Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 23167 → Rev 23168

/trunk/Scribus/doc/de/scripterapi-styles.html
162,12 → 162,17
<li>dropcaplines [optional] -> height (in lines) of the caps if used</li>
<li>dropcapoffset [optional] -> offset of the caps if used</li>
<li>"charstyle" [optional] -> char style to use</li>
<li>"bullet" [optional] -> string to use as bullet</li>
</ul>
</p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:</p>
<p><strong>scribus.createParagraphStyle("MyNewStyle",0,0,0,0,0,0,0,0,0,"MyCharStyle")</strong></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:</p>
<p><strong>scribus.createParagraphStyle("MyOtherNewStyle",1)</strong></p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyNewStyle", 0, 0, 0, 0, 0, 0, 0, 0, 0, "MyCharStyle"))</code></li>
</ul></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyOtherNewStyle", 1)</code></li>
</ul></p>
</dd>
 
<dt><a name="-getAllStyles"><strong>getAllStyles</strong></a>(...)</dt>
/trunk/Scribus/doc/en/scripterapi-styles.html
162,12 → 162,17
<li>dropcaplines [optional] -> height (in lines) of the caps if used</li>
<li>dropcapoffset [optional] -> offset of the caps if used</li>
<li>"charstyle" [optional] -> char style to use</li>
<li>"bullet" [optional] -> string to use as bullet</li>
</ul>
</p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:</p>
<p><strong>scribus.createParagraphStyle("MyNewStyle",0,0,0,0,0,0,0,0,0,"MyCharStyle")</strong></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:</p>
<p><strong>scribus.createParagraphStyle("MyOtherNewStyle",1)</strong></p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyNewStyle", 0, 0, 0, 0, 0, 0, 0, 0, 0, "MyCharStyle"))</code></li>
</ul></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyOtherNewStyle", 1)</code></li>
</ul></p>
</dd>
 
<dt><a name="-getAllStyles"><strong>getAllStyles</strong></a>(...)</dt>
/trunk/Scribus/doc/fr/scripterapi-styles.html
159,12 → 159,17
<li>dropcaplines [optionnel] -> la hauteur des lettrines en nombre de lignes si l'utilisation de lettrines est activée</li>
<li>dropcapoffset [optionnel] -> décalage horizontal des lettrines si l'utilisation de lettrines est activée</li>
<li>"charstyle" [optionnel] -> nom du style de caractère à utiliser</li>
<li>"bullet" [optionnel] -> chaîne de caractère à utiliser pour les puces</li>
</ul>
</p>
<p>Si vous désirez omettre un certain nombre d'éléments, cette fonction n'acceptera pas de valeurs null, i.e., une série de virgule. Vous <i>devez</i> spécifier un paramètre entier pour chacun des paramètres omis. Par example, si vous désirez spécifier uniquement un nom de style de paragraphe et un nom de style de caractère, votre appel de fonction ressemblera à ceci:</p>
<p><strong>scribus.createParagraphStyle("MyNewStyle",0,0,0,0,0,0,0,0,0,"MyCharStyle")</strong></p>
<p>Cependant, si vous désirez spécifier uniquement un nom de style et un mode d'interlignage, vous pouvez alors limiter le nombre d'argument passé dans votre appel de fonction:</p>
<p><strong>scribus.createParagraphStyle("MyOtherNewStyle", 1)</strong></p>
<p>Si vous désirez omettre un certain nombre d'éléments, cette fonction n'acceptera pas de valeurs null, i.e., une série de virgule. Vous <i>devez</i> spécifier un paramètre entier pour chacun des paramètres omis. Par example, si vous désirez spécifier uniquement un nom de style de paragraphe et un nom de style de caractère, votre appel de fonction ressemblera à ceci:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyNewStyle",0,0,0,0,0,0,0,0,0,"MyCharStyle")</code></li>
</ul></p>
<p>Cependant, si vous désirez spécifier uniquement un nom de style et un mode d'interlignage, vous pouvez alors limiter le nombre d'argument passé dans votre appel de fonction:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyOtherNewStyle", 1)</code></li>
</ul></p>
</dd>
 
<dt><a name="-getAllStyles"><strong>getAllStyles</strong></a>(...)</dt>
/trunk/Scribus/doc/it/scripterapi-styles.html
162,12 → 162,17
<li>dropcaplines [optional] -> height (in lines) of the caps if used</li>
<li>dropcapoffset [optional] -> offset of the caps if used</li>
<li>"charstyle" [optional] -> char style to use</li>
<li>"bullet" [optional] -> string to use as bullet</li>
</ul>
</p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:</p>
<p><strong>scribus.createParagraphStyle("MyNewStyle",0,0,0,0,0,0,0,0,0,"MyCharStyle")</strong></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:</p>
<p><strong>scribus.createParagraphStyle("MyOtherNewStyle",1)</strong></p>
<p>If you wish to skip a number of settings, unfortunately, this command will not accept null values, i.e., a series of commas. You <i>must</i> put some integer value for each of the potential parameters. For example, imagine you wish to only specify a name for the Paragraph Style, and the Character Style. Your command should be something like:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyNewStyle", 0, 0, 0, 0, 0, 0, 0, 0, 0, "MyCharStyle"))</code></li>
</ul></p>
<p>On the other hand, if you only wanted to specify a name and linespacing mode, you can quit whenever after you finished with non-zero data:
<ul style="list-style-type:none">
<li><code>scribus.createParagraphStyle("MyOtherNewStyle", 1)</code></li>
</ul></p>
</dd>
 
