Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 15293 → Rev 15294

/trunk/Scribus/resources/translations/po/scribus.fr.ts
1950,7 → 1950,7
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
Returns a tuple with document page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
1957,7 → 1957,7
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
<source>getPageNSize(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
1966,8 → 1966,17
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
<source>getPageMargins()
 
Returns the document page margins as a (top, left, right, bottom) tuple in the document&apos;s current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageNMargins(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
1974,7 → 1983,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="200"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
1985,15 → 1994,6
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
4335,12 → 4335,12
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="650"/>
<location filename="../../../scribus/ui/about.cpp" line="654"/>
<source>Check for Updates</source>
<translation>Recherche les mises à jour</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="648"/>
<location filename="../../../scribus/ui/about.cpp" line="652"/>
<source>Abort Update Check</source>
<translation>Interrompre la recherche de mise à jour</translation>
</message>
4370,9 → 4370,9
<translation>Webmestres :</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="448"/>
<location filename="../../../scribus/ui/about.cpp" line="560"/>
<location filename="../../../scribus/ui/about.cpp" line="626"/>
<location filename="../../../scribus/ui/about.cpp" line="449"/>
<location filename="../../../scribus/ui/about.cpp" line="563"/>
<location filename="../../../scribus/ui/about.cpp" line="630"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Impossible d&apos;ouvrir le fichier %1. Consultez le répertoire d&apos;installation ou le site web de Scribus pour obtenir les informations sur le fichier %1.</translation>
</message>
6215,12 → 6215,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="475"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="474"/>
<source>Y: %1%2</source>
<translation>Y : %1%2</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="483"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="482"/>
<source>X: %1%2</source>
<translation>X : %1%2</translation>
</message>
16438,9 → 16438,8
<translation>(Dé)verrouille le calque. Décocher pour déverrouiller</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation>Habillage du texte autour des objets des calques inférieurs. Si activé, le texte habillera les objets, même ceux des calques en dessous</translation>
<translation type="obsolete">Habillage du texte autour des objets des calques inférieurs. Si activé, le texte habillera les objets, même ceux des calques en dessous</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="609"/>
16486,6 → 16485,11
<translation>Placer le calque au-dessous</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="610"/>
<source>Name of the Layer - Double click on the name of a layer to edit the name</source>
<translation>Nom du calque. Double-cliquer sur le nom pour le modifier</translation>
18990,42 → 18994,42
<translation>Export des objets de la page courante :</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="184"/>
<location filename="../../../scribus/pdflib_core.cpp" line="187"/>
<source>Qt build miss both &quot;UTF-16&quot; and &quot;ISO-10646-UCS-2&quot; text codecs, pdf export is not possible</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2843"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2847"/>
<source>Page:</source>
<translation>Page :</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2856"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2860"/>
<source>Date:</source>
<translation>Date :</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10342"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10346"/>
<source>Failed to load an image : %1</source>
<translation>Erreur lors du chargement d&apos;une image : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to write an image : %1</source>
<translation>Erreur lors de l&apos;écriture d&apos;une image : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10352"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10356"/>
<source>Failed to load an image mask : %1</source>
<translation>Erreur lors du chargement d&apos;un masque d&apos;image : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10357"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10361"/>
<source>Insufficient memory for processing an image</source>
<translation>Mémoire insuffisante pour traiter une image</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10337"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10341"/>
<source>A write error occurred, please check available disk space</source>
<translation>Une erreur d&apos;écriture s&apos;est produite, veuillez contrôler l&apos;espace disque disponible</translation>
</message>
26697,7 → 26701,7
</message>
<message>
<location filename="../../../scribus/ui/prefs_scrapbook.cpp" line="28"/>
<source>The minimum number is 1; the maximum us 100</source>
