Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 6768 → Rev 6769

/branches/Version13x/Scribus/scribus/po/scribus.en_US.ts
0,0 → 1,19290
<!DOCTYPE TS><TS>
<context>
<name></name>
<message>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>importSVG(&quot;string&quot;)
 
The &quot;string&quot; must be a valid filename for a SVG image. The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius isexpressed in points. If &quot;name&quot; is not given the currentlyselected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)
 
Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
 
See QObject::children() in the Qt docs for more information.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getChild(object, childname, ofclass=None, recursive=True)
 
Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positve values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If printable is set to
false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerOutlined&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerFlow&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerBlendmode&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLayerTransparency&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>About</name>
<message>
<source>About Scribus %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 %2 %3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%3-%2-%1 %4 %5</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Using Ghostscript version %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Ghostscript version available</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Build ID:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;About</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Development Team:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Contributions from:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Windows&amp;#174; Port:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Official Documentation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Other Documentation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tango Project Icons:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A&amp;uthors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Official Translations and Translators:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Previous Translation Contributors:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Translations</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Homepage</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Online Reference</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wiki</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bugs and Feature Requests</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mailing List</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Online</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Updates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check for &amp;Updates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<source>Filename:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Version:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enabled:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Release Date:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Author(s):</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copyright:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>License:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AboutPluginsBase</name>
<message>
<source>Scribus: About Plug-ins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Open...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Re&amp;vert to Saved</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Collect for O&amp;utput...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get Text...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get Text 2...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Append &amp;Text...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get Image...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save &amp;Text...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as &amp;EPS...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as P&amp;DF...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document &amp;Setup...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>P&amp;references...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Print...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Previe&amp;w</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Quit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Redo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Item Action Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Paste</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Paste (&amp;Absolute)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select &amp;All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Deselect All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Search/Replace...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit Image...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;olors...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Patterns...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>S&amp;tyles...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Paragraph Styles...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Line Styles...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Master Pages...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;JavaScripts...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Other...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Center</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Block</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Forced</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;%1 %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Underline</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Underline &amp;Words</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Strike Through</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;All Caps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Small &amp;Caps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Su&amp;perscript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Su&amp;bscript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>S&amp;hadow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Image Effects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Tabulators...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Multiple Duplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Group</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Ungroup</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is &amp;Locked</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Si&amp;ze is Locked</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Printing Enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Flip Horizontally</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Flip Vertically</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lower to &amp;Bottom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Raise to &amp;Top</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Lower</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Raise</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send to S&amp;crapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send to Patterns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Attributes...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>More Info...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>I&amp;mage Visible</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Update Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Adjust Frame to Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Extended Image Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Low Resolution</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Normal Resolution</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Full Resolution</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is PDF &amp;Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is PDF A&amp;nnotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Annotation P&amp;roperties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Field P&amp;roperties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit Shape...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Attach Text to Path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Detach Text from Path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Combine Polygons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Split &amp;Polygons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Bezier Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Text Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Frame...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Glyph...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Insert...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Im&amp;port...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Move...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Apply Master Page...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Convert to Master Page...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Manage &amp;Guides...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Manage Page Properties...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Fit in window</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;50%</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;75%</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;100%</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;200%</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Thumbnails</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show Layer Indicators</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Grid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show G&amp;uides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show Text Frame Columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Baseline Grid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;Text Chain</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show Control Characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show Rulers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rulers relative to Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sn&amp;ap to Grid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sna&amp;p to Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Layers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Arrange Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Bookmarks</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Action &amp;History</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preflight &amp;Verifier</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Align and Distribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>P&amp;DF Tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select Item</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;able</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Freehand Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotate Item</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom in or out</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom in</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom out</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit Contents of Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit Text...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Link Text Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unlink Text Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Eye Dropper</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy Item Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit the text with the Story Editor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Text Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Image Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Bezier Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Freehand Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert PDF Push Button</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert PDF Text Field</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert PDF Check Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert PDF Combo Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert PDF List Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Text Annotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Link Annotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Manage Pictures</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Hyphenate Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dehyphenate Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Generate Table Of Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cascade</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Tile</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;About Scribus</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;About Plug-ins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>About &amp;Qt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toolti&amp;ps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus &amp;Manual...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toggle Palettes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toggle Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Smart &amp;Hyphen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Non Breaking Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Non Breaking &amp;Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page &amp;Number</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Frame Break</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Column Break</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copyright</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Registered Trademark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Trademark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Solidus</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bullet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Middle Dot</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Em Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>En Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Figure Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Quotation Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apostrophe</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Straight Double</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Reversed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Reversed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Left Guillemet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Right Guillemet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Left Guillemet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Right Guillemet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Low Single Comma</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Low Double Comma</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CJK Single Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CJK Single Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CJK Double Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CJK Double Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>En Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Em Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thin Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thick Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mid Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hair Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Smart Hyphen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Non Breaking Dash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Non Breaking Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Page Number</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ff</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>fi</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>fl</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ffi</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ffl</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ft</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>st</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AlignDistributeBase</name>
<message>
<source>Align and Distribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Relative To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<source>Align and Distribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Relative to:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First Selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Last Selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Guide</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align right sides of objects to left side of anchor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align left sides of objects to right side of anchor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align bottoms</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align right sides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align tops of objects to bottom of anchor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Center on vertical axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align left sides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Center on horizontal axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align bottoms of objects to top of anchor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align tops</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make horizontal gaps between objects equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make horizontal gaps between objects equal to the value specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute right sides equidistantly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute bottoms equidistantly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute centers equidistantly horizontally</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make vertical gaps between objects equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make vertical gaps between objects equal to the value specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute left sides equidistantly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute centers equidistantly vertically</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute tops equidistantly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make horizontal gaps between objects and sides of page equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make vertical gaps between objects and the top and bottom of page margins equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make horizontal gaps between objects and sides of page margins equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make vertical gaps between objects and the top and bottom of page equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distribute the items with the distance specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None Selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y: %1%2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X: %1%2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<source>Align Text Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align Text Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align Text Center</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align Text Justified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align Text Forced Justified</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<source>Field Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Button</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text Field</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Combo Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tooltip:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font for use with PDF 1.3:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Border</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thin</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wide</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Style:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Solid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dashed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Underline</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Beveled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Inset</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Other</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Read Only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Required</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do Not Export Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Visibility:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Visible</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hidden</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Print</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No View</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Appearance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text for Button Down</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text for Roll Over</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Icons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use Icons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Remove</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pressed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Roll Over</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Icon Placement...