@default getColorNames() -> list Returns a list containing the names of all defined colors in the document. If no document is open, returns a list of the default document colors. getColorNames() -> list Returnerer en liste med navn på alle definerte farger i dokumentet. Hvis ikke et dokument er åpnet, så vil en liste med standard dokumentfarger bli returnert. newDocDialog() -> bool Displays the "New Document" dialog box. Creates a new document if the user accepts the settings. Does not create a document if the user presses cancel. Returns true if a new document was created. newDocDialog() -> bool Viser dialogboksen "New Document". Lager et nytt dokument hvis brukeren aksepterer innstillingene. Lager ikke et nytt dokument hvis brukeren trykker Avbryt. Returnerer true hvis et nytt dokument lages. getFillColor(["name"]) -> string Returns the name of the fill color of the object "name". If "name" is not given the currently selected item is used. getFillColor(["name"]) -> string Returnerer navnet på fyllfargen til objektet med navn "name". Hvis "name".ikke er oppgitt, så vil det objektet som er valgt bli brukt. moveObject(dx, dy [, "name"]) Moves the object "name" by dx and dy relative to its current position. The distances are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. moveObject(dx, dy [, "name"]) Flytter objektet "name" en avstand dy og dx relativt til dets nåværende posisjon. Enhetene som brukes er den enhet som er valgt for dokumentet. Hvis "name" ikke er oppgitt, så vil det objektet som er valgt bli brukt. Hvis objektet "name" tilhører en gruppe, så vil hele gruppen bli flyttet. getColor("name") -> tuple Returns a tuple (C, M, Y, K) containing the four color components of the color "name" from the current document. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. changeColor("name", c, m, y, k) Changes the color "name" to the specified CMYK value. The color value is defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. deleteColor("name", "replace") Deletes the color "name". Every occurence of that color is replaced by the color "replace". If not specified, "replace" defaults to the color "None" - transparent. deleteColor works on the default document colors if there is no document open. In that case, "replace", if specified, has no effect. May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. replaceColor("name", "replace") Every occurence of the color "name" is replaced by the color "replace". May raise NotFoundError if a named color wasn't found. May raise ValueError if an invalid color name is specified. messageBox("caption", "message", icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT, button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer Displays a message box with the title "caption", the message "message", and an icon "icon" and up to 3 buttons. By default no icon is used and a single button, OK, is displayed. Only the caption and message arguments are required, though setting an icon and appropriate button(s) is strongly recommended. The message text may contain simple HTML-like markup. Returns the number of the button the user pressed. Button numbers start at 1. For the icon and the button parameters there are predefined constants available with the same names as in the Qt Documentation. These are the BUTTON_* and ICON_* constants defined in the module. There are also two extra constants that can be binary-ORed with button constants: BUTTONOPT_DEFAULT Pressing enter presses this button. BUTTONOPT_ESCAPE Pressing escape presses this button. Usage examples: result = messageBox('Script failed', 'This script only works when you have a text frame selected.', ICON_ERROR) result = messageBox('Monkeys!', 'Something went ook! <i>Was it a monkey?</i>', ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE) Defined button and icon constants: BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO, BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL, ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL. valueDialog(caption, message [,defaultvalue]) -> string Shows the common 'Ask for string' dialog and returns its value as a string Parameters: window title, text in the window and optional 'default' value. Example: valueDialog('title', 'text in the window', 'optional') closeDoc() Closes the current document without prompting to save. May throw NoDocOpenError if there is no document to close haveDoc() -> bool Returns true if there is a document open. openDoc("name") Opens the document "name". May raise ScribusError if the document could not be opened. saveDoc() Saves the current document with its current name, returns true if successful. If the document has not already been saved, this may bring up an interactive save file dialog. If the save fails, there is currently no way to tell. saveDocAs("name") Saves the current document under the new name "name" (which may be a full or relative path). May raise ScribusError if the save fails. setUnit(type) Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_<type>. May raise ValueError if an invalid unit is passed. getUnit() -> integer (Scribus unit constant) Returns the measurement units of the document. The returned value will be one of the UNIT_* constants: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. loadStylesFromFile("filename") Loads paragraph styles from the Scribus document at "filename" into the current document. setDocType(facingPages, firstPageLeft) Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT. getLineColor(["name"]) -> string Returns the name of the line color of the object "name". If "name" is not given the currently selected item is used. getLineWidth(["name"]) -> integer Returns the line width of the object "name". If "name" is not given the currently selected Item is used. getLineShade(["name"]) -> integer Returns the shading value of the line color of the object "name". If "name" is not given the currently selected item is used. getLineEnd(["name"]) -> integer (see constants) Returns the line cap style of the object "name". If "name" is not given the currently selected item is used. The cap types are: CAP_FLAT, CAP_ROUND, CAP_SQUARE getLineStyle(["name"]) -> integer (see constants) Returns the line style of the object "name". If "name" is not given the currently selected item is used. Line style constants are: LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID getFillShade(["name"]) -> integer Returns the shading value of the fill color of the object "name". If "name" is not given the currently selected item is used. getImageScale(["name"]) -> (x,y) Returns a (x, y) tuple containing the scaling values of the image frame "name". If "name" is not given the currently selected item is used. getImageName(["name"]) -> string Returns the filename for the image in the image frame. If "name" is not given the currently selected item is used. getSize(["name"]) -> (width,height) Returns a (width, height) tuple with the size of the object "name". If "name" is not given the currently selected item is used. The size is expressed in the current measurement unit of the document - see UNIT_<type> for reference. getRotation(["name"]) -> integer Returns the rotation of the object "name". The value is expressed in degrees, and clockwise is positive. If "name" is not given the currently selected item is used. getAllObjects() -> list Returns a list containing the names of all objects on the current page. moveObjectAbs(x, y [, "name"]) Moves the object "name" to a new location. The coordinates are expressed in the current measurement unit of the document (see UNIT constants). If "name" is not given the currently selected item is used. If the object "name" belongs to a group, the whole group is moved. sizeObject(width, height [, "name"]) Resizes the object "name" to the given width and height. If "name" is not given the currently selected item is used. getSelectedObject([nr]) -> string Returns the name of the selected object. "nr" if given indicates the number of the selected object, e.g. 0 means the first selected object, 1 means the second selected Object and so on. selectionCount() -> integer Returns the number of selected objects. selectObject("name") Selects the object with the given "name". deselectAll() Deselects all objects in the whole document. groupObjects(list) Groups the objects named in "list" together. "list" must contain the names of the objects to be grouped. If "list" is not given the currently selected items are used. unGroupObjects("name") Destructs the group the object "name" belongs to.If "name" is not given the currently selected item is used. scaleGroup(factor [,"name"]) Scales the group the object "name" belongs to. Values greater than 1 enlarge the group, values smaller than 1 make the group smaller e.g a value of 0.5 scales the group to 50 % of its original size, a value of 1.5 scales the group to 150 % of its original size. The value for "factor" must be greater than 0. If "name" is not given the currently selected item is used. May raise ValueError if an invalid scale factor is passed. loadImage("filename" [, "name"]) Loads the picture "picture" into the image frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not an image frame scaleImage(x, y [, "name"]) Sets the scaling factors of the picture in the image frame "name". If "name" is not given the currently selected item is used. A number of 1 means 100 %. May raise WrongFrameTypeError if the target frame is not an image frame lockObject(["name"]) -> bool Locks the object "name" if it's unlocked or unlock it if it's locked. If "name" is not given the currently selected item is used. Returns true if locked. isLocked(["name"]) -> bool Returns true if is the object "name" locked. If "name" is not given the currently selected item is used. getFontNames() -> list Returns a list with the names of all available fonts. getXFontNames() -> list of tuples Returns a larger font info. It's a list of the tuples with: [ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ] getLayers() -> list Returns a list with the names of all defined layers. setActiveLayer("name") Sets the active layer to the layer named "name". May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getActiveLayer() -> string Returns the name of the current active layer. sentToLayer("layer" [, "name"]) Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerVisible("layer", visible) Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. deleteLayer("layer") Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. createLayer(layer) Creates a new layer with the name "name". May raise ValueError if the layer name isn't acceptable. getGuiLanguage() -> string Returns a string with the -lang value. createEllipse(x, y, width, height, ["name"]) -> string Creates a new ellipse on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createImage(x, y, width, height, ["name"]) -> string Creates a new picture frame on the current page and returns its name. The coordinates are given in the current measurement units of the document. "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createText(x, y, width, height, ["name"]) -> string Creates a new text frame on the actual page and returns its name. The coordinates are given in the actual measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further referencing of that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createLine(x1, y1, x2, y2, ["name"]) -> string Creates a new line from the point(x1, y1) to the point(x2, y2) and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. createPolyLine(list, ["name"]) -> string Creates a new polyline and returns its name. The points for the polyline are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPolygon(list, ["name"]) -> string Creates a new polygon and returns its name. The points for the polygon are stored in the list "list" in the following order: [x1, y1, x2, y2...xn. yn]. At least three points are required. There is no need to repeat the first point to close the polygon. The polygon is automatically closed by connecting the first and the last point. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createBezierLine(list, ["name"]) -> string Creates a new bezier curve and returns its name. The points for the bezier curve are stored in the list "list" in the following order: [x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn] In the points list, x and y mean the x and y coordinates of the point and kx and ky meaning the control point for the curve. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise ValueError if an insufficient number of points is passed or if the number of values passed don't group into points without leftovers. createPathText(x, y, "textbox", "beziercurve", ["name"]) -> string Creates a new pathText by merging the two objects "textbox" and "beziercurve" and returns its name. The coordinates are given in the current measurement unit of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name for further access to that object. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. May raise NotFoundError if one or both of the named base object don't exist. deleteObject(["name"]) Deletes the item with the name "name". If "name" is not given the currently selected item is deleted. objectExists(["name"]) -> bool Test if an object with specified name really exists in the document. The optional parameter is the object name. When no object name is given, returns True if there is something selected. setStyle("style" [, "name"]) Apply the named "style" to the object named "name". If is no object name given, it's applied on the selected object. getAllStyles() -> list Return a list of the names of all paragraph styles in the current document. currentPage() -> integer Returns the number of the current working page. Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. redrawAll() Redraws all pages. savePageAsEPS("name") Saves the current page as an EPS to the file "name". May raise ScribusError if the save failed. deletePage(nr) Deletes the given page. Does nothing if the document contains only one page. Page numbers are counted from 1 upwards, no matter what the displayed first page number is. May raise IndexError if the page number is out of range pageCount() -> integer Returns the number of pages in the document. getHGuides() -> list Returns a list containing positions of the horizontal guides. Values are in the document's current units - see UNIT_<type> constants. setHGuides(list) Sets horizontal guides. Input parameter must be a list of guide positions measured in the current document units - see UNIT_<type> constants. Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost setHGuides([90,250]) # replace current guides entirely getVGuides() See getHGuides. setVGuides() See setHGuides. getPageSize() -> tuple Returns a tuple with page dimensions measured in the document's current units. See UNIT_<type> constants and getPageMargins() getPageItems() -> list Returns a list of tuples with items on the current page. The tuple is: (name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)] means that object named 'Text1' is a text frame (type 4) and is the first at the page... setFillColor("color", ["name"]) Sets the fill color of the object "name" to the color "color". "color" is the name of one of the defined colors. If "name" is not given the currently selected item is used. setLineColor("color", ["name"]) Sets the line color of the object "name" to the color "color". If "name" is not given the currently selected item is used. setLineWidth(width, ["name"]) Sets line width of the object "name" to "width". "width" must be in the range from 0.0 to 12.0 inclusive, and is measured in points. If "name" is not given the currently selected item is used. May raise ValueError if the line width is out of bounds. setLineShade(shade, ["name"]) Sets the shading of the line color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. May raise ValueError if the line shade is out of bounds. setLineJoin(join, ["name"]) Sets the line join style of the object "name" to the style "join". If "name" is not given the currently selected item is used. There are predefined constants for join - JOIN_<type>. setLineEnd(endtype, ["name"]) Sets the line cap style of the object "name" to the style "cap". If "name" is not given the currently selected item is used. There are predefined constants for "cap" - CAP_<type>. setLineStyle(style, ["name"]) Sets the line style of the object "name" to the style "style". If "name" is not given the currently selected item is used. There are predefined constants for "style" - LINE_<style>. setFillShade(shade, ["name"]) Sets the shading of the fill color of the object "name" to "shade". "shade" must be an integer value in the range from 0 (lightest) to 100 (full Color intensity). If "name" is not given the currently selected Item is used. May raise ValueError if the fill shade is out of bounds. setCornerRadius(radius, ["name"]) Sets the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. May raise ValueError if the corner radius is negative. setMultiLine("namedStyle", ["name"]) Sets the line style of the object "name" to the named style "namedStyle". If "name" is not given the currently selected item is used. May raise NotFoundError if the line style doesn't exist. getFont(["name"]) -> string Returns the font name for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. getTextLength(["name"]) -> integer Returns the length of the text in the text frame "name". If "name" is not given the currently selected item is used. getText(["name"]) -> string Returns the text of the text frame "name". If this text frame has some text selected, the selected text is returned. All text in the frame, not just currently visible text, is returned. If "name" is not given the currently selected item is used. getAllText(["name"]) -> string Returns the text of the text frame "name" and of all text frames which are linked with this frame. If this textframe has some text selected, the selected text is returned. If "name" is not given the currently selected item is used. getLineSpacing(["name"]) -> float Returns the line spacing ("leading") of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumnGap(["name"]) -> float Returns the column gap size of the text frame "name" expressed in points. If "name" is not given the currently selected item is used. getColumns(["name"]) -> integer Gets the number of columns of the text frame "name". If "name" is not given the currently selected item is used. setText("text", ["name"]) Sets the text of the text frame "name" to the text of the string "text". Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ for more details. If "name" is not given the currently selected item is used. setFont("font", ["name"]) Sets the font of the text frame "name" to "font". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. May throw ValueError if the font cannot be found. setFontSize(size, ["name"]) Sets the font size of the text frame "name" to "size". "size" is treated as a value in points. If there is some text selected only the selected text is changed. "size" must be in the range 1 to 512. If "name" is not given the currently selected item is used. May throw ValueError for a font size that's out of bounds. setLineSpacing(size, ["name"]) Sets the line spacing ("leading") of the text frame "name" to "size". "size" is a value in points. If "name" is not given the currently selected item is used. May throw ValueError if the line spacing is out of bounds. setColumnGap(size, ["name"]) Sets the column gap of the text frame "name" to the value "size". If "name" is not given the currently selected item is used. May throw ValueError if the column gap is out of bounds (must be positive). setColumns(nr, ["name"]) Sets the number of columns of the text frame "name" to the integer "nr". If "name" is not given the currently selected item is used. May throw ValueError if number of columns is not at least one. setTextAlignment(align, ["name"]) Sets the text alignment of the text frame "name" to the specified alignment. If "name" is not given the currently selected item is used. "align" should be one of the ALIGN_ constants defined in this module - see dir(scribus). May throw ValueError for an invalid alignment constant. deleteText(["name"]) Deletes any text in the text frame "name". If there is some text selected, only the selected text will be deleted. If "name" is not given the currently selected item is used. setTextColor("color", ["name"]) Sets the text color of the text frame "name" to the color "color". If there is some text selected only the selected text is changed. If "name" is not given the currently selected item is used. setTextStroke("color", ["name"]) Set "color" of the text stroke. If "name" is not given the currently selected item is used. setTextShade(shade, ["name"]) Sets the shading of the text color of the object "name" to "shade". If there is some text selected only the selected text is changed. "shade" must be an integer value in the range from 0 (lightest) to 100 (full color intensity). If "name" is not given the currently selected item is used. linkTextFrames("fromname", "toname") Link two text frames. The frame named "fromname" is linked to the frame named "toname". The target frame must be an empty text frame and must not link to or be linked from any other frames already. May throw ScribusException if linking rules are violated. unlinkTextFrames("name") Remove the specified (named) object from the text frame flow/linkage. If the frame was in the middle of a chain, the previous and next frames will be connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)' May throw ScribusException if linking rules are violated. traceText(["name"]) Convert the text frame "name" to outlines. If "name" is not given the currently selected item is used. progressReset() Cleans up the Scribus progress bar previous settings. It is called before the new progress bar use. See progressSet. progressTotal(max) Sets the progress bar's maximum steps value to the specified number. See progressSet. progressSet(nr) Set the progress bar position to "nr", a value relative to the previously set progressTotal. The progress bar uses the concept of steps; you give it the total number of steps and the number of steps completed so far and it will display the percentage of steps that have been completed. You can specify the total number of steps with progressTotal(). The current number of steps is set with progressSet(). The progress bar can be rewound to the beginning with progressReset(). [based on info taken from Trolltech's Qt docs] setCursor() [UNSUPPORTED!] This might break things, so steer clear for now. docChanged(bool) Enable/disable save icon in the Scribus icon bar and the Save menu item. It's useful to call this procedure when you're changing the document, because Scribus won't automatically notice when you change the document using a script. setScaleImageToFrame(scaletoframe, proportional=None, name=<selection>) Sets the scale to frame on the selected or specified image frame to `scaletoframe'. If `proportional' is specified, set fixed aspect ratio scaling to `proportional'. Both `scaletoframe' and `proportional' are boolean. May raise WrongFrameTypeError. getColorAsRGB("name") -> tuple Returns a tuple (R,G,B) containing the three color components of the color "name" from the current document, converted to the RGB color space. If no document is open, returns the value of the named color from the default document colors. May raise NotFoundError if the named color wasn't found. May raise ValueError if an invalid color name is specified. getPropertyCType(object, property, includesuper=True) Returns the name of the C type of `property' of `object'. See getProperty() for details of arguments. If `includesuper' is true, search inherited properties too. getPropertyNames(object, includesuper=True) Return a list of property names supported by `object'. If `includesuper' is true, return properties supported by parent classes as well. getProperty(object, property) Return the value of the property `property' of the passed `object'. The `object' argument may be a string, in which case the named PageItem is searched for. It may also be a PyCObject, which may point to any C++ QObject instance. The `property' argument must be a string, and is the name of the property to look up on `object'. The return value varies depending on the type of the property. setProperty(object, property, value) Set `property' of `object' to `value'. If `value' cannot be converted to a type compatible with the type of `property', an exception is raised. An exception may also be raised if the underlying setter fails. See getProperty() for more information. renderFont("name", "filename", "sample", size, format="PPM") -> bool Creates an image preview of font "name" with given text "sample" and size. If "filename" is not "", image is saved into "filename". Otherwise image data is returned as a string. The optional "format" argument specifies the image format to generate, and supports any format allowed by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM. May raise NotFoundError if the specified font can't be found. May raise ValueError if an empty sample or filename is passed. isLayerPrintable("layer") -> bool Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getPageMargins() Returns the page margins as a (top, left, right, bottom) tuple in the current units. See UNIT_<type> constants and getPageSize(). selectText(start, count, ["name"]) Selects "count" characters of text in the text frame "name" starting from the character "start". Character counting starts at 0. If "count" is zero, any text selection will be cleared. If "name" is not given the currently selected item is used. May throw IndexError if the selection is outside the bounds of the text. textOverflows(["name", nolinks]) -> integer Returns the actual number of overflowing characters in text frame "name". If is nolinks set to non zero value it takes only one frame - it doesn't use text frame linking. Without this parameter it search all linking chain. May raise WrongFrameTypeError if the target frame is not an text frame isPDFBookmark(["name"]) -> bool Returns true if the text frame "name" is a PDF bookmark. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame newStyleDialog() -> string Shows 'Create new paragraph style' dialog. Function returns real style name or None when user cancels the dialog. newDoc(size, margins, orientation, firstPageNumber, unit, facingPages, firstSideLeft) -> bool WARNING: Obsolete procedure! Use newDocument instead. Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. facingPages = FACINGPAGES, NOFACINGPAGES firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, FACINGPAGES, FIRSTPAGERIGHT) closeMasterPage() Closes the currently active master page, if any, and returns editing to normal. Begin editing with editMasterPage(). masterPageNames() Returns a list of the names of all master pages in the document. editMasterPage(pageName) Enables master page editing and opens the named master page for editing. Finish editing with closeMasterPage(). createMasterPage(pageName) Creates a new master page named pageName and opens it for editing. deleteMasterPage(pageName) Delete the named master page. zoomDocument(double) Zoom the document in main GUI window. Actions have whole number values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker. getFillTransparency(["name"]) -> float Returns the fill transparency of the object "name". If "name" is not given the currently selected Item is used. getFillBlendmode(["name"]) -> integer Returns the fill blendmode of the object "name". If "name" is not given the currently selected Item is used. getLineTransparency(["name"]) -> float Returns the line transparency of the object "name". If "name" is not given the currently selected Item is used. getLineBlendmode(["name"]) -> integer Returns the line blendmode of the object "name". If "name" is not given the currently selected Item is used. setLayerLocked("layer", locked) Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerLocked("layer") -> bool Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerOutlined("layer") -> bool Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerFlow("layer") -> bool Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerBlendmode("layer") -> int Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. getLayerTransparency("layer") -> float Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. textFlowMode("name" [, state]) Enables/disables "Text Flows Around Frame" feature for object "name". Called with parameters string name and optional int "state" (0 <= state <= 3). Setting "state" to 0 will disable text flow. Setting "state" to 1 will make text flow around object frame. Setting "state" to 2 will make text flow around bounding box. Setting "state" to 3 will make text flow around contour line. If "state" is not passed, text flow is toggled. duplicateObject(["name"]) -> string creates a Duplicate of the selected Object (or Selection Group). setInfo("author", "info", "description") -> bool Sets the document information. "Author", "Info", "Description" are strings. getPageType() -> integer Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page getTextLines(["name"]) -> integer Returns the number of lines of the text in the text frame "name". If "name" is not given the currently selected item is used. defineColor("name", c, m, y, k) Defines a new color "name". The color Value is defined via four components: c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in the range from 0 to 255. May raise ValueError if an invalid color name is specified. getCornerRadius(["name"]) -> integer Returns the corner radius of the object "name". The radius is expressed in points. If "name" is not given the currently selected item is used. getPosition(["name"]) -> (x,y) Returns a (x, y) tuple with the position of the object "name". If "name" is not given the currently selected item is used. The position is expressed in the actual measurement unit of the document - see UNIT_<type> for reference. rotateObjectAbs(rot [, "name"]) Sets the rotation of the object "name" to "rot". Positive values mean counter clockwise rotation. If "name" is not given the currently selected item is used. setLayerPrintable("layer", printable) Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. isLayerVisible("layer") -> bool Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. insertText("text", pos, ["name"]) Inserts the text "text" at the position "pos" into the text frame "name". Text must be UTF encoded (see setText() as reference) The first character has an index of 0. Inserting text at position -1 appends it to the frame. If "name" is not given the currently selected Item is used. May throw IndexError for an insertion out of bounds. Copy #%1 of Kopi #%1 av setMargins(lr, rr, tr, br) Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br) margins are given in the measurement units of the document - see UNIT_<type> constants. setLayerOutlined("layer", outline) Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerFlow("layer", flow) Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerBlendmode("layer", blend) Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setLayerTransparency("layer", trans) Sets the layers "layer" transparency to trans. May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable. setFillTransparency(transparency, ["name"]) Sets the fill transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setFillBlendmode(blendmode, ["name"]) Sets the fill blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. setLineTransparency(transparency, ["name"]) Sets the line transparency of the object "name" to transparency If "name" is not given the currently selected item is used. setLineBlendmode(blendmode, ["name"]) Sets the line blendmode of the object "name" to blendmode If "name" is not given the currently selected item is used. placeEPS("filename", x, y) Places the EPS "filename" onto the current page, x and y specify the coordinate of the topleft corner of the EPS placed on the page If loading was successful, the selection contains the imported EPS placeSXD("filename", x, y) Places the SXD "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SXD placed on the page If loading was successful, the selection contains the imported SXD placeODG("filename", x, y) Places the ODG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the ODG placed on the page If loading was successful, the selection contains the imported ODG fileDialog("caption", ["filter", "defaultname", haspreview, issave, isdir]) -> string with filename Shows a File Open dialog box with the caption "caption". Files are filtered with the filter string "filter". A default filename or file path can also supplied, leave this string empty when you don't want to use it. A value of True for haspreview enables a small preview widget in the FileSelect box. When the issave parameter is set to True the dialog acts like a "Save As" dialog otherwise it acts like a "File Open Dialog". When the isdir parameter is True the dialog shows and returns only directories. The default for all of the optional parameters is False. The filter, if specified, takes the form 'comment (*.type *.type2 ...)'. For example 'Images (*.png *.xpm *.jpg)'. Refer to the Qt-Documentation for QFileDialog for details on filters. Example: fileDialog('Open input', 'CSV files (*.csv)') Example: fileDialog('Save report', defaultname='report.txt', issave=True) getLineJoin(["name"]) -> integer (see constants) Returns the line join style of the object "name". If "name" is not given the currently selected item is used. The join types are: JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND rotateObject(rot [, "name"]) Rotates the object "name" by "rot" degrees relatively. The object is rotated by the vertex that is currently selected as the rotation point - by default, the top left vertex at zero rotation. Positive values mean counter clockwise rotation when the default rotation point is used. If "name" is not given the currently selected item is used. gotoPage(nr) Moves to the page "nr" (that is, makes the current page "nr"). Note that gotoPage doesn't (currently) change the page the user's view is displaying, it just sets the page that script commands will operates on. May raise IndexError if the page number is out of range. setPDFBookmark("toggle", ["name"]) Sets whether (toggle = 1) the text frame "name" is a bookmark nor not. If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame moveSelectionToFront() Moves current selection to front. moveSelectionToFront() Moves current selection to back. importPage("fromDoc", (pageList), [create, imortwhere, importwherePage]) Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the "Page->Import" dropdown menu function. fromDoc: string; the filename of the document to import pages from pageList: tuple with page numbers of pages to import create: number; 0 to replace existing pages, 1 (default) to insert new pages importWhere: number; the page number (of the current document) at which import the pages importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document createCharStyle(...) Creates a character style. This function takes the following keyword parameters: "name" [required] -> name of the char style to create "font" [optional] -> name of the font to use fontsize [optional] -> font size to set (double) "features" [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!): -> inherit -> bold -> italic -> underline -> underlinewords -> strike -> superscript -> subscript -> outline -> shadowed -> allcaps -> smallcaps "fillcolor" [optional], "fillshade" [optional] -> specify fill options "strokecolor" [optional], "strokeshade" [optional] -> specify stroke options baselineoffset [optional] -> offset of the baseline shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used outlinewidth [optional] -> width of the outline if used underlineoffset [optional], underlinewidth [optional] -> underline options if used strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used scaleh [optional], scalev [optional] -> scale of the chars tracking [optional] -> tracking of the text "language" [optional] -> language code hyphenateText(["name"]) -> bool Does hyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame dehyphenateText(["name"]) -> bool Does dehyphenation on text frame "name". If "name" is not given the currently selected item is used. May raise WrongFrameTypeError if the target frame is not a text frame scrollDocument(x,y) Scroll the document in main GUI window by x and y. newDocument(size, margins, orientation, firstPageNumber, unit, pagesType, firstPageOrder, numPages) -> bool Creates a new document and returns true if successful. The parameters have the following meaning: size = A tuple (width, height) describing the size of the document. You can use predefined constants named PAPER_<paper_type> e.g. PAPER_A4 etc. margins = A tuple (left, right, top, bottom) describing the document margins orientation = the page orientation - constants PORTRAIT, LANDSCAPE firstPageNumer = is the number of the first page in the document used for pagenumbering. While you'll usually want 1, it's useful to have higher numbers if you're creating a document in several parts. unit: this value sets the measurement units used by the document. Use a predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS. pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page, PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and PAGE_4 is 4-fold. firstPageOrder = What is position of first page in the document. Indexed from 0 (0 = first). numPage = Number of pages to be created. The values for width, height and the margins are expressed in the given unit for the document. PAPER_* constants are expressed in points. If your document is not in points, make sure to account for this. example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS, PAGE_4, 3, 1) May raise ScribusError if is firstPageOrder bigger than allowed by pagesType. setRedraw(bool) Disables page redraw when bool = False, otherwise redrawing is enabled. This change will persist even after the script exits, so make sure to call setRedraw(True) in a finally: clause at the top level of your script. createRect(x, y, width, height, ["name"]) -> string Creates a new rectangle on the current page and returns its name. The coordinates are given in the current measurement units of the document (see UNIT constants). "name" should be a unique identifier for the object because you need this name to reference that object in future. If "name" is not given Scribus will create one for you. May raise NameExistsError if you explicitly pass a name that's already used. newPage(where [,"masterpage"]) Creates a new page. If "where" is -1 the new Page is appended to the document, otherwise the new page is inserted before "where". Page numbers are counted from 1 upwards, no matter what the displayed first page number of your document is. The optional parameter "masterpage" specifies the name of the master page for the new page. May raise IndexError if the page number is out of range setGradientFill(type, "color1", shade1, "color2", shade2, ["name"]) Sets the gradient fill of the object "name" to type. Color descriptions are the same as for setFillColor() and setFillShade(). See the constants for available types (FILL_<type>). createParagraphStyle(...) Creates a paragraph style. This function takes the following keyword parameters: "name" [required] -> specifies the name of the paragraphstyle to create linespacingmode [optional] -> specifies the linespacing mode; possible modes are: fixed linespacing: 0 automatic linespacing: 1 baseline grid linespacing: 2 linespacing [optional] -> specifies the linespacing if using fixed linespacing alignment [optional] -> specifies the alignment of the paragraph -> left: 0 -> center: 1 -> right: 2 -> justify: 3 -> extend: 4 leftmargin [optional], rightmargin [optional] -> specify the margin gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs firstindent [optional] -> the indent of the first line hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no) dropcaplines [optional] -> height (in lines) of the caps if used dropcapoffset [optional] -> offset of the caps if used "charstyle" [optional] -> char style to use getFontSize(["name"]) -> float Returns the font size in points for the text frame "name". If this text frame has some text selected the value assigned to the first character of the selection is returned. If "name" is not given the currently selected item is used. messagebarText("string") Writes the "string" into the Scribus message bar (status line). The text must be UTF8 encoded or 'unicode' string(recommended). placeSVG("filename", x, y) Places the SVG "filename" onto the current page, x and y specify the coordinate of the topleft corner of the SVG placed on the page If loading was successful, the selection contains the imported SVG getTextDistances(["name"]) -> tuple Returns the text distances of the text frame "name" expressed in points. The distances are returned as a tuple like (left, right, top, bottom). If "name" is not given the currently selected item is used. setTextDistances(left, right, top, bottom, ["name"]) Sets the text distances of the text frame "name" to the values "left" "right", "top" and "bottom". If "name" is not given the currently selected item is used. May throw ValueError if any of the distances are out of bounds (must be positive). AIPlug Importing: %1 Analyzing File: Group%1 Generating Items About %1. %2 %3 %1.%2 %3 Scribus Version %1 %2 %3 Scribus versjon %1 %2 %3 Build-ID: Build-ID: Contributions from: Bidrag fra: Windows port: Windows versjon: German: Tysk: French: Fransk: Italian: Italiensk: Hungarian: Ungarsk: Ukrainian: Ukrainsk: Bulgarian: Bulgarsk: Galician: Galisk: Turkish: Tyrkisk: Lithuanian: Litauisk: Polish: Polsk: Czech: Tsjekkisk: Slovak: Slovakisk: Danish: Dansk: Norwegian: Norsk: Welsh: Welsk: Russian: Russisk: Brazilian: Brasiliansk: Finnish: Finsk: Slovenian: Slovensk: Basque: Baskisk: &About &Om A&uthors &Forfattere &Translations &Oversettelser &Online &Nett &Close &Lukk Development Team: Utviklingslag: Official Documentation: Offisiell dokumentasjon: Other Documentation: Annen dokumentasjon: Official Translations and Translators: Offisielle oversettelser og oversettere: English (British): Engelsk (Britisk): Esperanto: Esperanto: Korean: Koreansk: Serbian: Serbisk: Spanish: Spansk: Swedish: Svensk: Previous Translation Contributors: Tidligere oversettere: Catalan: Katalansk: Homepage Hjemmeside Online Reference Online referanse Bugs and Feature Requests Feil og ønsker Mailing List E-postliste About Scribus %1 Om Scribus %1 %1 %2 %3 %1 %2 %3 Using GhostScript version %1 Bruker GhostScript versjon %1 No GS version available Ingen GS versjon tilgjengelig Scribus Version %1 %2 %3 (%4) Scribus versjon %1 %2 %3 (%4) Mac OSX Aqua Port: Mac OSX Aqua Port: Windows Port: Windows Port: Wiki Wiki This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Missing library support is indicated by a * Dette viser hvilken Scribus versjon du bruker, når den ble bygd og hvilke biblioteker den inkludereeer. C-C-T-F står for C=littlecms C=CUPS T=TIFF F=Fontconfig støtte. Manglende støtte for noe av dette er indikert med en * November November %1 %2 %3 %1 %2 %3 %3-%2-%1 %4 %5 %3-%2-%1 %4 %5 Using Ghostscript version %1 Bruker Ghostscript versjon %1 No Ghostscript version available Ingen Ghostscript versjon tilgjengelig <b>Scribus Version %1</b><p>%2<br/>%3 %4<br/>%5</p> <b>Scribus Versjon %1</b><p>%2<br/>%3 %4<br/>%5</p> Build ID: Bygg ID: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. Dette panelet viser hvilken versjon, byggdato og hvilke biblioteker som er inkludert i Scribus. Koden C-C-T-F henviser C=littlecms C=CUPS T=TIFF støtte F=Fontconfig. Den siste bokstaven viser til C=cairo eller A=libart. Manglene bibliotek er merket med en *. Dette panelet viser også hvilken Ghostscript versjon som Scribus har funnet på systemet og bruker. January Januar Mac OS&#174; X Aqua Port: Windows&#174; Port: March Mars Tango Project Icons: &Updates Check for updates to Scribus. No data from your machine will be transferred off it. OS/2&#174;/eComStation&#8482; Port: Splash Screen: This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries. <p align="center"><b>%1 %2</b></p><p align="center">%3<br>%4 %5<br>%6</p> Scribus Version Scribus versjon Check for Updates Abort Update Check Developer Blog &Licence Unable to open licence file. Please check your install directory or the Scribus website for licencing information. Doc Translators: Webmasters: Unable to open %1 file. Please check your install directory or the Scribus website for %1 information. AboutPlugins Yes Ja No Nei Filename: Filnavn: Version: Versjon: Enabled: Skrudd på: Release Date: Utgivelsesdato: Description: Beskrivelse: Author(s): Forfatter(e): Copyright: Copyright: License: Lisens: Scribus: About Plug-ins Scribus: om tilleggsprogram AboutPluginsBase Scribus: About Plug-ins Scribus: om tilleggsprogram File Name: Filnavn: Version: Versjon: Enabled: Skrudd på: Release Date: Utgivelses dato: Copyright: Copyright: Author(s): Forfatter(e): Description: Beskrivelse: License: Lisens: &Close &Lukk Alt+C Alt+C ActionManager &New &Ny &Open... &Åpne ... &Close &Lukk &Save &Lagre Save &As... Lagre &som ... Re&vert to Saved Gå &tilbake til lagret versjon Collect for O&utput... Samle for U&tskrift ... Get Text... Hent tekst ... Append &Text... Legg til &tekst ... Get Image... Sett inn bilde ... Save &Text... Lagre &tekst ... Save Page as &EPS... Lagre som &EPS ... Save as P&DF... Lagre som P&DF ... Document &Setup... Dokument inn&stillinger ... &Print... Skriv &ut ... &Quit A&vslutt &Undo &Angre &Redo &Item Action Mode Cu&t Kli&pp &Copy &Kopier &Paste &Lim inn C&lear Contents F&jern innhold Select &All Velg &alt &Deselect All &Fravelg alt &Search/Replace... &Søk/Erstatt ... Edit Image... Rediger bilde ... C&olors... Far&ger ... &Paragraph Styles... A&vsnitts stiler ... &Line Styles... &Linjestiler ... &Master Pages... &Javascripts... &Javaskripts ... P&references... &Innstillinger ... %1 pt %1 pt &Other... &Andre ... &Left &Venstre &Center &Midten &Right Høy&re &Block &Blokk &Forced &Tvunget &%1 % &%1 % &Normal &Normal &Underline &Understrek Underline &Words Understek &ord &Strike Through &Gjennomstrek &All Caps Small &Caps Su&perscript Hevet &skrift Su&bscript Senket s&krift &Outline &Oversikt S&hadow S&kygge &Image Effects &Bildeeffekter &Tabulators... &Tabulatorer ... D&uplicate K&opier &Multiple Duplicate &Flere kopier &Delete &Slett &Group &Grupèr &Ungroup &Oppløs gruppen Is &Locked Lås/&lås opp for redigering Si&ze is Locked Størr&elsen er fastlåst Lower to &Bottom Legg &underst Raise to &Top Legg &øverst &Lower &Senk &Raise &Hev Send to S&crapbook Send til k&laddebok &Attributes... A&ttributter ... I&mage Visible V&is bilde &Update Image &Oppdater bilde Adjust Frame to Image Juster ramme til bilde Extended Image Properties &Low Resolution &Lav oppløsning &Normal Resolution &Normal oppløsning &Full Resolution &Full oppløsning Is PDF &Bookmark Er et PDF &bokmerke Is PDF A&nnotation Er PDF komme&ntar Annotation P&roperties Kommenta&r egenskaper Field P&roperties Felt egenskape&r &Edit Shape... &Rediger form ... &Attach Text to Path &Legg tekst på sti &Detach Text from Path &Fjern tekst fra sti &Combine Polygons &Kombiner polygoner Split &Polygons Splitt &polygoner &Bezier Curve &Bezierkurve &Image Frame &Bilderamme &Outlines &Oversikt &Polygon &Polygon &Text Frame &Tekstramme &Glyph... Sample Text Eksempeltekst &Insert... Sett &inn ... Im&port... Im&porter ... &Delete... &Slett ... &Copy... &Kopier ... &Move... &Flytt ... &Apply Master Page... Manage &Guides... Håndter &hjelpelinjer ... &Fit in window &Tilpass vinduet &50% &50% &75% &75% &100% &100% &200% &200% &Thumbnails &Thumbnails Show &Margins Vis &marger Show &Frames Vis &rammer Show &Images Vis b&ilder Show &Grid Vis &gitter Show G&uides Vis h&jelpelinjer Show &Baseline Grid Vis &Baseline gitter Show &Text Chain Vis &tekstlenker Show Control Characters Sn&ap to Grid F&est til gitter Sna&p to Guides Fest til hjel&pelinjer &Properties &Egenskaper &Scrapbook &Kladdebok &Layers &Lag &Arrange Pages &Arranger sidene &Bookmarks &Bokmerker &Measurements &Målinger Action &History Aktiver &Historie Preflight &Verifier &Align and Distribute &Juster og fordel &Tools Verk&tøy P&DF Tools P&DF-Verktøy Select Item Velg objekt T&able T&abell &Shape &Form &Line &Linje &Freehand Line &Frihåndslinje Rotate Item Roter objekt Zoom in or out Zoom inn eller ut Zoom in Zoom inn Zoom out Zoom ut Edit Contents of Frame Rediger innholdet i denne rammen Edit Text... Rediger tekst ... Link Text Frames Lenk sammen tekstrammer Unlink Text Frames Fjern lenken mellom tekstrammene &Eye Dropper Copy Item Properties Edit the text with the Story Editor Rediger teksten med tekstbehandler Insert Text Frame Sett inn tekstramme Insert Image Frame Sett inn bilderamme Insert Table Sett inn tabell Insert Shape Sett inn en form Insert Polygon Sett inn polygon Insert Line Sett inn linje Insert Bezier Curve Sett inn Bezierkurve Insert Freehand Line Sett inn frihåndtegnet linje &Manage Pictures Hå&ndter bilder &Hyphenate Text &Orddel tekst Dehyphenate Text &Generate Table Of Contents &Lag innholdfortegnelse &About Scribus &Om Scribus About &Qt Om &Qt Toolti&ps Hjel&petekster Scribus &Manual... Scribus h&åndbok ... Smart &Hyphen Non Breaking Dash Non Breaking &Space Page &Number Side&nummer New Line Ny linje Frame Break Column Break Copyright Copyright Registered Trademark Trademark Bullet Kule Em Dash En Dash Figure Dash Quotation Dash Apostrophe Apostroff Toggle Palettes Toggle Guides Manage Page Properties... Håndter egenskaper for siden ... Rulers relative to Page Linjaler relativ i forhold til siden Print Previe&w Forhåndsvisning &av utskrift &JavaScripts... Convert to Master Page... &Cascade &Legg over hverandre &Tile L&egg ved siden av hverandre &About Plug-ins &Om tilleggsprogram More Info... Mer informasjon ... Copy Contents Kopier innhold Paste Contents Lim inn innhold &Printing Enabled &Flip Horizontally &Flip Vertically Show Rulers Vis linjal &Outline Document Outline Palette &Oversikt Solidus Middle Dot En Space Em Space Thin Space Thick Space Mid Space Hair Space Insert Page Number Sett inn sidenummer ff fi fl ffi ffl ft st S&tyles... &Outline type effect &Oversikt &Outlines Convert to oulines &Oversikt Paste (&Absolute) C&lear T&øm Insert PDF Push Button Insert PDF Text Field Insert PDF Check Box Insert PDF Combo Box Insert PDF List Box Insert Text Annotation Insert Link Annotation Save as &EPS... Show Text Frame Columns &Frame... Preview Mode Show Layer Indicators Patterns... Send to Patterns Sticky Tools &Fit to Height Fit to Width Show Bleeds &Zero Width Space Zero Width NB Space Apostrophe Unicode 0x0027 Apostroff Straight Double Unicode 0x0022 Single Left Unicode 0x2018 Single Right Unicode 0x2019 Double Left Unicode 0x201C Double Right Unicode 0x201D Single Reversed Unicode 0x201B Double Reversed Unicode 0x201F Single Left Guillemet Unicode 0x2039 Single Right Guillemet Unicode 0x203A Double Left Guillemet Unicode 0x00AB Double Right Guillemet Unicode 0x00BB Low Single Comma Unicode 0x201A Low Double Comma Unicode 0x201E CJK Single Left Unicode 0x300C CJK Single Right Unicode 0x300D CJK Double Left Unicode 0x300E CJK Double Right Unicode 0x300F &400% &100% {400%?