<source>The minimum number is 1; the maximum is 100</source>
<translation type="unfinished"></translation>
</message>
</context>
30429,12 → 30433,12
<translation>Jaune</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="48"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="54"/>
<source>Freetype2 library not available</source>
<translation>Bibliothèque Freetype2 non disponible</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="313"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="319"/>
<location filename="../../../scribus/fonts/scface_ttf.cpp" line="585"/>
<source>Font %1 is broken (read stream), no embedding</source>
<translation>La police %1 est défectueuse (flux de lecture), elle sera ignorée</translation>
30445,7 → 30449,7
<translation>La police %1 est défectueuse, elle sera ignorée</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="129"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="135"/>
<location filename="../../../scribus/scfonts.cpp" line="361"/>
<location filename="../../../scribus/scfonts.cpp" line="398"/>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
30548,27 → 30552,27
<translation>Initialisation...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<location filename="../../../scribus/scribus.cpp" line="612"/>
<source>Scribus Development Version</source>
<translation>Version de développement de Scribus</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3421"/>
<location filename="../../../scribus/scribus.cpp" line="3424"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation>&lt;p&gt;Vous essayez d&apos;importer plus de pages que disponibles dans le document, de la page courante à la fin.&lt;/p&gt;Les choix possibles sont :&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Créer&lt;/b&gt; les pages manquantes&lt;/li&gt;&lt;li&gt;&lt;b&gt;Importer&lt;/b&gt; les pages jusqu&apos;à la dernière page du document&lt;/li&gt;&lt;li&gt;&lt;b&gt;Annuler&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3425"/>
<location filename="../../../scribus/scribus.cpp" line="3428"/>
<source>C&amp;reate</source>
<translation>C&amp;réer</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3426"/>
<location filename="../../../scribus/scribus.cpp" line="3429"/>
<source>&amp;Import</source>
<translation>&amp;Importer</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4167"/>
<location filename="../../../scribus/scribus.cpp" line="4170"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>Les changements dans votre document n&apos;ont pas été enregistrés et vous souhaitez revenir à la version enregistrée. Souhaitez-vous continuer ?</translation>
</message>
30708,8 → 30712,8
</message>
<message>
<location filename="../../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../../scribus/scribus.cpp" line="1670"/>
<location filename="../../../scribus/scribus.cpp" line="1956"/>
<location filename="../../../scribus/scribus.cpp" line="1673"/>
<location filename="../../../scribus/scribus.cpp" line="1959"/>
<source>Document Template: </source>
<translation>Modèle de document :</translation>
</message>
31233,12 → 31237,17
<translation>L&apos;argument contient des valeurs non-numériques : il doit être une liste de nombres décimaux.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</source>
<comment>python error</comment>
<translation>Épaisseur de filet hors limite. La valeur doit être comprise entre 0 et 12 inclusivement.</translation>
<translation type="obsolete">Épaisseur de filet hors limite. La valeur doit être comprise entre 0 et 12 inclusivement.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 300.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="266"/>
<source>Line shade out of bounds, must be 0 &lt;= shade &lt;= 100.</source>
<comment>python error</comment>
31797,8 → 31806,8
<translation>Japonais</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="63"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="80"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="69"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="86"/>
<source>Font %1(%2) is broken</source>
<translation>La police %1 (%2) est défectueuse</translation>
</message>
32036,7 → 32045,7
<translation>%1 est peut-être corrompu : balises de résolution manquantes</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="177"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="183"/>
<source>Font %1 has broken glyph %2</source>
<translation>La police %1 possède un caractère défectueux %2</translation>
</message>
32076,7 → 32085,7
<translation>Impossible d&apos;obtenir le nombre de lignes d&apos;un cadre autre que de texte.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="614"/>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<source>You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation>Vous utilisez une version de développement de Scribus 1.3.x. Le document sur lequel vous travaillez a été créé avec Scribus 1.2.x. Si vous l&apos;enregistrez avec cette version de Scribus, il ne sera plus utilisable avec les versions 1.2.x de Scribus. Afin de pouvoir ouvrir le document original avec une version 1.2.x, enregistrez-le sous un autre nom et continuez à travailler avec ce dernier; le document original ne sera pas modifié. Etes-vous sûr de vouloir continuer cette opération ?</translation>
