Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 3 → Rev 2

/trunk/Scribus/admin/config.pl
File deleted
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: new-libtool.m4.in
===================================================================
--- new-libtool.m4.in (revision 3)
+++ new-libtool.m4.in (nonexistent)
@@ -1,868 +0,0 @@
-## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
- [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
- pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_RESTORE])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
- [AC_TRY_LINK([],
- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);],
- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
- case $host/$CC in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin* | *-*-pw32*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
- ;;
- ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-# Where MODE is either `yes' or `no'. If omitted, it defaults to
-# `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- re_direlt=['/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
-else
- lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw* |pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.[012])
- lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
- ;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
- ;;
- esac
- ;;
-
-freebsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
-
-irix5* | irix6*)
- case $host_os in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux*)
- case $host_cpu in
- alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
- else
- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
- fi
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
-
-openbsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case "$host_cpu" in
- i*86 )
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
- changequote([, ])dnl
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-newsos6)
- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
- break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
- break
- else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments. Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!). If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
- [],
- [define([AC_PROVIDE_IFELSE],
- [ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
/new-libtool.m4.in
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: mkinstalldirs
===================================================================
--- mkinstalldirs (revision 3)
+++ mkinstalldirs (nonexistent)
@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-
-for file
-do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here
/mkinstalldirs
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: old-ltconfig
===================================================================
--- old-ltconfig (revision 3)
+++ old-ltconfig (nonexistent)
@@ -1,2796 +0,0 @@
-#! /bin/sh
-
-# ltconfig - Create a system-specific libtool.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A lot of this script is taken from autoconf-2.10.
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-echo=echo
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec "$SHELL" "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# Find the correct PATH separator. Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
- UNAME=${UNAME-`uname 2>/dev/null`}
- case X$UNAME in
- *-DOS) PATH_SEPARATOR=';' ;;
- *) PATH_SEPARATOR=':' ;;
- esac
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running ltconfig again with it.
- ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
-
- export echo_test_string
- exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# The name of this program.
-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-
-# Constants:
-PROGRAM=ltconfig
-PACKAGE=libtool
-VERSION=1.4a
-TIMESTAMP=" (1.641.2.206mm 2001/04/03 21:47:47)"
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-rm="rm -f"
-
-help="Try \`$progname --help' for more information."
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-enable_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-enable_static=yes
-enable_fast_install=yes
-enable_dlopen=unknown
-enable_win32_dll=no
-pic_mode=default
-ltmain=
-silent=
-srcdir=
-ac_config_guess=
-ac_config_sub=
-host=
-build=NONE
-nonopt=NONE
-ofile="$default_ofile"
-verify_host=yes
-tagname=
-with_gcc=no
-with_gnu_ld=no
-need_locks=yes
-ac_ext=c
-libext=a
-cache_file=
-max_cmd_len=
-
-## Dependencies to place before and after the object being linked:
-predep_objects=
-postdep_objects=
-predeps=
-postdeps=
-compiler_lib_search_path=
-
-## Link characteristics:
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-striplib=
-old_striplib=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced. Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-## Tools:
-old_AR="$AR"
-old_AR_FLAGS="$AR_FLAGS"
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-old_CPPFLAGS="$CPPFLAGS"
-old_LDFLAGS="$LDFLAGS"
-old_LIBS="$LIBS"
-old_MAGIC_CMD="$MAGIC_CMD"
-old_LD="$LD"
-old_LN_S="$LN_S"
-old_LTCC="$LTCC"
-old_NM="$NM"
-old_RANLIB="$RANLIB"
-old_STRIP="$STRIP"
-old_AS="$AS"
-old_DLLTOOL="$DLLTOOL"
-old_OBJDUMP="$OBJDUMP"
-old_OBJEXT="$OBJEXT"
-old_EXEEXT="$EXEEXT"
-old_reload_flag="$reload_flag"
-old_deplibs_check_method="$deplibs_check_method"
-old_file_magic_cmd="$file_magic_cmd"
-
-# Parse the command line options.
-args=
-prev=
-for option
-do
- case $option in
- -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- eval "$prev=\$option"
- prev=
- continue
- fi
-
- case $option in
- --help) cat <<EOM
-Usage: $progname [OPTION]... LTMAIN [HOST]
-
-Generate a system-specific libtool script.
-
- --build configure for building on BUILD [BUILD=HOST]
- --debug enable verbose shell tracing
- --disable-shared do not build shared libraries
- --disable-static do not build static libraries
- --disable-fast-install do not optimize for fast installation
- --enable-dlopen enable dlopen support
- --enable-win32-dll enable building dlls on win32 hosts
- --help display this help and exit
- --no-verify do not verify that HOST is a valid host type
--o, --output=FILE specify the output file [default=$default_ofile]
- --quiet same as \`--silent'
- --silent do not print informational messages
- --srcdir=DIR find \`config.guess' in DIR
- --version output version information and exit
- --add-tag=TAG append an alternate configuration
- --with-gcc assume that the GNU C compiler will be used
- --with-gnu-ld assume that the C compiler uses the GNU linker
- --prefer-pic try to use only PIC objects
- --prefer-non-pic try to use only non-PIC objects
- --disable-lock disable file locking
- --cache-file=FILE configure cache file
-
-LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
-that provides basic libtool functionality.
-
-HOST is the canonical host system name [default=guessed].
-EOM
- exit 0
- ;;
-
- --build) prev=build ;;
- --build=*) build="$optarg" ;;
-
- --debug)
- echo "$progname: enabling shell trace mode"
- set -x
- ;;
-
- --disable-shared) enable_shared=no ;;
-
- --disable-static) enable_static=no ;;
-
- --disable-fast-install) enable_fast_install=no ;;
-
- --enable-dlopen) enable_dlopen=yes ;;
-
- --enable-win32-dll) enable_win32_dll=yes ;;
-
- --quiet | --silent) silent=yes ;;
-
- --srcdir) prev=srcdir ;;
- --srcdir=*) srcdir="$optarg" ;;
-
- --no-verify) verify_host=no ;;
-
- --output | -o) prev=ofile ;;
- --output=*) ofile="$optarg" ;;
-
- --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
-
- --add-tag) prev=tagname ;;
- --add-tag=*) tagname="$optarg" ;;
-
- --with-gcc) with_gcc=yes ;;
- --with-gnu-ld) with_gnu_ld=yes ;;
-
- --prefer-pic) pic_mode=yes ;;
- --prefer-non-pic) pic_mode=no ;;
-
- --disable-lock) need_locks=no ;;
-
- --cache-file=*) cache_file="$optarg" ;;
-
- -*)
- echo "$progname: unrecognized option \`$option'" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- if test -z "$ltmain"; then
- ltmain="$option"
- elif test -z "$host"; then
-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-# echo "$progname: warning \`$option' is not a valid host type" 1>&2
-# fi
- host="$option"
- else
- echo "$progname: too many arguments" 1>&2
- echo "$help" 1>&2
- exit 1
- fi ;;
- esac
-done
-
-if test -z "$ltmain"; then
- echo "$progname: you must specify a LTMAIN file" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-if test ! -f "$ltmain"; then
- echo "$progname: \`$ltmain' does not exist" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-if test -n "$tagname"; then
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in
- "") ;;
- *)
- echo "$progname: invalid tag name: $tagname" 1>&2
- exit 1
- ;;
- esac
-
- if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then
- echo "$progname: tag name $tagname already exists" 1>&2
- exit 1
- fi
-
- if test ! -f "$ofile"; then
- echo "$progname: warning: output file \`$ofile' does not exist" 1>&2
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL $ofile --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2
- else
- echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2
- fi
- fi
-fi
-
-# Quote any args containing shell metacharacters.
-ltconfig_args=
-for arg
-do
- case $arg in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ltconfig_args="$ltconfig_args '$arg'" ;;
- *) ltconfig_args="$ltconfig_args $arg" ;;
- esac
-done
-
-# A relevant subset of AC_INIT.
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>>./config.log
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
-if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi
-
-if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then
- echo "loading cache $cache_file within ltconfig"
- . $cache_file
-fi
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-if test -z "$srcdir"; then
- # Assume the source directory is the same one as the path to LTMAIN.
- srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
- test "$srcdir" = "$ltmain" && srcdir=.
-fi
-
-trap "$rm conftest*; exit 1" 1 2 15
-if test "$verify_host" = yes; then
- # Check for config.guess and config.sub.
- ac_aux_dir=
- for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/config.guess; then
- ac_aux_dir=$ac_dir
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
- echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
- echo "$help" 1>&2
- exit 1
- fi
- ac_config_guess=$ac_aux_dir/config.guess
- ac_config_sub=$ac_aux_dir/config.sub
-
- # Make sure we can run config.sub.
- if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
- else
- echo "$progname: cannot run $ac_config_sub" 1>&2
- echo "$help" 1>&2
- exit 1
- fi
-
- echo $ac_n "checking host system type""... $ac_c" 1>&6
-
- host_alias=$host
- case $host_alias in
- "")
- # Force config.guess to use the C compiler.
- # CC_FOR_BUILD overrides the CC variable in config.guess but I had
- # problems with it so do it this way for now.
- CC="$LTCC"
-
- if host_alias=`$SHELL $ac_config_guess`; then :
- else
- echo "$progname: cannot guess host type; you must specify one" 1>&2
- echo "$help" 1>&2
- exit 1
- fi
-
- # Restore the C compiler.
- CC="$old_CC"
- ;;
- esac
- host=`$SHELL $ac_config_sub $host_alias`
- echo "$ac_t$host" 1>&6
-
- # Make sure the host verified.
- test -z "$host" && exit 1
-
- # Check for the build system type
- echo $ac_n "checking build system type... $ac_c" 1>&6
-
- build_alias=$build
- case $build_alias in
- NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
- esac
-
- build=`$SHELL $ac_config_sub $build_alias`
- build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- echo "$ac_t""$build" 1>&6
-
-elif test -z "$host"; then
- echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
- echo "$help" 1>&2
- exit 1
-else
- host_alias=$host
- build_alias=$host_alias
- build=$host
-fi
-
-if test x"$host" != x"$build"; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
-
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-fi
-
-# Source the script associated with the $tagname tag configuration.
-if test -n "$tagname"; then
- . $ltmain
-else
- # FIXME: We should use a variable here
- # Configure for a C compiler
- . $srcdir/ltcf-c.sh
-fi
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$objext" && objext=o
-
-echo $ac_n "checking for objdir... $ac_c" 1>&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$ac_t$objdir" 1>&6
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-# We assume here that the value for ac_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-echo "$progname:678:checking for $compiler option to produce PIC" 1>&5
-
-if test -z "$ac_cv_prog_cc_pic"; then
- echo "$ac_t"none 1>&6
-else
- echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6
-
- # Check to make sure the pic_flag actually works.
- echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6
- echo "$progname:687:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5
- if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \
- test "X${ac_cv_prog_cc_pic_works}" != X; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_cv_prog_cc_pic_works=yes
- $rm conftest*
- echo $lt_simple_compile_test_code > conftest.$ac_ext
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC"
- if { (eval echo $progname:697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
-
- case $host_os in
- hpux9* | hpux10* | hpux11*)
- # On HP-UX, both CC and GCC only warn that PIC is supported... then
- # they create non-PIC objects. So, if there were any warnings, we
- # assume that PIC is not supported.
