Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 24080 → Rev 24081

/trunk/Scribus/resources/translations/scribus.en_AU.ts
439,12 → 439,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<source>PDF...</source>
<translation type="unfinished"></translation>
<translation>PDF...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<source>PostScript...</source>
<translation type="unfinished"></translation>
<translation>PostScript...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
1292,7 → 1292,7
<message>
<location filename="../../scribus/actionmanager.cpp" line="1851"/>
<source>Narrow No-Break Space</source>
<translation type="unfinished"></translation>
<translation>Narrow No-Break Space</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1857"/>
1791,12 → 1791,12
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>Content Properties</source>
<translation type="unfinished"></translation>
<translation>Content Properties</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1767"/>
<source>Scribus &amp;Help...</source>
<translation type="unfinished"></translation>
<translation>Scribus &amp;Help...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1783"/>
4048,7 → 4048,7
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="184"/>
<source>RGB %1</source>
<translation type="unfinished"></translation>
<translation>RGB %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_eyedropper.cpp" line="188"/>
4089,7 → 4089,7
<message>
<location filename="../../scribus/canvasmode_framelinks.cpp" line="294"/>
<source>Frame is already linked. Unlink it before linking it to another frame.</source>
<translation type="unfinished"></translation>
<translation>Frame is already linked. Unlink it before linking it to another frame.</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_framelinks.cpp" line="301"/>
4222,7 → 4222,7
<message>
<location filename="../../scribus/ui/charselect.cpp" line="299"/>
<source>Error reading file %1 - file is probably corrupted.</source>
<translation type="unfinished"></translation>
<translation>Error reading file %1 - file is probably corrupted.</translation>
</message>
<message>
<location filename="../../scribus/ui/charselect.cpp" line="328"/>
4922,7 → 4922,7
<location filename="../../scribus/ui/cpalette.cpp" line="1917"/>
<location filename="../../scribus/ui/cpalette.cpp" line="1922"/>
<source>Solid</source>
<translation type="unfinished">Solid</translation>
<translation>Solid</translation>
</message>
<message>
<location filename="../../scribus/ui/cpalette.cpp" line="76"/>
4930,30 → 4930,30
<location filename="../../scribus/ui/cpalette.cpp" line="1918"/>
<location filename="../../scribus/ui/cpalette.cpp" line="1923"/>
<source>Gradient</source>
<translation type="unfinished">Gradient</translation>
<translation>Gradient</translation>
</message>
<message>
<location filename="../../scribus/ui/cpalette.cpp" line="77"/>
<location filename="../../scribus/ui/cpalette.cpp" line="1919"/>
<source>Hatch</source>
<translation type="unfinished">Hatch</translation>
<translation>Hatch</translation>
</message>
<message>
<location filename="../../scribus/ui/cpalette.cpp" line="427"/>
<location filename="../../scribus/ui/cpalette.cpp" line="429"/>
<source>Pattern</source>
<translation type="unfinished">Pattern</translation>
<translation>Pattern</translation>
</message>
<message>
<location filename="../../scribus/ui/cpalette.cpp" line="701"/>
<location filename="../../scribus/ui/cpalette.cpp" line="704"/>
<source>Custom</source>
<translation type="unfinished">Custom</translation>
<translation>Custom</translation>
</message>
<message>
<location filename="../../scribus/ui/cpalette.cpp" line="1330"/>
<source>Create Mesh</source>
<translation type="unfinished">Create Mesh</translation>
<translation>Create Mesh</translation>
</message>
</context>
<context>
5899,12 → 5899,12
<message>
<location filename="../../scribus/commonstrings.cpp" line="437"/>
<source>File</source>
<translation type="unfinished">File</translation>
<translation>File</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="441"/>
<source>PDF</source>
<translation type="unfinished">PDF</translation>
<translation>PDF</translation>
</message>
<message>
<location filename="../../scribus/commonstrings.cpp" line="451"/>
6075,32 → 6075,32
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="331"/>
<source>Content Properties</source>
<translation type="unfinished"></translation>
<translation>Content Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="334"/>
<source>Group Properties</source>
<translation type="unfinished"></translation>
<translation>Group Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="337"/>
<source>Image Properties</source>
<translation type="unfinished"></translation>
<translation>Image Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="340"/>
<source>Page Properties</source>
<translation type="unfinished"></translation>
<translation>Page Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="343"/>
<source>Table Properties</source>
<translation type="unfinished"></translation>
<translation>Table Properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette.cpp" line="346"/>
<source>Text Properties</source>
<translation type="unfinished">Text Properties</translation>
<translation>Text Properties</translation>
</message>
</context>
<context>
6108,17 → 6108,17
<message>
<location filename="../../scribus/ui/contentpalette_default.cpp" line="137"/>
<source>&lt;html&gt;&lt;body&gt;&lt;p&gt;Open a document&lt;/p&gt;&lt;p&gt;and select an item to see its properties&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
<translation>&lt;html&gt;&lt;body&gt;&lt;p&gt;Open a document&lt;/p&gt;&lt;p&gt;and select an item to see its properties&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette_default.cpp" line="143"/>
<source>Select a single item to see its properties</source>
<translation type="unfinished"></translation>
<translation>Select a single item to see its properties</translation>
</message>
<message>
<location filename="../../scribus/ui/contentpalette_default.cpp" line="145"/>
<source>Select an item to see its properties</source>
<translation type="unfinished"></translation>
<translation>Select an item to see its properties</translation>
</message>
</context>
<context>
6126,7 → 6126,7
<message>
<location filename="../../scribus/ui/contentpalette_defaultbase.ui" line="35"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p align=&quot;center&quot;&gt;Open a document&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;and select an item to see its properties&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p align=&quot;center&quot;&gt;Open a document&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;and select an item to see its properties&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
