Subversion Repositories Scribus

Compare Revisions

Regard whitespace Rev 14098 → Rev 14099

/trunk/Scribus/resources/translations/po/scribus.en_GB.ts
0,0 → 1,35836
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="en_GB">
<context>
<name></name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation>deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation>deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="191"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="201"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="213"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation>moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation>moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation>redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation>getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation>setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation>setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="44"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="54"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="64"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="74"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="84"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="94"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="107"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="154"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="168"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="180"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="192"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation>createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation>createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation>setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="315"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="328"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="345"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="358"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="372"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="385"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="399"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="414"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="426"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation>scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="120"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="135"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="167"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="180"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="obsolete">setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="obsolete">setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="obsolete">messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="obsolete">textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="obsolete">getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="obsolete">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation type="obsolete">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="obsolete">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
<source>Importing: %1</source>
<translation>Importing: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
<source>Analyzing File:</source>
<translation>Analysing File:</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="265"/>
<source>Group%1</source>
<translation>Group%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2469"/>
<source>Generating Items</source>
<translation>Generating Items</translation>
</message>
</context>
<context>
<name>About</name>
<message>
<location filename="../../scribus/about.cpp" line="305"/>
<source>Contributions from:</source>
<translation>Contributions from:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="188"/>
<source>&amp;About</source>
<translation>&amp;About</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="201"/>
<source>A&amp;uthors</source>
<translation>A&amp;uthors</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="215"/>
<source>&amp;Translations</source>
<translation>&amp;Translations</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="226"/>
<source>&amp;Online</source>
<translation>&amp;Online</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="265"/>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="297"/>
<source>Development Team:</source>
<translation>Development Team:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="307"/>
<source>Official Documentation:</source>
<translation>Official Documentation:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="311"/>
<source>Other Documentation:</source>
<translation>Other Documentation:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="345"/>
<source>Homepage</source>
<translation>Homepage</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="347"/>
<source>Online Reference</source>
<translation>Online Reference</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="351"/>
<source>Bugs and Feature Requests</source>
<translation>Bugs and Feature Requests</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="355"/>
<source>Mailing List</source>
<translation>Mailing List</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="329"/>
<source>Official Translations and Translators:</source>
<translation>Official Translations and Translators:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="331"/>
<source>Previous Translation Contributors:</source>
<translation>Previous Translation Contributors:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="97"/>
<source>About Scribus %1</source>
<translation>About Scribus %1</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="349"/>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="125"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="133"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="183"/>
<source>Using Ghostscript version %1</source>
<translation>Using Ghostscript version %1</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="185"/>
<source>No Ghostscript version available</source>
<translation>No Ghostscript version available</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>Build ID:</source>
<translation>Build ID:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="299"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="303"/>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="317"/>
<source>Tango Project Icons:</source>
<translation>Tango Project Icons:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="229"/>
<source>&amp;Updates</source>
<translation>&amp;Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="0"/>
<source>Check for &amp;Updates</source>
<translation type="obsolete">Check for &amp;Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="277"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Check for updates to Scribus. No data from your machine will be transferred off it.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="301"/>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="315"/>
<source>Splash Screen:</source>
<translation>Splash Screen:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="273"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>This panel shows the version, build date and compiled in library support in Scribus.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="274"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="275"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="276"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>The Windows version does not use fontconfig or CUPS libraries.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>Scribus Version</source>
<translation>Scribus Version</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="649"/>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="647"/>
<source>Abort Update Check</source>
<translation>Abort Update Check</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="353"/>
<source>Developer Blog</source>
<translation>Developer Blog</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="240"/>
<source>&amp;Licence</source>
<translation>&amp;Licence</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="249"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="309"/>
<source>Doc Translators:</source>
<translation>Doc Translators:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="313"/>
<source>Webmasters:</source>
<translation>Webmasters:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="625"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation>Filename:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation>Version:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation>Enabled:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation>Release Date:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation>Description:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation>Author(s):</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation>Copyright:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation>License:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: About Plug-ins</translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<source>&amp;Image Effects</source>
<translation>&amp;Image Effects</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<source>&amp;Tabulators...</source>
<translation>&amp;Tabulators...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<source>&amp;New</source>
<translation>&amp;New</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
<source>&amp;Open...</source>
<translation>&amp;Open...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<source>&amp;Save</source>
<translation>&amp;Save</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<source>Save &amp;As...</source>
<translation>Save &amp;As...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<source>Re&amp;vert to Saved</source>
<translation>Re&amp;vert to Saved</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<source>Collect for O&amp;utput...</source>
<translation>Collect for O&amp;utput...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<source>Get Text...</source>
<translation>Get Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<source>Append &amp;Text...</source>
<translation>Append &amp;Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1267"/>
<source>Get Image...</source>
<translation>Get Image...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<source>Save &amp;Text...</source>
<translation>Save &amp;Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<source>Save as P&amp;DF...</source>