<dt><a name="-getAllStyles"><strong>getAllStyles</strong></a>(...)</dt>
/trunk/Scribus/scribus/plugins/scriptplugin/cmdstyle.cpp
38,15 → 38,18
const_cast<char*>("dropcaplines"),
const_cast<char*>("dropcapoffset"),
const_cast<char*>("charstyle"),
const_cast<char*>("bullet"),
nullptr};
char *name = const_cast<char*>(""), *charStyle = const_cast<char*>("");
char *bullet = const_cast<char*>("");
int lineSpacingMode = 0, alignment = 0, dropCapLines = 2, hasDropCap = 0;
double lineSpacing = 15.0, leftMargin = 0.0, rightMargin = 0.0;
double gapBefore = 0.0, gapAfter = 0.0, firstIndent = 0.0, peOffset = 0;
if (!PyArg_ParseTupleAndKeywords(args, keywords, "es|ididddddiides",
if (!PyArg_ParseTupleAndKeywords(args, keywords, "es|ididddddiideses",
keywordargs, "utf-8", &name, &lineSpacingMode, &lineSpacing, &alignment,
&leftMargin, &rightMargin, &gapBefore, &gapAfter, &firstIndent,
&hasDropCap, &dropCapLines, &peOffset, "utf-8", &charStyle))
&hasDropCap, &dropCapLines, &peOffset, "utf-8", &charStyle,
"utf-8", &bullet))
return nullptr;
if (!checkHaveDocument())
return nullptr;
55,27 → 58,54
PyErr_SetString(PyExc_ValueError, QObject::tr("Cannot have an empty paragraph style name.","python error").toLocal8Bit().constData());
return nullptr;
}
if ((hasDropCap != 0) && (dropCapLines <= 1) )
{
PyErr_SetString(PyExc_ValueError, QObject::tr("hasdropcap is true but dropcaplines value is invalid","python error").toLocal8Bit().constData());
return nullptr;
}
if (strlen(bullet) > 0 && (hasDropCap != 0))
{
PyErr_SetString(PyExc_ValueError, QObject::tr("hasdropcap and bullet are not allowed to be specified together.","python error").toLocal8Bit().constData());
return nullptr;
}
 
ParagraphStyle tmpParagraphStyle;
tmpParagraphStyle.setName(name);
tmpParagraphStyle.setLineSpacingMode((ParagraphStyle::LineSpacingMode)lineSpacingMode);
tmpParagraphStyle.setLineSpacingMode((ParagraphStyle::LineSpacingMode) lineSpacingMode);
tmpParagraphStyle.setLineSpacing(lineSpacing);
tmpParagraphStyle.setAlignment((ParagraphStyle::AlignmentType)alignment);
tmpParagraphStyle.setAlignment((ParagraphStyle::AlignmentType) alignment);
tmpParagraphStyle.setLeftMargin(leftMargin);
tmpParagraphStyle.setFirstIndent(firstIndent);
tmpParagraphStyle.setRightMargin(rightMargin);
tmpParagraphStyle.setGapBefore(gapBefore);
tmpParagraphStyle.setGapAfter(gapAfter);
if (hasDropCap == 0)
tmpParagraphStyle.setHasDropCap(false);
else if (hasDropCap == 1)
if (hasDropCap != 0)
{
tmpParagraphStyle.setDropCapLines(dropCapLines);
tmpParagraphStyle.setHasDropCap(true);
tmpParagraphStyle.setHasBullet(false);
tmpParagraphStyle.setHasNum(false);
}
else
{
PyErr_SetString(PyExc_ValueError, QObject::tr("hasdropcap has to be 0 or 1.","python error").toLocal8Bit().constData());
return nullptr;
tmpParagraphStyle.setHasDropCap(false);
}
tmpParagraphStyle.setDropCapLines(dropCapLines);
if (strlen(bullet) > 0)
{
tmpParagraphStyle.setBulletStr(QString::fromUtf8(bullet));
tmpParagraphStyle.setHasDropCap(false);
tmpParagraphStyle.setHasBullet(true);
tmpParagraphStyle.setHasNum(false);
}
else
{
tmpParagraphStyle.setHasBullet(false);
}
tmpParagraphStyle.setParEffectOffset(peOffset);
tmpParagraphStyle.charStyle().setParent(charStyle);
 
/trunk/Scribus/scribus/plugins/scriptplugin/cmdstyle.h
40,6 → 40,7
dropcaplines [optional] -> height (in lines) of the caps if used\n\n\
dropcapoffset [optional] -> offset of the caps if used\n\n\
\"charstyle\" [optional] -> char style to use\n\n\
\"bullet\" [optional] -> string to use as bullet\n\n\
"));
/*! 02.01.2007 - 05.01.2007 : Joachim Neu : Create a paragraph style.
Special thanks go to avox for helping me! */