Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 18405 → Rev 18406

<
/trunk/Scribus/resources/translations/scribus.en_GB.ts
0,0 → 1,43445
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="en_GB">
<context>
<name></name>
<message>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
</translation>
</message>
<message>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
Note : deprecated, use changeColorCMYK() instead.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
Note : deprecated, use changeColorCMYK() instead.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColorCMYK(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColorCMYK(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColorRGB(&quot;name&quot;, r, g, b)
 
Changes the color &quot;name&quot; to the specified RGB value. The color value is
defined via three components r = red, g = green, b = blue.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColorRGB(&quot;name&quot;, r, g, b)
 
Changes the colour &quot;name&quot; to the specified RGB value. The colour value is
defined via three components r = red, g = green, b = blue.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
Note : deprecated, use defineColorCMYK() instead.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
Note : deprecated, use defineColorCMYK() instead.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColorCMYK(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColorCMYK(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColorRGB(&quot;name&quot;, r, g, b)
 
Defines a new color &quot;name&quot;. The color Value is defined via three components:
r = red, g = green, b = blue. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColorRGB(&quot;name&quot;, r, g, b)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via three components:
r = red, g = green, b = blue. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the colour &quot;name&quot; is a spot colour.
See also setSpotColor()
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">setSpotColor(&quot;name&quot;, spot)
 
Set the colour &quot;name&quot; as a spot colour if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialogue box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<source>getDocName() -&gt; string
 
Returns the name the document was saved under.
If the document was not saved before the name is empty.
</source>
<translation type="obsolete">getDocName() -&gt; string
 
Returns the name the document was saved under.
If the document was not saved before the name is empty.
</translation>
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setBaseLine(grid, offset)
 
Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setBaseLine(grid, offset)
 
Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<source>getObjectType([&quot;name&quot;]) -&gt; string
 
Get type of object &quot;name&quot; as a string.
</source>
<translation type="obsolete">getObjectType([&quot;name&quot;]) -&gt; string
 
Get type of object &quot;name&quot; as a string.
</translation>
</message>
<message>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<source>groupObjects(list) -&gt; string
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used. Returns the group name for further referencing.
</source>
<translation type="obsolete">groupObjects(list) -&gt; string
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used. Returns the group name for further referencing.
</translation>
</message>
<message>
<source>setImageBrightness(n [, &quot;name&quot;])
 
Set image brightness effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Brightness factor is equal to the value shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageBrightness(n [, &quot;name&quot;])
 
Set image brightness effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Brightness factor is equal to the value shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageGrayscale([&quot;name&quot;])
 
Set image grayscale effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageGrayscale([&quot;name&quot;])
 
Set image greyscale effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageOffset(x, y [, &quot;name&quot;])
 
Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on
properties palette when point unit is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageOffset(x, y [, &quot;name&quot;])
 
Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on
properties palette when point unit is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="obsolete">setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="obsolete">textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="obsolete">getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="obsolete">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="obsolete">setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation type="obsolete">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="obsolete">messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="obsolete">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<source>placeVectorFile(&quot;filename&quot;, x, y)
 
Places the Vectorgrapics &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the graphic placed on the page
 
If loading was successful, the selection contains the imported grapic
</source>
<translation type="obsolete">placeVectorFile(&quot;filename&quot;, x, y)
 
Places the Vectorgrapics &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the graphic placed on the page
 
If loading was successful, the selection contains the imported grapic
</translation>
</message>
<message>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
</translation>
</message>
<message>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="obsolete">setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="obsolete">setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="obsolete">messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialogue and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialogue.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="obsolete">textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="obsolete">getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialogue box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialogue
otherwise it acts like a &quot;File Open Dialogue&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="obsolete">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation type="obsolete">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="obsolete">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
Note : deprecated, use changeColorCMYK() instead.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
Note : deprecated, use changeColorCMYK() instead.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColorCMYK(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColorCMYK(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColorRGB(&quot;name&quot;, r, g, b)
 
Changes the color &quot;name&quot; to the specified RGB value. The color value is
defined via three components r = red, g = green, b = blue.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColorRGB(&quot;name&quot;, r, g, b)
 
Changes the colour &quot;name&quot; to the specified RGB value. The colour value is
defined via three components r = red, g = green, b = blue.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
Note : deprecated, use defineColorCMYK() instead.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
Note : deprecated, use defineColorCMYK() instead.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColorCMYK(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColorCMYK(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>defineColorRGB(&quot;name&quot;, r, g, b)
 
Defines a new color &quot;name&quot;. The color Value is defined via three components:
r = red, g = green, b = blue. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColorRGB(&quot;name&quot;, r, g, b)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via three components:
r = red, g = green, b = blue. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the colour &quot;name&quot; is a spot colour.
See also setSpotColor()
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">setSpotColor(&quot;name&quot;, spot)
 
Set the colour &quot;name&quot; as a spot colour if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getDocName() -&gt; string
 
Returns the name the document was saved under.
If the document was not saved before the name is empty.
</source>
<translation type="obsolete">getDocName() -&gt; string
 
Returns the name the document was saved under.
If the document was not saved before the name is empty.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setBaseLine(grid, offset)
 
Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setBaseLine(grid, offset)
 
Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>groupObjects(list) -&gt; string
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used. Returns the group name for further referencing.
</source>
<translation type="obsolete">groupObjects(list) -&gt; string
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used. Returns the group name for further referencing.
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageOffset(x, y [, &quot;name&quot;])
 
Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on
properties palette when point unit is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageOffset(x, y [, &quot;name&quot;])
 
Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on
properties palette when point unit is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageBrightness(n [, &quot;name&quot;])
 
Set image brightness effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Brightness factor is equal to the value shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageBrightness(n [, &quot;name&quot;])
 
Set image brightness effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Brightness factor is equal to the value shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>setImageGrayscale([&quot;name&quot;])
 
Set image grayscale effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">setImageGrayscale([&quot;name&quot;])
 
