Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 12410 → Rev 12411

/trunk/Scribus/translations/qm/scribus.ja.qm
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
/trunk/Scribus/translations/po/scribus.ja.ts
1,26 → 1,21
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1">
<context>
<!DOCTYPE TS>
<TS>
<context>
<name>@default</name>
</context>
<context>
<name>@default</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
<source>getColor(&quot;name&quot;) -> tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
<source>getColorAsRGB(&quot;name&quot;) -> tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
27,27 → 22,25
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
56,27 → 49,25
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise NotFoundError if a named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise NotFoundError if a named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
95,10 → 86,10
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
result = messageBox('Script failed',
'This script only works when you have a text frame selected.',
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
result = messageBox('Monkeys!', 'Something went ook! &lt;i>Was it a monkey?&lt;/i>',
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
107,32 → 98,29
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
<source>valueDialog(caption, message [,defaultvalue]) -> string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
Shows the common 'Ask for string' dialog and returns its value as a string
Parameters: window title, text in the window and optional 'default' value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
Example: valueDialog('title', 'text in the window', 'optional')
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
<source>newStyleDialog() -> string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
Shows 'Create new paragraph style' dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -> bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
140,7 → 128,7
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
use predefined constants named PAPER_&lt;paper_type> e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
148,8 → 136,8
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
pagenumbering. While you'll usually want 1, it's useful to have higher
numbers if you're creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
166,39 → 154,35
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
<source>haveDoc() -> bool
 
Returns true if there is a document open.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
206,11 → 190,10
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
217,41 → 200,37
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
defined as constants UNIT_&lt;type>.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
<source>getUnit() -> integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
258,207 → 237,186
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
<source>getLineColor([&quot;name&quot;]) -> string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
<source>getLineWidth([&quot;name&quot;]) -> integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
<source>getLineShade([&quot;name&quot;]) -> integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
<source>getLineEnd([&quot;name&quot;]) -> integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
<source>getLineStyle([&quot;name&quot;]) -> integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
<source>getFillShade([&quot;name&quot;]) -> integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
<source>getImageScale([&quot;name&quot;]) -> (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
<source>getImageName([&quot;name&quot;]) -> string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
<source>getSize([&quot;name&quot;]) -> (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
expressed in the current measurement unit of the document - see UNIT_&lt;type>
for reference.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
<source>getRotation([&quot;name&quot;]) -> integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
<source>getAllObjects() -> list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
Returns the name of the C type of `property' of `object'. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
If `includesuper' is true, search inherited properties too.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
Return a list of property names supported by `object'.
If `includesuper' is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
Return the value of the property `property' of the passed `object'.
 
The `object&apos; argument may be a string, in which case the named PageItem
The `object' argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
The `property' argument must be a string, and is the name of the property
to look up on `object'.
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
Set `property' of `object' to `value'. If `value' cannot be converted to a type
compatible with the type of `property', an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
465,71 → 423,63
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
<source>getSelectedObject([nr]) -> string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
<source>selectionCount() -> integer
 
Returns the number of selected objects.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
539,11 → 489,10
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
550,11 → 499,10
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
562,59 → 510,53
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
<source>lockObject([&quot;name&quot;]) -> bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
Locks the object &quot;name&quot; if it's unlocked or unlock it if it's locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
<source>isLocked([&quot;name&quot;]) -> bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection>)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
Sets the scale to frame on the selected or specified image frame to `scaletoframe'.
If `proportional' is specified, set fixed aspect ratio scaling to `proportional'.
Both `scaletoframe' and `proportional' are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
<source>getFontNames() -> list
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
<source>getXFontNames() -> list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
Returns a larger font info. It's a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -> bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
622,108 → 564,98
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise NotFoundError if the specified font can't be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
<source>getLayers() -> list
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
<source>getActiveLayer() -> string
 
Returns the name of the current active layer.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
<source>isLayerPrintable(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn't
exists or if it's the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
<source>getGuiLanguage() -> string
 
Returns a string with the -lang value.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
731,13 → 663,12
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
<source>createImage(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
745,13 → 676,12
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
<source>createText(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
759,13 → 689,12
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -> string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
773,13 → 702,12
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
<source>createPolyLine(list, [&quot;name&quot;]) -> string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
788,15 → 716,14
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
<source>createPolygon(list, [&quot;name&quot;]) -> string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
807,15 → 734,14
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
<source>createBezierLine(list, [&quot;name&quot;]) -> string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
827,15 → 753,14
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -> string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
843,77 → 768,69
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
May raise NameExistsError if you explicitly pass a name that's already used.
May raise NotFoundError if one or both of the named base object don't exist.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
<source>objectExists([&quot;name&quot;]) -> bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
given, it's applied on the selected object.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
<source>getAllStyles() -> list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
<source>currentPage() -> integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
921,104 → 838,93
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
<source>pageCount() -> integer
 
Returns the number of pages in the document.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
<source>getHGuides() -> list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
document's current units - see UNIT_&lt;type> constants.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
measured in the current document units - see UNIT_&lt;type> constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
<source>getPageSize() -> tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
Returns a tuple with page dimensions measured in the document's current units.
See UNIT_&lt;type> constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
<source>getPageItems() -> list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
(name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)]
means that object named 'Text1' is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
units. See UNIT_&lt;type> constants and getPageSize().
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
1026,11 → 932,10
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
<source>setLineShade(shade, [&quot;name&quot;])
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
1039,41 → 944,37
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineJoin(join, [&quot;name&quot;])
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
predefined constants for join - JOIN_&lt;type>.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
predefined constants for &quot;cap&quot; - CAP_&lt;type>.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineStyle(style, [&quot;name&quot;])
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
constants for &quot;style&quot; - LINE_&lt;style>.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
<source>setFillShade(shade, [&quot;name&quot;])
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
1082,11 → 983,10
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
1093,22 → 993,20
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
May raise NotFoundError if the line style doesn't exist.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
<source>getFont([&quot;name&quot;]) -> string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
1115,20 → 1013,18
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
<source>getTextLength([&quot;name&quot;]) -> integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
<source>getText([&quot;name&quot;]) -> string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
1135,11 → 1031,10
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
<source>getAllText([&quot;name&quot;]) -> string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
1146,49 → 1041,44
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
<source>getLineSpacing([&quot;name&quot;]) -> float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="99"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
<source>getColumnGap([&quot;name&quot;]) -> float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="109"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
<source>getColumns([&quot;name&quot;]) -> integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="121"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="148"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
1196,11 → 1086,10
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="162"/>
<source>setFontSize(size, [&quot;name&quot;])
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
1207,13 → 1096,12
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
May throw ValueError for a font size that's out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="175"/>
<source>setLineSpacing(size, [&quot;name&quot;])
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
1221,11 → 1109,10
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="187"/>
<source>setColumnGap(size, [&quot;name&quot;])
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
1232,11 → 1119,10
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setColumns(nr, [&quot;name&quot;])
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1243,11 → 1129,10
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="212"/>
<source>setTextAlignment(align, [&quot;name&quot;])
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
1255,11 → 1140,10
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="226"/>
<source>selectText(start, count, [&quot;name&quot;])
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
1268,40 → 1152,36
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="237"/>
<source>deleteText([&quot;name&quot;])
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="248"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="258"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="271"/>
<source>setTextShade(shade, [&quot;name&quot;])
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
1309,11 → 1189,10
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="284"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
1321,43 → 1200,39
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="301"/>
<source>unlinkTextFrames(&quot;name&quot;)
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)'
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="314"/>
<source>traceText([&quot;name&quot;])
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="328"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
<source>textOverflows([&quot;name&quot;, nolinks]) -> integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
If is nolinks set to non zero value it takes only one frame - it doesn't
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="382"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
<source>isPDFBookmark([&quot;name&quot;]) -> bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
1364,29 → 1239,26
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
Sets the progress bar's maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
1394,148 → 1266,134
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
progressReset(). [based on info taken from Trolltech's Qt docs]
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
Enable/disable save icon in the Scribus icon bar and the Save menu item. It's
useful to call this procedure when you're changing the document, because Scribus
won't automatically notice when you change the document using a script.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
<source>getFillTransparency([&quot;name&quot;]) -> float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
<source>getFillBlendmode([&quot;name&quot;]) -> integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
<source>getLineTransparency([&quot;name&quot;]) -> float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
<source>getLineBlendmode([&quot;name&quot;]) -> integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
<source>isLayerLocked(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
<source>isLayerOutlined(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
<source>isLayerFlow(&quot;layer&quot;) -> bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
<source>getLayerBlendmode(&quot;layer&quot;) -> int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
<source>getLayerTransparency(&quot;layer&quot;) -> float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
1545,45 → 1403,40
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
<source>duplicateObject([&quot;name&quot;]) -> string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -> bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
<source>getPageType() -> integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
<source>getTextLines([&quot;name&quot;]) -> integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
1591,67 → 1444,61
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
<source>getCornerRadius([&quot;name&quot;]) -> integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
<source>getPosition([&quot;name&quot;]) -> (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
- see UNIT_&lt;type> for reference.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
printable set to false the layer won't be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
<source>isLayerVisible(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="135"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
1660,108 → 1507,93
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../plugins/fileloader/scribus12format/scribus12format.cpp" line="1593"/>
<source>Copy #%1 of </source>
<translation type="obsolete">#%1のコピー</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
margins are given in the measurement units of the document - see UNIT_&lt;type>
constants.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
1768,11 → 1600,10
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
1779,11 → 1610,10
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
1790,15 → 1620,14
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -> string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
supplied, leave this string empty when you don't want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
1805,29 → 1634,27
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
The filter, if specified, takes the form 'comment (*.type *.type2 ...)'.
For example 'Images (*.png *.xpm *.jpg)'.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
Example: fileDialog('Open input', 'CSV files (*.csv)')
Example: fileDialog('Save report', defaultname='report.txt', issave=True)
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
<source>getLineJoin([&quot;name&quot;]) -> integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
1835,23 → 1662,21
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
gotoPage doesn't (currently) change the page the user's view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="370"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
1858,29 → 1683,26
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page->Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
1887,72 → 1709,70
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
&quot;name&quot; [required] -> name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
&quot;font&quot; [optional] -> name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
fontsize [optional] -> font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
&quot;features&quot; [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
-> inherit
 
-&gt; bold
-> bold
 
-&gt; italic
-> italic
 
-&gt; underline
-> underline
 
-&gt; underlinewords
-> underlinewords
 
-&gt; strike
-> strike
 
-&gt; superscript
-> superscript
 
-&gt; subscript
-> subscript
 
-&gt; outline
-> outline
 
-&gt; shadowed
-> shadowed
 
-&gt; allcaps
-> allcaps
 
-&gt; smallcaps
-> smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -> specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -> specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
baselineoffset [optional] -> offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
outlinewidth [optional] -> width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
underlineoffset [optional], underlinewidth [optional] -> underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
scaleh [optional], scalev [optional] -> scale of the chars
 
tracking [optional] -&gt; tracking of the text
tracking [optional] -> tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
&quot;language&quot; [optional] -> language code
 
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="341"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
<source>hyphenateText([&quot;name&quot;]) -> bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1959,11 → 1779,10
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="355"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
<source>dehyphenateText([&quot;name&quot;]) -> bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1970,45 → 1789,41
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
<source>getColorNames() -> list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
<source>newDocDialog() -> bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -> bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
use predefined constants named PAPER_&lt;paper_type> e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
2016,8 → 1831,8
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
pagenumbering. While you'll usually want 1, it's useful to have higher
numbers if you're creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
2041,20 → 1856,18
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
<source>getFillColor([&quot;name&quot;]) -> string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
2061,21 → 1874,19
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
<source>createRect(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
2083,13 → 1894,12
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
2099,27 → 1909,25
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
available types (FILL_&lt;type>).
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
&quot;name&quot; [required] -> specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
linespacingmode [optional] -> specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
2127,40 → 1935,39
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
linespacing [optional] -> specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
alignment [optional] -> specifies the alignment of the paragraph
 
-&gt; left: 0
-> left: 0
 
-&gt; center: 1
-> center: 1
 
-&gt; right: 2
-> right: 2
 
-&gt; justify: 3
-> justify: 3
 
-&gt; extend: 4
-> extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
leftmargin [optional], rightmargin [optional] -> specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
firstindent [optional] -> the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
dropcaplines [optional] -> height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
dropcapoffset [optional] -> offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
&quot;charstyle&quot; [optional] -> char style to use
 
