Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 15293 → Rev 15294

/trunk/Scribus/resources/translations/po/scribus.id.ts
1596,7 → 1596,7
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
Returns a tuple with document page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
1603,7 → 1603,7
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
<source>getPageNSize(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
1612,8 → 1612,17
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
<source>getPageMargins()
 
Returns the document page margins as a (top, left, right, bottom) tuple in the document&apos;s current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageNMargins(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
1620,7 → 1629,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="200"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
1631,15 → 1640,6
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
2676,12 → 2676,12
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="650"/>
<location filename="../../../scribus/ui/about.cpp" line="654"/>
<source>Check for Updates</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="648"/>
<location filename="../../../scribus/ui/about.cpp" line="652"/>
<source>Abort Update Check</source>
<translation type="unfinished"></translation>
</message>
2711,9 → 2711,9
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="448"/>
<location filename="../../../scribus/ui/about.cpp" line="560"/>
<location filename="../../../scribus/ui/about.cpp" line="626"/>
<location filename="../../../scribus/ui/about.cpp" line="449"/>
<location filename="../../../scribus/ui/about.cpp" line="563"/>
<location filename="../../../scribus/ui/about.cpp" line="630"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation type="unfinished"></translation>
</message>
4485,12 → 4485,12
<translation type="obsolete">Peringatan</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="475"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="474"/>
<source>Y: %1%2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="483"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="482"/>
<source>X: %1%2</source>
<translation type="unfinished"></translation>
</message>
13050,11 → 13050,6
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="609"/>
<source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
<translation type="unfinished"></translation>
13080,6 → 13075,11
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="610"/>
<source>Name of the Layer - Double click on the name of a layer to edit the name</source>
<translation type="unfinished"></translation>
15451,42 → 15451,42
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="184"/>
<location filename="../../../scribus/pdflib_core.cpp" line="187"/>
<source>Qt build miss both &quot;UTF-16&quot; and &quot;ISO-10646-UCS-2&quot; text codecs, pdf export is not possible</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2843"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2847"/>
<source>Page:</source>
<translation type="unfinished">Halaman:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2856"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2860"/>
<source>Date:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10342"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10346"/>
<source>Failed to load an image : %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to write an image : %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10352"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10356"/>
<source>Failed to load an image mask : %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10357"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10361"/>
<source>Insufficient memory for processing an image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10337"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10341"/>
<source>A write error occurred, please check available disk space</source>
<translation type="unfinished"></translation>
</message>
23007,7 → 23007,7
</message>
<message>
<location filename="../../../scribus/ui/prefs_scrapbook.cpp" line="28"/>
<source>The minimum number is 1; the maximum us 100</source>
<source>The minimum number is 1; the maximum is 100</source>
<translation type="unfinished"></translation>
</message>
</context>
26802,7 → 26802,7
<translation type="obsolete">Atur Sendiri</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<location filename="../../../scribus/scribus.cpp" line="612"/>
<source>Scribus Development Version</source>
<translation type="unfinished"></translation>
</message>
26996,7 → 26996,7
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</source>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 300.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
27204,18 → 27204,18
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="48"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="54"/>
<source>Freetype2 library not available</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="313"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="319"/>
<location filename="../../../scribus/fonts/scface_ttf.cpp" line="585"/>
<source>Font %1 is broken (read stream), no embedding</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="129"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="135"/>
<location filename="../../../scribus/scfonts.cpp" line="361"/>
<location filename="../../../scribus/scfonts.cpp" line="398"/>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
27310,8 → 27310,8
</message>
<message>
<location filename="../../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../../scribus/scribus.cpp" line="1670"/>
<location filename="../../../scribus/scribus.cpp" line="1956"/>