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Highlight</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>highlight</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invert</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Outlined</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Push</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multi-Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Limit of</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do Not Scroll</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do Not Spell Check</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check Style:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cross</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Diamond</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Circle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Star</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Square</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default is Checked</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Editable</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>action</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>JavaScript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Go To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit Form</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset Form</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import Data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Event:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mouse Up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mouse Down</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mouse Enter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mouse Exit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>On Focus</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>On Blur</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Script:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit to URL:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit Data as HTML</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import Data from:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Destination</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>To File:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Action</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Field is formatted as:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plain</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Percentage</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Date</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Time</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number Format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Decimals:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use Currency Symbol</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Prepend Currency Symbol</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Formatting</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Percent Format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Date Format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Time Format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom Scripts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Format:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Keystroke:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value is not validated</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value must be greater than or equal to:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>and less or equal to:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom validate script:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Validate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value is not calculated</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value is the</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>product</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>average</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>minimum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>maximum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>of the following fields:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pick...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom calculation script:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Calculate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flag is ignored for PDF 1.3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter a comma separated list of fields here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Example:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selection Change</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<source>Annotation Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Link</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>External Link</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>External Web-Link</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Destination</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;X-Pos</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF-Documents (*.pdf);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<source>Apply Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Master Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Current &amp;page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+P</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Even pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+E</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>O&amp;dd pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;All pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Within range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+W</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>to</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+O</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ArrowChooser</name>
<message>
<source>None</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<source>&amp;Barcode Generator...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<source>12 or 13 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>8 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>11 or 12 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>7 or 8 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>5 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2 digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>For ISBN-10 the data should contain 9 or 10 <byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>digits separated appropriately by dash characters.
For ISBN-13 the data should contain 12 or 13 <byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>digits separated appropriately by dash characters.
If the last digit is not given then the ISBN <byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/><byte value="x9"/>checkdigit is calculated automatically.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of digits and capital letters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variable number of hexadecimal characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error opening file: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Barcode incomplete</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<source>Barcode Creator</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Barcode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Co&amp;de:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select one of the available barcode type here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The numeric representation of the code itself. See the help message below</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset the barcode samples</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Include text in barcode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+I</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If checked, there will be numbers in the barcode too</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Guard whitespace</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+G</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Draw arrows to be sure of space next the code</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>I&amp;nclude checksum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+N</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate and include a checksum in barcode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Incl&amp;ude checksum digit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+U</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Include the checksum digit in the barcode text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Background</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+B</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background color - under the code lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of the lines in barcode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+T</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of the text and numbers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hints and help is shown here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview of the result. 72dpi sample.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<source>Main</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copied Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a Scrapbook Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scrapbook (*.scs)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a scrapbook file to import</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rename</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Entry</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create a new scrapbook page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Load an existing scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save the selected scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close the selected scrapbook</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BookMView</name>
<message>
<source>Move Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bookmarks</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<source>Bookmarks</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<source>Icon Placement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layout:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Icon only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption below Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption above Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption right to Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption left to Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Caption overlays Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scale:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Always</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>When Icon is too small</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>When Icon is too big</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Never</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scale How:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Proportional</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Non Proportional</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Icon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<source>&amp;Activate Color Management</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>System Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;RGB Pictures:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;CMYK Pictures:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;RGB Solid Colors:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;CMYK Solid Colors:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Monitor:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>P&amp;rinter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rendering Intents</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pictures:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sol&amp;id Colors:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Convert all colors to printer space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default color profile for imported CMYK images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default color profile for imported RGB images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Perceptual</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relative Colorimetric</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Absolute Colorimetric</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<source>Edit Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color &amp;Model</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CMYK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RGB</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Web Safe RGB</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Spot Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Registration Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Old</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>HSV-Colormap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>M:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>K:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dynamic Color Bars</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Static Color Bars</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>R:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>G:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>B:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The name of the color already exists,
please choose another one.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CStylePBase</name>
<message>
<source>Form1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parent</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<source>Normal Vision</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Protanopia (Red)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Deuteranopia (Green)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tritanopia (Blue)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Full Color Blindness</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Merging colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color %1 exists already!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color %1 appended.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Now opening the color manager.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Merging</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CWDialogBase</name>
<message>
<source>Color Wheel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CMYK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>M:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>K:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RGB:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RGB</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>R:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>G:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>B:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CMYK:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Scheme Method:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vision Defect Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample color scheme.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colors of your chosen color scheme.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Merge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+M</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Replace</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+R</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<source>Select Character:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Character Class:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Insert Code:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Insert</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert the characters at the cursor in the text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete the current selection(s).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close this dialog and return to text editing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type in a four digit unicode value directly here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Full Character Set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Basic Latin</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Latin-1 Supplement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Latin Extended-A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Latin Extended-B</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>General Punctuation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Super- and Subscripts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Currency Symbols</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Letterlike Symbols</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number Forms</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arrows</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mathematical Operators</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Box Drawing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Block Elements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Geometric Shapes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Miscellaneous Symbols</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dingbats</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Small Form Variants</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ligatures</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specials</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Greek</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Greek Extended</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cyrillic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cyrillic Supplement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arabic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arabic Extended A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arabic Extended B</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hebrew</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CheckDocument</name>