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
<source>getFontSize([&quot;name&quot;]) -> float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
2167,20 → 1974,18
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
must be UTF8 encoded or 'unicode' string(recommended).
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
2187,19378 → 1992,12512
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>AIPlug</name>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="123"/>
<source>Importing: %1</source>
<translation type="unfinished"></translation>
<source>Importing: %1</source>
<translation>インポート中: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="126"/>
<source>Analyzing File:</source>
<translation type="unfinished"></translation>
<source>Analyzing File:</source>
<translation>ファイルを解析:</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="287"/>
<source>Group%1</source>
<translation type="unfinished"></translation>
<source>Group%1</source>
<translation>グループ%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2249"/>
<source>Generating Items</source>
<translation type="unfinished"></translation>
<source>Generating Items</source>
<translation>アイテムを生成</translation>
</message>
</context>
<context>
</context>
<context>
<name>About</name>
<message>
<location filename="../../scribus/about.cpp" line="53"/>
<source>About Scribus %1</source>
<translation>Scribusについて %1</translation>
<source>About Scribus %1</source>
<translation>Scribusについて %1</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>January</source>
<translation type="obsolete">January</translation>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="80"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="88"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
<source>Using Ghostscript version %1</source>
<translation>Ghostscriptバージョン %1 を使用</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="138"/>
<source>Using Ghostscript version %1</source>
<translation>Ghostscriptバージョン %1 を使用</translation>
<source>No Ghostscript version available</source>
<translation>利用可能なGhostscriptのバージョンはありません</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="140"/>
<source>No Ghostscript version available</source>
<translation>利用可能なGhostscriptのバージョンはありません</translation>
<source>Build ID:</source>
<translation>ビルドID:</translation>
</message>
<message>
<location filename="../about.cpp" line="132"/>
<source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
<translation type="obsolete">&lt;b&gt;Scribusバージョン %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</translation>
<source>&amp;About</source>
<translation>バージョン情報(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="141"/>
<source>Build ID:</source>
<translation>ビルドID:</translation>
<source>Development Team:</source>
<translation>開発チーム:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="143"/>
<source>&amp;About</source>
<translation>バージョン情報(&amp;A)</translation>
<source>Contributions from:</source>
<translation>貢献者:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="149"/>
<source>Development Team:</source>
<translation>開発チーム:</translation>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua 移植:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="163"/>
<source>Contributions from:</source>
<translation>貢献者:</translation>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; 移植:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="183"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua 移植:</translation>
<source>Official Documentation:</source>
<translation>オフィシャルなドキュメント担当者:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="191"/>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; 移植:</translation>
<source>Other Documentation:</source>
<translation>その他のドキュメント担当者:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="195"/>
<source>Official Documentation:</source>
<translation>オフィシャルなドキュメント担当者:</translation>
<source>A&amp;uthors</source>
<translation>作者(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="203"/>
<source>Other Documentation:</source>
<translation>その他のドキュメント担当者:</translation>
<source>Official Translations and Translators:</source>
<translation>オフィシャルな翻訳並びに翻訳者:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="217"/>
<source>A&amp;uthors</source>
<translation>作者(&amp;U)</translation>
<source>Previous Translation Contributors:</source>
<translation>以前の翻訳の貢献者:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="225"/>
<source>Official Translations and Translators:</source>
<translation>オフィシャルな翻訳並びに翻訳者:</translation>
<source>&amp;Translations</source>
<translation>翻訳(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="357"/>
<source>Previous Translation Contributors:</source>
<translation>以前の翻訳の貢献者:</translation>
<source>Homepage</source>
<translation>ホームページ</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="400"/>
<source>&amp;Translations</source>
<translation>翻訳(&amp;T)</translation>
<source>Online Reference</source>
<translation>オンラインリファレンス</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="406"/>
<source>Homepage</source>
<translation>ホームページ</translation>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="408"/>
<source>Online Reference</source>
<translation>オンラインリファレンス</translation>
<source>Bugs and Feature Requests</source>
<translation>バグや機能の要望</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="410"/>
<source>Wiki</source>
<translation>Wiki</translation>
<source>Mailing List</source>
<translation>メーリングリスト</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="412"/>
<source>Bugs and Feature Requests</source>
<translation>バグや機能の要望</translation>
<source>&amp;Online</source>
<translation>オンライン(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="416"/>
<source>Mailing List</source>
<translation>メーリングリスト</translation>
<source>&amp;Close</source>
<translation>閉じる(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="423"/>
<source>&amp;Online</source>
<translation>オンライン(&amp;O)</translation>
<source>Tango Project Icons:</source>
<translation>Tangoプロジェクトアイコン:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="462"/>
<source>&amp;Close</source>
<translation>閉じる(&amp;C)</translation>
<source>&amp;Updates</source>
<translation>アップデート(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="211"/>
<source>Tango Project Icons:</source>
<translation type="unfinished"></translation>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Scribusのアップデートをチェックします。あなたのコンピュータのデータを外部に送信することはありません。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="426"/>
<source>&amp;Updates</source>
<translation type="unfinished"></translation>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; 移植:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="475"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation type="unfinished"></translation>
<source>Splash Screen:</source>
<translation>スプラッシュスクリーン</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="187"/>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation type="unfinished"></translation>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>このパネルではバージョン、ビルド日時、Scribusでサポートされているコンパイル済みライブラリを表示します。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="208"/>
<source>Splash Screen:</source>
<translation type="unfinished"></translation>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>C-C-T-Fは、C=littlecms C=CUPS T=TIFFサポート F=Fontconfigサポートを意味します。最後の文字はレンダラを意味し、C=cairo or Q=Qtです。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="471"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation type="unfinished"></translation>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>ライブラリのサポートがない場合は * で示されます。これはScribusが検知したGhostscriptのバージョンも示しています。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="472"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation type="unfinished"></translation>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>WindowsバージョンではfontconfigやCUPSライブラリは使用されません。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="473"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation type="unfinished"></translation>
<source>&lt;p align=&quot;center&quot;>&lt;b>%1 %2&lt;/b>&lt;/p>&lt;p align=&quot;center&quot;>%3&lt;br>%4 %5&lt;br>%6&lt;/p></source>
<translation>&lt;p align=&quot;center&quot;>&lt;b>%1 %2&lt;/b>&lt;/p>&lt;p align=&quot;center&quot;>%3&lt;br>%4 %5&lt;br>%6&lt;/p></translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="474"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation type="unfinished"></translation>
<source>Scribus Version</source>
<translation>Scribusバージョン</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="141"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation type="unfinished"></translation>
<source>Check for Updates</source>
<translation>アップデートをチェック</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="141"/>
<source>Scribus Version</source>
<translation type="unfinished">Scribusバージョン</translation>
<source>Abort Update Check</source>
<translation>アップデートのチェックを中断</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="506"/>
<source>Check for Updates</source>
<translation type="unfinished"></translation>
<source>Developer Blog</source>
<translation>開発者Blog</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="504"/>
<source>Abort Update Check</source>
<translation type="unfinished"></translation>
<source>&amp;Licence</source>
<translation>ライセンス(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="414"/>
<source>Developer Blog</source>
<translation type="unfinished"></translation>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>ライセンスファイルを開けません。インストールしたディレクトリかScribusのウェブサイトでライセンス情報をチェックしてください。</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="437"/>
<source>&amp;Licence</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="446"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>AboutPlugins</name>
<message>
<location filename="" line="136965632"/>
<source>Yes</source>
<translation type="obsolete">はい</translation>
<source>Filename:</source>
<translation>ファイル名:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>No</source>
<translation type="obsolete">いいえ</translation>
<source>Version:</source>
<translation>バージョン:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation type="unfinished"></translation>
<source>Enabled:</source>
<translation>有効:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation type="unfinished">バージョン:</translation>
<source>Release Date:</source>
<translation>リリース日時:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation type="unfinished">有効:</translation>
<source>Description:</source>
<translation>詳細:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation type="unfinished">リリース日時:</translation>
<source>Author(s):</source>
<translation>作者:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation type="unfinished">詳細:</translation>
<source>Copyright:</source>
<translation>著作権:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation type="unfinished">作者:</translation>
<source>License:</source>
<translation>ライセンス:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation type="unfinished">著作権:</translation>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: プラグインについて</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation type="unfinished">ライセンス:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation type="unfinished">Scribus: プラグインについて</translation>
</message>
</context>
<context>
<name>AboutPluginsBase</name>
<message>
<location filename="" line="136965632"/>
<source>Scribus: About Plug-ins</source>
<translation type="obsolete">Scribus: プラグインについて</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>File Name:</source>
<translation type="obsolete">ファイル名:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Version:</source>
<translation type="obsolete">バージョン:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Enabled:</source>
<translation type="obsolete">有効:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Release Date:</source>
<translation type="obsolete">リリース日時:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Copyright:</source>
<translation type="obsolete">著作権:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Author(s):</source>
<translation type="obsolete">作者:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Description:</source>
<translation type="obsolete">詳細:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>License:</source>
<translation type="obsolete">ライセンス:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Close</source>
<translation type="obsolete">閉じる(&amp;C)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
</context>
<context>
</context>
<context>
<name>ActionManager</name>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1233"/>
<source>&amp;New</source>
<translation>新規(&amp;N)</translation>
<source>&amp;New</source>
<translation>新規(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1234"/>
<source>&amp;Open...</source>
<translation>開く(&amp;O)...</translation>
<source>&amp;Open...</source>
<translation>開く(&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1235"/>
<source>&amp;Close</source>
<translation>閉じる(&amp;C)</translation>
<source>&amp;Close</source>
<translation>閉じる(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1236"/>
<source>&amp;Save</source>
<translation>保存(&amp;S)</translation>
<source>&amp;Save</source>
<translation>保存(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1237"/>
<source>Save &amp;As...</source>
<translation>名前を付けて保存(&amp;A)...</translation>
<source>Save &amp;As...</source>
<translation>名前を付けて保存(&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1238"/>
<source>Re&amp;vert to Saved</source>
<translation>保存した状態に戻す(&amp;V)</translation>
<source>Re&amp;vert to Saved</source>
<translation>保存した状態に戻す(&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1239"/>
<source>Collect for O&amp;utput...</source>
<translation>まとめて出力(&amp;U)...</translation>
<source>Collect for O&amp;utput...</source>
<translation>まとめて出力(&amp;U)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1240"/>
<source>Get Text...</source>
<translation>テキストを取得...</translation>
<source>Get Text...</source>
<translation>テキストを取得...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1241"/>
<source>Append &amp;Text...</source>
<translation>テキストを追加(&amp;T)...</translation>
<source>Append &amp;Text...</source>
<translation>テキストを追加(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1242"/>
<source>Get Image...</source>
<translation>画像を取得...</translation>
<source>Get Image...</source>
<translation>画像を取得...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1245"/>
<source>Save &amp;Text...</source>
<translation>テキストを保存(&amp;T)...</translation>
<source>Save &amp;Text...</source>
<translation>テキストを保存(&amp;T)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Save Page as &amp;EPS...</source>
<translation type="obsolete">EPS形式でページを保存(&amp;E)...</translation>
<source>Save as P&amp;DF...</source>
<translation>PDF形式で保存(&amp;D)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1247"/>
<source>Save as P&amp;DF...</source>
<translation>PDF形式で保存(&amp;D)...</translation>
<source>Document &amp;Setup...</source>
<translation>ドキュメント設定(&amp;S)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1248"/>
<source>Document &amp;Setup...</source>
<translation>ドキュメント設定(&amp;S)...</translation>
<source>&amp;Print...</source>
<translation>印刷(&amp;P)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1250"/>
<source>&amp;Print...</source>
<translation>印刷(&amp;P)...</translation>
<source>Print Previe&amp;w</source>
<translation>印刷プレビュー(&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1251"/>
<source>Print Previe&amp;w</source>
<translation>印刷プレビュー(&amp;W)</translation>
<source>&amp;Quit</source>
<translation>終了(&amp;Q)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1252"/>
<source>&amp;Quit</source>
<translation>終了(&amp;Q)</translation>
<source>&amp;Undo</source>
<translation>元に戻す(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1254"/>
<source>&amp;Undo</source>
<translation>元に戻す(&amp;U)</translation>
<source>&amp;Redo</source>
<translation>やり直し(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1255"/>
<source>&amp;Redo</source>
<translation>やり直し(&amp;R)</translation>
<source>&amp;Item Action Mode</source>
<translation>アイテムアクションモード(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1256"/>
<source>&amp;Item Action Mode</source>
<translation>アイテムアクションモード(&amp;I)</translation>
<source>Cu&amp;t</source>
<translation>切り取り(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<source>Cu&amp;t</source>
<translation>切り取り(&amp;T)</translation>
<source>&amp;Copy</source>
<translation>コピー(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<source>&amp;Copy</source>
<translation>コピー(&amp;C)</translation>
<source>&amp;Paste</source>
<translation>貼り付け(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<source>&amp;Paste</source>
<translation>貼り付け(&amp;P)</translation>
<source>Select &amp;All</source>
<translation>全て選択(&amp;A)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>C&amp;lear Contents</source>
<translation type="obsolete">内容をクリア(&amp;L)</translation>
<source>&amp;Deselect All</source>
<translation>全てを選択解除(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<source>Select &amp;All</source>
<translation>全て選択(&amp;A)</translation>
<source>&amp;Search/Replace...</source>
<translation>検索/置換(&amp;S)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<source>&amp;Deselect All</source>
<translation>全てを選択解除(&amp;D)</translation>
<source>Edit Image...</source>
<translation>画像を編集...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1267"/>
<source>&amp;Search/Replace...</source>
<translation>検索/置換(&amp;S)...</translation>
<source>C&amp;olors...</source>
<translation>色(&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
<source>Edit Image...</source>
<translation>画像を編集...</translation>
<source>&amp;Master Pages...</source>
<translation>マスターページ(&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<source>C&amp;olors...</source>
<translation>色(&amp;O)...</translation>
<source>&amp;JavaScripts...</source>
<translation>Javascript(&amp;J)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Paragraph Styles...</source>
<translation type="obsolete">段落スタイル(&amp;P)...</translation>
<source>P&amp;references...</source>
<translation>設定(&amp;R)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Line Styles...</source>
<translation type="obsolete">線スタイル(&amp;L)...</translation>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>&amp;Master Pages...</source>
<translation>マスターページ(&amp;M)...</translation>
<source>&amp;Other...</source>
<translation>その他(&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<source>&amp;JavaScripts...</source>
<translation>Javascript(&amp;J)...</translation>
<source>&amp;Left</source>
<translation>左(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1249"/>
<source>P&amp;references...</source>
<translation>設定(&amp;R)...</translation>
<source>&amp;Center</source>
<translation>中央(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<source>%1 pt</source>
<translation>%1 pt</translation>
<source>&amp;Right</source>
<translation>右(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<source>&amp;Other...</source>
<translation>その他(&amp;O)...</translation>
<source>&amp;Block</source>
<translation>ブロック(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1285"/>
<source>&amp;Left</source>
<translation>左(&amp;L)</translation>
<source>&amp;Forced</source>
<translation>強制(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1286"/>
<source>&amp;Center</source>
<translation>中央(&amp;C)</translation>
<source>&amp;%1 %</source>
<translation>&amp;%1 %</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>&amp;Right</source>
<translation>右(&amp;R)</translation>
<source>&amp;Normal</source>
<translation>標準(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>&amp;Block</source>
<translation>ブロック(&amp;B)</translation>
<source>&amp;Underline</source>
<translation>下線(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<source>&amp;Forced</source>
<translation>強制(&amp;F)</translation>
<source>Underline &amp;Words</source>
<translation>単語に下線を引く</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>&amp;%1 %</source>
<translation>&amp;%1 %</translation>
<source>&amp;Strike Through</source>
<translation>取り消し線(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>&amp;Normal</source>
<translation>標準(&amp;N)</translation>
<source>&amp;All Caps</source>
<translation>全て大文字(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
<source>&amp;Underline</source>
<translation>下線(&amp;U)</translation>
<source>Small &amp;Caps</source>
<translation>スモールキャピタル(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1300"/>
<source>Underline &amp;Words</source>
<translation>ワードに下線を引く</translation>
<source>Su&amp;perscript</source>
<translation>上付き文字(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1301"/>
<source>&amp;Strike Through</source>
<translation>取り消し線(&amp;S)</translation>
<source>Su&amp;bscript</source>
<translation>下付き文字(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1302"/>
<source>&amp;All Caps</source>
<translation type="unfinished"></translation>
<source>S&amp;hadow</source>
<translation>影(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1303"/>
<source>Small &amp;Caps</source>
<translation>スモールキャピタル(&amp;C)</translation>
<source>&amp;Image Effects</source>
<translation>画像のエフェクト(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1304"/>
<source>Su&amp;perscript</source>
<translation>上付き文字(&amp;P)</translation>
<source>&amp;Tabulators...</source>
<translation>タブ(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1305"/>
<source>Su&amp;bscript</source>
<translation>下付き文字(&amp;B)</translation>
<source>D&amp;uplicate</source>
<translation>複製(&amp;U)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Outline</source>
<translation type="obsolete">アウトライン(&amp;O)</translation>
<source>&amp;Multiple Duplicate</source>
<translation>複数コピー(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1307"/>
<source>S&amp;hadow</source>
<translation>影(&amp;H)</translation>
<source>&amp;Delete</source>
<translation>削除(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1309"/>
<source>&amp;Image Effects</source>
<translation>画像のエフェクト(&amp;I)</translation>
<source>&amp;Group</source>
<translation>グループ化(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1310"/>
<source>&amp;Tabulators...</source>
<translation>タブ(&amp;T)...</translation>
<source>&amp;Ungroup</source>
<translation>グループ解除(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1313"/>
<source>D&amp;uplicate</source>
<translation>複製(&amp;U)</translation>
<source>Is &amp;Locked</source>
<translation>ロック(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<source>&amp;Multiple Duplicate</source>
<translation>複数コピー(&amp;M)</translation>
<source>Si&amp;ze is Locked</source>
<translation>サイズをロック(&amp;Z)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1315"/>
<source>&amp;Delete</source>
<translation>削除(&amp;D)</translation>
<source>Lower to &amp;Bottom</source>
<translation>最背面に移動(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1316"/>
<source>&amp;Group</source>
<translation>グループ化(&amp;G)</translation>
<source>Raise to &amp;Top</source>
<translation>最前面に移動(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1317"/>
<source>&amp;Ungroup</source>
<translation>グループ解除(&amp;U)</translation>
<source>&amp;Lower</source>
<translation>背面へ(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1318"/>
<source>Is &amp;Locked</source>
<translation>ロック(&amp;L)</translation>
<source>&amp;Raise</source>
<translation>前面へ(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1319"/>
<source>Si&amp;ze is Locked</source>
<translation>サイズをロック(&amp;Z)</translation>
<source>Send to S&amp;crapbook</source>
<translation>スクラップブックに送る(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1323"/>
<source>Lower to &amp;Bottom</source>
<translation type="unfinished"></translation>
<source>&amp;Attributes...</source>
<translation>属性(&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1324"/>
<source>Raise to &amp;Top</source>
<translation type="unfinished"></translation>
<source>More Info...</source>
<translation>詳細な情報...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Lower</source>
<translation>背面へ(&amp;L)</translation>
<source>I&amp;mage Visible</source>
<translation>画像表示が可能(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<source>&amp;Raise</source>
<translation>前面へ(&amp;R)</translation>
<source>&amp;Update Image</source>
<translation>画像を更新(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<source>Send to S&amp;crapbook</source>
<translation>スクラップブックに送る(&amp;C)</translation>
<source>Adjust Frame to Image</source>
<translation>フレームを画像に合わせる</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<source>&amp;Attributes...</source>
<translation>属性(&amp;A)...</translation>
<source>Extended Image Properties</source>
<translation>拡張画像のプロパティ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<source>More Info...</source>
<translation>詳細な情報...</translation>
<source>&amp;Low Resolution</source>
<translation>低解像度(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<source>I&amp;mage Visible</source>
<translation>画像表示が可能(&amp;M)</translation>
<source>&amp;Normal Resolution</source>
<translation>標準解像度(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<source>&amp;Update Image</source>
<translation>画像を更新(&amp;U)</translation>
<source>&amp;Full Resolution</source>
<translation>最大解像度(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>Adjust Frame to Image</source>
<translation>フレームを画像に合わせる</translation>
<source>Is PDF &amp;Bookmark</source>
<translation>PDFブックマーク(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<source>Extended Image Properties</source>
<translation>拡張画像のプロパティ</translation>
<source>Is PDF A&amp;nnotation</source>
<translation>PDF注釈(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1335"/>
<source>&amp;Low Resolution</source>
<translation>低解像度(&amp;L)</translation>
<source>Annotation P&amp;roperties</source>
<translation>注釈のプロパティ(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<source>&amp;Normal Resolution</source>
<translation>標準解像度(&amp;N)</translation>
<source>Field P&amp;roperties</source>
<translation>フィールドのプロパティ(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<source>&amp;Full Resolution</source>
<translation>最大解像度(&amp;F)</translation>
<source>&amp;Edit Shape...</source>
<translation>形状を編集(&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1338"/>
<source>Is PDF &amp;Bookmark</source>
<translation>PDFブックマーク(&amp;B)</translation>
<source>&amp;Attach Text to Path</source>
<translation>テキストをパスに合わせる(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1339"/>
<source>Is PDF A&amp;nnotation</source>
<translation>PDF注釈(&amp;N)</translation>
<source>&amp;Detach Text from Path</source>
<translation>テキストをパスから離す(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<source>Annotation P&amp;roperties</source>
<translation>注釈のプロパティ(&amp;R)</translation>
<source>&amp;Combine Polygons</source>
<translation>多角形を結合(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<source>Field P&amp;roperties</source>
<translation>フィールドのプロパティ(&amp;R)</translation>
<source>Split &amp;Polygons</source>
<translation>多角形を分割(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<source>&amp;Edit Shape...</source>
<translation>形状を編集(&amp;E)...</translation>
<source>&amp;Bezier Curve</source>
<translation>ベジエ曲線(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<source>&amp;Attach Text to Path</source>
<translation type="unfinished"></translation>
<source>&amp;Image Frame</source>
<translation>画像フレーム(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<source>&amp;Detach Text from Path</source>
<translation type="unfinished"></translation>
<source>&amp;Polygon</source>
<translation>多角形(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<source>&amp;Combine Polygons</source>
<translation>多角形を結合(&amp;C)</translation>
<source>&amp;Text Frame</source>
<translation>テキストフレーム(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<source>Split &amp;Polygons</source>
<translation>多角形を分割(&amp;P)</translation>
<source>&amp;Glyph...</source>
<translation>グリフ(&amp;G)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>&amp;Bezier Curve</source>
<translation>ベジエ曲線(&amp;B)</translation>
<source>Sample Text</source>
<translation>サンプルテキスト</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Image Frame</source>
<translation>画像フレーム(&amp;I)</translation>
<source>&amp;Insert...</source>
<translation>挿入(&amp;I)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Outlines</source>