</message>
34983,7 → 34992,7
<translation type="obsolete">Modifier</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>Fatal Error</source>
<translation>Erreur fatale</translation>
</message>
34992,17 → 35001,17
<translation type="obsolete">&amp;Fichier</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="629"/>
<location filename="../../../scribus/scribus.cpp" line="628"/>
<source>Open &amp;Recent</source>
<translation>Documents &amp;récents</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="637"/>
<location filename="../../../scribus/scribus.cpp" line="636"/>
<source>&amp;Import</source>
<translation>&amp;Importer</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="644"/>
<location filename="../../../scribus/scribus.cpp" line="643"/>
<source>&amp;Export</source>
<translation>E&amp;xporter</translation>
</message>
35039,22 → 35048,22
<translation type="obsolete">&amp;Objet</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="746"/>
<location filename="../../../scribus/scribus.cpp" line="745"/>
<source>Preview Settings</source>
<translation>Paramètres de l&apos;aperçu</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="729"/>
<location filename="../../../scribus/scribus.cpp" line="728"/>
<source>Level</source>
<translation>Niveau</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="735"/>
<location filename="../../../scribus/scribus.cpp" line="734"/>
<source>Send to La&amp;yer</source>
<translation>Mettre sur le cal&amp;que</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="754"/>
<location filename="../../../scribus/scribus.cpp" line="753"/>
<source>&amp;PDF Options</source>
<translation>&amp;Options PDF</translation>
</message>
35063,7 → 35072,7
<translation type="obsolete">Forme (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="760"/>
<location filename="../../../scribus/scribus.cpp" line="759"/>
<source>C&amp;onvert To</source>
<translation>Conve&amp;rtir en</translation>
</message>
35104,55 → 35113,55
<translation type="obsolete">&amp;Alignement</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1694"/>
<location filename="../../../scribus/scribus.cpp" line="1734"/>
<location filename="../../../scribus/scribus.cpp" line="3873"/>
<location filename="../../../scribus/scribus.cpp" line="4268"/>
<location filename="../../../scribus/scribus.cpp" line="4482"/>
<location filename="../../../scribus/scribus.cpp" line="4621"/>
<location filename="../../../scribus/scribus.cpp" line="9390"/>
<location filename="../../../scribus/scribus.cpp" line="1697"/>
<location filename="../../../scribus/scribus.cpp" line="1737"/>
<location filename="../../../scribus/scribus.cpp" line="3876"/>
<location filename="../../../scribus/scribus.cpp" line="4271"/>
<location filename="../../../scribus/scribus.cpp" line="4485"/>
<location filename="../../../scribus/scribus.cpp" line="4624"/>
<location filename="../../../scribus/scribus.cpp" line="9397"/>
<source>Ready</source>
<translation>Prêt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2490"/>
<location filename="../../../scribus/scribus.cpp" line="2493"/>
<source>1 Object selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2492"/>
<location filename="../../../scribus/scribus.cpp" line="2495"/>
<source>%1 Objects selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3268"/>
<location filename="../../../scribus/scribus.cpp" line="3376"/>
<location filename="../../../scribus/scribus.cpp" line="3964"/>
<location filename="../../../scribus/scribus.cpp" line="3271"/>
<location filename="../../../scribus/scribus.cpp" line="3379"/>
<location filename="../../../scribus/scribus.cpp" line="3967"/>
<source>Open</source>
<translation>Ouvrir</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3391"/>
<location filename="../../../scribus/scribus.cpp" line="3394"/>
<source>Importing Pages...</source>
<translation>Importation des pages...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3420"/>
<location filename="../../../scribus/scribus.cpp" line="3423"/>
<source>Import Page(s)</source>
<translation>Importer une(des) page(s)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3462"/>
<location filename="../../../scribus/scribus.cpp" line="3465"/>
<source>Import done</source>
<translation>Importation réussie</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3466"/>
<location filename="../../../scribus/scribus.cpp" line="3469"/>
<source>Found nothing to import</source>
<translation>Aucun objet trouvé pour l&apos;importation</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3554"/>
<location filename="../../../scribus/scribus.cpp" line="3557"/>
<source>File does not exist on the specified path :
%1</source>
<translatorcomment>Le fichier en question existe peut-être.</translatorcomment>
35160,12 → 35169,12
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>File %1 is not in an acceptable format</source>
<translation>Le fichier %1 n&apos;est pas au format Scribus</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3620"/>
<location filename="../../../scribus/scribus.cpp" line="3623"/>
<source>Loading...</source>
<translation>Chargement...</translation>
</message>
35178,31 → 35187,31
