Subversion Repositories Scribus

Compare Revisions

Regard whitespace Rev 14020 → Rev 14021

/trunk/Scribus/translations/qm/scribus.ko.qm
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
/trunk/Scribus/translations/po/scribus.ko.ts
1,5 → 1,6
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1" language="ko_KR">
<!DOCTYPE TS>
<TS version="2.0" language="ko_KR">
<context>
<name></name>
<message>
9,7 → 10,7
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
22,7 → 23,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
36,7 → 37,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
49,7 → 50,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
61,7 → 62,7
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
77,7 → 78,7
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
88,33 → 89,9
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="120"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="135"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
122,7 → 99,7
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
145,7 → 122,7
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
182,7 → 159,7
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
193,7 → 170,7
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
202,7 → 179,7
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
246,7 → 223,7
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
285,7 → 262,7
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
295,7 → 272,7
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
303,7 → 280,7
 
Returns true if there is a document open.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
313,7 → 290,7
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
325,7 → 302,7
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
336,7 → 313,7
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
345,7 → 322,7
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
355,7 → 332,7
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
366,7 → 343,7
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
376,7 → 353,7
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
385,7 → 362,7
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
396,7 → 373,7
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
405,7 → 382,7
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
413,7 → 390,7
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
422,7 → 399,7
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
431,7 → 408,7
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
439,7 → 416,7
 
Delete the named master page.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
448,7 → 425,7
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
457,7 → 434,7
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
466,7 → 443,7
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
475,7 → 452,7
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
484,7 → 461,7
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
493,7 → 470,7
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
502,7 → 479,7
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
511,7 → 488,7
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
521,7 → 498,7
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
531,7 → 508,7
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
541,7 → 518,7
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
550,7 → 527,7
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
560,7 → 537,7
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
569,7 → 546,7
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
578,7 → 555,7
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
589,7 → 566,7
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
600,7 → 577,7
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
610,7 → 587,7
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
618,7 → 595,7
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
629,7 → 606,7
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
639,7 → 616,7
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
656,7 → 633,7
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
668,7 → 645,7
 
See getProperty() for more information.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
679,7 → 656,7
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
690,7 → 667,7
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
702,7 → 679,7
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
712,7 → 689,7
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
721,7 → 698,7
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
731,7 → 708,7
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
739,7 → 716,7
 
Returns the number of selected objects.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
747,7 → 724,7
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
755,7 → 732,7
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
765,7 → 742,7
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
772,7 → 749,7
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
786,7 → 763,7
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
797,34 → 774,9
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="167"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="180"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="191"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
832,7 → 784,7
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="201"/>
841,7 → 793,7
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="213"/>
853,7 → 805,7
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
863,7 → 815,7
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
871,7 → 823,7
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
880,7 → 832,7
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
895,7 → 847,7
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
903,7 → 855,7
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
914,7 → 866,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
922,7 → 874,7
 
Returns the name of the current active layer.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
934,7 → 886,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
946,7 → 898,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
958,7 → 910,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
970,7 → 922,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
982,7 → 934,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
994,7 → 946,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
1005,7 → 957,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
1016,7 → 968,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
1029,7 → 981,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
1042,7 → 994,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
1055,7 → 1007,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
1068,7 → 1020,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
1080,7 → 1032,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
1091,7 → 1043,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
1102,7 → 1054,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
1114,7 → 1066,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
1124,7 → 1076,7
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
1132,7 → 1084,7
 
Returns a string with the -lang value.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
1140,7 → 1092,7
 
Moves current selection to front.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
1148,7 → 1100,7
 
Moves current selection to back.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
1162,7 → 1114,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
1176,7 → 1128,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
1190,7 → 1142,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
1204,7 → 1156,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
1218,7 → 1170,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
1235,7 → 1187,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
1254,7 → 1206,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
1274,7 → 1226,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
1289,7 → 1241,7
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
1298,7 → 1250,7
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
1312,7 → 1264,7
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
1322,7 → 1274,7
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
1331,7 → 1283,7
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
1339,7 → 1291,7
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
1347,7 → 1299,7
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
1361,7 → 1313,7
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
1370,7 → 1322,7
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
1378,7 → 1330,7
 
Redraws all pages.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
1386,7 → 1338,7
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
1396,7 → 1348,7
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
1408,7 → 1360,7
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
1420,7 → 1372,7
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
1428,7 → 1380,7
 
Returns the number of pages in the document.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
1437,7 → 1389,7
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
1449,7 → 1401,7
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
1457,7 → 1409,7
 
See getHGuides.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
1465,7 → 1417,7
 