<translation type="obsolete">アウトライン(&amp;O)</translation>
<source>Im&amp;port...</source>
<translation>インポート(&amp;P)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<source>&amp;Polygon</source>
<translation>多角形(&amp;P)</translation>
<source>&amp;Delete...</source>
<translation>削除(&amp;D)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<source>&amp;Text Frame</source>
<translation>テキストフレーム(&amp;T)</translation>
<source>&amp;Copy...</source>
<translation>コピー(&amp;C)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>&amp;Glyph...</source>
<translation>グリフ(&amp;G)...</translation>
<source>&amp;Move...</source>
<translation>移動(&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<source>Sample Text</source>
<translation>サンプルテキスト</translation>
<source>&amp;Apply Master Page...</source>
<translation>マスターページに適用(&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<source>&amp;Insert...</source>
<translation>挿入(&amp;I)...</translation>
<source>Convert to Master Page...</source>
<translation>マスターページに変換...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<source>Im&amp;port...</source>
<translation>インポート(&amp;P)...</translation>
<source>Manage &amp;Guides...</source>
<translation>ガイドを管理(&amp;G)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<source>&amp;Delete...</source>
<translation>削除(&amp;D)...</translation>
<source>Manage Page Properties...</source>
<translation>ページプロパティを管理...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<source>&amp;Copy...</source>
<translation>コピー(&amp;C)...</translation>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1364"/>
<source>&amp;Move...</source>
<translation>移動(&amp;M)...</translation>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1365"/>
<source>&amp;Apply Master Page...</source>
<translation>マスターページに適用(&amp;A)...</translation>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<source>Convert to Master Page...</source>
<translation>マスターページに変換...</translation>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<source>Manage &amp;Guides...</source>
<translation>ガイドを管理(&amp;G)...</translation>
<source>Show &amp;Margins</source>
<translation>マージンを表示(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<source>Manage Page Properties...</source>
<translation>ページプロパティを管理...</translation>
<source>Show &amp;Frames</source>
<translation>フレームを表示(&amp;F)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Fit in window</source>
<translation type="obsolete">ウィンドウに合わせる(&amp;F)</translation>
<source>Show &amp;Images</source>
<translation>画像を表示(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
<source>Show &amp;Grid</source>
<translation>グリッドを表示(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
<source>Show G&amp;uides</source>
<translation>ガイドを表示(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
<source>Show &amp;Baseline Grid</source>
<translation>ベースライングリッドを表示(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
<source>Show &amp;Text Chain</source>
<translation>テキストチェーンを表示(&amp;T)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Thumbnails</source>
<translation type="obsolete">サムネイル(&amp;T)</translation>
<source>Show Control Characters</source>
<translation>制御文字を表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<source>Show &amp;Margins</source>
<translation>マージンを表示(&amp;M)</translation>
<source>Sn&amp;ap to Grid</source>
<translation>グリッドに合わせる(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1381"/>
<source>Show &amp;Frames</source>
<translation>フレームを表示(&amp;F)</translation>
<source>Sna&amp;p to Guides</source>
<translation>ガイドに合わせる(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<source>Show &amp;Images</source>
<translation>画像を表示(&amp;I)</translation>
<source>&amp;Properties</source>
<translation>プロパティ(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<source>Show &amp;Grid</source>
<translation>グリッドを表示(&amp;G)</translation>
<source>&amp;Scrapbook</source>
<translation>スクラップブック(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<source>Show G&amp;uides</source>
<translation>ガイドを表示(&amp;U)</translation>
<source>&amp;Layers</source>
<translation>レイヤー(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1387"/>
<source>Show &amp;Baseline Grid</source>
<translation>ベースライングリッドを表示(&amp;B)</translation>
<source>&amp;Arrange Pages</source>
<translation>ページの配置(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<source>Show &amp;Text Chain</source>
<translation>テキストチェーンを表示(&amp;T)</translation>
<source>&amp;Bookmarks</source>
<translation>ブックマーク(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<source>Show Control Characters</source>
<translation>制御文字を表示</translation>
<source>&amp;Measurements</source>
<translation>計測(&amp;M)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation type="obsolete">ページに相対するルーラ</translation>
<source>Action &amp;History</source>
<translation>アクション履歴(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<source>Sn&amp;ap to Grid</source>
<translation>グリッドに合わせる(&amp;A)</translation>
<source>Preflight &amp;Verifier</source>
<translation>プリフライト検証(&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<source>Sna&amp;p to Guides</source>
<translation>ガイドに合わせる(&amp;P)</translation>
<source>&amp;Align and Distribute</source>
<translation>整列と配置(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1398"/>
<source>&amp;Properties</source>
<translation>プロパティ(&amp;P)</translation>
<source>&amp;Tools</source>
<translation>ツール(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<source>&amp;Scrapbook</source>
<translation>スクラップブック(&amp;S)</translation>
<source>P&amp;DF Tools</source>
<translation>PDFツール(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<source>&amp;Layers</source>
<translation>レイヤー(&amp;L)</translation>
<source>Select Item</source>
<translation>アイテムを選択</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<source>&amp;Arrange Pages</source>
<translation>ページの配置(&amp;A)</translation>
<source>Rotate Item</source>
<translation>アイテムを回転</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<source>&amp;Bookmarks</source>
<translation>ブックマーク(&amp;B)</translation>
<source>Zoom in or out</source>
<translation>ズームイン/アウト</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<source>&amp;Measurements</source>
<translation>計測(&amp;M)</translation>
<source>Zoom in</source>
<translation>ズームイン</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<source>Action &amp;History</source>
<translation>アクション履歴(&amp;H)</translation>
<source>Zoom out</source>
<translation>ズームアウト</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Preflight &amp;Verifier</source>
<translation>プリフライト検証(&amp;V)</translation>
<source>Edit Contents of Frame</source>
<translation>フレームの内容を編集</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
<source>&amp;Align and Distribute</source>
<translation>整列と配置(&amp;A)</translation>
<source>Edit Text...</source>
<translation>テキストを編集...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1408"/>
<source>&amp;Tools</source>
<translation>ツール(&amp;T)</translation>
<source>Link Text Frames</source>
<translation>テキストフレームを繋ぐ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1409"/>
<source>P&amp;DF Tools</source>
<translation>PDFツール(&amp;D)</translation>
<source>Unlink Text Frames</source>
<translation>テキストフレームを離す</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1412"/>
<source>Select Item</source>
<translation type="unfinished"></translation>
<source>&amp;Eye Dropper</source>
<translation>スポイト(&amp;E)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1351"/>
<source>T&amp;able</source>
<translation type="obsolete">テーブル(&amp;A)</translation>
<source>Copy Item Properties</source>
<translation>アイテムのプロパティをコピー</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1352"/>
<source>&amp;Shape</source>
<translation type="obsolete">形状(&amp;S)</translation>
<source>&amp;Hyphenate Text</source>
<translation>テキストをハイフンでつなぐ(&amp;H)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1354"/>
<source>&amp;Line</source>
<translation type="obsolete">線(&amp;L)</translation>
<source>Dehyphenate Text</source>
<translation>テキストのハイフンを取る</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1356"/>
<source>&amp;Freehand Line</source>
<translation type="obsolete">フリーハンド線(&amp;F)</translation>
<source>&amp;Generate Table Of Contents</source>
<translation>目次を生成(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1413"/>
<source>Rotate Item</source>
<translation>アイテムを回転</translation>
<source>&amp;Cascade</source>
<translation>カスケード表示(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<source>Zoom in or out</source>
<translation>ズームイン/アウト</translation>
<source>&amp;Tile</source>
<translation>タイル表示(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<source>Zoom in</source>
<translation>ズームイン</translation>
<source>&amp;About Scribus</source>
<translation>Scribusについて(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<source>Zoom out</source>
<translation>ズームアウト</translation>
<source>About &amp;Qt</source>
<translation>Qtについて(&amp;Q)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<source>Edit Contents of Frame</source>
<translation>フレームの内容を編集</translation>
<source>Toolti&amp;ps</source>
<translation>ツールチップ(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>Edit Text...</source>
<translation>テキストを編集...</translation>
<source>Scribus &amp;Manual...</source>
<translation>Scribusマニュアル(&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<source>Link Text Frames</source>
<translation>テキストフレームを繋ぐ</translation>
<source>Smart &amp;Hyphen</source>
<translation>スマートハイフン(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<source>Unlink Text Frames</source>
<translation>テキストフレームを離す</translation>
<source>Non Breaking Dash</source>
<translation>改行なしダッシュ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<source>&amp;Eye Dropper</source>
<translation>スポイト(&amp;E)</translation>
<source>Non Breaking &amp;Space</source>
<translation>改行なしスペース(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
<source>Copy Item Properties</source>
<translation>アイテムのプロパティをコピー</translation>
<source>Page &amp;Number</source>
<translation>ページ番号(&amp;N)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1368"/>
<source>Edit the text with the Story Editor</source>
<translation type="obsolete">ストーリエディタでテキストを編集</translation>
<source>Frame Break</source>
<translation>改フレーム</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1370"/>
<source>Insert Text Frame</source>
<translation type="obsolete">テキストフレームを挿入</translation>
<source>Column Break</source>
<translation>改コラム</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1371"/>
<source>Insert Image Frame</source>
<translation type="obsolete">画像フレームを挿入</translation>
<source>Copyright</source>
<translation>著作権</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1372"/>
<source>Insert Table</source>
<translation type="obsolete">テーブルを挿入</translation>
<source>Registered Trademark</source>
<translation>登録商標</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1373"/>
<source>Insert Shape</source>
<translation type="obsolete">形状を挿入</translation>
<source>Trademark</source>
<translation>商標</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1374"/>
<source>Insert Polygon</source>
<translation type="obsolete">多角形を挿入</translation>
<source>Bullet</source>
<translation>黒点</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1375"/>
<source>Insert Line</source>
<translation type="obsolete">線を挿入</translation>
<source>Em Dash</source>
<translation>emダッシュ</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1376"/>
<source>Insert Bezier Curve</source>
<translation type="obsolete">ベジエ曲線を挿入</translation>
<source>En Dash</source>
<translation>enダッシュ</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1377"/>
<source>Insert Freehand Line</source>
<translation type="obsolete">フリーハンド線を挿入</translation>
<source>Figure Dash</source>
<translation>figureダッシュ</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1412"/>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">画像を管理(&amp;M)</translation>
<source>Quotation Dash</source>
<translation>quotationダッシュ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1445"/>
<source>&amp;Hyphenate Text</source>
<translation>テキストをハイフンでつなぐ(&amp;H)</translation>
<source>Toggle Palettes</source>
<translation>パレットを切替え</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<source>Dehyphenate Text</source>
<translation>テキストのハイフンを取る</translation>
<source>Toggle Guides</source>
<translation>ガイドを切替え</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<source>&amp;Generate Table Of Contents</source>
<translation>目次を生成(&amp;G)</translation>
<source>Paste (&amp;Absolute)</source>
<translation>貼り付け (絶対)(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<source>&amp;Cascade</source>
<translation>カスケード表示(&amp;C)</translation>
<source>C&amp;lear</source>
<translation>クリア(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1451"/>
<source>&amp;Tile</source>
<translation>タイル表示(&amp;T)</translation>
<source>S&amp;tyles...</source>
<translation>スタイル(&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
<source>&amp;About Scribus</source>
<translation>Scribusについて(&amp;A)</translation>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>アウトライン(&amp;O)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1423"/>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">プラグインについて(&amp;A)</translation>
<source>&amp;Printing Enabled</source>
<translation>印刷可能(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<source>About &amp;Qt</source>
<translation>Qtについて(&amp;Q)</translation>
<source>&amp;Flip Horizontally</source>
<translation>水平方向に反転(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<source>Toolti&amp;ps</source>
<translation>ツールチップ(&amp;P)</translation>
<source>&amp;Flip Vertically</source>
<translation>垂直方向に反転(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1458"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribusマニュアル(&amp;M)...</translation>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>アウトライン(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1476"/>
<source>Smart &amp;Hyphen</source>
<translation>スマートハイフン(&amp;H)</translation>
<source>Show Rulers</source>
<translation>定規を表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1477"/>
<source>Non Breaking Dash</source>
<translation>改行なしダッシュ</translation>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>アウトライン(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<source>Non Breaking &amp;Space</source>
<translation>改行なしスペース(&amp;S)</translation>
<source>Insert PDF Push Button</source>
<translation>PDFプッシュボタンを挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<source>Page &amp;Number</source>
<translation>ページ番号(&amp;N)</translation>
<source>Insert PDF Text Field</source>
<translation>PDFテキストフィールドを挿入</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>New Line</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">復帰改行</translation>
<source>Insert PDF Check Box</source>
<translation>PDFチェックボックスを挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1482"/>
<source>Frame Break</source>
<translation type="unfinished"></translation>
<source>Insert PDF Combo Box</source>
<translation>PDFコンボボックスを挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1483"/>
<source>Column Break</source>
<translation>改コラム</translation>
<source>Insert PDF List Box</source>
<translation>PDFリストボックスを挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Copyright</source>
<translation>著作権</translation>
<source>Insert Text Annotation</source>
<translation>テキストの注釈を挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1487"/>
<source>Registered Trademark</source>
<translation>登録商標</translation>
<source>Insert Link Annotation</source>
<translation>リンクの注釈を挿入</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
<source>Trademark</source>
<translation>商標</translation>
<source>New Line</source>
<translation>復帰改行</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<source>Bullet</source>
<translation type="unfinished"></translation>
<source>Solidus</source>
<translation>固相線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1492"/>
<source>Em Dash</source>
<translation>emダッシュ</translation>
<source>Middle Dot</source>
<translation>中黒</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1493"/>
<source>En Dash</source>
<translation>enダッシュ</translation>
<source>En Space</source>
<translation>Enスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1494"/>
<source>Figure Dash</source>
<translation>figureダッシュ</translation>
<source>Em Space</source>
<translation>Emスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Quotation Dash</source>
<translation>quotationダッシュ</translation>
<source>Thin Space</source>
<translation>Thinスペース</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Apostrophe</source>
<translation type="obsolete">アポストロフィー</translation>
<source>Thick Space</source>
<translation>Thickスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<source>Toggle Palettes</source>
<translation>パレットを切替え</translation>
<source>Mid Space</source>
<translation>Midスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>Toggle Guides</source>
<translation>ガイドを切替え</translation>
<source>Hair Space</source>
<translation>ヘアスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<source>Paste (&amp;Absolute)</source>
<translation type="unfinished"></translation>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<source>C&amp;lear</source>
<translation type="unfinished">クリア(&amp;L)</translation>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
<source>S&amp;tyles...</source>
<translation type="unfinished"></translation>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1306"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation type="unfinished">アウトライン(&amp;O)</translation>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1320"/>
<source>&amp;Printing Enabled</source>
<translation type="unfinished"></translation>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1321"/>
<source>&amp;Flip Horizontally</source>
<translation type="unfinished"></translation>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1322"/>
<source>&amp;Flip Vertically</source>
<translation type="unfinished"></translation>
<source>st</source>
<translation>st</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation type="unfinished">アウトライン(&amp;O)</translation>
<source>Save as &amp;EPS...</source>
<translation>EPS形式で保存(&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<source>Show Rulers</source>
<translation type="unfinished"></translation>
<source>Show Text Frame Columns</source>
<translation>テキストフレームの行を表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation type="unfinished">アウトライン(&amp;O)</translation>
<source>&amp;Frame...</source>
<translation>フレーム(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<source>Insert PDF Push Button</source>
<translation type="unfinished"></translation>
<source>Preview Mode</source>
<translation>プレビューモード</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<source>Insert PDF Text Field</source>
<translation type="unfinished"></translation>
<source>Show Layer Indicators</source>
<translation>レイヤー目印を表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<source>Insert PDF Check Box</source>
<translation type="unfinished"></translation>
<source>Patterns...</source>
<translation>パターン...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<source>Insert PDF Combo Box</source>
<translation type="unfinished"></translation>
<source>Send to Patterns</source>
<translation>パターンに送る</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1438"/>
<source>Insert PDF List Box</source>
<translation type="unfinished"></translation>
<source>Sticky Tools</source>
<translation>スティッキーツール</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1439"/>
<source>Insert Text Annotation</source>
<translation type="unfinished"></translation>
<source>&amp;Fit to Height</source>
<translation>高さに合わせる(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<source>Insert Link Annotation</source>
<translation type="unfinished"></translation>
<source>Fit to Width</source>
<translation>幅に合わせる</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>New Line</source>
<translation type="unfinished">復帰改行</translation>
<source>Show Bleeds</source>
<translation>断ち切りを表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1489"/>
<source>Solidus</source>
<translation type="unfinished"></translation>
<source>&amp;Zero Width Space</source>
<translation>ゼロ幅スペース(&amp;Z)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<source>Middle Dot</source>
<translation type="unfinished"></translation>
<source>Zero Width NB Space</source>
<translation>ゼロ幅NBスペース</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<source>En Space</source>
<translation type="unfinished"></translation>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>アポストロフィー</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<source>Em Space</source>
<translation type="unfinished"></translation>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Thin Space</source>
<translation type="unfinished"></translation>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<source>Thick Space</source>
<translation type="unfinished"></translation>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Mid Space</source>
<translation type="unfinished"></translation>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<source>Hair Space</source>
<translation type="unfinished"></translation>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1533"/>
<source>ff</source>
<translation type="unfinished"></translation>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1534"/>
<source>fi</source>
<translation type="unfinished"></translation>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1535"/>
<source>fl</source>
<translation type="unfinished"></translation>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>左一重ギュメ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1536"/>
<source>ffi</source>
<translation type="unfinished"></translation>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>右一重ギュメ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1537"/>
<source>ffl</source>
<translation type="unfinished"></translation>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>左二重ギュメ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1538"/>
<source>ft</source>
<translation type="unfinished"></translation>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>右二重ギュメ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1539"/>
<source>st</source>
<translation type="unfinished"></translation>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1246"/>
<source>Save as &amp;EPS...</source>
<translation type="unfinished"></translation>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1386"/>
<source>Show Text Frame Columns</source>
<translation type="unfinished"></translation>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<source>&amp;Frame...</source>
<translation type="unfinished"></translation>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<source>Preview Mode</source>
<translation type="unfinished"></translation>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>Show Layer Indicators</source>
<translation type="unfinished"></translation>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<source>Patterns...</source>
<translation type="unfinished"></translation>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
<source>Send to Patterns</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Text Frame</source>
<translation>テキストフレームを挿入(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<source>Sticky Tools</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Image Frame</source>
<translation>画像フレームを挿入(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<source>&amp;Fit to Height</source>
<translation type="unfinished"></translation>
<source>Insert T&amp;able</source>
<translation>テーブルを挿入(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<source>Fit to Width</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Shape</source>
<translation>形状を挿入(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1380"/>
<source>Show Bleeds</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Polygon</source>
<translation>多角形を挿入(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<source>&amp;Zero Width Space</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Line</source>
<translation>線を挿入(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<source>Zero Width NB Space</source>
<translation type="unfinished"></translation>
<source>Insert &amp;Bezier Curve</source>
<translation>ベジエ曲線を挿入(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation type="unfinished">アポストロフィー</translation>
<source>Insert &amp;Freehand Line</source>
<translation>フリーハンド線を挿入(&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1498"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation type="unfinished"></translation>
<source>Scribus Homepage</source>
<translation>Scribusホームページ</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1499"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation type="unfinished"></translation>
<source>Scribus Online Documentation</source>
<translation>Scribus オンラインドキュメント</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1500"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation type="unfinished"></translation>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1501"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation type="unfinished"></translation>
<source>Getting Started with Scribus</source>
<translation>Scribusをはじめる</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1502"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation type="unfinished"></translation>
<source>Show Context Menu</source>
<translation>コンテキストメニューを表示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1503"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation type="unfinished"></translation>
<source>&amp;Manage Images</source>
<translation>画像を管理(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1504"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation type="unfinished"></translation>
<source>&amp;About Plugins</source>
<translation>プラグインについて(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation type="unfinished"></translation>
<source>Insert Unicode Character Begin Sequence</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation type="unfinished"></translation>
<source>Get Vector File...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation type="unfinished"></translation>
<source>Advanced Select All...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation type="unfinished"></translation>
<source>Edit Source...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation type="unfinished"></translation>
<source>Replace Colors...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation type="unfinished"></translation>
<source>Rulers Relative to Page</source>
<translation>ページに相対する定規</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation type="unfinished"></translation>
<source>Insert &amp;Render Frame</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation type="unfinished"></translation>
<source>Check for Updates</source>
<translation>アップデートをチェック</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation type="unfinished"></translation>
<source>Number of Pages</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;400%</source>
<translation type="unfinished">&amp;200% {400%?}</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1424"/>
<source>Insert &amp;Text Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1425"/>
<source>Insert &amp;Image Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<source>Insert T&amp;able</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<source>Insert &amp;Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<source>Insert &amp;Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<source>Insert &amp;Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<source>Insert &amp;Bezier Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<source>Insert &amp;Freehand Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1459"/>
<source>Scribus Homepage</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1460"/>
<source>Scribus Online Documentation</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1461"/>
<source>Scribus Wiki</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>Getting Started with Scribus</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<source>Show Context Menu</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<source>&amp;Manage Images</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1455"/>
