Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 15293 → Rev 15294

/trunk/Scribus/resources/translations/po/scribus.de_CH.ts
2213,40 → 2213,73
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with document page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageMargins()
 
Returns the document page margins as a (top, left, right, bottom) tuple in the document&apos;s current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageNMargins(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished">getPageSize() -&gt; tuple
<translation type="obsolete">getPageSize() -&gt; tuple
 
Gibt eine Liste mit der Seitengrösse in der aktuellen Masseinheit zurück, siehe
UNIT-Konstanten und getPageMargins()</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished">getPageNSize() -&gt; tuple
<translation type="obsolete">getPageNSize() -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished">getPageNMargins() -&gt; tuple
<translation type="obsolete">getPageNMargins() -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="200"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
2263,13 → 2296,12
ein Textrahmen ist (type 4) und sich auf der ersten Seite befindet...</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished">getPageMargins()
<translation type="obsolete">getPageMargins()
 
Gibt die Seitenränder als ein Tupel in der gerade aktiven Einheit zurück (oben, unten, links, rechts).
Mögliche Einheiten finden Sie bei UNIT_&lt;tye&gt; und getPageSize().
6877,12 → 6909,12
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="650"/>
<location filename="../../../scribus/ui/about.cpp" line="654"/>
<source>Check for Updates</source>
<translation>Suche nach Aktualisierungen</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="648"/>
<location filename="../../../scribus/ui/about.cpp" line="652"/>
<source>Abort Update Check</source>
<translation>Suche nach Aktualisierungen abbrechen</translation>
</message>
6912,9 → 6944,9
<translation>Webmaster:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="448"/>
<location filename="../../../scribus/ui/about.cpp" line="560"/>
<location filename="../../../scribus/ui/about.cpp" line="626"/>
<location filename="../../../scribus/ui/about.cpp" line="449"/>
<location filename="../../../scribus/ui/about.cpp" line="563"/>
<location filename="../../../scribus/ui/about.cpp" line="630"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Datei %1 kann nicht geöffnet werden. Bitte überprüfen Sie das Installationsverzeichnis oder besuchen Sie die Scribus-Website, um Informationen über %1 zu erhalten.</translation>
</message>
8853,12 → 8885,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="475"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="474"/>
<source>Y: %1%2</source>
<translation>Y: %1 %2</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="483"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="482"/>
<source>X: %1%2</source>
<translation>X: %1 %2</translation>
</message>
19165,9 → 19197,8
<translation>Ebene sperren</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation>Text umfliesst Objekte in tieferliegenden Ebenen - Falls aktiviert, fliesst Text um andere Objekte herum, auch wenn sich diese auf tieferen Ebenen befinden</translation>
<translation type="obsolete">Text umfliesst Objekte in tieferliegenden Ebenen - Falls aktiviert, fliesst Text um andere Objekte herum, auch wenn sich diese auf tieferen Ebenen befinden</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="609"/>
19213,6 → 19244,11
<translation>Ebene absenken</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="610"/>
<source>Name of the Layer - Double click on the name of a layer to edit the name</source>
<translation>Name der Ebene. Doppelklicken Sie auf den Namen, um diesen zu ändern</translation>
21882,37 → 21918,37
<translation>Analysiere Objekte auf der Seite:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="184"/>
<location filename="../../../scribus/pdflib_core.cpp" line="187"/>
<source>Qt build miss both &quot;UTF-16&quot; and &quot;ISO-10646-UCS-2&quot; text codecs, pdf export is not possible</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2843"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2847"/>
<source>Page:</source>
<translation>Seite:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2856"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2860"/>
<source>Date:</source>
<translation>Datum:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10342"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10346"/>
<source>Failed to load an image : %1</source>
<translation>Konnte Bild %1 nicht laden</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10357"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10361"/>
<source>Insufficient memory for processing an image</source>
<translation>Es ist nicht genügend Speicher für ein Bild dieser Grösse vorhanden</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to write an image : %1</source>
<translation>Es konnte kein Bild gespeichert werden: %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10352"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10356"/>
