Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 14473 → Rev 14474

/trunk/Scribus/resources/translations/po/scribus.en_GB.ts
4,13 → 4,13
<context>
<name></name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="17"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation>getColorNames() -&gt; list
<translation type="unfinished">getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
17,7 → 17,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="27"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
27,7 → 27,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColor(&quot;name&quot;) -&gt; tuple
<translation type="unfinished">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
38,7 → 38,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="41"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
49,7 → 49,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColorAsRGB(&quot;name&quot;) -&gt; tuple
<translation type="unfinished">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
61,7 → 61,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="56"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
71,7 → 71,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>changeColour(&quot;name&quot;, c, m, y, k)
<translation type="unfinished">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
82,7 → 82,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="70"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
91,7 → 91,7
 
May raise ValueError if an invalid color name is specified.
</source>
<translation>defineColor(&quot;name&quot;, c, m, y, k)
<translation type="unfinished">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
101,7 → 101,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="83"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
114,7 → 114,7
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>deleteColor(&quot;name&quot;, &quot;replace&quot;)
<translation type="unfinished">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
128,7 → 128,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="100"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
136,7 → 136,7
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>replaceColor(&quot;name&quot;, &quot;replace&quot;)
<translation type="unfinished">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
145,7 → 145,31
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="113"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="128"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="17"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
152,7 → 176,7
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation>newDocDialog() -&gt; bool
<translation type="unfinished">newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
160,7 → 184,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="28"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
180,7 → 204,7
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
<translation type="unfinished">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
201,7 → 225,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="56"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
235,7 → 259,7
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation>messageBox(&quot;caption&quot;, &quot;message&quot;,
<translation type="unfinished">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
270,7 → 294,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="95"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
278,7 → 302,7
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation>valueDialog(caption, message [,defaultvalue]) -&gt; string
<translation type="unfinished">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
287,13 → 311,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="107"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation>newStyleDialog() -&gt; string
<translation type="unfinished">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
300,7 → 324,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="16"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
341,7 → 365,7
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation>newDocument(size, margins, orientation, firstPageNumber,
<translation type="unfinished">newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
383,7 → 407,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="62"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
419,7 → 443,7
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation>newDoc(size, margins, orientation, firstPageNumber,
<translation type="unfinished">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
456,7 → 480,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="103"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
463,7 → 487,7
 
May throw NoDocOpenError if there is no document to close
</source>
<translation>closeDoc()
<translation type="unfinished">closeDoc()
 
Closes the current document without prompting to save.
 
471,18 → 495,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="114"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation>haveDoc() -&gt; bool
<translation type="unfinished">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="123"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
489,7 → 513,7
 
May raise ScribusError if the document could not be opened.
</source>
<translation>openDoc(&quot;name&quot;)
<translation type="unfinished">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
497,7 → 521,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="134"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
506,7 → 530,7
 
If the save fails, there is currently no way to tell.
</source>
<translation>saveDoc()
<translation type="unfinished">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
516,7 → 540,16
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="146"/>
<source>getDocName() -&gt; string
 
Returns the name the document was saved under.
If the document was not saved before the name is empty.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="156"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
524,7 → 557,7
 
May raise ScribusError if the save fails.
</source>
<translation>saveDocAs(&quot;name&quot;)
<translation type="unfinished">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
533,13 → 566,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="168"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
<translation type="unfinished">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
546,14 → 579,33
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="178"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="189"/>
<source>setBaseLine(grid, offset)
 
Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation>setMargins(lr, rr, tr, br)
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
561,7 → 613,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="200"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
569,7 → 621,7
 
May raise ValueError if an invalid unit is passed.
</source>
<translation>setUnit(type)
<translation type="unfinished">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
578,7 → 630,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="212"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
585,7 → 637,7
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation>getUnit() -&gt; integer (Scribus unit constant)
<translation type="unfinished">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
593,13 → 645,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="223"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation>loadStylesFromFile(&quot;filename&quot;)
<translation type="unfinished">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
606,7 → 658,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
614,7 → 666,7
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation>setDocType(facingPages, firstPageLeft)
<translation type="unfinished">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
623,13 → 675,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="243"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation>closeMasterPage()
<translation type="unfinished">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
636,24 → 688,24
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="251"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation>masterPageNames()
<translation type="unfinished">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="258"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation>editMasterPage(pageName)
<translation type="unfinished">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
660,13 → 712,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="266"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation>createMasterPage(pageName)
<translation type="unfinished">createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
673,24 → 725,24
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="274"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation>deleteMasterPage(pageName)
<translation type="unfinished">deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="17"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillColor([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
697,13 → 749,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="27"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillTransparency([&quot;name&quot;]) -&gt; float
<translation type="unfinished">getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
710,13 → 762,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="37"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillBlendmode([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
723,13 → 775,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="47"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineColor([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
736,13 → 788,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="57"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineTransparency([&quot;name&quot;]) -&gt; float
<translation type="unfinished">getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
749,13 → 801,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="67"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineBlendmode([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
762,13 → 814,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="77"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineWidth([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
775,13 → 827,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="87"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineShade([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
788,7 → 840,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="97"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
795,7 → 847,7
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
<translation type="unfinished">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
803,7 → 855,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="108"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
810,7 → 862,7
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
<translation type="unfinished">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
818,7 → 870,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="119"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
825,7 → 877,7
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
<translation type="unfinished">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
833,13 → 885,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="130"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillShade([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
846,7 → 898,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="140"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
853,7 → 905,7
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getCornerRadius([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
861,13 → 913,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="151"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getImageScale([&quot;name&quot;]) -&gt; (x,y)
<translation type="unfinished">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
874,13 → 926,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="161"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getImageName([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
887,7 → 939,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="171"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
895,7 → 947,7
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation>getPosition([&quot;name&quot;]) -&gt; (x,y)
<translation type="unfinished">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
904,7 → 956,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="183"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
912,7 → 964,7
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation>getSize([&quot;name&quot;]) -&gt; (width,height)
<translation type="unfinished">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
921,7 → 973,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="195"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
928,7 → 980,7
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation>getRotation([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
936,18 → 988,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="206"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation>getAllObjects() -&gt; list
<translation type="unfinished">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="77"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
955,7 → 1007,7
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation>getPropertyCType(object, property, includesuper=True)
<translation type="unfinished">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
964,7 → 1016,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="96"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
971,7 → 1023,7
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation>getPropertyNames(object, includesuper=True)
<translation type="unfinished">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
979,7 → 1031,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="123"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
993,7 → 1045,7
 
The return value varies depending on the type of the property.
</source>
<translation>getProperty(object, property)
<translation type="unfinished">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
1008,7 → 1060,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="158"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
1017,7 → 1069,7
 
See getProperty() for more information.
</source>
<translation>setProperty(object, property, value)
<translation type="unfinished">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
1027,7 → 1079,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="17"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
1035,7 → 1087,7
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation>moveObject(dx, dy [, &quot;name&quot;])
<translation type="unfinished">moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
1044,7 → 1096,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="29"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
1052,7 → 1104,7
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation>moveObjectAbs(x, y [, &quot;name&quot;])
<translation type="unfinished">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
1061,7 → 1113,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="41"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
1070,7 → 1122,7
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>rotateObject(rot [, &quot;name&quot;])
<translation type="unfinished">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
1080,7 → 1132,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="54"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
1087,7 → 1139,7
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>rotateObjectAbs(rot [, &quot;name&quot;])
<translation type="unfinished">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
1095,13 → 1147,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="65"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>sizeObject(width, height [, &quot;name&quot;])
<translation type="unfinished">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
1108,7 → 1160,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="75"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
1115,7 → 1167,7
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation>getSelectedObject([nr]) -&gt; string
<translation type="unfinished">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
1123,40 → 1175,40
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="86"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation>selectionCount() -&gt; integer
<translation type="unfinished">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="95"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation>selectObject(&quot;name&quot;)
<translation type="unfinished">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="104"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation>deselectAll()
<translation type="unfinished">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="113"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
1163,7 → 1215,7
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation>groupObjects(list)
<translation type="unfinished">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
1171,16 → 1223,16
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="124"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation>unGroupObjects(&quot;name&quot;)
<translation type="unfinished">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="132"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
1191,7 → 1243,7
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation>scaleGroup(factor [,&quot;name&quot;])
<translation type="unfinished">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
1203,7 → 1255,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="147"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
1211,7 → 1263,7
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation>loadImage(&quot;filename&quot; [, &quot;name&quot;])
<translation type="unfinished">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
1220,11 → 1272,35
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="159"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="173"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
1239,7 → 1315,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="191"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="186"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
1246,7 → 1322,7
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation>lockObject([&quot;name&quot;]) -&gt; bool
<translation type="unfinished">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
1254,13 → 1330,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="201"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="197"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>isLocked([&quot;name&quot;]) -&gt; bool
<translation type="unfinished">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
1267,7 → 1343,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="213"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="206"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
1276,7 → 1352,7
 
May raise WrongFrameTypeError.
</source>
<translation>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
<translation type="unfinished">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
1286,7 → 1362,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="19"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
1293,7 → 1369,7
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation>setRedraw(bool)
<translation type="unfinished">setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
1301,24 → 1377,24
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="30"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation>getFontNames() -&gt; list
<translation type="unfinished">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="39"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation>getXFontNames() -&gt; list of tuples
<translation type="unfinished">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
1325,7 → 1401,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="52"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
1337,7 → 1413,7
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
<translation type="unfinished">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
1350,18 → 1426,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="68"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation>getLayers() -&gt; list
<translation type="unfinished">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="77"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
1369,7 → 1445,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setActiveLayer(&quot;name&quot;)
<translation type="unfinished">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
1378,18 → 1454,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="89"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation>getActiveLayer() -&gt; string
<translation type="unfinished">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="98"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
1398,7 → 1474,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
<translation type="unfinished">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
1408,7 → 1484,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="111"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
1417,7 → 1493,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerVisible(&quot;layer&quot;, visible)
<translation type="unfinished">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
1427,7 → 1503,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="124"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
1436,7 → 1512,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerPrintable(&quot;layer&quot;, printable)
<translation type="unfinished">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
1446,7 → 1522,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="137"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
1455,7 → 1531,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerLocked(&quot;layer&quot;, locked)
<translation type="unfinished">setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
1465,7 → 1541,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="150"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
1474,7 → 1550,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerOutlined(&quot;layer&quot;, outline)
<translation type="unfinished">setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
1484,7 → 1560,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="163"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
1493,7 → 1569,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerFlow(&quot;layer&quot;, flow)
<translation type="unfinished">setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
1503,7 → 1579,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="176"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
1511,7 → 1587,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerBlendmode(&quot;layer&quot;, blend)
<translation type="unfinished">setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
1520,7 → 1596,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="188"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
1528,7 → 1604,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerTransparency(&quot;layer&quot;, trans)
<translation type="unfinished">setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
1537,7 → 1613,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="200"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
1547,7 → 1623,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerVisible(&quot;layer&quot;) -&gt; bool
<translation type="unfinished">isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
1558,7 → 1634,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="214"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
1568,7 → 1644,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerPrintable(&quot;layer&quot;) -&gt; bool
<translation type="unfinished">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
1579,7 → 1655,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="228"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
1589,7 → 1665,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerLocked(&quot;layer&quot;) -&gt; bool
<translation type="unfinished">isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
1600,7 → 1676,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="242"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
1610,7 → 1686,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerOutlined(&quot;layer&quot;) -&gt; bool
<translation type="unfinished">isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
1621,7 → 1697,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="256"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
1630,7 → 1706,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerFlow(&quot;layer&quot;) -&gt; bool
<translation type="unfinished">isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
1640,7 → 1716,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="269"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
1648,7 → 1724,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerBlendmode(&quot;layer&quot;) -&gt; int
<translation type="unfinished">getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
1657,7 → 1733,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="281"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
1665,7 → 1741,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerTransparency(&quot;layer&quot;) -&gt; float
<translation type="unfinished">getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
1674,7 → 1750,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="293"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
1683,7 → 1759,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>deleteLayer(&quot;layer&quot;)
<translation type="unfinished">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
1693,7 → 1769,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="306"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
1700,7 → 1776,7
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>createLayer(layer)
<translation type="unfinished">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
1708,34 → 1784,34
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="317"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation>getGuiLanguage() -&gt; string
<translation type="unfinished">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="326"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation>moveSelectionToFront()Moves current selection to front.</translation>
<translation type="unfinished">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="335"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation>moveSelectionToFront()Moves current selection to back.</translation>
<translation type="unfinished">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="17"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
1746,7 → 1822,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
1758,7 → 1834,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="34"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
1769,7 → 1845,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
1781,7 → 1857,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="51"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
1792,7 → 1868,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
1804,7 → 1880,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="66"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
1815,7 → 1891,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
1827,7 → 1903,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="81"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
1838,7 → 1914,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
1850,7 → 1926,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="96"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
1864,7 → 1940,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolyLine(list, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
1879,7 → 1955,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="114"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
1895,7 → 1971,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolygon(list, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
1912,7 → 1988,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="134"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
1929,7 → 2005,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createBezierLine(list, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
1947,7 → 2023,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="155"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
1959,7 → 2035,7
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
<translation type="unfinished">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
1972,13 → 2048,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="173"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation>deleteObject([&quot;name&quot;])
<translation type="unfinished">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
1985,7 → 2061,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="184"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
1996,7 → 2072,7
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation>textFlowMode(&quot;name&quot; [, state])
<translation type="unfinished">textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
2008,7 → 2084,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="206"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
2015,7 → 2091,7
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation>objectExists([&quot;name&quot;]) -&gt; bool
<translation type="unfinished">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
2023,13 → 2099,22
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="223"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If object name is
given, style is applied to the current text selection in object &quot;name&quot;.
If no object name is given, style is applied on selected object.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation>setStyle(&quot;style&quot; [, &quot;name&quot;])
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
2036,29 → 2121,29
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="238"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation>getAllStyles() -&gt; list
<translation type="unfinished">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="250"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation>duplicateObject([&quot;name&quot;]) -&gt; string
<translation type="unfinished">duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="17"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
2069,7 → 2154,7
 
May raise IndexError if the page number is out of range
</source>
<translation>newPage(where [,&quot;masterpage&quot;])
<translation type="unfinished">newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
2081,13 → 2166,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="32"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation>currentPage() -&gt; integer
<translation type="unfinished">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
2094,29 → 2179,29
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="42"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation>redrawAll()
<translation type="unfinished">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="51"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation>getPageType() -&gt; integer
<translation type="unfinished">getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="60"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
2123,7 → 2208,7
 
May raise ScribusError if the save failed.
</source>
<translation>savePageAsEPS(&quot;name&quot;)
<translation type="unfinished">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
2131,7 → 2216,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="71"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
2140,7 → 2225,7
 
May raise IndexError if the page number is out of range
</source>
<translation>deletePage(nr)
<translation type="unfinished">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
2150,7 → 2235,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="84"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
2159,7 → 2244,7
 
May raise IndexError if the page number is out of range.
</source>
<translation>gotoPage(nr)
<translation type="unfinished">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
2169,24 → 2254,24
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="97"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation>pageCount() -&gt; integer
<translation type="unfinished">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="106"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation>getHGuides() -&gt; list
<translation type="unfinished">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
2193,7 → 2278,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="116"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
2202,7 → 2287,7
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation>setHGuides(list)
<translation type="unfinished">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
2212,35 → 2297,35
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="129"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation>getVGuides()
<translation type="unfinished">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="138"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation>setVGuides()
<translation type="unfinished">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation>getPageSize() -&gt; tuple
<translation type="unfinished">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
2247,7 → 2332,25
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
2255,7 → 2358,7
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation>getPageItems() -&gt; list
<translation type="unfinished">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
2264,13 → 2367,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation>getPageMargins()
<translation type="unfinished">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
2277,7 → 2380,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
2287,10 → 2390,10
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
<translation type="unfinished">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="17"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
2297,7 → 2400,7
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation>setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
<translation type="unfinished">setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
2305,7 → 2408,17
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="44"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="28"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="39"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
2312,7 → 2425,7
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>setFillColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="unfinished">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
2320,13 → 2433,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="54"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="50"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillTransparency(transparency, [&quot;name&quot;])
<translation type="unfinished">setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
2333,13 → 2446,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="64"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="60"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillBlendmode(blendmode, [&quot;name&quot;])
<translation type="unfinished">setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
2346,13 → 2459,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="74"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="70"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>setLineColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="unfinished">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
2359,13 → 2472,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="84"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="80"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineTransparency(transparency, [&quot;name&quot;])
<translation type="unfinished">setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
2372,13 → 2485,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="94"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="90"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineBlendmode(blendmode, [&quot;name&quot;])
<translation type="unfinished">setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
2385,7 → 2498,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="107"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="100"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
2394,7 → 2507,7
 