<source>&amp;About Plugins</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1243"/>
<source>Get Vector File...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<source>Advanced Select All...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1269"/>
<source>Edit Source...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Replace Colors...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<source>Rulers Relative to Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<source>Insert &amp;Render Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Check for Updates</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1480"/>
<source>Number of Pages</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>AlignDistribute</name>
<message>
<location filename="../../scribus/aligndistribute.ui" line="35"/>
<source>Align</source>
<translation type="unfinished">整列</translation>
<source>Align</source>
<translation>整列</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="79"/>
<source>&amp;Selected Guide:</source>
<translation type="unfinished">選択されたガイド(&amp;S):</translation>
<source>&amp;Selected Guide:</source>
<translation>選択されたガイド(&amp;S):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="92"/>
<source>&amp;Relative To:</source>
<translation type="unfinished"></translation>
<source>&amp;Relative To:</source>
<translation>相対(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="431"/>
<source>...</source>
<translation type="unfinished"></translation>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="270"/>
<source>Distribute</source>
<translation type="unfinished">配置</translation>
<source>Distribute</source>
<translation>配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="490"/>
<source>&amp;Distance:</source>
<translation type="unfinished">距離(&amp;D):</translation>
<source>&amp;Distance:</source>
<translation>距離(&amp;D):</translation>
</message>
</context>
<context>
<name>AlignDistributeBase</name>
<message>
<location filename="" line="136965632"/>
<source>Align and Distribute</source>
<translation type="obsolete">整列と配置</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Align</source>
<translation type="obsolete">整列</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Selected Guide:</source>
<translation type="obsolete">選択されたガイド(&amp;S):</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Distribute</source>
<translation type="obsolete">配置</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Distance:</source>
<translation type="obsolete">距離(&amp;D):</translation>
</message>
</context>
<context>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="90"/>
<source>Align and Distribute</source>
<translation>整列と配置</translation>
<source>Align and Distribute</source>
<translation>整列と配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation type="unfinished">整列</translation>
<source>Align</source>
<translation>整列</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="93"/>
<source>&amp;Relative to:</source>
<translation type="unfinished"></translation>
<source>&amp;Relative to:</source>
<translation>相対(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="96"/>
<source>First Selected</source>
<translation>最初に選択されたもの</translation>
<source>First Selected</source>
<translation>最初に選択されたもの</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="97"/>
<source>Last Selected</source>
<translation>最後に選択されたもの</translation>
<source>Last Selected</source>
<translation>最後に選択されたもの</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="98"/>
<source>Page</source>
<translation>ページ</translation>
<source>Page</source>
<translation>ページ</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="99"/>
<source>Margins</source>
<translation>マージン</translation>
<source>Margins</source>
<translation>マージン</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="100"/>
<source>Guide</source>
<translation>ガイド</translation>
<source>Guide</source>
<translation>ガイド</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="101"/>
<source>Selection</source>
<translation>選択</translation>
<source>Selection</source>
<translation>選択</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="111"/>
<source>Align bottoms</source>
<translation type="unfinished"></translation>
<source>Align bottoms</source>
<translation>下に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="113"/>
<source>Align right sides</source>
<translation type="unfinished"></translation>
<source>Align right sides</source>
<translation>右側に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="117"/>
<source>Center on vertical axis</source>
<translation type="unfinished"></translation>
<source>Center on vertical axis</source>
<translation>垂直軸の中央に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="119"/>
<source>Align left sides</source>
<translation type="unfinished"></translation>
<source>Align left sides</source>
<translation>左側に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="121"/>
<source>Center on horizontal axis</source>
<translation type="unfinished"></translation>
<source>Center on horizontal axis</source>
<translation>水平軸の中央に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="125"/>
<source>Align tops</source>
<translation type="unfinished"></translation>
<source>Align tops</source>
<translation>上に揃える</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="127"/>
<source>&amp;Selected Guide:</source>
<translation>選択されたガイド(&amp;S):</translation>
<source>&amp;Selected Guide:</source>
<translation>選択されたガイド(&amp;S):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation type="unfinished">配置</translation>
<source>Distribute</source>
<translation>配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="135"/>
<source>Distribute right sides equidistantly</source>
<translation type="unfinished"></translation>
<source>Distribute right sides equidistantly</source>
<translation>右側を等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="137"/>
<source>Distribute bottoms equidistantly</source>
<translation type="unfinished"></translation>
<source>Distribute bottoms equidistantly</source>
<translation>下側を等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="139"/>
<source>Distribute centers equidistantly horizontally</source>
<translation type="unfinished"></translation>
<source>Distribute centers equidistantly horizontally</source>
<translation>中央を水平方向に等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="145"/>
<source>Distribute left sides equidistantly</source>
<translation type="unfinished"></translation>
<source>Distribute left sides equidistantly</source>
<translation>左側を等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="147"/>
<source>Distribute centers equidistantly vertically</source>
<translation type="unfinished"></translation>
<source>Distribute centers equidistantly vertically</source>
<translation>中央を垂直方向に等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="149"/>
<source>Distribute tops equidistantly</source>
<translation type="unfinished"></translation>
<source>Distribute tops equidistantly</source>
<translation>上側を等間隔に配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="159"/>
<source>&amp;Distance:</source>
<translation>距離(&amp;D):</translation>
<source>&amp;Distance:</source>
<translation>距離(&amp;D):</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="160"/>
<source>Distribute the items with the distance specified</source>
<translation type="unfinished"></translation>
<source>Distribute the items with the distance specified</source>
<translation>指定された間隔でアイテムを配置</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="162"/>
<source>None Selected</source>
<translation>何も選択されていません</translation>
<source>None Selected</source>
<translation>何も選択されていません</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Some objects are locked.</source>
<translation type="obsolete">オブジェクトがロックされています。</translation>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Unlock All</source>
<translation type="obsolete">全てロック解除(&amp;U)</translation>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="442"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
<source>Align right sides of items to left side of anchor</source>
<translation>アイテムの右側をアンカーの左側に合わせます</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="450"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
<source>Align left sides of items to right side of anchor</source>
<translation>アイテムの左側をアンカーの右側に合わせます</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="107"/>
<source>Align right sides of items to left side of anchor</source>
<translation type="unfinished"></translation>
<source>Align tops of items to bottom of anchor</source>
<translation>アイテムの上側をアンカーの下側に合わせます</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="109"/>
<source>Align left sides of items to right side of anchor</source>
<translation type="unfinished"></translation>
<source>Align bottoms of items to top of anchor</source>
<translation>アイテムの下側をアンカーの上側に合わせます</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="115"/>
<source>Align tops of items to bottom of anchor</source>
<translation type="unfinished"></translation>
<source>Make horizontal gaps between items equal</source>
<translation>アイテム間の水平ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="123"/>
<source>Align bottoms of items to top of anchor</source>
<translation type="unfinished"></translation>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>アイテム間の水平ギャップを指定された値で均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="130"/>
<source>Make horizontal gaps between items equal</source>
<translation type="unfinished"></translation>
<source>Make vertical gaps between items equal</source>
<translation>アイテム間の垂直ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="132"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation type="unfinished"></translation>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>アイテム間の垂直ギャップを指定された値で均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="141"/>
<source>Make vertical gaps between items equal</source>
<translation type="unfinished"></translation>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>アイテムとページ端との間の水平ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="143"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation type="unfinished"></translation>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>アイテムとページの上下マージンとの間の垂直ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="151"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation type="unfinished"></translation>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>アイテムとページ端のマージンとの間の水平ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="157"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation type="unfinished"></translation>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>アイテムとページの上下との間の垂直ギャップを均等にする</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="155"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation type="unfinished"></translation>
<source>&lt;qt>Align relative to the:&lt;ul>&lt;li>First selected item&lt;/li>&lt;li>Second Selected Item&lt;/li>&lt;li>The current page&lt;/li>&lt;li>The margins of the current page&lt;/li>&lt;li>A Guide&lt;/li>&lt;li>The selection&lt;/ul>&lt;/qt></source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation type="unfinished"></translation>
<source>The location of the selected guide to align to</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="103"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="105"/>
<source>The location of the selected guide to align to</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>AlignSelect</name>
<message>
<location filename="../../scribus/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>テキストを左揃え</translation>
<source>Align Text Left</source>
<translation>テキストを左揃え</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>テキストを右揃え</translation>
<source>Align Text Right</source>
<translation>テキストを右揃え</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>テキストを中央揃え</translation>
<source>Align Text Center</source>
<translation>テキストを中央揃え</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>テキストを両端揃え</translation>
<source>Align Text Justified</source>
<translation>テキストを両端揃え</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>テキストを強制的に両端揃え</translation>
<source>Align Text Forced Justified</source>
<translation>テキストを強制的に両端揃え</translation>
</message>
</context>
<context>
</context>
<context>
<name>Annot</name>
<message>
<location filename="../../scribus/annot.cpp" line="61"/>
<source>Field Properties</source>
<translation>フィールドのプロパティ</translation>
<source>Field Properties</source>
<translation>フィールドのプロパティ</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="533"/>
<source>Type:</source>
<translation>タイプ:</translation>
<source>Type:</source>
<translation>タイプ:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Button</source>
<translation>ボタン</translation>
<source>Button</source>
<translation>ボタン</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Text Field</source>
<translation>テキストフィールド</translation>
<source>Text Field</source>
<translation>テキストフィールド</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Check Box</source>
<translation>チェックボックス</translation>
<source>Check Box</source>
<translation>チェックボックス</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Combo Box</source>
<translation>コンボボックス</translation>
<source>Combo Box</source>
<translation>コンボボックス</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>List Box</source>
<translation>リストボックス</translation>
<source>List Box</source>
<translation>リストボックス</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="111"/>
<source>Properties</source>
<translation>プロパティ</translation>
<source>Properties</source>
<translation>プロパティ</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="121"/>
<source>Name:</source>
<translation>名前:</translation>
<source>Name:</source>
<translation>名前:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Tool-Tip:</source>
<translation type="obsolete">ツールチップ:</translation>
<source>Text</source>
<translation>テキスト</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="274"/>
<source>Text</source>
<translation>テキスト</translation>
<source>Font for use with PDF 1.3:</source>
<translation>PDF 1.3で利用するフォント:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="152"/>
<source>Font for use with PDF 1.3:</source>
<translation>PDF 1.3で利用するフォント:</translation>
<source>Border</source>
<translation>境界</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="176"/>
<source>Border</source>
<translation>境界</translation>
<source>Color:</source>
<translation>色:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="182"/>
<source>Color:</source>
<translation>色:</translation>
<source>None</source>
<translation>なし</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2087"/>
<source>None</source>
<translation>なし</translation>
<source>Width:</source>
<translation>幅:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="197"/>
<source>Width:</source>
<translation>幅:</translation>
<source>Thin</source>
<translation>狭い</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Thin</source>
<translation>狭い</translation>
<source>Normal</source>
<translation>標準</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="311"/>
<source>Normal</source>
<translation>標準</translation>
<source>Wide</source>
<translation>広い</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Wide</source>
<translation>広い</translation>
<source>Style:</source>
<translation>スタイル:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="209"/>
<source>Style:</source>
<translation>スタイル:</translation>
<source>Solid</source>
<translation>実線</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Solid</source>
<translation>実線</translation>
<source>Dashed</source>
<translation>破線</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Dashed</source>
<translation>破線</translation>
<source>Underline</source>
<translation>下線</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Underline</source>
<translation>下線</translation>
<source>Beveled</source>
<translation>斜線</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Beveled</source>
<translation>斜線</translation>
<source>Inset</source>
<translation>挿入</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Inset</source>
<translation>挿入</translation>
<source>Other</source>
<translation>その他</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="224"/>
<source>Other</source>
<translation>その他</translation>
<source>Read Only</source>
<translation>読み込み専用</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="230"/>
<source>Read Only</source>
<translation>読み込み専用</translation>
<source>Required</source>
<translation>必須</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="236"/>
<source>Required</source>
<translation>必須</translation>
<source>Visibility:</source>
<translation>可視性:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Don&apos;t Export Value</source>
<translation type="obsolete">値をエクスポートしない</translation>
<source>Visible</source>
<translation>可視</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="248"/>
<source>Visibility:</source>
<translation type="unfinished"></translation>
<source>Hidden</source>
<translation>隠し</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Visible</source>
<translation type="unfinished"></translation>
<source>No Print</source>
<translation>印刷なし</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Hidden</source>
<translation>隠し</translation>
<source>No View</source>
<translation>ビューなし</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>No Print</source>
<translation>印刷なし</translation>
<source>Appearance</source>
<translation>外観</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="253"/>
<source>No View</source>
<translation>ビューなし</translation>
<source>Text for Button Down</source>
<translation>Button Downのテキスト</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="262"/>
<source>Appearance</source>
<translation>外観</translation>
<source>Text for Roll Over</source>
<translation>Roll Overのテキスト</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="280"/>
<source>Text for Button Down</source>
<translation>Button Downのテキスト</translation>
<source>Icons</source>
<translation>アイコン</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="283"/>
<source>Text for Roll Over</source>
<translation>Roll Overのテキスト</translation>
<source>Use Icons</source>
<translation>アイコンを使用</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="294"/>
<source>Icons</source>
<translation>アイコン</translation>
<source>Remove</source>
<translation>削除</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="300"/>
<source>Use Icons</source>
<translation>アイコンを使用</translation>
<source>Pressed</source>
<translation>Pressed</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="357"/>
<source>Remove</source>
<translation>削除</translation>
<source>Roll Over</source>
<translation>Roll Over</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="329"/>
<source>Pressed</source>
<translation>Pressed</translation>
<source>Icon Placement...</source>
<translation>アイコンの位置ずれ...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="347"/>
<source>Roll Over</source>
<translation>Roll Over</translation>
<source>Highlight</source>
<translation>強調</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="366"/>
<source>Icon Placement...</source>
<translation>アイコンの位置ずれ...</translation>
<source>Invert</source>
<translation>反転</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="414"/>
<source>Highlight</source>
<translation>強調</translation>
<source>Outlined</source>
<translation>アウトライン化</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Invert</source>
<translation>反転</translation>
<source>Push</source>
<translation>押す</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Outlined</source>
<translation>アウトライン化</translation>
<source>Multi-Line</source>
<translation>複数行</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Push</source>
<translation type="unfinished"></translation>
<source>Password</source>
<translation>パスワード</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="438"/>
<source>Multi-Line</source>
<translation>複数行</translation>
<source>Characters</source>
<translation>文字</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="442"/>
<source>Password</source>
<translation>パスワード</translation>
<source>Do Not Scroll</source>
<translation>スクロールしない</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Limit of</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">制限</translation>
<source>Do Not Spell Check</source>
<translation>スペルチェックしない</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="460"/>
<source>Characters</source>
<translation>文字</translation>
<source>Check Style:</source>
<translation>スタイルをチェック:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="466"/>
<source>Do Not Scroll</source>
<translation>スクロールしない</translation>
<source>Check</source>
<translation>チェック</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="470"/>
<source>Do Not Spell Check</source>
<translation>スペルチェックしない</translation>
<source>Cross</source>
<translation>十字</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="485"/>
<source>Check Style:</source>
<translation>スタイルをチェック:</translation>
<source>Diamond</source>
<translation>ダイアモンド</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Check</source>
<translation>チェック</translation>
<source>Circle</source>
<translation>円</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Cross</source>
<translation>十字</translation>
<source>Star</source>
<translation>星</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Diamond</source>
<translation>ダイアモンド</translation>
<source>Square</source>
<translation>四角</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Circle</source>
<translation>円</translation>
<source>Editable</source>
<translation>編集可能</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Star</source>
<translation>星</translation>
<source>Options</source>
<translation>オプション</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Square</source>
<translation>四角</translation>
<source>JavaScript</source>
<translation>JavaScript</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Default is Checked</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">デフォルトでチェック</translation>
<source>Go To</source>
<translation>移動</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="514"/>
<source>Editable</source>
<translation>編集可能</translation>
<source>Submit Form</source>
<translation>送信フォーム</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="521"/>
<source>Options</source>
<translation>オプション</translation>
<source>Reset Form</source>
<translation>リセットフォーム</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2088"/>
<source>JavaScript</source>
<translation>JavaScript</translation>
<source>Import Data</source>
<translation>データをインポート</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2050"/>
<source>Go To</source>
<translation>移動</translation>
<source>Event:</source>
<translation>イベント:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2051"/>
<source>Submit Form</source>
<translation>送信フォーム</translation>
<source>Mouse Up</source>
<translation>Mouse Up</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2051"/>
<source>Reset Form</source>
<translation>リセットフォーム</translation>
<source>Mouse Down</source>
<translation>Mouse Down</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2051"/>
<source>Import Data</source>
<translation>データをインポート</translation>
<source>Mouse Enter</source>
<translation>Mouse Enter</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="570"/>
<source>Event:</source>
<translation>イベント:</translation>
<source>Mouse Exit</source>
<translation>Mouse Exit</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2030"/>
<source>Mouse Up</source>
<translation>Mouse Up</translation>
<source>On Focus</source>
<translation>On Focus</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2030"/>
<source>Mouse Down</source>
<translation>Mouse Down</translation>
<source>On Blur</source>
<translation>On Blur</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2030"/>
<source>Mouse Enter</source>
<translation>Mouse Enter</translation>
<source>Script:</source>
<translation>スクリプト:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2031"/>
<source>Mouse Exit</source>
<translation>Mouse Exit</translation>
<source>Edit...</source>
<translation>編集...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2031"/>
<source>On Focus</source>
<translation>On Focus</translation>
<source>Submit to URL:</source>
<translation>以下のURLに送信:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2031"/>
<source>On Blur</source>
<translation>On Blur</translation>
<source>Submit Data as HTML</source>
<translation>データをHTMLとして送信</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="585"/>
<source>Script:</source>
<translation>スクリプト:</translation>
<source>Import Data from:</source>
<translation>以下からデータをインポート:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1095"/>
<source>Edit...</source>
<translation>編集...</translation>
<source>Destination</source>
<translation>出力先</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="670"/>
<source>Submit to URL:</source>
<translation>以下のURLに送信:</translation>
<source>To File:</source>
<translation>ファイルへ:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="678"/>
<source>Submit Data as HTML</source>
<translation>データをHTMLとして送信</translation>
<source>Change...</source>
<translation>変更...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="691"/>
<source>Import Data from:</source>
<translation>以下からデータをインポート:</translation>
<source>Page:</source>
<translation>ページ:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="610"/>
<source>Destination</source>
<translation>出力先</translation>
<source>X-Pos:</source>
<translation>位置X:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="616"/>
<source>To File:</source>
<translation>ファイルへ:</translation>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="623"/>
<source>Change...</source>
<translation>変更...</translation>
<source>Y-Pos:</source>
<translation>位置Y:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="632"/>
<source>Page:</source>
<translation>ページ:</translation>
<source>Action</source>
<translation>アクション</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="646"/>
<source>X-Pos:</source>
<translation>位置X:</translation>
<source>Field is formatted as:</source>
<translation>フィールドをフォーマット:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="658"/>
<source> pt</source>
<translation> pt</translation>
<source>Plain</source>
<translation>プレーン</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="654"/>
<source>Y-Pos:</source>
<translation>位置Y:</translation>
<source>Number</source>
<translation>数字</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="700"/>
<source>Action</source>
<translation>アクション</translation>
<source>Percentage</source>
<translation>パーセント</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="731"/>
<source>Field is formatted as:</source>
<translation>フィールドをフォーマット:</translation>
<source>Date</source>
<translation>日付</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Plain</source>
<translation>プレーン</translation>
<source>Time</source>
<translation>時刻</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Number</source>
<translation>数字</translation>
<source>Custom</source>
<translation>カスタム</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Percentage</source>
<translation>パーセント</translation>
<source>Number Format</source>
<translation>数字のフォーマット</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Date</source>
<translation>日付</translation>
<source>Decimals:</source>
<translation>小数:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Time</source>
<translation>時刻</translation>
<source>Use Currency Symbol</source>
<translation>通貨シンボルを使用</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="734"/>
<source>Custom</source>
<translation>カスタム</translation>
<source>Prepend Currency Symbol</source>
<translation>通貨シンボルを前に追加</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="752"/>
<source>Number Format</source>
<translation>数字のフォーマット</translation>
<source>Formatting</source>
<translation>フォーマット中</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="820"/>
<source>Decimals:</source>
<translation>小数:</translation>
<source>Percent Format</source>
<translation>パーセントのフォーマット</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="775"/>
<source>Use Currency Symbol</source>
<translation>通貨シンボルを使用</translation>
<source>Date Format</source>
<translation>日付のフォーマット</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="784"/>
<source>Prepend Currency Symbol</source>
<translation>通貨シンボルを前に追加</translation>
<source>Time Format</source>
<translation>時刻のフォーマット</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="831"/>