- if test -s conftest.err; then
- ac_cv_prog_cc_pic_works=no
- ac_cv_prog_cc_can_build_shared=no
- ac_cv_prog_cc_pic=
- else
- ac_cv_prog_cc_pic_works=yes
- ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
- fi
- ;;
- *)
- ac_cv_prog_cc_pic_works=yes
- ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
- ;;
- esac
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- ac_cv_prog_cc_pic_works=no
- ac_cv_prog_cc_can_build_shared=no
- ac_cv_prog_cc_pic=
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
- fi
- # Belt *and* braces to stop my trousers falling down:
- if test "X$ac_cv_prog_cc_pic_works" = Xno; then
- ac_cv_prog_cc_pic=
- ac_cv_prog_cc_can_build_shared=no
- fi
- echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$ac_cv_prog_cc_shlib"; then
- echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2
- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$ac_cv_prog_cc_shlib[ ]" >/dev/null; then :
- else
- echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
- ac_cv_prog_cc_can_build_shared=no
- fi
-fi
-
-echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6
-echo "$progname:749: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5
-if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \
- test "X${ac_cv_prog_cc_static_works}" != X; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- $rm conftest*
- echo $lt_simple_link_test_code > conftest.$ac_ext
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static"
- if { (eval echo $progname:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_static_works=yes
- else
- ac_cv_prog_cc_static_works=no
- ac_cv_prog_cc_static=
- fi
- LDFLAGS="$save_LDFLAGS"
- $rm conftest*
-fi
-# Belt *and* braces to stop my trousers falling down:
-if test "X$ac_cv_prog_cc_static_works" = Xno; then
- ac_cv_prog_cc_static=
-fi
-echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6
-pic_flag="$ac_cv_prog_cc_pic"
-special_shlib_compile_flags="$ac_cv_prog_cc_shlib"
-wl="$ac_cv_prog_cc_wl"
-link_static_flag="$ac_cv_prog_cc_static"
-no_builtin_flag="$ac_cv_prog_cc_no_builtin"
-can_build_shared="$ac_cv_prog_cc_can_build_shared"
-
-# find the maximum length of command line arguments
-echo "$progname:780: finding the maximum length of command line arguments" 1>&5
-echo $ac_n "finding the maximum length of command line arguments... $ac_c" 1>&6
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- i=0
- testring="ABCDEF"
- while test `$CONFIG_SHELL $0 --fallback-echo "X$testring" >/dev/null 2>&1` == `echo "X$testring" >/dev/null 2>&1` &&
- new_result=`expr "X$testring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 32 # 1 MB should be enough
- do
- i=`expr $i + 1`
- testring=$testring$testring
- done
- testring=
- # add a significant safety factor because C++ compilers can tack on massive amounts
- # of additional arguments before passing them to the linker. 1/4 should be good.
- len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len`
-fi
-echo "$progname:@lineno@: result: $lt_cv_sys_max_cmd_len" 1>&5
-echo "${ac_t}$lt_cv_sys_max_cmd_len" 1>&6
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- max_cmd_len=$lt_cv_sys_max_cmd_len
-else
- max_cmd_len=none
-fi
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6
-if test "${lt_cv_compiler_c_o+set}" = set; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- $rm conftest*
- echo $lt_simple_compile_test_code > conftest.$ac_ext
- mkdir out
- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
- # that will create temporary files in the current directory regardless of
- # the output directory. Thus, making CWD read-only will cause this test
- # to fail, enabling locking or at least warning the user not to do parallel
- # builds.
- chmod -w .
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -o out/conftest2.$objext"
- echo "$progname:829: checking if $compiler supports -c -o file.$objext" >&5
- if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then
-
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s out/conftest.err; then
- lt_cv_compiler_c_o=no
- else
- lt_cv_compiler_c_o=yes
- fi
- else
- # Append any errors to the config.log.
- cat out/conftest.err 1>&5
- lt_cv_compiler_c_o=no
- fi
- CFLAGS="$save_CFLAGS"
- chmod u+w .
- $rm conftest* out/*
- rmdir out
- cd ..
- rmdir conftest
- $rm -r conftest 2>/dev/null
-fi
-compiler_c_o=$lt_cv_compiler_c_o
-echo "${ac_t}$compiler_c_o" 1>&6
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- echo "$ac_t$hard_links" 1>&6
- $rm conftest*
- if test "$hard_links" = no; then
- echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-if test "$with_gcc" = yes; then
- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
- $rm conftest*
- echo $lt_simple_compile_test_code > conftest.$ac_ext
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
- echo "$progname:883: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
- if { (eval echo $progname:884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
-
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- echo "$ac_t"no 1>&6
- compiler_rtti_exceptions=no
- else
- echo "$ac_t"yes 1>&6
- compiler_rtti_exceptions=yes
- fi
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- compiler_rtti_exceptions=no
- echo "$ac_t"no 1>&6
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
-
- if test "$compiler_rtti_exceptions" = "yes"; then
- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
- else
- no_builtin_flag=' -fno-builtin'
- fi
-
-fi
-
-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-
-echo "$ac_t$ld_shlibs" 1>&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$hardcode_shlibpath_var" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-echo "$ac_t$hardcode_action" 1>&6
-
-echo $ac_n "checking whether stripping libraries is possible... $ac_c" 1>&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- echo "${ac_t}yes" 1>&6
-else
- echo "${ac_t}no" 1>&6
-fi
-
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-# PORTME Fill in your ld.so characteristics
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so$major'
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- # We preserve .a as extension for shared libraries though AIX4.2
- # and later linker supports .so
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
- # lib<name>.a to let people know that these are not typical AIX shared libraries.
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- # We want symlinks to be created for the different names.
- version_type=linux
- else
- # We preserve .a as extension for shared libraries though AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}.so$major.o'
- fi
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- shlibpath_var=LIBPATH
- deplibs_check_method=pass_all
- # Put the right runpath into libraries.
- hardcode_into_libs=yes
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- can_build_shared=no
- fi
- ;;
- esac
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}.so'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
-bsdi4*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- export_dynamic_flag_spec=-rdynamic
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- need_version=no
- need_lib_prefix=no
- case $with_gcc,$host_os in
- yes,cygwin*)
- library_names_spec='$libname.dll.a'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog .libs/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll; $rm \$dlpath'
- ;;
- yes,mingw*)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
- ;;
- yes,pw32*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-;;
- *)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}.`test .$module = .yes && echo so || echo dylib` ${libname}${release}${major}.$`test .$module = .yes && echo so || echo dylib` ${libname}.`test .$module = .yes && echo so || echo dylib`'
- soname_spec='${libname}${release}${major}.`test .$module = .yes && echo so || echo dylib`'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- *)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- dynamic_linker="$host_os dld.sl"
- version_type=sunos
- hardcode_into_libs=all
- need_lib_prefix=no
- need_version=no
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
- soname_spec='${libname}${release}.sl$major'
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-irix5* | irix6*)
- version_type=irix
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
- case $host_os in
- irix5*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- need_version=yes
- else
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- need_version=no
- fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- # OpenBSD 2.7 the overriding is needed for fast-install
- shlibpath_overrides_runpath=yes
- ;;
-
-os2*)
- libname_spec='$name'
- need_lib_prefix=no
- library_names_spec='$libname.dll $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- hardcode_into_libs=yes
- ;;
-
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
- soname_spec='$libname.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-echo "$ac_t$dynamic_linker" 1>&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- symcode='[BCDEGRST]'
- ;;
-solaris* | sysv5*)
- symcode='[BDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Write the raw and C identifiers.
-global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
- $rm conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- echo "$progname:1423: checking if global_symbol_pipe works" >&5
- if { (eval echo $progname:1424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { echo "$progname:1427: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$objext conftstm.$objext
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo $progname:1479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- pipe_works=yes
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- LIBS="$save_LIBS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- $rm conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- global_symbol_pipe=
- fi
-done
-if test "$pipe_works" = yes; then
- echo "${ac_t}ok" 1>&6
-else
- echo "${ac_t}failed" 1>&6
-fi
-
-if test -z "$global_symbol_pipe"; then
- global_symbol_to_cdecl=
-fi
-
-# Report the final consequences.
-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-
-# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
-# configure.in, otherwise build static only libraries.
-case $host_os in
-cygwin* | mingw* | pw32* | os2*)
- if test x$can_build_shared = xyes; then
- test x$enable_win32_dll = xno && can_build_shared=no
- echo "checking if package supports dlls... $can_build_shared" 1>&6
- fi
-;;
-esac
-
-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- test "$enable_shared" = yes && enable_static=no
- ;;
-esac
-
-echo "$ac_t$enable_shared" 1>&6
-
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-
-echo "checking whether to build static libraries... $enable_static" 1>&6
-
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$with_gcc" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-# Check whether we must set pic_mode to default
-test -z "$pic_flag" && pic_mode=default
-
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
-if test "X${lt_cv_dlopen+set}" != Xset; then
- lt_cv_dlopen=no lt_cv_dlopen_libs=
-echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:1583: checking for dlopen in -ldl" >&5
-if test "X${ac_cv_lib_dl_dlopen+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldl $LIBS"
-cat > conftest.$ac_ext <<EOF
-/*#line 1590 "ltconfig"*/
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo $progname:1603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if test "X$ac_cv_lib_dl_dlopen" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:1622: checking for dlopen" >&5
-if test "X${ac_cv_func_dlopen+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-/*#line 1627 "ltconfig"*/
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-dlopen();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:1652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_dlopen=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_dlopen=no
-fi
-rm -f conftest*
-fi
-if test "X$ac_cv_func_dlopen" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dlopen"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
-echo "$progname:1669: checking for dlopen in -lsvld" >&5
-if test "X${ac_cv_lib_svld_dlopen+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lsvld $LIBS"
-cat > conftest.$ac_ext <<EOF
-/*#line 1676 "ltconfig"*/
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo $progname:1689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_lib_svld_dlopen=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if test "X$ac_cv_lib_svld_dlopen" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:1708: checking for dld_link in -ldld" >&5
-if test "X${ac_cv_lib_dld_dld_link+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldld $LIBS"
-cat > conftest.$ac_ext <<EOF
-/*#line 1715 "ltconfig"*/
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link();
-
-int main() {
-dld_link()
-; return 0; }
-EOF
-if { (eval echo $progname:1728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_lib_dld_dld_link=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if test "X$ac_cv_lib_dld_dld_link" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:1747: checking for shl_load" >&5
-if test "X${ac_cv_func_shl_load+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-/*#line 1752 "ltconfig"*/
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-shl_load();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:1777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_shl_load=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_shl_load=no
-fi
-rm -f conftest*
-fi
-
-if test "X$ac_cv_func_shl_load" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="shl_load"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "$progname:1795: checking for shl_load in -ldld" >&5
-if test "X${ac_cv_lib_dld_shl_load+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldld $LIBS"
-cat > conftest.$ac_ext <<EOF
-/*#line 1802 "ltconfig"*/
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-shl_load()
-; return 0; }
-EOF
-if { (eval echo $progname:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_lib_dld_shl_load=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if test "X$ac_cv_lib_dld_shl_load" = Xyes; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-fi
-
-fi
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
-for ac_hdr in dlfcn.h; do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:1863: checking for $ac_hdr" >&5
-if eval "test \"`echo 'X$''{'ac_cv_header_$ac_safe'+set}'`\" = Xset"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-/*#line 1868 "ltconfig"*/
-#include <$ac_hdr>
-int fnord = 0;
-int main () { return(0); }
-EOF
-ac_try="$ac_compile >/dev/null 2>conftest.out"
-{ (eval echo $progname:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
- if test "x$ac_cv_header_dlfcn_h" = xyes; then
- CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- fi
- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:1902: checking whether a program can dlopen itself" >&5
-if test "X${lt_cv_dlopen_self+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- lt_cv_dlopen_self=cross
- else
- cat > conftest.$ac_ext <<EOF
-/*#line 1910 "ltconfig"*/
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LTDL_GLOBAL DL_GLOBAL
-# else
-# define LTDL_GLOBAL 0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LTDL_LAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LTDL_LAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LTDL_LAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LTDL_LAZY_OR_NOW DL_NOW
-# else
-# define LTDL_LAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-void fnord() { int i=42; }
-int main() {
- void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1;}
-
-EOF
-if { (eval echo $progname:1957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- lt_cv_dlopen_self=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- lt_cv_dlopen_self=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
-
- if test "$lt_cv_dlopen_self" = yes; then
- LDFLAGS="$LDFLAGS $link_static_flag"
- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:1976: checking whether a statically linked program can dlopen itself" >&5
-if test "X${lt_cv_dlopen_self_static+set}" = Xset; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- lt_cv_dlopen_self_static=cross
- else
- cat > conftest.$ac_ext <<EOF
-/*#line 1984 "ltconfig"*/
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LTDL_GLOBAL DL_GLOBAL
-# else
-# define LTDL_GLOBAL 0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LTDL_LAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LTDL_LAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LTDL_LAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LTDL_LAZY_OR_NOW DL_NOW
-# else
-# define LTDL_LAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-void fnord() { int i=42; }
-int main() {
- void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1; }
-
-EOF
-if { (eval echo $progname:2031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- lt_cv_dlopen_self_static=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- lt_cv_dlopen_self_static=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
-fi
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-# Copy echo and quote the copy, instead of the original, because it is
-# used later.