<translation>Save as P&amp;DF...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
<source>Document &amp;Setup...</source>
<translation>Document &amp;Setup...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<source>&amp;Print...</source>
<translation>&amp;Print...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1277"/>
<source>&amp;Quit</source>
<translation>&amp;Quit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<source>&amp;Undo</source>
<translation>&amp;Undo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
<source>&amp;Redo</source>
<translation>&amp;Redo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<source>&amp;Item Action Mode</source>
<translation>&amp;Item Action Mode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<source>Cu&amp;t</source>
<translation>Cu&amp;t</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1285"/>
<source>&amp;Copy</source>
<translation>&amp;Copy</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1286"/>
<source>&amp;Paste</source>
<translation>&amp;Paste</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<source>Select &amp;All</source>
<translation>Select &amp;All</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1291"/>
<source>&amp;Deselect All</source>
<translation>&amp;Deselect All</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1292"/>
<source>&amp;Search/Replace...</source>
<translation>&amp;Search/Replace...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1295"/>
<source>C&amp;olors...</source>
<translation>C&amp;olours...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
<source>&amp;Master Pages...</source>
<translation>&amp;Master Pages...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>P&amp;references...</source>
<translation>P&amp;references...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1307"/>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1309"/>
<source>&amp;Other...</source>
<translation>&amp;Other...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1310"/>
<source>&amp;Left</source>
<translation>&amp;Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1311"/>
<source>&amp;Center</source>
<translation>&amp;Centre</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1312"/>
<source>&amp;Right</source>
<translation>&amp;Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1313"/>
<source>&amp;Block</source>
<translation>&amp;Block</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<source>&amp;Forced</source>
<translation>&amp;Forced</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>&amp;%1 %</source>
<translation type="obsolete">&amp;%1 %</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Normal</source>
<translation>&amp;Normal</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<source>&amp;Underline</source>
<translation>&amp;Underline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<source>Underline &amp;Words</source>
<translation>Underline &amp;Words</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
<source>&amp;Strike Through</source>
<translation>&amp;Strike Through</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<source>&amp;All Caps</source>
<translation>&amp;All Caps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<source>Small &amp;Caps</source>
<translation>Small &amp;Caps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<source>Su&amp;perscript</source>
<translation>Su&amp;perscript</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<source>Su&amp;bscript</source>
<translation>Su&amp;bscript</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<source>D&amp;uplicate</source>
<translation>D&amp;uplicate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<source>&amp;Multiple Duplicate</source>
<translation>&amp;Multiple Duplicate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<source>&amp;Delete</source>
<translation>&amp;Delete</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<source>&amp;Group</source>
<translation>&amp;Group</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<source>&amp;Ungroup</source>
<translation>&amp;Ungroup</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<source>Is &amp;Locked</source>
<translation>Is &amp;Locked</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<source>Si&amp;ze is Locked</source>
<translation>Si&amp;ze is Locked</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<source>Lower to &amp;Bottom</source>
<translation>Lower to &amp;Bottom</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<source>Raise to &amp;Top</source>
<translation>Raise to &amp;Top</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<source>&amp;Lower</source>
<translation>&amp;Lower</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<source>&amp;Raise</source>
<translation>&amp;Raise</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<source>Send to S&amp;crapbook</source>
<translation>Send to S&amp;crapbook</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<source>&amp;Attributes...</source>
<translation>&amp;Attributes...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<source>I&amp;mage Visible</source>
<translation>I&amp;mage Visible</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<source>Is PDF &amp;Bookmark</source>
<translation>Is PDF &amp;Bookmark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<source>Is PDF A&amp;nnotation</source>
<translation>Is PDF A&amp;nnotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<source>Annotation P&amp;roperties</source>
<translation>Annotation P&amp;roperties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1369"/>
<source>Field P&amp;roperties</source>
<translation>Field P&amp;roperties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1370"/>
<source>&amp;Edit Shape...</source>
<translation>&amp;Edit Shape...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<source>&amp;Attach Text to Path</source>
<translation>&amp;Attach Text to Path</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<source>&amp;Detach Text from Path</source>
<translation>&amp;Detach Text from Path</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<source>&amp;Combine Polygons</source>
<translation>&amp;Combine Polygons</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<source>Split &amp;Polygons</source>
<translation>Split &amp;Polygons</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<source>&amp;Bezier Curve</source>
<translation>&amp;Bezier Curve</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
<source>&amp;Image Frame</source>
<translation>&amp;Image Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<source>&amp;Polygon</source>
<translation>&amp;Polygon</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<source>&amp;Text Frame</source>
<translation>&amp;Text Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<source>&amp;Glyph...</source>
<translation>&amp;Glyph...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<source>Sample Text</source>
<translation>Sample Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<source>&amp;Insert...</source>
<translation>&amp;Insert...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<source>Im&amp;port...</source>
<translation>Im&amp;port...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<source>&amp;Delete...</source>
<translation>&amp;Delete...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<source>&amp;Copy...</source>
<translation>&amp;Copy...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<source>&amp;Move...</source>
<translation>&amp;Move...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<source>&amp;Apply Master Page...</source>
<translation>&amp;Apply Master Page...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
<source>Manage &amp;Guides...</source>
<translation>Manage &amp;Guides...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
<source>Show &amp;Margins</source>
<translation>Show &amp;Margins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1409"/>
<source>Show &amp;Frames</source>
<translation>Show &amp;Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<source>Show &amp;Images</source>
<translation>Show &amp;Images</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1412"/>
<source>Show &amp;Grid</source>
<translation>Show &amp;Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1413"/>
<source>Show G&amp;uides</source>
<translation>Show G&amp;uides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<source>Show &amp;Baseline Grid</source>
<translation>Show &amp;Baseline Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<source>Show &amp;Text Chain</source>
<translation>Show &amp;Text Chain</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<source>Sn&amp;ap to Grid</source>
<translation>Sn&amp;ap to Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<source>Sna&amp;p to Guides</source>
<translation>Sna&amp;p to Guides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<source>&amp;Properties</source>
<translation>&amp;Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<source>&amp;Scrapbook</source>
<translation>&amp;Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<source>&amp;Layers</source>
<translation>&amp;Layers</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<source>&amp;Bookmarks</source>
<translation>&amp;Bookmarks</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<source>&amp;Measurements</source>
<translation>&amp;Measurements</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1433"/>
<source>Action &amp;History</source>
<translation>Action &amp;History</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<source>Preflight &amp;Verifier</source>
<translation>Preflight &amp;Verifier</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<source>&amp;Tools</source>
<translation>&amp;Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<source>P&amp;DF Tools</source>
<translation>P&amp;DF Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<source>Select Item</source>
<translation>Select Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<source>Rotate Item</source>
<translation>Rotate Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<source>Zoom in or out</source>
<translation>Zoom in or out</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
<source>Zoom in</source>
<translation>Zoom in</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<source>Zoom out</source>
<translation>Zoom out</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1445"/>
<source>Edit Contents of Frame</source>