<message>
<source>Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Problems found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transparency used</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blendmode used</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layer &quot;%1&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Free Objects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Problems found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Ignore Errors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preflight Verifier</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Problems</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Current Profile:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Glyphs missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text overflow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Object is not on a Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Missing Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Object has transparency</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Object is a PDF Annotation or Field</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Object is a placed PDF</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image is GIF</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ChooseStyles</name>
<message>
<source>Choose Styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available Styles</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CollectForOutput</name>
<message>
<source>Choose a Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Collecting...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot collect all files for output for file:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot collect the file:
%1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ColorManager</name>
<message>
<source>Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Import</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Remove Unused</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Sets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Current Color Set:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save Color Set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a color set to load</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save the current color set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Remove unused colors from current document&apos;s color set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import colors to the current set from an existing document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create a new color within the current set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit the currently selected color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make a copy of the currently selected color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete the currently selected color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make the current colorset the default color set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.ps *.ai);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.scd);;Other Files (*.eps *.ps *.ai);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy of %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ColorWheel</name>
<message>
<source>Monochromatic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Analogous</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Complementary</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Split Complementary</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Triadic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tetradic (Double Complementary)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Base Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monochromatic Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monochromatic Dark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1st. Analogous</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2nd. Analogous</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1st. Split</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2nd. Split</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>3rd. Split</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>4th. Split</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1st. Triadic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2nd. Triadic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1st. Tetradic (base opposite)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2nd. Tetradic (angle)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>3rd. Tetradic (angle opposite)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ColorWheelPlugin</name>
<message>
<source>&amp;Color Wheel...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color setting helper</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color selector with color theory included.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CommonStrings</name>
<message>
<source>&amp;Apply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>color name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Warning</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Yes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Yes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;No</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Single Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Sided</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>3-Fold</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>4-Fold</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Left Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Middle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Middle Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Middle Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Right Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal Middle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tuesday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wednesday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thursday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Friday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sunday</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>January</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>February</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>March</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>April</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>May</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>June</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>July</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>August</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>September</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>October</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>November</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>December</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Cpalette</name>
<message>
<source>Transparency Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Offsets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scaling</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X-Scale:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y-Scale:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shade:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opacity:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Vector</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Horizontal Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Diagonal Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cross Diagonal Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Radial Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Free linear Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Free radial Gradient</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blend Mode:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Darken</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lighten</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multiply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overlay</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hard Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Soft Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difference</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exclusion</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Dodge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Burn</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Luminosity</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit Line Color Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit Fill Color Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation of color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal or gradient fill method</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set the transparency for the color selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CreateRangeBase</name>
<message>
<source>Create Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of Pages in Document:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Doc Page Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Basic Range Selection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add a Range of Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Consecutive Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>From:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Comma Separated List</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Even Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Odd Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add To Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Range of Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move &amp;Up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+U</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move &amp;Down</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>De&amp;lete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Advanced Reordering</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Group Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample Page Order:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Order</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+O</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CsvDialog</name>
<message>
<source>CSV Importer Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Field delimiter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(TAB)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value delimiter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>delimiter</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>First row is a header</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CupsOptions</name>
<message>
<source>Printer Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Even Pages only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Odd Pages only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Orientation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portrait</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Landscape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>N-Up Printing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page per Sheet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pages per Sheet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Option</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CurveWidget</name>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve Files (*.scu);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot write the file:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Inverts the curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resets the curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Switches between linear and cubic interpolation of the curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Loads a curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saves this curve</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CustomFDialog</name>
<message>
<source>&amp;Compress File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Include Fonts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Include ICC Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Encoding:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Moves to your Document Directory.
This can be set in the Preferences.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DeferredTask</name>
<message>
<source>Cancelled by user</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DelColor</name>
<message>
<source>Delete Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete Color:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Replace With:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DelPages</name>
<message>
<source>Delete Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete From:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>to:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DelStyle</name>
<message>
<source>Delete Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete Style:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Replace With:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Style</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocIm</name>
<message>
<source>Importing failed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Importing Word document failed
%1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocInfos</name>
<message>
<source>Document Information</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Title:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Author:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Keywords:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Descri&amp;ption:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>P&amp;ublisher:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Contributors:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dat&amp;e:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;ype:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>F&amp;ormat:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Identi&amp;fier:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Source:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Language:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Relation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Co&amp;verage:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ri&amp;ghts:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documen&amp;t</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Further &amp;Information</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A person or organisation responsible for making the document available</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A person or organisation responsible for making contributions to the content of the document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocSections</name>
<message>
<source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete the currently selected section.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1, 2, 3, ...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>i, ii, iii, ...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>I, II, III, ...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>a, b, c, ...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A, B, C, ...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Number Out Of Bounds</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocSectionsBase</name>
<message>
<source>Document Sections</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shown</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>From</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocumentItemAttributes</name>
<message>
<source>None</source>
<comment>relationship</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relates To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Parent Of</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Child Of</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>auto add</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>None</source>
<comment>types</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Boolean</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Integer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Real Number</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>String</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DocumentItemAttributesBase</name>
<message>
<source>Document Item Attributes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relationship</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relationship To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto Add To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+L</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Druck</name>
<message>
<source>Setup Printer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Destination</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Options...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;File:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A&amp;lternative Printer Command</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Co&amp;mmand:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print &amp;All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Current Pa&amp;ge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print &amp;Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>N&amp;umber of Copies:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Separations</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print in Color if Available</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print in Grayscale</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cyan</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Magenta</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Yellow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Black</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PostScript Level 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PostScript Level 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PostScript Level 3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror Page(s) Horizontal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror Page(s) Vertical</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set Media Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Clip to Page Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply Under Color Removal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Convert Spot Colors to Process Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Force Overprint Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply ICC Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Advanced Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Print</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not show objects outside the margins on the printed page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sets the PostScript Level.