Set image greyscale effect of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<source>Importing: %1</source>
<translation>Importing: %1</translation>
</message>
<message>
<source>Analyzing File:</source>
<translation>Analysing File:</translation>
</message>
<message>
<source>Group%1</source>
<translation>Group%1</translation>
</message>
<message>
<source>Generating Items</source>
<translation>Generating Items</translation>
</message>
</context>
<context>
<name>About</name>
<message>
<source>Contributions from:</source>
<translation>Contributions from:</translation>
</message>
<message>
<source>&amp;About</source>
<translation>&amp;About</translation>
</message>
<message>
<source>A&amp;uthors</source>
<translation>A&amp;uthors</translation>
</message>
<message>
<source>&amp;Translations</source>
<translation>&amp;Translations</translation>
</message>
<message>
<source>&amp;Online</source>
<translation>&amp;Online</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<source>Development Team:</source>
<translation>Development Team:</translation>
</message>
<message>
<source>Official Documentation:</source>
<translation>Official Documentation:</translation>
</message>
<message>
<source>Other Documentation:</source>
<translation>Other Documentation:</translation>
</message>
<message>
<source>Homepage</source>
<translation>Homepage</translation>
</message>
<message>
<source>Online Reference</source>
<translation>Online Reference</translation>
</message>
<message>
<source>Bugs and Feature Requests</source>
<translation>Bugs and Feature Requests</translation>
</message>
<message>
<source>Mailing List</source>
<translation>Mailing List</translation>
</message>
<message>
<source>Official Translations and Translators:</source>
<translation>Official Translations and Translators:</translation>
</message>
<message>
<source>Previous Translation Contributors:</source>
<translation>Previous Translation Contributors:</translation>
</message>
<message>
<source>About Scribus %1</source>
<translation>About Scribus %1</translation>
</message>
<message>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<source>Using Ghostscript version %1</source>
<translation>Using Ghostscript version %1</translation>
</message>
<message>
<source>No Ghostscript version available</source>
<translation>No Ghostscript version available</translation>
</message>
<message>
<source>Build ID:</source>
<translation>Build ID:</translation>
</message>
<message>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua Port:</translation>
</message>
<message>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; Port:</translation>
</message>
<message>
<source>Tango Project Icons:</source>
<translation>Tango Project Icons:</translation>
</message>
<message>
<source>&amp;Updates</source>
<translation>&amp;Updates</translation>
</message>
<message>
<source>Check for &amp;Updates</source>
<translation type="obsolete">Check for &amp;Updates</translation>
</message>
<message>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Check for updates to Scribus. No data from your machine will be transferred off it.</translation>
</message>
<message>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; Port:</translation>
</message>
<message>
<source>Splash Screen:</source>
<translation>Splash Screen:</translation>
</message>
<message>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>This panel shows the version, build date and compiled in library support in Scribus.</translation>
</message>
<message>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</translation>
</message>
<message>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</translation>
</message>
<message>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>The Windows version does not use fontconfig or CUPS libraries.</translation>
</message>
<message>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
</message>
<message>
<source>Scribus Version</source>
<translation>Scribus Version</translation>
</message>
<message>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<source>Abort Update Check</source>
<translation>Abort Update Check</translation>
</message>
<message>
<source>Developer Blog</source>
<translation>Developer Blog</translation>
</message>
<message>
<source>&amp;Licence</source>
<translation>&amp;Licence</translation>
</message>
<message>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</translation>
</message>
<message>
<source>Doc Translators:</source>
<translation>Doc Translators:</translation>
</message>
<message>
<source>Webmasters:</source>
<translation>Webmasters:</translation>
</message>
<message>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<source>Filename:</source>
<translation>Filename:</translation>
</message>
<message>
<source>Version:</source>
<translation>Version:</translation>
</message>
<message>
<source>Enabled:</source>
<translation>Enabled:</translation>
</message>
<message>
<source>Release Date:</source>
<translation>Release Date:</translation>
</message>
<message>
<source>Description:</source>
<translation>Description:</translation>
</message>
<message>
<source>Author(s):</source>
<translation>Author(s):</translation>
</message>
<message>
<source>Copyright:</source>
<translation>Copyright:</translation>
</message>
<message>
<source>License:</source>
<translation>License:</translation>
</message>
<message>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: About Plug-ins</translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<source>&amp;Image Effects</source>
<translation>&amp;Image Effects</translation>
</message>
<message>
<source>&amp;Tabulators...</source>
<translation>&amp;Tabulators...</translation>
</message>
<message>
<source>&amp;New</source>
<translation>&amp;New</translation>
</message>
<message>
<source>&amp;Open...</source>
<translation>&amp;Open...</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>&amp;Close</translation>
</message>
<message>
<source>&amp;Save</source>
<translation>&amp;Save</translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation>Save &amp;As...</translation>
</message>
<message>
<source>Re&amp;vert to Saved</source>
<translation>Re&amp;vert to Saved</translation>
</message>
<message>
<source>Collect for O&amp;utput...</source>
<translation>Collect for O&amp;utput...</translation>
</message>
<message>
<source>Get Text...</source>
<translation>Get Text...</translation>
</message>
<message>
<source>Append &amp;Text...</source>
<translation>Append &amp;Text...</translation>
</message>
<message>
<source>Get Image...</source>
<translation>Get Image...</translation>
</message>
<message>
<source>Save &amp;Text...</source>
<translation>Save &amp;Text...</translation>
</message>
<message>
<source>Save as P&amp;DF...</source>
<translation>Save as P&amp;DF...</translation>
</message>
<message>
<source>Document &amp;Setup...</source>
<translation>Document &amp;Setup...</translation>
</message>
<message>
<source>P&amp;references 150...</source>
<translation type="obsolete">P&amp;references 150...</translation>
</message>
<message>
<source>&amp;Print...</source>
<translation>&amp;Print...</translation>
</message>
<message>
<source>&amp;Quit</source>
<translation>&amp;Quit</translation>
</message>
<message>
<source>&amp;Undo</source>
<translation>&amp;Undo</translation>
</message>
<message>
<source>&amp;Redo</source>
<translation>&amp;Redo</translation>
</message>
<message>
<source>&amp;Item Action Mode</source>
<translation>&amp;Item Action Mode</translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation>Cu&amp;t</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>&amp;Copy</translation>
</message>
<message>
<source>&amp;Paste</source>
<translation>&amp;Paste</translation>
</message>
<message>
<source>Select &amp;All</source>
<translation>Select &amp;All</translation>
</message>
<message>
<source>&amp;Deselect All</source>
<translation>&amp;Deselect All</translation>
</message>
<message>
<source>&amp;Search/Replace...</source>
<translation>&amp;Search/Replace...</translation>
</message>
<message>
<source>C&amp;olors...</source>
<translation type="obsolete">C&amp;olours...</translation>
</message>
<message>
<source>Gradients...</source>
<translation type="obsolete">Gradients...</translation>
</message>
<message>
<source>&amp;Master Pages...</source>
<translation>&amp;Master Pages...</translation>
</message>
<message>
<source>P&amp;references...</source>
<translation>P&amp;references...</translation>
</message>
<message>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<source>&amp;Other...</source>
<translation>&amp;Other...</translation>
</message>
<message>
<source>&amp;Left</source>
<translation>&amp;Left</translation>
</message>
<message>
<source>&amp;Center</source>
<translation>&amp;Centre</translation>
</message>
<message>
<source>&amp;Right</source>
<translation>&amp;Right</translation>
</message>
<message>
<source>&amp;Block</source>
<translation>&amp;Block</translation>
</message>
<message>
<source>&amp;Forced</source>
<translation>&amp;Forced</translation>
</message>
<message>
<source>&amp;%1 %</source>
<translation type="obsolete">&amp;%1 %</translation>
</message>
<message>
<source>&amp;Normal</source>
<translation>&amp;Normal</translation>
</message>
<message>
<source>&amp;Underline</source>
<translation>&amp;Underline</translation>
</message>
<message>
<source>Underline &amp;Words</source>
<translation>Underline &amp;Words</translation>
</message>
<message>
<source>&amp;Strike Through</source>
<translation>&amp;Strike Through</translation>
</message>
<message>
<source>&amp;All Caps</source>
<translation>&amp;All Caps</translation>
</message>
<message>
<source>Small &amp;Caps</source>
<translation>Small &amp;Caps</translation>
</message>
<message>
<source>Su&amp;perscript</source>
<translation>Su&amp;perscript</translation>
</message>
<message>
<source>Su&amp;bscript</source>
<translation>Su&amp;bscript</translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation>D&amp;uplicate</translation>
</message>
<message>
<source>&amp;Multiple Duplicate</source>
<translation>&amp;Multiple Duplicate</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>&amp;Delete</translation>
</message>
<message>
<source>&amp;Group</source>
<translation>&amp;Group</translation>
</message>
<message>
<source>&amp;Ungroup</source>
<translation>&amp;Ungroup</translation>
</message>
<message>
<source>Is &amp;Locked</source>
<translation>Is &amp;Locked</translation>
</message>
<message>
<source>Si&amp;ze is Locked</source>
<translation>Si&amp;ze is Locked</translation>
</message>
<message>
<source>Lower to &amp;Bottom</source>
<translation>Lower to &amp;Bottom</translation>
</message>
<message>
<source>Raise to &amp;Top</source>
<translation>Raise to &amp;Top</translation>
</message>
<message>
<source>&amp;Lower</source>
<translation>&amp;Lower</translation>
</message>
<message>
<source>&amp;Raise</source>
<translation>&amp;Raise</translation>
</message>
<message>
<source>Send to S&amp;crapbook</source>
<translation type="obsolete">Send to S&amp;crapbook</translation>
</message>
<message>
<source>&amp;Attributes...</source>
<translation>&amp;Attributes...</translation>
</message>
<message>
<source>I&amp;mage Visible</source>
<translation>I&amp;mage Visible</translation>
</message>
<message>
<source>Embed Image</source>
<translation>Embed Image</translation>
</message>
<message>
<source>Is PDF &amp;Bookmark</source>
<translation>Is PDF &amp;Bookmark</translation>
</message>
<message>
<source>Is PDF A&amp;nnotation</source>
<translation>Is PDF A&amp;nnotation</translation>
</message>
<message>
<source>Annotation P&amp;roperties</source>
<translation>Annotation P&amp;roperties</translation>
</message>
<message>
<source>Field P&amp;roperties</source>
<translation>Field P&amp;roperties</translation>
</message>
<message>
<source>&amp;Edit Shape...</source>
<translation>&amp;Edit Shape...</translation>
</message>
<message>
<source>&amp;Attach Text to Path</source>
<translation>&amp;Attach Text to Path</translation>
</message>
<message>
<source>&amp;Detach Text from Path</source>
<translation>&amp;Detach Text from Path</translation>
</message>
<message>
<source>&amp;Combine Polygons</source>
<translation>&amp;Combine Polygons</translation>
</message>
<message>
<source>Split &amp;Polygons</source>
<translation>Split &amp;Polygons</translation>
</message>
<message>
<source>&amp;Bezier Curve</source>
<translation>&amp;Bezier Curve</translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation>&amp;Image Frame</translation>
</message>
<message>
<source>&amp;Polygon</source>
<translation>&amp;Polygon</translation>
</message>
<message>
<source>&amp;Text Frame</source>
<translation>&amp;Text Frame</translation>
</message>
<message>
<source>&amp;Glyph...</source>
<translation>&amp;Glyph...</translation>
</message>
<message>
<source>Sample Text</source>
<translation>Sample Text</translation>
</message>
<message>
<source>&amp;Insert...</source>
<translation>&amp;Insert...</translation>
</message>
<message>
<source>Im&amp;port...</source>
<translation>Im&amp;port...</translation>
</message>
<message>
<source>&amp;Delete...</source>
<translation>&amp;Delete...</translation>
</message>
<message>
<source>&amp;Copy...</source>
<translation>&amp;Copy...</translation>
</message>
<message>
<source>&amp;Move...</source>
<translation>&amp;Move...</translation>
</message>
<message>
<source>&amp;Apply Master Page...</source>
<translation>&amp;Apply Master Page...</translation>
</message>
<message>
<source>Manage &amp;Guides...</source>
<translation>Manage &amp;Guides...</translation>
</message>
<message>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<source>Show &amp;Margins</source>
<translation>Show &amp;Margins</translation>
</message>
<message>
<source>Show &amp;Frames</source>
<translation>Show &amp;Frames</translation>
</message>
<message>
<source>Show &amp;Images</source>
<translation>Show &amp;Images</translation>
</message>
<message>
<source>Show &amp;Grid</source>
<translation>Show &amp;Grid</translation>
</message>
<message>
<source>Show G&amp;uides</source>
<translation>Show G&amp;uides</translation>
</message>
<message>
<source>Show &amp;Baseline Grid</source>
<translation>Show &amp;Baseline Grid</translation>
</message>
<message>
<source>Show &amp;Text Chain</source>
<translation>Show &amp;Text Chain</translation>
</message>
<message>
<source>Sn&amp;ap to Grid</source>
<translation>Sn&amp;ap to Grid</translation>
</message>
<message>
<source>Sna&amp;p to Guides</source>
<translation>Sna&amp;p to Guides</translation>
</message>
<message>
<source>&amp;Properties</source>
<translation>&amp;Properties</translation>
</message>
<message>
<source>&amp;Scrapbook</source>
<translation>&amp;Scrapbook</translation>
</message>
<message>
<source>&amp;Layers</source>
<translation>&amp;Layers</translation>
</message>
<message>
<source>&amp;Bookmarks</source>
<translation>&amp;Bookmarks</translation>
</message>
<message>
<source>&amp;Measurements</source>
<translation>&amp;Measurements</translation>
</message>
<message>
<source>Action &amp;History</source>
<translation>Action &amp;History</translation>
</message>
<message>
<source>Preflight &amp;Verifier</source>
<translation>Preflight &amp;Verifier</translation>
</message>
<message>
<source>Symbols</source>
<translation>Symbols</translation>
</message>
<message>
<source>&amp;Tools</source>
<translation>&amp;Tools</translation>
</message>
<message>
<source>P&amp;DF Tools</source>
<translation>P&amp;DF Tools</translation>
</message>
<message>
<source>Select Item</source>
<translation>Select Item</translation>
</message>
<message>
<source>Rotate Item</source>
<translation>Rotate Item</translation>
</message>
<message>
<source>Zoom in or out</source>
<translation>Zoom in or out</translation>
</message>
<message>
<source>Zoom in</source>
<translation>Zoom in</translation>
</message>
<message>
<source>Zoom out</source>
<translation>Zoom out</translation>
</message>
<message>
<source>Edit Contents of Frame</source>
<translation>Edit Contents of Frame</translation>
</message>
<message>
<source>Link Text Frames</source>
<translation>Link Text Frames</translation>
</message>
<message>
<source>Unlink Text Frames</source>
<translation>Unlink Text Frames</translation>
</message>
<message>
<source>&amp;Eye Dropper</source>