<location filename="../../../scribus/scribus.cpp" line="1673"/>
<location filename="../../../scribus/scribus.cpp" line="1959"/>
<source>Document Template: </source>
<translation type="unfinished"></translation>
</message>
27519,7 → 27519,7
<translation type="unfinished">Mencari Font</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4167"/>
<location filename="../../../scribus/scribus.cpp" line="4170"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation type="unfinished"></translation>
</message>
27555,17 → 27555,17
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3421"/>
<location filename="../../../scribus/scribus.cpp" line="3424"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3425"/>
<location filename="../../../scribus/scribus.cpp" line="3428"/>
<source>C&amp;reate</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3426"/>
<location filename="../../../scribus/scribus.cpp" line="3429"/>
<source>&amp;Import</source>
<translation type="unfinished"></translation>
</message>
27620,8 → 27620,8
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="63"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="80"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="69"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="86"/>
<source>Font %1(%2) is broken</source>
<translation type="unfinished"></translation>
</message>
27858,7 → 27858,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="177"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="183"/>
<source>Font %1 has broken glyph %2</source>
<translation type="unfinished"></translation>
</message>
27894,7 → 27894,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="614"/>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<source>You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation type="unfinished"></translation>
</message>
30911,22 → 30911,22
<translation type="obsolete">Mencari Font</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>Fatal Error</source>
<translation type="unfinished">Kesalahan Fatal</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="629"/>
<location filename="../../../scribus/scribus.cpp" line="628"/>
<source>Open &amp;Recent</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="637"/>
<location filename="../../../scribus/scribus.cpp" line="636"/>
<source>&amp;Import</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="644"/>
<location filename="../../../scribus/scribus.cpp" line="643"/>
<source>&amp;Export</source>
<translation type="unfinished"></translation>
</message>
30939,27 → 30939,27
<translation type="obsolete">&amp;Font</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="746"/>
<location filename="../../../scribus/scribus.cpp" line="745"/>
<source>Preview Settings</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="729"/>
<location filename="../../../scribus/scribus.cpp" line="728"/>
<source>Level</source>
<translation type="unfinished">Level</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="735"/>
<location filename="../../../scribus/scribus.cpp" line="734"/>
<source>Send to La&amp;yer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="754"/>
<location filename="../../../scribus/scribus.cpp" line="753"/>
<source>&amp;PDF Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="760"/>
<location filename="../../../scribus/scribus.cpp" line="759"/>
<source>C&amp;onvert To</source>
<translation type="unfinished"></translation>
</message>
30968,151 → 30968,151
<translation type="obsolete">Karakter</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1694"/>
<location filename="../../../scribus/scribus.cpp" line="1734"/>
<location filename="../../../scribus/scribus.cpp" line="3873"/>
<location filename="../../../scribus/scribus.cpp" line="4268"/>
<location filename="../../../scribus/scribus.cpp" line="4482"/>
<location filename="../../../scribus/scribus.cpp" line="4621"/>
<location filename="../../../scribus/scribus.cpp" line="9390"/>
<location filename="../../../scribus/scribus.cpp" line="1697"/>
<location filename="../../../scribus/scribus.cpp" line="1737"/>
<location filename="../../../scribus/scribus.cpp" line="3876"/>
<location filename="../../../scribus/scribus.cpp" line="4271"/>
<location filename="../../../scribus/scribus.cpp" line="4485"/>
<location filename="../../../scribus/scribus.cpp" line="4624"/>
<location filename="../../../scribus/scribus.cpp" line="9397"/>
<source>Ready</source>
<translation type="unfinished">Siap</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2490"/>
<location filename="../../../scribus/scribus.cpp" line="2493"/>
<source>1 Object selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2492"/>
<location filename="../../../scribus/scribus.cpp" line="2495"/>
<source>%1 Objects selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3268"/>
<location filename="../../../scribus/scribus.cpp" line="3376"/>
<location filename="../../../scribus/scribus.cpp" line="3964"/>
<location filename="../../../scribus/scribus.cpp" line="3271"/>
<location filename="../../../scribus/scribus.cpp" line="3379"/>
<location filename="../../../scribus/scribus.cpp" line="3967"/>
<source>Open</source>
<translation type="unfinished">Buka</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3391"/>
<location filename="../../../scribus/scribus.cpp" line="3394"/>
<source>Importing Pages...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3420"/>
<location filename="../../../scribus/scribus.cpp" line="3423"/>
<source>Import Page(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3462"/>
<location filename="../../../scribus/scribus.cpp" line="3465"/>
<source>Import done</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3466"/>
<location filename="../../../scribus/scribus.cpp" line="3469"/>