-ltecho="$echo"
-if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ltecho="$CONFIG_SHELL \$0 --fallback-echo"
-fi
-LTSHELL="$SHELL"
-
-LTCONFIG_VERSION="$VERSION"
-
-# Only quote variables if we're using ltmain.sh.
-case $ltmain in
-*.sh)
- # Now quote all the things that may contain metacharacters.
- for var in ltecho old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
- old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
- old_LN_S old_NM old_RANLIB old_STRIP \
- old_AS old_DLLTOOL old_OBJDUMP \
- old_OBJEXT old_EXEEXT old_reload_flag \
- old_deplibs_check_method old_file_magic_cmd \
- AR AR_FLAGS CC LTCC LD LN_S NM LTSHELL LTCONFIG_VERSION \
- reload_flag reload_cmds wl \
- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
- thread_safe_flag_spec whole_archive_flag_spec libname_spec \
- library_names_spec soname_spec \
- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
- postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
- predep_objects postdep_objects predeps postdeps compiler_lib_search_path \
- old_striplib striplib file_magic_cmd export_symbols_cmds \
- deplibs_check_method allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
- hardcode_libdir_flag_spec hardcode_libdir_separator \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- compiler_c_o need_locks exclude_expsyms include_expsyms; do
-
- case $var in
- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
- extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ### testsuite: skip nested quoting test
- ;;
- *)
- eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ### testsuite: skip nested quoting test
- ;;
- esac
- done
-
- case $ltecho in
- *'\$0 --fallback-echo"')
- ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
- if test -z "$tagname"; then
- trap "$rm \"$ofile\"; exit 1" 1 2 15
- echo "creating $ofile"
- $rm "$ofile"
- cat <<EOF > "$ofile"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-### BEGIN LIBTOOL CONFIG
-EOF
- else
- echo "appending configuration tag \"$tagname\" to $ofile"
- echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
- fi
- cfgfile="$ofile"
- ;;
-
-*)
- # Double-quote the variables that need it (for aesthetics).
- for var in old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
- old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
- old_LN_S old_NM old_RANLIB old_STRIP \
- old_AS old_DLLTOOL old_OBJDUMP \
- old_OBJEXT old_EXEEXT old_reload_flag \
- old_deplibs_check_method old_file_magic_cmd; do
- eval "$var=\\\"\$var\\\""
- done
-
- # Just create a config file.
- cfgfile="$ofile.cfg"
- if test -z "$tagname"; then
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- echo "creating $cfgfile"
- $rm "$cfgfile"
- cat <<EOF > "$cfgfile"
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-
-### BEGIN LIBTOOL CONFIG
-EOF
- else
- echo "appending to $cfgfile"
- echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
- fi
- ;;
-esac
-
-cat <<EOF >> "$cfgfile"
-# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# AR=$old_AR AR_FLAGS=$old_AR_FLAGS LTCC=$old_LTCC CC=$old_CC \\
-# CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-# MAGIC_CMD=$old_MAGIC_CMD LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
-# LN_S=$old_LN_S NM=$old_NM RANLIB=$old_RANLIB STRIP=$old_STRIP \\
-# AS=$old_AS DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP \\
-# objext=$old_OBJEXT exeext=$old_EXEEXT reload_flag=$old_reload_flag \\
-# deplibs_check_method=$old_deplibs_check_method \\
-# file_magic_cmd=$old_file_magic_cmd \\
-# $0$ltconfig_args
-#
-# Compiler and other test output produced by $progname, useful for
-# debugging $progname, is in ./config.log if it exists.
-
-# The version of $progname that generated this script.
-LTCONFIG_VERSION=$LTCONFIG_VERSION
-
-# Shell to use when invoking shell scripts.
-SHELL=$LTSHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$ltecho
-
-# The archiver.
-AR=$AR
-AR_FLAGS=$AR_FLAGS
-
-# A C compiler.
-LTCC=$LTCC
-
-# A language-specific compiler.
-CC=$CC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$with_gcc
-
-# The linker used to build libraries.
-LD=$LD
-
-# Whether we need hard or soft links.
-LN_S=$LN_S
-
-# A BSD-compatible nm program.
-NM=$NM
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$reload_flag
-reload_cmds=$reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$wl
-
-# Object file suffix (normally "o").
-objext="$objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$pic_flag
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$compiler_c_o
-
-# Must we lock files when doing compilation ?
-need_locks=$need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$RANLIB
-old_archive_cmds=$old_archive_cmds
-old_postinstall_cmds=$old_postinstall_cmds
-old_postuninstall_cmds=$old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$archive_cmds
-archive_expsym_cmds=$archive_expsym_cmds
-postinstall_cmds=$postinstall_cmds
-postuninstall_cmds=$postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$old_striplib
-striplib=$striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$global_symbol_to_cdecl
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$include_expsyms
-
-EOF
-
-if test -z "$tagname"; then
- echo '### END LIBTOOL CONFIG' >> "$ofile"
-else
- echo "### END LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
-fi
-
-case $ltmain in
-*.sh)
- echo >> "$ofile"
- if test -z "$tagname"; then
- case $host_os in
- aix3*)
- cat <<\EOF >> "$ofile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- cat <<'EOF' >> "$ofile"
- # This is a source program that is used to create dlls on Windows
- # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
- # This is a source program that is used to create import libraries
- # on Windows for dlls which lack them. Don't remove nor modify the
- # starting and closing comments
-# /* impgen.c starts here */
-# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-# This file is part of GNU libtool.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# */
-#
-# #include <stdio.h> /* for printf() */
-# #include <unistd.h> /* for open(), lseek(), read() */
-# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
-# #include <string.h> /* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[2];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 2);
-# return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[4];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 4);
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-# void *ptr;
-# {
-# unsigned char *b = ptr;
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-# int argc;
-# char *argv[];
-# {
-# int dll;
-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-# unsigned long export_rva, export_size, nsections, secptr, expptr;
-# unsigned long name_rvas, nexp;
-# unsigned char *expdata, *erva;
-# char *filename, *dll_name;
-#
-# filename = argv[1];
-#
-# dll = open(filename, O_RDONLY|O_BINARY);
-# if (dll < 1)
-# return 1;
-#
-# dll_name = filename;
-#
-# for (i=0; filename[i]; i++)
-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
-# dll_name = filename + i +1;
-#
-# pe_header_offset = pe_get32 (dll, 0x3c);
-# opthdr_ofs = pe_header_offset + 4 + 20;
-# num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-# if (num_entries < 1) /* no exports */
-# return 1;
-#
-# export_rva = pe_get32 (dll, opthdr_ofs + 96);
-# export_size = pe_get32 (dll, opthdr_ofs + 100);
-# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-# secptr = (pe_header_offset + 4 + 20 +
-# pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-# expptr = 0;
-# for (i = 0; i < nsections; i++)
-# {
-# char sname[8];
-# unsigned long secptr1 = secptr + 40 * i;
-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# lseek(dll, secptr1, SEEK_SET);
-# read(dll, sname, 8);
-# if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# {
-# expptr = fptr + (export_rva - vaddr);
-# if (export_rva + export_size > vaddr + vsize)
-# export_size = vsize - (export_rva - vaddr);
-# break;
-# }
-# }
-#
-# expdata = (unsigned char*)malloc(export_size);
-# lseek (dll, expptr, SEEK_SET);
-# read (dll, expdata, export_size);
-# erva = expdata - export_rva;
-#
-# nexp = pe_as32 (expdata+24);
-# name_rvas = pe_as32 (expdata+32);
-#
-# printf ("EXPORTS\n");
-# for (i = 0; i<nexp; i++)
-# {
-# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-# }
-#
-# return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
- ;;
- esac
-
-
- # Append the ltmain.sh script.
- sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-
- chmod +x "$ofile"
- fi
- ;;
-
-*)
- # Compile the libtool program.
- echo "FIXME: would compile $ltmain"
- ;;
-esac
-
-# Update the list of available tags.
-if test -n "$tagname"; then
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" $ofile | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- # Append the new tag name to the list of available tags.
- available_tags="$available_tags $tagname"
-
- # Now substitute the updated of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' ${ofile} > ${ofile}.new"; then
- mv ${ofile}.new ${ofile}
- chmod +x "$ofile"
- else
- rm -f ${ofile}.new
- echo "$progname: unable to update list of available tagged configurations."
- exit 1
- fi
-fi
-
-# Don't cache tagged configuration!
-test -n "$cache_file" && test -z "$tagname" || exit 0
-
-# AC_CACHE_SAVE
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
/old-ltconfig
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: ltcf-c.sh
===================================================================
--- ltcf-c.sh (revision 3)
+++ ltcf-c.sh (nonexistent)
@@ -1,815 +0,0 @@
-#### This script is meant to be sourced by ltconfig.
-
-# ltcf-c.sh - Create a C compiler specific configuration
-#
-# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-## Linker Characteristics
-case $host_os in
-cygwin* | mingw*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$with_gcc" != yes; then
- with_gnu_ld=no
- fi
- ;;
-
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX, the GNU linker is very broken
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=yes
-
- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
- test -f $output_objdir/impgen.exe || (cd $output_objdir && \
- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
- else $CC -o impgen impgen.c ; fi)~
- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
- # cygwin and mingw dlls have different entry points and sets of symbols
- # to exclude.
- # FIXME: what about values for MSVC?
- dll_entry=__cygwin_dll_entry@12
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
- case $host_os in
- mingw*)
- # mingw values
- dll_entry=_DllMainCRTStartup@12
- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
- ;;
- esac
-
- # mingw and cygwin differ, and it's simplest to just exclude the union
- # of the two symbol sets.
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
- ltdll_cmds=
- fi
-
- # Extract the symbol export list from an `--export-all' def file,
- # then regenerate the def file from the symbol export list, so that
- # the compiled dll only exports the symbol export list.
- # Be careful not to strip the DATA tag left be newer dlltools.
