Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 15293 → Rev 15294

/trunk/Scribus/resources/translations/po/scribus.ja.ts
1596,7 → 1596,7
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
Returns a tuple with document page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
1603,7 → 1603,7
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
<source>getPageNSize(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
1612,8 → 1612,17
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
<source>getPageMargins()
 
Returns the document page margins as a (top, left, right, bottom) tuple in the document&apos;s current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageNMargins(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
1620,7 → 1629,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="200"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
1631,15 → 1640,6
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
2640,12 → 2640,12
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="650"/>
<location filename="../../../scribus/ui/about.cpp" line="654"/>
<source>Check for Updates</source>
<translation>アップデートをチェック</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="648"/>
<location filename="../../../scribus/ui/about.cpp" line="652"/>
<source>Abort Update Check</source>
<translation>アップデートのチェックを中断</translation>
</message>
2675,9 → 2675,9
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="448"/>
<location filename="../../../scribus/ui/about.cpp" line="560"/>
<location filename="../../../scribus/ui/about.cpp" line="626"/>
<location filename="../../../scribus/ui/about.cpp" line="449"/>
<location filename="../../../scribus/ui/about.cpp" line="563"/>
<location filename="../../../scribus/ui/about.cpp" line="630"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation type="unfinished"></translation>
</message>
4456,12 → 4456,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="475"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="474"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="483"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="482"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
12711,11 → 12711,6
<translation>レイヤーをロック/ロック解除- チェック解除するとロック解除します</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="609"/>
<source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
<translation>アウトラインモード - 非常に複雑なオブジェクトの表示を速くするために&apos;ワイヤフレーム&apos;表示を切替えます。</translation>
12751,6 → 12746,11
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="610"/>
<source>Name of the Layer - Double click on the name of a layer to edit the name</source>
<translation type="unfinished"></translation>
14892,37 → 14892,37
<translation>現在のページのアイテムをエクスポート中:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="184"/>
<location filename="../../../scribus/pdflib_core.cpp" line="187"/>
<source>Qt build miss both &quot;UTF-16&quot; and &quot;ISO-10646-UCS-2&quot; text codecs, pdf export is not possible</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2843"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2847"/>
<source>Page:</source>
<translation>ページ:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2856"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2860"/>
<source>Date:</source>
<translation>日付:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10342"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10346"/>
<source>Failed to load an image : %1</source>
<translation>画像の読み込みに失敗しました : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to write an image : %1</source>
<translation>画像の書き込みに失敗しました : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10352"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10356"/>
<source>Failed to load an image mask : %1</source>
<translation>画像マスクの読み込みに失敗しました : %1</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10357"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10361"/>
<source>Insufficient memory for processing an image</source>
<translation>画像の処理に必要なメモリが足りません</translation>
</message>
14931,7 → 14931,7
<translation type="obsolete">書き込みエラーが発生しました。利用可能なディスク容量をチェックしてください。</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10337"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10341"/>
<source>A write error occurred, please check available disk space</source>
<translation type="unfinished"></translation>
</message>
22099,7 → 22099,7
</message>
<message>
<location filename="../../../scribus/ui/prefs_scrapbook.cpp" line="28"/>
<source>The minimum number is 1; the maximum us 100</source>
<source>The minimum number is 1; the maximum is 100</source>
<translation type="unfinished"></translation>
</message>
</context>
25457,12 → 25457,12
<translation>イエロー</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="48"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="54"/>
<source>Freetype2 library not available</source>
<translation>Freetype2ライブラリが利用可能ではありません</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="313"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="319"/>
<location filename="../../../scribus/fonts/scface_ttf.cpp" line="585"/>
<source>Font %1 is broken (read stream), no embedding</source>
