Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 24148 → Rev 24149

/trunk/Scribus/doc/de/scripterapi-layer.html
13,7 → 13,7
 
<dt><a name="-createLayer"><strong>createLayer</strong></a>(...)</dt>
<dd><code>createLayer(layer)</code>
<p>Creates a new layer with the name "name".</p>
<p>Creates a new layer with the name "name". Note that when you create a layer, you will automatically be editing on that layer. In other words, this new layer becomes the active layer.</p>
<p>May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-deleteLayer"><strong>deleteLayer</strong></a>(...)</dt>
62,11 → 62,15
<p>Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<dt><a name="-sendToLayer"><strong>sendToLayer</strong></a>(...)</dt>
<dd><code>sendToLayer("layer" [, "name"])</code>
<p>Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<p>Obsolete. Use sendToLayer() instead.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("name")</code>
<p>Sets the active layer to the layer named "name".</p>
/trunk/Scribus/doc/en/scripterapi-layer.html
62,11 → 62,15
<p>Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<dt><a name="-sendToLayer"><strong>sendToLayer</strong></a>(...)</dt>
<dd><code>sendToLayer("layer" [, "name"])</code>
<p>Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<p>Obsolete. Use sendToLayer() instead.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("name")</code>
<p>Sets the active layer to the layer named "name".</p>
/trunk/Scribus/doc/fr/scripterapi-layer.html
36,11 → 36,15
<p>Indique si le "calque" est visible ou non; une valeur True signifie que le "calque" est visible et une valeur False, que le "calque" est invisible.</p>
<p>Peut générer <a href="scripterapi.html#NotFoundError">NotFoundError</a> si le calque est introuvable. Peut générer ValueError si le nom du calque n'est pas valide.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("calque" [, "nom"])</code>
<dt><a name="-sendToLayer"><strong>sendToLayer</strong></a>(...)</dt>
<dd><code>sendToLayer("calque" [, "nom"])</code>
<p>Envoie l'objet "nom" au calque "calque". Le calque doit exister. Si "nom" n'est pas fourni, l'élément sélectionné est utilisé. </p>
<p>Peut générer <a href="scripterapi.html#NotFoundError">NotFoundError</a> si le calque est introuvable. Peut générer ValueError si le nom du calque n'est pas valide.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("calque" [, "nom"])</code>
<p>Oboslète. Veuillez utiliser sendToLayer() en lieu et place.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("nom")</code>
<p>Rend actif le calque nommé "nom".</p>
/trunk/Scribus/doc/it/scripterapi-layer.html
1,109 → 1,116
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<title>Layer related Commands</title>
</head>
<body>
<h2>Layer related Commands</h2>
 
<dl>
 
<dt><a name="-createLayer"><strong>createLayer</strong></a>(...)</dt>
<dd><code>createLayer(layer)</code>
<p>Creates a new layer with the name "name".</p>
<p>May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-deleteLayer"><strong>deleteLayer</strong></a>(...)</dt>
<dd><code>deleteLayer("layer")</code>
<p>Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-getActiveLayer"><strong>getActiveLayer</strong></a>(...)</dt>
<dd><code>getActiveLayer() -&gt; string</code>
<p>Returns the name of the current active layer.</p></dd>
 
<dt><a name="-getLayers"><strong>getLayers</strong></a>(...)</dt>
<dd><code>getLayers() -&gt; list</code>
<p>Returns a list with the names of all defined layers.</p></dd>
 
<dt><a name="-getLayerBlendmode"><strong>getLayerBlendmode</strong>(...)</a></dt>
<dd><code>getLayerBlendmode("layer") -&gt; int</code>
<p>Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerFlow"><strong>isLayerFlow</strong>(...)</a></dt>
<dd><code>isLayerFlow("layer") -&gt; bool</code>
<p>Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerLocked"><strong>isLayerLocked</strong>(...)</a></dt>
<dd><code>isLayerLocked("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-getLayerTransparency"><strong>getLayerTransparency</strong>(...)</a></dt>
<dd><code>getLayerTransparency("layer") -&gt; float</code>
<p>Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerOutlined"><strong>isLayerOutlined</strong>(...)</a></dt>
<dd><code>isLayerOutlined("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerPrintable"><strong>isLayerPrintable</strong></a>(...)</dt>
<dd><code>isLayerPrintable("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerVisible"><strong>isLayerVisible</strong></a>(...)</dt>
<dd><code>isLayerVisible("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<p>Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("name")</code>
<p>Sets the active layer to the layer named "name".</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerBlendmode"><strong>setLayerBlendmode</strong>(...)</a></dt>
<dd><code>setLayerBlendmode"layer", blend)</code>
<p>Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found.</p>
<p>May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerFlow"><strong>setLayerFlow</strong>(...)</a></dt>
<dd><code>setLayerFlow"layer", flow)</code>
<p>Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerLocked"><strong>setLayerLocked</strong>(...)</a></dt>
<dd><code>setLayerLocked("layer", locked)</code>
<p>Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerOutlined"><strong>setLayerOutlined</strong>(...)</a></dt>
<dd><code>setLayerOutlined"layer", outline)</code>
<p>Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerPrintable"><strong>setLayerPrintable</strong></a>(...)</dt>
<dd><code>setLayerPrintable("layer", printable)</code>
<p>Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerTransparency"><strong>setLayerTransparency</strong>(...)</a></dt>
<dd><code>setLayerTransparency"layer", trans)</code>
<p>Sets the layers "layer" transparency to trans.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerVisible"><strong>setLayerVisible</strong></a>(...)</dt>
<dd><code>setLayerVisible("layer", visible)</code>
<p>Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
</dl>
</body>
</html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<title>Layer related Commands</title>
</head>
<style>
@import "manual.css";
</style>
<body>
<h2>Layer related Commands</h2>
 
