Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 23285 → Rev 23286

/trunk/Scribus/resources/translations/scribus.en_AU.ts
746,11 → 746,6
<translation>&amp;Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1682"/>
<source>Text Properties</source>
<translation>Text Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1684"/>
<source>&amp;Scrapbook</source>
<translation>&amp;Scrapbook</translation>
1784,6 → 1779,11
<translation>Copy</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1682"/>
<source>Content Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1773"/>
<source>Cut</source>
<translation>Cut</translation>
4074,37 → 4074,37
<context>
<name>CanvasMode_Normal</name>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1783"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1780"/>
<source>All Supported Formats</source>
<translation>All Supported Formats</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1811"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1808"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="386"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="385"/>
<source>Go to Page %1</source>
<translation>Go to Page %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="388"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="387"/>
<source>Go to URL %1</source>
<translation>Go to URL %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="390"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="389"/>
<source>Go to Page %1 in File %2</source>
<translation>Go to Page %1 in File %2</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1511"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1508"/>
<source>Page %1 does not exist!</source>
<translation>Page %1 does not exist!</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1517"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1514"/>
<source>Link Target is Web URL.
URL: %1</source>
<translation>Link Target is Web URL.
4111,13 → 4111,13
URL: %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1518"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1523"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1515"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1520"/>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1522"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1519"/>
<source>Link Target is external File.
File: %1
Page: %2</source>
4126,7 → 4126,7
Page: %2</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="431"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="430"/>
<source>Overflow Characters: %1 (%2 White Spaces)
Click to link to existing text frame or auto-create new linked text frame</source>
<translation>Overflow Characters: %1 (%2 White Spaces)
4779,12 → 4779,12
<context>
<name>CollectForOutput</name>
<message>
<location filename="../../scribus/collect4output.cpp" line="71"/>
<location filename="../../scribus/collect4output.cpp" line="65"/>
<source>Choose a Directory</source>
<translation>Choose a Directory</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="101"/>
<location filename="../../scribus/collect4output.cpp" line="95"/>
<source>Cannot create directory:
%1</source>
<translation>Cannot create directory:
4791,12 → 4791,12
%1</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="115"/>
<location filename="../../scribus/collect4output.cpp" line="109"/>
<source>Collecting...</source>
<translation>Collecting...</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="119"/>
<location filename="../../scribus/collect4output.cpp" line="113"/>
<source>Cannot collect all files for output for file:
%1</source>
<translation>Cannot collect all files for output for file:
4803,7 → 4803,7
%1</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="133"/>
<location filename="../../scribus/collect4output.cpp" line="127"/>
<source>Cannot collect the file:
%1</source>
<translation>Cannot collect the file:
6042,12 → 6042,12
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="598"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="582"/>
<source>Paste File...</source>
<translation>Paste File...</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="632"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="616"/>
<source>Delete Page</source>
<translation>Delete Page</translation>
</message>
6129,12 → 6129,12
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="511"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="583"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="567"/>
<source>&amp;Paste Here</source>
<translation>&amp;Paste Here</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="591"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="575"/>
<source>Paste Recent</source>
<translation>Paste Recent</translation>
</message>
6881,44 → 6881,6
</message>
</context>
<context>
<name>DockWidget</name>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="32"/>
<source>XYZ</source>
<translation>XYZ</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="68"/>
<source>Position [X,Y]:</source>
<translation>Position [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="87"/>
<source>Rotation:</source>
<translation>Rotation:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="168"/>
<source>Scale [X,Y]:</source>
<translation>Scale [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="251"/>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="270"/>
<source>Autofit</source>
<translation>Autofit</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="315"/>
<source>DPI [X,Y]:</source>
<translation>DPI [X,Y]:</translation>
</message>
</context>
<context>
<name>DownloadsPalette</name>
<message>
<location filename="../../scribus/ui/downloadspalette.cpp" line="12"/>
7954,22 → 7916,22
<context>
<name>FontComboH</name>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="157"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="155"/>
<source>Family:</source>
<translation>Family:</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="158"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="156"/>
<source>Style:</source>
<translation>Style:</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="160"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="158"/>
<source>Font Family of Selected Text or Text Frame</source>
<translation>Font Family of Selected Text or Text Frame</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="161"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="159"/>
<source>Font Style of Selected Text or Text Frame</source>
<translation>Font Style of Selected Text or Text Frame</translation>
</message>
8244,63 → 8206,6
</message>
</context>
<context>
<name>Form</name>
<message>
<location filename="../../scribus/ui/xyz.ui" line="32"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="32"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="70"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="70"/>
<source>Position:</source>
<translation>Position:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="89"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="89"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="134"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="134"/>
<source>Y</source>
<translation>Y</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="169"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="169"/>
<source>Rotation:</source>
<translation>Rotation:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="231"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="231"/>
<source>Scale [X,Y]:</source>
<translation>Scale [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="314"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="314"/>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="333"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="333"/>
<source>Autofit</source>
<translation>Autofit</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="378"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="378"/>
<source>DPI [X,Y]:</source>
<translation>DPI [X,Y]:</translation>
</message>
</context>
<context>
<name>GradientEditor</name>
<message>
<location filename="../../scribus/ui/gradienteditor.cpp" line="183"/>
8755,76 → 8660,76
<context>
<name>HelpBrowser</name>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="306"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="313"/>
<source>Scribus Online Help</source>
<translation>Scribus Online Help</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="398"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="405"/>
<source>Find</source>
<translation>Find</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="398"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="405"/>
<source>Search Term:</source>
<translation>Search Term:</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="76"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="318"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="325"/>
<source>&amp;Delete</source>
<translation>&amp;Delete</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="46"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="312"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="319"/>
<source>&amp;Print...</source>
<translation>&amp;Print...</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="308"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="315"/>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="56"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="314"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="321"/>
<source>&amp;Find...</source>
<translation>&amp;Find...</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="315"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="322"/>
<source>Find &amp;Next</source>
<translation>Find &amp;Next</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="316"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="323"/>
<source>Find &amp;Previous</source>
<translation>Find &amp;Previous</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="309"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="316"/>
<source>&amp;Edit</source>
<translation>&amp;Edit</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="147"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="148"/>
<source>Navigation</source>
<translation>Navigation</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="317"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="324"/>
<source>&amp;Add Bookmark</source>
<translation>&amp;Add Bookmark</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="81"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="319"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="326"/>
<source>D&amp;elete All</source>
<translation>D&amp;elete All</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="310"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="317"/>
<source>&amp;Bookmarks</source>
<translation>&amp;Bookmarks</translation>
</message>
8855,12 → 8760,12
<translation>&amp;Add</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="313"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="320"/>
<source>&amp;Quit</source>
<translation>&amp;Quit</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="737"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="745"/>
<source>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</source>
<comment>HTML message for no documentation available to show</comment>
<translation>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</translation>
9678,7 → 9583,7
<translation>All Supported Formats</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdfplugin.cpp" line="215"/>
<location filename="../../scribus/plugins/import/pdf/importpdfplugin.cpp" line="191"/>
<source>The Import plugin cannot handle Postscript files</source>
<translation>The Import plugin cannot handle Postscript files</translation>
</message>
13797,7 → 13702,7
<translation>Date:</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to embed the PDF file : %1.
Please disable experimental PDF and PS embedding and try again.</source>
<translation>Failed to embed the PDF file : %1.