<translation>&amp;Eye Dropper</translation>
</message>
<message>
<source>Copy Item Properties</source>
<translation>Copy Item Properties</translation>
</message>
<message>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">&amp;Manage Pictures</translation>
</message>
<message>
<source>&amp;Hyphenate Text</source>
<translation>&amp;Hyphenate Text</translation>
</message>
<message>
<source>&amp;Generate Table Of Contents</source>
<translation>&amp;Generate Table Of Contents</translation>
</message>
<message>
<source>&amp;About Scribus</source>
<translation>&amp;About Scribus</translation>
</message>
<message>
<source>About &amp;Qt</source>
<translation>About &amp;Qt</translation>
</message>
<message>
<source>Toolti&amp;ps</source>
<translation>Toolti&amp;ps</translation>
</message>
<message>
<source>Scribus &amp;Manual...</source>
<translation>Scribus &amp;Manual...</translation>
</message>
<message>
<source>Smart &amp;Hyphen</source>
<translation type="obsolete">Smart &amp;Hyphen</translation>
</message>
<message>
<source>Non Breaking &amp;Space</source>
<translation>Non Breaking &amp;Space</translation>
</message>
<message>
<source>Page &amp;Number</source>
<translation>Page &amp;Number</translation>
</message>
<message>
<source>Copyright</source>
<translation>Copyright</translation>
</message>
<message>
<source>Registered Trademark</source>
<translation>Registered Trademark</translation>
</message>
<message>
<source>Trademark</source>
<translation>Trademark</translation>
</message>
<message>
<source>Bullet</source>
<translation>Bullet</translation>
</message>
<message>
<source>Em Dash</source>
<translation>Em Dash</translation>
</message>
<message>
<source>En Dash</source>
<translation>En Dash</translation>
</message>
<message>
<source>Figure Dash</source>
<translation>Figure Dash</translation>
</message>
<message>
<source>Quotation Dash</source>
<translation>Quotation Dash</translation>
</message>
<message>
<source>Toggle Palettes</source>
<translation>Toggle Palettes</translation>
</message>
<message>
<source>S&amp;hadow</source>
<translation>S&amp;hadow</translation>
</message>
<message>
<source>&amp;Low Resolution</source>
<translation>&amp;Low Resolution</translation>
</message>
<message>
<source>&amp;Normal Resolution</source>
<translation>&amp;Normal Resolution</translation>
</message>
<message>
<source>&amp;Full Resolution</source>
<translation>&amp;Full Resolution</translation>
</message>
<message>
<source>Edit Image...</source>
<translation>Edit Image...</translation>
</message>
<message>
<source>&amp;Update Image</source>
<translation>&amp;Update Image</translation>
</message>
<message>
<source>Adjust Frame to Image</source>
<translation>Adjust Frame to Image</translation>
</message>
<message>
<source>Extended Image Properties</source>
<translation>Extended Image Properties</translation>
</message>
<message>
<source>Show Control Characters</source>
<translation>Show Control Characters</translation>
</message>
<message>
<source>&amp;Align and Distribute</source>
<translation>&amp;Align and Distribute</translation>
</message>
<message>
<source>Edit Text...</source>
<translation>Edit Text...</translation>
</message>
<message>
<source>New Line</source>
<translation>New Line</translation>
</message>
<message>
<source>Frame Break</source>
<translation>Frame Break</translation>
</message>
<message>
<source>Column Break</source>
<translation>Column Break</translation>
</message>
<message>
<source>Non Breaking Dash</source>
<translation>Non Breaking Dash</translation>
</message>
<message>
<source>Toggle Guides</source>
<translation>Toggle Guides</translation>
</message>
<message>
<source>&amp;Arrange Pages</source>
<translation>&amp;Arrange Pages</translation>
</message>
<message>
<source>Dehyphenate Text</source>
<translation>Dehyphenate Text</translation>
</message>
<message>
<source>Manage Page Properties...</source>
<translation>Manage Page Properties...</translation>
</message>
<message>
<source>Rulers relative to Page</source>
<translation type="obsolete">Rulers relative to Page</translation>
</message>
<message>
<source>Print Previe&amp;w</source>
<translation>Print Previe&amp;w</translation>
</message>
<message>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScripts...</translation>
</message>
<message>
<source>Convert to Master Page...</source>
<translation>Convert to Master Page...</translation>
</message>
<message>
<source>&amp;Cascade</source>
<translation>&amp;Cascade</translation>
</message>
<message>
<source>&amp;Tile</source>
<translation>&amp;Tile</translation>
</message>
<message>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">&amp;About Plug-ins</translation>
</message>
<message>
<source>More Info...</source>
<translation>More Info...</translation>
</message>
<message>
<source>&amp;Printing Enabled</source>
<translation>&amp;Printing Enabled</translation>
</message>
<message>
<source>&amp;Flip Horizontally</source>
<translation>&amp;Flip Horizontally</translation>
</message>
<message>
<source>&amp;Flip Vertically</source>
<translation>&amp;Flip Vertically</translation>
</message>
<message>
<source>Show Rulers</source>
<translation>Show Rulers</translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<source>Solidus</source>
<translation>Solidus</translation>
</message>
<message>
<source>Middle Dot</source>
<translation>Middle Dot</translation>
</message>
<message>
<source>En Space</source>
<translation>En Space</translation>
</message>
<message>
<source>Em Space</source>
<translation>Em Space</translation>
</message>
<message>
<source>Thin Space</source>
<translation>Thin Space</translation>
</message>
<message>
<source>Thick Space</source>
<translation>Thick Space</translation>
</message>
<message>
<source>Mid Space</source>
<translation>Mid Space</translation>
</message>
<message>
<source>Hair Space</source>
<translation>Hair Space</translation>
</message>
<message>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<source>st</source>
<translation>st</translation>
</message>
<message>
<source>S&amp;tyles...</source>
<translation>S&amp;tyles...</translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>&amp;Outline</translation>
</message>
<message>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>&amp;Outlines</translation>
</message>
<message>
<source>Paste (&amp;Absolute)</source>
<translation>Paste (&amp;Absolute)</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>C&amp;lear</translation>
</message>
<message>
<source>Insert PDF Push Button</source>
<translation>Insert PDF Push Button</translation>
</message>
<message>
<source>Insert PDF Text Field</source>
<translation>Insert PDF Text Field</translation>
</message>
<message>
<source>Insert PDF Check Box</source>
<translation>Insert PDF Check Box</translation>
</message>
<message>
<source>Insert PDF Combo Box</source>
<translation>Insert PDF Combo Box</translation>
</message>
<message>
<source>Insert PDF List Box</source>
<translation>Insert PDF List Box</translation>
</message>
<message>
<source>Insert Text Annotation</source>
<translation>Insert Text Annotation</translation>
</message>
<message>
<source>Insert Link Annotation</source>
<translation>Insert Link Annotation</translation>
</message>
<message>
<source>Save as &amp;EPS...</source>
<translation>Save as &amp;EPS...</translation>
</message>
<message>
<source>Show Text Frame Columns</source>
<translation>Show Text Frame Columns</translation>
</message>
<message>
<source>&amp;Frame...</source>
<translation type="obsolete">&amp;Frame...</translation>
</message>
<message>
<source>Preview Mode</source>
<translation>Preview Mode</translation>
</message>
<message>
<source>Show Layer Indicators</source>
<translation>Show Layer Indicators</translation>
</message>
<message>
<source>Patterns...</source>
<translation type="obsolete">Patterns...</translation>
</message>
<message>
<source>Document &amp;Setup (old)...</source>
<translation type="obsolete">Document &amp;Setup (old)...</translation>
</message>
<message>
<source>P&amp;references (old)...</source>
<translation type="obsolete">P&amp;references (old)...</translation>
</message>
<message>
<source>Send to Patterns</source>
<translation type="obsolete">Send to Patterns</translation>
</message>
<message>
<source>Sticky Tools</source>
<translation>Sticky Tools</translation>
</message>
<message>
<source>&amp;Fit to Height</source>
<translation>&amp;Fit to Height</translation>
</message>
<message>
<source>Fit to Width</source>
<translation>Fit to Width</translation>
</message>
<message>
<source>Show Bleeds</source>
<translation>Show Bleeds</translation>
</message>
<message>
<source>Insert 3D Annotation</source>
<translation>Insert 3D Annotation</translation>
</message>
<message>
<source>Soft &amp;Hyphen</source>
<translation>Soft &amp;Hyphen</translation>
</message>
<message>
<source>&amp;Zero Width Space</source>
<translation>&amp;Zero Width Space</translation>
</message>
<message>
<source>Zero Width NB Space</source>
<translation>Zero Width NB Space</translation>
</message>
<message>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>Apostrophe</translation>
</message>
<message>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>Straight Double</translation>
</message>
<message>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>Single Left</translation>
</message>
<message>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>Single Right</translation>
</message>
<message>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>Double Left</translation>
</message>
<message>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>Double Right</translation>
</message>
<message>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>Single Reversed</translation>
</message>
<message>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>Double Reversed</translation>
</message>
<message>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>Single Left Guillemet</translation>
</message>
<message>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>Single Right Guillemet</translation>
</message>
<message>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>Double Left Guillemet</translation>
</message>
<message>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>Double Right Guillemet</translation>
</message>
<message>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>Low Single Comma</translation>
</message>
<message>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>Low Double Comma</translation>
</message>
<message>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>CJK Single Left</translation>
</message>
<message>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>CJK Single Right</translation>
</message>
<message>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>CJK Double Left</translation>
</message>
<message>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>CJK Double Right</translation>
</message>
<message>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<source>Edit Latex Source...</source>
<translation type="obsolete">Edit Latex Source...</translation>
</message>
<message>
<source>Insert &amp;Text Frame</source>
<translation>Insert &amp;Text Frame</translation>
</message>
<message>
<source>Insert &amp;Image Frame</source>
<translation>Insert &amp;Image Frame</translation>
</message>
<message>
<source>Insert &amp;Latex Frame</source>
<translation type="obsolete">Insert &amp;Latex Frame</translation>
</message>
<message>
<source>Insert T&amp;able</source>
<translation>Insert T&amp;able</translation>
</message>
<message>
<source>Insert &amp;Shape</source>
<translation>Insert &amp;Shape</translation>
</message>
<message>
<source>Insert &amp;Polygon</source>
<translation>Insert &amp;Polygon</translation>
</message>
<message>
<source>Insert &amp;Line</source>
<translation>Insert &amp;Line</translation>
</message>
<message>
<source>Insert &amp;Bezier Curve</source>
<translation>Insert &amp;Bezier Curve</translation>
</message>
<message>
<source>Insert &amp;Freehand Line</source>
<translation>Insert &amp;Freehand Line</translation>
</message>
<message>
<source>Scribus Homepage</source>
<translation>Scribus Homepage</translation>
</message>
<message>
<source>Scribus Online Documentation</source>
<translation>Scribus Online Documentation</translation>
</message>
<message>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<source>Getting Started with Scribus</source>
<translation>Getting Started with Scribus</translation>
</message>
<message>
<source>Show Context Menu</source>
<translation>Show Context Menu</translation>
</message>
<message>
<source>&amp;Manage Images</source>
<translation>&amp;Manage Images</translation>
</message>
<message>
<source>&amp;About Plugins</source>
<translation>&amp;About Plug-ins</translation>
</message>
<message>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Insert Unicode Character Begin Sequence</translation>
</message>
<message>
<source>Get Vector File...</source>
<translation>Get Vector File...</translation>
</message>
<message>
<source>Advanced Select All...</source>
<translation>Advanced Select All...</translation>
</message>
<message>
<source>Edit Source...</source>
<translation>Edit Source...</translation>
</message>
<message>
<source>Replace Colors...</source>
<translation>Replace Colours...</translation>
</message>
<message>
<source>Rulers Relative to Page</source>
<translation>Rulers Relative to Page</translation>
</message>
<message>
<source>Insert &amp;Render Frame</source>
<translation>Insert &amp;Render Frame</translation>
</message>
<message>
<source>Check for Updates</source>
<translation>Check for Updates</translation>
</message>
<message>
<source>Number of Pages</source>
<translation>Number of Pages</translation>
</message>
<message>
<source>Adjust Image to Frame</source>
<translation>Adjust Image to Frame</translation>
</message>
<message>
<source>Move/Resize value indicator</source>
<translation type="obsolete">Move/Resize value indicator</translation>
</message>
<message>
<source>File</source>
<translation>File</translation>
</message>
<message>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
<message>
<source>Edit</source>
<translation>Edit</translation>
</message>
<message>
<source>&amp;Edit</source>
<translation>&amp;Edit</translation>
</message>
<message>
<source>Style</source>
<translation>Style</translation>
</message>
<message>
<source>&amp;Style</source>
<translation>&amp;Style</translation>
</message>
<message>
<source>Item</source>
<translation>Item</translation>
</message>
<message>
<source>&amp;Item</source>
<translation>&amp;Item</translation>
</message>
<message>
<source>Insert</source>
<translation>Insert</translation>
</message>
<message>
<source>I&amp;nsert</source>
<translation>I&amp;nsert</translation>
</message>
<message>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<source>&amp;Page</source>
<translation>&amp;Page</translation>
</message>
<message>
<source>View</source>
<translation>View</translation>
</message>
<message>
<source>&amp;View</source>
<translation>&amp;View</translation>
</message>
<message>
<source>Extras</source>
<translation>Extras</translation>
</message>
<message>
<source>E&amp;xtras</source>
<translation>E&amp;xtras</translation>
</message>
<message>
<source>Windows</source>
<translation>Windows</translation>
</message>
<message>
<source>&amp;Windows</source>
<translation>&amp;Windows</translation>
</message>
<message>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<source>&amp;Help</source>
<translation>&amp;Help</translation>
</message>
<message>
<source>Plugin Menu Items</source>
<translation>Plug-in Menu Items</translation>
</message>
<message>
<source>Others</source>
<translation>Others</translation>
</message>
<message>
<source>Unicode Characters</source>
<translation>Unicode Characters</translation>
</message>
<message>
<source>Move/Resize Value Indicator</source>
<translation>Move/Resize Value Indicator</translation>
</message>
<message>
<source>New &amp;from Template...</source>
<translation>New &amp;from Template...</translation>
</message>
<message>
<source>&amp;Transform</source>
<translation>&amp;Transform</translation>
</message>
<message>
<source>Insert Calligraphic Line</source>
<translation>Insert Calligraphic Line</translation>
</message>
<message>
<source>Insert Arc</source>
