Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 24183 → Rev 24184

/trunk/Scribus/resources/translations/scribus.bn_IN.ts
11020,41 → 11020,41
<context>
<name>LayerPalette</name>
<message>
<location filename="../../scribus/ui/layers.cpp" line="698"/>
<location filename="../../scribus/ui/layers.cpp" line="699"/>
<source>Layers</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="352"/>
<location filename="../../scribus/ui/layers.cpp" line="737"/>
<location filename="../../scribus/ui/layers.cpp" line="353"/>
<location filename="../../scribus/ui/layers.cpp" line="736"/>
<source>Delete Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="82"/>
<location filename="../../scribus/ui/layers.cpp" line="727"/>
<location filename="../../scribus/ui/layers.cpp" line="83"/>
<location filename="../../scribus/ui/layers.cpp" line="726"/>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="353"/>
<location filename="../../scribus/ui/layers.cpp" line="354"/>
<source>Do you want to delete all objects on this layer too?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="61"/>
<location filename="../../scribus/ui/layers.cpp" line="725"/>
<location filename="../../scribus/ui/layers.cpp" line="62"/>
<location filename="../../scribus/ui/layers.cpp" line="724"/>
<source>Opacity:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="68"/>
<location filename="../../scribus/ui/layers.cpp" line="726"/>
<location filename="../../scribus/ui/layers.cpp" line="69"/>
<location filename="../../scribus/ui/layers.cpp" line="725"/>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="699"/>
<location filename="../../scribus/ui/layers.cpp" line="700"/>
<source>Blend Mode:</source>
<translation type="unfinished"></translation>
</message>
11139,72 → 11139,72
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="740"/>
<location filename="../../scribus/ui/layers.cpp" line="739"/>
<source>Selects the Blendmode, works only in PDF 1.4</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="741"/>
<location filename="../../scribus/ui/layers.cpp" line="740"/>
<source>Layer Transparency, works only in PDF 1.4 and SVG</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="735"/>
<location filename="../../scribus/ui/layers.cpp" line="734"/>
<source>Add a New Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="736"/>
<location filename="../../scribus/ui/layers.cpp" line="735"/>
<source>Duplicate the Current Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="738"/>
<location filename="../../scribus/ui/layers.cpp" line="737"/>
<source>Raise Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="739"/>
<location filename="../../scribus/ui/layers.cpp" line="738"/>
<source>Lower Layer</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="742"/>
<location filename="../../scribus/ui/layers.cpp" line="741"/>
<source>Color of the Layer Indicator. Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="743"/>
<location filename="../../scribus/ui/layers.cpp" line="742"/>
<source>Make Layer Visible. Uncheck to hide the layer from the display.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="744"/>
<location filename="../../scribus/ui/layers.cpp" line="743"/>
<source>Print Layer. Uncheck to disable printing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="745"/>
<location filename="../../scribus/ui/layers.cpp" line="744"/>
<source>Lock or Unlock Layer. Unchecked is unlocked.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="746"/>
<location filename="../../scribus/ui/layers.cpp" line="745"/>
<source>Make text in lower layers flow around objects. Enabling this forces text in lower layers to flow around objects of the layer for which this option has been enabled.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="747"/>
<location filename="../../scribus/ui/layers.cpp" line="746"/>
<source>Outline Mode. Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="748"/>
<location filename="../../scribus/ui/layers.cpp" line="747"/>
<source>Select Objects on Layer. Check to enable selecting.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/layers.cpp" line="749"/>
<location filename="../../scribus/ui/layers.cpp" line="748"/>
<source>Name of the Layer. Double click on the name of a layer to edit the name.</source>
<translation type="unfinished"></translation>
</message>
14864,32 → 14864,32
<context>
<name>PageSelector</name>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="232"/>
<location filename="../../scribus/ui/pageselector.cpp" line="222"/>
<source>Go to the first page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="233"/>
<location filename="../../scribus/ui/pageselector.cpp" line="223"/>
<source>Go to the previous page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="234"/>
<location filename="../../scribus/ui/pageselector.cpp" line="224"/>
<source>Go to the next page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="235"/>
<location filename="../../scribus/ui/pageselector.cpp" line="225"/>
<source>Go to the last page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="236"/>
<location filename="../../scribus/ui/pageselector.cpp" line="226"/>
<source>Select the current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/ui/pageselector.cpp" line="237"/>
<location filename="../../scribus/ui/pageselector.cpp" line="227"/>
<source> of %1</source>
<comment>number of pages in document</comment>
<translation type="unfinished"></translation>
28618,13 → 28618,19
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.cpp" line="327"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.cpp" line="331"/>
<source>page number is invalid.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.cpp" line="428"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.cpp" line="342"/>
<source>layer name is invalid.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.cpp" line="429"/>
<source>Page item must be an ImageFrame</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
29226,7 → 29232,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/util.cpp" line="354"/>
<location filename="../../scribus/util.cpp" line="355"/>
<source>File exists</source>
<translation type="unfinished"></translation>
</message>
29354,6 → 29360,20
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="865"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="974"/>
<source>incorrect argument: must be a string or a list of strings</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="887"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="996"/>
<source>incorrect argument: must be a list of strings</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="691"/>
<source>Cannot set style on a non-text frame.</source>
<comment>python error</comment>
29491,7 → 29511,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="962"/>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="966"/>
<source>Scribus Python interface module
 
This module is the Python interface for Scribus. It provides functions
29634,7 → 29654,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/util.cpp" line="525"/>
<location filename="../../scribus/util.cpp" line="526"/>
<source>page</source>
<comment>page export</comment>
<translation type="unfinished"></translation>
29771,7 → 29791,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/util.cpp" line="355"/>
<location filename="../../scribus/util.cpp" line="356"/>
<source>A file named &apos;%1&apos; already exists.&lt;br/&gt;Do you want to replace it with the file you are saving?</source>
<translation type="unfinished"></translation>
</message>