<translation>Edit Contents of Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<source>Link Text Frames</source>
<translation>Link Text Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<source>Unlink Text Frames</source>
<translation>Unlink Text Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
<source>&amp;Eye Dropper</source>
<translation>&amp;Eye Dropper</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<source>Copy Item Properties</source>
<translation>Copy Item Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">&amp;Manage Pictures</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<source>&amp;Hyphenate Text</source>
<translation>&amp;Hyphenate Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<source>&amp;Generate Table Of Contents</source>
<translation>&amp;Generate Table Of Contents</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1482"/>
<source>&amp;About Scribus</source>
<translation>&amp;About Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<source>About &amp;Qt</source>
<translation>About &amp;Qt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<source>Toolti&amp;ps</source>
<translation>Toolti&amp;ps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1487"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribus &amp;Manual...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<source>Smart &amp;Hyphen</source>
<translation>Smart &amp;Hyphen</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<source>Non Breaking &amp;Space</source>
<translation>Non Breaking &amp;Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
<source>Page &amp;Number</source>
<translation>Page &amp;Number</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<source>Copyright</source>
<translation>Copyright</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<source>Registered Trademark</source>
<translation>Registered Trademark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<source>Trademark</source>
<translation>Trademark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<source>Bullet</source>
<translation>Bullet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<source>Em Dash</source>
<translation>Em Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<source>En Dash</source>
<translation>En Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<source>Figure Dash</source>
<translation>Figure Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<source>Quotation Dash</source>
<translation>Quotation Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Toggle Palettes</source>
<translation>Toggle Palettes</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<source>S&amp;hadow</source>
<translation>S&amp;hadow</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<source>&amp;Low Resolution</source>
<translation>&amp;Low Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1364"/>
<source>&amp;Normal Resolution</source>
<translation>&amp;Normal Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1365"/>
<source>&amp;Full Resolution</source>
<translation>&amp;Full Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1293"/>
<source>Edit Image...</source>
<translation>Edit Image...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
<source>&amp;Update Image</source>
<translation>&amp;Update Image</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<source>Adjust Frame to Image</source>
<translation>Adjust Frame to Image</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<source>Extended Image Properties</source>
<translation>Extended Image Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<source>Show Control Characters</source>
<translation>Show Control Characters</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<source>&amp;Align and Distribute</source>
<translation>&amp;Align and Distribute</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<source>Edit Text...</source>
<translation>Edit Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<source>New Line</source>
<translation>New Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<source>Frame Break</source>
<translation>Frame Break</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<source>Column Break</source>
<translation>Column Break</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<source>Non Breaking Dash</source>
<translation>Non Breaking Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<source>Toggle Guides</source>
<translation>Toggle Guides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<source>&amp;Arrange Pages</source>
<translation>&amp;Arrange Pages</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<source>Dehyphenate Text</source>
<translation>Dehyphenate Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1396"/>
<source>Manage Page Properties...</source>
<translation>Manage Page Properties...</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation type="obsolete">Rulers relative to Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1276"/>
<source>Print Previe&amp;w</source>
<translation>Print Previe&amp;w</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1300"/>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScripts...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<source>Convert to Master Page...</source>
<translation>Convert to Master Page...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<source>&amp;Cascade</source>
<translation>&amp;Cascade</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<source>&amp;Tile</source>
<translation>&amp;Tile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">&amp;About Plug-ins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<source>More Info...</source>
<translation>More Info...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>&amp;Printing Enabled</source>
<translation>&amp;Printing Enabled</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Flip Horizontally</source>
<translation>&amp;Flip Horizontally</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Flip Vertically</source>
<translation>&amp;Flip Vertically</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>Show Rulers</source>
<translation>Show Rulers</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Solidus</source>
<translation>Solidus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Middle Dot</source>
<translation>Middle Dot</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1545"/>
<source>En Space</source>
<translation>En Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1546"/>
<source>Em Space</source>
<translation>Em Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1547"/>
<source>Thin Space</source>
<translation>Thin Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1548"/>
<source>Thick Space</source>
<translation>Thick Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1549"/>
<source>Mid Space</source>
<translation>Mid Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
<source>Hair Space</source>
<translation>Hair Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1562"/>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1563"/>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1564"/>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1565"/>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1566"/>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1567"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1568"/>
<source>st</source>
<translation>st</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>S&amp;tyles...</source>
<translation>S&amp;tyles...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>&amp;Outlines</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>Paste (&amp;Absolute)</source>
<translation>Paste (&amp;Absolute)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>C&amp;lear</source>
<translation>C&amp;lear</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>Insert PDF Push Button</source>
<translation>Insert PDF Push Button</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Insert PDF Text Field</source>
<translation>Insert PDF Text Field</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<source>Insert PDF Check Box</source>
<translation>Insert PDF Check Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1465"/>
<source>Insert PDF Combo Box</source>
<translation>Insert PDF Combo Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<source>Insert PDF List Box</source>
<translation>Insert PDF List Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>Insert Text Annotation</source>
<translation>Insert Text Annotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert Link Annotation</source>
<translation>Insert Link Annotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Save as &amp;EPS...</source>
<translation>Save as &amp;EPS...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<source>Show Text Frame Columns</source>
<translation>Show Text Frame Columns</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>&amp;Frame...</source>
<translation>&amp;Frame...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Preview Mode</source>
<translation>Preview Mode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<source>Show Layer Indicators</source>
<translation>Show Layer Indicators</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<source>Patterns...</source>
<translation>Patterns...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>Send to Patterns</source>
<translation>Send to Patterns</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<source>Sticky Tools</source>
<translation>Sticky Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<source>&amp;Fit to Height</source>
<translation>&amp;Fit to Height</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<source>Fit to Width</source>
<translation>Fit to Width</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1408"/>
<source>Show Bleeds</source>
<translation>Show Bleeds</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<source>&amp;Zero Width Space</source>
<translation>&amp;Zero Width Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<source>Zero Width NB Space</source>