<translation>Insert Arc</translation>
</message>
<message>
<source>Insert Spiral</source>
<translation>Insert Spiral</translation>
</message>
<message>
<source>Paste Image from Clipboard</source>
<translation>Paste Image from Clipboard</translation>
</message>
<message>
<source>Insert Rows...</source>
<translation>Insert Rows...</translation>
</message>
<message>
<source>Insert Columns...</source>
<translation>Insert Columns...</translation>
</message>
<message>
<source>Delete Rows</source>
<translation>Delete Rows</translation>
</message>
<message>
<source>Delete Columns</source>
<translation>Delete Columns</translation>
</message>
<message>
<source>Merge Cells</source>
<translation>Merge Cells</translation>
</message>
<message>
<source>Split Cells...</source>
<translation>Split Cells...</translation>
</message>
<message>
<source>Set Row Heights...</source>
<translation>Set Row Heights...</translation>
</message>
<message>
<source>Set Column Widths...</source>
<translation>Set Column Widths...</translation>
</message>
<message>
<source>Distribute Rows Evenly</source>
<translation>Distribute Rows Evenly</translation>
</message>
<message>
<source>Distribute Columns Evenly</source>
<translation>Distribute Columns Evenly</translation>
</message>
<message>
<source>Adjust Frame to Table</source>
<translation>Adjust Frame to Table</translation>
</message>
<message>
<source>Adjust Table to Frame</source>
<translation>Adjust Table to Frame</translation>
</message>
<message>
<source>Unweld items</source>
<translation>Unweld items</translation>
</message>
<message>
<source>Weld items</source>
<translation>Weld items</translation>
</message>
<message>
<source>Edit weld item</source>
<translation>Edit weld item</translation>
</message>
<message>
<source>&amp;Frames...</source>
<translation>&amp;Frames...</translation>
</message>
<message>
<source>Inline Frames</source>
<translation>Inline Frames</translation>
</message>
<message>
<source>Unlink Text Frame with Text Copy</source>
<translation>Unlink Text Frame with Text Copy</translation>
</message>
<message>
<source>Unlink Text Frame with Text Cut</source>
<translation>Unlink Text Frame with Text Cut</translation>
</message>
<message>
<source>Adjust Frame Height to Text</source>
<translation>Adjust Frame Height to Text</translation>
</message>
<message>
<source>Marks...</source>
<translation>Marks...</translation>
</message>
<message>
<source>Notes Styles...</source>
<translation>Notes Styles...</translation>
</message>
<message>
<source>Adjust Group</source>
<translation>Adjust Group</translation>
</message>
<message>
<source>Anchor Mark</source>
<translation>Anchor Mark</translation>
</message>
<message>
<source>Variable Text</source>
<translation>Variable Text</translation>
</message>
<message>
<source>Reference to Item</source>
<translation>Reference to Item</translation>
</message>
<message>
<source>Reference to Mark</source>
<translation>Reference to Mark</translation>
</message>
<message>
<source>Foot/Endnote</source>
<translation>Foot/Endnote</translation>
</message>
<message>
<source>Edit Mark</source>
<translation>Edit Mark</translation>
</message>
<message>
<source>Update Marks</source>
<translation>Update Marks</translation>
</message>
<message>
<source>Snap to Items</source>
<translation>Snap to Items</translation>
</message>
<message>
<source>Insert PDF Radio Button</source>
<translation>Insert PDF Radio Button</translation>
</message>
<message>
<source>Colors and Fills...</source>
<translation>Colors and Fills...</translation>
</message>
<message>
<source>Patterns</source>
<translation>Patterns</translation>
</message>
<message>
<source>Inline Items</source>
<translation>Inline Items</translation>
</message>
<message>
<source>&amp;Symbol</source>
<translation>&amp;Symbol</translation>
</message>
<message>
<source>&amp;Update Document</source>
<translation>&amp;Update Document</translation>
</message>
<message>
<source>Table</source>
<translation>Table</translation>
</message>
<message>
<source>&amp;Table</source>
<translation>&amp;Table</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
<message>
<source>CMS Settings</source>
<translation>CMS Settings</translation>
</message>
</context>
<context>
<name>AlignDistribute</name>
<message>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<source>&amp;Relative To:</source>
<translation>&amp;Relative To:</translation>
</message>
<message>
<source>&amp;Align Sides By:</source>
<translation>&amp;Align Sides By:</translation>
</message>
<message>
<source>...</source>
<translation>...</translation>
</message>
<message>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
<message>
<source>Reverse Distribution</source>
<translation>Reverse Distribution</translation>
</message>
<message>
<source>Swap</source>
<translation>Swap</translation>
</message>
<message>
<source>DockWidget</source>
<translation>DockWidget</translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<source>Align and Distribute</source>
<translation>Align and Distribute</translation>
</message>
<message>
<source>&amp;Relative to:</source>
<translation>&amp;Relative to:</translation>
</message>
<message>
<source>First Selected</source>
<translation>First Selected</translation>
</message>
<message>
<source>Last Selected</source>
<translation>Last Selected</translation>
</message>
<message>
<source>Page</source>
<translation>Page</translation>
</message>
<message>
<source>Margins</source>
<translation>Margins</translation>
</message>
<message>
<source>Selection</source>
<translation>Selection</translation>
</message>
<message>
<source>&amp;Align Sides By:</source>
<translation>&amp;Align Sides By:</translation>
</message>
<message>
<source>Moving (Preserve Size)</source>
<translation type="obsolete">Moving (Preserve Size)</translation>
</message>
<message>
<source>Resizing (Preserve Opposite Side)</source>
<translation type="obsolete">Resizing (Preserve Opposite Side)</translation>
</message>
<message>
<source>&lt;qt&gt;When aligning one side of an item:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height), or &lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</source>
<translation type="obsolete">&lt;qt&gt;When aligning one side of an item:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height), or &lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<source>Align bottoms</source>
<translation>Align bottoms</translation>
</message>
<message>
<source>Align right sides</source>
<translation>Align right sides</translation>
</message>
<message>
<source>Center on vertical axis</source>
<translation>Centre on vertical axis</translation>
</message>
<message>
<source>Align left sides</source>
<translation>Align left sides</translation>
</message>
<message>
<source>Center on horizontal axis</source>
<translation>Centre on horizontal axis</translation>
</message>
<message>
<source>Align tops</source>
<translation>Align tops</translation>
</message>
<message>
<source>Distribute left sides equidistantly</source>
<translation>Distribute left sides equidistantly</translation>
</message>
<message>
<source>Distribute bottoms equidistantly</source>
<translation>Distribute bottoms equidistantly</translation>
</message>
<message>
<source>Distribute centers equidistantly horizontally</source>
<translation>Distribute centres equidistantly horizontally</translation>
</message>
<message>
<source>Distribute centers equidistantly vertically</source>
<translation>Distribute centres equidistantly vertically</translation>
</message>
<message>
<source>Distribute tops equidistantly</source>
<translation>Distribute tops equidistantly</translation>
</message>
<message>
<source>Distribute right sides equidistantly</source>
<translation>Distribute right sides equidistantly</translation>
</message>
<message>
<source>Guide</source>
<translation>Guide</translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation>&amp;Selected Guide:</translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation>&amp;Distance:</translation>
</message>
<message>
<source>Distribute the items with the distance specified</source>
<translation>Distribute the items with the distance specified</translation>
</message>
<message>
<source>When distributing by a set distance, reverse the direction of the distribution of items</source>
<translation>When distributing by a set distance, reverse the direction of the distribution of items</translation>
</message>
<message>
<source>None Selected</source>
<translation>None Selected</translation>
</message>
<message>
<source>Swap items to the left</source>
<translation>Swap items to the left</translation>
</message>
<message>
<source>Swap items to the right</source>
<translation>Swap items to the right</translation>
</message>
<message>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<source>Align right sides of items to left side of anchor</source>
<translation>Align right sides of items to left side of anchor</translation>
</message>
<message>
<source>Align left sides of items to right side of anchor</source>
<translation>Align left sides of items to right side of anchor</translation>
</message>
<message>
<source>Align tops of items to bottom of anchor</source>
<translation>Align tops of items to bottom of anchor</translation>
</message>
<message>
<source>Align bottoms of items to top of anchor</source>
<translation>Align bottoms of items to top of anchor</translation>
</message>
<message>
<source>Make horizontal gaps between items equal</source>
<translation>Make horizontal gaps between items equal</translation>
</message>
<message>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>Make horizontal gaps between items equal to the value specified</translation>
</message>
<message>
<source>Make vertical gaps between items equal</source>
<translation>Make vertical gaps between items equal</translation>
</message>
<message>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>Make vertical gaps between items equal to the value specified</translation>
</message>
<message>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>Make horizontal gaps between items and sides of page equal</translation>
</message>
<message>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>Make vertical gaps between items and the top and bottom of page margins equal</translation>
</message>
<message>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>Make horizontal gaps between items and sides of page margins equal</translation>
</message>
<message>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>Make vertical gaps between items and the top and bottom of page equal</translation>
</message>
<message>
<source>Align</source>
<translation>Align</translation>
</message>
<message>
<source>Distribute</source>
<translation>Distribute</translation>
</message>
<message>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<source>The location of the selected guide to align to</source>
<translation>The location of the selected guide to align to</translation>
</message>
<message>
<source>Move</source>
<translation>Move</translation>
</message>
<message>
<source>Resize</source>
<translation>Resize</translation>
</message>
<message>
<source>&lt;qt&gt;When aligning one side of an item do one of the following:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height)&lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;When aligning one side of an item do one of the following:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height)&lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<source>Align Text Left</source>
<translation>Align Text Left</translation>
</message>
<message>
<source>Align Text Right</source>
<translation>Align Text Right</translation>
</message>
<message>
<source>Align Text Center</source>
<translation>Align Text Centre</translation>
</message>
<message>
<source>Align Text Justified</source>
<translation>Align Text Justified</translation>
</message>
<message>
<source>Align Text Forced Justified</source>
<translation>Align Text Forced Justified</translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<source>Field Properties</source>
<translation type="obsolete">Field Properties</translation>
</message>
<message>
<source>Type:</source>
<translation type="obsolete">Type:</translation>
</message>
<message>
<source>Button</source>
<translation type="obsolete">Button</translation>
</message>
<message>
<source>Text Field</source>
<translation type="obsolete">Text Field</translation>
</message>
<message>
<source>Check Box</source>
<translation type="obsolete">Check Box</translation>
</message>
<message>
<source>Combo Box</source>
<translation type="obsolete">Combo Box</translation>
</message>
<message>
<source>List Box</source>
<translation type="obsolete">List Box</translation>
</message>
<message>
<source>Properties</source>
<translation type="obsolete">Properties</translation>
</message>
<message>
<source>Name:</source>
<translation type="obsolete">Name:</translation>
</message>
<message>
<source>Text</source>
<translation type="obsolete">Text</translation>
</message>
<message>
<source>Border</source>
<translation type="obsolete">Border</translation>
</message>
<message>
<source>Color:</source>
<translation type="obsolete">Colour:</translation>
</message>
<message>
<source>None</source>
<translation type="obsolete">None</translation>
</message>
<message>
<source>Width:</source>
<translation type="obsolete">Width:</translation>
</message>
<message>
<source>Thin</source>
<translation type="obsolete">Thin</translation>
</message>
<message>
<source>Normal</source>
<translation type="obsolete">Normal</translation>
</message>
<message>
<source>Wide</source>
<translation type="obsolete">Wide</translation>
</message>
<message>
<source>Style:</source>
<translation type="obsolete">Style:</translation>
</message>
<message>
<source>Solid</source>
<translation type="obsolete">Solid</translation>
</message>
<message>
<source>Dashed</source>
<translation type="obsolete">Dashed</translation>
</message>
<message>
<source>Underline</source>
<translation type="obsolete">Underline</translation>
</message>
<message>
<source>Beveled</source>
<translation type="obsolete">Bevelled</translation>
</message>
<message>
<source>Inset</source>
<translation type="obsolete">Inset</translation>
</message>
<message>
<source>Other</source>
<translation type="obsolete">Other</translation>
</message>
<message>
<source>Read Only</source>
<translation type="obsolete">Read Only</translation>
</message>
<message>
<source>Required</source>
<translation type="obsolete">Required</translation>
</message>
<message>
<source>Visibility:</source>
<translation type="obsolete">Visibility:</translation>
</message>
<message>
<source>Visible</source>
<translation type="obsolete">Visible</translation>
</message>
<message>
<source>Hidden</source>
<translation type="obsolete">Hidden</translation>
</message>
<message>
<source>No Print</source>
<translation type="obsolete">No Print</translation>
</message>
<message>
<source>No View</source>
<translation type="obsolete">No View</translation>
</message>
<message>
<source>Appearance</source>
<translation type="obsolete">Appearance</translation>
</message>
<message>
<source>Text for Button Down</source>
<translation type="obsolete">Text for Button Down</translation>
</message>
<message>
<source>Text for Roll Over</source>
<translation type="obsolete">Text for Roll Over</translation>
</message>
<message>
<source>Icons</source>
<translation type="obsolete">Icons</translation>
</message>
<message>
<source>Use Icons</source>
<translation type="obsolete">Use Icons</translation>
</message>
<message>
<source>Remove</source>
<translation type="obsolete">Remove</translation>
</message>
<message>
<source>Pressed</source>
<translation type="obsolete">Pressed</translation>
</message>
<message>
<source>Roll Over</source>
<translation type="obsolete">Roll Over</translation>
</message>
<message>
<source>Icon Placement...</source>
<translation type="obsolete">Icon Placement...</translation>
</message>
<message>
<source>Highlight</source>
<translation type="obsolete">Highlight</translation>
</message>
<message>
<source>Invert</source>
<translation type="obsolete">Invert</translation>
</message>
<message>
<source>Outlined</source>
<translation type="obsolete">Outlined</translation>