13804,27 → 13709,27
Please disable experimental PDF and PS embedding and try again.</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11529"/>
<location filename="../../scribus/pdflib_core.cpp" line="11533"/>
<source>Failed to load an image : %1</source>
<translation>Failed to load an image : %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11534"/>
<location filename="../../scribus/pdflib_core.cpp" line="11538"/>
<source>Failed to write an image : %1</source>
<translation>Failed to write an image : %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11539"/>
<location filename="../../scribus/pdflib_core.cpp" line="11543"/>
<source>Failed to load an image mask : %1</source>
<translation>Failed to load an image mask : %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11544"/>
<location filename="../../scribus/pdflib_core.cpp" line="11548"/>
<source>Insufficient memory for processing an image</source>
<translation>Insufficient memory for processing an image</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11524"/>
<location filename="../../scribus/pdflib_core.cpp" line="11528"/>
<source>A write error occurred, please check available disk space</source>
<translation>A write error occurred, please check available disk space</translation>
</message>
14081,8 → 13986,8
<translation></translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="7587"/>
<location filename="../../scribus/pageitem.cpp" line="7588"/>
<location filename="../../scribus/pageitem.cpp" line="7597"/>
<location filename="../../scribus/pageitem.cpp" line="7598"/>
<source>Copy of</source>
<translation>Copy of</translation>
</message>
14526,32 → 14431,32
<context>
<name>PageItem_TextFrame</name>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4987"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5000"/>
<source>Linked Text</source>
<translation>Linked Text</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4989"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5002"/>
<source>Text Frame</source>
<translation>Text Frame</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4993"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5006"/>
<source>Paragraphs: </source>
<translation>Paragraphs: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5001"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5014"/>
<source>Lines: </source>
<translation>Lines: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5007"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5020"/>
<source>Words: </source>
<translation>Words: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5015"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5028"/>
<source>Chars: </source>
<translation>Chars: </translation>
</message>
15492,27 → 15397,27
<context>
<name>PdfPlug</name>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="192"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="167"/>
<source>Importing: %1</source>
<translation>Importing: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="195"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="170"/>
<source>Analyzing File:</source>
<translation>Analysing File:</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="379"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="336"/>
<source>Generating Items</source>
<translation>Generating Items</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="415"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="372"/>
<source>Open PDF-File</source>
<translation>Open PDF-File</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="415"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="372"/>
<source>Password</source>
<translation>Password</translation>
</message>
22177,52 → 22082,47
<context>
<name>PropertiesPalette</name>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="856"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="813"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="858"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="815"/>
<source>X, Y, &amp;Z</source>
<translation>X, Y, &amp;Z</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="861"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="817"/>
<source>&amp;Shape</source>
<translation>&amp;Shape</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="859"/>
<source>&amp;Image</source>
<translation>&amp;Image</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="862"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="818"/>
<source>&amp;Line</source>
<translation>&amp;Line</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="863"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="819"/>
<source>&amp;Colors</source>
<translation>&amp;Colours</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="864"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="820"/>
<source>&amp;Group</source>
<translation>&amp;Group</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="865"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="821"/>
<source>&amp;Transparency</source>
<translation>&amp;Transparency</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="866"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="822"/>
<source>T&amp;able</source>
<translation>T&amp;able</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="860"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="816"/>
<source>Drop Shadow</source>
<translation>Drop Shadow</translation>
</message>
25500,7 → 25400,7
<translation>Initialising...</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1268"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1269"/>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="590"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="1078"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="1204"/>
25551,7 → 25451,7
<message>
<location filename="../../scribus/gtgettext.cpp" line="204"/>
<location filename="../../scribus/scgtplugin.cpp" line="85"/>
<location filename="../../scribus/util_formats.cpp" line="325"/>
<location filename="../../scribus/util_formats.cpp" line="329"/>
<source>All Files (*)</source>
<translation>All Files (*)</translation>
</message>
25711,7 → 25611,7
<translation>Own Templates</translation>
</message>
<message>
<location filename="../../scribus/gtaction.cpp" line="76"/>
<location filename="../../scribus/gtaction.cpp" line="75"/>
<source>Importing text</source>
<translation>Importing text</translation>
</message>
25719,7 → 25619,7
<location filename="../../scribus/fileloader.cpp" line="83"/>
<location filename="../../scribus/gtgettext.cpp" line="176"/>
<location filename="../../scribus/scgtplugin.cpp" line="66"/>
<location filename="../../scribus/util_formats.cpp" line="278"/>
<location filename="../../scribus/util_formats.cpp" line="282"/>
<source>All Supported Formats</source>
<translation>All Supported Formats</translation>
</message>
28419,7 → 28319,7
<translation>Unit out of range. Use one of the scribus.UNIT_* constants.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="32"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="31"/>
<source>Target is not an image frame.</source>
<comment>python error</comment>
<translation>Target is not an image frame.</translation>
28557,8 → 28457,8
<translation>&apos;allTypes&apos; attribute is READ-ONLY</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="165"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="199"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="167"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="203"/>
<source>Failed to export image</source>
<comment>python error</comment>
<translation>Failed to export image</translation>
28598,17 → 28498,17
<translation>Colour not found in default colours.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="435"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="434"/>
<source>Cannot scale by 0%.</source>
<comment>python error</comment>
<translation>Cannot scale by 0%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="94"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="137"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="181"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="209"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="51"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="93"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="136"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="180"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="208"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="543"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="570"/>
<source>Specified item not an image frame.</source>
28629,53 → 28529,53
<translation>Cannot render an empty sample.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="169"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="200"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="273"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="304"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="335"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="366"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="458"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="489"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="520"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="551"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="582"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="613"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="644"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="676"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="168"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="199"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="272"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="303"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="334"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="365"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="457"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="488"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="519"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="550"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="581"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="612"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="643"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="675"/>
<source>Cannot have an empty layer name.</source>
<comment>python error</comment>
<translation>Cannot have an empty layer name.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="177"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="257"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="288"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="319"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="350"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="381"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="412"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="443"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="474"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="505"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="536"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="567"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="598"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="629"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="660"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="707"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="176"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="256"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="287"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="318"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="349"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="380"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="411"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="442"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="473"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="504"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="535"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="566"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="597"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="628"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="659"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="706"/>
<source>Layer not found.</source>
<comment>python error</comment>
<translation>Layer not found.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="681"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="680"/>
<source>Cannot remove the last layer.</source>
<comment>python error</comment>
<translation>Cannot remove the last layer.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="722"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="721"/>
<source>Cannot create layer without a name.</source>
<comment>python error</comment>
<translation>Cannot create layer without a name.</translation>
28999,7 → 28899,7
<translation>element &lt;lpiSettingsEntry&gt; lacks `name&apos; attribute</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="766"/>
<location filename="../../scribus/scribus.cpp" line="764"/>
<source>Scribus Development Version</source>
<translation>Scribus Development Version</translation>
</message>
29060,8 → 28960,8
</message>
<message>
<location filename="../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../scribus/scribus.cpp" line="2158"/>
<location filename="../../scribus/scribus.cpp" line="2403"/>
<location filename="../../scribus/scribus.cpp" line="2156"/>
<location filename="../../scribus/scribus.cpp" line="2401"/>
<source>Document Template: </source>
<translation>Document Template: </translation>
</message>
29088,95 → 28988,95
<translation>Invalid property</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="313"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="316"/>
<source>Couldn&apos;t convert result type &apos;%1&apos;.</source>
<translation>Couldn&apos;t convert result type &apos;%1&apos;.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="443"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="446"/>
<source>Property type &apos;%1&apos; not supported</source>
<translation>Property type &apos;%1&apos; not supported</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="461"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="464"/>
<source>Couldn&apos;t convert &apos;%1&apos; to property type &apos;%2&apos;</source>
<translation>Couldn&apos;t convert &apos;%1&apos; to property type &apos;%2&apos;</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="469"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="472"/>
<source>Types matched, but setting property failed.</source>
<translation>Types matched, but setting property failed.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="123"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="139"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="122"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="138"/>
<source>Unable to save pixmap</source>
<comment>scripter error</comment>
<translation>Unable to save pixmap</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="234"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="235"/>
<source>Point list must contain at least two points (four values).</source>
<comment>python error</comment>
<translation>Point list must contain at least two points (four values).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="239"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="316"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="240"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="317"/>
<source>Point list must contain an even number of values.</source>
<comment>python error</comment>
<translation>Point list must contain an even number of values.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="311"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="312"/>
<source>Point list must contain at least three points (six values).</source>
<comment>python error</comment>
<translation>Point list must contain at least three points (six values).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="392"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="393"/>
<source>Point list must contain at least four points (eight values).</source>
<comment>python error</comment>
<translation>Point list must contain at least four points (eight values).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="397"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="398"/>
<source>Point list must have a multiple of six values.</source>
<comment>python error</comment>
<translation>Point list must have a multiple of six values.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="495"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="496"/>
<source>Object not found.</source>
<comment>python error</comment>
<translation>Object not found.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="598"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="599"/>
<source>Cannot get style of a non-text frame.</source>
<comment>python error</comment>