<translation>Zero Width NB Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>Apostrophe</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1527"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>Straight Double</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1528"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>Single Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1529"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>Single Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1530"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>Double Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1531"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>Double Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1532"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>Single Reversed</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1533"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>Double Reversed</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1534"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>Single Left Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1535"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>Single Right Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1536"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>Double Left Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1537"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>Double Right Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1538"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>Low Single Comma</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1539"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>Low Double Comma</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1540"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>CJK Single Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1541"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>CJK Single Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1542"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>CJK Double Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1543"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>CJK Double Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1278"/>
<source>Edit Latex Source...</source>
<translation type="obsolete">Edit Latex Source...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<source>Insert &amp;Text Frame</source>
<translation>Insert &amp;Text Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1453"/>
<source>Insert &amp;Image Frame</source>
<translation>Insert &amp;Image Frame</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1434"/>
<source>Insert &amp;Latex Frame</source>
<translation type="obsolete">Insert &amp;Latex Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1455"/>
<source>Insert T&amp;able</source>
<translation>Insert T&amp;able</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<source>Insert &amp;Shape</source>
<translation>Insert &amp;Shape</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<source>Insert &amp;Polygon</source>
<translation>Insert &amp;Polygon</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1458"/>
<source>Insert &amp;Line</source>
<translation>Insert &amp;Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1459"/>
<source>Insert &amp;Bezier Curve</source>
<translation>Insert &amp;Bezier Curve</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1460"/>
<source>Insert &amp;Freehand Line</source>
<translation>Insert &amp;Freehand Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
<source>Scribus Homepage</source>
<translation>Scribus Homepage</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1489"/>
<source>Scribus Online Documentation</source>
<translation>Scribus Online Documentation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<source>Getting Started with Scribus</source>
<translation>Getting Started with Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
<source>Show Context Menu</source>
<translation>Show Context Menu</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1472"/>
<source>&amp;Manage Images</source>
<translation>&amp;Manage Images</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1483"/>
<source>&amp;About Plugins</source>
<translation>&amp;About Plugins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Insert Unicode Character Begin Sequence</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
<source>Get Vector File...</source>
<translation>Get Vector File...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1290"/>
<source>Advanced Select All...</source>
<translation>Advanced Select All...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>Edit Source...</source>
<translation>Edit Source...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1296"/>
<source>Replace Colors...</source>
<translation>Replace Colours...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<source>Rulers Relative to Page</source>
<translation>Rulers Relative to Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
<source>Insert &amp;Render Frame</source>
<translation>Insert &amp;Render Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1492"/>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<source>Number of Pages</source>
<translation>Number of Pages</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<source>Adjust Image to Frame</source>
<translation>Adjust Image to Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>Move/Resize value indicator</source>
<translation type="obsolete">Move/Resize value indicator</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>File</source>
<translation>File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>Edit</source>
<translation>Edit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>&amp;Edit</source>
<translation>&amp;Edit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>Style</source>
<translation>Style</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>&amp;Style</source>
<translation>&amp;Style</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>Item</source>
<translation>Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>&amp;Item</source>
<translation>&amp;Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>Insert</source>
<translation>Insert</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>I&amp;nsert</source>
<translation>I&amp;nsert</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>&amp;Page</source>
<translation>&amp;Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>View</source>
<translation>View</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>&amp;View</source>
<translation>&amp;View</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>Extras</source>
<translation>Extras</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>E&amp;xtras</source>
<translation>E&amp;xtras</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>Windows</source>
<translation>Windows</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>&amp;Windows</source>
<translation>&amp;Windows</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>&amp;Help</source>
<translation>&amp;Help</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1876"/>
<source>Plugin Menu Items</source>
<translation>Plugin Menu Items</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1878"/>
<source>Others</source>
<translation>Others</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1880"/>
<source>Unicode Characters</source>
<translation>Unicode Characters</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Move/Resize Value Indicator</source>
<translation>Move/Resize Value Indicator</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<source>New &amp;from Template...</source>
<translation>New &amp;from Template...</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
<message>
<location filename="../../scribus/adjustcmsdialog.cpp" line="16"/>
<source>CMS Settings</source>
<translation>CMS Settings</translation>
</message>
</context>
<context>
<name>AlignDistribute</name>
<message>
<location filename="../../scribus/aligndistribute.ui" line="35"/>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="79"/>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="92"/>
<source>&amp;Relative To:</source>
<translation>&amp;Relative To:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="431"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="270"/>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="490"/>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="90"/>
<source>Align and Distribute</source>
<translation>Align and Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="93"/>
<source>&amp;Relative to:</source>
<translation>&amp;Relative to:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="96"/>
<source>First Selected</source>
<translation>First Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="97"/>
<source>Last Selected</source>
<translation>Last Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="98"/>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="99"/>
<source>Margins</source>
<translation>Margins</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="101"/>
<source>Selection</source>
<translation>Selection</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="111"/>
<source>Align bottoms</source>
<translation>Align bottoms</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="113"/>
<source>Align right sides</source>
<translation>Align right sides</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="117"/>
<source>Center on vertical axis</source>
<translation>Centre on vertical axis</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="119"/>
<source>Align left sides</source>
<translation>Align left sides</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="121"/>
<source>Center on horizontal axis</source>
<translation>Centre on horizontal axis</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="125"/>
<source>Align tops</source>
<translation>Align tops</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="145"/>
<source>Distribute left sides equidistantly</source>
<translation>Distribute left sides equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="137"/>
<source>Distribute bottoms equidistantly</source>
<translation>Distribute bottoms equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="139"/>
<source>Distribute centers equidistantly horizontally</source>
<translation>Distribute centres equidistantly horizontally</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="147"/>
<source>Distribute centers equidistantly vertically</source>
<translation>Distribute centres equidistantly vertically</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="149"/>
<source>Distribute tops equidistantly</source>
<translation>Distribute tops equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="135"/>
<source>Distribute right sides equidistantly</source>
<translation>Distribute right sides equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="100"/>
<source>Guide</source>