May raise ValueError if the line width is out of bounds.
</source>
<translation>setLineWidth(width, [&quot;name&quot;])
<translation type="unfinished">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
2404,7 → 2517,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="113"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
2414,7 → 2527,7
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation>setLineShade(shade, [&quot;name&quot;])
<translation type="unfinished">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2425,7 → 2538,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="127"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
2432,7 → 2545,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation>setLineJoin(join, [&quot;name&quot;])
<translation type="unfinished">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
2440,7 → 2553,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="138"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
2447,7 → 2560,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation>setLineEnd(endtype, [&quot;name&quot;])
<translation type="unfinished">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
2455,7 → 2568,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="154"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="149"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
2462,7 → 2575,7
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation>setLineStyle(style, [&quot;name&quot;])
<translation type="unfinished">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
2470,7 → 2583,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="168"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="160"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
2480,7 → 2593,7
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation>setFillShade(shade, [&quot;name&quot;])
<translation type="unfinished">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2491,7 → 2604,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="180"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="174"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
2499,7 → 2612,7
 
May raise ValueError if the corner radius is negative.
</source>
<translation>setCornerRadius(radius, [&quot;name&quot;])
<translation type="unfinished">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
2508,7 → 2621,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="192"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="186"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
2516,7 → 2629,7
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
<translation type="unfinished">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2525,7 → 2638,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdstyle.h" line="22"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
2569,10 → 2682,10
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation>createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
<translation type="unfinished">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdstyle.h" line="52"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
2630,10 → 2743,10
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation>createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
<translation type="unfinished">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="17"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
2641,7 → 2754,7
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFontSize([&quot;name&quot;]) -&gt; float
<translation type="unfinished">getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
2650,7 → 2763,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="29"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
2658,7 → 2771,7
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getFont([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
2667,13 → 2780,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="41"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLength([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2680,13 → 2793,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="51"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLines([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2693,7 → 2806,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="61"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
2701,7 → 2814,7
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getText([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
2710,7 → 2823,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="73"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
2718,7 → 2831,7
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>getAllText([&quot;name&quot;]) -&gt; string
<translation type="unfinished">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
2727,13 → 2840,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="85"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineSpacing([&quot;name&quot;]) -&gt; float
<translation type="unfinished">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
2740,7 → 2853,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="95"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
2747,16 → 2860,16
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
<translation type="unfinished">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="106"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getColumnGap([&quot;name&quot;]) -&gt; float
<translation type="unfinished">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
2763,13 → 2876,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="116"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getColumns([&quot;name&quot;]) -&gt; integer
<translation type="unfinished">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
2776,7 → 2889,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="126"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
2784,7 → 2897,7
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setText(&quot;text&quot;, [&quot;name&quot;])
<translation type="unfinished">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
2793,7 → 2906,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="138"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
2803,7 → 2916,7
 
May throw IndexError for an insertion out of bounds.
</source>
<translation>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
<translation type="unfinished">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
2814,7 → 2927,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="152"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
2823,7 → 2936,7
 
May throw ValueError if the font cannot be found.
</source>
<translation>setFont(&quot;font&quot;, [&quot;name&quot;])
<translation type="unfinished">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
2833,7 → 2946,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="165"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
2843,7 → 2956,7
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation>setFontSize(size, [&quot;name&quot;])
<translation type="unfinished">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
2854,7 → 2967,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="179"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
2863,7 → 2976,7
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation>setLineSpacing(size, [&quot;name&quot;])
<translation type="unfinished">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
2873,7 → 2986,20
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="192"/>
<source>setLineSpacingMode(mode, [&quot;name&quot;])
 
Sets the line spacing mode of the text frame &quot;name&quot; to &quot;mode&quot;.
If &quot;name&quot; is not given the currently selected
item is used.
Mode values are the same as in createParagraphStyle.
 
May throw ValueError if the mode is out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="206"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
2882,10 → 3008,10
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation>setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
<translation type="unfinished">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="219"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
2893,7 → 3019,7
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation>setColumnGap(size, [&quot;name&quot;])
<translation type="unfinished">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
2902,7 → 3028,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="231"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
2910,7 → 3036,7
 
May throw ValueError if number of columns is not at least one.
</source>
<translation>setColumns(nr, [&quot;name&quot;])
<translation type="unfinished">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2919,7 → 3045,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="243"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
2928,7 → 3054,7
 
May throw ValueError for an invalid alignment constant.
</source>
<translation>setTextAlignment(align, [&quot;name&quot;])
<translation type="unfinished">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
2938,7 → 3064,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="256"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
2948,7 → 3074,7
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation>selectText(start, count, [&quot;name&quot;])
<translation type="unfinished">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
2959,7 → 3085,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="270"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
2966,7 → 3092,7
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>deleteText([&quot;name&quot;])
<translation type="unfinished">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
2974,7 → 3100,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="281"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
2981,7 → 3107,7
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>setTextColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="unfinished">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
2989,13 → 3115,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
<translation type="unfinished">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
3002,7 → 3128,25
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="315"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="312"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="322"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
3011,7 → 3155,7
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setTextShade(shade, [&quot;name&quot;])
<translation type="unfinished">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
3021,7 → 3165,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="328"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="335"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
3030,7 → 3174,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
<translation type="unfinished">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
3040,7 → 3184,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="345"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
3049,7 → 3193,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation>unlinkTextFrames(&quot;name&quot;)
<translation type="unfinished">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
3059,18 → 3203,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="358"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="369"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation>traceText([&quot;name&quot;])
<translation type="unfinished">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="372"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="380"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
3079,7 → 3223,7
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
<translation type="unfinished">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
3089,7 → 3233,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="385"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="393"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
3097,10 → 3241,10
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
<translation type="unfinished">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="399"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="407"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
3108,10 → 3252,10
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
<translation type="unfinished">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="414"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="422"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
3119,7 → 3263,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
<translation type="unfinished">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
3128,7 → 3272,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="426"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="434"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
3136,7 → 3280,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>isPDFBookmark([&quot;name&quot;]) -&gt; bool
<translation type="unfinished">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
3145,13 → 3289,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="17"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation>messagebarText(&quot;string&quot;)
<translation type="unfinished">messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
3158,13 → 3302,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="30"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation>progressReset()
<translation type="unfinished">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
3171,13 → 3315,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="43"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation>progressTotal(max)
<translation type="unfinished">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
3184,7 → 3328,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="52"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
3195,7 → 3339,7
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation>progressSet(nr)
<translation type="unfinished">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
3207,18 → 3351,18
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="66"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation>setCursor()
<translation type="unfinished">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="78"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
3225,7 → 3369,7
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation>docChanged(bool)
<translation type="unfinished">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
3233,13 → 3377,13
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="91"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation>zoomDocument(double)
<translation type="unfinished">zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
3246,15 → 3390,15
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="103"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation>scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
<translation type="unfinished">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="15"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
3262,7 → 3406,7
 
If loading was successful, the selection contains the imported SVG
</source>
<translation>placeSVG(&quot;filename&quot;, x, y)
<translation type="unfinished">placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
3271,7 → 3415,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="27"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
3279,7 → 3423,7
 
If loading was successful, the selection contains the imported EPS
</source>
<translation>placeEPS(&quot;filename&quot;, x, y)
<translation type="unfinished">placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
3288,7 → 3432,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="39"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
3296,7 → 3440,7
 
If loading was successful, the selection contains the imported SXD
</source>
<translation>placeSXD(&quot;filename&quot;, x, y)
<translation type="unfinished">placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
3305,7 → 3449,7
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="51"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
3313,7 → 3457,7
 
