Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 10152 → Rev 10153

/branches/Version133x/Scribus/scribus/doc/en/install2.html
3,7 → 3,7
<h2>Requirements</h2>
<p>The programs you will need to compile Scribus are:</p>
<ol>
<li><strong>For Scribus 1.3.x+ GCC 3.x+ is required, GCC 3.3+ is strongly recommended</strong>. The Scribus Team has tested compiling with GCC 4.1 and recommends its use, if available, for the performance benefits.</li>
<li><strong>For Scribus 1.3.x+ GCC 3.x+ is required, GCC 4.1+ is strongly recommended</strong>. The Scribus Team has tested compiling with GCC 4.2 and recommends its use, if available, for the performance benefits.</li>
<li>autoconf 2.53+</li>
<li>automake 1.6.3+</li>
<li>GNU make</li>
10,20 → 10,20
</ol>
The dependencies for compilation, and also to run Scribus are:
<ol>
<li>Qt 3.3.4+, both the runtime libraries and development libraries. We recommend using Qt 3.3.6+. <strong>Qt =&#060; 3.2.x is not supported.</strong></li>
<li>Qt 3.3.4+, both the runtime libraries and development libraries. We recommend using Qt 3.3.8. <strong>Qt =&#060; 3.2.x is not supported.</strong></li>
<li>Python and python-devel libraries 2.3+. You can disable Python support with <code>configure --without-python</code>. Python 2.2 is not supported.</li>
<li>Freetype2 2.1.7+. Due to various freetype2 bugs, we recommend, if your distribution/OS allows, to use 2.3.x</li>
<li>libart_lgpl 2.3.10+, 2.3.17+ recommended.</li>
<li>libxml2 2.6+.</li>
<li>Ghostscript 8.15+ or GPL Ghostscript 8.56+ is highly recommended. Ubuntu users in particular are urged to update to a newer version if possible.</li>
<li>Ghostscript 8.15+ or GPL Ghostscript 8.57+ is highly recommended. Ubuntu users in particular are urged to update to a newer version if possible.</li>
<li>Postscript-Fonts. TrueType Fonts. Scribus also can support OpenType fonts, both TrueType and Type 1 Outline OpenType Fonts.</li>
<li>Littlecms - also known as lcms in some distributions. Minimum 1.12, 1.15+ recommended. lcms 1.12+ has support for black point generation. 1.3.4cvs+ requires this.</li>
<li>libtiff 3.6.0+</li>
<li>Littlecms - also known as lcms in some distributions. Minimum 1.12, 1.16+ recommended. lcms 1.12+ has support for black point generation. 1.3.4+ requires this.</li>
<li>libtiff 3.6.0+ 1.3.4+ requires this.</li>
<li>libjpeg</li>
</ol>
<h3>Optionally:</h3>
<ul>
<li>Cairo development libraries - You can optionally enable this in 1.3.3+ with <code> --enable-cairo.</code> For 1.3.3.x the mimnimum version is Cairo 1.2.6+. Scribus 1.3.4cvs <strong>requires</strong> a minimum of Cairo 1.4.0</li>
<li>Cairo development libraries - You can optionally enable this in 1.3.3+ with <code> --enable-cairo.</code> For 1.3.3.x the minimum version is Cairo 1.2.6+. Scribus 1.3.4+ <strong>requires</strong> a minimum of Cairo 1.4.0</li>
 
<li>CUPS development libraries - Scribus directly supports printing with CUPS.</li>
<li>Gimp Print development libraries - Scribus directly supports the Gimp Print plug-in with CUPS.</li>
32,6 → 32,7
<li>openssl-devel (Some linux distributions enable ssl support for CUPS, notably Suse Linux)</li>
<li>fontconfig-devel - for auto discovery of fonts on Linux, MacOSX and Unix. Not needed on Windows.</li>
<li>antiword - this is not needed at compile time for MS Word import. Scribus will detect this at run time however.</li>
<li>Scribus 1.3.5svn requires Qt 4.3.0. Qt 4.2.x is not supported. </li>
</ul>
<p>Scribus will run under most any window manager and does not require KDE itself. However, drag and drop functionality will be lost without KDE. One of the Scribus developers runs Gnome. The author of this documentation has made a point of testing each release of Scribus under Blackbox as well. This has shown no incompatibilities or problems for Scribus, except for the loss of drag and drop functionality.</p>
<p>If color management does not work, you may not have installed the development libraries for littlecms. When downloading the package from littlecms the make files are already configured for Linux, so compiling is straight forward. You also need at least one RGB profile and one CMYK profile installed or the color preferences and options will not appear in the menus.</p>
41,5 → 42,5
</td></tr></table></blockquote>
for detailed options</p>
<h4>Using CMake</h4>
<p>In 1.3.3.6+ and 1.3.4cvs, we have added support for using CMake as an alternative for traditional autotools. This is still experimental, but we do encourage willing testers to use CMake and report any issues to the mailing list or IRC. Our aim is to test this on as wide a variety of platforms as possible. Currently, Linux and MacOSX are working reliably. We are very encouraged with the progress of CMake and anticipate autotools support may be removed after the 1.3.4 release. Please see <a href="install4.html">CMake instructions</a> for instructions.</p>
<p>In 1.3.3.6+ and 1.3.4+, we have added support for using CMake as an alternative for traditional autotools. This is still experimental, but we do encourage willing testers to use CMake and report any issues to the mailing list or IRC. Our aim is to test this on as wide a variety of platforms as possible. Currently, Linux and MacOSX are working reliably. We are very encouraged with the progress of CMake and anticipate autotools support has been removed after the 1.3.4 release. Please see <a href="install4.html">CMake instructions</a> for instructions. Scribus 1.3.5+ uses CMake exclusively. </p>
</qt>
/branches/Version133x/Scribus/scribus/doc/fr/install1.html
15,39 → 15,20
 
