Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 24101 → Rev 24102

/trunk/Scribus/resources/translations/scribus.en_AU.ts
15490,7 → 15490,7
<message>
<location filename="../../scribus/ui/patternpropsdialog.cpp" line="194"/>
<source>X-Skew:</source>
<translation></translation>
<translation>X-Skew:</translation>
</message>
<message>
<location filename="../../scribus/ui/patternpropsdialog.cpp" line="195"/>
17720,7 → 17720,7
<message>
<location filename="../../scribus/ui/prefs_documentinformationbase.ui" line="78"/>
<source>Subject:</source>
<translation></translation>
<translation>Subject:</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_documentinformationbase.ui" line="88"/>
18697,7 → 18697,7
<location filename="../../scribus/ui/prefs_guidesbase.ui" line="38"/>
<location filename="../../scribus/ui/prefs_guidesbase.ui" line="50"/>
<source>Placement</source>
<translation></translation>
<translation>Placement</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_guidesbase.ui" line="155"/>
19756,7 → 19756,7
<message>
<location filename="../../scribus/ui/prefs_pdfexportbase.ui" line="363"/>
<source>Compression</source>
<translation></translation>
<translation>Compression</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_pdfexportbase.ui" line="377"/>
21222,7 → 21222,7
<message>
<location filename="../../scribus/ui/prefs_scrapbook.cpp" line="29"/>
<source>The minimum number is 1; the maximum is 100</source>
<translation></translation>
<translation>The minimum number is 1; the maximum is 100</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_scrapbook.cpp" line="26"/>
21426,7 → 21426,7
<message>
<location filename="../../scribus/ui/prefs_tableofcontentsbase.ui" line="27"/>
<source>Table of Contents</source>
<translation></translation>
<translation>Table of Contents</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_tableofcontentsbase.ui" line="64"/>
21719,7 → 21719,7
<message>
<location filename="../../scribus/ui/prefs_userinterfacebase.ui" line="216"/>
<source>Font Sizes</source>
<translation></translation>
<translation>Font Sizes</translation>
</message>
<message>
<location filename="../../scribus/ui/prefs_userinterfacebase.ui" line="232"/>
22538,7 → 22538,7
<message>
<location filename="../../scribus/ui/propertiespalette_groupbase.ui" line="38"/>
<source>Group clips Contents</source>
<translation></translation>
<translation>Group clips Contents</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette_groupbase.ui" line="35"/>
28669,7 → 28669,7
<translation>Unit out of range. Use one of the scribus.UNIT_* constants.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="31"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="29"/>
<source>Target is not an image frame.</source>
<comment>python error</comment>
<translation>Target is not an image frame.</translation>
28848,19 → 28848,19
<translation>Colour not found in default colours.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="434"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="432"/>
<source>Cannot scale by 0%.</source>
<comment>python error</comment>
<translation>Cannot scale by 0%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="51"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="93"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="136"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="180"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="208"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="543"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="570"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="49"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="91"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="134"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="178"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="206"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="541"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="568"/>
<source>Specified item not an image frame.</source>
<comment>python error</comment>
<translation>Specified item not an image frame.</translation>
29739,19 → 29739,19
<translation>Scribus crashes due to Signal #%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="360"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="358"/>
<source>Need selection or argument list of items to group</source>
<comment>python error</comment>
<translation>Need selection or argument list of items to group</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="392"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="390"/>
<source>Cannot group less than two items</source>
<comment>python error</comment>
<translation>Cannot group less than two items</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="644"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="642"/>
<source>Selection must contain only shapes or bezier curves.</source>
<comment>python error</comment>
<translation>Selection must contain only shapes or bezier curves.</translation>
29851,7 → 29851,7
<message>
<location filename="../../scribus/scfonts.cpp" line="665"/>
<source>Font is broken: &quot;%1&quot;</source>
<translation></translation>
<translation>Font is broken: &quot;%1&quot;</translation>
</message>
<message>
<location filename="../../scribus/scfonts.cpp" line="667"/>
29905,7 → 29905,7
<translation>Searching for Fonts</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3988"/>
<location filename="../../scribus/scribus.cpp" line="3987"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</translation>
</message>
31793,12 → 31793,12
<translation>(recovered)</translation>
</message>
<message>
<location filename="../../scribus/ui/recoverdialog.cpp" line="146"/>
<location filename="../../scribus/ui/recoverdialog.cpp" line="149"/>
<source>Emergency</source>
<translation>Emergency</translation>
</message>
<message>
<location filename="../../scribus/ui/recoverdialog.cpp" line="158"/>
<location filename="../../scribus/ui/recoverdialog.cpp" line="161"/>
<source>Autosave</source>
<translation>Autosave</translation>
</message>
32003,7 → 32003,7
<message>
