Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 15293 → Rev 15294

/trunk/Scribus/resources/translations/po/scribus.nl.ts
1596,7 → 1596,7
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
Returns a tuple with document page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished"></translation>
1603,7 → 1603,7
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
<source>getPageNSize() -&gt; tuple
<source>getPageNSize(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
1612,8 → 1612,17
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
<source>getPageNMargins() -&gt; tuple
<source>getPageMargins()
 
Returns the document page margins as a (top, left, right, bottom) tuple in the document&apos;s current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<source>getPageNMargins(nr) -&gt; tuple
 
Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
1620,7 → 1629,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="200"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
1631,15 → 1640,6
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
2640,12 → 2640,12
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="233"/>
<location filename="../../../scribus/ui/about.cpp" line="650"/>
<location filename="../../../scribus/ui/about.cpp" line="654"/>
<source>Check for Updates</source>
<translation>Controleer op updates</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="648"/>
<location filename="../../../scribus/ui/about.cpp" line="652"/>
<source>Abort Update Check</source>
<translation>Annuleer update controle</translation>
</message>
2675,9 → 2675,9
<translation>Websitebeheerders:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="448"/>
<location filename="../../../scribus/ui/about.cpp" line="560"/>
<location filename="../../../scribus/ui/about.cpp" line="626"/>
<location filename="../../../scribus/ui/about.cpp" line="449"/>
<location filename="../../../scribus/ui/about.cpp" line="563"/>
<location filename="../../../scribus/ui/about.cpp" line="630"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Openen van bestand %1 mislukt. Controleer alstublieft uw installatiemap of de Scribus website voor %1 meer information.</translation>
</message>
4403,12 → 4403,12
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="475"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="474"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="483"/>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="482"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
12434,9 → 12434,8
<translation>Vergrendel of ontgrendel laag - Uitgeschakeld is ontgrendeld </translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation>Tekst loopt om object in onderliggende lagen - Inschakelen zorgt voor tekstomloop rond andere objecten, zelfs in onderliggende lagen</translation>
<translation type="obsolete">Tekst loopt om object in onderliggende lagen - Inschakelen zorgt voor tekstomloop rond andere objecten, zelfs in onderliggende lagen</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="609"/>
12474,6 → 12473,11
<translation>Laag naar beneden</translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="608"/>
<source>Make text in lower layers flow around objects - Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/layers.cpp" line="610"/>
<source>Name of the Layer - Double click on the name of a layer to edit the name</source>
<translation>Naam van de laag - Klik dubbel op de naam van deze laag te bewerken</translation>
14606,42 → 14610,42
<translation type="unfinished">Exporteer items op huidige pagina:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="184"/>
<location filename="../../../scribus/pdflib_core.cpp" line="187"/>
<source>Qt build miss both &quot;UTF-16&quot; and &quot;ISO-10646-UCS-2&quot; text codecs, pdf export is not possible</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2843"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2847"/>
<source>Page:</source>
<translation type="unfinished">Pagina:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="2856"/>
<location filename="../../../scribus/pdflib_core.cpp" line="2860"/>
<source>Date:</source>
<translation type="unfinished">Datum:</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10342"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10346"/>
<source>Failed to load an image : %1</source>
<translation type="unfinished">Afbeelding : %1 kon niet worden geladen</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to write an image : %1</source>
<translation type="unfinished">Afbeelding : %1 kon niet worden overschreven</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10352"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10356"/>
<source>Failed to load an image mask : %1</source>
<translation type="unfinished">Afbeeldingknippad : %1 kon niet worden geladen</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10357"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10361"/>
<source>Insufficient memory for processing an image</source>
<translation type="unfinished">Onvoldoende geheugen beschikbaar om de afbeelding te verwerken</translation>
</message>
<message>
<location filename="../../../scribus/pdflib_core.cpp" line="10337"/>
<location filename="../../../scribus/pdflib_core.cpp" line="10341"/>
<source>A write error occurred, please check available disk space</source>