See setHGuides.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
1474,7 → 1426,7
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
1485,7 → 1437,7
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
1494,7 → 1446,7
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
1507,7 → 1459,7
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
1517,19 → 1469,9
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="44"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
1537,7 → 1479,7
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="54"/>
1546,7 → 1488,7
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="64"/>
1555,7 → 1497,7
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="74"/>
1564,7 → 1506,7
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="84"/>
1573,7 → 1515,7
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="94"/>
1582,7 → 1524,7
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="107"/>
1594,7 → 1536,7
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
1607,7 → 1549,7
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
1617,7 → 1559,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
1627,7 → 1569,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="154"/>
1637,7 → 1579,7
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="168"/>
1650,7 → 1592,7
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="180"/>
1661,7 → 1603,7
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="192"/>
1672,7 → 1614,7
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
1719,7 → 1661,7
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
1780,7 → 1722,7
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
1791,7 → 1733,7
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
1802,7 → 1744,7
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
1811,7 → 1753,7
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
1820,7 → 1762,7
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
1831,7 → 1773,7
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
1842,7 → 1784,7
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
1851,7 → 1793,7
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
1861,7 → 1803,7
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
1870,7 → 1812,7
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
1879,7 → 1821,7
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
1890,7 → 1832,7
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
1903,7 → 1845,7
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
1915,7 → 1857,7
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
1928,7 → 1870,7
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
1940,7 → 1882,7
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
1952,7 → 1894,7
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
1963,7 → 1905,7
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
1974,7 → 1916,7
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
1986,7 → 1928,7
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
1999,7 → 1941,7
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
2009,7 → 1951,7
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
2019,7 → 1961,7
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
2028,27 → 1970,9
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="315"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
2058,7 → 1982,7
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="328"/>
2070,7 → 1994,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="345"/>
2082,7 → 2006,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="358"/>
2090,7 → 2014,7
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="372"/>
2102,7 → 2026,7
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="385"/>
2113,7 → 2037,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="399"/>
2124,7 → 2048,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="414"/>
2135,7 → 2059,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="426"/>
2146,7 → 2070,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
2155,7 → 2079,7
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
2164,7 → 2088,7
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
2173,7 → 2097,7
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
2187,7 → 2111,7
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
2195,7 → 2119,7
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
2205,7 → 2129,7
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
2214,7 → 2138,7
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
2222,7 → 2146,7
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
2233,7 → 2157,7
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
2244,7 → 2168,7
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
2255,7 → 2179,7
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
2266,8 → 2190,85
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="120"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="135"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="167"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="180"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
</context>
<context>
<name>AIPlug</name>
2274,7 → 2275,7
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
<source>Importing: %1</source>
<translation>들여오는 중: %1</translation>
<translation>읽어오는 중: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
2289,7 → 2290,7
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2469"/>
<source>Generating Items</source>
<translation>객체 생성 중</translation>
<translation>항목 생성 중</translation>
</message>
</context>
<context>
2297,27 → 2298,27
<message>
<location filename="../../scribus/about.cpp" line="97"/>
<source>About Scribus %1</source>
<translation>Scribus %1에 대하여</translation>
<translation>Scribus %1 소개</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="125"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="133"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="183"/>
<source>Using Ghostscript version %1</source>
<translation>Ghostscript버전 %1 사용 중</translation>
<translation>고스트스크립트 버전 %1 사용 중</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="185"/>
<source>No Ghostscript version available</source>
<translation>사용 가능한 Ghostscript 버전이 없습니다</translation>
<translation>고스트스크립트 버전 사용 불가</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
2327,7 → 2328,7
<message>
<location filename="../../scribus/about.cpp" line="188"/>
<source>&amp;About</source>
<translation>대하여(&amp;A)</translation>
<translation>소개(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="297"/>
2342,7 → 2343,7
<message>
<location filename="../../scribus/about.cpp" line="299"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>맥 OS&amp;#174; X 아쿠아 포트:</translation>
<translation>Mac OS&amp;#174; X Aqua 포트:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="303"/>
2360,9 → 2361,14
<translation>기타 문서:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="317"/>
<source>Tango Project Icons:</source>
<translation>탕고 프로젝트 아이콘:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="201"/>
<source>A&amp;uthors</source>
<translation>저자(&amp;U)</translation>
<translation>저작자(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="329"/>
2372,7 → 2378,7
<message>
<location filename="../../scribus/about.cpp" line="331"/>
<source>Previous Translation Contributors:</source>
<translation>기존 번역 참여자:</translation>
<translation>이전 번역 기여자:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="215"/>
2387,17 → 2393,17
<message>
<location filename="../../scribus/about.cpp" line="347"/>
<source>Online Reference</source>
<translation>온라인 참조</translation>
<translation>온라인 참고자료</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="349"/>
<source>Wiki</source>
<translation>Wiki</translation>
<translation>위키</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="351"/>
<source>Bugs and Feature Requests</source>
<translation>버그와 특성 요청</translation>
<translation>버그 및 특성 요청</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="355"/>
2410,24 → 2416,19
<translation>온라인(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="229"/>
<source>&amp;Updates</source>
<translation>업데이트(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="265"/>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="317"/>
<source>Tango Project Icons:</source>
<translation>Tango 프로젝트 아이콘:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="229"/>
<source>&amp;Updates</source>
<translation>업데이트(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="277"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Scribus를 업데이트하기 위하여 체크합니다. 여러분의 PC의 자료는 전송되지 않습니다.</translation>
<translation>Scribus 업데이트 체크. 여러분의 컴퓨터 정보를 전송하지 않습니다.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="301"/>
2437,32 → 2438,32
<message>
<location filename="../../scribus/about.cpp" line="315"/>
<source>Splash Screen:</source>
<translation>스플래시 화면:</translation>
<translation>시동 화면:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="273"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>Scribus에서,버전과 빌드 날짜 그리고 컴파일된 라이브러리 지원을 나타냅니다.</translation>
<translation>이 패널은 Scribus의 버전, 빌드 날짜와 컴파일된 라이브러리 지원이 보입니다.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="274"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>C-C-T-F는 C=littlecms C=CUPS T=TIFF지원 F=Fontconfig지원과 같습니다. 최종 문자는 렌더러 C=cairo 또는 Q=Qt입니다</translation>
<translation>C-C-T-F에서 C=littlecms C=CUPS T=TIFF 지원 F=Fontconfig 지원입니다. 마지막 문자는 C=cairo 또는 Q=Qt 렌더러입니다</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="275"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>*.은 빠진 라이브러리 지원을 나타냅니다. 이것은 또한 Scribus가 인지한 Ghostscript 버전을 나타냅니다.</translation>
<translation>빠진 라이브러리 지원은 *에 의해서 나타납니다. 이것은 Scribus가 탐지한 고스트스크립트 버전을 나타냅니다.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="276"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>Windows 버전은 fontconfig 또는 CUPS 라이브러리를 이용하지 않습니다.</translation>
<translation>윈도우 버전은 fontconfig 또는 CUPS 라이브러리를 사용하지 않습니다.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p 배열=&quot;중앙&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p 배열=&quot;중앙&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
2477,7 → 2478,7
<message>
<location filename="../../scribus/about.cpp" line="647"/>
<source>Abort Update Check</source>
<translation>뎁데이트 체크 취소</translation>
<translation>업데이트 체크 취소</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="353"/>
2487,134 → 2488,76
<message>
<location filename="../../scribus/about.cpp" line="240"/>
<source>&amp;Licence</source>
<translation>허가권(&amp;L)</translation>
<translation>라이센스(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="249"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>허가권 파일을 열수 없음. 허가권 정보를 위하여 설치 폴더 또는 Scribus 웹사이트를 체크하시오.</translation>
<translation>라이센스 파일을 열 수 없습니다. 라이센스 정보는 설치 폴더 또는 Scribus 웹사이트를 체크하세요.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="309"/>
<source>Doc Translators:</source>
<translation type="unfinished"></translation>
<translation>문서 번역자:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="313"/>
<source>Webmasters:</source>
<translation type="unfinished"></translation>
<translation>웹 마스터:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="625"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation type="unfinished"></translation>
<translation>파일 %1을 열 수 없습니다. %1 정보를 위하여 설치 폴더 또는 Scribus 웹사이트를 체크하세요.</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: 플러그인에 대하여</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation type="unfinished"></translation>
<translation>파일명:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation type="unfinished">버전:</translation>
<translation>버전:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation type="unfinished">가능:</translation>
<translation>가능:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation type="unfinished">공개 날짜:</translation>
<translation>배포 날짜:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation type="unfinished">설명:</translation>
<translation>요약:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation type="unfinished">저작자:</translation>
<translation>저작자:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation type="unfinished">저작권:</translation>
<translation>저작권:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation type="unfinished">허가권:</translation>
<translation>저작권:</translation>
</message>
</context>
<context>
<name>AboutPluginsBase</name>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation type="obsolete">Scribus: 플러그인에 대하여</translation>
<translation>Scribus: 플러그인 정보</translation>
</message>
<message>
<location filename="" line="0"/>
<source>File Name:</source>
<translation type="obsolete">파일명:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Version:</source>
<translation type="obsolete">버전:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Enabled:</source>
<translation type="obsolete">가능:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Release Date:</source>
<translation type="obsolete">공개 날짜:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Copyright:</source>
<translation type="obsolete">저작권:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Author(s):</source>
<translation type="obsolete">저작자:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Description:</source>
<translation type="obsolete">설명:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>License:</source>
<translation type="obsolete">허가권:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Close</source>
<translation type="obsolete">닫기(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
</context>
<context>
<name>ActionManager</name>
2621,7 → 2564,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
<translation>새로(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
2641,47 → 2584,47
<message>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<source>Save &amp;As...</source>
<translation>다른 이름으로(&amp;A)...</translation>
<translation>다른 이름으로 저장(&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<source>Re&amp;vert to Saved</source>
<translation>이전 저장 파일로 복원(&amp;V)</translation>
<translation>이전 파일로 복원(&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<source>Collect for O&amp;utput...</source>
<translation>저장 폴더 지정(&amp;U)...</translation>
<translation>작업 폴더 지정(&amp;U)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<source>Get Text...</source>
<translation>텍스트 파일 얻기...</translation>
<translation>문자열 파일 읽어오기...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<source>Append &amp;Text...</source>
<translation>텍스트 추가하기(&amp;T)...</translation>
<translation>문자열 첨부하기(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1267"/>
<source>Get Image...</source>
<translation>이미지 얻기...</translation>
<translation>이미지 파일 얻기...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<source>Save &amp;Text...</source>
<translation>텍스트 저장(&amp;T)...</translation>
<translation>문자열 저장(&amp;T)...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Save Page as &amp;EPS...</source>
<translation type="obsolete">EPS 저장(&amp;E)...</translation>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Save as &amp;EPS...</source>
<translation>EPS로 저장(&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<source>Save as P&amp;DF...</source>
<translation>PDF 저장(&amp;D)...</translation>
<translation>PDF로 저장(&amp;D)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
2689,6 → 2632,11
<translation>문서 설정(&amp;S)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>P&amp;references...</source>
<translation>기본 설정(&amp;R)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<source>&amp;Print...</source>
<translation>인쇄(&amp;P)...</translation>
2706,7 → 2654,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<source>&amp;Undo</source>
<translation>이전작업(&amp;U)</translation>
<translation>이전으로(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
2716,7 → 2664,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<source>&amp;Item Action Mode</source>
<translation>객체 실행 모드(&amp;I)</translation>
<translation>객체 작업 모드(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
2734,11 → 2682,16
<translation>붙여넣기(&amp;P)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;lear Contents</source>
<translation type="obsolete">내용 삭제(&amp;L)</translation>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>Paste (&amp;Absolute)</source>
<translation>붙여넣기(절대)(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>C&amp;lear</source>
<translation>지우기(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<source>Select &amp;All</source>
<translation>전체 선택(&amp;A)</translation>
2746,7 → 2699,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1291"/>
<source>&amp;Deselect All</source>
<translation>전체 선택 취소(&amp;D)</translation>
<translation>전체 선택 해제(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1292"/>
2764,14 → 2717,14
<translation>색상(&amp;O)...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Paragraph Styles...</source>
<translation type="obsolete">문단 스타일(&amp;P)...</translation>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<source>Patterns...</source>
<translation>패턴...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Line Styles...</source>
<translation type="obsolete">선 스타일(&amp;L)...</translation>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>S&amp;tyles...</source>
<translation>스타일(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
2784,11 → 2737,6
<translation>자바스크립트(&amp;J)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>P&amp;references...</source>
<translation>기본 설정(&amp;R)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1307"/>
<source>%1 pt</source>
<translation>%1 포인트</translation>
2824,14 → 2772,9
<translation>강제(&amp;F)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;%1 %</source>
<translation type="obsolete">&amp;%1 %</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Normal</source>
<translation>보통(&amp;N)</translation>
<translation>일반(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
2841,7 → 2784,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<source>Underline &amp;Words</source>
<translation>밑줄 단어(&amp;W)</translation>
<translation>단어 밑줄(&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
2869,9 → 2812,10
<translation>아래첨자(&amp;B)</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>&amp;Outline</source>
<translation type="obsolete">윤곽선(&amp;O)</translation>
<comment>type effect</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
2896,7 → 2840,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<source>&amp;Multiple Duplicate</source>
<translation>다수 복제(&amp;M)</translation>
<translation>다수 객체 복제(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
2916,7 → 2860,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<source>Is &amp;Locked</source>
<translation>잠금(&amp;L)</translation>
<translation>잠김(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
2924,24 → 2868,39
<translation>크기 잠금(&amp;Z)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>&amp;Printing Enabled</source>
<translation>인쇄 가능(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Flip Horizontally</source>
<translation>수평 뒤집기(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Flip Vertically</source>
<translation>수직 뒤집기(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<source>Lower to &amp;Bottom</source>
<translation>아래로 이동(&amp;B)</translation>
<translation>끝으로 이동(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<source>Raise to &amp;Top</source>
<translation>위로 이동(&amp;T)</translation>
<translation>처음으로 이동(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<source>&amp;Lower</source>
<translation>내리기(&amp;L)</translation>
<translation>아래로 이동(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<source>&amp;Raise</source>
<translation>올리기(&amp;R)</translation>
<translation>위로 이동(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
2949,6 → 2908,11
<translation>스크랩북으로 보내기(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>Send to Patterns</source>
<translation>패턴으로 보내기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<source>&amp;Attributes...</source>
<translation>속성(&amp;A)...</translation>
2956,12 → 2920,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<source>More Info...</source>
<translation>자세한 정보...</translation>
<translation>더 많은 정보...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<source>I&amp;mage Visible</source>
<translation>이미지 보기(&amp;M)</translation>
<translation>이미지 보이기(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
2996,7 → 2960,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<source>Is PDF &amp;Bookmark</source>
<translation>PDF 북마크(&amp;B)</translation>
<translation>PDF 책갈피(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
3016,17 → 2980,17
<message>
<location filename="../../scribus/actionmanager.cpp" line="1370"/>
<source>&amp;Edit Shape...</source>
<translation>도형 편집(&amp;E)...</translation>
<translation>모양 편집(&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<source>&amp;Attach Text to Path</source>
<translation>텍스트를 경로에 붙임(&amp;A)</translation>
<translation>문자열을 경로로 붙이기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<source>&amp;Detach Text from Path</source>
<translation>경로에서 텍스트를 분리함(&amp;D)</translation>
<translation>경로에서 문자열 분리하기(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
3041,7 → 3005,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<source>&amp;Bezier Curve</source>
<translation>베지어 곡선(&amp;B)</translation>
<translation>베지어선(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
3049,9 → 3013,10
<translation>이미지 프레임(&amp;I)</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Outlines</source>
<translation type="obsolete">윤곽선(&amp;O)</translation>
<comment>Convert to oulines</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
3061,9 → 3026,14
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<source>&amp;Text Frame</source>
<translation>텍스트 프레임(&amp;T)</translation>
<translation>문자열 프레임(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>&amp;Frame...</source>
<translation>프레임(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<source>&amp;Glyph...</source>
<translation>사용자 문자표(&amp;G)...</translation>
3071,7 → 3041,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<source>Sample Text</source>
<translation>예제 텍스트</translation>
<translation>샘플 문자열</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
3106,7 → 3076,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<source>Convert to Master Page...</source>
<translation>마스터 페이지 변환...</translation>
<translation>마스터 페이지로 변환...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
3119,34 → 3089,29
<translation>페이지 속성 설정...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Fit in window</source>
<translation type="obsolete">창 조정(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
<translation>50%(&amp;5)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
<translation>75%(&amp;7)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
<translation>100%(&amp;1)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
<translation>200%(&amp;2)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Thumbnails</source>
<translation type="obsolete">썸네일(&amp;T)</translation>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Preview Mode</source>
<translation>이전 모드</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
3159,6 → 3124,11
<translation>프레임 보이기(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<source>Show Layer Indicators</source>
<translation>레이어 지시자 보이기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<source>Show &amp;Images</source>
<translation>이미지 보이기(&amp;I)</translation>
3174,6 → 3144,11
<translation>안내선 보이기(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<source>Show Text Frame Columns</source>
<translation>문자열 프레임 열 보이기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<source>Show &amp;Baseline Grid</source>
<translation>기준선 격자 보이기(&amp;B)</translation>
3181,7 → 3156,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<source>Show &amp;Text Chain</source>
<translation>텍스트 체인 보이기(&amp;T)</translation>
<translation>문자열 링크 체인 보이기(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
3189,9 → 3164,9
<translation>제어문자 보이기</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation type="obsolete">페이지 관련 눈금자</translation>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>Show Rulers</source>
<translation>눈금자 보이기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
3199,11 → 3174,6
<translation>격자에 붙이기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Move/Resize Value Indicator</source>
<translation>이동/크기 재조정 지시자</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<source>Sna&amp;p to Guides</source>
<translation>안내선에 붙이기(&amp;P)</translation>
3211,9 → 3181,15
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<source>&amp;Properties</source>
<translation>속성 편집(&amp;P)</translation>
<translation>속성(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<source>&amp;Scrapbook</source>
<translation>스크랩북(&amp;S)</translation>
3231,7 → 3207,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<source>&amp;Bookmarks</source>
<translation>북마크(&amp;B)</translation>
<translation>책갈피(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
3251,7 → 3227,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<source>&amp;Align and Distribute</source>
<translation>정렬/배치(&amp;A)</translation>
<translation>정렬 및 배치(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
3266,37 → 3242,17
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<source>Select Item</source>
<translation>객체 선택</translation>
<translation>항목 선택</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1351"/>
<source>T&amp;able</source>
<translation type="obsolete">표(&amp;A)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1352"/>
<source>&amp;Shape</source>
<translation type="obsolete">도형(&amp;S)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1354"/>
<source>&amp;Line</source>
<translation type="obsolete">선(&amp;L)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1356"/>
<source>&amp;Freehand Line</source>
<translation type="obsolete">자유로운 선(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<source>Rotate Item</source>
<translation>객체 회전</translation>
<translation>항목 회전</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<source>Zoom in or out</source>
<translation>돋보기</translation>
<translation>배율</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
3316,17 → 3272,17
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<source>Edit Text...</source>
<translation>텍스트 편집...</translation>
<translation>문자열 편집...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<source>Link Text Frames</source>
<translation>텍스트 프레임 링크</translation>
<translation>문자열 프레임 링크</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<source>Unlink Text Frames</source>
<translation>텍스트 프레임 링크 해제</translation>
<translation>문자열 프레임 링크해제</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
3336,72 → 3292,57
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<source>Copy Item Properties</source>
<translation>객체 속성 복사</translation>
<translation>항목 속성 복사</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1368"/>
<source>Edit the text with the Story Editor</source>
<translation type="obsolete">스토리 편집기로 텍스트 편집</translation>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>Insert PDF Push Button</source>
<translation>PDF 푸시 단추 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1370"/>
<source>Insert Text Frame</source>
<translation type="obsolete">텍스트 프레임 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Insert PDF Text Field</source>
<translation>PDF 문자열 필드 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1371"/>
<source>Insert Image Frame</source>
<translation type="obsolete">이미지 프레임 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<source>Insert PDF Check Box</source>
<translation>PDF 체크상자 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1372"/>
<source>Insert Table</source>
<translation type="obsolete">표 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1465"/>
<source>Insert PDF Combo Box</source>
<translation>PDF 콤보상자 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1373"/>
<source>Insert Shape</source>
<translation type="obsolete">도형 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<source>Insert PDF List Box</source>
<translation>PDF 목록 상자 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1374"/>
<source>Insert Polygon</source>
<translation type="obsolete">다각형 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>Insert Text Annotation</source>
<translation>문자열 주석 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1375"/>
<source>Insert Line</source>
<translation type="obsolete">선 삽입</translation>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert Link Annotation</source>
<translation>링크 주석 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1376"/>
<source>Insert Bezier Curve</source>
<translation type="obsolete">베지어 곡선 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1377"/>
<source>Insert Freehand Line</source>
<translation type="obsolete">자유로운 선 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1412"/>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">이미지 관리(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<source>&amp;Hyphenate Text</source>
<translation>하이픈 연결(&amp;H)</translation>
<translation>문자열 연결(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<source>Dehyphenate Text</source>
<translation>하이픈 연결 해제</translation>
<translation>문자열 연결 해제</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<source>&amp;Generate Table Of Contents</source>
<translation>목차 생성(&amp;G)</translation>
<translation>내용 표 생성(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
3416,42 → 3357,47
<message>
<location filename="../../scribus/actionmanager.cpp" line="1482"/>
<source>&amp;About Scribus</source>
<translation>Scribus에 대하여(&amp;A)</translation>
<translation>Scribus 소개(&amp;A)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1423"/>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">플러그인에 대하여(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<source>About &amp;Qt</source>
<translation>Qt에 대하여(&amp;Q)</translation>
<translation>Qt 소개(&amp;Q)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<source>Toolti&amp;ps</source>
<translation>도구설명(&amp;P)</translation>
<translation>도구 도움말(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1487"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribus 메뉴얼(&amp;M)...</translation>
<translation>Scribus 매뉴얼(&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Toggle Palettes</source>
<translation>팔레트 토글</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<source>Toggle Guides</source>
<translation>안내선 토글</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<source>Smart &amp;Hyphen</source>
<translation>하이픈 능동적용(&amp;H)</translation>
<translation>스마트 하이픈(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<source>Non Breaking Dash</source>
<translation>개행없음 대시</translation>
<translation>보호된 하이픈</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<source>Non Breaking &amp;Space</source>
<translation>개행없음 공백(&amp;S)</translation>
<translation>보호된 공백(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
3461,17 → 3407,17
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<source>New Line</source>
<translation>새로운 줄</translation>
<translation>새 줄</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<source>Frame Break</source>
<translation>프레임 개행</translation>
<translation>프레임 분리</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<source>Column Break</source>
<translation>열 개행</translation>
<translation>열 분리</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
3489,172 → 3435,59
<translation>등록상표(T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Solidus</source>
<translation>역슬래시</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<source>Bullet</source>
<translation>작은 점</translation>
<translation>점</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Middle Dot</source>
<translation>작은 사각형</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<source>Em Dash</source>
<translation>Em 대시</translation>
<translation>중간 긴 실선</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<source>En Dash</source>
<translation>En 대시</translation>
<translation>중간 짧은 실선</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<source>Figure Dash</source>
<translation>숫자 대시</translation>
<translation>그림 실선</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<source>Quotation Dash</source>
<translation>인용 대시</translation>
<translation>인용 실선</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Apostrophe</source>
<translation type="obsolete">어포스트로피</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Toggle Palettes</source>
<translation>팔레트 전환</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<source>Toggle Guides</source>
<translation>안내선 전환</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Copy Contents</source>
<translation type="obsolete">내용 복사</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Paste Contents</source>
<translation type="obsolete">내용 붙여넣기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>Paste (&amp;Absolute)</source>
<translation>붙여넣기 (절대값)(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>S&amp;tyles...</source>
<translation>스타일(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>&amp;Printing Enabled</source>
<translation>인쇄 가능(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Flip Horizontally</source>
<translation>수평 뒤집기(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Flip Vertically</source>
<translation>수직 뒤집기(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>Show Rulers</source>
<translation>눈금자 보기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>문서 전체 윤곽(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>Insert PDF Push Button</source>
<translation>PDF 누름 버튼 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Insert PDF Text Field</source>
<translation>PDF 텍스트 필드 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<source>Insert PDF Check Box</source>
<translation>PDF 체크 상자 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1465"/>
<source>Insert PDF Combo Box</source>
<translation>PDF 콤보 상자 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<source>Insert PDF List Box</source>
<translation>PDF 목록 상자 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>Insert Text Annotation</source>
<translation>텍스트 주석 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert Link Annotation</source>
<translation>링크 주석 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Solidus</source>
<translation>사선</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Middle Dot</source>
<translation>중간 점</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1545"/>
<source>En Space</source>
<translation>En 공백</translation>
<translation>공백</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1546"/>
<source>Em Space</source>
<translation>Em 공백</translation>
<translation>중간 긴 공백</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1547"/>
