Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 23285 → Rev 23286

/trunk/Scribus/resources/translations/scribus.gl.ts
746,11 → 746,6
<translation>&amp;Propiedades</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1682"/>
<source>Text Properties</source>
<translation>Propiedades do texto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1684"/>
<source>&amp;Scrapbook</source>
<translation>&amp;Portarretallos</translation>
1784,6 → 1779,11
<translation>Copiar</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1682"/>
<source>Content Properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1773"/>
<source>Cut</source>
<translation>Recortar</translation>
4072,49 → 4072,49
<context>
<name>CanvasMode_Normal</name>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1783"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1780"/>
<source>All Supported Formats</source>
<translation>Todos os formatos admitidos</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1811"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1808"/>
<source>Open</source>
<translation>Abrir</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="386"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="385"/>
<source>Go to Page %1</source>
<translation>Ir á páxina %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="388"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="387"/>
<source>Go to URL %1</source>
<translation>Ir ao URL %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="390"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="389"/>
<source>Go to Page %1 in File %2</source>
<translation>Ir á páxina %1 do ficheiro %2</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1511"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1508"/>
<source>Page %1 does not exist!</source>
<translation>A páxina %1 non existe!</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1517"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1514"/>
<source>Link Target is Web URL.
URL: %1</source>
<translation>O destino da ligazón é un URL da web. URL: %1</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1518"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1523"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1515"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1520"/>
<source>Information</source>
<translation>Información</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1522"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="1519"/>
<source>Link Target is external File.
File: %1
Page: %2</source>
4121,7 → 4121,7
<translation>O destino da ligazón é un ficheiro externo. Ficheiro: %1 Páxina: %2</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="431"/>
<location filename="../../scribus/canvasmode_normal.cpp" line="430"/>
<source>Overflow Characters: %1 (%2 White Spaces)
Click to link to existing text frame or auto-create new linked text frame</source>
<translation>Carácteres que rebordan: %1 (%2 espazos en branco)
4773,23 → 4773,23
<context>
<name>CollectForOutput</name>
<message>
<location filename="../../scribus/collect4output.cpp" line="71"/>
<location filename="../../scribus/collect4output.cpp" line="65"/>
<source>Choose a Directory</source>
<translation>Escolla un directorio</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="101"/>
<location filename="../../scribus/collect4output.cpp" line="95"/>
<source>Cannot create directory:
%1</source>
<translation>Non é posíbel crear o directorio: %1</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="115"/>
<location filename="../../scribus/collect4output.cpp" line="109"/>
<source>Collecting...</source>
<translation>A recoller...</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="119"/>
<location filename="../../scribus/collect4output.cpp" line="113"/>
<source>Cannot collect all files for output for file:
%1</source>
<translation>Non é posíbel recoller todos os ficheiros para a saída do ficheiro:
4796,7 → 4796,7
%1</translation>
</message>
<message>
<location filename="../../scribus/collect4output.cpp" line="133"/>
<location filename="../../scribus/collect4output.cpp" line="127"/>
<source>Cannot collect the file:
%1</source>
<translation>Non é posíbel recoller o ficheiro:
6035,12 → 6035,12
<translation>Configuración da previsualización</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="598"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="582"/>
<source>Paste File...</source>
<translation>Apegar un ficheiro...</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="632"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="616"/>
<source>Delete Page</source>
<translation>Eliminar páxina</translation>
</message>
6122,12 → 6122,12
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="511"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="583"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="567"/>
<source>&amp;Paste Here</source>
<translation>A&amp;pegar aquí</translation>
</message>
<message>
<location filename="../../scribus/ui/contextmenu.cpp" line="591"/>
<location filename="../../scribus/ui/contextmenu.cpp" line="575"/>
<source>Paste Recent</source>
<translation>Apegar recente</translation>
</message>
6874,44 → 6874,6
</message>
</context>
<context>
<name>DockWidget</name>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="32"/>
<source>XYZ</source>
<translation>XYZ</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="68"/>
<source>Position [X,Y]:</source>
<translation>Posición [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="87"/>
<source>Rotation:</source>
<translation>Rotación:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="168"/>
<source>Scale [X,Y]:</source>
<translation>Escala [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="251"/>
<source>Proportional</source>
<translation>Proporcional</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="270"/>
<source>Autofit</source>
<translation>Disposición automática</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz_dw.ui" line="315"/>
<source>DPI [X,Y]:</source>
<translation>PPP [X,Y]:</translation>
</message>
</context>
<context>
<name>DownloadsPalette</name>
<message>
<location filename="../../scribus/ui/downloadspalette.cpp" line="12"/>
7946,22 → 7908,22
<context>
<name>FontComboH</name>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="157"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="155"/>
<source>Family:</source>
<translation>Familia:</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="158"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="156"/>
<source>Style:</source>
<translation>Estilo:</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="160"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="158"/>
<source>Font Family of Selected Text or Text Frame</source>
<translation>Familia do tipo de letra texto ou da moldura de texto escollidos</translation>
</message>
<message>
<location filename="../../scribus/ui/fontcombo.cpp" line="161"/>
<location filename="../../scribus/ui/fontcombo.cpp" line="159"/>
<source>Font Style of Selected Text or Text Frame</source>
<translation>Estilo do tipo de letra do texto ou da moldura de texto escollidos</translation>
</message>
8237,63 → 8199,6
</message>
</context>
<context>
<name>Form</name>
<message>
<location filename="../../scribus/ui/xyz.ui" line="32"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="32"/>
<source>Form</source>
<translation>Formulario</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="70"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="70"/>
<source>Position:</source>
<translation>Posición:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="89"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="89"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="134"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="134"/>
<source>Y</source>
<translation>Y</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="169"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="169"/>
<source>Rotation:</source>
<translation>Rotación:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="231"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="231"/>
<source>Scale [X,Y]:</source>
<translation>Escala [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="314"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="314"/>
<source>Proportional</source>
<translation>Proporcional</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="333"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="333"/>
<source>Autofit</source>
<translation>Disposición automática</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz.ui" line="378"/>
<location filename="../../scribus/ui/xyz_vert.ui" line="378"/>
<source>DPI [X,Y]:</source>
<translation>PPP [X,Y]:</translation>
</message>
</context>
<context>
<name>GradientEditor</name>
<message>
<location filename="../../scribus/ui/gradienteditor.cpp" line="183"/>
8748,76 → 8653,76
<context>
<name>HelpBrowser</name>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="306"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="313"/>
<source>Scribus Online Help</source>
<translation>Axuda do Scribus na rede</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="398"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="405"/>
<source>Find</source>
<translation>Atopar</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="398"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="405"/>
<source>Search Term:</source>
<translation>Termo buscado:</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="76"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="318"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="325"/>
<source>&amp;Delete</source>
<translation>&amp;Eliminar</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="46"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="312"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="319"/>
<source>&amp;Print...</source>
<translation>Im&amp;primir...</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="308"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="315"/>
<source>&amp;File</source>
<translation>&amp;Ficheiro</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="56"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="314"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="321"/>
<source>&amp;Find...</source>
<translation>&amp;Buscar...</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="315"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="322"/>
<source>Find &amp;Next</source>
<translation>Buscar o segui&amp;nte</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="316"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="323"/>
<source>Find &amp;Previous</source>
<translation>&amp;Buscar o anterior</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="309"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="316"/>
<source>&amp;Edit</source>
<translation>&amp;Editar</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="147"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="148"/>
<source>Navigation</source>
<translation>Navegación</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="317"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="324"/>
<source>&amp;Add Bookmark</source>
<translation>Eng&amp;adir un marcador</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.ui" line="81"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="319"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="326"/>
<source>D&amp;elete All</source>
<translation>&amp;Eliminar todo</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="310"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="317"/>
<source>&amp;Bookmarks</source>
<translation>&amp;Marcadores</translation>
</message>
8848,12 → 8753,12
<translation>Eng&amp;adir</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="313"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="320"/>
<source>&amp;Quit</source>
<translation>&amp;Saír</translation>
</message>
<message>
<location filename="../../scribus/ui/helpbrowser.cpp" line="737"/>
<location filename="../../scribus/ui/helpbrowser.cpp" line="745"/>
<source>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</source>
<comment>HTML message for no documentation available to show</comment>
<translation>&lt;h2&gt;&lt;p&gt;Vaia, non hai ningún manual instalado!&lt;/p&gt;&lt;p&gt;Consulte &lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net para documentación actualizada&lt;li&gt;http://www.scribus.net para descargas&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</translation>
9669,7 → 9574,7
<translation>Todos os formatos admitidos</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdfplugin.cpp" line="215"/>
<location filename="../../scribus/plugins/import/pdf/importpdfplugin.cpp" line="191"/>
<source>The Import plugin cannot handle Postscript files</source>
<translation>O engadido de importación non pode xestionar os ficheiros en Postscript</translation>
</message>
13788,7 → 13693,7
<translation>Data:</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="10347"/>
<location filename="../../scribus/pdflib_core.cpp" line="10351"/>
<source>Failed to embed the PDF file : %1.
Please disable experimental PDF and PS embedding and try again.</source>
<translation>Non foi posíbel incorporar o ficheiro PDF: %1.