<translation type="obsolete">Certains profils ICC utilisés dans ce document ne sont pas installés :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<location filename="../../../scribus/scribus.cpp" line="3771"/>
<source> was replaced by: </source>
<translation>a été remplacé par :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3800"/>
<location filename="../../../scribus/scribus.cpp" line="3803"/>
<source>(converted)</source>
<translation>(converti)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>Filename and Path for Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>All Files (*)</source>
<translation type="unfinished">Tous les fichiers (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4202"/>
<location filename="../../../scribus/scribus.cpp" line="4263"/>
<location filename="../../../scribus/scribus.cpp" line="7971"/>
<location filename="../../../scribus/scribus.cpp" line="8105"/>
<location filename="../../../scribus/scribus.cpp" line="8127"/>
<location filename="../../../scribus/scribus.cpp" line="4205"/>
<location filename="../../../scribus/scribus.cpp" line="4266"/>
<location filename="../../../scribus/scribus.cpp" line="7978"/>
<location filename="../../../scribus/scribus.cpp" line="8112"/>
<location filename="../../../scribus/scribus.cpp" line="8134"/>
<source>Cannot write the file:
%1</source>
<translation>Impossible d&apos;enregistrer le fichier :
35209,20 → 35218,20
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4248"/>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="4251"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>Save As</source>
<translation>Enregistrer sous</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4277"/>
<location filename="../../../scribus/scribus.cpp" line="4280"/>
<source>Saving...</source>
<translation>Enregistrement...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4533"/>
<location filename="../../../scribus/scribus.cpp" line="7824"/>
<location filename="../../../scribus/scribus.cpp" line="4536"/>
<location filename="../../../scribus/scribus.cpp" line="7831"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Scribus a détecté quelques erreurs. Le &quot;Vérificateur&quot; pourra vous aider à les corriger</translation>
</message>
35235,39 → 35244,39
<translation type="obsolete">&amp;Annuler</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4566"/>
<location filename="../../../scribus/scribus.cpp" line="4569"/>
<source>Printing...</source>
<translation>Impression en cours...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1839"/>
<location filename="../../../scribus/scribus.cpp" line="4570"/>
<location filename="../../../scribus/scribus.cpp" line="7939"/>
<location filename="../../../scribus/scribus.cpp" line="1842"/>
<location filename="../../../scribus/scribus.cpp" line="4573"/>
<location filename="../../../scribus/scribus.cpp" line="7946"/>
<source>Document</source>
<translation>Document</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4607"/>
<location filename="../../../scribus/scribus.cpp" line="4610"/>
<source>Printing failed!</source>
<translation>Impossible d&apos;imprimer !</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>Cannot Cut In-Use Item</source>
<translation>Impossible de couper un objet utilisé</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>L&apos;objet %1 est en cours d&apos;édition dans l&apos;éditeur interne. L&apos;opération &apos;couper&apos; va être annulée</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5274"/>
<location filename="../../../scribus/scribus.cpp" line="5281"/>
<source>About Qt</source>
<translation>À propos de Qt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5285"/>
<location filename="../../../scribus/scribus.cpp" line="5292"/>
<source>Scribus Manual</source>
<translation>Manuel de Scribus</translation>
</message>
35276,7 → 35285,7
<translation type="obsolete">Enregistrer sous</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<source>Text Files (*.txt);;All Files(*)</source>
<translation>Fichiers texte (*.txt);;Tous les fichiers (*)</translation>
</message>
35293,27 → 35302,27
<translation type="obsolete">Nouveau gabarit %1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>&amp;Size:</source>
<translation>&amp;Taille :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>Size</source>
<translation>Corps</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>&amp;Shade:</source>
<translation>&amp;Teinte :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>Shade</source>
<translation>Teinte</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6893"/>
<location filename="../../../scribus/scribus.cpp" line="6900"/>
<source>No Style</source>
<translation>Aucun style</translation>
</message>
35334,12 → 35343,12
<translation type="obsolete">Ghostscript est introuvable : l&apos;aperçu d&apos;impression PostScript n&apos;est pas disponible.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7860"/>
<location filename="../../../scribus/scribus.cpp" line="7867"/>
<source>All</source>
<translation>Tout</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7908"/>
<location filename="../../../scribus/scribus.cpp" line="7915"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation>Des erreurs ont été trouvées.