If loading was successful, the selection contains the imported ODG
</source>
<translation>placeODG(&quot;filename&quot;, x, y)
<translation type="unfinished">placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
3321,88 → 3465,10
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="120"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="135"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="167"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="180"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
3415,7 → 3481,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
3430,7 → 3495,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
3443,7 → 3507,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
3460,7 → 3523,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
3475,7 → 3537,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
3498,7 → 3559,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
3521,7 → 3581,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
3536,7 → 3595,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
3553,7 → 3611,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
3566,7 → 3623,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
3649,7 → 3705,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
3666,7 → 3721,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
3687,7 → 3741,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
3710,7 → 3763,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
3731,7 → 3783,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
3758,7 → 3809,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
3775,7 → 3825,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
3844,7 → 3893,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
3861,7 → 3909,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
3876,7 → 3923,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
3887,7 → 3933,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
3902,7 → 3947,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
3921,7 → 3965,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
3938,7 → 3981,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
3955,7 → 3997,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
3970,7 → 4011,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
3983,7 → 4023,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
4000,7 → 4039,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
4013,7 → 4051,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
4026,7 → 4063,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
4039,7 → 4075,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
4054,7 → 4089,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
4069,7 → 4103,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
4082,7 → 4115,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
4095,7 → 4127,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
4108,7 → 4139,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
4125,7 → 4155,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
4140,7 → 4169,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
4151,7 → 4179,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
4168,7 → 4195,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
4183,7 → 4209,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
4212,7 → 4237,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
4231,7 → 4255,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
4248,7 → 4271,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
4261,7 → 4283,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
4276,7 → 4297,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
4287,7 → 4307,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
4298,7 → 4317,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
4309,7 → 4327,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
4324,7 → 4341,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
4333,7 → 4349,6
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
4356,7 → 4371,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
4373,7 → 4387,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
4392,7 → 4405,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
4407,7 → 4419,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
4420,7 → 4431,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
4439,7 → 4449,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
4450,7 → 4459,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
4463,7 → 4471,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
4488,7 → 4495,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
4499,7 → 4505,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
4516,7 → 4521,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
4527,7 → 4531,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
4546,7 → 4549,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
4565,7 → 4567,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
4586,7 → 4587,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
4605,7 → 4605,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
4620,7 → 4619,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
4631,7 → 4629,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
4654,7 → 4651,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
4677,7 → 4673,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
4700,7 → 4695,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
4723,7 → 4717,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
4752,7 → 4745,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
4785,7 → 4777,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
4820,7 → 4811,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
4845,7 → 4835,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
4858,7 → 4847,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
4873,7 → 4861,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
4886,7 → 4873,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
4897,7 → 4883,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
4910,7 → 4895,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
4921,7 → 4905,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
4936,7 → 4919,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
4955,7 → 4937,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
4966,7 → 4947,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
4979,7 → 4959,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
4998,7 → 4977,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
5009,7 → 4987,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
5020,7 → 4997,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
5033,7 → 5009,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
5050,7 → 5025,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
5063,7 → 5037,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
5078,7 → 5051,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
5091,7 → 5063,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
5110,7 → 5081,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
5131,7 → 5101,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
5146,7 → 5115,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
5161,7 → 5129,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
5176,7 → 5143,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
5197,7 → 5163,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
5214,7 → 5179,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
5231,7 → 5195,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
5248,7 → 5211,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
5261,7 → 5223,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
5278,7 → 5239,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
5295,7 → 5255,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
5308,7 → 5267,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
5321,7 → 5279,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
5334,7 → 5291,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
5351,7 → 5307,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
5370,7 → 5325,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
5391,7 → 5345,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
5410,7 → 5363,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
5427,7 → 5379,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
5444,7 → 5395,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
5463,7 → 5413,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
5484,7 → 5433,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
5499,7 → 5447,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
5514,7 → 5461,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
5527,7 → 5473,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
5546,7 → 5491,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
5565,7 → 5509,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
5584,7 → 5527,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
5595,7 → 5537,6
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
5614,7 → 5555,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
5631,7 → 5571,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
5644,7 → 5583,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
5657,7 → 5595,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
5680,7 → 5617,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
5691,7 → 5627,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
5706,7 → 5641,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
5719,7 → 5653,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
5792,7 → 5725,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
5805,7 → 5737,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
5816,7 → 5747,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
5829,7 → 5759,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
5842,7 → 5771,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
5853,7 → 5781,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
5866,7 → 5793,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
5879,7 → 5805,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
5892,7 → 5817,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
5905,7 → 5829,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
5918,7 → 5841,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
5937,7 → 5859,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
5958,7 → 5879,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
5979,7 → 5899,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
5998,7 → 5917,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
6015,7 → 5933,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
6032,7 → 5949,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
6055,7 → 5971,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
6066,7 → 5981,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
6079,7 → 5993,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
6090,7 → 6003,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
6103,7 → 6015,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
6122,7 → 6033,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
6137,7 → 6047,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
6154,7 → 6063,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
6169,7 → 6077,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
6188,7 → 6095,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
6209,7 → 6115,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
6230,7 → 6135,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
6245,7 → 6149,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
6264,7 → 6167,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
6283,7 → 6185,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
6300,7 → 6201,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
6317,7 → 6217,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
6330,7 → 6229,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
6343,7 → 6241,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
6356,7 → 6253,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
6369,7 → 6265,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
6386,7 → 6281,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
6403,7 → 6297,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
6420,7 → 6313,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
6461,7 → 6353,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
6476,7 → 6367,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
6495,7 → 6385,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
6514,7 → 6403,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
6531,7 → 6419,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
6539,7 → 6426,6
<translation type="obsolete">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
6547,7 → 6433,6
<translation type="obsolete">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
6560,7 → 6445,6
<translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
6621,7 → 6505,6
<translation type="obsolete">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
6632,7 → 6515,6
<translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
6643,7 → 6525,6
<translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
6651,7 → 6532,6
<translation type="obsolete">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
6698,7 → 6578,6
<translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
6708,7 → 6587,6
<translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
6723,22 → 6601,22
<context>
<name>AIPlug</name>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="129"/>
<source>Importing: %1</source>
<translation>Importing: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="132"/>
<source>Analyzing File:</source>
<translation>Analysing File:</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="265"/>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="296"/>
<source>Group%1</source>
<translation>Group%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2469"/>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="2563"/>
<source>Generating Items</source>
<translation>Generating Items</translation>
</message>
6746,222 → 6624,224
<context>
<name>About</name>
<message>
<location filename="../../scribus/about.cpp" line="305"/>
<location filename="../../../scribus/ui/about.cpp" line="305"/>
<source>Contributions from:</source>
<translation>Contributions from:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="188"/>
<location filename="../../../scribus/ui/about.cpp" line="188"/>
<source>&amp;About</source>
<translation>&amp;About</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="201"/>
<location filename="../../../scribus/ui/about.cpp" line="201"/>
<source>A&amp;uthors</source>
<translation>A&amp;uthors</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="215"/>
<location filename="../../../scribus/ui/about.cpp" line="215"/>
<source>&amp;Translations</source>
<translation>&amp;Translations</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="226"/>
<location filename="../../../scribus/ui/about.cpp" line="226"/>
<source>&amp;Online</source>
<translation>&amp;Online</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="265"/>
<location filename="../../../scribus/ui/about.cpp" line="265"/>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="297"/>
<location filename="../../../scribus/ui/about.cpp" line="297"/>
<source>Development Team:</source>
<translation>Development Team:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="307"/>
<location filename="../../../scribus/ui/about.cpp" line="307"/>
<source>Official Documentation:</source>
<translation>Official Documentation:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="311"/>
<location filename="../../../scribus/ui/about.cpp" line="311"/>
<source>Other Documentation:</source>
<translation>Other Documentation:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="345"/>
<location filename="../../../scribus/ui/about.cpp" line="345"/>
<source>Homepage</source>
<translation>Homepage</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="347"/>
<location filename="../../../scribus/ui/about.cpp" line="347"/>
<source>Online Reference</source>
<translation>Online Reference</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="351"/>
<location filename="../../../scribus/ui/about.cpp" line="351"/>
<source>Bugs and Feature Requests</source>
<translation>Bugs and Feature Requests</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="355"/>
<location filename="../../../scribus/ui/about.cpp" line="355"/>
<source>Mailing List</source>
<translation>Mailing List</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="329"/>
<location filename="../../../scribus/ui/about.cpp" line="329"/>
<source>Official Translations and Translators:</source>
<translation>Official Translations and Translators:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="331"/>
<location filename="../../../scribus/ui/about.cpp" line="331"/>
<source>Previous Translation Contributors:</source>
<translation>Previous Translation Contributors:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="97"/>
<location filename="../../../scribus/ui/about.cpp" line="97"/>
<source>About Scribus %1</source>
<translation>About Scribus %1</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="349"/>
<location filename="../../../scribus/ui/about.cpp" line="349"/>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="125"/>
<location filename="../../../scribus/ui/about.cpp" line="125"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="133"/>
<location filename="../../../scribus/ui/about.cpp" line="133"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="183"/>
<location filename="../../../scribus/ui/about.cpp" line="183"/>
<source>Using Ghostscript version %1</source>
<translation>Using Ghostscript version %1</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="185"/>
<location filename="../../../scribus/ui/about.cpp" line="185"/>
<source>No Ghostscript version available</source>
<translation>No Ghostscript version available</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<location filename="../../../scribus/ui/about.cpp" line="186"/>
<source>Build ID:</source>
<translation>Build ID:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="299"/>
<location filename="../../../scribus/ui/about.cpp" line="299"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="303"/>
<location filename="../../../scribus/ui/about.cpp" line="303"/>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="317"/>
<location filename="../../../scribus/ui/about.cpp" line="317"/>
<source>Tango Project Icons:</source>
<translation>Tango Project Icons:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="229"/>
<location filename="../../../scribus/ui/about.cpp" line="229"/>
<source>&amp;Updates</source>
<translation>&amp;Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="0"/>
<source>Check for &amp;Updates</source>
<translation type="obsolete">Check for &amp;Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="277"/>
<location filename="../../../scribus/ui/about.cpp" line="277"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Check for updates to Scribus. No data from your machine will be transferred off it.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="301"/>
<location filename="../../../scribus/ui/about.cpp" line="301"/>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="315"/>
<location filename="../../../scribus/ui/about.cpp" line="315"/>
<source>Splash Screen:</source>
<translation>Splash Screen:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="273"/>
<location filename="../../../scribus/ui/about.cpp" line="273"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>This panel shows the version, build date and compiled in library support in Scribus.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="274"/>
<location filename="../../../scribus/ui/about.cpp" line="274"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="275"/>
<location filename="../../../scribus/ui/about.cpp" line="275"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="276"/>
<location filename="../../../scribus/ui/about.cpp" line="276"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>The Windows version does not use fontconfig or CUPS libraries.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<location filename="../../../scribus/ui/about.cpp" line="186"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<location filename="../../../scribus/ui/about.cpp" line="186"/>
<source>Scribus Version</source>
<translation>Scribus Version</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="649"/>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="649"/>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="647"/>
<location filename="../../../scribus/ui/about.cpp" line="647"/>
<source>Abort Update Check</source>
<translation>Abort Update Check</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="353"/>
<location filename="../../../scribus/ui/about.cpp" line="353"/>
<source>Developer Blog</source>
<translation>Developer Blog</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="240"/>
<location filename="../../../scribus/ui/about.cpp" line="240"/>
<source>&amp;Licence</source>
<translation>&amp;Licence</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="249"/>
<location filename="../../../scribus/ui/about.cpp" line="249"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="309"/>
<location filename="../../../scribus/ui/about.cpp" line="309"/>
<source>Doc Translators:</source>
<translation>Doc Translators:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="313"/>
<location filename="../../../scribus/ui/about.cpp" line="313"/>
<source>Webmasters:</source>
<translation>Webmasters:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="625"/>
<location filename="../../../scribus/ui/about.cpp" line="447"/>
<location filename="../../../scribus/ui/about.cpp" line="559"/>
<location filename="../../../scribus/ui/about.cpp" line="625"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</translation>
</message>
6969,47 → 6849,47
<context>
<name>AboutPlugins</name>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="68"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation>Filename:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="69"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation>Version:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="72"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation>Enabled:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="73"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation>Release Date:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="80"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation>Description:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="81"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation>Author(s):</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="82"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation>Copyright:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="83"/>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation>License:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<location filename="../../../scribus/ui/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: About Plug-ins</translation>
</message>
7017,1403 → 6897,1413
<context>
<name>ActionManager</name>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<location filename="../../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Image Effects</source>
<translation>&amp;Image Effects</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<location filename="../../../scribus/actionmanager.cpp" line="1350"/>
<source>&amp;Tabulators...</source>
<translation>&amp;Tabulators...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<location filename="../../../scribus/actionmanager.cpp" line="1268"/>
<source>&amp;New</source>
<translation>&amp;New</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
<location filename="../../../scribus/actionmanager.cpp" line="1270"/>
<source>&amp;Open...</source>
<translation>&amp;Open...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<location filename="../../../scribus/actionmanager.cpp" line="1271"/>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<location filename="../../../scribus/actionmanager.cpp" line="1272"/>
<source>&amp;Save</source>
<translation>&amp;Save</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<location filename="../../../scribus/actionmanager.cpp" line="1273"/>
<source>Save &amp;As...</source>
<translation>Save &amp;As...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<location filename="../../../scribus/actionmanager.cpp" line="1274"/>
<source>Re&amp;vert to Saved</source>
<translation>Re&amp;vert to Saved</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<location filename="../../../scribus/actionmanager.cpp" line="1275"/>
<source>Collect for O&amp;utput...</source>
<translation>Collect for O&amp;utput...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<location filename="../../../scribus/actionmanager.cpp" line="1276"/>
<source>Get Text...</source>
<translation>Get Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<location filename="../../../scribus/actionmanager.cpp" line="1277"/>
<source>Append &amp;Text...</source>
<translation>Append &amp;Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1267"/>
<location filename="../../../scribus/actionmanager.cpp" line="1278"/>
<source>Get Image...</source>
<translation>Get Image...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<location filename="../../../scribus/actionmanager.cpp" line="1281"/>
<source>Save &amp;Text...</source>
<translation>Save &amp;Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<location filename="../../../scribus/actionmanager.cpp" line="1283"/>
<source>Save as P&amp;DF...</source>
<translation>Save as P&amp;DF...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
<location filename="../../../scribus/actionmanager.cpp" line="1284"/>
<source>Document &amp;Setup...</source>
<translation>Document &amp;Setup...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<location filename="../../../scribus/actionmanager.cpp" line="1286"/>
<source>P&amp;references 150...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1287"/>
<source>&amp;Print...</source>
<translation>&amp;Print...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1277"/>
<location filename="../../../scribus/actionmanager.cpp" line="1289"/>
<source>&amp;Quit</source>
<translation>&amp;Quit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<location filename="../../../scribus/actionmanager.cpp" line="1291"/>
<source>&amp;Undo</source>
<translation>&amp;Undo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
<location filename="../../../scribus/actionmanager.cpp" line="1292"/>
<source>&amp;Redo</source>
<translation>&amp;Redo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<location filename="../../../scribus/actionmanager.cpp" line="1293"/>
<source>&amp;Item Action Mode</source>
<translation>&amp;Item Action Mode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<location filename="../../../scribus/actionmanager.cpp" line="1294"/>
<source>Cu&amp;t</source>
<translation>Cu&amp;t</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1285"/>
<location filename="../../../scribus/actionmanager.cpp" line="1295"/>
<location filename="../../../scribus/actionmanager.cpp" line="1297"/>
<source>&amp;Copy</source>
<translation>&amp;Copy</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1286"/>
<location filename="../../../scribus/actionmanager.cpp" line="1296"/>
<location filename="../../../scribus/actionmanager.cpp" line="1298"/>
<source>&amp;Paste</source>
<translation>&amp;Paste</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<location filename="../../../scribus/actionmanager.cpp" line="1301"/>
<source>Select &amp;All</source>
<translation>Select &amp;All</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1291"/>
<location filename="../../../scribus/actionmanager.cpp" line="1303"/>
