getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. moveSelectionToFront() Moves current selection to front. moveSelectionToFront() Moves current selection to back. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). importPage("fromDoc", (pageList), [create, imortwhere, importwherePage]) Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function. fromDoc: string; the filename of the document to import pages from pageList: tuple with page numbers of pages to import create: number; 0 to replace existing pages, 1 (default) to insert new pages importWhere: number; the page number (of the current document) at which import the pages importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. createParagraphStyle(...) Creates a paragraph style. This function takes the following keyword parameters: "name" [required] -> specifies the name of the paragraphstyle to create linespacingmode [optional] -> specifies the linespacing mode; possible modes are: fixed linespacing: 0 automatic linespacing: 1 baseline grid linespacing: 2 linespacing [optional] -> specifies the linespacing if using fixed linespacing alignment [optional] -> specifies the alignment of the paragraph -> left: 0 -> center: 1 -> right: 2 -> justify: 3 -> extend: 4 leftmargin [optional], rightmargin [optional] -> specify the margin gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs firstindent [optional] -> the indent of the first line hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no) dropcaplines [optional] -> height (in lines) of the caps if used dropcapoffset [optional] -> offset of the caps if used "charstyle" [optional] -> char style to use createCharStyle(...) Creates a character style. This function takes the following keyword parameters: "name" [required] -> name of the char style to create "font" [optional] -> name of the font to use fontsize [optional] -> font size to set (double) "features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!): -> inherit -> bold -> italic -> underline -> underlinewords -> strike -> superscript -> subscript -> outline -> shadowed -> allcaps -> smallcaps "fillcolor" [optional], "fillshade" [optional] -> specify fill options "strokecolor" [optional], "strokeshade" [optional] -> specify stroke options baselineoffset [optional] -> offset of the baseline shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used outlinewidth [optional] -> width of the outline if used underlineoffset [optional], underlinewidth [optional] -> underline options if used strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used scaleh [optional], scalev [optional] -> scale of the chars tracking [optional] -> tracking of the text "language" [optional] -> language code getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getTextDistances(["name"]) -> tuple Returns the text distances of the text frame "name" expressed in points. The distances are returned as a tuple like (left, right, top, bottom). If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setTextDistances(left, right, top, bottom, ["name"]) Sets the text distances of the text frame "name" to the values "left" "right", "top" and "bottom". If "name" is not given the currently selected item is used. May throw ValueError if any of the distances are out of bounds (must be positive). setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame hyphenateText(["name"]) -> bool Does hyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> bool Does dehyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. scrollDocument(x,y) Scroll the document in main GUI window by x and y. placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG @default AIPlug Importing: %1 Analyzing File: Group%1 Grupp%1 Generating Items Elementide genereerimine About About Scribus %1 Scribus %1 info %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 Ghostscripti versioon %1 No Ghostscript version available Ghostscripti versioon pole teada <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribuse versioon %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: Ehitamise ID: &About &Info Development Team: Arendajate meeskond: Contributions from: Kaasautorid: Mac OS&#174; X Aqua Port: Mac OS&#174; X Aqua port: Windows&#174; Port: Windows&#174; port: Official Documentation: Ametlik dokumentatsioon: Other Documentation: Muu dokumentatsioon: Tango Project Icons: Tango projekti ikoonid: A&uthors A&utorid Official Translations and Translators: Ametlikud tõlked ja tõlkijad: Previous Translation Contributors: Varasemad tõlkijad: &Translations &Tõlked Homepage Kodulehekülg Online Reference Dokumentatsioon internetis Wiki Wiki Bugs and Feature Requests Veateated ja soovid Mailing List Meililist &Online I&nternet &Close S&ulge This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. See dialoog näitab Scribuse versiooni, ehitamise aega ja kompileeritud teekide toetust. Lühendis C-C-T-F tähendab C littlecms'i, teine C CUPS-i, T TIFF-i ja F Fontconfig'i tuge. Viimane täht näitab renderdajat: C=cairo või A=libart. Teegi toe puudumist näitab *. Samuti näeb siin Ghostscripti versiooni, mille Scribus leidis. &Updates &Uuendused Check for &Updates Kontrolli &uuendusi This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. See dialoog näitab Scribuse versiooni, ehitamise aega ja kompileeritud teekide toetust. Lühendis C-C-T-F tähendab C littlecms'i, teine C CUPS-i, T TIFF-i ja F Fontconfig'i tuge. Viimane täht näitab renderdajat: C=cairo või A=libart. Teegi toe puudumist näitab *. Samuti näeb siin Ghostscripti versiooni, mille Scribus leidis. Windowsi versioon ei kasuta Fontconfig'i ega CUPS-i teeke. Check for updates to Scribus. No data from your machine will be transferred off it. Scribuse uuenduste kontrollimine. Masinast ei saadeta selleks välja mingeid andmeid. OS/2&#174;/eComStation&#8482; Port: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribuse versioon Check for Updates Abort Update Check Developer Blog &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Filename: Failinimi: Version: Versioon: Yes Jah No Ei Enabled: Lubatud: Release Date: Väljalaskeaeg: Description: Kirjeldus: Author(s): Autor(id): Copyright: Autoriõigus: License: Litsents: Scribus: About Plug-ins Scribus: pluginate info AboutPluginsBase Scribus: About Plug-ins Scribus: pluginate info &Close S&ulge Alt+C Alt+C ActionManager &New &Uus &Open... &Ava... &Close S&ulge &Save &Salvesta Save &As... Salvesta &kui... Re&vert to Saved &Taasta salvestatud versioon Collect for O&utput... Ko&gu väljundiks... Get Text... Hangi tekst... Append &Text... Lisa &tekst... Get Image... Hangi pilt... Save &Text... Salvesta &tekst... Save as &EPS... Salvesta &EPS-failina... Save as P&DF... Salvesta P&DF-failina... Document &Setup... Dokumendi &seadistused... &Print... &Trüki... Print Previe&w T&rükkimise eelvaatlus &Quit &Välju &Undo &Võta tagasi &Redo &Tee uuesti &Item Action Mode Val&itud elemendi režiim Cu&t &Lõika &Copy &Kopeeri &Paste &Aseta Paste (&Absolute) Aseta (a&bsoluutselt) C&lear &Puhasta Select &All &Vali kõik &Deselect All &Tühista kõik valikud &Search/Replace... Ot&si/asenda... Edit Image... Redigeeri pilti... C&olors... Vä&rvid... S&tyles... S&tiilid... &Paragraph Styles... &Lõigu stiilid... &Line Styles... &Joone stiilid... &Master Pages... Le&heküljetoorikud... &JavaScripts... &JavaScriptid... P&references... &Seadistused... %1 pt %1 pt &Other... &Muu... &Left &Vasakule &Center &Keskele &Right &Paremale &Block &Rööpjoondus &Forced Pü&siv rööpjoondus &%1 % &%1 % &Normal &Normaalne &Underline Alla&joonitud Underline &Words &Sõnade allajoonimine &Strike Through &Läbikriipsutatud &All Caps S&uurtähed Small &Caps &Kapiteelkiri Su&perscript Ü&laindeks Su&bscript Ala&indeks &Outline type effect K&ontuur S&hadow &Vari &Image Effects &Pildiefektid &Tabulators... &Tabeldusmärgid... D&uplicate &Klooni &Multiple Duplicate Klooni &mitmekordselt &Delete K&ustuta &Group &Rühmita &Ungroup Lõh&u rühm Is &Locked &Lukustatud Si&ze is Locked &Suurus lukustatud &Printing Enabled &Trükkimine lubatud &Flip Horizontally Pee&gelda rõhtsalt &Flip Vertically Pee&gelda püstiselt Lower to &Bottom V&ii kõige taha Raise to &Top Too &kõige ette &Lower &Vii tahapoole &Raise &Too ettepoole Send to S&crapbook Saada &visandimappi &Attributes... &Atribuudid... More Info... Rohkem infot... I&mage Visible Pilt &nähtaval &Update Image &Uuenda pilti Adjust Frame to Image Sobita pilt kasti Extended Image Properties Pildi laiendatud omadused &Low Resolution &Madala kvaliteediga &Normal Resolution &Normaalse kvaliteediga &Full Resolution &Täieliku kvaliteediga Is PDF &Bookmark On PDF-i &järjehoidja Is PDF A&nnotation On PDF-i &annotatsioon Annotation P&roperties A&nnotatsiooni omadused Field P&roperties &Välja omadused &Edit Shape... &Muuda kuju... &Attach Text to Path Lis&a tekst trajektoorile &Detach Text from Path &Haagi tekst trajektoori küljest lahti &Combine Polygons Ü&henda hulknurgad Split &Polygons Lah&uta hulknurgad &Bezier Curve &Bezier' kõver &Image Frame P&ildikast &Outlines Convert to oulines &Kontuurid &Polygon &Hulknurk &Text Frame &Tekstikast &Glyph... &Glüüf... Sample Text Näidistekst &Insert... L&isa... Im&port... Im&pordi... &Delete... &Eemalda... &Copy... &Kopeeri... &Move... &Liiguta... &Apply Master Page... &Rakenda leheküljetoorikut... Convert to Master Page... Salvesta leheküljetoorikuna... Manage &Guides... Halda &juhtjooni... Manage Page Properties... Halda lehekülje omadusi... &Fit in window So&bita aknasse &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails &Pisipildid Show &Margins &Veeriste näitamine Show &Frames &Kastide näitamine Show &Images P&iltide näitamine Show &Grid &Alusvõrgu näitamine Show G&uides &Juhtjoonte näitamine Show &Baseline Grid Al&usjoonte näitamine Show &Text Chain &Tekstiahela näitamine Show Control Characters Mittetrükitavate märkide näitamine Show Rulers Joonlaudade näitamine Rulers relative to Page Joonlauad on seotud leheküljega Sn&ap to Grid Tõmme &alusvõrgule Sna&p to Guides Tõmme &juhtjoontele &Properties &Omadused &Outline Document Outline Palette &Struktuur &Scrapbook &Visandimapp &Layers &Kihid &Arrange Pages L&ehekülgede korraldamine &Bookmarks &Järjehoidjad &Measurements &Mõõdud Action &History T&oimingute ajalugu Preflight &Verifier Trük&ieelne kontroll &Align and Distribute Joo&ndus ja jaotus &Tools &Tööriistad P&DF Tools P&DF-i tööriistad Select Item Vali element T&able T&abel &Shape &Kujund &Line &Joon &Freehand Line &Vabakäejoon Rotate Item Pööra elementi Zoom in or out Suurenda või vähenda Zoom in Suurenda Zoom out Vähenda Edit Contents of Frame Redigeeri kasti sisu Edit Text... Redigeeri teksti... Link Text Frames Lingi tekstikastid Unlink Text Frames Eemalda tekstikastide link &Eye Dropper &Värvivalija Copy Item Properties Kopeeri elemendi omadused Edit the text with the Story Editor Redigeeri teksti looredaktoris Insert Text Frame Lisa tekstikast Insert Image Frame Lisa pildikast Insert Table Lisa tabel Insert Shape Lisa kujund Insert Polygon Lisa hulknurk Insert Line Lisa joon Insert Bezier Curve Lisa Bezier' kõver Insert Freehand Line Lisa vabakäejoon Insert PDF Push Button Lisa PDF-i kinnitusnupp Insert PDF Text Field Lisa PDF-i tekstiväli Insert PDF Check Box Lisa PDF-i märkekast Insert PDF Combo Box Lisa PDF-i liitkast Insert PDF List Box Lisa PDF-i nimekirjakast Insert Text Annotation Lisa teksti annotatsioon Insert Link Annotation Lisa lingi annotatsioon &Manage Pictures Piltide &haldamine &Hyphenate Text &Poolitamise lubamine Dehyphenate Text Poolitamise keelamine &Generate Table Of Contents Sisukorra &genereerimine &Cascade &Kaskaadi &Tile &Paanidena &About Scribus &Scribuse info &About Plug-ins &Pluginate info About &Qt &Qt info Toolti&ps &Vihjed Scribus &Manual... S&cribuse käsiraamat... Toggle Palettes Lülita palette Toggle Guides Lülita juhtjooni Smart &Hyphen &Poolituskoht Non Breaking Dash Sidekriips Non Breaking &Space &Sisetühik Page &Number Lehekülje&number New Line Uus rida Frame Break Kasti katkestus Column Break Veeru katkestus Copyright Autoriõigus Registered Trademark Registreeritud kaubamärk Trademark Kaubamärk Solidus Kaldkriips Bullet Täpp Middle Dot Punkt keskel Em Dash Pikk mõttekriips En Dash Lühike mõttekriips Figure Dash Arvuvahemiku kriips Quotation Dash Tsitaadikriips Apostrophe Ülakoma Straight Double Sirged topelt Single Left Ühekordne vasakpoolne Single Right Ühekordne parempoolne Double Left Kahekordne vasakpoolne Double Right Kahekordne parempoolne Single Reversed Ühekordne ümberpööratud Double Reversed Kahekordne ümberpööratud Single Left Guillemet Ühekordne vasakpoolne prantsuse Single Right Guillemet Ühekordne parempoolne prantsuse Double Left Guillemet Kahekordne vasakpoolne prantsuse Double Right Guillemet Kahekordne parempoolne prantsuse Low Single Comma Ühekordne alumine koma Low Double Comma Kahekordne alumine koma CJK Single Left CJK ühekordne vasakpoolne CJK Single Right CJK ühekordne parempoolne CJK Double Left CJK kahekordne vasakpoolne CJK Double Right CJK kahekordne parempoolne En Space Enn-tühik Em Space Emm-tühik Thin Space Kitsas tühik Thick Space Lai tühik Mid Space Keskmine tühik Hair Space Juuksekarvatühik Insert Smart Hyphen Lisa poolituskoht Insert Non Breaking Dash Lisa sidekriips Insert Non Breaking Space Lisa sisetühik Insert Page Number Lisa leheküljenumber ff ff fi fi fl fl ffi ffi ffl ffl ft ft st st Show Text Frame Columns Tekstikasti veergude näitamine Get Text 2... Hangi tekst 2... &Frame... &Kast... Preview Mode Eelvaatluse režiim Show Layer Indicators Kihi indikaatorite näitamine Patterns... Mustrid... Send to Patterns Lisatakse mustritesse Sticky Tools &Fit to Height Fit to Width Mahutamine laiusele Show Bleeds &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Ülakoma Straight Double Unicode 0x0022 Sirged topelt Single Left Unicode 0x2018 Ühekordne vasakpoolne Single Right Unicode 0x2019 Ühekordne parempoolne Double Left Unicode 0x201C Kahekordne vasakpoolne Double Right Unicode 0x201D Kahekordne parempoolne Single Reversed Unicode 0x201B Ühekordne ümberpööratud Double Reversed Unicode 0x201F Kahekordne ümberpööratud Single Left Guillemet Unicode 0x2039 Ühekordne vasakpoolne prantsuse Single Right Guillemet Unicode 0x203A Ühekordne parempoolne prantsuse Double Left Guillemet Unicode 0x00AB Kahekordne vasakpoolne prantsuse Double Right Guillemet Unicode 0x00BB Kahekordne parempoolne prantsuse Low Single Comma Unicode 0x201A Ühekordne alumine koma Low Double Comma Unicode 0x201E Kahekordne alumine koma CJK Single Left Unicode 0x300C CJK ühekordne vasakpoolne CJK Single Right Unicode 0x300D CJK ühekordne parempoolne CJK Double Left Unicode 0x300E CJK kahekordne vasakpoolne CJK Double Right Unicode 0x300F CJK kahekordne parempoolne &400% &200% {400%?} Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Joonlauad on seotud leheküljega Insert &Render Frame Check for Updates Number of Pages Adjust Image to Frame Move/Resize value indicator AdjustCmsDialog CMS Settings AlignDistribute Align Joondus &Selected Guide: &Valitud juhtjoon: &Relative To: &Seotud: ... ... Distribute Jaotus &Distance: Va&hemaa: AlignDistributeBase Align and Distribute Joondus ja jaotus Align Joondus &Selected Guide: &Valitud juhtjoon: &Relative To: &Seotud: ... ... Distribute Jaotus &Distance: Va&hemaa: AlignDistributePalette Align and Distribute Joondus ja jaotus Align Joondus &Relative to: &Joondamise alus: First Selected Esimene valitud Last Selected Viimane valitud Page Lehekülg Margins Veerised Guide Juhtjoon Selection Valik Align right sides of objects to left side of anchor Objektide parema serva joondamine ankru vasaku serva järgi Align left sides of objects to right side of anchor Objektide vasaku serva joondamine ankru parema serva järgi Align bottoms Joondamine alumise serva järgi Align right sides Joondamine parema serva järgi Align tops of objects to bottom of anchor Objektide ülemise serva joondamine ankru alumise serva järgi Center on vertical axis Tsentreerimine püstteljel Align left sides Joondamine vasaku serva järgi Center on horizontal axis Tsentreerimine rõhtteljel Align bottoms of objects to top of anchor Objektide alumise serva joondamine ankru ülemise serva järgi Align tops Joondamine ülemise serva järgi &Selected Guide: &Valitud juhtjoon: Distribute Jaotus Make horizontal gaps between objects equal Objektide rõhtsate vahede võrdsustamine Make horizontal gaps between objects equal to the value specified Objektide rõhtsate vahede võrdsustamine määratud väärtuse järgi Distribute right sides equidistantly Paremate servade võrdsed vahed Distribute bottoms equidistantly Alumiste servade võrdsed vahed Distribute centers equidistantly horizontally Rõhtsuunas keskmete võrdsed vahed Make vertical gaps between objects equal Objektide püstiste vahede võrdsustamine Make vertical gaps between objects equal to the value specified Objektide püstiste vahede võrdsustamine määratud väärtuse järgi Distribute left sides equidistantly Vasakute servade võrdsed vahed Distribute centers equidistantly vertically Püstsuunas keskmete võrdsed vahed Distribute tops equidistantly Ülemiste servade võrdsed vahed &Distance: Va&hemaa: Distribute the items with the distance specified Elementide jaotus määratud vahemaa järgi None Selected Valik puudub Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Make horizontal gaps between objects and sides of page equal Objektide ja lehekülje külgede rõhtsate vahede võrdsustamine Make vertical gaps between objects and the top and bottom of page margins equal Objektide ja lehekülje üla- ja alaveerise püstiste vahede võrdsustamine Make horizontal gaps between objects and sides of page margins equal Objektide ja lehekülje külgveeriste rõhtsate vahede võrdsustamine Make vertical gaps between objects and the top and bottom of page equal Objektide ja lehekülje üla- ja alaserva püstiste vahede võrdsustamine Align right sides of items to left side of anchor Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left Joonda tekst vasakule Align Text Right Joonda tekst paremale Align Text Center Joonda tekst keskele Align Text Justified Rööpjoondus Align Text Forced Justified Püsiv rööpjoondus Annot Field Properties Välja omadused Type: Tüüp: Button Nupp Text Field Tekstiväli Check Box Märkekast Combo Box Liitkast List Box Nimekirjakast Properties Omadused Name: Nimi: Tool-Tip: Kohtspikker: Text Tekst Font for use with PDF 1.3: Font PDF 1.2 jaoks: Border Piire Color: Värv: Width: Laius: Thin Peen Normal Normaalne Wide Lai Style: Stiil: Solid Ühtlane Dashed Punktiir Underline Allajoonitud Beveled Esilekerkiv Inset Süvistatud Other Muu Read Only Ainult lugemiseks Required Nõutav Don't Export Value Väärtust ei ekspordita Visibility: Nähtavus: Visible Nähtav Hidden Peidetud No Print Ei trükita No View Ei näidata Appearance Välimus Text for Button Down Button Down tekst Text for Roll Over Roll Over tekst Icons Ikoonid Use Icons Ikoonide kasutamine Remove Eemalda Pressed Allavajutatud Roll Over Pealeliikumisel Icon Placement... Ikooni paigutus... Highlight Esiletõstmine None highlight Puudub Invert Inverteeritud Outlined Kontuuriga Push Vajutatav Multi-Line Mitmerealine Password Parool Limit of Piiratud Characters märgiga Do Not Scroll Ei kerita Do Not Spell Check Õigekirja ei kontrollita Check Style: Märkimise stiil: Check Linnuke Cross Rist Diamond Romb Circle Ring Star Täht Square Ruut Default is Checked Vaikimisi on märgitud Editable Redigeeritav Options Valikud None action Puudub JavaScript JavaScript Go To Liikumine Submit Form Vormi saatmine Reset Form Vormi lähtetamine Import Data Andmete import Event: Sündmus: Mouse Up Hiir alla Mouse Down Hiir üles Mouse Enter Hiir peale Mouse Exit Hiir ära On Focus Fookuses On Blur Pole fookuses Script: Skript: Edit... Redigeeri... Submit to URL: Saatmine URL-ile: Submit Data as HTML Andmed saadetakse HTML-ina Import Data from: Andmed imporditakse asukohast: Destination Sihtkoht To File: Fail: Change... Muuda... Page: Lehekülg: X-Pos: X-asukoht: pt pt Y-Pos: Y-asukoht: Action Toiming Field is formatted as: Välja vorming: Plain Puhas Number Arv Percentage Protsent Date Kuupäev Time Kellaaeg Custom Kohandatud Number Format Arvuvorming Decimals: Kümnendkohti: Use Currency Symbol Rahasümboli kasutamine Prepend Currency Symbol Rahasümbol ees Formatting Vorming Percent Format Protsendivorming Date Format Kuupäevavorming Time Format Kellaajavorming Custom Scripts Kohandatud skriptid Format: Vorming: Keystroke: Klahv: Format Vorming Value is not validated Väärtuse sobivust ei kontrollita Value must be greater than or equal to: Väärtus peab olema suurem kui või võrdne: and less or equal to: ja väiksem kui või võrdne: Custom validate script: Kohandatud sobivuse kontrollimise skript: Validate Sobivuse kontroll Value is not calculated Väärtust ei arvutata Value is the Väärtus on järgmiste väljade sum summa product korrutis average keskmine minimum miinimum maximum maksimum of the following fields: : Pick... Vali... Custom calculation script: Kohandatud arvutamise skript: Calculate Arvutamine OK OK Cancel Loobu Flag is ignored for PDF 1.3 Lippu ignoreeritakse PDF 1.3 korral Enter a comma separated list of fields here Sisesta siia komadega eraldatult väljade nimekiri You need at least the Icon for Normal to use Icons for Buttons Nuppudel ikoonide kasutamiseks on vaja vähemalt normaalse nupu ikooni Open Avamine Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) Pildid (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;Kõik failid (*) Example: Näide: Selection Change Valiku muutmine None Puudub PDF Files (*.pdf);;All Files (*) PDF-failid (*.pdf);;Kõik failid (*) Tooltip: Kohtspikker: Do Not Export Value Väärtust ei ekspordita Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Export absolute Filename Annota Annotation Properties Annotatsiooni omadused Text Tekst Link Link External Link Väline link External Web-Link Väline veebilink &Type: &Tüüp: Destination Sihtkoht C&hange... &Muuda... &Page: &Lehekülg: pt pt &X-Pos &X-asukoht &Y-Pos: &Y-asukoht: Open Avamine PDF-Documents (*.pdf);;All Files (*) PDF-dokumendid (*.pdf);;Kõik failid (*) %1;;All Files (*) Export absolute Filename ApplyMasterPageDialog Normal Normaalne Apply Master Page Leheküljetooriku rakendamine &Master Page: &Leheküljetoorik: Apply To Rakendatakse Current &page &Aktiivsele leheküljele Alt+P Alt+P &Even pages &Paarislehekülgedele Alt+E Alt+E O&dd pages Paa&ritutele lehekülgedele Alt+D Alt+D &All pages &Kõigile lehekülgedele Alt+A Alt+A &Within range &Vahemikule Alt+W Alt+W Apply the selected master page to even, odd or all pages within the following range Valitud leheküljetooriku rakendamine paaris-, paaritutele või kõigile lehekülgedele määratud vahemikus to kuni Alt+O Alt+O Alt+C Alt+C Possible Hyphenation Võimalik poolitus ArrowChooser None Puudub AspellPlugin Spell-checking support Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text. 0.1 Spell Checker Aspell Plugin Error AspellPluginBase Spell Check Replacement: &Add Word &Change &Exit &Välju Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: The currently active dictionary. Scribus uses aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. Ignore the current text not found in the active dictionary &Ignore &Ignoreeri Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close Sulge AspellPluginImpl Loaded default aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller. AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Spell Checker No available Aspell dictionaries found. Install some, please. Do you want start from the beginning of the selection with new language selected? AutoformButtonGroup Arrows Nooled Flow Chart Jigsaw Specials Erisümbolid Default Shapes Barcode &Barcode Generator... Ri&bakoodi generaator... Scribus frontend for Pure Postscript Barcode Writer Scribuse kasutajaliides puhtas PostScriptis loodud ribakoodi generaatorile &Barcode... Scribus frontend for Pure PostScript Barcode Writer BarcodeGenerator 12 or 13 digits 12 või 13 arvu 8 digits 8 arvu 11 or 12 digits 11 või 12 arvu 7 or 8 digits 7 või 8 arvu 5 digits 5 arvu 2 digits 2 arvu 9 or 10 digits separated appropriately with dashes 9 või 10 arvu, mugavuse mõttes eraldatud kriipsudega Variable number of characters, digits and any of the symbols -. *$/+%. Varieeruv arv tähti, arve ja sümboleid -. *$/+% Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Varieeruv arv ASCII sümboleid ja erifunktsioonide sümboleid. Algab esialgsele märgistikule vastava sobiva algustähega. UCC/EAN-128 nõuab, et algustähele järgneks tingimata FNC 1 sümbol. Variable number of digits and any of the symbols -$:/.