35350,7 → 35359,7
<translation type="obsolete">Fichiers EPS (*.eps);;</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8005"/>
<location filename="../../../scribus/scribus.cpp" line="8012"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation>Des erreurs ont été trouvées.
35357,74 → 35366,74
Utilisez le vérificateur afin de les corriger</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8101"/>
<location filename="../../../scribus/scribus.cpp" line="8108"/>
<source>-Page%1</source>
<translation>-Page%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8511"/>
<location filename="../../../scribus/scribus.cpp" line="8518"/>
<source>Some objects are locked.</source>
<translation>Un ou des objets sont verrouillés.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8507"/>
<location filename="../../../scribus/scribus.cpp" line="8514"/>
<source>&amp;Lock All</source>
<translation>Tout &amp;verrouiller</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7432"/>
<location filename="../../../scribus/scribus.cpp" line="7565"/>
<location filename="../../../scribus/scribus.cpp" line="7439"/>
<location filename="../../../scribus/scribus.cpp" line="7572"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7710"/>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<source>Ghostscript is not installed on your system, or Scribus is not configured with the path to the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7713"/>
<location filename="../../../scribus/scribus.cpp" line="7720"/>
<source>Until this is remedied, you cannot import EPS images or use Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7715"/>
<location filename="../../../scribus/scribus.cpp" line="7722"/>
<source>Until this is remedied, you cannot import EPS images or use PostScript Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<location filename="../../../scribus/scribus.cpp" line="7724"/>
<source>Please read our &lt;a href=&quot;http://wiki.scribus.net/index.php/Ghostscript&quot;&gt;help and installation instructions&lt;/a&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7721"/>
<location filename="../../../scribus/scribus.cpp" line="7728"/>
<source>Ghostscript is missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8142"/>
<location filename="../../../scribus/scribus.cpp" line="8149"/>
<source>Locate your PDF viewer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8508"/>
<location filename="../../../scribus/scribus.cpp" line="8515"/>
<source>&amp;Unlock All</source>
<translation>To&amp;ut déverrouiller</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>The program %1 is already running!</source>
<translation>Le programme %1 est déjà en cours de fonctionnement !</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9271"/>
<location filename="../../../scribus/scribus.cpp" line="9278"/>
<source>The program %1 is missing!</source>
<translation>Le programme %1 est absent !</translation>
</message>
35461,50 → 35470,50
<translation type="obsolete">Ou&amp;tils</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9386"/>
<location filename="../../../scribus/scribus.cpp" line="1009"/>
<location filename="../../../scribus/scribus.cpp" line="9393"/>
<source>X-Pos:</source>
<translation>X :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1011"/>
<location filename="../../../scribus/scribus.cpp" line="9387"/>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9394"/>
<source>Y-Pos:</source>
<translation>Y :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4044"/>
<location filename="../../../scribus/scribus.cpp" line="9608"/>
<location filename="../../../scribus/scribus.cpp" line="4047"/>
<location filename="../../../scribus/scribus.cpp" line="9615"/>
<source>Do you really want to replace your existing image?</source>
<translation>Voulez-vous vraiment remplacer l&apos;image actuelle ?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="671"/>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<source>Contents</source>
<translation>Contenu</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="798"/>
<location filename="../../../scribus/scribus.cpp" line="797"/>
<source>&amp;Character</source>
<translation>&amp;Caractère</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="816"/>
<location filename="../../../scribus/scribus.cpp" line="815"/>
<source>&amp;Quote</source>
<translation>P&amp;onctuation</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="841"/>
<location filename="../../../scribus/scribus.cpp" line="840"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>Es&amp;paces et sauts</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="855"/>