<translation>Cannot get style of a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="664"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="665"/>
<source>Style not found.</source>
<comment>python error</comment>
<translation>Style not found.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="722"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="723"/>
<source>Cannot set character style on a non-text frame.</source>
<comment>python error</comment>
<translation>Cannot set character style on a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="747"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="748"/>
<source>Character style not found.</source>
<comment>python error</comment>
<translation>Character style not found.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="639"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="640"/>
<source>Cannot set style on a non-text frame.</source>
<comment>python error</comment>
<translation>Cannot set style on a non-text frame.</translation>
29272,48 → 29172,48
<translation>Only text frames can be checked for overflowing</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="51"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="585"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="586"/>
<source>&amp;Execute Script...</source>
<translation>&amp;Execute Script...</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="586"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="53"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="587"/>
<source>Show &amp;Console</source>
<translation>Show &amp;Console</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="53"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="587"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="54"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="588"/>
<source>&amp;About Script...</source>
<translation>&amp;About Script...</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="85"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="589"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="86"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="590"/>
<source>&amp;Script</source>
<translation>&amp;Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="86"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="590"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="87"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="591"/>
<source>&amp;Scribus Scripts</source>
<translation>&amp;Scribus Scripts</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="89"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="591"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="90"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="592"/>
<source>&amp;Recent Scripts</source>
<translation>&amp;Recent Scripts</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="557"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="558"/>
<source>About Script</source>
<translation>About Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="872"/>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="910"/>
<source>Scribus Python interface module
 
This module is the Python interface for Scribus. It provides functions
29441,8 → 29341,8
</message>
<message>
<location filename="../../scribus/main_nix.cpp" line="117"/>
<location filename="../../scribus/main_win32.cpp" line="292"/>
<location filename="../../scribus/main_win32.cpp" line="344"/>
<location filename="../../scribus/main_win32.cpp" line="294"/>
<location filename="../../scribus/main_win32.cpp" line="346"/>
<source>Scribus Crash</source>
<translation>Scribus Crash</translation>
</message>
29452,13 → 29352,13
<translation>Scribus crashes due to Signal #%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="361"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="360"/>
<source>Need selection or argument list of items to group</source>
<comment>python error</comment>
<translation>Need selection or argument list of items to group</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="393"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="392"/>
<source>Cannot group less than two items</source>
<comment>python error</comment>
<translation>Cannot group less than two items</translation>
29494,7 → 29394,7
<message>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3260"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2171"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="6135"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="6134"/>
<source>Copy #%1 of </source>
<translation>Copy #%1 of </translation>
</message>
29559,7 → 29459,7
<translation>OpenOffice.org Draw Importer</translation>
</message>
<message>
<location filename="../../scribus/main_win32.cpp" line="294"/>
<location filename="../../scribus/main_win32.cpp" line="296"/>
<source>Scribus crashes due to the following exception : %1</source>
<translation>Scribus crashes due to the following exception : %1</translation>
</message>
29625,7 → 29525,7
<translation>Searching for Fonts</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4145"/>
<location filename="../../scribus/scribus.cpp" line="4141"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</translation>
</message>
30207,49 → 30107,55
<translation>Configfile %1 not found or the file is not readable</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="58"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="60"/>
<source>Cannot have an empty paragraph style name.</source>
<comment>python error</comment>
<translation>Cannot have an empty paragraph style name.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="64"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="66"/>
<source>hasdropcap is true but dropcaplines value is invalid</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="70"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="72"/>
<source>hasdropcap and bullet are not allowed to be specified together.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="180"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="126"/>
<source>invalid tab-position specified.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="218"/>
<source>Cannot have an empty char style name.</source>
<comment>python error</comment>
<translation>Cannot have an empty char style name.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="189"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="227"/>
<source>Specified font is not available.</source>
<comment>python error</comment>
<translation>Specified font is not available.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="201"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="239"/>
<source>Specified fill color is not available in document.</source>
<comment>python error</comment>
<translation>Specified fill colour is not available in document.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="209"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="247"/>
<source>Specified stroke color is not available in document.</source>
<comment>python error</comment>
<translation>Specified stroke colour is not available in document.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="351"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="389"/>
<source>Specified color is not available in document.</source>
<comment>python error</comment>
<translation>Specified colour is not available in document.</translation>
30664,7 → 30570,7
<translation>Cannot set cell bottom padding on a non-table item.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="136"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="137"/>
<source>Both numRows and numColumns must be greater than 0.</source>
<comment>python error</comment>
<translation>Both numRows and numColumns must be greater than 0.</translation>
30959,7 → 30865,7
<translation>Nepali</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="767"/>
<location filename="../../scribus/scribus.cpp" line="765"/>
<source>You are running a development version of Scribus 1.5.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.5.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation>You are running a development version of Scribus 1.5.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.5.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</translation>
</message>
30969,12 → 30875,12
<translation>PUB Importer</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3321"/>
<location filename="../../scribus/scribus.cpp" line="3317"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="18190"/>
<location filename="../../scribus/scribusdoc.cpp" line="18232"/>
<source>Unacceptable settings for note style</source>
<translation>Unacceptable settings for note style</translation>
</message>
32090,7 → 31996,7
<name>SMCellStyle</name>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="31"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="411"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="389"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
32110,18 → 32016,7
<translation>New Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="170"/>
<source>Clone of %1</source>
<translation>Clone of %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="394"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="526"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="504"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Setting that style as parent would create an infinite loop.</translation>
</message>
32162,33 → 32057,22
<context>
<name>SMCharacterStyle</name>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2109"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2087"/>
<source>Character Styles</source>
<translation>Character Styles</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2114"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2092"/>
<source>Character Style</source>
<translation>Character Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2247"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2225"/>
<source>New Style</source>
<translation>New Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2269"/>
<source>Clone of %1</source>
<translation>Clone of %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2293"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="3072"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="3028"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Setting that style as parent would create an infinite loop.</translation>
</message>
32226,102 → 32110,102
<context>
<name>SMFontFeatures</name>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="481"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="489"/>
<source>Default Capitals</source>
<translation>Default Capitals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="484"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="492"/>
<source>Small Capitals</source>
<translation>Small Capitals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="486"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="494"/>
<source>Small Capitals from Capitals</source>
<translation>Small Capitals from Capitals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="488"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="496"/>
<source>Petite Capitals</source>
<translation>Petite Capitals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="490"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="498"/>
<source>Petite Capitals from Capitals</source>
<translation>Petite Capitals from Capitals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="492"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="500"/>
<source>Unicase</source>
<translation>Unicase</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="494"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="502"/>
<source>Titling</source>
<translation>Titling</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="502"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="510"/>
<source>Default Position</source>
<translation>Default Position</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="505"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="513"/>
<source>Subscript</source>
<translation>Subscript</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="507"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="515"/>
<source>Superscript</source>
<translation>Superscript</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="509"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="517"/>
<source>Ordinals</source>
<translation>Ordinals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="517"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="525"/>
<source>Default Numerals</source>
<translation>Default Numerals</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="520"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="528"/>
<source>Lining</source>
<translation>Lining</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="522"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="530"/>
<source>Old Style</source>
<translation>Old Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="530"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="538"/>
<source>Default Numeral Width</source>
<translation>Default Numeral Width</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="533"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="541"/>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="535"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="543"/>
<source>Tabular</source>
<translation>Tabular</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="543"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="551"/>
<source>No Fractions</source>
<translation>No Fractions</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="546"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="554"/>
<source>Diagonal Fractions</source>
<translation>Diagonal Fractions</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="548"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="556"/>
<source>Stacked Fractions</source>
<translation>Stacked Fractions</translation>
</message>
32329,37 → 32213,26
<context>
<name>SMLineStyle</name>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="35"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="381"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="36"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="402"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="45"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="46"/>
<source>Line Styles</source>
<translation>Line Styles</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="50"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="51"/>
<source>Line Style</source>
<translation>Line Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="192"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="193"/>
<source>New Style</source>
<translation>New Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="202"/>
<source>Clone of %1</source>
<translation>Clone of %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="215"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>SMLineStyleWidget</name>
32846,18 → 32719,7
<translation>New Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="252"/>
<source>Clone of %1</source>
<translation>Clone of %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="277"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="1987"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="1965"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Setting that style as parent would create an infinite loop.</translation>
</message>
32988,7 → 32850,7
<name>SMTableStyle</name>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="27"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="407"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="385"/>
<source>Properties</source>
<translation>Properties</translation>
</message>
33008,18 → 32870,7
<translation>New Style</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="166"/>
<source>Clone of %1</source>
<translation>Clone of %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="390"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="524"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="502"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Setting that style as parent would create an infinite loop.</translation>
</message>
34680,8 → 34531,8
<translation>Scribus 1.2.x Document</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1947"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="2474"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1948"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="2478"/>
<source>Copy #%1 of </source>
<translation>Copy #%1 of </translation>
</message>
34696,7 → 34547,7
<translation>Allows Scribus to read Scribus 1.2.x formatted files.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1372"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1373"/>
<source>You have opened a file produced by Scribus 1.2.x.
If you save it in this version, it will no longer be readable by older Scribus versions.</source>
<translation>You have opened a file produced by Scribus 1.2.x.