</context>
<context>
6134,7 → 6134,7
<message>
<location filename="../../scribus/ui/contentpalette_pagebase.ui" line="35"/>
<source>Select an item to see its properties.</source>
<translation type="unfinished"></translation>
<translation>Select an item to see its properties.</translation>
</message>
</context>
<context>
11697,23 → 11697,23
<context>
<name>Mark2Mark</name>
<message>
<location filename="../../scribus/ui/mark2mark.cpp" line="15"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="16"/>
<source>Anchors</source>
<translation>Anchors</translation>
</message>
<message>
<location filename="../../scribus/ui/mark2mark.cpp" line="27"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="71"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="29"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="75"/>
<source>Mark to Mark</source>
<translation>Mark to Mark</translation>
</message>
<message>
<location filename="../../scribus/ui/mark2mark.cpp" line="38"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="41"/>
<source>Mark to Item</source>
<translation>Mark to Item</translation>
</message>
<message>
<location filename="../../scribus/ui/mark2mark.cpp" line="49"/>
<location filename="../../scribus/ui/mark2mark.cpp" line="53"/>
<source>Note mark</source>
<translation>Note mark</translation>
</message>
11972,7 → 11972,7
<message>
<location filename="../../scribus/ui/mergedoc.cpp" line="62"/>
<source>&amp;Import Master Page:</source>
<translation type="unfinished"></translation>
<translation>&amp;Import Master Page:</translation>
</message>
<message>
<location filename="../../scribus/ui/mergedoc.cpp" line="82"/>
12311,37 → 12311,37
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="355"/>
<source>By &amp;Page</source>
<translation type="unfinished"></translation>
<translation>By &amp;Page</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="363"/>
<source>&amp;Following Pages</source>
<translation type="unfinished"></translation>
<translation>&amp;Following Pages</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="373"/>
<source>Following &amp;Even Pages</source>
<translation type="unfinished"></translation>
<translation>Following &amp;Even Pages</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="383"/>
<source>Following &amp;Odd Pages</source>
<translation type="unfinished"></translation>
<translation>Following &amp;Odd Pages</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="393"/>
<source>Ran&amp;ge of Pages:</source>
<translation type="unfinished"></translation>
<translation>Ran&amp;ge of Pages:</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="408"/>
<source>...</source>
<translation type="unfinished">...</translation>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="421"/>
<source>&amp;Link Text Frames</source>
<translation type="unfinished"></translation>
<translation>&amp;Link Text Frames</translation>
</message>
<message>
<location filename="../../scribus/ui/multipleduplicate.ui" line="465"/>
12382,177 → 12382,177
<location filename="../../scribus/ui/newdocdialog.cpp" line="673"/>
<location filename="../../scribus/ui/newdocdialog.cpp" line="681"/>
<source>New Document</source>
<translation type="unfinished">New Document</translation>
<translation>New Document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="113"/>
<source>&amp;New Document</source>
<translation type="unfinished">&amp;New Document</translation>
<translation>&amp;New Document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="116"/>
<source>New &amp;from Template</source>
<translation type="unfinished">New &amp;from Template</translation>
<translation>New &amp;from Template</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="118"/>
<source>Open &amp;Existing Document</source>
<translation type="unfinished">Open &amp;Existing Document</translation>
<translation>Open &amp;Existing Document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="121"/>
<source>Open Recent &amp;Document</source>
<translation type="unfinished">Open Recent &amp;Document</translation>
<translation>Open Recent &amp;Document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="132"/>
<source>Do not show this dialog again</source>
<translation type="unfinished">Do not show this dialogue again</translation>
<translation>Do not show this dialogue again</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="146"/>
<source>Document page size, either a standard size or a custom size</source>
<translation type="unfinished">Document page size, either a standard size or a custom size</translation>
<translation>Document page size, either a standard size or a custom size</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="147"/>
<source>Orientation of the document&apos;s pages</source>
<translation type="unfinished">Orientation of the document&apos;s pages</translation>
<translation>Orientation of the document&apos;s pages</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="148"/>
<source>Width of the document&apos;s pages, editable if you have chosen a custom page size</source>
<translation type="unfinished">Width of the document&apos;s pages, editable if you have chosen a custom page size</translation>
<translation>Width of the document&apos;s pages, editable if you have chosen a custom page size</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="149"/>
<source>Height of the document&apos;s pages, editable if you have chosen a custom page size</source>
<translation type="unfinished">Height of the document&apos;s pages, editable if you have chosen a custom page size</translation>
<translation>Height of the document&apos;s pages, editable if you have chosen a custom page size</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="150"/>
<source>Initial number of pages of the document</source>
<translation type="unfinished">Initial number of pages of the document</translation>
<translation>Initial number of pages of the document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="151"/>
<source>Default unit of measurement for document editing</source>
<translation type="unfinished">Default unit of measurement for document editing</translation>
<translation>Default unit of measurement for document editing</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="152"/>
<source>Create text frames automatically when new pages are added</source>
<translation type="unfinished">Create text frames automatically when new pages are added</translation>
<translation>Create text frames automatically when new pages are added</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="153"/>
<source>Number of columns to create in automatically created text frames</source>