<translation>フォント %1 は破損しているので(読み込みストリーム)、埋め込まれません</translation>
25473,7 → 25473,7
<translation>フォント %1 は破損しているので(フェースなし)、破棄されます</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="129"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="135"/>
<location filename="../../../scribus/scfonts.cpp" line="361"/>
<location filename="../../../scribus/scfonts.cpp" line="398"/>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
25576,27 → 25576,27
<translation>初期化中...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<location filename="../../../scribus/scribus.cpp" line="612"/>
<source>Scribus Development Version</source>
<translation>Scribus 開発バージョン</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3421"/>
<location filename="../../../scribus/scribus.cpp" line="3424"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3425"/>
<location filename="../../../scribus/scribus.cpp" line="3428"/>
<source>C&amp;reate</source>
<translation>作成(&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3426"/>
<location filename="../../../scribus/scribus.cpp" line="3429"/>
<source>&amp;Import</source>
<translation>インポート(&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4167"/>
<location filename="../../../scribus/scribus.cpp" line="4170"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>ドキュメントの変更点が保存されておらず、取り消しを求められました。続けますか?</translation>
</message>
25703,8 → 25703,8
</message>
<message>
<location filename="../../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../../scribus/scribus.cpp" line="1670"/>
<location filename="../../../scribus/scribus.cpp" line="1956"/>
<location filename="../../../scribus/scribus.cpp" line="1673"/>
<location filename="../../../scribus/scribus.cpp" line="1959"/>
<source>Document Template: </source>
<translation>ドキュメントテンプレート:</translation>
</message>
26179,12 → 26179,17
<translation>引数に数値以外の値が含まれています: 浮動少数の値のリストでなければなりません</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</source>
<comment>python error</comment>
<translation>線幅が範囲を越えています。0&lt;=線幅&lt;=12でなければなりません。</translation>
<translation type="obsolete">線幅が範囲を越えています。0&lt;=線幅&lt;=12でなければなりません。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 300.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="266"/>
<source>Line shade out of bounds, must be 0 &lt;= shade &lt;= 100.</source>
<comment>python error</comment>
26673,8 → 26678,8
<translation>ルクセンブルグ語</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="63"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="80"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="69"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="86"/>
<source>Font %1(%2) is broken</source>
<translation>フォント %1(%2) は壊れています</translation>
</message>
26940,7 → 26945,7
<translation>%1 はおそらく破損しています : 不明な解像度タグ</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="177"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="183"/>
<source>Font %1 has broken glyph %2</source>
<translation>フォント %1 に壊れたグリフ %2 が含まれています</translation>
</message>
26970,7 → 26975,7
<translation>テキストフレーム以外では行数を取得できません。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="614"/>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<source>You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation type="unfinished"></translation>
</message>
29475,47 → 29480,47
<translation>スクラップブックを読み込み中</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>Fatal Error</source>
<translation>致命的なエラー</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="629"/>
<location filename="../../../scribus/scribus.cpp" line="628"/>
<source>Open &amp;Recent</source>
<translation>最近のファイルを開く(&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="637"/>
<location filename="../../../scribus/scribus.cpp" line="636"/>
<source>&amp;Import</source>
<translation>インポート(&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="644"/>
<location filename="../../../scribus/scribus.cpp" line="643"/>
<source>&amp;Export</source>
<translation>エクスポート(&amp;E)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="746"/>
<location filename="../../../scribus/scribus.cpp" line="745"/>
<source>Preview Settings</source>
<translation>プレビュー設定</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="729"/>
<location filename="../../../scribus/scribus.cpp" line="728"/>
<source>Level</source>
<translation>レベル</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="735"/>
<location filename="../../../scribus/scribus.cpp" line="734"/>
<source>Send to La&amp;yer</source>
<translation>レイヤーに送る(&amp;Y)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="754"/>
<location filename="../../../scribus/scribus.cpp" line="753"/>
<source>&amp;PDF Options</source>
<translation>PDFオプション(&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="760"/>
<location filename="../../../scribus/scribus.cpp" line="759"/>
<source>C&amp;onvert To</source>
<translation>変換(&amp;O)</translation>
</message>
29536,74 → 29541,74
<translation type="obsolete">配置(&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1694"/>
<location filename="../../../scribus/scribus.cpp" line="1734"/>
<location filename="../../../scribus/scribus.cpp" line="3873"/>
<location filename="../../../scribus/scribus.cpp" line="4268"/>
