Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 24013 → Rev 24014

/trunk/Scribus/doc/de/scripterapi-doc.html
154,6 → 154,18
relative path).</p>
<p>May raise ScribusError if the save fails.</p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setBleeds"><strong>setBleeds</strong></a>(...)</dt>
<dd><code>setBleeds(lr, rr, tr, br)</code>
<p>Sets the bleeds of the document. Left(lr), Right(rr), Top(tr) and Bottom(br) bleeds are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setInfo"><strong>setInfo</strong></a>(...)</dt>
<dd><code>setInfo("author", "info", "description") -&gt; bool</code>
<p>Sets the document information. "Author", "Info", "Description" are strings.</p></dd>
162,10 → 174,6
<dd><code>setMargins(lr, rr, tr, br)</code>
<p>Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setUnit"><strong>setUnit</strong></a>(...)</dt>
<dd><code>setUnit(type)</code>
<p>Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_&lt;type&gt;.</p>
174,10 → 182,6
<p><i>do some operations...then later</i></p>
<p><b>setUnit(original)</b></p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-scrollDocument"><strong>scrollDocument</strong>(...)</a></dt>
<dd><code>scrollDocument(x,y)</code>
<p>Scroll the document in main GUI window by x and y.</p></dd>
/trunk/Scribus/doc/en/scripterapi-doc.html
154,6 → 154,18
relative path).</p>
<p>May raise ScribusError if the save fails.</p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setBleeds"><strong>setBleeds</strong></a>(...)</dt>
<dd><code>setBleeds(lr, rr, tr, br)</code>
<p>Sets the bleeds of the document. Left(lr), Right(rr), Top(tr) and Bottom(br) bleeds are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setInfo"><strong>setInfo</strong></a>(...)</dt>
<dd><code>setInfo("author", "info", "description") -&gt; bool</code>
<p>Sets the document information. "Author", "Info", "Description" are strings.</p></dd>
162,10 → 174,6
<dd><code>setMargins(lr, rr, tr, br)</code>
<p>Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setUnit"><strong>setUnit</strong></a>(...)</dt>
<dd><code>setUnit(type)</code>
<p>Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_&lt;type&gt;.</p>
174,10 → 182,6
<p><i>do some operations...then later</i></p>
<p><b>setUnit(original)</b></p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-scrollDocument"><strong>scrollDocument</strong>(...)</a></dt>
<dd><code>scrollDocument(x,y)</code>
<p>Scroll the document in main GUI window by x and y.</p></dd>
/trunk/Scribus/doc/fr/scripterapi-doc.html
122,6 → 122,18
<p>Enregistre le document courant sous le nouveau "nom" (qui peut être un chemin complet ou relatif).</p>
<p>Peut générer ScribusError si l'enregistrement échoue.</p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Définit les valeurs de la ligne de base du document: espacement de la grille(grid), offset de la grille(offset). Les valeurs sont définies dans les unités de mesure du document - voir les constantes UNIT_&lt;type&gt;.</p></dd>
 
<dt><a name="-setBleeds"><strong>setBleeds</strong></a>(...)</dt>
<dd><code>setBleeds(lr, rr, tr, br)</code>
<p>Définit les valeurs de fonds perdus du document. Les valeurs de fonds perdus à gauche (lr), à droite (rr), en haut (tr) et en bas (br) sont définies dans les unités de mesure du document - voir les constantes UNIT_&lt;type&gt;.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(pagesRegard, premierePageGauche)</code>
<p>Assigne le type de document. Pour obtenir des pages en regard, mettez le premier paramètre à FACINGPAGES; pour désactiver facingPages, utilisez NOFACINGPAGES à la place. Si vous voulez que la première page soit à gauche, mettez le deuxième paramètre à FIRSTPAGELEFT; pour une première page à droite, utilisez FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setInfo"><strong>setInfo</strong></a>(...)</dt>
<dd><code>saveDocAs("auteur", "info",
"description") -&gt; booléen</code>
134,15 → 146,19
Haut(tr) et Bas(br) sont indiquées dans les unités de mesure du
document - voir les constantes UNIT_&lt;type&gt;.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(pagesRegard, premierePageGauche)</code>
<p>Assigne le type de document. Pour obtenir des pages en regard, mettez le premier paramètre à FACINGPAGES; pour désactiver facingPages, utilisez NOFACINGPAGES à la place. Si vous voulez que la première page soit à gauche, mettez le deuxième paramètre à FIRSTPAGELEFT; pour une première page à droite, utilisez FIRSTPAGERIGHT.</p></dd>
<dt><a name="-setUnit"><strong>setUnit</strong></a>(...)</dt>
<dd><code>setUnit(type)</code>
<p>Change l'unité de mesure du document. Les valeurs possibles de l'"unité" sont définies par les constantes UNIT_&lt;type&gt;.</p>
<p>Peut générer ValueError si l'unité passée n'est pas valide.</p></dd>
 