34711,7 → 34562,7
<context>
<name>Scribus134Format</name>
<message>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3668"/>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3670"/>
<source>Copy #%1 of </source>
<translation>Copy #%1 of </translation>
</message>
34735,7 → 34586,7
<context>
<name>Scribus13Format</name>
<message>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2682"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2684"/>
<source>Copy #%1 of </source>
<translation>Copy #%1 of </translation>
</message>
34846,7 → 34697,7
<location filename="../../scribus/scribusdoc.cpp" line="204"/>
<location filename="../../scribus/scribusdoc.cpp" line="210"/>
<location filename="../../scribus/scribusdoc.cpp" line="242"/>
<location filename="../../scribus/scribusdoc.cpp" line="16541"/>
<location filename="../../scribus/scribusdoc.cpp" line="16583"/>
<source>Document</source>
<translation>Document</translation>
</message>
34856,27 → 34707,27
<translation>Background</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11346"/>
<location filename="../../scribus/scribusdoc.cpp" line="11381"/>
<source>Cannot Delete In-Use Item</source>
<translation>Cannot Delete In-Use Item</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11346"/>
<location filename="../../scribus/scribusdoc.cpp" line="11381"/>
<source>The item %1 is currently being edited by Story Editor. The delete operation will be cancelled</source>
<translation>The item %1 is currently being edited by Story Editor. The delete operation will be cancelled</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11949"/>
<location filename="../../scribus/scribusdoc.cpp" line="11988"/>
<source>Some objects are locked.</source>
<translation>Some objects are locked.</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11945"/>
<location filename="../../scribus/scribusdoc.cpp" line="11984"/>
<source>&amp;Unlock All</source>
<translation>&amp;Unlock All</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11946"/>
<location filename="../../scribus/scribusdoc.cpp" line="11985"/>
<source>&amp;Skip locked objects</source>
<translation>&amp;Skip locked objects</translation>
</message>
34887,22 → 34738,22
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="950"/>
<location filename="../../scribus/scribusdoc.cpp" line="16129"/>
<location filename="../../scribus/scribusdoc.cpp" line="16171"/>
<source>Adjusting Colors</source>
<translation>Adjusting Colours</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="9003"/>
<location filename="../../scribus/scribusdoc.cpp" line="9038"/>
<source>remove direct paragraph formatting</source>
<translation>remove direct paragraph formatting</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="9472"/>
<location filename="../../scribus/scribusdoc.cpp" line="9507"/>
<source>remove direct char formatting</source>
<translation>remove direct char formatting</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13553"/>
<location filename="../../scribus/scribusdoc.cpp" line="13592"/>
<source>Number of copies: %1
Horizontal shift: %2
Vertical shift: %3
34913,7 → 34764,7
Rotation: %4</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13588"/>
<location filename="../../scribus/scribusdoc.cpp" line="13627"/>
<source>Number of rows: %1
Number of columns: %2
Horizontal gap: %3
34924,14 → 34775,14
Vertical gap: %4</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13707"/>
<location filename="../../scribus/scribusdoc.cpp" line="13746"/>
<source>Copied %1 items on %2 pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="14923"/>
<location filename="../../scribus/scribusdoc.cpp" line="14978"/>
<location filename="../../scribus/scribusdoc.cpp" line="15111"/>
<location filename="../../scribus/scribusdoc.cpp" line="14967"/>
<location filename="../../scribus/scribusdoc.cpp" line="15022"/>
<location filename="../../scribus/scribusdoc.cpp" line="15155"/>
<source>Group%1</source>
<translation>Group%1</translation>
</message>
34942,23 → 34793,23
<translation>Imported</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="16557"/>
<location filename="../../scribus/scribusdoc.cpp" line="16599"/>
<source>File %1 autosaved</source>
<translation>File %1 autosaved</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="17815"/>
<location filename="../../scribus/scribusdoc.cpp" line="17853"/>
<location filename="../../scribus/scribusdoc.cpp" line="17857"/>
<location filename="../../scribus/scribusdoc.cpp" line="17895"/>
<source>No Style</source>
<translation>No Style</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="18184"/>
<location filename="../../scribus/scribusdoc.cpp" line="18226"/>
<source>%1 note style has document as range and provide same numbering style as set %2</source>
<translation>%1 note style has document as range and provide same numbering style as set %2</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11253"/>
<location filename="../../scribus/scribusdoc.cpp" line="11288"/>
<source>Do you really want to clear the content of all selected frames?</source>
<translation>Do you really want to clear the content of all selected frames?</translation>
</message>
34966,96 → 34817,96
<context>
<name>ScribusMainWindow</name>
<message>
<location filename="../../scribus/scribus.cpp" line="403"/>
<location filename="../../scribus/scribus.cpp" line="401"/>
<source>Initializing Story Editor</source>
<translation>Initialising Story Editor</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="417"/>
<location filename="../../scribus/scribus.cpp" line="415"/>
<source>Reading Scrapbook</source>
<translation>Reading Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3490"/>
<location filename="../../scribus/scribus.cpp" line="3486"/>
<source>Fatal Error</source>
<translation>Fatal Error</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="800"/>
<location filename="../../scribus/scribus.cpp" line="798"/>
<source>Open &amp;Recent</source>
<translation>Open &amp;Recent</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="808"/>
<location filename="../../scribus/scribus.cpp" line="3326"/>
<location filename="../../scribus/scribus.cpp" line="806"/>
<location filename="../../scribus/scribus.cpp" line="3322"/>
<source>&amp;Import</source>
<translation>&amp;Import</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="815"/>
<location filename="../../scribus/scribus.cpp" line="813"/>
<source>&amp;Export</source>
<translation>&amp;Export</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="911"/>
<location filename="../../scribus/scribus.cpp" line="909"/>
<source>Preview Settings</source>
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="886"/>
<location filename="../../scribus/scribus.cpp" line="884"/>
<source>Level</source>
<translation>Level</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="892"/>
<location filename="../../scribus/scribus.cpp" line="890"/>
<source>Send to La&amp;yer</source>
<translation>Send to La&amp;yer</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="918"/>
<location filename="../../scribus/scribus.cpp" line="916"/>
<source>&amp;PDF Options</source>
<translation>&amp;PDF Options</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="2186"/>
<location filename="../../scribus/scribus.cpp" line="2226"/>
<location filename="../../scribus/scribus.cpp" line="3800"/>
<location filename="../../scribus/scribus.cpp" line="4249"/>
<location filename="../../scribus/scribus.cpp" line="4323"/>
<location filename="../../scribus/scribus.cpp" line="4480"/>
<location filename="../../scribus/scribus.cpp" line="2184"/>
<location filename="../../scribus/scribus.cpp" line="2224"/>
<location filename="../../scribus/scribus.cpp" line="3796"/>
<location filename="../../scribus/scribus.cpp" line="4245"/>
<location filename="../../scribus/scribus.cpp" line="4319"/>
<location filename="../../scribus/scribus.cpp" line="4476"/>
<location filename="../../scribus/scribus.cpp" line="8651"/>
<source>Ready</source>
<translation>Ready</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3149"/>
<location filename="../../scribus/scribus.cpp" line="3267"/>
<location filename="../../scribus/scribus.cpp" line="3896"/>
<location filename="../../scribus/scribus.cpp" line="3145"/>
<location filename="../../scribus/scribus.cpp" line="3263"/>
<location filename="../../scribus/scribus.cpp" line="3892"/>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3288"/>
<location filename="../../scribus/scribus.cpp" line="3284"/>
<source>Importing Pages...</source>
<translation>Importing Pages...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3319"/>
<location filename="../../scribus/scribus.cpp" line="3315"/>
<source>Import Page(s)</source>
<translation>Import Page(s)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3365"/>
<location filename="../../scribus/scribus.cpp" line="3361"/>
<source>Import done</source>
<translation>Import done</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3369"/>
<location filename="../../scribus/scribus.cpp" line="3365"/>
<source>Found nothing to import</source>
<translation>Found nothing to import</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3443"/>
<location filename="../../scribus/scribus.cpp" line="3439"/>
<source>File does not exist on the specified path :
%1</source>
<translation>File does not exist on the specified path :
35062,38 → 34913,38
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3491"/>
<location filename="../../scribus/scribus.cpp" line="3487"/>
<source>File %1 is not in an acceptable format</source>
<translation>File %1 is not in an acceptable format</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3532"/>
<location filename="../../scribus/scribus.cpp" line="3528"/>
<source>Loading...</source>
<translation>Loading...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3698"/>
<location filename="../../scribus/scribus.cpp" line="3694"/>
<source> was replaced by: </source>
<translation> was replaced by: </translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3728"/>
<location filename="../../scribus/scribus.cpp" line="3724"/>
<source>(converted)</source>
<translation>(converted)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4087"/>
<location filename="../../scribus/scribus.cpp" line="4083"/>
<source>Filename and Path for Image</source>
<translation>Filename and Path for Image</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4087"/>
<location filename="../../scribus/scribus.cpp" line="4083"/>
<source>All Files (*)</source>
<translation>All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4179"/>
<location filename="../../scribus/scribus.cpp" line="4244"/>
<location filename="../../scribus/scribus.cpp" line="4175"/>
<location filename="../../scribus/scribus.cpp" line="4240"/>
<location filename="../../scribus/scribus.cpp" line="7087"/>
<location filename="../../scribus/scribus.cpp" line="7249"/>
<location filename="../../scribus/scribus.cpp" line="7263"/>
35103,32 → 34954,32
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4229"/>
<location filename="../../scribus/scribus.cpp" line="5291"/>
<location filename="../../scribus/scribus.cpp" line="4225"/>
<location filename="../../scribus/scribus.cpp" line="5287"/>
<location filename="../../scribus/scribus.cpp" line="7078"/>
<source>Save As</source>
<translation>Save As</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4258"/>
<location filename="../../scribus/scribus.cpp" line="4254"/>
<source>Saving...</source>
<translation>Saving...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4386"/>
<location filename="../../scribus/scribus.cpp" line="4382"/>
<location filename="../../scribus/scribus.cpp" line="6939"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4421"/>
<location filename="../../scribus/scribus.cpp" line="4417"/>
<source>Printing...</source>
<translation>Printing...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1103"/>
<location filename="../../scribus/scribus.cpp" line="2255"/>
<location filename="../../scribus/scribus.cpp" line="4425"/>
<location filename="../../scribus/scribus.cpp" line="1101"/>
<location filename="../../scribus/scribus.cpp" line="2253"/>
<location filename="../../scribus/scribus.cpp" line="4421"/>
<location filename="../../scribus/scribus.cpp" line="7055"/>
<location filename="../../scribus/scribus.cpp" line="8415"/>
<source>Document</source>
35135,38 → 34986,38
<translation>Document</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4468"/>
<location filename="../../scribus/scribus.cpp" line="4464"/>
<source>Printing failed!</source>
<translation>Printing failed!</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4559"/>
<location filename="../../scribus/scribus.cpp" line="4555"/>
<source>Cannot Cut In-Use Item</source>
<translation>Cannot Cut In-Use Item</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4559"/>