<location filename="../../scribus/ui/rotationsetter.ui" line="42"/>
<source>+90</source>
<translation></translation>
<translation>+90</translation>
</message>
</context>
<context>
35241,12 → 35241,12
<message>
<location filename="../../scribus/scribus.cpp" line="2042"/>
<location filename="../../scribus/scribus.cpp" line="2082"/>
<location filename="../../scribus/scribus.cpp" line="3646"/>
<location filename="../../scribus/scribus.cpp" line="4093"/>
<location filename="../../scribus/scribus.cpp" line="4167"/>
<location filename="../../scribus/scribus.cpp" line="4322"/>
<location filename="../../scribus/scribus.cpp" line="6595"/>
<location filename="../../scribus/scribus.cpp" line="8619"/>
<location filename="../../scribus/scribus.cpp" line="3645"/>
<location filename="../../scribus/scribus.cpp" line="4092"/>
<location filename="../../scribus/scribus.cpp" line="4166"/>
<location filename="../../scribus/scribus.cpp" line="4321"/>
<location filename="../../scribus/scribus.cpp" line="6594"/>
<location filename="../../scribus/scribus.cpp" line="8618"/>
<source>Ready</source>
<translation>Ready</translation>
</message>
35253,7 → 35253,7
<message>
<location filename="../../scribus/scribus.cpp" line="3000"/>
<location filename="../../scribus/scribus.cpp" line="3115"/>
<location filename="../../scribus/scribus.cpp" line="3737"/>
<location filename="../../scribus/scribus.cpp" line="3736"/>
<source>Open</source>
<translation>Open</translation>
</message>
35295,31 → 35295,31
<translation>Loading...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3543"/>
<location filename="../../scribus/scribus.cpp" line="3542"/>
<source> was replaced by: </source>
<translation> was replaced by: </translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3573"/>
<location filename="../../scribus/scribus.cpp" line="3572"/>
<source>(converted)</source>
<translation>(converted)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3928"/>
<location filename="../../scribus/scribus.cpp" line="3927"/>
<source>Filename and Path for Image</source>
<translation>Filename and Path for Image</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3928"/>
<location filename="../../scribus/scribus.cpp" line="3927"/>
<source>All Files (*)</source>
<translation>All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4023"/>
<location filename="../../scribus/scribus.cpp" line="4088"/>
<location filename="../../scribus/scribus.cpp" line="7065"/>
<location filename="../../scribus/scribus.cpp" line="7223"/>
<location filename="../../scribus/scribus.cpp" line="7237"/>
<location filename="../../scribus/scribus.cpp" line="4022"/>
<location filename="../../scribus/scribus.cpp" line="4087"/>
<location filename="../../scribus/scribus.cpp" line="7064"/>
<location filename="../../scribus/scribus.cpp" line="7222"/>
<location filename="../../scribus/scribus.cpp" line="7236"/>
<source>Cannot write the file:
%1</source>
<translation>Cannot write the file:
35326,26 → 35326,26
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4073"/>
<location filename="../../scribus/scribus.cpp" line="7054"/>
<location filename="../../scribus/scribus.cpp" line="4072"/>
<location filename="../../scribus/scribus.cpp" line="7053"/>
<source>Save As</source>
<translation>Save As</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4102"/>
<location filename="../../scribus/scribus.cpp" line="4101"/>
<source>Saving...</source>
<translation>Saving...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4230"/>
<location filename="../../scribus/scribus.cpp" line="6735"/>
<location filename="../../scribus/scribus.cpp" line="6812"/>
<location filename="../../scribus/scribus.cpp" line="6884"/>
<location filename="../../scribus/scribus.cpp" line="4229"/>
<location filename="../../scribus/scribus.cpp" line="6734"/>
<location filename="../../scribus/scribus.cpp" line="6811"/>
<location filename="../../scribus/scribus.cpp" line="6883"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4265"/>
<location filename="../../scribus/scribus.cpp" line="4264"/>
<source>Printing...</source>
<translation>Printing...</translation>
</message>
35352,50 → 35352,50
<message>
<location filename="../../scribus/scribus.cpp" line="1196"/>
<location filename="../../scribus/scribus.cpp" line="2111"/>
<location filename="../../scribus/scribus.cpp" line="4269"/>
<location filename="../../scribus/scribus.cpp" line="7033"/>
<location filename="../../scribus/scribus.cpp" line="8354"/>
<location filename="../../scribus/scribus.cpp" line="4268"/>
<location filename="../../scribus/scribus.cpp" line="7032"/>
<location filename="../../scribus/scribus.cpp" line="8353"/>
<source>Document</source>
<translation>Document</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4310"/>
<location filename="../../scribus/scribus.cpp" line="4309"/>
<source>Printing failed!</source>
<translation>Printing failed!</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4400"/>
<location filename="../../scribus/scribus.cpp" line="4399"/>
<source>Cannot Cut In-Use Item</source>
<translation>Cannot Cut In-Use Item</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4400"/>
<location filename="../../scribus/scribus.cpp" line="4399"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5038"/>
<location filename="../../scribus/scribus.cpp" line="5037"/>
<source>About Qt</source>
<translation>About Qt</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5069"/>
<location filename="../../scribus/scribus.cpp" line="5068"/>
<source>Scribus Manual</source>
<translation>Scribus Manual</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6175"/>
<location filename="../../scribus/scribus.cpp" line="6174"/>
<source>&amp;Size:</source>
<translation>&amp;Size:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1523"/>
<location filename="../../scribus/scribus.cpp" line="6175"/>
<location filename="../../scribus/scribus.cpp" line="6174"/>
<source>Size</source>
<translation>Size</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6581"/>
<location filename="../../scribus/scribus.cpp" line="6580"/>
<source>An error occurred while opening monitor profile.