- export_symbols_cmds="$ltdll_cmds"'
- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname-def;
- else
- echo EXPORTS > $output_objdir/$soname-def;
- _lt_hint=1;
- cat $export_symbols | while read symbol; do
- set dummy \$symbol;
- case \[$]# in
- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
- esac;
- _lt_hint=`expr 1 + \$_lt_hint`;
- done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
- ;;
-
- darwin* | rhapsody*)
- allow_undefined_flag='-undefined suppress'
- archive_cmds='$CC `test .$module = .yes && echo -bundle || echo -dynamiclib` $allow_undefined_flag -o $lib $libobjs $deplibs $linkopts -install_name $rpath/$soname `test -n "$verstring" -a x$verstring != x0.0 && echo $verstring`'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- whole_archive_flag_spec='-all_load $convenience'
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- case "$host_os" in
- freebsd*)
- skip_need_lc_check=yes
- ;;
- esac
-
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- case $host_os in
- cygwin* | mingw*)
- # dlltool doesn't understand --whole-archive et. al.
- whole_archive_flag_spec=
- ;;
- *)
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- ;;
- esac
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$with_gcc" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- if test "$with_gcc" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- esac
- shared_flag='-shared'
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
-
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # KDE requires run time linking. Make it the default.
- aix_use_runtimelinking=yes
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
- # Let the compiler handle the export list.
- always_export_symbols=no
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other run time loading flags (-brtl), -berok will
- # link without error, but may produce a broken library.
- allow_undefined_flag=' ${wl}-berok'
- # The following three lines along with hardcode_into_libs=yes put the correct path into libraries.
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib'
- archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib'
- archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' -o $lib'
- archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
- else
- allow_undefined_flag=' ${wl}-berok'
- # -bexpall does not export symbols beginning with underscore (_)
- always_export_symbols=yes
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec=' '
- build_libtool_need_lc=yes
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
- # This is similar to how AIX traditionally builds it's shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- cygwin* | mingw*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- skip_need_lc_check=yes
- ;;
-
- hpux9* | hpux10* | hpux11*)
- case $host_os in
- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
- esac
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_minus_L=yes # Not in the search PATH, but as the default
- # location of the library.
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6*)
- if test "$with_gcc" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec='-rpath $libdir'
- hardcode_libdir_separator=:
- ;;
-
- sco3.2v5*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv5*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec=
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4.2uw2*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
-
- unixware7*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-## Compiler Characteristics: PIC flags, static flags, etc
-if test "X${ac_cv_prog_cc_pic+set}" = Xset; then
- :
-else
- ac_cv_prog_cc_pic=
- ac_cv_prog_cc_shlib=
- ac_cv_prog_cc_wl=
- ac_cv_prog_cc_static=
- ac_cv_prog_cc_no_builtin=
- ac_cv_prog_cc_can_build_shared=$can_build_shared
-
- if test "$with_gcc" = yes; then
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_cv_prog_cc_static='-Bstatic'
- else
- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- cygwin* | mingw* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- ac_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_cv_prog_cc_pic='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- ac_cv_prog_cc_pic=
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ac_cv_prog_cc_pic=-Kconform_pic
- fi
- ;;
- *)
- ac_cv_prog_cc_pic='-fPIC'
- ;;
- esac
- else
- # PORTME Check for PIC flags for the system compiler.
- case $host_os in
- aix*)
- # All AIX code is PIC.
- ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
- ;;
-
- hpux9* | hpux10* | hpux11*)
- # Is there a better ac_cv_prog_cc_static that works with the bundled CC?
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
- ac_cv_prog_cc_pic='+Z'
- ;;
-
- irix5* | irix6*)
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static='-non_shared'
- # PIC (with -KPIC) is the default.
- ;;
-
- cygwin* | mingw* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- ac_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
-
- linux*)
- case "$CC" in
- ccc*)
- # Compaq C
- # It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- ac_cv_prog_cc_static='-non_shared'
- ;;
- KCC*)
- # KAI C++
- ac_cv_prog_cc_pic='-fPIC'
- ac_cv_prog_cc_wl='--backend -Wl,'
- ac_cv_prog_cc_static='-Bstatic'
- ;;
- *)
- ;;
- esac
- ;;
-
- newsos6)
- ac_cv_prog_cc_pic='-KPIC'
- ac_cv_prog_cc_static='-Bstatic'
- ;;
-
- osf3* | osf4* | osf5*)
- # All OSF/1 code is PIC.
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static='-non_shared'
- ;;
-
- sco3.2v5*)
- ac_cv_prog_cc_pic='-Kpic'
- ac_cv_prog_cc_static='-dn'
- ac_cv_prog_cc_shlib='-belf'
- ;;
-
- solaris*)
- ac_cv_prog_cc_pic='-KPIC'
- ac_cv_prog_cc_static='-Bstatic'
- ac_cv_prog_cc_wl='-Wl,'
- ;;
-
- sunos4*)
- ac_cv_prog_cc_pic='-PIC'
- ac_cv_prog_cc_static='-Bstatic'
- ac_cv_prog_cc_wl='-Qoption ld '
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- ac_cv_prog_cc_pic='-KPIC'
- ac_cv_prog_cc_static='-Bstatic'
- ac_cv_prog_cc_wl='-Wl,'
- ;;
-
- uts4*)
- ac_cv_prog_cc_pic='-pic'
- ac_cv_prog_cc_static='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- ac_cv_prog_cc_pic='-Kconform_pic'
- ac_cv_prog_cc_static='-Bstatic'
- fi
- ;;
-
- *)
- ac_cv_prog_cc_can_build_shared=no
- ;;
- esac
- fi
- case "$host_os" in
- # Platforms which do not suport PIC and -DPIC is meaningless
- # on them:
- *djgpp*)
- ac_cv_prog_cc_pic=
- ;;
- *)
- ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
- ;;
- esac
-fi
-
-need_lc=yes
-if test "$enable_shared" = yes && test "$with_gcc" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- echo $ac_n "checking whether -lc should be explicitly linked in... $ac_c" 1>&6
- if eval "test \"`echo '$''{'ac_cv_archive_cmds_needs_lc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- need_lc=$ac_cv_archive_cmds_needs_lc
- elif test "x$skip_need_lc_check" = "xyes" ; then
- echo $ac_n "(skipping, using no) $ac_c" 1>&6
- need_lc=no
- else
- $rm conftest*
- echo "static int dummy;" > conftest.$ac_ext
- if { (eval echo ltcf-c.sh:need_lc: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$ac_cv_prog_cc_wl
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { (eval echo ltcf-c.sh:need_lc: \"$archive_cmds\") 1>&5; (eval $archive_cmds) 2>&1 | grep " -lc " 1>&5 ; }; then
- need_lc=no
- fi
- allow_undefined_flag=$save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- fi
- $rm conftest*
- echo "$ac_t$need_lc" 1>&6
- ;;
- esac
-fi
-ac_cv_archive_cmds_needs_lc=$need_lc
/ltcf-c.sh
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: conf.change.pl
===================================================================
--- conf.change.pl (revision 3)
+++ conf.change.pl (nonexistent)
@@ -1,177 +0,0 @@
-#!/usr/bin/perl -w
-
-# this script patches a config.status file, to use our own perl script
-# in the main loop
-# we do it this way to circumvent hacking (and thereby including)
-# autoconf function (which are GPL) into our LGPL acinclude.m4.in
-# written by Michael Matz <matz@kde.org>
-# adapted by Dirk Mueller <mueller@kde.org>
-#
-# This file is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Library General Public
-# License as published by the Free Software Foundation; either
-# version 2 of the License, or (at your option) any later version.
-
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-
-# You should have received a copy of the GNU Library General Public License
-# along with this library; see the file COPYING.LIB. If not, write to
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# we have to change two places
-# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
-# later autoconf's
-# 2. the big main loop which patches all Makefile.in's
-
-use File::Basename;
-
-my $ac_aux_dir = dirname($0);
-my ($flag);
-local $ac_version = 0;
-my $vpath_seen = 0;
-$flag = 0;
-
-while (<>) {
-# usage of $flag: 0 -- we have seen nothing yet
-# 1 -- we are in (1)
-# 2 -- we have ended (1)
-# 3 -- we are in (2)
-# 4 -- we ended (2)
-
- if ($flag == 4) {
- print;
- } elsif ($flag == 0) {
-# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
-# ends with (excluding) "CONFIG_FILE=..."
-# in later autoconf (2.14.1) there is no CONFIG_FILES= line,
-# but instead the (2) directly follow (1)
- if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
- $flag = 1;
- if ($1 eq 'lines') {
- # lets hope its different with 2141,
- # wasn't able to verify that
- if ($2 eq '48') {
- $ac_version = 250;
- }
- else {
- $ac_version = 2141;
- }
- } elsif ($1 eq 'cmds') {
- $ac_version = 213;
- }
- # hmm, we don't know the autoconf version, but we try anyway
- } else {
- print;
- }
- } elsif ($flag == 1) {
- if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
- print;
- $flag = 2;
- } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
- $flag = 3;
- }
- } elsif ($flag == 2) {
-# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1))
-# end with: "rm -f conftest.s\*"
-# on autoconf 250, it ends with '# CONFIG_HEADER section'
- if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
- $flag = 3;
- } else {
- print;
- }
- } elsif ($flag == 3) {
- if (/^\s*rm\s+-f\s+conftest/ ) {
- $flag = 4;
- &insert_main_loop();
- } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
- $flag = 4;
- &insert_main_loop();
- #die "hhhhhhh";
- if ($ac_version != 2141) {
- print STDERR "hmm, don't know autoconf version\n";
- }
- } elsif (/^\#\s*CONFIG_HEADER section.*/) {
- $flag = 4;
- &insert_main_loop();
- if($ac_version != 250) {
- print STDERR "hmm, something went wrong :-(\n";
- }
- } elsif (/VPATH/ ) {
- $vpath_seen = 1;
- }
- }
-}
-
-die "wrong input (flag != 4)" unless $flag == 4;
-print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
-
-sub insert_main_loop {
-
- if ($ac_version == 250) {
- &insert_main_loop_250();
- }
- else {
- &insert_main_loop_213();
- }
-}
-
-sub insert_main_loop_250 {
-
- print <<EOF;
- #echo Doing the fast build of Makefiles -- autoconf $ac_version
-EOF
- if ($vpath_seen) {
- print <<EOF;
- # VPATH subst was seen in original config.status main loop
- echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >>\$tmp/subs.sed
-EOF
- }
- print <<EOF;
- rm -f \$tmp/subs.files
- for ac_file in .. \$CONFIG_FILES ; do
- if test "x\$ac_file" != x..; then
- echo \$ac_file >> \$tmp/subs.files
- fi
- done
- if test -f \$tmp/subs.files ; then
- perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL"
- fi
- rm -f \$tmp/subs.files
-
-fi
-EOF
- return;
-}
-
-sub insert_main_loop_213 {
- print <<EOF;
-#echo Doing the fast build of Makefiles -- autoconf $ac_version
-if test "x\$ac_cs_root" = "x" ; then
- ac_cs_root=conftest
-fi
-EOF
- if ($vpath_seen) {
- print <<EOF;
-# VPATH subst was seen in original config.status main loop
-echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >> \$ac_cs_root.subs
-EOF
- }
- print <<EOF;
-rm -f \$ac_cs_root.sacfiles
-for ac_file in .. \$CONFIG_FILES ; do
- if test "x\$ac_file" != x..; then
- echo \$ac_file >> \$ac_cs_root.sacfiles
- fi
-done
-if test -f \$ac_cs_root.sacfiles ; then
- perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL"
-fi
-rm -f \$ac_cs_root.s*
-
-EOF
- return;
-}
/conf.change.pl
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: new-ltmain.sh
===================================================================
--- new-ltmain.sh (revision 3)
+++ new-ltmain.sh (nonexistent)
@@ -1,5408 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.4a
-TIMESTAMP=" (1.641.2.206mm 2001/04/03 21:47:47)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
- echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$modename: not configured to build any kind of library" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- echo "$progname: invalid tag name: $tagname" 1>&2
- exit 1
- ;;
- esac
-
- if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
- else
- echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- exit 0
- ;;
-
- --config)
- sed -n -e '/^### BEGIN LIBTOOL CONFIG/,/^### END LIBTOOL CONFIG/p' < "$0"
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- sed -n -e "/^### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
- done
- exit 0
- ;;
-
- --debug)
- echo "$progname: enabling shell trace mode"
- set -x
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
- else
- echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- echo "enable static libraries"
- else
- echo "disable static libraries"
- fi
- exit 0
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --quiet | --silent)
- show=:
- ;;
-
- --tag) prevopt="--tag" prev=tag ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
-fi
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- case $nonopt in
- *cc | *++ | gcc* | *-gcc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- prev=
- lastarg=
- srcfile="$nonopt"
- suppress_output=
-
- user_target=no
- for arg
- do
- case $prev in
- "") ;;
- xcompiler)
- # Aesthetically quote the previous argument.