<translation type="unfinished">Number of columns to create in automatically created text frames</translation>
<translation>Number of columns to create in automatically created text frames</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="154"/>
<source>Distance between automatically created columns</source>
<translation type="unfinished">Distance between automatically created columns</translation>
<translation>Distance between automatically created columns</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="181"/>
<source>Document Layout</source>
<translation type="unfinished">Document Layout</translation>
<translation>Document Layout</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="218"/>
<source>&amp;Size:</source>
<translation type="unfinished">&amp;Size:</translation>
<translation>&amp;Size:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="227"/>
<source>Orie&amp;ntation:</source>
<translation type="unfinished">Orie&amp;ntation:</translation>
<translation>Orie&amp;ntation:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="230"/>
<source>Portrait</source>
<translation type="unfinished">Portrait</translation>
<translation>Portrait</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="231"/>
<source>Landscape</source>
<translation type="unfinished">Landscape</translation>
<translation>Landscape</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="237"/>
<source>&amp;Width:</source>
<translation type="unfinished">&amp;Width:</translation>
<translation>&amp;Width:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="243"/>
<source>&amp;Height:</source>
<translation type="unfinished">&amp;Height:</translation>
<translation>&amp;Height:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="250"/>
<source>&amp;Default Unit:</source>
<translation type="unfinished">&amp;Default Unit:</translation>
<translation>&amp;Default Unit:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="260"/>
<source>Margin Guides</source>
<translation type="unfinished">Margin Guides</translation>
<translation>Margin Guides</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="276"/>
<source>Options</source>
<translation type="unfinished">Options</translation>
<translation>Options</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="281"/>
<source>N&amp;umber of Pages:</source>
<translation type="unfinished">N&amp;umber of Pages:</translation>
<translation>N&amp;umber of Pages:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="291"/>
<source>First Page is:</source>
<translation type="unfinished">First Page is:</translation>
<translation>First Page is:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="304"/>
<source>&amp;Automatic Text Frames</source>
<translation type="unfinished">&amp;Automatic Text Frames</translation>
<translation>&amp;Automatic Text Frames</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="307"/>
<source>Colu&amp;mns:</source>
<translation type="unfinished">Colu&amp;mns:</translation>
<translation>Colu&amp;mns:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="316"/>
<source>&amp;Gap:</source>
<translation type="unfinished">&amp;Gap:</translation>
<translation>&amp;Gap:</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="330"/>
<source>Show Document Settings After Creation</source>
<translation type="unfinished">Show Document Settings After Creation</translation>
<translation>Show Document Settings After Creation</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="373"/>
<source>Open</source>
<translation type="unfinished">Open</translation>
<translation>Open</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="675"/>
<source>New from Template</source>
<translation type="unfinished">New from Template</translation>
<translation>New from Template</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="677"/>
<source>Open Existing Document</source>
<translation type="unfinished">Open Existing Document</translation>
<translation>Open Existing Document</translation>
</message>
<message>
<location filename="../../scribus/ui/newdocdialog.cpp" line="679"/>
<source>Open Recent Document</source>
<translation type="unfinished">Open Recent Document</translation>
<translation>Open Recent Document</translation>
</message>
</context>
<context>
13635,62 → 13635,62
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="14"/>
<source>Dialog</source>
<translation type="unfinished"></translation>
<translation>Dialog</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="85"/>
<source>Scaling:</source>
<translation type="unfinished">Scaling:</translation>
<translation>Scaling:</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="98"/>
<source>Resize the scale of the page</source>
<translation type="unfinished">Resize the scale of the page</translation>
<translation>Resize the scale of the page</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="102"/>
<source>50%</source>
<translation type="unfinished">50%</translation>
<translation>50%</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="107"/>
<source>100%</source>
<translation type="unfinished">100%</translation>
<translation>100%</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="112"/>
<source>150%</source>
<translation type="unfinished">150%</translation>
<translation>150%</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="117"/>
<source>200%</source>
<translation type="unfinished">200%</translation>
<translation>200%</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="122"/>
<source>Fit to Width</source>
<translation type="unfinished">Fit to Width</translation>
<translation>Fit to Width</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="127"/>
<source>Fit to Height</source>
<translation type="unfinished">Fit to Height</translation>
<translation>Fit to Height</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="132"/>
<source>Fit to Page</source>
<translation type="unfinished">Fit to Page</translation>
<translation>Fit to Page</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="179"/>
<source>Close</source>
<translation type="unfinished">Close</translation>
<translation>Close</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreviewbase.ui" line="189"/>
<source>Export...</source>
<translation type="unfinished">Export...</translation>
<translation>Export...</translation>
</message>
</context>
<context>
13698,132 → 13698,132
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="20"/>
<source>Form</source>
<translation type="unfinished"></translation>
<translation>Form</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="38"/>
<source>Preview Settings</source>
<translation type="unfinished">Preview Settings</translation>
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="51"/>
<source>Screen / Web</source>