13795,27 → 13700,27
Desactive a incorporación de PDF e PS experimental e ténteo de novo.</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11529"/>
<location filename="../../scribus/pdflib_core.cpp" line="11533"/>
<source>Failed to load an image : %1</source>
<translation>Non foi posíbel cargar unha imaxe: %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11534"/>
<location filename="../../scribus/pdflib_core.cpp" line="11538"/>
<source>Failed to write an image : %1</source>
<translation>Non foi posíbel escribir unha imaxe: %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11539"/>
<location filename="../../scribus/pdflib_core.cpp" line="11543"/>
<source>Failed to load an image mask : %1</source>
<translation>Non foi posíbel cargar unha máscara de imaxe: %1</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11544"/>
<location filename="../../scribus/pdflib_core.cpp" line="11548"/>
<source>Insufficient memory for processing an image</source>
<translation>Non hai memoria dabondo para procesar unha imaxe</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="11524"/>
<location filename="../../scribus/pdflib_core.cpp" line="11528"/>
<source>A write error occurred, please check available disk space</source>
<translation>Produciuse un erro de escrita; comprobe o espazo de que dispón o disco</translation>
</message>
14072,8 → 13977,8
<translation>Símbolo</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="7587"/>
<location filename="../../scribus/pageitem.cpp" line="7588"/>
<location filename="../../scribus/pageitem.cpp" line="7597"/>
<location filename="../../scribus/pageitem.cpp" line="7598"/>
<source>Copy of</source>
<translation>Copiar de</translation>
</message>
14519,32 → 14424,32
<context>
<name>PageItem_TextFrame</name>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4987"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5000"/>
<source>Linked Text</source>
<translation>Texto ligado</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4989"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5002"/>
<source>Text Frame</source>
<translation>Moldura de texto</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="4993"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5006"/>
<source>Paragraphs: </source>
<translation>Parágrafos:</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5001"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5014"/>
<source>Lines: </source>
<translation>Liñas: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5007"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5020"/>
<source>Words: </source>
<translation>Palabras:</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="5015"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="5028"/>
<source>Chars: </source>
<translation>Caracteres:</translation>
</message>
15485,27 → 15390,27
<context>
<name>PdfPlug</name>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="192"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="167"/>
<source>Importing: %1</source>
<translation>A importar: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="195"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="170"/>
<source>Analyzing File:</source>
<translation>A analizar o ficheiro:</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="379"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="336"/>
<source>Generating Items</source>
<translation>A xerar os elementos</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="415"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="372"/>
<source>Open PDF-File</source>
<translation>Abrir ficheiro PDF</translation>
</message>
<message>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="415"/>
<location filename="../../scribus/plugins/import/pdf/importpdf.cpp" line="372"/>
<source>Password</source>
<translation>Contrasinal</translation>
</message>
22176,52 → 22081,47
<context>
<name>PropertiesPalette</name>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="856"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="813"/>
<source>Properties</source>
<translation>Propiedades</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="858"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="815"/>
<source>X, Y, &amp;Z</source>
<translation>X, Y, &amp;Z</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="861"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="817"/>
<source>&amp;Shape</source>
<translation>&amp;Forma</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="859"/>
<source>&amp;Image</source>
<translation>&amp;Imaxe</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="862"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="818"/>
<source>&amp;Line</source>
<translation>&amp;Liña</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="863"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="819"/>
<source>&amp;Colors</source>
<translation>&amp;Cores</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="864"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="820"/>
<source>&amp;Group</source>
<translation>A&amp;grupar</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="865"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="821"/>
<source>&amp;Transparency</source>
<translation>&amp;Transparencia</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="866"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="822"/>
<source>T&amp;able</source>
<translation>T&amp;áboa</translation>
</message>
<message>
<location filename="../../scribus/ui/propertiespalette.cpp" line="860"/>
<location filename="../../scribus/ui/propertiespalette.cpp" line="816"/>
<source>Drop Shadow</source>
<translation>Sombra</translation>
</message>
25498,7 → 25398,7
<translation>A inicializar...</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1268"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1269"/>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="590"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="1078"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="1204"/>
25549,7 → 25449,7
<message>
<location filename="../../scribus/gtgettext.cpp" line="204"/>
<location filename="../../scribus/scgtplugin.cpp" line="85"/>
<location filename="../../scribus/util_formats.cpp" line="325"/>
<location filename="../../scribus/util_formats.cpp" line="329"/>
<source>All Files (*)</source>
<translation>Todos os ficheiros (*)</translation>
</message>
25709,7 → 25609,7
<translation>Modelos propios</translation>
</message>
<message>
<location filename="../../scribus/gtaction.cpp" line="76"/>
<location filename="../../scribus/gtaction.cpp" line="75"/>
<source>Importing text</source>
<translation>Importación de texto</translation>
</message>
25717,7 → 25617,7
<location filename="../../scribus/fileloader.cpp" line="83"/>
<location filename="../../scribus/gtgettext.cpp" line="176"/>
<location filename="../../scribus/scgtplugin.cpp" line="66"/>
<location filename="../../scribus/util_formats.cpp" line="278"/>
<location filename="../../scribus/util_formats.cpp" line="282"/>
<source>All Supported Formats</source>
<translation>Todos os formatos coñecidos</translation>
</message>
28417,7 → 28317,7
<translation>A unidade está fóra do intervalo. Empregue unha das constantes scribus.UNIT_*.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="32"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="31"/>
<source>Target is not an image frame.</source>
<comment>python error</comment>
<translation>O obxectivo non é unha moldura de imaxe.</translation>
28555,8 → 28455,8
<translation>O atributo «allTypes» é de SÓ-LECTURA</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="165"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="199"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="167"/>
<location filename="../../scribus/plugins/scriptplugin/objimageexport.cpp" line="203"/>
<source>Failed to export image</source>
<comment>python error</comment>
<translation>Non se logrou exportar a imaxe</translation>
28596,17 → 28496,17
<translation>Non se atopou a cor nas cores predeterminadas.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="435"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="434"/>
<source>Cannot scale by 0%.</source>
<comment>python error</comment>
<translation>Non é posíbel reducir a un 0%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="94"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="137"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="181"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="209"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="51"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="93"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="136"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="180"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="208"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="543"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="570"/>
<source>Specified item not an image frame.</source>
28627,53 → 28527,53
<translation>Non é posíbel exhibir unha mostra baleira.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="169"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="200"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="273"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="304"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="335"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="366"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="458"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="489"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="520"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="551"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="582"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="613"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="644"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="676"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="168"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="199"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="272"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="303"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="334"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="365"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="457"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="488"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="519"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="550"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="581"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="612"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="643"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="675"/>
<source>Cannot have an empty layer name.</source>
<comment>python error</comment>
<translation>Non é posíbel ter un nome de capa en branco.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="177"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="257"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="288"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="319"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="350"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="381"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="412"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="443"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="474"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="505"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="536"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="567"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="598"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="629"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="660"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="707"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="176"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="256"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="287"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="318"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="349"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="380"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="411"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="442"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="473"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="504"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="535"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="566"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="597"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="628"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="659"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="706"/>
<source>Layer not found.</source>
<comment>python error</comment>
<translation>Non se atopou a capa.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="681"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="680"/>
<source>Cannot remove the last layer.</source>
<comment>python error</comment>
<translation>Non é posíbel eliminar a última capa.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="722"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="721"/>
<source>Cannot create layer without a name.</source>
<comment>python error</comment>
<translation>Non é posíbel crear unha capa sen nome.</translation>
28997,7 → 28897,7
<translation>ao elemento &lt;IpiSettingsEntry&gt; fáltalle o atributo «nome»</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="766"/>
<location filename="../../scribus/scribus.cpp" line="764"/>
<source>Scribus Development Version</source>
<translation>Versión de desenvolvemento do Scribus</translation>
</message>
29058,8 → 28958,8
</message>
<message>
<location filename="../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="117"/>
<location filename="../../scribus/scribus.cpp" line="2158"/>
<location filename="../../scribus/scribus.cpp" line="2403"/>
<location filename="../../scribus/scribus.cpp" line="2156"/>
<location filename="../../scribus/scribus.cpp" line="2401"/>
<source>Document Template: </source>
<translation>Modelo de documento: </translation>
</message>
29086,95 → 28986,95
<translation>A propiedade non é válida</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="313"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="316"/>
<source>Couldn&apos;t convert result type &apos;%1&apos;.</source>
<translation>Non foi posíbel converter o tipo de resultado «%1».</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="443"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="446"/>
<source>Property type &apos;%1&apos; not supported</source>
<translation>Non se acepta o tipo de propiedade «%1»</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="461"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="464"/>
<source>Couldn&apos;t convert &apos;%1&apos; to property type &apos;%2&apos;</source>
<translation>Non foi posíbel converter «%1» ao tipo de propiedade «%2»</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="469"/>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.cpp" line="472"/>
<source>Types matched, but setting property failed.</source>
<translation>Os tipos coinciden, mais a asignación de propiedade fallou.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="123"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="139"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="122"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.cpp" line="138"/>
<source>Unable to save pixmap</source>
<comment>scripter error</comment>
<translation>Non foi posíbel gardar a imaxe</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="234"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="235"/>
<source>Point list must contain at least two points (four values).</source>
<comment>python error</comment>
<translation>A lista de puntos debe conter dous puntos cando menos (catro valores).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="239"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="316"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="240"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="317"/>
<source>Point list must contain an even number of values.</source>
<comment>python error</comment>
<translation>A lista de puntos debe conter un número par de valores.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="311"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="312"/>
<source>Point list must contain at least three points (six values).</source>
<comment>python error</comment>
<translation>A lista de puntos debe conter tres puntos cando menos (seis valores).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="392"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="393"/>
<source>Point list must contain at least four points (eight values).</source>
<comment>python error</comment>
<translation>A lista de puntos debe conter catro valores cando menos (oito valores).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="397"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="398"/>
<source>Point list must have a multiple of six values.</source>
<comment>python error</comment>
<translation>A lista de puntos debe ter un múltiplo de seis valores.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="495"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="496"/>
<source>Object not found.</source>
<comment>python error</comment>
<translation>Non se atopou o obxecto.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="598"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="599"/>
<source>Cannot get style of a non-text frame.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="664"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="665"/>
<source>Style not found.</source>
<comment>python error</comment>
<translation>Non se atopou o estilo.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="722"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="723"/>
<source>Cannot set character style on a non-text frame.</source>
<comment>python error</comment>
<translation>Non é posíbel asignar un estilo de caracteres nunha moldura que non sexa de texto.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="747"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="748"/>
<source>Character style not found.</source>
<comment>python error</comment>
<translation>Non se atopou o estilo de carácter.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="639"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="640"/>
<source>Cannot set style on a non-text frame.</source>
<comment>python error</comment>