<location filename="../../../scribus/scribus.cpp" line="4482"/>
<location filename="../../../scribus/scribus.cpp" line="4621"/>
<location filename="../../../scribus/scribus.cpp" line="9390"/>
<location filename="../../../scribus/scribus.cpp" line="1697"/>
<location filename="../../../scribus/scribus.cpp" line="1737"/>
<location filename="../../../scribus/scribus.cpp" line="3876"/>
<location filename="../../../scribus/scribus.cpp" line="4271"/>
<location filename="../../../scribus/scribus.cpp" line="4485"/>
<location filename="../../../scribus/scribus.cpp" line="4624"/>
<location filename="../../../scribus/scribus.cpp" line="9397"/>
<source>Ready</source>
<translation>準備完了</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3268"/>
<location filename="../../../scribus/scribus.cpp" line="3376"/>
<location filename="../../../scribus/scribus.cpp" line="3964"/>
<location filename="../../../scribus/scribus.cpp" line="3271"/>
<location filename="../../../scribus/scribus.cpp" line="3379"/>
<location filename="../../../scribus/scribus.cpp" line="3967"/>
<source>Open</source>
<translation>開く</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3391"/>
<location filename="../../../scribus/scribus.cpp" line="3394"/>
<source>Importing Pages...</source>
<translation>ページをインポート中...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3420"/>
<location filename="../../../scribus/scribus.cpp" line="3423"/>
<source>Import Page(s)</source>
<translation>ページをインポート</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3462"/>
<location filename="../../../scribus/scribus.cpp" line="3465"/>
<source>Import done</source>
<translation>インポート完了</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3466"/>
<location filename="../../../scribus/scribus.cpp" line="3469"/>
<source>Found nothing to import</source>
<translation>インポートするものが見つかりません</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>File %1 is not in an acceptable format</source>
<translation>ファイル %1 は受け入れ可能なフォーマットではありません</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3620"/>
<location filename="../../../scribus/scribus.cpp" line="3623"/>
<source>Loading...</source>
<translation>読み込み中...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<location filename="../../../scribus/scribus.cpp" line="3771"/>
<source> was replaced by: </source>
<translation> は以下で置換されます: </translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3800"/>
<location filename="../../../scribus/scribus.cpp" line="3803"/>
<source>(converted)</source>
<translation>(変換済み)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3239"/>
<location filename="../../../scribus/scribus.cpp" line="3242"/>
<source>All Supported Formats</source>
<translation>サポートされている全てのフォーマット</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4202"/>
<location filename="../../../scribus/scribus.cpp" line="4263"/>
<location filename="../../../scribus/scribus.cpp" line="7971"/>
<location filename="../../../scribus/scribus.cpp" line="8105"/>
<location filename="../../../scribus/scribus.cpp" line="8127"/>
<location filename="../../../scribus/scribus.cpp" line="4205"/>
<location filename="../../../scribus/scribus.cpp" line="4266"/>
<location filename="../../../scribus/scribus.cpp" line="7978"/>
<location filename="../../../scribus/scribus.cpp" line="8112"/>
<location filename="../../../scribus/scribus.cpp" line="8134"/>
<source>Cannot write the file:
%1</source>
<translation>ファイルを書き込めません:
29610,119 → 29615,119
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4248"/>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="4251"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>Save As</source>
<translation>名前を付けて保存</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4277"/>
<location filename="../../../scribus/scribus.cpp" line="4280"/>
<source>Saving...</source>
<translation>保存中...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4533"/>
<location filename="../../../scribus/scribus.cpp" line="7824"/>
<location filename="../../../scribus/scribus.cpp" line="4536"/>
<location filename="../../../scribus/scribus.cpp" line="7831"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Scribusはいくつかのエラーを検知しました。修正するにはプリフライト検証の利用を考えてください。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4566"/>
<location filename="../../../scribus/scribus.cpp" line="4569"/>
<source>Printing...</source>
<translation>印刷中...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1839"/>
<location filename="../../../scribus/scribus.cpp" line="4570"/>
<location filename="../../../scribus/scribus.cpp" line="7939"/>
<location filename="../../../scribus/scribus.cpp" line="1842"/>
<location filename="../../../scribus/scribus.cpp" line="4573"/>
<location filename="../../../scribus/scribus.cpp" line="7946"/>
<source>Document</source>
<translation>ドキュメント</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2490"/>
<location filename="../../../scribus/scribus.cpp" line="2493"/>
<source>1 Object selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2492"/>
<location filename="../../../scribus/scribus.cpp" line="2495"/>
<source>%1 Objects selected</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3554"/>
<location filename="../../../scribus/scribus.cpp" line="3557"/>