<source>&amp;Deselect All</source>
<translation>&amp;Deselect All</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1292"/>
<location filename="../../../scribus/actionmanager.cpp" line="1304"/>
<source>&amp;Search/Replace...</source>
<translation>&amp;Search/Replace...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1295"/>
<location filename="../../../scribus/actionmanager.cpp" line="1307"/>
<source>C&amp;olors...</source>
<translation>C&amp;olours...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
<location filename="../../../scribus/actionmanager.cpp" line="1310"/>
<source>Gradients...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1312"/>
<source>&amp;Master Pages...</source>
<translation>&amp;Master Pages...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<location filename="../../../scribus/actionmanager.cpp" line="1285"/>
<source>P&amp;references...</source>
<translation>P&amp;references...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1307"/>
<location filename="../../../scribus/actionmanager.cpp" line="1320"/>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1309"/>
<location filename="../../../scribus/actionmanager.cpp" line="1322"/>
<source>&amp;Other...</source>
<translation>&amp;Other...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1310"/>
<location filename="../../../scribus/actionmanager.cpp" line="1323"/>
<source>&amp;Left</source>
<translation>&amp;Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1311"/>
<location filename="../../../scribus/actionmanager.cpp" line="1324"/>
<source>&amp;Center</source>
<translation>&amp;Centre</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1312"/>
<location filename="../../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Right</source>
<translation>&amp;Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1313"/>
<location filename="../../../scribus/actionmanager.cpp" line="1326"/>
<source>&amp;Block</source>
<translation>&amp;Block</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<location filename="../../../scribus/actionmanager.cpp" line="1327"/>
<source>&amp;Forced</source>
<translation>&amp;Forced</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>&amp;%1 %</source>
<translation type="obsolete">&amp;%1 %</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<location filename="../../../scribus/actionmanager.cpp" line="1338"/>
<source>&amp;Normal</source>
<translation>&amp;Normal</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<location filename="../../../scribus/actionmanager.cpp" line="1339"/>
<source>&amp;Underline</source>
<translation>&amp;Underline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<location filename="../../../scribus/actionmanager.cpp" line="1340"/>
<source>Underline &amp;Words</source>
<translation>Underline &amp;Words</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
<location filename="../../../scribus/actionmanager.cpp" line="1341"/>
<source>&amp;Strike Through</source>
<translation>&amp;Strike Through</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<location filename="../../../scribus/actionmanager.cpp" line="1342"/>
<source>&amp;All Caps</source>
<translation>&amp;All Caps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<location filename="../../../scribus/actionmanager.cpp" line="1343"/>
<source>Small &amp;Caps</source>
<translation>Small &amp;Caps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<location filename="../../../scribus/actionmanager.cpp" line="1344"/>
<source>Su&amp;perscript</source>
<translation>Su&amp;perscript</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<location filename="../../../scribus/actionmanager.cpp" line="1345"/>
<source>Su&amp;bscript</source>
<translation>Su&amp;bscript</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<location filename="../../../scribus/actionmanager.cpp" line="1353"/>
<source>D&amp;uplicate</source>
<translation>D&amp;uplicate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<location filename="../../../scribus/actionmanager.cpp" line="1354"/>
<source>&amp;Multiple Duplicate</source>
<translation>&amp;Multiple Duplicate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<location filename="../../../scribus/actionmanager.cpp" line="1355"/>
<source>&amp;Delete</source>
<translation>&amp;Delete</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<location filename="../../../scribus/actionmanager.cpp" line="1356"/>
<source>&amp;Group</source>
<translation>&amp;Group</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<location filename="../../../scribus/actionmanager.cpp" line="1357"/>
<source>&amp;Ungroup</source>
<translation>&amp;Ungroup</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<location filename="../../../scribus/actionmanager.cpp" line="1358"/>
<source>Is &amp;Locked</source>
<translation>Is &amp;Locked</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<location filename="../../../scribus/actionmanager.cpp" line="1359"/>
<source>Si&amp;ze is Locked</source>
<translation>Si&amp;ze is Locked</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<location filename="../../../scribus/actionmanager.cpp" line="1363"/>
<source>Lower to &amp;Bottom</source>
<translation>Lower to &amp;Bottom</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<location filename="../../../scribus/actionmanager.cpp" line="1364"/>
<source>Raise to &amp;Top</source>
<translation>Raise to &amp;Top</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<location filename="../../../scribus/actionmanager.cpp" line="1365"/>
<source>&amp;Lower</source>
<translation>&amp;Lower</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<location filename="../../../scribus/actionmanager.cpp" line="1366"/>
<source>&amp;Raise</source>
<translation>&amp;Raise</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<location filename="../../../scribus/actionmanager.cpp" line="1367"/>
<source>Send to S&amp;crapbook</source>
<translation>Send to S&amp;crapbook</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<location filename="../../../scribus/actionmanager.cpp" line="1369"/>
<source>&amp;Attributes...</source>
<translation>&amp;Attributes...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<location filename="../../../scribus/actionmanager.cpp" line="1371"/>
<source>I&amp;mage Visible</source>
<translation>I&amp;mage Visible</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<location filename="../../../scribus/actionmanager.cpp" line="1379"/>
<source>Is PDF &amp;Bookmark</source>
<translation>Is PDF &amp;Bookmark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<location filename="../../../scribus/actionmanager.cpp" line="1380"/>
<source>Is PDF A&amp;nnotation</source>
<translation>Is PDF A&amp;nnotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<location filename="../../../scribus/actionmanager.cpp" line="1381"/>
<source>Annotation P&amp;roperties</source>
<translation>Annotation P&amp;roperties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1369"/>
<location filename="../../../scribus/actionmanager.cpp" line="1382"/>
<source>Field P&amp;roperties</source>
<translation>Field P&amp;roperties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1370"/>
<location filename="../../../scribus/actionmanager.cpp" line="1383"/>
<source>&amp;Edit Shape...</source>
<translation>&amp;Edit Shape...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<location filename="../../../scribus/actionmanager.cpp" line="1384"/>
<source>&amp;Attach Text to Path</source>
<translation>&amp;Attach Text to Path</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<location filename="../../../scribus/actionmanager.cpp" line="1385"/>
<source>&amp;Detach Text from Path</source>
<translation>&amp;Detach Text from Path</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<location filename="../../../scribus/actionmanager.cpp" line="1386"/>
<source>&amp;Combine Polygons</source>
<translation>&amp;Combine Polygons</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<location filename="../../../scribus/actionmanager.cpp" line="1387"/>
<source>Split &amp;Polygons</source>
<translation>Split &amp;Polygons</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<location filename="../../../scribus/actionmanager.cpp" line="1388"/>
<source>&amp;Bezier Curve</source>
<translation>&amp;Bezier Curve</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
<location filename="../../../scribus/actionmanager.cpp" line="1389"/>
<source>&amp;Image Frame</source>
<translation>&amp;Image Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<location filename="../../../scribus/actionmanager.cpp" line="1391"/>
<source>&amp;Polygon</source>
<translation>&amp;Polygon</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<location filename="../../../scribus/actionmanager.cpp" line="1392"/>
<source>&amp;Text Frame</source>
<translation>&amp;Text Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<location filename="../../../scribus/actionmanager.cpp" line="1396"/>
<source>&amp;Glyph...</source>
<translation>&amp;Glyph...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<location filename="../../../scribus/actionmanager.cpp" line="1397"/>
<source>Sample Text</source>
<translation>Sample Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<location filename="../../../scribus/actionmanager.cpp" line="1401"/>
<source>&amp;Insert...</source>
<translation>&amp;Insert...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<location filename="../../../scribus/actionmanager.cpp" line="1402"/>
<source>Im&amp;port...</source>
<translation>Im&amp;port...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<location filename="../../../scribus/actionmanager.cpp" line="1403"/>
<source>&amp;Delete...</source>
<translation>&amp;Delete...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<location filename="../../../scribus/actionmanager.cpp" line="1404"/>
<source>&amp;Copy...</source>
<translation>&amp;Copy...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<location filename="../../../scribus/actionmanager.cpp" line="1405"/>
<source>&amp;Move...</source>
<translation>&amp;Move...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<location filename="../../../scribus/actionmanager.cpp" line="1406"/>
<source>&amp;Apply Master Page...</source>
<translation>&amp;Apply Master Page...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
<location filename="../../../scribus/actionmanager.cpp" line="1408"/>
<source>Manage &amp;Guides...</source>
<translation>Manage &amp;Guides...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<location filename="../../../scribus/actionmanager.cpp" line="1414"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<location filename="../../../scribus/actionmanager.cpp" line="1415"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<location filename="../../../scribus/actionmanager.cpp" line="1416"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<location filename="../../../scribus/actionmanager.cpp" line="1417"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
<location filename="../../../scribus/actionmanager.cpp" line="1420"/>
<source>Show &amp;Margins</source>
<translation>Show &amp;Margins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1409"/>
<location filename="../../../scribus/actionmanager.cpp" line="1422"/>
<source>Show &amp;Frames</source>
<translation>Show &amp;Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<location filename="../../../scribus/actionmanager.cpp" line="1424"/>
<source>Show &amp;Images</source>
<translation>Show &amp;Images</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1412"/>
<location filename="../../../scribus/actionmanager.cpp" line="1425"/>
<source>Show &amp;Grid</source>
<translation>Show &amp;Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1413"/>
<location filename="../../../scribus/actionmanager.cpp" line="1426"/>
<source>Show G&amp;uides</source>
<translation>Show G&amp;uides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<location filename="../../../scribus/actionmanager.cpp" line="1428"/>
<source>Show &amp;Baseline Grid</source>
<translation>Show &amp;Baseline Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<location filename="../../../scribus/actionmanager.cpp" line="1429"/>
<source>Show &amp;Text Chain</source>
<translation>Show &amp;Text Chain</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<location filename="../../../scribus/actionmanager.cpp" line="1433"/>
<source>Sn&amp;ap to Grid</source>
<translation>Sn&amp;ap to Grid</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<location filename="../../../scribus/actionmanager.cpp" line="1434"/>
<source>Sna&amp;p to Guides</source>
<translation>Sna&amp;p to Guides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<location filename="../../../scribus/actionmanager.cpp" line="1439"/>
<source>&amp;Properties</source>
<translation>&amp;Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<location filename="../../../scribus/actionmanager.cpp" line="1441"/>
<source>&amp;Scrapbook</source>
<translation>&amp;Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<location filename="../../../scribus/actionmanager.cpp" line="1442"/>
<source>&amp;Layers</source>
<translation>&amp;Layers</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<location filename="../../../scribus/actionmanager.cpp" line="1444"/>
<source>&amp;Bookmarks</source>
<translation>&amp;Bookmarks</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<location filename="../../../scribus/actionmanager.cpp" line="1445"/>
<source>&amp;Measurements</source>
<translation>&amp;Measurements</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1433"/>
<location filename="../../../scribus/actionmanager.cpp" line="1446"/>
<source>Action &amp;History</source>
<translation>Action &amp;History</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<location filename="../../../scribus/actionmanager.cpp" line="1447"/>
<source>Preflight &amp;Verifier</source>
<translation>Preflight &amp;Verifier</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<location filename="../../../scribus/actionmanager.cpp" line="1449"/>
<source>&amp;Tools</source>
<translation>&amp;Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<location filename="../../../scribus/actionmanager.cpp" line="1450"/>
<source>P&amp;DF Tools</source>
<translation>P&amp;DF Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<location filename="../../../scribus/actionmanager.cpp" line="1453"/>
<source>Select Item</source>
<translation>Select Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<location filename="../../../scribus/actionmanager.cpp" line="1454"/>
<source>Rotate Item</source>
<translation>Rotate Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<location filename="../../../scribus/actionmanager.cpp" line="1455"/>
<source>Zoom in or out</source>
<translation>Zoom in or out</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
<location filename="../../../scribus/actionmanager.cpp" line="1456"/>
<source>Zoom in</source>
<translation>Zoom in</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<location filename="../../../scribus/actionmanager.cpp" line="1457"/>
<source>Zoom out</source>
<translation>Zoom out</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1445"/>
<location filename="../../../scribus/actionmanager.cpp" line="1458"/>
<source>Edit Contents of Frame</source>
<translation>Edit Contents of Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<location filename="../../../scribus/actionmanager.cpp" line="1460"/>
<source>Link Text Frames</source>
<translation>Link Text Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<location filename="../../../scribus/actionmanager.cpp" line="1461"/>
<source>Unlink Text Frames</source>
<translation>Unlink Text Frames</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
<location filename="../../../scribus/actionmanager.cpp" line="1462"/>
<source>&amp;Eye Dropper</source>
<translation>&amp;Eye Dropper</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<location filename="../../../scribus/actionmanager.cpp" line="1463"/>
<source>Copy Item Properties</source>
<translation>Copy Item Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">&amp;Manage Pictures</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<location filename="../../../scribus/actionmanager.cpp" line="1489"/>
<source>&amp;Hyphenate Text</source>
<translation>&amp;Hyphenate Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<location filename="../../../scribus/actionmanager.cpp" line="1491"/>
<source>&amp;Generate Table Of Contents</source>
<translation>&amp;Generate Table Of Contents</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1482"/>
<location filename="../../../scribus/actionmanager.cpp" line="1498"/>
<source>&amp;About Scribus</source>
<translation>&amp;About Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<location filename="../../../scribus/actionmanager.cpp" line="1500"/>
<source>About &amp;Qt</source>
<translation>About &amp;Qt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<location filename="../../../scribus/actionmanager.cpp" line="1501"/>
<source>Toolti&amp;ps</source>
<translation>Toolti&amp;ps</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1487"/>
<location filename="../../../scribus/actionmanager.cpp" line="1503"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribus &amp;Manual...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<location filename="../../../scribus/actionmanager.cpp" line="1521"/>
<source>Smart &amp;Hyphen</source>
<translation>Smart &amp;Hyphen</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<location filename="../../../scribus/actionmanager.cpp" line="1523"/>
<source>Non Breaking &amp;Space</source>
<translation>Non Breaking &amp;Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
<location filename="../../../scribus/actionmanager.cpp" line="1524"/>
<source>Page &amp;Number</source>
<translation>Page &amp;Number</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<location filename="../../../scribus/actionmanager.cpp" line="1531"/>
<source>Copyright</source>
<translation>Copyright</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<location filename="../../../scribus/actionmanager.cpp" line="1532"/>
<source>Registered Trademark</source>
<translation>Registered Trademark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<location filename="../../../scribus/actionmanager.cpp" line="1533"/>
<source>Trademark</source>
<translation>Trademark</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<location filename="../../../scribus/actionmanager.cpp" line="1535"/>
<source>Bullet</source>
<translation>Bullet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<location filename="../../../scribus/actionmanager.cpp" line="1537"/>
<source>Em Dash</source>
<translation>Em Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<location filename="../../../scribus/actionmanager.cpp" line="1538"/>
<source>En Dash</source>
<translation>En Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<location filename="../../../scribus/actionmanager.cpp" line="1539"/>
<source>Figure Dash</source>
<translation>Figure Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<location filename="../../../scribus/actionmanager.cpp" line="1540"/>
<source>Quotation Dash</source>
<translation>Quotation Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<location filename="../../../scribus/actionmanager.cpp" line="1511"/>
<source>Toggle Palettes</source>
<translation>Toggle Palettes</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<location filename="../../../scribus/actionmanager.cpp" line="1347"/>
<source>S&amp;hadow</source>
<translation>S&amp;hadow</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<location filename="../../../scribus/actionmanager.cpp" line="1376"/>
<source>&amp;Low Resolution</source>
<translation>&amp;Low Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1364"/>
<location filename="../../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Normal Resolution</source>
<translation>&amp;Normal Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1365"/>
<location filename="../../../scribus/actionmanager.cpp" line="1378"/>
<source>&amp;Full Resolution</source>
<translation>&amp;Full Resolution</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1293"/>
<location filename="../../../scribus/actionmanager.cpp" line="1305"/>
<source>Edit Image...</source>
<translation>Edit Image...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
<location filename="../../../scribus/actionmanager.cpp" line="1372"/>
<source>&amp;Update Image</source>
<translation>&amp;Update Image</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<location filename="../../../scribus/actionmanager.cpp" line="1373"/>
<source>Adjust Frame to Image</source>
<translation>Adjust Frame to Image</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<location filename="../../../scribus/actionmanager.cpp" line="1375"/>
<source>Extended Image Properties</source>
<translation>Extended Image Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<location filename="../../../scribus/actionmanager.cpp" line="1430"/>
<source>Show Control Characters</source>
<translation>Show Control Characters</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<location filename="../../../scribus/actionmanager.cpp" line="1448"/>
<source>&amp;Align and Distribute</source>
<translation>&amp;Align and Distribute</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<location filename="../../../scribus/actionmanager.cpp" line="1459"/>
<source>Edit Text...</source>
<translation>Edit Text...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<location filename="../../../scribus/actionmanager.cpp" line="1526"/>
<source>New Line</source>
<translation>New Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<location filename="../../../scribus/actionmanager.cpp" line="1527"/>
<source>Frame Break</source>
<translation>Frame Break</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<location filename="../../../scribus/actionmanager.cpp" line="1528"/>
<source>Column Break</source>
<translation>Column Break</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<location filename="../../../scribus/actionmanager.cpp" line="1522"/>
<source>Non Breaking Dash</source>
<translation>Non Breaking Dash</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<location filename="../../../scribus/actionmanager.cpp" line="1512"/>
<source>Toggle Guides</source>
<translation>Toggle Guides</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<location filename="../../../scribus/actionmanager.cpp" line="1443"/>
<source>&amp;Arrange Pages</source>
<translation>&amp;Arrange Pages</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<location filename="../../../scribus/actionmanager.cpp" line="1490"/>
<source>Dehyphenate Text</source>
<translation>Dehyphenate Text</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1396"/>
<location filename="../../../scribus/actionmanager.cpp" line="1409"/>
<source>Manage Page Properties...</source>
<translation>Manage Page Properties...</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation type="obsolete">Rulers relative to Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1276"/>
<location filename="../../../scribus/actionmanager.cpp" line="1288"/>
<source>Print Previe&amp;w</source>
<translation>Print Previe&amp;w</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1300"/>
<location filename="../../../scribus/actionmanager.cpp" line="1313"/>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScripts...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<location filename="../../../scribus/actionmanager.cpp" line="1407"/>
<source>Convert to Master Page...</source>
<translation>Convert to Master Page...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<location filename="../../../scribus/actionmanager.cpp" line="1494"/>
<source>&amp;Cascade</source>
<translation>&amp;Cascade</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<location filename="../../../scribus/actionmanager.cpp" line="1495"/>
<source>&amp;Tile</source>
<translation>&amp;Tile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">&amp;About Plug-ins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<location filename="../../../scribus/actionmanager.cpp" line="1370"/>
<source>More Info...</source>
<translation>More Info...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<location filename="../../../scribus/actionmanager.cpp" line="1360"/>
<source>&amp;Printing Enabled</source>
<translation>&amp;Printing Enabled</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<location filename="../../../scribus/actionmanager.cpp" line="1361"/>
<source>&amp;Flip Horizontally</source>
<translation>&amp;Flip Horizontally</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<location filename="../../../scribus/actionmanager.cpp" line="1362"/>
<source>&amp;Flip Vertically</source>
<translation>&amp;Flip Vertically</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<location filename="../../../scribus/actionmanager.cpp" line="1431"/>
<source>Show Rulers</source>
<translation>Show Rulers</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<location filename="../../../scribus/actionmanager.cpp" line="1440"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<location filename="../../../scribus/actionmanager.cpp" line="1534"/>
<source>Solidus</source>
<translation>Solidus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<location filename="../../../scribus/actionmanager.cpp" line="1536"/>
<source>Middle Dot</source>
<translation>Middle Dot</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1545"/>
<location filename="../../../scribus/actionmanager.cpp" line="1561"/>
<source>En Space</source>
<translation>En Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1546"/>
<location filename="../../../scribus/actionmanager.cpp" line="1562"/>
<source>Em Space</source>
<translation>Em Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1547"/>
<location filename="../../../scribus/actionmanager.cpp" line="1563"/>
<source>Thin Space</source>
<translation>Thin Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1548"/>
<location filename="../../../scribus/actionmanager.cpp" line="1564"/>
<source>Thick Space</source>
<translation>Thick Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1549"/>
<location filename="../../../scribus/actionmanager.cpp" line="1565"/>
<source>Mid Space</source>
<translation>Mid Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
<location filename="../../../scribus/actionmanager.cpp" line="1566"/>
<source>Hair Space</source>
<translation>Hair Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1562"/>
<location filename="../../../scribus/actionmanager.cpp" line="1578"/>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1563"/>
<location filename="../../../scribus/actionmanager.cpp" line="1579"/>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1564"/>
<location filename="../../../scribus/actionmanager.cpp" line="1580"/>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1565"/>
<location filename="../../../scribus/actionmanager.cpp" line="1581"/>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1566"/>
<location filename="../../../scribus/actionmanager.cpp" line="1582"/>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1567"/>
<location filename="../../../scribus/actionmanager.cpp" line="1583"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1568"/>
<location filename="../../../scribus/actionmanager.cpp" line="1584"/>
<source>st</source>
<translation>st</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<location filename="../../../scribus/actionmanager.cpp" line="1311"/>
<source>S&amp;tyles...</source>
<translation>S&amp;tyles...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<location filename="../../../scribus/actionmanager.cpp" line="1346"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<location filename="../../../scribus/actionmanager.cpp" line="1390"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>&amp;Outlines</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<location filename="../../../scribus/actionmanager.cpp" line="1299"/>