<source>Thin Space</source>
<translation>좁은 공백</translation>
<translation>얇은 공백</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1548"/>
<source>Thick Space</source>
<translation>두터운 공백</translation>
<translation>두꺼운 공백</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1549"/>
3664,99 → 3497,44
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
<source>Hair Space</source>
<translation>헤어 공백</translation>
<translation>머리 공백</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1461"/>
<source>Insert Smart Hyphen</source>
<translation type="obsolete">능동 적용 하이픈 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1462"/>
<source>Insert Non Breaking Dash</source>
<translation type="obsolete">개행없음 대시 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1463"/>
<source>Insert Non Breaking Space</source>
<translation type="obsolete">개행없음 공백 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1464"/>
<source>Insert Page Number</source>
<translation type="obsolete">페이지 번호 삽입</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1562"/>
<source>ff</source>
<translation>ff</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1563"/>
<source>fi</source>
<translation>fi</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1564"/>
<source>fl</source>
<translation>fl</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1565"/>
<source>ffi</source>
<translation>ffi</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1566"/>
<source>ffl</source>
<translation>ffl</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1567"/>
<source>ft</source>
<translation>ft</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1568"/>
<source>st</source>
<translation>st</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Save as &amp;EPS...</source>
<translation>EPS 저장(&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<source>Show Text Frame Columns</source>
<translation>텍스트 프레임 열 보이기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>&amp;Frame...</source>
<translation>프레임(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Preview Mode</source>
<translation>미리보기 모드</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<source>Show Layer Indicators</source>
<translation>레이어 지시자 보기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<source>Patterns...</source>
<translation>색상표...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>Send to Patterns</source>
<translation>색상표에 저장</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<source>Sticky Tools</source>
<translation>스티키 도구</translation>
3779,12 → 3557,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<source>&amp;Zero Width Space</source>
<translation>0 너비 공백(&amp;Z)</translation>
<translation>너비없는 공백(&amp;Z)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<source>Zero Width NB Space</source>
<translation>0 너비 NB 공백</translation>
<translation>너비없는 보호된 공백</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
3897,12 → 3675,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
<translation>400%(&amp;4)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<source>Insert &amp;Text Frame</source>
<translation>텍스트 프레임 삽입(&amp;T)</translation>
<translation>문자열 프레임 삽입(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1453"/>
3937,7 → 3715,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1460"/>
<source>Insert &amp;Freehand Line</source>
<translation>자유로운 선 삽입(&amp;F)</translation>
<translation>자유곡선 삽입(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
3952,12 → 3730,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
<translation>Scribus 위키</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<source>Getting Started with Scribus</source>
<translation>Scribus 시작하기</translation>
<translation>Scribus 위키 온라인 도움말</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
3972,12 → 3750,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1483"/>
<source>&amp;About Plugins</source>
<translation>플러그인에 대하여(&amp;A)</translation>
<translation>플러그인 소개(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Unicode문자 시작 순서 삽입</translation>
<translation>유니코드 문자 시작 순서 입력</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
3987,7 → 3765,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1290"/>
<source>Advanced Select All...</source>
<translation>고급 객체 선택...</translation>
<translation>고급 전체 선택...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
4002,7 → 3780,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<source>Rulers Relative to Page</source>
<translation>페이지 관련 눈금자</translation>
<translation>페이지를 기준으로 한 눈금자</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
4020,130 → 3798,135
<translation>페이지 총수</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<source>New &amp;from Template...</source>
<translation type="unfinished">서식에서 새 파일(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<source>Adjust Image to Frame</source>
<translation type="unfinished"></translation>
<translation>이미지를 프레임에 맞게 조정</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>File</source>
<translation type="unfinished">파일</translation>
<translation>파일</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>&amp;File</source>
<translation type="unfinished">파일(&amp;F)</translation>
<translation>파일(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>Edit</source>
<translation type="unfinished">편집</translation>
<translation>편집</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>&amp;Edit</source>
<translation type="unfinished">편집(&amp;E)</translation>
<translation>편집(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>Style</source>
<translation type="unfinished"></translation>
<translation>스타일</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>&amp;Style</source>
<translation type="unfinished"></translation>
<translation>스타일(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>Item</source>
<translation type="unfinished">항목</translation>
<translation>객체</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>&amp;Item</source>
<translation type="unfinished">객체(&amp;I)</translation>
<translation>객체(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>Insert</source>
<translation type="unfinished">삽입</translation>
<translation>입력</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>I&amp;nsert</source>
<translation type="unfinished">삽입(&amp;N)</translation>
<translation>삽입(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>Page</source>
<translation type="unfinished"></translation>
<translation>페이지</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>&amp;Page</source>
<translation type="unfinished">페이지(&amp;P)</translation>
<translation>페이지(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>View</source>
<translation type="unfinished">보기</translation>
<translation>보기</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>&amp;View</source>
<translation type="unfinished">보기(&amp;V)</translation>
<translation>보기(&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>Extras</source>
<translation type="unfinished">확장</translation>
<translation>기타</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>E&amp;xtras</source>
<translation type="unfinished"></translation>
<translation>기타(&amp;X)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>Windows</source>
<translation type="unfinished">창</translation>
<translation>작업창</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>&amp;Windows</source>
<translation type="unfinished">창(&amp;W)</translation>
<translation>작업창(&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>Help</source>
<translation type="unfinished">도움말</translation>
<translation>도움말</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>&amp;Help</source>
<translation type="unfinished">도움말(&amp;H)</translation>
<translation>도움말(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1876"/>
<source>Plugin Menu Items</source>
<translation type="unfinished">플러그인 메뉴 항목</translation>
<translation>플러그인 메뉴 객체</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1878"/>
<source>Others</source>
<translation type="unfinished">기타</translation>
<translation>기타</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1880"/>
<source>Unicode Characters</source>
<translation type="unfinished">유니코드 문자</translation>
<translation>유니코드 문자</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Move/Resize Value Indicator</source>
<translation>이동/크기 조정 값 지시자</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<source>New &amp;from Template...</source>
<translation>서식에서 새로(&amp;F)...</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
4168,7 → 3951,7
<message>
<location filename="../../scribus/aligndistribute.ui" line="92"/>
<source>&amp;Relative To:</source>
<translation>관계(&amp;R):</translation>
<translation>상대 위치(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="431"/>
4194,24 → 3977,19
<translation>정렬 및 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation>정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="93"/>
<source>&amp;Relative to:</source>
<translation>기준(&amp;R):</translation>
<translation>비례(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="96"/>
<source>First Selected</source>
<translation>처음 선택된 것</translation>
<translation>처음 선택</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="97"/>
<source>Last Selected</source>
<translation>마지막 선택된 것</translation>
<translation>마지막 선택</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="98"/>
4234,31 → 4012,16
<translation>선택</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Align right sides of objects to left side of anchor</source>
<translation type="obsolete">객체 오른쪽에서 고정점 왼쪽면으로 정렬</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Align left sides of objects to right side of anchor</source>
<translation type="obsolete">객체 왼쪽에서 고정점 오른쪽면으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="111"/>
<source>Align bottoms</source>
<translation>아래 정렬</translation>
<translation>단추 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="113"/>
<source>Align right sides</source>
<translation>오른쪽 정렬</translation>
<translation>오른쪽 면 정렬</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Align tops of objects to bottom of anchor</source>
<translation type="obsolete">객체 위에서 고정점 아래로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="117"/>
<source>Center on vertical axis</source>
<translation>수직축 중앙</translation>
4274,14 → 4037,9
<translation>수평 축 중앙</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Align bottoms of objects to top of anchor</source>
<translation type="obsolete">객체 아래에서 고정점 위로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="125"/>
<source>Align tops</source>
<translation>위로 정렬</translation>
<translation>상단에 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="127"/>
4289,59 → 4047,34
<translation>선택된 안내선(&amp;S):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation>배치</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make horizontal gaps between objects equal</source>
<translation type="obsolete">객체 사이 수평 간격을 동일하게</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make horizontal gaps between objects equal to the value specified</source>
<translation type="obsolete">객체 사이 수평 간격을 정한 값으로 동일하게</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="135"/>
<source>Distribute right sides equidistantly</source>
<translation>오른쪽 면에 등거리 배치</translation>
<translation>오른쪽 면에 등거리로 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="137"/>
<source>Distribute bottoms equidistantly</source>
<translation>아래에 등거리 배치</translation>
<translation>하단에 등거리로 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="139"/>
<source>Distribute centers equidistantly horizontally</source>
<translation>수평으로 중앙 등거리 배치</translation>
<translation>수평 등거리 중앙에 배치</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make vertical gaps between objects equal</source>
<translation type="obsolete">객체 사이 수직 간격을 동일하게</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make vertical gaps between objects equal to the value specified</source>
<translation type="obsolete">객체 사이 수직 간격을 정한 값으로 동일하게</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="145"/>
<source>Distribute left sides equidistantly</source>
<translation>왼쪽 면에 등거리 배치</translation>
<translation>왼쪽면 등거리 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="147"/>
<source>Distribute centers equidistantly vertically</source>
<translation>수직으로 중앙 등거리 배치</translation>
<translation>수직 등거리 중앙 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="149"/>
<source>Distribute tops equidistantly</source>
<translation>위에서 등거리 배치</translation>
<translation>상단 등거리 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="159"/>
4351,107 → 4084,102
<message>
<location filename="../../scribus/aligndistribute.cpp" line="160"/>
<source>Distribute the items with the distance specified</source>
<translation>객체를 지정거리로 배치</translation>
<translation>지정 거리에 객체 배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="162"/>
<source>None Selected</source>
<translation>없음</translation>
<translation>선택없음</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Warning</source>
<translation type="obsolete">오류</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Some objects are locked.</source>
<translation type="obsolete">몇 객체가 잠금.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Unlock All</source>
<translation type="obsolete">전체 잠금 해제(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="440"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
<translation>Y위치: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="448"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
<translation>X위치: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="107"/>
<source>Align right sides of items to left side of anchor</source>
<translation>객체의 오른쪽면을 고정점의 왼쪽면으로 정렬</translation>
<translation>객체 오른쪽면을 조절점 왼쪽면으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="109"/>
<source>Align left sides of items to right side of anchor</source>
<translation>객체 왼쪽면을 고정점의 오른쪽으로 정렬</translation>
<translation>객체 왼쪽 면을 조절점 오른쪽 면으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="115"/>
<source>Align tops of items to bottom of anchor</source>
<translation>객체의 위를 고정점 아래에 정렬</translation>
<translation>객체 상단을 조절점 하단으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="123"/>
<source>Align bottoms of items to top of anchor</source>
<translation>객체 아래를 고정점 상부에 정렬</translation>
<translation>객체 하단을 조절점 상단에 정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="130"/>
<source>Make horizontal gaps between items equal</source>
<translation>객체 사이 수평 간격을 주어진 값과 같게 만듦</translation>
<translation>객체 사이 수평 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="132"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>객체 사이 수평 간격을 지정 값과 같게 만듦</translation>
<translation>객체 사이 수평 간격을 지정 값으로 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="141"/>
<source>Make vertical gaps between items equal</source>
<translation>객체 사이 수직 간격을 지정 값으로 만듦</translation>
<translation>객체 사이 수직 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="143"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>객체 사이 수직 간격을 정해진 값으로 만듦</translation>
<translation>객체 사이 수직 간격을 지정 값으로 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="151"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>객체과 페이지면 사이에 수평 간격이 같게</translation>
<translation>객체와 페이지 면 사이 수평 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="157"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>객체과 페이지의 아래 윗쪽 사이 수직 간격이 같게</translation>
<translation>객체와 페이지 여백의 상단과 하단 사이 수직 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="155"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>객체와 페이지면의 간격사이의 수평여백이 같게</translation>
<translation>객체와 페이지 여백 면 사이 수평 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>객체와 페이지의 아래윗쪽 사이 수직 간격이 같게</translation>
<translation>객체와 페이지 하단 사이 수평 간격을 동일하게 생성</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation>정렬</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation>배치</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="103"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;관련 정렬:&lt;ul&gt;&lt;li&gt;처음 선택된 객체&lt;/li&gt;&lt;li&gt;둘째 선택된 객체&lt;/li&gt;&lt;li&gt;현재 페이지&lt;/li&gt;&lt;li&gt;현재 페이지의 여백&lt;/li&gt;&lt;li&gt;안내선&lt;/li&gt;&lt;li&gt;선택&lt;/ul&gt;&lt;/qt&gt;</translation>
<translation>&lt;qt&gt;비례 정렬:&lt;ul&gt;&lt;li&gt;처음 선택된 객체&lt;/li&gt;&lt;li&gt;둘째 선택된 객체&lt;/li&gt;&lt;li&gt;현재 페이지&lt;/li&gt;&lt;li&gt;현재 페이지의 여백&lt;/li&gt;&lt;li&gt;안내선&lt;/li&gt;&lt;li&gt;선택&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="105"/>
<source>The location of the selected guide to align to</source>
<translation>정렬하기 위한 선택 안내선의 위치</translation>
<translation>정렬할 선택된 안내선 위치</translation>
</message>
</context>
<context>
4459,27 → 4187,27
<message>
<location filename="../../scribus/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>텍스트 왼쪽 정렬</translation>
<translation>문자열 왼쪽으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>텍스트 오른쪽 정렬</translation>
<translation>문자열 오른쪽 정렬</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>텍스트 중앙 정렬</translation>
<translation>문자열 중앙으로 정렬</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>텍스트 양쪽 맞춤</translation>
<translation>문자열 양쪽 배분 정렬</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>텍스트 강제 양쪽 맞춤</translation>
<translation>문자열 강제 양쪽 배분 정렬</translation>
</message>
</context>
<context>
4492,7 → 4220,7
<message>
<location filename="../../scribus/annot.cpp" line="533"/>
<source>Type:</source>
<translation>형태:</translation>
<translation>타입:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
4502,7 → 4230,7
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Text Field</source>
<translation>텍스트 필드</translation>
<translation>문자열 필드</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
4530,14 → 4258,19
<translation>이름:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation>도구 도움말:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="274"/>
<source>Text</source>
<translation>텍스트</translation>
<translation>문자열</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="152"/>
<source>Font for use with PDF 1.3:</source>
<translation>PDF 1.3 사용하기 위한 글꼴:</translation>
<translation>PDF 1.3 용 글꼴:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="176"/>
4550,11 → 4283,6
<translation>색상:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2104"/>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="197"/>
<source>Width:</source>
<translation>너비:</translation>
4567,7 → 4295,7
<message>
<location filename="../../scribus/annot.cpp" line="311"/>
<source>Normal</source>
<translation>보통</translation>
<translation>일반</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
4577,7 → 4305,7
<message>
<location filename="../../scribus/annot.cpp" line="209"/>
<source>Style:</source>
<translation>형태:</translation>
<translation>스타일:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
4587,7 → 4315,7
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Dashed</source>
<translation>파선</translation>
<translation>점선</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
4597,12 → 4325,12
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Beveled</source>
<translation>빗금</translation>
<translation>경사</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Inset</source>
<translation>삽입</translation>
<translation>삽입(inset)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="224"/>
4612,14 → 4340,19
<message>
<location filename="../../scribus/annot.cpp" line="230"/>
<source>Read Only</source>
<translation>읽기만</translation>
<translation>읽기전용</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="236"/>
<source>Required</source>
<translation>필수</translation>
<translation>필요함</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation>값을 내보낼 수 없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="248"/>
<source>Visibility:</source>
<translation>가시성:</translation>
4637,7 → 4370,7
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>No Print</source>
<translation>인쇄 안함</translation>
<translation>인쇄 안됨</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="253"/>
4647,17 → 4380,17
<message>
<location filename="../../scribus/annot.cpp" line="262"/>
<source>Appearance</source>
<translation>외형</translation>
<translation>외양</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="280"/>
<source>Text for Button Down</source>
<translation>단추 누르기 텍스트</translation>
<translation>단추 아래있을 때 문자열</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="283"/>
<source>Text for Roll Over</source>
<translation>말아올리기 텍스트</translation>
<translation>머물 때 문자열</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="294"/>
4682,7 → 4415,7
<message>
<location filename="../../scribus/annot.cpp" line="347"/>
<source>Roll Over</source>
<translation>말아 올리기</translation>
<translation>머물음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="366"/>
4696,6 → 4429,12
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>None</source>
<comment>highlight</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Invert</source>
<translation>반전</translation>
</message>
4707,7 → 4446,7
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Push</source>
<translation>밀기</translation>
<translation>누름(Push)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="438"/>
4720,6 → 4459,11
<translation>암호</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<source>Limit of</source>
<translation>한계</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="460"/>
<source>Characters</source>
<translation>문자</translation>
4732,7 → 4476,7
<message>
<location filename="../../scribus/annot.cpp" line="470"/>
<source>Do Not Spell Check</source>
<translation>맞춤법 체크 안함</translation>
<translation>철자 검사 안함</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="485"/>
4752,7 → 4496,7
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Diamond</source>
<translation>다이아몬드</translation>
<translation>마름모</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
4767,9 → 4511,14
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Square</source>
<translation>사각</translation>
<translation>사각형</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<source>Default is Checked</source>
<translation>기본은 체크됨</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="514"/>
<source>Editable</source>
<translation>편집가능</translation>
4780,6 → 4529,12
<translation>설정</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>None</source>
<comment>action</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2105"/>
<source>JavaScript</source>
<translation>자바스크립트</translation>
4792,17 → 4547,17
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Submit Form</source>
<translation>전송 양식</translation>
<translation>폼 보내기</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Reset Form</source>
<translation>양식 초기화</translation>
<translation>폼 초기화</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Import Data</source>
<translation>자료 들여오기</translation>
<translation>자료 읽어오기</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="570"/>
4832,17 → 4587,17
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Focus</source>
<translation>초점</translation>
<translation>포커스</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Blur</source>
<translation>흐림</translation>
<translation>블러</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="585"/>
<source>Script:</source>
<translation>자바스크립트:</translation>
<translation>스크립트:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1111"/>
4852,32 → 4607,27
<message>
<location filename="../../scribus/annot.cpp" line="670"/>
<source>Submit to URL:</source>
<translation>다음 URL로 전송:</translation>
<translation>URL로 보내기:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Submit Data as HTML</source>
<translation type="obsolete">자료를 HTML로 보내기</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="707"/>
<source>Import Data from:</source>
<translation>자료 들여오기:</translation>
<translation>자료 읽어오기:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="610"/>
<source>Destination</source>
<translation>출력대상</translation>
<translation>대상</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="616"/>
<source>To File:</source>
<translation>파일로:</translation>
<translation>파일:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="623"/>
<source>Change...</source>
<translation>바꾸기...</translation>
<translation>변경...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="632"/>
4912,7 → 4662,7
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Plain</source>
<translation>보통</translation>
<translation>플레인</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
4947,7 → 4697,7
<message>
<location filename="../../scribus/annot.cpp" line="836"/>
<source>Decimals:</source>
<translation>십진법:</translation>
<translation>소수점:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="791"/>
4957,7 → 4707,7
<message>
<location filename="../../scribus/annot.cpp" line="800"/>
<source>Prepend Currency Symbol</source>
<translation>통화 기호 이전에 추가</translation>
<translation>앞 통화기호</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="847"/>
4992,7 → 4742,7
<message>
<location filename="../../scribus/annot.cpp" line="956"/>
<source>Keystroke:</source>
<translation>키입력:</translation>
<translation>키스트로크:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="980"/>
5007,32 → 4757,32
<message>
<location filename="../../scribus/annot.cpp" line="1005"/>
<source>Value must be greater than or equal to:</source>
<translation>값이 크거나 같아야 합니다:</translation>
<translation>값은 같거나 또는 보다 커야 합니다:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1009"/>
<source>and less or equal to:</source>
<translation>값이 적거나 같아야 합니다:</translation>
<translation>적거나 또는 같음:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1020"/>
<source>Custom validate script:</source>
<translation>사용자 인증 스크립트:</translation>
<translation>사용자 유효한 스크립트:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1041"/>
<source>Validate</source>
<translation>인증</translation>
<translation>유효</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1058"/>
<source>Value is not calculated</source>
<translation>값이 계산되지 않습니다</translation>
<translation>값을 계산할 수 없습니다</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1067"/>
<source>Value is the</source>
<translation>값</translation>
<translation>값은</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
5042,7 → 4792,7
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>product</source>
<translation>곱</translation>
<translation>행렬곱</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
5052,12 → 4802,12
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>minimum</source>
<translation>최소</translation>
<translation>최소값</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1073"/>
<source>maximum</source>
<translation>최대</translation>
<translation>최대값</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1080"/>
5067,7 → 4817,7
<message>
<location filename="../../scribus/annot.cpp" line="1090"/>
<source>Pick...</source>
<translation>추출...</translation>
<translation>선택하기...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1095"/>
5092,17 → 4842,17
<message>
<location filename="../../scribus/annot.cpp" line="1190"/>
<source>Flag is ignored for PDF 1.3</source>
<translation>플래그를 PDF 1.3에서 무시합니다</translation>
<translation>PDF 1.3에서 플래그를 무시합니다</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1191"/>
<source>Enter a comma separated list of fields here</source>
<translation>여기에 쉼표로 구분된 필드의 목록을 입력하시오.</translation>
<translation>여기에서 필드의 분리 목록에 콤마를 입력합니다</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1192"/>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>버튼에 아이콘을 사용하려면 일반 아이콘이 적어도 필요합니다</translation>
<translation>단추 아이콘을 사용하기 위하여 최소한 일반 아이콘이 필요합니다</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
5120,43 → 4870,16
<translation>선택 변경</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2104"/>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDF 파일 (*.pdf);;전체 파일 (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>None</source>
<comment>highlight</comment>
<translation>강조</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<source>Limit of</source>
<translation>제한</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<source>Default is Checked</source>
<translation>기본값이 체크됨</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>None</source>
<comment>action</comment>
<translation>작업</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation>도구설명:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation>내보내기 값이 없음</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1358"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>이미지 (*.tif *.png *.jpg *.xpm);;포스트스크립트 (*.eps *.epsi);;전체 파일 (*)</translation>
5169,32 → 4892,32
<message>
<location filename="../../scribus/annot.cpp" line="625"/>
<source>Export absolute Filename</source>
<translation>전체 파일 이름 내보내기</translation>
<translation>절대 파일명을 내보내기</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="682"/>
<source>Submit format:</source>
<translation type="unfinished"></translation>
<translation>형식 내보내기:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>FDF</source>
<translation type="unfinished"></translation>
<translation>FDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>HTML</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>XFDF</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>PDF</source>
<translation type="unfinished"></translation>
<translation></translation>
</message>
</context>
<context>
5207,7 → 4930,7
<message>
<location filename="../../scribus/annota.cpp" line="77"/>
<source>Text</source>
<translation>텍스트</translation>
<translation>문자열</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="78"/>
5222,7 → 4945,7
<message>
<location filename="../../scribus/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>외부 웹-링크</translation>
<translation>외부 웹 링크</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="82"/>
5232,7 → 4955,7
<message>
<location filename="../../scribus/annota.cpp" line="118"/>
<source>Destination</source>
<translation>출력방향</translation>
<translation>대상</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="129"/>
5252,17 → 4975,17
<message>
<location filename="../../scribus/annota.cpp" line="171"/>
<source>&amp;X-Pos</source>
<translation>&amp;X위치</translation>
<translation>X 위치(&amp;X)</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="179"/>
<source>&amp;Y-Pos:</source>
<translation>&amp;Y위치:</translation>
<translation>Y 위치(&amp;Y):</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>Open</source>
<translation>열기<byte value="x9"/></translation>
<translation>열기</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
5272,7 → 4995,7
<message>
<location filename="../../scribus/annota.cpp" line="131"/>
<source>Export absolute Filename</source>
<translation>전체 파일명 내보내기</translation>
<translation>절대 파일명 내보내기</translation>
</message>
</context>
<context>
5288,79 → 5011,34
<translation>마스터 페이지(&amp;M):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Apply To</source>
<translation type="obsolete">적용 대상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Current &amp;page</source>
<translation type="obsolete">현재 페이지(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
<translation></translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Even pages</source>
<translation type="obsolete">짝수 페이지(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd Pages</source>
<translation>홀수 페이지(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply to</source>
<translation>적용</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;All pages</source>
<translation type="obsolete">전체 페이지(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within Range</source>
<translation>범위내(&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>선택한 마스터 페이지를 다음 범위 내의 짝수, 홀수, 전체 페이지에 적용합니다</translation>
<translation>다음 범위내의 선택된 마스터 페이지를 홀수, 짝수 또는 전체 페이지에 적용</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
5368,32 → 5046,49
<translation>로</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation>이용가능한 하이픈</translation>
<translation>가능한 하이픈</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply to</source>
<translation>적용</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;Page</source>
<translation type="unfinished"></translation>
<translation>현재 페이지(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even Pages</source>
<translation type="unfinished">짝수 페이지(&amp;E)</translation>
<translation>짝수 페이지(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd Pages</source>
<translation>홀수 페이지(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All Pages</source>
<translation type="unfinished">전체 페이지(&amp;A)</translation>
<translation>전체 페이지(&amp;A)</translation>
</message>
</context>
<context>
<name>ArrowChooser</name>
<message>
<location filename="" line="0"/>
<source>None</source>
<translation type="obsolete">없음</translation>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within Range</source>
<translation>범위 내(&amp;W)</translation>
</message>
</context>
<context>
5401,27 → 5096,27
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
<source>Spell-checking support</source>
<translation>맞춤법 검사 지원</translation>
<translation>철자 검사 지원</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>aspell을 통하여 맞춤법 검사 지원을 더합니다. 언어를 설치된 aspell 사전 중에서 선택할 수 있습니다 , 그리고 즉시 또는 선택한 텍스트상에서 맞춤법 검사를 수행할 수 있습니다 .</translation>
<translation>Aspell을 통하여 철자 검사 지원 더하기, 언어는 설치된 Aspell 사전에서 선택할 수 있습니다, 그리고 즉시 또는 선택한 문자열에서 철자 검사를 수행할 수 있습니다 .</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<source>0.1</source>
<translation>0.1</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
<source>Spell Checker</source>
<translation>맞춤법 검사기</translation>
<translation>철자 검사기</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
<source>Aspell Plugin Error</source>
<translation type="unfinished"></translation>
<translation>Aspell 플러그인 오류</translation>
</message>
</context>
<context>
5429,31 → 5124,14
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<source>Spell Check</source>
<translation>맞춤법 검사</translation>
<translation>철자 검사</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Mis-spelling:</source>
<translation type="obsolete">오류-단어:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
<source>Replacement:</source>
<translation>치환:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Active dictionary: </source>
<translation type="obsolete">활성 사전: </translation>
</message>
<message>
<location filename="" line="0"/>
<source>Personal
Dictionary</source>
<translation type="obsolete">개인
<byte value="x9"/> 사전</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
<source>&amp;Add Word</source>
<translation>단어 더하기(&amp;A)</translation>
5464,94 → 5142,74
<translation>변경(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;hange All</source>
<translation type="obsolete">전체 변경(&amp;H)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Skip</source>
<translation type="obsolete">건너뛰기(&amp;S)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>S&amp;kip All</source>