<location filename="../../scribus/scribus.cpp" line="4555"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5205"/>
<location filename="../../scribus/scribus.cpp" line="5201"/>
<source>About Qt</source>
<translation>About Qt</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5236"/>
<location filename="../../scribus/scribus.cpp" line="5232"/>
<source>Scribus Manual</source>
<translation>Scribus Manual</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6336"/>
<location filename="../../scribus/scribus.cpp" line="6332"/>
<source>&amp;Size:</source>
<translation>&amp;Size:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1431"/>
<location filename="../../scribus/scribus.cpp" line="6336"/>
<location filename="../../scribus/scribus.cpp" line="1429"/>
<location filename="../../scribus/scribus.cpp" line="6332"/>
<source>Size</source>
<translation>Size</translation>
</message>
35217,48 → 35068,48
<translation>&amp;Unlock All</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4006"/>
<location filename="../../scribus/scribus.cpp" line="4002"/>
<location filename="../../scribus/scribus.cpp" line="8850"/>
<source>Do you really want to replace your existing image?</source>
<translation>Do you really want to replace your existing image?</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="842"/>
<location filename="../../scribus/scribus.cpp" line="840"/>
<source>Contents</source>
<translation>Contents</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="975"/>
<location filename="../../scribus/scribus.cpp" line="973"/>
<source>&amp;Character</source>
<translation>&amp;Character</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="996"/>
<location filename="../../scribus/scribus.cpp" line="994"/>
<source>&amp;Quote</source>
<translation>&amp;Quote</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1037"/>
<location filename="../../scribus/scribus.cpp" line="1035"/>
<source>Liga&amp;ture</source>
<translation>Liga&amp;ture</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="840"/>
<location filename="../../scribus/scribus.cpp" line="838"/>
<source>Paste Recent</source>
<translation>Paste Recent</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4227"/>
<location filename="../../scribus/scribus.cpp" line="4223"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Documents (*.sla *.sla.gz);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3918"/>
<location filename="../../scribus/scribus.cpp" line="3914"/>
<source>Do you really want to clear all your text?</source>
<translation>Do you really want to clear all your text?</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3695"/>
<location filename="../../scribus/scribus.cpp" line="3691"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Some colour profiles used by this document are not installed:</translation>
</message>
35268,7 → 35119,7
<translation>%1;;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="388"/>
<location filename="../../scribus/scribus.cpp" line="386"/>
<source>Applying User Shortcuts</source>
<translation>Applying User Shortcuts</translation>
</message>
35278,31 → 35129,31
<translation>Updating Images</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4177"/>
<location filename="../../scribus/scribus.cpp" line="4242"/>
<location filename="../../scribus/scribus.cpp" line="4173"/>
<location filename="../../scribus/scribus.cpp" line="4238"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>Your document was saved to a temporary file and could not be moved: %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4532"/>
<location filename="../../scribus/scribus.cpp" line="4528"/>
<source>Print engine initialization failed</source>
<translation>Print engine initialisation failed</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3123"/>
<location filename="../../scribus/scribus.cpp" line="3119"/>
<source>All Supported Formats</source>
<translation>All Supported Formats</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9128"/>
<location filename="../../scribus/scribus.cpp" line="9203"/>
<location filename="../../scribus/scribus.cpp" line="9129"/>
<location filename="../../scribus/scribus.cpp" line="9204"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9128"/>
<location filename="../../scribus/scribus.cpp" line="9203"/>
<location filename="../../scribus/scribus.cpp" line="9129"/>
<location filename="../../scribus/scribus.cpp" line="9204"/>
<source>New Entry</source>
<translation>New Entry</translation>
</message>
35312,17 → 35163,17
<translation>Ghostscript is missing : PostScript Print Preview is not available</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3474"/>
<location filename="../../scribus/scribus.cpp" line="3470"/>
<source>Document is already opened</source>
<translation>Document is already opened</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3475"/>
<location filename="../../scribus/scribus.cpp" line="3471"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation>This document is already in use.You&apos;ll be switched into its window now.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3492"/>
<location filename="../../scribus/scribus.cpp" line="3488"/>
<source>The file may be damaged or may have been produced in a later version of Scribus.</source>
<translation>The file may be damaged or may have been produced in a later version of Scribus.</translation>
</message>
35332,173 → 35183,173
<translation>Editing Symbol: %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1385"/>
<location filename="../../scribus/scribus.cpp" line="1383"/>
<source>Unknown</source>
<translation>Unknown</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1436"/>
<location filename="../../scribus/scribus.cpp" line="1434"/>
<source>%1 Objects selected, Selection Size = %2 x %3</source>
<translation>%1 Objects selected, Selection Size = %2 x %3</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="409"/>
<location filename="../../scribus/scribus.cpp" line="407"/>
<source>Initializing Languages</source>
<translation>Initialising Languages</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="578"/>
<location filename="../../scribus/scribus.cpp" line="576"/>
<source>All Supported Formats (%1);;%2All Files (*)</source>
<translation>All Supported Formats (%1);;%2All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1050"/>
<location filename="../../scribus/scribus.cpp" line="1048"/>
<source>Marks</source>
<translation>Marks</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9554"/>
<location filename="../../scribus/scribus.cpp" line="9555"/>
<source>Insert new </source>
<translation>Insert new </translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9571"/>
<location filename="../../scribus/scribus.cpp" line="9805"/>
<location filename="../../scribus/scribus.cpp" line="9572"/>
<location filename="../../scribus/scribus.cpp" line="9806"/>
<source>Anchor mark</source>
<translation>Anchor mark</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9579"/>
<location filename="../../scribus/scribus.cpp" line="9818"/>
<location filename="../../scribus/scribus.cpp" line="9580"/>
<location filename="../../scribus/scribus.cpp" line="9819"/>
<source>Mark with &lt;%1&gt; variable text</source>
<translation>Mark with &lt;%1&gt; variable text</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9587"/>
<location filename="../../scribus/scribus.cpp" line="9856"/>
<location filename="../../scribus/scribus.cpp" line="9588"/>
<location filename="../../scribus/scribus.cpp" line="9857"/>
<source>Mark to %1 item</source>
<translation>Mark to %1 item</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9597"/>
<location filename="../../scribus/scribus.cpp" line="9877"/>
<location filename="../../scribus/scribus.cpp" line="9598"/>
<location filename="../../scribus/scribus.cpp" line="9878"/>
<source>Mark to %1 mark</source>
<translation>Mark to %1 mark</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="872"/>
<location filename="../../scribus/scribus.cpp" line="870"/>
<source>Duplicate/Transform</source>
<translation>Duplicate/Transform</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="342"/>
<location filename="../../scribus/scribus.cpp" line="340"/>
<source>Scribus</source>
<translation>Scribus</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="877"/>
<location filename="../../scribus/scribus.cpp" line="875"/>
<source>Grouping</source>
<translation>Grouping</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="882"/>
<location filename="../../scribus/scribus.cpp" line="880"/>
<source>Locking</source>
<translation>Locking</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="894"/>
<location filename="../../scribus/scribus.cpp" line="892"/>
<source>Send to</source>
<translation>Send to</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="896"/>
<location filename="../../scribus/scribus.cpp" line="894"/>
<source>Scrapbook</source>
<translation>Scrapbook</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="900"/>
<location filename="../../scribus/scribus.cpp" line="898"/>
<source>Adjust</source>
<translation>Adjust</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="905"/>
<location filename="../../scribus/scribus.cpp" line="903"/>
<source>Image</source>
<translation>Image</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="932"/>
<location filename="../../scribus/scribus.cpp" line="930"/>
<source>Text Frame Links</source>
<translation>Text Frame Links</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="937"/>
<location filename="../../scribus/scribus.cpp" line="935"/>
<source>Path Tools</source>
<translation>Path Tools</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="947"/>
<location filename="../../scribus/scribus.cpp" line="945"/>
<source>Welding</source>
<translation>Welding</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1022"/>
<location filename="../../scribus/scribus.cpp" line="1020"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>S&amp;paces &amp;&amp; Breaks</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1077"/>
<location filename="../../scribus/scribus.cpp" line="1075"/>
<source>Zoom</source>
<translation>Zoom</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1086"/>
<location filename="../../scribus/scribus.cpp" line="1084"/>
<source>Preview</source>
<translation>Preview</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1094"/>
<location filename="../../scribus/scribus.cpp" line="1092"/>
<source>Text Frames</source>
<translation>Text Frames</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1100"/>
<location filename="../../scribus/scribus.cpp" line="1098"/>
<source>Image Frames</source>
<translation>Image Frames</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1109"/>
<location filename="../../scribus/scribus.cpp" line="1107"/>
<source>Grids and Guides</source>
<translation>Grids and Guides</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1258"/>
<location filename="../../scribus/scribus.cpp" line="1256"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1300"/>
<location filename="../../scribus/scribus.cpp" line="1298"/>
<location filename="../../scribus/scribus.cpp" line="8647"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1302"/>
<location filename="../../scribus/scribus.cpp" line="1300"/>
<location filename="../../scribus/scribus.cpp" line="8648"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5291"/>
<location filename="../../scribus/scribus.cpp" line="5287"/>
<source>Text Files (*.txt);;All Files (*)</source>
<translation>Text Files (*.txt);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6349"/>
<location filename="../../scribus/scribus.cpp" line="6345"/>
<source>&amp;Language:</source>
<translation>&amp;Language:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6349"/>
<location filename="../../scribus/scribus.cpp" line="6345"/>
<source>Language</source>
<translation>Language</translation>
</message>
35543,27 → 35394,27
<translation>Select the current unit</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9787"/>
<location filename="../../scribus/scribus.cpp" line="9788"/>
<source>Edit %1</source>
<translation>Edit %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="924"/>
<location filename="../../scribus/scribus.cpp" line="922"/>
<source>C&amp;onvert to</source>
<translation>C&amp;onvert to</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1431"/>
<location filename="../../scribus/scribus.cpp" line="1429"/>
<source>%1 selected</source>
<translation>%1 selected</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3325"/>
<location filename="../../scribus/scribus.cpp" line="3321"/>
<source>C&amp;reate</source>
<translation>C&amp;reate</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1089"/>
<location filename="../../scribus/scribus.cpp" line="1087"/>
<source>Measurement</source>