<translation>Non é posíbel asignar un estilo a unha moldura que non sexa de texto.</translation>
29270,48 → 29170,48
<translation>Só se pode comprobar se rebordan as molduras de texto</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="51"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="585"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="586"/>
<source>&amp;Execute Script...</source>
<translation>&amp;Executar un script...</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="52"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="586"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="53"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="587"/>
<source>Show &amp;Console</source>
<translation>Mostrar a &amp;consola</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="53"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="587"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="54"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="588"/>
<source>&amp;About Script...</source>
<translation>&amp;Sobre o script...</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="85"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="589"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="86"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="590"/>
<source>&amp;Script</source>
<translation>&amp;Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="86"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="590"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="87"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="591"/>
<source>&amp;Scribus Scripts</source>
<translation>&amp;Scripts do Scribus</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="89"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="591"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="90"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="592"/>
<source>&amp;Recent Scripts</source>
<translation>Scripts &amp;recentes</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="557"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="558"/>
<source>About Script</source>
<translation>Sobre o script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="872"/>
<location filename="../../scribus/plugins/scriptplugin/scriptplugin.cpp" line="910"/>
<source>Scribus Python interface module
 
This module is the Python interface for Scribus. It provides functions
29435,8 → 29335,8
</message>
<message>
<location filename="../../scribus/main_nix.cpp" line="117"/>
<location filename="../../scribus/main_win32.cpp" line="292"/>
<location filename="../../scribus/main_win32.cpp" line="344"/>
<location filename="../../scribus/main_win32.cpp" line="294"/>
<location filename="../../scribus/main_win32.cpp" line="346"/>
<source>Scribus Crash</source>
<translation>Fallo xeral do Scribus</translation>
</message>
29446,13 → 29346,13
<translation>Scribus falla debido ao sinal nº %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="361"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="360"/>
<source>Need selection or argument list of items to group</source>
<comment>python error</comment>
<translation>Precísase dunha selección ou unha lista de argumentos de elementos para agrupar</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="393"/>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.cpp" line="392"/>
<source>Cannot group less than two items</source>
<comment>python error</comment>
<translation>Non é posíbel agrupar menos de dous elementos</translation>
29488,7 → 29388,7
<message>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3260"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2171"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="6135"/>
<location filename="../../scribus/plugins/fileloader/scribus150format/scribus150format.cpp" line="6134"/>
<source>Copy #%1 of </source>
<translation>Copia nº %1 de </translation>
</message>
29553,7 → 29453,7
<translation>Importador do Draw do OpenOffice.org</translation>
</message>
<message>
<location filename="../../scribus/main_win32.cpp" line="294"/>
<location filename="../../scribus/main_win32.cpp" line="296"/>
<source>Scribus crashes due to the following exception : %1</source>
<translation>Scribus quebrouse debido á seguinte excepción: %1</translation>
</message>
29619,7 → 29519,7
<translation>A buscar tipos de letra</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4145"/>
<location filename="../../scribus/scribus.cpp" line="4141"/>
<source>The changes to your document have not been saved and you have requested to revert them. Do you wish to continue?</source>
<translation>Non se gardaron as mudanzas realizadas no documento e pediu volver atrás. Desexa continuar?</translation>
</message>
30201,49 → 30101,55
<translation>Non se atopou o ficheiro de configuración %1 ou este non é lexíbel</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="58"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="60"/>
<source>Cannot have an empty paragraph style name.</source>
<comment>python error</comment>
<translation>Un nome de estilo de parágrafo non pode estar baleiro.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="64"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="66"/>
<source>hasdropcap is true but dropcaplines value is invalid</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="70"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="72"/>
<source>hasdropcap and bullet are not allowed to be specified together.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="180"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="126"/>
<source>invalid tab-position specified.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="218"/>
<source>Cannot have an empty char style name.</source>
<comment>python error</comment>
<translation>Un nome de estilo de carácter non pode estar baleiro.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="189"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="227"/>
<source>Specified font is not available.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="201"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="239"/>
<source>Specified fill color is not available in document.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="209"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="247"/>
<source>Specified stroke color is not available in document.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="351"/>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.cpp" line="389"/>
<source>Specified color is not available in document.</source>
<comment>python error</comment>
<translation type="unfinished"></translation>
30662,7 → 30568,7
<translation>Non é posíbel asignar recheo inferior de cela a un elemento que non sexa unha táboa.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="136"/>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.cpp" line="137"/>
<source>Both numRows and numColumns must be greater than 0.</source>
<comment>python error</comment>
<translation>Tanto o número de fileiras como o de columnas teñen que ser maiores de 0.</translation>
30957,7 → 30863,7
<translation>Nepalés</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="767"/>
<location filename="../../scribus/scribus.cpp" line="765"/>
<source>You are running a development version of Scribus 1.5.x. The document you are working with was created in Scribus 1.2.x. Saving the current file under 1.5.x renders it unable to be edited in Scribus 1.2.x versions. To preserve the ability to edit in 1.2.x, save this file under a different name and further edit the newly named file and the original will be untouched. Are you sure you wish to proceed with this operation?</source>
<translation>Está a executar unha versión en desenvolvemento do Scribus 1.5.x. O documento co que está a traballar creouse con Scribus 1.2.x. Se garda o ficheiro actual con 1.5.x non se poderá editar nas versións 1.2.x do Scribus. Para manter a posibilidade de editalo con 1.2.x, salve este ficheiro cun nome diferente e continúe editando o ficheiro novo deixando o orixinal sen tocar. Ten certeza de querer continuar con esta operación?</translation>
</message>
30967,12 → 30873,12
<translation>Importador de PUB</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3321"/>
<location filename="../../scribus/scribus.cpp" line="3317"/>
<source>&lt;p&gt;You are trying to import more pages than there are available in the current document counting from the active page.&lt;/p&gt;Choose one of the following:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Create&lt;/b&gt; missing pages&lt;/li&gt;&lt;li&gt;&lt;b&gt;Import&lt;/b&gt; pages until the last page&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancel&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</source>
<translation>&lt;p&gt;Está tentando importar máis páxinas das que hai dispoñíbeis no documento actual contando a partir da páxina activa.&lt;/p&gt;Escolla unha destas opcións:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Crear&lt;/b&gt; as páxinas que falten&lt;/li&gt;&lt;li&gt;&lt;b&gt;Importar&lt;/b&gt; páxinas até a derradeira&lt;/li&gt;&lt;li&gt;&lt;b&gt;Cancelar&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="18190"/>
<location filename="../../scribus/scribusdoc.cpp" line="18232"/>
<source>Unacceptable settings for note style</source>
<translation>Opcións inaceptábeis para o estilo de notas</translation>
</message>
32087,7 → 31993,7
<name>SMCellStyle</name>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="31"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="411"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="389"/>
<source>Properties</source>
<translation>Propiedades</translation>
</message>
32107,18 → 32013,7
<translation>Estilo novo</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="170"/>
<source>Clone of %1</source>
<translation>Clon de %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="394"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smcellstyle.cpp" line="526"/>
<location filename="../../scribus/ui/smcellstyle.cpp" line="504"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Asignar ese estilo como pai crearía un bucle infinito.</translation>
</message>
32159,33 → 32054,22
<context>
<name>SMCharacterStyle</name>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2109"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2087"/>
<source>Character Styles</source>
<translation>Estilos de carácter</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2114"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2092"/>
<source>Character Style</source>
<translation>Estilo de carácter</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2247"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2225"/>
<source>New Style</source>
<translation>Estilo novo</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2269"/>
<source>Clone of %1</source>
<translation>Clon de %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="2293"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="3072"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="3028"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Asignar ese estilo como pai crearía un bucle infinito.</translation>
</message>
32223,102 → 32107,102
<context>
<name>SMFontFeatures</name>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="481"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="489"/>
<source>Default Capitals</source>
<translation>Maiúsculas predeterminadas</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="484"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="492"/>
<source>Small Capitals</source>
<translation>Versalitas</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="486"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="494"/>
<source>Small Capitals from Capitals</source>
<translation>Versalitas de maiúsculas</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="488"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="496"/>
<source>Petite Capitals</source>
<translation>Versalitas</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="490"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="498"/>
<source>Petite Capitals from Capitals</source>
<translation>Versalitas de maiúsculas</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="492"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="500"/>
<source>Unicase</source>
<translation>Unicase</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="494"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="502"/>
<source>Titling</source>
<translation>Titulación</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="502"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="510"/>
<source>Default Position</source>
<translation>Posición predeterminada</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="505"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="513"/>
<source>Subscript</source>
<translation>Subíndice</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="507"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="515"/>
<source>Superscript</source>
<translation>Superíndice</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="509"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="517"/>
<source>Ordinals</source>
<translation>Ordinais</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="517"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="525"/>
<source>Default Numerals</source>
<translation>Numerais predeterminados</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="520"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="528"/>
<source>Lining</source>
<translation>Aliñación</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="522"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="530"/>
<source>Old Style</source>
<translation>Ó vello estilo</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="530"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="538"/>
<source>Default Numeral Width</source>
<translation>Anchura de numeral predeterminada</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="533"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="541"/>
<source>Proportional</source>
<translation>Proporcional</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="535"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="543"/>
<source>Tabular</source>
<translation>Tabulación</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="543"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="551"/>
<source>No Fractions</source>
<translation>Sen Fraccións</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="546"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="554"/>
<source>Diagonal Fractions</source>
<translation>Fraccións Diagonais</translation>
</message>
<message>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="548"/>
<location filename="../../scribus/ui/smfontfeatures.cpp" line="556"/>
<source>Stacked Fractions</source>
<translation>Fraccións Apiladas</translation>
</message>
32326,37 → 32210,26
<context>
<name>SMLineStyle</name>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="35"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="381"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="36"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="402"/>
<source>Properties</source>
<translation>Propiedades</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="45"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="46"/>
<source>Line Styles</source>
<translation>Estilos de liña</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="50"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="51"/>
<source>Line Style</source>
<translation>Estilo de liña</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="192"/>
<location filename="../../scribus/ui/smlinestyle.cpp" line="193"/>
<source>New Style</source>
<translation>Estilo novo</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="202"/>
<source>Clone of %1</source>
<translation>Clon de %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smlinestyle.cpp" line="215"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>SMLineStyleWidget</name>
32843,18 → 32716,7
<translation>Estilo novo</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="252"/>
<source>Clone of %1</source>
<translation>Clon de %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="277"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtextstyles.cpp" line="1987"/>
<location filename="../../scribus/ui/smtextstyles.cpp" line="1965"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Asignar ese estilo como pai crearía un bucle infinito.</translation>
</message>
32985,7 → 32847,7
<name>SMTableStyle</name>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="27"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="407"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="385"/>
<source>Properties</source>
<translation>Propiedades</translation>
</message>
33005,18 → 32867,7
<translation>Estilo novo</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="166"/>
<source>Clone of %1</source>
<translation>Clon de %1</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="390"/>
<source>%1 (%2)</source>
<comment>This for unique name when creating a new character style. %1 will be the name of the style and %2 will be a number forming a style name like: New Style (2)</comment>
<translation>%1 (%2)</translation>
</message>
<message>
<location filename="../../scribus/ui/smtablestyle.cpp" line="524"/>
<location filename="../../scribus/ui/smtablestyle.cpp" line="502"/>
<source>Setting that style as parent would create an infinite loop.</source>
<translation>Asignar ese estilo como pai crearía un bucle infinito.</translation>
</message>
34677,8 → 34528,8
<translation>Documento de Scribus 1.2.x</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1947"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="2474"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1948"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="2478"/>
<source>Copy #%1 of </source>
<translation>Copiar nº %1 de </translation>
</message>
34693,7 → 34544,7
<translation>Permite que o Scribus lea ficheiros formatados para Scribus 1.2.x.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1372"/>
<location filename="../../scribus/plugins/fileloader/scribus12format/scribus12format.cpp" line="1373"/>
<source>You have opened a file produced by Scribus 1.2.x.
If you save it in this version, it will no longer be readable by older Scribus versions.</source>
<translation>Abriu un ficheiro producido con Scribus 1.2.x.