Setting to Level 1 or 2 can create huge files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enables global Overprint Mode for this document, overrides object settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allows you to embed ICC profiles in the print stream when color management is enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to retrieve printer settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PostScript Files (*.ps);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>EPSPlug</name>
<message>
<source>Importing PostScript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Analyzing PostScript:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Group%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Importing File:
%1
failed!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fatal Error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generating Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Converting of %1 images failed!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>EditStyle</name>
<message>
<source>Edit Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Character</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distances</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fixed Linespacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Automatic Linespacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align to Baseline Grid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Drop Caps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Lines:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from Text:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tabulators and Indentation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview of the Paragraph Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select for easier reading of light coloured text styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name of your paragraph style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font of selected text or object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of text fill</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of text stroke</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Determines the overall height, in line numbers, of the Drop Caps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Determines the gap between the DropCaps and the Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spacing above the paragraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spacing below the paragraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Manual Tracking</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Offset to baseline of characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line Spacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Click to select the line spacing mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toggles sample text of this paragraph style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name of the style is not unique</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Editor</name>
<message>
<source>Editor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Open...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save and Exit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Exit without Saving</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Redo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Paste</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Get Field Names</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>JavaScripts (*.js);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>EffectsDialog</name>
<message>
<source>Image Effects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shade:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Brightness:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Contrast:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Radius:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Posterize:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color 1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color 2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color 3:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color 4:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available Effects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blur</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Brightness</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colorize</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Duotone</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tritone</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Quadtone</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Contrast</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Grayscale</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invert</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Posterize</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sharpen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&gt;&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;&lt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Effects in use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ExportBitmap</name>
<message>
<source>File exists. Overwrite?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>exists already. Overwrite?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ExportForm</name>
<message>
<source>Choose a Export Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export as Image(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Export to Directory:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image &amp;Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Quality:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Resolution:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> dpi</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;All pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Range</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image size in Pixels</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export a range of pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export all pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export only the current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The quality of your images - 100% is the best, 1% the lowest quality</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available export formats</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change the output directory</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ExtImageProps</name>
<message>
<source>Extended Image Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Darken</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lighten</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Luminosity</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multiply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dissolve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overlay</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hard Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Soft Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difference</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exclusion</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Dodge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Burn</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blend Mode:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opacity:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Don&apos;t use any Path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Paths</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FDialogPreview</name>
<message>
<source>Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resolution:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>DPI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RGB</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CMYK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Grayscale</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Duotone</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colorspace:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Title:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Title</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Author:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus Document</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FileLoader</name>
<message>
<source>Some fonts used by this document have been substituted:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> was replaced by: </source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FontPrefs</name>
<message>
<source>Available Fonts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Substitutions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Additional Paths</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Name</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use Font</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Embed in PostScript</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Subset</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to Font File</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Available Fonts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Replacement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font &amp;Substitutions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A&amp;dd...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Remove</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit-&gt;Settings to change the font search path.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Additional &amp;Paths</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose a Directory</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FontPreview</name>
<message>
<source>Woven silk pyjamas exchanged for blue quartz</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Append selected font into Style, Font menu</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Leave preview</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start searching</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size of the selected font</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample will be shown after key release</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>User</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>System</source>
<comment>font preview</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FontPreviewBase</name>
<message>
<source>Fonts Preview</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Quick Search:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Doc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Subset</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Access</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Font Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample text to display</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Se&amp;t</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+T</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset the text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Append</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FontPreviewPlugin</name>
<message>
<source>&amp;Font Preview...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Preview dialog</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sorting, searching and browsing available fonts.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>FontReplaceDialog</name>
<message>
<source>Font Substitution</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Original Font</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Substitution Font</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make these substitutions permanent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancels these font substitutions and stops loading the document.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit &gt; Preferences &gt; Fonts.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If you select OK, then save, these substitutions are made permanent in the document.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>GradientEditor</name>
<message>
<source>Add, change or remove color stops here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Position:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>GuideManager</name>
<message>
<source>Edit Guide</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter a position:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Guide</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>GuideManagerBase</name>
<message>
<source>Manage Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Single</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Horizontals</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Guide</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D&amp;elete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+E</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Verticals</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A&amp;dd</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>De&amp;lete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Lock Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Appl&amp;y to All Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Column/Row</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Number:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>U&amp;se Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Refer To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+P</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>M&amp;argins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>S&amp;election</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nu&amp;mber:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use &amp;Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+G</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Misc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete &amp;Page Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete all guides from the current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete &amp;Document guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete all guides from the current document</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>HelpBrowser</name>
<message>
<source>Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Link</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relevance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Se&amp;arch</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>De&amp;lete All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Book&amp;marks</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Print...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>E&amp;xit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Find...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Find &amp;Next</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Find &amp;Previous</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D&amp;elete All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Bookmarks</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus Online Help</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Searching is case unsensitive</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sorry, no manual available! Please see: http://docs.scribus.net for updated docs
and www.scribus.net for downloads.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Find</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Search Term:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Bookmark</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Bookmark&apos;s Title:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>HyAsk</name>
<message>
<source>Possible Hyphenation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Accept</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Skip</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>HySettings</name>
<message>
<source>&amp;Hyphenation Suggestions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hyphenate Text Automatically &amp;During Typing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Language:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Smallest Word:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Consecutive Hyphenations &amp;Allowed:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enables automatic hyphenation of your text while typing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of the smallest word to be hyphenated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Maximum number of Hyphenations following each other.
