gibt es vordefinierte Konstanten, die gleichen wie in
3583
der Qt-Dokumentation.
3584
Die sind im Modul definiert und heißen BUTTON_* und ICON_* . Es gibt auch zwei
3585
spezielle Konstanten, die auch den Wert 0 annehmen können: BUTTONOPT_DEFAULT aktiviert den
3586
jeweiligen Button per Druck auf Enter.
3587
BUTTONOPT_ESCAPE drückt die Escape-Taste falls dieser Button gedrückt wird.
3588
Beispiel
3589
result = messageBox(&apos;Script failed&apos;,&apos;This script only works when you have a text frame selected.&apos;,
3590
ICON_ERROR)
3591
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,ICON_WARNING,
3592
BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
3593
Konstanten für Buttons und Symbole:
3594
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
3595
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
3596
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.</translation>
3597
    </message>
3598
    <message>
12281 cbradney 3599
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
1135 cbradney 3600
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string
3601
 
3602
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
3603
Parameters: window title, text in the window and optional &apos;default&apos; value.
3604
 
3605
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
3606
</source>
12612 cbradney 3607
        <translation type="unfinished">valueDialog(caption, message [,defaultvalue]) -&gt; string
1135 cbradney 3608
 
3609
Zeigt einen Dialog an, der einen String verlangt und zurückgibt.
3610
Parameter: Fenstertitel, Text im Fenster und optionaler &apos;default&apos;-Text.
3611
 
3612
Beispiel: valueDialog(&apos;TItel&apos;, &apos;Text im Fenster&apos;, &apos;optional&apos;)</translation>
3613
    </message>
3614
    <message>
12281 cbradney 3615
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
1135 cbradney 3616
        <source>closeDoc()
3617
 
3618
Closes the current document without prompting to save.
3619
 
3620
May throw NoDocOpenError if there is no document to close
3621
</source>
12612 cbradney 3622
        <translation type="unfinished">closeDoc()
1135 cbradney 3623
 
3624
Schließt das aktuelle Dokument, ohne Änderungen zu sichern.
3625
 
3626
Wenn kein Dokument offen ist, tritt der Fehler NoDocOpenError auf</translation>
3627
    </message>
3628
    <message>
12281 cbradney 3629
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
1135 cbradney 3630
        <source>haveDoc() -&gt; bool
3631
 
3632
Returns true if there is a document open.
3633
</source>
12612 cbradney 3634
        <translation type="unfinished">haveDoc() -&gt; bool
1135 cbradney 3635
 
3636
Gibt True zurück, wenn ein Dokument geöffnet ist.</translation>
3637
    </message>
3638
    <message>
12281 cbradney 3639
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
1135 cbradney 3640
        <source>openDoc(&quot;name&quot;)
3641
 
3642
Opens the document &quot;name&quot;.
3643
 
3644
May raise ScribusError if the document could not be opened.
3645
</source>
12612 cbradney 3646
        <translation type="unfinished">openDoc(&quot;name&quot;)
1135 cbradney 3647
 
3648
Öffnet das Dokument &quot;name&quot;.
3649
 
3650
Schlägt das fehl, tritt der Fehler ScribusError auf.</translation>
3651
    </message>
3652
    <message>
12281 cbradney 3653
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
1135 cbradney 3654
        <source>saveDoc()
3655
 
3656
Saves the current document with its current name, returns true if successful.
3657
If the document has not already been saved, this may bring up an interactive
3658
save file dialog.
3659
 
3660
If the save fails, there is currently no way to tell.
3661
</source>
12612 cbradney 3662
        <translation type="unfinished">saveDoc()
1135 cbradney 3663
 
3664
Speichert das Dokument unter dem aktuellen Namen und gibt True zurück, wenn das
3665
erfolgreich war. Wurde das Dokument noch nicht gesichert, öffnet sich der &quot;Speichern&quot;-
3666
Dialog.
3667
 
3668
Wenn das Sichern fehlschlägt, erscheint derzeit keine Fehlermeldung.</translation>
3669
    </message>
3670
    <message>
12281 cbradney 3671
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
1135 cbradney 3672
        <source>saveDocAs(&quot;name&quot;)
3673
 