34708,7 → 34559,7
<context>
<name>Scribus134Format</name>
<message>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3668"/>
<location filename="../../scribus/plugins/fileloader/scribus134format/scribus134format.cpp" line="3670"/>
<source>Copy #%1 of </source>
<translation>Copia nº %1 de </translation>
</message>
34732,7 → 34583,7
<context>
<name>Scribus13Format</name>
<message>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2682"/>
<location filename="../../scribus/plugins/fileloader/scribus13format/scribus13format.cpp" line="2684"/>
<source>Copy #%1 of </source>
<translation>Copia nº %1 de </translation>
</message>
34843,7 → 34694,7
<location filename="../../scribus/scribusdoc.cpp" line="204"/>
<location filename="../../scribus/scribusdoc.cpp" line="210"/>
<location filename="../../scribus/scribusdoc.cpp" line="242"/>
<location filename="../../scribus/scribusdoc.cpp" line="16541"/>
<location filename="../../scribus/scribusdoc.cpp" line="16583"/>
<source>Document</source>
<translation>Documento</translation>
</message>
34853,27 → 34704,27
<translation>Fondo</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11346"/>
<location filename="../../scribus/scribusdoc.cpp" line="11381"/>
<source>Cannot Delete In-Use Item</source>
<translation>Non posíbel eliminar o elemento en uso</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11346"/>
<location filename="../../scribus/scribusdoc.cpp" line="11381"/>
<source>The item %1 is currently being edited by Story Editor. The delete operation will be cancelled</source>
<translation>O elemento %1 está a ser modificado no Editor de artigos. Cancelarase a operación de eliminación</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11949"/>
<location filename="../../scribus/scribusdoc.cpp" line="11988"/>
<source>Some objects are locked.</source>
<translation>Algúns obxectos están bloqueados.</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11945"/>
<location filename="../../scribus/scribusdoc.cpp" line="11984"/>
<source>&amp;Unlock All</source>
<translation>&amp;Desbloquear todo</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11946"/>
<location filename="../../scribus/scribusdoc.cpp" line="11985"/>
<source>&amp;Skip locked objects</source>
<translation>&amp;Saltar os obxectos bloqueados</translation>
</message>
34884,22 → 34735,22
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="950"/>
<location filename="../../scribus/scribusdoc.cpp" line="16129"/>
<location filename="../../scribus/scribusdoc.cpp" line="16171"/>
<source>Adjusting Colors</source>
<translation>A axustar as cores</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="9003"/>
<location filename="../../scribus/scribusdoc.cpp" line="9038"/>
<source>remove direct paragraph formatting</source>
<translation>eliminar o formato directo do parágrafo</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="9472"/>
<location filename="../../scribus/scribusdoc.cpp" line="9507"/>
<source>remove direct char formatting</source>
<translation>eliminar o formato directo de carácter</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13553"/>
<location filename="../../scribus/scribusdoc.cpp" line="13592"/>
<source>Number of copies: %1
Horizontal shift: %2
Vertical shift: %3
34910,7 → 34761,7
Rotación: %4</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13588"/>
<location filename="../../scribus/scribusdoc.cpp" line="13627"/>
<source>Number of rows: %1
Number of columns: %2
Horizontal gap: %3
34918,14 → 34769,14
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="13707"/>
<location filename="../../scribus/scribusdoc.cpp" line="13746"/>
<source>Copied %1 items on %2 pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="14923"/>
<location filename="../../scribus/scribusdoc.cpp" line="14978"/>
<location filename="../../scribus/scribusdoc.cpp" line="15111"/>
<location filename="../../scribus/scribusdoc.cpp" line="14967"/>
<location filename="../../scribus/scribusdoc.cpp" line="15022"/>
<location filename="../../scribus/scribusdoc.cpp" line="15155"/>
<source>Group%1</source>
<translation>Grupo%1</translation>
</message>
34936,23 → 34787,23
<translation>Importado</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="16557"/>
<location filename="../../scribus/scribusdoc.cpp" line="16599"/>
<source>File %1 autosaved</source>
<translation>O ficheiro %1 foi gardado automaticamente</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="17815"/>
<location filename="../../scribus/scribusdoc.cpp" line="17853"/>
<location filename="../../scribus/scribusdoc.cpp" line="17857"/>
<location filename="../../scribus/scribusdoc.cpp" line="17895"/>
<source>No Style</source>
<translation>Sen estilo</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="18184"/>
<location filename="../../scribus/scribusdoc.cpp" line="18226"/>
<source>%1 note style has document as range and provide same numbering style as set %2</source>
<translation>O estilo de notas %1 ten documento como intervalo e fornece o mesmo estilo de numeración que o conxunto %2</translation>
</message>
<message>
<location filename="../../scribus/scribusdoc.cpp" line="11253"/>
<location filename="../../scribus/scribusdoc.cpp" line="11288"/>
<source>Do you really want to clear the content of all selected frames?</source>
<translation>Desexa realmente limpar o contido de todas as molduras seleccionadas?</translation>
</message>
34960,96 → 34811,96
<context>
<name>ScribusMainWindow</name>
<message>
<location filename="../../scribus/scribus.cpp" line="403"/>
<location filename="../../scribus/scribus.cpp" line="401"/>
<source>Initializing Story Editor</source>
<translation>A iniciar o editor de artigos</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="417"/>
<location filename="../../scribus/scribus.cpp" line="415"/>
<source>Reading Scrapbook</source>
<translation>A ler o portarretallos</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3490"/>
<location filename="../../scribus/scribus.cpp" line="3486"/>
<source>Fatal Error</source>
<translation>Erro fatal</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="800"/>
<location filename="../../scribus/scribus.cpp" line="798"/>
<source>Open &amp;Recent</source>
<translation>Abrir un &amp;recente</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="808"/>
<location filename="../../scribus/scribus.cpp" line="3326"/>
<location filename="../../scribus/scribus.cpp" line="806"/>
<location filename="../../scribus/scribus.cpp" line="3322"/>
<source>&amp;Import</source>
<translation>&amp;Importar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="815"/>
<location filename="../../scribus/scribus.cpp" line="813"/>
<source>&amp;Export</source>
<translation>E&amp;xportar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="911"/>
<location filename="../../scribus/scribus.cpp" line="909"/>
<source>Preview Settings</source>
<translation>Configuración da previsualización</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="886"/>
<location filename="../../scribus/scribus.cpp" line="884"/>
<source>Level</source>
<translation>Nivel</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="892"/>
<location filename="../../scribus/scribus.cpp" line="890"/>
<source>Send to La&amp;yer</source>
<translation>Enviar para a &amp;capa</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="918"/>
<location filename="../../scribus/scribus.cpp" line="916"/>
<source>&amp;PDF Options</source>
<translation>Opcións do &amp;PDF</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="2186"/>
<location filename="../../scribus/scribus.cpp" line="2226"/>
<location filename="../../scribus/scribus.cpp" line="3800"/>
<location filename="../../scribus/scribus.cpp" line="4249"/>
<location filename="../../scribus/scribus.cpp" line="4323"/>
<location filename="../../scribus/scribus.cpp" line="4480"/>
<location filename="../../scribus/scribus.cpp" line="2184"/>
<location filename="../../scribus/scribus.cpp" line="2224"/>
<location filename="../../scribus/scribus.cpp" line="3796"/>
<location filename="../../scribus/scribus.cpp" line="4245"/>
<location filename="../../scribus/scribus.cpp" line="4319"/>
<location filename="../../scribus/scribus.cpp" line="4476"/>
<location filename="../../scribus/scribus.cpp" line="8651"/>
<source>Ready</source>
<translation>Preparado</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3149"/>
<location filename="../../scribus/scribus.cpp" line="3267"/>
<location filename="../../scribus/scribus.cpp" line="3896"/>
<location filename="../../scribus/scribus.cpp" line="3145"/>
<location filename="../../scribus/scribus.cpp" line="3263"/>
<location filename="../../scribus/scribus.cpp" line="3892"/>
<source>Open</source>
<translation>Abrir</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3288"/>
<location filename="../../scribus/scribus.cpp" line="3284"/>
<source>Importing Pages...</source>
<translation>A importar páxina(s)...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3319"/>
<location filename="../../scribus/scribus.cpp" line="3315"/>
<source>Import Page(s)</source>
<translation>Importar páxina(s)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3365"/>
<location filename="../../scribus/scribus.cpp" line="3361"/>
<source>Import done</source>
<translation>Importado</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3369"/>
<location filename="../../scribus/scribus.cpp" line="3365"/>
<source>Found nothing to import</source>
<translation>Non se atopou nada que importar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3443"/>
<location filename="../../scribus/scribus.cpp" line="3439"/>
<source>File does not exist on the specified path :
%1</source>
<translation>Non existe o ficheiro na ruta especificada:
35056,38 → 34907,38
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3491"/>
<location filename="../../scribus/scribus.cpp" line="3487"/>
<source>File %1 is not in an acceptable format</source>
<translation>O ficheiro %1 non está nun formato aceptábel</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3532"/>
<location filename="../../scribus/scribus.cpp" line="3528"/>
<source>Loading...</source>
<translation>A cargar...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3698"/>
<location filename="../../scribus/scribus.cpp" line="3694"/>
<source> was replaced by: </source>
<translation> substituíuse por: </translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3728"/>
<location filename="../../scribus/scribus.cpp" line="3724"/>
<source>(converted)</source>
<translation>(convertido)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4087"/>
<location filename="../../scribus/scribus.cpp" line="4083"/>
<source>Filename and Path for Image</source>
<translation>Nome de ficheiro e ruta da imaxe</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4087"/>
<location filename="../../scribus/scribus.cpp" line="4083"/>
<source>All Files (*)</source>
<translation>Todos os ficheiros (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4179"/>
<location filename="../../scribus/scribus.cpp" line="4244"/>
<location filename="../../scribus/scribus.cpp" line="4175"/>
<location filename="../../scribus/scribus.cpp" line="4240"/>
<location filename="../../scribus/scribus.cpp" line="7087"/>
<location filename="../../scribus/scribus.cpp" line="7249"/>
<location filename="../../scribus/scribus.cpp" line="7263"/>
35097,32 → 34948,32
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4229"/>
<location filename="../../scribus/scribus.cpp" line="5291"/>
<location filename="../../scribus/scribus.cpp" line="4225"/>
<location filename="../../scribus/scribus.cpp" line="5287"/>
<location filename="../../scribus/scribus.cpp" line="7078"/>
<source>Save As</source>
<translation>Gardar como</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4258"/>
<location filename="../../scribus/scribus.cpp" line="4254"/>
<source>Saving...</source>
<translation>A gardar...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4386"/>
<location filename="../../scribus/scribus.cpp" line="4382"/>
<location filename="../../scribus/scribus.cpp" line="6939"/>
<source>Scribus has detected some errors. Consider using the Preflight Verifier to correct them</source>
<translation>O Scribus detectou algúns erros. Considere utilizar o Comprobador pré-voo para corrixilos</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4421"/>
<location filename="../../scribus/scribus.cpp" line="4417"/>
<source>Printing...</source>
<translation>A imprimir...</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1103"/>
<location filename="../../scribus/scribus.cpp" line="2255"/>
<location filename="../../scribus/scribus.cpp" line="4425"/>
<location filename="../../scribus/scribus.cpp" line="1101"/>
<location filename="../../scribus/scribus.cpp" line="2253"/>
<location filename="../../scribus/scribus.cpp" line="4421"/>
<location filename="../../scribus/scribus.cpp" line="7055"/>
<location filename="../../scribus/scribus.cpp" line="8415"/>
<source>Document</source>
35129,38 → 34980,38
<translation>Documento</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4468"/>
<location filename="../../scribus/scribus.cpp" line="4464"/>
<source>Printing failed!</source>
<translation>Non foi posíbel imprimir!</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4559"/>
<location filename="../../scribus/scribus.cpp" line="4555"/>
<source>Cannot Cut In-Use Item</source>
<translation>Non é posíbel recortar un elemento en uso</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4559"/>
<location filename="../../scribus/scribus.cpp" line="4555"/>
<source>The item %1 is currently being edited by Story Editor. The cut operation will be cancelled</source>
<translation>O elemento %1 está a ser modificado no Editor de Artigos. Cancelarase a operación de recortar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5205"/>
<location filename="../../scribus/scribus.cpp" line="5201"/>
<source>About Qt</source>
<translation>Sobre Qt</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5236"/>
<location filename="../../scribus/scribus.cpp" line="5232"/>
<source>Scribus Manual</source>
<translation>Manual do Scribus</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6336"/>
<location filename="../../scribus/scribus.cpp" line="6332"/>
<source>&amp;Size:</source>
<translation>&amp;Tamaño:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1431"/>