<source>Found nothing to import</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3554"/>
<location filename="../../../scribus/scribus.cpp" line="3557"/>
<source>File does not exist on the specified path :
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>File %1 is not in an acceptable format</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3620"/>
<location filename="../../../scribus/scribus.cpp" line="3623"/>
<source>Loading...</source>
<translation type="unfinished">Memuat...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<location filename="../../../scribus/scribus.cpp" line="3771"/>
<source> was replaced by: </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3800"/>
<location filename="../../../scribus/scribus.cpp" line="3803"/>
<source>(converted)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>Filename and Path for Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4202"/>
<location filename="../../../scribus/scribus.cpp" line="4263"/>
<location filename="../../../scribus/scribus.cpp" line="7971"/>
<location filename="../../../scribus/scribus.cpp" line="8105"/>
<location filename="../../../scribus/scribus.cpp" line="8127"/>
<location filename="../../../scribus/scribus.cpp" line="4205"/>
<location filename="../../../scribus/scribus.cpp" line="4266"/>
<location filename="../../../scribus/scribus.cpp" line="7978"/>
<location filename="../../../scribus/scribus.cpp" line="8112"/>
<location filename="../../../scribus/scribus.cpp" line="8134"/>
<source>Cannot write the file:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4248"/>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="4251"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>Save As</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4277"/>
<location filename="../../../scribus/scribus.cpp" line="4280"/>
<source>Saving...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4533"/>
<location filename="../../../scribus/scribus.cpp" line="7824"/>
<location filename="../../../scribus/scribus.cpp" line="4536"/>
<location filename="../../../scribus/scribus.cpp" line="7831"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4566"/>
<location filename="../../../scribus/scribus.cpp" line="4569"/>
<source>Printing...</source>
<translation type="unfinished">Mencetak...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1839"/>
<location filename="../../../scribus/scribus.cpp" line="4570"/>
<location filename="../../../scribus/scribus.cpp" line="7939"/>
<location filename="../../../scribus/scribus.cpp" line="1842"/>
<location filename="../../../scribus/scribus.cpp" line="4573"/>
<location filename="../../../scribus/scribus.cpp" line="7946"/>
<source>Document</source>
<translation type="unfinished">Dokumen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4607"/>
<location filename="../../../scribus/scribus.cpp" line="4610"/>
<source>Printing failed!</source>
<translation type="unfinished">Pencetakan gagal!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>Cannot Cut In-Use Item</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5274"/>
<location filename="../../../scribus/scribus.cpp" line="5281"/>
<source>About Qt</source>
<translation type="unfinished">Tentang Qt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5285"/>
<location filename="../../../scribus/scribus.cpp" line="5292"/>
<source>Scribus Manual</source>
<translation type="unfinished">Manual Scribus</translation>
</message>
31121,7 → 31121,7
<translation type="obsolete">Simpan sebagai</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<source>Text Files (*.txt);;All Files(*)</source>
<translation type="unfinished"></translation>
</message>
31134,174 → 31134,174
<translation type="obsolete">Nama:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>&amp;Size:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>Size</source>
<translation type="unfinished">Ukuran</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>&amp;Shade:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>Shade</source>
<translation type="unfinished">Tingkat Kegelapan</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6893"/>
<location filename="../../../scribus/scribus.cpp" line="6900"/>
<source>No Style</source>
<translation type="unfinished">Tanpa Gaya</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7432"/>
<location filename="../../../scribus/scribus.cpp" line="7565"/>
<location filename="../../../scribus/scribus.cpp" line="7439"/>
<location filename="../../../scribus/scribus.cpp" line="7572"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7860"/>
<location filename="../../../scribus/scribus.cpp" line="7867"/>
<source>All</source>
<translation type="unfinished">Semua</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7908"/>
<location filename="../../../scribus/scribus.cpp" line="7915"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8005"/>
<location filename="../../../scribus/scribus.cpp" line="8012"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8101"/>
<location filename="../../../scribus/scribus.cpp" line="8108"/>
<source>-Page%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8142"/>
<location filename="../../../scribus/scribus.cpp" line="8149"/>
<source>Locate your PDF viewer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8511"/>
<location filename="../../../scribus/scribus.cpp" line="8518"/>
<source>Some objects are locked.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8507"/>
<location filename="../../../scribus/scribus.cpp" line="8514"/>
<source>&amp;Lock All</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7710"/>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<source>Ghostscript is not installed on your system, or Scribus is not configured with the path to the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7713"/>