} Insert &Text Frame Insert &Image Frame Insert T&able Insert &Shape Insert &Polygon Insert &Line Insert &Bezier Curve Insert &Freehand Line Scribus Homepage Scribus Online Documentation Scribus Wiki Getting Started with Scribus Show Context Menu &Manage Images &About Plugins Insert Unicode Character Begin Sequence Get Vector File... Advanced Select All... Edit Source... Replace Colors... Rulers Relative to Page Insert &Render Frame Check for Updates Number of Pages Adjust Image to Frame AdjustCmsDialog CMS Settings AdvOptions Advanced Options Flere valg Creates PostScript Level 3 Lager PostScript Nivå 3 Creates PostScript Level 2 only, beware, this can create huge files Lager kun PostScript Nivå 2, OBS! Dette kan føre til store filer Creates PostScript Level 1 only, beware, this can create huge files Lager kun PostScript Nivå 1, OBS! Dette kan føre til store filer Mirror Page(s) &Horizontal Speil siden(e) &horisontalt Mirror Page(s) &Vertical Speil siden(e) &vertikalt Apply &ICC Profiles Bruk &ICC profiler PostScript Level &1 PostScript Nivå &1 PostScript Level &2 PostScript Nivå &2 PostScript Level &3 PostScript Nivå &3 &OK &Greit &Cancel &Avbryt Apply Under Color &Removal Bruk under fje&rning av farge A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. En måte å skru av noen av de gråskygger som er laget av cyan, gult og magenta rød ved å bruke svart istedenfor. UCR virker best på deler av bilder som er nøytrale og/eller mørke toner som ligger nært opptil grått. Bruk dette for å få utsftening enkelteoen bilder til å se bedre; og noe eksperimentering og testing er nødvendig neste gang. UCR reduserer muligheten for overmettning med CMY farger. Align Distribute/Align Fordel/Still opp på linje Align Still opp Horizontal Vannrett Left Sides Venstre sider Middles Midten Right Sides Høyre sider Vertical Loddrett Top Sides Øverste sider Bottom Sides Nederste sider mm mm in i p p &OK &Greit &Apply &Bruk &Cancel &Avbryt &Between: &Mellom: A&lign St&ill opp Di&splacement For&skyvning Distribute &Evenly Fordel &jevnt Bet&ween: &Mellom: Do &Not Change Gjør i&ngen endringer Al&ign S&till opp Dis&placement For&skyvning pt pt Distribute E&venly Fordel &jevnt &Do Not Change &Gjør ingen endringer AlignDistribute Align Still opp &Selected Guide: &Relative To: ... Distribute Fordel &Distance: &Avstand: AlignDistributeBase Align and Distribute Juster og fordel Align Still opp Distribute Fordel &Distance: &Avstand: AlignDistributePalette Align and Distribute Juster og fordel Align Juster &Relative to: &I forhold til: First Selected Første valgte Last Selected Siste valgte Page Side Margins Marger Guide Selection Utvalg Align bottoms Juster alle bunnene Align right sides Juster alle høyresider Center on vertical axis Align left sides Juster alle venstresider Center on horizontal axis Align tops Juster alle topper &Selected Guide: Distribute Fordel Distribute right sides equidistantly Distribute bottoms equidistantly Fordel Distribute centers equidistantly horizontally Distribute left sides equidistantly Distribute centers equidistantly vertically Distribute tops equidistantly &Distance: &Avstand: Distribute the items with the distance specified None Selected Ingen valgt Warning Advarsel &Cancel &Avbryt Y: %1%2 Y: %1%2 X: %1%2 X: %1%2 Align right sides of items to left side of anchor Align left sides of items to right side of anchor Align tops of items to bottom of anchor Align bottoms of items to top of anchor Make horizontal gaps between items equal Make horizontal gaps between items equal to the value specified Make vertical gaps between items equal Make vertical gaps between items equal to the value specified Make horizontal gaps between items and sides of page equal Make vertical gaps between items and the top and bottom of page margins equal Make horizontal gaps between items and sides of page margins equal Make vertical gaps between items and the top and bottom of page equal <qt>Align relative to the:<ul><li>First selected item</li><li>Second Selected Item</li><li>The current page</li><li>The margins of the current page</li><li>A Guide</li><li>The selection</ul></qt> The location of the selected guide to align to AlignSelect Align Text Left Juster tekst mot venstre Align Text Right Juster tekst mot høyre Align Text Center Midtstill tekst Align Text Justified Juster tekstfyll Align Text Forced Justified Juster tekst tvungen fyll Annot Field Properties Felt egenskaper Type: Type: Button Knapp Text Field Tekstfelt Check Box Avkryssingsboks Combo Box Kombiboks List Box Listeboks Properties Egenskaper Name: Navn: Tool-Tip: Hjelpetekst: Text Tekst Border Grense Color: Farge: None Ingen Width: Bredde: Thin Tynn Normal Normal Wide Bred Style: Stil: Solid Solid Dashed Punktet Underline Understreket Beveled Med skrå kanter Inset Sett inn Other Andre Read Only Skrivebeskyttet Required Nødvendig Don't Export Value Ikke eksporter verdi Visibility: Synlighet: Visible Synlig Hidden Skjult No Print Ingen utskrift No View Ingen visning Appearance Utseende Text for Button Down Tekst for knapp ned Text for Roll Over Tekst for rull rundt Icons Ikoner Use Icons Bruk ikoner Remove Fjern Pressed Trykket ned Roll Over Rull rundt Icon Placement... Ikon plassering ... Highlight Markert Invert Inverter Outlined Utlinjet Push Dytt Multi-Line Multi-Linje Password Passord Limit of Maksimalt Characters Tegn Do Not Scroll Ingen rulling Do Not Spell Check Ingen stavekontroll Check Style: Sjekk stil: Check Sjekk Cross Kryss Diamond Diamant Circle Sirkel Star Stjerne Square Firkant Default is Checked Standard er aktiv Editable Redigerbar Options Innstillinger Java Script Java Script Go To Gå til Submit Form Send inn skjema Reset Form Nullstill skjema Import Data Importer data Event: Hendelse: Mouse Up Mus opp Mouse Down Mus ned Mouse Enter Mus Enter Mouse Exit Mus avslutt On Focus På fokus On Blur På Blur Script: Skript: Edit... Rediger ... Submit to URL: Send til URL: Submit Data as HTML Send data som HTML Import Data from: Importer data fra: Destination Bestemmelsessted To File: Til fil: Change... Endre ... Page: Side: X-Pos: X-Pos: pt pt Y-Pos: Y-Pos: Action Handling Field is formatted as: Felt er formatert som: Plain Enkel Number Nummer Percentage Prosentdel Date Dato Time Tid Custom Brukerdefinert Number Format Nummerformat Decimals: Desimaler: Use Currency Symbol Bruk valutasymbol Prepend Currency Symbol Sett valutasymbol foran Formatting Formatering Percent Format Prosentformat Date Format Datoformat Time Format Tidsformat Custom Scripts Brukerdefinerte skript Format: Format: Keystroke: Tasteanslag: Format Format Value is not validated Verdi er ikke kontrollert Value must be greater than or equal to: Verdi skal være lik med eller større enn: and less or equal to: og lik med eller mindre enn: Custom validate script: Brukerdefinert valideringsscript: Validate Valider Value is not calculated Verdi er ikke utregnet Value is the Verdien er sum sum product produkt average gjennomsnitt minimum minimum maximum maksimum of the following fields: av de følgende felter: Pick... Velg ... Custom calculation script: Brukerdefinert utregningsskript: Calculate Regn ut OK Greit Cancel Avbryt Enter a comma separated list of fields here Tast inn en kommaseparert liste med felter her You need at least the Icon for Normal to use Icons for Buttons Du behøver i det minste Normal-Ikonet for å bruke ikoner på knapper Open Åpne Images (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;All Files (*) Bilder (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;Alle filtyper (*) Example: Eksempel: Selection Change Endring av valg Font for use with PDF 1.3: Skrifttyper som skal brukes med PDF 1.3: Flag is ignored for PDF 1.3 Dette valget blir ikke brukt i PDF 1.3 PDF Files (*.pdf);;All Files (*) PDF Filer (*.pdf);;Alle filtyper (*) JavaScript JavaScript Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*) Bilder (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;Alle filer (*) None highlight Ingen None action Ingen Tooltip: Do Not Export Value Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*) Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*) Export absolute Filename Annota Annotation Properties Kommentar egenskaper Text Tekst Link Lenke External Link Ekstern lenke External Web-Link Ekstern Web-Lenke Destination Bestemmelsessted pt pt Open Åpne PDF-Documents (*.pdf);;All Files (*) PDF-Dokumenter (*.pdf);; Alle filtyper (*) &Type: &Type: C&hange... Fo&randre ... &Page: &Side: &X-Pos &X-Pos &Y-Pos: &Y-Pos: &OK &Greit &Cancel &Avbryt %1;;All Files (*) Export absolute Filename ApplyMasterPageDialog Normal Normal Apply Master Page &Master Page: Apply To Bruk på Current &page Denne &siden Alt+P Alt+P &Even pages &Partallsider Alt+E Alt+E O&dd pages &Oddetallsider Alt+D Alt+D &All pages &Alle sider Alt+A Alt+A &Within range &Innenfor område Alt+W Alt+W to til &OK &Greit Alt+O Alt+O &Cancel &Avbryt Alt+C Alt+C Apply the selected master page to even, odd or all pages within the following range Possible Hyphenation Mulig orddeling ApplyT Apply Template Bruk mal Normal Normal &Template: &Mal: Apply to &Current Page Bruk på &gjeldende side Apply from &Page: Bruk fra &side: To: Til: &OK &Greit &Cancel &Avbryt Apply to all &even Pages Bruk på alle sider med &partall Apply to all &odd Pages Bruk på alle sider med &oddetall ArrowChooser None Ingen AspellPlugin Spell-checking support Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text. 0.1 Spell Checker AspellPluginBase Spell Check Replacement: &Add Word &Change &Exit &Avslutt Not in Dictionary: Word that was not found in the active dictionary Replacement text for the current word that was not found in the dictionary Active Dictionary: The currently active dictionary. Scribus uses aspell for dictionary support.<br />If you require updated or more dictionaries, you should install them via your system's installation system or package manager. Ignore the current text not found in the active dictionary &Ignore &Ignorer Ignore all occurrences of the current text not found in the active dictionary I&gnore All Add the current word to the your personal spelling dictionary for future use Change the current word that was not found to that shown in the replacement entry field Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field Change A&ll Close Lukk AspellPluginImpl Loaded default aspell dictionary. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration. aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller. AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of " by adding it to the session list. AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list. Spelling check complete Spell Checker AutoformButtonGroup Arrows Piler Flow Chart Jigsaw Specials Default Shapes Barcode &Barcode Generator... &Strekkode generator ... Scribus frontend for Pure Postscript Barcode Writer &Barcode... BarcodeGenerator Error opening file: %1 Feil ved åpning av fil: %1 12 or 13 digits 12 eller 13 siffer 8 digits 8 siffer 11 or 12 digits 11 eller 12 siffer 7 or 8 digits 7 eller 8 siffer 5 digits 5 siffer 2 digits 2 siffer Variable number of characters, digits and any of the symbols -. *$/+%. Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character. Variable number of digits and any of the symbols -$:/.+ABCD. Variable number of digits. An ITF-14 is 14 characters and does not have a check digit Variable number of digits Variable number of digits and capital letters Variable number of hexadecimal characters Barcode incomplete 12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.) Select Type Select Barcode Type BarcodeGeneratorBase Barcode Creator Strekkode forfatter Barcode Strekkode &Type: &Type: Select one of the available barcode type here The numeric representation of the code itself. See the help message below Reset the barcode samples &Include text in barcode Alt+I Alt+I If checked, there will be numbers in the barcode too &Guard whitespace Alt+G Alt+G Draw arrows to be sure of space next the code Colors Farger &Background &Bakgrunn Alt+B Alt+B Background color - under the code lines &Lines &Linjer Alt+L Alt+L Color of the lines in barcode &Text &Tekst Alt+T Alt+T Color of the text and numbers Hints and help is shown here Preview of the result. 72dpi sample. Co&de: I&nclude checksum Alt+N Alt+N Generate and include a checksum in barcode Incl&ude checksum digit Alt+U Alt+U Include the checksum digit in the barcode text Insert Barcode Format Format Biblio Scrapbook Kladdebok Scrapbooks (*.scs);;All Files (*) Kladdebøker (*.scs);; Alle filtyper (*) Delete Slett Object Objekt New Entry Nytt innslag Rename Endre navn Warning Advarsel Name "%1" isn't unique. Please choose another. Navnet "%1" er ikke entydig. Velg vennligst et annet navn. OK Greit &New &Ny &Load... &Hent ... &Save &Lagre Save &As... Lagre &som ... &Close &Lukk &Small &Liten &Medium &Medium &Large &Stor &File &Fil &Preview &Forhåndsvisning &Name: &Navn: &OK &Greit Name "%1" is not unique. Please choose another. Navnet "%1" er ikke unikt. Velg et annet. Choose a Scrapbook Directory Choose a Directory Velg en katalog Choose a scrapbook file to import Create a new scrapbook page Load an existing scrapbook Save the selected scrapbook Import an scrapbook file from Scribus <=1.3.2 Close the selected scrapbook Copy To: Move To: Main Copied Items New Name Scrapbook (*.scs *.SCS) Paste to Page Save as... Lagre som ... Close Lukk Delete Contents Do you really want to delete all entries? BookMView Bookmarks Bokmerker Move Bookmark Flytt bokmerke Insert Bookmark Sett inn bokmerke Cancel Avbryt BookPalette Bookmarks Bokmerker ButtonIcon Icon Placement Ikonplassering Layout: Utseende: Caption only Kun tekst Icon only Kun ikon Caption below Icon Tekst under ikon Caption above Icon Tekst over ikon Caption right to Icon Tekst til høyre for ikon Caption left to Icon Tekst til venstre for ikon Caption overlays Icon Tekst ovenpå ikon Scale: Skala: Always Alltid When Icon is too small Når ikonet er for lite When Icon is too big Når ikonet er for stort Never Aldri Scale How: Skaler hvordan: Proportional Proporsjonal Non Proportional Ikke-proporsjonal Icon Ikon OK Greit Cancel Avbryt Reset Tilbakestill CMSPrefs Color Management Settings Innstilling av fargestyring System Profiles System profiler Rendering Intents Rendering Intenter Perceptual Oppfattet Relative Colorimetric Relative Colorimetric Saturation Mettning Absolute Colorimetric Absolutt Colorimetric Default color profile for imported images Standard farge profil for importerte bilder Default color profile for solid colors on the page Standard fargeprofil for massive farger på siden Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Fargeprofil du har laget eller mottatt fra produsenten. Denne profil burde være spesielt laget til din skjerm og ikke en generell profil (f.eks. sRGB). Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Fargeprofil for din skrivermodel fra produsenten. Denne profil burde være spesielt laget til din skriver og ikke en generell profil (f.eks. sRGB). Default rendering intent for your monitor. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Standard rendering intent for din skjerm. Hvis ikke du vet hvorfor du burde forandre det, bør du velge Relative Colorimetric eller Perceptual. Default rendering intent for your printer. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Standard rendering intent for din skriver. Hvis ikke du vet hvorfor du burde forandre det, bør du velge Relative Colorimetric eller Perceptual. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Aktiver 'soft proofing' av hvordan dine dokument farger vil skrives ut basert på den valgte skriver profil. Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Metode for å vise farger på skjermen som kanskje ikke skrives ut korrekt. Dette krever veldig nøyaktige profiler og fungerer kun som advarsel. Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation er en metode for å øke kontrasten i fotografier. Det er smart å aktivere dette hvis du har fotografier i ditt dokumentet. &Activate Color Management &Aktiver fargekontroll &Pictures: &Bilder: &Solid Colors: &Solide farger: &Monitor: &Monitor: P&rinter: S&kriver: M&onitor: M&onitor: Pr&inter: S&kriver: Sim&ulate Printer on the Screen Sim&uler skriver på skjermen Mark Colors out of &Gamut Marker farge ut av &Gamut Use &Blackpoint Compensation Bruk &Blackpoint Compensation &OK &Greit &Cancel &Avbryt &RGB Pictures: &RGB bilder: &CMYK Pictures: &CMYK bilder: Images: Bilder: CMSPrefsBase Form &Activate Color Management &Aktiver fargekontroll System Profiles System profiler &RGB Images: Default color profile for imported RGB images &CMYK Images: Default color profile for imported CMYK images &RGB Solid Colors: Default color profile for solid RGB colors on the page &CMYK Solid Colors: Default color profile for solid CMYK colors on the page &Monitor: &Monitor: Color profile that you have generated or received from the manufacturer. This profile should be specific to your monitor and not a generic profile (i.e. sRGB). Fargeprofil du har laget eller mottatt fra produsenten. Denne profil burde være spesielt laget til din skjerm og ikke en generell profil (f.eks. sRGB). P&rinter: S&kriver: Color profile for your printer model from the manufacturer. This profile should be specific to your printer and not a generic profile (i.e. sRGB). Fargeprofil for din skrivermodel fra produsenten. Denne profil burde være spesielt laget til din skriver og ikke en generell profil (f.eks. sRGB). Rendering Intents Rendering Intenter Images: Bilder: Default rendering intent for images. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Sol&id Colors: Default rendering intent for solid colors. Unless you know why to change it, Relative Colorimetric or Perceptual should be chosen. Enable 'soft proofing' of how your document colors will print, based on the chosen printer profile. Aktiver 'soft proofing' av hvordan dine dokument farger vil skrives ut basert på den valgte skriver profil. Sim&ulate Printer on the Screen Sim&uler skriver på skjermen Simulate a full color managed environment : all colors, rgb or cmyk, are converted to printer color space. Convert all colors to printer space Method of showing colors on the screen which may not print properly. This requires very accurate profiles and serves only as a warning. Metode for å vise farger på skjermen som kanskje ikke skrives ut korrekt. Dette krever veldig nøyaktige profiler og fungerer kun som advarsel. Mark Colors out of &Gamut Marker farge ut av &Gamut Black Point Compensation is a method of improving contrast in photos. It is recommended that you enable this if you have photos in your document. Black Point Compensation er en metode for å øke kontrasten i fotografier. Det er smart å aktivere dette hvis du har fotografier i ditt dokumentet. Use &Blackpoint Compensation Bruk &Blackpoint Compensation CMYKChoose Edit Color Rediger farger CMYK CMYK RGB RGB Web Safe RGB Websikkert RGB New Ny Old Gammel OK Greit C: C: % % M: M: Y: Y: K: K: Dynamic Color Bars Dynamiske fargesøyler Static Color Bars Statiske fargesøyler R: R: G: G: B: B: Warning Advarsel Name of the Color is not unique Navnet på denne fargen er brukt allerede HSV-Colormap HSV-Colormap &Name: &Navn: Color &Model Farge&model &OK &Greit &Cancel &Avbryt None Ingen You cannot create a color named "%1". It's a reserved name for transparent color Du kan ikke lage en farge med navn "%1". Dette navnet er reservert for transparente farger Is Spot Color You cannot create a color named "%1". It is a reserved name for transparent color The name of the color already exists, please choose another one. Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management. You cannot create a color without a name Please give it a name HSV Color Map CStyleP Colors Farger CWDialog Normal Vision Noralt syn Protanopia (Red) Protanopia (Rød) Deuteranopia (Green) Deuteranopia (Grønn) Tritanopia (Blue) Tritanopia (Blå) Merging colors Error: Feil: Color %1 exists already! Farge %1 finnes allerede! Color %1 appended. Farge %1 er lagt til. Now opening the color manager. Color Merging Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color. Color Wheel Fargehjul Click the wheel to get the base color. Its color model depends on the chosen tab. Result Colors CMYK CMYK RGB RGB HSV HSV Colors of your chosen color scheme. Color Scheme Method Angle: Vinkel: Difference between the selected value and the counted ones. Refer to documentation for more information. Select one of the methods to create a color scheme. Refer to documentation for more information. Merge created colors into the document colors &Merge Alt+M Alt+M Replace created colors in the document colors &Replace &Bytt ut Alt+R Leave colors untouched &Cancel &Avbryt Alt+C Alt+C Preview: Sample color scheme. Simulate common vision defects here. Select type of the defect. Vision Defect Type: C: C: % % M: M: Y: Y: K: K: RGB: HSV: R: R: G: G: B: B: CMYK: H: H: S: S: V: V: Document Dokument CWDialogBase Color Wheel Fargehjul CMYK CMYK C: C: M: M: Y: Y: K: K: RGB RGB R: R: G: G: B: B: Document Dokument Angle: Vinkel: Alt+M Alt+M &Replace &Bytt ut &Cancel &Avbryt Alt+C Alt+C % % HSV HSV H: H: S: S: V: V: CharSelect Select Character: Velg Tegn: Font: Skrifttype: Character Class: &Insert Sett &inn C&lear T&øm &Close &Lukk Insert the characters at the cursor in the text Sett inn tegn ved markørens posisjon i teksten Delete the current selection(s). Fjern det valgte. Close this dialog and return to text editing. Lukk denne dialog og gå tilbake til tekstredigering. Full Character Set Basic Latin Latin-1 Supplement Latin Extended-A Latin Extended-B General Punctuation Super- and Subscripts Currency Symbols Letterlike Symbols Number Forms Arrows Piler Mathematical Operators Box Drawing Block Elements Geometric Shapes Miscellaneous Symbols Dingbats Small Form Variants Ligatures Specials Greek Gresk Greek Extended Cyrillic Cyrillic Supplement Arabic Arabisk Arabic Extended A Arabic Extended B Hebrew Hebraisk Scribus Char Palette (*.ucp);;All Files (*) Enhanced Palette Quick Palette Choose a filename to open Error Feil Error reading file %1 - file is corrupted propably. Cannot write file %1 Character Palette &Search &Søk Empty the Palette? You will remove all characters from this palette. Are you sure? Hide/Show Enhanced Palette Save Quick Character Palette You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one CharStyleComboBox No Style Ingen stil CharTable Delete Slett CharTableView Delete Slett CheckDocument Glyphs missing Text overflow Object is not on a Page Missing Image Manglende bilde Object has transparency Object is a PDF Annotation or Field Object is a placed PDF Document Dokument No Problems found Ingen problemer funnet Page Side Free Objects Frie objekter Problems found Problemer funnet Preflight Verifier Items Problems Problemer Current Profile: Gjeldende profil: &Ignore Errors &Ignorer feil Check again Image resolution below %1 DPI, currently %2 x %3 DPI Image resolution above %1 DPI, currently %2 x %3 DPI Image is GIF OK Greit Transparency used Blendmode used Layer "%1" Annotation uses a non TrueType font Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing. Rerun the document scan to check corrections you may have made Empty Image Frame CheckerPrefsList Postscript Postscript PDF 1.3 PDF 1.3 PDF 1.4 PDF 1.4 PDF/X-3 PDF/X-3 ChooseStyles Choose Styles Velg stil Available Styles Tilgjengelige stiler OK Greit Cancel Avbryt CollectForOutput Choose a Directory Velg en katalog Collecting... Henter ... Warning Advarsel Cannot collect all files for output for file: %1 Cannot collect the file: %1 ColorManager Colors Farger &Import &Importer &New &Ny &Edit &Rediger D&uplicate K&opier &Delete &Slett &Remove Unused &Fjern ubrukte Color Sets Fargesett Current Color Set: Nåværende fargesett: &Save Color Set &Lagre fargevalg Choose a color set to load Velg et fargesett å laste inn Save the current color set Lagre nåværende fargesett Remove unused colors from current document's color set Slett ikke-brukte farger fra dette dokumentets fargesett Import colors to the current set from an existing document Create a new color within the current set Lag en ny farge innenfor det nåværende sett Edit the currently selected color Rediger den nåværende aktive farge Make a copy of the currently selected color Lag en kopi av den nåværende aktive farge Delete the currently selected color Slett den nåværende aktive farge Make the current colorset the default color set Sett det nåværende fargesett til standard fargesett &Name: &Navn: Choose a Name Velg et navn Open Åpne Copy of %1 Kopi av %1 New Color Ny farge Information Informasjon Import Importer The file %1 does not contain colors which can be imported. If the file was a PostScript-based, try to import it with File -&gt; Import. Not all files have DSC conformant comments where the color descriptions are located. This prevents importing colors from some files. See the Edit Colors section of the documentation for more details. If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks. All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*) Import Colors ColorWheel Monochromatic Analogous Complementary Split Complementary Triadic Tetradic (Double Complementary) Base Color Monochromatic Light Monochromatic Dark 1st. Analogous 2nd. Analogous 1st. Split 2nd. Split 3rd. Split 4th. Split 1st. Triadic 2nd. Triadic 1st. Tetradic (base opposite) 2nd. Tetradic (angle) 3rd. Tetradic (angle opposite) ColorWheelDialog Color Wheel Fargehjul Color Farge Name Navn C C M M Y Y K K Select Method: Velg metode: Angle (0 - 90 degrees): Vinkel (0 - 90 grader): &Cancel &Avbryt Error: Feil: Normal Vision Noralt syn Vision Defect: Synsdefekt: Cr&eate color... &Lag farge ... E&xit A&vslutt C&olor F&arge Value: Verdi: New Color Ny farge Protanopia (Red) Protanopia (Rød) Deuteranopia (Green) Deuteranopia (Grønn) Tritanopia (Blue) Tritanopia (Blå) Color %1 exists already! Farge %1 finnes allerede! Color %1 appended. Farge %1 er lagt til. ColorWheelPlugin &Color Wheel... &Fargehjul ... Color setting helper Color selector with color theory included. CommonStrings &Apply &Bruk &Cancel &Avbryt None Ingen &OK &Greit &Save &Lagre Warning Advarsel None color name Ingen Custom CommonStrings, custom page size Brukerdefinert Single Page Enkeltsidig Double Sided Dobbeltsidig 3-Fold 4-Fold Left Page Venstre side Middle I midten Middle Left I midten mot venstre Middle Right I midten mot høyre Right Page Høyre side Monday Tuesday Wednesday Thursday Friday Saturday Sunday January Januar February March Mars April May June July August September October November November December Yes Ja No Nei &Yes &Ja &No Normal Normal Left Page Left page location Venstre side Middle Middle page location I midten Middle Left Middle Left page location Middle Right Middle Right page location Right Page Right page location Høyre side Normal Default single master page Normal Normal Left Default left master page Normal Middle Default middle master page Normal Right Default right master page Normal Vision Color Blindness - Normal Vision Noralt syn Protanopia (Red) Color Blindness - Red Color Blind Protanopia (Rød) Deuteranopia (Green) Color Blindness - Greed Color Blind Deuteranopia (Grønn) Tritanopia (Blue) Color Blindness - Blue Color Blind Tritanopia (Blå) Full Color Blindness Color Blindness - Full Color Blindness Custom: Custom Tab Fill Option Brukerdefinert: Solid Line Heltrukken linje Dashed Line Prikket linje Dotted Line Prikket linje Dash Dot Line Bindestrek punktum linje Dash Dot Dot Line Bindestrek punktum punktum linje None Optical Margin Setting Ingen Left Protruding Optical Margin Setting Right Protruding Optical Margin Setting Left Hanging Punctuation Optical Margin Setting Right Hanging Punctuation Optical Margin Setting Default Optical Margin Setting Min. Word Tracking Max. Word Tracking Min. Glyph Extension Max. Glyph Extension RGB Colorspace RGB CMYK Colorspace CMYK Grayscale Colorspace Gråskala Duotone Colorspace Unknown Colorspace (Unknown) Ukjent PostScript PostScript Text Frame Tekstramme Image Frame Line Linje Polygon Polygon Polyline Polylinje Text on a Path Legg tekst til sti Multiple Multiple frame types PDF Push Button PDF Text Field PDF Check Box PDF Combo Box PDF List Box PDF Text Annotation PDF Link Annotation PostScript Level 1 PostScript nivå 1 PostScript Level 2 PostScript nivå 2 PostScript Level 3 PostScript nivå 3 Windows GDI Render Frame Default Paragraph Style Default Character Style Default Line Style ContextMenu Preview Settings Forhånsvisning innstillinger Paste File... Delete Page CopyPageToMasterPageBase Convert Page to Master Page Name: Navn: Copy Applied Master Page Items CopyPageToMasterPageDialog New Master Page %1 Cpalette Shade: Skygge: % % Opacity: Gjennomsiktighet: Normal Normal Horizontal Gradient Horisontal skravering Vertical Gradient Vertikal skravering Diagonal Gradient Diagonal skravering Cross Diagonal Gradient Kryssdiagonal gradering Radial Gradient Radial skravering Edit Line Color Properties Rediger egenskapene til linjefargen Edit Fill Color Properties Rediger egenskapene til fyllfargen Saturation of color Metning av farge Normal or gradient fill method Normal eller skravering fyllmetode Set the transparency for the color selected Sett gjennomsiktigheten av den valgte fargen Color of selected object Det valgte objektets farge None Ingen Free linear Gradient Fri lineær skravering Free radial Gradient Fri radial skravering X1: X1: Y1: Y1: pt pt X2: X2: Y2: Y2: mm mm in in p p Move Vector Flytt vektor Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed Transparency Settings Blend Mode: Darken Lighten Multiply Screen Skjerm Overlay Hard Light Soft Light Difference Forskjell Color Dodge Color Burn Hue Saturation Color Farge Luminosity Offsets X: X: Y: Y: Scaling Rotation Angle Pattern Exclusion X-Scale: Y-Scale: Display only used Colors Display all colors from the document color list, or only the already used colors CreateRange Create Range Number of Pages in Document: Doc Page Range Basic Range Selection Range of Pages De&lete &Slett Alt+L Alt+L Move &Down Alt+D Alt+D Move &Up Alt+U Alt+U Add a Range of Pages Consecutive Pages Even Pages From: To: Til: &Add To Range Alt+A Alt+A Odd Pages Comma Separated List Advanced Reordering Page Order Sample Page Order: Page Group Size: &OK Alt+O Alt+O &Cancel &Avbryt Alt+C Alt+C CreateRangeBase To: Til: Alt+A Alt+A Alt+U Alt+U Alt+D Alt+D De&lete &Slett Alt+L Alt+L Alt+O Alt+O &Cancel &Avbryt Alt+C Alt+C CsvDialog CSV Importer Options Opsjoner for CVS import Field delimiter: Skillefelt: (TAB) (TAB) Value delimiter: Skilleverdi: None Ingen First row is a header Første rad er overskrift OK Greit Cancel Avbryt None delimiter Ingen CupsOptions Printer Options Skriver innstillinger Page Set Sideoppsett All Pages Alle sider Even Pages only Kun partall sider Odd Pages only Kun oddetall sider Mirror Speil No Nei Yes Ja Orientation Retning Portrait Stående Landscape Landskap N-Up Printing N-Up Utskriving Page per Sheet Side per ark Pages per Sheet Sider per ark Option Innstilling Value Verdi This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * Denne panel viser diverse CUPS innstillinger mens skriving pågår. Hvilke parametre er tilgjengelige avhenger av din skriver driver. Du kan sjekke for CUPS støtte ved å gå på Hjelp > Om. Se etter: C-C-T Disse står for C=CUPS C=littlecms T=Tiff støtte. Manglende librarz støtte er indikert med et * &OK &Greit &Cancel &Avbryt This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a * CurveWidget Open Åpne Curve Files (*.scu);;All Files (*) Save as Lagre som Cannot write the file: %1 Inverts the curve Resets the curve Switches between linear and cubic interpolation of the curve Loads a curve Saves this curve CustomFDialog Encoding: Kodering: Moves to your Document Directory. This can be set in the Preferences. Denne bringer deg til din standard katalog for dokumenter. Denne kan du selv velge i Preferanser. &Compress File &Komprimer filen &Include Fonts &Inkluder skrifttypene Show Preview &Include Color Profiles Show a preview and information for the selected file Compress the Scribus document on save Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute. Include color profiles when collecting files for the document CwSetColor CMYK CMYK RGB RGB HSV HSV H: H: S: S: V: V: R: R: G: G: B: B: C: C: M: M: Y: Y: K: K: Set &RGB Bruk &RGB Set C&MYK Bruk C&MYK Set &HSV Bruk &HSV DashEditor Value: Verdi: Offset: DeferredTask Cancelled by user Avbrutt av bruker DelColor Delete Color Fjern farge Delete color: Fjern farge: ? ? Replace it with: Erstatt den med: None Ingen &OK &Greit &Cancel &Avbryt Delete Color: Slett farge: Replace With: Erstatt med: DelPages Delete Pages Slett sider Delete from: Slett fra: to: til: &OK &OK &Cancel &Avbryt Delete From: Slett fra: DelStyle Delete Style Slett stilen Delete Style: Slett stilen: Replace With: Erstatt med: No Style Ingen stil DmF Missing Font Manglende skrifttype The Font %1 is not installed. Skrifttypen %1 er ikke installert. Use Bruk instead i stedet OK Greit DocIm Importing failed Import feilet Importing Word document failed %1 Import av Word dokument feilet %1 DocInfos Document Information Dokument informasjon &Title: &Tittel: &Author: &Forfatter: &Keywords: Nø&kkelord: Descri&ption: Beskri&velse: P&ublisher: &Utgiver: &Contributors: &Bidragsytere: Dat&e: Da&to: T&ype: T&ype: F&ormat: F&ormat: Identi&fier: Identi&fiser: &Source: &Kilde: &Language: &Språk: &Relation: &Relasjon: Co&verage: Dek&ning: Ri&ghts: Retti&gheter: &Document &Dokument Further &Information Mer &informasjon The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Personen eller organisasjonen som primært er ansvarlig for å lage dokumentets innhold. Dette felt kan bli inkludert i Scribus dokumentet for referanse, såvel som i metadataene til en PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF Et navn som er gitt til dokumentet. Dette felt kan bli inkludert i Scribus dokumentet for referanse, såvel som i metadataene til en PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export En beskrivelse av dokumentets innhold. Dette felt er for en innholdsbeskrivelse eller sammenfatning av dokumentet. Det blir inkludert i PDFen ved eksport The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files Temaet for dokumentets innhold. Dette felt er for dokument nøkkelord som du vil inkludere i en PDF, til å assistere søkninger og indeksering av PDF filer A person or organisation responsible for making the document available En person eller organisasjon som er ansvarlig for å gjøre dokumentet tilgjengelig A person or organisation responsible for making contributions to the content of the document En person eller organisasjon som er ansvarlig for å bidra til dokumentets innhold A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601 En dato assosiert med en hendelse i dokumentets livssyklus, i YYYY-MM-DD format, som per ISO 8601 The nature or genre of the content of the document, eg. categories, functions, genres, etc Formen eller genren for dokumentets innhold, f.eks kategorier, funksjoner, genrer, etc The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here Den fysiske eller digitale manifestasjon av dokumentet. Media type og dimensjoner ville være nyttige å merke seg. RFC2045,RFC2046 for MIME typer er også brukbare her An unambiguous reference to the document within a given context such as ISBN or URI En entydig referanse til dokumentet innenfor en gitt kontekst som ISBN eller URI A reference to a document from which the present document is derived, eg. ISBN or URI En referanse til et dokument hvor det nåværende dokument er derivert, f.eks ISBN eller URI The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH Språket som dokumentet er skrevet i, vanligvis en ISO-638 språk kode eventuelt fulgt av en dash og en ISO-3166 lande kode, f.eks nn-NO, nb-NO, fr-CH, en-GB A reference to a related document, possibly using a formal identifier such as a ISBN or URI En referanse til et relatert dokument, kanskje ved bruk av en formell henvisning som ISBN eller URI The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges Avgrensningen for dokumentets innhold, kanskje inkluderende sted, tid og juridisk virkningsområde Information about rights held in and over the document, eg. copyright, patent or trademark Informasjoner omkring rettigheter holdet i og over dokumentet, f.eks copyright, patent eller trademark &OK &Greit &Cancel &Avbryt Documen&t Dokumen&t The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH DocSections Add a page numbering section to the document. The new section will be added after the currently selected section. Delete the currently selected section. 1, 2, 3, ... 1, 2, 3, ... i, ii, iii, ... i, ii, iii, ... I, II, III, ... I, II, III, ... a, b, c, ... a, b, c, ... A, B, C, ... A, B, C, ... <b>Name:</b> Optional name for section eg. Index<br/><b>Shown:</b> Select to show the page numbers in this section if there is one or more text frames setup to do so.<br/><b>From:</b> The page index for this section to start at.<br/><b>To:</b> The page index for this section to stop at.<br/><b>Style:</b> Select the page number style to be used.<br/><b>Start:</b> The index within the Style's range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window. Page Number Out Of Bounds The value you have entered is outside the range of page numbers in the current document (%1-%2). Document Sections &Add &Legg til Alt+A Alt+A &Delete Alt+D Alt+D Name Navn Shown Vist From Fra To Til Style Stil Start Start DocSectionsBase Name Navn Active Aktiv From Fra To Til Style Stil Start Start End Slutt &Add &Legg til Alt+A Alt+A &Delete &Slett Alt+D Alt+D Shown Vist DocumentItemAttributes None Ingen Relates To Is Parent Of Is Child Of Text Frames Tekstramme Image Frames Boolean Boolsk Integer Heltall String Name Navn Type Type Value Verdi Parameter Parameter &Add &Legg til Alt+A Alt+A &Copy &Kopier Alt+C Alt+C &Delete &Delete Alt+D Alt+D C&lear T&øm Alt+L Alt+L None relationship Ingen None auto add Ingen None types Ingen Real Number Document Item Attributes Relationship Relationship To Auto Add To DocumentItemAttributesBase Name Navn Type Type Value Verdi Parameter Parameter &Add &Legg til Alt+A Alt+A &Copy &Kopier Alt+C Alt+C &Delete &Slett Alt+D Alt+D C&lear T&øm Alt+L Alt+L EPSPlug Importing File: %1 failed! Import av fil: %1 feilet! Fatal Error Alvorlig feil Error Feil Analyzing PostScript: Generating Items Converting of %1 images failed! Group%1 Importing: %1 EditMacroDialog Editing Macro: <b> Redigerer makro: <b> The file '%1' already exists. Are you sure you want to overwrite it? Filen '%1' finnes allerede. Er du sikker på at du vil overskrive den? Scribus - New Macro Scribus - Ny makro Editing Macro: Redigerer makro: The name of the macro being edited. Navnet på makroen som blir redigert. &Cancel &Avbryt Alt+C Alt+C <qt>Discard all changes and exit.</qt> <qt>Forkast alle endringer og avslutt.</qt> &Ok &Greit Alt+O Alt+O <qt>Save changes and exit.</qt> <qt>Lagre endringene og avslutt.</qt> Alt+L Alt+L &Save Source As... &Lagre kilden som ... Alt+S Alt+S EditStyle Edit Style Rediger stil Character Tegn pt pt Effect: Effekter: None Ingen Vertical Spaces Vertikal avstand Line Spacing Linjeavstand Tabulators and Indentation Tabulatorer og innrykk OK Greit Name of your paragraph style Navn på din avsnittsstil Font of selected text or object Skrifttypen til den markerte tekst eller objekt Font Size Skriftstørrelse Color of text fill Farge på tekstfyll Color of text stroke Farge på tekststrek Provides an oversized first letter for a paragraph. Used for stylistic effect Gir et ekstrastort førstebokstav til et avsnitt. Brukt som stileffekt Determines the overall height, in line numbers, of the Drop Caps Bestemmer høyden, i linjeantall, av Drop Caps Align text to baseline grid Juster tekst til baseline nettet Spacing above the paragraph Plass over avsnittet Spacing below the paragraph Plass under avsnittet mm mm in in p p Warning Advarsel Name of the Style is not unique Navnet på denne stilen er ikke entydig &Name: &Navn: &Font: &Skrifttype: Si&ze: Større&lse: &Alignment: &Justering: &Drop Caps &Fjern store bokstaver &Lines: &Linjer: F&ill Color: &Fyllfarge: St&roke Color: S&trekfarge: Adjust to Baseline &Grid Juster til baseline &nettet Line &Spacing: Linjeav&stand: Abo&ve: Ov&er: &Below: &Under: &OK &Greit &Cancel &Avbryt % % Distances Avstander Distance from Text: Avstand til tekst: Background Bakgrunn Auto Auto EditToolBar Edit Rediger Editor Editor Tekstbehandler Javascripts (*.js);;All Files (*) Javascripts (*.js);; Alle filtyper (*) &New &Ny &Open... &Åpne ... Save &As... Lagre &som ... &Save and Exit &Lagre og avslutt &Exit without Saving &Avslutt uten å lagre &Undo &Angre &Redo &Gjør omigjen Cu&t &Klipp ut &Copy K&opier &Paste &Lim inn C&lear T&øm &Get Field Names &Hent navn på felt &File &Fil &Edit &Rediger JavaScripts (*.js);;All Files (*) JavaScript (*.js);;Alle filer (*) Ctrl+N Ctrl+Z Ctrl+X Ctrl+C Ctrl-V EffectsDialog Image Effects Bildeeffekter Options: Innstillinger: Color: Farge: Shade: Skygge: Brightness: Contrast: Kontrast: Radius: Radius: Value: Verdi: Posterize: Available Effects Tilgjengelige effekter Blur Brightness Colorize Contrast Kontrast Grayscale Gråskala Invert Inverter Posterize Sharpen >> >> << << Effects in use Effekter i bruk OK Greit Cancel Avbryt Color 1: Color 2: Color 3: Color 4: Duotone Tritone Quadtone Curves ExportBitmap File exists. Overwrite? Filen eksisterer. Erstatt? exists already. Overwrite? finnes allerede. Erstatt? All Alle Save as Image Lagre som bilde Insufficient memory for this image size. Error writing the output file(s). Feil ved skriving av output filen(e). ExportForm Choose a Export Directory Velg en katalog for eksport &All pages &Alle sider &OK &Greit &Cancel &Avbryt Change the output directory Forandre utskriftskatalog The output directory - the place to store your images. Name of the export file will be 'documentname-pagenumber.filetype' Utskriftskatalogen - stedet for å lagre bildene dine. Navnet for den eksporterte fil vil være 'dokumentnavn-sidenummer.filtype' Export only the current page Eksporter kun gjeldene side Available export formats Tilgjengelige eksport formater C&hange... &Endre ... &Export to Directory: &Eksporter til katalog: Image &Type: Bilde&format: &Quality: &Kvalitet: Export as Image(s) Eksporter som bilde(r) Options Innstillinger &Resolution: &Oppløsning: % % dpi dpi Range Område &Current page &Gjeldende side &Range &Område C C Export a range of pages Eksporter et sett av sider Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Skriv inn en kommaseparert liste med tegn hvor tegnet * representerer alle sider, og 1-5 representerer en rekke sider, eller en enkelt side. Export all pages Eksporter alle sidene Resolution of the Images Use 72 dpi for Images intended for the Screen Oppløsning av bildene Bruk 72 dpi for bilder som er ment for skjermen The quality of your images - 100% is the best, 1% the lowest quality Bildekvalitet - 100% er best, 1% er lavest kvalitet &Size: &Størrelse: Size of the images. 100% for no changes, 200% for two times larger etc. Størrelse på bildene. 