A value of 0 means unlimited hyphenations.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ImageInfoDialog</name>
<message>
<source>Image Info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>General Info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Date / Time:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Has Embedded Profile:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Profile Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Has Embedded Paths:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Has Layers:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>EXIF Info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Artist:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Comment:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>User Comment:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Camera Model:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Camera Manufacturer:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copyright:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scanner Model:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scanner Manufacturer:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ImportPSPlugin</name>
<message>
<source>Import &amp;EPS/PS...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Imports EPS Files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Imports most EPS files into the current document,
converting their vector data into Scribus objects.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PostScript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>InsPage</name>
<message>
<source>Insert Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Insert</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>before Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>after Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>at End</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Master Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Master Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portrait</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Landscape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Objects with their Page</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>InsertAFrame</name>
<message>
<source>&lt;b&gt;Insert a text frame&lt;/b&gt;&lt;br/&gt;A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.&lt;br/&gt;Your text may be edited and formatted on the page directly or in the simple Story Editor.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;b&gt;Insert an image frame&lt;/b&gt;&lt;br/&gt;An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>InsertAFrameBase</name>
<message>
<source>Insert A Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;ype</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Text Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+T</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+I</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;able</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Location</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Placement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Current Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selecting this will place the frame only on the current page.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Range of Pages:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selecting this will place frame on the selected range. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Position of Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Top Left of Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selecting this puts the frame on the top left with postion 0,0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Top Left of Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selecting this places the frame in the upper left of the page margins defined in your doc setup.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom Position:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set the dimensions wished below in the X: Y: dialog below.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Same as the Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Same as the Page Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Source Image:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Select File...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There are no options for this type of frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Source Document:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Columns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Link Created Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>InsertTable</name>
<message>
<source>Insert Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of rows:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of columns:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>JavaDocs</name>
<message>
<source>Edit JavaScripts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Adds a new Script, predefines a function with the same name. If you want to use this script as an &quot;Open Action&quot; script be sure not to change the name of the function.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New Script:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Script</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you really want to delete this script?</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LayerPalette</name>
<message>
<source>Opacity:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you want to delete all objects on this layer too?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blend Mode:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Darken</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lighten</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multiply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overlay</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hard Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Soft Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difference</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exclusion</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Dodge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Burn</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Luminosity</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add a new layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Duplicates the current layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Raise layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lower layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make Layer Visible - Uncheck to hide the layer from the display </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Layer - Uncheck to disable printing. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lock or Unlock Layer - Unchecked is unlocked </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name of the Layer - Double clicking on the name of a layer enabled editing</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LineFormate</name>
<message>
<source>Edit Line Styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Import</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy of %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you really want to delete this style?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LineStyleWBase</name>
<message>
<source>LineStyleWBase</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line Width:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LineStyleWidget</name>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flat Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Square Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Miter Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bevel Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Join</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LoadSavePlugin</name>
<message>
<source>All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LoremManager</name>
<message>
<source>Select Lorem Ipsum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Author:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get More:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>XML File:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lorem Ipsum</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Paragraphs:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+O</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MarginDialog</name>
<message>
<source>Manage Page Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portrait</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Landscape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Objects with their Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Margin Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Other Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Master Page:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MarginWidget</name>
<message>
<source>Preset Layouts:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Bottom:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Top:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Right:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Left:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply settings to:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Document Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Master Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply the margin changes to all existing pages in the document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply the margin changes to all existing master pages in the document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Printer Margins...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import the margins for the selected page size from the available printers.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between the top margin guide and the edge of the page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between the bottom margin guide and the edge of the page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between the left margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between the right margin guide and the edge of the page. If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Inside:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>O&amp;utside:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MasterPagesPalette</name>
<message>
<source>Edit Master Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Duplicate the selected master page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete the selected master page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add a new master page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import master pages from another document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you really want to delete this master page?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy #%1 of </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New MasterPage</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Master Page %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to Rename Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The Normal page is not allowed to be renamed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rename Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Name:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Mdup</name>
<message>
<source>Multiple Duplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Number of Copies:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Horizontal Shift:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Vertical Shift:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Measurements</name>
<message>
<source>pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distances</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>DX:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>DY:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MergeDoc</name>
<message>
<source>Import Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import Page(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;From Document:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Chan&amp;ge...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Import Page(s):</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Import Master Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> from 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create Page(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Before Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>After Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>At End</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Import</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> from %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MissingFont</name>
<message>
<source>Missing Font</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The Font %1 is not installed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>instead</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ModeToolBar</name>
<message>
<source>Tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Properties...</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MovePages</name>
<message>
<source>Move Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Page(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>To:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of copies:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Before Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>After Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>At End</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Page(s):</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Mpalette</name>
<message>
<source>Transparency Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fixed Linespacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Automatic Linespacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align to Baseline Grid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;X1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X&amp;2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y&amp;1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Y2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;X-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Column width</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name &quot;%1&quot; isn&apos;t unique.&lt;br/&gt;Please choose another.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X, Y, &amp;Z</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Group</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Geometry</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Rotation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Basepoint:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Level</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shape:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Edit Shape...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opacity:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blend Mode:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Darken</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lighten</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multiply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overlay</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hard Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Soft Light</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difference</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exclusion</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Dodge</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Burn</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>R&amp;ound