<source>Formatting</source>
<translation>フォーマット中</translation>
<source>Custom Scripts</source>
<translation>カスタムスクリプト</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="811"/>
<source>Percent Format</source>
<translation>パーセントのフォーマット</translation>
<source>Format:</source>
<translation>フォーマット:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="854"/>
<source>Date Format</source>
<translation>日付のフォーマット</translation>
<source>Keystroke:</source>
<translation>キー入力:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="880"/>
<source>Time Format</source>
<translation>時刻のフォーマット</translation>
<source>Format</source>
<translation>フォーマット</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="902"/>
<source>Custom Scripts</source>
<translation>カスタムスクリプト</translation>
<source>Value is not validated</source>
<translation>値は認証されていません</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="914"/>
<source>Format:</source>
<translation>フォーマット:</translation>
<source>Value must be greater than or equal to:</source>
<translation>値は等しいか大きいものでなければなりません:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="940"/>
<source>Keystroke:</source>
<translation>キー入力:</translation>
<source>and less or equal to:</source>
<translation>等しいか少ない:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="964"/>
<source>Format</source>
<translation>フォーマット</translation>
<source>Custom validate script:</source>
<translation>カスタム認証スクリプト:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="980"/>
<source>Value is not validated</source>
<translation>値は認証されていません</translation>
<source>Validate</source>
<translation>認証</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="989"/>
<source>Value must be greater than or equal to:</source>
<translation>値は等しいか大きいものでなければなりません:</translation>
<source>Value is not calculated</source>
<translation>値は計算されていません</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="993"/>
<source>and less or equal to:</source>
<translation>等しいか少ない:</translation>
<source>Value is the</source>
<translation>値は</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1004"/>
<source>Custom validate script:</source>
<translation>カスタム認証スクリプト:</translation>
<source>sum</source>
<translation>合計</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1025"/>
<source>Validate</source>
<translation>認証</translation>
<source>product</source>
<translation>積</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1042"/>
<source>Value is not calculated</source>
<translation>値は計算されていません</translation>
<source>average</source>
<translation>平均</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1051"/>
<source>Value is the</source>
<translation>値は</translation>
<source>minimum</source>
<translation>最小</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1056"/>
<source>sum</source>
<translation>合計</translation>
<source>maximum</source>
<translation>最大</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1056"/>
<source>product</source>
<translation>積</translation>
<source>of the following fields:</source>
<translation>以下のフィールド:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1056"/>
<source>average</source>
<translation>平均</translation>
<source>Pick...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1056"/>
<source>minimum</source>
<translation>最小</translation>
<source>Custom calculation script:</source>
<translation>カスタム計算スクリプト:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1057"/>
<source>maximum</source>
<translation>最大</translation>
<source>Calculate</source>
<translation>計算</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1064"/>
<source>of the following fields:</source>
<translation>以下のフィールド:</translation>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1074"/>
<source>Pick...</source>
<translation type="unfinished"></translation>
<source>Cancel</source>
<translation>キャンセル</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1079"/>
<source>Custom calculation script:</source>
<translation>カスタム計算スクリプト:</translation>
<source>Flag is ignored for PDF 1.3</source>
<translation>フラグはPDF 1.3では無視されます</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1099"/>
<source>Calculate</source>
<translation>計算</translation>
<source>Enter a comma separated list of fields here</source>
<translation>ここにカンマ区切りのフィールドのリストを入力してください</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1118"/>
<source>OK</source>
<translation>OK</translation>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>ボタンにアイコンを使うには正常なアイコンが少なくとも必要です</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1122"/>
<source>Cancel</source>
<translation>キャンセル</translation>
<source>Open</source>
<translation>開く</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1174"/>
<source>Flag is ignored for PDF 1.3</source>
<translation>フラグはPDF 1.3では無視されます</translation>
<source>Example:</source>
<translation>例:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1175"/>
<source>Enter a comma separated list of fields here</source>
<translation>ここにカンマ区切りのフィールドのリストを入力してください</translation>
<source>Selection Change</source>
<translation>選択を変更</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1176"/>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>ボタンにアイコンを使うには正常なアイコンが少なくとも必要です</translation>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDFファイル (*.pdf);;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2244"/>
<source>Open</source>
<translation>開く</translation>
<source>None</source>
<comment>highlight</comment>
<translation>なし</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*)</source>
<translation type="obsolete">画像 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全てのファイル (*)</translation>
<source>Limit of</source>
<translation>制限</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1453"/>
<source>Example:</source>
<translation>例:</translation>
<source>Default is Checked</source>
<translation>標準でチェック</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2079"/>
<source>Selection Change</source>
<translation>選択を変更</translation>
<source>None</source>
<comment>action</comment>
<translation>なし</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2244"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDFファイル (*.pdf);;全てのファイル (*)</translation>
<source>Tooltip:</source>
<translation>ツールチップ:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>None</source>
<comment>highlight</comment>
<translation type="unfinished">なし</translation>
<source>Do Not Export Value</source>
<translation>値を出力しない</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<source>Limit of</source>
<translation type="unfinished">制限</translation>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>画像 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<source>Default is Checked</source>
<translation type="unfinished">デフォルトでチェック</translation>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation>画像 (*.tif *.png *.jpg *.xpm);;%1;;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2050"/>
<source>None</source>
<comment>action</comment>
<translation type="unfinished">なし</translation>
<source>Export absolute Filename</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1342"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1287"/>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="625"/>
<source>Export absolute Filename</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>Annota</name>
<message>
<location filename="../../scribus/annota.cpp" line="47"/>
<source>Annotation Properties</source>
<translation>注釈のプロパティ</translation>
<source>Annotation Properties</source>
<translation>注釈のプロパティ</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="77"/>
<source>Text</source>
<translation>テキスト</translation>
<source>Text</source>
<translation>テキスト</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="78"/>
<source>Link</source>
<translation>リンク</translation>
<source>Link</source>
<translation>リンク</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="79"/>
<source>External Link</source>
<translation>外部リンク</translation>
<source>External Link</source>
<translation>外部リンク</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>外部ウェブリンク</translation>
<source>External Web-Link</source>
<translation>外部ウェブリンク</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="82"/>
<source>&amp;Type:</source>
<translation>タイプ(&amp;T):</translation>
<source>&amp;Type:</source>
<translation>タイプ(&amp;T):</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="118"/>
<source>Destination</source>
<translation>出力先</translation>
<source>Destination</source>
<translation>出力先</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="129"/>
<source>C&amp;hange...</source>
<translation>変更(&amp;H)...</translation>
<source>C&amp;hange...</source>
<translation>変更(&amp;H)...</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="147"/>
<source>&amp;Page:</source>
<translation>ページ(&amp;P):</translation>
<source>&amp;Page:</source>
<translation>ページ(&amp;P):</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="177"/>
<source> pt</source>
<translation> pt</translation>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="171"/>
<source>&amp;X-Pos</source>
<translation>位置&amp;X</translation>
<source>&amp;X-Pos</source>
<translation>位置&amp;X</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="179"/>
<source>&amp;Y-Pos:</source>
<translation>位置&amp;Y:</translation>
<source>&amp;Y-Pos:</source>
<translation>位置&amp;Y:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>Open</source>
<translation>開く</translation>
<source>Open</source>
<translation>開く</translation>
</message>
<message>
<location filename="../annota.cpp" line="351"/>
<source>PDF-Documents (*.pdf);;All Files (*)</source>
<translation type="obsolete">PDFドキュメント (*.pdf);;全てのファイル (*)</translation>
<source>%1;;All Files (*)</source>
<translation>%1;;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>%1;;All Files (*)</source>
<translation type="unfinished"></translation>
<source>Export absolute Filename</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/annota.cpp" line="131"/>
<source>Export absolute Filename</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<location filename="" line="136965632"/>
<source>Normal</source>
<translation type="obsolete">標準</translation>
<source>Apply Master Page</source>
<translation>マスターページに適用</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
<source>Apply Master Page</source>
<translation>マスターページに適用</translation>
<source>&amp;Master Page:</source>
<translation>マスターページ(&amp;M):</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
<source>&amp;Master Page:</source>
<translation>マスターページ(&amp;M):</translation>
<source>Apply To</source>
<translation>適用先</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply To</source>
<translation>適用先</translation>
<source>Current &amp;page</source>
<translation>現在のページ(&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;page</source>
<translation>現在のページ(&amp;P)</translation>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
<source>&amp;Even pages</source>
<translation>偶数ページ(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even pages</source>
<translation>偶数ページ(&amp;E)</translation>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
<source>O&amp;dd pages</source>
<translation>奇数ページ(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd pages</source>
<translation>奇数ページ(&amp;D)</translation>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
<source>&amp;All pages</source>
<translation>全てのページ(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All pages</source>
<translation>全てのページ(&amp;A)</translation>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
<source>&amp;Within range</source>
<translation>範囲内(&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within range</source>
<translation>範囲内(&amp;W)</translation>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Apply the selected template to even, odd or all pages within the following range</source>
<translation type="obsolete">以下の範囲の偶数、奇数、全てのページに選択したテンプレートを適用する</translation>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>to</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">から</translation>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>選択されたマスターページを、以下の範囲内の偶数、奇数、全てのページに適用します</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
<source>to</source>
<translation>から</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
<source>Possible Hyphenation</source>
<translation>利用可能なハイフネーション</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
<source>to</source>
<translation type="unfinished">から</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation type="unfinished">利用可能なハイフネーション</translation>
</message>
</context>
<context>
<name>ArrowChooser</name>
<message>
<location filename="../arrowchooser.cpp" line="33"/>
<source>None</source>
<translation type="obsolete">なし</translation>
</message>
</context>
<context>
</context>
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="63"/>
<source>Spell-checking support</source>
<translation type="unfinished"></translation>
<source>Spell-checking support</source>
<translation>スペルチェックのサポート</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="68"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="unfinished"></translation>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<source>0.1</source>
<translation type="unfinished"></translation>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="31"/>
<source>Spell Checker</source>
<translation type="unfinished"></translation>
<source>Spell Checker</source>
<translation>スペルチェッカー</translation>
</message>
</context>
<context>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<source>Spell Check</source>
<translation type="unfinished"></translation>
<source>Spell Check</source>
<translation>スペルチェック</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="49"/>
<source>Mis-spelling:</source>
<translation type="unfinished"></translation>
<source>Mis-spelling:</source>
<translation>ミススペル</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="99"/>
<source>Replacement:</source>
<translation type="unfinished"></translation>
<source>Replacement:</source>
<translation>置換:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="140"/>
<source>Active dictionary: </source>
<translation type="unfinished"></translation>
<source>Active dictionary: </source>
<translation>Active dictionary: </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="183"/>
<source>Personal
<source>Personal
Dictionary</source>
<translation type="unfinished"></translation>
<translation>個人ディレクトリ</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="212"/>
<source>&amp;Add Word</source>
<translation type="unfinished"></translation>
<source>&amp;Add Word</source>
<translation>単語を追加(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="241"/>
<source>&amp;Change</source>
<translation type="unfinished"></translation>
<source>&amp;Change</source>
<translation>変更(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="266"/>
<source>C&amp;hange All</source>
<translation type="unfinished"></translation>
<source>C&amp;hange All</source>
<translation>全て変更(&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="291"/>
<source>&amp;Skip</source>
<translation type="unfinished"></translation>
<source>&amp;Skip</source>
<translation>スキップ(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="310"/>
<source>S&amp;kip All</source>
<translation type="unfinished"></translation>
<source>S&amp;kip All</source>
<translation>全てスキップ(&amp;K)</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="351"/>
<source>&amp;Exit</source>
<translation type="unfinished">終了(&amp;E)</translation>
<source>&amp;Exit</source>
<translation>終了(&amp;E)</translation>
</message>
</context>
<context>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<source>Loaded </source>
<translation type="unfinished"></translation>
<source>Loaded </source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<source>default </source>
<translation type="unfinished"></translation>
<source>default </source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<source> aspell dictionary.</source>
<translation type="unfinished"></translation>
<source> aspell dictionary.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="58"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation type="unfinished"></translation>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="65"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation type="unfinished"></translation>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="217"/>
<source>Spell-Checker</source>
<translation type="unfinished"></translation>
<source>Spell-Checker</source>
<translation>スペルチェッカ</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="217"/>
<source>Spell-checking completed.</source>
<translation type="unfinished"></translation>
<source>Spell-checking completed.</source>
<translation>スペルチェック完了</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="228"/>
<source>Spell-checking done.</source>
<translation type="unfinished"></translation>
<source>Spell-checking done.</source>
<translation>スペルチェック終了</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="335"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation type="unfinished"></translation>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="336"/>
<source> by adding it to the session list.</source>
<translation type="unfinished"></translation>
<source> by adding it to the session list.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="358"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation type="unfinished"></translation>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
<source>Arrows</source>
<translation type="unfinished">矢印</translation>
<source>Arrows</source>
<translation>矢印</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
<source>Flow Chart</source>
<translation type="unfinished"></translation>
<source>Flow Chart</source>
<translation>フローチャート</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
<source>Jigsaw</source>
<translation type="unfinished"></translation>
<source>Jigsaw</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
<source>Specials</source>
<translation type="unfinished"></translation>
<source>Specials</source>
<translation>特別</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
<source>Default Shapes</source>
<translation type="unfinished"></translation>
<source>Default Shapes</source>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>Barcode</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="40"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="unfinished"></translation>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation>純粋なPostscriptバーコードライタのScribusフロントエンド</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="23"/>
<source>&amp;Barcode...</source>
<translation type="unfinished"></translation>
<source>&amp;Barcode...</source>
<translation>バーコード(&amp;B)...</translation>
</message>
</context>
<context>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation type="unfinished"></translation>
<source>12 or 13 digits</source>
<translation>12もしくは13桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation type="unfinished"></translation>
<source>8 digits</source>
<translation>8桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation type="unfinished"></translation>
<source>11 or 12 digits</source>
<translation>11もしくは12桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation type="unfinished"></translation>
<source>7 or 8 digits</source>
<translation>7もしくは8桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation type="unfinished"></translation>
<source>5 digits</source>
<translation>5桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation type="unfinished"></translation>
<source>2 digits</source>
<translation>2桁</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation type="unfinished"></translation>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>可変の文字、数字と、いずれかのシンボル -. *$/+%</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation type="unfinished"></translation>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation type="unfinished"></translation>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>可変の数といずれかのシンボル -$:/.+ABCD</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation type="unfinished"></translation>
<source>Variable number of digits</source>
<translation>可変の数</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation type="unfinished"></translation>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation type="unfinished"></translation>
<source>Variable number of digits and capital letters</source>
<translation>可変の数と大文字</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation type="unfinished"></translation>
<source>Variable number of hexadecimal characters</source>
<translation>可変の16進文字</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<source>Error opening file: %1</source>
<translation type="unfinished"></translation>
<source>Error opening file: %1</source>
<translation>ファイルを開く際のエラー: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
<source>Barcode incomplete</source>
<translation type="unfinished"></translation>
<source>Barcode incomplete</source>
<translation>バーコードが不完全です</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation type="unfinished"></translation>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -> 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
<source>Select Type</source>
<translation type="unfinished"></translation>
<source>Select Type</source>
<translation>タイプを選択</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
<source>Select Barcode Type</source>
<translation type="unfinished"></translation>
<source>Select Barcode Type</source>
<translation>バーコードタイプを選択</translation>
</message>
</context>
<context>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="152"/>
<source>&amp;Type:</source>
<translation type="unfinished">タイプ(&amp;T):</translation>
<source>&amp;Type:</source>
<translation>タイプ(&amp;T):</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="132"/>
<source>Co&amp;de:</source>
<translation type="unfinished"></translation>
<source>Co&amp;de:</source>
<translation>コード(&amp;D):</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="145"/>
<source>Select one of the available barcode type here</source>
<translation type="unfinished"></translation>
<source>Select one of the available barcode type here</source>
<translation>利用可能なバーコードの種類を選択してください</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="125"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation type="unfinished"></translation>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>コードそのものを表す数字です。以下のヘルプメッセージを参照してください。</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="115"/>
<source>Reset the barcode samples</source>
<translation type="unfinished"></translation>
<source>Reset the barcode samples</source>
<translation>バーコードのサンプルをリセット</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
<source>&amp;Include text in barcode</source>
<translation type="unfinished"></translation>
<source>&amp;Include text in barcode</source>
<translation>バーコード中にテキストを含める(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="93"/>
<source>Alt+I</source>
<translation type="unfinished"></translation>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="87"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation type="unfinished"></translation>
<source>If checked, there will be numbers in the barcode too</source>
<translation>チェックすると、バーコードに数字も追加します</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
<source>&amp;Guard whitespace</source>
<translation type="unfinished"></translation>
<source>&amp;Guard whitespace</source>
<translation>余白を保護(&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="80"/>
<source>Alt+G</source>
<translation type="unfinished"></translation>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="74"/>
<source>Draw arrows to be sure of space next the code</source>
<translation type="unfinished"></translation>
<source>Draw arrows to be sure of space next the code</source>
<translation>次のコードとのスペースを保つために矢印を表示します</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
<source>I&amp;nclude checksum</source>
<translation type="unfinished"></translation>
<source>I&amp;nclude checksum</source>
<translation>チェックサムを含める(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="67"/>
<source>Alt+N</source>
<translation type="unfinished"></translation>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="61"/>
<source>Generate and include a checksum in barcode</source>
<translation type="unfinished"></translation>
<source>Generate and include a checksum in barcode</source>
<translation>バーコードにチェックサムを含めて生成する</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
<source>Incl&amp;ude checksum digit</source>
<translation type="unfinished"></translation>
<source>Incl&amp;ude checksum digit</source>
<translation>チェックデジットを含める(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="54"/>
<source>Alt+U</source>
<translation type="unfinished">Alt+U</translation>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="48"/>
<source>Include the checksum digit in the barcode text</source>
<translation type="unfinished"></translation>
<source>Include the checksum digit in the barcode text</source>
<translation>バーコードテキストにチェックデジットを含める</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="168"/>
<source>Colors</source>
<translation type="unfinished">色</translation>
<source>Colors</source>
<translation>色</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
<source>&amp;Background</source>
<translation type="unfinished"></translation>
<source>&amp;Background</source>
<translation>背景(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="211"/>
<source>Alt+B</source>
<translation type="unfinished"></translation>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
<source>Background color - under the code lines</source>
<translation type="unfinished"></translation>
<source>Background color - under the code lines</source>
<translation>背景色 - コードの線の背景</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="240"/>
<source>&amp;Lines</source>
<translation type="unfinished"></translation>
<source>&amp;Lines</source>
<translation>線(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="243"/>
<source>Alt+L</source>
<translation type="unfinished">Alt+L</translation>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
<source>Color of the lines in barcode</source>
<translation type="unfinished"></translation>
<source>Color of the lines in barcode</source>
<translation>バーコードの線の色</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="272"/>
<source>&amp;Text</source>
<translation type="unfinished">テキスト(&amp;T)</translation>
<source>&amp;Text</source>
<translation>テキスト(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="275"/>
<source>Alt+T</source>
<translation type="unfinished"></translation>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="269"/>
<source>Color of the text and numbers</source>
<translation type="unfinished"></translation>
<source>Color of the text and numbers</source>
<translation>テキストと数字の色</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="304"/>
<source>Hints and help is shown here</source>
<translation type="unfinished"></translation>
<source>Hints and help is shown here</source>
<translation>ヒントとヘルプがここに表示されます</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="314"/>
<source>Preview of the result. 72dpi sample.</source>
<translation type="unfinished"></translation>
<source>Preview of the result. 72dpi sample.</source>
<translation>結果のプレビュー. 72dpiのサンプル</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<source>Insert Barcode</source>
<translation type="unfinished"></translation>
<source>Insert Barcode</source>
<translation>バーコードを挿入</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
<source>Format</source>
<translation type="unfinished">フォーマット</translation>
<source>Format</source>
<translation>フォーマット</translation>
</message>
</context>
<context>
</context>
<context>
<name>Biblio</name>
<message>
<location filename="" line="136965632"/>
<source>Scrapbooks (*.scs);;All Files (*)</source>
<translation type="obsolete">スクラップブック (*.scs);;全てのファイル (*)</translation>
<source>Rename</source>
<translation>名前を変更</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
<source>Rename</source>
<translation>名前を変更</translation>
<source>Delete</source>
<translation>削除</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
<source>Delete</source>
<translation>削除</translation>
<source>Scrapbook</source>
<translation>スクラップブック</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<source>Scrapbook</source>