</message>
<message>
<source>Push</source>
<translation type="obsolete">Push</translation>
</message>
<message>
<source>Multi-Line</source>
<translation type="obsolete">Multi-Line</translation>
</message>
<message>
<source>Password</source>
<translation type="obsolete">Password</translation>
</message>
<message>
<source>Limit of</source>
<translation type="obsolete">Limit of</translation>
</message>
<message>
<source>Characters</source>
<translation type="obsolete">Characters</translation>
</message>
<message>
<source>Do Not Scroll</source>
<translation type="obsolete">Do Not Scroll</translation>
</message>
<message>
<source>Do Not Spell Check</source>
<translation type="obsolete">Do Not Spell Check</translation>
</message>
<message>
<source>Check Style:</source>
<translation type="obsolete">Check Style:</translation>
</message>
<message>
<source>Check</source>
<translation type="obsolete">Check</translation>
</message>
<message>
<source>Cross</source>
<translation type="obsolete">Cross</translation>
</message>
<message>
<source>Diamond</source>
<translation type="obsolete">Diamond</translation>
</message>
<message>
<source>Circle</source>
<translation type="obsolete">Circle</translation>
</message>
<message>
<source>Star</source>
<translation type="obsolete">Star</translation>
</message>
<message>
<source>Square</source>
<translation type="obsolete">Square</translation>
</message>
<message>
<source>Default is Checked</source>
<translation type="obsolete">Default is Checked</translation>
</message>
<message>
<source>Editable</source>
<translation type="obsolete">Editable</translation>
</message>
<message>
<source>Options</source>
<translation type="obsolete">Options</translation>
</message>
<message>
<source>Go To</source>
<translation type="obsolete">Go To</translation>
</message>
<message>
<source>Submit Form</source>
<translation type="obsolete">Submit Form</translation>
</message>
<message>
<source>Reset Form</source>
<translation type="obsolete">Reset Form</translation>
</message>
<message>
<source>Import Data</source>
<translation type="obsolete">Import Data</translation>
</message>
<message>
<source>Event:</source>
<translation type="obsolete">Event:</translation>
</message>
<message>
<source>Mouse Up</source>
<translation type="obsolete">Mouse Up</translation>
</message>
<message>
<source>Mouse Down</source>
<translation type="obsolete">Mouse Down</translation>
</message>
<message>
<source>Mouse Enter</source>
<translation type="obsolete">Mouse Enter</translation>
</message>
<message>
<source>Mouse Exit</source>
<translation type="obsolete">Mouse Exit</translation>
</message>
<message>
<source>On Focus</source>
<translation type="obsolete">On Focus</translation>
</message>
<message>
<source>On Blur</source>
<translation type="obsolete">On Blur</translation>
</message>
<message>
<source>Script:</source>
<translation type="obsolete">Script:</translation>
</message>
<message>
<source>Edit...</source>
<translation type="obsolete">Edit...</translation>
</message>
<message>
<source>Submit to URL:</source>
<translation type="obsolete">Submit to URL:</translation>
</message>
<message>
<source>Submit Data as HTML</source>
<translation type="obsolete">Submit Data as HTML</translation>
</message>
<message>
<source>Import Data from:</source>
<translation type="obsolete">Import Data from:</translation>
</message>
<message>
<source>Destination</source>
<translation type="obsolete">Destination</translation>
</message>
<message>
<source>To File:</source>
<translation type="obsolete">To File:</translation>
</message>
<message>
<source>Change...</source>
<translation type="obsolete">Change...</translation>
</message>
<message>
<source>Page:</source>
<translation type="obsolete">Page:</translation>
</message>
<message>
<source>X-Pos:</source>
<translation type="obsolete">X-Pos:</translation>
</message>
<message>
<source> pt</source>
<translation type="obsolete"> pt</translation>
</message>
<message>
<source>Y-Pos:</source>
<translation type="obsolete">Y-Pos:</translation>
</message>
<message>
<source>Action</source>
<translation type="obsolete">Action</translation>
</message>
<message>
<source>Field is formatted as:</source>
<translation type="obsolete">Field is formatted as:</translation>
</message>
<message>
<source>Plain</source>
<translation type="obsolete">Plain</translation>
</message>
<message>
<source>Number</source>
<translation type="obsolete">Number</translation>
</message>
<message>
<source>Percentage</source>
<translation type="obsolete">Percentage</translation>
</message>
<message>
<source>Date</source>
<translation type="obsolete">Date</translation>
</message>
<message>
<source>Time</source>
<translation type="obsolete">Time</translation>
</message>
<message>
<source>Custom</source>
<translation type="obsolete">Custom</translation>
</message>
<message>
<source>Number Format</source>
<translation type="obsolete">Number Format</translation>
</message>
<message>
<source>Decimals:</source>
<translation type="obsolete">Decimals:</translation>
</message>
<message>
<source>Use Currency Symbol</source>
<translation type="obsolete">Use Currency Symbol</translation>
</message>
<message>
<source>Prepend Currency Symbol</source>
<translation type="obsolete">Prepend Currency Symbol</translation>
</message>
<message>
<source>Formatting</source>
<translation type="obsolete">Formatting</translation>
</message>
<message>
<source>Percent Format</source>
<translation type="obsolete">Percent Format</translation>
</message>
<message>
<source>Date Format</source>
<translation type="obsolete">Date Format</translation>
</message>
<message>
<source>Time Format</source>
<translation type="obsolete">Time Format</translation>
</message>
<message>
<source>Custom Scripts</source>
<translation type="obsolete">Custom Scripts</translation>
</message>
<message>
<source>Format:</source>
<translation type="obsolete">Format:</translation>
</message>
<message>
<source>Keystroke:</source>
<translation type="obsolete">Keystroke:</translation>
</message>
<message>
<source>Format</source>
<translation type="obsolete">Format</translation>
</message>
<message>
<source>Value is not validated</source>
<translation type="obsolete">Value is not validated</translation>
</message>
<message>
<source>Value must be greater than or equal to:</source>
<translation type="obsolete">Value must be greater than or equal to:</translation>
</message>
<message>
<source>and less or equal to:</source>
<translation type="obsolete">and less or equal to:</translation>
</message>
<message>
<source>Custom validate script:</source>
<translation type="obsolete">Custom validate script:</translation>
</message>
<message>
<source>Validate</source>
<translation type="obsolete">Validate</translation>
</message>
<message>
<source>Value is not calculated</source>
<translation type="obsolete">Value is not calculated</translation>
</message>
<message>
<source>Value is the</source>
<translation type="obsolete">Value is the</translation>
</message>
<message>
<source>sum</source>
<translation type="obsolete">sum</translation>
</message>
<message>
<source>product</source>
<translation type="obsolete">product</translation>
</message>
<message>
<source>average</source>
<translation type="obsolete">average</translation>
</message>
<message>
<source>minimum</source>
<translation type="obsolete">minimum</translation>
</message>
<message>
<source>maximum</source>
<translation type="obsolete">maximum</translation>
</message>
<message>
<source>of the following fields:</source>
<translation type="obsolete">of the following fields:</translation>
</message>
<message>
<source>Pick...</source>
<translation type="obsolete">Pick...</translation>
</message>
<message>
<source>Custom calculation script:</source>
<translation type="obsolete">Custom calculation script:</translation>
</message>
<message>
<source>Calculate</source>
<translation type="obsolete">Calculate</translation>
</message>
<message>
<source>OK</source>
<translation type="obsolete">OK</translation>
</message>
<message>
<source>Cancel</source>
<translation type="obsolete">Cancel</translation>
</message>
<message>
<source>Enter a comma separated list of fields here</source>
<translation type="obsolete">Enter a comma separated list of fields here</translation>
</message>
<message>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation type="obsolete">You need at least the Icon for Normal to use Icons for Buttons</translation>
</message>
<message>
<source>Open</source>
<translation type="obsolete">Open</translation>
</message>
<message>
<source>Example:</source>
<translation type="obsolete">Example:</translation>
</message>
<message>
<source>Selection Change</source>
<translation type="obsolete">Selection Change</translation>
</message>
<message>
<source>Font for use with PDF 1.3:</source>
<translation type="obsolete">Font for use with PDF 1.3:</translation>
</message>
<message>
<source>Flag is ignored for PDF 1.3</source>
<translation type="obsolete">Flag is ignored for PDF 1.3</translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation type="obsolete">PDF Files (*.pdf);;All Files (*)</translation>
</message>
<message>
<source>JavaScript</source>
<translation type="obsolete">JavaScript</translation>
</message>
<message>
<source>None</source>
<comment>highlight</comment>
<translation type="obsolete">None</translation>
</message>
<message>
<source>None</source>
<comment>action</comment>
<translation type="obsolete">None</translation>
</message>
<message>
<source>Tooltip:</source>
<translation type="obsolete">Tooltip:</translation>
</message>
<message>
<source>Do Not Export Value</source>
<translation type="obsolete">Do Not Export Value</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation type="obsolete">Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation type="obsolete">Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</translation>
</message>
<message>
<source>Export absolute Filename</source>
<translation type="obsolete">Export absolute Filename</translation>
</message>
<message>
<source>Submit format:</source>
<translation type="obsolete">Submit format:</translation>
</message>
<message>
<source>FDF</source>
<translation type="obsolete">FDF</translation>
</message>
<message>
<source>HTML</source>
<translation type="obsolete">HTML</translation>
</message>
<message>
<source>XFDF</source>
<translation type="obsolete">XFDF</translation>
</message>
<message>
<source>PDF</source>
<translation type="obsolete">PDF</translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<source>Annotation Properties</source>
<translation>Annotation Properties</translation>
</message>
<message>
<source>Text</source>
<translation>Text</translation>
</message>
<message>
<source>Link</source>
<translation>Link</translation>
</message>
<message>
<source>External Link</source>
<translation>External Link</translation>
</message>
<message>
<source>External Web-Link</source>
<translation>External Web-Link</translation>
</message>
<message>
<source>Destination</source>
<translation>Destination</translation>
</message>
<message>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation>C&amp;hange...</translation>
</message>
<message>
<source>&amp;Page:</source>
<translation>&amp;Page:</translation>
</message>
<message>
<source>&amp;X-Pos</source>
<translation>&amp;X-Pos</translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation>&amp;Y-Pos:</translation>
</message>
<message>
<source>%1;;All Files (*)</source>
<translation>%1;;All Files (*)</translation>
</message>
<message>
<source>Export absolute Filename</source>
<translation>Export absolute Filename</translation>
</message>
<message>
<source>Options</source>
<translation>Options</translation>
</message>
<message>
<source>Icon:</source>
<translation>Icon:</translation>
</message>
<message>
<source>Note</source>
<translation>Note</translation>
</message>
<message>
<source>Comment</source>
<translation>Comment</translation>
</message>
<message>
<source>Key</source>
<translation>Key</translation>
</message>
<message>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<source>NewParagraph</source>
<translation>NewParagraph</translation>
</message>
<message>
<source>Paragraph</source>
<translation>Paragraph</translation>
</message>
<message>
<source>Insert</source>
<translation>Insert</translation>
</message>
<message>
<source>Cross</source>
<translation>Cross</translation>
</message>
<message>
<source>Circle</source>
<translation>Circle</translation>
</message>
<message>
<source>Annotation is Open</source>
<translation>Annotation is Open</translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<source>Apply Master Page</source>
<translation>Apply Master Page</translation>
</message>
<message>
<source>&amp;Master Page:</source>
<translation>&amp;Master Page:</translation>
</message>
<message>
<source>Apply To</source>
<translation type="obsolete">Apply To</translation>
</message>
<message>
<source>Current &amp;page</source>
<translation type="obsolete">Current &amp;page</translation>
</message>
<message>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<source>&amp;Even pages</source>
<translation type="obsolete">&amp;Even pages</translation>
</message>
<message>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<source>O&amp;dd pages</source>
<translation type="obsolete">O&amp;dd pages</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>&amp;All pages</source>
<translation type="obsolete">&amp;All pages</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Within range</source>
<translation type="obsolete">&amp;Within range</translation>
</message>
<message>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<source>to</source>
<translation>to</translation>
</message>
<message>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>Apply the selected master page to even, odd or all pages within the following range</translation>
</message>
<message>
<source>Possible Hyphenation</source>
<translation>Possible Hyphenation</translation>
</message>
<message>
<source>Apply to</source>
<translation>Apply to</translation>
</message>
<message>
<source>Current &amp;Page</source>
<translation>Current &amp;Page</translation>
</message>
<message>
<source>&amp;Even Pages</source>
<translation>&amp;Even Pages</translation>
</message>
<message>
<source>O&amp;dd Pages</source>
<translation>O&amp;dd Pages</translation>
</message>
<message>
<source>&amp;All Pages</source>
<translation>&amp;All Pages</translation>
</message>
<message>
<source>&amp;Within Range</source>
<translation>&amp;Within Range</translation>
</message>
</context>
<context>
<name>ArcVectorBase</name>
<message>
<source>Edit Arc</source>
<translation>Edit Arc</translation>
</message>
<message>
<source>Start Angle:</source>
<translation>Start Angle:</translation>
</message>
<message>
<source>End Angle:</source>
<translation>End Angle:</translation>
</message>
<message>
<source>Height:</source>
<translation>Height:</translation>
</message>
<message>
<source>Width:</source>
<translation>Width:</translation>
</message>
<message>
<source>End Edit</source>
<translation>End Edit</translation>
</message>
</context>
<context>
<name>ArcWidgetBase</name>
<message>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<source>Start Angle:</source>
<translation>Start Angle:</translation>
</message>
<message>
<source>End Angle:</source>
<translation>End Angle:</translation>
</message>
<message>
<source>Sample Polygon</source>
<translation>Sample Polygon</translation>
</message>
</context>
<context>
<name>AspellPlugin</name>
<message>
<source>Spell-checking support</source>
<translation>Spell-checking support</translation>
</message>
<message>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="obsolete">Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</translation>
</message>
<message>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<source>Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</translation>
</message>
<message>
<source>Aspell Plugin Error</source>
<translation>Aspell Plug-in Error</translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<source>Spell Check</source>
<translation>Spell Check</translation>
</message>
<message>
<source>Replacement:</source>
<translation>Replacement:</translation>
</message>
<message>