<translation type="unfinished">Er deed zich een schrijffout voor, controleer de beschikbare schijfruimte</translation>
</message>
21786,7 → 21790,7
</message>
<message>
<location filename="../../../scribus/ui/prefs_scrapbook.cpp" line="28"/>
<source>The minimum number is 1; the maximum us 100</source>
<source>The minimum number is 1; the maximum is 100</source>
<translation type="unfinished"></translation>
</message>
</context>
25532,7 → 25536,7
<translation>Pagina</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<location filename="../../../scribus/scribus.cpp" line="612"/>
<source>Scribus Development Version</source>
<translation>Scribus ontwikkelings versie</translation>
</message>
25725,12 → 25729,17
<translation>argument bevat niet-nummerieke waarden: moet een lijst van zwevende waarden (float values) zijn.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 12.</source>
<comment>python error</comment>
<translation>Lijnbreedte buiten bereik, moet zijn 0 &lt;= line_width &lt;=12.</translation>
<translation type="obsolete">Lijnbreedte buiten bereik, moet zijn 0 &lt;= line_width &lt;=12.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="246"/>
<source>Line width out of bounds, must be 0 &lt;= line_width &lt;= 300.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.cpp" line="266"/>
<source>Line shade out of bounds, must be 0 &lt;= shade &lt;= 100.</source>
<comment>python error</comment>
25918,12 → 25927,12
<translation>in element &lt;lpiSettingsEntry&gt; ontbreekt &apos;name&apos; attribuut</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="48"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="54"/>
<source>Freetype2 library not available</source>
<translation>Freetype2 library niet beschikbaar</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="313"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="319"/>
<location filename="../../../scribus/fonts/scface_ttf.cpp" line="585"/>
<source>Font %1 is broken (read stream), no embedding</source>
<translation>Het font %1 is beschadigd (read stream), wordt niet ingesloten</translation>
25934,7 → 25943,7
<translation>Font %1 is beschadigd (no Face), wordt genegeerd</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="129"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="135"/>
<location filename="../../../scribus/scfonts.cpp" line="361"/>
<location filename="../../../scribus/scfonts.cpp" line="398"/>
<source>Font %1 has broken glyph %2 (charcode %3)</source>
26029,8 → 26038,8
</message>
<message>
<location filename="../../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../../scribus/scribus.cpp" line="1670"/>
<location filename="../../../scribus/scribus.cpp" line="1956"/>
<location filename="../../../scribus/scribus.cpp" line="1673"/>
<location filename="../../../scribus/scribus.cpp" line="1959"/>
<source>Document Template: </source>
<translation>Document Sjabloon:</translation>
</message>
26271,7 → 26280,7
<translation>Zoekt naar fonts</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4167"/>
<location filename="../../../scribus/scribus.cpp" line="4170"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>De veranderingen in het document zijn nog niet opgeslagen en u heeft gevraagd deze terug te zetten. Wilt u doorgaan?</translation>
</message>
26307,17 → 26316,17
<translation>Afdrukken bestand</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3421"/>
<location filename="../../../scribus/scribus.cpp" line="3424"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation>&lt;p&gt;U probeert meer pagina&apos;s te importeren dan er beschikbaar zijn in het huidige document geteld vanaf de actieve pagina.&lt;/p&gt;Maak een keuze:&lt;br&gt;&lt;ul&gt;&lt;li&gt;&lt;b&gt;Aanmaken&lt;/b&gt; ontbrekende pagina&apos;s&lt;/li&gt;&lt;li&gt;&lt;b&gt;Importeren&lt;/b&gt; Pagina&apos;s tot de laatste pagina&lt;/li&gt;&lt;li&gt;&lt;b&gt;Afbreken&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3425"/>
<location filename="../../../scribus/scribus.cpp" line="3428"/>
<source>C&amp;reate</source>
<translation>&amp;Aanmaken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3426"/>
<location filename="../../../scribus/scribus.cpp" line="3429"/>
<source>&amp;Import</source>
<translation>&amp;Importeren</translation>
</message>
26562,18 → 26571,18
<translation>E</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="614"/>
<location filename="../../../scribus/scribus.cpp" line="613"/>
<source>You are running a development version of Scribus 1.3.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.3.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation>U werkt met een ontwikkelversie van Scribus 1.3.x. Het document waarin u werkt is oorspronkelijk opgezet in Scribus 1.2.x Opslaan van dit bestand maakt het onbruikbaar voor Scribus 1.2.x versies. Om toch in 1.2.x te bewerken, bewaar dit bestand onder een andere naam bewerk het onder deze nieuwe naam en het originele bestand zal niet worden gewijzigd. Weet u zeker dat u wilt doorgaan?</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="63"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="80"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="69"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="86"/>
<source>Font %1(%2) is broken</source>
<translation>Font %1 (%2) is beschadigd</translation>