3674
Saves the current document under the new name &quot;name&quot; (which may be a full or
3675
relative path).
3676
 
3677
May raise ScribusError if the save fails.
3678
</source>
12612 cbradney 3679
        <translation type="unfinished">saveDocAs(&quot;name&quot;)
1135 cbradney 3680
 
3681
Speichert das aktuelle Dokument unter dem neuen Namen &quot;name&quot;. Die Pfadangabe kann dabei
3682
relativ oder absolut sein.
3683
 
3684
Schlägt das Sichern fehl, tritt der Fehler ScribusError auf.</translation>
3685
    </message>
3686
    <message>
11411 mrdocs 3687
        <location filename="../../scribus135/trunk/Scribus/scribus/po" line="136953768"/>
1135 cbradney 3688
        <source>setMargins(lr, rr, tr, br)
3689
 
3690
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
3691
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
3692
constants.
3693
</source>
9729 cbradney 3694
        <translation type="obsolete">setMargins(lr, rr, tr, br)
1135 cbradney 3695
 
3696
Verändert die Ränder des Dokuments. Links=lr, Rechts=rr, Oben=tr, Unten=br.
3697
Die Einheit wird durch die Maßeinheit des Dokuments vorgegeben, siehe die
3698
Konstanten UNIT_&lt;type&gt;.</translation>
3699
    </message>
3700
    <message>
12281 cbradney 3701
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
1135 cbradney 3702
        <source>setUnit(type)
3703
 
3704
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
3705
defined as constants UNIT_&lt;type&gt;.
3706
 
3707
May raise ValueError if an invalid unit is passed.
3708
</source>
12612 cbradney 3709
        <translation type="unfinished">setUnit(type)
1135 cbradney 3710
 
3711
Ändert die Maßeinheit des Dokuments auf &quot;type&quot;. Mögliche Einheiten geben Sie durch die
3712
Konstanten UNIT_&lt;type&gt; an.
3713
 
3714
Ist die Einheit ungültig, tritt der Fehler ValueError auf.</translation>
3715
    </message>
3716
    <message>
12281 cbradney 3717
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
1135 cbradney 3718
        <source>getUnit() -&gt; integer (Scribus unit constant)
3719
 
3720
Returns the measurement units of the document. The returned value will be one
3721
of the UNIT_* constants:
3722
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
3723
</source>
12612 cbradney 3724
        <translation type="unfinished">getUnit() -&gt; integer (Scribus unit constant)
1135 cbradney 3725
 
3726
Gibt die Maßeinheit des Dokuments zurück. Der Rückgabewert ist eine
2222 cbradney 3727
der möglichen UNIT_*-Konstanten:
1135 cbradney 3728
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
3729
    </message>
3730
    <message>
12281 cbradney 3731
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
1135 cbradney 3732
        <source>loadStylesFromFile(&quot;filename&quot;)
3733
 
3734
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
3735
current document.
3736
</source>
12612 cbradney 3737
        <translation type="unfinished">loadStylesFromFile(&quot;filename&quot;)
1135 cbradney 3738
 
3739
Lädt die Absatzstile aus der Datei &quot;filename&quot; in das aktuelle Dokument.</translation>
3740
    </message>
3741
    <message>
12281 cbradney 3742
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
1135 cbradney 3743
        <source>setDocType(facingPages, firstPageLeft)
3744
 
3745
Sets the document type. To get facing pages set the first parameter to
3746
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
3747
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
3748
a right page use FIRSTPAGERIGHT.
3749
</source>
12612 cbradney 3750
        <translation type="unfinished">setDocType(facingPages, firstPageLeft)
1135 cbradney 3751
 
3752
Setzt den Dokumenttyp. Gegenüberliegende Seiten erreichen Sie mit FACINGPAGES, normale
3753
Seiten mit NOFACINGPAGES. Wenn die erste Seite links sein soll, schreiben Sie FIRSTPAGELEFT,
3754
ansonsten FIRSTPAGERIGHT.</translation>
3755
    </message>
3756
    <message>
12281 cbradney 3757
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
1135 cbradney 3758
        <source>getLineColor([&quot;name&quot;]) -&gt; string
3759
 