<location filename="../../scribus/scribus.cpp" line="6336"/>
<location filename="../../scribus/scribus.cpp" line="1429"/>
<location filename="../../scribus/scribus.cpp" line="6332"/>
<source>Size</source>
<translation>Tamaño</translation>
</message>
35211,48 → 35062,48
<translation>&amp;Desbloquear todo</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4006"/>
<location filename="../../scribus/scribus.cpp" line="4002"/>
<location filename="../../scribus/scribus.cpp" line="8850"/>
<source>Do you really want to replace your existing image?</source>
<translation>Pretende substituír a imaxe existente?</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="842"/>
<location filename="../../scribus/scribus.cpp" line="840"/>
<source>Contents</source>
<translation>Contido</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="975"/>
<location filename="../../scribus/scribus.cpp" line="973"/>
<source>&amp;Character</source>
<translation>&amp;Carácter</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="996"/>
<location filename="../../scribus/scribus.cpp" line="994"/>
<source>&amp;Quote</source>
<translation>&amp;Cita</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1037"/>
<location filename="../../scribus/scribus.cpp" line="1035"/>
<source>Liga&amp;ture</source>
<translation>Liga&amp;tura</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="840"/>
<location filename="../../scribus/scribus.cpp" line="838"/>
<source>Paste Recent</source>
<translation>Pegar recente</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4227"/>
<location filename="../../scribus/scribus.cpp" line="4223"/>
<source>Documents (*.sla *.sla.gz);;All Files (*)</source>
<translation>Documentos (*.sla *.sla.gz);;Todos os ficheiros (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3918"/>
<location filename="../../scribus/scribus.cpp" line="3914"/>
<source>Do you really want to clear all your text?</source>
<translation>Realmente pretende eliminar todo o texto?</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3695"/>
<location filename="../../scribus/scribus.cpp" line="3691"/>
<source>Some color profiles used by this document are not installed:</source>
<translation>Non están instalados algúns dos perfís de cores empregados por este documento:</translation>
</message>
35262,7 → 35113,7
<translation>%1;;Todos os ficheiros (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="388"/>
<location filename="../../scribus/scribus.cpp" line="386"/>
<source>Applying User Shortcuts</source>
<translation>A aplicar os atallos do usuario</translation>
</message>
35272,8 → 35123,8
<translation>A actualizar as imaxes</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4177"/>
<location filename="../../scribus/scribus.cpp" line="4242"/>
<location filename="../../scribus/scribus.cpp" line="4173"/>
<location filename="../../scribus/scribus.cpp" line="4238"/>
<source>Your document was saved to a temporary file and could not be moved:
%1</source>
<translation>O documento gardouse nun ficheiro temporal e non foi posíbel movelo:
35280,24 → 35131,24
%1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="4532"/>
<location filename="../../scribus/scribus.cpp" line="4528"/>
<source>Print engine initialization failed</source>
<translation>Fallou a inicialización do motor de impresión</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3123"/>
<location filename="../../scribus/scribus.cpp" line="3119"/>
<source>All Supported Formats</source>
<translation>Todos os formatos coñecidos</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9128"/>
<location filename="../../scribus/scribus.cpp" line="9203"/>
<location filename="../../scribus/scribus.cpp" line="9129"/>
<location filename="../../scribus/scribus.cpp" line="9204"/>
<source>&amp;Name:</source>
<translation>&amp;Nome:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9128"/>
<location filename="../../scribus/scribus.cpp" line="9203"/>
<location filename="../../scribus/scribus.cpp" line="9129"/>
<location filename="../../scribus/scribus.cpp" line="9204"/>
<source>New Entry</source>
<translation>Entrada nova</translation>
</message>
35307,17 → 35158,17
<translation>Falta o Ghostscript: Non se dispón da previsualización do Postscript</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3474"/>
<location filename="../../scribus/scribus.cpp" line="3470"/>
<source>Document is already opened</source>
<translation>O documento xa está aberto</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3475"/>
<location filename="../../scribus/scribus.cpp" line="3471"/>
<source>This document is already in use.You&apos;ll be switched into its window now.</source>
<translation>Xa se está a utilizar este documento. Pasará a esta xanela agora.</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3492"/>
<location filename="../../scribus/scribus.cpp" line="3488"/>
<source>The file may be damaged or may have been produced in a later version of Scribus.</source>
<translation>O ficheiro pode estar estragado ou pode ser que fose producido por unha versión posterior do Scribus.</translation>
</message>
35327,173 → 35178,173
<translation>A editar símbolo: %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1385"/>
<location filename="../../scribus/scribus.cpp" line="1383"/>
<source>Unknown</source>
<translation>Descoñecido</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1436"/>
<location filename="../../scribus/scribus.cpp" line="1434"/>
<source>%1 Objects selected, Selection Size = %2 x %3</source>
<translation>%1 obxectos escollidos; tamaño da selección = %2 x %3</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="409"/>
<location filename="../../scribus/scribus.cpp" line="407"/>
<source>Initializing Languages</source>
<translation>A inicializar os idiomas</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="578"/>
<location filename="../../scribus/scribus.cpp" line="576"/>
<source>All Supported Formats (%1);;%2All Files (*)</source>
<translation>Todos os formatos admitidos (%1);;%2Todos os ficheiros (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1050"/>
<location filename="../../scribus/scribus.cpp" line="1048"/>
<source>Marks</source>
<translation>Marcas</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9554"/>
<location filename="../../scribus/scribus.cpp" line="9555"/>
<source>Insert new </source>
<translation>Inserir nova</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9571"/>
<location filename="../../scribus/scribus.cpp" line="9805"/>
<location filename="../../scribus/scribus.cpp" line="9572"/>
<location filename="../../scribus/scribus.cpp" line="9806"/>
<source>Anchor mark</source>
<translation>Marca de áncora</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9579"/>
<location filename="../../scribus/scribus.cpp" line="9818"/>
<location filename="../../scribus/scribus.cpp" line="9580"/>
<location filename="../../scribus/scribus.cpp" line="9819"/>
<source>Mark with &lt;%1&gt; variable text</source>
<translation>Marca co texto variábel &lt;%1&gt;</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9587"/>
<location filename="../../scribus/scribus.cpp" line="9856"/>
<location filename="../../scribus/scribus.cpp" line="9588"/>
<location filename="../../scribus/scribus.cpp" line="9857"/>
<source>Mark to %1 item</source>
<translation>Marca ao elemento %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9597"/>
<location filename="../../scribus/scribus.cpp" line="9877"/>
<location filename="../../scribus/scribus.cpp" line="9598"/>
<location filename="../../scribus/scribus.cpp" line="9878"/>
<source>Mark to %1 mark</source>
<translation>Marca á marca %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="872"/>
<location filename="../../scribus/scribus.cpp" line="870"/>
<source>Duplicate/Transform</source>
<translation>Duplicar/Transformar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="342"/>
<location filename="../../scribus/scribus.cpp" line="340"/>
<source>Scribus</source>
<translation>Scribus</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="877"/>
<location filename="../../scribus/scribus.cpp" line="875"/>
<source>Grouping</source>
<translation>Agrupamento</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="882"/>
<location filename="../../scribus/scribus.cpp" line="880"/>
<source>Locking</source>
<translation>Bloqueo</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="894"/>
<location filename="../../scribus/scribus.cpp" line="892"/>
<source>Send to</source>
<translation>Enviar para</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="896"/>
<location filename="../../scribus/scribus.cpp" line="894"/>
<source>Scrapbook</source>
<translation>Portarretallos</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="900"/>
<location filename="../../scribus/scribus.cpp" line="898"/>
<source>Adjust</source>
<translation>Axustar</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="905"/>
<location filename="../../scribus/scribus.cpp" line="903"/>
<source>Image</source>
<translation>Imaxe</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="932"/>
<location filename="../../scribus/scribus.cpp" line="930"/>
<source>Text Frame Links</source>
<translation>Ligazóns a molduras de texto</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="937"/>
<location filename="../../scribus/scribus.cpp" line="935"/>
<source>Path Tools</source>
<translation>Ferramentas de trazo</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="947"/>
<location filename="../../scribus/scribus.cpp" line="945"/>
<source>Welding</source>
<translation>Fusión</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1022"/>
<location filename="../../scribus/scribus.cpp" line="1020"/>
<source>S&amp;paces &amp;&amp; Breaks</source>
<translation>Es&amp;pazos e quebras</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1077"/>
<location filename="../../scribus/scribus.cpp" line="1075"/>
<source>Zoom</source>
<translation>Ampliación</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1086"/>
<location filename="../../scribus/scribus.cpp" line="1084"/>
<source>Preview</source>
<translation>Previsualización</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1094"/>
<location filename="../../scribus/scribus.cpp" line="1092"/>
<source>Text Frames</source>
<translation>Molduras de texto</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1100"/>
<location filename="../../scribus/scribus.cpp" line="1098"/>
<source>Image Frames</source>
<translation>Molduras de imaxe</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1109"/>
<location filename="../../scribus/scribus.cpp" line="1107"/>
<source>Grids and Guides</source>
<translation>Grades e guías</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1258"/>
<location filename="../../scribus/scribus.cpp" line="1256"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1300"/>
<location filename="../../scribus/scribus.cpp" line="1298"/>
<location filename="../../scribus/scribus.cpp" line="8647"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1302"/>
<location filename="../../scribus/scribus.cpp" line="1300"/>
<location filename="../../scribus/scribus.cpp" line="8648"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="5291"/>
<location filename="../../scribus/scribus.cpp" line="5287"/>
<source>Text Files (*.txt);;All Files (*)</source>
<translation>Ficheiros de texto (*.txt);;Todos os ficheiros (*)</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6349"/>
<location filename="../../scribus/scribus.cpp" line="6345"/>
<source>&amp;Language:</source>
<translation>&amp;Lingua:</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="6349"/>
<location filename="../../scribus/scribus.cpp" line="6345"/>
<source>Language</source>
<translation>Idioma</translation>
</message>
35538,27 → 35389,27
<translation>Seleccionar a unidade actual</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="9787"/>
<location filename="../../scribus/scribus.cpp" line="9788"/>
<source>Edit %1</source>
<translation>Editar %1</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="924"/>
<location filename="../../scribus/scribus.cpp" line="922"/>
<source>C&amp;onvert to</source>
<translation>C&amp;onverter en</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1431"/>
<location filename="../../scribus/scribus.cpp" line="1429"/>
<source>%1 selected</source>
<translation>%1 seleccionados</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="3325"/>
<location filename="../../scribus/scribus.cpp" line="3321"/>
<source>C&amp;reate</source>
<translation>C&amp;rear</translation>
</message>
<message>
<location filename="../../scribus/scribus.cpp" line="1089"/>
<location filename="../../scribus/scribus.cpp" line="1087"/>
<source>Measurement</source>
<translation>Medida</translation>
</message>
35742,72 → 35593,72
<context>
<name>ScribusView</name>
<message>
<location filename="../../scribus/scribusview.cpp" line="1047"/>
<location filename="../../scribus/scribusview.cpp" line="1045"/>
<source>Do you really want to clear all your text?</source>
<translation>Realmente pretende eliminar todo o texto?</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1186"/>
<location filename="../../scribus/scribusview.cpp" line="1184"/>
<source>Copy Here</source>
<translation>Copiar aquí</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1187"/>
<location filename="../../scribus/scribusview.cpp" line="1185"/>
<source>Move Here</source>
<translation>Mover aquí</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="1188"/>
<location filename="../../scribus/scribusview.cpp" line="1186"/>
<source>Cancel</source>
<translation>Cancelar</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10634"/>
<location filename="../../scribus/pageitem.cpp" line="10644"/>
<source>Print: </source>
<translation>Imprimir: </translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10636"/>
<location filename="../../scribus/pageitem.cpp" line="10646"/>
<source>Enabled</source>
<translation>Activado</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="10638"/>
<location filename="../../scribus/pageitem.cpp" line="10648"/>
<source>Disabled</source>
<translation>Desactivado</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="3158"/>
<location filename="../../scribus/scribusview.cpp" line="3160"/>
<source>Cannot Convert In-Use Item</source>