<source>Paste (&amp;Absolute)</source>
<translation>Paste (&amp;Absolute)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<location filename="../../../scribus/actionmanager.cpp" line="1300"/>
<source>C&amp;lear</source>
<translation>C&amp;lear</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<location filename="../../../scribus/actionmanager.cpp" line="1475"/>
<source>Insert PDF Push Button</source>
<translation>Insert PDF Push Button</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<location filename="../../../scribus/actionmanager.cpp" line="1476"/>
<source>Insert PDF Text Field</source>
<translation>Insert PDF Text Field</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<location filename="../../../scribus/actionmanager.cpp" line="1477"/>
<source>Insert PDF Check Box</source>
<translation>Insert PDF Check Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1465"/>
<location filename="../../../scribus/actionmanager.cpp" line="1478"/>
<source>Insert PDF Combo Box</source>
<translation>Insert PDF Combo Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<location filename="../../../scribus/actionmanager.cpp" line="1479"/>
<source>Insert PDF List Box</source>
<translation>Insert PDF List Box</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<location filename="../../../scribus/actionmanager.cpp" line="1480"/>
<source>Insert Text Annotation</source>
<translation>Insert Text Annotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<location filename="../../../scribus/actionmanager.cpp" line="1481"/>
<source>Insert Link Annotation</source>
<translation>Insert Link Annotation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<location filename="../../../scribus/actionmanager.cpp" line="1282"/>
<source>Save as &amp;EPS...</source>
<translation>Save as &amp;EPS...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<location filename="../../../scribus/actionmanager.cpp" line="1427"/>
<source>Show Text Frame Columns</source>
<translation>Show Text Frame Columns</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<location filename="../../../scribus/actionmanager.cpp" line="1395"/>
<source>&amp;Frame...</source>
<translation>&amp;Frame...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<location filename="../../../scribus/actionmanager.cpp" line="1419"/>
<source>Preview Mode</source>
<translation>Preview Mode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<location filename="../../../scribus/actionmanager.cpp" line="1423"/>
<source>Show Layer Indicators</source>
<translation>Show Layer Indicators</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<location filename="../../../scribus/actionmanager.cpp" line="1309"/>
<source>Patterns...</source>
<translation>Patterns...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<location filename="../../../scribus/actionmanager.cpp" line="1368"/>
<source>Send to Patterns</source>
<translation>Send to Patterns</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<location filename="../../../scribus/actionmanager.cpp" line="1398"/>
<source>Sticky Tools</source>
<translation>Sticky Tools</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<location filename="../../../scribus/actionmanager.cpp" line="1412"/>
<source>&amp;Fit to Height</source>
<translation>&amp;Fit to Height</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<location filename="../../../scribus/actionmanager.cpp" line="1413"/>
<source>Fit to Width</source>
<translation>Fit to Width</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1408"/>
<location filename="../../../scribus/actionmanager.cpp" line="1421"/>
<source>Show Bleeds</source>
<translation>Show Bleeds</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<location filename="../../../scribus/actionmanager.cpp" line="1483"/>
<source>Insert 3D Annotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1529"/>
<source>&amp;Zero Width Space</source>
<translation>&amp;Zero Width Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<location filename="../../../scribus/actionmanager.cpp" line="1530"/>
<source>Zero Width NB Space</source>
<translation>Zero Width NB Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
<location filename="../../../scribus/actionmanager.cpp" line="1542"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>Apostrophe</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1527"/>
<location filename="../../../scribus/actionmanager.cpp" line="1543"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>Straight Double</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1528"/>
<location filename="../../../scribus/actionmanager.cpp" line="1544"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>Single Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1529"/>
<location filename="../../../scribus/actionmanager.cpp" line="1545"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>Single Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1530"/>
<location filename="../../../scribus/actionmanager.cpp" line="1546"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>Double Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1531"/>
<location filename="../../../scribus/actionmanager.cpp" line="1547"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>Double Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1532"/>
<location filename="../../../scribus/actionmanager.cpp" line="1548"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>Single Reversed</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1533"/>
<location filename="../../../scribus/actionmanager.cpp" line="1549"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>Double Reversed</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1534"/>
<location filename="../../../scribus/actionmanager.cpp" line="1550"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>Single Left Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1535"/>
<location filename="../../../scribus/actionmanager.cpp" line="1551"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>Single Right Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1536"/>
<location filename="../../../scribus/actionmanager.cpp" line="1552"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>Double Left Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1537"/>
<location filename="../../../scribus/actionmanager.cpp" line="1553"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>Double Right Guillemet</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1538"/>
<location filename="../../../scribus/actionmanager.cpp" line="1554"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>Low Single Comma</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1539"/>
<location filename="../../../scribus/actionmanager.cpp" line="1555"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>Low Double Comma</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1540"/>
<location filename="../../../scribus/actionmanager.cpp" line="1556"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>CJK Single Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1541"/>
<location filename="../../../scribus/actionmanager.cpp" line="1557"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>CJK Single Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1542"/>
<location filename="../../../scribus/actionmanager.cpp" line="1558"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>CJK Double Left</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1543"/>
<location filename="../../../scribus/actionmanager.cpp" line="1559"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>CJK Double Right</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<location filename="../../../scribus/actionmanager.cpp" line="1418"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1278"/>
<source>Edit Latex Source...</source>
<translation type="obsolete">Edit Latex Source...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<location filename="../../../scribus/actionmanager.cpp" line="1465"/>
<source>Insert &amp;Text Frame</source>
<translation>Insert &amp;Text Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1453"/>
<location filename="../../../scribus/actionmanager.cpp" line="1466"/>
<source>Insert &amp;Image Frame</source>
<translation>Insert &amp;Image Frame</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1434"/>
<source>Insert &amp;Latex Frame</source>
<translation type="obsolete">Insert &amp;Latex Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1455"/>
<location filename="../../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert T&amp;able</source>
<translation>Insert T&amp;able</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<location filename="../../../scribus/actionmanager.cpp" line="1469"/>
<source>Insert &amp;Shape</source>
<translation>Insert &amp;Shape</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<location filename="../../../scribus/actionmanager.cpp" line="1470"/>
<source>Insert &amp;Polygon</source>
<translation>Insert &amp;Polygon</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1458"/>
<location filename="../../../scribus/actionmanager.cpp" line="1471"/>
<source>Insert &amp;Line</source>
<translation>Insert &amp;Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1459"/>
<location filename="../../../scribus/actionmanager.cpp" line="1472"/>
<source>Insert &amp;Bezier Curve</source>
<translation>Insert &amp;Bezier Curve</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1460"/>
<location filename="../../../scribus/actionmanager.cpp" line="1473"/>
<source>Insert &amp;Freehand Line</source>
<translation>Insert &amp;Freehand Line</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
<location filename="../../../scribus/actionmanager.cpp" line="1504"/>
<source>Scribus Homepage</source>
<translation>Scribus Homepage</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1489"/>
<location filename="../../../scribus/actionmanager.cpp" line="1505"/>
<source>Scribus Online Documentation</source>
<translation>Scribus Online Documentation</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<location filename="../../../scribus/actionmanager.cpp" line="1506"/>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<location filename="../../../scribus/actionmanager.cpp" line="1507"/>
<source>Getting Started with Scribus</source>
<translation>Getting Started with Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
<location filename="../../../scribus/actionmanager.cpp" line="1435"/>
<source>Show Context Menu</source>
<translation>Show Context Menu</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1472"/>
<location filename="../../../scribus/actionmanager.cpp" line="1488"/>
<source>&amp;Manage Images</source>
<translation>&amp;Manage Images</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1483"/>
<location filename="../../../scribus/actionmanager.cpp" line="1499"/>
<source>&amp;About Plugins</source>
<translation>&amp;About Plugins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<location filename="../../../scribus/actionmanager.cpp" line="1513"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Insert Unicode Character Begin Sequence</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
<location filename="../../../scribus/actionmanager.cpp" line="1279"/>
<source>Get Vector File...</source>
<translation>Get Vector File...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1290"/>
<location filename="../../../scribus/actionmanager.cpp" line="1302"/>
<source>Advanced Select All...</source>
<translation>Advanced Select All...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<location filename="../../../scribus/actionmanager.cpp" line="1306"/>
<source>Edit Source...</source>
<translation>Edit Source...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1296"/>
<location filename="../../../scribus/actionmanager.cpp" line="1308"/>
<source>Replace Colors...</source>
<translation>Replace Colours...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<location filename="../../../scribus/actionmanager.cpp" line="1432"/>
<source>Rulers Relative to Page</source>
<translation>Rulers Relative to Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
<location filename="../../../scribus/actionmanager.cpp" line="1467"/>
<source>Insert &amp;Render Frame</source>
<translation>Insert &amp;Render Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1492"/>
<location filename="../../../scribus/actionmanager.cpp" line="1508"/>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<location filename="../../../scribus/actionmanager.cpp" line="1525"/>
<source>Number of Pages</source>
<translation>Number of Pages</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<location filename="../../../scribus/actionmanager.cpp" line="1374"/>
<source>Adjust Image to Frame</source>
<translation>Adjust Image to Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>Move/Resize value indicator</source>
<translation type="obsolete">Move/Resize value indicator</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<location filename="../../../scribus/actionmanager.cpp" line="1706"/>
<source>File</source>
<translation>File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<location filename="../../../scribus/actionmanager.cpp" line="1706"/>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<location filename="../../../scribus/actionmanager.cpp" line="1708"/>
<source>Edit</source>
<translation>Edit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<location filename="../../../scribus/actionmanager.cpp" line="1708"/>
<source>&amp;Edit</source>
<translation>&amp;Edit</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<location filename="../../../scribus/actionmanager.cpp" line="1710"/>
<source>Style</source>
<translation>Style</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<location filename="../../../scribus/actionmanager.cpp" line="1710"/>
<source>&amp;Style</source>
<translation>&amp;Style</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<location filename="../../../scribus/actionmanager.cpp" line="1712"/>
<source>Item</source>
<translation>Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<location filename="../../../scribus/actionmanager.cpp" line="1712"/>
<source>&amp;Item</source>
<translation>&amp;Item</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<location filename="../../../scribus/actionmanager.cpp" line="1714"/>
<source>Insert</source>
<translation>Insert</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<location filename="../../../scribus/actionmanager.cpp" line="1714"/>
<source>I&amp;nsert</source>
<translation>I&amp;nsert</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<location filename="../../../scribus/actionmanager.cpp" line="1716"/>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<location filename="../../../scribus/actionmanager.cpp" line="1716"/>
<source>&amp;Page</source>
<translation>&amp;Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<location filename="../../../scribus/actionmanager.cpp" line="1718"/>
<source>View</source>
<translation>View</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<location filename="../../../scribus/actionmanager.cpp" line="1718"/>
<source>&amp;View</source>
<translation>&amp;View</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<location filename="../../../scribus/actionmanager.cpp" line="1720"/>
<source>Extras</source>
<translation>Extras</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<location filename="../../../scribus/actionmanager.cpp" line="1720"/>
<source>E&amp;xtras</source>
<translation>E&amp;xtras</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<location filename="../../../scribus/actionmanager.cpp" line="1722"/>
<source>Windows</source>
<translation>Windows</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<location filename="../../../scribus/actionmanager.cpp" line="1722"/>
<source>&amp;Windows</source>
<translation>&amp;Windows</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<location filename="../../../scribus/actionmanager.cpp" line="1724"/>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<location filename="../../../scribus/actionmanager.cpp" line="1724"/>
<source>&amp;Help</source>
<translation>&amp;Help</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1876"/>
<location filename="../../../scribus/actionmanager.cpp" line="1892"/>
<source>Plugin Menu Items</source>
<translation>Plugin Menu Items</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1878"/>
<location filename="../../../scribus/actionmanager.cpp" line="1894"/>
<source>Others</source>
<translation>Others</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1880"/>
<location filename="../../../scribus/actionmanager.cpp" line="1896"/>
<source>Unicode Characters</source>
<translation>Unicode Characters</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<location filename="../../../scribus/actionmanager.cpp" line="1502"/>
<source>Move/Resize Value Indicator</source>
<translation>Move/Resize Value Indicator</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<location filename="../../../scribus/actionmanager.cpp" line="1269"/>
<source>New &amp;from Template...</source>
<translation>New &amp;from Template...</translation>
</message>
8421,7 → 8311,7
<context>
<name>AdjustCmsDialog</name>
<message>
<location filename="../../scribus/adjustcmsdialog.cpp" line="16"/>
<location filename="../../../scribus/ui/adjustcmsdialog.cpp" line="16"/>
<source>CMS Settings</source>
<translation>CMS Settings</translation>
</message>
8429,245 → 8319,287
<context>
<name>AlignDistribute</name>
<message>
<location filename="../../scribus/aligndistribute.ui" line="35"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="36"/>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="79"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="65"/>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="92"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="78"/>
<source>&amp;Relative To:</source>
<translation>&amp;Relative To:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="431"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="137"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="144"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="151"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="158"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="165"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="172"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="179"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="186"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="193"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="200"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="273"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="280"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="287"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="294"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="301"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="311"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="318"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="328"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="335"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="345"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="352"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="359"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="369"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="376"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="383"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="390"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="521"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="528"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="270"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="244"/>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="490"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="437"/>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="500"/>
<source>Swap</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="90"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="90"/>
<source>Align and Distribute</source>
<translation>Align and Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="93"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="93"/>
<source>&amp;Relative to:</source>
<translation>&amp;Relative to:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="96"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="96"/>
<source>First Selected</source>
<translation>First Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="97"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="97"/>
<source>Last Selected</source>
<translation>Last Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="98"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="98"/>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="99"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="99"/>
<source>Margins</source>
<translation>Margins</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="101"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="101"/>
<source>Selection</source>
<translation>Selection</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="111"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="111"/>
<source>Align bottoms</source>
<translation>Align bottoms</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="113"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="113"/>
<source>Align right sides</source>
<translation>Align right sides</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="117"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="117"/>
<source>Center on vertical axis</source>
<translation>Centre on vertical axis</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="119"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="119"/>
<source>Align left sides</source>
<translation>Align left sides</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="121"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="121"/>
<source>Center on horizontal axis</source>
<translation>Centre on horizontal axis</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="125"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="125"/>
<source>Align tops</source>
<translation>Align tops</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="145"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="145"/>
<source>Distribute left sides equidistantly</source>
<translation>Distribute left sides equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="137"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="137"/>
<source>Distribute bottoms equidistantly</source>
<translation>Distribute bottoms equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="139"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="139"/>
<source>Distribute centers equidistantly horizontally</source>
<translation>Distribute centres equidistantly horizontally</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="147"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="147"/>
<source>Distribute centers equidistantly vertically</source>
<translation>Distribute centres equidistantly vertically</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="149"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="149"/>
<source>Distribute tops equidistantly</source>
<translation>Distribute tops equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="135"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="135"/>
<source>Distribute right sides equidistantly</source>
<translation>Distribute right sides equidistantly</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="100"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="100"/>
<source>Guide</source>
<translation>Guide</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="127"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="127"/>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="159"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="159"/>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="160"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="160"/>
<source>Distribute the items with the distance specified</source>
<translation>Distribute the items with the distance specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="162"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="162"/>
<source>None Selected</source>
<translation>None Selected</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="440"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="164"/>
<source>Swap items to the left</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="165"/>
<source>Swap items to the right</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="459"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="448"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="467"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="107"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="107"/>
<source>Align right sides of items to left side of anchor</source>
<translation>Align right sides of items to left side of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="109"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="109"/>
<source>Align left sides of items to right side of anchor</source>
<translation>Align left sides of items to right side of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="115"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="115"/>
<source>Align tops of items to bottom of anchor</source>
<translation>Align tops of items to bottom of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="123"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="123"/>
<source>Align bottoms of items to top of anchor</source>
<translation>Align bottoms of items to top of anchor</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="130"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="130"/>
<source>Make horizontal gaps between items equal</source>
<translation>Make horizontal gaps between items equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="132"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="132"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>Make horizontal gaps between items equal to the value specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="141"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="141"/>
<source>Make vertical gaps between items equal</source>
<translation>Make vertical gaps between items equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="143"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="143"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>Make vertical gaps between items equal to the value specified</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="151"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="151"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>Make horizontal gaps between items and sides of page equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="157"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="157"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>Make vertical gaps between items and the top and bottom of page margins equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="155"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="155"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>Make horizontal gaps between items and sides of page margins equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="153"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>Make vertical gaps between items and the top and bottom of page equal</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="103"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="103"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="105"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="105"/>
<source>The location of the selected guide to align to</source>