3760
Returns the name of the line color of the object &quot;name&quot;.
3761
If &quot;name&quot; is not given the currently selected item is used.
3762
</source>
12612 cbradney 3763
        <translation type="unfinished">getLineColor([&quot;name&quot;]) -&gt; string
1135 cbradney 3764
 
3765
Gibt den Namen der Linienfarbe des Objekts &quot;name&quot; zurück.
3766
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
3767
    </message>
3768
    <message>
12281 cbradney 3769
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
1135 cbradney 3770
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer
3771
 
3772
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
3773
is not given the currently selected Item is used.
3774
</source>
12612 cbradney 3775
        <translation type="unfinished">getLineWidth([&quot;name&quot;]) -&gt; integer
1135 cbradney 3776
 
3777
Gibt die Linienbreite des Objekts &quot;name&quot; zurück.
3778
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
3779
    </message>
3780
    <message>
12281 cbradney 3781
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
1135 cbradney 3782
        <source>getLineShade([&quot;name&quot;]) -&gt; integer
3783
 
3784
Returns the shading value of the line color of the object &quot;name&quot;.
3785
If &quot;name&quot; is not given the currently selected item is used.
3786
</source>
12612 cbradney 3787
        <translation type="unfinished">getLineShade([&quot;name&quot;]) -&gt; integer
1135 cbradney 3788
 
3789
Gibt den Tonwert des Objekts &quot;name&quot; zurück.
3790
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
3791
    </message>
3792
    <message>
11411 mrdocs 3793
        <location filename="../../scribus135/trunk/Scribus/scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
1135 cbradney 3794
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)
3795
 
3796
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
3797
the currently selected item is used.  The join types are:
3798
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
3799
</source>
10842 cbradney 3800
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (siehe Konstanten)
1135 cbradney 3801
 
3802
Gibt den Stil der Ecken des Objekts &quot;name&quot; zurück. Ist kein &quot;name&quot; angegeben, wird
3803
das aktuelle Objekt benutzt. Die Linientypen sind JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
3804
    </message>
3805
    <message>
12281 cbradney 3806
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
1135 cbradney 3807
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
3808
 
3809
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
3810
currently selected item is used. The cap types are:
3811
CAP_FLAT, CAP_ROUND, CAP_SQUARE
3812
</source>
12612 cbradney 3813
        <translation type="unfinished">getLineEnd([&quot;name&quot;]) -&gt; integer (siehe Konstanten)
1135 cbradney 3814
 
3815
Gibt den Stil der Linienrundungen des Objekts &quot;name&quot; an. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.
3816
Die unterstützten Stile sind CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
3817
    </message>
3818
    <message>
12281 cbradney 3819
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
1135 cbradney 3820
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
3821
 
3822
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
3823
currently selected item is used. Line style constants are:
3824
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
3825
</source>
12612 cbradney 3826
        <translation type="unfinished">getLineStyle([&quot;name&quot;]) -&gt; integer (siehe Konstanten)
1135 cbradney 3827
 
3828
Gibt den Linienstil des Objekts &quot;name&quot; wieder. Ist &quot;name&quot; nicht angegeben,
3829
wird das aktuelle Objekt benutzt. Linienstile sind LINE_DASH, LINE_DASHDOT,
3830
LINE_DASHDOTDOT, LINE_SOLID</translation>
3831
    </message>
3832
    <message>
12281 cbradney 3833
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
1135 cbradney 3834
        <source>getFillShade([&quot;name&quot;]) -&gt; integer
3835
 
3836
Returns the shading value of the fill color of the object &quot;name&quot;.
3837
If &quot;name&quot; is not given the currently selected item is used.
3838
</source>
12612 cbradney 3839
        <translation type="unfinished">getFillShade([&quot;name&quot;]) -&gt; integer
1135 cbradney 3840
 
3841
Gibt den Tonwert der Füllfarbe von &quot;name&quot; zurück. Ist &quot;name&quot; nicht angegeben, wird
3842
das aktuelle Objekt verwendet.</translation>
3843
    </message>
3844
    <message>
12281 cbradney 3845
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
1135 cbradney 3846
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
3847
 
3848
Returns a (x, y) tuple containing the scaling values of the image frame
3849
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
3850
</source>
12612 cbradney 3851
        <translation type="unfinished">getImageScale([&quot;name&quot;]) -&gt; (x,y)(
1135 cbradney 3852
 