<translation type="unfinished">Screen / Web</translation>
<translation>Screen / Web</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="56"/>
<source>Printer</source>
<translation type="unfinished">Printer</translation>
<translation>Printer</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="61"/>
<source>Grayscale</source>
<translation type="unfinished">Greyscale</translation>
<translation>Greyscale</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="69"/>
<source>Mirror Page(s) Horizontally</source>
<translation type="unfinished">Mirror Page(s) Horizontally</translation>
<translation>Mirror Page(s) Horizontally</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="76"/>
<source>Mirror Pages(s) Vertically</source>
<translation type="unfinished"></translation>
<translation>Mirror Pages(s) Vertically</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="83"/>
<source>Clip to Printer Margins</source>
<translation type="unfinished">Clip to Printer Margins</translation>
<translation>Clip to Printer Margins</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="90"/>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation type="unfinished">Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled.</translation>
<translation>Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled.</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="93"/>
<source>Convert Spot Colors</source>
<translation type="unfinished">Convert Spot Colours</translation>
<translation>Convert Spot Colours</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="103"/>
<source>Display Settings</source>
<translation type="unfinished">Display Settings</translation>
<translation>Display Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="124"/>
<source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
<translation type="unfinished">Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</translation>
<translation>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="127"/>
<source>Enable &amp;Antialiasing</source>
<translation type="unfinished">Enable &amp;Antialiasing</translation>
<translation>Enable &amp;Antialiasing</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="134"/>
<source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</source>
<translation type="unfinished">Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</translation>
<translation>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="137"/>
<source>Display Trans&amp;parency</source>
<translation type="unfinished">Display Trans&amp;parency</translation>
<translation>Display Trans&amp;parency</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="144"/>
<source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
<translation type="unfinished">Gives a print preview using simulations of generic CMYK inks, instead of RGB colours</translation>
<translation>Gives a print preview using simulations of generic CMYK inks, instead of RGB colours</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="147"/>
<source>&amp;Display CMYK</source>
<translation type="unfinished">&amp;Display CMYK</translation>
<translation>&amp;Display CMYK</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="176"/>
<source>Display Ink Coverage</source>
<translation type="unfinished">Display Ink Coverage</translation>
<translation>Display Ink Coverage</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.ui" line="188"/>
<source>Threshold:</source>
<translation type="unfinished">Threshold:</translation>
<translation>Threshold:</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="45"/>
<source>PDF Output Preview</source>
<translation type="unfinished"></translation>
<translation>PDF Output Preview</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="67"/>
<source>Separation Name</source>
<translation type="unfinished">Separation Name</translation>
<translation>Separation Name</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="79"/>
<source>Cyan</source>
<translation type="unfinished">Cyan</translation>
<translation>Cyan</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="87"/>
<source>Magenta</source>
<translation type="unfinished">Magenta</translation>
<translation>Magenta</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="95"/>
<source>Yellow</source>
<translation type="unfinished">Yellow</translation>
<translation>Yellow</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="103"/>
<source>Black</source>
<translation type="unfinished">Black</translation>
<translation>Black</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_pdf.cpp" line="128"/>
<source> %</source>
<translation type="unfinished"> %</translation>
<translation> %</translation>
</message>
</context>
<context>
13831,137 → 13831,137
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="20"/>
<source>Form</source>
<translation type="unfinished"></translation>
<translation>Form</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="38"/>
<source>Preview Settings</source>
<translation type="unfinished">Preview Settings</translation>
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="51"/>
<source>Color</source>
<translation type="unfinished">Colour</translation>
<translation>Colour</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="56"/>
<source>Grayscale</source>
<translation type="unfinished">Greyscale</translation>
<translation>Greyscale</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="64"/>
<source>Mirror Page(s) Horizontally</source>
<translation type="unfinished">Mirror Page(s) Horizontally</translation>
<translation>Mirror Page(s) Horizontally</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="71"/>
<source>Mirror Pages(s) Vertically</source>
<translation type="unfinished"></translation>
<translation>Mirror Pages(s) Vertically</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="78"/>
<source>Clip to Printer Margins</source>
<translation type="unfinished">Clip to Printer Margins</translation>
<translation>Clip to Printer Margins</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="85"/>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation type="unfinished">Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled.</translation>
<translation>Enables Spot Colours to be converted to composite colours. Unless you are planning to print spot colours at a commercial printer, this is probably best left enabled.</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="88"/>
<source>Convert Spot Colors</source>
<translation type="unfinished">Convert Spot Colours</translation>
<translation>Convert Spot Colours</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="95"/>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