<translation>スクラップブック</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>名前 &quot;%1&quot; はすでに存在します。
<translation>名前 &quot;%1&quot; はすでに存在します。
他のものを選択してください。</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<source>Object</source>
<translation>オブジェクト</translation>
<source>Object</source>
<translation>オブジェクト</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>New Entry</source>
<translation>新規エントリ</translation>
<source>New Entry</source>
<translation>新規エントリ</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;File</source>
<translation type="obsolete">ファイル(&amp;F)</translation>
<source>Choose a Scrapbook Directory</source>
<translation>スクラップブックのディレクトリを選択</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Preview</source>
<translation type="obsolete">プレビュー(&amp;P)</translation>
<source>Choose a scrapbook file to import</source>
<translation>インポートするスクラップブックファイルを選択</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;New</source>
<translation type="obsolete">新規(&amp;N)</translation>
<source>Choose a Directory</source>
<translation>ディレクトリを選択</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Load...</source>
<translation type="obsolete">読み込み(&amp;L)...</translation>
<source>Create a new scrapbook page</source>
<translation>新規スクラップブックページを作成</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Save</source>
<translation type="obsolete">保存(&amp;S)</translation>
<source>Load an existing scrapbook</source>
<translation>既存のスクラップブックを読み込む</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Save &amp;As...</source>
<translation type="obsolete">名前を付けて保存(&amp;A)...</translation>
<source>Save the selected scrapbook</source>
<translation>選択されたスクラップブックを保存</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Close</source>
<translation type="obsolete">閉じる(&amp;C)</translation>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Scribus 1.3.2以下からスクラップブックファイルをインポート</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Small</source>
<translation type="obsolete">小(&amp;S)</translation>
<source>Close the selected scrapbook</source>
<translation>選択されたスクラップブックを閉じる</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Medium</source>
<translation type="obsolete">中(&amp;M)</translation>
<source>Copy To:</source>
<translation>コピー:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Large</source>
<translation type="obsolete">大(&amp;L)</translation>
<source>Move To:</source>
<translation>移動:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation type="unfinished"></translation>
<source>Main</source>
<translation>メイン</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation type="unfinished"></translation>
<source>Copied Items</source>
<translation>コピーされたアイテム</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation type="unfinished">ディレクトリを選択</translation>
<source>New Name</source>
<translation>新しい名前:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
<source>Create a new scrapbook page</source>
<translation type="unfinished"></translation>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>スクラップブック (*.scs *.SCS)</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
<source>Load an existing scrapbook</source>
<translation type="unfinished"></translation>
<source>Paste to Page</source>
<translation>ページに貼り付け</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
<source>Save the selected scrapbook</source>
<translation type="unfinished"></translation>
<source>Save as...</source>
<translation>名前を付けて保存...</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation type="unfinished"></translation>
<source>Close</source>
<translation>閉じる</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
<source>Close the selected scrapbook</source>
<translation type="unfinished"></translation>
<source>Delete Contents</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation type="unfinished"></translation>
<source>Do you really want to delete all entries?</source>
<translation>本当に全てのエントリを削除しますか?</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
<source>New Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
<source>Scrapbook (*.scs *.SCS)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
<source>Paste to Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
<source>Save as...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
<source>Close</source>
<translation type="unfinished">閉じる</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
<source>Delete Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
<source>Do you really want to delete all entries?</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BookMView</name>
<message>
<location filename="../bookmwin.cpp" line="219"/>
<source>Move Bookmark</source>
<translation type="obsolete">ブックマークを移動</translation>
</message>
<message>
<location filename="../bookmwin.cpp" line="220"/>
<source>Insert Bookmark</source>
<translation type="obsolete">ブックマークを挿入</translation>
</message>
<message>
<location filename="../bookmwin.cpp" line="221"/>
<source>Cancel</source>
<translation type="obsolete">キャンセル</translation>
</message>
<message>
<location filename="../bookmwin.cpp" line="554"/>
<source>Bookmarks</source>
<translation type="obsolete">ブックマーク</translation>
</message>
</context>
<context>
</context>
<context>
<name>BookPalette</name>
<message>
<location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
<source>Bookmarks</source>
<translation>ブックマーク</translation>
<source>Bookmarks</source>
<translation>ブックマーク</translation>
</message>
</context>
<context>
</context>
<context>
<name>ButtonIcon</name>
<message>
<location filename="../../scribus/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>アイコンの位置ずれ</translation>
<source>Icon Placement</source>
<translation>アイコンの位置ずれ</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>レイアウト:</translation>
<source>Layout:</source>
<translation>レイアウト:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>キャプションのみ</translation>
<source>Caption only</source>
<translation>キャプションのみ</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Icon only</source>
<translation>アイコンのみ</translation>
<source>Icon only</source>
<translation>アイコンのみ</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>アイコンの下にキャプション</translation>
<source>Caption below Icon</source>
<translation>アイコンの下にキャプション</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>アイコンの上にキャプション</translation>
<source>Caption above Icon</source>
<translation>アイコンの上にキャプション</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>アイコンの右にキャプション</translation>
<source>Caption right to Icon</source>
<translation>アイコンの右にキャプション</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>アイコンの左にキャプション</translation>
<source>Caption left to Icon</source>
<translation>アイコンの左にキャプション</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Caption overlays Icon</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">アイコンにオーバーレイでキャプション</translation>
<source>Scale:</source>
<translation>倍率:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>倍率:</translation>
<source>Always</source>
<translation>常に</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>Always</source>
<translation>常に</translation>
<source>When Icon is too small</source>
<translation>アイコンが小さすぎるとき</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>When Icon is too small</source>
<translation>アイコンが小さすぎるとき</translation>
<source>When Icon is too big</source>
<translation>アイコンが大きすぎるとき</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>When Icon is too big</source>
<translation>アイコンが大きすぎるとき</translation>
<source>Never</source>
<translation>しない</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>しない</translation>
<source>Scale How:</source>
<translation>倍率の大きさ:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>倍率の大きさ:</translation>
<source>Proportional</source>
<translation>プロポーショナル</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="66"/>
<source>Proportional</source>
<translation>プロポーショナル</translation>
<source>Non Proportional</source>
<translation>非プロポーショナル</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="67"/>
<source>Non Proportional</source>
<translation>非プロポーショナル</translation>
<source>Icon</source>
<translation>アイコン</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="90"/>
<source>Icon</source>
<translation>アイコン</translation>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="117"/>
<source>OK</source>
<translation>OK</translation>
<source>Cancel</source>
<translation>キャンセル</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="121"/>
<source>Cancel</source>
<translation>キャンセル</translation>
<source>Reset</source>
<translation>リセット</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="124"/>
<source>Reset</source>
<translation>リセット</translation>
<source>Caption overlays Icon</source>
<translation>アイコンにオーバーレイでキャプション</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation type="unfinished">アイコンにオーバーレイでキャプション</translation>
</message>
</context>
<context>
</context>
<context>
<name>CMSPrefs</name>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="31"/>
<source>&amp;Activate Color Management</source>
<translation>カラー管理を有効に(&amp;A)</translation>
<source>&amp;Activate Color Management</source>
<translation>カラーマネージメントを有効に(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="34"/>
<source>System Profiles</source>
<translation>システムプロファイル</translation>
<source>System Profiles</source>
<translation>システムプロファイル</translation>
</message>
<message>
<location filename="../cmsprefs.cpp" line="43"/>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">RGB画像(&amp;R):</translation>
<source>&amp;Monitor:</source>
<translation>モニタ(&amp;M):</translation>
</message>
<message>
<location filename="../cmsprefs.cpp" line="51"/>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">CMYK画像(&amp;C):</translation>
<source>P&amp;rinter:</source>
<translation>プリンタ(&amp;R):</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Solid Colors:</source>
<translation type="obsolete">無色(&amp;S):</translation>
<source>Rendering Intents</source>
<translation>レンダリングインテント</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="75"/>
<source>&amp;Monitor:</source>
<translation>モニタ(&amp;M):</translation>
<source>Perceptual</source>
<translation>知覚</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="83"/>
<source>P&amp;rinter:</source>
<translation>プリンタ(&amp;R):</translation>
<source>Relative Colorimetric</source>
<translation>相対的な色彩</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="89"/>
<source>Rendering Intents</source>
<translation>レンダリングインテント</translation>
<source>Saturation</source>
<translation>彩度</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="205"/>
<source>Perceptual</source>
<translation type="unfinished"></translation>
<source>Absolute Colorimetric</source>
<translation>絶対的な色彩</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="205"/>
<source>Relative Colorimetric</source>
<translation>相対的な色彩</translation>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>画面上でプリンタをシミュレートする(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="206"/>
<source>Saturation</source>
<translation>彩度</translation>
<source>Mark Colors out of &amp;Gamut</source>
<translation>範囲外の色をマークする</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="206"/>
<source>Absolute Colorimetric</source>
<translation>絶対的な色彩</translation>
<source>Use &amp;Blackpoint Compensation</source>
<translation>黒点補正を使用(&amp;B)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>M&amp;onitor:</source>
<translation type="obsolete">モニタ(&amp;O):</translation>
<source>Default color profile for imported CMYK images</source>
<translation>インポートしたCMYK画像のデフォルトのカラープロファイル</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Pr&amp;inter:</source>
<translation type="obsolete">プリンタ(&amp;I):</translation>
<source>Default color profile for imported RGB images</source>
<translation>インポートしたRGB画像のデフォルトのカラープロファイル</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="113"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>画面上でプリンタをシミュレートする(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="130"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>範囲外の色をマークする</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="134"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation>黒点補正を使用(&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="139"/>
<source>Default color profile for imported CMYK images</source>
<translation>インポートしたCMYK画像のデフォルトのカラープロファイル</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="140"/>
<source>Default color profile for imported RGB images</source>
<translation>インポートしたRGB画像のデフォルトのカラープロファイル</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Default color profile for solid colors on the page</source>
<comment>#, fuzzy</comment>
<translation type="obsolete">ページ上の無色のデフォルトのカラープロファイル</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="143"/>
<source>Color profile that you have generated or received from the manufacturer.
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="unfinished"></translation>
<translation>自分で作成したか、メーカから受け取ったカラープロファイルです。
このプロファイルはモニタ特有のものであり、一般的なプロファイル(例 sRGB)ではありません。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="144"/>
<source>Color profile for your printer model from the manufacturer.
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="unfinished"></translation>
<translation>メーカから出されている、プリンタモデル向けのカラープロファイルです。
このプロファイルはプリンタ特有のものであり、一般的なプロファイル(例 sRGB)ではありません。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="147"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
<source>Enable 'soft proofing' of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="unfinished"></translation>
<translation>選択されたプリンタプロファイルに基づいて、ドキュメントカラーがどのように印刷されるかという'soft-proofing'を有効にします。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="149"/>
<source>Method of showing colors on the screen which may not print properly.
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="150"/>
<source>Black Point Compensation is a method of improving contrast in photos.
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="unfinished"></translation>
<translation>黒点補正は写真のコントラストを改善する手法です。
ドキュメント中に写真がある場合は、これを有効にすることを推奨します。</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Default color profile for solid colors on the page</source>
<translation type="obsolete">ページ上の無色のデフォルトのカラープロファイル</translation>
<source>&amp;RGB Solid Colors:</source>
<translation>RGB単色(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="59"/>
<source>&amp;RGB Solid Colors:</source>
<translation type="unfinished"></translation>
<source>&amp;CMYK Solid Colors:</source>
<translation>CMYK単色(&amp;C):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="67"/>
<source>&amp;CMYK Solid Colors:</source>
<translation type="unfinished"></translation>
<source>Sol&amp;id Colors:</source>
<translation>単色(&amp;I):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="106"/>
<source>Sol&amp;id Colors:</source>
<translation type="unfinished"></translation>
<source>Convert all colors to printer space</source>
<translation>全ての色をプリンタ空間に変換する</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="121"/>
<source>Convert all colors to printer space</source>
<translation type="unfinished"></translation>
<source>Default color profile for solid RGB colors on the page</source>
<translation>ページのRGB単色の標準カラープロファイル</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="141"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="unfinished"></translation>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>ページのCMYK単色の標準カラープロファイル</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="142"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="145"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
<translation>単色の標準レンダリングインテントです。変更する理由が分からなければ、
相対的な色彩もしくは知覚を選択してください。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="146"/>
<source>Default rendering intent for images. Unless you know why to change it,
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
<translation>画像のレンダリングインテントです。変更する理由が分からなければ、
相対的な色彩もしくは知覚を選択してください。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="148"/>
<source>Simulate a full color managed environment :
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="unfinished"></translation>
<translation>フルカラーマネージメント環境のシミュレート:
rgbもしくはcmykの全ての色は、プリンタ色空間に変換されます。</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="43"/>
<source>&amp;RGB Images:</source>
<translation type="unfinished"></translation>
<source>&amp;RGB Images:</source>
<translation>RGB画像(&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="51"/>
<source>&amp;CMYK Images:</source>
<translation type="unfinished"></translation>
<source>&amp;CMYK Images:</source>
<translation>CMYK画像(&amp;C):</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="98"/>
<source>Images:</source>
<translation type="unfinished">画像:</translation>
<source>Images:</source>
<translation>画像:</translation>
</message>
</context>
<context>
</context>
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../scribus/cmykfw.cpp" line="91"/>
<source>Edit Color</source>
<translation>色を編集</translation>
<source>Edit Color</source>
<translation>色を編集</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="100"/>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="110"/>
<source>Color &amp;Model</source>
<translation>カラーモデル(&amp;M)</translation>
<source>Color &amp;Model</source>
<translation>カラーモデル(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="909"/>
<source>CMYK</source>
<translation>CMYK</translation>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="914"/>
<source>RGB</source>
<translation>RGB</translation>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="767"/>
<source>Web Safe RGB</source>
<translation>Webセーフ RGB</translation>
<source>Web Safe RGB</source>
<translation>Webセーフ RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="124"/>
<source>Is Spot Color</source>
<translation>スポットカラー</translation>
<source>Is Spot Color</source>
<translation>スポットカラー</translation>
</message>
<message>
<location filename="../cmykfw.cpp" line="128"/>
<source>Is Registration Color</source>
<translation type="obsolete">登録色</translation>
<source>New</source>
<translation>新規</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="140"/>
<source>New</source>
<translation>新規</translation>
<source>Old</source>
<translation>前の色</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="157"/>
<source>Old</source>
<translation>前の色</translation>
<source>HSV-Colormap</source>
<translation>HSVカラーマップ</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="195"/>
<source>HSV-Colormap</source>
<translation>HSVカラーマップ</translation>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="708"/>
<source>C:</source>
<translation>C:</translation>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="707"/>
<source> %</source>
<translation> %</translation>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="709"/>
<source>M:</source>
<translation>M:</translation>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="710"/>
<source>Y:</source>
<translation>Y:</translation>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="344"/>
<source>K:</source>
<translation>K:</translation>
<source>Dynamic Color Bars</source>
<translation>ダイナミックカラーバー</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="441"/>
<source>Dynamic Color Bars</source>
<translation>ダイナミックカラーバー</translation>
<source>Static Color Bars</source>
<translation>スタティックカラーバー</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="439"/>
<source>Static Color Bars</source>
<translation>スタティックカラーバー</translation>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="752"/>
<source>R:</source>
<translation>R:</translation>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="753"/>
<source>G:</source>
<translation>G:</translation>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="754"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>None</source>
<translation type="obsolete">なし</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="989"/>
<source>You cannot create a color named &quot;%1&quot;.
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>&quot;%1&quot;という名前の色を作成できません。
<translation>&quot;%1&quot;という名前の色を作成できません。
透明色の名前として予約されています。</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Name of the color is not unique</source>
<translation type="obsolete">その名前の色はすでに存在します</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="998"/>
<source>The name of the color already exists,
<source>The name of the color already exists,
please choose another one.</source>
<translation type="unfinished"></translation>
<translation>その色の名前は既に存在します、
他のものを選択してください。</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="387"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation type="unfinished"></translation>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="788"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished"></translation>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="982"/>
<source>You cannot create a color without a name
<source>You cannot create a color without a name
Please give it a name</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
</context>
<context>
<name>CStyleP</name>
<message>
<location filename="../smcstylew.ui" line="109"/>
<source>Colors</source>
<translation type="obsolete">色</translation>
</message>
</context>
<context>
</context>
<context>
<name>CWDialog</name>
<message>
<location filename="" line="136965632"/>
<source>Normal Vision</source>
<translation type="obsolete">正常視力</translation>
<source>Merging colors</source>
<translation>色をマージ中</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Protanopia (Red)</source>
<translation type="obsolete">赤色覚異常</translation>
<source>Error: </source>
<translation>エラー: </translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Deuteranopia (Green)</source>
<translation type="obsolete">緑色覚異常</translation>
<source>Color %1 exists already!</source>
<translation>色 %1 はすでに存在しています</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Tritanopia (Blue)</source>
<translation type="obsolete">青黄 色覚異常</translation>
<source>Color %1 appended.</source>
<translation>色 %1 が追加されました</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Full Color Blindness</source>
<translation type="obsolete">全色覚異常</translation>
<source>Now opening the color manager.</source>
<translation>カラーマネージメントを開いています</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation type="unfinished"></translation>
<source>Color Merging</source>
<translation>色をマージ中</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation type="unfinished">エラー: </translation>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>要求された色が見つかりませんでした。黒、グレーもしくは白を選択したものだと思われます。この色を処理しようがありません。</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation type="unfinished">色 %1 はすでに存在しています</translation>
<source>Color Wheel</source>
<translation>カラーホイール</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<source>Color %1 appended.</source>
<translation type="unfinished">色 %1 が追加されました</translation>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>べースカラーを取得するためにホイールをクリックしてください。カラーモデルは選択されたタブに依存します。</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<source>Now opening the color manager.</source>
<translation type="unfinished"></translation>
<source>Result Colors</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<source>Color Merging</source>
<translation type="unfinished"></translation>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation type="unfinished"></translation>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<source>Color Wheel</source>
<translation type="unfinished">カラーホイール</translation>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="47"/>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation type="unfinished"></translation>
<source>Colors of your chosen color scheme.</source>
<translation>選択したカラースキームの色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="54"/>
<source>Result Colors</source>
<translation type="unfinished"></translation>
<source>Color Scheme Method</source>
<translation>カラースキームメソッド</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="311"/>
<source>CMYK</source>
<translation type="unfinished">CMYK</translation>
<source>Angle:</source>
<translation>角度:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="532"/>
<source>RGB</source>
<translation type="unfinished">RGB</translation>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>選択された値と他のものの間の差です。詳細はドキュメントを参照してください。</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="718"/>
<source>HSV</source>
<translation type="unfinished">HSV</translation>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>カラースキームを作成するメソッドを選択してください。詳細な情報はドキュメントを参照してください。</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="108"/>
<source>Colors of your chosen color scheme.</source>
<translation type="unfinished"></translation>
<source>Merge created colors into the document colors</source>
<translation>作成された色をドキュメントカラーにマージする</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="118"/>
<source>Color Scheme Method</source>
<translation type="unfinished"></translation>
<source>&amp;Merge</source>
<translation>マージ(&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="144"/>
<source>Angle:</source>
<translation type="unfinished">角度:</translation>
<source>Alt+M</source>
<translation>Alt+M</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="154"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="unfinished"></translation>
<source>Replace created colors in the document colors</source>
<translation>ドキュメントカラー中で作成された色を置換する</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="169"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="unfinished"></translation>
<source>&amp;Replace</source>
<translation>置換(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="203"/>
<source>Merge created colors into the document colors</source>
<translation type="unfinished"></translation>
<source>Alt+R</source>
<translation>Alt+R</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="206"/>
<source>&amp;Merge</source>
<translation type="unfinished"></translation>
<source>Leave colors untouched</source>
<translation>色を触らないでおく</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="209"/>
<source>Alt+M</source>
<translation type="unfinished"></translation>
<source>&amp;Cancel</source>
<translation>キャンセル(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="216"/>
<source>Replace created colors in the document colors</source>
<translation type="unfinished"></translation>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="219"/>
<source>&amp;Replace</source>
<translation type="unfinished">置換(&amp;R)</translation>
<source>Preview:</source>
<translation>プレビュー:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="222"/>
<source>Alt+R</source>
<translation type="unfinished"></translation>
<source>Sample color scheme.</source>
<translation>サンプルカラースキーム</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="229"/>
<source>Leave colors untouched</source>
<translation type="unfinished"></translation>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>ここで一般的な色覚異常をシミュレートします。色覚異常の型を選択してください。</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="232"/>
<source>&amp;Cancel</source>
<translation type="unfinished">キャンセル(&amp;C)</translation>
<source>Vision Defect Type:</source>
<translation>視覚異常のタイプ:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="235"/>
<source>Alt+C</source>
<translation type="unfinished">Alt+C</translation>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="244"/>
<source>Preview:</source>
<translation type="unfinished"></translation>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="268"/>
<source>Sample color scheme.</source>
<translation type="unfinished"></translation>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="287"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="unfinished"></translation>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="294"/>
<source>Vision Defect Type:</source>
<translation type="unfinished"></translation>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="331"/>
<source>C:</source>
<translation type="unfinished">C:</translation>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="431"/>
<source> %</source>
<translation type="unfinished"> %</translation>
<source>HSV:</source>
<translation>HSV:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="361"/>
<source>M:</source>
<translation type="unfinished">M:</translation>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="391"/>
<source>Y:</source>
<translation type="unfinished">Y:</translation>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="421"/>
<source>K:</source>
<translation type="unfinished">K:</translation>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="827"/>