+ABCD. Varieeruv arv arve ja sümboleid -$:/.+ABCD Variable number of digits Varieeruv arv arve Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Varieeruv arv arve. ITF-14 koosneb 14 arvust ega sisalda kontrollarvu Variable number of digits and capital letters Varieeruv arv arve ja suurtähti Variable number of hexadecimal characters Varieeruv arv kuueteistkümnendsüsteemi märke Error opening file: %1 Viga faili avamisel: %1 Barcode incomplete Ribakood pole täielik For ISBN-10 the data should contain 9 or 10 digits separated appropriately by dash characters. For ISBN-13 the data should contain 12 or 13 digits separated appropriately by dash characters. If the last digit is not given then the ISBN checkdigit is calculated automatically. ISBN-10 korral peavad andmed sisaldama 9 või 10 (tab)(tab)(tab)(tab)(tab)(tab)(tab)(tab)arvu, mida eraldavad kriipsud.(new line) ISBN-13 korral peavad andmed sisaldama 12 või 13 (tab)(tab)(tab)(tab)(tab)(tab)(tab)(tab)arvu, mida eraldavad kriipsud.(new line) Kui viimast arvu ei ole antud, arvutatakse (tab)(tab)(tab)(tab)(tab)(tab)(tab)(tab)ISBN kontrollarv automaatselt. 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type Select Barcode Type BarcodeGeneratorBase Barcode Creator Ribakoodi generaator Barcode Ribakood &Type: &Tüüp: Co&de: Koo&d: Select one of the available barcode type here Vali mõni saadaolevatest ribakoodi tüüpidest The numeric representation of the code itself. See the help message below Kood ise arvuna. Vaata täpsemalt allolevat abiteadet. Reset the barcode samples Lähtesta ribakoodi näited &Include text in barcode Tekst&i kaasamine ribakoodi Alt+I Alt+I If checked, there will be numbers in the barcode too Märkimise korral võib ribakoodis olla ka tähti &Guard whitespace Tühimär&gi kaitse Alt+G Alt+G Draw arrows to be sure of space next the code Noolte joonistamine koodi järel tühiku tagamiseks I&nclude checksum Ko&ntrollsumma kaasamine Alt+N Alt+N Generate and include a checksum in barcode Kontrollsumma genereerimine ja kaasamine ribakoodi Incl&ude checksum digit Kontrolls&umma arvu kaasamine Alt+U Alt+U Include the checksum digit in the barcode text Kontrollsumma arvu lisamine ribakoodi teksti Colors Värvid &Background &Taust Alt+B Alt+B Background color - under the code lines Taustavärv ribade taga &Lines &Ribad Alt+L Alt+L Color of the lines in barcode Ribakoodi ribade värv &Text &Tekst Alt+T Alt+T Color of the text and numbers Teksti ja arvude värv Hints and help is shown here Siin näeb vihjeid ja abi Preview of the result. 72dpi sample. Tulemuse eelvaatlus. 72dpi näide. Insert Barcode Format Vorming Biblio Choose a Scrapbook Directory Visandimapi kataloogi valik Scrapbook (*.scs) Visandimapp (*.scs) Choose a scrapbook file to import Imporditava visandimapifaili valik Choose a Directory Kataloogi valik Rename Nimeta ümber Delete Kustuta Name "%1" is not unique. Please choose another. Nimi "%1" ei ole unikaalne. Palun vali mõni muu nimi. Object Objekt &Name: &Nimi: New Entry Uus kirje Scrapbook Visandimapp Create a new scrapbook page Loo uus visandimapi lehekülg Load an existing scrapbook Ava olemasolev visandimapp Save the selected scrapbook Salvesta valitud visandimapp Import an scrapbook file from Scribus <=1.3.2 Impordi visandimapifail Scribuse versioonist <=1.3.2 Close the selected scrapbook Sulge valitud visandimapp Copy To: Kopeerimine: Move To: Liigutamine: Main Peamine Copied Items Kopeeritud elemendid New Name Scrapbook (*.scs *.SCS) Paste to Page Save as... Close Sulge Delete Contents Do you really want to delete all entries? BookMView Move Bookmark Liiguta järjehoidjat Insert Bookmark Lisa järjehoidja Cancel Loobu Bookmarks Järjehoidjad BookPalette Bookmarks Järjehoidjad ButtonIcon Icon Placement Ikooni paigutus Layout: Välimus: Caption only Ainult pealdis Icon only Ainult ikoon Caption below Icon Pealdis ikooni all Caption above Icon Pealdis ikooni kohal Caption right to Icon Pealdis ikoonist paremal Caption left to Icon Pealdis ikoonist vasakul Caption overlays Icon Pealdis ikooni peal Scale: Skaleerimine: Always Alati When Icon is too small Kui ikoon on liiga väike When Icon is too big Kui ikoon on liiga suur Never Mitte kunagi Scale How: Skaleerimine viis: Proportional Proportsionaalne Non Proportional Mitteproportsionaalne Icon Ikoon OK OK Cancel Loobu Reset Lähtesta CMSPrefs &Activate Color Management Värvih&alduse lubamine System Profiles Süsteemsed profiilid &RGB Pictures: &RGB pildid: &CMYK Pictures: &CMYK pildid: &RGB Solid Colors: &RGB ühtlased värvid: &CMYK Solid Colors: &CMYK ühtlased värvid: &Monitor: &Monitor: P&rinter: P&rinter: Rendering Intents Renderdamisviisid Perceptual Pertseptuaalne Relative Colorimetric Suhteline kolorimeetriline Saturation Küllastus Absolute Colorimetric Absoluutne kolorimeetriline Pictures: Pildid: Sol&id Colors: Ühtlased värv&id: Sim&ulate Printer on the Screen Printeri sim&uleerimine ekraanil Convert all colors to printer space Kõigi värvide teisendamine printeriruumi Mark Colors out of &Gamut Värviulatusest väl&jajäävate värvide märkimine Use &Blackpoint Compensation Must&punkti kompenseerimine Default color profile for imported CMYK images Imporditud CMYK piltide vaikimisi värviprofiil Default color profile for imported RGB images Imporditud RGB piltide vaikimisi värviprofiil Default color profile for solid RGB colors on the page Ühtlaste RGB värvide vaikimisi värviprofiil leheküljel Default color profile for solid CMYK colors on the page Ühtlaste CMYK värvide vaikimisi värviprofiil leheküljel Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Värviprofiil, mille oled genereerinud või saanud tootjalt. See profiil peab vastama monitorile ega tohi olla üldine profiil (s.t. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Printeri tootjapoolne värviprofiil. See profiil peab vastama printerile ega tohi olla üldine profiil (s.t. sRGB). Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Ühtlaste värvide vaikimisi renderdamisviis. Kui sa ei tea, kuidas seda muuta, tuleks valida suhteline kolorimeetriline või pertseptuaalne. Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Piltide vaikimisi renderdamisviis. Kui sa ei tea, kuidas seda muuta, tuleks valida suhteline kolorimeetriline või pertseptuaalne. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Niinimetatud väljundvaate lubamine, mis näitab printeri profiili alusel, millised näevad dokumendi värvid välja trükkimisel. Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Täieliku värvihaldusega keskkonna simuleerimine: kõik värvid, nii RGB kui CMYK, teisendatakse printeri värviruumi. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Ekraanil näidatakse värve, mida ei pruugi olla võimalik korralikult trükkida. See nõuab väga täpseid profiile ja on mõeldud lihtsalt hoiatuseks. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Mustpunkti kompenseerimisega saab parandada fotode kontrasti. Kui dokumendis leidub fotosid, on soovitatav see valik sisse lülitada. Images: Pildid: CMSPrefsBase Form &Activate Color Management Värvih&alduse lubamine System Profiles Süsteemsed profiilid &RGB Images: Default color profile for imported RGB images Imporditud RGB piltide vaikimisi värviprofiil &CMYK Images: Default color profile for imported CMYK images Imporditud CMYK piltide vaikimisi värviprofiil &RGB Solid Colors: &RGB ühtlased värvid: Default color profile for solid RGB colors on the page Ühtlaste RGB värvide vaikimisi värviprofiil leheküljel &CMYK Solid Colors: &CMYK ühtlased värvid: Default color profile for solid CMYK colors on the page Ühtlaste CMYK värvide vaikimisi värviprofiil leheküljel &Monitor: &Monitor: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Värviprofiil, mille oled genereerinud või saanud tootjalt. See profiil peab vastama monitorile ega tohi olla üldine profiil (s.t. sRGB). P&rinter: P&rinter: Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Printeri tootjapoolne värviprofiil. See profiil peab vastama printerile ega tohi olla üldine profiil (s.t. sRGB). Rendering Intents Renderdamisviisid Images: Pildid: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Piltide vaikimisi renderdamisviis. Kui sa ei tea, kuidas seda muuta, tuleks valida suhteline kolorimeetriline või pertseptuaalne. Sol&id Colors: Ühtlased värv&id: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Ühtlaste värvide vaikimisi renderdamisviis. Kui sa ei tea, kuidas seda muuta, tuleks valida suhteline kolorimeetriline või pertseptuaalne. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Niinimetatud väljundvaate lubamine, mis näitab printeri profiili alusel, millised näevad dokumendi värvid välja trükkimisel. Sim&ulate Printer on the Screen Printeri sim&uleerimine ekraanil Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Täieliku värvihaldusega keskkonna simuleerimine: kõik värvid, nii RGB kui CMYK, teisendatakse printeri värviruumi. Convert all colors to printer space Kõigi värvide teisendamine printeriruumi Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Ekraanil näidatakse värve, mida ei pruugi olla võimalik korralikult trükkida. See nõuab väga täpseid profiile ja on mõeldud lihtsalt hoiatuseks. Mark Colors out of &Gamut Värviulatusest väl&jajäävate värvide märkimine Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Mustpunkti kompenseerimisega saab parandada fotode kontrasti. Kui dokumendis leidub fotosid, on soovitatav see valik sisse lülitada. Use &Blackpoint Compensation Must&punkti kompenseerimine CMYKChoose Edit Color Värvi muutmine &Name: &Nimi: Color &Model Värvi&mudel CMYK CMYK RGB RGB Web Safe RGB Web Safe RGB Is Spot Color Spot-värv Is Registration Color Kokkutrükivärv New Uus Old Vana HSV-Colormap HSV-värvikaart C: C: % % M: M: Y: Y: K: K: Dynamic Color Bars Dünaamilised värviribad Static Color Bars Staatilised värviribad R: R: G: G: B: B: You cannot create a color named "%1". It is a reserved name for transparent color Värvi nimega "%1" ei saa luua. See nimi on reserveeritud läbipaistvale värvile. Name of the color is not unique Värvi nimi ei ole unikaalne Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself. Selle valimine võimaldab trükkimise kõigil plaatidel. Kokkutrükivärve kasutatakse enamasti selliste printeritähiste jaoks, nagu kärpimisääred, registreerimismärgid ja nii edasi. Tavaliselt ei kasutata neid küljenduses endas. If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. Kui värvihaldus on lubatud, hoiatab kolmnurkne märk värvi ees, et see võib jääda parajasti valitud printeriprofiili värviulatusest välja. See tähendab, et trükkimisel ei pruugi värv olla täpselt selline, nagu seda näeb ekraanil. Lähemalt räägib värviulatuse hoiatustest käsiraamat värvihalduse osas. The name of the color already exists, please choose another one. Selle nimega värv on juba olemas, palun vali mõni muu nimi. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. Selle valimisel muudetakse värv spot-värviks, luues plaatide või separeerimise jaoks täiendava värvi. Enamasti on seda mõtet kasutada siis, kui logo või mõned muud värvid peavad olema äärmiselt täpsed või neid ei saa tekitada CMYK-i abil. Heaks näiteks on metallik- ja fluorestsensvärv, mida CMYK-iga on raske saavutada. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CStyleP Form1 Vorm1 Colors Värvid CStylePBase Form1 Vorm1 Parent Eellane CWDialog Normal Vision Tavaline nägemine Protanopia (Red) Protanoopia (punane) Deuteranopia (Green) Deuteranoopia (roheline) Tritanopia (Blue) Tritanoopia (sinine) Full Color Blindness Täielik värvipimedus Merging colors Värvide ühendamine Error: Viga: Color %1 exists already! Värv %1 on juba olemas! Color %1 appended. Värv %1 lisatud. Now opening the color manager. Avatakse värvihaldur. Color Merging Värvide ühendamine Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Soovitud värvi ei leitud. Arvatavasti valisid musta, halli või valge. Seda värvi pole võimalik töödelda. Color Wheel Värviratas Click the wheel to get the base color. Its color model depends on the chosen tab. Klõpsa rattal baasvärvi valimiseks. Selle värvimudel sõltub valitud meetodist. Result Colors CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Valitud värviskeemi värvid. Color Scheme Method Angle: Nurk: Difference between the selected value and the counted ones. Refer to documentation for more information. Erinevus valitud ja arvutatud väärtuse vahel. Lähemalt räägib sellest dokumentatsioon. Select one of the methods to create a color scheme. Refer to documentation for more information. Vali värviskeemi loomiseks mõni meetod. Lähemalt räägib neist dokumentatsioon. Merge created colors into the document colors Loodud värvide ühendamine dokumendi värvidega &Merge Ü&henda Alt+M Alt+M Replace created colors in the document colors Dokumendi värvide asendamine loodud värvidega &Replace &Asenda Alt+R Alt+R Leave colors untouched Värvid jäetakse muutmata &Cancel &Loobu Alt+C Alt+C Preview: Eelvaatlus: Sample color scheme. Näidisvärviskeem. Simulate common vision defects here. Select type of the defect. Levinumate nägemishäirete simuleerimine. Vali vajalik puudetüüp. Vision Defect Type: Nägemishäire tüüp: C: C: % M: M: Y: Y: K: K: RGB: RGB: HSV: R: R: G: G: B: B: CMYK: CMYK: H: H: S: S: V: V: Document Dokument CWDialogBase Color Wheel Värviratas Click the wheel to get the base color. Its color model depends on the chosen tab. Klõpsa rattal baasvärvi valimiseks. Selle värvimudel sõltub valitud meetodist. CMYK CMYK C: C: M: M: Y: Y: K: K: RGB: RGB: RGB RGB R: R: G: G: B: B: CMYK: CMYK: Document Dokument Color Scheme Method: Värviskeemi meetod: Select one of the methods to create a color scheme. Refer to documentation for more information. Vali värviskeemi loomiseks mõni meetod. Lähemalt räägib neist dokumentatsioon. Angle: Nurk: Difference between the selected value and the counted ones. Refer to documentation for more information. Erinevus valitud ja arvutatud väärtuse vahel. Lähemalt räägib sellest dokumentatsioon. Preview: Eelvaatlus: Vision Defect Type: Nägemishäire tüüp: Sample color scheme. Näidisvärviskeem. Colors of your chosen color scheme. Valitud värviskeemi värvid. &Merge Ü&henda Alt+M Alt+M Merge created colors into the document colors Loodud värvide ühendamine dokumendi värvidega &Replace &Asenda Alt+R Alt+R Replace created colors in the document colors Dokumendi värvide asendamine loodud värvidega &Cancel &Loobu Alt+C Alt+C Leave colors untouched Värvid jäetakse muutmata Simulate common vision defects here. Select type of the defect. Levinumate nägemishäirete simuleerimine. Vali vajalik puudetüüp. HSV HSV H: H: S: S: V: V: Canvas X: %1 Y: %2 X: %1 X: %1 Y: %1 Y: %1 Length: %1 Angle: %2 Width: %1 Height: %2 CanvasMode_Normal All Supported Formats Kõik toetatud vormingud Open ChTable You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Hiire paremat klahvi all hoides näeb pisipilti. Klahviga Insert saab glüüfi allolevasse valikukasti lisada, klahviga Delete viimati lisatud glüüfi eemaldada. CharSelect Select Character: Märgi valimine: Font: Font: Character Class: Märgiklass: &Insert Code: L&isatava märgi kood: &Insert L&isa C&lear &Puhasta &Close S&ulge Insert the characters at the cursor in the text Lisab märgid teksti kursori asukohta Delete the current selection(s). Kustutab aktiivse valiku. Close this dialog and return to text editing Sulgeb dialoogi ja naaseb teksti redigeerimise juurde Type in a four digit unicode value directly here Siia saab otse kirjutada Unicode'i neljakohalise arvväärtuse Full Character Set Täielik märgistik Basic Latin Ladina alusosa Latin-1 Supplement Latin-1 täiendosa Latin Extended-A Ladina laiendatud A Latin Extended-B Ladina laiendatud B General Punctuation Üldised kirjavahemärgid Super- and Subscripts Üla- ja alaindeksid Currency Symbols Rahasümbolid Letterlike Symbols Tähelaadsed sümbolid Number Forms Arvuvormid Arrows Nooled Mathematical Operators Matemaatilised märgid Box Drawing Joonekombinatsioonid Block Elements Plokid Geometric Shapes Geomeetrilised kujundid Miscellaneous Symbols Mitmesugused sümbolid Dingbats Piltmärgid Small Form Variants Väikesed märgid Ligatures Ligatuurid Specials Erisümbolid Greek Kreeka Greek Extended Kreeka laiendatud Cyrillic Kirillitsa Cyrillic Supplement Kirillitsa täiendosa Arabic Araabia Arabic Extended A Araabia laiendatud A Arabic Extended B Araabia laiendatud B Hebrew Heebrea You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Hiire paremat klahvi all hoides näeb pisipilti. Klahviga Insert saab glüüfi allolevasse valikukasti lisada, klahviga Delete viimati lisatud glüüfi eemaldada Scribus Char Palette (*.ucp);;All Files (*) Choose a filename to open Error Viga Error reading file %1 - file is corrupted propably. Cannot write file %1 Character Palette &Search Ot&si Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette CharSelectEnhanced Full Character Set Täielik märgistik Basic Latin Ladina alusosa Latin-1 Supplement Latin-1 täiendosa Latin Extended-A Ladina laiendatud A Latin Extended-B Ladina laiendatud B General Punctuation Üldised kirjavahemärgid Super- and Subscripts Üla- ja alaindeksid Currency Symbols Rahasümbolid Letterlike Symbols Tähelaadsed sümbolid Number Forms Arvuvormid Arrows Nooled Mathematical Operators Matemaatilised märgid Box Drawing Joonekombinatsioonid Block Elements Plokid Geometric Shapes Geomeetrilised kujundid Miscellaneous Symbols Mitmesugused sümbolid Dingbats Piltmärgid Small Form Variants Väikesed märgid Ligatures Ligatuurid Specials Erisümbolid Greek Kreeka Greek Extended Kreeka laiendatud Cyrillic Kirillitsa Cyrillic Supplement Kirillitsa täiendosa Arabic Araabia Arabic Extended A Araabia laiendatud A Arabic Extended B Araabia laiendatud B Hebrew Heebrea Enhanced Character Palette &Font: C&haracter Class: You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one Insert &Code: Type in a four digit unicode value directly here Siia saab otse kirjutada Unicode'i neljakohalise arvväärtuse Glyphs to Insert Insert the characters at the cursor in the text Lisab märgid teksti kursori asukohta &Insert Delete the current selection(s). Kustutab aktiivse valiku. C&lear &Puhasta CharStyleComboBox No Style Stiil puudub CharTableView Delete CheckDocument Document Dokument No Problems found Probleeme ei esinenud Page Lehekülg Free Objects Vabad objektid Problems found Esines probleeme Preflight Verifier Trükieelne kontroll Items Elemendid Problems Probleemid Current Profile: Aktiivne profiil: &Ignore Errors &Ignoreeri vigu Check again Kontrolli uuesti Glyphs missing Puuduvad glüüfid Text overflow Teksti ülejooksmine Object is not on a Page Objekt ei paikne leheküljel Missing Image Puuduv pilt Image resolution below %1 DPI, currently %2 x %3 DPI Pildi lahutus on alla %1 DPI, praegu %2 x %3 DPI-d Image resolution above %1 DPI, currently %2 x %3 DPI Pildi lahutus on üle %1 DPI, praegu %2 x %3 DPI-d Object has transparency Objekt on läbipaistev Object is a PDF Annotation or Field Objekt on PDF-i annotatsioon või väli Object is a placed PDF Objekt on põimitud PDF-fail Image is GIF Pilt on GIF OK OK Transparency used Läbipaistvuse kasutamine Blendmode used Ühtesulamise kasutamine Layer "%1" Kiht "%1" Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame ChooseStyles Choose Styles Stiilide valik Available Styles Saadaolevad stiilid CollectForOutput Choose a Directory Kataloogi valik Collecting... Kogumine... Cannot collect the file: %1 Faili ei õnnestunud koguda: %1 Warning Hoiatus Cannot collect all files for output for file: %1 Ei õnnestunud koguda kõigi faile väljundiks failile: %1 ColorManager Colors Värvid &Import &Impordi &New &Uus &Edit &Redigeeri D&uplicate &Klooni &Delete K&ustuta &Remove Unused &Eemalda kasutud Color Sets Värvikomplektid Current Color Set: Aktiivne värvikomplekt: &Save Color Set &Salvesta värvikomplekt Choose a color set to load Vali avatav värvikomplekt Save the current color set Salvesta aktiivne värvikomplekt Remove unused colors from current document's color set Eemalda kasutamata värvid dokumendi aktiivsest värvikomplektist Import colors to the current set from an existing document Impordi olemasolevast dokumendist värvid aktiivsesse värvikomplekti Create a new color within the current set Loo aktiivses värvikomplektis uus värv Edit the currently selected color Redigeeri valitud värvi Make a copy of the currently selected color Kopeeri valitud värv Delete the currently selected color Kustuta valitud värv Make the current colorset the default color set Muuda aktiivne värvikomplekt vaikimisi värvikomplektiks &Name: &Nimi: Choose a Name Nime valik Open Avamine Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumendid (*.sla *.sla.gz *.scd *.scd.gz);;Kõik failid (*) Documents (*.sla *.scd);;All Files (*) Dokumendid (*.sla *.scd);;Kõik failid (*) Copy of %1 %1 koopia New Color Uus värv If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management. Kui värvihaldus on lubatud, hoiatab kolmnurkne märk värvi ees, et see võib jääda parajasti valitud printeriprofiili värviulatusest välja. See tähendab, et trükkimisel ei pruugi värv olla täpselt selline, nagu seda näeb ekraanil. Lähemalt räägib värviulatuse hoiatustest käsiraamat värvihalduse osas. Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.ps *.ai);;All Files (*) Dokumendid (*.sla *.sla.gz *.scd *.scd.gz);;Teised failid (*.eps *.ps *.ai);;Kõik failid (*) Documents (*.sla *.scd);;Other Files (*.eps *.ps *.ai);;All Files (*) Dokumendid (*.sla *.scd);;Teised failid (*.eps *.ps *.ai);;Kõik failid (*) Information Info Import Impordi The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks. All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors ColorWheel Monochromatic Monokromaatiline Analogous Analoogvärvid Complementary Komplementaarvärvid Split Complementary Lõhestatud komplementaarvärvid Triadic Triaad Tetradic (Double Complementary) Nelikõla (topeltkomplementaarsus) Base Color Baasvärv Monochromatic Light Mnonokromaatiline hele Monochromatic Dark Monokromaatiline tume 1st. Analogous 1. analoogvärv 2nd. Analogous 2. analoogvärv 1st. Split 1. lõhestatud värv 2nd. Split 2. lõhestatud värv 3rd. Split 3. lõhestatud värv 4th. Split 4. lõhestatud värv 1st. Triadic 1. triaad 2nd. Triadic 2. triaad 1st. Tetradic (base opposite) 1. tetraad (baasi vastand) 2nd. Tetradic (angle) 2. tetraad (nurk) 3rd. Tetradic (angle opposite) 3. tetraad (nurga vastand) ColorWheelDialog E&xit &Välju C&olor &Värv Color Wheel Värviratas Color Värv Name Nimi C C M M Y Y K K Error: Viga: Color %1 exists already! Värv %1 on juba olemas! Color %1 appended. Värv %1 lisatud. New Color Uus värv ColorWheelPlugin &Color Wheel... &Värviratas... Color setting helper Värviseadistuste abiline Color selector with color theory included. Värvivalija, mis arvestab värviteooriat. CommonStrings &Apply &Rakenda &Cancel &Loobu None color name Puudub &OK &OK &Save &Salvesta Warning Hoiatus Custom CommonStrings, custom page size Kohandatud Single Page Üks lehekülg Double Sided Kaks lehekülge 3-Fold Kolm lehekülge 4-Fold 4 lehekülge Left Page Vasakpoolne Middle Keskmine Middle Left Vasak keskmine Middle Right Parem keskmine Right Page Parempoolne Monday Esmaspäev Tuesday Teisipäev Wednesday Kolmapäev Thursday Neljapäev Friday Reede Saturday Laupäev Sunday Pühapäev January Jaanuar February Veebruar March Märts April Aprill May Mai June Juuni July Juuli August August September September October Oktoober November November December Detsember Yes Jah No Ei &Yes &Jah &No &Ei Normal Normaalne Normal Left Normaalne vasakul Normal Middle Normaalne keskel Normal Right Normaalne paremal Left Page Left page location Vasakpoolne Middle Middle page location Keskmine Middle Left Middle Left page location Vasak keskmine Middle Right Middle Right page location Parem keskmine Right Page Right page location Parempoolne Normal Default single master page Normaalne Normal Left Default left master page Normaalne vasakul Normal Middle Default middle master page Normaalne keskel Normal Right Default right master page Normaalne paremal Normal Vision Color Blindness - Normal Vision Tavaline nägemine Protanopia (Red) Color Blindness - Red Color Blind Protanoopia (punane) Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranoopia (roheline) Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanoopia (sinine) Full Color Blindness Color Blindness - Full Color Blindness Täielik värvipimedus Custom: Custom Tab Fill Option Kohandatud: None Puudub Solid Line Ühtlane joon Dashed Line Punktiirjoon Dotted Line Punktjoon Dash Dot Line Kriipspunktjoon Dash Dot Dot Line Kriipspunktpunktjoon None Optical Margin Setting Puudub Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Halltoonid Duotone Colorspace Duotone Unknown Colorspace (Unknown) Teadmata PostScript PostScript Text Frame Tekstikast Image Frame Line Joon Polygon Hulknurk Polyline Kompleksjoon Text on a Path Trajektoori tekst Multiple Multiple frame types PDF Push Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation PostScript Level 1 PostScript tase 1 PostScript Level 2 PostScript tase 2 PostScript Level 3 PostScript tase 3 Windows GDI Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings Eelvaatluse seadistused Paste File... Delete Page Paste Image from Clipboard CopyPageToMasterPageBase Convert Page to Master Page Lehekülje salvestamine toorikuna Name: Nimi: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Uus leheküljetoorik %1 Cpalette pt pt % % Shade: Varjund: Opacity: Läbipaistmatus: X1: X1: Y1: Y1: X2: X2: Y2: Y2: Move Vector Liiguta vektorit Normal Normaalne Horizontal Gradient Rõhtne üleminek Vertical Gradient Püstine üleminek Diagonal Gradient Diagonaalne üleminek Cross Diagonal Gradient Ristdiagonaalne üleminek Radial Gradient Radiaalne üleminek Free linear Gradient Vaba lineaarne üleminek Free radial Gradient Vaba radiaalne üleminek Edit Line Color Properties Muuda joonevärvi omadusi Edit Fill Color Properties Muuda täitevärvi omadusi Saturation of color Värviküllastus Normal or gradient fill method Normaalne või ülemineku täitmise meetod Set the transparency for the color selected Määra valitud värvi läbipaistvus Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Liiguta üleminekuvektori algust hiire vasakut nuppu ja üleminekuvektori lõppu hiire paremat nuppu all hoides Transparency Settings Läbipaistvuse seadistused Blend Mode: Ühtesulamise režiim: Darken Tumendamine Lighten Helendamine Multiply Korrutamine Screen Ekraan Overlay Ülekatmine Hard Light Külm valgus Soft Light Soe valgus Difference Lahutamine Exlusion Väljajätmine Color Dodge Värvi helestamine Color Burn Värvi tumestamine Hue Toon Saturation Küllastus Color Värv Luminosity Valgsus Offsets Nihe X: X: Y: Y: Scaling Skaleerimine Rotation Pööramine Angle Nurk Pattern Muster Exclusion VäljajätmineVäljajätmine X-Scale: X-skaala: Y-Scale: Y-skaala: Display only used Colors Display all colors from the document color list, or only the already used colors CreateRange Create Range Vahemiku loomine Number of Pages in Document: Lehekülgede arv dokumendis: Doc Page Range Dokumendi lehekülgede vahemik Basic Range Selection Vahemiku valimine Range of Pages Lehekülgede vahemik De&lete &Kustuta Alt+L Alt+L Move &Down L&iiguta alla Alt+D Alt+D Move &Up &Liiguta üles Alt+U Alt+U Add a Range of Pages Lisa lehekülgede vahemik Consecutive Pages Järjestikused lehed Even Pages Paarisleheküljed From: Alates: To: &Add To Range Lis&a vahemikku Alt+A Alt+A Odd Pages Paaritud leheküljed Comma Separated List Komadega eraldatud loend Advanced Reordering Täpsem ümberkorraldamine Page Order Lehekülgede järjekord Sample Page Order: Lehekülgede näidisjärjekord: Page Group Size: Leheküljerühma suurus: &OK &OK Alt+O Alt+O &Cancel &Loobu Alt+C Alt+C CreateRangeBase Create Range Vahemiku loomine Number of Pages in Document: Lehekülgede arv dokumendis: Doc Page Range Dokumendi lehekülgede vahemik Basic Range Selection Vahemiku valimine Add a Range of Pages Lisa lehekülgede vahemik Consecutive Pages Järjestikused lehed From: Alates: To: Kuni: Comma Separated List Komadega eraldatud loend Even Pages Paarisleheküljed Odd Pages Paaritud leheküljed &Add To Range Lis&a vahemikku Alt+A Alt+A Range of Pages Lehekülgede vahemik Move &Up &Liiguta üles Alt+U Alt+U Move &Down L&iiguta alla Alt+D Alt+D De&lete &Kustuta Alt+L Alt+L Advanced Reordering Täpsem ümberkorraldamine Page Group Size: Leheküljerühma suurus: Sample Page Order: Lehekülgede näidisjärjekord: Page Order Lehekülgede järjekord &OK &OK Alt+O Alt+O &Cancel &Loobu Alt+C Alt+C CsvDialog CSV Importer Options CSV importija valikud Field delimiter: Väljade eraldaja: (TAB) (TAB) Value delimiter: Väärtuste eraldaja: None delimiter Puudub First row is a header Esimene rida on päis OK OK Cancel Loobu CupsOptions Printer Options Printeri valikud Page Set Lehekülgede valim All Pages Kõik leheküljed Even Pages only Ainult paarisleheküljed Odd Pages only Ainult paaritud leheküljed Mirror Peegeldamine No Ei Yes Jah Orientation Orientatsioon Portrait Püstpaigutus Landscape Rõhtpaigutus N-Up Printing Lehekülgi lehele Page per Sheet lehekülg lehe kohta Pages per Sheet lehekülge lehe kohta Option Valik Value Väärtus This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * See dialoog näitab trükkimisel kasutatavaid CUPS-i valikuid. Täpsed parameetrid sõltuvad printeri draiverist. CUPS-i toetust saab kontrollida dialoogis Abi -> Info. Seal tuleb otsida kirjet C-C-T, milles C=CUPS, teine C=littlecms ja T=TIFF. Puuduva toetuse korral seisab vastava teegi asemel *. CurveWidget Open Avamine Curve Files (*.scu);;All Files (*) Trajektoorifailid (*.scu);;Kõik failid (*) Save as Salvestamine Cannot write the file: %1 Ei õnnestunud kirjutada faili: %1 Inverts the curve Inverteerib trajektoori Resets the curve Lähtestab trajektoori Switches between linear and cubic interpolation of the curve Lülitab trajektoori lineaarse ja kolmanda astme intepolatsiooni vahel Loads a curve Laadib trajektoori Saves this curve Salvestab trajektoori CustomFDialog &Compress File &Faili tihendamine &Include Fonts Fo&ntide kaasamine Encoding: Kodeering: Moves to your Document Directory. This can be set in the Preferences. Liigub määratud dokumentide kataloogi. Selle saab määrata seadistustes. &Include ICC Profiles &ICC profiilide kaasamine Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CwSetColor CMYK CMYK RGB RGB HSV HSV H: H: S: S: V: V: R: R: G: G: B: B: C: C: M: M: Y: Y: K: K: DashEditor Value: Väärtus: Offset: DeferredTask Cancelled by user Kasutaja katkestas toimingu DelColor Delete Color Värvi kustutamine Delete Color: Kustutatav värv: Replace With: Asendus: DelPages Delete Pages Lehekülgede kustutamine Delete From: Kustutatakse alates: to: kuni: DelStyle Delete Style Stiili kustutamine Delete Style: Kustutatav stiil: Replace With: Asendus: No Style Stiil puudub DocIm Importing failed Import ebaõnnestus Importing Word document failed %1 Word'i dokumendi import ebaõnnestus %1 DocInfos Document Information Dokumendi info &Title: &Pealkiri: &Author: A&utor: &Keywords: &Võtmesõnad: Descri&ption: &Kirjeldus: P&ublisher: &Avaldaja: &Contributors: &Kaasautorid: Dat&e: Kuupä&ev: T&ype: &Tüüp: F&ormat: &Vorming: Identi&fier: I&dentifikaator: &Source: All&ikas: &Language: &Keel: &Relation: &Seos: Co&verage: &Hõlmamine: Ri&ghts: Õi&gused: Documen&t &Dokument Further &Information Täiendav &info The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Isik või organisatsioon, kes vastutab dokumendi sisu eest tervikuna. Selle välja saab info huvides põimida nii Scribuse dokumenti kui ka PDF-i metaandmetesse. A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Dokumendi nimi. Selle välja saab info huvides põimida nii Scribuse dokumenti kui ka PDF-i metaandmetesse. An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export Dokumendi sisu ülevaade. See väli sisaldab dokumendi lühikirjeldust või kokkuvõtet. See põimitakse eksportimisel PDF-i. The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files Dokumendi sisu teema. See väli on mõeldud PDF-i põimitavate dokumendi võtmesõnade jaoks, mis aitavad PDF-failides otsida ja neid indekseerida. A person or organisation responsible for making the document available Isik või organisatsioon, kes vastutab dokumendi avaldamise eest A person or organisation responsible for making contributions to the content of the document Isik või organisatsioon, kes on andnud panuse dokumendi sisu loomisse A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 Dokumendi loomisega seotud kuupäev vormingus YYYY-MM-DD (vastavalt ISO 8601 nõuetele) The nature or genre of the content of the document, eg. categories, functions, genres, etc Dokumendi sisu iseloom või žanr, nt. kategooria, funktsioon, žanr vms The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here Dokumendi füüsiline või digitaalne kuju. Mainida tasuks nii andmekandja tüüpi kui ka mõõtmeid. Siin saab ära kasutada MIME tüüpide jaoks mõeldud RFC2045 ja RFC2046. An unambiguous reference to the document within a given context such as ISBN or URI Üheselt mõistetav viide dokumendile kindlas kontekstis, n. ISBN või URI A reference to a document from which the present document is derived, eg. ISBN or URI Viide dokumendile, millest aktiivne dokument on tuletatud, nt. ISBN või URI The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH Keel, milles on kirja pandud dokumendi sisu. Tavaliselt keelekood (ISO-639 järgi), millele võib lisanduda sidekriips ja riigikood (ISO-3166 järgi), nt. et, en-GB, fr-CH. A reference to a related document, possibly using a formal identifier such as a ISBN or URI Viide seotud dokumendile, võib olla formaalne identifikaator, nt. ISBN või URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Dokumendi sisu haare või ulatus, võib sisaldada asukohta, aega, jurisdiktsiooni Information about rights held in and over the document, eg. copyright, patent or trademark Info dokumendiga seotud õiguste kohta, nt. autoriõigus, patent, kaubamärk DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Lisa dokumendile lehekülgede nummerdamise sektsioon. Uus sektsioon lisatakse valitud sektsiooni järele. Delete the currently selected section. Kustuta valitud sektsioon <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. <b>Nimi:</b> sektsiooni nimi, nt Indeks; võib ka ära jääda<br/><b>Näitamine:</b> märkimise korral näidatakse sektsioonis leheküljenumbreid, kui seda vajab üks või enam tekstikasti.<br/><b>Alates:</b> lehekülg, millest antud sektsiooni indeks algab.<br/><b>Kuni:</b> lehekülg, milleni antud sektsiooni indeks ulatub.<br/><b>Stiil:</b> kasutatav leheküljenumbri stiil.<br/><b>Algus:</b> indeks stiili vahemikus, millest alustatakse. Kui nt. Algus=2 ja Stiil=a,b,c, ..., algavad numbrid b-ga. Dokumendi esimese sektsiooni korral asendab see senise esimese lehekülje numbri uues failiaknas. 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... Page Number Out Of Bounds Leheküljenumber väljub piiridest The value you have entered is outside the range of page numbers in the current document (%1-%2). Sisestatud väärtus väljub aktiivse dokumendi leheküljenumbrite vahemikust (%1-%2). Document Sections Dokumendi sektsioonid &Add Lis&a Alt+A Alt+A &Delete K&ustuta Alt+D Alt+D Name Nimi Shown Näitamine From Alates To Kuni Style Stiil Start Algus DocSectionsBase Document Sections Dokumendi sektsioonid Name Nimi Shown Näitamine From Alates To Kuni Style Stiil Start Algus &Add Lis&a Alt+A Alt+A &Delete K&ustuta Alt+D Alt+D DocumentItemAttributes None relationship Puudub Relates To On seotud elemendiga Is Parent Of On eellane elemendile Is Child Of On järglane elemendile None auto add Puudub Text Frames Tekstikastid Image Frames Pildikastid None types Puudub Boolean Tõeväärtus Integer Täisarv Real Number Reaalarv String String Document Item Attributes Dokumendi elemendi atribuudid &Add Lis&a Alt+A Alt+A &Copy &Kopeeri Alt+C Alt+C &Delete K&ustuta Alt+D Alt+D C&lear &Puhasta Alt+L Alt+L Name Nimi Type Tüüp Value Väärtus Parameter Parameeter Relationship Seos Relationship To Seos elemendiga Auto Add To Automaane lisamine elemendile DocumentItemAttributesBase Document Item Attributes Dokumendi elemendi atribuudid Name Nimi Type Tüüp Value Väärtus Parameter Parameeter Relationship Seos Relationship To Seos elemendiga Auto Add To Automaane lisamine elemendile &Add Lis&a Alt+A Alt+A &Copy &Kopeeri Alt+C Alt+C &Delete K&ustuta Alt+D Alt+D C&lear &Puhasta Alt+L Alt+L EPSPlug Importing PostScript PostScripti import Analyzing PostScript: PostScripti analüüsimine: Importing File: %1 failed! Faili: %1 import ebaõnnestus! Fatal Error Saatuslik viga Generating Items Elementide genereerimine Converting of %1 images failed! %1 pildi teisendamine ebaõnnestus! Error Viga Group%1 Grupp%1 Importing: %1 EditStyle Edit Style Stiili redigeerimine &Name: &Nimi: Character Märk pt pt % % Distances Vahemaad Fixed Linespacing Fikseeritud reavahe Automatic Linespacing Automaatne reavahe Align to Baseline Grid Joondamine alusjoontele Drop Caps Süvisinitsiaalid &Lines: &Ridu: Distance from Text: Kaugus tekstist: Tabulators and Indentation Tabeldusmärgid ja taandus Preview of the Paragraph Style Lõigustiili eelvaatlus Background Taust Select for easier reading of light coloured text styles Vali heleda tekstistiili paremaks nägemiseks Name of your paragraph style Lõigustiili nimi Font of selected text or object Valitud teksti või objekti font Font Size Fondi suurus Color of text fill Teksti täidise värv Color of text stroke Teksti äärejoone värv Determines the overall height, in line numbers, of the Drop Caps Määrab ridades süvisinitsiaalide kogukõrguse Determines the gap between the DropCaps and the Text Määrab vahe süvisinitsiaali ja teksti vahel Spacing above the paragraph Vahe enne lõiku Spacing below the paragraph Vahe pärast lõiku Manual Tracking Märkide koondamine Offset to baseline of characters Nihe märkide alusjoone suhtes Line Spacing Reavahe Click to select the line spacing mode Klõpsa reavahe režiimi valimiseks Toggles sample text of this paragraph style Näitab näidisteksti antud lõigustiiliga Name of the style is not unique Stiili nimi pole unikaalne Auto Automaatne EditToolBar Edit Redigeerimine Editor Editor Redaktor &New &Uus &Open... &Ava... Save &As... Salvesta &kui... &Save and Exit &Salvesta ja välju &Exit without Saving &Välju salvestamata &Undo &Võta tagasi &Redo &Tee uuesti Cu&t &Lõika &Copy &Kopeeri &Paste &Aseta C&lear &Puhasta &Get Field Names &Hangi väljanimed &File &Fail &Edit &Redigeerimine JavaScripts (*.js);;All Files (*) JavaScriptid (*.js);;Kõik failid (*) Ctrl+N Ctrl+Z Ctrl+X Ctrl+C Ctrl-V EffectsDialog Image Effects Pildiefektid Options: Valikud: Color: Värv: Shade: Varjund: Brightness: Heledus: Contrast: Kontrast: Radius: Raadius: Value: Väärtus: Posterize: Poster: Available Effects Saadaolevad efektid Blur Pehmendamine Brightness Heledus Colorize Toonimine Contrast Kontrast Grayscale Halltoonid Invert Inverteerimine Posterize Poster Sharpen Teravustamine >> >> << << Effects in use Kasutatavad efektid OK OK Cancel Loobu Color 1: Värv 1: Color 2: Värv 2: Color 3: Värv 3: Color 4: Värv 4: Duotone Duotone Tritone Tritone Quadtone Quadtone Curves Trajektoorid ExportBitmap File exists. Overwrite? Fail on olemas. Kas kirjutada üle? exists already. Overwrite? on juba olemas. Kas kirjutada üle? All Kõik Save as Image Salvestamine pildina Insufficient memory for this image size. Error writing the output file(s). Viga väljundfaili kirjutamisel. ExportForm Choose a Export Directory Ekspordikataloogi valik Export as Image(s) Eksport piltidena &Export to Directory: &Ekspordikataloog: C&hange... &Muuda... Options Valikud Image &Type: Pildi &tüüp: &Quality: &Kvaliteet: &Resolution: &Lahutus: &Size: &Suurus: % % dpi dpi Range Vahemik &Current page &Aktiivne lehekülg &All pages &Kõik leheküljed &Range &Vahemik C C Image size in Pixels Pildi suurus pikslites Export a range of pages Lehekülgede vahemiku eksport Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Sisesta komadega eradatud arvud või märgid: * tähistab kõiki lehekülgi, 1-5 lehekülgede vahemikku, konkreetsed leheküljenumbrid vastavaid lehekülgi. Export all pages Kõigi lehekülgede eksport Export only the current page Ainult aktiivse lehekülje eksport Resolution of the Images Use 72 dpi for Images intended for the Screen Piltide lahutus Ekraanile mõeldud piltide korral võiks see olla 72 dpi Size of the images. 100% for no changes, 200% for two times larger etc. Piltide suurus. 100% tähendab muudatusteta, 200% kaks korda suuremat jne. The quality of your images - 100% is the best, 1% the lowest quality Piltide kvaliteet. 