3853
Gibt ein Zahlenpaar (x,y) zurück mit den Skalierungswerten des Bildes im Rahmen
3854
&quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Rahmen verwendet.</translation>
3855
    </message>
3856
    <message>
12281 cbradney 3857
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
1135 cbradney 3858
        <source>getImageName([&quot;name&quot;]) -&gt; string
3859
 
3860
Returns the filename for the image in the image frame. If &quot;name&quot; is not
3861
given the currently selected item is used.
3862
</source>
12612 cbradney 3863
        <translation type="unfinished">getImageName([&quot;name&quot;]) -&gt; string
1135 cbradney 3864
 
3865
Gibt den Dateinamen des Bildes im Rahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
3866
angegeben, wird das aktuelle Objekt benutzt.</translation>
3867
    </message>
3868
    <message>
12281 cbradney 3869
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
1135 cbradney 3870
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)
3871
 
3872
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
3873
If &quot;name&quot; is not given the currently selected item is used. The size is
3874
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
3875
for reference.
3876
</source>
12612 cbradney 3877
        <translation type="unfinished">getSize([&quot;name&quot;]) -&gt; (Breite,Höhe)
1135 cbradney 3878
 
3879
Gibt das Zahlenpaar (Breite,Höhe) des Objekts &quot;name&quot; zurück. Ist &quot;name&quot; nicht
3880
angegeben, wird das aktuelle Objekt verwendet. Die Größe wird in der Maßeinheit
3881
des Dokuments angegeben - siehe die UNIT_*-Konstanten.</translation>
3882
    </message>
3883
    <message>
12281 cbradney 3884
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
1135 cbradney 3885
        <source>getRotation([&quot;name&quot;]) -&gt; integer
3886
 
3887
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
3888
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
3889
is used.
3890
</source>
12612 cbradney 3891
        <translation type="unfinished">getRotation([&quot;name&quot;]) -&gt; integer
1135 cbradney 3892
 
3893
Gibt die Drehung des Objekts &quot;name&quot; in Grad zurück und im Uhrzeigersinn zurück.
3894
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
3895
    </message>
3896
    <message>
12281 cbradney 3897
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
1135 cbradney 3898
        <source>getAllObjects() -&gt; list
3899
 
3900
Returns a list containing the names of all objects on the current page.
3901
</source>
12612 cbradney 3902
        <translation type="unfinished">getAllObjects() -&gt; list
1135 cbradney 3903
 
3904
Gibt eine Liste zurück mit allen auf der aktuellen Seite verwendeten Objekte.</translation>
3905
    </message>
3906
    <message>
12281 cbradney 3907
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
1135 cbradney 3908
        <source>moveObjectAbs(x, y [, &quot;name&quot;])
3909
 
3910
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
3911
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
3912
is not given the currently selected item is used.  If the object &quot;name&quot;
3913
belongs to a group, the whole group is moved.
3914
</source>
12612 cbradney 3915
        <translation type="unfinished">moveObjectAbs(x, y [, &quot;name&quot;])
1135 cbradney 3916
 
3917
Bewegt das Objekt &quot;name&quot; an die neue Stelle. Die Koordinaten werden in der Maßeinheit
3918
des Dokuments angegeben (siehe UNIT_*-Konstanten). Ist &quot;name&quot; nicht angegeben, wird das
3919
aktuelle Objekt benutzt. Gehört &quot;name&quot; zu einer Gruppe, wird die Gruppe verschoben.</translation>
3920
    </message>
3921
    <message>
11411 mrdocs 3922
        <location filename="../../scribus135/trunk/Scribus/scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
1135 cbradney 3923
        <source>rotateObject(rot [, &quot;name&quot;])
3924
 
3925
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
3926
rotated by the vertex that is currently selected as the rotation point - by
3927
default, the top left vertext at zero rotation. Positive values mean counter
3928
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
3929
given the currently selected item is used.
3930
</source>
10842 cbradney 3931
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
1135 cbradney 3932
 