<translation type="obsolete">전체 건너뛰기(&amp;K)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Exit</source>
<translation type="obsolete">종료(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
<source>Not in Dictionary:</source>
<translation type="unfinished"></translation>
<translation>사전에 없는 단어:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
<source>Word that was not found in the active dictionary</source>
<translation type="unfinished"></translation>
<translation>사용되는 사전에서 발견되지 않는 단어</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation type="unfinished"></translation>
<translation>사전에서 찾을 수 없는 현재 단어의 문자열 치환</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
<source>Active Dictionary: </source>
<translation type="unfinished"></translation>
<translation>사용되는 사전:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
<source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation type="unfinished"></translation>
<translation>현재 사용되는 사전. Scribus는 사전 지원에 Aspell을 사용합니다.&lt;br /&gt;사전에 대한 업데이트가 필요시, 시스템 설치 시스템 또는 페키지 관리자를 통하여 설치할 수 있습니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
<source>Ignore the current text not found in the active dictionary</source>
<translation type="unfinished"></translation>
<translation>사용되는 사전에서 찾을 수 없는 현재 문자열 무시합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
<source>&amp;Ignore</source>
<translation type="unfinished">무시(&amp;I)</translation>
<translation>무시(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation type="unfinished"></translation>
<translation>사용되는 사전에서 찾을 수 없는 현재 문자열의 전체 발견을 무시합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
<source>I&amp;gnore All</source>
<translation type="unfinished"></translation>
<translation>전체 무시(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation type="unfinished"></translation>
<translation>앞으로 사용하기 위하여 현재 단어를 개인 철자 사전에 더합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation type="unfinished"></translation>
<translation>발견되지 안흔 현재 단어를 치환 입력 필드에서 나타나는 단어로 변경합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation type="unfinished"></translation>
<translation>찾을 수 없는 문자열에서 현재 단어의 전체 발견을 치환 입력 문항에서 나타나는 단어로 변경합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
<source>Change A&amp;ll</source>
<translation type="unfinished"></translation>
<translation>전체 변경(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
<source>Close</source>
<translation type="unfinished">닫기</translation>
<translation>닫기</translation>
</message>
</context>
<context>
5559,7 → 5217,7
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source>Loaded </source>
<translation>읽어오기</translation>
<translation>읽어옴</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
5569,67 → 5227,52
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source> aspell dictionary.</source>
<translation> aspell 사전.</translation>
<translation>Aspell 사전.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="84"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 설정 오류.</translation>
<translation>Aspell플러그인 (AspellPluginImpl::AspellPluginImpl): Aspell 철자 설정에서 오류.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="91"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 생성시 오류.</translation>
<translation>Aspell플러그인 (AspellPluginImpl::AspellPluginImpl): Aspell 철자 생성 중 오류.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Spell-Checker</source>
<translation type="obsolete">맞춤법 검사기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Spell-checking completed.</source>
<translation type="obsolete">맞춤법 검사 완료.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Spell-checking done.</source>
<translation type="obsolete">맞춤법 검사 종료</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="359"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): 전체 경우를 생략할 수 없음 &quot;</translation>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): 전체 경우를 건너뛰기 할 수 없음 &quot;</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
<source> by adding it to the session list.</source>
<translation>세션 목록으로 더하기</translation>
<translation>그것을 세션 목록에 더하기함으로서.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="382"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): 단어를 개인 목록에 더할 수 없음</translation>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): 단어를 개인목록에 더할 수 없음.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="62"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="235"/>
<source>Spelling check complete</source>
<translation type="unfinished"></translation>
<translation>철자 검사 완료</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="427"/>
<source>Spell Checker</source>
<translation type="unfinished">맞춤법 검사기</translation>
<translation>철자 검사기</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="62"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation>이용가능한 Aspell 사전을 찾을 수 없습니다. 설치하여 주세요.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="429"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation type="unfinished"></translation>
<translation>선택된 새 언어의 선택 시작에서 시작할까요?</translation>
</message>
</context>
<context>
5642,7 → 5285,7
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
<source>Flow Chart</source>
<translation>플로우 차트</translation>
<translation>흐름도</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
5652,22 → 5295,17
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
<source>Specials</source>
<translation>기타</translation>
<translation>특수기호</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
<source>Default Shapes</source>
<translation>기본 도형</translation>
<translation>기본 모형</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<location filename="" line="0"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">순수한 Postscript 바코드 작성자를 위한 Scribus 프런트 엔드</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<source>&amp;Barcode...</source>
<translation>바코드(&amp;B)...</translation>
5675,90 → 5313,90
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation type="unfinished"></translation>
<translation>순수 포스트스크립트 바코드 작성기를 위한 Scribus 프론트엔드</translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<source>Error opening file: %1</source>
<translation>열기 파일 오류: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation>12 또는 13 디지트</translation>
<translation>12 또는 13 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation>8 디지트</translation>
<translation>8 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation>11 또는 12 디지트</translation>
<translation>11 또는 12 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation>7 또는 8 디지트</translation>
<translation>7 또는 8 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation>5 디지트</translation>
<translation>5 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation>2 디지트</translation>
<translation>2 자리</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>다양한 문자, 숫자, 그리고 임의 심볼 -. *$/+%.</translation>
<translation>다양한 문자, 자릿수와 임의 심볼 -. *$/+%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation>다양한 ASCII 문자와 적당한 시작문자로 시작하는 특별 함수 기호 초기 문자집합 UCC/EAN 128은 의무적으로 FNC 1 기호를 가져야한다.</translation>
<translation>ASCII 문자 변수와 특수 함수 심볼, 최초 문자 세트를 위해서 적당한 시작 문자로 시작 중. UCC/EAN-128s는, 즉시 시작 문자 다음에 의무적인 FNC 1 심볼을 가져야합니다. </translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>다양한 숫자와 임의 기호 -. *$/+%.</translation>
<translation>다양한 자릿수와 임의 심볼 -$:/.+ABCD.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation>다양한 숫자</translation>
<translation>자릿수</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation>다양한 숫자. ITF-14 는 14문자이어야 하며 체크 디지트를 가지지 않는다.</translation>
<translation>자릿수. ITF-14는 14문자이며 check digit를 가지지 않습니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation>다양한 숫자와 대문자</translation>
<translation>자릿수와 대문자</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation>다양한 16진수</translation>
<translation>16진수 변수</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<source>Error opening file: %1</source>
<translation>파일 여는 중 오류: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
<source>Barcode incomplete</source>
<translation>바코드 불완전</translation>
<translation>바코드 완료되지 않음</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation>대시있는 12 또는 13 디지트,레가시 ISBN-10형식은 대시있는 9 또는 10 디지트를 허용</translation>
<translation>실선 가진 12 또는 13 자리. 레가시 ISBN-10 형식은 실선가진 9,10 자릿수를 허용한다, 그러나 이 표준은 2007년 1월 1일 이후 일반의 사용을 위해서 공표되었습니다.(주의 : 이전 ISBN-10을 새로운 ISBN-13로 접두사 978-를 처음 9자리수를 변환하기 위하여, 예를 들면 1-56592-479-7 -&gt; 978-1-56592-479. 마지막 check digit를 자동으로 계산될 것입니다.)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
5786,12 → 5424,12
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
<source>Select one of the available barcode type here</source>
<translation>이용가능한 바코드 형태 중 하나를 선택합니다</translation>
<translation>이 곳에서 이용가능한 바코드 형태의 하나를 선택</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>코드 자체를 나타내는 숫자. 다음 도움말 메시지를 참조하십시오.</translation>
<translation>코드 자체의 수치 표현. 도움말 메세지가 아래에 보입니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
5799,59 → 5437,44
<translation>바코드 샘플 초기화</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">바코드에 텍스트 포함(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
<source>Alt+I</source>
<translation>Alt+I</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation>체크시 바코드에 숫자를 입력합니다</translation>
<translation>체크시 바코드에서 수치가 될 것입니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
<source>Draw arrows to be sure of space next the code</source>
<translation>다음 코드의 간격을 확인하기 위하여 화살표를 그립니다</translation>
<translation>코드 다음 공백을 확인하기 위하여 화살표 그리기 </translation>
</message>
<message>
<location filename="" line="0"/>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">체크섬 포함(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
<source>Alt+N</source>
<translation>Alt+N</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
<source>Generate and include a checksum in barcode</source>
<translation>바코드에서 체크섬의 생성 및 포함</translation>
<translation>바코드에서 체크섬 생성 및 포함합니다</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">체크섬 디지트 포함(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
<source>Include the checksum digit in the barcode text</source>
<translation>바코드 텍스트에서 체크섬 디지트 포함</translation>
<translation>바코드 문자열에서 체크점 자리를 포함합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
5866,57 → 5489,57
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
<source>Alt+B</source>
<translation>Alt+B</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
<source>Background color - under the code lines</source>
<translation>배경 색상 - 코드 선 하에서</translation>
<translation>배경 색상 - 코드막대 아래</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
<source>&amp;Lines</source>
<translation>선(&amp;L)</translation>
<translation>바코드 막대(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
<source>Color of the lines in barcode</source>
<translation>바코드에서 선 색상</translation>
<translation>바코드 막대 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
<source>&amp;Text</source>
<translation>텍스트(&amp;T)</translation>
<translation>문자열(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
<source>Color of the text and numbers</source>
<translation>텍스트와 숫자 색상</translation>
<translation>문자열과 수치 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
<source>Hints and help is shown here</source>
<translation>여기에 힌트와 도움말이 보입니다</translation>
<translation>이 곳에 힌트와 도움말이 보입니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
<source>Preview of the result. 72dpi sample.</source>
<translation>출력 미리보기. 72dpi 샘플</translation>
<translation>결과 미리보기, 72dpi 샘플.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<source>Insert Barcode</source>
<translation>바코드 입력</translation>
<translation>바코드 삽입</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
5926,7 → 5549,7
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
<source>Incl&amp;ude Checksum Digit</source>
<translation>체크섬 디지트 포함(&amp;U)</translation>
<translation>체크섬 자리 포함(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
5941,12 → 5564,37
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
<source>&amp;Include Text in Barcode</source>
<translation>바코드 문자열 포함(&amp;I)</translation>
<translation>바코드에서 문자열 포함(&amp;I)</translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation>메인</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation>복사된 객체</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation>스크랩북 사전 선택</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation>스크랩북 파일을 읽어오기 위하여 선택</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation>사전 선택</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
<source>Rename</source>
<translation>다른 이름으로</translation>
5957,23 → 5605,16
<translation>삭제</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<source>Scrapbook</source>
<translation>스크랩북</translation>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation>복사:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>이름 &quot;%1&quot;이 이미 있습니다.
다른 이름을 선택하시오.</translation>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation>이동:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<source>Object</source>
<translation>객체</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
5981,22 → 5622,24
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>New Entry</source>
<translation>새 객체</translation>
<translation>새 엔트리</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation>스크랩북 사전 선택</translation>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>이름 &quot;%1&quot; 이 이미 있습니다.
다른 이름을 선택하세요.</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation>들여오기 위하여 스크랩북 파일 선택</translation>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<source>Object</source>
<translation>객체</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation>사전 선택</translation>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<source>Scrapbook</source>
<translation>스크랩북</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
6006,7 → 5649,7
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
<source>Load an existing scrapbook</source>
<translation>기존 스크랩북 읽어오기</translation>
<translation>기본 스크랩북 읽어오기</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
6016,7 → 5659,7
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Scribus 1.3.2로 부터 스크랩북 파일을 들여오기</translation>
<translation>Scribus 에서 스크랩북 파일 읽어오기 &lt;=1.3.2</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
6024,29 → 5667,9
<translation>선택된 스크랩북 닫기</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation>복사:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation>이동:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation>메인</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation>복사된 객체</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
<source>New Name</source>
<translation>새 이름:</translation>
<translation>새 이름</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
6076,38 → 5699,15
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
<source>Do you really want to delete all entries?</source>
<translation>정말 전체 객체를 삭제하시겠습니까?</translation>
<translation>정말 전체 엔트리를 삭제하겠습니까?</translation>
</message>
</context>
<context>
<name>BookMView</name>
<message>
<location filename="" line="0"/>
<source>Move Bookmark</source>
<translation type="obsolete">북마크 이동</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Insert Bookmark</source>
<translation type="obsolete">북마크 삽입</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Cancel</source>
<translation type="obsolete">취소</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Bookmarks</source>
<translation type="obsolete">북마크</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
<source>Bookmarks</source>
<translation>북마크</translation>
<translation>책갈피</translation>
</message>
</context>
<context>
6115,17 → 5715,17
<message>
<location filename="../../scribus/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>아이콘 위치이동</translation>
<translation>아이콘 위치</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>배치:</translation>
<translation>윤곽:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>자막만</translation>
<translation>제목만</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
6135,27 → 5735,32
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>아이콘 아래 자막</translation>
<translation>아이콘 아래 제목</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>아이콘 위 자막</translation>
<translation>아이콘 위 제목</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>아이콘 오른쪽 자막</translation>
<translation>아이콘 오른쪽 제목</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>아이콘 왼쪽 자막</translation>
<translation>아이콘 왼쪽 제목</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>아이콘과 제목 겹침</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>비율:</translation>
<translation>크기:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
6175,12 → 5780,12
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>결코 없음</translation>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>비율 크기:</translation>
<translation>크기 조정 방법:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="66"/>
6212,11 → 5817,6
<source>Reset</source>
<translation>초기화</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>아이콘과 자막 겹침</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
6246,7 → 5846,7
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="19"/>
<source>Form</source>
<translation>양식</translation>
<translation>폼</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="40"/>
6266,7 → 5866,7
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="90"/>
<source>Default color profile for imported RGB images</source>
<translation>들여오는 RGB 이미지를 위한 기본 색상 프로파일</translation>
<translation>읽어온 RGB 이미지를 위한 기본 색상 프로파일</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="97"/>
6276,7 → 5876,7
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="113"/>
<source>Default color profile for imported CMYK images</source>
<translation>들여오는 CMYK 이미지를 위한 기본 색상 프로파일</translation>
<translation>읽어온 CMYK 이미지 기본 색상 프로파일</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="120"/>
6286,17 → 5886,17
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="136"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation>페이지상에서 단색 RGB 색상의 기본 색상 프로파일</translation>
<translation>페이지에서 단일 RGB 색상을 위한 기본 색상 프로파일</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="143"/>
<source>&amp;CMYK Solid Colors:</source>
<translation>CMY 단일색(&amp;C):</translation>
<translation>CMYK 단일 색상(&amp;C):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="159"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>페이지상에서 단일색 CMYK 색상의 기본 색상 프로파일</translation>
<translation>페이지에서 단일 CMYK 색상을 위한 기본 색상 프로파일</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="166"/>
6307,8 → 5907,8
<location filename="../../scribus/cmsprefsbase.ui" line="182"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>자신이 만든 또는 제조 업체에서받은 색상 프로필.
이 프로필은 모니터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
<translation>생성 또는 제조업자로부터 받은 색상 프로파일
이 프로 파일은 당신의 모니터용으로 지정되어야 하며 일반 프로파일이 아닙니다.(즉 sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="190"/>
6319,13 → 5919,13
<location filename="../../scribus/cmsprefsbase.ui" line="206"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>제조 업체에서 발행되는 프린터 모델에 맞는 색상 프로필.
이 프로필은 프린터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
<translation>제조사의 프린터 모델 색상 프로파일.
이 프로파일은 당신의 프린터용에 지정되어야 하며 일반 프로파일이 아닙니다.(즉, sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="220"/>
<source>Rendering Intents</source>
<translation>렌더링 목적</translation>
<translation>렌더링용</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="244"/>
6336,8 → 5936,8
<location filename="../../scribus/cmsprefsbase.ui" line="260"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>이미지를 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우,
상대적인 색상계 또는 지각을 선택하시오.</translation>
<translation>이미지를 위한 기본 렌더링용, 변경하는 이유를 알지 못한다면,
상대 색상계나 또는 지각을 선택합니다.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="268"/>
6348,50 → 5948,51
<location filename="../../scribus/cmsprefsbase.ui" line="284"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>단일 색상을 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우,
상대적인 색채계 또는 지각을 선택하시오.</translation>
<translation>단색의 기본 렌더링용. 이것을 변경하는 이유를 모르면,
상대 색상계 또는 지각을 선택합니다.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="298"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation>선택한 프린터 프로필을 기반으로, 문서 색상을 어떻게 인쇄하는가는 &apos;soft - proofing&apos;를 사용.</translation>
<translation>선택된 프린터 프로파일에 기반하여,
문서 색상이 어떻게 출력되는지 간단히 알 수 있음.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="302"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>화면상 프린터 시뮬레이션(&amp;U)</translation>
<translation>화면에서 프린터 시뮬레이트(&amp; U)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="329"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation>전체 색상 관리 환경 시뮬레이션 :
rgb 또는 cmyk 전체 색상을 프린터 색상 공간으로 변환합니다.</translation>
<translation>환경을 관리하는 전체 색상 시뮬레이트:
전체 색상, RGB 또는 CMYK를 프린터 색상 공간으로 변환.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="333"/>
<source>Convert all colors to printer space</source>
<translation>전체 색상을 프린터 색상공간으로 변환</translation>
<translation>전체 색상을 프린터 공백으로 변환</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="340"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>적절히 출력되지 않는 화면상에서 색상을 나타내는 방법.
이것은 매우 정확한 프로파일이 필요하고 단지 경고를 합니다.</translation>
<translation>적절히 출력되지 않는 색상을 화면상에서 나타내는 방법
이것은 정확한 프로파일이 필요하며, 경고로서만 나타납니다.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="344"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>범위 밖 생상 표시(&amp;G)</translation>
<translation>범위 밖 색상 표시(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="357"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>흑점 보정은 사진 명암을 개선하는 방법입니다.
문서 중 사진이 있는 경우, 이것의 사용을 추천합니다.</translation>
<translation>흑점 보정은 사진에서 대비를 개선시키는 방법입니다.
문서에서 사진 자료가 있다면 이것을 사용할 것을 추천합니다.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="361"/>
6419,22 → 6020,22
<message>
<location filename="../../scribus/cmykfw.cpp" line="906"/>
<source>CMYK</source>
<translation>CMYK</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="911"/>
<source>RGB</source>
<translation>RGB</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="764"/>
<source>Web Safe RGB</source>
<translation>Web Safe RGB</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="125"/>
<source>Is Spot Color</source>
<translation>Spot 색상</translation>
<translation>지정색상(스폿 색상)</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="141"/>
6447,11 → 6048,6
<translation>이전 색</translation>
</message>
<message>
<location filename="" line="0"/>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-색상도</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="705"/>
<source>C:</source>
<translation>C(남색):</translation>
6459,7 → 6055,7
<message>
<location filename="../../scribus/cmykfw.cpp" line="704"/>
<source> %</source>
<translation> %</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="706"/>
6477,6 → 6073,11
<translation>K(검은색):</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation>이것을 선택하는 것은 이 색상을 지정 색상으로 만들며, 평판 생성이나 분리할 때 다른 지정 색상을 생성시킵니다. 이것은 로고 또는 다른 색상을 정확하게 나타낼 때 자주 사용되며, 그렇지 않으면 CMYK 잉크로 복사될 수 없습니다. 메탈릭 또는 형광 잉크는 CMYK 잉크로 쉽게 복사할 수 없는 좋은 예입니다.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="444"/>
<source>Dynamic Color Bars</source>
<translation>동적 색상 막대</translation>
6505,68 → 6106,72
<location filename="../../scribus/cmykfw.cpp" line="1002"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>&quot;%1&quot;라는 색상을 생성할 수 없습니다.
투명 색상명으로 예약되었습니다.</translation>
<translation>%1라는 색상을 생성할 수 없습니다.
투명 색상을 위한 이름으로 지정되어있습니다</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1011"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation>색상 이름이 이미 있습니다,
다른 이름을 선택하시오.</translation>
<translation>색상명이 이미 있습니다.
다른 이름을 선택하세요.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation> 이것을 선택하는 것은 이 색상을 spot 색상으로 만들며, 평판이나 분리를 생성시킬 때 다른 spot을 생성시킵니다. 이것은 로고 또는 다른 색상을 정확하게 나타낼 때 자주 사용되며, 즉 CMYK 잉크로 복사될 수 없습니다. 메탈릭 또는 형광 잉크는 CMYK 잉크로 쉽게 복사할 수 없는 좋은 예입니다.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="785"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>색상관리를 할 수 있다면, 삼각형 경고 표시는 색상이 현재 선택된 프린터 프로파일의 색상범위 밖에 있다는 경고입니다. 이 의미는 화면상에서 보이는 것을 정확하게 색상을 출력할 수 없음을 의미합니다. 온라인 도움말 색상관리 부분에서 경고에 대한 더 많은 정보를 얻을 수 있습니다.</translation>
<translation>색상관리가 가능하다면, 삼각형 경고 지시자는 색상이 현재 선택된 프린터 프로파일의 색상범위 밖에 있다는 경고입니다. 이 의미는 화면상에서 보이는 것을 정확하게 색상을 출력할 수 없음을 의미합니다. 온라인 도움말 색상 관리 부분에서 경고에 대한 더 많은 정보를 얻을 수 있습니다.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="995"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>이름이 없이 색상을 생성할 수 없습니다
<byte value="x9"/> 이름을 부여하시오</translation>
<translation>이름 없는 색상을 생성할 수 없습니다.
이름을 부여하시오</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="196"/>
<source>HSV Color Map</source>
<translation type="unfinished"></translation>
<translation>HSV 색상도</translation>
</message>
</context>
<context>
<name>CStyleP</name>
<name>CWDialog</name>
<message>
<location filename="../smcstylew.ui" line="13"/>
<source>Form1</source>
<translation type="obsolete">양식1</translation>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation>색상 병합 중</translation>
</message>
<message>
<location filename="../smcstylew.ui" line="49"/>
<source>Based On:</source>
<translation type="obsolete">근거:</translation>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation>오류:</translation>
</message>
<message>
<location filename="../smcstylew.ui" line="109"/>
<source>Colors</source>
<translation type="obsolete">색상</translation>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation>색상 %1이 이미 있습니다!</translation>
</message>
</context>
<context>
<name>CStylePBase</name>
<message>
<location filename="" line="0"/>
<source>Colors</source>
<translation type="obsolete">색상</translation>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<source>Color %1 appended.</source>
<translation>색상 %1 부가합니다.</translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<source>Now opening the color manager.</source>
<translation>지금 색상 관리자를 여는 중.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<source>Color Merging</source>
<translation>색상 병합 중</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>요청 색상을 찾을 수 없습니다. 아마 선택된 검은색, 회색 또는 흰색을 가질 것 입니다. 이 색상을 진행시킬 방법이 없습니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<source>Color Wheel</source>
<translation>색상 판</translation>
6574,37 → 6179,37
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>기본 색상을 얻기 위해 색상 판을 클릭합니다. 색상 모델은 선택된 탭에 의존합니다.</translation>
<translation>기본 색상을 얻기 위하여 색상판을 클릭. 색상 모델은 선택 탭에 의존합니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
<source>Result Colors</source>
<translation>출력 색상</translation>
<translation>결과 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
<source>CMYK</source>
<translation>CMYK</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
<source>RGB</source>
<translation>RGB</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
<source>HSV</source>
<translation>HSV</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
<source>Colors of your chosen color scheme.</source>
<translation>선택한 색상 체계의 색상</translation>
<translation>선택된 색상 스킴 색상.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
<source>Color Scheme Method</source>
<translation>색상 체계 방법</translation>
<translation>색상 스킴 방법</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
6614,17 → 6219,17
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>선택한 값과 다른 것 사이의 차이. 자세한 내용은 문서를 참조하십시오.</translation>
<translation>선택된 값과 계산된 값 사이 차이. 더 많은 정보를 얻기 위하여 문서 참조하세요.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>색상 체계를 생성하는 방법을 선택. 자세한 정보는 문서를 참조하시오.</translation>
<translation>색상 스킴을 생성하기 위하여 방법 중 하나를 선택합니다. 더 많은 정보를 얻기 위하여 문서를 참조하세요.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
<source>Merge created colors into the document colors</source>
<translation>생성된 색상을 문서 색상으로 병합</translation>
<translation>생성된 색상을 문서 색상으로 병합합니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
6634,12 → 6239,12
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
<source>Alt+M</source>
<translation>Alt+M</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
<source>Replace created colors in the document colors</source>
<translation>문서 색상에서 생성 색깔을 치환</translation>
<translation>문서색상에서 생성된 색상 치환</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
6649,12 → 6254,12
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
<source>Alt+R</source>
<translation>Alt+R</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
<source>Leave colors untouched</source>
<translation>손대지 않은 색상을 남겨둠</translation>
<translation>색상을 건드리지 않고 둡니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
6664,7 → 6269,7
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
6674,12 → 6279,12
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
<source>Sample color scheme.</source>
<translation>예제 색상 체계.</translation>
<translation>예제 색상 스킴.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>일반 시력결손을 시험함. 시력 결손 형태를 선택하시오.</translation>
<translation>여기서 일반 색맹을 모의실험을 할 수 있습니다. 색맹 결손 형태를 선택하세요.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
6694,7 → 6299,7
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
<source> %</source>
<translation> %</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
6714,12 → 6319,12
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
<source>RGB:</source>
<translation>RGB:</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
<source>HSV:</source>
<translation>HSV:</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
6739,7 → 6344,7
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
<source>CMYK:</source>
<translation>CMYK:</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
6754,7 → 6359,7
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
<source>V:</source>
<translation>V(명암):</translation>
<translation>V(명도):</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
6761,188 → 6366,25
<source>Document</source>
<translation>문서</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation type="unfinished">색상 병합 중</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation type="unfinished">오류: </translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation type="unfinished">색상 %1이 이미 있습니다!</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<source>Color %1 appended.</source>
<translation type="unfinished">상 %1을 첨가합니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<source>Now opening the color manager.</source>
<translation type="unfinished">색상 관리자 여는 중</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<source>Color Merging</source>
<translation type="unfinished">색상 병합</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation type="unfinished">요청받은 색상을 찾을 수 없습니다. 검정, 회색 또는 흰색을 선택하여야 합니다. 이 색상에 처리할 방법이 없습니다.</translation>
</message>
</context>
<context>
<name>CWDialogBase</name>
<message>
<location filename="" line="0"/>
<source>Color Wheel</source>
<translation type="obsolete">색상판</translation>
</message>
<message>
<location filename="" line="0"/>
<source>CMYK</source>
<translation type="obsolete">CMYK</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C:</source>
<translation type="obsolete">C(남색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>M:</source>
<translation type="obsolete">M(자홍색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Y:</source>
<translation type="obsolete">Y(노란색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>K:</source>
<translation type="obsolete">K(검은색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>RGB:</source>
<translation type="obsolete">RGB:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>RGB</source>
<translation type="obsolete">RGB</translation>
</message>
<message>
<location filename="" line="0"/>
<source>R:</source>
<translation type="obsolete">R(적색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>G:</source>
<translation type="obsolete">G(녹색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>B:</source>
<translation type="obsolete">B(청색):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>CMYK:</source>
<translation type="obsolete">CMYK:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Document</source>
<translation type="obsolete">문서</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="obsolete">색상 스킴을 생성하기 위하여 방법을 선택합니다. 더 자세한 정보는 문서를 참조하세요</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Angle:</source>
<translation type="obsolete">각도:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="obsolete">선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Preview:</source>
<translation type="obsolete">미리보기:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Vision Defect Type:</source>
<translation type="obsolete">색맹 형태:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Merge created colors into the document colors</source>
<translation type="obsolete">생성된 색상을 문서색상로 병합</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Replace created colors in the document colors</source>
<translation type="obsolete">생성된 색상을 문서 색상로 치환</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Cancel</source>
<translation type="obsolete">취소(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Leave colors untouched</source>
<translation type="obsolete">손대지 않은 색상을 남겨둠.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="obsolete">여기에서 일반적인 색맹형태를 모의시험합니다. 색맹 형태를 선택하시오.</translation>
</message>
<message>
<location filename="" line="0"/>
<source> %</source>
<translation type="obsolete"> %</translation>
</message>
</context>
<context>
<name>Canvas</name>
<message>
<location filename="../../scribus/canvas.cpp" line="2243"/>
<source>X: %1
Y: %2</source>
<translation>X: %1
Y: %2</translation>
<translation>X값: %1
Y값: %2</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2228"/>
<source>X: %1</source>
<translation>X: %1</translation>
<translation>X값: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2235"/>
<source>Y: %1</source>
<translation>Y: %1</translation>
<translation>Y값: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2251"/>
6964,17 → 6406,17
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="167"/>
<source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
<translation type="unfinished">선택된 색상이 문서 색상표에서 없습니다. 새 색상을 위한 이름을 넣어주세요.</translation>
<translation>선택된 색상이 문서 색상 모음에서 없습니다. 이 새 색상의 이름을 입력하세요.</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="170"/>
<source>Color Not Found</source>
<translation type="unfinished">색상 찾지 못함</translation>
<translation>색상을 찾을 수 없습니다</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="174"/>
<source>The name you have selected already exists. Please enter a different name for this new color.</source>
<translation type="unfinished">선택된 이름이 이미 있습니다. 새로운 색상을 위한 다른 이름을 입력하세요.。</translation>
<translation>선택된 이름이 이미 있습니다. 이 새 색상을 위한 다른 이름을 입력하세요.</translation>
</message>
</context>
<context>
6982,7 → 6424,7
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1331"/>
<source>All Supported Formats</source>
<translation>전체 지원 형식</translation>
<translation>전체 지원하는 형식</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1362"/>
6991,116 → 6433,57
</message>
</context>
<context>
<name>ChTable</name>
<message>
<location filename="" line="0"/>
<source>You can see a thumbnail if you press
and hold down the right mouse button
 