<dt><a name="-scrollDocument"><strong>scrollDocument</strong>(...)</a></dt>
<dd><code>scrollDocument(x, y)</code>
<p>Scrolle le document affiché dans la fenêtre active par les valeurs x and y.</p></dd>
 
<dt><a name="-zoomDocument"><strong>zoomDocument</strong>(...)</a></dt>
<dd><code>zoomDocument(double)</code>
<p>Effectue un zoom du document affiché dans la fenêtre active. Les valeurs de zoom prennent des valeurs positives telles que 20.0, 100.0, etc. Vous pouvez utiliser la valeur spéciale -100.0 pour ajuster automatiquement la valeur de zoom.</p></dd>
 
</dl>
</body>
</html>
/trunk/Scribus/doc/it/scripterapi-doc.html
154,6 → 154,18
relative path).</p>
<p>May raise ScribusError if the save fails.</p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setBleeds"><strong>setBleeds</strong></a>(...)</dt>
<dd><code>setBleeds(lr, rr, tr, br)</code>
<p>Sets the bleeds of the document. Left(lr), Right(rr), Top(tr) and Bottom(br) bleeds are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setInfo"><strong>setInfo</strong></a>(...)</dt>
<dd><code>setInfo("author", "info", "description") -&gt; bool</code>
<p>Sets the document information. "Author", "Info", "Description" are strings.</p></dd>
162,10 → 174,6
<dd><code>setMargins(lr, rr, tr, br)</code>
<p>Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setUnit"><strong>setUnit</strong></a>(...)</dt>
<dd><code>setUnit(type)</code>
<p>Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_&lt;type&gt;.</p>
174,10 → 182,6
<p><i>do some operations...then later</i></p>
<p><b>setUnit(original)</b></p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-scrollDocument"><strong>scrollDocument</strong>(...)</a></dt>
<dd><code>scrollDocument(x,y)</code>
<p>Scroll the document in main GUI window by x and y.</p></dd>
/trunk/Scribus/doc/ru/scripterapi-doc.html
154,6 → 154,18
relative path).</p>
<p>May raise ScribusError if the save fails.</p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setBleeds"><strong>setBleeds</strong></a>(...)</dt>
<dd><code>setBleeds(lr, rr, tr, br)</code>
<p>Sets the bleeds of the document. Left(lr), Right(rr), Top(tr) and Bottom(br) bleeds are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setInfo"><strong>setInfo</strong></a>(...)</dt>
<dd><code>setInfo("author", "info", "description") -&gt; bool</code>
<p>Sets the document information. "Author", "Info", "Description" are strings.</p></dd>
162,10 → 174,6
<dd><code>setMargins(lr, rr, tr, br)</code>
<p>Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br) margins are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-setDocType"><strong>setDocType</strong></a>(...)</dt>
<dd><code>setDocType(facingPages, firstPageLeft)</code>
<p>Sets the document type. To get facing pages set the first parameter to FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want to be the first page a left side set the second parameter to FIRSTPAGELEFT, for a right page use FIRSTPAGERIGHT.</p></dd>
 
<dt><a name="-setUnit"><strong>setUnit</strong></a>(...)</dt>
<dd><code>setUnit(type)</code>
<p>Changes the measurement unit of the document. Possible values for "unit" are defined as constants UNIT_&lt;type&gt;.</p>
174,10 → 182,6
<p><i>do some operations...then later</i></p>
<p><b>setUnit(original)</b></p></dd>
 
<dt><a name="-setBaseLine"><strong>setBaseLine</strong></a>(...)</dt>
<dd><code>setBaseLine(grid, offset)</code>
<p>Sets the base line settings of the document, grid spacing(grid), grid offset(offset). Values are given in the measurement units of the document - see UNIT_&lt;type&gt; constants.</p></dd>
 
<dt><a name="-scrollDocument"><strong>scrollDocument</strong>(...)</a></dt>
<dd><code>scrollDocument(x,y)</code>
<p>Scroll the document in main GUI window by x and y.</p></dd>