<source>RGB:</source>
<translation type="unfinished"></translation>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="674"/>
<source>HSV:</source>
<translation type="unfinished"></translation>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="560"/>
<source>R:</source>
<translation type="unfinished">R:</translation>
<source>S:</source>
<translation>S:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="587"/>
<source>G:</source>
<translation type="unfinished">G:</translation>
<source>V:</source>
<translation>V:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="614"/>
<source>B:</source>
<translation type="unfinished">B:</translation>
<source>Document</source>
<translation>ドキュメント</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="863"/>
<source>CMYK:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="746"/>
<source>H:</source>
<translation type="unfinished">H:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="773"/>
<source>S:</source>
<translation type="unfinished">S:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="800"/>
<source>V:</source>
<translation type="unfinished">V:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="907"/>
<source>Document</source>
<translation type="unfinished">ドキュメント</translation>
</message>
</context>
<context>
<name>CWDialogBase</name>
<message>
<location filename="" line="136965632"/>
<source>Color Wheel</source>
<translation type="obsolete">カラーホイール</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>CMYK</source>
<translation type="obsolete">CMYK</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>C:</source>
<translation type="obsolete">C:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>M:</source>
<translation type="obsolete">M:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Y:</source>
<translation type="obsolete">Y:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>K:</source>
<translation type="obsolete">K:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>RGB</source>
<translation type="obsolete">RGB</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>R:</source>
<translation type="obsolete">R:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>G:</source>
<translation type="obsolete">G:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>B:</source>
<translation type="obsolete">B:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Document</source>
<translation type="obsolete">ドキュメント</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Angle:</source>
<translation type="obsolete">角度:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Replace</source>
<translation type="obsolete">置換(&amp;R)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Cancel</source>
<translation type="obsolete">キャンセル(&amp;C)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source> %</source>
<translation type="obsolete"> %</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>HSV</source>
<translation type="obsolete">HSV</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>H:</source>
<translation type="obsolete">H:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>S:</source>
<translation type="obsolete">S:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>V:</source>
<translation type="obsolete">V:</translation>
</message>
</context>
<context>
</context>
<context>
<name>CharSelect</name>
<message>
<location filename="" line="136965632"/>
<source>Select Character:</source>
<translation type="obsolete">文字を選択:</translation>
<source>Font:</source>
<translation>フォント:</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="112"/>
<source>Font:</source>
<translation>フォント:</translation>
<source>Character Class:</source>
<translation>文字クラス:</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="135"/>
<source>Character Class:</source>
<translation>文字クラス:</translation>
<source>&amp;Insert</source>
<translation>挿入(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="214"/>
<source>&amp;Insert</source>
<translation>挿入(&amp;I)</translation>
<source>C&amp;lear</source>
<translation>クリア(&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="224"/>
<source>C&amp;lear</source>
<translation>クリア(&amp;L)</translation>
<source>Insert the characters at the cursor in the text</source>
<translation>テキスト中のカーソルの文字を挿入</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Close</source>
<translation type="obsolete">閉じる(&amp;C)</translation>
<source>Delete the current selection(s).</source>
<translation>現在選択しているものを削除</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="211"/>
<source>Insert the characters at the cursor in the text</source>
<translation>テキスト中のカーソルの文字を挿入</translation>
<source>Full Character Set</source>
<translation>全キャラクタセット</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="221"/>
<source>Delete the current selection(s).</source>
<translation>現在選択しているものを削除</translation>
<source>Basic Latin</source>
<translation>基本ラテン</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Close this dialog and return to text editing.</source>
<translation type="obsolete">このダイアログを閉じてテキスト編集に戻る</translation>
<source>Latin-1 Supplement</source>
<translation>ラテン-1補助</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="250"/>
<source>Full Character Set</source>
<translation>全キャラクタセット</translation>
<source>Latin Extended-A</source>
<translation>ラテン拡張A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="255"/>
<source>Basic Latin</source>
<translation>基本ラテン</translation>
<source>Latin Extended-B</source>
<translation>ラテン拡張B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="261"/>
<source>Latin-1 Supplement</source>
<translation>ラテン-1補助</translation>
<source>General Punctuation</source>
<translation>一般句読点</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="267"/>
<source>Latin Extended-A</source>
<translation>ラテン拡張A</translation>
<source>Super- and Subscripts</source>
<translation>上-下付き文字</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="273"/>
<source>Latin Extended-B</source>
<translation>ラテン拡張B</translation>
<source>Currency Symbols</source>
<translation>通貨シンボル</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="279"/>
<source>General Punctuation</source>
<translation>一般句読点</translation>
<source>Letterlike Symbols</source>
<translation>文字様記号</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="285"/>
<source>Super- and Subscripts</source>
<translation>上-下付き文字</translation>
<source>Number Forms</source>
<translation>数字の形</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="291"/>
<source>Currency Symbols</source>
<translation>通貨シンボル</translation>
<source>Arrows</source>
<translation>矢印</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="297"/>
<source>Letterlike Symbols</source>
<translation>文字様記号</translation>
<source>Mathematical Operators</source>
<translation>数学記号</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="303"/>
<source>Number Forms</source>
<translation>数字の形</translation>
<source>Box Drawing</source>
<translation>罫線素片</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="309"/>
<source>Arrows</source>
<translation>矢印</translation>
<source>Block Elements</source>
<translation>ブロック要素</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="315"/>
<source>Mathematical Operators</source>
<translation>数学記号</translation>
<source>Geometric Shapes</source>
<translation>幾何学模様</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="321"/>
<source>Box Drawing</source>
<translation>罫線素片</translation>
<source>Miscellaneous Symbols</source>
<translation>その他の記号</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="327"/>
<source>Block Elements</source>
<translation>ブロック要素</translation>
<source>Dingbats</source>
<translation>装飾記号</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="333"/>
<source>Geometric Shapes</source>
<translation>幾何学模様</translation>
<source>Small Form Variants</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="339"/>
<source>Miscellaneous Symbols</source>
<translation>その他の記号</translation>
<source>Ligatures</source>
<translation>リガチャ</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="345"/>
<source>Dingbats</source>
<translation>装飾記号</translation>
<source>Specials</source>
<translation>特別</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="351"/>
<source>Small Form Variants</source>
<translation type="unfinished"></translation>
<source>Greek</source>
<translation>ギリシャ</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="357"/>
<source>Ligatures</source>
<translation>リガチャ</translation>
<source>Greek Extended</source>
<translation>ギリシャ拡張</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="363"/>
<source>Specials</source>
<translation type="unfinished"></translation>
<source>Cyrillic</source>
<translation>キリル</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="369"/>
<source>Greek</source>
<translation>ギリシャ</translation>
<source>Cyrillic Supplement</source>
<translation>キリル補助</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="375"/>
<source>Greek Extended</source>
<translation>ギリシャ拡張</translation>
<source>Arabic</source>
<translation>アラビア</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="381"/>
<source>Cyrillic</source>
<translation>キリル</translation>
<source>Arabic Extended A</source>
<translation>アラビア拡張A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="387"/>
<source>Cyrillic Supplement</source>
<translation>キリル補助</translation>
<source>Arabic Extended B</source>
<translation>アラビア拡張B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="393"/>
<source>Arabic</source>
<translation>アラビア</translation>
<source>Hebrew</source>
<translation>ヘブライ</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="399"/>
<source>Arabic Extended A</source>
<translation>アラビア拡張A</translation>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="405"/>
<source>Arabic Extended B</source>
<translation>アラビア拡張B</translation>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation>Scribus文字パレット (*.ucp);;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="411"/>
<source>Hebrew</source>
<translation>ヘブライ</translation>
<source>Enhanced Palette</source>
<translation>拡張パレット</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="164"/>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished"></translation>
<source>Quick Palette</source>
<translation>クイックパレット</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="38"/>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation type="unfinished"></translation>
<source>Choose a filename to open</source>
<translation>開くファイル名を選択</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="88"/>
<source>Enhanced Palette</source>
<translation type="unfinished"></translation>
<source>Error</source>
<translation>エラー</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="19"/>
<source>Quick Palette</source>
<translation type="unfinished"></translation>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation>ファイル %1 の読み込み中にエラー - おそらくファイルが破損しています。</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="584"/>
<source>Choose a filename to open</source>
<translation type="unfinished"></translation>
<source>Choose a filename to save under</source>
<translation>保存するファイル名を選択</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="644"/>
<source>Error</source>
<translation type="unfinished">エラー</translation>
<source>Cannot write file %1</source>
<translation>ファイル %1 を書き込めません</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="611"/>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation type="unfinished"></translation>
<source>Character Palette</source>
<translation>文字パレット</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="625"/>
<source>Choose a filename to save under</source>
<translation type="unfinished"></translation>
<source>Empty the Palette?</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="645"/>
<source>Cannot write file %1</source>
<translation type="unfinished"></translation>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/charselect.ui" line="13"/>
<source>Character Palette</source>
<translation type="unfinished"></translation>
<source>Hide/Show Enhanced Palette</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../charselect.ui" line="56"/>
<source>&amp;Search</source>
<translation type="obsolete">検索(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="653"/>
<source>Empty the Palette?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="654"/>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="30"/>
<source>Hide/Show Enhanced Palette</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>CharStyleComboBox</name>
<message>
<location filename="../../scribus/spalette.cpp" line="118"/>
<source>No Style</source>
<translation type="unfinished">スタイルなし</translation>
<source>No Style</source>
<translation>スタイルなし</translation>
</message>
</context>
<context>
<name>CharTable</name>
<message>
<location filename="" line="136965632"/>
<source>Delete</source>
<translation type="obsolete">削除</translation>
</message>
</context>
<context>
</context>
<context>
<name>CharTableView</name>
<message>
<location filename="../../scribus/chartableview.cpp" line="22"/>
<source>Delete</source>
<translation type="unfinished">削除</translation>
<source>Delete</source>
<translation>削除</translation>
</message>
</context>
<context>
</context>
<context>
<name>CheckDocument</name>
<message>
<location filename="../../scribus/checkDocument.cpp" line="877"/>
<source>Glyphs missing</source>
<translation>グリフが見つかりません</translation>
<source>Glyphs missing</source>
<translation>グリフが見つかりません</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="878"/>
<source>Text overflow</source>
<translation>テキストがあふれています</translation>
<source>Text overflow</source>
<translation>テキストがあふれています</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="879"/>
<source>Object is not on a Page</source>
<translation>オブジェクトはページ上にありません</translation>
<source>Object is not on a Page</source>
<translation>オブジェクトはページ上にありません</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="880"/>
<source>Missing Image</source>
<translation>画像が見つかりません</translation>
<source>Missing Image</source>
<translation>画像が見つかりません</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Image has a DPI-Value less than %1 DPI</source>
<translation type="obsolete">画像のDPI値は %1 DPIより低いです</translation>
<source>Object has transparency</source>
<translation>オブジェクトは透明です</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="884"/>
<source>Object has transparency</source>
<translation>オブジェクトは透明です</translation>
<source>Object is a PDF Annotation or Field</source>
<translation>オブジェクトはPDF注釈もしくはフィールドです</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="885"/>
<source>Object is a PDF Annotation or Field</source>
<translation>オブジェクトはPDF注釈もしくはフィールドです</translation>
<source>Object is a placed PDF</source>
<translation>オブジェクトは配置されたPDFです</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="886"/>
<source>Object is a placed PDF</source>
<translation type="unfinished"></translation>
<source>Document</source>
<translation>ドキュメント</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="250"/>
<source>Document</source>
<translation>ドキュメント</translation>
<source>No Problems found</source>
<translation>問題は見つかりませんでした</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="254"/>
<source>No Problems found</source>
<translation>問題は見つかりませんでした</translation>
<source>Page </source>
<translation>ページ </translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="656"/>
<source>Page </source>
<translation>ページ </translation>
<source>Free Objects</source>
<translation>フリーオブジェクト</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="837"/>
<source>Free Objects</source>
<translation>フリーオブジェクト</translation>
<source>Problems found</source>
<translation>問題が見つかりました</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="843"/>
<source>Problems found</source>
<translation>問題が見つかりました</translation>
<source>Preflight Verifier</source>
<translation>プリフライト検証</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="863"/>
<source>Preflight Verifier</source>
<translation>プリフライト検証</translation>
<source>Items</source>
<translation>アイテム</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="865"/>
<source>Items</source>
<translation type="unfinished"></translation>
<source>Problems</source>
<translation>問題</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="866"/>
<source>Problems</source>
<translation>問題</translation>
<source>Current Profile:</source>
<translation>現在のプロファイル:</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="869"/>
<source>Current Profile:</source>
<translation>現在のプロファイル:</translation>
<source>&amp;Ignore Errors</source>
<translation>エラーを無視(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="870"/>
<source>&amp;Ignore Errors</source>
<translation>エラーを無視(&amp;I)</translation>
<source>Check again</source>
<translation>再度チェック</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="871"/>
<source>Check again</source>
<translation type="unfinished"></translation>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation>画像の解像度が %1 DPI以下です。現在 %2 x %3 DPIです。</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="882"/>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation>画像の解像度が %1 DPI以上です。現在 %2 x %3 DPIです。</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="883"/>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
<source>Image is GIF</source>
<translation>GIF画像です</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="887"/>
<source>Image is GIF</source>
<translation type="unfinished"></translation>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="255"/>
<source>OK</source>
<translation type="unfinished">OK</translation>
<source>Transparency used</source>
<translation>透明度が使用されています</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="276"/>
<source>Transparency used</source>
<translation type="unfinished"></translation>
<source>Blendmode used</source>
<translation>合成モードが使用されています</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="279"/>
<source>Blendmode used</source>
<translation type="unfinished"></translation>
<source>Layer &quot;%1&quot;</source>
<translation>レイヤー &quot;%1&quot;</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="286"/>
<source>Layer &quot;%1&quot;</source>
<translation type="unfinished"></translation>
<source>Annotation uses a non TrueType font</source>
<translation>注釈でTrueTypeフォントでないものが使用されています</translation>
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="888"/>
<source>Annotation uses a non TrueType font</source>
<translation type="unfinished"></translation>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="873"/>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation type="unfinished"></translation>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="874"/>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation type="unfinished"></translation>
<source>Rerun the document scan to check corrections you may have made</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="875"/>
<source>Rerun the document scan to check corrections you may have made</source>
<translation type="unfinished"></translation>
<source>Empty Image Frame</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/checkDocument.cpp" line="881"/>
<source>Empty Image Frame</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ChooseStyles</name>
<message>
<location filename="../editformats.cpp" line="95"/>
<source>Choose Styles</source>
<translation type="obsolete">スタイルを選択</translation>
</message>
<message>
<location filename="../editformats.cpp" line="100"/>
<source>Available Styles</source>
<translation type="obsolete">利用可能なスタイル</translation>
</message>
</context>
<context>
</context>
<context>
<name>CollectForOutput</name>
<message>
<location filename="../../scribus/collect4output.cpp" line="52"/>
<source>Choose a Directory</source>
<translation>ディレクトリを選択</translation>
<source>Choose a Directory</source>
<translation>ディレクトリを選択</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="68"/>
<source>Collecting...</source>
<translation type="unfinished"></translation>
<source>Collecting...</source>
<translation>まとめ中...</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="87"/>
<source>Cannot collect the file:
<source>Cannot collect the file:
%1</source>
<translation type="unfinished"></translation>
<translation>ファイルをまとめることができません:
%1</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Warning</source>
<translation type="obsolete">警告</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="73"/>
<source>Cannot collect all files for output for file:
<source>Cannot collect all files for output for file:
%1</source>
<translation type="unfinished"></translation>
<translation>全てのファイルを出力ファイルにまとめることができません:
%1</translation>
</message>
</context>
<context>
<name>ColorListBox</name>
<message>
<location filename="" line="136965632"/>
<source>None</source>
<translation type="obsolete">なし</translation>
</message>
</context>
<context>
</context>
<context>
<name>ColorManager</name>
<message>
<location filename="../../scribus/colorm.cpp" line="54"/>
<source>Colors</source>
<translation>色</translation>
<source>Colors</source>
<translation>色</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="80"/>
<source>&amp;Import</source>
<translation>インポート(&amp;I)</translation>
<source>&amp;Import</source>
<translation>インポート(&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="82"/>
<source>&amp;New</source>
<translation>新規(&amp;N)</translation>
<source>&amp;New</source>
<translation>新規(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="84"/>
<source>&amp;Edit</source>
<translation>編集(&amp;E)</translation>
<source>&amp;Edit</source>
<translation>編集(&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="88"/>
<source>D&amp;uplicate</source>
<translation>複製(&amp;U)</translation>
<source>D&amp;uplicate</source>
<translation>複製(&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="91"/>
<source>&amp;Delete</source>
<translation>削除(&amp;D)</translation>
<source>&amp;Delete</source>
<translation>削除(&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="96"/>
<source>&amp;Remove Unused</source>
<translation>使用しないものを削除(&amp;R)</translation>
<source>&amp;Remove Unused</source>
<translation>使用しないものを削除(&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="103"/>
<source>Color Sets</source>
<translation>カラーセット</translation>
<source>Color Sets</source>
<translation>カラーセット</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="109"/>
<source>Current Color Set:</source>
<translation>現在のカラーセット:</translation>
<source>Current Color Set:</source>
<translation>現在のカラーセット:</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="140"/>
<source>&amp;Save Color Set</source>
<translation>カラーセットを保存(&amp;S)</translation>
<source>&amp;Save Color Set</source>
<translation>カラーセットを保存(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="159"/>
<source>Choose a color set to load</source>
<translation>読み込むカラーセットを選択</translation>
<source>Choose a color set to load</source>
<translation>読み込むカラーセットを選択</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="160"/>
<source>Save the current color set</source>
<translation>現在のカラーセットを保存</translation>
<source>Save the current color set</source>
<translation>現在のカラーセットを保存</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="165"/>
<source>Remove unused colors from current document&apos;s color set</source>
<translation>現在のドキュメントのカラーセットから使用されていない色を削除します</translation>
<source>Remove unused colors from current document's color set</source>
<translation>現在のドキュメントのカラーセットから使用されていない色を削除します</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="167"/>
<source>Import colors to the current set from an existing document</source>
<translation type="unfinished"></translation>
<source>Import colors to the current set from an existing document</source>
<translation>既存のドキュメントから現在のセットに色をインポート</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="168"/>
<source>Create a new color within the current set</source>
<translation>現在のセット中に新しい色を作成します</translation>
<source>Create a new color within the current set</source>
<translation>現在のセット中に新しい色を作成します</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="169"/>
<source>Edit the currently selected color</source>
<translation>現在選択されている色を編集</translation>
<source>Edit the currently selected color</source>
<translation>現在選択されている色を編集</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="170"/>
<source>Make a copy of the currently selected color</source>
<translation>現在選択されている色のコピーを作成</translation>
<source>Make a copy of the currently selected color</source>
<translation>現在選択されている色のコピーを作成</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="171"/>
<source>Delete the currently selected color</source>
<translation>現在選択されている色を削除</translation>
<source>Delete the currently selected color</source>
<translation>現在選択されている色を削除</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="172"/>
<source>Make the current colorset the default color set</source>
<translation>現在の色をデフォルトのカラーセットに設定する</translation>
<source>Make the current colorset the default color set</source>
<translation>現在の色をデフォルトのカラーセットに設定する</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="190"/>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="190"/>
<source>Choose a Name</source>
<translation>名前を選択</translation>
<source>Choose a Name</source>
<translation>名前を選択</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Open</source>
<translation type="obsolete">開く</translation>
<source>Copy of %1</source>
<translation>%1のコピー</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation type="obsolete">ドキュメント (*.sla *.sla.gz *.scd *.scd.gz);;全てのファイル (*)</translation>
<source>New Color</source>
<translation>新しい色</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation type="obsolete">ドキュメント (*.sla *.scd);;全てのファイル (*)</translation>
<source>Information</source>
<translation>情報</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="362"/>
<source>Copy of %1</source>
<translation>%1のコピー</translation>
<source>Import</source>
<translation>インポート</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="373"/>
<source>New Color</source>
<translation>新しい色</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="330"/>
<source>Information</source>
<translation type="unfinished">情報</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="321"/>
<source>Import</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="330"/>
<source>The file %1 does not contain colors which can be imported.
<source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import.
Not all files have DSC conformant comments where the color descriptions are located.
This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
<translation type="unfinished"></translation>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="173"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
<translation type="unfinished"></translation>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="320"/>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation type="unfinished"></translation>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>ColorWheel</name>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
<source>Monochromatic</source>
<translation type="unfinished"></translation>
<source>Monochromatic</source>
<translation>単色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
<source>Analogous</source>
<translation type="unfinished"></translation>
<source>Analogous</source>
<translation>類似色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="224"/>
<source>Complementary</source>
<translation type="unfinished"></translation>
<source>Complementary</source>
<translation>補色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
<source>Split Complementary</source>
<translation type="unfinished"></translation>
<source>Split Complementary</source>
<translation>分裂補色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
<source>Triadic</source>
<translation type="unfinished"></translation>
<source>Triadic</source>
<translation>トライアド配色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
<source>Tetradic (Double Complementary)</source>
<translation type="unfinished"></translation>
<source>Tetradic (Double Complementary)</source>
<translation>テトラード配色 (二重補色)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
<source>Base Color</source>
<translation>基調色</translation>
<source>Base Color</source>
<translation>基調色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="206"/>
<source>Monochromatic Light</source>
<translation type="unfinished"></translation>
<source>Monochromatic Light</source>
<translation>明るい単色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="209"/>
<source>Monochromatic Dark</source>
<translation type="unfinished"></translation>