<source>Failed to load an image mask : %1</source>
<translation>Es konnte keine Bildmaske geladen werden: %1</translation>
</message>
21921,7 → 21957,7
<translation type="obsolete">Fehler beim Schreiben der Datei. Überprüfen Sie, ob ausreichen Speicherplatz zur Verfügung steht.</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10337"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10341"/>
<source>A write error occurred, please check available disk space</source>
<translation>Fehler beim Schreiben der Datei. Überprüfen Sie, ob ausreichend Speicherplatz zur Verfügung steht</translation>
</message>
29759,7 → 29795,7
</message>
<message>
<location filename="../../../scribus/ui/prefs_scrapbook.cpp" line="28"/>
<source>The minimum number is 1; the maximum us 100</source>
<source>The minimum number is 1; the maximum is 100</source>
<translation type="unfinished"></translation>
</message>
</context>
34208,12 → 34244,12
<translation>element &lt;lpiSettingsEntry&gt; lacks `name&apos; attribute</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="48"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="54"/>
<source>Freetype2 library not available</source>
<translation>Freetype2-Bibliotheken sind nicht verfügbar</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="313"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="319"/>
<location filename="../../../scribus/fonts/scface_ttf.cpp" line="585"/>
<source>Font %1 is broken (read stream), no embedding</source>
<translation>Die Schrift %1 ist fehlerhaft und kann nicht eingebettet werden</translation>
34224,7 → 34260,7
<translation>Schrift %1 ist fehlerhaft (kein Schnitt) und wird verworfen</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="129"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="135"/>
<location filename="../../../scribus/scfonts.cpp" line="361"/>
<location filename="../../../scribus/scfonts.cpp" line="398"/>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
34287,7 → 34323,7
<translation>memcpy offset: %1 %2 %3</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<location filename="../../../scribus/scribus.cpp" line="612"/>
<source>Scribus Development Version</source>
<translation>Scribus-Entwickerversion</translation>
</message>
34380,8 → 34416,8
</message>
<message>
<location filename="../../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../../scribus/scribus.cpp" line="1670"/>
<location filename="../../../scribus/scribus.cpp" line="1956"/>
<location filename="../../../scribus/scribus.cpp" line="1673"/>
<location filename="../../../scribus/scribus.cpp" line="1959"/>
<source>Document Template: </source>
<translation>Dokumentvorlagen:</translation>
</message>
34552,12 → 34588,17
<translation>argument contains no-numeric values: must be list of float values.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</source>
<comment>python error</comment>
<translation>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</translation>
<translation type="obsolete">Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 300.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="266"/>
<source>Line shade out of bounds, must be 0 &lt;= shade &lt;= 100.</source>
<comment>python error</comment>
34795,7 → 34836,7
<translation>Suche nach Schriften läuft</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4167"/>
<location filename="../../../scribus/scribus.cpp" line="4170"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>Die Änderungen am Dokument wurden nicht gesichert, und Sie möchten zur gespeicherten Version zurückkehren. Wollen Sie das wirklich?</translation>
</message>
34831,17 → 34872,17
<translation>Datei drucken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3421"/>
<location filename="../../../scribus/scribus.cpp" line="3424"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation>&lt;p&gt;Sie versuchen, mehr Seiten zu importieren, als ab der aktuellen Seite im Dokument vorhanden sind.&lt;/p&gt;Was wollen Sie tun?&lt;br&gt;&lt;ul&gt;&lt;li&gt;Fehlende Seiten &lt;b&gt;erstellen&lt;/b&gt;&lt;/li&gt;&lt;li&gt;Import bei der letzten Seite &lt;b&gt;stoppen&lt;/b&gt;&lt;/li&gt;&lt;li&gt;&lt;b&gt;Abbrechen&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3425"/>
<location filename="../../../scribus/scribus.cpp" line="3428"/>
<source>C&amp;reate</source>
<translation>Er&amp;stellen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3426"/>
<location filename="../../../scribus/scribus.cpp" line="3429"/>
<source>&amp;Import</source>
<translation>&amp;Importieren</translation>
</message>
34907,8 → 34948,8
<translation>Der Name der Musterseite entspricht keinem bereits existierenden.</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="63"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="80"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="69"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="86"/>
<source>Font %1(%2) is broken</source>
<translation>Die Schriftart %1(%2) ist fehlerhaft</translation>
</message>
35141,7 → 35182,7