- prev=
- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
- case $arg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
-
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- continue
- ;;
- esac
-
- # Accept any command-line options.
- case $arg in
- -o)
- if test "$user_target" != "no"; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit 1
- fi
- user_target=next
- ;;
-
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- continue
- ;;
- esac
-
- case $user_target in
- next)
- # The next one is the -o target name
- user_target=yes
- continue
- ;;
- yes)
- # We got the output file
- user_target=set
- libobj="$arg"
- continue
- ;;
- esac
-
- # Accept the current argument as the source file.
- lastarg="$srcfile"
- srcfile="$arg"
-
- # Aesthetically quote the previous argument.
-
- # Backslashify any backslashes, double quotes, and dollar signs.
- # These are the only characters that are still specially
- # interpreted inside of double-quoted scrings.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $lastarg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- done
-
- case $user_target in
- set)
- ;;
- no)
- # Get the name of the library object.
- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- *)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit 1
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSfmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit 1
- ;;
- esac
-
- # Infer tagged configuration to use if any are available and
- # if one wasn't chosen via the "--tag" command line option.
- # Only attempt this if the compiler in the base compile
- # command doesn't match the default compiler.
- if test -n "$available_tags" && test -z "$tagname"; then
- case $base_compile in
- "$CC "*) ;;
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when ltconfig was run.
- "`$echo $CC` "*) ;;
- *)
- for z in $available_tags; do
- if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
- # Evaluate the configuration.
- eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
- case $base_compile in
- "$CC "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- "`$echo $CC` "*)
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- echo "$modename: unable to infer tagged configuration"
- echo "$modename: specify a tag with \`--tag'" 1>&2
- exit 1
-# else
-# echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit 1" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit 1" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$0" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
- echo $srcfile > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $srcfile"
- fi
-
- if test ! -d ${xdir}$objdir; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- status=$?
- if test $status -ne 0 && test ! -d ${xdir}$objdir; then
- exit $status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit 1
- fi
-
- if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- suppress_output=' >/dev/null 2>&1'
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $srcfile"
- else
- command="$base_compile $srcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit 1
- fi
-
- if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit 0
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invokation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- add_flags=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- fi
- build_libtool_libs=no
- build_old_libs=yes
- prefer_static_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test $# -gt 0; do
- arg="$1"
- base_compile="$base_compile $arg"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit 1
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit 1
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit 1
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit 1
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: not more than one -exported-symbols argument allowed"
- exit 1
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit 1
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "$arg" = "-lc"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # These systems don't actually have c library (as such)
- continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- esac
- elif test "$arg" = "-lm"; then
- case $host in
- *-*-cygwin* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have math library (as such)
- continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody math library is in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *)
- no_install=yes
- ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- add_flags="$add_flags $arg"
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit 1
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit 1
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- add_flags="$add_flags $arg"
- ;;
- esac
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Infer tagged configuration to use if any are available and
- # if one wasn't chosen via the "--tag" command line option.
- # Only attempt this if the compiler in the base link
- # command doesn't match the default compiler.
- if test -n "$available_tags" && test -z "$tagname"; then
- case $base_compile in
- "$CC "*) ;;
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when ltconfig was run.
- "`$echo $CC` "*) ;;
- *)
- for z in $available_tags; do
- if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
- # Evaluate the configuration.
- eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
- case $base_compile in
- "$CC "*)
- # The compiler in $compile_command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- "`$echo $CC` "*)
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- echo "$modename: unable to infer tagged configuration"
- echo "$modename: specify a tag with \`--tag'" 1>&2
- exit 1
-# else
-# echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d $output_objdir; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
- exit $status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- specialdeplibs=
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- libs="$libs $deplib"
- done
-
- if test $linkmode = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- uninst_deplibs= # uninstalled libtool libraries
- uninst_path= # paths that contain uninstalled libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit 1
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test $linkmode = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test $pass = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -l*)
- if test $linkmode != lib && test $linkmode != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- # Search the libtool library
- lib="$searchdir/lib${name}.la"
- if test -f "$lib"; then
- found=yes
- break
- fi
- done
- if test "$found" != yes; then
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- ;;
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test $pass = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test $pass = scan; then
- deplibs="$deplib $deplibs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac
- continue
- ;;
- -R*)
- if test $pass = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- if test "$deplibs_check_method" != pass_all; then
- echo
- echo "*** Warning: This library needs some functionality provided by $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- else
- echo
- echo "*** Warning: Linking the shared library $output against the"
- echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test $pass != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac
- ;;
- *.lo | *.$objext)
- if test $pass = conv; then
- deplibs="$deplib $deplibs"
- elif test $linkmode = prog; then
- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac
- if test $found = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib'" 1>&2
- exit 1
- fi
-
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variable installed.
- installed=yes
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test $linkmode != prog && test $linkmode != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test $pass = conv; then
- # only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit 1
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- tmp_libs="$tmp_libs $deplib"
- done
- elif test $linkmode != prog && test $linkmode != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit 1
- fi
- continue
- fi
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit 1
- fi
-
- # This library was specified with -dlopen.
- if test $pass = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit 1
- fi
- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- uninst_path="$uninst_path $abs_ladir"
- fi
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test $pass = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit 1
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi
-
- if test -z "$libdir"; then
- # link the convenience library
- if test $linkmode = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
- if test $linkmode = prog && test $pass != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test $linkalldeplibs = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- tmp_libs="$tmp_libs $deplib"
- done
- continue
- fi
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
-
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- uninst_deplibs="$uninst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
- if test $linkmode = lib && test "$hardcode_into_libs" = all; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`echo $soroot | sed -e 's/^.*\///'`
- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- eval cmds=\"$extract_expsyms_cmds\"
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- eval cmds=\"$old_archive_from_expsyms_cmds\"
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi
-
- if test $linkmode = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit 1
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test $linkmode = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test $linkmode = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- add="-l$name"
- fi
-
- if test $linkmode = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test $linkmode = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- echo
- echo "*** Warning: This library needs some functionality provided by $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi
-
- if test $linkmode = lib; then
- if test -n "$dependency_libs" &&
- { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
- test $link_static = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test $link_all_deplibs != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="-L$absdir/$objdir"
- else
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="-L$absdir"
- fi
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- done
- fi
- fi
- done
- dependency_libs="$newdependency_libs"
- if test $pass = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test $pass != dlopen; then
- if test $pass != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Make sure that $var contains only unique libraries
- # and add them in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- case "$deplib" in
- -L*) new_libs="$deplib $new_libs" ;;
- *)
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done
- fi
- done
- if test $linkmode = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit 1
- else
- echo
- echo "*** Warning: Linking the shared library $output against the non-libtool"
- echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test $# -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- current="$2"
- revision="$3"
- age="$4"
-
- # Check that each of the things are valid numbers.
- case $current in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case $revision in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case $age in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- if test $age -gt $current; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix)
- major=`expr $current - $age + 1`
- verstring="sgi$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test $loop != 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="sgi$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test $loop != 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- verstring="0.0"
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- for path in $uninst_path; do
- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
- done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test $build_libtool_need_lc = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behaviour.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $LTCC -o conftest conftest.c $deplibs
- if test $? -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" -a "$name" != "0"; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occured in the first compile. Let's try to salvage the situation:
- # Compile a seperate program for each library.
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" -a "$name" != "0"; then
- $rm conftest
- $LTCC -o conftest conftest.c $i
- # Did it work?
- if test $? -eq 0 ; then
- ldd_output=`ldd conftest`
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- droppeddeps=yes
- echo
- echo "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" -a "$name" != "0"; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | sed 10q \
- | egrep "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
- grep . >/dev/null; then
- echo
- if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
- echo "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
-
- if test $allow_undefined = no; then
- echo
- echo "*** Since this library must not contain undefined symbols,"
- echo "*** because either the platform does not support them or"
- echo "*** it was explicitly requested with -no-undefined,"
- echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test $hardcode_into_libs = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test x$dlname = x; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- for link
- do
- linknames="$linknames $link"
- done
-
-# # Ensure that we have .o objects for linkers which dislike .lo
-# # (e.g. aix) in case we are running --disable-static
-# for obj in $libobjs; do
-# xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-# if test "X$xdir" = "X$obj"; then
-# xdir="."
-# else
-# xdir="$xdir"
-# fi
-# baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-# oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-# if test ! -f $xdir/$oldobj && test "$baseobj" != "$oldobj"; then
-# $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-# $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-# fi
-# done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- eval cmds=\"$export_symbols_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink && test "$hardcode_into_libs" = all; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Add all flags from the command line. We here create a library,
- # but those flags were only added to compile_command and
- # finalize_command, which are only used when creating executables.
- # So do it by hand here.
- compiler_flags="$compiler_flags $add_flags"
- # Only add it to commands which use CC, instead of LD, i.e.
- # only to $compiler_flags
- #linker_flags="$linker_flags $add_flags"
-
- # Do each of the archive commands.
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
- else
- eval cmds=\"$archive_cmds\"
- fi
- if len=`expr "X$cmds" : ".*"` &&
- test $len -le $max_cmd_len; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$save_output-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
- test $len -le $max_cmd_len; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test $k -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$save_output-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- # Set up a command to remove the reloadale object files
- # after they are used.
- i=0
- while test $i -lt $k
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
- else
- eval cmds=\"$archive_cmds\"
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~$rm $delfiles\"
- fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink && test "$hardcode_into_libs" = all; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
- exit 0
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit 1
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit 0
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit 0
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-# else
-# # Just create a symlink.
-# $show $rm $libobj
-# $run $rm $libobj
-# xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-# if test "X$xdir" = "X$libobj"; then
-# xdir="."
-# else
-# xdir="$xdir"
-# fi
-# baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-# oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-# $show "(cd $xdir && $LN_S $oldobj $baseobj)"
-# $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit 0
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles="$objs$old_deplibs"
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
- $run $rm $export_symbols
- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- else
- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`echo "$arg" | sed -e 's%^.*/%%'`
- $run eval 'echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
- < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr_t) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit 1
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
- # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
- # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
- # This does not apply on AIX for ia64, which uses a SysV linker.
- case "$host" in
- ia64-*-aix5*) ;;
- *-*-aix4* | *-*-aix5*)
- compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
- finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
- esac
-
- if test $need_relink = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit 0
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="cd `pwd`; $relink_command"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
- case $0 in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*) exeext=.exe ;;
- *) exeext= ;;
- esac
- $rm $output
- trap "$rm $output; exit 1" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- uninst_deplibs='$uninst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if (eval \$relink_command); then :
- else
- $rm \"\$progdir/\$file\"
- exit 1
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # win32 systems need to use the prog path for dll
- # lookup to work
- *-*-cygwin* | *-*-pw32*)
- $echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
-"
- ;;
-
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- # Export the path to the program.