<source>File does not exist on the specified path :
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>Filename and Path for Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>All Files (*)</source>
<translation type="unfinished">全てのファイル (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4607"/>
<location filename="../../../scribus/scribus.cpp" line="4610"/>
<source>Printing failed!</source>
<translation>印刷に失敗しました!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>Cannot Cut In-Use Item</source>
<translation>使用中のアイテムは切り取りできません</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>アイテム %1 は、現在ストーリエディタで編集されています。切り取りはキャンセルされました。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5274"/>
<location filename="../../../scribus/scribus.cpp" line="5281"/>
<source>About Qt</source>
<translation>Qtについて</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5285"/>
<location filename="../../../scribus/scribus.cpp" line="5292"/>
<source>Scribus Manual</source>
<translation>Scribusマニュアル</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<source>Text Files (*.txt);;All Files(*)</source>
<translation>テキストファイル (*.txt);;全てのファイル(*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>&amp;Size:</source>
<translation>サイズ(&amp;S):</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>Size</source>
<translation>サイズ</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>&amp;Shade:</source>
<translation>色の濃さ(&amp;S):</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>Shade</source>
<translation>色の濃さ</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6893"/>
<location filename="../../../scribus/scribus.cpp" line="6900"/>
<source>No Style</source>
<translation>スタイルなし</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7432"/>
<location filename="../../../scribus/scribus.cpp" line="7565"/>
<location filename="../../../scribus/scribus.cpp" line="7439"/>
<location filename="../../../scribus/scribus.cpp" line="7572"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation type="unfinished"></translation>
29740,12 → 29745,12
<translation type="obsolete">Ghostscript : EPS画像やPostScript印刷プレビューは使用できません</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7860"/>
<location filename="../../../scribus/scribus.cpp" line="7867"/>
<source>All</source>
<translation>全て</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7908"/>
<location filename="../../../scribus/scribus.cpp" line="7915"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation>エラーを検知しました。
29752,7 → 29757,7
これらを訂正するためにプリフライト検証を使用することを考えてください。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8005"/>
<location filename="../../../scribus/scribus.cpp" line="8012"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation>エラーを検知しました。
29759,67 → 29764,67
これらを訂正するためにプリフライト検証を使用することを考えてください。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8101"/>
<location filename="../../../scribus/scribus.cpp" line="8108"/>
<source>-Page%1</source>
<translation> ページ%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8511"/>
<location filename="../../../scribus/scribus.cpp" line="8518"/>
<source>Some objects are locked.</source>
<translation>オブジェクトがロックされています</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8507"/>
<location filename="../../../scribus/scribus.cpp" line="8514"/>
<source>&amp;Lock All</source>
<translation>全てロック(&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7710"/>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<source>Ghostscript is not installed on your system, or Scribus is not configured with the path to the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7713"/>
<location filename="../../../scribus/scribus.cpp" line="7720"/>
<source>Until this is remedied, you cannot import EPS images or use Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7715"/>
<location filename="../../../scribus/scribus.cpp" line="7722"/>
<source>Until this is remedied, you cannot import EPS images or use PostScript Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<location filename="../../../scribus/scribus.cpp" line="7724"/>
<source>Please read our &lt;a href=&quot;http://wiki.scribus.net/index.php/Ghostscript&quot;&gt;help and installation instructions&lt;/a&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7721"/>
<location filename="../../../scribus/scribus.cpp" line="7728"/>
<source>Ghostscript is missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8142"/>
<location filename="../../../scribus/scribus.cpp" line="8149"/>
<source>Locate your PDF viewer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8508"/>
<location filename="../../../scribus/scribus.cpp" line="8515"/>
<source>&amp;Unlock All</source>
<translation>全てロック解除(&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>Information</source>
<translation>情報</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>The program %1 is already running!</source>
<translation>プログラム %1 はすでに実行しています!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9271"/>
<location filename="../../../scribus/scribus.cpp" line="9278"/>
<source>The program %1 is missing!</source>
<translation>プログラム %1 が見つかりません!</translation>
</message>
29848,75 → 29853,75