<translation>Guide</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="127"/>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="159"/>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="160"/>
<source>Distribute the items with the distance specified</source>
<translation>Distribute the items with the distance specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="162"/>
<source>None Selected</source>
<translation>None Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="440"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="448"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="107"/>
<source>Align right sides of items to left side of anchor</source>
<translation>Align right sides of items to left side of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="109"/>
<source>Align left sides of items to right side of anchor</source>
<translation>Align left sides of items to right side of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="115"/>
<source>Align tops of items to bottom of anchor</source>
<translation>Align tops of items to bottom of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="123"/>
<source>Align bottoms of items to top of anchor</source>
<translation>Align bottoms of items to top of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="130"/>
<source>Make horizontal gaps between items equal</source>
<translation>Make horizontal gaps between items equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="132"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>Make horizontal gaps between items equal to the value specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="141"/>
<source>Make vertical gaps between items equal</source>
<translation>Make vertical gaps between items equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="143"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>Make vertical gaps between items equal to the value specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="151"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>Make horizontal gaps between items and sides of page equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="157"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>Make vertical gaps between items and the top and bottom of page margins equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="155"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>Make horizontal gaps between items and sides of page margins equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>Make vertical gaps between items and the top and bottom of page equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="103"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="105"/>
<source>The location of the selected guide to align to</source>
<translation>The location of the selected guide to align to</translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<location filename="../../scribus/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>Align Text Left</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>Align Text Right</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>Align Text Centre</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>Align Text Justified</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>Align Text Forced Justified</translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<location filename="../../scribus/annot.cpp" line="61"/>
<source>Field Properties</source>
<translation>Field Properties</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="533"/>
<source>Type:</source>
<translation>Type:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Button</source>
<translation>Button</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Text Field</source>
<translation>Text Field</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Check Box</source>
<translation>Check Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Combo Box</source>
<translation>Combo Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>List Box</source>
<translation>List Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="111"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="121"/>
<source>Name:</source>
<translation>Name:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="274"/>
<source>Text</source>
<translation>Text</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="176"/>
<source>Border</source>
<translation>Border</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="182"/>
<source>Color:</source>
<translation>Colour:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2104"/>
<source>None</source>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="197"/>
<source>Width:</source>
<translation>Width:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Thin</source>
<translation>Thin</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="311"/>
<source>Normal</source>
<translation>Normal</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Wide</source>
<translation>Wide</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="209"/>
<source>Style:</source>
<translation>Style:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Solid</source>
<translation>Solid</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Dashed</source>
<translation>Dashed</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Underline</source>
<translation>Underline</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Beveled</source>
<translation>Beveled</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Inset</source>
<translation>Inset</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="224"/>
<source>Other</source>
<translation>Other</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="230"/>
<source>Read Only</source>
<translation>Read Only</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="236"/>
<source>Required</source>
<translation>Required</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="248"/>
<source>Visibility:</source>
<translation>Visibility:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Visible</source>
<translation>Visible</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Hidden</source>
<translation>Hidden</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>No Print</source>
<translation>No Print</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="253"/>
<source>No View</source>
<translation>No View</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="262"/>
<source>Appearance</source>
<translation>Appearance</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="280"/>
<source>Text for Button Down</source>
<translation>Text for Button Down</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="283"/>
<source>Text for Roll Over</source>
<translation>Text for Roll Over</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="294"/>
<source>Icons</source>
<translation>Icons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="300"/>
<source>Use Icons</source>
<translation>Use Icons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="357"/>
<source>Remove</source>
<translation>Remove</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="329"/>
<source>Pressed</source>
<translation>Pressed</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="347"/>
<source>Roll Over</source>
<translation>Roll Over</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="366"/>
<source>Icon Placement...</source>
<translation>Icon Placement...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="414"/>
<source>Highlight</source>
<translation>Highlight</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Invert</source>
<translation>Invert</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Outlined</source>
<translation>Outlined</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Push</source>
<translation>Push</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="438"/>
<source>Multi-Line</source>
<translation>Multi-Line</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="442"/>
<source>Password</source>
<translation>Password</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<source>Limit of</source>
<translation>Limit of</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="460"/>
<source>Characters</source>
<translation>Characters</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="466"/>
<source>Do Not Scroll</source>
<translation>Do Not Scroll</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="470"/>
<source>Do Not Spell Check</source>
<translation>Do Not Spell Check</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="485"/>
<source>Check Style:</source>
<translation>Check Style:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Check</source>
<translation>Check</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Cross</source>
<translation>Cross</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Diamond</source>
<translation>Diamond</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Circle</source>
<translation>Circle</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Star</source>
<translation>Star</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Square</source>
<translation>Square</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<source>Default is Checked</source>
<translation>Default is Checked</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="514"/>
<source>Editable</source>
<translation>Editable</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="521"/>
<source>Options</source>
<translation>Options</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>Go To</source>
<translation>Go To</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Submit Form</source>
<translation>Submit Form</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Reset Form</source>
<translation>Reset Form</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Import Data</source>
<translation>Import Data</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="570"/>
<source>Event:</source>
<translation>Event:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Up</source>
<translation>Mouse Up</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Down</source>
<translation>Mouse Down</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Enter</source>
<translation>Mouse Enter</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>Mouse Exit</source>
<translation>Mouse Exit</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Focus</source>
<translation>On Focus</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Blur</source>
<translation>On Blur</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="585"/>
<source>Script:</source>