<translation>Measurement</translation>
</message>
35747,72 → 35598,72
<context>
<name>ScribusView</name>
<message>
<location filename="../../scribus/scribusview.cpp" line="1047"/>
<location filename="../../scribus/scribusview.cpp" line="1045"/>
<source>Do you really want to clear all your text?</source>
<translation>Do you really want to clear all your text?</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1186"/>
<location filename="../../scribus/scribusview.cpp" line="1184"/>
<source>Copy Here</source>
<translation>Copy Here</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1187"/>
<location filename="../../scribus/scribusview.cpp" line="1185"/>
<source>Move Here</source>
<translation>Move Here</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1188"/>
<location filename="../../scribus/scribusview.cpp" line="1186"/>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10634"/>
<location filename="../../scribus/pageitem.cpp" line="10644"/>
<source>Print: </source>
<translation>Print: </translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10636"/>
<location filename="../../scribus/pageitem.cpp" line="10646"/>
<source>Enabled</source>
<translation>Enabled</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10638"/>
<location filename="../../scribus/pageitem.cpp" line="10648"/>
<source>Disabled</source>
<translation>Disabled</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="3158"/>
<location filename="../../scribus/scribusview.cpp" line="3160"/>
<source>Cannot Convert In-Use Item</source>
<translation>Cannot Convert In-Use Item</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="3158"/>
<location filename="../../scribus/scribusview.cpp" line="3160"/>
<source>The item %1 is currently being edited by Story Editor. The convert to outlines operation for this item will be skipped</source>
<translation>The item %1 is currently being edited by Story Editor. The convert to outlines operation for this item will be skipped</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="2145"/>
<location filename="../../scribus/scribusview.cpp" line="2143"/>
<source>Page %1 to %2</source>
<translation>Page %1 to %2</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="310"/>
<location filename="../../scribus/scribusview.cpp" line="308"/>
<source>Preview Mode</source>
<translation>Preview Mode</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="311"/>
<location filename="../../scribus/scribusview.cpp" line="309"/>
<source>CMS is active. Therefore the color display may not match the perception by visually impaired</source>
<translation>CMS is active. Therefore the colour display may not match the perception by visually impaired</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="226"/>
<location filename="../../scribus/scribusview.cpp" line="224"/>
<source>End Edit</source>
<translation>End Edit</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="255"/>
<location filename="../../scribus/scribusview.cpp" line="253"/>
<source>Click here to leave this special edit mode</source>
<translation>Click here to leave this special edit mode</translation>
</message>
35965,64 → 35816,64
<context>
<name>ScripterCore</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="351"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="448"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="612"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="352"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="449"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="613"/>
<source>Script error</source>
<translation>Script error</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="353"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="354"/>
<source>If you are running an official script report it at &lt;a href=&quot;http://bugs.scribus.net&quot;&gt;bugs.scribus.net&lt;/a&gt; please.</source>
<translation>If you are running an official script report it at &lt;a href=&quot;http://bugs.scribus.net&quot;&gt;bugs.scribus.net&lt;/a&gt; please.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="355"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="356"/>
<source>This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker.</source>
<translation>This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="534"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="535"/>
<source>Examine Script</source>
<translation>Examine Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="449"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="450"/>
<source>There was an internal error while trying the command you entered. Details were printed to stderr. </source>
<translation>There was an internal error while trying the command you entered. Details were printed to stderr. </translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="578"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="579"/>
<source>Startup Script error</source>
<translation>Startup Script error</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="579"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="580"/>
<source>Could not find script: %1.</source>
<translation>Could not find script: %1.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="613"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="614"/>
<source>Setting up the Python plugin failed. Error details were printed to stderr. </source>
<translation>Setting up the Python plug-in failed. Error details were printed to stderr. </translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="547"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="548"/>
<source>Documentation for:</source>
<translation>Documentation for:</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="552"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="553"/>
<source>Script</source>
<translation>Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="552"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="553"/>
<source> doesn&apos;t contain any docstring!</source>
<translation> doesn&apos;t contain any docstring!</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="534"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="535"/>
<source>Python Scripts (*.py *.PY);;All Files (*)</source>
<translation>Python Scripts (*.py *.PY);;All Files (*)</translation>
</message>
37333,8 → 37184,8
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="261"/>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="427"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="79"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="85"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="78"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="84"/>
<source> dpi</source>
<translation> dpi</translation>
</message>
37414,14 → 37265,14
<translation>PDF/X Output Intent</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="286"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="285"/>
<source>Mandatory string for PDF/X or the PDF will fail PDF/X conformance. We recommend you use the title of the document.</source>
<translation>Mandatory string for PDF/X or the PDF will fail PDF/X conformance. We recommend you use the title of the document.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="503"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1251"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1259"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="502"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1250"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1258"/>
<source>Page</source>
<translation>Page</translation>
</message>
37468,57 → 37319,57
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="841"/>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="854"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="100"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="103"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="99"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="102"/>
<source> sec</source>
<translation> sec</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="746"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="671"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="867"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="670"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="866"/>
<source>No Effect</source>
<translation>No Effect</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="751"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="672"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="868"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="671"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="867"/>
<source>Blinds</source>
<translation>Blinds</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="756"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="673"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="869"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="672"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="868"/>
<source>Box</source>
<translation>Box</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="761"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="674"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="870"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="673"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="869"/>
<source>Dissolve</source>
<translation>Dissolve</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="766"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="675"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="871"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="674"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="870"/>
<source>Glitter</source>
<translation>Glitter</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="771"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="676"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="872"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="675"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="871"/>
<source>Split</source>
<translation>Split</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="776"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="677"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="873"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="676"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="872"/>
<source>Wipe</source>
<translation>Wipe</translation>
</message>
37758,112 → 37609,112
<translation>Output &amp;Profile:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="228"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="227"/>
<source>Show page previews of each page listed above.</source>
<translation>Show page previews of each page listed above.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="231"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="230"/>
<source>Type of the display effect.</source>
<translation>Type of the display effect.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="232"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="231"/>
<source>Direction of the effect of moving lines for the split and blind effects.</source>
<translation>Direction of the effect of moving lines for the split and blind effects.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="233"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="232"/>
<source>Starting position for the box and split effects.</source>
<translation>Starting position for the box and split effects.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="234"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="233"/>
<source>Direction of the glitter or wipe effects.</source>
<translation>Direction of the glitter or wipe effects.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="235"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="234"/>
<source>Apply the selected effect to all pages.</source>
<translation>Apply the selected effect to all pages.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="199"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="198"/>
<source>Export all pages to PDF</source>
<translation>Export all pages to PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="200"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="199"/>
<source>Export a range of pages to PDF</source>
<translation>Export a range of pages to PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="263"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="262"/>
<source>Embed a color profile for solid colors</source>
<translation>Embed a colour profile for solid colours</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="264"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="263"/>
<source>Color profile for solid colors</source>
<translation>Colour profile for solid colours</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="265"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="264"/>