<translation type="obsolete">プレビュー設定(&amp;W)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9386"/>
<location filename="../../../scribus/scribus.cpp" line="1009"/>
<location filename="../../../scribus/scribus.cpp" line="9393"/>
<source>X-Pos:</source>
<translation>位置X:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1011"/>
<location filename="../../../scribus/scribus.cpp" line="9387"/>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9394"/>
<source>Y-Pos:</source>
<translation>位置Y:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="671"/>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<source>Contents</source>
<translation>目次</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="798"/>
<location filename="../../../scribus/scribus.cpp" line="797"/>
<source>&amp;Character</source>
<translation>文字(&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="816"/>
<location filename="../../../scribus/scribus.cpp" line="815"/>
<source>&amp;Quote</source>
<translation>引用符(&amp;Q)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="841"/>
<location filename="../../../scribus/scribus.cpp" line="840"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>スペースと改行(&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="855"/>
<location filename="../../../scribus/scribus.cpp" line="854"/>
<source>Liga&amp;ture</source>
<translation>リガチャ(&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4044"/>
<location filename="../../../scribus/scribus.cpp" line="9608"/>
<location filename="../../../scribus/scribus.cpp" line="4047"/>
<location filename="../../../scribus/scribus.cpp" line="9615"/>
<source>Do you really want to replace your existing image?</source>
<translation>本当に既存の画像を置き換えますか?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<location filename="../../../scribus/scribus.cpp" line="669"/>
<source>Paste Recent</source>
<translation>最近の貼り付け</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4246"/>
<location filename="../../../scribus/scribus.cpp" line="4249"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>ドキュメント (*.sla *.sla.gz);;全てのファイル (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3992"/>
<location filename="../../../scribus/scribus.cpp" line="3995"/>
<source>Do you really want to clear all your text?</source>
<translation>本当に全てのテキストを消去しますか?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="955"/>
<location filename="../../../scribus/scribus.cpp" line="954"/>
<source>Online &amp;Tutorials</source>
<translation>オンラインチュートリアル(&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3765"/>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>このドキュメントで使用されているいくつかのカラープロファイルはインストールされていません:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>%1;;All Files (*)</source>
<translation>%1;;全てのファイル (*)</translation>
</message>
29926,35 → 29931,35
<translation>ユーザショートカットを適用しています</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7589"/>
<location filename="../../../scribus/scribus.cpp" line="7666"/>
<location filename="../../../scribus/scribus.cpp" line="7596"/>
<location filename="../../../scribus/scribus.cpp" line="7673"/>
<source>Updating Images</source>
<translation>画像をアップデート</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4200"/>
<location filename="../../../scribus/scribus.cpp" line="4261"/>
<location filename="../../../scribus/scribus.cpp" line="4203"/>
<location filename="../../../scribus/scribus.cpp" line="4264"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>ドキュメントは一時ファイルに保存されていて移動できません: %1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4662"/>
<location filename="../../../scribus/scribus.cpp" line="4665"/>
<source>Print engine initialization failed</source>
<translation>プリントエンジンの初期化に失敗しました。</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>&amp;Name:</source>
<translation>名前(&amp;N):</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>New Entry</source>
<translation>新規エントリ</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7770"/>
<location filename="../../../scribus/scribus.cpp" line="7777"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation>Ghostscriptが見つかりません : Postscriptプリントプレビューが利用できません。</translation>
</message>
29964,12 → 29969,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3582"/>
<location filename="../../../scribus/scribus.cpp" line="3585"/>
<source>Document is already opened</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3583"/>
<location filename="../../../scribus/scribus.cpp" line="3586"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation type="unfinished"></translation>
</message>
34562,12 → 34567,16
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="54"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="48"/>
<source>The minimum number is 1; the maximum is 100.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The minimum number is 1; the maximum us 100.</source>
<translation>最小の数は1で、最大の数は100です。</translation>
<translation type="obsolete">最小の数は1で、最大の数は100です。</translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="57"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="51"/>
<source>Number of Copied Items to Keep in Scrapbook:</source>
<translation>スクラップブック中のコピーされたアイテム数:</translation>
</message>