<translation type="unfinished">A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</translation>
<translation>A way of switching off some of the grey shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the grey. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="98"/>
<source>&amp;Under Color Removal</source>
<translation type="unfinished">&amp;Under Colour Removal</translation>
<translation>&amp;Under Colour Removal</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="108"/>
<source>Display Settings</source>
<translation type="unfinished">Display Settings</translation>
<translation>Display Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="129"/>
<source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
<translation type="unfinished">Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</translation>
<translation>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="132"/>
<source>Enable &amp;Antialiasing</source>
<translation type="unfinished">Enable &amp;Antialiasing</translation>
<translation>Enable &amp;Antialiasing</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="139"/>
<source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</source>
<translation type="unfinished">Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</translation>
<translation>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="142"/>
<source>Display Trans&amp;parency</source>
<translation type="unfinished">Display Trans&amp;parency</translation>
<translation>Display Trans&amp;parency</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="149"/>
<source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
<translation type="unfinished">Gives a print preview using simulations of generic CMYK inks, instead of RGB colours</translation>
<translation>Gives a print preview using simulations of generic CMYK inks, instead of RGB colours</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="152"/>
<source>&amp;Display CMYK</source>
<translation type="unfinished">&amp;Display CMYK</translation>
<translation>&amp;Display CMYK</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="181"/>
<source>Display Ink Coverage</source>
<translation type="unfinished">Display Ink Coverage</translation>
<translation>Display Ink Coverage</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.ui" line="193"/>
<source>Threshold:</source>
<translation type="unfinished">Threshold:</translation>
<translation>Threshold:</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="48"/>
<source>PostScript Output Preview</source>
<translation type="unfinished"></translation>
<translation>PostScript Output Preview</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="74"/>
<source>Separation Name</source>
<translation type="unfinished">Separation Name</translation>
<translation>Separation Name</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="86"/>
<source>Cyan</source>
<translation type="unfinished">Cyan</translation>
<translation>Cyan</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="94"/>
<source>Magenta</source>
<translation type="unfinished">Magenta</translation>
<translation>Magenta</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="102"/>
<source>Yellow</source>
<translation type="unfinished">Yellow</translation>
<translation>Yellow</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="110"/>
<source>Black</source>
<translation type="unfinished">Black</translation>
<translation>Black</translation>
</message>
<message>
<location filename="../../scribus/ui/outputpreview_ps.cpp" line="135"/>
<source> %</source>
<translation type="unfinished"> %</translation>
<translation> %</translation>
</message>
</context>
<context>
14140,7 → 14140,7
<message>
<location filename="../../scribus/pslib.cpp" line="524"/>
<source>Failed to open file for writing : %1</source>
<translation type="unfinished"></translation>
<translation>Failed to open file for writing : %1</translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1580"/>
14795,12 → 14795,12
<message>
<location filename="../../scribus/ui/pagepalette_pages.cpp" line="165"/>
<source>Delete Page?</source>
<translation type="unfinished">Delete Page?</translation>
<translation>Delete Page?</translation>
</message>
<message>
<location filename="../../scribus/ui/pagepalette_pages.cpp" line="166"/>
<source>Are you sure you want to delete this page?</source>
<translation type="unfinished">Are you sure you want to delete this page?</translation>
<translation>Are you sure you want to delete this page?</translation>
</message>
</context>
<context>
15642,7 → 15642,7
<message>
<location filename="../../scribus/ui/pdfversionmodel.cpp" line="49"/>
<source>PDF 1.6 (Acrobat 7)</source>
<translation type="unfinished">PDF 1.5 (Acrobat 6) {1.6 ?} {7)?}</translation>
<translation>PDF 1.6 (Acrobat 6)</translation>
</message>
<message>
<location filename="../../scribus/ui/pdfversionmodel.cpp" line="51"/>
15773,17 → 15773,17
<message>
<location filename="../../scribus/ui/picsearch.ui" line="211"/>
<source>Apply to all &amp;matching images</source>
<translation type="unfinished"></translation>
<translation>Apply to all &amp;matching images</translation>
</message>
<message>
<location filename="../../scribus/ui/picsearch.ui" line="214"/>
<source>Alt+M</source>
<translation type="unfinished">Alt+M</translation>
<translation>Alt+M</translation>
</message>
<message>
<location filename="../../scribus/ui/picsearch.ui" line="230"/>
<source>Since you selected an image with a broken link, only image frames with invalid links will be modified.</source>
<translation type="unfinished"></translation>
<translation>Since you selected an image with a broken link, only image frames with invalid links will be modified.</translation>
</message>
<message>
<location filename="../../scribus/ui/picsearch.ui" line="258"/>
15817,7 → 15817,7
<message>
<location filename="../../scribus/ui/picsearchoptions.cpp" line="92"/>
<source>Select a base directory to search for </source>
<translation type="unfinished"></translation>
<translation>Select a base directory to search for </translation>
</message>
<message>
<location filename="../../scribus/ui/picsearchoptions.cpp" line="104"/>
17946,7 → 17946,7
<message>
<location filename="../../scribus/ui/prefs_documentsections.cpp" line="26"/>
<source>Sections</source>
<translation type="unfinished">Sections</translation>
<translation>Sections</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_documentsections.cpp" line="178"/>
18406,7 → 18406,7
<message>
<location filename="../../scribus/ui/prefs_externaltoolsbase.ui" line="262"/>
<source>&lt;qt&gt;File system location for graphics editor&lt;/qt&gt;</source>
<translation type="unfinished"></translation>
<translation>&lt;qt&gt;File system location for graphics editor&lt;/qt&gt;</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_externaltoolsbase.ui" line="303"/>