The Insert key inserts a Glyph into the Selection below
and the Delete key removes the last inserted one</source>
<translation type="obsolete">오른쪽 마우스 버튼을 누르고 있으면 썸네일을 볼 수 있습니다.
<byte value="x9"/>
삽입키는 사용자문자를 아래 선택으로 삽입하고 삭제키는 마지막 삽입된 것을 제거합니다.</translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<location filename="" line="0"/>
<source>Font:</source>
<translation type="obsolete">글꼴:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Character Class:</source>
<translation type="obsolete">문자 종류:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Insert</source>
<translation type="obsolete">삽입(&amp;I)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;lear</source>
<translation type="obsolete">제거(&amp;L)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Insert the characters at the cursor in the text</source>
<translation type="obsolete">텍스트에서 커서위치에 문자를 입력</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Delete the current selection(s).</source>
<translation type="obsolete">현재 선택을 삭제합니다.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">오른쪽 마우스 버튼을 계속 누르고 있으면 썸네일을 볼 수 있습니다. 삽입키는 사용자 문자표를 선택된 곳 아래에 삽입하며 삭제키는 마지막 삽입된 그림문자를 삭제합니다.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Enhanced Palette</source>
<translation type="obsolete">사용자 문자표</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Quick Palette</source>
<translation type="obsolete">문자 빨리 찾기</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="13"/>
<source>Character Palette</source>
<translation>문자 팔레트</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="24"/>
<source>Hide/Show Enhanced Palette</source>
<translation>사용자 문자표 숨기기/보이기</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="31"/>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation type="unfinished"></translation>
<translation>Scribus 문자 팔레트 (*.ucp);;전체 파일 (*)</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="226"/>
<source>Choose a filename to open</source>
<translation type="unfinished"></translation>
<translation>열기위한 파일명 선택</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="297"/>
<source>Error</source>
<translation type="unfinished">오류</translation>
<translation>오류</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="256"/>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation type="unfinished"></translation>
<translation>파일 %1을 읽는 중 오류 - 파일이 아마 깨졌을 것입니다.</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="272"/>
<source>Save Quick Character Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="298"/>
<source>Cannot write file %1</source>
<translation type="unfinished"></translation>
<translation>파일 %1을 쓸 수 없음</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="13"/>
<source>Character Palette</source>
<translation>문자 팔레트</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="306"/>
<source>Empty the Palette?</source>
<translation type="unfinished"></translation>
<translation>팔레트가 비었습니까?</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="307"/>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation type="unfinished"></translation>
<translation>정말 이 팔레트의 전체 문자를 삭제하겠습니까?</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="24"/>
<source>Hide/Show Enhanced Palette</source>
<translation>고급 팔레트 숨기기/보이기</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="272"/>
<source>Save Quick Character Palette</source>
<translation>빠른 문자 팔레트 저장</translation>
</message>
</context>
<context>
<name>CharSelectEnhanced</name>
7107,199 → 6490,200
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="205"/>
<source>Full Character Set</source>
<translation type="unfinished"></translation>
<translation>전체 문자 모음</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="210"/>
<source>Basic Latin</source>
<translation type="unfinished"></translation>
<translation>기본 라틴어</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="216"/>
<source>Latin-1 Supplement</source>
<translation type="unfinished"></translation>
<translation>라틴-1 부가</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="222"/>
<source>Latin Extended-A</source>
<translation type="unfinished"></translation>
<translation>라틴 확장-A</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="228"/>
<source>Latin Extended-B</source>
<translation type="unfinished"></translation>
<translation>라틴 확장-B</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="234"/>
<source>General Punctuation</source>
<translation type="unfinished"></translation>
<translation>일반 구두점</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="240"/>
<source>Super- and Subscripts</source>
<translation type="unfinished"></translation>
<translation>윗첨자와 아래첨자</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="246"/>
<source>Currency Symbols</source>
<translation type="unfinished"></translation>
<translation>통화기호</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="252"/>
<source>Letterlike Symbols</source>
<translation type="unfinished"></translation>
<translation>글자모양 기호</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="258"/>
<source>Number Forms</source>
<translation type="unfinished"></translation>
<translation>숫자 폼</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="264"/>
<source>Arrows</source>
<translation type="unfinished">화살표</translation>
<translation>화살</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="270"/>
<source>Mathematical Operators</source>
<translation type="unfinished"></translation>
<translation>수학 연산자</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="276"/>
<source>Box Drawing</source>
<translation type="unfinished"></translation>
<translation>상자 그림</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="282"/>
<source>Block Elements</source>
<translation type="unfinished"></translation>
<translation>블럭 요소</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="288"/>
<source>Geometric Shapes</source>
<translation type="unfinished"></translation>
<translation>기하학적 모양</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="294"/>
<source>Miscellaneous Symbols</source>
<translation type="unfinished"></translation>
<translation>다양한 기호</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="300"/>
<source>Dingbats</source>
<translation type="unfinished"></translation>
<translation>딩뱃</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="306"/>
<source>Small Form Variants</source>
<translation type="unfinished"></translation>
<translation>특수 기호1</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="312"/>
<source>Ligatures</source>
<translation type="unfinished"></translation>
<translation>글자 겹침</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="318"/>
<source>Specials</source>
<translation type="unfinished">기타</translation>
<translation>특수 기호2</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="324"/>
<source>Greek</source>
<translation type="unfinished">그리스어</translation>
<translation>그리스어</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="330"/>
<source>Greek Extended</source>
<translation type="unfinished"></translation>
<translation>그리스어 확장</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="336"/>
<source>Cyrillic</source>
<translation type="unfinished"></translation>
<translation>키릴어</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="342"/>
<source>Cyrillic Supplement</source>
<translation type="unfinished"></translation>
<translation>키릴 추가</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="348"/>
<source>Arabic</source>
<translation type="unfinished">아라비아어</translation>
<translation>아라비아어</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="354"/>
<source>Arabic Extended A</source>
<translation type="unfinished"></translation>
<translation>아라비아 확장 A</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="360"/>
<source>Arabic Extended B</source>
<translation type="unfinished"></translation>
<translation>아라비아 확장 B</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="366"/>
<source>Hebrew</source>
<translation type="unfinished">헤브루어</translation>
<translation>유대어</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="13"/>
<source>Enhanced Character Palette</source>
<translation type="unfinished"></translation>
<translation>고급 문자 팔레트</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="19"/>
<source>&amp;Font:</source>
<translation type="unfinished"></translation>
<translation>글꼴(&amp;F):</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="45"/>
<source>C&amp;haracter Class:</source>
<translation type="unfinished"></translation>
<translation>문자 클래스(&amp;H):</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="77"/>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished"></translation>
<translation>오른쪽 마우스를 누르고 두면 작은 글자를 볼 수 있습니다.
Insert키는 사용자 정의문자를 선택으로 삽입합니다. Del키는 마지막 삽입된 문자를 제거합니다</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="96"/>
<source>Insert &amp;Code:</source>
<translation type="unfinished"></translation>
<translation>코드 삽입(&amp;C):</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="106"/>
<source>Type in a four digit Unicode value directly here</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="131"/>
<source>Glyphs to Insert</source>
<translation type="unfinished"></translation>
<translation>삽입할 사용자 정의문자</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="171"/>
<source>Insert the characters at the cursor in the text</source>
<translation type="unfinished">텍스트에서 커서위치에 문자를 입력</translation>
<translation>문자열에서 커서위치에 문자 삽입</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="174"/>
<source>&amp;Insert</source>
<translation type="unfinished">삽입(&amp;I)</translation>
<translation>삽입(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="184"/>
<source>Delete the current selection(s).</source>
<translation type="unfinished">현재 선택을 삭제합니다.</translation>
<translation>현재 선택 제거.</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="187"/>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
<translation>지우기(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="106"/>
<source>Type in a four digit Unicode value directly here</source>
<translation>여기에 직접 4 자리 유니코드 값을 입력합니다</translation>
</message>
</context>
<context>
<name>CharStyleComboBox</name>
7310,14 → 6694,6
</message>
</context>
<context>
<name>CharTable</name>
<message>
<location filename="" line="0"/>
<source>Delete</source>
<translation type="obsolete">삭제</translation>
</message>
</context>
<context>
<name>CharTableView</name>
<message>
<location filename="../../scribus/chartableview.cpp" line="22"/>
7328,51 → 6704,36
<context>
<name>CheckDocument</name>
<message>
<location filename="../../scribus/checkDocument.cpp" line="660"/>
<source>Glyphs missing</source>
<translation>사용자 문자표 빠짐</translation>
<location filename="../../scribus/checkDocument.cpp" line="379"/>
<source>Document</source>
<translation>문서</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="661"/>
<source>Text overflow</source>
<translation>텍스트 오버플로우</translation>
<location filename="../../scribus/checkDocument.cpp" line="381"/>
<source>No Problems found</source>
<translation>프로그램을 찾을 수 없음</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="662"/>
<source>Object is not on a Page</source>
<translation>객체가 페이지에 없음</translation>
<location filename="../../scribus/checkDocument.cpp" line="382"/>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="663"/>
<source>Missing Image</source>
<translation>이미지 빠짐</translation>
<location filename="../../scribus/checkDocument.cpp" line="412"/>
<source>Transparency used</source>
<translation>사용된 투명도</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="667"/>
<source>Object has transparency</source>
<translation>객체가 투명도를 가짐</translation>
<location filename="../../scribus/checkDocument.cpp" line="415"/>
<source>Blendmode used</source>
<translation>사용된 혼합모드</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="668"/>
<source>Object is a PDF Annotation or Field</source>
<translation>객체가 PDF 주석이나 필드임</translation>
<location filename="../../scribus/checkDocument.cpp" line="422"/>
<source>Layer &quot;%1&quot;</source>
<translation>레이어 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="669"/>
<source>Object is a placed PDF</source>
<translation>객체가 배치된 PDF입니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="379"/>
<source>Document</source>
<translation>문서</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="381"/>
<source>No Problems found</source>
<translation>문제가 없습니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="548"/>
<source>Page </source>
<translation>페이지 </translation>
7383,9 → 6744,9
<translation>자유 객체</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Problems found</source>
<translation type="obsolete">문제가 발견되었습니다</translation>
<location filename="../../scribus/checkDocument.cpp" line="653"/>
<source>&amp;Ignore Errors</source>
<translation>오류 무시(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="645"/>
7400,7 → 6761,7
<message>
<location filename="../../scribus/checkDocument.cpp" line="648"/>
<source>Problems</source>
<translation>문제</translation>
<translation>플그램</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="652"/>
7408,69 → 6769,69
<translation>현재 프로파일:</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="653"/>
<source>&amp;Ignore Errors</source>
<translation>오류 무시(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="654"/>
<source>Check again</source>
<translation>다시 체크</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">이미지 해상도가 1 % DPI 미만, 현재 2 % x % 3 DPI입니다.</translation>
<location filename="../../scribus/checkDocument.cpp" line="660"/>
<source>Glyphs missing</source>
<translation>사용자 문자표 빠짐</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">이미지 해상도가 1 % DPI 이상, 현재 2 % x % 3 DPI입니다.</translation>
<location filename="../../scribus/checkDocument.cpp" line="661"/>
<source>Text overflow</source>
<translation>문자열 오버플로우</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="670"/>
<source>Image is GIF</source>
<translation>GIF 이미지 입니다</translation>
<location filename="../../scribus/checkDocument.cpp" line="662"/>
<source>Object is not on a Page</source>
<translation>객체가 페이지상에 없습니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="382"/>
<source>OK</source>
<translation>확인</translation>
<location filename="../../scribus/checkDocument.cpp" line="663"/>
<source>Missing Image</source>
<translation>빠진 이미지</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="412"/>
<source>Transparency used</source>
<translation>투명도 사용 중</translation>
<location filename="../../scribus/checkDocument.cpp" line="667"/>
<source>Object has transparency</source>
<translation>객체가 투명도를 가졌습니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="415"/>
<source>Blendmode used</source>
<translation>혼합모드 사용 중</translation>
<location filename="../../scribus/checkDocument.cpp" line="668"/>
<source>Object is a PDF Annotation or Field</source>
<translation>객체가 PDF주석 또는 필드입니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="422"/>
<source>Layer &quot;%1&quot;</source>
<translation>레이어 &quot;%1&quot;</translation>
<location filename="../../scribus/checkDocument.cpp" line="669"/>
<source>Object is a placed PDF</source>
<translation>객체는 위치한 PDF입니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="670"/>
<source>Image is GIF</source>
<translation>이미지가 GIF입니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="671"/>
<source>Annotation uses a non TrueType font</source>
<translation>주석에서 TrueType 글꼴이 아닌 것이 사용합니다</translation>
<translation>주석이 비 TTF를 사용하였습니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="656"/>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation>문서 프로필을 기초로 보고서를 생성합니다. 옵션은 문서 설치나 기본설정을 설정할 수 있습니다</translation>
<translation>보고서 생성 기반 문서 검증 프로파일. 설정을 문서 설정 또는 기본 설정에서 설정할 수 있습니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="657"/>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation>오류 발견을 무시하고 내보내기 또는 출력을 계속합니다. 계속 하기 전 무시한 오류를 확인하시요.</translation>
<translation>오류 발견 무시 그리고 내보내기 또는 출력을 계속합니다.</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="658"/>
<source>Rerun the document scan to check corrections you may have made</source>
<translation>정정을 체그하기 이하여 문서 스캔을 재 실행합니다</translation>
<translation>문서 정정을 체크하기 위하여 문서 스캔을 다시 실행합니다</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="664"/>
7480,50 → 6841,39
<message>
<location filename="../../scribus/checkDocument.cpp" line="393"/>
<source>Layers</source>
<translation type="unfinished">레이어</translation>
<translation>레이어</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="493"/>
<source>Issue(s): %1</source>
<translation type="unfinished"></translation>
<translation>발행: %1</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="435"/>
<source>Master Pages</source>
<translation type="unfinished">마스터 페이지</translation>
<translation>마스터 페이지</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="648"/>
<source>Layer</source>
<translation type="unfinished">레이어</translation>
<translation>레이어</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="665"/>
<source>Image resolution below %1 DPI,
currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
<translation>%1 DPI 아래 이미지 해상도,
현재 %2 x %3 DPI</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="666"/>
<source>Image resolution above %1 DPI,
currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
<translation>%1 DPI 이상 이미지 해상도,
현재 %2 x %3 DPI</translation>
</message>
</context>
<context>
<name>ChooseStyles</name>
<message>
<location filename="../editformats.cpp" line="95"/>
<source>Choose Styles</source>
<translation type="obsolete">스타일 선택</translation>
</message>
<message>
<location filename="../editformats.cpp" line="100"/>
<source>Available Styles</source>
<translation type="obsolete">이용가능한 스타일</translation>
</message>
</context>
<context>
<name>CollectForOutput</name>
<message>
<location filename="../../scribus/collect4output.cpp" line="52"/>
7533,20 → 6883,20
<message>
<location filename="../../scribus/collect4output.cpp" line="68"/>
<source>Collecting...</source>
<translation>수집 중...</translation>
<translation>모으는 중...</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="87"/>
<source>Cannot collect the file:
<location filename="../../scribus/collect4output.cpp" line="73"/>
<source>Cannot collect all files for output for file:
%1</source>
<translation>파일을 수집할 수 없습니다:
<translation>파일 출력을 위한 전체 파일을 모을 수 없습니다:
%1</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="73"/>
<source>Cannot collect all files for output for file:
<location filename="../../scribus/collect4output.cpp" line="87"/>
<source>Cannot collect the file:
%1</source>
<translation>출력 파일로 전체 파일을 모을 수 없습니다:
<translation>파일을 모을 수 없습니다:
%1</translation>
</message>
</context>
7560,12 → 6910,12
<message>
<location filename="../../scribus/colorm.cpp" line="80"/>
<source>&amp;Import</source>
<translation>들여오기(&amp;I)</translation>
<translation>읽어오기(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="82"/>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
<translation>새로(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="84"/>
7585,47 → 6935,47
<message>
<location filename="../../scribus/colorm.cpp" line="96"/>
<source>&amp;Remove Unused</source>
<translation>사용하지 않는 것 삭제(&amp;R)</translation>
<translation>미사용된 것 제거(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="103"/>
<source>Color Sets</source>
<translation>색상 모음</translation>
<translation>색상 설정</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="109"/>
<source>Current Color Set:</source>
<translation>현재 색상 모음:</translation>
<translation>현재 색상 설정:</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="140"/>
<source>&amp;Save Color Set</source>
<translation>색상 모음 저장(&amp;S)</translation>
<translation>색상 설정 저장(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="159"/>
<source>Choose a color set to load</source>
<translation>읽어오는 색상 모음 선택</translation>
<translation>읽어오기 위한 색상 설정 선택</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="160"/>
<source>Save the current color set</source>
<translation>현재 색상 모음 저장</translation>
<translation>현재 색상 설정 저장</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="165"/>
<source>Remove unused colors from current document&apos;s color set</source>
<translation>현재 문서의 색상 모음에서 사용되지 않은 색상을 제거합니다</translation>
<translation>현재 문서 색상 설정에서 미사용된 색상 제거</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="167"/>
<source>Import colors to the current set from an existing document</source>
<translation>기존 문서에서 현재 색상 설정에 색상 들여오기</translation>
<translation>기존 문서에서 색상을 현재 설정으로 읽어오기</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="168"/>
<source>Create a new color within the current set</source>
<translation>현재 설정 사이에 새로운 색상을 생성합니다</translation>
<translation>현재 설정 내에서 새 색상 생성</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="169"/>
7635,17 → 6985,17
<message>
<location filename="../../scribus/colorm.cpp" line="170"/>
<source>Make a copy of the currently selected color</source>
<translation>현재 선택된 색상의 사본 생성</translation>
<translation>현재 선택된 색상의 복사</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="171"/>
<source>Delete the currently selected color</source>
<translation>현재 선택된 색상 삭제</translation>
<translation>현재 선택된 색상의 삭제</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="172"/>
<source>Make the current colorset the default color set</source>
<translation>현재 색상 모음을 기본 색상 모음으로 만듦니다</translation>
<translation>현재 색상설정을 기본색성 설정으로 만듦</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="190"/>
7655,7 → 7005,7
<message>
<location filename="../../scribus/colorm.cpp" line="190"/>
<source>Choose a Name</source>
<translation>새 이름 선택</translation>
<translation>이름 선택</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="353"/>
7673,11 → 7023,6
<translation>정보</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Import</source>
<translation type="obsolete">들여오기</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="321"/>
<source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import.
7684,26 → 7029,26
Not all files have DSC conformant comments where the color descriptions are located.
This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
<translation>% 1 파일을 가져올 수있는 색상을 포함하지 않습니다.
이 파일이 포스트 스크립트 기반이라면, 파일을 읽어오려고 할 것입니다 - &amp;&gt; 읽어오기.
모든 파일이 색상 설명이 위치한 DSC 준수 의견을 가지지 않습니다.
이것은 몇몇 파일로부터 색상을 읽어오는 것을 금지합니다.
더 자세한 내용은 문서 색상 섹션의 편집부분을 참조하십시오.</translation>
<translation>파일 %1은 읽어올 수 있는 색상을 포함하지 않습니다.
파일이 포스트스크립트 기반이라면,, 파일 -&amp;gt;읽어오기로 그것을 읽어오기를 시도합니다.
모든 파일이 색상 설명이 위치하는 DSC conformant 주석을 가지는 것은 아닙니다.
이것은 색상을 몇몇 파일에서 색상 읽어오기를 방해합니다.
자세한 것은 문서의 색상 펴집 부분을 참고하세요.</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="173"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
<translation>색상 관리가 활성화 된다면 삼각형의 경고 지시자는 현재 선택된 프린터의 색상 범위 밖을 의미하는 것입니다. 이는 색상이 화면상에서 나타나는 것과 같이 정확히 출력이 되지 않은 것입니다. Spot 색상이 적색원으로 나타납니다.범위 오류에 대한 더 자세한 내용은 색상 관리부분에서 온라인 도움말이 있습니다. 등록색상은 등록마크 옆에 있는 색상을 가질 것입니다. 프린터 마크와 잘림 마크를 위한 등록을 사용합니다.</translation>
<translation>색상관리가 가능하다면, 삼각형 경고 지시자는 색상이 선택된 현재 프린터 프로파일 생상 법위의 밖일 것입니다. 이 의미는 화면상에 보여질 때 정확하게 출력되지 않을 것입니다. 지정 색상(스폿색상)을 적색 원으로 나타냅니다. 색상 범위 경고에 대한 더 많은 자료는 색상 관리 온라인 도움말에 있습니다. 등록 색상은 색상 다음에 등록 표시를 가질 것입니다. 프린터 표시 또는 자름 표시에 대해서만 등록을 사용합니다.</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="311"/>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation>전체 지원 형식 (%1);;문서 (%2);;기타 파일 (%3);;전체 파일 (*)</translation>
<translation>전체 지원하는 형식 (%1);;문서 (%2);;다른 파일 (%3);;전체 파일 (*)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="312"/>
<source>Import Colors</source>
<translation type="unfinished"></translation>
<translation>색상 읽어오기</translation>
</message>
</context>
<context>
7756,303 → 7101,60
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="216"/>
<source>1st. Analogous</source>
<translation>첫째 유사색상</translation>
<translation>첫번째 유사색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="217"/>
<source>2nd. Analogous</source>
<translation>둘째 유사색상</translation>
<translation>두번째 유사색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="231"/>
<source>1st. Split</source>
<translation>첫째 분열 색상</translation>
<translation>첫번째 분열 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="232"/>
<source>2nd. Split</source>
<translation>둘째 분열 색상</translation>
<translation>두번째 분열 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="233"/>
<source>3rd. Split</source>
<translation>셋째 분열 색상</translation>
<translation>세번째 분열 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="234"/>
<source>4th. Split</source>
<translation>네째 분열 색상</translation>
<translation>네번째 분열 색상</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="241"/>
<source>1st. Triadic</source>
<translation>첫째 3색</translation>
<translation>첫번째 3색</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="242"/>
<source>2nd. Triadic</source>
<translation>둘째 3색</translation>
<translation>두번째 3색</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="249"/>
<source>1st. Tetradic (base opposite)</source>
<translation>첫째 3색 (기본 반대)</translation>
<translation>첫번째 3색 (기본 반대)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="250"/>
<source>2nd. Tetradic (angle)</source>
<translation>둘째 3색(각도)</translation>
<translation>두번째 3색 (각도)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="251"/>
<source>3rd. Tetradic (angle opposite)</source>
<translation>세째 3색(각도 반대)</translation>
<translation>세번째 3색 (각도 반대)</translation>
</message>
</context>
<context>
<name>ColorWheelDialog</name>
<message>
<location filename="" line="0"/>
<source>Cr&amp;eate color...</source>
<translation type="obsolete">색상 생성(&amp;E)...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Import existing color...</source>
<translation type="obsolete">기존 색상 들여오기(&amp;I)...</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Merge colors</source>
<translation type="obsolete">색상 병합(&amp;M)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Replace colors</source>
<translation type="obsolete">색상 치환(&amp;R)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>E&amp;xit</source>
<translation type="obsolete">종료(&amp;X)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;olor</source>
<translation type="obsolete">색상(&amp;O)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Normal Vision</source>
<translation type="obsolete">정상 시력</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Protanopia (red)</source>
<translation type="obsolete">색맹 (적)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Deuteranopia (green)</source>
<translation type="obsolete">색맹 (녹)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Tritanopia (blue)</source>
<translation type="obsolete">색맹 (청)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Full Color Blindness</source>
<translation type="obsolete">완전 색맹</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Vision Defect:</source>
<translation type="obsolete">색맹:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Saturation:</source>
<translation type="obsolete">채도:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Value:</source>
<translation type="obsolete">명암:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color Wheel</source>
<translation type="obsolete">색상판</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color</source>
<translation type="obsolete">색상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Name</source>
<translation type="obsolete">이름</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C</source>
<translation type="obsolete">C(남색)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>M</source>
<translation type="obsolete">M(자홍색)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Y</source>
<translation type="obsolete">Y(노랑색)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>K</source>
<translation type="obsolete">K(검은색)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Select Method:</source>
<translation type="obsolete">선택 방법:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Angle (0 - 90 degrees):</source>
<translation type="obsolete">각도 (0 -90 도):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Merge Colors</source>
<translation type="obsolete">색상 병합(&amp;M)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Replace Colors</source>
<translation type="obsolete">색상 치환(&amp;R)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Merge created colors into the document colors</source>
<translation type="obsolete">생성된 색상을 문서 색상으로 병합</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Replace created colors in the document colors</source>
<translation type="obsolete">문서 색상을 생성 색상으로 치환</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Leave colors untouched</source>
<translation type="obsolete">손대지 않은 색상을 남겨둠</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="obsolete">선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Saturation component in HSV mode</source>
<translation type="obsolete">HSV 모드에서 채도 요소</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Value component in HSV mode</source>
<translation type="obsolete">HSV 모드에서 명암요소</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Click the wheel to get the base color. It is hue in HSV mode.</source>
<translation type="obsolete">기본색상을 얻기 위해 색상판을 클릭. HSV모드에서 색조임</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Sample color scheme</source>
<translation type="obsolete">샘플 색상 스킴</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="obsolete">색상 스키카를 생성하기 위하여 방법을 선택합니다. 더 자사한 정보는 문서를 참조하세요</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Colors of your chosen color scheme</source>
<translation type="obsolete">선택 색상 스킴 색상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="obsolete">여기에서 일반 색맹을 모의시험합니다. 색명 형태를 선택하세요..</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Merging colors</source>
<translation type="obsolete">색상 병합 중</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Error: </source>
<translation type="obsolete">오류: </translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color %1 exists already!</source>
<translation type="obsolete">색상 %1이 이미 있습니다!</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color %1 appended.</source>
<translation type="obsolete">상 %1을 첨가합니다.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Now opening the color manager.</source>
<translation type="obsolete">색상 관리자 여는 중</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color Merging</source>
<translation type="obsolete">색상 병합</translation>
</message>
<message>
<location filename="" line="0"/>
<source>New Color</source>
<translation type="obsolete">새 색상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation type="obsolete">요청받은 색상을 찾을 수 없습니다. 검정, 회색 또는 흰색을 선택하여야 합니다. 이 색상에 처리할 방법이 없습니다.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;olor Components...</source>
<translation type="obsolete">요소(&amp;O)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Protanopia (Red)</source>
<translation type="obsolete">색맹 (적)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Deuteranopia (Green)</source>
<translation type="obsolete">색맹 (녹)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Tritanopia (Blue)</source>
<translation type="obsolete">색맹 (청)</translation>
</message>
</context>
<context>
<name>ColorWheelPlugin</name>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="47"/>
8067,7 → 7169,7
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
<source>Color selector with color theory included.</source>
<translation>색상 이론을 포함하는 색상 선택기</translation>
<translation>색상 이론을 포함하는 색상 선택기.</translation>
</message>
</context>
<context>
8083,8 → 7185,9
<translation>취소(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="250"/>
<location filename="../../scribus/commonstrings.cpp" line="251"/>
<source>None</source>
<comment>color name</comment>
<translation>없음</translation>
</message>
<message>
8103,63 → 7206,52
<translation>경고</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="251"/>