<location filename="../../../scribus/scribus.cpp" line="854"/>
<source>Liga&amp;ture</source>
<translation>Liga&amp;ture</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<location filename="../../../scribus/scribus.cpp" line="669"/>
<source>Paste Recent</source>
<translation>Coller un élément récent</translation>
</message>
35513,7 → 35522,7
<translation type="obsolete">Mise à jour des images</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4246"/>
<location filename="../../../scribus/scribus.cpp" line="4249"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Documents (*.sla *.sla.gz);;Tous les fichiers (*)</translation>
</message>
35522,7 → 35531,7
<translation type="obsolete">Groupe %1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3992"/>
<location filename="../../../scribus/scribus.cpp" line="3995"/>
<source>Do you really want to clear all your text?</source>
<translation>Effacer l&apos;intégralité du texte ?</translation>
</message>
35532,17 → 35541,17
<translation>Scribus </translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="955"/>
<location filename="../../../scribus/scribus.cpp" line="954"/>
<source>Online &amp;Tutorials</source>
<translation>&amp;Tutoriels en ligne</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3765"/>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Certains des profils colorimétriques utilisés dans ce document ne sont pas installés :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>%1;;All Files (*)</source>
<translation>%1;;Tous les fichiers (*)</translation>
</message>
35552,14 → 35561,14
<translation>Applique les raccourcis-clavier faits sur mesure</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7589"/>
<location filename="../../../scribus/scribus.cpp" line="7666"/>
<location filename="../../../scribus/scribus.cpp" line="7596"/>
<location filename="../../../scribus/scribus.cpp" line="7673"/>
<source>Updating Images</source>
<translation>Mise à jour des images</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4200"/>
<location filename="../../../scribus/scribus.cpp" line="4261"/>
<location filename="../../../scribus/scribus.cpp" line="4203"/>
<location filename="../../../scribus/scribus.cpp" line="4264"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>Votre document a été enregistré dans un fichier temporaire et n&apos;a pu être déplacé:
35566,37 → 35575,37
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4662"/>
<location filename="../../../scribus/scribus.cpp" line="4665"/>
<source>Print engine initialization failed</source>
<translation>L’initialisation du moteur d’impression a échoué</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3239"/>
<location filename="../../../scribus/scribus.cpp" line="3242"/>
<source>All Supported Formats</source>
<translation>Tous les formats pris en charge</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>&amp;Name:</source>
<translation>&amp;Nom :</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>New Entry</source>
<translation>Nouvelle entrée</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7770"/>
<location filename="../../../scribus/scribus.cpp" line="7777"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation>Ghostscript est introuvable : l&apos;aperçu d&apos;impression PostScript n&apos;est pas disponible</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3582"/>
<location filename="../../../scribus/scribus.cpp" line="3585"/>
<source>Document is already opened</source>
<translation>Ce document est déja ouvert</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3583"/>
<location filename="../../../scribus/scribus.cpp" line="3586"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation>Ce document est déja en cours d&apos;utilisation. Sa fenêtre va maintenant être activée.</translation>
</message>
41203,12 → 41212,16
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="54"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="48"/>
<source>The minimum number is 1; the maximum is 100.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The minimum number is 1; the maximum us 100.</source>
<translation>Le minimum est 1 et le maximum est 100.</translation>
<translation type="obsolete">Le minimum est 1 et le maximum est 100.</translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="57"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="51"/>
<source>Number of Copied Items to Keep in Scrapbook:</source>
<translation>Nombre d&apos;objets copiés à conserver dans l&apos;album :</translation>
</message>