Corners:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance of Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colu&amp;mns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>To&amp;p:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Bottom:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Left:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Right:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;abulators...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path Text Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start Offset:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from Curve:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fill Rule</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Even-Odd</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Non Zero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text &amp;Flow Around Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Disabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use Frame &amp;Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use &amp;Bounding Box</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Use Contour Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>St&amp;yle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Free Scaling</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Actual X-DPI:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Actual Y-DPI:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X-Sc&amp;ale:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y-Scal&amp;e:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scale &amp;To Frame Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>P&amp;roportional</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Image Effects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Extended Image Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Input Profile:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rendering Intent:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Perceptual</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relative Colorimetric</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Absolute Colorimetric</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Left Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>End Points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Basepoint:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T&amp;ype of Line:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start Arrow:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>End Arrow:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line &amp;Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ed&amp;ges:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Miter Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bevel Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flat Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Square Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Endings:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cell Lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line at Top</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line at the Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line at the Right </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line at Bottom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overprinting</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Knockout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overprint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name of selected object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Horizontal position of current basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical position of current basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotation of object at current basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point from which measurements or rotation angles are referenced</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select top left for basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select top right for basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select bottom left for basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select bottom right for basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select center for basepoint</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Group the selected objects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Destroys the selected group</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flip Horizontal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flip Vertical</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move one level up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move one level down</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move to front</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move to back</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Indicates the level the object is on, 0 means the object is at the bottom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lock or unlock the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lock or unlock the size of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable or disable printing of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Disable text flow from lower frames around object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use the frame shape for text flow of text frames below the object.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use the bounding box, which is always rectangular, instead of the frame&apos;s shape for text flow of text frames below the object. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use a second line originally based on the frame&apos;s shape for text flow of text frames below the object. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font of selected text or object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Offset to baseline of characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scaling width of characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scaling height of characters</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation of color of text stroke</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saturation of color of text fill</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Right to Left Writing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Manual Tracking</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line Spacing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Click to select the line spacing mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Style of current paragraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change settings for left or end points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern of line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thickness of line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type of line joins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type of line end</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line style of current object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose the shape of frame...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit shape of the frame...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set radius of corner rounding</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of columns in text frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Switches between Gap or Column width</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance of text from top of frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance of text from bottom of frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance of text from left of frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance of text from right of frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit tab settings of text frame...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow the image to be a different size to the frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Horizontal offset of image within frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical offset of image within frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resize the image horizontally</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resize the image vertically</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Keep the X and Y scaling the same</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Keep the aspect ratio</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make the image fit within the size of the frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use image proportions rather than those of the frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Source profile of the image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rendering intent for the image</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MultiLine</name>
<message>
<source>Edit Style</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flat Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Square Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Cap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Miter Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bevel Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Round Join</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> pt </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Solid Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dashed Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dotted Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dash Dot Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dash Dot Dot Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name &quot;%1&quot; isn&apos;t unique.&lt;br/&gt;Please choose another.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MultiProgressDialogBase</name>
<message>
<source>Progress</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overall Progress:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MultipleDuplicate</name>
<message>
<source>&amp;Horizontal Shift:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Vertical Shift:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Horizontal Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Vertical Gap:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MultipleDuplicateBase</name>
<message>
<source>Multiple Duplicate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;By Number of Copies</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Number of Copies:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Shift Created Items By</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create &amp;Gap Between Items Of</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+G</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Horizontal Shift:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Vertical Shift:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>By &amp;Rows &amp;&amp; Columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Horizontal Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of Rows:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of Columns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MyPlugin</name>
<message>
<source>My &amp;Plugin</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MyPluginImpl</name>
<message>
<source>Scribus - My Plugin</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The plugin worked!</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>NewDoc</name>
<message>
<source>Custom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open &amp;Existing Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open Recent &amp;Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not show this dialog again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document page size, either a standard size or a custom size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Orientation of the document&apos;s pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width of the document&apos;s pages, editable if you have chosen a custom page size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height of the document&apos;s pages, editable if you have chosen a custom page size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Initial number of pages of the document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default unit of measurement for document editing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create text frames automatically when new pages are added</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of columns to create in automatically created text frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between automatically created columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portrait</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Landscape</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>N&amp;umber of Pages:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Default Unit:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Margin Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Automatic Text Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Gap:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Colu&amp;mns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>NewFromTemplatePlugin</name>
<message>
<source>New &amp;from Template...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Load documents with predefined layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start a document from a template made by other users or yourself (f.e. for documents you have a constant style).</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>NodePalette</name>
<message>