- PATH=\"\$progdir:\$PATH\"
- export PATH
-
- exec \$program \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit 1
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
- chmod +x $output
- fi
- exit 0
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$objs$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print | $NL2SP`
- done
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- eval cmds=\"$old_archive_from_new_cmds\"
- else
-# # Ensure that we have .o objects in place in case we decided
-# # not to build a shared library, and have fallen back to building
-# # static libs even though --disable-static was passed!
-# for oldobj in $oldobjs; do
-# if test ! -f $oldobj; then
-# xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-# if test "X$xdir" = "X$oldobj"; then
-# xdir="."
-# else
-# xdir="$xdir"
-# fi
-# baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-# obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-# $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-# $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
-# fi
-# done
-
- compiler_flags="$compiler_flags $add_flags"
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test $len -le $max_cmd_len; then
- :
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
- test $len -le $max_cmd_len; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- eval cmds=\"\$concat_cmds~$old_archive_cmds\"
- fi
- fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test $hardcode_into_libs = all &&
- test "$installed" = no && test $need_relink = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit 0
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg="$nonopt"
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest="$arg"
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*) ;;
-
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest="$arg"
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test $# -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test "$hardcode_into_libs" = all && test -n "$relink_command"; then
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- continue
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test "$hardcode_into_libs" = all && test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test $# -gt 0; then
- # Delete the old symlinks, and create new ones.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit 0
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- uninst_deplibs=
- relink_command=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$uninst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
- exit 1
- fi
-
- finalize=yes
- for lib in $uninst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
- else
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyways
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`echo $destfile | sed -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
-
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec $SHELL $0 --finish$current_libdirs
- exit 1
- fi
-
- exit 0
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- exit 0
-
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- echo " $libdir"
- done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
- echo "See any operating system documentation about shared libraries for"
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- echo "----------------------------------------------------------------------"
- exit 0
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit 1
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit 1
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved enviroment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now actually exec the command.
- eval "exec \$cmd$args"
-
- $echo "$modename: cannot exec \$cmd$args"
- exit 1
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit 0
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- rmdirs=
-
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$objdir"
- else
- objdir="$dir/$objdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test $mode = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test $mode = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
- if test $mode = uninstall; then
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- fi
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- # Do a test to see if this is a libtool program.
- if test $mode = clean &&
- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$file
-
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles
- done
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit 0
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
- ;;
- esac
-
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
-fi # test -z "$show_help"
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
- exit 0
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-### END LIBTOOL TAG CONFIG: disable-shared
-
-### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
/new-ltmain.sh
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: depcomp
===================================================================
--- depcomp (revision 3)
+++ depcomp (nonexistent)
@@ -1,367 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay!
- if "$@" -MT "$object" -MF "$tmpdepfile" -MD -MP; then :
- else
- stat=$?
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- if "$@" -Wp,"$gccflag$tmpdepfile"; then :
- else
- stat=$?
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5).
- tr ' ' '
-' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr '
-' ' ' >> $depfile
-
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file.
- tmpdepfile=`echo "$object" | sed 's/\(.*\)\..*$/\1.u/'`
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5).
- tr ' ' '
-' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr '
-' ' ' >> $depfile
-
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- test -z "$dashmflag" && dashmflag=-M
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*) # this is libtool, let us make it quiet
- for arg
- do # cycle over the arguments
- case "$arg" in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- # X makedepend
- (
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in no)
- set ""; shift
- cleared=yes
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tail +3 "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
/depcomp
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: ChangeLog
===================================================================
--- ChangeLog (revision 3)
+++ ChangeLog (nonexistent)
@@ -1,753 +0,0 @@
-2001-11-07 Walter Tasin <tasin@kdevelop.org>
-
- * now #MIN_CONFIG tag takes parameters for KDE_USE_QT, too.
- e.g. #MIN_CONFIG(2.2) for qt 2.2 usage
-
-2000-11-30 David Faure <faure@kde.org>
-
- * acinclude.m4.in: Added kde_moduledir which points to $prefix/lib/kde2/
-
-2000-07-24 Alex Zepeda <jazepeda@pacbell.net>
-
- * acinclude.m4.in: Remove the test for malloc.h
-
-2000-04-05 Michael Matz <matz@ifh.de>
-
- * config.pl : added kludge for compiling regexp's even if
- perl < 5.005 is installed
- * conf.change.pl : added support for autoconf 2.14.1
-
-2000-03-27 David Faure <faure@kde.org>
-
- * acinclude.m4.in, Makefile.common: changed inst-apps semantics
- If present, only the subdirs it lists will be configured and compiled.
- If absent, then subdirs is used (and inst-apps isn't generated anymore)
-
-2000-03-22 David Faure <faure@kde.org>
-
- * am_edit: Added support for KDE_ICON = AUTO
-
-2000-03-18 David Faure <faure@kde.org>
-
- * Makefile.common: Rewrote the list-of-Makefiles generation to make it
- simpler and nicer, using create_makefiles' way of doing it.
- Added support for COMPILE_LAST and COMPILE_FIRST in toplevel Makefile.am
-
-2000-01-05 David Faure <faure@kde.org>
-
- * Makefile.common: hacked around autoconf bug (setting INSTALL to ".."
- when calling a subconfigure and INSTALL is already set).
-
-1999-12-15 Waldo Bastian <bastian@kde.org>
-
- * acinclude.m4.in: Test whether Qt compiles AND LINKS without flags.
-
-1999-06-24 Stephan Kulow <coolo@kde.org>
-
- * am_edit: generate correct Makefile entries for kde-i18n toplevel directories
- * am_edit:
-
-1999-06-14 Stephan Kulow <coolo@kde.org>
-
- * am_edit: remove idl generated files on make clean
-
-1999-06-09 Stephan Kulow <coolo@kde.org>
-
- * am_edit: skipping programs with variables in sources for final
-
-1999-06-07 Stephan Kulow <coolo@kde.org>
-
- * am_edit: added support for idl files
-
-1999-06-02 Stephan Kulow <coolo@kde.org>
-
- * Makefile.common: preserve comments in .pot files to make it
- possible for programmers and translators to comment them
-
-1999-06-02 Simon Hausmann <hausmann@kde.org>
-
- * acinclude.m4.in: added kde_servicetypesdir
-
-1999-06-02 David Faure <faure@kde.org>
-
- * acinclude.m4.in: removed LIB_KFM and LIB_KDEUTIL aliases
-
-1999-05-28 Simon Hausmann <hausmann@kde.org>
-
- * acinclude.m4.in: added kde_servicesdir
-
-1999-05-27 Stephan Kulow <coolo@kde.org>
-
- * am_edit: lots of changes for better support of --enable-final
-
-1999-05-22 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added support for --with-dmalloc
-
-1999-05-19 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added support for --enable-final
-
- * am_edit: added support for --enable-final
-
-1999-05-06 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: change the meaning of --disable-debug
-
-1999-05-04 Helge Deller <deller@gmx.de>
-
- * acinclude.m4.in: the test for the X-includes/directories failed,
- when compile & link work without special directories (as on HP-UX).
-
-1999-04-20 Stephan Kulow <coolo@kde.org>
-
- * am_edit: adding DESTDIR replacement for rm and uninstall-local
- too. Seems very useless, but makes testing for uninstall easier
-
-1999-04-01 David Faure <faure@kde.org>
-
- * acinclude.m4.in: Added -lkfile to $(LIB_KIO)
-
-1999-03-30 David Faure <faure@kde.org>
-
- * acinclude.m4.in: Added AC_CHECK_KDEMAXPATHLEN, which defines KDEMAXPATHLEN.
-
-1999-03-29 David Faure <faure@kde.org>
-
- * acinclude.m4.in: added LIB_X11 to XPMLIB and GLLIB, because
- on SCO, they need it _after_ themselves.
-
-1999-03-28 David Faure <faure@kde.org>
-
- * acinclude.m4.in: added LIB_KFM to LIB_KAB alias
-
-1999-03-26 David Faure <faure@kde.org>
-
- * acinclude.m4.in: made LIB_KFILE use LIB_KIO instead of LIB_KFM
- added LIB_KFORMULA
-
-1999-03-20 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: check for libXext - for Russel :)
-
-1999-03-16 Stephan Kulow <coolo@kde.org>
-
- * acinclud3.m4.in: extend the MICO test with a list of possible
- places where to find CORBA.h
-
-1999-03-15 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: move $QTINC and $QTLIB in search path
-
-1999-03-14 Stephan Kulow <coolo@kde.org>
-
- * am_edit: install-root is obsolute. Use DESTDIR always
-
-1999-03-03 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixing a bug, that $QTDIR was taken before --with-qt*
- * acinclude.m4.in: added KDE_USE_QT, that you can choose if to
- use QT 2.0 or KDE 1.0
-
- * Makefile.common: added target package-merge
-
- * am_edit: many fixes to the POFILES handeling of am_edit
-
-1999-03-02 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: first look at libjpeg6b (from kdesupport) then
- for libjpeg
-
- * config.*, libtool.*: update to the latest FSF tools
-
-1999-02-23 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: error when Sparc CC is used. Better use it in
- configure and tell him the story then letting him find it while
- compiling
-
- * acinclude.m4.in: adding KDE_CHECK_EXTRA_LIBS to all possible tests,
- so that --with-extra-includes is used when needed.
-
- * acinclude.m4.in: configure looks for giflib30, so it should say so
-
- * acinclude.m4.in: don't overwrite x include parameters. Patch by
- Ari Lemmke <ari.lemmke@regex.fi> (bug report 741)
-
-1999-02-20 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixing KDE_CHECK_PATHS for rechecking. In case
- of defaults (kdelibs) configure didn't cache the results
-
-1999-02-18 David Faure <faure@kde.org>
-
- * acinclude.m4.in: added AC_CHECK_S_ISSOCK, to fix #706.
-
-1999-02-17 David Faure <faure@kde.org>
-
- * acinclude.m4.in: added AC_CHECK_RANDOM, just like
- AC_CHECK_USLEEP, to enable the fake if necessary.
-
-1999-02-13 Kurt Granroth <granroth@kde.org>
-
- * acinclude.m4.in: look for QT-2.0
-
-1999-02-05 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: in macro KDE_FIND_PATH treat user given dirs
- and $PATH dirs the same. Added seperate test for to find binary
- ($5) to replace findperl
-
-1999-01-28 Stephan Kulow <coolo@kde.org>
-
- * automoc: added patch by jbb to be a little bit more precise about
- the number of sourcefiles that include the moc file if it's != 1.
- Besides that automoc will fail with exit code, so the Makefile.cvs
- process does stop in case a problem accoured.
-
- * automoc: don't hardcode header suffix, but allow *.h, *.hh and *.H
-
-1999-01-27 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: try qobjcoll.h and qapplication.h before saying
- OK to qt headers. (I could kill SuSE for splitting into qt-dev
- and qt-compat)
-
-1991-01-23 Stephan Kulow <coolo@kde.org>
-
- * automoc: added fixes by JB <jb.nz@writeme.com>
-
-1999-01-21 Stephan Kulow <coolo@kde.org>
-
- * automoc: added --help and --path (for use in dist-hook)
-
-1999-01-20 Alex Zepeda <garbanzo@hooked.net>
-
- * ltconfig: added entries for FreeBSD 4.x
-
-1999-01-19 Stephan Kulow <coolo@kde.org>
-
- * automoc: added a distclean-metasources target which deletes all
- moc files and let distclean depend on it
-
-1999-01-18 Stephan Kulow <coolo@kde.org>
-
- * automoc: several fixes (ignore comment lines + join lines
- with \ )
-
- * automoc: support META_INCLUDES in case the header files are
- not in the same dir as the sources.