<translation>%1 Könnte beschädigt sein: Fehlende Auflösungs-Tags</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="177"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="183"/>
<source>Font %1 has broken glyph %2</source>
<translation>Schrift %1 enthält das defekte Zeichen %2</translation>
</message>
35175,7 → 35216,7
<translation>Dies scheint kein PDB-Dokument zu sein. Bitte melden Sie den Fehler, wenn Sie sicher sind, dass es doch eines ist.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="614"/>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<source>You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation>Sie arbeiten mit einer Entwicklerversion von Scribus 1.3.x. Das Dokument, mit dem Sie arbeiten, wurde mit Scribus 1.2.x oder niedriger erstellt. Wenn Sie jetzt speichern, können Sie die Datei nicht mehr in Scribus 1.2.x verwenden, es sei denn, Sie speichern diese Datei unter einem anderen Namen. Wollen Sie wirklich fortfahren?</translation>
</message>
38162,7 → 38203,7
<translation type="obsolete">Bearbeiten</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>Fatal Error</source>
<translation>Fataler Fehler</translation>
</message>
38171,17 → 38212,17
<translation type="obsolete">&amp;Datei</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="629"/>
<location filename="../../../scribus/scribus.cpp" line="628"/>
<source>Open &amp;Recent</source>
<translation>&amp;Zuletzt verwendete öffnen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="637"/>
<location filename="../../../scribus/scribus.cpp" line="636"/>
<source>&amp;Import</source>
<translation>&amp;Importieren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="644"/>
<location filename="../../../scribus/scribus.cpp" line="643"/>
<source>&amp;Export</source>
<translation>E&amp;xportieren</translation>
</message>
38218,22 → 38259,22
<translation type="obsolete">&amp;Objekt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="746"/>
<location filename="../../../scribus/scribus.cpp" line="745"/>
<source>Preview Settings</source>
<translation>Vorschaumodus</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="729"/>
<location filename="../../../scribus/scribus.cpp" line="728"/>
<source>Level</source>
<translation>Anordnung</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="735"/>
<location filename="../../../scribus/scribus.cpp" line="734"/>
<source>Send to La&amp;yer</source>
<translation>Auf andere &amp;Ebene verschieben</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="754"/>
<location filename="../../../scribus/scribus.cpp" line="753"/>
<source>&amp;PDF Options</source>
<translation>&amp;PDF-Optionen</translation>
</message>
38242,7 → 38283,7
<translation type="obsolete">&amp;Form</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="760"/>
<location filename="../../../scribus/scribus.cpp" line="759"/>
<source>C&amp;onvert To</source>
<translation>Um&amp;wandeln in</translation>
</message>
38287,66 → 38328,66
<translation type="obsolete">Aus&amp;richtung</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1694"/>
<location filename="../../../scribus/scribus.cpp" line="1734"/>
<location filename="../../../scribus/scribus.cpp" line="3873"/>
<location filename="../../../scribus/scribus.cpp" line="4268"/>
<location filename="../../../scribus/scribus.cpp" line="4482"/>
<location filename="../../../scribus/scribus.cpp" line="4621"/>
<location filename="../../../scribus/scribus.cpp" line="9390"/>
<location filename="../../../scribus/scribus.cpp" line="1697"/>
<location filename="../../../scribus/scribus.cpp" line="1737"/>
<location filename="../../../scribus/scribus.cpp" line="3876"/>
<location filename="../../../scribus/scribus.cpp" line="4271"/>
<location filename="../../../scribus/scribus.cpp" line="4485"/>
<location filename="../../../scribus/scribus.cpp" line="4624"/>
<location filename="../../../scribus/scribus.cpp" line="9397"/>
<source>Ready</source>
<translation>Fertig</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2490"/>
<location filename="../../../scribus/scribus.cpp" line="2493"/>
<source>1 Object selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2492"/>
<location filename="../../../scribus/scribus.cpp" line="2495"/>
<source>%1 Objects selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3268"/>
<location filename="../../../scribus/scribus.cpp" line="3376"/>
<location filename="../../../scribus/scribus.cpp" line="3964"/>
<location filename="../../../scribus/scribus.cpp" line="3271"/>
<location filename="../../../scribus/scribus.cpp" line="3379"/>
<location filename="../../../scribus/scribus.cpp" line="3967"/>
<source>Open</source>
<translation>Öffnen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3391"/>
<location filename="../../../scribus/scribus.cpp" line="3394"/>
<source>Importing Pages...</source>
<translation>Seiten werden importiert...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3420"/>
<location filename="../../../scribus/scribus.cpp" line="3423"/>
<source>Import Page(s)</source>
<translation>Seiten importieren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3462"/>