<translation>The location of the selected guide to align to</translation>
</message>
8675,27 → 8607,27
<context>
<name>AlignSelect</name>
<message>
<location filename="../../scribus/alignselect.cpp" line="110"/>
<location filename="../../../scribus/ui/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>Align Text Left</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="111"/>
<location filename="../../../scribus/ui/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>Align Text Right</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="112"/>
<location filename="../../../scribus/ui/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>Align Text Centre</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="113"/>
<location filename="../../../scribus/ui/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>Align Text Justified</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="114"/>
<location filename="../../../scribus/ui/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>Align Text Forced Justified</translation>
</message>
8703,714 → 8635,743
<context>
<name>Annot</name>
<message>
<location filename="../../scribus/annot.cpp" line="61"/>
<location filename="../../../scribus/ui/annot.cpp" line="61"/>
<source>Field Properties</source>
<translation>Field Properties</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="533"/>
<location filename="../../../scribus/ui/annot.cpp" line="92"/>
<location filename="../../../scribus/ui/annot.cpp" line="534"/>
<source>Type:</source>
<translation>Type:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<location filename="../../../scribus/ui/annot.cpp" line="96"/>
<source>Button</source>
<translation>Button</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<location filename="../../../scribus/ui/annot.cpp" line="96"/>
<source>Text Field</source>
<translation>Text Field</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<location filename="../../../scribus/ui/annot.cpp" line="96"/>
<source>Check Box</source>
<translation>Check Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<location filename="../../../scribus/ui/annot.cpp" line="96"/>
<source>Combo Box</source>
<translation>Combo Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<location filename="../../../scribus/ui/annot.cpp" line="96"/>
<source>List Box</source>
<translation>List Box</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="111"/>
<location filename="../../../scribus/ui/annot.cpp" line="111"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="121"/>
<location filename="../../../scribus/ui/annot.cpp" line="121"/>
<source>Name:</source>
<translation>Name:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="274"/>
<location filename="../../../scribus/ui/annot.cpp" line="146"/>
<location filename="../../../scribus/ui/annot.cpp" line="274"/>
<source>Text</source>
<translation>Text</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="176"/>
<location filename="../../../scribus/ui/annot.cpp" line="176"/>
<source>Border</source>
<translation>Border</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="182"/>
<location filename="../../../scribus/ui/annot.cpp" line="182"/>
<source>Color:</source>
<translation>Colour:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2104"/>
<location filename="../../../scribus/ui/annot.cpp" line="2110"/>
<source>None</source>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="197"/>
<location filename="../../../scribus/ui/annot.cpp" line="197"/>
<source>Width:</source>
<translation>Width:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<location filename="../../../scribus/ui/annot.cpp" line="201"/>
<source>Thin</source>
<translation>Thin</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="311"/>
<location filename="../../../scribus/ui/annot.cpp" line="201"/>
<location filename="../../../scribus/ui/annot.cpp" line="311"/>
<source>Normal</source>
<translation>Normal</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<location filename="../../../scribus/ui/annot.cpp" line="201"/>
<source>Wide</source>
<translation>Wide</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="209"/>
<location filename="../../../scribus/ui/annot.cpp" line="209"/>
<source>Style:</source>
<translation>Style:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<location filename="../../../scribus/ui/annot.cpp" line="213"/>
<source>Solid</source>
<translation>Solid</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<location filename="../../../scribus/ui/annot.cpp" line="213"/>
<source>Dashed</source>
<translation>Dashed</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<location filename="../../../scribus/ui/annot.cpp" line="213"/>
<source>Underline</source>
<translation>Underline</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<location filename="../../../scribus/ui/annot.cpp" line="214"/>
<source>Beveled</source>
<translation>Beveled</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<location filename="../../../scribus/ui/annot.cpp" line="214"/>
<source>Inset</source>
<translation>Inset</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="224"/>
<location filename="../../../scribus/ui/annot.cpp" line="224"/>
<source>Other</source>
<translation>Other</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="230"/>
<location filename="../../../scribus/ui/annot.cpp" line="230"/>
<source>Read Only</source>
<translation>Read Only</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="236"/>
<location filename="../../../scribus/ui/annot.cpp" line="236"/>
<source>Required</source>
<translation>Required</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="248"/>
<location filename="../../../scribus/ui/annot.cpp" line="248"/>
<source>Visibility:</source>
<translation>Visibility:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<location filename="../../../scribus/ui/annot.cpp" line="252"/>
<source>Visible</source>
<translation>Visible</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<location filename="../../../scribus/ui/annot.cpp" line="252"/>
<source>Hidden</source>
<translation>Hidden</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<location filename="../../../scribus/ui/annot.cpp" line="252"/>
<source>No Print</source>
<translation>No Print</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="253"/>
<location filename="../../../scribus/ui/annot.cpp" line="253"/>
<source>No View</source>
<translation>No View</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="262"/>
<location filename="../../../scribus/ui/annot.cpp" line="262"/>
<source>Appearance</source>
<translation>Appearance</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="280"/>
<location filename="../../../scribus/ui/annot.cpp" line="280"/>
<source>Text for Button Down</source>
<translation>Text for Button Down</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="283"/>
<location filename="../../../scribus/ui/annot.cpp" line="283"/>
<source>Text for Roll Over</source>
<translation>Text for Roll Over</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="294"/>
<location filename="../../../scribus/ui/annot.cpp" line="294"/>
<source>Icons</source>
<translation>Icons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="300"/>
<location filename="../../../scribus/ui/annot.cpp" line="300"/>
<source>Use Icons</source>
<translation>Use Icons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="357"/>
<location filename="../../../scribus/ui/annot.cpp" line="321"/>
<location filename="../../../scribus/ui/annot.cpp" line="339"/>
<location filename="../../../scribus/ui/annot.cpp" line="357"/>
<source>Remove</source>
<translation>Remove</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="329"/>
<location filename="../../../scribus/ui/annot.cpp" line="329"/>
<source>Pressed</source>
<translation>Pressed</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="347"/>
<location filename="../../../scribus/ui/annot.cpp" line="347"/>
<source>Roll Over</source>
<translation>Roll Over</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="366"/>
<location filename="../../../scribus/ui/annot.cpp" line="366"/>
<source>Icon Placement...</source>
<translation>Icon Placement...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="414"/>
<location filename="../../../scribus/ui/annot.cpp" line="415"/>
<source>Highlight</source>
<translation>Highlight</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<location filename="../../../scribus/ui/annot.cpp" line="422"/>
<source>Invert</source>
<translation>Invert</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<location filename="../../../scribus/ui/annot.cpp" line="422"/>
<source>Outlined</source>
<translation>Outlined</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<location filename="../../../scribus/ui/annot.cpp" line="422"/>
<source>Push</source>
<translation>Push</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="438"/>
<location filename="../../../scribus/ui/annot.cpp" line="439"/>
<source>Multi-Line</source>
<translation>Multi-Line</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="442"/>
<location filename="../../../scribus/ui/annot.cpp" line="443"/>
<source>Password</source>
<translation>Password</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<location filename="../../../scribus/ui/annot.cpp" line="450"/>
<source>Limit of</source>
<translation>Limit of</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="460"/>
<location filename="../../../scribus/ui/annot.cpp" line="461"/>
<source>Characters</source>
<translation>Characters</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="466"/>
<location filename="../../../scribus/ui/annot.cpp" line="467"/>
<source>Do Not Scroll</source>
<translation>Do Not Scroll</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="470"/>
<location filename="../../../scribus/ui/annot.cpp" line="471"/>
<source>Do Not Spell Check</source>
<translation>Do Not Spell Check</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="485"/>
<location filename="../../../scribus/ui/annot.cpp" line="486"/>
<source>Check Style:</source>
<translation>Check Style:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Check</source>
<translation>Check</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Cross</source>
<translation>Cross</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Diamond</source>
<translation>Diamond</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Circle</source>
<translation>Circle</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Star</source>
<translation>Star</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<location filename="../../../scribus/ui/annot.cpp" line="489"/>
<source>Square</source>
<translation>Square</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<location filename="../../../scribus/ui/annot.cpp" line="503"/>
<source>Default is Checked</source>
<translation>Default is Checked</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="514"/>
<location filename="../../../scribus/ui/annot.cpp" line="515"/>
<source>Editable</source>
<translation>Editable</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="521"/>
<location filename="../../../scribus/ui/annot.cpp" line="522"/>
<source>Options</source>
<translation>Options</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<location filename="../../../scribus/ui/annot.cpp" line="538"/>
<location filename="../../../scribus/ui/annot.cpp" line="2073"/>
<source>Go To</source>
<translation>Go To</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<location filename="../../../scribus/ui/annot.cpp" line="539"/>
<location filename="../../../scribus/ui/annot.cpp" line="2074"/>
<source>Submit Form</source>
<translation>Submit Form</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<location filename="../../../scribus/ui/annot.cpp" line="539"/>
<location filename="../../../scribus/ui/annot.cpp" line="2074"/>
<source>Reset Form</source>
<translation>Reset Form</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<location filename="../../../scribus/ui/annot.cpp" line="539"/>
<location filename="../../../scribus/ui/annot.cpp" line="2074"/>
<source>Import Data</source>
<translation>Import Data</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="570"/>
<location filename="../../../scribus/ui/annot.cpp" line="571"/>
<source>Event:</source>
<translation>Event:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<location filename="../../../scribus/ui/annot.cpp" line="574"/>
<location filename="../../../scribus/ui/annot.cpp" line="2053"/>
<source>Mouse Up</source>
<translation>Mouse Up</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<location filename="../../../scribus/ui/annot.cpp" line="574"/>
<location filename="../../../scribus/ui/annot.cpp" line="2053"/>
<source>Mouse Down</source>
<translation>Mouse Down</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<location filename="../../../scribus/ui/annot.cpp" line="574"/>
<location filename="../../../scribus/ui/annot.cpp" line="2053"/>
<source>Mouse Enter</source>
<translation>Mouse Enter</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<location filename="../../../scribus/ui/annot.cpp" line="575"/>
<location filename="../../../scribus/ui/annot.cpp" line="2054"/>
<source>Mouse Exit</source>
<translation>Mouse Exit</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<location filename="../../../scribus/ui/annot.cpp" line="575"/>
<location filename="../../../scribus/ui/annot.cpp" line="2054"/>
<source>On Focus</source>
<translation>On Focus</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<location filename="../../../scribus/ui/annot.cpp" line="575"/>
<location filename="../../../scribus/ui/annot.cpp" line="2054"/>
<source>On Blur</source>
<translation>On Blur</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="585"/>
<location filename="../../../scribus/ui/annot.cpp" line="586"/>
<source>Script:</source>
<translation>Script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1111"/>
<location filename="../../../scribus/ui/annot.cpp" line="605"/>
<location filename="../../../scribus/ui/annot.cpp" line="934"/>
<location filename="../../../scribus/ui/annot.cpp" line="960"/>
<location filename="../../../scribus/ui/annot.cpp" line="1037"/>
<location filename="../../../scribus/ui/annot.cpp" line="1112"/>
<source>Edit...</source>
<translation>Edit...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="670"/>
<location filename="../../../scribus/ui/annot.cpp" line="671"/>
<source>Submit to URL:</source>
<translation>Submit to URL:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="678"/>
<source>Submit Data as HTML</source>
<translation type="obsolete">Submit Data as HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="707"/>
<location filename="../../../scribus/ui/annot.cpp" line="708"/>
<source>Import Data from:</source>
<translation>Import Data from:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="610"/>
<location filename="../../../scribus/ui/annot.cpp" line="611"/>
<source>Destination</source>
<translation>Destination</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="616"/>
<location filename="../../../scribus/ui/annot.cpp" line="617"/>
<source>To File:</source>
<translation>To File:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="623"/>
<location filename="../../../scribus/ui/annot.cpp" line="624"/>
<source>Change...</source>
<translation>Change...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="632"/>
<location filename="../../../scribus/ui/annot.cpp" line="633"/>
<source>Page:</source>
<translation>Page:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="646"/>
<location filename="../../../scribus/ui/annot.cpp" line="647"/>
<source>X-Pos:</source>
<translation>X-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="658"/>
<location filename="../../../scribus/ui/annot.cpp" line="650"/>
<location filename="../../../scribus/ui/annot.cpp" line="659"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="654"/>
<location filename="../../../scribus/ui/annot.cpp" line="655"/>
<source>Y-Pos:</source>
<translation>Y-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="716"/>
<location filename="../../../scribus/ui/annot.cpp" line="717"/>
<source>Action</source>
<translation>Action</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="747"/>
<location filename="../../../scribus/ui/annot.cpp" line="748"/>
<source>Field is formatted as:</source>
<translation>Field is formatted as:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Plain</source>
<translation>Plain</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Number</source>
<translation>Number</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Percentage</source>
<translation>Percentage</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Date</source>
<translation>Date</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Time</source>
<translation>Time</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<location filename="../../../scribus/ui/annot.cpp" line="751"/>
<source>Custom</source>
<translation>Custom</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="768"/>
<location filename="../../../scribus/ui/annot.cpp" line="769"/>
<source>Number Format</source>
<translation>Number Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="836"/>
<location filename="../../../scribus/ui/annot.cpp" line="778"/>
<location filename="../../../scribus/ui/annot.cpp" line="837"/>
<source>Decimals:</source>
<translation>Decimals:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="791"/>
<location filename="../../../scribus/ui/annot.cpp" line="792"/>
<source>Use Currency Symbol</source>
<translation>Use Currency Symbol</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="800"/>
<location filename="../../../scribus/ui/annot.cpp" line="801"/>
<source>Prepend Currency Symbol</source>
<translation>Prepend Currency Symbol</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="847"/>
<location filename="../../../scribus/ui/annot.cpp" line="805"/>
<location filename="../../../scribus/ui/annot.cpp" line="848"/>
<source>Formatting</source>
<translation>Formatting</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="827"/>
<location filename="../../../scribus/ui/annot.cpp" line="828"/>
<source>Percent Format</source>
<translation>Percent Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="870"/>
<location filename="../../../scribus/ui/annot.cpp" line="871"/>
<source>Date Format</source>
<translation>Date Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="896"/>
<location filename="../../../scribus/ui/annot.cpp" line="897"/>
<source>Time Format</source>
<translation>Time Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="918"/>
<location filename="../../../scribus/ui/annot.cpp" line="919"/>
<source>Custom Scripts</source>
<translation>Custom Scripts</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="930"/>
<location filename="../../../scribus/ui/annot.cpp" line="931"/>
<source>Format:</source>
<translation>Format:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="956"/>
<location filename="../../../scribus/ui/annot.cpp" line="957"/>
<source>Keystroke:</source>
<translation>Keystroke:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="980"/>
<location filename="../../../scribus/ui/annot.cpp" line="981"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="996"/>
<location filename="../../../scribus/ui/annot.cpp" line="997"/>
<source>Value is not validated</source>
<translation>Value is not validated</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1005"/>
<location filename="../../../scribus/ui/annot.cpp" line="1006"/>
<source>Value must be greater than or equal to:</source>
<translation>Value must be greater than or equal to:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1009"/>
<location filename="../../../scribus/ui/annot.cpp" line="1010"/>
<source>and less or equal to:</source>
<translation>and less or equal to:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1020"/>
<location filename="../../../scribus/ui/annot.cpp" line="1021"/>
<source>Custom validate script:</source>
<translation>Custom validate script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1041"/>
<location filename="../../../scribus/ui/annot.cpp" line="1042"/>
<source>Validate</source>
<translation>Validate</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1058"/>
<location filename="../../../scribus/ui/annot.cpp" line="1059"/>
<source>Value is not calculated</source>
<translation>Value is not calculated</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1067"/>
<location filename="../../../scribus/ui/annot.cpp" line="1068"/>
<source>Value is the</source>
<translation>Value is the</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<location filename="../../../scribus/ui/annot.cpp" line="1073"/>
<source>sum</source>
<translation>sum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<location filename="../../../scribus/ui/annot.cpp" line="1073"/>
<source>product</source>
<translation>product</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<location filename="../../../scribus/ui/annot.cpp" line="1073"/>
<source>average</source>
<translation>average</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<location filename="../../../scribus/ui/annot.cpp" line="1073"/>
<source>minimum</source>
<translation>minimum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1073"/>
<location filename="../../../scribus/ui/annot.cpp" line="1074"/>
<source>maximum</source>
<translation>maximum</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1080"/>
<location filename="../../../scribus/ui/annot.cpp" line="1081"/>
<source>of the following fields:</source>
<translation>of the following fields:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1090"/>
<location filename="../../../scribus/ui/annot.cpp" line="1091"/>
<source>Pick...</source>
<translation>Pick...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1095"/>
<location filename="../../../scribus/ui/annot.cpp" line="1096"/>
<source>Custom calculation script:</source>
<translation>Custom calculation script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1115"/>
<location filename="../../../scribus/ui/annot.cpp" line="1116"/>
<source>Calculate</source>
<translation>Calculate</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1134"/>
<location filename="../../../scribus/ui/annot.cpp" line="1135"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1138"/>
<location filename="../../../scribus/ui/annot.cpp" line="1139"/>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1191"/>
<location filename="../../../scribus/ui/annot.cpp" line="1192"/>
<source>Enter a comma separated list of fields here</source>
<translation>Enter a comma separated list of fields here</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1192"/>
<location filename="../../../scribus/ui/annot.cpp" line="1193"/>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>You need at least the Icon for Normal to use Icons for Buttons</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<location filename="../../../scribus/ui/annot.cpp" line="1303"/>
<location filename="../../../scribus/ui/annot.cpp" line="1335"/>
<location filename="../../../scribus/ui/annot.cpp" line="1360"/>
<location filename="../../../scribus/ui/annot.cpp" line="2268"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1469"/>
<location filename="../../../scribus/ui/annot.cpp" line="1475"/>
<source>Example:</source>
<translation>Example:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2096"/>
<location filename="../../../scribus/ui/annot.cpp" line="2102"/>
<source>Selection Change</source>
<translation>Selection Change</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="152"/>
<location filename="../../../scribus/ui/annot.cpp" line="152"/>
<source>Font for use with PDF 1.3:</source>
<translation>Font for use with PDF 1.3:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1190"/>
<location filename="../../../scribus/ui/annot.cpp" line="1190"/>
<location filename="../../../scribus/ui/annot.cpp" line="1191"/>
<source>Flag is ignored for PDF 1.3</source>
<translation>Flag is ignored for PDF 1.3</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<location filename="../../../scribus/ui/annot.cpp" line="2268"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDF Files (*.pdf);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2105"/>
<location filename="../../../scribus/ui/annot.cpp" line="538"/>
<location filename="../../../scribus/ui/annot.cpp" line="2073"/>
<location filename="../../../scribus/ui/annot.cpp" line="2111"/>
<source>JavaScript</source>
<translation>JavaScript</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<location filename="../../../scribus/ui/annot.cpp" line="422"/>
<source>None</source>
<comment>highlight</comment>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<location filename="../../../scribus/ui/annot.cpp" line="538"/>
<location filename="../../../scribus/ui/annot.cpp" line="2073"/>
<source>None</source>
<comment>action</comment>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<location filename="../../../scribus/ui/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation>Tooltip:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<location filename="../../../scribus/ui/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation>Do Not Export Value</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1358"/>
<location filename="../../../scribus/ui/annot.cpp" line="1336"/>
<location filename="../../../scribus/ui/annot.cpp" line="1361"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1303"/>
<location filename="../../../scribus/ui/annot.cpp" line="1304"/>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="625"/>
<location filename="../../../scribus/ui/annot.cpp" line="626"/>
<source>Export absolute Filename</source>
<translation>Export absolute Filename</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="682"/>
<location filename="../../../scribus/ui/annot.cpp" line="683"/>
<source>Submit format:</source>
<translation>Submit format:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<location filename="../../../scribus/ui/annot.cpp" line="686"/>
<source>FDF</source>
<translation>FDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<location filename="../../../scribus/ui/annot.cpp" line="686"/>
<source>HTML</source>
<translation>HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<location filename="../../../scribus/ui/annot.cpp" line="686"/>
<source>XFDF</source>
<translation>XFDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<location filename="../../../scribus/ui/annot.cpp" line="686"/>
<source>PDF</source>
<translation>PDF</translation>
</message>
9418,77 → 9379,78
<context>
<name>Annota</name>
<message>
<location filename="../../scribus/annota.cpp" line="47"/>
<location filename="../../../scribus/ui/annota.cpp" line="47"/>
<source>Annotation Properties</source>
<translation>Annotation Properties</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="77"/>
<location filename="../../../scribus/ui/annota.cpp" line="77"/>
<source>Text</source>
<translation>Text</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="78"/>
<location filename="../../../scribus/ui/annota.cpp" line="78"/>
<source>Link</source>
<translation>Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="79"/>
<location filename="../../../scribus/ui/annota.cpp" line="79"/>
<source>External Link</source>
<translation>External Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="80"/>
<location filename="../../../scribus/ui/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>External Web-Link</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="118"/>
<location filename="../../../scribus/ui/annota.cpp" line="118"/>
<source>Destination</source>
<translation>Destination</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="177"/>
<location filename="../../../scribus/ui/annota.cpp" line="168"/>
<location filename="../../../scribus/ui/annota.cpp" line="177"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<location filename="../../../scribus/ui/annota.cpp" line="409"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="82"/>