100% on parim, 1% halvim kvaliteet Available export formats Saadaolevad ekspordivormingud The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Väljundkataloog, kuhu pildid salvestatakse. Eksportfaili nimeks saab 'dokumendinimi-leheküljenumber.failitüüp'. Change the output directory Muuda väljundkataloogi TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Automaatne ExtImageProps Extended Image Properties Laiendatud pildi omadused Normal Normaalne Darken Tumendamine Lighten Helendamine Hue Toon Saturation KüllastusKüllastus Color VärvVärv Luminosity Valgsus Multiply Korrutamine Screen Ekraan Dissolve Hägunemine Overlay Ülekatmine Hard Light Külm valgus Soft Light Soe valgus Difference Lahutamine Exclusion Väljajätmine Color Dodge Värvi helestamine Color Burn Värvi tumestamine Exlusion Väljajätmine Blend Mode: Ühtesulamise režiim: Opacity: Läbipaistmatus: % % Name Nimi Background Taust Layers Kihid Don't use any Path Trajektoore ei kasutata Paths Trajektoorid Live Preview FDialogPreview Size: Suurus: Resolution: Lahutus: DPI DPI Unknown Teadmata RGB RGB CMYK CMYK Grayscale Halltoonid Colorspace: Värviruum: Title: Pealkiri: No Title Pealkiri puudub Author: Autor: Scribus Document Scribuse dokument Duotone Duotone File Format: FileLoader Some fonts used by this document have been substituted: Mõned selles dokumendis kasutatavad fondid on asendatud: was replaced by: asendati fondiga: FileToolBar File Fail FontComboH Face: Style: Stiil: FontListModel Font Name Fondi nimi Use Font Kasutusel Family Style Stiil Variant Type Tüüp Format Vorming Embed in PostScript Põimimine PostScripti Subset Alamhulk Access Õigused Used in Doc Path to Font File Fondifaili asukoht Unknown font type Teadmata Unknown font format Teadmata User font preview Kasutaja System font preview Süsteem Click to change the value FontPrefs Available Fonts Saadaolevad fondid Font Substitutions Fondiasendused Additional Paths Lisaasukohad Font Name font preview Fondi nimi Use Font font preview Kasutusel Embed in: font preview Põimimine: Subset font preview Alamhulk Path to Font File font preview Fondifaili asukoht PostScript PostScript &Available Fonts &Saadaolevad fondid Font Name Fondi nimi Replacement Asendus &Delete K&ustuta Font &Substitutions &Fondiasendused C&hange... &Muuda... A&dd... Lis&a... &Remove &Eemalda Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit->Settings to change the font search path. Fontide asukohad saab määrata ainult seadistustes ja ainult siis, kui ükski dokument pole avatud. Sulge kõik avatud dokumendid ning muuda siis fontide asukohta menüükäsuga Redigeerimine->Seadistused. Additional &Paths Lis&aasukohad Choose a Directory Kataloogi valik Embed in PostScript font preview Põimimine PostScripti Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. Use Font Kasutusel Embed in PostScript Põimimine PostScripti Subset Alamhulk Path to Font File Fondifaili asukoht FontPreview Woven silk pyjamas exchanged for blue quartz font preview Põdur Zagrebi tšellomängija-följetonist Ciqo külmetas kehvas garaažis Append selected font into Style, Font menu font preview Lisa valitud font stiili- ja fondimenüüsse Leave preview font preview Sulge eelvaatlus Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name. Siin saab kiiresti vajaliku fondi leida. Otsing on tõstutundetu. Otsingus võib kasutada metamärke (*, ?, [...]). Näide: t* leiab kõik fondid, mille alguses seisab t või T. *bold* leiab kõik fondid, mille nimes esineb sõna bold, bolder vms. Start searching Alusta otsimist Size of the selected font Valitud fondi suurus Sample will be shown after key release Näidet näeb pärast klahvi vabastamist User font preview Kasutaja System font preview Süsteem Font Name Fondi nimi Doc Dok Type Tüüp Subset Alamhulk Access Õigused Fonts Preview Fontide eelvaatlus &Quick Search: &Kiirotsing: &Search Ot&si Alt+S Alt+S &Font Size: &Fondi suurus: Text Tekst Sample text to display Näitetekst Se&t &Määra Alt+T Alt+T Reset the text Lähtesta tekst &Append Lis&a Alt+A Alt+A &Close S&ulge Alt+C Alt+C Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default Show Extended Font Information Set the preview text FontPreviewBase Fonts Preview Fontide eelvaatlus &Quick Search: &Kiirotsing: &Search Ot&si Alt+S Alt+S Font Name Fondi nimi Doc Dok Type Tüüp Subset Alamhulk Access Õigused &Font Size: &Fondi suurus: Text Tekst Sample text to display Näitetekst Se&t &Määra Alt+T Alt+T Reset the text Lähtesta tekst &Append Lis&a Alt+A Alt+A &Close S&ulge Alt+C Alt+C FontPreviewPlugin &Font Preview... &Fontide eelvaatlus... Font Preview dialog Fontide eelvaatluse dialoog Sorting, searching and browsing available fonts. Saadaolevate fontide sortimine, otsimine ja sirvimine. FontReplaceDialog Font Substitution Fondiasendus This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Dokument sisaldab fonte, mida pole sinu süsteemi paigaldatut. Palun vali neile sobiv asendus. Loobumisel dokumenti ei avata. Original Font Originaalfont Substitution Font Asendusfont Make these substitutions permanent Alati kasutatakse määratud asendusi Cancels these font substitutions and stops loading the document. Katkestab fontide asendamise ja dokumendi avamise Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. Sisselülitamisel kasutab Scribus määratud asendusi puuduvate fontide jaoks ka edaspidi. Seda saab tühistada või muuta menüükäsuga Redigeerimine->Seadistused->Fondid. If you select OK, then save, these substitutions are made permanent in the document. Kui valida OK ja siis salvestada, kehtestatakse asendused dokumendis püsivalt. GradientEditor Add, change or remove color stops here Lisa, muuda või eemalda värvimarkereid Position: Asukoht: % % GradientVectorDialog Gradient Vector GuideManager Edit Guide Juhtjoone redigeerimine Enter a position: Asukoht: New Guide Uus juhtjoon &Single Ü&ksik Horizontals Rõhtjooned Guide Juhtjoon &Add Lis&a Alt+A Alt+A D&elete K&ustuta Alt+E Alt+E Verticals Püstjooned A&dd L&isa Alt+D Alt+D De&lete &Kustuta Alt+L Alt+L &Lock Guides &Juhtjoonte lukustamine Appl&y to All Pages &Rakendamine kõigile lehekülgedele Alt+Y Alt+Y &Column/Row &Veerg/rida &Number: &Arv: U&se Gap: &Vahe: Alt+S Alt+S Refer To Sidumine &Page Alt+P Alt+P M&argins V&eerised S&election &Valik Nu&mber: A&rv: Use &Gap: Va&he: Alt+G Alt+G &Misc &Muud Delete all guides from the current page Kõigi juhtjoonte kustutamine aktiivselt lehelt Delete Guides from Current &Page Delete all guides from the current document Kõigi juhtjoonte kustutamine aktiivsest dokumendist Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages GuideManagerBase Manage Guides Juhtjoonte haldamine &Standard &Standard Horizontals Rõhtjooned Guide Juhtjoon Unit Ühik &Add Lis&a Alt+A Alt+A D&elete K&ustuta Alt+E Alt+E Verticals Püstjooned A&dd L&isa Alt+D Alt+D De&lete &Kustuta Alt+L Alt+L &Lock Guides &Juhtjoonte lukustamine Appl&y to All Pages &Rakendamine kõigile lehekülgedele Alt+Y Alt+Y A&utomatic A&utomaatne &Number: &Arv: U&se Gap: &Vahe: Alt+S Alt+S Nu&mber: A&rv: Use &Gap: Va&he: Alt+G Alt+G Refer To Sidumine &Page Le&hekülg Alt+P Alt+P M&argins V&eerised S&election &Valik &Misc &Muud Delete &Page Guides K&ustuta lehekülje juhtjooned Delete all guides from the current page Kõigi juhtjoonte kustutamine aktiivselt lehelt Delete &Document guides Kustuta &dokumendi juhtjooned Delete all guides from the current document Kõigi juhtjoonte kustutamine aktiivsest dokumendist &Single Ü&ksik &Column/Row &Veerg/rida HelpBrowser Contents Sisukord Link Link &Contents &Sisukord &Search Ot&si Relevance Asjakohasus Se&arch O&tsing &New &Uus &Delete K&ustuta De&lete All &Kustuta kõik Book&marks &Järjehoidjad &Print... &Trüki... E&xit &Välju &File &Fail &Find... Ot&si... Find &Next Otsi &järgmine Find &Previous Otsi &eelmine &Edit &Redigeerimine &Add Bookmark Lis&a järjehoidja D&elete All &Kustuta kõik &Bookmarks &Järjehoidjad Scribus Online Help Scribuse abi Searching is case unsensitive Otsimine on tõstutundetu Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Vabandust, käsiraamatut pole! Palun otsi saidilt http://docs.scribus.net värsket dokumentatsiooni ja saidilt www.scribus.net allalaadimisvõimalusi. Find Otsimine Search Term: Otsingusõna: New Bookmark Uus järjehoidja New Bookmark's Title: Uue järjehoidja nimi: Scribus Help Searching is case insensitive 1 &Exit &Välju Find &Next... Find &Previous... &Add Lis&a &Quit &Välju <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowser2 &Contents &Sisukord Se&arch O&tsing &Search Ot&si Book&marks &Järjehoidjad HyAsk Possible Hyphenation Võimalik poolitus Accept Nõus Skip Jäta vahele Cancel Loobu Add to the Exception List Add to the Ignore List HySettings &Hyphenation Suggestions &Poolitamisettepanekud Hyphenate Text Automatically &During Typing &Teksti automaatne poolitamine kirjutamise ajal &Language: &Keel: &Smallest Word: Lü&him poolitatav sõna: Consecutive Hyphenations &Allowed: Poolitamisega lõppevaid ridu &järjestikku: A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option. Sisselülitamise korral avatakse menüükäsu Ekstra->Teksti poolitamine valimisel dialoog, kus näidatakse iga sõna võimalikke poolitusi. Enables automatic hyphenation of your text while typing. Lülitab sisse teksti automaatse poolitamise kirjutamise ajal. Length of the smallest word to be hyphenated. Väikseima sõna pikkus, mida veel poolitatakse. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Järjestikuste poolitamisega lõppevate ridade maksimaalne arv. 0 tähendab, et piirang puudub. Ignore List Add a new Entry Edit Entry Exception List ImageInfoDialog Image Info Pildi info General Info Üldine info Date / Time: Kuupäev/kellaaeg: Has Embedded Profile: Põimitud profiil: Yes Jah No Ei Profile Name: Profiili nimi: Has Embedded Paths: Põimitud asukohad: Has Layers: Kihid: EXIF Info EXIF-info Artist: Kunstnik: Comment: Kommentaar: User Comment: Kasutaja kommentaar: Camera Model: Kaamera mudel: Camera Manufacturer: Kaamera tootja: Description: Kirjeldus: Copyright: Autoriõigus: Scanner Model: Skänneri mudel: Scanner Manufacturer: Skänneri tootja: Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported ImportDialog Choose Styles Stiilide valik Available Styles Saadaolevad stiilid Character Styles Märgistiilid Paragraph Styles Lõigustiilid Line Styles Joone stiilid ImportPSPlugin Import &EPS/PS... Impordi &EPS/PS... Imports EPS Files Impordib EPS-faile Imports most EPS files into the current document, converting their vector data into Scribus objects. Impordib EPS-failid aktiivsesse dokumenti, muutes nende vektorandmed Scribuse objektideks. PostScript PostScript PDF PDF Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats Kõik toetatud vormingud Imposition Portrait Püstpaigutus Landscape Rõhtpaigutus ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Alt+U Front side Back side &Booklet Pages per sheet 4 8 16 Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Kaks lehekülge Back page from Destination page Size Suurus Orientation Orientatsioon Width Laius Height Kõrgus Preview Eelvaatlus Refresh preview &OK &OK Alt+G Alt+G &Cancel &Loobu Alt+C Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InsPage Insert Page Lehekülje lisamine &Insert L&isatakse Page(s) lehekülg(e) before Page enne lehekülge after Page pärast lehekülge at End lõppu Master Pages Leheküljetoorikud Normal Normaalne &Master Page: &Leheküljetoorik: Page Size Lehekülje suurus &Size: &Suurus: Custom Kohandatud Orie&ntation: Orie&ntatsioon: Portrait Püstpaigutus Landscape Rõhtpaigutus &Width: &Laius: &Height: &Kõrgus: Move Objects with their Page Objektide liigutamine koos leheküljega InsertAFrame Open Avamine <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the simple Story Editor. <b>Tekstikasti lisamine</b><br/>Tekstikast võimaldab sisestada teksti vajalikku kohta vajaliku vormindusega. Kui soovid kohe kasti dokumendi importida, vali tekstifail valikute kaardilt. Scribus toetab paljude vormingute importimist alates klaartekstist ja lõpetades OpenOffice.org-i dokumentidega.<br/>Sisestatud teksti saab redigeerida ja vormindada kas otse leheküljel või lihtsas looredaktoris. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. <b>Pildikasti lisamine</b><br/>Pildikast võimaldab sisestada leheküljele pildi. Piltidele saab ükshaaval või kombineeritult rakendada mitmesuguseid pildiefekte, sealhulgas läbipaistvus, toon ja muud sellised, mis võimaldavad pilti retušeerida või luua huvitavaid visuaalseid efekte. Piltide skaleerimine ja kuju muutmine käib omaduste paleti abil. Insert A Frame Kasti lisamine T&ype Tüü&p &Text Frame &Tekstikast Alt+T Alt+T &Image Frame P&ildikast Alt+I Alt+I T&able T&abel Alt+A Alt+A Shape Kujund Polygon Hulknurk &Location Asuko&ht Page Placement Asetus lehekülgedel Selecting this will place the frame only on the current page. Selle valimisel asetatakse kast ainult aktiivsele leheküljele. Current Page Aktiivne lehekülg All Pages Kõik leheküljed Selecting this will place frame on the selected range. Selle valimisel asetatakse kast valitud lehekülgede vahemikku. Range of Pages: Lehekülgede vahemik: ... ... Position of Frame Kasti asukoht Selecting this places the frame in the upper left of the page margins defined in your doc setup. Selle valimisel asetatakse kast dokumendi seadistustes määratud veeriste ülemisse vasakusse nurka. Top Left of Margins Veeriste ülemine vasak nurk Selecting this puts the frame on the top left with postion 0,0 Selle valimisel asetatakse kast üles vasakule asukohta 0,0 Top Left of Page Lehekülje ülemine vasak nurk Top Left of Bleed Set the dimensions wished below in the X: Y: dialog below. Määra allolevas dialoogis vajalikud X- ja Y-asukoht. Custom Position: Kohandatud asukoht: X: X: Y: Y: &Size Same as the Page Margins Sama lehekülje veeristega Same as the Page Sama leheküljega Same as the Bleed Same as the Imported Image Custom Size: Kohandatud suurus: Height: Kõrgus: Width: Laius: &Options &Valikud Source Image: Lähtepilt: &Select File... &Vali fail... Alt+S Alt+S There are no options for this type of frame Seda tüüpi kasti jaoks pole valikuid Columns: Veerud: Gap: Vahe: Link Created Frames Loodud kastid lingitakse Source Document: Lähtedokument: &OK &OK &Cancel &Loobu Range of Pages Lehekülgede vahemik Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertAFrameBase Insert A Frame Kasti lisamine T&ype Tüü&p &Text Frame &Tekstikast Alt+T Alt+T &Image Frame P&ildikast Alt+I Alt+I T&able T&abel Alt+A Alt+A Shape Kujund Polygon Hulknurk &Location Asuko&ht Page Placement Asetus lehekülgedel Current Page Aktiivne lehekülg Selecting this will place the frame only on the current page. Selle valimisel asetatakse kast ainult aktiivsele leheküljele. Range of Pages: Lehekülgede vahemik: Selecting this will place frame on the selected range. Selle valimisel asetatakse kast valitud lehekülgede vahemikku. Position of Frame Kasti asukoht Top Left of Page Lehekülje ülemine vasak nurk Selecting this puts the frame on the top left with postion 0,0 Selle valimisel asetatakse kast üles vasakule asukohta 0,0 Top Left of Margins Veeriste ülemine vasak nurk Selecting this places the frame in the upper left of the page margins defined in your doc setup. Selle valimisel asetatakse kast dokumendi seadistustes määratud veeriste ülemisse vasakusse nurka. Custom Position: Kohandatud asukoht: Set the dimensions wished below in the X: Y: dialog below. Määra allolevas dialoogis vajalikud X- ja Y-asukoht. X: X: Y: Y: &Size &Suurus Same as the Page Sama leheküljega Same as the Page Margins Sama lehekülje veeristega Custom Size: Kohandatud suurus: Height: Kõrgus: Width: Laius: &Options &Valikud Source Image: Lähtepilt: &Select File... &Vali fail... Alt+S Alt+S There are no options for this type of frame Seda tüüpi kasti jaoks pole valikuid Source Document: Lähtedokument: Columns: Veerud: Gap: Vahe: &OK &OK &Cancel &Loobu Link Created Frames Loodud kastid lingitakse All Pages Kõik leheküljed ... ... InsertTable Insert Table Tabeli lisamine Number of rows: Ridade arv: Number of columns: Veergude arv: JavaDocs Edit JavaScripts JavaScriptide redigeerimine &Edit... &Redigeeri... &Add... Lis&a... &Delete K&ustuta &Close S&ulge Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. Lisab uue skripti, määrates samas kindlaks samanimelise funktsiooni. Kui soovid seda skripti kasuada avamistoimingu (Open Action) skriptina, ära kindlasti funktsiooni nime muuda. &New Script: &Uus skript: New Script Uus skript Do you really want to delete this script? Kas tõesti see skript kustutada? &Yes &Jah &No &Ei KeyManager Action Toiming Current Key Aktiivne klahv Select a Key for this Action Toimingu klahvi valimine &No Key &Klahv puudub &User Defined Key Kas&utaja määratud klahv ALT+SHIFT+T ALT+SHIFT+T Set &Key &Määra klahv Loadable Shortcut Sets Laaditavad kiirklahvikomplektid &Load &Laadi &Import... &Impordi... &Export... &Ekspordi... &Reset Lä&htesta Keyboard shortcut sets available to load Saadaolevad kiirklahvikomplektid Load the selected shortcut set Laadi valitud kiirklahvikomplekt Import a shortcut set into the current configuration Impordib kiirklahvikomplekti praegusse seadistusse Export the current shortcuts into an importable file Ekspordib aktiivsed kiirklahvid imporditavasse faili Reload the default Scribus shortcuts Laadib uuesti Scribuse vaikimisi kiirklahvid Alt Alt Ctrl Ctrl Shift Shift Meta Meta Meta+ Meta+ Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ This key sequence is already in use See klahvikombinatsioon on juba kasutusel Key Set XML Files (*.ksxml) Klahvikomplektide XML-failid (*.ksxml) LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options Valikud Resolution: Lahutus: Automatic Automaatne DPI Program: Use Preamble Status: Error Viga Finished Running No item selected! Insert symbol Editor Redaktor Information Info An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Run external editor... LayerPalette Delete Layer Kihi kustutamine Do you want to delete all objects on this layer too? Kas kustutada ka kõik selle kihi objektid? Layers Kihid Name Nimi Add a new layer Lisa uus kiht Delete layer Kustuta kiht Raise layer Too kiht ettepoole Lower layer Vii kiht tahapoole Opacity: Läbipaistmatus: % (sp)% Blend Mode: Ühtesulamise režiim: Normal Normaalne Darken Tumendamine Lighten Helendamine Multiply Korrutamine Screen Ekraan Overlay Ülekatmine Hard Light Külm valgus Soft Light Soe valgus Difference Lahutamine Exlusion Väljajätmine Color Dodge Värvi helestamine Color Burn Värvi tumestamine Exclusion Väljajätmine Hue Toon Saturation Küllastus Color Värv Luminosity Valgsus Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Kihi indikaatori värv - igale kihile omistatakse värv, kui kihi indikaatorid on sisse lülitatud. Topeltklõpsuga saab värvi redigeerida. Make Layer Visible - Uncheck to hide the layer from the display Kiht on nähtaval - märke eemaldamisel ei ole kihti näha Print Layer - Uncheck to disable printing. Kihi trükkimine - märke eemaldamisel kihti ei trükita. Lock or Unlock Layer - Unchecked is unlocked Kihi lukustamine - märke eemaldamisel ei ole kiht lukustatud Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below Tekst kulgeb ümber alumiste kihtide objektide - märkimisel kulgeb tekstikastide tekst ümber teiste objektide, isegi kui need asuvad alumistel kihtidel Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Kontuurirežiim - lülitab punktiirjoone näitamist objektide ümber, mis kiirendab väga keeruliste objektide kuvamist. Name of the Layer - Double clicking on the name of a layer enabled editing Kihi nimi - topeltklõpsuga kihi nimel saab seda redigeerida Duplicates the current layer Kloonib aktiivse kihi Selects the Blendmode, works only in PDF-1.4 Layer Transparency, works only in PDF-1.4 and SVG LegacyMode All Files (*) Kõik failid (*) Open All Supported Formats Kõik toetatud vormingud LensDialogBase Optical Lens + - Lens Parameters Radius: Raadius: Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools Lens Effects Apply fancy lens effects LineFormate Edit Line Styles Joonestiilide redigeerimine &Import &Impordi &New &Uus &Edit &Redigeeri D&uplicate &Klooni &Delete K&ustuta &Save &Salvesta Copy of %1 %1 koopia New Style Uus stiil Do you really want to delete this style? Kas tõesti see stiil kustutada? &Yes &Jah &No &Ei Open Avamine Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumendid (*.sla *.sla.gz *.scd *.scd.gz);;Kõik failid (*) Documents (*.sla *.scd);;All Files (*) Dokumendid (*.sla *.scd);;Kõik failid (*) LineStyleW % % Line Width: Joone jämedus: LineStyleWBase LineStyleWBase LineStyleWBase % % Line Width: Joone jämedus: LineStyleWidget pt pt Flat Cap Lameots Square Cap Ruutots Round Cap Ümarots Miter Join Nurkühendus Bevel Join Längühendus Round Join Ümarühendus Solid Line Ühtlane joon Dashed Line Punktiirjoon Dotted Line Punktjoon Dash Dot Line Kriipspunktjoon Dash Dot Dot Line Kriipspunktpunktjoon LoadSavePlugin All Files (*) Kõik failid (*) No File Loader Plugins Found LoremManager Select Lorem Ipsum Lorem Ipsumi valik Author: Autor: Get More: Allikas: XML File: XML-fail: Lorem Ipsum Lorem Ipsum Paragraphs: Lõigud: Alt+O Alt+O Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MarginDialog Manage Page Properties Lehekülje omaduste haldamine Page Size Lehekülje suurus &Size: &Suurus: Custom Kohandatud Orie&ntation: Orie&ntatsioon: Portrait Püstpaigutus Landscape Rõhtpaigutus &Width: &Laius: &Height: &Kõrgus: Move Objects with their Page Objektide liigutamine koos leheküljega Type: Tüüp: Margin Guides Veerisejooned Other Settings Muud seadistused Master Page: Leheküljetoorik: Normal Normaalne Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget Preset Layouts: Valmispaigutused: &Bottom: &All: &Top: Ü&lal: &Right: &Paremal: &Left: &Vasakul: Apply margin settings to all pages Veeriseseadistusi rakendatakse kõigile lehekülgedele Apply the margin changes to all existing pages in the document Veeriste muudatused rakendatakse kõigile dokumendi olemasolevatele lehekülgedele Printer Margins... Printeri veerised... Import the margins for the selected page size from the available printers. Veeriste import valitud leheküljesuurusele saadaolevatelt printeritelt Distance between the top margin guide and the edge of the page Vahemaa ülemise veerisejoone ja lehekülje serva vahel Distance between the bottom margin guide and the edge of the page Vahemaa alumise veerisejoone ja lehekülje serva vahel Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Vahemaa vasaku veerisejoone ja lehekülje serva vahel. Kui valitud on kaks lehekülge kõrvuti, saab seda veeriste vahet kasutada köitmiseks vajalike veeriste korrigeerimiseks. Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Vahemaa parema veerisejoone ja lehekülje serva vahel. Kui valitud on kaks lehekülge kõrvuti, saab seda veeriste vahet kasutada köitmiseks vajalike veeriste korrigeerimiseks. &Inside: S&isemine: O&utside: Vä&limine: Apply settings to: Seadistuste rakendamine: All Document Pages Dokumendi kõigile lehekülgedele All Master Pages Kõigile leheküljetoorikutele Apply the margin changes to all existing master pages in the document Veeriste muudatused rakendatakse dokumendi kõigile leheküljetoorikutele Margin Guides Veerisejooned Top: Bottom: Distance for bleed from the top of the physical page Lõikevaru füüsilise lehekülje ülaservas Distance for bleed from the bottom of the physical page Lõikevaru füüsilise lehekülje allservas Distance for bleed from the left of the physical page Lõikevaru füüsilise lehekülje vasakus servas Distance for bleed from the right of the physical page Lõikevaru füüsilise lehekülje paremas servas Bleeds Inside: Outside: Left: Right: Paremal: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages Leheküljetoorikute redigeerimine Duplicate the selected master page Klooni valitud leheküljetoorik Delete the selected master page Kustuta valitud leheküljetoorik Add a new master page Lisa uus leheküljetoorik Import master pages from another document Impordi leheküljetoorikuid mõnest muust dokumendist Do you really want to delete this master page? Kas tõesti kustutada see leheküljetoorik? &Yes &Jah &No &Ei &Name: &Nimi: New Master Page Uus leheküljetoorik Copy of %1 %1 koopia Name: Nimi: New MasterPage Uus leheküljetoorik New Master Page %1 Uus leheküljetoorik %1 Copy #%1 of Koopia nr. %1 toorikust Normal Normaalne Unable to Rename Master Page Leheküljetooriku ümbernimetamine ebaõnnestus The Normal page is not allowed to be renamed. Normaalset lehekülge ei saa ümber nimetada. Rename Master Page Leheküljetooriku ümbernimetamine New Name: Uus nimi: Copy #%1 of %2 This master page is used at least once in the document. Mdup Multiple Duplicate Mitmekordne kloonimine &Number of Copies: Koo&piate arv: &Horizontal Shift: Ni&he rõhtsuunas: &Vertical Shift: &Nihe püstsuunas: Measurements pt pt Distances Mõõtmine X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: Nurk: Length: Pikkus: ° MeasurementsBase Distances X1: X1: 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: Pikkus: DX: DX: DY: DY: Angle: Nurk: Unit: MergeDoc Import Master Page Leheküljetooriku import Import Page(s) Lehekülgede import &From Document: &Dokumendist: Chan&ge... &Muuda... &Import Page(s): &Imporditakse leheküljed: &Import Master Page &Imporditakse leheküljetoorik Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Sisesta komadega eradatud arvud või märgid: * tähistab kõiki lehekülgi, 1-5 lehekülgede vahemikku, konkreetsed leheküljenumbrid vastavaid lehekülgi. from 0 0 leheküljest Create Page(s) Leheküljed luuakse Before Page enne lehekülge After Page pärast lehekülge At End lõppu &Import &Impordi Open Avamine Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumendid (*.sla *.sla.gz *.scd *.scd.gz);;Kõik failid (*) Documents (*.sla *.scd);;All Files (*) Dokumendid (*.sla *.scd);;Kõik failid (*) from %1 %1 leheküljest &Select... MeshDistortionDialog + - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset Lä&htesta MeshDistortionPlugin Mesh Distortion... Path Tools Mesh Distortion of Polygons MissingFont Missing Font Puuduv font The Font %1 is not installed. Font %1 ei ole paigaldatud. Use Font instead asendab fondi ModeToolBar Tools Tööriistad Properties... Omadused... MovePages Move Pages Lehekülgede liigutamine Copy Page Lehekülje kopeerimine Move Page(s) Lehekülgede liigutamine To: leheküljele: Number of copies: Koopiate arv: Before Page Enne lehekülge After Page Pärast lehekülge At End Lõppu Move Page(s): Lehekülgede liigutamine: MultiLine Edit Style Stiili redigeerimine Flat Cap Lameots Square Cap Ruutots Round Cap Ümarots Miter Join Nurkühendus Bevel Join Längühendus Round Join Ümarühendus Line Width: Joone jämedus: pt pt % % pt pt Solid Line Ühtlane joon Dashed Line Punktiirjoon Dotted Line Punktjoon Dash Dot Line Kriipspunktjoon Dash Dot Dot Line Kriipspunktpunktjoon Name "%1" isn't unique.<br/>Please choose another. Nimi "%1" ei ole unikaalne.<br/>Palun vali mõni muu nimi. OK OK pt pt MultiProgressDialog Progress Edenemine Overall Progress: Üldine edenemine: &Cancel &Loobu %v of %m MultiProgressDialogBase Progress Edenemine Overall Progress: Üldine edenemine: &Cancel &Loobu MultipleDuplicate &Horizontal Shift: Ni&he rõhtsuunas: &Vertical Shift: &Nihe püstsuunas: &Horizontal Gap: V&ahe rõhtsuunas: &Vertical Gap: &Vahe püstsuunas: Multiple Duplicate Mitmekordne kloonimine &By Number of Copies Koo&piate arvu järgi &Number of Copies: Koo&piate arv: &Shift Created Items By Loo&dud elementide nihutamine Alt+S Alt+S Create &Gap Between Items Of &Vahe loomine elementide vahele Alt+G Alt+G Rotation: By &Rows && Columns &Ridade ja veergude järgi Vertical Gap: Vahe püstsuunas: Horizontal Gap: Vahe rõhtsuunas: Number of Rows: Ridade arv: Number of Columns: Veergude arv: &OK &OK &Cancel &Loobu MultipleDuplicateBase Multiple Duplicate Mitmekordne kloonimine &By Number of Copies Koo&piate arvu järgi &Number of Copies: Koo&piate arv: Create &Gap Between Items Of &Vahe loomine elementide vahele Alt+G Alt+G &Shift Created Items By Loo&dud elementide nihutamine Alt+S Alt+S &Horizontal Shift: Ni&he rõhtsuunas: &Vertical Shift: &Nihe püstsuunas: By &Rows && Columns &Ridade ja veergude järgi Vertical Gap: Vahe püstsuunas: Horizontal Gap: Vahe rõhtsuunas: Number of Rows: Ridade arv: Number of Columns: Veergude arv: &OK &OK &Cancel &Loobu MyPlugin My &Plugin Minu &plugin MyPluginImpl Scribus - My Plugin Scribus - Minu plugin The plugin worked! Plugin töötas! NewDoc Custom Kohandatud New Document Uus dokument &New Document &Uus dokument Open &Existing Document Ol&emasolev dokument Open Recent &Document Viimati kasutatud &dokument Do not show this dialog again Seda dialoogi rohkem ei näidata Document page size, either a standard size or a custom size Dokumendi lehekülje suurus: kas mõni standardne või kohandatud Orientation of the document's pages Dokumendi lehekülgede orientatsioon Width of the document's pages, editable if you have chosen a custom page size Dokumendi lehekülgede laius. Kui valisid kohandatud suuruse, saab seda muuta. Height of the document's pages, editable if you have chosen a custom page size Dokumendi lehekülgede kõrgus. Kui valisid kohandatud suuruse, saab seda muuta. Initial number of pages of the document Esialgne dokumendi lehekülgede arv Default unit of measurement for document editing Dokumendi redigeerimisel vaikimisi kasutatav mõõtühik Create text frames automatically when new pages are added Tekstikastide automaatne loomine uute lehekülgede lisamisel Number of columns to create in automatically created text frames Veergude arv automaatselt loodud tekstikastides Distance between automatically created columns Automaatselt loodud veergude vahe Page Size Lehekülje suurus &Size: &Suurus: Orie&ntation: Orie&ntatsioon: Portrait Püstpaigutus Landscape Rõhtpaigutus &Width: &Laius: &Height: &Kõrgus: Margin Guides Veerisejooned Options Valikud N&umber of Pages: Le&hekülgede arv: &Default Unit: Va&ikimisi ühik: &Automatic Text Frames &Automaatsed tekstikastid &Gap: Va&he: Colu&mns: V&eergude arv: Open Avamine Page Layout Lehekülgede paigutus First Page is: Esimene lehekülg on: Show Document Settings After Creation Document Layout NewFromTemplatePlugin New &from Template... Uus &mallist... Load documents with predefined layout Laadib valmispaigutusega dokumente Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). Teiste või enda loodud dokumendipõhja avamine (tagab dokumentidele ühtse stiili). NodePalette Nodes Sõlmed % % &Absolute Coordinates &Absoluutsed koordinaadid &X-Pos: &X-asukoht: &Y-Pos: &Y-asukoht: Edit &Contour Line &Kontuurjoone redigeerimine &Reset Contour Line Lä&htesta kontuurjoon &End Editing Lõp&eta redigeerimine Move Nodes Sõlmede liigutamine Move Control Points Kontrollpunktide liigutamine Add Nodes Sõlmede lisamine Delete Nodes Sõlmede kustutamine Move Control Points Independently Kontrollpunktide liigutamine ükshaaval Move Control Points Symmetrical Kontrollpunktide liigutamine sümmeetriliselt Reset Control Points Kontrollpunktide lähtestamine Reset this Control Point Konkreetse kontrollpunkti lähtestamine Open a Polygon or Cuts a Bezier Curve Hulknurga avamine või Bezier' kõvera lõikamine Close this Bezier Curve Bezier' kõvera sulgemine Mirror the Path Horizontally Asukoha peegeldamine rõhtsuunas Mirror the Path Vertically Asukoha peegeldamine püstsuunas Shear the Path Horizontally to the Right Asukoha nihe rõhtsuunas paremale Shear the Path Horizontally to the Left Asukoha nihe rõhtsuunas vasakule Shear the Path Vertically Up Asukoha nihe püstsuunas üles Shear the Path Vertically Down Asukoha nihe püstsuunas alla Rotate the Path Counter-Clockwise Asukoha pööramine vastupäeva Rotate the Path Clockwise Asukoha pööramine päripäeva Shrink the Size of the Path by shown % Asukoha suuruse kärpimine määratud protsendi võrra Enlarge the Size of the Path by shown % Asukoha suuruse suurendamine määratud protsendi võrra Reduce the Size of the Path by the shown value Asukoha suuruse kärpimine määratud väärtuse võrra Enlarge the Size of the Path by the shown value Asukoha suuruse suurendamine määratud väärtuse võrra Angle of Rotation Pööramisnurk % to Enlarge or Shrink By Suurendamise või vähendamise protsent Value to Enlarge or Shrink By Suurendamise või vähendamise väärtus Activate Contour Line Editing Mode Kontuurjoone redigeerimise lubamine Reset the Contour Line to the Original Shape of the Frame Kontuurjoone lähtestamine kasti esialgsele kujule When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Sisselülitamisel kasutatakse leheküljega, vastasel juhul objektiga seotud koordinaate. Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas to Page Set Shape to Image Clip Set the Shape to the Clipping Path of the Image OODPlug This document does not seem to be an OpenOffice Draw file. See dokument ei paista olevat OpenOffice Draw' fail. Group%1 Grupp%1 OODrawImportPlugin Import &OpenOffice.org Draw... Impordi &OpenOffice.org Draw... Imports OpenOffice.org Draw Files Impordib OpenOffice.org Draw' faile Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Impordib OpenOffice.org Draw' failid aktiivsesse dokumenti, muutes nende vektorandmed Scribuse objektideks. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features The file could not be imported OdtDialog OpenDocument Importer Options OpenDocument'i importija valikud Overwrite Paragraph Styles Lõigustiilide ülekirjutamine Enabling this will overwrite existing styles in the current Scribus document Sisselülitamisel kirjutatakse aktiivses Scribuse dokumendis olemasolevad stiilid üle Merge Paragraph Styles Lõigustiilide ühendamine Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Lõigustiilid ühendatakse atribuutide kaupa. See vähendab erinevate lõigustiilide hulka, kui originaaldokumendis kasutatakse teistsuguse nimega, aga samasuguste atribuutidega stiili. Use document name as a prefix for paragraph styles Dokumendi nime kasutamine lõigustiili prefiksina Prepend the document name to the paragraph style name in Scribus. Dokumendi nimi lisatakse Scribuses lõigustiilide ette. Do not ask again Rohkem ei küsita Make these settings the default and do not prompt again when importing an OASIS OpenDocument. Määratud seadistused muudetakse vaikeseadistusteks ning dialoogi OASIS OpenDocument'i importimisel enam ei näidata. OK OK Cancel Loobu OldScribusFormat Scribus Document Scribuse dokument Scribus 1.2.x Document Scribus 1.2.x dokument OneClick Origin Size Suurus Width: Laius: Length: Pikkus: Height: Kõrgus: Angle: Nurk: Remember Values OutlinePalette Element Element Name "%1" isn't unique.<br/>Please choose another. Nimi "%1" ei ole unikaalne.<br/>Palun vali mõni muu nimi. Group Grupp Page Free Objects Vabad objektid Outline Struktuur Enter a keyword or regular expression to filter the outline. Filter: Ctrl+F Filter the Outline using a keyword OutlineValues % % Linewidth Joone jämedus PDFExportDialog Save as PDF Salvestamine PDF-failina O&utput to File: Välj&undfail: Cha&nge... &Muuda... Output one file for eac&h page I&ga lehekülg salvestatakse eraldi failina &Save &Salvesta This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. Võimaldab iga dokumendi lehekülje eksportida omaette nimega PDF-failina. Leheküljenumbrid lisatakse automaatselt. See on eriti abiks PDF-failide järjestamisel trükikotta saatmiseks. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. Salvestamisnupp ei ole aktiivne, kui püüad eksportida PDF/X-3 ning PDF/X-3 kaardil puudub infostring. Save as Salvestamine PDF Files (*.pdf);;All Files (*) PDF-failid (*.pdf);;Kõik failid (*) %1 does not exists and will be created, continue? %1 puudub, mistõttu see luuakse. Kas jätkata? Cannot create directory: %1 Kataloogi ei õnnestunud luua: (new line) %1 Save As Salvestamine PDFLibCore Saving PDF PDF-i salvestamine Exporting Master Page: Leheküljetooriku eksport: Exporting Page: Lehekülje eksport: Exporting Items on Current Page: Aktiivse lehekülje elementide eksport: Page: Lehekülg: Date: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occured, please check available disk space PDFToolBar PDF Tools PDF-i tööriistad PDFlib Saving PDF PDF-i salvestamine Exporting Master Page: Leheküljetooriku eksport: Exporting Page: Lehekülje eksport: Exporting Items on Current Page: Aktiivse lehekülje elementide eksport: Page: Lehekülg: PPreview Print Preview Trükkimise eelvaatlus Anti-alias &Text &Teksti antialias Anti-alias &Graphics &Graafika antialias Display Trans&parency Lä&bipaistvuse näitamine &Under Color Removal &Under Color Removal &Display CMYK CMYK-i &näitamine Force Overprint Mode Ületrükirežiim &C &C &M &M &Y &Y &K &K Separation Name Värvilahutuse nimi Cyan Tsüaan Magenta Magenta Yellow Kollane Black Must Scaling: Skaleerimine: Close Sulge Print... Trüki... Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Võimaldab tekstielementide ilusamat esitamist aknas, seda küll mõningase eelvaatluse aeglustumisega. See puudutab ainult Type 1 fonte. Provides a more pleasant view of TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Võimaldab TrueType fontide, OpenType fontide, EPS-i, PDF-i ja vektorgraafika ilusamat esitamist aknas, seda küll mõningase eelvaatluse aeglustumisega. See puudutab ainult Type 1 fonte. Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Näitab läbipaistvust ja dokumendi läbipaistvaid elemente. Vajalik on Ghostscript 7.07 või uuem. Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Trükkimise eelvaatlusel simuleeritakse RGB värvide asemel CMYK värve A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Võimalus lülitada välja mõningad tsüaanist, kollasest ja magentast koosnevad halli toonid ning kasutada selle asemel musta. UCR mõjutab kõige rohkem piltide neid osi, kus valitsevad neutraalsed ja/või tumedad toonid, mis on suhteliselt lähedal hallile. Selle valiku kasutamisel võib paraneda mõningate piltide trükikvaliteet, kuid alati tuleb seda katse-eksituse meetodil ise järele proovida. UCR vähendab üleküllastuse võimalust CMY värvides. Resize the scale of the page. Lehekülje skaleerimise muutmine. Enable/disable the C (Cyan) ink plate C värvi (tsüaan) lubamine/keelamine Enable/disable the M (Magenta) ink plate M värvi (magenta) lubamine/keelamine Enable/disable the Y (Yellow) ink plate Y värvi (kollane) lubamine/keelamine Enable/disable the K (Black) ink plate K värvi (must) lubamine/keelamine All Kõik File Fail Enable &Antialiasing &Antialiase lubamine Fit to Width Mahutamine laiusele Fit to Height Mahutamine kõrgusele Fit to Page Mahutamine leheküljele Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Võimaldab Type 1 fontide, TrueType fontide, OpenType fontide, EPS-i, PDF-i ja vektorgraafika ilusamat esitamist aknas, seda küll mõningase eelvaatluse aeglustumisega Display Settings Vaateseadistused Print Settings Trükkimisseadistused Mirror Page(s) Horizontal Lehekülgede peegeldamine rõhtsalt Mirror Page(s) Vertical Lehekülgede peegeldamine püstiselt Clip to Page Margins Kärpimine lehekülje veeriste juures Print in Grayscale Halltoonis trükk Convert Spot Colors Spot-värvidesse teisendamine Apply ICC Profiles ICC profiilide rakendamine Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Sisselülitamisel teisendatakse spot-värvid komposiitvärvideks. Kui sa ei kavatse just saata trükikotta spot-värve, on mõttekas see sisse lülitada. Enables global Overprint Mode for this document, overrides object settings Sisselülitamisel kehtestatakse dokumendile üldine ületrükirežiim, mis tühistab objektide määratlused Allows you to embed ICC profiles in the print stream when color management is enabled Võimaldab värvihalduse korral põimida trükkimisandmetesse ICC profiilid Apply Color Profiles Allows you to embed color profiles in the print stream when color management is enabled Clip to Printer Margins PSLib Processing Master Page: Leheküljetooriku töötlemine: Exporting Page: Lehekülje eksport: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PStyleW Form1 Vorm1 Tabulators and Indentation Tabeldusmärgid ja taandus Distances and Alignment Vahed ja joondus Drop Caps Süvisinitsiaalid Parent's Drop Cap Status Eellase süvisinitsiaali olek Ch&aracter Style Mär&gistiil PStyleWBase Form1 Vorm1 Properties OmadusedOmadused Parent Eellane Distances and Alignment Vahed ja joondus Drop Caps Süvisinitsiaalid Parent's Drop Cap Status Eellase süvisinitsiaali olek Tabulators and Indentation Tabeldusmärgid ja taandus Ch&aracter Style Mär&gistiil PageItem Image Pilt Text Tekst Line Joon Polygon Hulknurk Polyline Kompleksjoon PathText Trajektooritekst Copy of Koopia - PageItemAttributes None relationship Puudub Relates To On seotud elemendiga Is Parent Of On eellane elemendile Is Child Of On järglane elemendile Page Item Attributes Lehekülje elemendi atribuudid &Add Lis&a Alt+A Alt+A &Copy &Kopeeri Alt+C Alt+C &Delete K&ustuta Alt+D Alt+D C&lear &Puhasta Alt+L Alt+L &OK &OK &Cancel &Loobu Name Nimi Type Tüüp Value Väärtus Parameter Parameeter Relationship Seos Relationship To Seos elemendiga Attributes Atribuudid PageItemAttributesBase Page Item Attributes Lehekülje elemendi atribuudid Name Nimi Type Tüüp Value Väärtus Parameter Parameeter Relationship Seos Relationship To Seos elemendiga &Add Lis&a Alt+A Alt+A &Copy &Kopeeri Alt+C Alt+C &Delete K&ustuta Alt+D Alt+D C&lear &Puhasta Alt+L Alt+L &OK &OK &Cancel &Loobu PageItem_ImageFrame Picture Pilt Preview Settings Eelvaatluse seadistused Image Pilt Embedded Image PageItem_LatexFrame Error Viga Running the external application failed! Could not create a temporary file to run the application! Information Info Running the application "%1" failed! OK OK Running The application "%1" failed to start! The application "%1" crashed! Application DPI DPI State Finished Render The config file didn't specify a executable path! Render Frame No configuration defined to run the application! No application defined PageItem_PathText Paragraphs: Lõike: Lines: Read: Words: Sõnu: Chars: Märke: PageItem_TextFrame Linked Text Lingitud tekst Text Frame Tekstikast Paragraphs: Lõike: Lines: Read: Words: Sõnu: Chars: Märke: PageLayouts Page Layout Lehekülgede paigutus First Page is: Esimene lehekülg on: Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Double sided Kaks lehekülge Middle Right Parem keskmine Drag pages or master pages onto the trashbin to delete them Lohista leheküljed või leheküljetoorikud kustutamiseks prügikasti Here are all your master pages. To create a new page, drag a master page to the page view below Siin on näha kõik leheküljetoorikud. Uue lehekülje loomiseks lohista toorik allolevasse leheküljekasti. Normal Normaalne Arrange Pages Lehekülgede korraldamine Available Master Pages: Saadaolevad leheküljetoorikud: Document Pages: Dokumendi leheküljed: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. This master page is used at least once in the document. Do you really want to delete this master page? Kas tõesti kustutada see leheküljetoorik? PageSelector %1 of %1 %1 (kokku %1) %1 of %2 %1 (kokku %2) PageSize Quarto Quarto Foolscap Foolscap Letter Letter Government Letter Government Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium Medium Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E ParaStyleComboBox No Style Stiil puudub PathAlongPathPlugin Path Along Path... Path Tools Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathConnectDialogBase Connect Paths Connect first Line Starting Point End Point with second Line with: a straight Line Points moving Preview on Canvas PathConnectPlugin Connect Paths Path Tools Connect 2 Polylines. PathCutPlugin Cut Polygon Path Tools Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error Viga The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 180° 270° PathFinderBase Boolean Path Operations Keep a copy of the original Item after applying the operation keep + = Operation ... ... Swap Shapes Options Valikud first Shape second Shape First source shape. Second source shape. The resulting shape. Unites the shapes Substrats the second shape from the first shape Intersection of the shapes Result is the area where the two shapes do not intersect Break apart, The result is a combination of "Intersection" and "Exclusion" Exchange the source shapes. Result gets Color from: The resulting shape gets the color of the first source shape. The resulting shape gets the colors listed below. Custom Colors Stroke: Select stroke color. Fill: Select fill color. PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Path Operations Apply fancy boolean operations to paths. Qt Version too old This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Path Tools Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Kataloogi valik Loading Patterns Mustrite laadimine All Files (*) Kõik failid (*) Open Ava Patterns Mustrid Load Laadi Load Set Laadi kogu Remove Remove All OK OK Cancel &Name: &Nimi: Rename Entry All Supported Formats Kõik toetatud vormingud Rename PicSearch Result Tulemus Search Results for: Otsingutulemused: Preview Eelvaatlus Select Vali Cancel Loobu Size: Suurus: Resolution: Lahutus: DPI DPI Unknown Teadmata RGB RGB CMYK CMYK Grayscale Halltoonid Duotone Duotone Colorspace: Värviruum: &Preview &Eelvaatlus Alt+P Alt+P &Select &Vali Alt+S Alt+S PicSearchBase Result Tulemus Search Results for: Otsingutulemused: &Preview &Eelvaatlus Alt+P Alt+P &Select &Vali Alt+S Alt+S PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Märkimisel otsitakse failisüsteemist failinimesid suur- ja väiketähtede erinevust arvestamata. Arvesta, et see on vaikevalik ainult vähestes operatsioonisüsteemides, nt. MS Windowsis Cancel Search Katkesta otsing Start Search Select a base directory for search Otsingu baaskataloogi valik Scribus - Image Search Scribus - pildiotsing The search failed: %1 Otsing ebaõnnestus: %1 Search Images Search for: Otsimine: Start at: Change... Muuda... Searching Case insensitive search Tõstutundetu otsing Search recursively Base directory for search does not exist. Please choose another one. PicStatus Manage Pictures Piltide haldamine Name Nimi Path Asukoht Page Lehekülg Print Trükitav Status Olek Yes Jah OK OK Missing Puuduv Search Otsi Cancel Search Katkesta otsing Goto Liigu Select a base directory for search Otsingu baaskataloogi valik Scribus - Image Search Scribus - pildiotsing The search failed: %1 Otsing ebaõnnestus: %1 No images named "%1" were found. Pilti nimega "%1" ei leitud. Search Directory Otsingukataloog Close Sulge Set a new location for the selected items. Useful when you may have moved the document but not the images. Määra valitud elementide uus asukoht. Kasulik, kui oled näiteks liigutanud dokumenti, aga mitte pilte. Select a base directory for your selected rows Vali valitud ridade baaskataloog Case insensitive search Tõstutundetu otsing The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Märkimisel otsitakse failisüsteemist failinimesid suur- ja väiketähtede erinevust arvestamata. Arvesta, et see on vaikevalik ainult vähestes operatsioonisüsteemides, nt. MS Windowsis Not on a Page JPG TIFF PSD EPS/PS PDF PDF JPG2000 emb. PSD Unknown Teadmata RGB RGB CMYK CMYK Grayscale Halltoonid Duotone Duotone n/a Information Info Path: Search... Name: Nimi: Image Pilt DPI: Format: Vorming: Colorspace: Värviruum: Size Suurus Pixels: Scale: Skaleerimine: Printed: Layout On Page: Select Vali Image Tools Image Visible Image Effects... Edit Image... Redigeeri pilti... Extended Image Properties... Sort by Name Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Set format specfic properties of certain image types, like clipping paths Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame Embedded Image PixmapExportPlugin Save as &Image... Salvesta p&ildina... Export As Image Eksport pildina Exports selected pages as bitmap images. Ekspordib valitud leheküljed bittrasterpiltidena. Save as Image Salvestamine pildina Error writing the output file(s). Viga väljundfaili kirjutamisel. Export successful Eksport õnnestus The target location %1 must be an existing directory The target location %1 must be writable PluginManager Cannot find plugin plugin manager Pluginat ei leitud unknown error plugin manager tundmatu viga Cannot find symbol (%1) plugin manager Sümbolit ei leitud (%1) Plugin: loading %1 plugin manager Plugin: %1 laadimine init failed plugin load error init ebaõnnestus unknown plugin type plugin load error tundmatu plugina tüüp Plugin: %1 loaded plugin manager Plugin; %1 laaditud Plugin: %1 failed to load: %2 plugin manager Plugin: %1 laadimine ebaõnnestus: %2 Plugin: %1 initialized ok plugin manager Plugin: %1 initsialiseerimine korras Plugin: %1 failed post initialization plugin manager Plugin: %1 ebaõnnestus initsialiseerimise järel There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. Tekkis probleem %1 plugina laadimisel (%2 pluginast). Arvatavasti põhjustas seda mingi sõltuvusprobleem või vanade pluginate olemasolu paigaldamiskataloogis. Kui puhastad paigaldamiskataloogi ja taaspaigaldamisel tekib endiselt probleem, anna sellest palun teada veebisaidil bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Pluginahaldur Plugin Plugin How to run Käivitamine Type Tüüp Load it? Laaditav? Plugin ID Plugina ID File Fail Yes Jah No Ei You need to restart the application to apply the changes. Muudatuste rakendamiseks tuleb rakendus uuesti käivitada. Form PolygonProps Polygon Properties Hulknurga omadused PolygonWidget Corn&ers: &Nurki: &Rotation: Pöö&ramine: Apply &Factor Te&guri rakendamine % % &Factor: Te&gur: Number of corners for polygons Hulknurga nurkade arv Degrees of rotation for polygons Hulknurga pööramine kraadides Apply Convex/Concave Factor to change shape of Polygons Nõgususe/kumeruse teguri rakendamine hulknurga kuju muutmiseks Sample Polygon Näidishulknurk A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatiivne väärtus muudab hulknurga nõgusaks (tähekujuliseks), positiivne kumeraks PolygonWidgetBase Form Corn&ers: &Nurki: Number of corners for polygons Hulknurga nurkade arv &Rotation: Pöö&ramine: Degrees of rotation for polygons Hulknurga pööramine kraadides Sample Polygon Näidishulknurk Apply Convex/Concave Factor to change shape of Polygons Nõgususe/kumeruse teguri rakendamine hulknurga kuju muutmiseks Apply &Factor Te&guri rakendamine &Factor: Te&gur: A negative value will make the polygon concave (or star shaped), a positive value will make it convex Negatiivne väärtus muudab hulknurga nõgusaks (tähekujuliseks), positiivne kumeraks % C&urvature: Preferences Custom Kohandatud Preferences Seadistused GUI Kasutajaliides &Language: &Keel: &Theme: &Teema: Show S&plashscreen On Startup: Käivitusekraani &näitamine: pt pt &Font Size (Menus): &Fondi suurus (menüüs): Font Size (&Palettes): Fondi suurus (&palettides): &Wheel Jump: &Hiireratas kerib: &Recent Documents: V&iimati kasutatud dokumente: Paths Asukohad &Documents: &Dokumendid: &Change... &Muuda... &ICC Profiles: I&CC profiilid: C&hange... M&uuda... &Scripts: &Skriptid: Ch&ange... Muu&da... Document T&emplates: Do&kumendimallid: Cha&nge... Muud&a... General Üldine Page Size Lehekülje suurus &Size: &Suurus: Portrait Püstpaigutus Landscape Rõhtpaigutus Orie&ntation: Orie&ntatsioon: Units: Ühikud: &Width: &Laius: &Height: &Kõrgus: Margin Guides Veerisejooned Autosave Automaatne salvestamine min min &Interval: &Intervall: Undo/Redo Tagasivõtmine/uuestitegemine Action history length Toimingute ajaloo pikkus Document Dokument Guides Juhtjooned Typography Tüpograafia Tools Tööriistad Hyphenator Poolitaja Fonts Fondid Preflight Verifier Trükieelne kontroll Color Management Värvihaldus PDF Export PDF-i eksport Document Item Attributes Dokumendi elemendi atribuudid Table of Contents and Indexes Sisukord ja registrid Keyboard Shortcuts Kiirklahvid Page Display Lehekülje vaade Color: Värv: Display &Unprintable Area in Margin Color &Mittetrükitavat ala näidatakse veerise värviga Alt+U Alt+U Show Pictures Piltide näitamine Show Text Chains Tekstiahela näitamine Show Text Control Characters Mittetrükitavate märkide näitamine Show Frames Kastide näitamine Rulers relative to Page Joonlauad on seotud leheküljega Scratch Space Sodiala &Top: Ü&lal: &Left: &Vasakul: &Bottom: &All: &Right: &Paremal: Gaps between Pages Lehekülgede vahe Horizontal: Rõhtsuunas: Vertical: Püstsuunas: &Adjust Display Size V&aate suuruse muutmine To adjust the display drag the ruler below with the slider. Vaate kohandamiseks lohista allpool joonlaual liugurit. Display Vaade External Tools Välised tööriistad Always ask before fonts are replaced when loading a document Dokumendi avamisel küsitakse alati, kas fonte asendada Preview of current Paragraph Style visible when editing Styles Stiili redigeerimisel näidatakse aktiivse lõigustiili eelvaatlust Show Startup Dialog Käivitusdialoogi näitamine Lorem Ipsum Lorem Ipsum Always use standard Lorem Ipsum Alati kasutatakse standardset Lorem Ipsumit Count of the Paragraphs: Lõikude arv: Miscellaneous Muud Plugins Pluginad Enable or disable the display of linked frames. Seotud kastide näitamise lubamine või keelamine. Display non-printing characters such as paragraph markers in text frames Mittetrükitavate märkide näitamine (nt. lõigutähised tekstikastis) Turns the display of frames on or off Kastide näitamise lubamine või keelamine Turns the display of pictures on or off Piltide näitamise lubamine või keelamine Select your default language for Scribus to run with. Leave this blank to choose based on environment variables. You can still override this by passing a command line option when starting Scribus Scribuse vaikimisi töökeele valimine. Tühjaksjätmisel kasutatakse keskkonnamuutujatega määratud väärtust. Seda saab siiski tühistada, kui Scribust käsurealt käivitades vastav võti lisada. Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes, if Qt is configured to search KDE plugins. Akna dekoratsioonide ja välimuse vaikeväärtus. Scribus kasutab kõiki saadaolevaid KDE või Qt teemasid, kui Qt on seadistatud leidma KDE pluginaid. Default font size for the menus and windows Menüüde ja akende fondi vaikesuurus Default font size for the tool windows Tööriistaakende fondi vaikesuurus Default unit of measurement for document editing Vaikimisi mõõtühik dokumendi redigeerimisel Number of lines Scribus will scroll for each move of the mouse wheel Ridade arv, mille võrra Scribus kerib hiireratta liigutamisel Number of recently edited documents to show in the File menu Menüüs Fail näidatavate viimati kasutatud dokumentide arv Default documents directory Dokumentide vaikimisi kataloog Default ICC profiles directory. This cannot be changed with a document open. By default, Scribus will look in the System Directories under Mac OSX and Windows. On Linux and Unix, Scribus will search $home/.color/icc,/usr/share/color/icc and /usr/local/share/color/icc ICC profiilide vaikimisi kataloog. Seda ei saa muuta, kui mõni dokument on avatud. Vaikimisi otsib Scribus neid Mac OS X ja Windowsi korral süsteemsetest kataloogidest. Linuxi ja Unixi korral otsib Scribus neid kataloogidest $home/.color/icc,/usr/share/color/icc ja /usr/local/share/color/icc.(sp) Default Scripter scripts directory Skriptija vaikimisi skriptide kataloog Additional directory for document templates Täiendav dokumendimallide kataloog Default page size, either a standard size or a custom size Dokumendi lehekülje suurus: kas mõni standardne või kohandatud Default orientation of document pages Dokumendi lehekülgede vaikimisi orientatsioon Width of document pages, editable if you have chosen a custom page size Dokumendi lehekülgede laius. Kui valisid kohandatud suuruse, saab seda muuta. Height of document pages, editable if you have chosen a custom page size Dokumendi lehekülgede kõrgus. Kui valisid kohandatud suuruse, saab seda muuta. When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Sisselülitamise korral salvestab Scribus määratud aja möödumisel alati varukoopia laiendiga .bak Time period between saving automatically Automaatsete salvestamiste intervall Set the length of the action history in steps. If set to 0 infinite amount of actions will be stored. Toimingute ajaloo pikkus sammudes. 0 tähendab, et salvestatakse piiramatu hulk toiminguid. Color for paper Paberi värv Mask the area outside the margins in the margin color Veeristest väljapoole jäävale alale antakse veerise värv Set the default zoom level Vaikimisi suurendustaseme määramine Place a ruler against your screen and drag the slider to set the zoom level so Scribus will display your pages and objects on them at the correct size Liugurit lohistades saab kindlaks määrata vajaliku suurendustaseme, millega Scribus näitab lehekülgi ja objekte Defines amount of space left of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrab ruumi suuruse vasakul pool dokumendiala, mida saab kasutada lõikelauana elementide loomiseks ja muutmiseks ja kust neid saab aktiivsele leheküljele lohistada Defines amount of space right of the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrab ruumi suuruse paremal pool dokumendiala, mida saab kasutada lõikelauana elementide loomiseks ja muutmiseks ja kust neid saab aktiivsele leheküljele lohistada Defines amount of space above the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrab ruumi suuruse dokumendiala kohal, mida saab kasutada lõikelauana elementide loomiseks ja muutmiseks ja kust neid saab aktiivsele leheküljele lohistada Defines amount of space below the document canvas available as a pasteboard for creating and modifying elements and dragging them onto the active page Määrab ruumi suuruse dokumendiala all, mida saab kasutada lõikelauana elementide loomiseks ja muutmiseks ja kust neid saab aktiivsele leheküljele lohistada Choose a Directory Kataloogi valik Scrapbook Visandimapp Printer Printer PrefsDialogBase Save... Salvesta... &Defaults &Vaikeväärtused Save Preferences Seadistuste salvestamine Export... Ekspordi... &Apply &Rakenda All preferences can be reset here Siin saab lähtestada kõik seadistused Apply all changes without closing the dialog Kõigi muudatuste rakendamine ilma dialoogi sulgemata Export current preferences into file Kehtivate seadistuste eksportimine faili PrefsManager PostScript PostScript Migrate Old Scribus Settings? Kas migreerida Scribuse vanad seadistused? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Scribus tuvastas Scribus 1.2 seadistustefailide olemasolu. Kas soovid need migreerida Scribuse uude versiooni? Could not open preferences file "%1" for writing: %2 Seadistustefaili "%1" avamine kirjutamiseks ebaõnnestus: %2 Writing to preferences file "%1" failed: QIODevice status code %2 Seadistustefaili "%1" kirjutamine ebaõnnestus: QIODevice olekukood %2 Failed to open prefs file "%1": %2 Seadistustefaili "%1" avamine ebaõnnestus: %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Seadistuste XML-i lugemine failist "%1" ebaõnnestus: %2 real %3, veerus %4 Postscript PostScript PDF 1.3 PDF 1.3 PDF 1.4 PDF 1.4 PDF/X-3 PDF/X-3 Error Writing Preferences Viga seadistuste salvestamisel Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Scribus ei suutnud seadistusi salvestada:<br>%1<br>Palun kontrolli faili ja kataloogi õigusi ning kettaruumi. Error Loading Preferences Viga seadistuste laadimisel Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. Scribus ei suutnud seadistusi laadida:<br>%1<br>Laaditakse vaikeseadistused. PDF 1.5 PDF 1.5 PresetLayout None layout type Puudub Gutenberg Gutenberg Magazine Ajakiri Fibonacci Fibonacci Golden Mean Kuldne keskmine Nine Parts Üheksa osa You can select predefined page layout here. 'None' leave margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins for same value. Leading is Left/Inside value. Siin saab valida lehekülje valmispaigutuse. 'Puudub' jätab veerised endiseks, Gutenberg määratleb need klassikaliselt, 'Magazine' aga kõik veerised võrdseks. Aluseks võetakse vasak/sisemise veerise väärtus. You can select a predefined page layout here. 'None' leave margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins for same value. Leading is Left/Inside value. Siin saab valida eelmääratud kujunduse. 'Puudub' jätab veerised puutumata, Gutenberg kehtestab klassikalised veerised, 'Ajakiri' määrab kõigile veeristele sama väärtuse. Aluseks võetakse vasaku/sisemise veerise väärtus. When you have selected a Document Layout other than Single Page, you can select a predefined page layout here. 'None' leaves margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins to the same value. Leading is Left/Inside value. PrintDialog Setup Printer Printeri seadistused Print Destination Trükkimise sihtkoht File Fail &Options... &Valikud... &File: &Fail: C&hange... &Muuda... A&lternative Printer Command Al&ternatiivne trükkimiskäsk Co&mmand: Kä&sk: Range Vahemik Print &All &Kõik Print Current Pa&ge &Aktiivne lehekülg Print &Range T&rükkimisvahemik N&umber of Copies: Koo&piate arv: Print Normal Normaalne trükk Print Separations Trükkimine separeeritult Print in Color if Available Värvitrükk (kui võimalik) Print in Grayscale Halltoonis trükk All Kõik Cyan Tsüaan Magenta Magenta Yellow Kollane Black Must PostScript Level 1 PostScript tase 1 PostScript Level 2 PostScript tase 2 PostScript Level 3 PostScript tase 3 Options Valikud Page Lehekülg Mirror Page(s) Horizontal Lehekülgede peegeldamine rõhtsalt Mirror Page(s) Vertical Lehekülgede peegeldamine püstiselt Set Media Size Andmekandja suuruse määramine Clip to Page Margins Kärpimine lehekülje veeriste juures Color Värv Apply Under Color Removal UCR-i (Under Color Removal) rakendamine Convert Spot Colors to Process Colors Spot-värvide teisendamine protsessivärvideks Force Overprint Mode Ületrükirežiim Apply ICC Profiles ICC profiilide rakendamine Advanced Options Muud valikud Preview... Eelvaatlus... &Print &Trüki Do not show objects outside the margins on the printed page Trükitava lehekülje veeristest väljapoole jäävaid objekte ei näidata Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Sisesta komadega eradatud arvud või märgid: * tähistab kõiki lehekülgi, 1-5 lehekülgede vahemikku, konkreetsed leheküljenumbrid vastavaid lehekülgi. Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options Alternatiivse trükkimishalduri (nt. kprinter või gtklp) kasutamine täiendavate trükkimisvalikute huvides Sets the PostScript Level. Setting to Level 1 or 2 can create huge files PostScripti taseme määramine. Tase 1 või 2 võib tekitada hiiglaslikud failid. A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Võimalus lülitada välja mõningad tsüaanist, kollasest ja magentast koosnevad halli toonid ning kasutada selle asemel musta. UCR mõjutab kõige rohkem piltide neid osi, kus valitsevad neutraalsed ja/või tumedad toonid, mis on suhteliselt lähedal hallile. Selle valiku kasutamisel võib paraneda mõningate piltide trükikvaliteet, kuid alati tuleb seda katse-eksituse meetodil ise järele proovida. UCR vähendab üleküllastuse võimalust CMY värvides. Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Sisselülitamisel teisendatakse spot-värvid komposiitvärvideks. Kui sa ei kavatse just saata trükikotta spot-värve, on mõttekas see sisse lülitada. Enables global Overprint Mode for this document, overrides object settings Sisselülitamisel kehtestatakse dokumendile üldine ületrükirežiim, mis tühistab objektide määratlused Allows you to embed ICC profiles in the print stream when color management is enabled Võimaldab värvihalduse korral põimida trükkimisandmetesse ICC profiilid This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Võimaldab konkreetselt määrata kindlaks PostScript-faili andmekandja (paberi, kile vms.) suuruse. Kui printer seda otseselt ei nõua, ei ole seda mõtet sisse lülitada. Failed to retrieve printer settings Printeri seadistuste hankimine ebaõnnestus Save as Salvestamine PostScript Files (*.ps);;All Files (*) PostScript-failid (*.ps);;Kõik failid (*) Right: Paremal: Inside: Outside: Distance for bleed from the top of the physical page Lõikevaru füüsilise lehekülje ülaservas Distance for bleed from the bottom of the physical page Lõikevaru füüsilise lehekülje allservas Distance for bleed from the left of the physical page Lõikevaru füüsilise lehekülje vasakus servas Distance for bleed from the right of the physical page Lõikevaru füüsilise lehekülje paremas servas Save As Salvestamine PrintDialogBase Setup Printer Printeri seadistused Print Destination Trükkimise sihtkoht &Options... &Valikud... &File: &Fail: C&hange... Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options Alternatiivse trükkimishalduri (nt. kprinter või gtklp) kasutamine täiendavate trükkimisvalikute huvides A&lternative Printer Command Al&ternatiivne trükkimiskäsk Co&mmand: Kä&sk: Range Vahemik Print &All &Kõik N&umber of Copies: Koo&piate arv: Print Current Pa&ge &Aktiivne lehekülg Print &Range T&rükkimisvahemik Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Sisesta komadega eradatud arvud või märgid: * tähistab kõiki lehekülgi, 1-5 lehekülgede vahemikku, konkreetsed leheküljenumbrid vastavaid lehekülgi. Options Valikud Print Normal Normaalne trükk Print Separations Trükkimine separeeritult Print in Color if Available Värvitrükk (kui võimalik) Print in Grayscale Halltoonis trükk Sets the PostScript Level. Setting to Level 1 or 2 can create huge files PostScripti taseme määramine. Tase 1 või 2 võib tekitada hiiglaslikud failid. Advanced Options Muud valikud Page Lehekülg Mirror Page(s) Horizontal Lehekülgede peegeldamine rõhtsalt Mirror Page(s) Vertical Lehekülgede peegeldamine püstiselt This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Võimaldab konkreetselt määrata kindlaks PostScript-faili andmekandja (paberi, kile vms.) suuruse. Kui printer seda otseselt ei nõua, ei ole seda mõtet sisse lülitada. Set Media Size Andmekandja suuruse määramine Clip to Page Margins Kärpimine lehekülje veeriste juures Color A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Võimalus lülitada välja mõningad tsüaanist, kollasest ja magentast koosnevad halli toonid ning kasutada selle asemel musta. UCR mõjutab kõige rohkem piltide neid osi, kus valitsevad neutraalsed ja/või tumedad toonid, mis on suhteliselt lähedal hallile. Selle valiku kasutamisel võib paraneda mõningate piltide trükikvaliteet, kuid alati tuleb seda katse-eksituse meetodil ise järele proovida. UCR vähendab üleküllastuse võimalust CMY värvides. Apply Under Color Removal UCR-i (Under Color Removal) rakendamine Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Sisselülitamisel teisendatakse spot-värvid komposiitvärvideks. Kui sa ei kavatse just saata trükikotta spot-värve, on mõttekas see sisse lülitada. Convert Spot Colors to Process Colors Spot-värvide teisendamine protsessivärvideks Enables global Overprint Mode for this document, overrides object settings Sisselülitamisel kehtestatakse dokumendile üldine ületrükirežiim, mis tühistab objektide määratlused Force Overprint Mode Ületrükirežiim Allows you to embed color profiles in the print stream when color management is enabled Apply Color Profiles Marks This creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing Crop Marks Add registration marks which are added to each separation Registration Marks This creates bleed marks which are indicated by _ . _ and show the bleed limit Bleed Marks Add color calibration bars Color Bars Offset: Indicate the distance offset for the registration marks Bleeds Top: Distance for bleed from the top of the physical page Lõikevaru füüsilise lehekülje ülaservas Left: Distance for bleed from the right of the physical page Lõikevaru füüsilise lehekülje paremas servas Bottom: Distance for bleed from the bottom of the physical page Lõikevaru füüsilise lehekülje allservas Right: Paremal: Distance for bleed from the left of the physical page Lõikevaru füüsilise lehekülje vasakus servas Use the existing bleed settings from the document preferences Use Document Bleeds Preview... Eelvaatlus... &Print &Trüki Cancel Include PDF Annotations and Links into the output. Note: PDF Forms will not be exported. Include PDF Annotations and Links This enables you to explicitly set the media size of the PostScript file. Not recommended unless requested by your printer. Clip to Printer Margins A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Võimalus lülitada välja mõningad tsüaanist, kollasest ja magentast koosnevad halli toonid ning kasutada selle asemel musta. UCR mõjutab kõige rohkem piltide neid osi, kus valitsevad neutraalsed ja/või tumedad toonid, mis on suhteliselt lähedal hallile. Selle valiku kasutamisel võib paraneda mõningate piltide trükikvaliteet, kuid alati tuleb seda katse-eksituse meetodil ise järele proovida. UCR vähendab üleküllastuse võimalust CMY värvides. PropertiesPalette Fixed Linespacing Fikseeritud reavahe Automatic Linespacing Automaatne reavahe Align to Baseline Grid Joondamine alusjoontele &X1: &X1: X&2: X&2: Y&1: Y&1: &Y2: &Y2: &X-Pos: &X-asukoht: &Width: &Laius: &Y-Pos: &Y-asukoht: &Height: &Kõrgus: Distance between columns Veergude vahe Column width Veeru laius No Style Stiil puudub Name "%1" isn't unique.<br/>Please choose another. Nimi "%1" ei ole unikaalne.<br/>Palun vali mõni muu nimi. Properties Omadused X, Y, &Z X, Y, &Z &Text &Tekst &Image P&ilt &Shape &Kujund &Line &Joon &Colors &Värvid Name Nimi Geometry Geomeetria &Rotation: Pöö&ramine: Basepoint: Baaspunkt: Level Tase Shape: Kujund: &Edit Shape... &Muuda kuju... R&ound Corners: Ümarad n&urgad: Distance of Text Teksti kaugus Colu&mns: V&eergude arv: &Gap: Va&he: To&p: Ü&lal: &Bottom: &All: &Left: &Vasakul: &Right: &Paremal: T&abulators... &Tabeldusmärgid... Path Text Properties Trajektoori teksti omadused Show Curve Trajektoori näitamine Start Offset: Alguse nihe: Distance from Curve: Kaugus trajektoorist: Fill Rule Täitmise reegel Even-Odd Paaris-paaritu Non Zero Mittenull Text &Flows Around Frame Teksti&voog ümber kasti Use &Bounding Box Üm&britsev kast &Use Contour Line Kont&uurjoon St&yle: St&iil: Lan&guage: &Keel: &Free Scaling &Vaba skaleerimine Actual X-DPI: Tegelik X-DPI: Actual Y-DPI: Tegelik Y-DPI: X-Sc&ale: X-sk&aala: Y-Scal&e: Y-s&kaala: Scale &To Frame Size Skaleerimine kas&ti suuruse järgi P&roportional P&roportsionaalne Input Profile: Sisendprofiil: Rendering Intent: Renderdamisviis: Perceptual Pertseptuaalne Relative Colorimetric Suhteline kolorimeetriline Saturation Küllastus Absolute Colorimetric Absoluutne kolorimeetriline Left Point Vasak ots End Points Otspunktid &Basepoint: &Baaspunkt: T&ype of Line: &Joone tüüp: Start Arrow: Algusnool: End Arrow: Lõppnool: Line &Width: J&oone jämedus: Ed&ges: Se&rvad: Miter Join Nurkühendus Bevel Join Längühendus Round Join Ümarühendus Flat Cap Lameots Square Cap Ruutots Round Cap Ümarots &Endings: &Otsad: Cell Lines Lahtri jooned Line at Top Joon üleval Line at the Left Joon vasakul Line at the Right Joon paremal Line at Bottom Joon all Overprinting Ületrükk Knockout Väljajätmine Overprint Ületrükk % % pt pt Name of selected object Valitud objekti nimi Horizontal position of current basepoint Aktiivse baaspunkti asukoht rõhtteljel Vertical position of current basepoint Aktiivse baaspunkti asukoht püstteljel Width Laius Height Kõrgus Rotation of object at current basepoint Objekti pööramine aktiivse baaspunkti suhtes Point from which measurements or rotation angles are referenced Punkt, millest arvestatakse mõõte või pööramisnurka Select top left for basepoint Vali baaspunktiks ülemine vasak punkt Select top right for basepoint Vali baaspunktiks ülemine parem punkt Select bottom left for basepoint Vali baaspunktiks alumine vasak punkt Select bottom right for basepoint Vali baaspunktiks alumine parem punkt Select center for basepoint Vali baaspunktiks keskpunkt Flip Horizontal Peegelda rõhtsalt Flip Vertical Peegelda püstiselt Move one level up Liiguta üks tase ettepoole Move one level down Liiguta üks tase tahapoole Move to front Liiguta kõige ette Move to back Liiguta kõige taha Indicates the level the object is on, 0 means the object is at the bottom Tähistab taset, millel objekt asub. 0 tähendab, et objekt asub kõige all. Lock or unlock the object Lukusta objekt või eemalda lukustus Lock or unlock the size of the object Lukusta objekti suurus või eemalda lukustus Enable or disable printing of the object Luba või keela objekti trükkimine Make text in lower frames flow around the object shape Sunnib allpool asuvate kastide teksti kulgema ümber objekti Use a surrounding box instead of the frame's shape for text flow Tekstivoo määramiseks kasutatakse objektipiirete asemel neid ümbritsevat kasti Use a second line originally based on the frame's shape for text flow Tekstivoo jaoks kasutatakse teist joont, mis tugineb kastipiiretele Font of selected text or object Valitud teksti või objekti font Font Size Fondi suurus Offset to baseline of characters Nihe märkide alusjoone suhtes Scaling width of characters Märkide skaleerimislaius Scaling height of characters Märkide skaleerimiskõrgus Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color. Teksti äärejoone ja/või varju värv (sõltuvalt valikust). Kui mõlemad on valitud, kasutatakse üht ja sama värvi. Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color. Valitud teksti värv. Kui sisse on lülitatud kontuuriefekt, on see täidise värv. Kui sisse on lülitatud varjuefekt, on see kõige ülemine värv. Saturation of color of text stroke Teksti äärejoone värvi küllastus Saturation of color of text fill Teksti täidise värvi küllastus Right to Left Writing Kirjutamine paremalt vasakule Manual Tracking Märkide koondamine Line Spacing Reavahe Click to select the line spacing mode Klõpsa reavahe režiimi valimiseks Style of current paragraph Aktiivse lõigu stiil Hyphenation language of frame Tekstikastis kasutatav keel Change settings for left or end points Vasaku või otspunktide seadistuste muutmine Pattern of line Joone muster Thickness of line Joone jämedus Type of line joins Jooneühenduste tüüp Type of line end Jooneotste tüüp Line style of current object Aktiivse objekti joonestiil Choose the shape of frame... Vali kasti kuju... Edit shape of the frame... Muuda kasti kuju... Set radius of corner rounding Määra nurkade ümardamise raadius Number of columns in text frame Veergude arv tekstikastis Switches between Gap or Column width Vahe või veerulaiuse lülitamine Distance of text from top of frame Teksti kaugus kasti ülaservast Distance of text from bottom of frame Teksti kaugus kasti alaservast Distance of text from left of frame Teksti kaugus kasti vasakust servast Distance of text from right of frame Teksti kaugus kasti paremast servast Edit tab settings of text frame... Muuda tekstikasti tabeldusmärke... Allow the image to be a different size to the frame Võimaldab pildil olla kastist erineva suurusega Horizontal offset of image within frame Pildi rõhtsuunaline nihe kastis Vertical offset of image within frame Pildi püstsuunaline nihe kastis Resize the image horizontally Pildi suuruse muutmine rõhtsuunas Resize the image vertically Pildi suuruse muutmine püstsuunas Keep the X and Y scaling the same X- ja Y-skaala hoitakse võrdsena Keep the aspect ratio Säilitatakse proportsioon Make the image fit within the size of the frame Pilt sobitatakse kasti suurusega Use image proportions rather than those of the frame Kasti proportsioonide asemel kasutatakse pildi proportsioone Source profile of the image Pildi lähteprofiil Rendering intent for the image Pildi renderdamisviis Gap: Vahe: Width: Laius: Text &Flow Around Frame Teksti&voog ümber kasti Disabled Keelatud Use Frame &Shape Kasti ku&jundi kasutamine Image Effects Pildiefektid Extended Image Properties Pildi laiendatud omadused Disable text flow from lower frames around object Alumiste kastide teksti kulgemine ümber objekti keelatakse Use the frame shape for text flow of text frames below the object. Kasti kujundi kasutamine objekti all asuvate tekstikastide tekstivoo jaoks. Use the bounding box, which is always rectangular, instead of the frame's shape for text flow of text frames below the object. Kasti kujundi asemel kasutatakse alati nelinurkset ümbritsevat kasti objekti all asuvate tekstiraamide tekstivoo jaoks. Use a second line originally based on the frame's shape for text flow of text frames below the object. Algselt kasti kujundil põhineva teise joone kasutamine objekti all asuvate tekstikastide tekstivoo jaoks. Transparency Settings Läbipaistvuse seadistused &Group &Rühmitamine Opacity: Läbipaistmatus: Blend Mode: Ühtesulamise režiim: Normal Normaalne Darken Tumendamine Lighten Helendamine Multiply Korrutamine Screen Ekraan Overlay Ülekatmine Hard Light Külm valgus Soft Light Soe valgus Difference Lahutamine Exclusion Väljajätmine Color Dodge Värvi helestamine Color Burn Värvi tumestamine Hue Toon Color Värv Group the selected objects Valitud objektide rühmitamine Destroys the selected group Kustutab valitud rühma Auto Automaatne When chosen, the contour line can be edited with the Edit Shape Tool on the palette further above. When edited via the shape palette, this becomes a second separate line originally based on the frame's shape for text flow of text frames below the object. T Default Stair Step Skew Flip Text Type: Tüüp: Use Image Clip Path Paragraph St&yle: Character St&yle: Optical Margins: Word Tracking Min: Norm: Glyph Extension Max: Use the clipping path of the image Paragraph style of currently selected text or paragraph Character style of currently selected text or paragraph Remove Direct Paragraph Formatting Remove Direct Character Formatting Minimal width of spaces between words Normal width of spaces between words Minimal shrinkage of glyphs for justification Maximal extension of glyphs for justification Uses hanging punctuation and margin kerning to achieve nicer looking columns Enable or disable exporting of the object Custom Kohandatud &Edit... &Redigeeri... First Line Offset Maximum Ascent Font Ascent Color & Effects Advanced Settings Style Settings Stiiliseadistused Baseline Ungroup the selected group Select the line spacing mode. Set the height of the first line of the text frame to use the tallest height of the included characters Set the height of the first line of text frame to use the full ascent of the font(s) in use Set the height of the first line of the text frame to the specified line height &Page Number: PythonConsole &Open... &Ava... &Save &Salvesta Save &As... Salvesta &kui... &Exit &Välju &File &Fail &Run &Käivita Run As &Console Kä&ivita konsoolina &Save Output... &Salvesta väljund... &Script &Skript Scribus Python Console Scribuse Pythoni konsool This is derived from standard Python console so it contains some limitations esp. in the case of whitespaces. Please consult Scribus manual for more informations. Selle aluseks on standardne Pythoni konsool, mistõttu selles on teatud piiranguid, eriti tühimärkide kasutamises. Täpsemalt räägib sellest Scribuse käsiraamat. Script Console Skriptikonsool Write your commands here. A selection is processed as script Kirjuta siia oma käsud. Valikut töödeldakse skriptina. Output of your script Skripti väljund Python Scripts (*.py) Pythoni skriptid (*.py) Open Python Script File Pythoni skriptifaili avamine Save the Python Commands in File Pythoni käskude salvestamine failina Warning Hoiatus Text Files (*.txt) Tekstifailid (*.txt) Save Current Output Aktiivse väljundi salvestamine Python Scripts (*.py *.PY) Pythoni skriptid (*.py *.PY) Line: %1 Column: %2 Rida: %1 Veerg : %2 Col: %1 Row: %2/%3 Ctrl+O Ctrl+S &Quit &Välju This is a standard Python console with some known limitations. Please consult the Scribus Scripter documentation for futher information. QColorDialog Hu&e: &Toon: &Sat: &Küll: &Val: &Väär: &Red: &Punane: &Green: &Roheline: Bl&ue: &Sinine: A&lpha channel: Al&fakanal: &Basic colors &Baasvärvid &Custom colors &Kohandatud värvid &Define Custom Colors >> &Defineeri kohandatud värvid >> OK OK Cancel Loobu &Add to Custom Colors Lis&a kohandatud värvidesse Select color Värvi valik QFileDialog Copy or Move a File Faili kopeerimine või liigutamine Read: %1 Lugeda: %1 Write: %1 Kirjutada: %1 File &name: Faili &nimi: File &type: Faili &tüüp: One directory up Üks kataloog ülespoole Cancel Loobu All Files (*) Kõik failid (*) Name Nimi Size Suurus Type Tüüp Date Kuupäev Attributes Atribuudid OK OK Look &in: &Asukoht: Back Tagasi Create New Folder Loo uus kataloog List View Nimekirjavaade Detail View Detailne vaade Preview File Info Faili info eelvaatlus Preview File Contents Faili sisu eelvaatlus Read-write Lugeda/kirjutada Read-only Ainult lugemiseks Write-only Ainult kirjutamiseks Inaccessible Ligipääsmatu Symlink to File Nimeviit failile Symlink to Directory Nimeviit kataloogile Symlink to Special Nimeviit spetsiaalsele failile File Fail Dir Kataloog Special Spetsiaalne fail Open Avamine Save As Salvestamine &Open &Ava &Save &Salvesta &Rename &Nimeta ümber &Delete K&ustuta R&eload &Laadi uuesti Sort by &Name &Nime järgi Sort by &Size &Suuruse järgi Sort by &Date &Kuupäeva järgi &Unsorted S&orteerimata Sort Sorteerimine Show &hidden files Näita &peidetud faile the file fail the directory kataloog the symlink nimeviit Delete %1 Kustutamine: %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> <qt>Kas tõesti kustutada %1 "%2"?</qt> &Yes &Jah &No &Ei New Folder 1 Uus kataloog 1 New Folder Uus kataloog New Folder %1 Uus kataloog %1 Find Directory Kataloogi otsimine Directories Kataloogid Save Salvesta Error Viga %1 File not found. Check path and filename. %1 Faili ei leitud. Palun kontrolli asukohta ja nime. All Files (*.*) Kõik failid (*.*) Select a Directory Kataloogi valik Directory: Kataloog: QFontDialog &Font &Font Font st&yle Fondi st&iil &Size &Suurus Effects Efektid Stri&keout Läbi &kriipsutatud &Underline Allajoonit&ud &Color &Värv Sample Näide Scr&ipt K&iri OK OK Apply Rakenda Cancel Loobu Close Sulge Select Font Fondi valik QLineEdit Clear Puhasta Select All Vali kõik &Undo &Võta tagasi &Redo &Tee uuesti Cu&t &Lõika &Copy &Kopeeri &Paste &Aseta QMainWindow Line up Joonda Customize... Kohanda... QMessageBox <h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for multiplatform GUI &amp; application development.</p><p>Qt provides single-source portability across MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, and all major commercial Unix variants.<br>Qt is also available for embedded devices.</p><p>Qt is a Trolltech product. See <tt>http://www.trolltech.com/qt/</tt> for more information.</p> <h3>Qt info</h3><p>See programm kasutab Qt versiooni %1.</p><p>Qt on C++ tööriistakomplekt multiplatvormse GUI &amp; rakenduste arendamiseks.</p><p>Qt kasutamine kindlustab lähtekoodi porditavuse MS&nbsp;Windowsi, Mac&nbsp;OS&nbsp;X, Linuxi ja kõigi peamiste Unixi platvormide vahel.<br>Qt on saadaval ka integreeritud seadmete tarbeks.</p><p>Qt on firma Trolltech toode. Kui soovid rohkem infot, vaata <tt>http://www.trolltech.com/qt/</tt>.</p> QObject Copy #%1 of Koopia nr. %1 - Background Taust Importing text Teksti import All Supported Formats Kõik toetatud vormingud All Files (*) Kõik failid (*) Afrikaans Afrikaani Albanian Albaania Basque Baski Bulgarian Bulgaaria Brazilian Brasiilia Catalan Katalaani Chinese Hiina Croatian Horvaadi Czech Tšehhi Danish Taani Dutch Hollandi English Inglise English (British) Inglise (Briti) Esperanto Esperanto German Saksa German (Trad.) Saksa (tradits.) Finnish Soome French Prantsuse Galician Galeegi Greek Kreeka Hungarian Ungari Indonesian Indoneesia Italian Itaalia Japanese Jaapani Korean Korea Lithuanian Leedu Luxembourgish Letseburgi Norwegian (Bokmaal) Norra (Bokmaal) Norwegian (Nnyorsk) Norra (Nynorsk) Norwegian Norra Polish Poola Portuguese Portugali Portuguese (BR) Portugali (BR) Russian Vene Swedish Rootsi Spanish Hispaania Spanish (Latin) Hispaania (Lad-Am) Slovak Slovaki Slovenian Sloveeni Serbian Serbia Thai Tai Turkish Türgi Ukranian Ukraina Welsh Uelsi Scribus Crash Scribuse krahh Scribus crashes due to Signal #%1 Scribust tabas krahh signaaliga #%1 &OK &OK Scribus crashes due to the following exception : %1 Scribust tabas krahh järgmise erindi tõttu: %1 Page Lehekülg Master Page Leheküljetoorik Custom Kohandatud 4A0 4A0 2A0 2A0 Comm10E Comm10E DLE DLE Could not open output file %1 Väljundfaili %1 avamine ebaõnnestus Output stream not writeable Väljundvoog ei ole kirjutamisõigusega Verification of settings failed: %1 Seadistuste kontroll ebaõnnestus: %1 Could not open input file %1 Sisendfaili %1 avamine ebaõnnestus Unable to read settings XML: Seadistuste XML-i lugemine ebaõnnestus: %1 (line %2 col %3) Load PDF settings %1 (rida %2 veerg %3) Unable to read settings XML: %1 Seadistuste XML-i lugemine ebaõnnestus: %1 null root node Load PDF settings null juursõlm <pdfVersion> invalid Load PDF settings <pdfVersion> vigane found %1 <%2> nodes, need 1. Load PDF settings leiti %1 <%2> sõlme, vaja on 1. unexpected null <%2> node Load PDF settings ootamatu null <%2> sõlm node <%1> not an element Load PDF settings sõlm <%1> ei ole element element <%1> lacks `value' attribute Load PDF settings elemendil <%1> puudub atribuut `value' element <%1> value must be `true' or `false' Load PDF settings elemendi <%1> väärtus peab olema `true' või `false' element <lpiSettingsEntry> lacks `name' attribute Load PDF settings elemendil <lpiSettingsEntry> puudub atribuut `name' All Kõik Exporting PostScript File PostScript-faili eksport Printing File Faili trükkimine Black Must Cyan Tsüaan Magenta Magenta Yellow Kollane Freetype2 library not available Freetype2 teek pole kättesaadav Font %1(%2) is broken Font %1(%2) on vigane Font %1 is broken (read stream), no embedding Font %1 on vigane (voo lugemine), ei põimita Font %1 has broken glyph %2 (charcode %3) Fondis %1 on vigane glüüf %2 (kood %3) Font %1 is broken and will be discarded Font %1 on vigane ja jäetakse kõrvale Font %1 cannot be read, no embedding Fondi %1 lugemine ebaõnnestus, ei põimita Creating Font Cache Fondipuhvri loomine Font %1 is broken, discarding it Font %1 on vigane, jäetakse kõrvale Failed to load font %1 - font type unknown Fondi %1 laadimine ebaõnnestus - fondi tüüp on tundmatu New Font found, checking... Leiti uus font, kontrollitakse... Modified Font found, checking... Leiti muudetud font, kontrollitakse... Font %1 loaded from %2(%3) Font %1 laaditud failist %2(%3) Font %1(%2) is duplicate of %3 Font %1(%2) on %3 kloon Loading font %1 (found using fontconfig) Fondi %1 laadimine (leiti fontconfig'i abil) Failed to load a font - freetype2 couldn't find the font file Fondi laadimine ebaõnnestus - freetype2 ei leidnud fondifaili Reading Font Cache Fondipuhvri lugemine Writing updated Font Cache Uuendatud fondipuhvri kirjutamine Searching for Fonts Fontide otsimine Font %1 has invalid glyph %2 (charcode %3), discarding it Fondis %1 on vigane glüüf %2 (kood %3), jäetakse kõrvale extracting face %1 from font %2 (offset=%3, nTables=%4) tüübi %1 ekstraktimine fondist %2 (sihtaadress=%3, nTables=%4) memcpy header: %1 %2 %3 memcpy päis: %1 %2 %3 table '%1' tabel '%1' memcpy table: %1 %2 %3 memcpy tabel: %1 %2 %3 memcpy offset: %1 %2 %3 memcpy suhtaadress: %1 %2 %3 Scribus Development Version Scribuse arendusversioon You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.3 or lower. The process of saving will make this file unusable again in Scribus 1.2.3 unless you use File->Save As. Are you sure you wish to proceed with this operation? Kasutad Scribus 1.3.x arendusversiooni. Redigeeritav dokument on loodud Scribuse versiooniga 1.2.3 või vanemaga. Salvestamisel ei saa seda enam Scribus 1.2.3 või vanemas kasutada, kui sa ei vali just Fail->Salvesta kui. Kas soovid kindlasti jätkata? <p>You are trying to import more pages than there are available in the current document counting from the active page.</p>Choose one of the following:<br><ul><li><b>Create</b> missing pages</li><li><b>Import</b> pages until the last page</li><li><b>Cancel</b></li></ul> <p>Üritad importida rohkem lehekülgi, kui neid leidub aktiivses dokumendis alates aktiivsest leheküljest.