<dl>
 
<dt><a name="-createLayer"><strong>createLayer</strong></a>(...)</dt>
<dd><code>createLayer(layer)</code>
<p>Creates a new layer with the name "name". Note that when you create a layer, you will automatically be editing on that layer. In other words, this new layer becomes the active layer.</p>
<p>May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-deleteLayer"><strong>deleteLayer</strong></a>(...)</dt>
<dd><code>deleteLayer("layer")</code>
<p>Deletes the layer with the name "layer". Nothing happens if the layer doesn't exists or if it's the only layer in the document.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-getActiveLayer"><strong>getActiveLayer</strong></a>(...)</dt>
<dd><code>getActiveLayer() -&gt; string</code>
<p>Returns the name of the current active layer.</p></dd>
 
<dt><a name="-getLayers"><strong>getLayers</strong></a>(...)</dt>
<dd><code>getLayers() -&gt; list</code>
<p>Returns a list with the names of all defined layers.</p></dd>
 
<dt><a name="-getLayerBlendmode"><strong>getLayerBlendmode</strong>(...)</a></dt>
<dd><code>getLayerBlendmode("layer") -&gt; int</code>
<p>Returns the "layer" layer blendmode, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerFlow"><strong>isLayerFlow</strong>(...)</a></dt>
<dd><code>isLayerFlow("layer") -&gt; bool</code>
<p>Returns whether text flows around objects on layer "layer", a value of True means that text flows around, a value of False means that the text does not flow around.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerLocked"><strong>isLayerLocked</strong>(...)</a></dt>
<dd><code>isLayerLocked("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is locked or not, a value of True means that the layer "layer" is editable, a value of False means that the layer "layer" is locked.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-getLayerTransparency"><strong>getLayerTransparency</strong>(...)</a></dt>
<dd><code>getLayerTransparency("layer") -&gt; float</code>
<p>Returns the "layer" layer transparency, May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerOutlined"><strong>isLayerOutlined</strong>(...)</a></dt>
<dd><code>isLayerOutlined("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is outlined or not, a value of True means that the layer "layer" is outlined, a value of False means that the layer "layer" is normal.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerPrintable"><strong>isLayerPrintable</strong></a>(...)</dt>
<dd><code>isLayerPrintable("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is printable or not, a value of True means that the layer "layer" can be printed, a value of False means that printing the layer "layer" is disabled.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-isLayerVisible"><strong>isLayerVisible</strong></a>(...)</dt>
<dd><code>isLayerVisible("layer") -&gt; bool</code>
<p>Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sendToLayer"><strong>sendToLayer</strong></a>(...)</dt>
<dd><code>sendToLayer("layer" [, "name"])</code>
<p>Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<p>Obsolete. Use sendToLayer() instead.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("name")</code>
<p>Sets the active layer to the layer named "name".</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerBlendmode"><strong>setLayerBlendmode</strong>(...)</a></dt>
<dd><code>setLayerBlendmode"layer", blend)</code>
<p>Sets the layers "layer" blendmode to blend. May raise NotFoundError if the layer can't be found.</p>
<p>May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerFlow"><strong>setLayerFlow</strong>(...)</a></dt>
<dd><code>setLayerFlow"layer", flow)</code>
<p>Sets the layers "layer" flowcontrol to flow. If flow is set to true text in layers above this one will flow around objects on this layer.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerLocked"><strong>setLayerLocked</strong>(...)</a></dt>
<dd><code>setLayerLocked("layer", locked)</code>
<p>Sets the layer "layer" to be locked or not. If locked is set to true the layer will be locked.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerOutlined"><strong>setLayerOutlined</strong>(...)</a></dt>
<dd><code>setLayerOutlined"layer", outline)</code>
<p>Sets the layer "layer" to be locked or not. If outline is set to true the layer will be displayed outlined.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerPrintable"><strong>setLayerPrintable</strong></a>(...)</dt>
<dd><code>setLayerPrintable("layer", printable)</code>
<p>Sets the layer "layer" to be printable or not. If is the printable set to false the layer won't be printed.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerTransparency"><strong>setLayerTransparency</strong>(...)</a></dt>
<dd><code>setLayerTransparency"layer", trans)</code>
<p>Sets the layers "layer" transparency to trans.</p>
<p>May raise NotFoundError if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-setLayerVisible"><strong>setLayerVisible</strong></a>(...)</dt>
<dd><code>setLayerVisible("layer", visible)</code>
<p>Sets the layer "layer" to be visible or not. If is the visible set to false the layer is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
</dl>
</body>
</html>
/trunk/Scribus/doc/ru/scripterapi-layer.html
62,11 → 62,15
<p>Returns whether the layer "layer" is visible or not, a value of True means that the layer "layer" is visible, a value of False means that the layer "layer" is invisible.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<dt><a name="-sendToLayer"><strong>sendToLayer</strong></a>(...)</dt>
<dd><code>sendToLayer("layer" [, "name"])</code>
<p>Sends the object "name" to the layer "layer". The layer must exist. If "name" is not given the currently selected item is used.</p>
<p>May raise <a href="scripterapi.html#NotFoundError">NotFoundError</a> if the layer can't be found. May raise ValueError if the layer name isn't acceptable.</p></dd>
 
<dt><a name="-sentToLayer"><strong>sentToLayer</strong></a>(...)</dt>
<dd><code>sentToLayer("layer" [, "name"])</code>
<p>Obsolete. Use sendToLayer() instead.</p></dd>
 
<dt><a name="-setActiveLayer"><strong>setActiveLayer</strong></a>(...)</dt>
<dd><code>setActiveLayer("name")</code>
<p>Sets the active layer to the layer named "name".</p>