<translation>Non é posíbel converter o elemento en uso</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="3158"/>
<location filename="../../scribus/scribusview.cpp" line="3160"/>
<source>The item %1 is currently being edited by Story Editor. The convert to outlines operation for this item will be skipped</source>
<translation>O elemento %1 está a ser modificado no Editor de Artigos. Saltarase a operación de conversión deste elemento a siluetas</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="2145"/>
<location filename="../../scribus/scribusview.cpp" line="2143"/>
<source>Page %1 to %2</source>
<translation>Póxina %1 a %2</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="310"/>
<location filename="../../scribus/scribusview.cpp" line="308"/>
<source>Preview Mode</source>
<translation>Modo de previsualización</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="311"/>
<location filename="../../scribus/scribusview.cpp" line="309"/>
<source>CMS is active. Therefore the color display may not match the perception by visually impaired</source>
<translation>CMS está activo. En consecuencia, pode que a exhibición da cor non coincida coa percepción por parte de quen teña problemas visuais</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="226"/>
<location filename="../../scribus/scribusview.cpp" line="224"/>
<source>End Edit</source>
<translation>Rematar a edición</translation>
</message>
<message>
<location filename="../../scribus/scribusview.cpp" line="255"/>
<location filename="../../scribus/scribusview.cpp" line="253"/>
<source>Click here to leave this special edit mode</source>
<translation>Prema aquí para saír deste modo de edición especial</translation>
</message>
35960,64 → 35811,64
<context>
<name>ScripterCore</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="351"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="448"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="612"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="352"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="449"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="613"/>
<source>Script error</source>
<translation>Erro do script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="353"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="354"/>
<source>If you are running an official script report it at &lt;a href=&quot;http://bugs.scribus.net&quot;&gt;bugs.scribus.net&lt;/a&gt; please.</source>
<translation>Se está a executar un script oficial informe disto en &lt;a href=&quot;http://bugs.scribus.net&quot;&gt;bugs.scribus.net&lt;/a&gt;, por favor.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="355"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="356"/>
<source>This message is in your clipboard too. Use Ctrl+V to paste it into bug tracker.</source>
<translation>Esta mensaxe tamén está no portarretallos. Empregue Ctrl+V para apegala no xestor de erros.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="534"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="535"/>
<source>Examine Script</source>
<translation>Examinar o script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="449"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="450"/>
<source>There was an internal error while trying the command you entered. Details were printed to stderr. </source>
<translation>Produciuse un erro interno ao tentar a orde introducida. Enviáronse os detalles á saída normal.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="578"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="579"/>
<source>Startup Script error</source>
<translation>Erro do script de inicio</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="579"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="580"/>
<source>Could not find script: %1.</source>
<translation>Non foi posíbel atopar o script %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="613"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="614"/>
<source>Setting up the Python plugin failed. Error details were printed to stderr. </source>
<translation>Fallou a configuración do engadido en Python. Enviáronse os detalles á saída normal.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="547"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="548"/>
<source>Documentation for:</source>
<translation>Documentación sobre:</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="552"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="553"/>
<source>Script</source>
<translation>Script</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="552"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="553"/>
<source> doesn&apos;t contain any docstring!</source>
<translation> non contén ningún docstring!</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="534"/>
<location filename="../../scribus/plugins/scriptplugin/scriptercore.cpp" line="535"/>
<source>Python Scripts (*.py *.PY);;All Files (*)</source>
<translation>Scripts en Python (*.py *.PY);;Todos os ficheiros (*)</translation>
</message>
37328,8 → 37179,8
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="261"/>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="427"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="79"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="85"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="78"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="84"/>
<source> dpi</source>
<translation> ppp</translation>
</message>
37409,14 → 37260,14
<translation>Intención de saída PDF/X</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="286"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="285"/>
<source>Mandatory string for PDF/X or the PDF will fail PDF/X conformance. We recommend you use the title of the document.</source>
<translation>Cadea obrigatoria para PDF/X-3 ou o PDF non será conforme con PDF/X-3. Recomendamos que utilice o título do documento.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="503"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1251"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1259"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="502"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1250"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="1258"/>
<source>Page</source>
<translation>Páxina</translation>
</message>
37463,57 → 37314,57
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="841"/>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="854"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="100"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="103"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="99"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="102"/>
<source> sec</source>
<translation> seg</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="746"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="671"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="867"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="670"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="866"/>
<source>No Effect</source>
<translation>Sen efectos</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="751"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="672"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="868"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="671"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="867"/>
<source>Blinds</source>
<translation>Persianas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="756"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="673"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="869"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="672"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="868"/>
<source>Box</source>
<translation>Caixa</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="761"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="674"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="870"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="673"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="869"/>
<source>Dissolve</source>
<translation>Disolución</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="766"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="675"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="871"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="674"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="870"/>
<source>Glitter</source>
<translation>Brillos</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="771"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="676"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="872"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="675"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="871"/>
<source>Split</source>
<translation>Partir</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="776"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="677"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="873"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="676"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="872"/>
<source>Wipe</source>
<translation>Limpar</translation>
</message>
37753,117 → 37604,117
<translation>&amp;Perfil de saída:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="228"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="227"/>
<source>Show page previews of each page listed above.</source>
<translation>Mostrar a previsualización de páxina de cada páxina das que se listan en cima.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="231"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="230"/>
<source>Type of the display effect.</source>
<translation>Tipo de efecto.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="232"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="231"/>
<source>Direction of the effect of moving lines for the split and blind effects.</source>
<translation>Dirección do efecto de liñas en movemento para os efectos partir e persianas.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="233"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="232"/>
<source>Starting position for the box and split effects.</source>
<translation>Posición inicial para os efectos de caixa e partir.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="234"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="233"/>
<source>Direction of the glitter or wipe effects.</source>
<translation>Dirección dos efectos de brillos e borrado.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="235"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="234"/>
<source>Apply the selected effect to all pages.</source>
<translation>Aplicar os efectos seleccionados a todas as páxinas.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="199"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="198"/>
<source>Export all pages to PDF</source>
<translation>Exportar todas as páxinas a PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="200"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="199"/>
<source>Export a range of pages to PDF</source>
<translation>Exportar un intervalo de páxinas a PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="261"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="260"/>
<source>Color model for the output of your PDF. Choose Screen/Web for PDFs which are used for screen display and for printing on typical inkjets. Choose Printer when printing to a true 4 color CMYK printer. Choose Grayscale when you want a grey scale PDF.</source>
<translation>Modelo de cores para a saída para o seu PDF. Escolla Pantalla/Web para PDFs que se vaian utilizar para mostrar en pantalla e para imprimir nas impresoras de chorro de tinta normais. Escolla Impresora para imprimir en impresoras de catro cores CMYK verdadeiras. Escolla a escala de grises se o que quer é un PDF en escala de grises.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="263"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="262"/>
<source>Embed a color profile for solid colors</source>
<translation>Incorporar un perfil de cores para as cores sólidas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="264"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="263"/>
<source>Color profile for solid colors</source>
<translation>Perfil de cores para as cores sólidas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="265"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="264"/>
<source>Rendering intent for solid colors</source>
<translation>Propósito da exhibición para cores sólidas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="266"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="265"/>
<source>Embed a color profile for images</source>
<translation>Incorporar un perfil de cores para as imaxes</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="267"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="266"/>
<source>Do not use color profiles that are embedded in source images</source>
<translation>Non empregar perfís de cor incorporados en imaxes fonte</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="268"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="267"/>
<source>Color profile for images</source>
<translation>Perfil de cores para as imaxes</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="269"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="268"/>
<source>Rendering intent for images</source>
<translation>Propósito da exhibición para imaxes</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="285"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="284"/>
<source>Output profile for printing. If possible, get some guidance from your printer on profile selection.</source>
<translation>Perfil de saída para a impresión. De ser posíbel, solicite orientación na imprenta sobre a selección de perfís.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="280"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="279"/>
<source>Distance for bleed from the top of the physical page</source>
<translation>Distancia de sangrado desde a parte superior da páxina física</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="281"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="280"/>
<source>Distance for bleed from the bottom of the physical page</source>