<source>Monochromatic Dark</source>
<translation>暗い単色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="216"/>
<source>1st. Analogous</source>
<translation type="unfinished"></translation>
<source>1st. Analogous</source>
<translation>第1類似色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="217"/>
<source>2nd. Analogous</source>
<translation type="unfinished"></translation>
<source>2nd. Analogous</source>
<translation>第2類似色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="231"/>
<source>1st. Split</source>
<translation type="unfinished"></translation>
<source>1st. Split</source>
<translation>第1分裂色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="232"/>
<source>2nd. Split</source>
<translation type="unfinished"></translation>
<source>2nd. Split</source>
<translation>第2分裂色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="233"/>
<source>3rd. Split</source>
<translation type="unfinished"></translation>
<source>3rd. Split</source>
<translation>第3分裂色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="234"/>
<source>4th. Split</source>
<translation type="unfinished"></translation>
<source>4th. Split</source>
<translation>第4分裂色</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="241"/>
<source>1st. Triadic</source>
<translation type="unfinished"></translation>
<source>1st. Triadic</source>
<translation>第1トライアド</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="242"/>
<source>2nd. Triadic</source>
<translation type="unfinished"></translation>
<source>2nd. Triadic</source>
<translation>第2トライアド</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="249"/>
<source>1st. Tetradic (base opposite)</source>
<translation type="unfinished"></translation>
<source>1st. Tetradic (base opposite)</source>
<translation>第1テトラード(反対基調)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="250"/>
<source>2nd. Tetradic (angle)</source>
<translation type="unfinished"></translation>
<source>2nd. Tetradic (angle)</source>
<translation>第2テトラード(角度)</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="251"/>
<source>3rd. Tetradic (angle opposite)</source>
<translation type="unfinished"></translation>
<source>3rd. Tetradic (angle opposite)</source>
<translation>第3テトラード(反対角度)</translation>
</message>
</context>
<context>
<name>ColorWheelDialog</name>
<message>
<location filename="" line="136965632"/>
<source>Cr&amp;eate color...</source>
<translation type="obsolete">色を作成(&amp;E)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>C&amp;olor Components...</source>
<translation type="obsolete">色成分(&amp;O)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Import existing color...</source>
<translation type="obsolete">すでにある色をインポート(&amp;I)...</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Merge colors</source>
<translation type="obsolete">色をマージ(&amp;M)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Replace colors</source>
<translation type="obsolete">色を置換(&amp;R)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>E&amp;xit</source>
<translation type="obsolete">終了(&amp;X)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>C&amp;olor</source>
<translation type="obsolete">色(&amp;O)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Normal Vision</source>
<translation type="obsolete">正常視力</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Protanopia (Red)</source>
<translation type="obsolete">赤色覚異常</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Deuteranopia (Green)</source>
<translation type="obsolete">緑色覚異常</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Tritanopia (Blue)</source>
<translation type="obsolete">青黄 色覚異常</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Full Color Blindness</source>
<translation type="obsolete">全色覚異常</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Vision Defect:</source>
<translation type="obsolete">視覚異常:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Color Wheel</source>
<translation type="obsolete">カラーホイール</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Color</source>
<translation type="obsolete">色</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Name</source>
<translation type="obsolete">名前</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>C</source>
<translation type="obsolete">C</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>M</source>
<translation type="obsolete">M</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Y</source>
<translation type="obsolete">Y</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>K</source>
<translation type="obsolete">K</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Select Method:</source>
<translation type="obsolete">方法を選択:</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Angle (0 - 90 degrees):</source>
<translation type="obsolete">角度(0 - 90度):</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Merge Colors</source>
<translation type="obsolete">色をマージ(&amp;M)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>&amp;Replace Colors</source>
<translation type="obsolete">色を置換(&amp;R)</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Sample color scheme</source>
<translation type="obsolete">サンプル色スキーム</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Colors of your chosen color scheme</source>
<translation type="obsolete">選択した色スキームの色</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Error: </source>
<translation type="obsolete">エラー: </translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Color %1 exists already!</source>
<translation type="obsolete">色 %1 はすでに存在しています</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Color %1 appended.</source>
<translation type="obsolete">色 %1 が追加されました</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>New Color</source>
<translation type="obsolete">新しい色</translation>
</message>
</context>
<context>
</context>
<context>
<name>ColorWheelPlugin</name>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="47"/>
<source>&amp;Color Wheel...</source>
<translation>カラーホイール(&amp;C)...</translation>
<source>&amp;Color Wheel...</source>
<translation>カラーホイール(&amp;C)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="64"/>
<source>Color setting helper</source>
<translation>色設定ヘルパー</translation>
<source>Color setting helper</source>
<translation>色設定ヘルパー</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
<source>Color selector with color theory included.</source>
<translation type="unfinished"></translation>
<source>Color selector with color theory included.</source>
<translation>カラー理論を含んだカラーセレクタ</translation>
</message>
</context>
<context>
</context>
<context>
<name>CommonStrings</name>
<message>
<location filename="../../scribus/commonstrings.cpp" line="244"/>
<source>&amp;Apply</source>
<translation>適用(&amp;A)</translation>
<source>&amp;Apply</source>
<translation>適用(&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="247"/>
<source>&amp;Cancel</source>
<translation>キャンセル(&amp;C)</translation>
<source>&amp;Cancel</source>
<translation>キャンセル(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="250"/>
<source>None</source>
<translation type="unfinished">なし</translation>
<source>None</source>
<translation>なし</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="254"/>
<source>&amp;OK</source>
<translation>OK(&amp;O)</translation>
<source>&amp;OK</source>
<translation>OK(&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="257"/>
<source>&amp;Save</source>
<translation>保存(&amp;S)</translation>
<source>&amp;Save</source>
<translation>保存(&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="260"/>
<source>Warning</source>
<translation>警告</translation>
<source>Warning</source>
<translation>警告</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="251"/>
<source>None</source>
<comment>color name</comment>
<translation type="unfinished">なし</translation>
<source>None</source>
<comment>color name</comment>
<translation>なし</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="285"/>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation type="unfinished">カスタム</translation>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation>カスタム</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="291"/>
<source>Single Page</source>
<translation type="unfinished">単一ページ</translation>
<source>Single Page</source>
<translation>単ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="292"/>
<source>Double Sided</source>
<translation type="unfinished"></translation>
<source>Double Sided</source>
<translation>両面</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="293"/>
<source>3-Fold</source>
<translation type="unfinished">三つ折り</translation>
<source>3-Fold</source>
<translation>三つ折り</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="294"/>
<source>4-Fold</source>
<translation type="unfinished">四つ折り</translation>
<source>4-Fold</source>
<translation>四つ折り</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Left Page</source>
<translation type="obsolete">左ページ</translation>
<source>Monday</source>
<translation>月曜日</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Middle</source>
<translation type="obsolete">中央ページ</translation>
<source>Tuesday</source>
<translation>火曜日</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Middle Left</source>
<translation type="obsolete">中央左ページ</translation>
<source>Wednesday</source>
<translation>水曜日</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Middle Right</source>
<translation type="obsolete">中央右ページ</translation>
<source>Thursday</source>
<translation>木曜日</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Right Page</source>
<translation type="obsolete">右ページ</translation>
<source>Friday</source>
<translation>金曜日</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="330"/>
<source>Monday</source>
<translation type="unfinished"></translation>
<source>Saturday</source>
<translation>土曜日</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="331"/>
<source>Tuesday</source>
<translation type="unfinished"></translation>
<source>Sunday</source>
<translation>日曜日</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="332"/>
<source>Wednesday</source>
<translation type="unfinished"></translation>
<source>January</source>
<translation>1月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="333"/>
<source>Thursday</source>
<translation type="unfinished"></translation>
<source>February</source>
<translation>2月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="334"/>
<source>Friday</source>
<translation type="unfinished"></translation>
<source>March</source>
<translation>3月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="335"/>
<source>Saturday</source>
<translation type="unfinished"></translation>
<source>April</source>
<translation>4月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="336"/>
<source>Sunday</source>
<translation type="unfinished"></translation>
<source>May</source>
<translation>5月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="337"/>
<source>January</source>
<translation type="unfinished">January</translation>
<source>June</source>
<translation>6月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="338"/>
<source>February</source>
<translation type="unfinished"></translation>
<source>July</source>
<translation>6月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="339"/>
<source>March</source>
<translation type="unfinished"></translation>
<source>August</source>
<translation>8月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="340"/>
<source>April</source>
<translation type="unfinished"></translation>
<source>September</source>
<translation>9月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="341"/>
<source>May</source>
<translation type="unfinished"></translation>
<source>October</source>
<translation>10月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="342"/>
<source>June</source>
<translation type="unfinished"></translation>
<source>November</source>
<translation>11月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="343"/>
<source>July</source>
<translation type="unfinished"></translation>
<source>December</source>
<translation>12月</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="344"/>
<source>August</source>
<translation type="unfinished"></translation>
<source>Yes</source>
<translation>はい</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="345"/>
<source>September</source>
<translation type="unfinished"></translation>
<source>No</source>
<translation>いいえ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="346"/>
<source>October</source>
<translation type="unfinished"></translation>
<source>&amp;Yes</source>
<translation>はい(&amp;Y)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="347"/>
<source>November</source>
<translation type="unfinished"></translation>
<source>&amp;No</source>
<translation>いいえ(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="348"/>
<source>December</source>
<translation type="unfinished"></translation>
<source>Left Page</source>
<comment>Left page location</comment>
<translation>左ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="262"/>
<source>Yes</source>
<translation type="unfinished">はい</translation>
<source>Middle</source>
<comment>Middle page location</comment>
<translation>中央ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="263"/>
<source>No</source>
<translation type="unfinished">いいえ</translation>
<source>Middle Left</source>
<comment>Middle Left page location</comment>
<translation>中央左ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="264"/>
<source>&amp;Yes</source>
<translation type="unfinished">はい(&amp;Y)</translation>
<source>Middle Right</source>
<comment>Middle Right page location</comment>
<translation>中央右ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="265"/>
<source>&amp;No</source>
<translation type="unfinished">いいえ(&amp;N)</translation>
<source>Right Page</source>
<comment>Right page location</comment>
<translation>右ページ</translation>
</message>
<message>
<location filename="" line="136965632"/>
<source>Normal</source>
<translation type="obsolete">標準</translation>
<source>Normal</source>
<comment>Default single master page</comment>
<translation>標準</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="301"/>
<source>Left Page</source>
<comment>Left page location</comment>
<translation type="unfinished">左ページ</translation>
<source>Normal Left</source>
<comment>Default left master page</comment>
<translation>標準 左</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="302"/>
<source>Middle</source>
<comment>Middle page location</comment>
<translation type="unfinished">中央ページ</translation>
<source>Normal Middle</source>
<comment>Default middle master page</comment>
<translation>標準 中央ページ</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="303"/>
<source>Middle Left</source>
<comment>Middle Left page location</comment>
<translation type="unfinished">中央左ページ</translation>
<source>Normal Right</source>
<comment>Default right master page</comment>
<translation>標準 右</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="304"/>
<source>Middle Right</source>
<comment>Middle Right page location</comment>
<translation type="unfinished">中央右ページ</translation>
<source>Normal Vision</source>
<comment>Color Blindness - Normal Vision</comment>
<translation>正常視力</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="305"/>
<source>Right Page</source>
<comment>Right page location</comment>
<translation type="unfinished">右ページ</translation>
<source>Protanopia (Red)</source>
<comment>Color Blindness - Red Color Blind</comment>
<translation>赤色覚異常</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="308"/>
<source>Normal</source>
<comment>Default single master page</comment>
<translation type="unfinished">標準</translation>
<source>Deuteranopia (Green)</source>
<comment>Color Blindness - Greed Color Blind</comment>
<translation>緑色覚異常</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="310"/>
<source>Normal Left</source>
<comment>Default left master page</comment>
<translation type="unfinished"></translation>
<source>Tritanopia (Blue)</source>
<comment>Color Blindness - Blue Color Blind</comment>
<translation>青黄色覚異常</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="312"/>
<source>Normal Middle</source>
<comment>Default middle master page</comment>
<translation type="unfinished"></translation>
<source>Full Color Blindness</source>
<comment>Color Blindness - Full Color Blindness</comment>
<translation>全色覚異常</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="314"/>
<source>Normal Right</source>
<comment>Default right master page</comment>
<translation type="unfinished"></translation>
<source>Custom: </source>
<comment>Custom Tab Fill Option</comment>
<translation>カスタム: </translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="356"/>
<source>Normal Vision</source>
<comment>Color Blindness - Normal Vision</comment>
<translation type="unfinished">正常視力</translation>
<source>Solid Line</source>
<translation>実線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="357"/>
<source>Protanopia (Red)</source>
<comment>Color Blindness - Red Color Blind</comment>
<translation type="unfinished">赤色覚異常</translation>
<source>Dashed Line</source>
<translation>破線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="358"/>
<source>Deuteranopia (Green)</source>
<comment>Color Blindness - Greed Color Blind</comment>
<translation type="unfinished">緑色覚異常</translation>
<source>Dotted Line</source>
<translation>点線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="359"/>
<source>Tritanopia (Blue)</source>
<comment>Color Blindness - Blue Color Blind</comment>
<translation type="unfinished">青黄 色覚異常</translation>
<source>Dash Dot Line</source>
<translation>破点線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="360"/>
<source>Full Color Blindness</source>
<comment>Color Blindness - Full Color Blindness</comment>
<translation type="unfinished">全色覚異常</translation>
<source>Dash Dot Dot Line</source>
<translation>破点点線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="362"/>
<source>Custom: </source>
<comment>Custom Tab Fill Option</comment>
<translation type="unfinished">カスタム: </translation>
<source>None</source>
<comment>Optical Margin Setting</comment>
<translation>なし</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="316"/>
<source>Solid Line</source>
<translation type="unfinished">実線</translation>
<source>Left Protruding</source>
<comment>Optical Margin Setting</comment>
<translation>左に突出</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="317"/>
<source>Dashed Line</source>
<translation type="unfinished">破線</translation>
<source>Right Protruding</source>
<comment>Optical Margin Setting</comment>
<translation>右に突出</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="318"/>
<source>Dotted Line</source>
<translation type="unfinished">点線</translation>
<source>Left Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="319"/>
<source>Dash Dot Line</source>
<translation type="unfinished">破点線</translation>
<source>Right Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="320"/>
<source>Dash Dot Dot Line</source>
<translation type="unfinished">破点点線</translation>
<source>Default</source>
<comment>Optical Margin Setting</comment>
<translation>デフォルト</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="364"/>
<source>None</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished">なし</translation>
<source>Min. Word Tracking</source>
<translation>最小のワードトラッキング</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="365"/>
<source>Left Protruding</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished"></translation>
<source>Max. Word Tracking</source>
<translation>最大のワードトラッキング</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="366"/>
<source>Right Protruding</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished"></translation>
<source>Min. Glyph Extension</source>
<translation>最小のグリフ拡張</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="367"/>
<source>Left Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished"></translation>
<source>Max. Glyph Extension</source>
<translation>最大のグリフ拡張</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="368"/>
<source>Right Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished"></translation>
<source>RGB</source>
<comment>Colorspace</comment>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="369"/>
<source>Default</source>
<comment>Optical Margin Setting</comment>
<translation type="unfinished"></translation>
<source>CMYK</source>
<comment>Colorspace</comment>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="372"/>
<source>Min. Word Tracking</source>
<translation type="unfinished"></translation>
<source>Grayscale</source>
<comment>Colorspace</comment>
<translation>グレースケール</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="373"/>
<source>Max. Word Tracking</source>
<translation type="unfinished"></translation>
<source>Duotone</source>
<comment>Colorspace</comment>
<translation>2色網版</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="376"/>
<source>Min. Glyph Extension</source>
<translation type="unfinished"></translation>
<source>Unknown</source>
<comment>Colorspace (Unknown)</comment>
<translation>不明</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="377"/>
<source>Max. Glyph Extension</source>
<translation type="unfinished"></translation>
<source>PostScript</source>
<translation>PostScript</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="350"/>
<source>RGB</source>
<comment>Colorspace</comment>
<translation type="unfinished">RGB</translation>
<source>Text Frame</source>
<translation>テキストフレーム</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="351"/>
<source>CMYK</source>
<comment>Colorspace</comment>
<translation type="unfinished">CMYK</translation>
<source>Image Frame</source>
<translation>画像フレーム</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="352"/>
<source>Grayscale</source>
<comment>Colorspace</comment>
<translation type="unfinished">グレースケール</translation>
<source>Line</source>
<translation>線</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="353"/>
<source>Duotone</source>
<comment>Colorspace</comment>
<translation type="unfinished"></translation>
<source>Polygon</source>
<translation>多角形</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="354"/>
<source>Unknown</source>
<comment>Colorspace (Unknown)</comment>
<translation type="unfinished">不明</translation>
<source>Polyline</source>
<translation>ポリライン</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="381"/>
<source>PostScript</source>
<translation type="unfinished">PostScript</translation>
<source>Text on a Path</source>
<translation>パス上のテキスト</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="267"/>
<source>Text Frame</source>
<translation type="unfinished">テキストフレーム</translation>
<source>Multiple</source>
<comment>Multiple frame types</comment>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="268"/>
<source>Image Frame</source>
<translation type="unfinished"></translation>
<source>PDF Push Button</source>
<translation>PDFプッシュボタン</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="269"/>
<source>Line</source>
<translation type="unfinished">線</translation>
<source>PDF Text Field</source>
<translation>PDFテキストフィールド</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="270"/>
<source>Polygon</source>
<translation type="unfinished">多角形</translation>
<source>PDF Check Box</source>
<translation>PDFチェックボックス</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="271"/>
<source>Polyline</source>
<translation type="unfinished">ポリライン</translation>
<source>PDF Combo Box</source>
<translation>PDFコンボボックス</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="272"/>
<source>Text on a Path</source>
<translation type="unfinished">パス上のテキスト</translation>
<source>PDF List Box</source>
<translation>PDFリストボックス</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="274"/>
<source>Multiple</source>
<comment>Multiple frame types</comment>
<translation type="unfinished"></translation>
<source>PDF Text Annotation</source>
<translation>PDFテキスト注釈</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="275"/>
<source>PDF Push Button</source>
<translation type="unfinished"></translation>
<source>PDF Link Annotation</source>
<translation>PDFリンク注釈</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="276"/>
<source>PDF Text Field</source>
<translation type="unfinished"></translation>
<source>PostScript Level 1</source>
<translation>PostScript レベル1</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="277"/>
<source>PDF Check Box</source>
<translation type="unfinished"></translation>
<source>PostScript Level 2</source>
<translation>PostScript レベル2</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="278"/>
<source>PDF Combo Box</source>
<translation type="unfinished"></translation>
<source>PostScript Level 3</source>
<translation>PostScript レベル3</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="279"/>
<source>PDF List Box</source>
<translation type="unfinished"></translation>
<source>Windows GDI</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="280"/>
<source>PDF Text Annotation</source>
<translation type="unfinished"></translation>
<source>Render Frame</source>
<translation>フレームを描画</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="281"/>
<source>PDF Link Annotation</source>
<translation type="unfinished"></translation>
<source>Default Paragraph Style</source>
<translation>標準段落スタイル</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="388"/>
<source>PostScript Level 1</source>
<translation type="unfinished">PostScript レベル1</translation>
<source>Default Character Style</source>
<translation>標準文字スタイル</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="390"/>
<source>PostScript Level 2</source>
<translation type="unfinished">PostScript レベル2</translation>
<source>Default Line Style</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="392"/>
<source>PostScript Level 3</source>
<translation type="unfinished">PostScript レベル3</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="394"/>
<source>Windows GDI</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="273"/>
<source>Render Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="325"/>
<source>Default Paragraph Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="326"/>
<source>Default Character Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="327"/>
<source>Default Line Style</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
</context>
<context>
<name>ContextMenu</name>
<message>
<location filename="../../scribus/contextmenu.cpp" line="198"/>
<source>Preview Settings</source>
<translation type="unfinished"></translation>
<source>Preview Settings</source>
<translation>プレビュー設定</translation>
</message>
<message>
<location filename="../../scribus/contextmenu.cpp" line="408"/>
<source>Paste File...</source>
<translation type="unfinished"></translation>
<source>Paste File...</source>
<translation type="unfinished" />
</message>
<message>
<location filename="../../scribus/contextmenu.cpp" line="441"/>
<source>Delete Page</source>
<translation type="unfinished"></translation>
<source>Delete Page</source>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>CopyPageToMasterPageBase</name>
<message>
<location filename="../../scribus/ui/copypagetomasterpage.ui" line="16"/>
<source>Convert Page to Master Page</source>
<translation type="unfinished">ページをマスターページに変換</translation>
<source>Convert Page to Master Page</source>
<translation>ページをマスターページに変換</translation>
</message>
<message>
<location filename="../../scribus/ui/copypagetomasterpage.ui" line="24"/>
<source>Name:</source>
<translation type="unfinished">名前:</translation>
<source>Name:</source>
<translation>名前:</translation>
</message>
<message>
<location filename="../../scribus/ui/copypagetomasterpage.ui" line="39"/>
<source>Copy Applied Master Page Items</source>
<translation type="unfinished"></translation>
<source>Copy Applied Master Page Items</source>
<translation type="unfinished" />
</message>
</context>
<context>
</context>
<context>
<name>CopyPageToMasterPageDialog</name>
<message>
<location filename="../../scribus/ui/copypagetomasterpagedialog.cpp" line="18"/>
<source>New Master Page %1</source>
<translation type="unfinished">新規マスターページ %1</translation>
<source>New Master Page %1</source>
<translation>新規マスターページ %1</translation>
</message>
</context>
<context>
</context>
<context>
<name>Cpalette</name>
<message>
<location filename="" line="136965632"/>
<source>None</source>
<translation type="obsolete">なし</translation>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="980"/>
<source> pt</source>
<translation> pt</translation>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="981"/>
<source> %</source>
<translation> %</translation>