</message>
<message>
<location filename="../../../scribus/fonts/ftface.cpp" line="177"/>
<location filename="../../../scribus/fonts/ftface.cpp" line="183"/>
<source>Font %1 has broken glyph %2</source>
<translation>Font %1 heeft beschadigde symboolteken %2</translation>
</message>
29027,100 → 29036,100
<translation>Kladblok inlezen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>Fatal Error</source>
<translation>Kritieke fout</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="629"/>
<location filename="../../../scribus/scribus.cpp" line="628"/>
<source>Open &amp;Recent</source>
<translation>&amp;Recent geopend</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="637"/>
<location filename="../../../scribus/scribus.cpp" line="636"/>
<source>&amp;Import</source>
<translation>&amp;Importeren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="644"/>
<location filename="../../../scribus/scribus.cpp" line="643"/>
<source>&amp;Export</source>
<translation>&amp;Exporteren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="746"/>
<location filename="../../../scribus/scribus.cpp" line="745"/>
<source>Preview Settings</source>
<translation>Voorbeeld instellingen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="729"/>
<location filename="../../../scribus/scribus.cpp" line="728"/>
<source>Level</source>
<translation>Niveau</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="735"/>
<location filename="../../../scribus/scribus.cpp" line="734"/>
<source>Send to La&amp;yer</source>
<translation>In &amp;laag zetten</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="754"/>
<location filename="../../../scribus/scribus.cpp" line="753"/>
<source>&amp;PDF Options</source>
<translation>&amp;PDF-opties</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="760"/>
<location filename="../../../scribus/scribus.cpp" line="759"/>
<source>C&amp;onvert To</source>
<translation>&amp;Omzetten naar</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1694"/>
<location filename="../../../scribus/scribus.cpp" line="1734"/>
<location filename="../../../scribus/scribus.cpp" line="3873"/>
<location filename="../../../scribus/scribus.cpp" line="4268"/>
<location filename="../../../scribus/scribus.cpp" line="4482"/>
<location filename="../../../scribus/scribus.cpp" line="4621"/>
<location filename="../../../scribus/scribus.cpp" line="9390"/>
<location filename="../../../scribus/scribus.cpp" line="1697"/>
<location filename="../../../scribus/scribus.cpp" line="1737"/>
<location filename="../../../scribus/scribus.cpp" line="3876"/>
<location filename="../../../scribus/scribus.cpp" line="4271"/>
<location filename="../../../scribus/scribus.cpp" line="4485"/>
<location filename="../../../scribus/scribus.cpp" line="4624"/>
<location filename="../../../scribus/scribus.cpp" line="9397"/>
<source>Ready</source>
<translation>Gereed</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2490"/>
<location filename="../../../scribus/scribus.cpp" line="2493"/>
<source>1 Object selected</source>
<translation>1 Object geselecteerd</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="2492"/>
<location filename="../../../scribus/scribus.cpp" line="2495"/>
<source>%1 Objects selected</source>
<translation>%1 Objecten geselecteerd</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3268"/>
<location filename="../../../scribus/scribus.cpp" line="3376"/>
<location filename="../../../scribus/scribus.cpp" line="3964"/>
<location filename="../../../scribus/scribus.cpp" line="3271"/>
<location filename="../../../scribus/scribus.cpp" line="3379"/>
<location filename="../../../scribus/scribus.cpp" line="3967"/>
<source>Open</source>
<translation>Openen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3391"/>
<location filename="../../../scribus/scribus.cpp" line="3394"/>
<source>Importing Pages...</source>
<translation>Pagina&apos;s worden geïmporteerd...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3420"/>
<location filename="../../../scribus/scribus.cpp" line="3423"/>
<source>Import Page(s)</source>
<translation>Pagina(&apos;s) importeren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3462"/>
<location filename="../../../scribus/scribus.cpp" line="3465"/>
<source>Import done</source>
<translation>Importeren voltooid</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3466"/>
<location filename="../../../scribus/scribus.cpp" line="3469"/>
<source>Found nothing to import</source>
<translation>Niets gevonden om te importeren</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3554"/>
<location filename="../../../scribus/scribus.cpp" line="3557"/>
<source>File does not exist on the specified path :
%1</source>
<translation>Bestand bestaat niet op het gespecificeerde pad:
29127,41 → 29136,41
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3599"/>
<location filename="../../../scribus/scribus.cpp" line="3602"/>
<source>File %1 is not in an acceptable format</source>
<translation>Bestand %1 is een niet door Scribus geaccepteerd bestandsformaat.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3620"/>
<location filename="../../../scribus/scribus.cpp" line="3623"/>
<source>Loading...</source>
<translation>Laden...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<location filename="../../../scribus/scribus.cpp" line="3771"/>
<source> was replaced by: </source>