<location filename="../../../scribus/ui/annota.cpp" line="82"/>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="129"/>
<location filename="../../../scribus/ui/annota.cpp" line="129"/>
<source>C&amp;hange...</source>
<translation>C&amp;hange...</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="147"/>
<location filename="../../../scribus/ui/annota.cpp" line="147"/>
<source>&amp;Page:</source>
<translation>&amp;Page:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="171"/>
<location filename="../../../scribus/ui/annota.cpp" line="171"/>
<source>&amp;X-Pos</source>
<translation>&amp;X-Pos</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="179"/>
<location filename="../../../scribus/ui/annota.cpp" line="179"/>
<source>&amp;Y-Pos:</source>
<translation>&amp;Y-Pos:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<location filename="../../../scribus/ui/annota.cpp" line="409"/>
<source>%1;;All Files (*)</source>
<translation>%1;;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="131"/>
<location filename="../../../scribus/ui/annota.cpp" line="131"/>
<source>Export absolute Filename</source>
<translation>Export absolute Filename</translation>
</message>
9496,122 → 9458,116
<context>
<name>ApplyMasterPageDialog</name>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="267"/>
<source>Apply Master Page</source>
<translation>Apply Master Page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="268"/>
<source>&amp;Master Page:</source>
<translation>&amp;Master Page:</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply To</source>
<translation type="obsolete">Apply To</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;page</source>
<translation type="obsolete">Current &amp;page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="271"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even pages</source>
<translation type="obsolete">&amp;Even pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="273"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd pages</source>
<translation type="obsolete">O&amp;dd pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="275"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All pages</source>
<translation type="obsolete">&amp;All pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="277"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within range</source>
<translation type="obsolete">&amp;Within range</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="279"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="281"/>
<source>to</source>
<translation>to</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="280"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>Apply the selected master page to even, odd or all pages within the following range</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation>Possible Hyphenation</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="269"/>
<source>Apply to</source>
<translation>Apply to</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;Page</source>
<translation>Current &amp;Page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even Pages</source>
<translation>&amp;Even Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd Pages</source>
<translation>O&amp;dd Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="276"/>
<source>&amp;All Pages</source>
<translation>&amp;All Pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within Range</source>
<translation>&amp;Within Range</translation>
</message>
9619,27 → 9575,27
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="68"/>
<source>Spell-checking support</source>
<translation>Spell-checking support</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="74"/>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="36"/>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="99"/>
<source>Aspell Plugin Error</source>
<translation>Aspell Plugin Error</translation>
</message>
9647,97 → 9603,96
<context>
<name>AspellPluginBase</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<source>Spell Check</source>
<translation>Spell Check</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
<source>Replacement:</source>
<translation>Replacement:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
<source>&amp;Add Word</source>
<translation>&amp;Add Word</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
<source>&amp;Change</source>
<translation>&amp;Change</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="351"/>
<source>&amp;Exit</source>
<translation type="obsolete">&amp;Exit</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
<source>Not in Dictionary:</source>
<translation>Not in Dictionary:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
<source>Word that was not found in the active dictionary</source>
<translation>Word that was not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation>Replacement text for the current word that was not found in the dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
<source>Active Dictionary: </source>
<translation>Active Dictionary: </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
<source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
<source>Ignore the current text not found in the active dictionary</source>
<translation>Ignore the current text not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
<source>&amp;Ignore</source>
<translation>&amp;Ignore</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation>Ignore all occurrences of the current text not found in the active dictionary</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
<source>I&amp;gnore All</source>
<translation>I&amp;gnore All</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation>Add the current word to the your personal spelling dictionary for future use</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation>Change the current word that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
<source>Change A&amp;ll</source>
<translation>Change A&amp;ll</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
<source>Close</source>
<translation>Close</translation>
</message>
9745,62 → 9700,63
<context>
<name>AspellPluginImpl</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
<source>Loaded </source>
<translation>Loaded </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
<source>default </source>
<translation>default </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
<source> aspell dictionary.</source>
<translation> aspell dictionary.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="84"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="89"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="91"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="96"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="359"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="365"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="367"/>
<source> by adding it to the session list.</source>
<translation> by adding it to the session list.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="382"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="388"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="235"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="242"/>
<source>Spelling check complete</source>
<translation>Spelling check complete</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="427"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="243"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="434"/>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="62"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="69"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation>No available Aspell dictionaries found. Install some, please.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="429"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="435"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation>Do you want start from the beginning of the selection with new language selected?</translation>
</message>
9808,27 → 9764,32
<context>
<name>AutoformButtonGroup</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="36"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1280"/>
<source>Arrows</source>
<translation>Arrows</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="44"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1281"/>
<source>Flow Chart</source>
<translation>Flow Chart</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="53"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1282"/>
<source>Jigsaw</source>
<translation>Jigsaw</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="66"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1283"/>
<source>Specials</source>
<translation>Specials</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="21"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1279"/>
<source>Default Shapes</source>
<translation>Default Shapes</translation>
</message>
9836,22 → 9797,20
<context>
<name>Barcode</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="0"/>
<source>&amp;Barcode Generator...</source>
<translation type="obsolete">&amp;Barcode Generator...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">Scribus frontend for Pure Postscript Barcode Writer</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<source>&amp;Barcode...</source>
<translation>&amp;Barcode...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation>Scribus frontend for Pure PostScript Barcode Writer</translation>
</message>
9859,92 → 9818,96
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="340"/>
<source>Error opening file: %1</source>
<translation>Error opening file: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation>12 or 13 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation>8 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation>11 or 12 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation>7 or 8 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation>5 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation>2 digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>Variable number of characters, digits and any of the symbols -. *$/+%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="63"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>Variable number of digits and any of the symbols -$:/.+ABCD.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="74"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="82"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="85"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation>Variable number of digits</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation>Variable number of digits and capital letters</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation>Variable number of hexadecimal characters</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="374"/>
<source>Barcode incomplete</source>
<translation>Barcode incomplete</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
<source>Select Type</source>
<translation>Select Type</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="163"/>
<source>Select Barcode Type</source>
<translation>Select Barcode Type</translation>
</message>
9952,187 → 9915,181
<context>
<name>BarcodeGeneratorBase</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode Creator</source>
<translation type="obsolete">Barcode Creator</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode</source>
<translation type="obsolete">Barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="140"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="140"/>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
<source>Select one of the available barcode type here</source>
<translation>Select one of the available barcode type here</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>The numeric representation of the code itself. See the help message below</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
<source>Reset the barcode samples</source>
<translation>Reset the barcode samples</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">&amp;Include text in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation>If checked, there will be numbers in the barcode too</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
<source>&amp;Guard whitespace</source>
<translation type="obsolete">&amp;Guard whitespace</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
<source>Draw arrows to be sure of space next the code</source>
<translation>Draw arrows to be sure of space next the code</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
<source>Colors</source>
<translation>Colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="184"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="184"/>
<source>&amp;Background</source>
<translation>&amp;Background</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
<source>Background color - under the code lines</source>
<translation>Background colour - under the code lines</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
<source>&amp;Lines</source>
<translation>&amp;Lines</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
<source>Color of the lines in barcode</source>
<translation>Colour of the lines in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
<source>&amp;Text</source>
<translation>&amp;Text</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
<source>Color of the text and numbers</source>
<translation>Colour of the text and numbers</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
<source>Hints and help is shown here</source>
<translation>Hints and help is shown here</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
<source>Preview of the result. 72dpi sample.</source>
<translation>Preview of the result. 72dpi sample.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="120"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="120"/>
<source>Co&amp;de:</source>
<translation>Co&amp;de:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">I&amp;nclude checksum</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
<source>Generate and include a checksum in barcode</source>
<translation>Generate and include a checksum in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">Incl&amp;ude checksum digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
<source>Include the checksum digit in the barcode text</source>
<translation>Include the checksum digit in the barcode text</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<source>Insert Barcode</source>
<translation>Insert Barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
<source>Incl&amp;ude Checksum Digit</source>
<translation>Incl&amp;ude Checksum Digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
<source>I&amp;nclude Checksum</source>
<translation>I&amp;nclude Checksum</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="65"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="65"/>
<source>&amp;Guard Whitespace</source>
<translation>&amp;Guard Whitespace</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
<source>&amp;Include Text in Barcode</source>
<translation>&amp;Include Text in Barcode</translation>
</message>
10140,134 → 10097,139
<context>
<name>Biblio</name>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1419"/>
<source>Scrapbook</source>
<translation>Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="839"/>
<source>Delete</source>
<translation>Delete</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1227"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1235"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1319"/>
<source>Object</source>
<translation>Object</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="914"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1240"/>
<source>New Entry</source>
<translation>New Entry</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="837"/>
<source>Rename</source>
<translation>Rename</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="914"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1105"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1240"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>Name &quot;%1&quot; is not unique.
<translation type="obsolete">Name &quot;%1&quot; is not unique.
Please choose another.</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="668"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation>Choose a Scrapbook Directory</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation>Choose a Directory</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation>Choose a scrapbook file to import</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1420"/>
<source>Create a new scrapbook page</source>
<translation>Create a new scrapbook page</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1421"/>
<source>Load an existing scrapbook</source>
<translation>Load an existing scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1422"/>
<source>Save the selected scrapbook</source>
<translation>Save the selected scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1423"/>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Import an scrapbook file from Scribus &lt;=1.3.2</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1424"/>
<source>Close the selected scrapbook</source>
<translation>Close the selected scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation>Copy To:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation>Move To:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation>Main</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation>Copied Items</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1105"/>
<source>New Name</source>
<translation>New Name</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="739"/>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>Scrapbook (*.scs *.SCS)</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="833"/>
<source>Paste to Page</source>
<translation>Paste to Page</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="889"/>
<source>Save as...</source>
<translation>Save as...</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="892"/>
<source>Close</source>
<translation>Close</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="895"/>
<source>Delete Contents</source>
<translation>Delete Contents</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1060"/>
<source>Do you really want to delete all entries?</source>
<translation>Do you really want to delete all entries?</translation>
</message>
10275,7 → 10237,7
<context>
<name>BookPalette</name>
<message>
<location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
<location filename="../../../scribus/ui/bookmarkpalette.cpp" line="51"/>
<source>Bookmarks</source>
<translation>Bookmarks</translation>
</message>
10283,107 → 10245,107
<context>
<name>ButtonIcon</name>
<message>
<location filename="../../scribus/buttonicon.cpp" line="29"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>Icon Placement</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="38"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>Layout:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>Caption only</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Icon only</source>
<translation>Icon only</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>Caption below Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>Caption above Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>Caption right to Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>Caption left to Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>Caption overlays Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="50"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>Scale:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
<source>Always</source>
<translation>Always</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
<source>When Icon is too big</source>
<translation>When Icon is too big</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>Never</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="63"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>Scale How:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="66"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="66"/>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="67"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="67"/>
<source>Non Proportional</source>
<translation>Non Proportional</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="90"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="90"/>
<source>Icon</source>
<translation>Icon</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="117"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="117"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="121"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="121"/>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="124"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="124"/>
<source>Reset</source>
<translation>Reset</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
<source>When Icon is too small</source>
<translation>When Icon is too small</translation>
</message>
10391,37 → 10353,39
<context>
<name>CMSPrefs</name>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="34"/>
<source>System Profiles</source>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="89"/>
<source>Rendering Intents</source>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="26"/>
<source>Monitor profile can only be changed when no document are currently opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
<source>Perceptual</source>
<translation>Perceptual</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
<source>Relative Colorimetric</source>
<translation>Relative Colourimetric</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
<source>Saturation</source>
<translation>Saturation</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
<source>Absolute Colorimetric</source>
<translation>Absolute Colourimetric</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="143"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile that you have generated or received from the manufacturer.
10428,7 → 10392,6
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="144"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile for your printer model from the manufacturer.
10435,7 → 10398,6
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="150"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="obsolete">Black Point Compensation is a method of improving contrast in photos.
10442,7 → 10404,6
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="147"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
10449,7 → 10410,6
based on the chosen printer profile.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="149"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="obsolete">Method of showing colours on the screen which may not print properly.
10456,92 → 10416,74
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="31"/>
<source>&amp;Activate Color Management</source>
<translation type="obsolete">&amp;Activate Colour Management</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="75"/>
<source>&amp;Monitor:</source>
<translation type="obsolete">&amp;Monitor:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="83"/>
<source>P&amp;rinter:</source>
<translation type="obsolete">P&amp;rinter:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="113"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="130"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="obsolete">Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="134"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="obsolete">Use &amp;Blackpoint Compensation</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">&amp;RGB Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">&amp;CMYK Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="139"/>
<source>Default color profile for imported CMYK images</source>
<translation type="obsolete">Default colour profile for imported CMYK images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="140"/>
<source>Default color profile for imported RGB images</source>
<translation type="obsolete">Default colour profile for imported RGB images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="59"/>
<source>&amp;RGB Solid Colors:</source>
<translation type="obsolete">&amp;RGB Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="67"/>
<source>&amp;CMYK Solid Colors:</source>
<translation type="obsolete">&amp;CMYK Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>Pictures:</source>
<translation type="obsolete">Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="106"/>
<source>Sol&amp;id Colors:</source>
<translation type="obsolete">Sol&amp;id Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="121"/>
<source>Convert all colors to printer space</source>
<translation type="obsolete">Convert all colours to printer space</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="141"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="obsolete">Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="142"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="obsolete">Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="145"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for solid colours. Unless you know why to change it,
10548,7 → 10490,6
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="146"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for images. Unless you know why to change it,
10555,7 → 10496,6
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="148"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="obsolete">Simulate a full colour managed environment :
10562,7 → 10502,6
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="98"/>
<source>Images:</source>
<translation type="obsolete">Images:</translation>
</message>
10570,67 → 10509,81
<context>
<name>CMSPrefsBase</name>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="19"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="20"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="40"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="32"/>
<source>&amp;Activate Color Management</source>
<translation>&amp;Activate Colour Management</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="50"/>
<source>System Profiles</source>
<translation>System Profiles</translation>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="74"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="54"/>
<source>&amp;RGB Images:</source>
<translation>&amp;RGB Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="90"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="70"/>
<source>Default color profile for imported RGB images</source>
<translation>Default colour profile for imported RGB images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="97"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="77"/>
<source>&amp;CMYK Images:</source>
<translation>&amp;CMYK Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="113"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="93"/>
<source>Default color profile for imported CMYK images</source>
<translation>Default colour profile for imported CMYK images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="120"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="100"/>
<source>&amp;RGB Solid Colors:</source>
<translation>&amp;RGB Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="136"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="116"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation>Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="143"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="123"/>
<source>&amp;CMYK Solid Colors:</source>
<translation>&amp;CMYK Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="159"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="139"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="166"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="245"/>