<translation>Distancia de sangrado desde a parte inferior da páxina física</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="282"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="281"/>
<source>Distance for bleed from the left of the physical page</source>
<translation>Distancia de sangrado desde a esquerda da páxina física</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="283"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="282"/>
<source>Distance for bleed from the right of the physical page</source>
<translation>Distancia de sangrado desde a dereita da páxina física</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="206"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="205"/>
<source>Mirror Page(s) horizontally</source>
<translation>Reflectir a(s) páxina(s) horizontalmente</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="207"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="206"/>
<source>Mirror Page(s) vertically</source>
<translation>Reflectir a(s) páxina(s) verticalmente</translation>
</message>
37878,17 → 37729,17
<translation>&amp;Calidade da compresión:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="257"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="256"/>
<source>Allow copying of text or graphics from the PDF. If unchecked, text and graphics cannot be copied.</source>
<translation>Permitir a copia de texto ou gráficos do PDF. Se non se selecciona non se poden copiar nin texto nin gráficos.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="258"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="257"/>
<source>Allow adding annotations and fields to the PDF. If unchecked, editing annotations and fields is prevented.</source>
<translation>Permitir engadir anotacións e campos no PDF. Se non se selecciona impídese modificar as anotacións e os campos.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="270"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="269"/>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation>Permite que as manchas de cor se convertan en cores compostas. A non ser que pretenda imprimir manchas de cor nunha imprenta comercial, será preferíbel que deixe isto seleccionado.</translation>
</message>
37903,42 → 37754,42
<translation>Méto&amp;do de compresión:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="223"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="222"/>
<source>Embed fonts into the PDF. Embedding the fonts will preserve the layout and appearance of your document.</source>
<translation>Incorporar os tipos de letra ao PDF. Incorporar os tipos de letra mantén a disposición e a aparencia do documento.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="230"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="229"/>
<source>Length of time the effect runs. A shorter time will speed up the effect, a longer one will slow it down.</source>
<translation>Duración de tempo durante o que se executa o efecto. Un tempo menor acelera o efecto, un maior enlentéceo.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="209"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="208"/>
<source>Determines the binding of pages in the PDF. Unless you know you need to change it leave the default choice - Left.</source>
<translation>Determina o encadernado de páxinas no PDF. A non ser que saiba que o vai precisar deixe a escolla por omisión - Esquerda.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="210"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="209"/>
<source>Generates thumbnails of each page in the PDF. Some viewers can use the thumbnails for navigation.</source>
<translation>Xera miniaturas para cada páxina do PDF. Algúns lectores poden utilizar as miniaturas para navegar.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="213"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="212"/>
<source>Embed the bookmarks you created in your document. These are useful for navigating long PDF documents.</source>
<translation>Incorporar os marcadores creados no documento. Resultan útiles para navegar por documentos PDF longos.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="214"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="213"/>
<source>Export resolution of text and vector graphics. This does not affect the resolution of bitmap images like photos.</source>
<translation>Exportar a resolución do texto e os gráficos vectoriais. Isto non afecta a resolución das imaxes de mapas de bits como as fotos.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="216"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="215"/>
<source>Enables lossless compression of text and graphics. Unless you have a reason, leave this checked. This reduces PDF file size.</source>
<translation>Permite a compresión sen perdas de texto e gráficos. A non ser que teña un motivo, non o escolla. Isto reduce o tamaño do ficheiro PDF.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="252"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="251"/>
<source>Enable the security features in your exported PDF. If you selected PDF 1.3, the PDF will be protected by 40 bit encryption. If you selected PDF 1.4, the PDF will be protected by 128 bit encryption. Disclaimer: PDF encryption is not as reliable as GPG or PGP encryption and does have some limitations.</source>
<translation>Permitir as características de seguranza no PDF exportado. Se escolle PDF 1.3, o PDF protexerase cun cifrado de 40 bits. Se escolle PDF 1.4 o PDF protexerase cun cifrado de 128 bits. Advertencia: o cifrado do PDF non é de tanta confianza como o cifrado GPG ou PGP e ten as súas limitacións.</translation>
</message>
38009,7 → 37860,7
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.ui" line="1104"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="522"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="521"/>
<source>No Script</source>
<translation>Sen script</translation>
</message>
38036,17 → 37887,17
ao abrir o documento PDF:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="224"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="223"/>
<source>Enables presentation effects when using Adobe&amp;#174; Reader&amp;#174; and other PDF viewers which support this in full screen mode.</source>
<translation>Permite os efectos de presentación ao utilizar o Adobe&amp;#174; Reader&amp;#174; e outros lectores de PDF que permitan isto en modo a pantalla completa.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="205"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="204"/>
<source>Do not show objects outside the margins in the exported file</source>
<translation>Non mostrar os obxectos que fiquen por fóra das marxes no ficheiro exportado</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="229"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="228"/>
<source>Length of time the page is shown before the presentation starts on the selected page. Setting 0 will disable automatic page transition.</source>
<translation>Tempo durante o que se mostra a páxina antes de que se inicie a presentación nunha páxina seleccionada. Se se fixa en 0 desactívase a transición automática de páxinas.</translation>
</message>
38121,22 → 37972,22
<translation>Pré-impresión</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="217"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="216"/>
<source>Method of compression to use for images. Automatic allows Scribus to choose the best method. ZIP is lossless and good for images with solid colors. JPEG is better at creating smaller PDF files which have many photos (with slight image quality loss possible). Leave it set to Automatic unless you have a need for special compression options.</source>
<translation>Método de compresión a usar coas imaxes. Automático permite que Scribus escolla o mellor método. ZIP non ten perdas e é bon para imaxes con cores sólidas. JPEG é mellor para crear ficheiros PDF máis pequenos con moitas fotos (cunha posíbel perda de calidade de imaxe). Déixeo en automática a non ser que precise de opcións de compresión especiais.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="218"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="217"/>
<source>Compression quality levels for lossy compression methods: Minimum (25%), Low (50%), Medium (75%), High (85%), Maximum (95%). Note that a quality level does not directly determine the size of the resulting image - both size and quality loss vary from image to image at any given quality level. Even with Maximum selected, there is always some quality loss with jpeg.</source>
<translation>Niveis de calidade da compresión para métodos de compresión con perda: Mínima (25%), Media (75%), Alta (85%), Máxima (95%). Teña en conta que un nivel de calidade non determina directamente o tamaño da imaxe resultante - tanto o tamaño como a perda de calidade varían de imaxe a imaxe en calquera nivel de calidade. Mesmo cando se selecciona Máxima, haberá sempre certa perda de calidade con jpeg.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="703"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="702"/>
<source>Inside:</source>
<translation>Dentro:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="704"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="703"/>
<source>Outside:</source>
<translation>Fóra:</translation>
</message>
38156,92 → 38007,92
<translation>Resolución máxima da imaxe:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="238"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="237"/>
<source>Show the document in single page mode</source>
<translation>Mostrar o documento en modo de páxina única</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="239"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="238"/>
<source>Show the document in single page mode with the pages displayed continuously end to end like a scroll</source>
<translation>Mostrar o documento nunha páxina única coas páxinas seguidas, pegadas como se for papel continuo</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="240"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="239"/>
<source>Show the document with facing pages, starting with the first page displayed on the left</source>
<translation>Mostrar o documento con páxinas enfrontadas, comezando coa primeira páxina á esquerda</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="241"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="240"/>
<source>Show the document with facing pages, starting with the first page displayed on the right</source>
<translation>Mostrar o documento con páxinas enfrontadas, comezando coa primeira páxina á dereita</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="242"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="241"/>
<source>Use the viewer&apos;s defaults or the user&apos;s preferences if set differently from the viewer defaults</source>
<translation>Empregar as predefinicións do usuario ou as súas preferencias de seren diferentes das predefinicións do visor</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="243"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="242"/>
<source>Enables viewing the document in full screen</source>
<translation>Activa a previsualización do documento a pantalla completa</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="244"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="243"/>
<source>Display the bookmarks upon opening</source>
<translation>Mostrar os marcadores ao abrir</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="245"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="244"/>
<source>Display the page thumbnails upon opening</source>
<translation>Mostrar as miniaturas das páxinas ao abrir</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="246"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="245"/>
<source>Forces the displaying of layers. Useful only for PDF 1.5+.</source>
<translation>Obriga a que se mostren as capas. Só resulta útil para PDF 1.5+.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="247"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="246"/>
<source>Hides the Tool Bar which has selection and other editing capabilities</source>
<translation>Agocha a barra de ferramentas, que ten selección e outras opcións de edición</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="219"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="218"/>
<source>Limits the resolution of your bitmap images to the selected DPI. Images with a lower resolution will be left untouched. Leaving this unchecked will render them at their native resolution. Enabling this will increase memory usage and slow down export.</source>
<translation>Limita a resolución das imaxes de mapas de bits aos PPP escollidos. As imaxes de menor resolución non se tocarán. Se non se selecciona isto, mostraranse na súa resolución orixinal. Se se activa aumentará o uso de memoria e enlentecerá a exportación.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="273"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="272"/>
<source>Creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing</source>
<translation>Crea marcas de recorte no PDF que indican por onde hai que cortar o papel unha vez impreso</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="274"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="273"/>
<source>This creates bleed marks which are indicated by _ . _ and show the bleed limit</source>
<translation>Isto crea marcas de sangrado que se indican mediante _._ e mostran os limites de sangrado</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="275"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="274"/>
<source>Add registration marks to each separation</source>
<translation>Engadir marcas de rexistro a cada separación</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="276"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="275"/>
<source>Add color calibration bars</source>
<translation>Engadir barras de calibración da cor</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="277"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="276"/>
<source>Add document information which includes the document title and page numbers</source>