100% for ingen endring, 200% for dobbelt så stort etc. Image size in Pixels TextLabel The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use 'Automatic' Automatic Automatisk ExtImageProps Extended Image Properties Normal Normal Darken Lighten Hue Saturation Color Farge Luminosity Multiply Screen Skjerm Dissolve Oppløse Overlay Hard Light Soft Light Difference Forskjell Exclusion Color Dodge Color Burn Blend Mode: Opacity: Ugjennomsiktighet: % % Name Navn Background Bakgrunn Layers Lag Don't use any Path Paths Stier Live Preview FDialogPreview Size: Størrelse: Title: Tittel: No Title Ingen tittel Author: Forfatter: Unknown Ukjent Scribus Document Scribus dokument Resolution: Oppløsning: DPI DPI RGB RGB CMYK CMYK Grayscale Gråskala Colorspace: File Format: Farbmanager Colors Farger Color Sets Fargesett Current Color Set: Nåværende fargesett: Choose a color set to load Velg et fargesett å laste inn Save the current color set Lagre nåværende fargesett Remove unused colors from current document's color set Slett ikke-brukte farger fra dette dokuments fargesett Append colors to the current set from an existing document Legg til farger til nåværende sett fra et eksisterende dokument Create a new color within the current set Lag en ny farge innenfor det nåværende sett Edit the currently selected color Rediger den nåværende aktive farge Make a copy of the currently selected color Lag en kopi av den nåværende aktive farge Delete the currently selected color Slett den nåværende aktive farge Make the current colorset the default color set Sett det nåværende fargesett til standard fargesett Choose a Name Velg et navn Open Åpne Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumenter (*.sla *.sla.gz *.scd *scd.gz);; Alle filtyper (*) Documents (*.sla *.scd);;All Files (*) Dokumenter (*.sla *.scd);; Alle filtyper (*) Copy of %1 Kopi av %1 New Color Ny farge &Append &Legg til &New &Ny &Edit &Rediger D&uplicate D&upliker &Delete &Slett &Remove Unused &Fjern ubrukte &Save Color Set &Lagre fargevalg &OK &Greit &Cancel &Avbryt &Name: &Navn: None Ingen &Import &Importer FileLoader Some fonts used by this document have been substituted: Noen skrifttyper i dette dokumentet har blitt erstattet: was replaced by: ble erstatet av: FileToolBar File Fil FontComboH Face: Style: Stil: FontListModel Font Name Navn på skrifttype Use Font Bruk skrifttype Family Style Stil Variant Type Type Format Format Embed in PostScript Subset Senket skrift Access Used in Doc Path to Font File Sti til skrifttypefil Unknown font type Ukjent Unknown font format Ukjent User font preview Bruker System font preview System Click to change the value FontPrefs Global Font Settings Globale skrifttypeinnstillinger Available Fonts Tilgjengelige skrifttyper Font Substitutions Erstatningsskrifttyper Additional Paths Andre stier Postscript Postscript Yes Ja Font Name Navn på skrifttype Use Font Bruk skrifttype Embed in: Inkluder i: Subset Senket skrift Type Type Path to Font File Sti til skrifttypefil &Available Fonts &Tilgjengelige skrifttyper Replacement Erstatning Font &Substitutions &Erstatningsskrifttyper Additional &Paths Andre &stier Choose a Directory Velg en katalog &Delete &Slett C&hange... &Endre ... A&dd... &Legg til ... &Remove &Fjern &OK &Greit &Cancel &Avbryt Font Name font preview Navn på skrifttype Use Font font preview Bruk skrifttype Embed in: font preview Inkluder i: Subset font preview Senket skrift Path to Font File font preview Sti til skrifttypefil PostScript PostScript Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path. FontPreview &OK &Greit Alt+O Alt+O &Cancel &Avbryt Alt+C Alt+C Woven silk pyjamas exchanged for blue quartz Vevet silke pyjamas byttet for blå quartz Fonts Preview Forhåndsvisning av skrifttyper Leave preview Forlatt forhåndsvisning Font Name font preview Navn på skrifttype Type font preview Type Subset font preview Senket skrift Fonts Preview font preview Forhåndsvisning av skrifttyper &OK font preview &Greit Alt+O font preview Alt+O Quick Search: Raskt søk: &Search &Søk &Close font preview &Lukk Alt+C font preview Alt+C Leave preview font preview Forlatt forhåndsvisning Size of the selected font Woven silk pyjamas exchanged for blue quartz font preview User font preview Bruker System font preview System &Append &Legg til Font Name Navn på skrifttype Doc Doc Type Type Subset Senket skrift &Quick Search: Alt+S Alt+S &Font Size: &Skriftstørrelse: Text Tekst Sample text to display Se&t Alt+T Alt+T Reset the text Alt+A Alt+A &Close &Lukk Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring. &Default Show Extended Font Information Set the preview text FontPreviewBase Fonts Preview Forhåndsvisning av skrifttyper &Search &Søk Alt+S Alt+S Font Name Navn på skrifttype Doc Doc Type Type Subset Senket skrift &Font Size: &Skriftstørrelse: Text Tekst Alt+T Alt+T &Append &Legg til Alt+A Alt+A &Close &Lukk Alt+C Alt+C FontPreviewPlugin &Font Preview... &Forhåndsvisning av skrifttype ... Font Preview dialog Sorting, searching and browsing available fonts. FontReplaceDialog Font Substitution Original Font Substitution Font Make these substitutions permanent &OK &Greit This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading. Cancels these font substitutions and stops loading the document. Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts. If you select OK, then save, these substitutions are made permanent in the document. GradientEditor Position: Posisjon: % % Here you can add, change or remove Color-Stops. Her kan du legge til, forandre eller fjerne Color-Stops. Add, change or remove color stops here GradientVectorDialog Gradient Vector GuideManager Manage Guides Håndtering av hjelpelinjer pt pt mm mm in in p p Horizontal Guides Horisontale hjelpelinjer Vertical Guides Vertikale hjelpelinjer &Y-Pos: &Y-Pos: &Add &Legg til D&elete &Slett &X-Pos: &X-Pos: A&dd &Legg til De&lete &Slett &Lock Guides Lås hje&lpelinjer &OK &Greit &Cancel &Avbryt &Rows: &Rader: C&olumns: &Kolonner: &Page Si&de &Selection &Utvalg &Close &Lukk Preview Forhåndsvis &Single Horizontals Alt+A Alt+A Alt+E Alt+E Verticals Alt+D Alt+D Alt+L Alt+L Appl&y to All Pages Alt+Y &Column/Row &Number: U&se Gap: Alt+S Alt+S Refer To Alt+P Alt+P M&argins S&election Nu&mber: Use &Gap: Alt+G Alt+G &Misc Delete all guides from the current page Delete Guides from Current &Page Delete all guides from the current document Delete Guides from &All Pages Guide Manager Add a new horizontal guide Delete the selected horizontal guide Add a new vertical guide Delete the selected vertical guide Lock the guides Apply to all pages Number of horizontal guides to create Number of vertical guides to create Create rows with guides, with an additional gap between the rows Create columns with guides, with an additional gap between the columns Create the selected number of horizontal guides relative to the current page Create the selected number of horizontal guides relative to the current page's margins Create the selected number of horizontal guides relative to the current selection of items Create the selected number of vertical guides relative to the current page Create the selected number of vertical guides relative to the current page's margins Create the selected number of vertical guides relative to the current selection of items Apply the shown guides to all pages in the document Delete all guides shown on the current page Delete all guides from all pages GuideManagerBase Manage Guides Håndtering av hjelpelinjer &Add &Legg til Alt+A Alt+A D&elete &Slett Alt+E Alt+E A&dd &Legg til Alt+D Alt+D De&lete &Slett Alt+L Alt+L &Lock Guides Lås hje&lpelinjer Alt+S Alt+S Alt+G Alt+G Alt+P Alt+P HelpBrowser Sorry, no manual available! Please see: http://docs.scribus.net for updated docs and www.scribus.net for downloads. Beklager, ingen håndbok er tilgjengelig. Ta en titt på http://docs.scribus.net for oppdaterte håndbøker, og www.scribus.net for nye versjoner av Scribus. Contents Innhold Link Lenke Scribus Online Help Scribus Online hjelp &Contents &Innhold &Search &Søk Se&arch Sø&k &New &Nytt &Delete &Slett De&lete All Slett a&lle Book&marks Bok&merker &Print... Skriv &ut ... E&xit &Avslutt unknown ukjent Find Finn Search Term: Søk etter: New Bookmark Nytt bokmerke New Bookmark's Title: Navn på bokmerke: &File &Fil &Find... &Finn ... Find &Next Finn &neste Find &Previous Finn f&orrige &Edit &Rediger &Add Bookmark &Legg til D&elete All S&lett alle &Bookmarks &Bokmerker Relevance Relevans Scribus Help Searching is case insensitive 1 &Exit &Avslutt Find &Next... Find &Previous... &Add &Legg til &Quit <h2><p>Sorry, no manual is installed!</p><p>Please see:</p><ul><li>http://docs.scribus.net for updated documentation</li><li>http://www.scribus.net for downloads</li></ul></h2> HTML message for no documentation available to show HelpBrowser2 &Contents &Innhold Se&arch Sø&k &Search &Søk Book&marks Bok&merker HyAsk Possible Hyphenation Mulig orddeling Accept Aksepter Skip Hopp over Cancel Avbryt Add to the Exception List Add to the Ignore List HySettings Hyphenator Settings Orddelings innstillinger Length of the smallest word to be hyphenated. Lengden av det minste ord som deles. Maximum number of Hyphenations following each other. A value of 0 means unlimited hyphenations. Maksimum antall orddelinger som følger etter hverandre. 0 betyr uendelige orddelinger. &Language: &Språk: &Smallest Word: &Minste ord: &OK &Greit &Cancel &Avbryt Hyphenate Text Automatically &During Typing Bruk orddeling automatisk mens du skriver Enables automatic hyphenation of your text while typing. Skrur på automatisk orddeling mens du skriver. Ignore List Add a new Entry Edit Entry Exception List ImageInfoDialog Image Info Bilde info General Info Generell info Date / Time: Dato / Tid: Has Embedded Profile: Yes Ja No Nei Profile Name: Profilnavn: Has Embedded Paths: Has Layers: Inneholder lag: EXIF Info EXIF Info Artist: Artist: Comment: Kommentar: User Comment: Camera Model: Kamera modell: Camera Manufacturer: Description: Beskrivelse: Copyright: Copyright: Scanner Model: Skanner modell: Scanner Manufacturer: Exposure time Aperture: ISO equiv.: ImportAIPlugin Import AI... Imports Illustrator Files Imports most Illustrator files into the current document, converting their vector data into Scribus objects. The file could not be imported ImportDialog Choose Styles Velg stil Available Styles Tilgjengelige stiler ImportPSPlugin Import &EPS/PS... Importer &EPS/PS ... Imports EPS Files Importer EPS filer PostScript PostScript PDF PDF Import PostScript... Imports PostScript Files Imports most PostScript files into the current document, converting their vector data into Scribus objects. ImportXfigPlugin Import Xfig... Imports Xfig Files Imports most Xfig files into the current document, converting their vector data into Scribus objects. All Supported Formats Alle støttede formater Imposition Portrait Stående Landscape ImpositionBase Imposition Gri&d Copies Do&uble sided Alt+U Alt+U Front side Back side &Booklet Pages per sheet 4 8 16 Pages <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.</p></body></html> Fold Front page from Double sided Dobbeltsidig Back page from Destination page Size Størrelse Orientation Retning Width Bredde Height Høyde Preview Forhåndsvis Refresh preview &OK Alt+G Alt+G &Cancel &Avbryt Alt+C Alt+C ImpositionPlugin &Imposition... Imposition dialog Imposition on grids, booklets and folds InsPage Insert Page Sett inn side Inserting Setter inn before Page før side after Page etter side at End på slutten Normal Normal Template (Right Page): Mal (Høyre side): &Inserting &Setter inn Page(s) side(r) &Template (Left Page): &Mal (venstre side): &Template: &Mal: &OK &Greit &Cancel &Avbryt &Insert Sett &inn &Master Page: Master Pages Page Size Sidestørrelse &Size: &Størrelse: Custom Brukerdefinert Orie&ntation: Ret&ning: Portrait Stående Landscape Landskap &Width: &Bredde: &Height: &Høyde: Move Objects with their Page InsertAFrame Open Åpne Insert A Frame T&ype &Text Frame &Tekstramme Alt+T Alt+T &Image Frame &Bilderamme Alt+I Alt+I T&able T&abell Alt+A Alt+A Polygon Polygon &Location Page Placement Current Page All Pages Alle sider ... Position of Frame Top Left of Margins Top Left of Page Top Left of Bleed X: X: Y: Y: &Size &Størrelse Same as the Page Margins Same as the Page Same as the Bleed Same as the Imported Image Height: Høyde: Width: Bredde: &Options Source Image: Alt+S Alt+S There are no options for this type of frame Columns: Gap: Source Document: &Cancel &Avbryt Range of Pages Custom Position Custom Size <b>Insert a text frame</b><br/>A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.<br/>Your text may be edited and formatted on the page directly or in the Story Editor. <b>Insert an image frame</b><br/>An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette. Insert one or more text frames Insert one or more image frames Place the new frames on the current page, on all pages or on a selected range Insert the frame on the current page only Insert one frame for each existing page Insert frames on a range of pages Range of pages to insert frames on Position the new frame in relation to the page Insert the frame at the top left of the page margins Insert the frame at the top left of the page Insert the frame at the top left of the page bleed Insert the frame at a custom position on the page Top position of the inserted frame Left position of the inserted frame Insert the new frame with the same dimensions as the page margins Insert the new frame with the same dimensions as the page Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself Insert the new frame with the same dimensions as the image that will be imported Insert the new frame with a custom size Width of the inserted frame Height of the inserted frame Number of columns for the inserted text frame Distance between the columns in the text frame Link the inserted text frames together to form a chain of frames Link Inserted Frames Link the first inserted frame to a preexisting text frame Link to Existing Frame Name of existing text frame to link to Source document to load into the text frame Source image to load into the inserted image frame InsertAFrameBase &Text Frame &Tekstramme Alt+T Alt+T &Image Frame &Bilderamme Alt+I Alt+I T&able T&abell Alt+A Alt+A Polygon Polygon X: X: Y: Y: &Size &Størrelse Height: Høyde: Width: Bredde: Alt+S Alt+S &Cancel &Avbryt All Pages Alle sider InsertTable Insert Table Sett inn tabell Number of Rows: Antall rader: Number of Columns: Antall kolonner: OK Greit Cancel Avbryt Number of rows: Antall rader: Number of columns: Antall kolonner: &OK &Greit &Cancel &Avbryt JavaDocs Edit JavaScripts Rediger JavaScript New Script Nytt skript Warning Advarsel &Edit... &Rediger ... &Add... &Legg til ... &Delete &Slett &Close &Lukk &New Script: &Nytt skript: &No &nei &Yes &Ja Do you really want to delete this Script? Vil du virkelig slette dette skriptet? Do you really want to delete this script? Ønsker du virkelig å slette dette skriptet? Adds a new Script, predefines a function with the same name. If you want to use this script as an "Open Action" script be sure not to change the name of the function. KeyManager Manage Keyboard Shortcuts Håndtering av hurtigtaster Action Handling Current Key Nåværende hurtigtast Select a Key for this Action Velg en hurtigtast for denne handling ALT+SHIFT+T ALT + SHIFT + T Alt Alt Ctrl Ctrl Shift Shift Shift+ Shift+ Alt+ Alt+ Ctrl+ Ctrl+ Warning Advarsel &No Key &Ingen hurtigtast &User Defined Key Br&ukerdefinert hurtigtast Set &Key Sett hurti&gtast &OK &Greit &Cancel &Avbryt This Key Sequence is already in use Denne hurtigtasten er allerede i bruk &Load &Hent &Import... &Importer ... &Export... &Eksporter ... LatexEditor Enter Code: Update Revert Program Messages: Status: Unknown Kill Program Options Innstillinger Resolution: Oppløsning: Automatic Automatisk DPI Program: Use Preamble Status: Error Feil Finished Running No item selected! Insert symbol Editor Tekstbehandler Information Informasjon An editor for this frame is already running! Editor running! Please specify an editor in the preferences! Could not create a temporary file to run the external editor! Run External Editor... Running the editor failed with exitcode %d! Running the editor "%1" failed! Run external editor... LayerPalette Layers Lag Add a new Layer Tilføy et ny lag Delete Layer Slett lag Raise Layer Hev lag Lower Layer Senk lag New Layer Nytt lag Do you want to delete all Objects on this Layer too? Vil du også slette alle objekter på dette laget? Do you want to delete all objects on this layer too? Name Navn Add a new layer Legg et nytt lag Delete layer Slett lag Raise layer Hev lag Lower layer Senk lag Opacity: % % Blend Mode: Normal Normal Darken Lighten Multiply Screen Skjerm Overlay Hard Light Soft Light Difference Forskjell Color Dodge Color Burn Exclusion Hue Saturation Color Farge Luminosity Duplicates the current layer Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. Make Layer Visible - Uncheck to hide the layer from the display Print Layer - Uncheck to disable printing. Lock or Unlock Layer - Unchecked is unlocked Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects. Name of the Layer - Double clicking on the name of a layer enabled editing LegacyMode All Files (*) Alle filtyper (*) Open Åpne All Supported Formats Alle støttede formater LensDialogBase Optical Lens + - Lens Parameters Radius: Radius: Add a new lens &Add Lens Remove selected lens &Remove Lens Zoom In Zoom Out &X Pos: Horizontal position of the lens &Y Pos: Vertical position of the lens The selected lens acts like a magnification lens &Magnification Lens The selected lens acts like a fish eye lens &Fish Eye Lens Ra&dius: Radius of the lens &Strength: Strength of the lens LensEffectsPlugin Lens Effects... Path Tools Lens Effects Apply fancy lens effects LineFormate Edit Line Styles Rediger linjestiler Copy of %1 Kopi av %1 New Style Ny stil Warning Advarsel Open Åpne Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumenter (*.sla *.sla.gz *.scd *scd.gz);; Alle filtyper (*) Documents (*.sla *.scd);;All Files (*) Dokumenter (*.sla *.scd);; Alle filtyper (*) &Append &Legg til &New &Ny &Edit &Rediger D&uplicate D&upliker &Delete &Slett &Save &Lagre &OK &Greit &Cancel &Avbryt &No &Nei &Yes &Ja Do you really want to delete this Style? Vil du virkelig slette denne stilen? &Import &Importer Do you really want to delete this style? Ønsker du virkelig å slette denne stilen? LineStyleW % % LineStyleWBase % % LineStyleWidget pt pt Flat Cap Flat Cap Square Cap Firkant Cap Round Cap Rund Cap Bevel Join Bevel sammenføyning Round Join Rund sammenføyning Solid Line Heltrukken linje Dashed Line Prikket linje Dotted Line Prikket linje Dash Dot Line Bindestrek punktum linje Dash Dot Dot Line Bindestrek punktum punktum linje LoadSavePlugin All Files (*) Alle filtyper (*) No File Loader Plugins Found LoremManager Select Lorem Ipsum Velg Lorem Ipsum Author: Forfatter: Get More: Hent mer: XML File: XML fil: Lorem Ipsum Paragraphs: Avsnitt: &OK &Greit Alt+O Alt+O &Cancel &Avbryt Alt+C Alt+C Standard Lorem Ipsum Random Paragraphs Number of paragraphs of selected sample text to insert List of languages available to insert sample text in MSpinBox pt pt pt pt mm mm in in p p mm mm in in p p MacroManager Manage Macros Behandle makroer Brings up a graphical window for creating, deleting, editing, saving and loading macros. Starter et grafisk vindu for opprettelse, sletting, redigering, lagring og lasting av makroer. Create, edit and delete macros Lag, rediger eller slett makroer &Macro &Makro Scribus - Macro Manager Scribus - Makro behandler Unable to open the requested file: %1 Klarte ikke å åpne fila: %1 Scribus - Edit Macro Scribus - Rediger makro <qt>The macro name you requested is already taken by another macro.</qt> <qt>Navnet du valgte for din makro er allerede gitt til en annen makro.<qt> ManageMacrosDialog Scribus - Macro Manager Scribus - Makro behandler Scribus - Manage Macros Scribus - Behandle makroer &New &Ny Alt+N Alt+N <qt>Create a new macro.</qt> <qt>Lag en ny makro.</qt> &Ok &Greit Alt+O Alt+O Close this dialog. Avslutt denne dialogen Return to Scribus. Gå tilbake til Scribus Macro Makro Edit Rediger Description Beskrivelse Rena&me Gi &nytt navn Alt+M Alt+M Rename the selected macro. Gi nytt navn til den valgte makroen. &Edit... &Rediger ... Alt+E Alt+E &Delete &Delete Alt+D Alt+D Alt+S Alt+S E&xport E&ksport Alt+X Alt+X Export macros to a file. Eksporter makroer til en fil. Delete &All Slett &alle Alt+A Alt+A Delete all macros. Slett alle makroer. &Import &Importer Alt+I Alt+I MarginDialog Margin Guides &OK &Greit &Cancel &Avbryt Manage Page Properties Page Size Sidestørrelse &Size: &Størrelse: Custom Brukerdefinert Orie&ntation: Ret&ning: Portrait Stående Landscape Landskap &Width: &Bredde: &Height: &Høyde: Move Objects with their Page Type: Type: Other Settings Master Page: Normal Normal Size of the inserted pages, either a standard or custom size. Orientation of the page(s) to be inserted Width of the page(s) to be inserted Height of the page(s) to be inserted When inserting a new page between others, move objects with their current pages. This is the default action. MarginWidget &Bottom: &Bunn: &Top: &Topp: &Right: &Høyre: &Left: &Venstre: Distance between the top margin guide and the edge of the page Distance between the bottom margin guide and the edge of the page &Inside: O&utside: Preset Layouts: Apply the margin changes to all existing pages in the document Printer Margins... Import the margins for the selected page size from the available printers. Apply settings to: All Document Pages All Master Pages Apply the margin changes to all existing master pages in the document Margin Guides Top: Bottom: Distance for bleed from the top of the physical page Avstand for bleed fra toppen av den fysiske siden Distance for bleed from the bottom of the physical page Avstand for bleed fra bunnen av den fysiske siden Distance for bleed from the left of the physical page Avstand for bleed fra venstresiden av den fysiske siden Distance for bleed from the right of the physical page Avstand for bleed fra høyresiden av den fysiske siden Bleeds Inside: Outside: Left: Right: Høyre: Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding MasterPagesPalette Edit Master Pages Warning Advarsel Do you really want to delete this master page? &No &Nei &Yes &Ja &Name: &Navn: New Master Page Copy of %1 Kopi av %1 Name: Navn: New MasterPage Copy #%1 of Kopi #%1 av Normal Normal Duplicate the selected master page Delete the selected master page Add a new master page Import master pages from another document New Master Page %1 Unable to Rename Master Page The Normal page is not allowed to be renamed. Rename Master Page New Name: Copy #%1 of %2 Mdup Multiple Duplicate Dupliker flere ganger pt pt mm mm in in p p &Number of Copies: &Antall kopier: &Horizontal Shift: &Horisontale forskyvning: &Vertical Shift: &Vertikal forskyvning: &OK &Greit &Cancel &Avbryt Measurements Distances Avstander X1: X1: Y1: Y1: X2: X2: Y2: Y2: DX: DX: DY: DY: Angle: Vinkel: Length: Lengde: pt pt mm mm in in p p pt pt ° MeasurementsBase Distances Avstander X1: X1: 10000.0000 Y1: Y1: X2: X2: Y2: Y2: Length: Lengde: DX: DX: DY: DY: Angle: Vinkel: MenuTest Script error Script feil If you are running an official script report it at <a href="http://bugs.scribus.net">bugs.scribus.net</a> please. Hvis du kjører et offisielt skript reporter det vennligst til <a href="http://bugs.scribus.net">bugs.scribus.net</a>. Show &Console Vis &konsollen Hide &Console Skjul &konsollen This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker. Denne meldingen er overført til ditt klippebord, bruk Ctrl+V for å lime den inn i feilmeldingssøkeren. MergeDoc Change... Endre ... Import Importer Cancel Avbryt Open Åpne Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*) Dokumenter (*.sla *.sla.gz *.scd *scd.gz);;Alle filtyper (*) Documents (*.sla *.scd);;All Files (*) Dokumenter (*.sla *.scd);;Alle filtyper (*) Import Template Importer en mal Import Page(s) Importer side(r) From Document: Fra dokument: Import Page(s): Importer side(r): Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Skriv inn en kommaseparert liste med tegn hvor tegnet * representerer alle sider, og 1-5 representerer en rekke sider, eller en enkelt side. from 0 fra 0 Create Page(s) Lag side(r) before Page før side after Page etter side at End på slutten from %1 fra %1 Import Master Page &From Document: &Fra dokument: Chan&ge... E&ndre ... &Import Page(s): &Importer side(r): &Import Master Page Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Before Page Før side After Page Etter side At End På slutten &Import &Importer &Cancel &Avbryt MeshDistortionDialog + - Mesh Distortion Drag the red handles with the mouse to distort the mesh Zoom In Zoom Out Resets the selected handles to their initial position. If no handle is selected all handles will be reset. &Reset MeshDistortionPlugin Mesh Distortion... Path Tools Mesh Distortion of Polygons MissingFont Missing Font Manglende skrifttype The Font %1 is not installed. Skrifttypen %1 er ikke installert. Use Bruk instead i stedet &OK &Greit ModeToolBar Tools Verktøy Properties... Egenskaper ... MovePages Move Pages Flytt sider Copy Page Kopier side Move Page(s): Flytt side(r): to: til: before Page før side after Page etter side at End på slutten &OK &Greit &Cancel &Avbryt Move Page(s) Flytt side(r) Before Page Før side After Page Etter side At End På slutten To: Til: Number of copies: Antall kopier: MultiLine Edit Style Rediger stil Flat Cap Flat Cap Square Cap Firkant Cap Round Cap Rund Cap Miter Join Midt sammenføyning Bevel Join Bevel sammenføyning Round Join Rund sammenføyning Line Width: Linjetykkelse: pt pt % % OK Greit pt pt Solid Line Heltrukken linje Dashed Line Prikket linje Dotted Line Prikket linje Dash Dot Line Bindestrek punktum linje Dash Dot Dot Line Bindestrek punktum punktum linje Warning Advarsel Name "%1" isn't unique. Please choose another. Navnet "%1" er ikke entydig. Vennligst velg et annet navn. &OK &Greit &Cancel &Avbryt Name "%1" isn't unique.