Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 23790 → Rev 23791

/trunk/Scribus/resources/translations/scribus.en_US.ts
13764,174 → 13764,174
</message>
</context>
<context>
<name>PPreview</name>
<name>PrintPreview</name>
<message>
<location filename="../../scribus/ui/preview.cpp" line="84"/>
<location filename="../../scribus/ui/printpreview.cpp" line="84"/>
<source>Print Preview</source>
<translation>Print Preview</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="311"/>
<location filename="../../scribus/ui/printpreview.cpp" line="311"/>
<source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
<translation>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="123"/>
<location filename="../../scribus/ui/printpreview.cpp" line="123"/>
<source>Display Trans&amp;parency</source>
<translation>Display Trans&amp;parency</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="128"/>
<location filename="../../scribus/ui/printpreview.cpp" line="128"/>
<source>&amp;Display CMYK</source>
<translation>&amp;Display CMYK</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="244"/>
<location filename="../../scribus/ui/printpreview.cpp" line="244"/>
<source>&amp;Under Color Removal</source>
<translation>&amp;Under Color Removal</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="141"/>
<location filename="../../scribus/ui/printpreview.cpp" line="141"/>
<source>Separation Name</source>
<translation>Separation Name</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="152"/>
<location filename="../../scribus/ui/printpreview.cpp" line="152"/>
<source>Cyan</source>
<translation>Cyan</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="159"/>
<location filename="../../scribus/ui/printpreview.cpp" line="159"/>
<source>Magenta</source>
<translation>Magenta</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="166"/>
<location filename="../../scribus/ui/printpreview.cpp" line="166"/>
<source>Yellow</source>
<translation>Yellow</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="173"/>
<location filename="../../scribus/ui/printpreview.cpp" line="173"/>
<source>Black</source>
<translation>Black</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="226"/>
<location filename="../../scribus/ui/printpreview.cpp" line="226"/>
<source>Preview Settings</source>
<translation>Preview Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="260"/>
<location filename="../../scribus/ui/printpreview.cpp" line="260"/>
<source>Scaling:</source>
<translation>Scaling:</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="288"/>
<location filename="../../scribus/ui/printpreview.cpp" line="288"/>
<source>Print...</source>
<translation>Print...</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="312"/>
<location filename="../../scribus/ui/printpreview.cpp" line="312"/>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
<translation>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="285"/>
<location filename="../../scribus/ui/printpreview.cpp" line="285"/>
<source>Close</source>
<translation>Close</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="1144"/>
<location filename="../../scribus/ui/printpreview.cpp" line="1144"/>
<source>File</source>
<translation>File</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="118"/>
<location filename="../../scribus/ui/printpreview.cpp" line="118"/>
<source>Enable &amp;Antialiasing</source>
<translation>Enable &amp;Antialiasing</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="272"/>
<location filename="../../scribus/ui/printpreview.cpp" line="272"/>
<source>Fit to Width</source>
<translation>Fit to Width</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="273"/>
<location filename="../../scribus/ui/printpreview.cpp" line="273"/>
<source>Fit to Height</source>
<translation>Fit to Height</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="274"/>
<location filename="../../scribus/ui/printpreview.cpp" line="274"/>
<source>Fit to Page</source>
<translation>Fit to Page</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="309"/>
<location filename="../../scribus/ui/printpreview.cpp" line="309"/>
<source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
<translation>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="112"/>
<location filename="../../scribus/ui/printpreview.cpp" line="112"/>
<source>Display Settings</source>
<translation>Display Settings</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="232"/>
<location filename="../../scribus/ui/printpreview.cpp" line="232"/>
<source>Mirror Page(s) Horizontal</source>
<translation>Mirror Page(s) Horizontal</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="235"/>
<location filename="../../scribus/ui/printpreview.cpp" line="235"/>
<source>Mirror Page(s) Vertical</source>
<translation>Mirror Page(s) Vertical</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="241"/>
<location filename="../../scribus/ui/printpreview.cpp" line="241"/>
<source>Print in Grayscale</source>
<translation>Print in Grayscale</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="247"/>
<location filename="../../scribus/ui/printpreview.cpp" line="247"/>
<source>Convert Spot Colors</source>
<translation>Convert Spot Colors</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="314"/>
<location filename="../../scribus/ui/printpreview.cpp" line="314"/>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="238"/>
<location filename="../../scribus/ui/printpreview.cpp" line="238"/>
<source>Clip to Printer Margins</source>
<translation>Clip to Printer Margins</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="194"/>
<location filename="../../scribus/ui/printpreview.cpp" line="194"/>
<source>Display Ink Coverage</source>
<translation>Display Ink Coverage</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="202"/>
<location filename="../../scribus/ui/printpreview.cpp" line="202"/>
<source>Threshold:</source>
<translation>Threshold:</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="205"/>
<location filename="../../scribus/ui/printpreview.cpp" line="205"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="210"/>
<location filename="../../scribus/ui/printpreview.cpp" line="210"/>
<source>None</source>
<translation>None</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="310"/>
<location filename="../../scribus/ui/printpreview.cpp" line="310"/>
<source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</source>
<translation>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later.</translation>
</message>
<message>
<location filename="../../scribus/ui/preview.cpp" line="313"/>
<location filename="../../scribus/ui/printpreview.cpp" line="313"/>
<source>Resize the scale of the page</source>
<translation>Resize the scale of the page</translation>
</message>