Former monitor profile will be used.</source>
<translation>An error occurred while opening monitor profile.
35402,7 → 35402,7
Former monitor profile will be used.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7000"/>
<location filename="../../scribus/scribus.cpp" line="6999"/>
<source>Scribus detected some errors.
Consider using the Preflight Verifier to correct them.</source>
<translation>Scribus detected some errors.
35409,7 → 35409,7
Consider using the Preflight Verifier to correct them.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7096"/>
<location filename="../../scribus/scribus.cpp" line="7095"/>
<source>Detected some errors.
Consider using the Preflight Verifier to correct them</source>
<translation>Detected some errors.
35416,33 → 35416,33
Consider using the Preflight Verifier to correct them</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7219"/>
<location filename="../../scribus/scribus.cpp" line="7218"/>
<source>-Page%1</source>
<translation>-Page%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7754"/>
<location filename="../../scribus/scribus.cpp" line="7753"/>
<source>Some objects are locked.</source>
<translation>Some objects are locked.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7750"/>
<location filename="../../scribus/scribus.cpp" line="7749"/>
<source>&amp;Lock All</source>
<translation>&amp;Lock All</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7251"/>
<location filename="../../scribus/scribus.cpp" line="7250"/>
<source>Locate your PDF viewer</source>
<translation>Locate your PDF viewer</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7751"/>
<location filename="../../scribus/scribus.cpp" line="7750"/>
<source>&amp;Unlock All</source>
<translation>&amp;Unlock All</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3847"/>
<location filename="../../scribus/scribus.cpp" line="8818"/>
<location filename="../../scribus/scribus.cpp" line="3846"/>
<location filename="../../scribus/scribus.cpp" line="8817"/>
<source>Do you really want to replace your existing image?</source>
<translation>Do you really want to replace your existing image?</translation>
</message>
35472,22 → 35472,22
<translation>Paste Recent</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4071"/>
<location filename="../../scribus/scribus.cpp" line="4070"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Documents (*.sla *.sla.gz);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3759"/>
<location filename="../../scribus/scribus.cpp" line="3758"/>
<source>Do you really want to clear all your text?</source>
<translation>Do you really want to clear all your text?</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3540"/>
<location filename="../../scribus/scribus.cpp" line="3539"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Some colour profiles used by this document are not installed:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7054"/>
<location filename="../../scribus/scribus.cpp" line="7053"/>
<source>%1;;All Files (*)</source>
<translation>%1;;All Files (*)</translation>
</message>
35497,19 → 35497,19
<translation>Applying User Shortcuts</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6617"/>
<location filename="../../scribus/scribus.cpp" line="6616"/>
<source>Updating Images</source>
<translation>Updating Images</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4021"/>
<location filename="../../scribus/scribus.cpp" line="4086"/>
<location filename="../../scribus/scribus.cpp" line="4020"/>
<location filename="../../scribus/scribus.cpp" line="4085"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>Your document was saved to a temporary file and could not be moved: %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4373"/>
<location filename="../../scribus/scribus.cpp" line="4372"/>
<source>Print engine initialization failed</source>
<translation>Print engine initialisation failed</translation>
</message>
35519,19 → 35519,19
<translation>All Supported Formats</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9095"/>
<location filename="../../scribus/scribus.cpp" line="9173"/>
<location filename="../../scribus/scribus.cpp" line="9094"/>
<location filename="../../scribus/scribus.cpp" line="9172"/>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9095"/>
<location filename="../../scribus/scribus.cpp" line="9173"/>
<location filename="../../scribus/scribus.cpp" line="9094"/>
<location filename="../../scribus/scribus.cpp" line="9172"/>
<source>New Entry</source>
<translation>New Entry</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6776"/>
<location filename="../../scribus/scribus.cpp" line="6775"/>
<source>Ghostscript is missing : PostScript Print Preview is not available</source>
<translation>Ghostscript is missing : PostScript Print Preview is not available</translation>
</message>
35546,7 → 35546,7