<translation>Script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1111"/>
<source>Edit...</source>
<translation>Edit...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="670"/>
<source>Submit to URL:</source>
<translation>Submit to URL:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="678"/>
<source>Submit Data as HTML</source>
<translation type="obsolete">Submit Data as HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="707"/>
<source>Import Data from:</source>
<translation>Import Data from:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="610"/>
<source>Destination</source>
<translation>Destination</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="616"/>
<source>To File:</source>
<translation>To File:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="623"/>
<source>Change...</source>
<translation>Change...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="632"/>
<source>Page:</source>
<translation>Page:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="646"/>
<source>X-Pos:</source>
<translation>X-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="658"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="654"/>
<source>Y-Pos:</source>
<translation>Y-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="716"/>
<source>Action</source>
<translation>Action</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="747"/>
<source>Field is formatted as:</source>
<translation>Field is formatted as:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Plain</source>
<translation>Plain</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Number</source>
<translation>Number</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Percentage</source>
<translation>Percentage</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Date</source>
<translation>Date</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Time</source>
<translation>Time</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Custom</source>
<translation>Custom</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="768"/>
<source>Number Format</source>
<translation>Number Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="836"/>
<source>Decimals:</source>
<translation>Decimals:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="791"/>
<source>Use Currency Symbol</source>
<translation>Use Currency Symbol</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="800"/>
<source>Prepend Currency Symbol</source>
<translation>Prepend Currency Symbol</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="847"/>
<source>Formatting</source>
<translation>Formatting</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="827"/>
<source>Percent Format</source>
<translation>Percent Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="870"/>
<source>Date Format</source>
<translation>Date Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="896"/>
<source>Time Format</source>
<translation>Time Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="918"/>
<source>Custom Scripts</source>
<translation>Custom Scripts</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="930"/>
<source>Format:</source>
<translation>Format:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="956"/>
<source>Keystroke:</source>
<translation>Keystroke:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="980"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="996"/>
<source>Value is not validated</source>
<translation>Value is not validated</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1005"/>
<source>Value must be greater than or equal to:</source>
<translation>Value must be greater than or equal to:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1009"/>
<source>and less or equal to:</source>
<translation>and less or equal to:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1020"/>
<source>Custom validate script:</source>
<translation>Custom validate script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1041"/>
<source>Validate</source>
<translation>Validate</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1058"/>
<source>Value is not calculated</source>
<translation>Value is not calculated</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1067"/>
<source>Value is the</source>
<translation>Value is the</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>sum</source>
<translation>sum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>product</source>
<translation>product</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>average</source>
<translation>average</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>minimum</source>
<translation>minimum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1073"/>
<source>maximum</source>
<translation>maximum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1080"/>
<source>of the following fields:</source>
<translation>of the following fields:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1090"/>
<source>Pick...</source>
<translation>Pick...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1095"/>
<source>Custom calculation script:</source>
<translation>Custom calculation script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1115"/>
<source>Calculate</source>
<translation>Calculate</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1134"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1138"/>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1191"/>
<source>Enter a comma separated list of fields here</source>
<translation>Enter a comma separated list of fields here</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1192"/>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>You need at least the Icon for Normal to use Icons for Buttons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1469"/>
<source>Example:</source>
<translation>Example:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2096"/>
<source>Selection Change</source>
<translation>Selection Change</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="152"/>
<source>Font for use with PDF 1.3:</source>
<translation>Font for use with PDF 1.3:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1190"/>
<source>Flag is ignored for PDF 1.3</source>
<translation>Flag is ignored for PDF 1.3</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDF Files (*.pdf);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2105"/>
<source>JavaScript</source>
<translation>JavaScript</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>None</source>
<comment>highlight</comment>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>None</source>
<comment>action</comment>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation>Tooltip:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation>Do Not Export Value</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1358"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1303"/>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="625"/>
<source>Export absolute Filename</source>
<translation>Export absolute Filename</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="682"/>
<source>Submit format:</source>
<translation>Submit format:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>FDF</source>
<translation>FDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>HTML</source>
<translation>HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>XFDF</source>
<translation>XFDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>PDF</source>
<translation>PDF</translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<location filename="../../scribus/annota.cpp" line="47"/>
<source>Annotation Properties</source>
<translation>Annotation Properties</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="77"/>
<source>Text</source>
<translation>Text</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="78"/>
<source>Link</source>
<translation>Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="79"/>
<source>External Link</source>
<translation>External Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>External Web-Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="118"/>
<source>Destination</source>
<translation>Destination</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="177"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="82"/>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="129"/>
<source>C&amp;hange...</source>
<translation>C&amp;hange...</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="147"/>
<source>&amp;Page:</source>
<translation>&amp;Page:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="171"/>
<source>&amp;X-Pos</source>
<translation>&amp;X-Pos</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="179"/>
<source>&amp;Y-Pos:</source>
<translation>&amp;Y-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>%1;;All Files (*)</source>
<translation>%1;;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="131"/>
<source>Export absolute Filename</source>
<translation>Export absolute Filename</translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
<source>Apply Master Page</source>
<translation>Apply Master Page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
<source>&amp;Master Page:</source>
<translation>&amp;Master Page:</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply To</source>
<translation type="obsolete">Apply To</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;page</source>
<translation type="obsolete">Current &amp;page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even pages</source>
<translation type="obsolete">&amp;Even pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd pages</source>
<translation type="obsolete">O&amp;dd pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All pages</source>
<translation type="obsolete">&amp;All pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within range</source>
<translation type="obsolete">&amp;Within range</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
<source>to</source>
<translation>to</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>Apply the selected master page to even, odd or all pages within the following range</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation>Possible Hyphenation</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply to</source>
<translation>Apply to</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;Page</source>
<translation>Current &amp;Page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even Pages</source>
<translation>&amp;Even Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd Pages</source>