<source>The currently active dictionary. Scribus uses Aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation>The currently active dictionary. Scribus uses Aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</translation>
</message>
<message>
<source>&amp;Add Word</source>
<translation>&amp;Add Word</translation>
</message>
<message>
<source>&amp;Change</source>
<translation>&amp;Change</translation>
</message>
<message>
<source>&amp;Exit</source>
<translation type="obsolete">&amp;Exit</translation>
</message>
<message>
<source>Not in Dictionary:</source>
<translation>Not in Dictionary:</translation>
</message>
<message>
<source>Word that was not found in the active dictionary</source>
<translation>Word that was not found in the active dictionary</translation>
</message>
<message>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation>Replacement text for the current word that was not found in the dictionary</translation>
</message>
<message>
<source>Active Dictionary: </source>
<translation>Active Dictionary: </translation>
</message>
<message>
<source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation type="obsolete">The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</translation>
</message>
<message>
<source>Ignore the current text not found in the active dictionary</source>
<translation>Ignore the current text not found in the active dictionary</translation>
</message>
<message>
<source>&amp;Ignore</source>
<translation>&amp;Ignore</translation>
</message>
<message>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation>Ignore all occurrences of the current text not found in the active dictionary</translation>
</message>
<message>
<source>I&amp;gnore All</source>
<translation>I&amp;gnore All</translation>
</message>
<message>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation>Add the current word to the your personal spelling dictionary for future use</translation>
</message>
<message>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation>Change the current word that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</translation>
</message>
<message>
<source>Change A&amp;ll</source>
<translation>Change A&amp;ll</translation>
</message>
<message>
<source>Close</source>
<translation>Close</translation>
</message>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<source>Loaded </source>
<translation>Loaded </translation>
</message>
<message>
<source>default </source>
<translation>default </translation>
</message>
<message>
<source> aspell dictionary.</source>
<translation type="obsolete"> aspell dictionary.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</translation>
</message>
<message>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</translation>
</message>
<message>
<source> by adding it to the session list.</source>
<translation> by adding it to the session list.</translation>
</message>
<message>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</translation>
</message>
<message>
<source>Spelling check complete</source>
<translation>Spelling check complete</translation>
</message>
<message>
<source> Aspell dictionary.</source>
<translation> Aspell dictionary.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in Aspell speller configuration.</source>
<translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in Aspell speller configuration.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating Aspell speller.</source>
<translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating Aspell speller.</translation>
</message>
<message>
<source>Spell Checker</source>
<translation>Spell Checker</translation>
</message>
<message>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation>No available Aspell dictionaries found. Install some, please.</translation>
</message>
<message>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation>Do you want start from the beginning of the selection with new language selected?</translation>
</message>
<message>
<source>Spell Checker Plugin Failed to Initialise.
Configuration invalid</source>
<translation>Spell Checker Plugin Failed to Initialise.
Configuration invalid</translation>
</message>
<message>
<source>Spell Checker Plugin Failed to Initialise.</source>
<translation>Spell Checker Plugin Failed to Initialise.</translation>
</message>
<message>
<source>No Aspell dictionaries could be found.</source>
<translation>No Aspell dictionaries could be found.</translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<source>Arrows</source>
<translation>Arrows</translation>
</message>
<message>
<source>Flow Chart</source>
<translation>Flow Chart</translation>
</message>
<message>
<source>Jigsaw</source>
<translation>Jigsaw</translation>
</message>
<message>
<source>Specials</source>
<translation>Specials</translation>
</message>
<message>
<source>Default Shapes</source>
<translation>Default Shapes</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<source>&amp;Barcode Generator...</source>
<translation type="obsolete">&amp;Barcode Generator...</translation>
</message>
<message>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">Scribus frontend for Pure Postscript Barcode Writer</translation>
</message>
<message>
<source>&amp;Barcode...</source>
<translation>&amp;Barcode...</translation>
</message>
<message>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation>Scribus frontend for Pure PostScript Barcode Writer</translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<source>Error opening file: %1</source>
<translation>Error opening file: %1</translation>
</message>
<message>
<source>12 or 13 digits</source>
<translation>12 or 13 digits</translation>
</message>
<message>
<source>8 digits</source>
<translation>8 digits</translation>
</message>
<message>
<source>11 or 12 digits</source>
<translation>11 or 12 digits</translation>
</message>
<message>
<source>7 or 8 digits</source>
<translation>7 or 8 digits</translation>
</message>
<message>
<source>5 digits</source>
<translation>5 digits</translation>
</message>
<message>
<source>2 digits</source>
<translation>2 digits</translation>
</message>
<message>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>Variable number of characters, digits and any of the symbols -. *$/+%.</translation>
</message>
<message>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</translation>
</message>
<message>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>Variable number of digits and any of the symbols -$:/.+ABCD.</translation>
</message>
<message>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</translation>
</message>
<message>
<source>Variable number of digits</source>
<translation>Variable number of digits</translation>
</message>
<message>
<source>Variable number of digits and capital letters</source>
<translation>Variable number of digits and capital letters</translation>
</message>
<message>
<source>Variable number of hexadecimal characters</source>
<translation>Variable number of hexadecimal characters</translation>
</message>
<message>
<source>Barcode</source>
<translation>Barcode</translation>
</message>
<message>
<source>Barcode incomplete</source>
<translation>Barcode incomplete</translation>
</message>
<message>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</translation>
</message>
<message>
<source>Select Type</source>
<translation>Select Type</translation>
</message>
<message>
<source>Select Barcode Type</source>
<translation type="obsolete">Select Barcode Type</translation>
</message>
<message>
<source>Variable number of characters, digits and any symbols.</source>
<translation>Variable number of characters, digits and any symbols.</translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<source>Barcode Creator</source>
<translation type="obsolete">Barcode Creator</translation>
</message>
<message>
<source>Barcode</source>
<translation type="obsolete">Barcode</translation>
</message>
<message>
<source>&amp;Type:</source>
<translation>&amp;Type:</translation>
</message>
<message>
<source>Select one of the available barcode type here</source>
<translation>Select one of the available barcode type here</translation>
</message>
<message>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>The numeric representation of the code itself. See the help message below</translation>
</message>
<message>
<source>Reset the barcode samples</source>
<translation>Reset the barcode samples</translation>
</message>
<message>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">&amp;Include text in barcode</translation>
</message>
<message>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<source>If checked, there will be numbers in the barcode too</source>
<translation>If checked, there will be numbers in the barcode too</translation>
</message>
<message>
<source>&amp;Guard whitespace</source>
<translation type="obsolete">&amp;Guard whitespace</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>Draw arrows to be sure of space next the code</source>
<translation>Draw arrows to be sure of space next the code</translation>
</message>
<message>
<source>Colors</source>
<translation>Colours</translation>
</message>
<message>
<source>&amp;Background</source>
<translation>&amp;Background</translation>
</message>
<message>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<source>Background color - under the code lines</source>
<translation>Background colour - under the code lines</translation>
</message>
<message>
<source>&amp;Lines</source>
<translation>&amp;Lines</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Color of the lines in barcode</source>
<translation>Colour of the lines in barcode</translation>
</message>
<message>
<source>&amp;Text</source>
<translation>&amp;Text</translation>
</message>
<message>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<source>Color of the text and numbers</source>
<translation>Colour of the text and numbers</translation>
</message>
<message>
<source>Hints and help is shown here</source>
<translation>Hints and help is shown here</translation>
</message>
<message>
<source>Preview of the result. 72dpi sample.</source>
<translation type="obsolete">Preview of the result. 72dpi sample.</translation>
</message>
<message>
<source>Co&amp;de:</source>
<translation>Co&amp;de:</translation>
</message>
<message>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">I&amp;nclude checksum</translation>
</message>
<message>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<source>Generate and include a checksum in barcode</source>
<translation>Generate and include a checksum in barcode</translation>
</message>
<message>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">Incl&amp;ude checksum digit</translation>
</message>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>Include the checksum digit in the barcode text</source>
<translation>Include the checksum digit in the barcode text</translation>
</message>
<message>
<source>Insert Barcode</source>
<translation>Insert Barcode</translation>
</message>
<message>
<source>Format</source>
<translation>Format</translation>
</message>
<message>
<source>Incl&amp;ude Checksum Digit</source>
<translation>Incl&amp;ude Checksum Digit</translation>
</message>
<message>
<source>I&amp;nclude Checksum</source>
<translation>I&amp;nclude Checksum</translation>
</message>
<message>
<source>&amp;Guard Whitespace</source>
<translation>&amp;Guard Whitespace</translation>
</message>
<message>
<source>&amp;Include Text in Barcode</source>
<translation>&amp;Include Text in Barcode</translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<source>Scrapbook</source>
<translation>Scrapbook</translation>
</message>
<message>
<source>Delete</source>
<translation>Delete</translation>
</message>
<message>
<source>Object</source>
<translation>Object</translation>
</message>
<message>
<source>New Entry</source>
<translation>New Entry</translation>
</message>
<message>
<source>Rename</source>
<translation>Rename</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation type="obsolete">Name &quot;%1&quot; is not unique.
Please choose another.</translation>
</message>
<message>
<source>Choose a Scrapbook Directory</source>
<translation>Choose a Scrapbook Directory</translation>
</message>
<message>
<source>Choose a Directory</source>
<translation type="obsolete">Choose a Directory</translation>
</message>
<message>
<source>Choose a scrapbook file to import</source>
<translation>Choose a scrapbook file to import</translation>
</message>
<message>
<source>Create a new scrapbook page</source>
<translation>Create a new scrapbook page</translation>
</message>
<message>
<source>Load an existing scrapbook</source>
<translation type="obsolete">Load an existing scrapbook</translation>
</message>
<message>
<source>Save the selected scrapbook</source>
<translation type="obsolete">Save the selected scrapbook</translation>
</message>
<message>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation type="obsolete">Import an scrapbook file from Scribus &lt;=1.3.2</translation>
</message>
<message>
<source>Close the selected scrapbook</source>
<translation>Close the selected scrapbook</translation>
</message>
<message>
<source>Copy To:</source>
<translation>Copy To:</translation>
</message>
<message>
<source>Move To:</source>
<translation>Move To:</translation>
</message>
<message>
<source>Main</source>
<translation>Main</translation>
</message>
<message>
<source>Copied Items</source>
<translation>Copied Items</translation>
</message>
<message>
<source>New Name</source>
<translation>New Name</translation>
</message>
<message>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>Scrapbook (*.scs *.SCS)</translation>
</message>
<message>
<source>Paste to Page</source>
<translation>Paste to Page</translation>
</message>
<message>
<source>Save as...</source>
<translation type="obsolete">Save as...</translation>
</message>
<message>
<source>Close</source>
<translation>Close</translation>
</message>
<message>
<source>Delete Contents</source>
<translation>Delete Contents</translation>
</message>
<message>
<source>Do you really want to delete all entries?</source>
<translation>Do you really want to delete all entries?</translation>
</message>
<message>
<source>Import a scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Import a scrapbook file from Scribus &lt;=1.3.2</translation>
</message>
<message>
<source>Hide Images</source>
<translation>Hide Images</translation>
</message>
<message>
<source>Hide Vector files</source>
<translation>Hide Vector files</translation>
</message>
<message>
<source>Go up one Directory</source>
<translation>Go up one Directory</translation>
</message>
<message>
<source>Configure the scrapbook</source>
<translation>Configure the scrapbook</translation>
</message>
<message>
<source>Hide Directories</source>
<translation>Hide Directories</translation>
</message>
<message>
<source>Open Directories in a new tab</source>
<translation>Open Directories in a new tab</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<source>Bookmarks</source>
<translation>Bookmarks</translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<source>Icon Placement</source>
<translation>Icon Placement</translation>
</message>
<message>
<source>Layout:</source>
<translation>Layout:</translation>
</message>
<message>
<source>Caption only</source>
<translation>Caption only</translation>
</message>
<message>
<source>Icon only</source>
<translation>Icon only</translation>
</message>
<message>
<source>Caption below Icon</source>
<translation>Caption below Icon</translation>
</message>
<message>
<source>Caption above Icon</source>
<translation>Caption above Icon</translation>
</message>
<message>
<source>Caption right to Icon</source>
<translation>Caption right to Icon</translation>
</message>
<message>
<source>Caption left to Icon</source>
<translation>Caption left to Icon</translation>
</message>
<message>
<source>Caption overlays Icon</source>
<translation>Caption overlays Icon</translation>
</message>
<message>
<source>Scale:</source>
<translation>Scale:</translation>
</message>
<message>
<source>Always</source>
<translation>Always</translation>
</message>
<message>
<source>When Icon is too big</source>
<translation>When Icon is too big</translation>
</message>
<message>
<source>Never</source>
<translation>Never</translation>
</message>
<message>