<translation>Engadir información do documento que inclúe o título do documento e os números de páxina</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="279"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="278"/>
<source>Indicate the distance offset for the registration marks</source>
<translation>Indicar a distancia das marcas de rexistro</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="284"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="283"/>
<source>Use the existing bleed settings from the document preferences</source>
<translation>Empregar a configuración de sangrado existente para as preferencias do documento</translation>
</message>
38262,41 → 38113,41
<translation>&amp;Aplicar o efecto a todas as páxinas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="198"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="197"/>
<source>Automatically rotate the exported pages</source>
<translation>Xirar automaticamente as páxinas exportadas</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="208"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="207"/>
<source>Determines the PDF compatibility.&lt;br/&gt;The default is &lt;b&gt;PDF 1.3&lt;/b&gt; which gives the widest compatibility.&lt;br/&gt;Choose &lt;b&gt;PDF 1.4&lt;/b&gt; if your file uses features such as transparency or you require 128 bit encryption.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; is necessary when you wish to preserve objects in separate layers within the PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; is for blind exchange with colors strictly specified in CMYK or spot colors.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; is for exporting the PDF when you want color managed RGB for commercial printing and is selectable when you have activated color management. Use only when advised by your printer or in some cases printing to a 4 color digital color laser printer.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; is an extension of PDF/X-3 to support transparency and layering.</source>
<translation>Determina a compatibilidade PDF.&lt;br/&gt;Por omisión é &lt;b&gt;PDF 1.3&lt;/b&gt;, que permite a maior compatibilidade.&lt;br/&gt;Escolla &lt;b&gt;PDF 1.4&lt;/b&gt; se o ficheiro emprega funcións como a transparencia ou se precisa de cifrado de 128 bits.&lt;br/&gt;&lt;b&gt;PDF 1.5&lt;/b&gt; é necesario se pretende manter os obxectos en capas separadas dentro do PDF.&lt;br/&gt;&lt;b&gt;PDF/X-1a&lt;/b&gt; é para o intercambio cego con cores estritamente indicadas en CMYK ou manchas de cor.&lt;br/&gt;&lt;b&gt;PDF/X-3&lt;/b&gt; é para exportar o PDF cando fai falta a xestión de cor RGB para a impresión comercial e pódese seleccionar cando se activa a xestión da cor. Emprégueo só cando llo indique a imprenta ou nalgúns casos ao imprimir nunha impresora laser de catro cores.&lt;br/&gt;&lt;b&gt;PDF/X-4&lt;/b&gt; é unha extensión de PDF/X-3 para permitir transparencia e capas.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="215"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="214"/>
<source>Export PDFs in image frames as embedded PDFs. This does *not* yet take care of colorspaces, so you should know what you are doing before setting this to &apos;true&apos;.</source>
<translation>Exportar PDF en molduras de imaxe como PDF incorporados. Isto aínda *non* ten en conta os espazos de cores, de xeito que hai que saber o que se está a facer antes de dicir que «si».</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="680"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="876"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="679"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="875"/>
<source>Push</source>
<translation>Premer</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="681"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="877"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="680"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="876"/>
<source>Cover</source>
<translation>Tapar</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="682"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="878"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="681"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="877"/>
<source>Uncover</source>
<translation>Descubrir</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="683"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="879"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="682"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="878"/>
<source>Fade</source>
<translation>Esvaecer</translation>
</message>
38322,7 → 38173,7
<translation>Lonxitude:</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="278"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="277"/>
<source>Indicate the size of crops&apos;marks</source>
<translation>Indicar o tamaño das marcas de recorte</translation>
</message>
38332,12 → 38183,12
<translation>Configuración da calidade das imaxes</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="253"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="252"/>
<source>Choose an owner password which enables or disables all the security features in your exported PDF</source>
<translation>Escolla un contrasinal de propietario que active ou desactive todas as funcionalidades de seguranza do PDF que vai exportar</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="204"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="203"/>
<source>Create a range of pages</source>
<translation>Crear un intervalo de páxinas</translation>
</message>
38382,17 → 38233,17
<translation>Todo o &amp;subconxunto</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="225"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="224"/>
<source>Embed only subset fonts with glyphs used in the document into the PDF.</source>
<translation>Incorporar ao PDF só os subconxuntos de tipos de letras con glifos empregados no documento.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="262"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="261"/>
<source>This is an advanced setting which is not enabled by default. This should only be enabled when specifically requested by your printer and they have given you the exact details needed. Otherwise, your exported PDF may not print properly and is truly not portable across systems.</source>
<translation>Esta é unha configuración avanzada que non se activa por omisión. Só se debería permitir se o require explicitamente a imprenta e lle forneceron os detalles precisos. De non ser así, o PDF exportado pode non imprimirse adecuadamente e con certeza non se poderá portar entre sistemas.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="201"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="200"/>
<source>Insert a comma separated list of tokens where a token can be * for all the pages, 1-5 for a range of pages or a single page number</source>
<translation>Insira aquí unha listaxe separada por vírgulas de elementos, na que
un elemento pode ser * para todas as páxinas, 1-5 para
38399,42 → 38250,42
un intervalo de páxinas ou un único número de páxina</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="211"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="210"/>
<source>Generate PDF Articles, which is useful for navigating linked articles in a PDF</source>
<translation>Xerar artigos de PDF, que é útil para navegar entre artigos ligados nun PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="212"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="211"/>
<source>Layers in your document are exported to the PDF. Only available if PDF 1.5 is chosen.</source>
<translation>As capas do documento expórtanse ao PDF. Só é posíbel se se escolle PDF 1.5.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="220"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="219"/>
<source>DPI (Dots Per Inch) for image export</source>
<translation>PPP (puntos por polgada) para a exportación das imaxes</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="254"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="253"/>
<source>Choose a password for users to be able to read your PDF</source>
<translation>Escoller un contrasinal para que os usuarios poidan ler este PDF</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="256"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="255"/>
<source>Allow modifying of the PDF. If unchecked, modifying the PDF is prevented.</source>
<translation>Permitir modificar o PDF. Se non se escolle impídese a modificación do PDF.</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="248"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="247"/>
<source>Hides the Menu Bar for the viewer, the PDF will display in a plain window</source>
<translation>Agocha a barra do menú do visor; o PDF exhíbese nunha xanela normal</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="249"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="248"/>
<source>Fit the document page or pages to the available space in the viewer window</source>
<translation>Axustar a páxina ou páxinas do documento ao espazo dispoñíbel na xanela do visor</translation>
</message>
<message>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="255"/>
<location filename="../../scribus/ui/tabpdfoptions.cpp" line="254"/>
<source>Allow printing of the PDF. If unchecked, printing is prevented.</source>
<translation>Permitir que se imprima o PDF. Se non se selecciona impídese que se imprima.</translation>
</message>
38602,75 → 38453,6
</message>
</context>
<context>
<name>Test_XYZBase</name>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="20"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="20"/>
<source>X, Y, Z</source>
<translation>X, Y, Z</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="53"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="53"/>
<source>Name:</source>
<translation>Nome:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="106"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="116"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="129"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="139"/>
<source>W:</source>
<translation>An:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="152"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="162"/>
<source>Lock</source>
<translation>Bloquear</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="171"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="181"/>
<source>Y:</source>
<translation>A:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="194"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="204"/>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="222"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="232"/>
<source>Flip:</source>
<translation>Voltear:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="267"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="277"/>
<source>Lock:</source>
<translation>Bloqueo:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="335"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="345"/>
<source>Rotation:</source>
<translation>Rotación:</translation>
</message>
<message>
<location filename="../../scribus/ui/test_xyz.ui" line="361"/>
<location filename="../../scribus/ui/test_xyzbase.ui" line="371"/>
<source>Level:</source>
<translation>Nivel:</translation>
</message>
</context>
<context>
<name>TextPalette</name>
<message>
<location filename="../../scribus/ui/textpalette.cpp" line="351"/>
40506,99 → 40288,6
</message>
</context>
<context>
<name>XYZ</name>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="20"/>
<location filename="../../scribus/ui/xyz3.ui" line="20"/>
<location filename="../../scribus/ui/xyz4.ui" line="20"/>
<location filename="../../scribus/ui/xyz5.ui" line="20"/>
<source>X, Y, Z</source>
<translation>X, Y, Z</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="41"/>
<location filename="../../scribus/ui/xyz3.ui" line="41"/>
<location filename="../../scribus/ui/xyz4.ui" line="70"/>
<location filename="../../scribus/ui/xyz5.ui" line="53"/>
<source>Name:</source>
<translation>Nome:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="67"/>
<location filename="../../scribus/ui/xyz3.ui" line="365"/>
<location filename="../../scribus/ui/xyz4.ui" line="103"/>
<source>Position [X,Y]:</source>
<translation>Posición [X,Y]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="173"/>
<location filename="../../scribus/ui/xyz3.ui" line="310"/>
<location filename="../../scribus/ui/xyz4.ui" line="156"/>
<source>Size [W,H]:</source>
<translation>Tamaño [An,Al]:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="241"/>
<location filename="../../scribus/ui/xyz3.ui" line="352"/>
<location filename="../../scribus/ui/xyz4.ui" line="366"/>
<location filename="../../scribus/ui/xyz5.ui" line="335"/>
<source>Rotation:</source>
<translation>Rotación:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="303"/>
<location filename="../../scribus/ui/xyz3.ui" line="372"/>
<location filename="../../scribus/ui/xyz4.ui" line="412"/>
<location filename="../../scribus/ui/xyz5.ui" line="361"/>
<source>Level:</source>
<translation>Nivel:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz2.ui" line="386"/>
<source>99</source>
<translation>99</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz3.ui" line="145"/>
<location filename="../../scribus/ui/xyz4.ui" line="216"/>
<location filename="../../scribus/ui/xyz5.ui" line="222"/>
<source>Flip:</source>
<translation>Voltear:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz3.ui" line="197"/>
<location filename="../../scribus/ui/xyz4.ui" line="285"/>
<location filename="../../scribus/ui/xyz5.ui" line="267"/>
<source>Lock:</source>
<translation>Bloqueo:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="106"/>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="129"/>
<source>W:</source>
<translation>An:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="152"/>
<source>Lock</source>
<translation>Bloquear</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="171"/>
<source>Y:</source>
<translation>A:</translation>
</message>
<message>
<location filename="../../scribus/ui/xyz5.ui" line="194"/>
<source>H:</source>
<translation>H:</translation>
</message>
</context>
<context>
<name>XarPlug</name>
<message>
<location filename="../../scribus/plugins/import/xar/importxar.cpp" line="247"/>