<br/>Please choose another. Navnet "%1" er ikke unikt. <br/>Velg et annet. pt pt MultiProgressDialog Progress Fremgang Overall Progress: &Cancel &Avbryt %v of %m MultiProgressDialogBase Progress Fremgang &Cancel &Avbryt MultipleDuplicate &Horizontal Shift: &Horisontale forskyvning: &Vertical Shift: &Vertikal forskyvning: &Horizontal Gap: &Vertical Gap: Multiple Duplicate Dupliker flere ganger &By Number of Copies &Number of Copies: &Antall kopier: &Shift Created Items By Alt+S Alt+S Create &Gap Between Items Of Alt+G Alt+G Rotation: By &Rows && Columns Vertical Gap: Horizontal Gap: Number of Rows: Antall rader: Number of Columns: Antall kolonner: &OK &Cancel &Avbryt MultipleDuplicateBase Multiple Duplicate Dupliker flere ganger &Number of Copies: &Antall kopier: Alt+G Alt+G Alt+S Alt+S &Horizontal Shift: &Horisontale forskyvning: &Vertical Shift: &Vertikal forskyvning: Number of Rows: Antall rader: Number of Columns: Antall kolonner: &Cancel &Avbryt MusterSeiten Edit Templates Rediger maler Warning Advarsel Name: Navn: New Template Ny mal Copy of %1 Kopi av %1 Copy #%1 of Kopi #%1 av Normal Normal &Append &Legg til &New &Ny D&uplicate D&upliker &Delete &Slett &Close &Lukk &No &No &Yes &Ja &Name: &Navn: Do you really want to delete this Template? Vil du virkelig slette denne malen? MyPlugin My &Plugin Min &Plugin MyPluginImpl Scribus - My Plugin Scribus - Min Plugin The plugin worked! Plugin virket! NewDoc pt pt mm mm in in p p New Document Nytt Dokument Page Size Sidestørrelse Custom Brukerdefinert Portrait Stående Landscape Landskap Margin Guides Marg hjelpelinjer Options Innstillinger Points (pts) Punkter (pts) Millimetres (mm) Millimeter (mm) Inches (in) Tommer (in) Picas (p) Picas (p) Column Guides Kolonne hjelpelinjer Document page size, either a standard size or a custom size Dokument side størrelse, enten en standard størrelse eller en brukerdefinert størrelse Orientation of the document's pages Retning for dokumentets sider Width of the document's pages, editable if you have chosen a custom page size Bredde av dokumentets sider, kun redigerbar hvis du har valgt en brukerdefinert sidestørrelse Height of the document's pages, editable if you have chosen a custom page size Høyde av dokumentets sider, kun redigerbar hvis du har valgt en brukerdefinert sidestørrelse Enable single or spread based layout Aktiver singel eller spredt basert layout Make the first page the left page of the document Lag første side venstre side av dokumentet Distance between the top margin guide and the edge of the page Avstanden mellom topp hjelpemarg og sidens kant Distance between the bottom margin guide and the edge of the page Avstanden mellom bunn hjelpemarg og sidens kant Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Hvis Avstand mellom venstre hjelpemarg og sidens kant. Hvis Motstående Sider er markert kan denne brukes til å få til den korrekte marg for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Avstand mellom høyre hjelpemarg og sidens kant. Hvis Motstående Sider er markert kan denne brukes til å få til den korrekte marg for binding First page number of the document Første sidenummer av dokumentet Default unit of measurement for document editing Standard enhet for måling ved dokument redigering Create text frames automatically when new pages are added Lag tekst rammer automatisk når nye sider er tilføyet Number of columns to create in automatically created text frames Antall kolonner som blir laget i automatisk lagde tekstrammer Distance between automatically created columns Avstand mellom automatisk lagde kolonner Legal Legal Letter Letter Tabloid Tabloid &Size: &Størrelse: Orie&ntation: Ret&ning: &Width: &Bredde: &Height: &Høyde: &Facing Pages &Motstående sider Left &Page First Venstre &side først &Left: &Venstre: &Right: &Høyre: &Top: &Topp: &Bottom: &Bunn: F&irst Page Number: Fø&rste sidenummer: &Default Unit: Stan&dard enhet: &Automatic Text Frames Automatiske t&ekstrammer &Gap: &Mellomrom: Colu&mns: Kolo&nner: &OK &Greit &Cancel &Avbryt &Inside: &Innenfor: O&utside: U&tenfor: Executive Executive Folio Folio Open Document Åpne dokument Recent Documents Nylig åpnede dokumenter Do not show this dialog again Ikke vis denne dialogboksen igjen Initial number of pages of the document Antall sider i dette dokumentet N&umber of Pages: Antall s&ider: Documents (*.sla *.sla.gz *.scd *.scd.gz);; Dokumenter (*.sla *.sla.gz *.scd *.scd.gz);; Documents (*.sla *.scd);; Dokumenter (*.sla *.scd);; Postscript Files (*.eps *.EPS *.ps *.PS);; Postscript filer (*.eps *.EPS *.ps *.PS);; SVG Images (*.svg *.svgz);; SVG bilder (*.svg *.svgz);; SVG Images (*.svg);; SVG bilder (*.svg);; OpenOffice.org Draw (*.sxd);; OpenOffice.org Draw (*.sxd);; All Files (*) Alle filtyper (*) Open Åpne &New Document &Nytt dokument Open &Existing Document Åpne &eksisterende dokument Open Recent &Document Nylig åpnede &dokumenter Page Layout Side utseende First Page is: Første side er: Show Document Settings After Creation Document Layout NewFromTemplatePlugin New &from Template... Ny &fra mal ... Load documents with predefined layout Start a document from a template made by other users or yourself (f.e. for documents you have a constant style). NewTm Left Page Venstre side Right Page Høyre side &OK &Greit &Cancel &Avbryt NodePalette Nodes Noder Move Nodes Flytt noder Move Control Points Flytt kontrollpunkter Add Nodes Legg til noder Delete Nodes Slett noder Reset Control Points Nullstill Kontrollpunktene Reset this Control Point Nullstill dette kontrollpunkt When checked use Coordinates relative to the Page, otherwise Coordinates are relative to the Object. Hvis markert bruker Koordinater relativt til Siden, ellers er Koordinater relative til Objektet. &Absolute Coordinates &Absolutte Koordinater &X-Pos: &X-Posisjon: &Y-Pos: &Y-Posisjon: Edit &Contour Line Rediger &konturlinjer &Reset Contour Line Nullstill kontu&rlinjer &End Editing Avslutt r&edigeringen Move Control Points Independently Beveg kontrollpunkter uavhengig Move Control Points Symmetrical Beveg kontrollpunkter symmetrisk Open a Polygon or Cuts a Bezier Curve Åpen en Polygon eller skjærer en bezierkurve Close this Bezier Curve Lukk denne bezierkurve Mirror the Path Horizontally Speil stien horisontalt Mirror the Path Vertically Speil stien vertikalt Shear the Path Horizontally to the Left Shear stien horisontalt til venstre Shear the Path Vertically Up SHera stien horisontalt opp Shear the Path Vertically Down Shear stien vertikalt ned Rotate the Path Counter-Clockwise Roter stien mot klokka Rotate the Path Clockwise Roter stien med klokka Reduce the Size of the Path by shown % Reduser stiens størrelse med viste % Enlarge the Size of the Path by shown % Forstørr stiens størrelse med viste % Angle of Rotation Rotasjonsvinkel % to Enlarge or Reduce By % å forstørre eller forminske med Activate Contour Line Editing Mode Aktiver konturlinjeediteringsmodus Reset the Contour Line to the Original Shape of the Frame Tilbakestill konturlinjen til objektets originale form Shear the Path Horizontally to the Right ShearShear stien horisontalt til høyre % % When checked use coordinates relative to the page, otherwise coordinates are relative to the Object. Shrink the Size of the Path by shown % Reduce the Size of the Path by the shown value Enlarge the Size of the Path by the shown value % to Enlarge or Shrink By Value to Enlarge or Shrink By Set Contour to Image Clip Reset the Contour Line to the Clipping Path of the Image to Canvas to Page OODPlug This document does not seem to be an OpenOffice Draw file. Dette dokumentet ser ikke ut til å være et OpenOffice.org Draw (Tegning) dokument. Group%1 OODrawImportPlugin Import &OpenOffice.org Draw... Importer &OpenOffice.org Draw... Imports OpenOffice.org Draw Files Importerer OpenOffice.org Draw filer Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects. Importerer de fleste OpenOffice.org Draw filene inn i det gjeldene dokumentet, ved å konvertere deres vektordata til Scribus objekter. OpenDocument 1.0 Draw Import/export format name OpenDocument 1.0 Draw OpenOffice.org 1.x Draw Import/export format name OpenOffice.org 1.x Draw This file contains some unsupported features The file could not be imported OdtDialog OpenDocument Importer Options Opsjoner for import av OpenDocument Overwrite Paragraph Styles Enabling this will overwrite existing styles in the current Scribus document Merge Paragraph Styles Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently. Use document name as a prefix for paragraph styles Bruk filnavnet som begynnelse på navnet på stilen til avsnittet Prepend the document name to the paragraph style name in Scribus. Do not ask again Ikke spør igjen Make these settings the default and do not prompt again when importing an OASIS OpenDocument. OK Greit Cancel Avbryt OldScribusFormat Scribus Document Scribus dokument Scribus 1.2.x Document Scribus 1.2.x dokument OneClick Origin Size Størrelse Width: Bredde: Length: Lengde: Height: Høyde: Angle: Vinkel: Remember Values OutlinePalette Element Element Name "%1" isn't unique.<br/>Please choose another. Navnet "%1" er ikke unikt. <br/>Velg et annet. Group Gruppe Page Side Free Objects Frie objekter Outline Oversikt Enter a keyword or regular expression to filter the outline. Ctrl+f Filter the Outline using a keyword Filter: OutlineValues % % Linewidth Linjebredde PConsole Script Console Skript konsoll PDFExportDialog Save as PDF Lagre som PDF O&utput to File: &Send til fil: Cha&nge... E&ndre ... Output one file for eac&h page Lag en fil for &hver side &Save &Lagre Save as Lagre som PDF Files (*.pdf);;All Files (*) PDF Filer (*.pdf);;Alle filtyper (*) This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing. The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab. %1 does not exists and will be created, continue? Cannot create directory: %1 PDFLibCore Saving PDF Exporting Master Page: Exporting Page: Exporting Items on Current Page: Page: Side: Date: Failed to load an image : %1 Failed to write an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image A write error occured, please check available disk space PDFToolBar PDF Tools PDF Verktøy PDF_Opts Export Range Eksporter område File Options Fil innstillinger Left Margin Venstre marg Right Margin Høyre marg dpi dpi Image Settings Bilde innstillinger Automatic Automatisk JPEG JPEG Zip Zip None Ingen Maximum Maksimum High Høyde Medium Medium Low Lav Minimum Minimum &General &Generelt Embedding Inkluder Available Fonts: Tilgjengelige skrifttyper: Fonts to embed: Skrifttyper som skal inkluderes: &Fonts &Skrifttyper Page Side Effects Effekter sec sec No Effect Ingen effekt Blinds Persienner Box Boks Dissolve Oppløse Glitter Glitter Split Dele Wipe Tørk av Horizontal Horisontalt Vertical Vertikalt Inside Innenfor Outside Ytterside Left to Right Venstre mot høyre Top to Bottom Topp til bunn Bottom to Top Bunn til topp Right to Left Høyre mot venstre Top-left to Bottom-Right Topp-venstre til Bunn-Høyre Passwords Passord Settings Innstillinger General Generelt Screen / Web Skjerm / Web Printer Skriver Solid Colors: Massive farger: Profile: Profil: Rendering-Intent: Rendering-Intent: Perceptual Perceptual Relative Colorimetric Relative Colorimetric Saturation Metning Absolute Colorimetric Absolutt Colorimetric Images: Bilder: Don't use embedded ICC profiles Ikke bruk inkluderte ICC profiler PDF/X-3 Output Intent PDF/X-3 Output Intent Trim Box Trim boks pt pt mm mm in in p p Export all pages to PDF Eksporter alle sider til PDF Export a range of pages to PDF Eksporter et område av sider til PDF Determines the PDF compatibility. The default is Acrobat 4.0 which gives the widest compatibility. Choose Acrobat 5.0 if your file has PDF 1.4 features such as transparency or you require 128 bit encryption. PDF/X-3 is for exporting the PDF for commercial printing and is selectable when you have activated color management. Bestemmer PDf kompatibiliteten. Standard er Acrobat 4.0 som gir den største kompatibilitet. Velg Acrobat 5.0 hvis din fil har PDF 1.4 egenskaper som gjennomsiktighet eller hvis du trenger 128 bit kryptering. PDF/X-3 er for å eksportere PDf til kommersiell printing og kan kan velges dersom du har aktivert farge management. Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left. Bestemmer bindingen av sider i PDFen. Hvis ikke du er sikker på at du må forandre det, bruk Venstre. Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation. Lager thumbnails av hver side i PDFen. Noen visere kan bruke thumbnails for navigering. Generate PDF Articles, which is useful for navigating linked articles in a PDF. Lag PDF artikler, noe som er nyttig for å navigere lenkede artikler i en PDF. Embed the bookmarks you created in your document. These are useful for navigating long PDF documents. Legg inn bokmerkene du lagde i ditt dokument. Disse er nyttige for å navigere i lange PDF filer. Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos. Eksporter resolutionen til tekst og vektor grafikk. Dette har ingen innflytelse på oppløsningen til bitmap bilder som fotografier. Compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF size. Komprimering av tekst og grafikk. Hvis ikke du har noen grunn, bruk dette. Det reduserer PDF størrelsen. Version of compression for images. Automatic allows Scribus to choose the best method. ZIP is good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image loss possible). Leave it set to automatic, unless you have a need for special compression options. Versjon av komprimering for bilder. Automatisk tillater Scribus å velge den beste metoden. ZIP er bra for bilder med solide farger. JPEG er bedre for å lage små PDF filer som har mane fotografier (mens det kan forekomme tap i bildekvaliteten). La det stå på automatisk, hvis ikke du har en spesiell grunn til å endre det. Compression levels: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%) Komprimeringsnivåer: Minimum (25%), Lavt (50%), Medium (75%), Høyt (85%), Maksimum (95%) Downsample your bitmap images to the selected DPI. Leaving this unchecked will render them at their native resolution. Nedgrader dine bitmap bilder til den valgte DPI. Hvis du ikke velger dette vil de bruke sin egen oppløsning. DPI (Dots Per Inch) for image export. DPI (Prikker per Tomme) for bilde eksportering. Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document. Inkluder skrifttyper i PDFen. Dette vil bety at layouten og utseendet av ditt dokument vil bli beholdt. Enables presentation effects when using Acrobat Reader in full screen mode. Aktiverer presentasjonseffekter når du bruker Acrobat Reader i fullskjerm modus. Show page previews of each page listed above. Vis sideforhåndsvisning av alle de ovenfor valgte sider. Length of time the page is shown before the presentation starts on the selected page. Tidsrom siden er vist før presentasjonen starter på den valgte siden. Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down. Tidsrom effekten varer. Et mindre tidsrom betyr at effekten vil gå fortere, et lengre vil gjøre at den går langsommere Type of the display effect. Type av visningseffekt. Direction of the effect of moving lines for the split and blind effects. Retning på bevegende linjer for split og blining effektene. Starting position for the box and split effects. Startposisjonen av boks og splitt effektene. Direction of the glitter or wipe effects. Retningen på glitter eller wipe effektene. Apply the selected effect to all pages. Bruk effekt på alle sider. Enable the security features in your exported PDF. If you selected Acrobat 4.0, the PDF will be protected by 40 bit encryption. If you selected Acrobat 5.0, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations. Aktiver sikkerhetsfunksjoner i din eksporterte PDF. Hvis du valgte Acrobat 4.0, vil PDFen bli beskyttet av 40 bit kryptering. Hvis du valgte Acrobat 5.0, vil PDFen bli beskyttet av 128 bit kryptering. Disclaimer: PDF kryptering er ikke like sikker som GPG eller PGP kryptering og har en del begrensninger. Choose a master password which enables or disables all the security features in your exported PDF Velg et hovedpassord som aktiverer og deaktiverer alle sikkerhetsfunksjonen i din eksporterte PDF Choose a password for users to be able to read your PDF. Velg et passord så brukere kan lese din PDF. Allow printing of the PDF. If un-checked, printing is prevented. Tillat utskriving av PDFen. Allow modifying of the PDF. If un-checked, modifying the PDF is prevented. Tillat forandring av PDfen. Allow copying of text or graphics from the PDF. If un-checked, text and graphics cannot be copied. Tillat kopiering av tekst eller grafikk fra PDFen. Allow adding annotations and fields to the PDF. If un-checked, editing annotations and fileds is prevented. Tillat tilføyning av merknader og felter til PDFen. Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Fargemodell for utgivelse av din PDF. Velg Skjerm/Web for PDFer som skal vises på skjerm eller for å skrive på vanlige inkjets. Velg Skriver når du skal skrive på en riktig 4 farge CMYK skriver. Embed a color profile for solid colors Legg inn en fargeprofil for mettede farger Color profile for solid colors Fargeprofil for mettede farger Rendering intent for solid colors Rendering intent for mettede farger Embed a color profile for images Legg inn en farge profil for bilder Do not use color profiles that are embedded in source images Ikke bruk farge profiler som er lagt inn i bildene Color profile for images Farge profil for bilder Rendering intent for images Rendering intent for bilder Output profile for printing. If possible, get some guidance from your printer on profile selection. Utgivelse profil for utskrift. hvis mulig, få noe rådgiving fra din skriver når du velger. Mandatory string for PDF/X-3 or the PDF will fail PDF/X-3 conformance. We recommend you use the title of the document. Nødvendig tekstbit for PDF/X-3. Ellers vil PDFen ikke følge PDF/X3-conformance. Vi foreslår at du bruker dokumentets tittel. Distance for bleed from the top of the physical page Avstand for bleed fra toppen av den fysiske siden Distance for bleed from the bottom of the physical page Avstand for bleed fra bunnen av den fysiske siden Distance for bleed from the left of the physical page Avstand for bleed fra venstresiden av den fysiske siden Distance for bleed from the right of the physical page Avstand for bleed fra høyresiden av den fysiske siden Save as Lagre som Create PDF File Lag PDF-fil O&utput to File: &Send til fil: Cha&nge... E&ndre ... &All Pages &Alle sider C&hoose Pages &Velg sider Compatibilit&y: Kompatibil&itet: &Binding: Inn&binding: Generate &Thumbnails Lag &Thumbnailer Save &Linked Text Frames as PDF Articles Lagre &lenkede tekstrammer som PDF artikler &Include Bookmarks &Inkluder bokmerker &Resolution: &Oppløsning: &Method: &Metode: &Quality: &Kvalitet: &Downsample Images to: &Forminsk bildene til: &Embed all Fonts &Inkluder alle skrifttyper &>> &>> &<< &<< Show Page Pre&views &Vis forhåndsvisning av sidene &Display Duration: &Vis varighet: Effec&t Duration: &Varighet på effekten: Effect T&ype: Effektt&ype: &Moving Lines: Beve&gelige linjer: F&rom the: F&ra: D&irection: Retn&ing: &Apply Effect on all Pages &Bruk effekten på alle sidene &Use Encryption &Bruk kryptering &User: &Bruker: &Owner: &Eier: Allow &Printing the Document &Godta utskrift av dokumentet Allow &Changing the Document &Godta endringer i dokumentet Allow Cop&ying Text and Graphics &La andre kopiere tekst og bilder Allow Adding &Annotations and Fields La andre legge til nye &kommentarer og felt S&ecurity S&ikkerhet Output &Intended For: Utskrift Be&regnet for: &Use Custom Rendering Settings &Bruk eget framvisningsoppsett Rendering Settings Framvisningsoppsett Fre&quency: Hy&ppighet: &Angle: &Vinkel: S&pot Function: S&pot funksjon: Simple Dot Enkel prikk Line Linje Round Rund Ellipse Ellipse Use ICC Profile Bruk ICC profil C&olor F&arge &Info String: &Informasjons streng: Output &Profile: Output &Profil: PDF/X-&3 PDF/X-&3 &Save &Lagre &Cancel &Avbryt Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Skriv inn en kommaseparert liste med tegn hvor tegnet * representerer alle sider, og 1-5 representerer en rekke sider, eller en enkelt side. PDF Files (*.pdf);;All Files (*) PDF Filer (*.pdf);;Alle filtyper (*) This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems. Dette er en avansert innstilling som ikke er tilgjengelig som standard. Du bør bare bruke dette hvis skriveren ber spesielt om det og du vet nøyaktig hvilke innstillinger du trenger. Hvis du gjør det feil kan det hende pdf-fila ikke kan skrives ut på rett vis, og er absolutt ikke overførbart mellom ulike plattformer. Compress Text and &Vector Graphics Komprimer tekst og &vektorgrafikk En&able Presentation Effects Br&uk presentasjons effekter &Presentation &Presentasjon &Rotation: &Rotasjon: Mirror Page(s) horizontally Speilvend siden(e) horisontalt Mirror Page(s) vertically Speilvend siden(e) vertikalt Save as PDF Lagre som PDF Output one file for eac&h page Lag en fil for &hver side PDFlib Page: Side: PPreview Print Preview Forhåndsvisning av utskrift Provides a more pleasant view of text items in the viewer, at the expense of a slight slowdown in previewing. This only affects Type 1 fonts Gir en penere visning av tekst i viseren, men forhåndsvisning blir litt langsommere. Har kun effekt på Type 1 skrifttyper Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later Viser gjennomsiktighet og gjennomsiktige objekter i dokumentet ditt. Trenger Ghostscript 7.07 eller senere Gives a print preview using simulations of generic CMYK inks, instead of RGB colors Gir en utskrifsforhåndsvisning ved bruk av simulasjoner for generelle CMYK blekk, istedenfor RGB farger Enable/disable the C (Cyan) ink plate Aktiver/deaktiver C (Cyan) blekkplate Enable/disable the M (Magenta) ink plate Aktiver/deaktiver M (Magenta) blekkplate Enable/disable the Y (Yellow) ink plate Aktiver/deaktiver Y (Yellow) blekkplate Enable/disable the K (Black) ink plate Aktiver/deaktiver K (Black) blekkplate All Alle Anti-alias &Text Anti-alias &tekst Anti-alias &Graphics Anti-alias &grafikk Display Trans&parency Vis gjennoms&iktighet &Display CMYK &Vis CMYK &C &C &M &M &Y &Y &K &k &Under Color Removal &Under fargefjernelse A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. En måte å skru av noen av de gråskygger som er laget av cyan, gult og magenta rød ved å bruke svart istedenfor. UCR virker best på deler av bilder som er nøytrale og/eller mørke toner som ligger nært opptil grått. Bruk dette for å få utsftening enkelteoen bilder til å se bedre; og noe eksperimentering og testing er nødvendig neste gang. UCR reduserer muligheten for overmettning med CMY farger. Warning Advarsel Abort Avbryt Ignore Ignoreer Separation Name Cyan Cyan Magenta Magenta Yellow Gult Black Svart Scaling: Skala: Print... Skriv ut ... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. Resize the scale of the page. Close Lukk File Fil Enable &Antialiasing Fit to Width Fit to Height Fit to Page Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing Display Settings Print Settings Mirror Page(s) Horizontal Speilvend siden(e) horisontalt Mirror Page(s) Vertical Speilvend siden(e) vertikalt Clip to Page Margins Print in Grayscale Convert Spot Colors Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Apply Color Profiles Allows you to embed color profiles in the print stream when color management is enabled PSLib Processing Master Page: Exporting Page: Failed to write data for an image Failed to load an image : %1 Failed to load an image mask : %1 Insufficient memory for processing an image PStyleW Properties Egenskaper Tabulators and Indentation Tabulatorer og innrykk PStyleWBase Properties Egenskaper Tabulators and Indentation Tabulatorer og innrykk Page Copy Here Kopier hit Move Here Flytt hit Cancel Avbryt Picture Bilde File: Fil: Linked Text Lenket tekst Text Frame Tekstramme Text on a Path Legg tekst til sti Paragraphs: Avsnitt: Words: Ord: Chars: Tegn: Print: Skriv ut: Enabled I bruk Disabled Ikke i bruk Edit Text... Rediger tekst ... None Ingen The Program Programmet is missing! mangler! Warning Advarsel Copy of Kopi av &Paste &Lim inn Show &Margins Vis &marger Show &Frames Vis &rammer Show &Images Vis b&ilder Show &Grid Vis &gitter Show G&uides Vis h&jelpelinjer Show &Baseline Grid Vis &Baseline gitter Sn&ap to Grid F&est til gitter Sna&p to Guides Fest til hjel&pelinjer Original PPI: Original PPI: Actual PPI: Faktisk PPI: In&fo In&fo &Get Picture... &Hent bilde ... I&mage Visible V&is bilde &Update Picture &Oppdater bilde &Edit Picture &Rediger bilde &Adjust Frame to Picture Juster r&amme til bilde &Get Text... &Hent tekst ... &Append Text... &Legg til tekst ... &Edit Text... R&ediger tekst ... &Insert Sample Text Sett &inn eksempeltekst Is PDF &Bookmark Er et PDF &bokmerke Is PDF A&nnotation Er PDF komme&ntar Annotation P&roperties Kommenta&r egenskaper Field P&roperties Felt egenskape&r &PDF Options &PDF opsjoner &Lock &Lås Un&lock &Lås opp Lock Object &Size Lås objekt&størrelse Unlock Object &Size Lås opp objekt&størrelse Send to S&crapbook Send til k&laddebok Send to La&yer Send til &lag &Group &Grupèr Un&group &Oppløs gruppen Le&vel Ni&vå Send to &Back Bring til &bakgrunnen Bring to &Front Bring til &forgrunnen &Lower &Senk &Raise He&v &Picture Frame &Bilderamme Pol&ygon Pol&ygon &Outlines &Oversikt &Text Frame &Tekstramme &Bezier Curve &Bezierkurve Conve&rt to Konve&rter til Cu&t K&lipp &Copy &Kopier &Delete &Slett C&lear Contents F&jern innhold Show P&roperties... Vis e&genskaper .... Hide P&roperties... Skjul e&genskaper ... Do you really want to clear all your Text? Ønsker du virkelig å fjerne all din Tekst? PageItem Image Bilde Text Tekst Line Linje Polygon Polygon Polyline Polylinje PathText Tekststi Copy of Kopi av PageItemAttributes None Ingen Relates To Is Parent Of Is Child Of Name Navn Type Type Value Verdi Parameter Parameter &Add &Legg til Alt+A Alt+A &Copy &Kopier Alt+C Alt+C &Delete &Delete Alt+D Alt+D C&lear T&øm Alt+L Alt+L &OK &Greit &Cancel &Avbryt None relationship Ingen Relationship Relationship To Attributes Attributter PageItemAttributesBase Name Navn Type Type Value Verdi Parameter Parameter &Add &Legg til Alt+A Alt+A &Copy K&opier Alt+C Alt+C &Delete &Slett Alt+D Alt+D C&lear T&øm Alt+L Alt+L &OK &Greit &Cancel &Avbryt PageItem_ImageFrame Picture Bilde Preview Settings Forhånsvisning innstillinger Image Bilde PageItem_LatexFrame Error Feil Running the external application failed! Could not create a temporary file to run the application! Information Informasjon Running the application "%1" failed! OK Greit Running The application "%1" failed to start! The application "%1" crashed! Application DPI DPI State Finished Render The config file didn't specify a executable path! Render Frame PageItem_PathText Paragraphs: Avsnitt: Lines: Words: Ord: Chars: Tegn: PageItem_TextFrame Linked Text Lenket tekst Text Frame Tekstramme Paragraphs: Avsnitt: Lines: Words: Ord: Chars: Tegn: PageLayouts Page Layout Side utseende First Page is: Første side er: Document Layout Number of pages to show side-by-side on the canvas Often used for allowing items to be placed across page spreads Location on the canvas where the first page of the document is placed PagePalette Double sided Dobbeltsidig Middle Right I midten mot høyre Normal Normal Arrange Pages Arranger sider Available Master Pages: Document Pages: Dokument sider: List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them. Drag pages or master pages onto the trash to delete them List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages. PageSelector Page Side of %1 av %1 %1 of %2 %1 av %2 %1 of %1 %1 av %1 PageSize Quarto Quarto Foolscap Foolscap Letter Letter Government Letter Government Letter Legal Legal Ledger Ledger Executive Executive Post Post Crown Crown Large Post Large Post Demy Demy Medium Medium Royal Royal Elephant Elephant Double Demy Double Demy Quad Demy Quad Demy STMT STMT A A B B C C D D E E ParaStyleComboBox No Style Ingen stil PathAlongPathPlugin Path Along Path... Path Tools Bends a Polygon along a Polyline This plugin bends a Polygon with the help of a Polyline. PathCutPlugin Cut Polygon Path Tools Cuts a Polygon by a Polyline Qt Version too old This plugin requires at least version 4.3.3 of the Qt library Error Feil The cutting line must cross the polygon and both end points must lie outside of the polygon PathDialogBase Path along Path Effect Type Single Single, stretched Repeated Repeated, stretched Horizontal Offset Vertical Offset Gap between Objects Preview on Canvas Rotate Objects by: 90° 180° 270° PathFinderBase Boolean Path Operations Keep a copy of the original Item after applying the operation keep + = Operation ... Swap Shapes Options Innstillinger Result gets Color of: first Shape second Shape PathFinderDialog Result gets Color of: Intersection gets Color of: PathFinderPlugin Path Operations... Path Tools Path Operations Apply fancy boolean operations to paths. Qt Version too old This plugin requires at least version 4.3.3 of the Qt library PathStrokerPlugin Create Path from Stroke Path Tools Converts the stroke of a Path to a filled Path. PatternDialog Choose a Directory Velg en katalog Loading Patterns All Files (*) Alle filtyper (*) Open Åpne Patterns Load Load Set Remove Fjern Remove All OK Greit Cancel Avbryt &Name: &Navn: Rename Entry All Supported Formats Alle støttede formater Rename Endre navn PicSearch Result Resultat Search Results for: Søk i Resultat etter: Preview Forhåndsvis Select Velg Cancel Avbryt Size: Størrelse: Resolution: Oppløsning: DPI DPI Unknown Ukjent RGB RGB CMYK CMYK Grayscale Gråskala Colorspace: &Preview &Forhåndsvisning Alt+P Alt+P &Select Alt+S Alt+S PicSearchBase Result Resultat Search Results for: Søk i Resultat etter: &Preview &Forhåndsvisning Alt+P Alt+P Alt+S Alt+S PicSearchOptions The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows Cancel Search Start Search Select a base directory for search Scribus - Image Search Scribus - bildesøk The search failed: %1 Søket feilet: %1 Search Images Search for: Søk etter: Start at: Change... Endre ... Searching Case insensitive search Search recursively Base directory for search does not exist. Please choose another one. PicStatus Pictures Bilder Name Navn Path Sti Page Side Print Skriv ut Status Tilstand Goto Gå til Yes Ja OK Greit Missing Mangler Search Søk &OK &Greit Manage Pictures Håndter bilder Scribus - Image Search Scribus - bildesøk The search failed: %1 Søket feilet: %1 No images named "%1" were found. Ingen bilder med navn "%1" ble funnet. Close Lukk Not on a Page JPG TIFF PSD EPS/PS PDF PDF JPG2000 emb. PSD Unknown Ukjent RGB RGB CMYK CMYK Grayscale Gråskala n/a Information Informasjon Path: Search... Name: Navn: Image Bilde DPI: Format: Format: Colorspace: Size Størrelse Pixels: Scale: Skala: Printed: Layout Utseende On Page: Select Velg Image Tools Image Visible Image Effects... Edit Image... Rediger bilde ... Extended Image Properties... Sort by Name Sort by Page Manage Images Go to Name of the image file Location where the image file is stored Search for a missing image Type of the image The colorspace of the image Colorspace used within the image, eg RGB or CMYK Native resolution of the image, in dots per inch Height and width of the image Horizontal and vertical scaling applied to the image Size of the image when printed Page that the image is displayed on Page Item: Name of the page item that contains the image Effective DPI: Effective resolution of the image after scaling Move to the page that the image is on Move to the page that the item is on and select it Enable or disable exporting of the item Export/Print Image Set format specfic properties of certain image types, like clipping paths Edit the image in the default editor Make the image visible or invisible Apply non destructive effects to the image in its frame PixmapExportPlugin Save as &Image... Lagre som b&ilde ... Export As Image Eksporter som bilde Exports selected pages as bitmap images. Save as Image Lagre som bilde Error writing the output file(s). Feil ved skriving av output filen(e). Export successful PluginManager Cannot find plugin plugin manager Kan ikke laste plugin unknown error plugin manager ukjent feil Cannot find symbol (%1) plugin manager Kan ikke finne symbol (%1) Import plugin manager Importer Standard plugin manager Standard Unknown plugin manager Ukjent Plugin: loading %1 plugin manager Plugin: laster %1 init failed plugin load error Start feilet unknown plugin type plugin load error Ukjent plugin type Plugin: %1 loaded plugin manager Plugin: %1 lastet Plugin: %1 failed to load: %2 plugin manager Plugin: %1 mislyktes å starte: %2 SVG Images (*.svg *.svgz);; SVG bilder (*.svg *.svgz);; SVG Images (*.svg);; SVG bilder (*.svg);; OpenOffice.org Draw (*.sxd);; OpenOffice.org Draw (*.sxd);; Plugin: %1 initialized ok plugin manager Plugin: %1 failed post initialization plugin manager There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net. PluginManagerPrefsGui Plugin Manager Pluginbehandler Plugin Plugin How to run Hvordan skal den kjøres Type Type Load it? Start den? Plugin ID Plugin ID File Fil Yes Ja No Nei You need to restart the application to apply the changes. Du må restarte programet for at endringene skal tre i kraft. Form PolygonProps Polygon Properties Polygon egenskaper % % Corn&ers: Hjørn&er: &Rotation: &Rotasjon: &Factor: &Faktor: &OK &Greit &Cancel &Avbryt Number of corners for polygons Antall hjørner for polygoner Degrees of rotation for polygons Antall grader rotasjon for polygoner Sample Polygon Eksempel polygon Apply &Factor Bruk &faktor Apply Convex/Concave Factor to change shape of Polygons Bruk konveks/konkav faktor for å forandre formen på polygoner A negative value will make the polygon concave (or star shaped), a positive value will make it convex En negativ verdi vil gjøre polygonet konkavt (stjerneformet), mens en positiv verdi vil gjøre det konveks PolygonWidget Corn&ers: Hjørn&er: &Rotation: &Rotasjon: Apply &Factor Bruk &faktor % % &Factor: &Faktor: Number of corners for polygons Degrees of rotation for polygons Apply Convex/Concave Factor to change shape of Polygons Sample Polygon Eksempel polygon A negative value will make the polygon concave (or star shaped), a positive value will make it convex En negativ verdi vil gjøre polygonet konkavt (stjerneformet), mens en positiv verdi vil gjøre det konveks A negative value will make the polygon concave (or star shaped), a positive value will make it convex Preferences Preferences Innstillinger General Generelt Document Dokument Guides Guide Typography Typografier Tools Verktøy Scrapbook Kladdebok Display Vis External Tools Eksterne verktøy Misc. Diverse GUI GUI Units Enheter Points (pt) Punkter (pt) Millimetres (mm) Millimeter (mm) Inches (in) Tommer (in) Picas (p) Picas (p) px px Menus Menyer Paths Stier Page Size Sidestørrelse Custom Brukerdefinert Portrait Stående Landscape Liggende Margin Guides Hjelpemarger Autosave Autolagre min minimum Grid Layout Gitter layout Grid Colors Farge på gitter Placing Plassering Baseline Grid Baseline gitter Subscript Senket skrift % % Superscript Hevet skrift Small Caps Små bokstaver Other Andre pt pt Woven silk pyjamas exchanged for blue quartz Woven silk pyjamas exchanged for blue quartz None Ingen Other Options Andre innstillinger Preview Forhåndsvis Small Liten Medium Medium To adjust the display drag the ruler below with the Slider. For å justere visningen trekk linjalen nedenfor med glideren. Postscript Interpreter Postscript behandler Image Processing Tool Bildebehandlingsverktøy Printing Skriver ut Choose the default window decoration and looks. Scribus inherits any available KDE or Qt themes Velg standard vindudekorasjon. Scribus kan bruke alle KDE og Qt temaer Default font size for the menus and windows Standard skriftstørrelse for menyer og vinduer Default unit of measurement for document editing Standard enhet for måling ved dokument redigering Number of lines Scribus will scroll for each move of the mouse wheel Antall linjer Scribus vil scrolle for hver bevegelse med musehjulet Radius of the area where Scribus will allow you to grab an objects handles Radius for område der Scribus vil la deg fange handles for et objekt Number of recently edited documents to show in the File menu Antall nylig brukte filer som vises i filmenyen Default documents directory Standard dokument katalog Default ICC profiles directory Standard ICC profil katalog Default Scripter scripts directory Standard Scripter skript katalog Default page size, either a standard size or a custom size Standard dokument sidestørrelse, enten en standard størrelse eller en brukerdefinert størrelse Default orientation of document pages Standard retning for dokumentets sider Width of document pages, editable if you have chosen a custom page size Bredde av dokumentets sider, kun redigerbar hvis du har valgt en brukerdefinert sidestørrelse Height of document pages, editable if you have chosen a custom page size Høyde av dokumentets sider, kun redigerbar hvis du har valgt en brukerdefinert sidestørrelse Enable single or spread based layout Aktiver singel eller spredt basert layout Make the first page the left page of a document Gjør første side til venstre side av dokumentet Distance between the top margin guide and the edge of the page Avstanden mellom topp hjelpemargen og sidens kant Distance between the bottom margin guide and the edge of the page Avstand mellom bunn hjelpemargen og sidens kant Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Avstand mellom venstre hjelpemarg og sidens kant. Hvis Motstående Sider er markert kan denne brukes til å få til den korrekte marg for binding Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding Avstand mellom høyre hjelpemarg og sidens kant. Hvis Motstående Sider er markert kan denne brukes til å få til den korrekte marg for binding When enabled, Scribus saves a backup copy of your file with the .bak extension each time the time period elapses Hvis slått på, så lager Scribus en kopi av din fil med navnet *.bak hver gang tidsperioden utløper Time period between saving automatically Tidsperiode mellom automatisk lagring Distance between the minor grid lines Avstand mellom gitter linjer Distance between the major grid lines Avstand mellom hoved-gitterlinjer Distance within which an object will snap to your placed guides Maksimum avstand for når et objekt vil legge seg på plasseringsguidene Color of the minor grid lines Farge for gitterlinjer Color of the major grid lines Farge for hoved-gitterlinjer Color of the guide lines you insert Farge på hjelpelinjer du innsetter Place the grid behind your page objects Legg gitter bak dine sideobjekter Place the grid in front of your page objects Legg gitter foran dine sideobjekter Turns on the basegrid Vis Baseline gitter Turns off the basegrid Skjul Baseline gitter Displacement above the baseline of the font on a line Forskyvning over bunnlinjen for en skrifttype på en linje Relative size of the superscript compared to the normal font Relativ størrelse av hevet skrift i forhold til normal skrifttype Displacement below the baseline of the normal font on a line Forskyvning under bunnlinjen for en skrifttype på en linje Relative size of the subscript compared to the normal font Relativ størrelse av senket skrift i forhold til normal skrifttype Relative size of the small caps font compared to the normal font Relativ størrelse av små bokstaver i forhold til normal skrifttype Percentage increase over the font size for the line spacing Relativ størrelse i prosent av linjeavstand i forhold til normal skrifttype Text Frame Properties Tekstfelt egenskaper Picture Frame Properties Billedramme egenskaper Shape Drawing Properties Form tegningegenskaper Magnification Level Defaults Standard forstørrelsesnivå Line Drawing Properties Linje tegningegenskaper Polygon Drawing Properties Polygon tegneegenskaper Font for new text frames Skrifttype som skal brukes i nye tekstrammer Size of font for new text frames Størrelse for skrifttype for nye tekstrammer Color of font Skriftfarge Number of columns in a text frame Antall kolonner i en tekstramme Gap between text frame columns Mellomrom mellom kolonner i tekstramme Sample of your font Eksempel på skrifttypen din Picture frames allow pictures to scale to any size Bilderamme tillater bilder å skalere til enhver størrelse Horizontal scaling of images Horisontal skalering av bilder Vertical scaling of images Vertikal skalering av bilder Keep horizontal and vertical scaling the same Samme horisontal og vertikal skalering Pictures in picture frames are scaled to the size of the frame Bilder i bilderammer er skalert opp til rammens størrelse Automatically scaled pictures keep their original proportions Automatisk skalerte bilder beholder deres originale proporsjoner Fill color of picture frames Fyll farge på bilderammer Saturation of color of fill Fyllfargens styrke Line color of shapes Formers linjefarge Saturation of color of lines Linjefarges styrke Fill color of shapes Formers fyllfarge Line style of shapes Formenes linjestil Line width of shapes Formenes linjebredde Minimum magnification allowed Minimum tillat forstørrelse Maximum magnification allowed Maksimum tillat forstørrelse Change in magnification for each zoom operation Forandring i forstørrelse for hvert enkelt zoom Color of lines Linjefarge Saturation of color Fargestyrke Style of lines Linjestil Width of lines Linjetykkelse Number of corners for polygons Antall hjørner for polygoner Degrees of rotation for polygons Antall grader for rotasjon av polygoner Sample Polygon Eksempel polygon Choose the size of the preview in the scrapbook palette Velg størrelse på forhåndsvisning i kladdebok paletten Save the scrapbook contents everytime after a change Lagre kladdebokinnhold etter hver forandring When using facing pages, show the two pages side by side Ved bruk av motstående sider, vis sidene ved siden av hverandre Color for paper Papirfarge Color for the margin lines Marginlinjefarge Mask the area outside the margins in the margin color Legg området utenfor margene i margenfargen Enable transparency features within PDF 1.4 export Slå på gjennomsiktighetsfunksjoner innenfor PDF 1.4 eksportering Set the default zoom level Sett standard zoom nivå Filesystem location for the Ghostscript interpreter Ghostscript behandlerens posisjon i filsystemet Antialias text for EPS and PDF onscreen rendering Antialias tekst for EPS og PDF skjermrendering Antialias graphics for EPS and PDF onscreen rendering Antialias bilder for EPS og PDF skjermrendering Filesystem location for graphics editor Bildebehandlerens posisjon i filsystemet Do not show objects outside the margins on the printed page or exported file Ikke vis objekter utenfor margene på utskrift eller eksportert fil Choose a Directory Velg en katalog mm mm in in p p &Theme: &Tema: &Font Size: &Skriftstørrelse: Mouse Settings Mus innstillinger &Wheel Jump: &Hjulhopp: &Grab Radius: &Hent radius: &Recent Documents: &Nylig åpnede dokumenter: &Documents: &Dokumenter: &Change... &Forandre ... &ICC Profiles: &ICC profiler: C&hange... &Forandre ... &Scripts: &Skript: Ch&ange... Fo&randre ... &Size: &Størrelse: Orie&ntation: Ret&ning: &Width: &Bredde: &Height: &Høyde: &Facing Pages &Motstående sider Left &Page First Venstre &side først &Bottom: B&unn: &Top: &Topp: &Right: &Høyre: &Left: &Venstre: &Enabled &Aktivert &Interval: &Intervall: M&inor Grid Spacing: M&indre gitter avstand: Ma&jor Grid Spacing: St&ørre gitter avstand: Guide &Snap Distance: Gitter &snap avstand: Min&or Grid Color: M&indre gitterfarge: Majo&r Grid Color: St&ørre gitterfarge: &User Guides Color: Br&uk gitterfarge: Base&line Grid Color: Bruk Baes&line gitterfarge: In the &Background I &bakgrunnen In the Fore&ground I &forgrunnen O&n &På O&ff &Av &Displacement: &Forskyvning: &Scaling: &Skalering: D&isplacement: F&orskyvning: S&caling: S&kalering: Sc&aling: Sk&alering: Baseline &Grid: Grunnlinje &Nett: Automatic &Line Spacing: Automatisk linjeav&stand: Default &Font: Standard &skrifttype: Default &Size: Standard &størrelse: &Text Color: &Tekstfarge: Colu&mns: Kolo&nner: &Gap: &Mellomrom: &Line Color: &Linjefarge: &Shading: &Skygge: &Fill Color: &Fyllfarge: S&hading: &Skygge: &Type of Line: Li&njetype: Line &Width: Linje&bredde: Mi&nimum: Mi&nimum: Ma&ximum: Ma&ksimum: &Stepping: &Skritt: &Free Scaling &Fri skalering &Horizontal Scaling: &Horisontal skalering: &Vertical Scaling: &Vertikal skalering: &Scale Picture to Frame Size &Skaler bilde til rammestørrelse Keep Aspect &Ratio Behold høyde/bredde fo&rhold F&ill Color: &Fyllfarge: Corn&ers: Hjørn&er: &Rotation: &Rotasjon: &Factor: &Faktor: Sa&ve Contents on Changes La&gre innhold når noe forandres Large Stor Display Pages &Side by Side Vis &sider ved siden av hverandre Page Colors Sidefarger &Background: &Bakgrunn: &Margins: &Marger: Display &Unprintable Area in Margin Color Vis &ikke utskrivbare områder i samme farge som margene Use PDF 1.4 &Transparency Features Bruk funksjonen for gjennomsiktighet som finnes i pdf 1.4 &Adjust Display Size &Juster visningsstørrelsen &Name of Executable: &Navn på kjørbar fil: Antialias &Text Anti-alias &tekst Antialias &Graphics Anti-alias &grafikk Name of &Executable: &Navn på kjørbar fil: Clip to Page &Margins &Fest til sidemargene &OK &Greit &Cancel &Avbryt &Inside: &Innside: O&utside: &Utside: Apply &Under Color Removal Bruk under farge fje&rnelse T&emplates: M&aler: Cha&nge... E&ndre ... Baseline &Offset: Grunnlinje &forskyvning: Apply &Factor Bruk &faktor Additional Directory for Document Templates Flere kataloger for dokumentmaler Apply Convex/Concave Factor to change shape of Polygons Bruk konveks/konkav faktoren for å endre formen på polygonet A negative value will make the polygon concave (or star shaped), a positive value will make it convex En negativ verdi vil gjøre polygonet konkavt (stjerneformet), mens en positiv verdi vil gjøre det konveks A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. En måte å skru av noen av de gråskygger som er laget av cyan, gult og magenta rød ved å bruke svart istedenfor. UCR virker best på deler av bilder som er nøytrale og/eller mørke toner som ligger nært opptil grått. Bruk dette for å få utsftening enkelteoen bilder til å se bedre; og noe eksperimentering og testing er nødvendig neste gang. UCR reduserer muligheten for overmettning med CMY farger. Executive Executive Folio Folio Legal Legal Letter Letter Tabloid Tabloid &Language: &Språk: Units: Enhetr: Hyphenator Fonts Skrifttyper Preflight Verifier Color Management PDF Export PDF Eksport Document Item Attributes Table of Contents and Indexes Keyboard Shortcuts Tastatur snarveier Color: Farge: Alt+U Alt+U Show Pictures Vis bilder Show Text Chains Vis tekstlenker Show Frames Vis rammer dpi dpi Resolution: Oppløsning: Miscellaneous Diverse Type Type File Fil Yes Ja No Nei Plugins Plugins Rulers relative to Page Linjaler relativ i forhold til siden Horizontal: Horisontal: Vertical: Vertikal: Printer Skriver PrefsDialogBase &OK &Greit &Cancel &Avbryt &Defaults &Standard Save... Lagre ... Save Preferences Lagre innstillinger Export... &Apply &Bruk All preferences can be reset here Apply all changes without closing the dialog Export current preferences into file PrefsManager Postscript Postscript PDF 1.3 PDF 1.3 PDF 1.4 PDF 1.4 PDF/X-3 PDF/X-3 Migrate Old Scribus Settings? Overfør instillinger fra tidligere Scribus versjoner? Scribus has detected existing Scribus 1.2 preferences files. Do you want to migrate them to the new Scribus version? Single Page Enkel side Left Page Venstre side Right Page Høyre side Middle I midten Middle Left I midten til venstre Middle Right Høyre mot høyre PostScript PostScript Could not open preferences file "%1" for writing: %2 Writing to preferences file "%1" failed: QIODevice status code %2 Failed to open prefs file "%1": %2 Failed to read prefs XML from "%1": %2 at line %3, col %4 Error Writing Preferences Scribus was not able to save its preferences:<br>%1<br>Please check file and directory permissions and available disk space. scribus app error Error Loading Preferences Scribus was not able to load its preferences:<br>%1<br>Default settings will be loaded. PDF 1.5 PDF 1.5 PresetLayout None Ingen Magazine Magasine Guttenberg Guttenberg Fibonacci Fibonacci Golden Mean Nine Parts Gutenberg Gutenberg None layout type Ingen When you have selected a Document Layout other than Single Page, you can select a predefined page layout here. 'None' leaves margins as is, Gutenberg sets margins classically. 