<source>Scale How:</source>
<translation>Scale How:</translation>
</message>
<message>
<source>Proportional</source>
<translation>Proportional</translation>
</message>
<message>
<source>Non Proportional</source>
<translation>Non Proportional</translation>
</message>
<message>
<source>Icon</source>
<translation>Icon</translation>
</message>
<message>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<source>Cancel</source>
<translation>Cancel</translation>
</message>
<message>
<source>Reset</source>
<translation>Reset</translation>
</message>
<message>
<source>When Icon is too small</source>
<translation>When Icon is too small</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<source>System Profiles</source>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<source>Rendering Intents</source>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<source>Monitor profile can only be changed when no document are currently opened.</source>
<translation type="obsolete">Monitor profile can only be changed when no document are currently opened.</translation>
</message>
<message>
<source>Monitor profiles can only be changed when no documents are currently opened.</source>
<translation>Monitor profiles can only be changed when no documents are currently opened.</translation>
</message>
<message>
<source>Perceptual</source>
<translation>Perceptual</translation>
</message>
<message>
<source>Relative Colorimetric</source>
<translation>Relative Colourimetric</translation>
</message>
<message>
<source>Saturation</source>
<translation>Saturation</translation>
</message>
<message>
<source>Absolute Colorimetric</source>
<translation>Absolute Colourimetric</translation>
</message>
<message>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="obsolete">Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="obsolete">Method of showing colours on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<source>&amp;Activate Color Management</source>
<translation type="obsolete">&amp;Activate Colour Management</translation>
</message>
<message>
<source>&amp;Monitor:</source>
<translation type="obsolete">&amp;Monitor:</translation>
</message>
<message>
<source>P&amp;rinter:</source>
<translation type="obsolete">P&amp;rinter:</translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="obsolete">Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="obsolete">Use &amp;Blackpoint Compensation</translation>
</message>
<message>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">&amp;RGB Pictures:</translation>
</message>
<message>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">&amp;CMYK Pictures:</translation>
</message>
<message>
<source>Default color profile for imported CMYK images</source>
<translation type="obsolete">Default colour profile for imported CMYK images</translation>
</message>
<message>
<source>Default color profile for imported RGB images</source>
<translation type="obsolete">Default colour profile for imported RGB images</translation>
</message>
<message>
<source>&amp;RGB Solid Colors:</source>
<translation type="obsolete">&amp;RGB Solid Colours:</translation>
</message>
<message>
<source>&amp;CMYK Solid Colors:</source>
<translation type="obsolete">&amp;CMYK Solid Colours:</translation>
</message>
<message>
<source>Pictures:</source>
<translation type="obsolete">Pictures:</translation>
</message>
<message>
<source>Sol&amp;id Colors:</source>
<translation type="obsolete">Sol&amp;id Colours:</translation>
</message>
<message>
<source>Convert all colors to printer space</source>
<translation type="obsolete">Convert all colours to printer space</translation>
</message>
<message>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="obsolete">Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="obsolete">Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for solid colours. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for images. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="obsolete">Simulate a full colour managed environment :
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<source>Images:</source>
<translation type="obsolete">Images:</translation>
</message>
</context>
<context>
<name>CMSPrefsBase</name>
<message>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<source>&amp;Activate Color Management</source>
<translation>&amp;Activate Colour Management</translation>
</message>
<message>
<source>System Profiles</source>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<source>&amp;RGB Images:</source>
<translation>&amp;RGB Images:</translation>
</message>
<message>
<source>Default color profile for imported RGB images</source>
<translation>Default colour profile for imported RGB images</translation>
</message>
<message>
<source>&amp;CMYK Images:</source>
<translation>&amp;CMYK Images:</translation>
</message>
<message>
<source>Default color profile for imported CMYK images</source>
<translation>Default colour profile for imported CMYK images</translation>
</message>
<message>
<source>&amp;RGB Solid Colors:</source>
<translation>&amp;RGB Solid Colours:</translation>
</message>
<message>
<source>Default color profile for solid RGB colors on the page</source>
<translation>Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<source>&amp;CMYK Solid Colors:</source>
<translation>&amp;CMYK Solid Colours:</translation>
</message>
<message>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<source>Document Options</source>
<translation>Document Options</translation>
</message>
<message>
<source>Simulate printer on Screen</source>
<translation>Simulate printer on Screen</translation>
</message>
<message>
<source>Monitor Profile</source>
<translation>Monitor Profile</translation>
</message>
<message>
<source>&amp;Monitor:</source>
<translation>&amp;Monitor:</translation>
</message>
<message>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<source>P&amp;rinter:</source>
<translation>P&amp;rinter:</translation>
</message>
<message>
<source>Document Profiles</source>
<translation>Document Profiles</translation>
</message>
<message>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<source>Rendering Intents</source>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<source>Images:</source>
<translation>Images:</translation>
</message>
<message>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for images. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Sol&amp;id Colors:</source>
<translation>Sol&amp;id Colours:</translation>
</message>
<message>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Default rendering intent for solid colours. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation>Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation>Simulate a full colour managed environment :
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<source>Convert all colors to printer space</source>
<translation>Convert all colours to printer space</translation>
</message>
<message>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>Method of showing colours on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<source>Mark Colors out of &amp;Gamut</source>
<translation>Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<source>Document Rendering Intents</source>
<translation>Document Rendering Intents</translation>
</message>
<message>
<source>Use &amp;Blackpoint Compensation</source>
<translation>Use &amp;Blackpoint Compensation</translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<source>Edit Color</source>
<translation>Edit Colour</translation>
</message>
<message>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<source>Web Safe RGB</source>
<translation>Web Safe RGB</translation>
</message>
<message>
<source>New</source>
<translation>New</translation>
</message>
<message>
<source>Old</source>
<translation>Old</translation>
</message>
<message>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<source>Dynamic Color Bars</source>
<translation>Dynamic Colour Bars</translation>
</message>
<message>
<source>Static Color Bars</source>
<translation>Static Colour Bars</translation>
</message>
<message>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-Colourmap</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>&amp;Name:</translation>
</message>
<message>
<source>Color &amp;Model</source>
<translation>Colour &amp;Model</translation>
</message>
<message>
<source>Is Spot Color</source>
<translation>Is Spot Colour</translation>
</message>
<message>
<source>Is Registration Color</source>
<translation type="obsolete">Is Registration Colour</translation>
</message>
<message>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>You cannot create a colour named &quot;%1&quot;.
It is a reserved name for transparent colour</translation>
</message>
<message>
<source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
<translation type="obsolete">Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</translation>
</message>
<message>
<source>The name of the color already exists,
please choose another one.</source>
<translation>The name of the colour already exists,
please choose another one.</translation>
</message>
<message>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation>Choosing this will make this colour a spot colour, thus creating another spot when creating plates or separations. This is used most often when a logo or other colour needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</translation>
</message>
<message>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Colour Management.</translation>
</message>
<message>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>You cannot create a colour without a namePlease give it a name</translation>
</message>
<message>
<source>HSV Color Map</source>
<translation>HSV Colour Map</translation>
</message>
<message>
<source>Scribus Swatches</source>
<translation>Scribus Swatches</translation>
</message>
<message>
<source>User Swatches</source>
<translation>User Swatches</translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<source>Merging colors</source>
<translation>Merging colours</translation>
</message>
<message>
<source>Error: </source>
<translation>Error: </translation>
</message>
<message>
<source>Color %1 exists already!</source>
<translation>Colour %1 exists already!</translation>
</message>
<message>
<source>Color %1 appended.</source>
<translation>Colour %1 appended.</translation>
</message>
<message>
<source>Now opening the color manager.</source>
<translation>Now opening the colour manager.</translation>
</message>
<message>
<source>Color Merging</source>
<translation>Colour Merging</translation>
</message>
<message>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>Unable to find the requested colour. You have probably selected black, grey or white. There is no way to process this colour.</translation>
</message>
<message>
<source>Color Wheel</source>
<translation>Colour Wheel</translation>
</message>
<message>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>Click the wheel to get the base colour. Its colour model depends on the chosen tab.</translation>
</message>
<message>
<source>Result Colors</source>
<translation>Result Colours</translation>
</message>
<message>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<source>Colors of your chosen color scheme.</source>
<translation>Colours of your chosen colour scheme.</translation>
</message>
<message>
<source>Color Scheme Method</source>
<translation>Colour Scheme Method</translation>
</message>
<message>
<source>Angle:</source>
<translation>Angle:</translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation>Merge created colours into the document colours</translation>
</message>
<message>
<source>&amp;Merge</source>
<translation>&amp;Merge</translation>
</message>
<message>
<source>Alt+M</source>
<translation>Alt+M</translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation>Replace created colours in the document colours</translation>
</message>
<message>
<source>&amp;Replace</source>
<translation>&amp;Replace</translation>
</message>
<message>
<source>Alt+R</source>
<translation>Alt+R</translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation>Leave colours untouched</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>&amp;Cancel</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Preview:</source>
<translation>Preview:</translation>
</message>
<message>
<source>Sample color scheme.</source>
<translation>Sample colour scheme.</translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>Simulate common vision defects here. Select type of the defect.</translation>
</message>
<message>
<source>Vision Defect Type:</source>
<translation>Vision Defect Type:</translation>
</message>
<message>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<source>HSV:</source>
<translation>HSV:</translation>
</message>
<message>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<source>S:</source>
<translation>S:</translation>
</message>
<message>
<source>V:</source>
<translation>V:</translation>
</message>
<message>
<source>Document</source>
<translation>Document</translation>
</message>
</context>
<context>
<name>Canvas</name>
<message>
<source>X: %1
Y: %2</source>
<translation>X: %1
Y: %2</translation>
</message>
<message>
<source>X: %1</source>
<translation>X: %1</translation>
</message>
<message>
<source>Y: %1</source>
<translation>Y: %1</translation>
</message>
<message>
<source>Length: %1
Angle: %2</source>
<translation>Length: %1
Angle: %2</translation>
</message>
<message>
<source>Width: %1
Height: %2</source>
<translation>Width: %1
Height: %2</translation>
</message>
<message>
<source>Angle: %1</source>
<translation>Angle: %1</translation>
</message>
</context>
<context>
<name>CanvasMode_EyeDropper</name>
<message>
<source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
<translation>The selected colour does not exist in the document&apos;s colour set. Please enter a name for this new colour.</translation>
</message>
<message>
<source>Color Not Found</source>
<translation>Colour Not Found</translation>
</message>
<message>
<source>The name you have selected already exists. Please enter a different name for this new color.</source>
<translation>The name you have selected already exists. Please enter a different name for this new colour.</translation>
</message>
</context>
<context>
<name>CanvasMode_FrameLinks</name>
<message>
<source>Linking Text Frames</source>
<translation>Linking Text Frames</translation>
</message>
<message>
<source>Before</source>
<translation>Before</translation>
</message>
<message>
<source>After</source>
<translation>After</translation>
</message>
</context>
<context>
<name>CanvasMode_Normal</name>
<message>
<source>All Supported Formats</source>
<translation>All Supported Formats</translation>
</message>
<message>
<source>Open</source>
<translation>Open</translation>
</message>
<message>
<source>Overflow Characters: %1</source>
<translation>Overflow Characters: %1</translation>
</message>
<message>
<source>Go to Page %1</source>
<translation>Go to Page %1</translation>
</message>
<message>
<source>Go to URL %1</source>
<translation>Go to URL %1</translation>
</message>
<message>
<source>Go to Page %1 in File %2</source>
<translation>Go to Page %1 in File %2</translation>
</message>
<message>
<source>Page %1 does not exist!</source>
<translation>Page %1 does not exist!</translation>
</message>
<message>
<source>Link Target is Web URL.
URL: %1</source>
<translation>Link Target is Web URL.
URL: %1</translation>
</message>
<message>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
<source>Link Target is external File.
File: %1
Page: %2</source>
<translation>Link Target is external File.
File: %1
Page: %2</translation>
</message>
</context>
<context>
<name>CellStyleComboBox</name>
<message>
<source>No Style</source>
<translation>No Style</translation>
</message>
</context>
<context>
<name>CgmPlug</name>
<message>
<source>Importing: %1</source>
<translation>Importing: %1</translation>
</message>
<message>
<source>Analyzing File:</source>
<translation>Analysing File:</translation>
</message>
<message>
<source>Group%1</source>
<translation type="obsolete">Group%1</translation>
</message>
<message>
<source>Generating Items</source>
<translation>Generating Items</translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<source>Font:</source>