-
-1999-01-17 Stephan Kulow <coolo@kde.org>
-
- * automoc: several fixes.
-
-1999-01-16 Stephan Kulow <coolo@kde.org>
-
- * automoc: added support for included MOC files.
-
- * acinclude.m4.in: use srcdir for the subdirs stuff as well
-
- * automoc: added better command line parsing and some preparation
- for handling "normal" moc files
-
- * acinclude.m4.in: added aliases for libkio and libkdeutil
-
-1999-01-15 Harri Porten <porten@kde.org>
-
- * automoc: Carved in stone syntax for Makefile.in:
- {program}_METASOURCES = USE_AUTOMOC [{suffix}]
-
-1999-01-15 Stephan Kulow <coolo@kde.org>
-
- * Makefile.common: set top_srcdir to .
-
-1999-01-14 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: don't use config.h.bot any longer
-
-1999-01-08 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added KDE_CHECK_NEWLIBS
-
- * acinclude.m4.in: test for Qt even if both --with-qt-headers and
- --with-qt-libraries are given. They may be wrong.
-
-1999-01-06 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: change the MOC test so it can be used for other
- tools as well
-
-1998-12-28 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: look for QT-1.42 since kpanel needs it
-
-1998-12-27 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added /usr/lib for libpython test
-
- * acinclude.m4.in: take my email address out of it and added a
- reference to www.kde.org/faq
-
- * acinclude.m4.in: use Qt >= 1.4
-
- * acinclude.m4.in: added KDE_CHECK_NAMESPACES
-
-1998-12-18 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: test for directories to exist before saying yes
- to compilation :)
-
-1998-12-14 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added CPLUSPLUS for the kimgio test. It's
- only important for shaman right now, but at least there it is :)
-
-1998-12-12 Stephan Kulow <coolo@kde.org>
-
- * Makefile.cvs: added common Makefile.cvs
-
- * acinclude.m4.in: Thomas.Schwarz@pro-sieben.de reported a very ugly
- bug in AC_PROG_CXXCPP, so I added my own version
-
- * acinclude.m4.in: added KDE_CREATE_SUBDIRS_LIST to simplify
- most toplevel configures
-
-1998-12-11 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added call to AC_PROG_CXXCPP. Not really sure why
- it never caused problems
-
- * acinclude.m4.in: moved LIBTIFF alias
-
- * acinclude.m4.in: only test for the existance of libkimgio if the
- user wants to. For 99% of the applications it doesn't matter if
- configure can find libkimgio :)
-
-1998-12-10 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: some changes to the python check to handle $LIBDL
-
-1998-12-09 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: make Alex's tiff test a real one
-
- * acinclude.m4.in: fix the LIB_TIFF alias to really expand
-
-1998-12-08 Alex Zepeda <garbanzo@hooked.net>
-
- * acinclude.m4.in: Fix tiff test to use libtiff34 if it exists.
- This is what the FreeBSD port installs to for whatever reason.
-
- * acinclude.m4.in: s/kde/KDE/ (at least in some of the
- descriptions, obviously no variable names were touched.
-
-1998-12-08 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: moved the LIB_QT alias to the Qt check
-
- * acinclude.m4.in: unset KDEDIR before running conftest
-
- * acinclude.m4.in: fixed mean typo
-
- * acinclude.m4.in: added the copyright header for the gettext
- tests, so that people know we're legal ;)
-
- * acinclude.m4.in: set language to C++ before testing QIMGIO
-
-1998-12-07 Alex Zepeda <garbanzo@hooked.net>
-
- * acinclude.m4.in: Fix PNG test to use correct ANSI C code, and
- not trip up gcc.
-
-1998-12-07 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: don't hardcode -ldl
-
- * acinclude.m4.in: move the LIB_X11 alias to the X test to make it
- useful for kdesupport as well
-
- * acinclude.m4.in: give the word CHECK_KIMGIO a meaning in really
- checking for it
-
- * acinclude.m4.in: simple fix to prevent kimgio test from compiling
- KDE application in kdelibs
-
-1998-12-05 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: let KDE_CHECK_KIMGIO depend on AC_PATH_KDE,
- otherwise most tests fail. It didn't mean anything to 90% of the
- packages since they test for KDE before kimgio, but for shaman
- it does
-
- * ltconfig: the real fix for the Solaris && gcc problem.
- Thanks Kurt for reporting it and Alexandre for fixing it :)
-
-1998-12-04 Stephan Kulow <coolo@kde.org>
-
- * libtool.*: update again
-
- * acinclude.m4.in: changed the function to test for libnsl to
- inet_ntoa since UnixWare 7's version did not have gethostbyname,
- but needs libnsl
-
-1998-12-02 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixed the MOC test (again) to use the PATH variable
- correctly (with the correct seperator)
-
- * config.guess: update from the soon to be released autoconf-2.13
-
-1998-12-01 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixes for the MOC test. Use PATH now when found
-
-1998-11-30 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: extended the MOC test. It checks now for the
- first line of the output of "moc --help" and looks for Qt in it.
-
-1998-11-27 Stephan Kulow <coolo@kde.org>
-
- * ltconfig: another libtool update. Fixes an ugly bug on Solaris,
- when GNU ld is in path before Solaris ld, but gcc uses the later
-
-1998-11-26 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: made the Qt test more advance to check for qt
- 1.41 - I still need to make it better, but there shouldn't be too
- many qt releases in a row, would there? ;)
-
- * ltconfig: libtool update with better BSD/OS support
-
-1998-11-22 Stephan Kulow <coolo@kde.org>
-
- * ltconfig: cool - libtool uses g++ now to link libraries on Solaris.
- This means, static objects become usuable on that plattforms (some
- others as well).
-
-1998-11-20 Stephan Kulow <coolo@kde.org>
-
- * ltmain.sh: updated libtool from their CVS - fixes bugs we haven't
- found and adds some more features, that we do not need ;-)
-
-1998-11-19 David Faure <faure@kde.org>
-
- * acinclude.m4.in: added AC_CHECK_UTMP_FILE, taken from kdebase
-
-1998-11-16 Harri Porten <porten@kde.org>
-
- * automoc: take care of "ar" object files, too.
-
-1998-11-16 Stephan Kulow <coolo@kde.org>
-
- * libtool.m4.in: revised my --silent patch. The solution
- Alexandre suggested is much better.
-
-1998-11-15 Stephan Kulow <coolo@kde.org>
-
- * ltconfig.in: done some tweakings to support -export-dynamic
- with egcs
-
- * config.sub: wow - BeOS support :)
-
-1998-11-14 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: don't use rpath for test program, if rpath is
- disabled for applications
-
- * ltconfig: patched libtool to make it silent without making
- ltconfig silent
-
- * acinclude.m4.in: make libtool silent again
-
- * libtool.m4.in: update to libtool-981114 (untested stuff, but
- we have to test it to make it tested - sounds that logical? :-)
-
- * libtool.m4.in: moved the self stricked libtool tests to "our"
- file.
-
- * acinclude.m4.in: moved ChangeLog of kdebase which I used to
- maintain acinclude.m4.in logs to kde-common/admin. Hopefully I
- will maintain it more often from now on :)
-
-1998-07-27 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixed some things in the MOC test
-
- * acinclude.m4.in: fixed this damn msgfmt test
-
-1998-06-02 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: ignore msgfmt, if not GNU gettext
-
-1998-05-28 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixed KDE_CHECK_STL. Checks for HP and SGI type
-
- * acinclude.m4.in: embraced every variable with "" to make
- it consistent
-
- * acinclude.m4.in: various fixes for the koffice checks
- (mico, ministl and python)
-
-1998-05-16 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: don't use KDE_CHECK_QT_DIRECT, when
- --with-qt-libs are given
-
-1998-04-21 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: cool, I found the trick to suppress the ls
- errors
-
-1998-04-20 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: rewrote the qt checking test, since it
- didn't work under FreeBSD, since it relied on the .so link.
- The new version is a little bit buggy, but I need some testing
- to make it perfect
-
- * acinclude.m4.in: fixed the side effects of the PAM test
-
-1998-04-18 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: hopefully fixed the PAM test (I rewrote it)
-
-1998-04-16 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: extended the getsockname test inspired
- by a patch by Martin Baulig
-
- * configure.in: added test for utmp file
-
- * acinclude.m4.in: made --without-pam default
-
-
-1998-04-06 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: don't test compiling, linking, running in
- one step. This proved to be too dangerous for my mail box.
-
-1998-03-21 Stephan Kulow <coolo@kde.org>
-
- * libtool.m4.in: created some new macros to work around this
- ugly (because long) help of configure --enable-shared/static
-
-1998-03-05 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: set language to C++ before trying the ksize_t
- test
-
- * configure.in: sorted the Makefile entries alphabeticly (and all
- together: we love xemacs! we love xemacs! ;)
-
- * configure.in: added sk
-
- * acinclude.m4.in: substitute x_libraries to fix the empty -rpath
-
-1998-03-03 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: add a rpath for every shared library, that is
- linked too (especially X11 libraries)
-
-Tue Feb 24 22:04:59 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added kde_sounddir and set kde_minidir to
- kde_icondir/mini to break not too much
-
-Sun Feb 15 18:25:50 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: added bugfix by Bob Miller <kbob@engr.sgi.com>
- (correct reset of IFS)
-
-Wed Feb 11 00:53:11 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: made shadow under Linux default, since the
- binaries will work also under non-shadow systems. The only problem
- left is PAM, so I disabled shadow in case, PAM is present
-
-Tue Feb 10 16:46:32 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: added test for nice to find out, if the option
- -nice works for the screensavers
-
- * acinclude.m4.in: port to LynxOS. For this I moved all library
- search routines in KDE_MISC_TESTS, so I don't need to write this
- in every package
-
- * README: some grammar fixes
-
- * acinclude.m4.in: search for the libs in the exec_prefix, when
- it's present
-
-Sun Feb 8 14:07:23 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: updated all packages
-
- * libtool.m4.in: applied patch for libtool.m4.in to show the
- correct default for shared and static
-
-
-Sat Feb 7 10:56:00 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: good news - KDE is relocatable again.