<source>Document Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="278"/>
<source>Simulate printer on Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="313"/>
<source>Monitor Profile</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="325"/>
<source>&amp;Monitor:</source>
<translation>&amp;Monitor:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="182"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="341"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile that you have generated or received from the manufacturer.
10637,12 → 10590,17
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="190"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="146"/>
<source>P&amp;rinter:</source>
<translation>P&amp;rinter:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="206"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="42"/>
<source>Document Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="162"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile for your printer model from the manufacturer.
10649,17 → 10607,16
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="220"/>
<source>Rendering Intents</source>
<translation>Rendering Intents</translation>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="244"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="188"/>
<source>Images:</source>
<translation>Images:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="260"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="204"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for images. Unless you know why to change it,
10666,12 → 10623,12
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="268"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="212"/>
<source>Sol&amp;id Colors:</source>
<translation>Sol&amp;id Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="284"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="228"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for solid colours. Unless you know why to change it,
10678,7 → 10635,7
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="298"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="274"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation>Enable &apos;soft proofing&apos; of how your document colours will print,
10685,12 → 10642,11
based on the chosen printer profile.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="302"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>Sim&amp;ulate Printer on the Screen</translation>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="329"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="285"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation>Simulate a full colour managed environment :
10697,12 → 10653,12
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="333"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="289"/>
<source>Convert all colors to printer space</source>
<translation>Convert all colours to printer space</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="340"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="296"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>Method of showing colours on the screen which may not print properly.
10709,12 → 10665,12
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="344"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="300"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="357"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="263"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>Black Point Compensation is a method of improving contrast in photos.
10721,7 → 10677,12
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="361"/>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="176"/>
<source>Document Rendering Intents</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="267"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation>Use &amp;Blackpoint Compensation</translation>
</message>
10729,112 → 10690,126
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../scribus/cmykfw.cpp" line="92"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="92"/>
<source>Edit Color</source>
<translation>Edit Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="906"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="116"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="661"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="680"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="899"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="906"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="911"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="117"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="414"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="911"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="764"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="118"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="764"/>
<source>Web Safe RGB</source>
<translation>Web Safe RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="141"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="141"/>
<source>New</source>
<translation>New</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="158"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="158"/>
<source>Old</source>
<translation>Old</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="705"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="266"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="705"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="706"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="293"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="706"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="707"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="320"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="707"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="347"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="347"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="444"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="444"/>
<source>Dynamic Color Bars</source>
<translation>Dynamic Colour Bars</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="442"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="442"/>
<source>Static Color Bars</source>
<translation>Static Colour Bars</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="749"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="749"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="750"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="750"/>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="751"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="751"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="704"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="288"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="315"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="342"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="369"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="702"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="703"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="704"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="195"/>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-Colourmap</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="101"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="101"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="111"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="111"/>
<source>Color &amp;Model</source>
<translation>Colour &amp;Model</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="125"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="125"/>
<source>Is Spot Color</source>
<translation>Is Spot Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Is Registration Color</source>
<translation type="obsolete">Is Registration Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1002"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="1002"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>You cannot create a colour named &quot;%1&quot;.
10841,12 → 10816,11
It is a reserved name for transparent colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
<translation type="obsolete">Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1011"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="1011"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation>The name of the colour already exists,
10853,23 → 10827,24
please choose another one.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation>Choosing this will make this colour a spot colour, thus creating another spot when creating plates or separations. This is used most often when a logo or other colour needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="785"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="784"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="785"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Colour Management.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="995"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="995"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>You cannot create a colour without a namePlease give it a name</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="196"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="196"/>
<source>HSV Color Map</source>
<translation>HSV Colour Map</translation>
</message>
10877,232 → 10852,241
<context>
<name>CWDialog</name>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation>Merging colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation>Error: </translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation>Colour %1 exists already!</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
<source>Color %1 appended.</source>
<translation>Colour %1 appended.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
<source>Now opening the color manager.</source>
<translation>Now opening the colour manager.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
<source>Color Merging</source>
<translation>Colour Merging</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="486"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>Unable to find the requested colour. You have probably selected black, grey or white. There is no way to process this colour.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<source>Color Wheel</source>
<translation>Colour Wheel</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>Click the wheel to get the base colour. Its colour model depends on the chosen tab.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
<source>Result Colors</source>
<translation>Result Colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="77"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="82"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="87"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
<source>Colors of your chosen color scheme.</source>
<translation>Colours of your chosen colour scheme.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
<source>Color Scheme Method</source>
<translation>Colour Scheme Method</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
<source>Angle:</source>
<translation>Angle:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
<source>Merge created colors into the document colors</source>
<translation>Merge created colours into the document colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
<source>&amp;Merge</source>
<translation>&amp;Merge</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
<source>Alt+M</source>
<translation>Alt+M</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
<source>Replace created colors in the document colors</source>
<translation>Replace created colours in the document colours</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
<source>&amp;Replace</source>
<translation>&amp;Replace</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
<source>Alt+R</source>
<translation>Alt+R</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
<source>Leave colors untouched</source>
<translation>Leave colours untouched</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
<source>&amp;Cancel</source>
<translation>&amp;Cancel</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
<source>Preview:</source>
<translation>Preview:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
<source>Sample color scheme.</source>
<translation>Sample colour scheme.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>Simulate common vision defects here. Select type of the defect.</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
<source>Vision Defect Type:</source>
<translation>Vision Defect Type:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="342"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="342"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="352"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="382"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="412"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="402"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="402"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="432"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="432"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="462"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="498"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
<source>HSV:</source>
<translation>HSV:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="598"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="598"/>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="625"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="625"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="652"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="784"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="784"/>
<source>S:</source>
<translation>S:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
<source>V:</source>
<translation>V:</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
<source>Document</source>
<translation>Document</translation>
</message>
11110,7 → 11094,8
<context>
<name>Canvas</name>
<message>
<location filename="../../scribus/canvas.cpp" line="2243"/>
<location filename="../../../scribus/canvas.cpp" line="2331"/>
<location filename="../../../scribus/canvas.cpp" line="2359"/>
<source>X: %1
Y: %2</source>
<translation>X: %1
11117,17 → 11102,17
Y: %2</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2228"/>
<location filename="../../../scribus/canvas.cpp" line="2344"/>
<source>X: %1</source>
<translation>X: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2235"/>
<location filename="../../../scribus/canvas.cpp" line="2351"/>
<source>Y: %1</source>
<translation>Y: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2251"/>
<location filename="../../../scribus/canvas.cpp" line="2367"/>
<source>Length: %1
Angle: %2</source>
<translation>Length: %1
11134,27 → 11119,32
Angle: %2</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2253"/>
<location filename="../../../scribus/canvas.cpp" line="2369"/>
<source>Width: %1
Height: %2</source>
<translation>Width: %1
Height: %2</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2381"/>
<source>Angle: %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CanvasMode_EyeDropper</name>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="167"/>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="166"/>
<source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
<translation>The selected colour does not exist in the document&apos;s colour set. Please enter a name for this new colour.</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="170"/>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="169"/>
<source>Color Not Found</source>
<translation>Colour Not Found</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="174"/>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="173"/>
<source>The name you have selected already exists. Please enter a different name for this new color.</source>
<translation>The name you have selected already exists. Please enter a different name for this new colour.</translation>
</message>
11162,280 → 11152,261
<context>
<name>CanvasMode_Normal</name>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1331"/>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1292"/>
<source>All Supported Formats</source>
<translation>All Supported Formats</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1362"/>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1323"/>
<source>Open</source>
<translation>Open</translation>
</message>
</context>
<context>
<name>CgmPlug</name>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="85"/>
<source>Importing: %1</source>
<translation type="unfinished">Importing: %1</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="88"/>
<source>Analyzing File:</source>
<translation type="unfinished">Analysing File:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="213"/>
<source>Group%1</source>
<translation type="unfinished">Group%1</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="361"/>
<source>Generating Items</source>
<translation type="unfinished">Generating Items</translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<location filename="../../scribus/charselect.ui" line="100"/>
<source>Font:</source>
<translation type="obsolete">Font:</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="123"/>
<source>Character Class:</source>
<translation type="obsolete">Character Class:</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="203"/>
<source>&amp;Insert</source>
<translation type="obsolete">&amp;Insert</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="213"/>
<source>C&amp;lear</source>
<translation type="obsolete">C&amp;lear</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="200"/>
<source>Insert the characters at the cursor in the text</source>
<translation type="obsolete">Insert the characters at the cursor in the text</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="210"/>
<source>Delete the current selection(s).</source>
<translation type="obsolete">Delete the current selection(s).</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="250"/>
<source>Full Character Set</source>
<translation type="obsolete">Full Character Set</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="255"/>
<source>Basic Latin</source>
<translation type="obsolete">Basic Latin</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="261"/>
<source>Latin-1 Supplement</source>
<translation type="obsolete">Latin-1 Supplement</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="267"/>
<source>Latin Extended-A</source>
<translation type="obsolete">Latin Extended-A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="273"/>
<source>Latin Extended-B</source>
<translation type="obsolete">Latin Extended-B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="279"/>
<source>General Punctuation</source>
<translation type="obsolete">General Punctuation</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="285"/>
<source>Super- and Subscripts</source>
<translation type="obsolete">Super- and Subscripts</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="291"/>
<source>Currency Symbols</source>
<translation type="obsolete">Currency Symbols</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="297"/>
<source>Letterlike Symbols</source>
<translation type="obsolete">Letterlike Symbols</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="303"/>
<source>Number Forms</source>
<translation type="obsolete">Number Forms</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="309"/>
<source>Arrows</source>
<translation type="obsolete">Arrows</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="315"/>
<source>Mathematical Operators</source>
<translation type="obsolete">Mathematical Operators</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="321"/>
<source>Box Drawing</source>
<translation type="obsolete">Box Drawing</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="327"/>
<source>Block Elements</source>
<translation type="obsolete">Block Elements</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="333"/>
<source>Geometric Shapes</source>
<translation type="obsolete">Geometric Shapes</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="339"/>
<source>Miscellaneous Symbols</source>
<translation type="obsolete">Miscellaneous Symbols</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="345"/>
<source>Dingbats</source>
<translation type="obsolete">Dingbats</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="351"/>
<source>Small Form Variants</source>
<translation type="obsolete">Small Form Variants</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="357"/>
<source>Ligatures</source>
<translation type="obsolete">Ligatures</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="363"/>
<source>Specials</source>
<translation type="obsolete">Specials</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="369"/>
<source>Greek</source>
<translation type="obsolete">Greek</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="375"/>
<source>Greek Extended</source>
<translation type="obsolete">Greek Extended</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="381"/>
<source>Cyrillic</source>
<translation type="obsolete">Cyrillic</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="387"/>
<source>Cyrillic Supplement</source>
<translation type="obsolete">Cyrillic Supplement</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="393"/>
<source>Arabic</source>
<translation type="obsolete">Arabic</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="399"/>
<source>Arabic Extended A</source>
<translation type="obsolete">Arabic Extended A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="405"/>
<source>Arabic Extended B</source>
<translation type="obsolete">Arabic Extended B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="411"/>
<source>Hebrew</source>
<translation type="obsolete">Hebrew</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="164"/>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="31"/>
<location filename="../../../scribus/ui/charselect.cpp" line="31"/>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation>Scribus Char Palette (*.ucp);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="88"/>
<source>Enhanced Palette</source>
<translation type="obsolete">Enhanced Palette</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="19"/>
<source>Quick Palette</source>
<translation type="obsolete">Quick Palette</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="0"/>
<source>Hide Enhanced</source>
<translation type="obsolete">Hide Enhanced</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="226"/>
<location filename="../../../scribus/ui/charselect.cpp" line="226"/>
<source>Choose a filename to open</source>
<translation>Choose a filename to open</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="297"/>
<location filename="../../../scribus/ui/charselect.cpp" line="255"/>
<location filename="../../../scribus/ui/charselect.cpp" line="297"/>
<source>Error</source>
<translation>Error</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="256"/>
<location filename="../../../scribus/ui/charselect.cpp" line="256"/>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation>Error reading file %1 - file is corrupted propably.</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="625"/>
<source>Choose a filename to save under</source>
<translation type="obsolete">Choose a filename to save under</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="298"/>
<location filename="../../../scribus/ui/charselect.cpp" line="298"/>
<source>Cannot write file %1</source>
<translation>Cannot write file %1</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="0"/>
<source>Clean the Palette?</source>
<translation type="obsolete">Clean the Palette?</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="0"/>
<source>You will clean all characters from this palette. Are you sure?</source>
<translation type="obsolete">You will clean all characters from this palette. Are you sure?</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="13"/>
<location filename="../../../scribus/ui/charselect.ui" line="13"/>
<source>Character Palette</source>
<translation>Character Palette</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="0"/>
<source>&amp;Search</source>
<translation type="obsolete">&amp;Search</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="306"/>
<location filename="../../../scribus/ui/charselect.cpp" line="306"/>
<source>Empty the Palette?</source>
<translation>Empty the Palette?</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="307"/>
<location filename="../../../scribus/ui/charselect.cpp" line="307"/>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation>You will remove all characters from this palette. Are you sure?</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="24"/>
<location filename="../../../scribus/ui/charselect.ui" line="24"/>
<source>Hide/Show Enhanced Palette</source>
<translation>Hide/Show Enhanced Palette</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="272"/>
<location filename="../../../scribus/ui/charselect.cpp" line="272"/>
<source>Save Quick Character Palette</source>
<translation>Save Quick Character Palette</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="152"/>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">You can see a thumbnail if you press and hold down the right mouse button.The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</translation>
11444,162 → 11415,162
<context>
<name>CharSelectEnhanced</name>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="205"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="205"/>
<source>Full Character Set</source>
<translation>Full Character Set</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="210"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="210"/>
<source>Basic Latin</source>
<translation>Basic Latin</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="216"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="216"/>
<source>Latin-1 Supplement</source>
<translation>Latin-1 Supplement</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="222"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="222"/>
<source>Latin Extended-A</source>
<translation>Latin Extended-A</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="228"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="228"/>
<source>Latin Extended-B</source>
<translation>Latin Extended-B</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="234"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="234"/>
<source>General Punctuation</source>
<translation>General Punctuation</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="240"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="240"/>
<source>Super- and Subscripts</source>
<translation>Super- and Subscripts</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="246"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="246"/>
<source>Currency Symbols</source>
<translation>Currency Symbols</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="252"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="252"/>
<source>Letterlike Symbols</source>
<translation>Letterlike Symbols</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="258"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="258"/>
<source>Number Forms</source>
<translation>Number Forms</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="264"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="264"/>
<source>Arrows</source>
<translation>Arrows</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="270"/>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="270"/>
<source>Mathematical Operators</source>
<translation>Mathematical Operators</translation>
</message>
<message>
<location filename="../../scrib