<source>None</source>
<comment>color name</comment>
<translation>없음</translation>
<location filename="../../scribus/commonstrings.cpp" line="262"/>
<source>Yes</source>
<translation>예</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="263"/>
<source>No</source>
<translation>아니오</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="264"/>
<source>&amp;Yes</source>
<translation>예(&amp;Y)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="265"/>
<source>&amp;No</source>
<translation>아니오(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="285"/>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation>사용자 설정</translation>
<translation>사용자</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="291"/>
<source>Single Page</source>
<translation>한 쪽</translation>
<translation>한 면</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="292"/>
<source>Double Sided</source>
<translation>두 쪽</translation>
<translation>두 면</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="293"/>
<source>3-Fold</source>
<translation>세 쪽</translation>
<translation>세 면</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="294"/>
<source>4-Fold</source>
<translation>네 쪽</translation>
<translation>네 면</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Left Page</source>
<translation type="obsolete">왼쪽 페이지</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Middle</source>
<translation type="obsolete">중앙 페이지</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Middle Left</source>
<translation type="obsolete">중앙 왼쪽 페이지</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Middle Right</source>
<translation type="obsolete">중앙 오른쪽 페이지</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Right Page</source>
<translation type="obsolete">오른쪽 페이지</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="330"/>
<source>Monday</source>
<translation>월요일</translation>
8227,7 → 7319,7
<message>
<location filename="../../scribus/commonstrings.cpp" line="343"/>
<source>July</source>
<translation>6월</translation>
<translation>7월</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="344"/>
8255,26 → 7347,6
<translation>12월</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="262"/>
<source>Yes</source>
<translation>예</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="263"/>
<source>No</source>
<translation>아니오</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="264"/>
<source>&amp;Yes</source>
<translation>예(&amp;Y)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="265"/>
<source>&amp;No</source>
<translation>아니오(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="301"/>
<source>Left Page</source>
<comment>Left page location</comment>
8284,19 → 7356,19
<location filename="../../scribus/commonstrings.cpp" line="302"/>
<source>Middle</source>
<comment>Middle page location</comment>
<translation>중앙 페이지</translation>
<translation>중간</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="303"/>
<source>Middle Left</source>
<comment>Middle Left page location</comment>
<translation>중앙 왼쪽 페이지</translation>
<translation>중간 왼쪽 </translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="304"/>
<source>Middle Right</source>
<comment>Middle Right page location</comment>
<translation>중앙 오른쪽 페이지</translation>
<translation>중간 오른쪽 </translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="305"/>
8308,63 → 7380,68
<location filename="../../scribus/commonstrings.cpp" line="308"/>
<source>Normal</source>
<comment>Default single master page</comment>
<translation>기본 단일 마스터 페이지</translation>
<translation>일반</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="310"/>
<source>Normal Left</source>
<comment>Default left master page</comment>
<translation>기본 왼쪽 마스터 페이지</translation>
<translation>일반 왼쪽</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="312"/>
<source>Normal Middle</source>
<comment>Default middle master page</comment>
<translation>기본 중앙 마스터 페이지</translation>
<translation>일반 중간</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="314"/>
<source>Normal Right</source>
<comment>Default right master page</comment>
<translation>기본 오른쪽 마스터 페이지</translation>
<translation>일반 오른쪽</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="356"/>
<source>Normal Vision</source>
<comment>Color Blindness - Normal Vision</comment>
<translation>정상 시력</translation>
<translation>일반 시각</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="357"/>
<source>Protanopia (Red)</source>
<comment>Color Blindness - Red Color Blind</comment>
<translation>적색 이상</translation>
<translation>색맹(적)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="358"/>
<source>Deuteranopia (Green)</source>
<comment>Color Blindness - Greed Color Blind</comment>
<translation>녹색 이상</translation>
<translation>색맹(녹)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="359"/>
<source>Tritanopia (Blue)</source>
<comment>Color Blindness - Blue Color Blind</comment>
<translation>청색 이상</translation>
<translation>색맹(청)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="360"/>
<source>Full Color Blindness</source>
<comment>Color Blindness - Full Color Blindness</comment>
<translation>전 색상 색맹</translation>
<translation>완전 색맹</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="362"/>
<source>Custom: </source>
<comment>Custom Tab Fill Option</comment>
<translation>사용자 탭 설정: </translation>
<translation>사용자:</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="250"/>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="316"/>
<source>Solid Line</source>
<translation>실선</translation>
8372,7 → 7449,7
<message>
<location filename="../../scribus/commonstrings.cpp" line="317"/>
<source>Dashed Line</source>
<translation>대시선</translation>
<translation>파선</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="318"/>
8382,12 → 7459,12
<message>
<location filename="../../scribus/commonstrings.cpp" line="319"/>
<source>Dash Dot Line</source>
<translation>대시점선</translation>
<translation>실점선</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="320"/>
<source>Dash Dot Dot Line</source>
<translation>대시점점선</translation>
<translation>실점점선</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="364"/>
8399,7 → 7476,8
<location filename="../../scribus/commonstrings.cpp" line="365"/>
<source>Left Protruding</source>
<comment>Optical Margin Setting</comment>
<translation>왼쪽 돌출</translation>
<translation>왼쪽 돌출
</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="366"/>
8411,13 → 7489,13
<location filename="../../scribus/commonstrings.cpp" line="367"/>
<source>Left Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation>왼쪽 문장 부호</translation>
<translation>왼쪽 매달린 구둣점</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="368"/>
<source>Right Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation>오른쪽 문장 부호</translation>
<translation>오른쪽 매달린 구두점</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="369"/>
8428,12 → 7506,12
<message>
<location filename="../../scribus/commonstrings.cpp" line="372"/>
<source>Min. Word Tracking</source>
<translation>최소 단어 찾기</translation>
<translation>최소 단어 추적</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="373"/>
<source>Max. Word Tracking</source>
<translation>최대 단어 찾기</translation>
<translation>최대 단어 추적</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="376"/>
8449,13 → 7527,13
<location filename="../../scribus/commonstrings.cpp" line="350"/>
<source>RGB</source>
<comment>Colorspace</comment>
<translation>RGB</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="351"/>
<source>CMYK</source>
<comment>Colorspace</comment>
<translation>CMYK</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="352"/>
8467,13 → 7545,13
<location filename="../../scribus/commonstrings.cpp" line="353"/>
<source>Duotone</source>
<comment>Colorspace</comment>
<translation>2색조</translation>
<translation>듀오톤</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="354"/>
<source>Unknown</source>
<comment>Colorspace (Unknown)</comment>
<translation>미정</translation>
<translation>알려지지 않음</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="381"/>
8483,7 → 7561,7
<message>
<location filename="../../scribus/commonstrings.cpp" line="267"/>
<source>Text Frame</source>
<translation>텍스트 프레임</translation>
<translation>문자열 프레임</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="268"/>
8503,28 → 7581,28
<message>
<location filename="../../scribus/commonstrings.cpp" line="271"/>
<source>Polyline</source>
<translation>다수 선</translation>
<translation>다각형</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="272"/>
<source>Text on a Path</source>
<translation>경로상 텍스트</translation>
<translation>경로상 문자열</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="274"/>
<source>Multiple</source>
<comment>Multiple frame types</comment>
<translation>다수 프레임 형태</translation>
<translation>복수</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="275"/>
<source>PDF Push Button</source>
<translation>PDF 밀기 단추</translation>
<translation>PDF 푸시 단추</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="276"/>
<source>PDF Text Field</source>
<translation>PDF 텍스트 필드</translation>
<translation>PDF 문자열 필드</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="277"/>
8544,7 → 7622,7
<message>
<location filename="../../scribus/commonstrings.cpp" line="280"/>
<source>PDF Text Annotation</source>
<translation>PDF 텍스트 주석</translation>
<translation>PDF 문자열 주석</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="281"/>
8569,7 → 7647,7
<message>
<location filename="../../scribus/commonstrings.cpp" line="394"/>
<source>Windows GDI</source>
<translation>Windows GDI</translation>
<translation>윈도우 GDI</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="273"/>
8612,7 → 7690,7
<message>
<location filename="../../scribus/contextmenu.cpp" line="182"/>
<source>Paste Image from Clipboard</source>
<translation type="unfinished"></translation>
<translation>클립보드에서 이미지 붙여넣기</translation>
</message>
</context>
<context>
8628,19 → 7706,9
<translation>이름:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;OK</source>
<translation type="obsolete">확인(&amp;O)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Cancel</source>
<translation type="obsolete">취소</translation>
</message>
<message>
<location filename="../../scribus/ui/copypagetomasterpage.ui" line="39"/>
<source>Copy Applied Master Page Items</source>
<translation>적용된 마스터 페이지 객체 복사</translation>
<translation>적용된 마스테 페이지 객체 복사</translation>
</message>
</context>
<context>
8654,6 → 7722,11
<context>
<name>Cpalette</name>
<message>
<location filename="../../scribus/cpalette.cpp" line="1017"/>
<source>Transparency Settings</source>
<translation>투명도 설정</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="984"/>
<source> pt</source>
<translation> 포인트</translation>
8661,9 → 7734,49
<message>
<location filename="../../scribus/cpalette.cpp" line="985"/>
<source> %</source>
<translation> 퍼센트</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="988"/>
<source>Offsets</source>
<translation>옵셋</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="989"/>
<source>X:</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="991"/>
<source>Y:</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="993"/>
<source>Scaling</source>
<translation>배율</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="994"/>
<source>X-Scale:</source>
<translation>X-배율:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="996"/>
<source>Y-Scale:</source>
<translation>Y-배율:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="998"/>
<source>Rotation</source>
<translation>회전</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="999"/>
<source>Angle</source>
<translation>각도</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1001"/>
<source>Shade:</source>
<translation>음영:</translation>
8676,12 → 7789,12
<message>
<location filename="../../scribus/cpalette.cpp" line="1003"/>
<source>Move Vector</source>
<translation>벡터 이동</translation>
<translation>이동 벡터</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1020"/>
<source>Normal</source>
<translation>보통</translation>
<translation>일반</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1008"/>
8701,7 → 7814,7
<message>
<location filename="../../scribus/cpalette.cpp" line="1011"/>
<source>Cross Diagonal Gradient</source>
<translation>교차 대각선 그라디언트</translation>
<translation>직교 대각선 그라디언트</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1012"/>
8711,7 → 7824,7
<message>
<location filename="../../scribus/cpalette.cpp" line="1013"/>
<source>Free linear Gradient</source>
<translation>자유 직선 그라디언트</translation>
<translation>자유 선형 그라디언트</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1014"/>
8719,41 → 7832,11
<translation>자유 방사 그라디언트</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1038"/>
<source>Edit Line Color Properties</source>
<translation>선 색상 속성 편집</translation>
<location filename="../../scribus/cpalette.cpp" line="1015"/>
<source>Pattern</source>
<translation>패턴</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1039"/>
<source>Edit Fill Color Properties</source>
<translation>채움 색상 속성 편집</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1040"/>
<source>Saturation of color</source>
<translation>색상 채도</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1041"/>
<source>Normal or gradient fill method</source>
<translation>보통 또는 그라디언트 채움 방법</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1042"/>
<source>Set the transparency for the color selected</source>
<translation>선택 색상의 투명도 설정</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1043"/>
<source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
<translation>왼쪽 마우스 버튼을 눌러 그라디언트 백터의 시작을 이동하고 오른쪽 마우스를 눌러 그라디언트 벡터의 끝으로 이동시킵니다.</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1017"/>
<source>Transparency Settings</source>
<translation>투명도 설정</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1018"/>
<source>Blend Mode:</source>
<translation>혼합 모드:</translation>
8761,17 → 7844,17
<message>
<location filename="../../scribus/cpalette.cpp" line="1021"/>
<source>Darken</source>
<translation>어둡게</translation>
<translation>어두움</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1022"/>
<source>Lighten</source>
<translation>밝게</translation>
<translation>밝음</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1023"/>
<source>Multiply</source>
<translation>곱셈</translation>
<translation>곱하기</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1024"/>
8781,17 → 7864,17
<message>
<location filename="../../scribus/cpalette.cpp" line="1025"/>
<source>Overlay</source>
<translation>중첩</translation>
<translation>오버레이</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1026"/>
<source>Hard Light</source>
<translation>아주 밝게</translation>
<translation>강한 빛 </translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1027"/>
<source>Soft Light</source>
<translation>중간 밝게</translation>
<translation>부드러운 빛</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1028"/>
8799,14 → 7882,19
<translation>차이</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1029"/>
<source>Exclusion</source>
<translation>제외</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1030"/>
<source>Color Dodge</source>
<translation>피하기</translation>
<translation>색상 피하기</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1031"/>
<source>Color Burn</source>
<translation>태우기</translation>
<translation>색상 태움</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1032"/>
8826,67 → 7914,47
<message>
<location filename="../../scribus/cpalette.cpp" line="1035"/>
<source>Luminosity</source>
<translation>광도</translation>
<translation>명도</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="988"/>
<source>Offsets</source>
<translation>옵셋</translation>
<location filename="../../scribus/cpalette.cpp" line="1038"/>
<source>Edit Line Color Properties</source>
<translation>선 색상 속성 편집</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="989"/>
<source>X:</source>
<translation>X:</translation>
<location filename="../../scribus/cpalette.cpp" line="1039"/>
<source>Edit Fill Color Properties</source>
<translation>채움 색상 속성 편집</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="991"/>
<source>Y:</source>
<translation>Y:</translation>
<location filename="../../scribus/cpalette.cpp" line="1040"/>
<source>Saturation of color</source>
<translation>색상의 채도</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="993"/>
<source>Scaling</source>
<translation>비율</translation>
<location filename="../../scribus/cpalette.cpp" line="1041"/>
<source>Normal or gradient fill method</source>
<translation>일반 또는 그라디언트 채움 방법</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="998"/>
<source>Rotation</source>
<translation>회전</translation>
<location filename="../../scribus/cpalette.cpp" line="1042"/>
<source>Set the transparency for the color selected</source>
<translation>선택된 색상의 투명도 설정</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="999"/>
<source>Angle</source>
<translation>각도</translation>
<location filename="../../scribus/cpalette.cpp" line="1043"/>
<source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
<translation>누른는 왼쪽 마우스 버튼으로 그라디언트 시작을 이동하고, 누른 오른쪽의 마우스 버튼으로 그라디언트 벡터의 끝으로 이동합니다</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1015"/>
<source>Pattern</source>
<translation>패턴</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1029"/>
<source>Exclusion</source>
<translation>제외</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="994"/>
<source>X-Scale:</source>
<translation>X비율:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="996"/>
<source>Y-Scale:</source>
<translation>Y비율:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1036"/>
<source>Display only used Colors</source>
<translation>사용된 색상만 표시</translation>
<translation>사용된 색상만 보이기</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1044"/>
<source>Display all colors from the document color list, or only the already used colors</source>
<translation>문서 색상 몱록에서 모든 색상 또는 현재 사용되는 색깔만 나타내기</translation>
<translation>문서 색상 목록에서 전체 색상 또는 이미 사용된 색상만 보이기</translation>
</message>
</context>
<context>
8894,12 → 7962,12
<message>
<location filename="../../scribus/ui/createrange.ui" line="13"/>
<source>Create Range</source>
<translation>범위 생성</translation>
<translation>구간 생성</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="54"/>
<source>Number of Pages in Document:</source>
<translation>문서 페이지 번호:</translation>
<translation>문서 페이지 갯수:</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="64"/>
8909,12 → 7977,12
<message>
<location filename="../../scribus/ui/createrange.ui" line="112"/>
<source>Basic Range Selection</source>
<translation>기본 범위 선택</translation>
<translation>기본 구간 선택</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="136"/>
<source>Range of Pages</source>
<translation>페이지 범위</translation>
<translation>페이지 구간</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="160"/>
8924,7 → 7992,7
<message>
<location filename="../../scribus/ui/createrange.ui" line="163"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="186"/>
8934,7 → 8002,7
<message>
<location filename="../../scribus/ui/createrange.ui" line="189"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="196"/>
8944,12 → 8012,12
<message>
<location filename="../../scribus/ui/createrange.ui" line="199"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="218"/>
<source>Add a Range of Pages</source>
<translation>페이지 범위 더하기</translation>
<translation>페이지 구간 더하기</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="242"/>
8957,29 → 8025,29
<translation>연속 페이지</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Even Pages</source>
<translation type="obsolete">짝수 페이지(&amp;E)</translation>
<location filename="../../scribus/ui/createrange.ui" line="252"/>
<source>Even Pages</source>
<translation>짝수 페이지</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="259"/>
<source>From:</source>
<translation>부터:</translation>
<translation>시작:</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="291"/>
<source>To:</source>
<translation>까지:</translation>
<translation>끝:</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="334"/>
<source>&amp;Add To Range</source>
<translation>범위에 더하기(&amp;A)</translation>
<translation>구간에 더하기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="337"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="362"/>
8989,12 → 8057,12
<message>
<location filename="../../scribus/ui/createrange.ui" line="372"/>
<source>Comma Separated List</source>
<translation>쉼표로 구분된 목록</translation>
<translation>콤마 분리 목록</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="383"/>
<source>Advanced Reordering</source>
<translation>자세한 정렬</translation>
<translation>고급 재정렬</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="439"/>
9004,7 → 8072,7
<message>
<location filename="../../scribus/ui/createrange.ui" line="449"/>
<source>Sample Page Order:</source>
<translation>샘플 페이지 순서:</translation>
<translation>예제 페이지 순서:</translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="478"/>
9019,7 → 8087,7
<message>
<location filename="../../scribus/ui/createrange.ui" line="528"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="535"/>
9029,83 → 8097,20
<message>
<location filename="../../scribus/ui/createrange.ui" line="538"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/createrange.ui" line="252"/>
<source>Even Pages</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CreateRangeBase</name>
<message>
<location filename="" line="0"/>
<source>Alt+U</source>
<translation type="obsolete">Alt+U</translation>
</message>
<message>
<location filename="" line="0"/>
<source>De&amp;lete</source>
<translation type="obsolete">삭제(&amp;L)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+L</source>
<translation type="obsolete">Alt+L</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Advanced Reordering</source>
<translation type="obsolete">부가 순서</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Page Group Size:</source>
<translation type="obsolete">페이지그룹 크기:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Sample Page Order:</source>
<translation type="obsolete">단순 페이지 순서:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Page Order</source>
<translation type="obsolete">페이지 순서</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;OK</source>
<translation type="obsolete">확인(&amp;O)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+O</source>
<translation type="obsolete">Alt+O</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Cancel</source>
<translation type="obsolete">취소(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
</context>
<context>
<name>CsvDialog</name>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="27"/>
<source>CSV Importer Options</source>
<translation>CSV 들여오기 설정</translation>
<translation>CSV 해석기 설정</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="37"/>
<source>Field delimiter:</source>
<translation>필드 구분자:</translation>
<translation>필드 분리자:</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="89"/>
9115,12 → 8120,18
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="53"/>
<source>Value delimiter:</source>
<translation>값 구분자:</translation>
<translation>값 분리자:</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
<source>None</source>
<comment>delimiter</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="68"/>
<source>First row is a header</source>
<translation>첫 번째 행이 헤더임</translation>
<translation>첫째 행이 머릿글임</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="76"/>
9132,12 → 8143,6
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
<source>None</source>
<comment>delimiter</comment>
<translation>없음</translation>
</message>
</context>
<context>
<name>CupsOptions</name>
9167,6 → 8172,11
<translation>홀수 페이지만</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="160"/>
<source>Mirror</source>
<translation>뒤집기</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="177"/>
<source>Orientation</source>
<translation>방향</translation>
9174,17 → 8184,17
<message>
<location filename="../../scribus/cupsoptions.cpp" line="181"/>
<source>Portrait</source>
<translation>세로방향</translation>
<translation>세로</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="175"/>
<source>Landscape</source>
<translation>가로방향</translation>
<translation>가로</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="197"/>
<source>N-Up Printing</source>
<translation>집약인쇄</translation>
<translation>여러 페이지 출력</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="201"/>
9209,13 → 8219,8
<message>
<location filename="../../scribus/cupsoptions.cpp" line="224"/>
<source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
<translation>이 패널에서 인쇄시 각종 CUPS 옵션을 표시합니다. 사용할 수 있는 정확한 매개 변수는 프린터 드라이버에 따라 다릅니다. &quot;도움말 &gt; Scribus에 대하여&quot;를 선택하여 CUPS를 지원을 확인할 수 있습니다. 목록을 참조 : CCT는 C = CUPS C = littlecms T = TIFF 지원과 동일합니다. 지원 라이브러리가없는 경우는 *로 표시됩니다.</translation>
<translation>이 패널은 인쇄시 다양한 CUPS 설정을 보여줍니다. 이용가능한 정확한 인자는 프린터 드라이버에 의존합니다. 도움말 &gt; 소개를 선택함으로서 CUPS 지원을 확인할 수 있습니다. 목록 찾기: C-C-T에서 C=CUPS C=littlecms T=TIFF 지원함과 같습니다. 라이브러리 지원이 빠진 것은 *으로 표시합니다</translation>
</message>
<message>
<location filename="../../scribus/cupsoptions.cpp" line="160"/>
<source>Mirror</source>
<translation>미러</translation>
</message>
</context>
<context>
<name>CurveWidget</name>
9238,13 → 8243,13
<location filename="../../scribus/curvewidget.cpp" line="483"/>
<source>Cannot write the file:
%1</source>
<translation>파일을 쓸 수 없음:
<translation>파일을 쓸 수 없습니다:
%1</translation>
</message>
<message>
<location filename="../../scribus/curvewidget.cpp" line="509"/>
<source>Inverts the curve</source>
<translation>곡선을 반전</translation>
<translation>곡선을 뒤집기</translation>
</message>
<message>
<location filename="../../scribus/curvewidget.cpp" line="510"/>
9254,7 → 8259,7
<message>
<location filename="../../scribus/curvewidget.cpp" line="511"/>
<source>Switches between linear and cubic interpolation of the curve</source>
<translation>곡선의 직선 및 3 차 보간 사이에서 전환</translation>
<translation>곡선을 선형과 큐빅 보간법에서 전환</translation>
</message>
<message>
<location filename="../../scribus/curvewidget.cpp" line="512"/>
9264,7 → 8269,7
<message>
<location filename="../../scribus/curvewidget.cpp" line="513"/>
<source>Saves this curve</source>
<translation>이 곡선을 저장</translation>
<translation>이 곡선 저장</translation>
</message>
</context>
<context>
9272,7 → 8277,7
<message>
<location filename="../../scribus/customfdialog.cpp" line="327"/>
<source>&amp;Compress File</source>
<translation>파일 압축(&amp;C)</translation>
<translation>압축 파일(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="306"/>
9282,7 → 8287,7
<message>
<location filename="../../scribus/customfdialog.cpp" line="355"/>
<source>Encoding:</source>
<translation>암호화:</translation>
<translation>엔코딩:</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="274"/>
9292,27 → 8297,27
<message>
<location filename="../../scribus/customfdialog.cpp" line="308"/>
<source>&amp;Include Color Profiles</source>
<translation>색상 속성 포함(&amp;I)</translation>
<translation>색상 프로파일 포함(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="275"/>
<source>Show a preview and information for the selected file</source>
<translation>선택 파일의 미리보기 및 정보를 보이기</translation>
<translation>선택된 파일의 미리보기와 정보 보이기</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="342"/>
<source>Compress the Scribus document on save</source>
<translation>저장시 Scribus 문서를 압축</translation>
<translation>저장시 Scribus 문서 압축</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="344"/>
<source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
<translation>문서의 파일을 수집 중 글꼴을 포함. 수집하고 재분배를 위한 임의 글꼴에 대한 라이센스 정보를 알아야 합니다.</translation>
<translation>문서를 위한 파일을 모을 때 글꼴 포함, 모으고 재분배 가능한 임의 글꼴에 대한 저작권 정보를 알고 있어야 합니다.</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="346"/>
<source>Include color profiles when collecting files for the document</source>
<translation>문서의 파일을 줒집 중 색상 프로파일을 포함</translation>
<translation>문서에서 파일을 모을 때 색상 프로파일 포함</translation>
</message>
</context>
<context>
9364,49 → 8369,26
<message>
<location filename="../../scribus/delpages.cpp" line="26"/>
<source>Delete From:</source>
<translation>삭제:</translation>
<translation>삭제 시작:</translation>
</message>
<message>
<location filename="../../scribus/delpages.cpp" line="34"/>
<source>to:</source>
<translation>to:</translation>
<translation>삭제 끝:</translation>
</message>
</context>
<context>
<name>DelStyle</name>
<message>
<location filename="../editformats.cpp" line="36"/>
<source>Delete Style</source>
<translation type="obsolete">스타일 삭제</translation>
</message>
<message>
<location filename="../editformats.cpp" line="42"/>
<source>Delete Style:</source>
<translation type="obsolete">스타일 삭제:</translation>
</message>
<message>
<location filename="../editformats.cpp" line="46"/>
<source>Replace With:</source>
<translation type="obsolete">치환:</translation>
</message>
<message>
<location filename="../editformats.cpp" line="49"/>
<source>No Style</source>
<translation type="obsolete">스타일 없음</translation>
</message>
</context>
<context>
<name>DocIm</name>
<message>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="160"/>
<source>Importing failed</source>
<translation>들여오기 실패</translation>
<translation>읽어오기 실패</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="161"/>
<source>Importing Word document failed
%1</source>
<translation>Word 문서를 들여오는 데 실패
<translation>단어 문서 읽어오기 실패
%1</translation>
</message>
</context>
9430,22 → 8412,22
<message>
<location filename="../../scribus/docinfo.cpp" line="53"/>
<source>&amp;Keywords:</source>
<translation>주제어(&amp;K):</translation>
<translation>핵심어(&amp;K):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="61"/>
<source>Descri&amp;ption:</source>
<translation>해설(&amp;P):</translation>
<translation>요약(&amp;P):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="74"/>
<source>P&amp;ublisher:</source>
<translation>출판자(&amp;U):</translation>
<translation>출판사(&amp;U):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="81"/>
<source>&amp;Contributors:</source>
<translation>공헌자(&amp;C):</translation>
<translation>참여자(&amp;C):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="89"/>
9455,7 → 8437,7
<message>
<location filename="../../scribus/docinfo.cpp" line="96"/>
<source>T&amp;ype:</source>
<translation>형태(&amp;Y):</translation>
<translation>유형(&amp;Y):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="103"/>
9480,7 → 8462,7
<message>
<location filename="../../scribus/docinfo.cpp" line="131"/>
<source>&amp;Relation:</source>
<translation>관계&amp;R):</translation>
<translation>관계(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="138"/>
9490,7 → 8472,7
<message>
<location filename="../../scribus/docinfo.cpp" line="145"/>
<source>Ri&amp;ghts:</source>
<translation>권리(&amp;G):</translation>
<translation>저작권(&amp;G):</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="152"/>
9500,42 → 8482,42
<message>
<location filename="../../scribus/docinfo.cpp" line="153"/>
<source>Further &amp;Information</source>
<translation>자세한 정보(&amp;I)</translation>
<translation>더 많은 정보(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="159"/>
<source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation>개인이나 조직이 첫째로 문서 제작 책임이 있음. 이 객체은 PDF 메타 자료 뿐만 아니라 참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
<translation>문서 내용을 제작하는 것에 대하여 주로 책임이 있는 사람 또는 조직. 이 필드는 PDF의 메타데이타와 참조를 위한 Scribus 문서에 삽입될 수 있습니다</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="160"/>
<source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation>문서에 주어진 이름. 이 객체는 PDF 메타 자료 뿐만 아니라 참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
<translation>문서에 언급된 이름. 이 필드는 PDF의 메타데이타와 참조를 위한 Scribus 문서에 삽입될 수 있습니다</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="161"/>
<source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
<translation>문서 내용 설명. 이 객체는 간략한 설명 또는 문서의 요약. 출력시 PDF에서 중복될 수 있음</translation>