18950,7 → 18950,7
<message>
<location filename="../../scribus/ui/prefs_hyphenator.cpp" line="33"/>
<source>Hyphenator</source>
<translation type="unfinished">Hyphenator</translation>
<translation>Hyphenator</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_hyphenator.cpp" line="91"/>
20135,7 → 20135,7
<message>
<location filename="../../scribus/ui/prefs_pdfexport.cpp" line="60"/>
<source>Determines the PDF compatibility.&lt;br/&gt;&lt;b&gt;PDF 1.3&lt;/b&gt;, which is the earliest supported version, gives the widest compatibility with printers&apos; RIPS.&lt;br/&gt;&lt;b&gt;PDF 1.4&lt;/b&gt;, which is the default version, supports features such as transparency and 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colors strictly specified in CMYK or spot colors.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</source>
<translation type="unfinished"></translation>
<translation>Determines the PDF compatibility.&lt;br/&gt;&lt;b&gt;PDF 1.3&lt;/b&gt;, which is the earliest supported version, gives the widest compatibility with printers&apos; RIPS.&lt;br/&gt;&lt;b&gt;PDF 1.4&lt;/b&gt;, which is the default version, supports features such as transparency and 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colours strictly specified in CMYK or spot colours.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want colour managed RGB for commercial printing and is selectable when you have activated colour management. Use only when advised by your printer or in some cases printing to a 4 colour digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_pdfexport.cpp" line="61"/>
21101,7 → 21101,7
<message>
<location filename="../../scribus/ui/prefs_printerbase.ui" line="357"/>
<source>Printing Language</source>
<translation type="unfinished"></translation>
<translation>Printing Language</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_printerbase.ui" line="420"/>
21141,7 → 21141,7
<message>
<location filename="../../scribus/ui/prefs_printer.cpp" line="22"/>
<source>Printer</source>
<translation type="unfinished">Printer</translation>
<translation>Printer</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_printer.cpp" line="32"/>
21157,7 → 21157,8
<location filename="../../scribus/ui/prefs_printer.cpp" line="34"/>
<source>Sets the printing language to use.
Setting to Postscript Level 1 or 2 can create huge files.</source>
<translation type="unfinished"></translation>
<translation>Sets the printing language to use.
Setting to Postscript Level 1 or 2 can create huge files.</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_printer.cpp" line="35"/>
21505,7 → 21506,7
<message>
<location filename="../../scribus/ui/prefs_tableofcontents.cpp" line="25"/>
<source>Tables of Contents</source>
<translation type="unfinished">Tables of Contents</translation>
<translation>Tables of Contents</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_tableofcontents.cpp" line="90"/>
21708,12 → 21709,12
<message>
<location filename="../../scribus/ui/prefs_userinterfacebase.ui" line="150"/>
<source>Language and Regionalization</source>
<translation type="unfinished"></translation>
<translation>Language and Regionalisation</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterfacebase.ui" line="179"/>
<source>Number Format:</source>
<translation type="unfinished"></translation>
<translation>Number Format:</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterfacebase.ui" line="216"/>
21799,7 → 21800,7
<message>
<location filename="../../scribus/ui/prefs_userinterface.cpp" line="68"/>
<source>Use either the system or selected language related definition for number formats for decimals for numbers in the interface</source>
<translation type="unfinished"></translation>
<translation>Use either the system or selected language related definition for number formats for decimals for numbers in the interface</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterface.cpp" line="69"/>
21848,12 → 21849,12
<message>
<location filename="../../scribus/ui/prefs_userinterface.cpp" line="51"/>
<source>Use System Format</source>
<translation type="unfinished"></translation>
<translation>Use System Format</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterface.cpp" line="52"/>
<source>Use Interface Language Format</source>
<translation type="unfinished"></translation>
<translation>Use Interface Language Format</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterface.cpp" line="72"/>
21963,7 → 21964,7
<message>
<location filename="../../scribus/ui/printdialog.cpp" line="445"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation type="unfinished">PDF Files (*.pdf);;All Files (*)</translation>
<translation>PDF Files (*.pdf);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/ui/printdialog.cpp" line="446"/>
22366,132 → 22367,132
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="14"/>
<source>Dialog</source>
<translation type="unfinished"></translation>
<translation>Dialog</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="83"/>
<source>Preview Settings</source>
<translation type="unfinished">Preview Settings</translation>
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="108"/>
<source>Color</source>
<translation type="unfinished">Colour</translation>
<translation>Colour</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="113"/>
<source>Grayscale</source>
<translation type="unfinished">Greyscale</translation>
<translation>Greyscale</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="121"/>
<source>Mirror Page(s) Horizontally</source>
<translation type="unfinished">Mirror Page(s) Horizontally</translation>
<translation>Mirror Page(s) Horizontally</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="128"/>
<source>Mirror Pages(s) Vertically</source>
<translation type="unfinished"></translation>
<translation>Mirror Pages(s) Vertically</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="135"/>
<source>Clip to Printer Margins</source>
<translation type="unfinished">Clip to Printer Margins</translation>
<translation>Clip to Printer Margins</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="142"/>
<source>Convert Spot Colors</source>
<translation type="unfinished">Convert Spot Colours</translation>
<translation>Convert Spot Colours</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="149"/>
<source>&amp;Under Color Removal</source>
<translation type="unfinished">&amp;Under Colour Removal</translation>
<translation>&amp;Under Colour Removal</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="159"/>
<source>Display Settings</source>
<translation type="unfinished">Display Settings</translation>