<source>Rendering intent for solid colors</source>
<translation>Rendering intent for solid colours</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="266"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="265"/>
<source>Embed a color profile for images</source>
<translation>Embed a colour profile for images</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="267"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="266"/>
<source>Do not use color profiles that are embedded in source images</source>
<translation>Do not use colour profiles that are embedded in source images</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="268"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="267"/>
<source>Color profile for images</source>
<translation>Colour profile for images</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="269"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="268"/>
<source>Rendering intent for images</source>
<translation>Rendering intent for images</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="285"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="284"/>
<source>Output profile for printing. If possible, get some guidance from your printer on profile selection.</source>
<translation>Output profile for printing. If possible, get some guidance from your printer on profile selection.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="280"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="279"/>
<source>Distance for bleed from the top of the physical page</source>
<translation>Distance for bleed from the top of the physical page</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="281"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="280"/>
<source>Distance for bleed from the bottom of the physical page</source>
<translation>Distance for bleed from the bottom of the physical page</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="282"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="281"/>
<source>Distance for bleed from the left of the physical page</source>
<translation>Distance for bleed from the left of the physical page</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="283"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="282"/>
<source>Distance for bleed from the right of the physical page</source>
<translation>Distance for bleed from the right of the physical page</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="206"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="205"/>
<source>Mirror Page(s) horizontally</source>
<translation>Mirror Page(s) horizontally</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="207"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="206"/>
<source>Mirror Page(s) vertically</source>
<translation>Mirror Page(s) vertically</translation>
</message>
37878,17 → 37729,17
<translation>Compression &amp;Quality:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="257"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="256"/>
<source>Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied.</source>
<translation>Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="258"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="257"/>
<source>Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented.</source>
<translation>Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="270"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="269"/>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation>Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled.</translation>
</message>
37903,47 → 37754,47
<translation>Compression Metho&amp;d:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="223"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="222"/>
<source>Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document.</source>
<translation>Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="230"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="229"/>
<source>Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down.</source>
<translation>Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="209"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="208"/>
<source>Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left.</source>
<translation>Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="210"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="209"/>
<source>Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation.</source>
<translation>Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="213"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="212"/>
<source>Embed the bookmarks you created in your document. These are useful for navigating long PDF documents.</source>
<translation>Embed the bookmarks you created in your document. These are useful for navigating long PDF documents.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="214"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="213"/>
<source>Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos.</source>
<translation>Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="216"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="215"/>
<source>Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size.</source>
<translation>Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="252"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="251"/>
<source>Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations.</source>
<translation>Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="262"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="261"/>
<source>This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems.</source>
<translation>This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems.</translation>
</message>
38014,7 → 37865,7
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="1104"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="522"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="521"/>
<source>No Script</source>
<translation>No Script</translation>
</message>
38041,22 → 37892,22
when PDF document is opened:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="224"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="223"/>
<source>Enables presentation effects when using Adobe&amp;#174; Reader&amp;#174; and other PDF viewers which support this in full screen mode.</source>
<translation>Enables presentation effects when using Adobe&amp;#174; Reader&amp;#174; and other PDF viewers which support this in full screen mode.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="261"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="260"/>
<source>Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Choose Grayscale when you want a grey scale PDF.</source>
<translation>Colour model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 colour CMYK printer. Choose Greyscale when you want a grey scale PDF.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="205"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="204"/>
<source>Do not show objects outside the margins in the exported file</source>
<translation>Do not show objects outside the margins in the exported file</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="229"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="228"/>
<source>Length of time the page is shown before the presentation starts on the selected page. Setting 0 will disable automatic page transition.</source>
<translation>Length of time the page is shown before the presentation starts on the selected page. Setting 0 will disable automatic page transition.</translation>
</message>
38131,22 → 37982,22
<translation>Pre-Press</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="217"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="216"/>
<source>Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options.</source>
<translation>Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colours. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="218"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="217"/>
<source>Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Even with Maximum selected, there is always some quality loss with jpeg.</source>
<translation>Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Even with Maximum selected, there is always some quality loss with jpeg.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="703"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="702"/>
<source>Inside:</source>
<translation>Inside:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="704"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="703"/>
<source>Outside:</source>
<translation>Outside:</translation>
</message>
38166,92 → 38017,92
<translation>Maximum Image Resolution:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="238"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="237"/>
<source>Show the document in single page mode</source>
<translation>Show the document in single page mode</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="239"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="238"/>
<source>Show the document in single page mode with the pages displayed continuously end to end like a scroll</source>
<translation>Show the document in single page mode with the pages displayed continuously end to end like a scroll</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="240"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="239"/>
<source>Show the document with facing pages, starting with the first page displayed on the left</source>
<translation>Show the document with facing pages, starting with the first page displayed on the left</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="241"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="240"/>
<source>Show the document with facing pages, starting with the first page displayed on the right</source>
<translation>Show the document with facing pages, starting with the first page displayed on the right</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="242"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="241"/>
<source>Use the viewer&apos;s defaults or the user&apos;s preferences if set differently from the viewer defaults</source>
<translation>Use the viewer&apos;s defaults or the user&apos;s preferences if set differently from the viewer defaults</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="243"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="242"/>
<source>Enables viewing the document in full screen</source>
<translation>Enables viewing the document in full screen</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="244"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="243"/>
<source>Display the bookmarks upon opening</source>
<translation>Display the bookmarks upon opening</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="245"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="244"/>
<source>Display the page thumbnails upon opening</source>
<translation>Display the page thumbnails upon opening</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="246"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="245"/>
<source>Forces the displaying of layers. Useful only for PDF 1.5+.</source>
<translation>Forces the displaying of layers. Useful only for PDF 1.5+.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="247"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="246"/>
<source>Hides the Tool Bar which has selection and other editing capabilities</source>
<translation>Hides the Tool Bar which has selection and other editing capabilities</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="219"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="218"/>
<source>Limits the resolution of your bitmap images to the selected DPI. Images with a lower resolution will be left untouched. Leaving this unchecked will render them at their native resolution. Enabling this will increase memory usage and slow down export.</source>
<translation>Limits the resolution of your bitmap images to the selected DPI. Images with a lower resolution will be left untouched. Leaving this unchecked will render them at their native resolution. Enabling this will increase memory usage and slow down export.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="273"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="272"/>
<source>Creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing</source>
<translation>Creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="274"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="273"/>
<source>This creates bleed marks which are indicated by _ . _ and show the bleed limit</source>