<translation>문서 내용 분량. 이 필드는 문서 간략한 설명 또는 요약입니다. 이것은 PDF 내보내기에서 삽입될 수 있습니다</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="162"/>
<source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
<translation>문서 내용의 주제. 이 객체는 문서에서 PDF에서 끼워넣는 핵심에서, 찾기와 PDF파일 인덱싱을 도와준다.</translation>
<translation>문서 내용 주제. 이 필드는 찾기 및 인덱싱에 도움을 주기 위하여, PDF에 삽입되기 바라는 문서 핵심어입니다</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="163"/>
<source>A person or organisation responsible for making the document available</source>
<translation>자료를 활용가능하도록 만들 책임이 있는 사람이나 조직체</translation>
<translation>이용가능한 문서 작성에 책임이 있는 사람이나 기관</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="164"/>
<source>A person or organisation responsible for making contributions to the content of the document</source>
<translation>문서 내용에 기여를 할 책임이 있는 사람이나 조직체</translation>
<translation>문서 내용에 기여하는데 책임이 있는 사람이나 기관</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="165"/>
<source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
<translation>ISO 8601에 따라 YYYY-MM-DD 형식 내 문서의 사용 기간 중 이벤트와 연관된 날짜</translation>
<translation>문서 주기 이벤트와 관련된 날짜, YYYY-MM-DD 형식, ISO 8601로서</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="166"/>
9545,120 → 8527,85
<message>
<location filename="../../scribus/docinfo.cpp" line="167"/>
<source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
<translation>문서의 물리적 또는 디지탈 명시. 미디어 형태 및 차원은 중요하지 않음. MIME 형태를 위한 RFC2045,RFC2046 는 여기에서 유용함.</translation>
<translation>문서의 물리적 또는 디지털 명시, 미디어 형태와 크기는 쓸모없습니다. MIME 형태의 RFC2045,RFC2046가 유용합니다</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="168"/>
<source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
<translation>ISBN 또는 URI와 같은 주어진 내용내의 문서에 대한 정확한 참고 자료</translation>
<translation>ISBN 또는 URI의 부여 문맥내 문서의 명확한 참조</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="169"/>
<source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
<translation>ISBN 또는 URI와 같은 현재 문서가 파생된 참조자료</translation>
<translation>ISBN 또는 URI의 유래하는 문서의 참조</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="170"/>
<source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
<translation>문서내용이 쓰여진 언어, 예를 들면 en-GB, fr-CH와 같이 하이픈과 ISO-3166 국가코드가 선택적으로 끝에 붙여지는 ISO-639 언어코드</translation>
<translation>문서가 쓰여진 언어, 보통 하이픈 접미사의 ISO-639 언어 코드와 ISO-3166 언어 설정 즉, en_GB, ko_KR</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="171"/>
<source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
<translation>관계 문서 참조, ISBN 또는 URI과 같이 형식적인 지시자를 사용하는 것이 가능함</translation>
<translation>관계된 문서 참조</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="172"/>
<source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
<translation>문서 내용의 한계 또는 범위; 아마도 위치와 시간 그리고 영향 범위를 포함</translation>
<translation>문서 내용 범위 및 한도, 위치,시간,관할 구역등</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="173"/>
<source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
<translation>문서 권리에 대한 정보, 예를 들어 저작권, 특허권, 상표권이 이에 해당</translation>
<translation>문서 권리 정보, 즉 저작권, 저작마크, 특허권등</translation>
</message>
</context>
<context>
<name>DocSections</name>
<message>
<location filename="../../scribus/docinfo.cpp" line="169"/>
<source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
<translation type="obsolete">Ссылка на документ, производным от которого является данный документ, например, в виде ISBN или URI</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="152"/>
<source>Documen&amp;t</source>
<translation type="obsolete">&amp;Документ</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="159"/>
<source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation type="obsolete">Название организации, в первую очередь ответственной за создание этого документа. Это поле может быть встроено как в документ Scribus для ссылок на него, так и в метаданные PDF</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="160"/>
<source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation type="obsolete">Имя, данное документу. Это поле может быть встроено как в документ Scribus для ссылок на него, так и в метаданные PDF</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="161"/>
<source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
<translation type="obsolete">Краткое описание содержимого документа. Это поле для краткого описания или аннотации к документу, встраиваемое в экспортируемый файл PDF</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="162"/>
<source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
<translation type="obsolete">Тема этого документа. Это поле содержит ключевые слова документа для встраивания в файл PDF для упрощения поиска и индексирования таких файлов</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="167"/>
<source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
<translation type="obsolete">Физическое или цифровое представление этого документа. Стоит указать тип носителя и его размеры. Также полезны RFC2045 и RFC2046 для типов MIME</translation>
</message>
<message>
<location filename="../../scribus/docinfo.cpp" line="170"/>
<source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
<translation type="obsolete">Язык, на котором написан документ, обычно обозначенный кодом ISO-639, по выбору с суффиксом в виде дефиса и кодом страны по ISO-3166, например: en-GB, fr-CH</translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="72"/>
<source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
<translation>페이지 번호 부분을 문서에 더하기. 새 섹션은 현재 선택된 섹션 뒤에 더해진다.</translation>
<translation>페이지 번호 부분에 문서를 더하기, 새 섹션은 현재 선택된 페이지 뒷부분에 더해집니다.</translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="73"/>
<source>Delete the currently selected section.</source>
<translation>현재 선택된 섹션 삭제</translation>
<translation>현재 선택된 섹션 삭제.</translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="79"/>
<source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="87"/>
<source>1, 2, 3, ...</source>
<translation>1, 2, 3, ...</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="87"/>
<source>i, ii, iii, ...</source>
<translation>i, ii, iii, ...</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="87"/>
<source>I, II, III, ...</source>
<translation>I, II, III, ...</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="87"/>
<source>a, b, c, ...</source>
<translation>a, b, c, ...</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="87"/>
<source>A, B, C, ...</source>
<translation>A, B, C, ...</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="201"/>
<source>Page Number Out Of Bounds</source>
<translation>제본의 페이지 번호</translation>
<translation>범위 밖 페이지 번호</translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="201"/>
9673,12 → 8620,12
<message>
<location filename="../../scribus/docsections.ui" line="83"/>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
<translation>더히기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/docsections.ui" line="86"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.ui" line="93"/>
9688,7 → 8635,7
<message>
<location filename="../../scribus/docsections.ui" line="96"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docsections.ui" line="32"/>
9698,12 → 8645,12
<message>
<location filename="../../scribus/docsections.ui" line="37"/>
<source>Shown</source>
<translation>표시</translation>
<translation>보이기</translation>
</message>
<message>
<location filename="../../scribus/docsections.ui" line="42"/>
<source>From</source>
<translation>부터</translation>
<translation>에서</translation>
</message>
<message>
<location filename="../../scribus/docsections.ui" line="47"/>
9720,76 → 8667,14
<source>Start</source>
<translation>시작</translation>
</message>
<message>
<location filename="../../scribus/docsections.cpp" line="79"/>
<source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocSectionsBase</name>
<message>
<location filename="" line="0"/>
<source>Document Sections</source>
<translation type="obsolete">문서 섹션</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Name</source>
<translation type="obsolete">이름</translation>
</message>
<message>
<location filename="" line="0"/>
<source>From</source>
<translation type="obsolete">에서</translation>
</message>
<message>
<location filename="" line="0"/>
<source>To</source>
<translation type="obsolete">로</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Style</source>
<translation type="obsolete">스타일</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Start</source>
<translation type="obsolete">시작</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Add</source>
<translation type="obsolete">더하기(&amp;A)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+A</source>
<translation type="obsolete">Alt+A</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Delete</source>
<translation type="obsolete">삭제(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+D</source>
<translation type="obsolete">Alt+D</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Shown</source>
<translation type="obsolete">보임</translation>
</message>
</context>
<context>
<name>DocumentItemAttributes</name>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>None</source>
<translation type="obsolete">없음</translation>
<comment>relationship</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
9808,8 → 8693,14
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>None</source>
<comment>auto add</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>Text Frames</source>
<translation>텍스트 프레임</translation>
<translation>문자열 프레임</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
9818,6 → 8709,12
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>None</source>
<comment>types</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Boolean</source>
<translation>부울식</translation>
</message>
9828,6 → 8725,11
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Real Number</source>
<translation>실수</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>String</source>
<translation>문자열</translation>
</message>
9837,41 → 8739,6
<translation>문서 객체 속성</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="26"/>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="31"/>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="36"/>
<source>Value</source>
<translation>값</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="41"/>
<source>Parameter</source>
<translation>매개변수</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="46"/>
<source>Relationship</source>
<translation>관계</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="51"/>
<source>Relationship To</source>
<translation>대상</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="56"/>
<source>Auto Add To</source>
<translation>자동 더하기</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="82"/>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
9879,7 → 8746,7
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="85"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="92"/>
9889,7 → 8756,7
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="95"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="102"/>
9899,135 → 8766,74
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="105"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="112"/>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
<translation>지우기(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="115"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>None</source>
<comment>relationship</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>None</source>
<comment>auto add</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>None</source>
<comment>types</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Real Number</source>
<translation>실수</translation>
</message>
</context>
<context>
<name>DocumentItemAttributesBase</name>
<message>
<location filename="" line="0"/>
<source>Document Item Attributes</source>
<translation type="obsolete">문서 객체 속성</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="26"/>
<source>Name</source>
<translation type="obsolete">이름</translation>
<translation>이름</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="31"/>
<source>Type</source>
<translation type="obsolete">형태</translation>
<translation>형태</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="36"/>
<source>Value</source>
<translation type="obsolete">값</translation>
<translation>값</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="41"/>
<source>Parameter</source>
<translation type="obsolete">매개변수</translation>
<translation>인자</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="46"/>
<source>Relationship</source>
<translation type="obsolete">관계</translation>
<translation>관계</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="51"/>
<source>Relationship To</source>
<translation type="obsolete">관련처</translation>
<translation>관계 대상</translation>
</message>
<message>
<location filename="" line="0"/>
<location filename="../../scribus/docitemattrprefs.ui" line="56"/>
<source>Auto Add To</source>
<translation type="obsolete">자동 더하기</translation>
<translation>대상 자동 더하기</translation>
</message>
</context>
<context>
<name>EPSPlug</name>
<message>
<location filename="" line="0"/>
<source>&amp;Add</source>
<translation type="obsolete">더하기(&amp;A)</translation>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="85"/>
<source>Analyzing PostScript:</source>
<translation>포스트스크립트 분석 중:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+A</source>
<translation type="obsolete">Alt+A</translation>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="743"/>
<source>Group%1</source>
<translation>그룹 %1</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Copy</source>
<translation type="obsolete">복사(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Delete</source>
<translation type="obsolete">섹제(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+D</source>
<translation type="obsolete">Alt+D</translation>
</message>
<message>
<location filename="" line="0"/>
<source>C&amp;lear</source>
<translation type="obsolete">삭제(&amp;L)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+L</source>
<translation type="obsolete">Alt+L</translation>
</message>
</context>
<context>
<name>EPSPlug</name>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="478"/>
<source>Importing File:
%1
failed!</source>
<translation>파일 들여오기:
<translation>파일 읽어오는 중
%1
실패함!</translation>
실패!</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="479"/>
10035,189 → 8841,27
<translation>치명적 오류</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Converting Image:
%1
failed!</source>
<translation type="obsolete">이미지 변환 중:
%1
실패!</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="877"/>
<source>Error</source>
<translation>오류</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="85"/>
<source>Analyzing PostScript:</source>
<translation>포스트스크립트 분석:</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="484"/>
<source>Generating Items</source>
<translation>객체 생성</translation>
<translation>객체 생성 중</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="876"/>
<source>Converting of %1 images failed!</source>
<translation>%1 이미지 변환 실패!</translation>
<translation>%1 이미지 변환 중 실패!</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="743"/>
<source>Group%1</source>
<translation>그룹 %1</translation>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="877"/>
<source>Error</source>
<translation>오류</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="82"/>
<source>Importing: %1</source>
<translation>들여오기: %1</translation>
<translation>읽어오는 중: %1</translation>
</message>
</context>
<context>
<name>EditStyle</name>
<message>
<location filename="../edit1format.cpp" line="47"/>
<source>Edit Style</source>
<translation type="obsolete">스타일 편집</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="67"/>
<source>&amp;Name:</source>
<translation type="obsolete">이름(&amp;N):</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="80"/>
<source>Character</source>
<translation type="obsolete">문자</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="272"/>
<source> pt</source>
<translation type="obsolete"> 포인트</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="239"/>
<source> %</source>
<translation type="obsolete"> %</translation>
</message>
<message>
<location filename="" line="0"/>
<source>None</source>
<translation type="obsolete">없음</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="200"/>
<source>Distances</source>
<translation type="obsolete">거리</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="209"/>
<source>Fixed Linespacing</source>
<translation type="obsolete">고정 줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="210"/>
<source>Automatic Linespacing</source>
<translation type="obsolete">자동 줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="211"/>
<source>Align to Baseline Grid</source>
<translation type="obsolete">기준선 격자 정렬</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="268"/>
<source>&amp;Lines:</source>
<translation type="obsolete">선(&amp;L):</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="274"/>
<source>Distance from Text:</source>
<translation type="obsolete">텍스트로부터 거리:</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="300"/>
<source>Tabulators and Indentation</source>
<translation type="obsolete">탭키 설정 및 들여쓰기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="324"/>
<source>Preview of the Paragraph Style</source>
<translation type="obsolete">문단 스타일 미리보기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="360"/>
<source>Name of your paragraph style</source>
<translation type="obsolete">문단 스타일 이름</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="361"/>
<source>Font of selected text or object</source>
<translation type="obsolete">선택된 텍스트나 객체 글꼴</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="362"/>
<source>Font Size</source>
<translation type="obsolete">글꼴 크기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="363"/>
<source>Color of text fill</source>
<translation type="obsolete">텍스트 채움 색상</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="364"/>
<source>Color of text stroke</source>
<translation type="obsolete">텍스트 외곽선 색상</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="369"/>
<source>Spacing above the paragraph</source>
<translation type="obsolete">문단 위 여백</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="373"/>
<source>Line Spacing</source>
<translation type="obsolete">줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="375"/>
<source>Toggles sample text of this paragraph style</source>
<translation type="obsolete">이 문단 스타일의 예제 텍스트 토글</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Warning</source>
<translation type="obsolete">경고</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Name of the Style is not unique</source>
<translation type="obsolete">스타일 이름이 이미 있습니다</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="328"/>
<source>Background</source>
<translation type="obsolete">배경</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="371"/>
<source>Manual Tracking</source>
<translation type="obsolete">수동 탐색</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="372"/>
<source>Offset to baseline of characters</source>
<translation type="obsolete">문자 기준선까지 옵셋</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="448"/>
<source>Auto</source>
<translation type="obsolete">자동</translation>
</message>
</context>
<context>
<name>EditToolBar</name>
<message>
<location filename="../../scribus/ui/edittoolbar.cpp" line="29"/>
10235,7 → 8879,7
<message>
<location filename="../../scribus/editor.cpp" line="36"/>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
<translation>새로(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="39"/>
10245,22 → 8889,22
<message>
<location filename="../../scribus/editor.cpp" line="41"/>
<source>Save &amp;As...</source>
<translation>다음 이름으로 저장(&amp;A)...</translation>
<translation>다른 이름으로 저장(&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="43"/>
<source>&amp;Save and Exit</source>
<translation>저장 및 종료(&amp;S)</translation>
<translation>저장하고 종료(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="45"/>
<source>&amp;Exit without Saving</source>
<translation>저장 없이 종료(&amp;E)</translation>
<translation>저장하지 않고 종료(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="47"/>
<source>&amp;Undo</source>
<translation>이전작업(&amp;U)</translation>
<translation>이전으로(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="50"/>
10285,7 → 8929,7
<message>
<location filename="../../scribus/editor.cpp" line="61"/>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
<translation>지우기(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="63"/>
10310,27 → 8954,27
<message>
<location filename="../../scribus/editor.cpp" line="37"/>
<source>Ctrl+N</source>
<translation>Ctrl+N</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="48"/>
<source>Ctrl+Z</source>
<translation>Ctrl+Z</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="53"/>
<source>Ctrl+X</source>
<translation>Ctrl+X</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="56"/>
<source>Ctrl+C</source>
<translation>Ctrl+C</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/editor.cpp" line="59"/>
<source>Ctrl-V</source>
<translation>Ctrl-V</translation>
<translation></translation>
</message>
</context>
<context>
10373,7 → 9017,7
<message>
<location filename="../../scribus/effectsdialog.cpp" line="180"/>
<source>Value:</source>
<translation>명도:</translation>
<translation>값:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="216"/>
10381,6 → 9025,26
<translation>포스터화:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="351"/>
<source>Color 1:</source>
<translation>색상 1:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="371"/>
<source>Color 2:</source>
<translation>색상 2:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="391"/>
<source>Color 3:</source>
<translation>색상 3:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="411"/>
<source>Color 4:</source>
<translation>색상 4:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="500"/>
<source>Available Effects</source>
<translation>이용가능한 효과</translation>
10401,6 → 9065,21
<translation>색상화</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1412"/>
<source>Duotone</source>
<translation>흑백</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1448"/>
<source>Tritone</source>
<translation>3가지 색</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1499"/>
<source>Quadtone</source>
<translation>4가지 색</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1377"/>
<source>Contrast</source>
<translation>대비</translation>
10411,6 → 9090,11
<translation>회색톤</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1565"/>
<source>Curves</source>
<translation>곡선</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="983"/>
<source>Invert</source>
<translation>반전</translation>
10423,17 → 9107,17
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1383"/>
<source>Sharpen</source>
<translation>강조</translation>
<translation>날카롭게</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="482"/>
<source>&gt;&gt;</source>
<translation>&gt;&gt;</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="486"/>
<source>&lt;&lt;</source>
<translation>&lt;&lt;</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="497"/>
10450,46 → 9134,6
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="351"/>
<source>Color 1:</source>
<translation>색상 1:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="371"/>
<source>Color 2:</source>
<translation>색상 2:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="391"/>
<source>Color 3:</source>
<translation>색상 3:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="411"/>
<source>Color 4:</source>
<translation>색상 4:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1412"/>
<source>Duotone</source>
<translation>2색조</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1448"/>
<source>Tritone</source>
<translation>3색조</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1499"/>
<source>Quadtone</source>
<translation>4색조</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1565"/>
<source>Curves</source>
<translation>곡선</translation>
</message>
</context>
<context>
<name>ExportBitmap</name>
10496,27 → 9140,27
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
<source>File exists. Overwrite?</source>
<translation>파일이 있습니다. 겹쳐쓰겠습니까?</translation>
<translation>파일이 있습니다. 겹쳐쓸까요?</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="205"/>
<source>exists already. Overwrite?</source>
<translation>이미 있습니다. 겹쳐쓰겠습니까?</translation>
<translation>이미 있습니다. 겹쳐쓸까요?</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="218"/>
<source>Save as Image</source>
<translation>이미지 저장</translation>
<translation>이미지로 저장</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="192"/>
<source>Insufficient memory for this image size.</source>
<translation>이 이미지 크기에 불충분한 메모리</translation>
<translation>이 이미지 크기에 대하여 불충분한 메모리.</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="219"/>
<source>Error writing the output file(s).</source>
<translation>출력파일 쓰기 오류.</translation>
<translation>출력 파일을 쓰는 중 오류.</translation>
</message>
</context>
<context>
10524,7 → 9168,7
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="80"/>
<source>Choose a Export Directory</source>
<translation>내보낼 폴더 선택</translation>
<translation>내보내기 폴더 선택</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="13"/>
10534,12 → 9178,12
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="153"/>
<source>&amp;Export to Directory:</source>
<translation>내보내기 폴더(&amp;E):</translation>
<translation>폴더로 내보내기(&amp;E):</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="166"/>
<source>C&amp;hange...</source>
<translation>바꾸기(&amp;H)...</translation>
<translation>변경(&amp;H)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="25"/>
10569,12 → 9213,12
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="126"/>
<source> %</source>
<translation> %</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="110"/>
<source> dpi</source>
<translation> dpi</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="175"/>
10597,9 → 9241,14
<translation>범위(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="44"/>
<source>Image size in Pixels</source>
<translation>화소단위 이미지 크기</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
<source>Export a range of pages</source>
<translation>페이지 지정범위 내보내기</translation>
<translation>페이지 범위 내보내기</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
10607,8 → 9256,8
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
<translation>콤마로 표시된 토큰 목록을 입력합니다.
토큰에서 *은 모든 페이지를,일정범위를 나타날 때는 1-5과 같이,
혹은 한 페이지 번호를 이용할 수 있습니다.</translation>
토큰에서 *은 모든 페이지를,일정범위를 1-5과 같이,
혹은 단일 페이지 번호를 이용할 수 있습니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
10624,55 → 9273,45
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="121"/>
<source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
<translation>이미지의 해상도
화면상에는 72 dpi 이미지를 사용합니다</translation>
<translation>이미지 해상도
화면 기준 이미지는 72dpi 사용</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="122"/>
<source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
<translation>이미지의 크기. 100%에서는 변화없고,200%에서는 2배 커집니다。</translation>
<translation>이미지의 크기. 100%는 변화없음, 200%는 2배 크기로 확대등.</translation>
</message>
<message>
<location filename="" line="0"/>
<source>The quality of your images - 100% is the best, 1% the lowest quality</source>
<translation type="obsolete">이미지 품질 - 100%는 최고,1%는 최저의 품질입니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="125"/>
<source>Available export formats</source>
<translation>사용가능한 내보내기 형식</translation>
<translation>이용가능한 내보내기 형식</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="126"/>
<source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
<translation>출력 폴더 -이미지를 저장하는 장소.
출력 파일명은&apos;문서명-페이지 번호.확장자&apos;가 됩니다.</translation>
<translation>출력 폴더 - 이미지를 저장할 위치
내보내기 파일명은 &apos;문서명-페이지번호.파일형식&apos;입니다</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="127"/>
<source>Change the output directory</source>
<translation>출력 폴더 바꾸기</translation>
<translation>출력 폴더 변경</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="44"/>
<source>Image size in Pixels</source>
<translation>화소단위 이미지 크기</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="37"/>
<source>TextLabel</source>
<translation>텍스트 라벨</translation>
<translation>문자열 라벨</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="123"/>
<source>The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use &apos;Automatic&apos;</source>
<translation type="unfinished"></translation>
<translation>이미지의 압축 비율 - 100%는 압축 없음, 0%는 최고 압축, 모르면 &apos;자동&apos;으로 선택</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="124"/>
<source>Automatic</source>
<translation type="unfinished">자동</translation>
<translation>자동</translation>
</message>
</context>
<context>
10685,7 → 9324,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="102"/>
<source>Normal</source>
<translation>보통</translation>
<translation>일반</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="103"/>
10715,7 → 9354,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="108"/>
<source>Luminosity</source>
<translation>광도</translation>
<translation>명도</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="109"/>
10725,7 → 9364,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="110"/>
<source>Screen</source>
<translation>화면</translation>
<translation>스크린</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="111"/>
10735,17 → 9374,17
<message>
<location filename="../../scribus/extimageprops.cpp" line="112"/>
<source>Overlay</source>
<translation>중첩</translation>
<translation>오버레이</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="113"/>
<source>Hard Light</source>
<translation>아주 밝게</translation>
<translation>더 밝게</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="114"/>
<source>Soft Light</source>
<translation>중간 밝게</translation>
<translation>부드러운 빛</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="115"/>
10760,12 → 9399,12
<message>
<location filename="../../scribus/extimageprops.cpp" line="117"/>
<source>Color Dodge</source>
<translation>피하기</translation>
<translation>색상 피하기(도지)</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="118"/>
<source>Color Burn</source>
<translation>태우기</translation>
<translation>색상 태움(번)</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="98"/>
10780,7 → 9419,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="127"/>
<source> %</source>
<translation> %</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="133"/>
10795,7 → 9434,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="267"/>
<source>Don&apos;t use any Path</source>
<translation>임의 경로를 사용하지 마시오</translation>
<translation>임의 경로 사용하지 않음</translation>
</message>
<message>
<location filename="../../scribus/extimageprops.cpp" line="269"/>
10805,7 → 9444,7
<message>
<location filename="../../scribus/extimageprops.cpp" line="276"/>
<source>Live Preview</source>
<translation>라이브 미리보기</translation>
<translation>지금 미리보기</translation>
</message>
</context>
<context>
10823,12 → 9462,12
<message>
<location filename="../../scribus/customfdialog.cpp" line="199"/>
<source>DPI</source>
<translation>DPI</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="229"/>
<source>Unknown</source>
<translation>미정</translation>
<translation>알려지지 않음</translation>
</message>
<message>
<location filename="../../scribus/customfdialog.cpp" line="205"/>
10862,154 → 9501,16
</message>
</context>
<context>
<name>Farbmanager</name>
<message>
<location filename="" line="0"/>
<source>Colors</source>
<translation type="obsolete">색상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Import</source>
<translation type="obsolete">들여오기(&amp;I)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;New</source>
<translation type="obsolete">새 파일(&amp;N)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Edit</source>