<translation> vervangen door: </translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3800"/>
<location filename="../../../scribus/scribus.cpp" line="3803"/>
<source>(converted)</source>
<translation>(omgezet)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>Filename and Path for Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4106"/>
<location filename="../../../scribus/scribus.cpp" line="4109"/>
<source>All Files (*)</source>
<translation type="unfinished">Alle bestanden (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4202"/>
<location filename="../../../scribus/scribus.cpp" line="4263"/>
<location filename="../../../scribus/scribus.cpp" line="7971"/>
<location filename="../../../scribus/scribus.cpp" line="8105"/>
<location filename="../../../scribus/scribus.cpp" line="8127"/>
<location filename="../../../scribus/scribus.cpp" line="4205"/>
<location filename="../../../scribus/scribus.cpp" line="4266"/>
<location filename="../../../scribus/scribus.cpp" line="7978"/>
<location filename="../../../scribus/scribus.cpp" line="8112"/>
<location filename="../../../scribus/scribus.cpp" line="8134"/>
<source>Cannot write the file:
%1</source>
<translation>Kan het bestand niet schrijven:
29168,93 → 29177,93
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4248"/>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="4251"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>Save As</source>
<translation>Opslaan als</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4277"/>
<location filename="../../../scribus/scribus.cpp" line="4280"/>
<source>Saving...</source>
<translation>Opslaan...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4533"/>
<location filename="../../../scribus/scribus.cpp" line="7824"/>
<location filename="../../../scribus/scribus.cpp" line="4536"/>
<location filename="../../../scribus/scribus.cpp" line="7831"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Fouten geconstateerd. Gebruik Preflight Controle om te herstellen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4566"/>
<location filename="../../../scribus/scribus.cpp" line="4569"/>
<source>Printing...</source>
<translation>Afdrukken...</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1839"/>
<location filename="../../../scribus/scribus.cpp" line="4570"/>
<location filename="../../../scribus/scribus.cpp" line="7939"/>
<location filename="../../../scribus/scribus.cpp" line="1842"/>
<location filename="../../../scribus/scribus.cpp" line="4573"/>
<location filename="../../../scribus/scribus.cpp" line="7946"/>
<source>Document</source>
<translation>Document</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4607"/>
<location filename="../../../scribus/scribus.cpp" line="4610"/>
<source>Printing failed!</source>
<translation>Afdrukken mislukt!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>Cannot Cut In-Use Item</source>
<translation>Kan item in gebruik niet knippen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4698"/>
<location filename="../../../scribus/scribus.cpp" line="4705"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>Dit item %1 wordt momenteel bijgewerkt met de Story Editor. Knippen wordt geannuleerd</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5274"/>
<location filename="../../../scribus/scribus.cpp" line="5281"/>
<source>About Qt</source>
<translation>Over Qt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5285"/>
<location filename="../../../scribus/scribus.cpp" line="5292"/>
<source>Scribus Manual</source>
<translation>Scribus handboek</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="5315"/>
<location filename="../../../scribus/scribus.cpp" line="5322"/>
<source>Text Files (*.txt);;All Files(*)</source>
<translation>Tekstbestanden (*.txt);;Alle bestanden (*)</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>&amp;Size:</source>
<translation>&amp;Grootte:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6759"/>
<location filename="../../../scribus/scribus.cpp" line="6766"/>
<source>Size</source>
<translation>Grootte</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>&amp;Shade:</source>
<translation>&amp;Tint:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6789"/>
<location filename="../../../scribus/scribus.cpp" line="6796"/>
<source>Shade</source>
<translation>Tint</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="6893"/>
<location filename="../../../scribus/scribus.cpp" line="6900"/>
<source>No Style</source>
<translation>Geen stijl</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7432"/>
<location filename="../../../scribus/scribus.cpp" line="7565"/>
<location filename="../../../scribus/scribus.cpp" line="7439"/>
<location filename="../../../scribus/scribus.cpp" line="7572"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation type="unfinished"></translation>
29268,12 → 29277,12
<translation type="obsolete">Ghostscript: EPS afbeeldingen of Print Preview kan niet worden gebruikt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7860"/>
<location filename="../../../scribus/scribus.cpp" line="7867"/>
<source>All</source>
<translation>Alles</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7908"/>
<location filename="../../../scribus/scribus.cpp" line="7915"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation>Fouten geconstateerd.