<translation>Display Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="180"/>
<source>Enable &amp;Antialiasing</source>
<translation type="unfinished">Enable &amp;Antialiasing</translation>
<translation>Enable &amp;Antialiasing</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="187"/>
<source>Display Trans&amp;parency</source>
<translation type="unfinished">Display Trans&amp;parency</translation>
<translation>Display Trans&amp;parency</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="194"/>
<source>&amp;Display CMYK</source>
<translation type="unfinished">&amp;Display CMYK</translation>
<translation>&amp;Display CMYK</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="220"/>
<source>Display Ink Coverage</source>
<translation type="unfinished">Display Ink Coverage</translation>
<translation>Display Ink Coverage</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="229"/>
<source>Threshold:</source>
<translation type="unfinished">Threshold:</translation>
<translation>Threshold:</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="279"/>
<source>Scaling:</source>
<translation type="unfinished">Scaling:</translation>
<translation>Scaling:</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="292"/>
<source>Resize the scale of the page</source>
<translation type="unfinished">Resize the scale of the page</translation>
<translation>Resize the scale of the page</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="296"/>
<source>50%</source>
<translation type="unfinished">50%</translation>
<translation>50%</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="301"/>
<source>100%</source>
<translation type="unfinished">100%</translation>
<translation>100%</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="306"/>
<source>150%</source>
<translation type="unfinished">150%</translation>
<translation>150%</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="311"/>
<source>200%</source>
<translation type="unfinished">200%</translation>
<translation>200%</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="316"/>
<source>Fit to Width</source>
<translation type="unfinished">Fit to Width</translation>
<translation>Fit to Width</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="321"/>
<source>Fit to Height</source>
<translation type="unfinished">Fit to Height</translation>
<translation>Fit to Height</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="326"/>
<source>Fit to Page</source>
<translation type="unfinished">Fit to Page</translation>
<translation>Fit to Page</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="373"/>
<source>Close</source>
<translation type="unfinished">Close</translation>
<translation>Close</translation>
</message>
<message>
<location filename="../../scribus/ui/printpreviewbase.ui" line="383"/>
<source>Print...</source>
<translation type="unfinished">Print...</translation>
<translation>Print...</translation>
</message>
</context>
<context>
23356,7 → 23357,7
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="160"/>
<source>Text flow around contour line</source>
<translation type="unfinished"></translation>
<translation>Text flow around contour line</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="285"/>
23376,22 → 23377,22
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="37"/>
<source>Shape:</source>
<translation type="unfinished"></translation>
<translation>Shape:</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="126"/>
<source>Text flow around bounding box</source>
<translation type="unfinished"></translation>
<translation>Text flow around bounding box</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="92"/>
<source>Text flow around frame shape</source>
<translation type="unfinished"></translation>
<translation>Text flow around frame shape</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="58"/>
<source>Text flow around frame disabled</source>
<translation type="unfinished"></translation>
<translation>Text flow around frame disabled</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="163"/>
23401,7 → 23402,7
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="194"/>
<source>Text flow around image clip path</source>
<translation type="unfinished"></translation>
<translation>Text flow around image clip path</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="197"/>
23411,22 → 23412,22
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="294"/>
<source>Text Flow:</source>
<translation type="unfinished"></translation>
<translation>Text Flow:</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="301"/>
<source>Fill Rule:</source>
<translation type="unfinished"></translation>
<translation>Fill Rule:</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="310"/>
<source>Any path self-intersections or subpaths create holes in the fill (fill-rule: evenodd)</source>
<translation type="unfinished"></translation>
<translation>Any path self-intersections or subpaths create holes in the fill (fill-rule: evenodd)</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_shapebase.ui" line="329"/>
<source>Fill is solid unless a subpath is counterdirectional (fill-rule: nonzero)</source>
<translation type="unfinished"></translation>
<translation>Fill is solid unless a subpath is counterdirectional (fill-rule: nonzero)</translation>
</message>
</context>
<context>
23556,7 → 23557,7
<message>
<location filename="../../scribus/ui/propertiespalette_text.cpp" line="707"/>
<source>remove direct paragraph formatting</source>
<translation type="unfinished">remove direct paragraph formatting</translation>
<translation>remove direct paragraph formatting</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_text.cpp" line="756"/>
27050,7 → 27051,7
<message>
<location filename="../../scribus/langmgr.cpp" line="570"/>
<source>Spanish (Generic)</source>
<translation type="unfinished"></translation>
<translation>Spanish (Generic)</translation>
</message>
<message>
<location filename="../../scribus/langmgr.cpp" line="573"/>
28614,13 → 28615,13
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="342"/>
<source>Cannot get linked frames of non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot get linked frames of non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="364"/>
<source>Cannot get first line offset of non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot get first line offset of non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="382"/>
28939,13 → 28940,13
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="586"/>
<source>Cannot layout text of a non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot layout text of a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="606"/>