<translation>O&amp;dd Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All Pages</source>
<translation>&amp;All Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within Range</source>
<translation>&amp;Within Range</translation>
</message>
</context>
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
<source>Spell-checking support</source>
<translation>Spell-checking support</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
<source>Aspell Plugin Error</source>
<translation>Aspell Plugin Error</translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<source>Spell Check</source>
<translation>Spell Check</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
<source>Replacement:</source>
<translation>Replacement:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
<source>&amp;Add Word</source>
<translation>&amp;Add Word</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
<source>&amp;Change</source>
<translation>&amp;Change</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="351"/>
<source>&amp;Exit</source>
<translation type="obsolete">&amp;Exit</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
<source>Not in Dictionary:</source>
<translation>Not in Dictionary:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
<source>Word that was not found in the active dictionary</source>
<translation>Word that was not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation>Replacement text for the current word that was not found in the dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
<source>Active Dictionary: </source>
<translation>Active Dictionary: </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
<source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
<source>Ignore the current text not found in the active dictionary</source>
<translation>Ignore the current text not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
<source>&amp;Ignore</source>
<translation>&amp;Ignore</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation>Ignore all occurrences of the current text not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
<source>I&amp;gnore All</source>
<translation>I&amp;gnore All</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation>Add the current word to the your personal spelling dictionary for future use</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation>Change the current word that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
<source>Change A&amp;ll</source>
<translation>Change A&amp;ll</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
<source>Close</source>
<translation>Close</translation>
</message>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source>Loaded </source>
<translation>Loaded </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source>default </source>
<translation>default </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source> aspell dictionary.</source>
<translation> aspell dictionary.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="84"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="91"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="359"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
<source> by adding it to the session list.</source>
<translation> by adding it to the session list.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="382"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="235"/>
<source>Spelling check complete</source>
<translation>Spelling check complete</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="427"/>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="62"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation>No available Aspell dictionaries found. Install some, please.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="429"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation>Do you want start from the beginning of the selection with new language selected?</translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
<source>Arrows</source>
<translation>Arrows</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
<source>Flow Chart</source>
<translation>Flow Chart</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
<source>Jigsaw</source>
<translation>Jigsaw</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
<source>Specials</source>
<translation>Specials</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
<source>Default Shapes</source>
<translation>Default Shapes</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="0"/>
<source>&amp;Barcode Generator...</source>
<translation type="obsolete">&amp;Barcode Generator...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">Scribus frontend for Pure Postscript Barcode Writer</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<source>&amp;Barcode...</source>
<translation>&amp;Barcode...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation>Scribus frontend for Pure PostScript Barcode Writer</translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<source>Error opening file: %1</source>
<translation>Error opening file: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation>12 or 13 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation>8 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation>11 or 12 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation>7 or 8 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation>5 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation>2 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>Variable number of characters, digits and any of the symbols -. *$/+%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>Variable number of digits and any of the symbols -$:/.+ABCD.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation>Variable number of digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation>Variable number of digits and capital letters</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation>Variable number of hexadecimal characters</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
<source>Barcode incomplete</source>
<translation>Barcode incomplete</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
<source>Select Type</source>
<translation>Select Type</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
<source>Select Barcode Type</source>
<translation>Select Barcode Type</translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode Creator</source>
<translation type="obsolete">Barcode Creator</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode</source>
<translation type="obsolete">Barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="140"/>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
<source>Select one of the available barcode type here</source>
<translation>Select one of the available barcode type here</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>The numeric representation of the code itself. See the help message below</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
<source>Reset the barcode samples</source>
<translation>Reset the barcode samples</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">&amp;Include text in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation>If checked, there will be numbers in the barcode too</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
<source>&amp;Guard whitespace</source>
<translation type="obsolete">&amp;Guard whitespace</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
<source>Draw arrows to be sure of space next the code</source>
<translation>Draw arrows to be sure of space next the code</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
<source>Colors</source>
<translation>Colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="184"/>
<source>&amp;Background</source>
<translation>&amp;Background</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
<source>Background color - under the code lines</source>
<translation>Background colour - under the code lines</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
<source>&amp;Lines</source>
<translation>&amp;Lines</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
<source>Color of the lines in barcode</source>
<translation>Colour of the lines in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
<source>&amp;Text</source>
<translation>&amp;Text</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
<source>Color of the text and numbers</source>
<translation>Colour of the text and numbers</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
<source>Hints and help is shown here</source>
<translation>Hints and help is shown here</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
<source>Preview of the result. 72dpi sample.</source>
<translation>Preview of the result. 72dpi sample.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="120"/>
<source>Co&amp;de:</source>
<translation>Co&amp;de:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">I&amp;nclude checksum</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
<source>Generate and include a checksum in barcode</source>
<translation>Generate and include a checksum in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">Incl&amp;ude checksum digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
<source>Include the checksum digit in the barcode text</source>
<translation>Include the checksum digit in the barcode text</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<source>Insert Barcode</source>
<translation>Insert Barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
<source>Incl&amp;ude Checksum Digit</source>
<translation>Incl&amp;ude Checksum Digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
<source>I&amp;nclude Checksum</source>
<translation>I&amp;nclude Checksum</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="65"/>
<source>&amp;Guard Whitespace</source>
<translation>&amp;Guard Whitespace</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
<source>&amp;Include Text in Barcode</source>
<translation>&amp;Include Text in Barcode</translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<source>Scrapbook</source>
<translation>Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
<source>Delete</source>
<translation>Delete</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<source>Object</source>
<translation>Object</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>New Entry</source>
<translation>New Entry</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
<source>Rename</source>
<translation>Rename</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>Name &quot;%1&quot; is not unique.