<location filename="../../../scribus/scribus.cpp" line="3465"/>
<source>Import done</source>
<translation>Import erfolgreich abgeschlossen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3466"/>
<location filename="../../../scribus/scribus.cpp" line="3469"/>
<source>Found nothing to import</source>
<translation>Nichts zum Importieren gefunden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3554"/>
<location filename="../../../scribus/scribus.cpp" line="3557"/>
<source>File does not exist on the specified path :
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>File %1 is not in an acceptable format</source>
<translation>Das Format der Datei %1 kann nicht verwendet werden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3620"/>
<location filename="../../../scribus/scribus.cpp" line="3623"/>
<source>Loading...</source>
<translation>Lade...</translation>
</message>
38359,50 → 38400,50
<translation type="obsolete">Einige ICC-Profile in dem Dokument sind auf Ihrem System nicht vorhanden:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<location filename="../../../scribus/scribus.cpp" line="3771"/>
<source> was replaced by: </source>
<translation> wurde ersetzt durch: </translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3800"/>
<location filename="../../../scribus/scribus.cpp" line="3803"/>
<source>(converted)</source>
<translation>(konvertiert)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>Filename and Path for Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>All Files (*)</source>
<translation type="unfinished">Alle Dateien (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4202"/>
<location filename="../../../scribus/scribus.cpp" line="4263"/>
<location filename="../../../scribus/scribus.cpp" line="7971"/>
<location filename="../../../scribus/scribus.cpp" line="8105"/>
<location filename="../../../scribus/scribus.cpp" line="8127"/>
<location filename="../../../scribus/scribus.cpp" line="4205"/>
<location filename="../../../scribus/scribus.cpp" line="4266"/>
<location filename="../../../scribus/scribus.cpp" line="7978"/>
<location filename="../../../scribus/scribus.cpp" line="8112"/>
<location filename="../../../scribus/scribus.cpp" line="8134"/>
<source>Cannot write the file:
%1</source>
<translation>Die Datei %1 kann nicht geschrieben werden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4248"/>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="4251"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>Save As</source>
<translation>Speichern unter</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4277"/>
<location filename="../../../scribus/scribus.cpp" line="4280"/>
<source>Saving...</source>
<translation>Speichere...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4533"/>
<location filename="../../../scribus/scribus.cpp" line="7824"/>
<location filename="../../../scribus/scribus.cpp" line="4536"/>
<location filename="../../../scribus/scribus.cpp" line="7831"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Scribus hat einige Fehler festgestellt. Sie sollten die Druckvorstufenüberprüfung verwenden, um sie zu korrigieren</translation>
</message>
38415,39 → 38456,39
<translation type="obsolete">A&amp;bbruch</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4566"/>
<location filename="../../../scribus/scribus.cpp" line="4569"/>
<source>Printing...</source>
<translation>Drucke...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1839"/>
<location filename="../../../scribus/scribus.cpp" line="4570"/>
<location filename="../../../scribus/scribus.cpp" line="7939"/>
<location filename="../../../scribus/scribus.cpp" line="1842"/>
<location filename="../../../scribus/scribus.cpp" line="4573"/>
<location filename="../../../scribus/scribus.cpp" line="7946"/>
<source>Document</source>
<translation>Dokument</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4607"/>
<location filename="../../../scribus/scribus.cpp" line="4610"/>
<source>Printing failed!</source>
<translation>Drucken fehlgeschlagen!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>Cannot Cut In-Use Item</source>
<translation>Objekte in Benutzung können nicht ausgeschnitten werden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>Das Objekt %1 wird gerade im Story Editor bearbeitet, deswegen kann es nicht ausgeschnitten werden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5274"/>
<location filename="../../../scribus/scribus.cpp" line="5281"/>
<source>About Qt</source>
<translation>Über Qt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5285"/>
<location filename="../../../scribus/scribus.cpp" line="5292"/>
<source>Scribus Manual</source>
<translation>Scribus-Handbuch</translation>
</message>
38456,7 → 38497,7
<translation type="obsolete">Speichern unter</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<source>Text Files (*.txt);;All Files(*)</source>
<translation>Textdateien (*.txt);;Alle Dateien(*)</translation>
</message>
38469,33 → 38510,33
<translation type="obsolete">In Musterseite umwandeln</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>&amp;Size:</source>