<translation type="obsolete">편집(&amp;E)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>D&amp;uplicate</source>
<translation type="obsolete">복제(&amp;U)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Delete</source>
<translation type="obsolete">삭제(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Remove Unused</source>
<translation type="obsolete">미사용 제거(&amp;R)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Color Sets</source>
<translation type="obsolete">색상 모음</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Current Color Set:</source>
<translation type="obsolete">현재 색상 모음:</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Save Color Set</source>
<translation type="obsolete">색상 모음 저장(&amp;S)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Choose a color set to load</source>
<translation type="obsolete">읽기위해 색상 모음 선택</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Save the current color set</source>
<translation type="obsolete">현재 색상 모음 저장</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Remove unused colors from current document&apos;s color set</source>
<translation type="obsolete">현재 문서에서 미사용 색상 제거</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Import colors to the current set from an existing document</source>
<translation type="obsolete">기존 문서로부터색상을 현재 모음으로 들여오기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Create a new color within the current set</source>
<translation type="obsolete">현재 모음내에서 새 색상 생성</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Edit the currently selected color</source>
<translation type="obsolete">현재 선택 색상 편집</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make a copy of the currently selected color</source>
<translation type="obsolete">현재 선택 색상의 사본 생성</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Delete the currently selected color</source>
<translation type="obsolete">현재 선택 색상을 삭제</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Make the current colorset the default color set</source>
<translation type="obsolete">현재 색상 모음을 기본 색상모음으로 만듦</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Name:</source>
<translation type="obsolete">이름(&amp;N):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Choose a Name</source>
<translation type="obsolete">이름 선택</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Open</source>
<translation type="obsolete">열기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation type="obsolete">문서 (*.sla *.sla.gz *.scd *.scd.gz);;전체 파일 (*)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation type="obsolete">문서 (*.sla *.scd);;전체 파일 (*)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Copy of %1</source>
<translation type="obsolete">%1 복사</translation>
</message>
<message>
<location filename="" line="0"/>
<source>New Color</source>
<translation type="obsolete">새 색상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>None</source>
<translation type="obsolete">없음</translation>
</message>
</context>
<context>
<name>FileLoader</name>
<message>
<location filename="../../scribus/fileloader.cpp" line="594"/>
<source>Some fonts used by this document have been substituted:</source>
<translation>이 문서에서 사용되고 있는 몇개의 글꼴은 치환되었습니다:</translation>
<translation>이 문서에 의해 사용된 몇몇 글꼴이 치환되었습니다:</translation>
</message>
<message>
<location filename="../../scribus/fileloader.cpp" line="598"/>
<source> was replaced by: </source>
<translation>치환함: </translation>
<translation>치환:</translation>
</message>
</context>
<context>
11025,7 → 9526,7
<message>
<location filename="../../scribus/fontcombo.cpp" line="148"/>
<source>Face:</source>
<translation>인쇄면:</translation>
<translation>면:</translation>
</message>
<message>
<location filename="../../scribus/fontcombo.cpp" line="149"/>
11053,12 → 9554,12
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="69"/>
<source>Style</source>
<translation>형태</translation>
<translation>스타일</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="71"/>
<source>Variant</source>
<translation>변이</translation>
<translation>변화</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="73"/>
11073,7 → 9574,7
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="77"/>
<source>Embed in PostScript</source>
<translation>포스트스크립트에 내장</translation>
<translation>포스트스크립에서 겹침</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="79"/>
11088,7 → 9589,7
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="83"/>
<source>Used in Doc</source>
<translation>문서에서 사용 중</translation>
<translation>문서에서 사용</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="85"/>
11099,13 → 9600,13
<location filename="../../scribus/fontlistmodel.cpp" line="144"/>
<source>Unknown</source>
<comment>font type</comment>
<translation>미정</translation>
<translation>알려지지 않음</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="157"/>
<source>Unknown</source>
<comment>font format</comment>
<translation>미정</translation>
<translation>알려지지 않음</translation>
</message>
<message>
<location filename="../../scribus/fontlistmodel.cpp" line="164"/>
11150,7 → 9651,7
<message>
<location filename="../../scribus/fontprefs.cpp" line="66"/>
<source>Font Name</source>
<translation>글꼴 이름</translation>
<translation>글꼴명</translation>
</message>
<message>
<location filename="../../scribus/fontprefs.cpp" line="67"/>
11170,7 → 9671,7
<message>
<location filename="../../scribus/fontprefs.cpp" line="107"/>
<source>C&amp;hange...</source>
<translation>바꾸기(&amp;H)...</translation>
<translation>변경(&amp;H)...</translation>
</message>
<message>
<location filename="../../scribus/fontprefs.cpp" line="109"/>
11195,145 → 9696,29
<message>
<location filename="../../scribus/fontprefs.cpp" line="130"/>
<source>Font search paths can only be set in File &gt; Preferences, and only when there is no document currently open. Close any open documents, then use File &gt; Preferences &gt; Fonts to change the font search path.</source>
<translation>글꼴 찾기 경로는 파일 &gt; 기본설정에서 설정할 수 있습니다. 그리고 열린 문서가 현재 없을 때만 할 수 있습니다. 어떤 열린 문서를 닫고, 글꼴 찾기 경로를 변경하기 위하여 파일 &gt; 기본설정 &gt; 글꼴을 사용합니다.</translation>
<translation>글꼴 찾기 경로는 &quot;파일 &gt; 기본 설정&quot; 에서 현재 열린 문서가 없을 때만,설정을 할 수 있습니다. 글꼴 찾기 경로를 변경하기 위하여 문서가 열려있을 때 닫은 후, &quot;파일 &gt; 기본 설정 &gt; 글꼴&quot; 을 이용합니다.</translation>
</message>
</context>
<context>
<name>FontPreview</name>
<message>
<location filename="" line="0"/>
<source>Font Name</source>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
<source>Woven silk pyjamas exchanged for blue quartz</source>
<comment>font preview</comment>
<translation type="obsolete">글꼴 이름</translation>
<translation>사랑하는 이여! 항상 옆에서 아이와 함께 해주기를</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Type</source>
<comment>font preview</comment>
<translation type="obsolete">형태</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Subset</source>
<comment>font preview</comment>
<translation type="obsolete">부분집합</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Access</source>
<comment>font preview</comment>
<translation type="obsolete">접근</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Font Size:</source>
<translation type="obsolete">글꼴 크기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Fonts Preview</source>
<comment>font preview</comment>
<translation type="obsolete">글꼴 미리보기</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.ui" line="209"/>
<source>&amp;Append</source>
<translation type="obsolete">첨가하기(&amp;A)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+O</source>
<comment>font preview</comment>
<translation type="obsolete">Alt+O</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Quick Search: </source>
<translation type="obsolete">빠른 찾기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
<source>&amp;Search</source>
<translation type="obsolete">찾기(&amp;S)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Close</source>
<comment>font preview</comment>
<translation type="obsolete">닫기(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<comment>font preview</comment>
<translation type="obsolete">Alt+C</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="164"/>
<source>Append selected font into Style, Font menu</source>
<comment>font preview</comment>
<translation type="obsolete">선택된 글꼴을 스타일, 글꼴 메뉴로 첨가하기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="111"/>
<source>Leave preview</source>
<comment>font preview</comment>
<translation>미리보기 종료</translation>
<translation>글꼴 미리보기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Typing the text here provides quick searching in the font names. E.g. &apos;bold&apos; shows all fonts with Bold in name. Searching is case insensitive.</source>
<translation type="obsolete">텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 즉 &apos;bold&apos; 입력은 bold이름을 가진 모든 글꼴을 보여준다. 찾기는 대소문자 무시된다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="114"/>
<source>Start searching</source>
<translation type="obsolete">찾기 시작</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="113"/>
<source>Size of the selected font</source>
<translation>선택 글꼴 크기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
<source>Woven silk pyjamas exchanged for blue quartz</source>
<comment>font preview</comment>
<translation>단지, 살아있음에 감사하며 행복을 느낍니다...</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="97"/>
<source>User</source>
<comment>font preview</comment>
<translation type="obsolete">사용자</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="98"/>
<source>System</source>
<comment>font preview</comment>
<translation type="obsolete">시스템</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="42"/>
<source>Font Name</source>
<translation type="obsolete">글꼴이름</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="44"/>
<source>Type</source>
<translation type="obsolete">형태</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="45"/>
<source>Subset</source>
<translation type="obsolete">부분집합</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="46"/>
<source>Access</source>
<translation type="obsolete">접근</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="13"/>
<source>Fonts Preview</source>
<translation>글꼴 미리보기</translation>
11344,11 → 9729,6
<translation>빠른 찾기(&amp;Q):</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="38"/>
<source>Alt+S</source>
<translation type="obsolete">Alt+S</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="80"/>
<source>&amp;Font Size:</source>
<translation>글꼴 크기(&amp;F):</translation>
11356,12 → 9736,12
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="103"/>
<source>Text</source>
<translation>텍스트</translation>
<translation>문자열</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="113"/>
<source>Sample text to display</source>
<translation>보여질 예제 텍스트</translation>
<translation>보이기 위한 단순 문자열</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="123"/>
11371,12 → 9751,12
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="126"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="133"/>
<source>Reset the text</source>
<translation>텍스트 초기화</translation>
<translation>문자열 초기화</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="167"/>
11386,103 → 9766,30
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="170"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="112"/>
<source>Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring.</source>
<translation>텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 찾기는 대소문자 무시된다. 주어진 텍스트는 부분 문자열로 취급됨</translation>
<translation>여기에 문자열을 입력하면 글꼴명에서 빠른 찾기를 할 수 있습니다. 찾기는 대소문자가 구별되며, 주어진 문자열을 하위 문자열로 취급합니다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="136"/>
<source>&amp;Default</source>
<translation>기본값(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
<source>Show Extended Font Information</source>
<translation>확장 글꼴 정보 보이기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="136"/>
<source>&amp;Default</source>
<translation>기본값(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="120"/>
<source>Set the preview text</source>
<translation type="unfinished"></translation>
<translation>미리보기 문자열 설정</translation>
</message>
</context>
<context>
<name>FontPreviewBase</name>
<message>
<location filename="" line="0"/>
<source>Fonts Preview</source>
<translation type="obsolete">글꼴 미리보기</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Search</source>
<translation type="obsolete">찾기(&amp;S)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+S</source>
<translation type="obsolete">Alt+S</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Font Name</source>
<translation type="obsolete">글꼴 이름</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Type</source>
<translation type="obsolete">형태</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Subset</source>
<translation type="obsolete">부분집합</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Access</source>
<translation type="obsolete">접근</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Font Size:</source>
<translation type="obsolete">글꼴 크기(&amp;F):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Text</source>
<translation type="obsolete">텍스트</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Sample text to display</source>
<translation type="obsolete">보여질 예제 텍스트</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Append</source>
<translation type="obsolete">추가하기(&amp;A)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+A</source>
<translation type="obsolete">Alt+A</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Close</source>
<translation type="obsolete">닫기(&amp;C)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
</context>
<context>
<name>FontPreviewPlugin</name>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
11497,7 → 9804,7
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="67"/>
<source>Sorting, searching and browsing available fonts.</source>
<translation>이용 가능한 글꼴의 정렬, 찾기</translation>
<translation>이용가능한 글꼴 정렬, 찾기와 탐색.</translation>
</message>
</context>
<context>
11510,22 → 9817,22
<message>
<location filename="../../scribus/fontreplacedialog.cpp" line="40"/>
<source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
<translation>이 문서는 시스템에 사용되지 않는 글꼴을 기지고 있으므로, 적절한 대체 글꼴을 선택하시오. 취소하면, 문서 읽기를 중지합니다.</translation>
<translation>이 문서는 시스템에 설치되지 않는 글꼴을 포함하므로, 적절한 대체 글꼴을 선택하시오. 취소하면, 문서 읽기를 중지합니다.</translation>
</message>
<message>
<location filename="../../scribus/fontreplacedialog.cpp" line="45"/>
<source>Original Font</source>
<translation>초기 글꼴</translation>
<translation>원래 글꼴</translation>
</message>
<message>
<location filename="../../scribus/fontreplacedialog.cpp" line="46"/>
<source>Substitution Font</source>
<translation>글꼴 치환</translation>
<translation>치환 글꼴</translation>
</message>
<message>
<location filename="../../scribus/fontreplacedialog.cpp" line="72"/>
<source>Make these substitutions permanent</source>
<translation>계속 치환</translation>
<translation>이들 치환을 영구히 만듦</translation>
</message>
<message>
<location filename="../../scribus/fontreplacedialog.cpp" line="83"/>
11546,6 → 9853,11
<context>
<name>GradientEditor</name>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="336"/>
<source>Add, change or remove color stops here</source>
<translation>이 곳에서 색상 조절점을 더하기, 변경 또는 제거</translation>
</message>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="327"/>
<source>Position:</source>
<translation>위치:</translation>
11553,13 → 9865,8
<message>
<location filename="../../scribus/gradienteditor.cpp" line="328"/>
<source> %</source>
<translation> %</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="336"/>
<source>Add, change or remove color stops here</source>
<translation>색상 눈금을 더하기, 변경하기 또는 제거하기</translation>
</message>
</context>
<context>
<name>GradientVectorDialog</name>
11572,39 → 9879,39
<context>
<name>GuideManager</name>
<message>
<location filename="" line="0"/>
<source>Manage Guides</source>
<translation type="obsolete">안내선 관리</translation>
<location filename="../../scribus/guidemanager.ui" line="31"/>
<source>&amp;Single</source>
<translation>개별(&amp;S)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Horizontal Guides</source>
<translation type="obsolete">수평 안내선</translation>
<location filename="../../scribus/guidemanager.ui" line="146"/>
<source>Horizontals</source>
<translation>수평</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Y-Pos:</source>
<translation type="obsolete">Y 위치(&amp;Y):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="55"/>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="356"/>
<source>Alt+A</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="65"/>
<source>D&amp;elete</source>
<translation>삭제(&amp;E)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Vertical Guides</source>
<translation type="obsolete">수직 안내선</translation>
<location filename="../../scribus/guidemanager.ui" line="307"/>
<source>Alt+E</source>
<translation></translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;X-Pos:</source>
<translation type="obsolete">X 위치(&amp;X):</translation>
<location filename="../../scribus/guidemanager.ui" line="233"/>
<source>Verticals</source>
<translation>수직</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="94"/>
11612,14 → 9919,19
<translation>더하기(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="97"/>
<source>Alt+D</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="104"/>
<source>De&amp;lete</source>
<translation>삭제(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="281"/>
<source>&amp;Page</source>
<translation>페이지(&amp;P)</translation>
<location filename="../../scribus/guidemanager.ui" line="122"/>
<source>Alt+L</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="119"/>
11627,49 → 9939,14
<translation>안내선 잠금(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="31"/>
<source>&amp;Single</source>
<translation>개별 설정</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="146"/>
<source>Horizontals</source>
<translation>수평선</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="356"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="307"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="233"/>
<source>Verticals</source>
<translation>수직선</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="97"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="122"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="320"/>
<source>Appl&amp;y to All Pages</source>
<translation>전체 페이지 적용(&amp;Y)</translation>
<translation>전체 페이지에 적용(&amp;Y)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="323"/>
<source>Alt+Y</source>
<translation>Alt+Y</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="140"/>
11679,7 → 9956,7
<message>
<location filename="../../scribus/guidemanager.ui" line="152"/>
<source>&amp;Number:</source>
<translation>숫자(&amp;N):</translation>
<translation>갯수(&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="175"/>
11689,17 → 9966,17
<message>
<location filename="../../scribus/guidemanager.ui" line="178"/>
<source>Alt+S</source>
<translation>Alt+S</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="275"/>
<source>Refer to</source>
<translation>기준</translation>
<location filename="../../scribus/guidemanager.ui" line="281"/>
<source>&amp;Page</source>
<translation>페이지(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="343"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="294"/>
11709,12 → 9986,12
<message>
<location filename="../../scribus/guidemanager.ui" line="304"/>
<source>S&amp;election</source>
<translation>선택(&amp;E):</translation>
<translation>선택(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="239"/>
<source>Nu&amp;mber:</source>
<translation>숫자(&amp;M):</translation>
<translation>갯수(&amp;M):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="262"/>
11724,32 → 10001,32
<message>
<location filename="../../scribus/guidemanager.ui" line="265"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="331"/>
<source>&amp;Misc</source>
<translation>안내선 삭제(&amp;M)</translation>
<translation>기타(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="337"/>
<source>Delete all guides from the current page</source>
<translation>현재 페이지에서 전체 안내선 제거</translation>
<translation>현재 페이지에서 전체 안내선 삭제</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="340"/>
<source>Delete Guides from Current &amp;Page</source>
<translation>현재 페이지에서 안내선 제거(&amp;P)</translation>
<translation>현재 페이지에서 안내선 삭제(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="350"/>
<source>Delete all guides from the current document</source>
<translation>현재 문서에서 전체 안내선 제거</translation>
<translation>현재 문서에서 전체 안내선 삭제</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="353"/>
<source>Delete Guides from &amp;All Pages</source>
<translation>전체 문서에서 안내선 제거(&amp;A)</translation>
<translation>전체 페이지에서 안내선 삭제(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="15"/>
11759,181 → 10036,103
<message>
<location filename="../../scribus/guidemanager.cpp" line="253"/>
<source>Add a new horizontal guide</source>
<translation type="unfinished"></translation>
<translation>새 수평 안내선 더하기</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="254"/>
<source>Delete the selected horizontal guide</source>
<translation type="unfinished"></translation>
<translation>선택된 수평 안내선 삭제</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="255"/>
<source>Add a new vertical guide</source>
<translation type="unfinished"></translation>
<translation>새 수직 안내선 더하기</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="256"/>
<source>Delete the selected vertical guide</source>
<translation type="unfinished"></translation>
<translation>선택된 수직 안내선 삭제</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="257"/>
<source>Lock the guides</source>
<translation type="unfinished"></translation>
<translation>안내선 잠금</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="258"/>
<source>Apply to all pages</source>
<translation type="unfinished"></translation>
<translation>전체 페이지에 적용</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="259"/>
<source>Number of horizontal guides to create</source>
<translation type="unfinished"></translation>
<translation>생성할 수평 안내선 갯수</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="260"/>
<source>Number of vertical guides to create</source>
<translation type="unfinished"></translation>
<translation>생성할 수직 안내선 갯수</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="261"/>
<source>Create rows with guides, with an additional gap between the rows</source>
<translation type="unfinished"></translation>
<translation>행 사이 부가적인 간격 가진 안내선 행 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="262"/>
<source>Create columns with guides, with an additional gap between the columns</source>
<translation type="unfinished"></translation>
<translation>열 사이 부가적인 간격 가진 안내선 열 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="263"/>
<source>Create the selected number of horizontal guides relative to the current page</source>
<translation type="unfinished"></translation>
<translation>현재 페이지에 대하여 선택된 수평 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="264"/>
<source>Create the selected number of horizontal guides relative to the current page&apos;s margins</source>
<translation type="unfinished"></translation>
<translation>현재 페이지 여백에 대하여 선택된 수평 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="265"/>
<source>Create the selected number of horizontal guides relative to the current selection of items</source>
<translation type="unfinished"></translation>
<translation>객체의 현재 선택에 대하여 선택된 수평 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="266"/>
<source>Create the selected number of vertical guides relative to the current page</source>
<translation type="unfinished"></translation>
<translation>현재 페이지에 대하여 선택된 수직 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="267"/>
<source>Create the selected number of vertical guides relative to the current page&apos;s margins</source>
<translation type="unfinished"></translation>
<translation>현재 페이지 여백에 대하여 선택된 수직 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="268"/>
<source>Create the selected number of vertical guides relative to the current selection of items</source>
<translation type="unfinished"></translation>
<translation>객체의 현재 선택에 대하여 선택된 수직 안내선 갯수 생성</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="269"/>
<source>Apply the shown guides to all pages in the document</source>
<translation type="unfinished"></translation>
<translation>문서에서 보이는 안내선을 전체 페이지에 적용</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="270"/>
<source>Delete all guides shown on the current page</source>
<translation type="unfinished"></translation>
<translation>현재 페이지상에 나타나는 전체 안내선 삭제</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="271"/>
<source>Delete all guides from all pages</source>
<translation type="unfinished"></translation>
<translation>전체 페이지에서 전체 안내선 삭제</translation>
</message>
</context>
<context>
<name>GuideManagerBase</name>
<message>
<location filename="" line="0"/>
<source>Manage Guides</source>
<translation type="obsolete">안내선 관리</translation>
<location filename="../../scribus/guidemanager.ui" line="275"/>
<source>Refer to</source>
<translation>대상</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Guide</source>
<translation type="obsolete">안내선</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Add</source>
<translation type="obsolete">더하기(&amp;A)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+A</source>
<translation type="obsolete">Alt+A</translation>
</message>
<message>
<location filename="" line="0"/>
<source>D&amp;elete</source>
<translation type="obsolete">삭제(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+E</source>
<translation type="obsolete">Alt+E</translation>
</message>
<message>
<location filename="" line="0"/>
<source>A&amp;dd</source>
<translation type="obsolete">더하기(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+D</source>
<translation type="obsolete">Alt+D</translation>
</message>
<message>
<location filename="" line="0"/>
<source>De&amp;lete</source>
<translation type="obsolete">삭제(&amp;D)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+L</source>
<translation type="obsolete">Alt+L</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Lock Guides</source>
<translation type="obsolete">안내선 잠금(&amp;L)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Appl&amp;y to All Pages</source>
<translation type="obsolete">전체 페이지에 적용(&amp;Y)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+Y</source>
<translation type="obsolete">Alt+Y</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Number:</source>
<translation type="obsolete">번호(&amp;N):</translation>
</message>
<message>
<location filename="" line="0"/>
<source>&amp;Page</source>
<translation type="obsolete">페이지(&amp;P)</translation>
</message>
<message>
<location filename="" line="0"/>
<source>Alt+P</source>
<translation type="obsolete">Alt+P</translation>
</message>
</context>
<context>
<name>HelpBrowser</name>
11955,7 → 10154,7
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="96"/>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
<translation>새로(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="178"/>
11965,7 → 10164,7
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="79"/>
<source>Book&amp;marks</source>
<translation>북마크(&amp;M)</translation>
<translation>책갈피(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="148"/>
11973,16 → 10172,71
<translation>인쇄(&amp;P)...</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="289"/>
<source>&amp;File</source>
<translation>파일(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="158"/>
<source>&amp;Find...</source>
<translation>찾기(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="296"/>
<source>Find &amp;Next</source>
<translation>다음 찾기(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="297"/>
<source>Find &amp;Previous</source>
<translation>이전 찾기(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="290"/>
<source>&amp;Edit</source>
<translation>편집(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="298"/>
<source>&amp;Add Bookmark</source>
<translation>책갈피 더하기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="183"/>
<source>D&amp;elete All</source>
<translation>전체 삭제(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="291"/>
<source>&amp;Bookmarks</source>
<translation>책갈피(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="287"/>
<source>Scribus Online Help</source>
<translation>Scribus 온라인 도움말</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="377"/>
<source>Find</source>
<translation>찾기</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="377"/>
<source>Search Term:</source>
<translation>찾을 내용:</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="409"/>
<source>New Bookmark</source>
<translation>새 책갈피</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="409"/>
<source>New Bookmark&apos;s Title:</source>
<translation>새 책갈피의 제목:</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="137"/>
<source>Scribus Help</source>
<translation>Scribus 도움말</translation>
11990,12 → 10244,12
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="53"/>
<source>Searching is case insensitive</source>
<translation>찾기는 대소문자를 무시</translation>
<translation>찾기는 대소문자를 동일하게 다룹니다</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="86"/>
<source>1</source>
<translation>1</translation>
<translation></translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="153"/>
12018,101 → 10272,23
<translation>더하기(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="287"/>
<source>Scribus Online Help</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="289"/>
<source>&amp;File</source>
<translation type="unfinished">파일(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="290"/>
<source>&amp;Edit</source>
<translation type="unfinished">편집(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="291"/>
<source>&amp;Bookmarks</source>
<translation type="unfinished">북마크(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="294"/>
<source>&amp;Quit</source>
<translation type="unfinished">종료(&amp;Q)</translation>
<translation>종료(&amp;Q)</translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="296"/>
<source>Find &amp;Next</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="297"/>
<source>Find &amp;Previous</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="298"/>
<source>&amp;Add Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="377"/>
<source>Find</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="377"/>
<source>Search Term:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="409"/>
<source>New Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="409"/>
<source>New Bookmark&apos;s Title:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/helpbrowser.cpp" line="715"/>
<source>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</source>
<comment>HTML message for no documentation available to show</comment>
<translation type="unfinished"></translation>
<translation>&lt;h2&gt;&lt;p&gt;죄송합니다, 메뉴얼이 설치되지 않았습니다!&lt;/p&gt;&lt;p&gt;다음을 참고하세요:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;업데이트된 문서를 위하여 http://docs.scribus.net&lt;/li&gt;&lt;li&gt;다운로드를 위하여 http://www.scribus.net &lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</translation>
</message>
</context>
<context>
<name>HelpBrowser2</name>
<message>
<location filename="../ui/hb2.ui" line="30"/>
<source>&amp;Contents</source>
<translation type="obsolete">내용(&amp;C)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="49"/>
<source>Se&amp;arch</source>
<translation type="obsolete">찾기(&amp;S)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="64"/>
<source>&amp;Search</source>
<translation type="obsolete">찾기(&amp;S)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="77"/>
<source>Book&amp;marks</source>
<translation type="obsolete">북마크(&amp;M)</translatio