<translation>The file may be damaged or may have been produced in a later version of Scribus.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7517"/>
<location filename="../../scribus/scribus.cpp" line="7516"/>
<source>Editing Symbol: %1</source>
<translation>Editing Symbol: %1</translation>
</message>
35576,31 → 35576,31
<translation>Marks</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9517"/>
<location filename="../../scribus/scribus.cpp" line="9516"/>
<source>Insert new </source>
<translation>Insert new </translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9544"/>
<location filename="../../scribus/scribus.cpp" line="9773"/>
<location filename="../../scribus/scribus.cpp" line="9543"/>
<location filename="../../scribus/scribus.cpp" line="9772"/>
<source>Anchor mark</source>
<translation>Anchor mark</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9552"/>
<location filename="../../scribus/scribus.cpp" line="9786"/>
<location filename="../../scribus/scribus.cpp" line="9551"/>
<location filename="../../scribus/scribus.cpp" line="9785"/>
<source>Mark with &lt;%1&gt; variable text</source>
<translation>Mark with &lt;%1&gt; variable text</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9560"/>
<location filename="../../scribus/scribus.cpp" line="9824"/>
<location filename="../../scribus/scribus.cpp" line="9559"/>
<location filename="../../scribus/scribus.cpp" line="9823"/>
<source>Mark to %1 item</source>
<translation>Mark to %1 item</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9570"/>
<location filename="../../scribus/scribus.cpp" line="9845"/>
<location filename="../../scribus/scribus.cpp" line="9569"/>
<location filename="../../scribus/scribus.cpp" line="9844"/>
<source>Mark to %1 mark</source>
<translation>Mark to %1 mark</translation>
</message>
35706,13 → 35706,13
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1392"/>
<location filename="../../scribus/scribus.cpp" line="8615"/>
<location filename="../../scribus/scribus.cpp" line="8614"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1394"/>
<location filename="../../scribus/scribus.cpp" line="8616"/>
<location filename="../../scribus/scribus.cpp" line="8615"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
35722,67 → 35722,67
<translation>This document is already open. It will be set as the active document.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5123"/>
<location filename="../../scribus/scribus.cpp" line="5122"/>
<source>Text Files (*.txt);;All Files (*)</source>
<translation>Text Files (*.txt);;All Files (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5123"/>
<location filename="../../scribus/scribus.cpp" line="5122"/>
<source>Save as</source>
<translation>Save as</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6188"/>
<location filename="../../scribus/scribus.cpp" line="6187"/>
<source>&amp;Language:</source>
<translation>&amp;Language:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6188"/>
<location filename="../../scribus/scribus.cpp" line="6187"/>
<source>Language</source>
<translation>Language</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="7568"/>
<location filename="../../scribus/scribus.cpp" line="7567"/>
<source>Editing Inline Item</source>
<translation>Editing Inline Item</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8465"/>
<location filename="../../scribus/scribus.cpp" line="8464"/>
<source>The program %1 is missing or failed to open</source>
<translation>The program %1 is missing or failed to open</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8609"/>
<location filename="../../scribus/scribus.cpp" line="8608"/>
<source>Current zoom level</source>
<translation>Current zoom level</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8610"/>
<location filename="../../scribus/scribus.cpp" line="8609"/>
<source>Zoom to 100%</source>
<translation>Zoom to 100%</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8611"/>
<location filename="../../scribus/scribus.cpp" line="8610"/>
<source>Zoom out by the stepping value in Tools preferences</source>
<translation>Zoom out by the stepping value in Tools preferences</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8612"/>
<location filename="../../scribus/scribus.cpp" line="8611"/>
<source>Zoom in by the stepping value in Tools preferences</source>
<translation>Zoom in by the stepping value in Tools preferences</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8613"/>
<location filename="../../scribus/scribus.cpp" line="8612"/>
<source>Select the current layer</source>
<translation>Select the current layer</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="8614"/>
<location filename="../../scribus/scribus.cpp" line="8613"/>
<source>Select the current unit</source>
<translation>Select the current unit</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9755"/>
<location filename="../../scribus/scribus.cpp" line="9754"/>
<source>Edit %1</source>
<translation>Edit %1</translation>
</message>