-
- * libtool.m4.in: updated to latest libtool 1.0i
-
-Fri Feb 6 21:26:51 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: added a AC_PROVIDE for AC_PROG_CC and
- AC_PROG_CPP to KDE_CHECK_COMPILERS
-
-Thu Feb 5 16:27:47 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: put $QTDIR/bin before /usr/bin in the path to
- look for moc. I don't know why, but I got a report, that configure
- found /usr/bin/moc under Solaris
-
-Fri Jan 30 15:47:50 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: export LIBRARY_PATH after reset to the saved
- value
-
- * acinclude.m4.in: unset the LIBRARY_PATH to get a relieable
- result when trying to find, if Qt compiles without -L
-
-Sat Jan 24 00:45:52 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: fixed another bug in AC_PATH_KDE
-
-Thu Jan 22 14:46:15 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: fixed an ugly bug in AC_BASE_PATH_KDE
-
- * kappfinder/kappfinder.in: let kappfinder create by configure to
- allow the use of the kde_ paths
-
-Wed Jan 21 22:19:35 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in: - added a install_root prefix to all paths, if
- set, to enable package managers to move the whole installation at once
- - added --with-install-root to set the install_root prefix
-
-Tue Jan 20 22:41:04 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: added NOOPT_CXXFLAGS to allow kioslave to be
- compiled without -O2
-
-Mon Jan 19 21:55:21 1998 Stephan Kulow <coolo@kde.org>
-
- * configure.in: some little fixes for the Makefiles
-
- * acinclude.m4.in: --prefix will no longer override the search for
- libraries. If they are present somewhere, they are used (through
- the methodes in KApplication)
-
-Mon Jan 12 00:30:36 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in fixed an ugly bug, that accoured, when
- qt_libraries is not set (empty/equals X11/not necessary)
-
- * acinclude.m4.in moved the remove of the files after the error
- detection
-
-
-Sun Jan 11 17:27:53 1998 Stephan Kulow <coolo@kde.org>
-
- * acinclude.m4.in added a new macro KDE_CHECK_QT_DIRECT to unset
- the Qt library path, if a Qt program compiles without them
-
- * acinclude.m4.in added a return value in the CREATE_KFSSTND
- macro. Perhaps this has caused the problems
-
-Sat Jan 10 17:40:44 1998 Stephan Kulow <coolo@kde.org>
-
- * ChangeLog started to maintain a ChangeLog file again
- * acinclude.m4.in the AC_CREATE_KFSSTND to get better debug output
- to find the problem
-
-
-Old logs, Stephan Kulow made:
-
-0.1 : first steps with libkde
-0.2 : first release with libkde, khtmlw, kdehelp, acli, kwm, kpanel
-0.3 : added kfm and bugfixes
-0.4 : updated khtmlw, kdehelp, kwm, changed install in all subdirs
-0.5 : support libtool (chooseable shared libs)
-0.6 : split libkde in kdecore and kdeui
-0.6.1 : Bugfixes
-0.7 : added code from Janos Farkas (configure)
- : added @{kde,qt}_{includes,libraries}@
-0.7.1: Bugfixes
-0.7.2: Bugfixes
-0.7.3: added @all_includes@ and @all_libraries@
- replaced all incompatible flags like $(CC) and -DHAVE_UNISTD_H
-0.7.4: changed support for libkde (back in it's own)
- added kpat
- updated kpanel, kwm, kghostview
-0.8: removed a bug in kghostview
- lifted installation process of several apps
- splitt kdebase into kdelibs and kdeapps
- updated khtmlw, kfm and kdehelp
- added kcalc and kpaint
- updated kdisplay
- added kscreensaver
- added --enable-kscreensaver
- added --enable-debug (and @CXXFLAGS@ to all Makefile.ins)
- updated kwm to 0.4.7
- added make uninstall to every app
- added kvt
- added khexdit
- added .kdelnk for kmines, kedit, ktetris
- put kwm, kfind's .kdelnk in the right directories
- replaced --enable-kscreensaver by --disable-kscreensaver
- updated kpanel to 0.15
- some bugfixes (thanks Marco)
- some bugfixes (thanks Martin)
- changed acinclude.m4, because aclocal won't
- updated kwm to 0.4.8 (patched it again for Qt-1.2)
- updated kvt to 0.13 (patch from Matthias)
- patched kvt and kwm
- updated kwm to 0.5.0
- updated kvt for 0.14 (again and again :-)
- updated kview to 0.10
- updated kfm to 0.6.3
- patched kscreensaver for FreeBSD (thanks Marc)
-0.9: updated kdisplay to 0.5.3
- added klogout
- patches from Matthias
- updated kfm to 0.6.4
- updated kghostview to 0.4
- added QTINC and QTLIB
- updated kdehelp to 0.4.11
- patched kfm to support ktoolbar
- updated kedit to kedit+
- added kfontmanager 0.2.1
-0.9.1: changed kpaint's make style
- bugfixing
- updated kmines to 0.6.5
- updated ktetris to 0.2.4
- changed to Makefiles to depend on Makefile.in
- changed the Makefiles to let install depend on all
- added kjots-0.2.2
- updated kjots-0.2.3
- updated kfm to 0.6.6
- updated kjots-0.2.4
- updated kpaint-0.2
- updated kedit to 0.5
- updated kfontmanager to 0.2.2
- updated kfm to 0.6.7
- updated ktetris to 0.2.5
- updated kjots to 0.2.5
-0.10: added HAVE_SQRTL
- added HAVE_CRYPT_H
- updated kfind
- updated kfm to kfm-0.8.1
- re-introduced automake to kdebase
- bugfixes for the configure.in
- added XPM, GL and PAM tests to configure
- added morph3d to kscreensavers
- updated kfind to 0.3.2
- added some patches for SGI
-... lost the time to maintain a Changelog ;)
/ChangeLog
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: libtool.m4.in
===================================================================
--- libtool.m4.in (revision 3)
+++ libtool.m4.in (nonexistent)
@@ -1,868 +0,0 @@
-## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
- [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
- pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_RESTORE])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
- [AC_TRY_LINK([],
- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);],
- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
- case $host/$CC in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin* | *-*-pw32*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
- ;;
- ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-# Where MODE is either `yes' or `no'. If omitted, it defaults to
-# `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- re_direlt=['/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
-else
- lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw* |pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.[012])
- lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
- ;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
- ;;
- esac
- ;;
-
-freebsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
-
-irix5* | irix6*)
- case $host_os in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux*)
- case $host_cpu in
- alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
- else
- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
- fi
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
-
-openbsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case "$host_cpu" in
- i*86 )
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
- changequote([, ])dnl
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-newsos6)
- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
- break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
- break
- else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments. Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!). If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
- [],
- [define([AC_PROVIDE_IFELSE],
- [ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
/libtool.m4.in
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: config.guess
===================================================================
--- config.guess (revision 3)
+++ config.guess (nonexistent)
@@ -1,1325 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002 Free Software Foundation, Inc.
-
-timestamp='2002-01-23'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script.
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int dummy(){}" > $dummy.c ;
- for c in cc gcc c89 ; do
- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
- if test $? = 0 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- rm -f $dummy.c $dummy.o $dummy.rel ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- UNAME_MACHINE_ARCH=`(uname -p) 2>/dev/null` || \
- UNAME_MACHINE_ARCH=unknown
- case "${UNAME_MACHINE_ARCH}" in
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `./$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy
- fi ;;
- esac
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:3*)
- echo i386-pc-interix3
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- rm -f $dummy.c
- test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Export LANG=C to prevent ld from outputting information in other
- # languages.
- ld_supported_targets=`LANG=C; export LANG; cd /; ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- rm -f $dummy.c
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- if test "${UNAME_MACHINE}" = "x86pc"; then
- UNAME_MACHINE=pc
- fi
- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
/config.guess
Property changes:
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Author Date Id Revision
\ No newline at end of property
Index: old-ltcf-c.sh
===================================================================
--- old-ltcf-c.sh (revision 3)
+++ old-ltcf-c.sh (nonexistent)
@@ -1,815 +0,0 @@
-#### This script is meant to be sourced by ltconfig.
-
-# ltcf-c.sh - Create a C compiler specific configuration
-#
-# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-## Linker Characteristics
-case $host_os in
-cygwin* | mingw*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$with_gcc" != yes; then
- with_gnu_ld=no
- fi
- ;;
-
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX, the GNU linker is very broken
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=yes
-
- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
- test -f $output_objdir/impgen.exe || (cd $output_objdir && \
- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
- else $CC -o impgen impgen.c ; fi)~
- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
- # cygwin and mingw dlls have different entry points and sets of symbols
- # to exclude.
- # FIXME: what about values for MSVC?
- dll_entry=__cygwin_dll_entry@12
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
- case $host_os in
- mingw*)
- # mingw values
- dll_entry=_DllMainCRTStartup@12
- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
- ;;
- esac
-
- # mingw and cygwin differ, and it's simplest to just exclude the union
- # of the two symbol sets.
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
- ltdll_cmds=
- fi
-
- # Extract the symbol export list from an `--export-all' def file,
- # then regenerate the def file from the symbol export list, so that
- # the compiled dll only exports the symbol export list.
- # Be careful not to strip the DATA tag left be newer dlltools.
- export_symbols_cmds="$ltdll_cmds"'
- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname-def;
- else
- echo EXPORTS > $output_objdir/$soname-def;
- _lt_hint=1;
- cat $export_symbols | while read symbol; do
- set dummy \$symbol;
- case \[$]# in
- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
- esac;
- _lt_hint=`expr 1 + \$_lt_hint`;
- done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
- ;;
-
- darwin* | rhapsody*)
- allow_undefined_flag='-undefined suppress'
- archive_cmds='$CC `test .$module = .yes && echo -bundle || echo -dynamiclib` $allow_undefined_flag -o $lib $libobjs $deplibs $linkopts -install_name $rpath/$soname `test -n "$verstring" -a x$verstring != x0.0 && echo $verstring`'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- whole_archive_flag_spec='-all_load $convenience'
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- case "$host_os" in
- freebsd*)
- skip_need_lc_check=yes
- ;;
- esac
-
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- case $host_os in
- cygwin* | mingw*)
- # dlltool doesn't understand --whole-archive et. al.
- whole_archive_flag_spec=
- ;;
- *)
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- ;;
- esac
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$with_gcc" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- if test "$with_gcc" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- esac
- shared_flag='-shared'
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
-
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # KDE requires run time linking. Make it the default.
- aix_use_runtimelinking=yes
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
- # Let the compiler handle the export list.
- always_export_symbols=no
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other run time loading flags (-brtl), -berok will
- # link without error, but may produce a broken library.
- allow_undefined_flag=' ${wl}-berok'
- # The following three lines along with hardcode_into_libs=yes put the correct path into libraries.
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib'
- archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib'
- archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' -o $lib'
- archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
- else
- allow_undefined_flag=' ${wl}-berok'
- # -bexpall does not export symbols beginning with underscore (_)
- always_export_symbols=yes
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec=' '
- build_libtool_need_lc=yes
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
- # This is similar to how AIX traditionally builds it's shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- cygwin* | mingw*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- skip_need_lc_check=yes
- ;;
-
- hpux9* | hpux10* | hpux11*)
- case $host_os in
- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
- esac
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_minus_L=yes # Not in the search PATH, but as the default
- # location of the library.
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6*)
- if test "$with_gcc" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec='-rpath $libdir'
- hardcode_libdir_separator=:
- ;;
-
- sco3.2v5*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv5*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec=
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4.2uw2*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
-
- unixware7*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-## Compiler Characteristics: PIC flags, static flags, etc
-if test "X${ac_cv_prog_cc_pic+set}" = Xset; then
- :
-else
- ac_cv_prog_cc_pic=
- ac_cv_prog_cc_shlib=
- ac_cv_prog_cc_wl=
- ac_cv_prog_cc_static=
- ac_cv_prog_cc_no_builtin=
- ac_cv_prog_cc_can_build_shared=$can_build_shared
-
- if test "$with_gcc" = yes; then
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_cv_prog_cc_static='-Bstatic'
- else
- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- cygwin* | mingw* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- ac_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_cv_prog_cc_pic='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- ac_cv_prog_cc_pic=
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ac_cv_prog_cc_pic=-Kconform_pic
- fi
- ;;
- *)
- ac_cv_prog_cc_pic='-fPIC'
- ;;
- esac
- else
- # PORTME Check for PIC flags for the system compiler.
- case $host_os in
- aix*)
- # All AIX code is PIC.
- ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
- ;;
-
- hpux9* | hpux10* | hpux11*)
- # Is there a better ac_cv_prog_cc_static that works with the bundled CC?
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
- ac_cv_prog_cc_pic='+Z'
- ;;
-
- irix5* | irix6*)
- ac_cv_prog_cc_wl='-Wl,'
- ac_cv_prog_cc_static='-non_shared'
- # PIC (with -KPIC) is the default.
- ;;
-
- cygwin* | mingw* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- ac_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
-
- linux*)
- case "$CC" in
- ccc*)
- # Compaq C
- # It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- ac_cv_prog_cc_static='-non_shared'
- ;;
- KCC*)
- # KAI C++