<translation type="obsolete">Font:</translation>
</message>
<message>
<source>Character Class:</source>
<translation type="obsolete">Character Class:</translation>
</message>
<message>
<source>&amp;Insert</source>
<translation type="obsolete">&amp;Insert</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="obsolete">C&amp;lear</translation>
</message>
<message>
<source>Insert the characters at the cursor in the text</source>
<translation type="obsolete">Insert the characters at the cursor in the text</translation>
</message>
<message>
<source>Delete the current selection(s).</source>
<translation type="obsolete">Delete the current selection(s).</translation>
</message>
<message>
<source>Full Character Set</source>
<translation type="obsolete">Full Character Set</translation>
</message>
<message>
<source>Basic Latin</source>
<translation type="obsolete">Basic Latin</translation>
</message>
<message>
<source>Latin-1 Supplement</source>
<translation type="obsolete">Latin-1 Supplement</translation>
</message>
<message>
<source>Latin Extended-A</source>
<translation type="obsolete">Latin Extended-A</translation>
</message>
<message>
<source>Latin Extended-B</source>
<translation type="obsolete">Latin Extended-B</translation>
</message>
<message>
<source>General Punctuation</source>
<translation type="obsolete">General Punctuation</translation>
</message>
<message>
<source>Super- and Subscripts</source>
<translation type="obsolete">Super- and Subscripts</translation>
</message>
<message>
<source>Currency Symbols</source>
<translation type="obsolete">Currency Symbols</translation>
</message>
<message>
<source>Letterlike Symbols</source>
<translation type="obsolete">Letterlike Symbols</translation>
</message>
<message>
<source>Number Forms</source>
<translation type="obsolete">Number Forms</translation>
</message>
<message>
<source>Arrows</source>
<translation type="obsolete">Arrows</translation>
</message>
<message>
<source>Mathematical Operators</source>
<translation type="obsolete">Mathematical Operators</translation>
</message>
<message>
<source>Box Drawing</source>
<translation type="obsolete">Box Drawing</translation>
</message>
<message>
<source>Block Elements</source>
<translation type="obsolete">Block Elements</translation>
</message>
<message>
<source>Geometric Shapes</source>
<translation type="obsolete">Geometric Shapes</translation>
</message>
<message>
<source>Miscellaneous Symbols</source>
<translation type="obsolete">Miscellaneous Symbols</translation>
</message>
<message>
<source>Dingbats</source>
<translation type="obsolete">Dingbats</translation>
</message>
<message>
<source>Small Form Variants</source>
<translation type="obsolete">Small Form Variants</translation>
</message>
<message>
<source>Ligatures</source>
<translation type="obsolete">Ligatures</translation>
</message>
<message>
<source>Specials</source>
<translation type="obsolete">Specials</translation>
</message>
<message>
<source>Greek</source>
<translation type="obsolete">Greek</translation>
</message>
<message>
<source>Greek Extended</source>
<translation type="obsolete">Greek Extended</translation>
</message>
<message>
<source>Cyrillic</source>
<translation type="obsolete">Cyrillic</translation>
</message>
<message>
<source>Cyrillic Supplement</source>
<translation type="obsolete">Cyrillic Supplement</translation>
</message>
<message>
<source>Arabic</source>
<translation type="obsolete">Arabic</translation>
</message>
<message>
<source>Arabic Extended A</source>
<translation type="obsolete">Arabic Extended A</translation>
</message>
<message>
<source>Arabic Extended B</source>
<translation type="obsolete">Arabic Extended B</translation>
</message>
<message>
<source>Hebrew</source>
<translation type="obsolete">Hebrew</translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</translation>
</message>
<message>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation>Scribus Char Palette (*.ucp);;All Files (*)</translation>
</message>
<message>
<source>Enhanced Palette</source>
<translation type="obsolete">Enhanced Palette</translation>
</message>
<message>
<source>Quick Palette</source>
<translation type="obsolete">Quick Palette</translation>
</message>
<message>
<source>Hide Enhanced</source>
<translation type="obsolete">Hide Enhanced</translation>
</message>
<message>
<source>Choose a filename to open</source>
<translation>Choose a filename to open</translation>
</message>
<message>
<source>Error</source>
<translation>Error</translation>
</message>
<message>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation>Error reading file %1 - file is corrupted propably.</translation>
</message>
<message>
<source>Choose a filename to save under</source>
<translation type="obsolete">Choose a filename to save under</translation>
</message>
<message>
<source>Cannot write file %1</source>
<translation>Cannot write file %1</translation>
</message>
<message>
<source>Clean the Palette?</source>
<translation type="obsolete">Clean the Palette?</translation>
</message>
<message>
<source>You will clean all characters from this palette. Are you sure?</source>
<translation type="obsolete">You will clean all characters from this palette. Are you sure?</translation>
</message>
<message>
<source>Character Palette</source>
<translation>Character Palette</translation>
</message>
<message>
<source>&amp;Search</source>
<translation type="obsolete">&amp;Search</translation>
</message>
<message>
<source>Empty the Palette?</source>
<translation>Empty the Palette?</translation>
</message>
<message>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation>You will remove all characters from this palette. Are you sure?</translation>
</message>
<message>
<source>Hide/Show Enhanced Palette</source>
<translation>Hide/Show Enhanced Palette</translation>
</message>
<message>
<source>Save Quick Character Palette</source>
<translation>Save Quick Character Palette</translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">You can see a thumbnail if you press and hold down the right mouse button.The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</translation>
</message>
</context>
<context>
<name>CharSelectEnhanced</name>
<message>
<source>Full Character Set</source>
<translation>Full Character Set</translation>
</message>
<message>
<source>Basic Latin</source>
<translation>Basic Latin</translation>
</message>
<message>
<source>Latin-1 Supplement</source>
<translation>Latin-1 Supplement</translation>
</message>
<message>
<source>Latin Extended-A</source>
<translation>Latin Extended-A</translation>
</message>
<message>
<source>Latin Extended-B</source>
<translation>Latin Extended-B</translation>
</message>
<message>
<source>General Punctuation</source>
<translation>General Punctuation</translation>
</message>
<message>
<source>Super- and Subscripts</source>
<translation>Super- and Subscripts</translation>
</message>
<message>
<source>Currency Symbols</source>
<translation>Currency Symbols</translation>
</message>
<message>
<source>Letterlike Symbols</source>
<translation>Letterlike Symbols</translation>
</message>
<message>
<source>Number Forms</source>
<translation>Number Forms</translation>
</message>
<message>
<source>Arrows</source>
<translation>Arrows</translation>
</message>
<message>
<source>Mathematical Operators</source>
<translation>Mathematical Operators</translation>
</message>
<message>
<source>Box Drawing</source>
<translation>Box Drawing</translation>
</message>
<message>
<source>Block Elements</source>
<translation>Block Elements</translation>
</message>
<message>
<source>Geometric Shapes</source>
<translation>Geometric Shapes</translation>
</message>
<message>
<source>Miscellaneous Symbols</source>
<translation>Miscellaneous Symbols</translation>
</message>
<message>
<source>Dingbats</source>
<translation>Dingbats</translation>
</message>
<message>
<source>Small Form Variants</source>
<translation>Small Form Variants</translation>
</message>
<message>
<source>Ligatures</source>
<translation>Ligatures</translation>
</message>
<message>
<source>Specials</source>
<translation>Specials</translation>
</message>
<message>
<source>Greek</source>
<translation>Greek</translation>
</message>
<message>
<source>Greek Extended</source>
<translation>Greek Extended</translation>
</message>
<message>
<source>Cyrillic</source>
<translation>Cyrillic</translation>
</message>
<message>
<source>Cyrillic Supplement</source>
<translation>Cyrillic Supplement</translation>
</message>
<message>
<source>Arabic</source>
<translation>Arabic</translation>
</message>
<message>
<source>Arabic Extended A</source>
<translation>Arabic Extended A</translation>
</message>
<message>
<source>Arabic Extended B</source>
<translation>Arabic Extended B</translation>
</message>
<message>
<source>Hebrew</source>
<translation>Hebrew</translation>
</message>
<message>
<source>Enhanced Character Palette</source>
<translation>Enhanced Character Palette</translation>
</message>
<message>
<source>&amp;Font:</source>
<translation>&amp;Font:</translation>
</message>
<message>
<source>C&amp;haracter Class:</source>
<translation>C&amp;haracter Class:</translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</translation>
</message>
<message>
<source>Insert &amp;Code:</source>
<translation>Insert &amp;Code:</translation>
</message>
<message>
<source>Type in a four digit unicode value directly here</source>
<translation type="obsolete">Type in a four digit unicode value directly here</translation>
</message>
<message>
<source>Glyphs to Insert</source>
<translation>Glyphs to Insert</translation>
</message>
<message>
<source>Insert the characters at the cursor in the text</source>
<translation>Insert the characters at the cursor in the text</translation>
</message>
<message>
<source>&amp;Insert</source>
<translation>&amp;Insert</translation>
</message>
<message>
<source>Delete the current selection(s).</source>
<translation>Delete the current selection(s).</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>C&amp;lear</translation>
</message>
<message>
<source>Type in a four digit Unicode value directly here</source>
<translation>Type in a four digit Unicode value directly here</translation>
</message>
</context>
<context>
<name>CharStyleComboBox</name>
<message>
<source>No Style</source>
<translation>No Style</translation>
</message>
</context>
<context>
<name>CharTableView</name>
<message>
<source>Delete</source>
<translation>Delete</translation>
</message>
</context>
<context>
<name>CheckDocument</name>
<message>
<source>Glyphs missing</source>
<translation>Glyphs missing</translation>
</message>
<message>
<source>Text overflow</source>
<translation>Text overflow</translation>
</message>
<message>
<source>Object is not on a Page</source>
<translation>Object is not on a Page</translation>
</message>
<message>
<source>Missing Image</source>
<translation>Missing Image</translation>
</message>
<message>
<source>Object has transparency</source>
<translation>Object has transparency</translation>
</message>
<message>
<source>Object is a PDF Annotation or Field</source>
<translation>Object is a PDF Annotation or Field</translation>
</message>
<message>
<source>Object is a placed PDF</source>
<translation>Object is a placed PDF</translation>
</message>
<message>
<source>Document</source>
<translation>Document</translation>
</message>
<message>
<source>No Problems found</source>
<translation>No Problems found</translation>
</message>
<message>
<source>Page </source>
<translation>Page </translation>
</message>
<message>
<source>Free Objects</source>
<translation>Free Objects</translation>
</message>
<message>
<source>Problems found</source>
<translation type="obsolete">Problems found</translation>
</message>
<message>
<source>Preflight Verifier</source>
<translation>Preflight Verifier</translation>
</message>
<message>
<source>Items</source>
<translation>Items</translation>
</message>
<message>
<source>Problems</source>
<translation>Problems</translation>
</message>
<message>
<source>Current Profile:</source>
<translation>Current Profile:</translation>
</message>
<message>
<source>&amp;Ignore Errors</source>
<translation>&amp;Ignore Errors</translation>
</message>
<message>
<source>Check again</source>
<translation>Check again</translation>
</message>
<message>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">Image resolution below %1 DPI, currently %2 x %3 DPI</translation>
</message>
<message>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">Image resolution above %1 DPI, currently %2 x %3 DPI</translation>
</message>
<message>
<source>Image is GIF</source>
<translation>Image is GIF</translation>
</message>
<message>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<source>Transparency used</source>
<translation>Transparency used</translation>
</message>
<message>
<source>Blendmode used</source>
<translation>Blendmode used</translation>
</message>
<message>
<source>Layer &quot;%1&quot;</source>
<translation>Layer &quot;%1&quot;</translation>
</message>
<message>
<source>Annotation uses a non TrueType font</source>
<translation>Annotation uses a non TrueType font</translation>
</message>
<message>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</translation>
</message>
<message>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</translation>
</message>
<message>
<source>Rerun the document scan to check corrections you may have made</source>
<translation>Rerun the document scan to check corrections you may have made</translation>
</message>
<message>
<source>Empty Image Frame</source>
<translation>Empty Image Frame</translation>
</message>
<message>
<source>Layers</source>
<translation>Layers</translation>
</message>
<message>
<source>Print/Visible Mismatch</source>
<translation>Print/Visible Mismatch</translation>
</message>
<message>
<source>Issue(s): %1</source>
<translation></translation>
</message>
<message>
<source>Master Pages</source>
<translation>Master Pages</translation>
</message>
<message>
<source>Layer</source>
<translation>Layer</translation>
</message>
<message>
<source>Image resolution below %1 DPI,
currently %2 x %3 DPI</source>
<translation>Image resolution below %1 DPI,
currently %2 x %3 DPI</translation>
</message>
<message>
<source>Image resolution above %1 DPI,
currently %2 x %3 DPI</source>
<translation>Image resolution above %1 DPI,
currently %2 x %3 DPI</translation>
</message>
<message>
<source>Image dimension is smaller than its frame</source>
<translation>Image dimension is smaller than its frame</translation>
</message>
<message>
<source>After Marks update document was changed</source>
<translation>After Marks update document was changed</translation>
</message>
</context>
<context>
<name>ClockWidget</name>
<message>
<source>A</source>
<translation>A</translation>
</message>
</context>
<context>
<name>CollectForOutput</name>
<message>
<source>Choose a Directory</source>
<translation>Choose a Directory</translation>
</message>
<message>
<source>Cannot create directory:
%1</source>
<translation>Cannot create directory:
%1</translation>
</message>
<message>
<source>Collecting...</source>
<translation>Collecting...</translation>
</message>
<message>
<source>Cannot collect all files for output for file:
%1</source>
<translation>Cannot collect all files for output for file:
%1</translation>
</message>
<message>
<source>Cannot collect the file:
%1</source>
<translation>Cannot collect the file:
%1</translation>
</message>
</context>
<context>
<name>CollectForOutput_UI</name>
<message>
<source>Collecting Items:</source>
<translation>Collecting Items:</translation>
</message>
<message>
<source>Collecting Patterns:</source>
<translation>Collecting Patterns:</translation>
</message>
<message>
<source>Collecting Fonts:</source>
<translation>Collecting Fonts:</translation>
</message>
<message>
<source>Collecting Profiles:</source>
<translation>Collecting Profiles:</translation>
</message>
<message>
<source>Collecting...</source>
<translation>Collecting...</translation>
</message>
<message>
<source>Cannot collect all files for output for file:
%1</source>
<translation>Cannot collect all files for output for file:
%1</translation>
</message>
<message>
<source>Cannot collect the file:
%1</source>
<translation>Cannot collect the file:
%1</translation>