<source>Nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Absolute Coordinates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;X-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit &amp;Contour Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Reset Contour Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;End Editing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Control Points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add Nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete Nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Control Points Independently</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move Control Points Symmetrical</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset Control Points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset this Control Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open a Polygon or Cuts a Bezier Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close this Bezier Curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror the Path Horizontally</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror the Path Vertically</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shear the Path Horizontally to the Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shear the Path Horizontally to the Left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shear the Path Vertically Up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shear the Path Vertically Down</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotate the Path Counter-Clockwise</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotate the Path Clockwise</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shrink the Size of the Path by shown %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enlarge the Size of the Path by shown %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reduce the Size of the Path by the shown value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enlarge the Size of the Path by the shown value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of Rotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>% to Enlarge or Shrink By</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value to Enlarge or Shrink By</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Activate Contour Line Editing Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reset the Contour Line to the Original Shape of the Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>When checked use coordinates relative to the page, otherwise coordinates are relative to the Object.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OODPlug</name>
<message>
<source>This document does not seem to be an OpenOffice Draw file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OODrawImportPlugin</name>
<message>
<source>Import &amp;OpenOffice.org Draw...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Imports OpenOffice.org Draw Files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OpenDocument 1.0 Draw</source>
<comment>Import/export format name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>OpenOffice.org 1.x Draw</source>
<comment>Import/export format name</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OdtDialog</name>
<message>
<source>OpenDocument Importer Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Overwrite Paragraph Styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enabling this will overwrite existing styles in the current Scribus document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Merge Paragraph Styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document&apos;s styles are named differently.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use document name as a prefix for paragraph styles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Prepend the document name to the paragraph style name in Scribus.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not ask again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Make these settings the default and do not prompt again when importing an OASIS OpenDocument.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OldScribusFormat</name>
<message>
<source>Scribus Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus 1.2.x Document</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OutlineValues</name>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Linewidth</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PDFExportDialog</name>
<message>
<source>Save as PDF</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>O&amp;utput to File:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cha&amp;nge...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Output one file for eac&amp;h page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 does not exists and will be created, continue?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot create directory:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PDFToolBar</name>
<message>
<source>PDF Tools</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PDFlib</name>
<message>
<source>Saving PDF</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exporting Master Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exporting Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exporting Items on Current Page:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PPreview</name>
<message>
<source>Print Preview</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable &amp;Antialiasing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display Trans&amp;parency</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Display CMYK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;M</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;K</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Separation Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cyan</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Magenta</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Yellow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Black</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror Page(s) Horizontal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mirror Page(s) Vertical</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Clip to Page Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print in Grayscale</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Under Color Removal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Force Overprint Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Convert Spot Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply ICC Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scaling:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fit to Width</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fit to Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fit to Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Resize the scale of the page.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enables global Overprint Mode for this document, overrides object settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allows you to embed ICC profiles in the print stream when color management is enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable/disable the C (Cyan) ink plate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable/disable the M (Magenta) ink plate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable/disable the Y (Yellow) ink plate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable/disable the K (Black) ink plate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PSLib</name>
<message>
<source>Processing Master Page:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exporting Page:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PStyleWBase</name>
<message>
<source>Form1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distances and Alignment</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Drop Caps</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parent&apos;s Drop Cap Status</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tabulators and Indentation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ch&amp;aracter Style</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageItem</name>
<message>
<source>Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Polyline</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PathText</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Copy of</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageItemAttributes</name>
<message>
<source>None</source>
<comment>relationship</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relates To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Parent Of</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Child Of</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageItemAttributesBase</name>
<message>
<source>Page Item Attributes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relationship</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Relationship To</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageLayouts</name>
<message>
<source>Page Layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First Page is:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PagePalette</name>
<message>
<source>Double sided</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Middle Right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Drag pages or master pages onto the trashbin to delete them</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Here are all your master pages. To create a new page, drag a master page to the page view below</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arrange Pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available Master Pages:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document Pages:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageSelector</name>
<message>
<source>%1 of %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 of %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PatternDialog</name>
<message>
<source>Choose a Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Loading Patterns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PicSearchBase</name>
<message>
<source>Result</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Search Results for: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Preview</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+P</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Select</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alt+S</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PicStatus</name>
<message>
<source>Manage Pictures</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Status</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Case insensitive search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The filesystem will be searched for case insensitive file names when you check this on. Remember it is not default on most operating systems except MS Windows</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Search Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set a new location for the selected items. Useful when you may have moved the document but not the images.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel Search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Goto</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a base directory for search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus - Image Search</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The search failed: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No images named &quot;%1&quot; were found.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a base directory for your selected rows</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PixmapExportPlugin</name>
<message>
<source>Save as &amp;Image...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export As Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exports selected pages as bitmap images.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save as Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error writing the output file(s).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export successful</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PluginManager</name>
<message>
<source>Cannot find plugin</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown error</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot find symbol (%1)</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin: loading %1</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>There is a problem loading %1 of %2 plugins. %3 This is probably caused by some kind of dependency issue or old plugins existing in your install directory. If you clean out your install directory and reinstall and this still occurs, please report it on bugs.scribus.net.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>init failed</source>
<comment>plugin load error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown plugin type</source>
<comment>plugin load error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin: %1 loaded</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin: %1 failed to load: %2</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin: %1 initialized ok </source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin: %1 failed post initialization</source>
<comment>plugin manager</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PluginManagerPrefsGui</name>
<message>
<source>Plugin Manager</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>How to run</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Load it?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugin ID</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You need to restart the application to apply the changes.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PolygonProps</name>
<message>
<source>Polygon Properties</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PolygonWidget</name>
<message>
<source>Corn&amp;ers:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Rotation:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply &amp;Factor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Factor:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of corners for polygons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Degrees of rotation for polygons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply Convex/Concave Factor to change shape of Polygons</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample Polygon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A negative value will make the polygon concave (or star shaped), a positive value will make it convex</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Preferences</name>
<message>
<source>Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>General</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Guides</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Typography</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hyphenator</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fonts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preflight Verifier</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color Management</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF Export</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Document Item Attributes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Table of Contents and Indexes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Keyboard Shortcuts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>External Tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Miscellaneous</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Plugins</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PrefsDialogBase</name>
<message>
<source>Export...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Defaults</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Apply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All preferences can be reset here</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply all changes without closing the dialog</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export current preferences into file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save Preferences</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PrefsManager</name>
<message>
<source>PostScript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Migrate Old Scribus Settings?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus has detected existing Scribus 1.2 preferences files.