<translation>&amp;Grösse:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>Size</source>
<translation>Grösse</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>&amp;Shade:</source>
<translation>Ton&amp;wert:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>Shade</source>
<translation>Tonwert</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6893"/>
<location filename="../../../scribus/scribus.cpp" line="6900"/>
<source>No Style</source>
<translation>Kein Stil</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7432"/>
<location filename="../../../scribus/scribus.cpp" line="7565"/>
<location filename="../../../scribus/scribus.cpp" line="7439"/>
<location filename="../../../scribus/scribus.cpp" line="7572"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation type="unfinished"></translation>
38509,12 → 38550,12
<translation type="obsolete">Ghostscript: Sie können weder EPS-Dateien noch die Druckvorschau verwenden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7860"/>
<location filename="../../../scribus/scribus.cpp" line="7867"/>
<source>All</source>
<translation>Alle</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7908"/>
<location filename="../../../scribus/scribus.cpp" line="7915"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation>Scribus hat Fehler entdeckt.
38526,7 → 38567,7
<translation type="obsolete">EPS-Dateien (*.eps);;Alle Dateien (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8005"/>
<location filename="../../../scribus/scribus.cpp" line="8012"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation>Scribus hat Fehler entdeckt.
38534,67 → 38575,67
diese zu finden und zu korrigieren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8101"/>
<location filename="../../../scribus/scribus.cpp" line="8108"/>
<source>-Page%1</source>
<translation>-Seite %1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8511"/>
<location filename="../../../scribus/scribus.cpp" line="8518"/>
<source>Some objects are locked.</source>
<translation>Einige Objekte sind gesperrt.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8507"/>
<location filename="../../../scribus/scribus.cpp" line="8514"/>
<source>&amp;Lock All</source>
<translation>Alle &amp;sperren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7710"/>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<source>Ghostscript is not installed on your system, or Scribus is not configured with the path to the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7713"/>
<location filename="../../../scribus/scribus.cpp" line="7720"/>
<source>Until this is remedied, you cannot import EPS images or use Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7715"/>
<location filename="../../../scribus/scribus.cpp" line="7722"/>
<source>Until this is remedied, you cannot import EPS images or use PostScript Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<location filename="../../../scribus/scribus.cpp" line="7724"/>
<source>Please read our &lt;a href=&quot;http://wiki.scribus.net/index.php/Ghostscript&quot;&gt;help and installation instructions&lt;/a&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7721"/>
<location filename="../../../scribus/scribus.cpp" line="7728"/>
<source>Ghostscript is missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8142"/>
<location filename="../../../scribus/scribus.cpp" line="8149"/>
<source>Locate your PDF viewer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8508"/>
<location filename="../../../scribus/scribus.cpp" line="8515"/>
<source>&amp;Unlock All</source>
<translation>Alle &amp;entsperren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>The program %1 is already running!</source>
<translation>Das Programm %1 läuft schon!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9271"/>
<location filename="../../../scribus/scribus.cpp" line="9278"/>
<source>The program %1 is missing!</source>
<translation>Das Programm %1 fehlt!</translation>
</message>
38627,14 → 38668,14
<translation type="obsolete">&amp;Werkzeuge</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9386"/>
<location filename="../../../scribus/scribus.cpp" line="1009"/>
<location filename="../../../scribus/scribus.cpp" line="9393"/>
<source>X-Pos:</source>
<translation>X-Pos:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1011"/>
<location filename="../../../scribus/scribus.cpp" line="9387"/>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9394"/>
<source>Y-Pos:</source>
<translation>Y-Pos:</translation>
</message>
38647,43 → 38688,43
<translation type="obsolete">Ghostscript: Sie können weder EPS-Dateien noch die Druckvorschau verwenden</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7770"/>
<location filename="../../../scribus/scribus.cpp" line="7777"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation>Ghostscript fehlt: Die PostScript-Druckvorschau ist nicht verfügbar</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4044"/>
<location filename="../../../scribus/scribus.cpp" line="9608"/>
<location filename="../../../scribus/scribus.cpp" line="4047"/>
<location filename="../../../scribus/scribus.cpp" line="9615"/>