'Magazine' sets all margins to the same value. Leading is Left/Inside value. PrintDialog Setup Printer Skriverinnstillinger File Fil Options Innstillinger All Alle Cyan Cyan Magenta Magenta Yellow Gult Black Svart Save as Lagre som Postscript-Files (*.ps);;All Files (*) Postscript-filer (*.ps);; Alle filtyper (*) Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Skriv inn en kommaseparert liste med tegn hvor tegnet * representerer alle sider, og 1-5 representerer en rekke sider, eller en enkelt side. Print Destination Valg av skriver &Options... &Valg ... &File: &Fil: C&hange... Fo&randre ... A&lternative Printer Command A&lternativ utskriftskommando Co&mmand: Ko&mmando: Range Område Print &All Skriv ut &alt Print Current Pa&ge Skriv ut gjeldende &side Print &Range Utsk&riftsområde N&umber of Copies: A&ntall kopier: Print &Normal Skriv ut &Normal Print &Separations Utskrift &Seperasjoner Pr&int In Color If Available Skri&v ut i farger hvis tilgjengelig Print In Gra&yscale Skriv ut i grå&farger Ad&vanced Options... F&lere valg ... &Print &Skriv ut &Cancel &Avbryt Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options Bruk en alternativ utskriftsbehandler, som kprinter eller gtklp, for å bruke flere utskriftsopsjoner Postscript Files (*.ps);;All Files (*) Postscript filer (*.ps);;Alle filer (*) Print Normal PostScript Level 1 PostScript nivå 1 PostScript Level 2 PostScript nivå 2 PostScript Level 3 PostScript nivå 3 Page Side Mirror Page(s) Horizontal Speilvend siden(e) horisontalt Mirror Page(s) Vertical Speilvend siden(e) vertikalt Color Farge Advanced Options Flere valg Preview... Forhåndsvis ... A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks. En måte å skru av noen av de gråskygger som er laget av cyan, gult og magenta rød ved å bruke svart istedenfor. UCR virker best på deler av bilder som er nøytrale og/eller mørke toner som ligger nært opptil grått. Bruk dette for å få utsftening enkelteoen bilder til å se bedre; og noe eksperimentering og testing er nødvendig neste gang. UCR reduserer muligheten for overmettning med CMY farger. PostScript Files (*.ps);;All Files (*) PostScript filer (*.ps);;Alle filer (*) Do not show objects outside the margins on the printed page or exported file Ikke vis objekter utenfor margene på utskrift eller eksportert fil Failed to retrieve printer settings Right: Høyre: Inside: Outside: Distance for bleed from the top of the physical page Avstand for bleed fra toppen av den fysiske siden Distance for bleed from the bottom of the physical page Avstand for bleed fra bunnen av den fysiske siden Distance for bleed from the left of the physical page Avstand for bleed fra venstresiden av den fysiske siden Distance for bleed from the right of the physical page Avstand for bleed fra høyresiden av den fysiske siden PrintDialogBase Setup Printer Skriverinnstillinger Print Destination Valg av skriver &Options... &Valg ... &File: &Fil: C&hange... Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options A&lternative Printer Command A&lternativ utskriftskommando Co&mmand: Ko&mmando: Range Område Print &All Skriv ut &alt N&umber of Copies: A&ntall kopier: Print Current Pa&ge Skriv ut gjeldende &side Print &Range Utsk&riftsområde Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number. Options Innstillinger Print Normal Print Separations Print in Color if Available Print in Grayscale Sets the PostScript Level. Setting to Level 1 or 2 can create huge files Advanced Options Flere valg Page Side Mirror Page(s) Horizontal Speilvend siden(e) horisontalt Mirror Page(s) Vertical Speilvend siden(e) vertikalt This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer. Set Media Size Clip to Page Margins Color Farge A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks. Apply Under Color Removal Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled. Convert Spot Colors to Process Colors Allows you to embed color profiles in the print stream when color management is enabled Apply Color Profiles Marks This creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing Crop Marks Add registration marks which are added to each separation Registration Marks This creates bleed marks which are indicated by _ . _ and show the bleed limit Bleed Marks Add color calibration bars Color Bars Offset: Indicate the distance offset for the registration marks Bleeds Top: Distance for bleed from the top of the physical page Avstand for bleed fra toppen av den fysiske siden Left: Distance for bleed from the right of the physical page Avstand for bleed fra høyresiden av den fysiske siden Bottom: Distance for bleed from the bottom of the physical page Avstand for bleed fra bunnen av den fysiske siden Right: Høyre: Distance for bleed from the left of the physical page Avstand for bleed fra venstresiden av den fysiske siden Use the existing bleed settings from the document preferences Use Document Bleeds Preview... Forhåndsvis ... &Print &Skriv ut Cancel Avbryt Include PDF Annotations and Links into the output. Note: PDF Forms will not be exported. Include PDF Annotations and Links PropertiesPalette Properties Egenskaper Name Navn Geometry Geometri pt pt Basepoint: Basepoint: Level Nivå Shape: Form: Distance of Text Avstand til tekst Path Text Properties Tekststi egenskaper Show Curve Vis kurve Start Offset: Start forskyvning: Distance from Curve: Avstand fra kurve: % % Shade: Skygge: Custom Spacing Brukerdefinert avstand Input Profile: Input profil: Rendering Intent: Rendering Intent: Perceptual Perceptual Relative Colorimetric Relative Colorimetric Saturation Metning Absolute Colorimetric Absolutt Colorimetric Left Point Venstre punkt End Points Endepunkter Miter Join Mitter sammenføyning Bevel Join Bevel sammenføyning Round Join Rund sammenføyning Flat Cap Flat Cap Square Cap Firkant Cap Round Cap Rund Cap No Style Ingen stil Cell Lines Cellelinjer Line at Top Linje ved topp Line at the Left Linje til venstre Line at the Right Linje til høyre Line at Bottom Linje ved bunnen Name of selected object Det valgte objektets navn Horizontal position of current basepoint Horisontal posisjon av nåværende basepoint Vertical position of current basepoint Vertikal posisjon av nåværende basepoint Width Bredde Height Høyde Rotation of object at current basepoint Rotasjon av objekt ved nåværende basepoint Point from which measurements or rotation angles are referenced Punkt hvorfra målinger eller rotasjonsvinkler er regnet ut Select top left for basepoint Velg venstre på toppen som basepoint Select top right for basepoint Velg høyre på toppen som basepoint Select bottom left for basepoint Velg venstre på bunnen som basepoint Select bottom right for basepoint Velg høyre på bunnen som basepoint Select center for basepoint Velg senter som basepoint Flip Horizontal Speil horisontalt Flip Vertical Speil vertikalt Move one level up Flytt et nivå opp Move one level down Flytt et nivå ned Move to front Plasser fremst Move to back Plasser bakerst Indicates the level the object is on, 0 means the object is at the bottom Indikerer nivået objektet er på, 0 betyr at objektet er på bunnen Lock or unlock the object Lås objektet eller fjern låsing Lock or unlock the size of the object Lås eller fjern låsing av objektets størrelse Enable or disable printing of the object Aktiver eller deaktiver utskriving av objektet Make text in lower frames flow around the object shape Få tekst i lavere rammer til å flyte rundt objektets form Font of selected text or object Skrifttype til den valgte tekst eller objekt Font Size Skriftstørrelse Scaling width of characters Skallering bredde av tegn Color of text stroke Tekststrekfarge Color of text fill Tekstfyllfarge Saturation of color of text stroke Metning av tekststrekens farge Saturation of color of text fill Metning av tekstfyllets farge Manual Kerning Manuell Kerning Line Spacing Linjeavstand Style of current paragraph Stil til gjeldende avsnitt Change settings for left or end points Endre innstillinger for venstre eller endepunkter Pattern of line Linjemønster Thickness of line Linjetykkelse Type of line joins Form for linjesammenføyninger Type of line end Form for linjeavslutninger Line style of current object linjestil for gjeldende objekt Choose the shape of frame... Velg rammens form ... Edit shape of the frame... Endre rammens form ... Set radius of corner rounding Sett radius på hjørneavrunding Number of columns in text frame Antall kolonner i tekstrammen Switches between Gap or Column width Skifter mellom mellomrom og kolonnebredde Distance between columns Avstand mellom koloner Distance of text from top of frame Avstand av tekst til rammens topp Distance of text from bottom of frame Avstand av tekst til rammens bunn Distance of text from left of frame Avstand av tekst til rammens venstreside Distance of text from right of frame Avstand av teksten til rammens høyreside Edit tab settings of text frame... Rediger tab innstillinger av tekst rammen ... Allow the image to be a different size to the frame Tillat bildet å være en annen størrelse i forhold til rammen Horizontal offset of image within frame Horisontal forskyving av bildet innenfor rammen Vertical offset of image within frame Vertikal forskyving av bildet innenfor rammen Resize the image horizontally Skaler bildet horisontalt Resize the image vertically Skaler bilder vertikalt Keep the X and Y scaling the same Behold X og Y skaleringen Keep the aspect ratio Behold høyde/bredde forhold Make the image fit within the size of the frame Få bildet til å passe innenfor rammens størrelse Use image proportions rather than those of the frame Bruk bilde proporsjoner istedenfor rammens Source profile of the image Kildeprofil til bildet Rendering intent for the image Rendering intent for bildet mm mm in in p p Column width Kolonnebredde None Ingen Warning Advarsel Name "%1" isn't unique. Please choose another. Navnet "%1" er ikke entydig. Vennligst velg et annet navn. OK Greit X, Y, &Z X, Y, &Z &Shape &Form &Text &Tekst &Image &Bilde &Line &Linje &Colors &Farger &X-Pos: &X-Pos: &Y-Pos: &Y-Pos: &Width: &Bredde: &Height: &Høyde: &Rotation: &Rotasjon: &Edit Shape... &Rediger form ... R&ound Corners: R&unde hjørner: Colu&mns: Kolo&nner: &Gap: &Mellomrom: To&p: To&pp: &Bottom: &Bunn: &Left: &Venstre: &Right: &Høyre: T&abulators... &Tabulatorer ... Text &Flows Around Frame Tekst &flyter rundt ramme Use &Bounding Box &Bruk Bounding boks &Use Contour Line Br&uk kontur linjer &Font Size: &Skriftstørrelse: &Kerning: &Kerning: L&ine Spacing: Linjeav&stand: St&yle: St&il: Lan&guage: Sp&råk: &Free Scaling &Fri Skalering X-Sc&ale: X-sk&ala: Y-Scal&e: Y-ska&la: Scale &To Frame Size Skaler &til rammestørrelse P&roportional P&roporsjonal &Basepoint: &Basepoint: T&ype of Line: Li&njetype: Line &Width: Linje &bredde: Ed&ges: Ka&nter: &Endings: &Endelser: &X1: &X1: X&2: X&2: Y&1: Y&1: &Y2: &Y2: Use a surrounding box instead of the frame's shape for text flow Bruk en omkringliggende boks fremfor rammens form for tekstflyt Use a second line originally based on the frame's shape for text flow Bruk en annen linje opprinnelig basert på rammens form for tekstflyten Hyphenation language of frame Orddelingsspråk for rammen Right to Left Writing Høyre mot venstre skriving Fixed Linespacing Automatic Linespacing Align to Baseline Grid &OK &Greit Actual X-DPI: Faktisk X-DPI: Actual Y-DPI: Faktisk Y-DPI: Start Arrow: End Arrow: Offset to baseline of characters Scaling height of characters Manual Tracking Name "%1" isn't unique.<br/>Please choose another. Navnet "%1" er ikke unikt. <br/>Velg et annet. Fill Rule Even-Odd Non Zero Overprinting Knockout Overprint Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color. Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color. Gap: Width: Bredde: Text &Flow Around Frame Disabled Ikke i bruk Use Frame &Shape Image Effects Bildeeffekter Extended Image Properties Disable text flow from lower frames around object Use the frame shape for text flow of text frames below the object. Use the bounding box, which is always rectangular, instead of the frame's shape for text flow of text frames below the object. Transparency Settings &Group &Grupèr Opacity: Blend Mode: Normal Normal Darken Lighten Multiply Screen Skjerm Overlay Hard Light Soft Light Difference Forskjell Exclusion Color Dodge Color Burn Hue Color Farge Group the selected objects Auto Auto When chosen, the contour line can be edited with the Edit Shape Tool on the palette further above. When edited via the shape palette, this becomes a second separate line originally based on the frame's shape for text flow of text frames below the object. T Default Stair Step Skew Flip Text Type: Type: Use Image Clip Path Paragraph St&yle: Character St&yle: Optical Margins: Word Tracking Min: Norm: Glyph Extension Max: Use the clipping path of the image Paragraph style of currently selected text or paragraph Character style of currently selected text or paragraph Remove Direct Paragraph Formatting Remove Direct Character Formatting Minimal width of spaces between words Normal width of spaces between words Minimal shrinkage of glyphs for justification Maximal extension of glyphs for justification Uses hanging punctuation and margin kerning to achieve nicer looking columns Enable or disable exporting of the object Custom Brukerdefinert &Edit... &Rediger ... First Line Offset Maximum Ascent Font Ascent Color & Effects Advanced Settings Style Settings Stil innstillinger Baseline Ungroup the selected group Select the line spacing mode. Set the height of the first line of the text frame to use the tallest height of the included characters Set the height of the first line of text frame to use the full ascent of the font(s) in use Set the height of the first line of the text frame to the specified line height PythonConsole &Open... &Åpne ... &Save &Lagre &Save As... La&gre som ... &Exit &Avslutt &File &Fil &Run &Kjør &Save Output... &Script S&kript Script Console Skript konsoll Write your commands here. A selection is processed as script Output of your script Python Scripts (*.py) Python script (*.py) Save the Python Commands in File Warning Advarsel Text Files (*.txt) Tekstfiler (*.txt) Save Current Output Save &As... Lagre &som ... Run As &Console Scribus Python Console Open Python Script File Python Scripts (*.py *.PY) Col: %1 Row: %2/%3 Ctrl+O Ctrl+S &Quit This is a standard Python console with some known limitations. Please consult the Scribus Scripter documentation for futher information. QColorDialog Hu&e: Hu&e: &Sat: &Sat: &Val: &Val: &Red: &Rød: &Green: &Grønn: Bl&ue: Bl&å: A&lpha channel: A&lfa kanal: &Basic colors &Basis farge &Custom colors B&rukerdefinerte farger &Define Custom Colors >> &Definer egne farger >> OK Greit Cancel Avbryt &Add to Custom Colors &Legg til egne farger Select color Velg farge QFileDialog Copy or Move a File Kopier eller flytt en fil Read: %1 Les: %1 Write: %1 Skriv: %1 File &name: Fil&navn: File &type: Fil&type: One directory up En katalog opp Cancel Avbryt All Files (*) Alle filtyper (*) Name Navn Size Størrelse Type Type Date Dato Attributes Attributter OK Greit Look &in: Søk &i: Back Tilbake Create New Folder Lag ny katalog List View Listevisning Detail View Detaljert visning Preview File Info Forhåndsvis info i fil Preview File Contents Forhåndsvis innhold i fil Read-write Lese og skrive Read-only Skrivebeskyttet Write-only Bare skrive Inaccessible Ikke tilgjengelig Symlink to File Symlink til fil Symlink to Directory Symlink til katalog Symlink to Special Symlink til spesiell File Fil Dir Katalog Special Spesiell Open Åpne Save As Lagre som &Open &Åpne &Save &Lagre &Rename &Endre navn &Delete S&lett R&eload &Oppdater Sort by &Name Sorter etter &navn Sort by &Size Sorter etter &størrelse Sort by &Date Sorter etter &dato &Unsorted &Ikke sortert Sort Sorter Show &hidden files Vis s&kjulte filer the file filen the directory katalogen the symlink symlinken Delete %1 Slett %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> <qt>Er du sikker på at du vil slette %1 "%2"?</qt> &Yes &Ja &No &Nei New Folder 1 Ny katalog 1 New Folder Ny katalog New Folder %1 Ny katalog %1 Find Directory Finn katalogen Directories Kataloger Save Lagre Error Feil %1 File not found. Check path and filename. %1 Filen ble ikke funnet. Sjekk sti og filnavn. All Files (*.*) Alle filtyper (*.*) Select a Directory Velg en katalog Directory: Katalog: QFontDialog &Font &Skrifttype Font st&yle Skriftst&il &Size &Størrelse Effects Effekter Stri&keout Gjennomstre&k &Underline &Understrek &Color &Farge Sample Prøve Scr&ipt Skr&ipt OK Greit Apply Bruk Cancel Avbryt Close Lukk Select Font Velg skrifttype QLineEdit Clear Tøm Select All Marker alt &Undo &Angre &Redo &Pånytt Cu&t &Klipp ut &Copy K&opier &Paste &Lim inn QMainWindow Line up Still opp Customize... Brukerdefinert ... QMessageBox <h3>About Qt</h3><p>This program uses Qt version %1.</p><p>Qt is a C++ toolkit for multiplatform GUI &amp; application development.</p><p>Qt provides single-source portability across MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, and all major commercial Unix variants.<br>Qt is also available for embedded devices.</p><p>Qt is a Trolltech product. See <tt>http://www.trolltech.com/qt/</tt> for more information.</p> <h3>Om Qt</h3><p>Dette programet bruker Qt versjon %1.</p><p>Qt er et C++ toolkit for multiplattform GUI &amp; program utvikling</p><p>Qt gir single-source portabilitet mellom MS&nbsp;Windows, Mac&nbsp;OS&nbsp;X, Linux, og alle større kommersielle Unix varianter.<br>Qt er også tilgjengelig for embedded deviced.</p><p>Qt er et Trolltech produkt. Se <tt>http://www.trolltech.com/qt/</tt> for mere informasjon.</p> QObject Initializing... Starter opp ... Document Dokument Background Bakgrunn Warning Advarsel Do you really want to overwrite the File: %1 ? Ønsker du virkelig å overskrive filen: %1 ? &Fonts Preview Forhåndsvisning av &skrifttyper &Insert Special Sett &inn spesielt New &from Template... Ny &fra mal ... Newsletters Nyhetsbrev Brochures Brosjyrer Catalogs Kataloger Flyers Løpesedler Signs Tegn Cards Kort Letterheads Brevhoder Envelopes Konvolutter Business Cards Visittkort Calendars Kalendere Advertisements Annonser Labels Merkelapper Menus Menyer Programs Programmer PDF Forms PDF skjemaer PDF Presentations PDF presentasjoner Magazines Magasiner Posters Plakater Announcements Beskjeder Text Documents Tekst dokumenter Folds Folder Own Templates Egne maler Save as &Image... Lagre som b&ilde ... Save as Image Lagre som bilde Error writting the output file(s). Feil ved skriving av output filen(e). Error writing the output file(s). Feil ved skriving av output filen(e). Export successful. Eksportering gjennomført uten problemer. File exists. Overwrite? Filen eksisterer. Erstatt? exists already. Overwrite? finnes allerede. Erstatt? No Nei Yes Ja Yes all Ja til alle Print Previe&w Forhåndsvisning av &utskrift Import &EPS/PS... Importer &EPS/PS ... All Supported Formats (*.eps *.EPS *.ps *.PS);; Alle støttede formater (*.eps *.EPS *.ps *.PS);; All Files (*) Alle filtyper (*) Open Åpne Save as &Template... Lagre som &mal ... S&cripter Manual... S&kripting håndbok ... &Scribus Scripts &Scribus Skripts &Execute Script... &Utfør Script ... &Recent Scripts Nylig b&rukte skript Show &Console Vis &konsoll S&cript S&kript Online Reference Online referanse Python Scripts (*.py);; All Files (*) Python skript (*.py);; Alle filtyper (*) Save Page as &SVG... Lagre som &SVG ... Save as Lagre som SVG-Images (*.svg *.svgz);;All Files (*) SVG-Bilder (*.svg ·svgz);;Alle filtyper (*) SVG-Images (*.svg);;All Files (*) SVG-Bilder (*.svg);; Alle filtyper (*) Import &SVG... Importer &SVG ... Print Preview Forhåndsvisning av utskrift Importing text Importerer tekst All Supported Formats Alle støttede formater HTML Files HTML filer html html Text Files Tekst filer Font %1 is broken, discarding it Skrifttype %1 er ødelagt, forkaster den Template: Mal: Media Cases Comma Separated Value Files Komma separert fil CSV_data CSV_data CSV_header CSV_header External Links Eksterne lenker Text Filters Tekstfiltre Albanian Albansk Basque Baskisk Bulgarian Bulgarsk Brazilian Brasilsk Catalan Katalansk Chinese Kinesisk Czech Tsjekkisk Danish Dansk Dutch Nederlandsk English Engelsk English (British) Engelsk (Britisk) Esperanto Esperanto German Tysk Finnish Finsk French Fransk Galician Greek Gresk Hungarian Ungarsk Indonesian Indonesisk Italian Italiensk Korean Koreansk Lithuanian Litauisk Norwegian (Bokmaal) Norsk (Bokmål) Norwegian (Nnyorsk) Norsk (Nynorsk) Norwegian Norsk Polish Polsk Russian Russisk Swedish Svensk Spanish Spansk Spanish (Latin) Spansk (Latin) Slovak Slovakisk Slovenian Slovensk Serbian Serbisk &About Script... &Om skript ... About Script Om skript Failed to open document python error Klarte ikke å åpne dokument Failed to save document python error Klarte ikke å lagre dokumentet Unit out of range. Use one of the scribus.UNIT_* constants. python error Target is not an image frame. python error Font not found python error Fant ikke skrifttypen Can't have an empty layer name python error Kan ikke ha et lag uten navn Layer not found python error Fant ikke laget Can't remove the last layer python error Klarte ikke å fjerne det siste laget Can't create layer without a name python error Kan ikke lage et lag uten navn Object not found python error Objektet ble ikke funnet Style not found python error Stilen ble ikke funnet Failed to save EPS python error Klarte ikke å lagre til EPS Corner radius must be a positive number. python error Hjørneradius må være et positivt tall. Line style not found python error Fant ikke linjestilen Cannot get font size of non-text frame. python error Cannot get font of non-text frame. python error Cannot get text size of non-text frame. python error Cannot get column count of non-text frame. python error Cannot get line space of non-text frame. python error Cannot get column gap of non-text frame. python error Cannot get text of non-text frame. python error Cannot set text of non-text frame. python error Cannot insert text into non-text frame. python error Kan ikke sette inn tekst i en ikke-tekstramme Alignment out of range. Use one of the scribus.ALIGN* constants. python error Can't set font size on a non-text frame python error Kan ikke sette størrelsen på skrifttypen på en ikke-tekstramme Can't set font on a non-text frame python error Kan ikke sette skrifttypenavnet på en ikke-tekstramme Column count out of bounds, must be > 1 python error Spaltenummerering ute av system, må være > 1 Can't number of columns on a non-text frame python error Kan kun nummerer spalter i tekstrammer Selection index out of bounds python error Can't select text in a non-text frame python error Kan ikke velge tekst i en ikke-tekstramme Can't delete text from a non-text frame python error Kan ikke slette tekst fra en ikke-tekstramme Can't set text fill on a non-text frame python error Kan ikke bruke tekstfyll på en ikke-tekstramme Can't set text stroke on a non-text frame python error Kan ikke bruke tekststrek på en ikke-tekstramme Can't set text shade on a non-text frame python error Kan ikke bruke tekstskygge på en ikke-tekstramme Can only link text frames python error Kan kun blinke sammen tekstrammer Target frame must be empty python error Målrammen må være tom Target frame links to another frame python error Målrammen er allerede lenket sammen med en annen ramme Target frame is linked to by another frame python error Målrammen er allerede lenket sammen med en annen ramme Source and target are the same object python error Kilden og målet er det samme objektet Can't unlink a non-text frame python error Kan ikke fjerne lenken til en ikke-tekstramme Object is not a linked text frame, can't unlink. python error Objektet er ikke en lenket tekstramme, kan derfor ikke fjerne noen lenke. Object the last frame in a series, can't unlink. Unlink the previous frame instead. python error Objektet er det siste i en serie, kan ikke fjerne lenken. Fjern lenken til den forrige rammen istedenfor. Can't convert a non-text frame to outlines python error Kan ikke konvertere en ikke-tekst ramme til outlines Cannot get a color with an empty name. python error Kan ikke hente en farge uten navn. Color not found python error Fargen ble ikke funnet Cannot change a color with an empty name. python error Kan ikke forandre en farge uten navn. Color not found in document python error Fargen ble ikke funnet i filen Color not found in default colors python error Fargen ble ikke funnet blant standard fargene Cannot create a color with an empty name. python error Kan ikke lage en farge med tomt navn. Cannot delete a color with an empty name. python error Kan ikke slette en farge med tomt navn. Cannot replace a color with an empty name. python error Kan ikke bytte ut en farge med tomt navn. Color not found - python error python error Custom (optional) configuration: short words plugin Standard configuration: short words plugin Short Words processing. Wait please... short words plugin Short Words processing. Done. short words plugin OpenOffice.org Draw (*.sxd);;All Files (*) OpenOffice.org Draw (*.sxd);;Alle filer (*) OpenOffice.org Writer Documents OpenOffice.org Writer dokumenter Afrikaans Afrikaans Turkish Tyrkisk Ukranian Ukrainsk Welsh The filename must be a string. python error Cannot delete image type settings. python error The image type must be a string.