</p>Vali üks järgmistest võimalustest:<br><ul><li><b>Loo</b> puuduvad leheküljed</li><li><b>Impordi</b> leheküljed viimase leheküljeni</li><li><b>Loobu</b></li></ul> C&reate &Loo &Import &Impordi The changes to your document have not been saved and you have requested to revert them. Do you wish to continue? Dokumenti tehtud muudatused pole salvestatud, nüüd aga soovisid need tühistada. Kas soovid jätkata? Initializing... Initsialiseerimine... Save as Salvestamine pt pt mm mm in in p p cm cm c c pt pt mm mm in in p p cm cm c c Points (pt) Punktid (pt) Millimeters (mm) Millimeetrid (mm) Inches (in) Tollid (in) Picas (p) Pikad (p) Centimeters (cm) Sentimeetrid (cm) Cicero (c) Tsiitserod (c) File exists Fail on olemas A file named '%1' already exists.<br/>Do you want to replace it with the file you are saving? Fail nimega '%1' on juba olemas.<br/>Kas asendada see failiga, mida soovisid salvestada? &Replace &Asenda page page export lk Barcode Generator Ribakoodi generaator Color Wheel Värviratas Font Preview Fontide eelvaatlus My Plugin Minu plugin New From Template Uus mallist Document Template: Dokumendimall: Newsletters Ajalehed Brochures Brošüürid Catalogs Almanahhid Flyers Lendlehed Signs Sildid Cards Kaardid Letterheads Kirjablanketid Envelopes Ümbrikud Business Cards Visiitkaardid Calendars Kalendrid Advertisements Reklaamid Labels Etiketid Menus Menüüd Programs Programmid PDF Forms PDF-vormid PDF Presentations PDF-esitlused Magazines Ajakirjad Posters Postrid Announcements Kuulutused Text Documents Tekstidokumendid Folds Voldikud Media Cases Ümbrised Own Templates Enda mallid Export As Image Eksport pildina Save as Image Salvestamine pildina Error writing the output file(s). Viga väljundfaili kirjutamisel. Export successful. Eksport õnnestus. File exists. Overwrite? Fail on olemas. Kas kirjutada üle? exists already. Overwrite? on juba olemas. Kas kirjutada üle? Yes Jah No Ei Yes all Jah kõigile PS/EPS Importer PS/EPS-i importija All Supported Formats (*.eps *.EPS *.ps *.PS);; Kõik toetatud vormingud (*.eps *.EPS *.ps *.PS);; Open Avamine Save As Template Salvestamine mallina Cannot get a color with an empty name. python error Nimeta värvi hankimine ei ole võimalik. Color not found. python error Värvi ei leitud. Cannot change a color with an empty name. python error Nimeta värvi muutmine ei ole võimalik. Color not found in document. python error Dokumendist ei leitud värvi. Color not found in default colors. python error Värvi ei leitud vaikimisi värvide seast. Cannot create a color with an empty name. python error Nimeta värvi ei ole võimalik luua. Cannot delete a color with an empty name. python error Nimeta värvi ei ole võimalik kustutada. Cannot replace a color with an empty name. python error Nimeta värvi ei ole võimalik asendada. firstPageOrder is bigger than allowed. python error firstPageOrder on suurem kui lubatud. Failed to open document. python error Dokumendi avamine ebaõnnestus. Failed to save document. python error Dokumendi salvestamine ebaõnnestus. Unit out of range. Use one of the scribus.UNIT_* constants. python error Ühik väljaspool piire. Kasuta mõnda scribus.UNIT_* konstanti. Color not found - python error python error Värvi ei leitud - Pythoni viga Argument must be page item name, or PyCObject instance Argument peab olema lehekülje elemendi nimi või PyCObject'i eksemplar Property not found Omadust ei leitud Child not found Järglast ei leitud Couldn't convert result type '%1'. Tulemuse tüübi '%1' teisendamine ebaõnnestus. Property type '%1' not supported Omaduse tüüp '%1' ei ole toetatud Couldn't convert '%1' to property type '%2' '%1' teisendamine omaduse tüübiks '%2' ebaõnnestus Types matched, but setting property failed. Tüübid klapivad, aga omaduse määramine ebaõnnestus. Target is not an image frame. python error Sihtmärk ei ole pildikast. Specified item not an image frame. python error Määratud element ei ole pildikast. Cannot group less than two items python error Vähem kui kaht elementi ei saa rühmitada Can't group less than two items python error Vähem kui kaht elementi ei saa rühmitada Need selection or argument list of items to group python error Rühmitamiseks on vajalik valik või elementide nimekiri Cannot scale by 0%. python error 0% võrra ei saa skaleerida. Font not found. python error Fonti ei leitud. Cannot render an empty sample. python error Tühja eksemplari ei saa renderdada. Unable to save pixmap scripter error Pikselrastri salvestamine ebaõnnestus Cannot have an empty layer name. python error Kihil ei saa nimi puududa. Layer not found. python error Kihti ei leitud. Cannot remove the last layer. python error Viimast kihti ei saa eemaldada. Cannot create layer without a name. python error Nimeta kihti ei ole võimalik luua. An object with the requested name already exists. python error Soovitud nimega objekt on juba olemas. Point list must contain at least two points (four values). python error Punktide nimekiri peab sisaldama vähemalt kaht punkti (neli väärtust). Point list must contain an even number of values. python error Punktide nimekiri peab sisaldama paarisarvu väärtusi. Point list must contain at least three points (six values). python error Punktide nimekiri peab sisaldama vähemalt kolme punkti (kuus väärtust). Point list must contain at least four points (eight values). python error Punktide nimekiri peab sisaldama vähemalt nelja punkti (kaheksa väärtust). Point list must have a multiple of six values. python error Punktide nimekiri peab sisaldama x korda kuut väärtust. Object not found. python error Objekti ei leitud. Style not found. python error Stiili ei leitud. Cannot set style on a non-text frame. python error Stiili saab määrata ainult tekstikastile. Failed to save EPS. python error EPS-i salvestamine ebaõnnestus. Page number out of range. python error Leheküljenumber väljub piiridest. Given master page name does not match any existing. python error Määratud leheküljetooriku nimele ei vasta ükski olemasolev toorik. argument is not list: must be list of float values. python error argument ei ole nimekiri: peab olema murdarvväärtuste nimekiri. argument contains non-numeric values: must be list of float values. python error argument sisaldab mittearvulisi väärtusi: peab olema murdarvväärtuste nimekiri. argument contains no-numeric values: must be list of float values. python error argument sisaldab mittearvulisi väärtusi: peab olema murdarvväärtuste nimekiri. Line width out of bounds, must be 0 <= line_width <= 12. python error Joone jämedus väljub piiridest, peab olema 0 <= joone_jämedus <= 12. Line shade out of bounds, must be 0 <= shade <= 100. python error Joone varjund väljub piiridest, peab olema 0 <= varjund <= 100. Fill shade out of bounds, must be 0 <= shade <= 100. python error Täidise varjund väljub piiridest, peab olema 0 <= varjund <= 100. Corner radius must be a positive number. python error Nurga raadius peab olema positiivne arv. Line style not found. python error Joone stiili ei leitud. Cannot get font size of non-text frame. python error Mitte-tekstikasti fondi suuruse hankimine ebaõnnestus. Cannot get font of non-text frame. python error Mitte-tekstikasti fondi hankimine ebaõnnestus. Cannot get text size of non-text frame. python error Mitte-tekstikasti teksti suuruse hankimine ebaõnnestus. Cannot get column count of non-text frame. python error Mitte-tekstikasti veergude arvu hankimine ebaõnnestus. Cannot get line space of non-text frame. python error Mitte-tekstikasti reavahe hankimine ebaõnnestus. Cannot get column gap of non-text frame. python error Mitte-tekstikasti veergude vahe hankimine ebaõnnestus. Cannot get text of non-text frame. python error Mitte-tekstikasti teksti hankimine ebaõnnestus. Cannot set text of non-text frame. python error Mitte-tekstikasti teksti määramine ebaõnnestus. Cannot insert text into non-text frame. python error Teksti lisamine mitte-tekstikasti ebaõnnestus. Insert index out of bounds. python error Lisamise indeks väljub piiridest. Alignment out of range. Use one of the scribus.ALIGN* constants. python error Joondus väljub piiridest. Kasutada mõnda scribus.ALIGN* konstanti. Cannot set text alignment on a non-text frame. python error Mitte-tekstikasti teksti joonduse määramine ebaõnnestus. Font size out of bounds - must be 1 <= size <= 512. python error Fondi suurus väljub piiridest, peab olema 1 <= suurus <= 512. Cannot set font size on a non-text frame. python error Mitte-tekstikasti fondi suuruse määramine ebaõnnestus. Cannot set font on a non-text frame. python error Mitte-tekstikasti fondi määramine ebaõnnestus. Line space out of bounds, must be >= 0.1. python error Reavahe väljub piiridest, peab olema >=0,1. Cannot set line spacing on a non-text frame. python error Mitte-tekstikasti reavahe määramine ebaõnnestus. Column gap out of bounds, must be positive. python error Veergude vahe väljub piiridest, peab olema positiivne. Cannot set column gap on a non-text frame. python error Mitte-tekstikasti veergude vahe määramine ebaõnnestus. Column count out of bounds, must be > 1. python error Veergude arv väljub piiridest, peab olema > 1. Cannot set number of columns on a non-text frame. python error Mitte-tekstikasti veergude arvu määramine ebaõnnestus. Selection index out of bounds python error Valiku indeks väljub piiridest Cannot select text in a non-text frame python error Teksti valimine mitte-tekstikastis ebaõnnestus Cannot delete text from a non-text frame. python error Teksti kustutamine mitte-tekstikastis ebaõnnestus. Cannot set text fill on a non-text frame. python error Teksti täidise määramine mitte-tekstikastis ebaõnnestus. Cannot set text stroke on a non-text frame. python error Teksti äärejoone määramine mitte-tekstikastis ebaõnnestus. Cannot set text shade on a non-text frame. python error Teksti varjundi määramine mitte-tekstikastis ebaõnnestus. Can only link text frames. python error Linkida saab ainult tekstikaste. Target frame must be empty. python error Sihtkast peab olema tühi. Target frame links to another frame. python error Sihtkast on seotud teise kastiga. Target frame is linked to by another frame. python error Sihtkast on seotud teise kasti külge. Source and target are the same object. python error Lähte- ja sihtkoht on üks ja sama objekt. Cannot unlink a non-text frame. python error Mitte-tekstikasti linkimist ei saa eemaldada. Object is not a linked text frame, can't unlink. python error Objekt ei ole lingitud tekstikast, lingi eemaldamine ei ole võimalik. Object the last frame in a series, can't unlink. Unlink the previous frame instead. python error Objekt on viimane kast jadas, linki ei saa eemaldada. Selle asemel võib lingi eemaldada eelmiselt kastilt. Cannot convert a non-text frame to outlines. python error Mitte-tekstikasti ei saa kontuuriks teisendada. Only text frames can be checked for overflowing python error Ülejooksmist saab kontrollida ainult tekstikastides Can't set bookmark on a non-text frame python error Mitte-tekstikastile ei saa järjehoidjat seada Can't get info from a non-text frame python error Mitte-tekstikastist ei õnnestunud infot hankida The filename must be a string. python error Faili nimi peab olema string. The filename should not be empty string. python error Faili nimi ei tohi olla tühi string. Cannot delete image type settings. python error Pilditüübi seadistusi ei saa kustutada. The image type must be a string. python error Pilditüüp peab olema string. 'allTypes' attribute is READ-ONLY python error Atribuut 'allTypes' on AINULT LUGEMISEKS Failed to export image python error Pildi eksport ebaõnnestus &Execute Script... Kä&ivita skript... Show &Console &Näita konsooli &About Script... Sk&ripti info... &Script &Skript &Scribus Scripts &Scribuse skriptid &Recent Scripts &Viimati kasutatud skriptid About Script Skripti info Scripter Skriptija Scribus Python interface module This module is the Python interface for Scribus. It provides functions to control scribus and to manipulate objects on the canvas. Each function is documented individually below. A few things are common across most of the interface. Most functions operate on frames. Frames are identified by their name, a string - they are not real Python objects. Many functions take an optional (non-keyword) parameter, a frame name. Many exceptions are also common across most functions. These are not currently documented in the docstring for each function. - Many functions will raise a NoDocOpenError if you try to use them without a document to operate on. - If you do not pass a frame name to a function that requires one, the function will use the currently selected frame, if any, or raise a NoValidObjectError if it can't find anything to operate on. - Many functions will raise WrongFrameTypeError if you try to use them on a frame type that they do not make sense with. For example, setting the text color on a graphics frame doesn't make sense, and will result in this exception being raised. - Errors resulting from calls to the underlying Python API will be passed through unaltered. As such, the list of exceptions thrown by any function as provided here and in its docstring is incomplete. Details of what exceptions each function may throw are provided on the function's documentation, though as with most Python code this list is not exhaustive due to exceptions from called functions. Scribuse Pythoni liidese moodul See on Scribuse Pythoni liidese moodul. Selle funktsioonid lubavad juhtida Scribust ja käsitseda objekte. Kõik funktsioonid on allpool dokumenteeritud. Mõned asjad iseloomustavad suuremat osa liidesest. Enamik funktsioone toimib kastides. Kaste tuvastatakse nende nime, stringi järgi - need ei ole reaalsed Pythoni objektid. Paljud funktsioonid kasutavad mittekohustusliku (mitte-võtmesõna) parameetrina kasti nime. Paljud erindid on samuti enamikule funktsioonidest ühised. Need ei ole praegu iga funktsiooni docstringis dokumenteeritud. - Paljud funktsioonid annavad tulemuseks NoDocOpenError, kui üritad neid kasutada ilma dokumenti ette andmata. - Kui jätta kasti nimi andmata funktsioonile, mis seda vajab, kasutab funktsioon parajasti aktiivset kasti, kui see on olemas, või annab tulemuseks NoValidObjectError, kui ei leia midagi, kus tegutsema asuda. - Paljud funktsioonid annavad tulemuseks WrongFrameTypeError, kui püüad neid kasutada sellist tüüpi kastis, kus nad pole ette nähtud. Näiteks ei ole mingit mõtet määrata pildikastis teksti värvi, mille puhul ongi tulemuseks mainitud erind. - Vead, mis tekivad väljakutsetest taustal töötavale Pythoni API-le, edastatakse muutmatult. Seepärast on funktsioonide teatatud erindite loend siin ja vastavas docstringis ebatäielik. Üksikasju, milliseid erindeid võib iga funktsioon teatada, leiab funktsiooni dokumentatsioonis, ehkki, nagu Pythoni koodi puhul üldiselt, ei ole see loend täielik väljakutsutud funktsioonide erindite tõttu. Custom (optional) configuration: short words plugin Kohandatud (täiendav) seadistus: Standard configuration: short words plugin Standardseadistus: Short Words Lühendid Short Words processing. Wait please... short words plugin Lühendite töötlemine. Palun oota... Short Words processing. Done. short words plugin Lühendite töötlemine. Tehtud. SVG Export SVG eksport SVG-Images (*.svg *.svgz);;All Files (*) SVG pildid (*.svg *.svgz);;Kõik failid (*) SVG-Images (*.svg);;All Files (*) SVG pildid (*.svg);;Kõik failid (*) Warning Hoiatus Do you really want to overwrite the File: %1 ? Kas tõesti kirjutada üle fail: %1? SVG Import SVG import Old .sla format support Vana .sla-vormingu toetus OpenOffice.org Draw Importer OpenOffice.org Draw' importija OpenOffice.org Draw (*.sxd *.odg);;All Files (*) OpenOffice.org Draw (*.sxd *.odg);;Kõik failid (*) Comma Separated Value Files CSV-failid CSV_data CSV_andmed CSV_header CSV_päis Word Documents Word'i dokumendid HTML Files HTML-failid html html External Links Välised lingid OpenDocument Text Documents OpenDocument tekstidokumendid Palm PDB Documents PDB Importer Palm PDB dokumendid PDB_data PDB Importer PDB_andmed PDB Import PDB Importer PDB import Could not open file %1 PDB Importer Faili %1 avamine ebaõnnestus This file is not recognized as a PDB document propably. Please, report this as a bug if you are sure it is one. PDB Importer See fail ei paista olevat PDB dokument. Kui arvad, et see siiski on, anna palun veast teada. OpenOffice.org Writer Documents OpenOffice.org Writer'i dokumendid Text Filters Tekstifiltrid Text Files Tekstifailid Arabic Araabia font %1 font %1(sp) size %1 suurus %1 +style +stiil +color +värv +underline +allajoonitud -underline -allajoonitud +strikeout +läbikriipsutatud -strikeout -läbikriipsutatud +shadow +vari -shadow -vari +outline +kontuur -outline -kontuur -tracking -koondamine +baseline %1 +alusjoon %1 +stretch +laiendamine parent= %1 eellane= %1 unnamed nimetu Dzongkha Dzongkha Estonian Eesti Font %1 is broken (no Face), discarding it Font %1 on vigane (Face puudub), jäetakse kõrvale Latin Latin Icelandic Islandi Norwegian (BokmÃ¥l) Norra (BokmÃ¥l) Romanian Rumeenia Quarto Quarto Foolscap Foolscap Letter Letter Govt. Letter Govt. Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium Medium Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E %1 may be corrupted : missing resolution tags %1 võib olla vigane: lahutussildid puuduvad Font %1 has broken glyph %2 Fondis %1 on vigane glüüf %2 Transparency out of bounds, must be 0 <= transparency <= 1. python error Läbipaistvus väljub piiridest, peab olema 0 <= läbipaistvus <= 1. Blendmode out of bounds, must be 0 <= blendmode <= 15. python error Ühtesulamine väljub piiridest, peab olema 0 <= ühtesulamine <= 15. Scribus 1.2.x Support Scribus 1.2.x toetus Scribus 1.3.4 Support Scribus 1.3.4 toetus Scribus 1.3.0->1.3.3.2 Support Scribus 1.3.0->1.3.3.2 toetus This file is not recognized as a PDB document. Please, report this as a bug if you are sure it is one. PDB Importer See fail ei paista olevat PDB-dokument. Kui oled selles siiski kindel, anna teada veast. Cannot get number of lines of non-text frame. python error Mittetekstikasti ridade arvu ei õnnestu hankida. You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation? Sul töötab Scribus 1.3.x arendusversioon. Dokument, millega töötad, on loodud Scribus 1.2.x abil. Faili salvestamine versioonis 1.3.x muudab võimatuks selle edasise redigeerimise Scribus 1.2.x versioonides. Kui soovid säilitada võimaluse redigeerida faili versioonis 1.2.x, salvesta fail teise nimega ning redigeeri edaspidi uue nimega faili, mis jätab originaali puutumata. Kas oled kindel, et soovid jätkata? +tracking %1 +koondamine %1 +baseline %1 +alusjoon %1 Breton Bretooni English (American) Inglise (Ameerika) %1 may be corrupted : missing or wrong resolution tags %1 võib olla vigane: lahutussildid puuduvad või on väärad The Font(s): %1 are not available. They have been replaced by "Courier" Therefore the image may be not correct Font/fondid: %1 ei ole saadaval. Need asendati fondiga "Courier". Pilt ei pruugi seetõttu olla korrektne English (Australian) German (Swiss) Hebrew Heebrea Scribus 1.3.0->1.3.3.7 Support Scribus 1.3.0->1.3.3.7 toetus Font %1 has broken metrics in file %2, ignoring metrics Chinese (Trad.) Scribus 1.3.0->1.3.3.x Support Scribus 1.2.x toetus {1.3.0->1.3.3.?} Copy of %1 (%2) Image Pilt Text Tekst Line Joon Polygon Hulknurk Polyline Kompleksjoon PathText Trajektooritekst % % Khmer Lao Vietnamese An error occurred while initializing icc transforms Output profile is not supported WMF Import New Layer Uus kiht Adobe Illustrator Importer Imposition PostScript Importer %1;;All Files (*) Do you really want to overwrite the file: %1 ? Encapsulated PostScript GIF JPEG Pattern Files PDF Document PNG PostScript PostScript Adobe Photoshop TIFF XPM Windows Meta File Scalable Vector Graphics Skaleeritav vektorgraafika Adobe Illustrator Valid metrics were found for font %1, using metrics in file %2 No metrics found for font %1, ignoring font Error Viga Configfile %1 not found or the file is not readable second argument is not tuple: must be tuple of int values. python error second argument contains non-numeric values: must be list of int values. python error Cannot have an empty paragraph style name. python error hasdropcap has to be 0 or 1. python error Cannot have an empty char style name. python error Can only hyphenate text frame python error Can only dehyphenate text frame python error Lens Effects PathCutter PathFinder PathStroker Spell check (aspell) Subdivide Xfig Importer Xfig File Parsing the configfile %1 failed! Depending on the type of the error render frames might not work correctly! %2 MeshDistortion PathAlongPath Transform Effect ° degrees, unicode 0xB0 Cannot get text distances of non-text frame. python error Text distances out of bounds, must be positive. python error Cannot set text distances on a non-text frame. python error Bengali Sanskrit Scribus 1.3.4+ Support PathConnect The Font(s): %1 are not embedded or available for Scribus. They might be replaced by "Courier", depending how your Ghostscript is configured. Therefore the image may be not correct Save As Salvestamine Printing... Trükkimine... QTextEdit Clear Puhasta Select All Vali kõik &Undo &Võta tagasi &Redo &Tee uuesti Cu&t &Lõika &Copy &Kopeeri &Paste &Aseta QTitleBar System Menu Süsteemne menüü Shade Keri kokku Unshade Keri lahti Normalize Normaliseeri Minimize Minimeeri Maximize Maksimeeri Close Sulge QWorkspace &Restore &Taasta &Move &Liiguta &Size Muu&da suurust Mi&nimize Mi&nimeeri Ma&ximize Ma&ksimeeri &Close S&ulge Stay on &Top Ala&ti peal Minimize Minimeeri Restore Down Alamaknaks Close Sulge Sh&ade K&eri kokku %1 - [%2] %1 - [%2] &Unshade Keri laht&i ReformDoc Custom Kohandatud Document Setup Dokumendi seadistused Page Size Lehekülje suurus &Size: &Suurus: Orie&ntation: Orie&ntatsioon: Portrait Püstpaigutus