3933
Dreht das Objekt &quot;name&quot; relativ um &quot;rot&quot; Grad. Beim Drehen wird der Ursprung verwendet,
3934
der gerade aktiv ist - normalerweise der Punkt links oben. Positive Werte für &quot;rot&quot; bedeuten
3935
Drehung in Uhrzeigersinn, negative Werte Drehung gegen den Uhrzeigersinn. Ist &quot;name&quot; nicht
3936
angegeben, wird das aktuelle Objekt benutzt.</translation>
3937
    </message>
3938
    <message>
12281 cbradney 3939
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
1135 cbradney 3940
        <source>sizeObject(width, height [, &quot;name&quot;])
3941
 
3942
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
3943
is not given the currently selected item is used.
3944
</source>
12612 cbradney 3945
        <translation type="unfinished">sizeObject(width, height [, &quot;name&quot;])
1135 cbradney 3946
 
3947
Ändert die Größe von &quot;name&quot; auf die Breite width und die Höhe height.
3948
ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
3949
    </message>
3950
    <message>
12281 cbradney 3951
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
1135 cbradney 3952
        <source>getSelectedObject([nr]) -&gt; string
3953
 
3954
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
3955
of the selected object, e.g. 0 means the first selected object, 1 means the
3956
second selected Object and so on.
3957
</source>
12612 cbradney 3958
        <translation type="unfinished">getSelectedObject([nr]) -&gt; string
1135 cbradney 3959
 
3960
Gibt den Namen des ausgewählten Objekts zurück. &quot;nr&quot; gibt die Zahl des gewählten
3961
Objekts an. 0 bedeutet das erste ausgewählte Objekt, 1 das zweite usw.</translation>
3962
    </message>
3963
    <message>
12281 cbradney 3964
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
1135 cbradney 3965
        <source>selectionCount() -&gt; integer
3966
 
3967
Returns the number of selected objects.
3968
</source>
12612 cbradney 3969
        <translation type="unfinished">selectionCount() -&gt; integer
1135 cbradney 3970
 
3971
Gibt die Anzahl der ausgewählten Objekte zurück.</translation>
3972
    </message>
3973
    <message>
12281 cbradney 3974
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
1135 cbradney 3975
        <source>selectObject(&quot;name&quot;)
3976
 
3977
Selects the object with the given &quot;name&quot;.
3978
</source>
12612 cbradney 3979
        <translation type="unfinished">selectObject(&quot;name&quot;)
1135 cbradney 3980
 
3981
Wählt das Objekt &quot;name&quot; aus.</translation>
3982
    </message>
3983
    <message>
12281 cbradney 3984
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
1135 cbradney 3985
        <source>deselectAll()
3986
 
3987
Deselects all objects in the whole document.
3988
</source>
12612 cbradney 3989
        <translation type="unfinished">deselectAll()
1135 cbradney 3990
 
3991
Setzt alle Objekte im Dokument auf nicht ausgewählt.</translation>
3992
    </message>
3993
    <message>
12281 cbradney 3994
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
1135 cbradney 3995
        <source>groupObjects(list)
3996
 
3997
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
3998
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
3999
items are used.
4000
</source>
12612 cbradney 4001
        <translation type="unfinished">groupObjects(list)
1135 cbradney 4002
 
4003
Gruppiert die Elemente in &quot;list&quot;. &quot;list&quot; muss die Namen der zu gruppierenden
4004
Objekte enthalten. Ist &quot;list&quot; nicht angegeben, werden die aktuell gewählten
4005
Objekte verwendet.</translation>
4006
    </message>
4007
    <message>
12281 cbradney 4008
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
1135 cbradney 4009
        <source>unGroupObjects(&quot;name&quot;)
4010
 
4011
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
12612 cbradney 4012
        <translation type="unfinished">unGroupObjects(&quot;name&quot;)
1135 cbradney 4013
 
4014
Zerstört die Gruppe &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird die aktuelle Gruppe verwendet.</translation>
4015
    </message>
4016
    <message>
12281 cbradney 4017
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
1135 cbradney 4018
        <source>scaleGroup(factor [,&quot;name&quot;])
4019
 
4020
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
4021
the group, values smaller than 1 make the group smaller e.g a value of 0.5
4022
scales the group to 50 % of its original size, a value of 1.5 scales the group
4023