<source>Cannot layout text chain for a non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot layout text chain for a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="637"/>
28999,13 → 29000,13
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="810"/>
<source>First line offset out of bounds, Use one of the scribus.FLOP_* constants.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>First line offset out of bounds, Use one of the scribus.FLOP_* constants.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="818"/>
<source>Cannot set first line offset on a non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot set first line offset on a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="837"/>
29078,7 → 29079,7
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="1021"/>
<source>Count must be positive, 0 or -1</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Count must be positive, 0 or -1</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.cpp" line="1106"/>
29435,7 → 29436,7
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="607"/>
<source>Cannot get character style of a non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot get character style of a non-text frame.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="647"/>
30495,19 → 30496,19
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="66"/>
<source>hasdropcap is true but dropcaplines value is invalid</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>hasdropcap is true but dropcaplines value is invalid</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="72"/>
<source>hasdropcap and bullet are not allowed to be specified together.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>hasdropcap and bullet are not allowed to be specified together.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="126"/>
<source>invalid tab-position specified.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>invalid tab-position specified.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="218"/>
30860,7 → 30861,7
<location filename="../../scribus/plugins/scriptplugin/cmdcell.cpp" line="30"/>
<source>Cannot get cell text on a non-table item.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
<translation>Cannot get cell text on a non-table item.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcell.cpp" line="99"/>
31560,7 → 31561,7
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdannotations.cpp" line="115"/>
<source>Action must be 0-9 </source>
<translation type="unfinished"></translation>
<translation>Action must be 0-9 </translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdannotations.cpp" line="346"/>
34777,7 → 34778,7
<message>
<location filename="../../scribus/ui/scmwmenumanager.cpp" line="45"/>
<source>&amp;Output Preview</source>
<translation type="unfinished"></translation>
<translation>&amp;Output Preview</translation>
</message>
<message>
<location filename="../../scribus/ui/scmwmenumanager.cpp" line="49"/>
35152,7 → 35153,7
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13463"/>
<source>Copied %1 items on %2 pages</source>
<translation type="unfinished"></translation>
<translation>Copied %1 items on %2 pages</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="14709"/>
35616,7 → 35617,7
<message>
<location filename="../../scribus/scribus.cpp" line="913"/>
<source>&amp;Output Preview</source>
<translation type="unfinished"></translation>
<translation>&amp;Output Preview</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="969"/>
35651,7 → 35652,7
<message>
<location filename="../../scribus/scribus.cpp" line="1010"/>
<source>P&amp;DF Options</source>
<translation type="unfinished"></translation>
<translation>P&amp;DF Options</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1024"/>
35718,7 → 35719,7
<message>
<location filename="../../scribus/scribus.cpp" line="3321"/>
<source>This document is already open. It will be set as the active document.</source>
<translation type="unfinished"></translation>
<translation>This document is already open. It will be set as the active document.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5123"/>
35728,7 → 35729,7
<message>
<location filename="../../scribus/scribus.cpp" line="5123"/>
<source>Save as</source>
<translation type="unfinished">Save as</translation>
<translation>Save as</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6188"/>
36197,7 → 36198,7
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="147"/>
<source>Embedded Python scripting support for Python 3.x.</source>
<translation type="unfinished"></translation>
<translation>Embedded Python scripting support for Python 3.x.</translation>
</message>
</context>
<context>
38015,7 → 38016,7
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="206"/>
<source>Determines the PDF compatibility.&lt;br/&gt;&lt;b&gt;PDF 1.3&lt;/b&gt;, which is the earliest supported version, gives the widest compatibility with printers&apos; RIPS.&lt;br/&gt;&lt;b&gt;PDF 1.4&lt;/b&gt;, which is the default version, supports features such as transparency and 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colors strictly specified in CMYK or spot colors.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</source>
<translation type="unfinished"></translation>
<translation>Determines the PDF compatibility.&lt;br/&gt;&lt;b&gt;PDF 1.3&lt;/b&gt;, which is the earliest supported version, gives the widest compatibility with printers&apos; RIPS.&lt;br/&gt;&lt;b&gt;PDF 1.4&lt;/b&gt;, which is the default version, supports features such as transparency and 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colours strictly specified in CMYK or spot colours.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want colour managed RGB for commercial printing and is selectable when you have activated colour management. Use only when advised by your printer or in some cases printing to a 4 colour digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="261"/>
38977,7 → 38978,7
<message>
<location filename="../../scribus/ui/transparencypalette.cpp" line="236"/>
<source>Custom</source>
<translation type="unfinished">Custom</translation>
<translation>Custom</translation>
</message>
</context>
<context>
40415,7 → 40416,7
<message>
<location filename="../../scribus/upgradechecker.cpp" line="221"/>
<source>If you have installed Scribus from a package management system, for example on a Linux-based operating system, your package manager may have this upgrade available.</source>
<translation type="unfinished"></translation>
<translation>If you have installed Scribus from a package management system, for example on a Linux-based operating system, your package manager may have this upgrade available.</translation>
</message>
<message>
<location filename="../../scribus/upgradechecker.cpp" line="243"/>