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
export CVSROOT=:pserver:anoncvs&#64;scribus.info:/cvs
svn co svn://scribus.info/Scribus/branches/Version133x/Scribus
 
</pre>
</td></tr></table></blockquote>
</td></tr></table>
</blockquote>
<p><strong>Scribus 1.3.5 - D&eacute;veloppement</strong></p>
 
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
cvs login
svn co svn://scribus.info/Scribus/trunk/Scribus
</pre>
</td></tr></table></blockquote>
<!--<p>when it asks for a password, press return</p>-->
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
cvs -z3 co Scribus
</pre>
</td></tr></table></blockquote>
</td></tr></table>
</blockquote>
 
<p><strong>Scribus 1.3.x - D&eacute;veloppement</strong></p>
 
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
export CVSROOT=:pserver:anoncvs&#64;scribus.info:/cvs
</pre>
</td></tr></table></blockquote>
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
cvs login
</pre>
</td></tr></table></blockquote>
<!--<p>when it asks for a password, press return</p>-->
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
cvs -z3 co -r Version13x Scribus
</pre>
</td></tr></table></blockquote>
<p>N'importe lequel de ces choix t&eacute;l&eacute;chargera les sources dans votre r&eacute;pertoire courant. Ensuite :</p>
<blockquote><table width="100%" border="1" bgcolor="#eeeeee"><tr><td border="0">
<pre>
56,5 → 37,4
</pre>
</td></tr></table></blockquote>
<p>&Agrave; partir d'ici, suivez les instructions de <a href="install3.html">Compilation et installation</a>.</p>
</qt>
</qt>
/branches/Version133x/Scribus/scribus/doc/fr/install2.html
14,7 → 14,7
<li>Freetype2 2.1.3+. &Agrave; cause de nombreux probl&egrave;mes de freetype2, nous recommandons, si votre distribution/syst&egrave;me d'exploitation le permet, d'utiliser 2.1.10+</li>
<li>libart_lgpl 2.3.10+, 2.3.17+ recommand&eacute;.</li>
<li>libxml 2.6+.</li>
<li>Ghostscript 7.07+ ou AFPL Ghostscript 8.53+ est hautement recommand&eacute;.</li>
<li>Ghostscript 7.07+ ou GPL Ghostscript 8.57+ est hautement recommand&eacute;.</li>
<li>PostScript-Fonts. TrueType Fonts. Scribus supporte &eacute;galement les polices OpenType, TrueType et Type 1 Outline OpenType Fonts dans 1.1.1+.</li>
</ol>
<p>Scribus s'ex&eacute;cutera sous la plupart des gestionnaires de fen&ecirc;tres et ne requiert pas KDE en soi. Cependant, les fonctionnalit&eacute;s de glisser-d&eacute;poser seront perdues sans KDE. Un des d&eacute;veloppeurs de Scribus roule sous Gnome. L'auteur de cette documentation s'est astreint &agrave; tester chaque version de Scribus sous Blackbox &eacute;galement.
30,7 → 30,7
<ul>
<li>Les librairies de d&eacute;veloppement CUPS - Scribus supporte maintenant directement l'impression avec CUPS.</li>
<li>Les librairies de d&eacute;veloppement Gimp Print - Scribus supporte maintenant l'extension Gimp Print avec CUPS.</li>
<li>Littlecms - aussi connu comme lcms dans certaines distributions. Minimum 1.09, 1.12+ recommand&eacute;. lcms 1.12+ supporte la g&eacute;n&eacute;ration du point noir.</li>
<li>Littlecms - aussi connu comme lcms dans certaines distributions. Minimum 1.12, 1.16+ recommand&eacute;. lcms 1.12+ supporte la g&eacute;n&eacute;ration du point noir.</li>
<li>tkinter - pour le script d'&eacute;chantillonnage de police</li>
<li>Les librairies python-imaging pour l'aper&ccedil;u du script d'&eacute;chantillonage de police</li>
<li>openssl-devel (Certaines distributions activent le support ssl pour CUPS, notamment Suse Linux)</li>