<translation>This creates bleed marks which are indicated by _ . _ and show the bleed limit</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="275"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="274"/>
<source>Add registration marks to each separation</source>
<translation>Add registration marks to each separation</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="276"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="275"/>
<source>Add color calibration bars</source>
<translation>Add colour calibration bars</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="277"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="276"/>
<source>Add document information which includes the document title and page numbers</source>
<translation>Add document information which includes the document title and page numbers</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="279"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="278"/>
<source>Indicate the distance offset for the registration marks</source>
<translation>Indicate the distance offset for the registration marks</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="284"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="283"/>
<source>Use the existing bleed settings from the document preferences</source>
<translation>Use the existing bleed settings from the document preferences</translation>
</message>
38272,41 → 38123,41
<translation>&amp;Apply Effect on all Pages</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="198"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="197"/>
<source>Automatically rotate the exported pages</source>
<translation>Automatically rotate the exported pages</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="208"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="207"/>
<source>Determines the PDF compatibility.&lt;br/&gt;The default is &lt;b&gt;PDF 1.3&lt;/b&gt; which gives the widest compatibility.&lt;br/&gt;Choose &lt;b&gt;PDF 1.4&lt;/b&gt; if your file uses features such as transparency or you require 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colors strictly specified in CMYK or spot colors.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</source>
<translation>Determines the PDF compatibility.&lt;br/&gt;The default is &lt;b&gt;PDF 1.3&lt;/b&gt; which gives the widest compatibility.&lt;br/&gt;Choose &lt;b&gt;PDF 1.4&lt;/b&gt; if your file uses features such as transparency or you require 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colours strictly specified in CMYK or spot colours.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want colour managed RGB for commercial printing and is selectable when you have activated colour management. Use only when advised by your printer or in some cases printing to a 4 colour digital colour laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="215"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="214"/>
<source>Export PDFs in image frames as embedded PDFs. This does *not* yet take care of colorspaces, so you should know what you are doing before setting this to &apos;true&apos;.</source>
<translation>Export PDFs in image frames as embedded PDFs. This does *not* yet take care of colourspaces, so you should know what you are doing before setting this to &apos;true&apos;.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="680"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="876"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="679"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="875"/>
<source>Push</source>
<translation>Push</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="681"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="877"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="680"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="876"/>
<source>Cover</source>
<translation>Cover</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="682"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="878"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="681"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="877"/>
<source>Uncover</source>
<translation>Uncover</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="683"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="879"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="682"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="878"/>
<source>Fade</source>
<translation>Fade</translation>
</message>
38332,7 → 38183,7
<translation>Length:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="278"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="277"/>
<source>Indicate the size of crops&apos;marks</source>
<translation>Indicate the size of crops&apos;marks</translation>
</message>
38342,12 → 38193,12
<translation>Image Quality Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="253"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="252"/>
<source>Choose an owner password which enables or disables all the security features in your exported PDF</source>
<translation>Choose an owner password which enables or disables all the security features in your exported PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="204"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="203"/>
<source>Create a range of pages</source>
<translation>Create a range of pages</translation>
</message>
38392,52 → 38243,52
<translation>&amp;Subset all</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="225"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="224"/>
<source>Embed only subset fonts with glyphs used in the document into the PDF.</source>
<translation>Embed only subset fonts with glyphs used in the document into the PDF.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="201"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="200"/>
<source>Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number</source>
<translation>Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="211"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="210"/>
<source>Generate PDF Articles, which is useful for navigating linked articles in a PDF</source>
<translation>Generate PDF Articles, which is useful for navigating linked articles in a PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="212"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="211"/>
<source>Layers in your document are exported to the PDF. Only available if PDF 1.5 is chosen.</source>
<translation>Layers in your document are exported to the PDF. Only available if PDF 1.5 is chosen.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="220"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="219"/>
<source>DPI (Dots Per Inch) for image export</source>
<translation>DPI (Dots Per Inch) for image export</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="254"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="253"/>
<source>Choose a password for users to be able to read your PDF</source>
<translation>Choose a password for users to be able to read your PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="256"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="255"/>
<source>Allow modifying of the PDF. If unchecked, modifying the PDF is prevented.</source>
<translation>Allow modifying of the PDF. If unchecked, modifying the PDF is prevented.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="248"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="247"/>
<source>Hides the Menu Bar for the viewer, the PDF will display in a plain window</source>
<translation>Hides the Menu Bar for the viewer, the PDF will display in a plain window</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="249"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="248"/>
<source>Fit the document page or pages to the available space in the viewer window</source>
<translation>Fit the document page or pages to the available space in the viewer window</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="255"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="254"/>
<source>Allow printing of the PDF. If unchecked, printing is prevented.</source>
<translation>Allow printing of the PDF. If unchecked, printing is prevented.</translation>
</message>
38605,75 → 38456,6
</message>
</context>
<context>
<name>Test_XYZBase</name>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="20"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="20"/>
<source>X, Y, Z</source>
<translation>X, Y, Z</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="53"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="53"/>
<source>Name:</source>
<translation>Name:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="106"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="116"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="129"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="139"/>
<source>W:</source>
<translation>W:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="152"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="162"/>
<source>Lock</source>
<translation>Lock</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="171"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="181"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="194"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="204"/>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="222"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="232"/>
<source>Flip:</source>
<translation>Flip:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="267"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="277"/>
<source>Lock:</source>
<translation>Lock:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="335"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="345"/>
<source>Rotation:</source>
<translation>Rotation:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="361"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="371"/>
<source>Level:</source>
<translation>Level:</translation>
</message>
</context>
<context>
<name>TextPalette</name>
<message>
<location filename="../../scribus/ui/textpalette.cpp" line="351"/>
40510,99 → 40292,6
</message>
</context>
<context>
<name>XYZ</name>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="20"/>
<location filename="../../scribus/ui/xyz3.ui" line="20"/>
<location filename="../../scribus/ui/xyz4.ui" line="20"/>
<location filename="../../scribus/ui/xyz5.ui" line="20"/>
<source>X, Y, Z</source>
<translation>X, Y, Z</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="41"/>
<location filename="../../scribus/ui/xyz3.ui" line="41"/>
<location filename="../../scribus/ui/xyz4.ui" line="70"/>
<location filename="../../scribus/ui/xyz5.ui" line="53"/>
<source>Name:</source>
<translation>Name:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="67"/>
<location filename="../../scribus/ui/xyz3.ui" line="365"/>
<location filename="../../scribus/ui/xyz4.ui" line="103"/>
<source>Position [X,Y]:</source>
<translation>Position [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="173"/>
<location filename="../../scribus/ui/xyz3.ui" line="310"/>
<location filename="../../scribus/ui/xyz4.ui" line="156"/>
<source>Size [W,H]:</source>
<translation>Size [W,H]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="241"/>
<location filename="../../scribus/ui/xyz3.ui" line="352"/>
<location filename="../../scribus/ui/xyz4.ui" line="366"/>
<location filename="../../scribus/ui/xyz5.ui" line="335"/>
<source>Rotation:</source>
<translation>Rotation:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="303"/>
<location filename="../../scribus/ui/xyz3.ui" line="372"/>
<location filename="../../scribus/ui/xyz4.ui" line="412"/>
<location filename="../../scribus/ui/xyz5.ui" line="361"/>
<source>Level:</source>
<translation>Level:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="386"/>
<source>99</source>
<translation>99</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz3.ui" line="145"/>
<location filename="../../scribus/ui/xyz4.ui" line="216"/>
<location filename="../../scribus/ui/xyz5.ui" line="222"/>
<source>Flip:</source>
<translation>Flip:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz3.ui" line="197"/>
<location filename="../../scribus/ui/xyz4.ui" line="285"/>
<location filename="../../scribus/ui/xyz5.ui" line="267"/>
<source>Lock:</source>
<translation>Lock:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="106"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="129"/>
<source>W:</source>
<translation>W:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="152"/>
<source>Lock</source>
<translation>Lock</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="171"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="194"/>
<source>H:</source>
<translation>H:</translation>
</message>
</context>
<context>
<name>XarPlug</name>
<message>
<location filename="../../scribus/plugins/import/xar/importxar.cpp" line="247"/>