<location filename="../../../scribus/scribus.cpp" line="7720"/>
<source>Until this is remedied, you cannot import EPS images or use Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7715"/>
<location filename="../../../scribus/scribus.cpp" line="7722"/>
<source>Until this is remedied, you cannot import EPS images or use PostScript Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<location filename="../../../scribus/scribus.cpp" line="7724"/>
<source>Please read our &lt;a href=&quot;http://wiki.scribus.net/index.php/Ghostscript&quot;&gt;help and installation instructions&lt;/a&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7721"/>
<location filename="../../../scribus/scribus.cpp" line="7728"/>
<source>Ghostscript is missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8508"/>
<location filename="../../../scribus/scribus.cpp" line="8515"/>
<source>&amp;Unlock All</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>Information</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>The program %1 is already running!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9271"/>
<location filename="../../../scribus/scribus.cpp" line="9278"/>
<source>The program %1 is missing!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9386"/>
<location filename="../../../scribus/scribus.cpp" line="1009"/>
<location filename="../../../scribus/scribus.cpp" line="9393"/>
<source>X-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1011"/>
<location filename="../../../scribus/scribus.cpp" line="9387"/>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9394"/>
<source>Y-Pos:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4044"/>
<location filename="../../../scribus/scribus.cpp" line="9608"/>
<location filename="../../../scribus/scribus.cpp" line="4047"/>
<location filename="../../../scribus/scribus.cpp" line="9615"/>
<source>Do you really want to replace your existing image?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="671"/>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<source>Contents</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="798"/>
<location filename="../../../scribus/scribus.cpp" line="797"/>
<source>&amp;Character</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="816"/>
<location filename="../../../scribus/scribus.cpp" line="815"/>
<source>&amp;Quote</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="841"/>
<location filename="../../../scribus/scribus.cpp" line="840"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="855"/>
<location filename="../../../scribus/scribus.cpp" line="854"/>
<source>Liga&amp;ture</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<location filename="../../../scribus/scribus.cpp" line="669"/>
<source>Paste Recent</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4246"/>
<location filename="../../../scribus/scribus.cpp" line="4249"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3992"/>
<location filename="../../../scribus/scribus.cpp" line="3995"/>
<source>Do you really want to clear all your text?</source>
<translation type="unfinished"></translation>
</message>
31311,17 → 31311,17
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="955"/>
<location filename="../../../scribus/scribus.cpp" line="954"/>
<source>Online &amp;Tutorials</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3765"/>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<source>Some color profiles used by this document are not installed:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>%1;;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
31331,50 → 31331,50
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7589"/>
<location filename="../../../scribus/scribus.cpp" line="7666"/>
<location filename="../../../scribus/scribus.cpp" line="7596"/>
<location filename="../../../scribus/scribus.cpp" line="7673"/>
<source>Updating Images</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4200"/>
<location filename="../../../scribus/scribus.cpp" line="4261"/>
<location filename="../../../scribus/scribus.cpp" line="4203"/>
<location filename="../../../scribus/scribus.cpp" line="4264"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4662"/>
<location filename="../../../scribus/scribus.cpp" line="4665"/>
<source>Print engine initialization failed</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3239"/>
<location filename="../../../scribus/scribus.cpp" line="3242"/>
<source>All Supported Formats</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>&amp;Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>New Entry</source>
<translation type="unfinished">Entri Baru</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7770"/>
<location filename="../../../scribus/scribus.cpp" line="7777"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3582"/>
<location filename="../../../scribus/scribus.cpp" line="3585"/>
<source>Document is already opened</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3583"/>
<location filename="../../../scribus/scribus.cpp" line="3586"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation type="unfinished"></translation>
</message>
36106,12 → 36106,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="54"/>
<source>The minimum number is 1; the maximum us 100.</source>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="48"/>
<source>The minimum number is 1; the maximum is 100.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="57"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="51"/>
<source>Number of Copied Items to Keep in Scrapbook:</source>
<translation type="unfinished"></translation>
</message>