Please choose another.</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation>Choose a Scrapbook Directory</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation>Choose a Directory</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation>Choose a scrapbook file to import</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
<source>Create a new scrapbook page</source>
<translation>Create a new scrapbook page</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
<source>Load an existing scrapbook</source>
<translation>Load an existing scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
<source>Save the selected scrapbook</source>
<translation>Save the selected scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Import an scrapbook file from Scribus &lt;=1.3.2</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
<source>Close the selected scrapbook</source>
<translation>Close the selected scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation>Copy To:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation>Move To:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation>Main</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation>Copied Items</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
<source>New Name</source>
<translation>New Name</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>Scrapbook (*.scs *.SCS)</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
<source>Paste to Page</source>
<translation>Paste to Page</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
<source>Save as...</source>
<translation>Save as...</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
<source>Close</source>
<translation>Close</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
<source>Delete Contents</source>
<translation>Delete Contents</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
<source>Do you really want to delete all entries?</source>
<translation>Do you really want to delete all entries?</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
<source>Bookmarks</source>
<translation>Bookmarks</translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<location filename="../../scribus/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>Icon Placement</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>Layout:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>Caption only</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Icon only</source>
<translation>Icon only</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>Caption below Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>Caption above Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>Caption right to Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>Caption left to Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>Caption overlays Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>Scale:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>Always</source>
<translation>Always</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>When Icon is too big</source>
<translation>When Icon is too big</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>Never</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>Scale How:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="66"/>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="67"/>
<source>Non Proportional</source>
<translation>Non Proportional</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="90"/>
<source>Icon</source>
<translation>Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="117"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="121"/>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="124"/>
<source>Reset</source>
<translation>Reset</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>When Icon is too small</source>
<translation>When Icon is too small</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="34"/>
<source>System Profiles</source>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="89"/>
<source>Rendering Intents</source>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<source>Perceptual</source>
<translation>Perceptual</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<source>Relative Colorimetric</source>
<translation>Relative Colourimetric</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<source>Saturation</source>
<translation>Saturation</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<source>Absolute Colorimetric</source>
<translation>Absolute Colourimetric</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="143"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="144"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="150"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="obsolete">Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="147"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="149"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="obsolete">Method of showing colours on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="31"/>
<source>&amp;Activate Color Management</source>
<translation type="obsolete">&amp;Activate Colour Management</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="75"/>
<source>&amp;Monitor:</source>
<translation type="obsolete">&amp;Monitor:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="83"/>
<source>P&amp;rinter:</source>
<translation type="obsolete">P&amp;rinter:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="113"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="130"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="obsolete">Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="134"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="obsolete">Use &amp;Blackpoint Compensation</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">&amp;RGB Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">&amp;CMYK Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="139"/>
<source>Default color profile for imported CMYK images</source>
<translation type="obsolete">Default colour profile for imported CMYK images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="140"/>
<source>Default color profile for imported RGB images</source>
<translation type="obsolete">Default colour profile for imported RGB images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="59"/>
<source>&amp;RGB Solid Colors:</source>
<translation type="obsolete">&amp;RGB Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="67"/>
<source>&amp;CMYK Solid Colors:</source>
<translation type="obsolete">&amp;CMYK Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>Pictures:</source>
<translation type="obsolete">Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="106"/>
<source>Sol&amp;id Colors:</source>
<translation type="obsolete">Sol&amp;id Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="121"/>
<source>Convert all colors to printer space</source>
<translation type="obsolete">Convert all colours to printer space</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="141"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="obsolete">Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="142"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="obsolete">Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="145"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for solid colours. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="146"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for images. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="148"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="obsolete">Simulate a full colour managed environment :
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="98"/>
<source>Images:</source>
<translation type="obsolete">Images:</translation>
</message>
</context>
<context>
<name>CMSPrefsBase</name>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="19"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="40"/>
<source>&amp;Activate Color Management</source>
<translation>&amp;Activate Colour Management</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="50"/>
<source>System Profiles</source>
<translation>System Profiles</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="74"/>
<source>&amp;RGB Images:</source>
<translation>&amp;RGB Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="90"/>
<source>Default color profile for imported RGB images</source>
<translation>Default colour profile for imported RGB images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="97"/>
<source>&amp;CMYK Images:</source>
<translation>&amp;CMYK Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="113"/>
<source>Default color profile for imported CMYK images</source>
<translation>Default colour profile for imported CMYK images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="120"/>
<source>&amp;RGB Solid Colors:</source>
<translation>&amp;RGB Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="136"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation>Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="143"/>
<source>&amp;CMYK Solid Colors:</source>
<translation>&amp;CMYK Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="159"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="166"/>
<source>&amp;Monitor:</source>
<translation>&amp;Monitor:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="182"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="190"/>
<source>P&amp;rinter:</source>
<translation>P&amp;rinter:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="206"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="220"/>
<source>Rendering Intents</source>
<translation>Rendering Intents</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="244"/>
<source>Images:</source>
<translation>Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="260"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for images. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="268"/>
<source>Sol&amp;id Colors:</source>
<translation>Sol&amp;id Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="284"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for solid colours. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="298"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation>Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="302"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="329"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation>Simulate a full colour managed environment :
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="333"/>
<source>Convert all colors to printer space</source>
<translation>Convert all colours to printer space</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="340"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>Method of showing colours on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="344"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="357"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="361"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation>Use &amp;Blackpoint Compensation</translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../scribus/cmykfw.cpp" line="92"/>
<source>Edit Color</source>
<translation>Edit Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="906"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="911"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="764"/>
<source>Web Safe RGB</source>
<translation>Web Safe RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="141"/>
<source>New</source>
<translation>New</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="158"/>
<source>Old</source>
<translation>Old</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="705"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="706"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="707"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="347"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="444"/>
<source>Dynamic Color Bars</source>
<translation>Dynamic Colour Bars</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="442"/>
<source>Static Color Bars</source>
<translation>Static Colour Bars</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="749"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="750"/>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="751"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="704"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="195"/>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-Colourmap</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="101"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="111"/>
<source>Color &amp;Model</source>
<translation>Colour &amp;Model</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="125"/>
<source>Is Spot Color</source>
<translation>Is Spot Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Is Registration Color</source>
<translation type="obsolete">Is Registration Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1002"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>You cannot create a colour named &quot;%1&quot;.
It is a reserved name for transparent colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
<translation type="obsolete">Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1011"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation>The name of the colour already exists,
please choose another one.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation>Choosing this will make this colour a spot colour, thus creating another spot when creating plates or separations. This is used most often when a logo or other colour needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="785"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Colour Management.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="995"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>You cannot create a colour without a namePlease give it a name</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="196"/>
<source>HSV Color Map</source>
<translation>HSV Colour Map</translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation>Merging colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation>Error: </translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation>Colour %1 exists already!</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<source>Color %1 appended.</source>
<translation>Colour %1 appended.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<source>Now opening the color manager.</source>
<translation>Now opening the colour manager.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<source>Color Merging</source>
<translation>Colour Merging</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>Unable to find the requested colour. You have probably selected black, grey or white. There is no way to process this colour.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<source>Color Wheel</source>
<translation>Colour Wheel</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>Click the wheel to get the base colour. Its colour model depends on the ch