29280,7 → 29289,7
Gebruik Preflight Controle om te herstellen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8005"/>
<location filename="../../../scribus/scribus.cpp" line="8012"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation>Fouten geconstateerd.
29287,79 → 29296,79
Gebruik Preflight Controle om te herstellen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8101"/>
<location filename="../../../scribus/scribus.cpp" line="8108"/>
<source>-Page%1</source>
<translation>-Pagina%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8511"/>
<location filename="../../../scribus/scribus.cpp" line="8518"/>
<source>Some objects are locked.</source>
<translation>Sommige objecten zijn vergrendeld.</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8507"/>
<location filename="../../../scribus/scribus.cpp" line="8514"/>
<source>&amp;Lock All</source>
<translation>&amp;Alles vergrendelen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7710"/>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<source>Ghostscript is not installed on your system, or Scribus is not configured with the path to the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7713"/>
<location filename="../../../scribus/scribus.cpp" line="7720"/>
<source>Until this is remedied, you cannot import EPS images or use Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7715"/>
<location filename="../../../scribus/scribus.cpp" line="7722"/>
<source>Until this is remedied, you cannot import EPS images or use PostScript Print Preview. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7717"/>
<location filename="../../../scribus/scribus.cpp" line="7724"/>
<source>Please read our &lt;a href=&quot;http://wiki.scribus.net/index.php/Ghostscript&quot;&gt;help and installation instructions&lt;/a&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7721"/>
<location filename="../../../scribus/scribus.cpp" line="7728"/>
<source>Ghostscript is missing</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8142"/>
<location filename="../../../scribus/scribus.cpp" line="8149"/>
<source>Locate your PDF viewer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="8508"/>
<location filename="../../../scribus/scribus.cpp" line="8515"/>
<source>&amp;Unlock All</source>
<translation>&amp;Alle losmaken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>Information</source>
<translation>Informatie</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9232"/>
<location filename="../../../scribus/scribus.cpp" line="9239"/>
<source>The program %1 is already running!</source>
<translation>Het programma %1 is al actief!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9271"/>
<location filename="../../../scribus/scribus.cpp" line="9278"/>
<source>The program %1 is missing!</source>
<translation>Het programma %1 ontbreekt!</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9386"/>
<location filename="../../../scribus/scribus.cpp" line="1009"/>
<location filename="../../../scribus/scribus.cpp" line="9393"/>
<source>X-Pos:</source>
<translation>X-positie:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="1011"/>
<location filename="../../../scribus/scribus.cpp" line="9387"/>
<location filename="../../../scribus/scribus.cpp" line="1010"/>
<location filename="../../../scribus/scribus.cpp" line="9394"/>
<source>Y-Pos:</source>
<translation>Y-positie:</translation>
</message>
29368,48 → 29377,48
<translation type="obsolete">Ghostscript: EPS afbeeldingen of Print Preview kan niet worden gebruikt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4044"/>
<location filename="../../../scribus/scribus.cpp" line="9608"/>
<location filename="../../../scribus/scribus.cpp" line="4047"/>
<location filename="../../../scribus/scribus.cpp" line="9615"/>
<source>Do you really want to replace your existing image?</source>
<translation>Wilt u deze afbeelding werkelijk vervangen?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="671"/>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<source>Contents</source>
<translation>Inhoud</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="855"/>
<location filename="../../../scribus/scribus.cpp" line="854"/>
<source>Liga&amp;ture</source>
<translation>Liga&amp;tuur</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="670"/>
<location filename="../../../scribus/scribus.cpp" line="669"/>
<source>Paste Recent</source>
<translation>Recente plakken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="798"/>
<location filename="../../../scribus/scribus.cpp" line="797"/>
<source>&amp;Character</source>
<translation>&amp;Teken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="816"/>