Do you want to migrate them to the new Scribus version?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not open preferences file &quot;%1&quot; for writing: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Writing to preferences file &quot;%1&quot; failed: QIODevice status code %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to open prefs file &quot;%1&quot;: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to read prefs XML from &quot;%1&quot;: %2 at line %3, col %4</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Postscript</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF 1.3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF 1.4</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF/X-3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error Writing Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus was not able to save its preferences:&lt;br&gt;%1&lt;br&gt;Please check file and directory permissions and available disk space.</source>
<comment>scribus app error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error Loading Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus was not able to load its preferences:&lt;br&gt;%1&lt;br&gt;Default settings will be loaded.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PresetLayout</name>
<message>
<source>None</source>
<comment>layout type</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Gutenberg</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Magazine</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Fibonacci</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Golden Mean</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nine Parts</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You can select a predefined page layout here. &apos;None&apos; leave margins as is, Gutenberg sets margins classically. &apos;Magazine&apos; sets all margins for same value. Leading is Left/Inside value.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PythonConsole</name>
<message>
<source>&amp;Open...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Exit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Run</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Run As &amp;Console</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save Output...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Script</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus Python Console</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is derived from standard Python console so it contains some limitations esp. in the case of whitespaces. Please consult Scribus manual for more informations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line: %1 Column: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Script Console</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Write your commands here. A selection is processed as script</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Output of your script</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Python Scripts (*.py *.PY)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open Python Script File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save the Python Commands in File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Text Files (*.txt)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save Current Output</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QColorDialog</name>
<message>
<source>Hu&amp;e:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Sat:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Val:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Red:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Green:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bl&amp;ue:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A&amp;lpha channel:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Basic colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Custom colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Define Custom Colors &gt;&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Add to Custom Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QFileDialog</name>
<message>
<source>Copy or Move a File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Read: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Write: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File &amp;name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File &amp;type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>One directory up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Date</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attributes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Look &amp;in:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create New Folder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List View</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Detail View</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview File Info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preview File Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Read-write</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Read-only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Write-only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Inaccessible</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Symlink to File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Symlink to Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Symlink to Special</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dir</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Special</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save As</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Rename</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>R&amp;eload</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sort by &amp;Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sort by &amp;Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sort by &amp;Date</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Unsorted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sort</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show &amp;hidden files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>the file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>the directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>the symlink</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;qt&gt;Are you sure you wish to delete %1 &quot;%2&quot;?&lt;/qt&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Folder 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Folder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Folder %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Find Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Directories</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1
File not found.
Check path and filename.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Files (*.*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Directory:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QFontDialog</name>
<message>
<source>&amp;Font</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font st&amp;yle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Effects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stri&amp;keout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Underline</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sample</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scr&amp;ipt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select Font</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QLineEdit</name>
<message>
<source>Clear</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Redo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Paste</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QMainWindow</name>
<message>
<source>Line up</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Customize...</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QMessageBox</name>
<message>
<source>&lt;h3&gt;About Qt&lt;/h3&gt;&lt;p&gt;This program uses Qt version %1.&lt;/p&gt;&lt;p&gt;Qt is a C++ toolkit for multiplatform GUI &amp;amp; application development.&lt;/p&gt;&lt;p&gt;Qt provides single-source portability across MS&amp;nbsp;Windows, Mac&amp;nbsp;OS&amp;nbsp;X, Linux, and all major commercial Unix variants.&lt;br&gt;Qt is also available for embedded devices.&lt;/p&gt;&lt;p&gt;Qt is a Trolltech product. See &lt;tt&gt;http://www.trolltech.com/qt/&lt;/tt&gt; for more information.&lt;/p&gt;</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<source>Font %1 is broken (no Face), discarding it</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font %1 cannot be read, no embedding</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Importing text</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Supported Formats</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Afrikaans</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arabic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Albanian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Basque</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bulgarian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Breton</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Catalan</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Chinese</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Croatian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Czech</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Danish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dzongkha</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Dutch</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>English</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>English (British)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Esperanto</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Estonian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>German</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>German (Trad.)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Finnish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>French</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Galician</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Greek</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hungarian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Latin</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Icelandic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Indonesian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Italian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Japanese</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Korean</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lithuanian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Luxembourgish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Norwegian (Bokm&#xc3;&#xa5;l)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Norwegian (Nnyorsk)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Norwegian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Polish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portuguese</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Portuguese (BR)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Romanian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Russian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Swedish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spanish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spanish (Latin)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Slovak</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Slovenian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Serbian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thai</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Turkish</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ukranian</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Welsh</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus Crash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus crashes due to Signal #%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;OK</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Scribus crashes due to the following exception : %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Page</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Master Page </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Custom</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>4A0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>2A0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Quarto</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Foolscap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Letter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Govt. Letter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Legal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ledger</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Executive</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Post</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Crown</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Large Post</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Demy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Medium</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Royal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Elephant</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double Demy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Quad Demy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>STMT</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>B</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>C</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>D</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>E</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Comm10E</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>DLE</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not open output file %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Output stream not writeable</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Verification of settings failed: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not open input file %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to read settings XML:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 (line %2 col %3)</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to read settings XML: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>null root node</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;pdfVersion&gt; invalid</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>found %1 &lt;%2&gt; nodes, need 1.</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>unexpected null &lt;%2&gt; node</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>node &lt;%1&gt; not an element</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>element &lt;%1&gt; lacks `value&apos; attribute</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>element &lt;%1&gt; value must be `true&apos; or `false&apos;</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>element &lt;lpiSettingsEntry&gt; lacks `name&apos; attribute</source>
<comment>Load PDF settings</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>All</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exporting PostScript File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Printing File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Black</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cyan</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Magenta</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Yellow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Creating Font Cache</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font %1 is broken, discarding it</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load font %1 - font type unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New Font found, checking...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Modified Font found, checking...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Font %1 loaded from %2(%3)</source>
<translation type="unfinished"></translation>
</message>