<source>Do you really want to replace your existing image?</source>
<translation>Wollen Sie das vorhandene Bild wirklich ersetzen?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="671"/>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<source>Contents</source>
<translation>Inhalt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="798"/>
<location filename="../../../scribus/scribus.cpp" line="797"/>
<source>&amp;Character</source>
<translation>&amp;Zeichen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="816"/>
<location filename="../../../scribus/scribus.cpp" line="815"/>
<source>&amp;Quote</source>
<translation>&amp;Anführungszeichen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="841"/>
<location filename="../../../scribus/scribus.cpp" line="840"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>&amp;Leerzeichen &amp;&amp; Umbrüche</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="855"/>
<location filename="../../../scribus/scribus.cpp" line="854"/>
<source>Liga&amp;ture</source>
<translation>Liga&amp;turen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<location filename="../../../scribus/scribus.cpp" line="669"/>
<source>Paste Recent</source>
<translation>Zuletzt verwendete Einfügen</translation>
</message>
38692,7 → 38733,7
<translation type="obsolete">Aktualisiere Bilder</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4246"/>
<location filename="../../../scribus/scribus.cpp" line="4249"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Dokumente (*.sla *.sla.gz);;Alle Dateien (*)</translation>
</message>
38705,7 → 38746,7
<translation type="obsolete">Gruppe%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3992"/>
<location filename="../../../scribus/scribus.cpp" line="3995"/>
<source>Do you really want to clear all your text?</source>
<translation>Wollen Sie wirklich den gesamten Text entfernen?</translation>
</message>
38715,17 → 38756,17
<translation>Scribus</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="955"/>
<location filename="../../../scribus/scribus.cpp" line="954"/>
<source>Online &amp;Tutorials</source>
<translation>Online &amp; Tutorien</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3765"/>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Einige Farbprofile, die in diesem Dokument verwendet werden, sind nicht installiert:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>%1;;All Files (*)</source>
<translation>%1;;Alle Dateien (*)</translation>
</message>
38735,8 → 38776,8
<translation>Wende benutzerdefinierte Kürzel an</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4200"/>
<location filename="../../../scribus/scribus.cpp" line="4261"/>
<location filename="../../../scribus/scribus.cpp" line="4203"/>
<location filename="../../../scribus/scribus.cpp" line="4264"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>Ihr Dokument wurde in einer temporären Datei gespeichert und kann nicht verschoben werden:
38743,13 → 38784,13
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4662"/>
<location filename="../../../scribus/scribus.cpp" line="4665"/>
<source>Print engine initialization failed</source>
<translation>Initialisierung des Druckers ist fehlgeschlagen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7589"/>
<location filename="../../../scribus/scribus.cpp" line="7666"/>
<location filename="../../../scribus/scribus.cpp" line="7596"/>
<location filename="../../../scribus/scribus.cpp" line="7673"/>
<source>Updating Images</source>
<translation>Aktualisiere Bilder</translation>
</message>
38762,27 → 38803,27
<translation type="obsolete">Alles im Dokument auswählen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3239"/>
<location filename="../../../scribus/scribus.cpp" line="3242"/>
<source>All Supported Formats</source>
<translation>Alle unterstützten Formate</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>New Entry</source>
<translation>Neuer Eintrag</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3582"/>
<location filename="../../../scribus/scribus.cpp" line="3585"/>
<source>Document is already opened</source>
<translation>Das Dokument ist bereits geöffnet</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3583"/>
<location filename="../../../scribus/scribus.cpp" line="3586"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation>Das Dokument wird bereits verwendet und wird nun angezeigt.</translation>
</message>
44484,12 → 44525,16
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="54"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="48"/>
<source>The minimum number is 1; the maximum is 100.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The minimum number is 1; the maximum us 100.</source>
<translation>Das Minimum ist 1, das Maximum 100.</translation>
<translation type="obsolete">Das Minimum ist 1, das Maximum 100.</translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="57"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="51"/>
<source>Number of Copied Items to Keep in Scrapbook:</source>
<translation>Anzahl der kopierten Objekte in der Bibliothek:</translation>
</message>