<location filename="../../../scribus/scribus.cpp" line="815"/>
<source>&amp;Quote</source>
<translation>&amp;Aanhalingsteken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="841"/>
<location filename="../../../scribus/scribus.cpp" line="840"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>S&amp;paties &amp;&amp; afbrekingen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3992"/>
<location filename="../../../scribus/scribus.cpp" line="3995"/>
<source>Do you really want to clear all your text?</source>
<translation>Wilt u werkelijk uw tekst verwijderen?</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4246"/>
<location filename="../../../scribus/scribus.cpp" line="4249"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Documenten (*.sla *.sla.gz);;Alle bestanden (*)</translation>
</message>
29419,17 → 29428,17
<translation>Scribus </translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="955"/>
<location filename="../../../scribus/scribus.cpp" line="954"/>
<source>Online &amp;Tutorials</source>
<translation>&amp;Tutorials op internet</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3765"/>
<location filename="../../../scribus/scribus.cpp" line="3768"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Sommige kleurprofielen die in dit document worden gebruikt, zijn niet geïnstalleerd:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7962"/>
<location filename="../../../scribus/scribus.cpp" line="7969"/>
<source>%1;;All Files (*)</source>
<translation>%1;;Alle Bestanden (*)</translation>
</message>
29439,14 → 29448,14
<translation>Gebruikerskoppelingen toepassen</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7589"/>
<location filename="../../../scribus/scribus.cpp" line="7666"/>
<location filename="../../../scribus/scribus.cpp" line="7596"/>
<location filename="../../../scribus/scribus.cpp" line="7673"/>
<source>Updating Images</source>
<translation>Afbeelding Bijwerken</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4200"/>
<location filename="../../../scribus/scribus.cpp" line="4261"/>
<location filename="../../../scribus/scribus.cpp" line="4203"/>
<location filename="../../../scribus/scribus.cpp" line="4264"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>Uw document is niet opgeslagen in een tijdelijk bestand en kan niet worden verplaatst:
29453,37 → 29462,37
%1</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="4662"/>
<location filename="../../../scribus/scribus.cpp" line="4665"/>
<source>Print engine initialization failed</source>
<translation type="unfinished">Print plugin initialiseren mislukt</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3239"/>
<location filename="../../../scribus/scribus.cpp" line="3242"/>
<source>All Supported Formats</source>
<translation>Alle ondersteunde formaten</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>&amp;Name:</source>
<translation>&amp;Naam:</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="9665"/>
<location filename="../../../scribus/scribus.cpp" line="9672"/>
<source>New Entry</source>
<translation>Nieuwe ingang</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="7770"/>
<location filename="../../../scribus/scribus.cpp" line="7777"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation>Ghostscript ontbreekt: Postscript afdrukvoorbeeld is niet beschikbaar</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3582"/>
<location filename="../../../scribus/scribus.cpp" line="3585"/>
<source>Document is already opened</source>
<translation>Het document is al geopend</translation>
</message>
<message>
<location filename="../../../scribus/scribus.cpp" line="3583"/>
<location filename="../../../scribus/scribus.cpp" line="3586"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation>Dit document is al in gebruik. U zult worden verwezen naar het betreffende venster.</translation>
</message>
34046,12 → 34055,16
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="54"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="48"/>
<source>The minimum number is 1; the maximum is 100.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The minimum number is 1; the maximum us 100.</source>
<translation>Het minimum aantal is 1; het maximum is 100.</translation>
<translation type="obsolete">Het minimum aantal is 1; het maximum is 100.</translation>
</message>
<message>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="57"/>
<location filename="../../../scribus/ui/tabscrapbook.ui" line="51"/>
<source>Number of Copied Items to Keep in Scrapbook:</source>
<translation>Aantal gekopieerde items te bewaren in kladblok:</translation>
</message>