Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 18405 → Rev 18406

/trunk/Scribus/resources/translations/scribus.zh_TW.ts
0,0 → 1,51800
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="zh_TW">
<context>
<name></name>
<message>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">
getColorNames() -&gt; list
 
傳回檔案中所有已定義顏色名稱的列表
</translation>
</message>
<message>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
顯示 &quot;新建檔案&quot; 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵,
檔案將不會新建. 如果新檔案已經新增, 傳回 &quot;真&quot;.
</translation>
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
開新的 pageName 的主頁, 並打開它來編輯.
</translation>
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
刪除已命名的主頁
</translation>
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主).
</translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
開新的 pageName 的主頁, 並打開它來編輯.
</translation>
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
刪除已命名的主頁
</translation>
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>getChild(object, childname, ofclass=None, recursive=True)
 
Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</source>
<translation type="obsolete">getChild(object, childname, ofclass=None, recursive=True)
 
Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</translation>
</message>
<message>
<source>getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)
 
Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
 
See QObject::children() in the Qt docs for more information.
</source>
<translation type="obsolete">getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)
 
Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
 
See QObject::children() in the Qt docs for more information.
</translation>
</message>
<message>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">
getColorNames() -&gt; list
 
傳回檔案中所有已定義顏色名稱的列表
</translation>
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius isexpressed in points. If &quot;name&quot; is not given the currentlyselected item is used.
</source>
<translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius isexpressed in points. If &quot;name&quot; is not given the currentlyselected item is used.
</translation>
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="obsolete">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
顯示 &quot;新建檔案&quot; 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵,
檔案將不會新建. 如果新檔案已經新增, 傳回 &quot;真&quot;.
</translation>
</message>
<message>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positve values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positve values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<source>saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="obsolete">saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the printable set to
false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the printable set to
false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<source>textFlowsAroundFrame(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional boolean &quot;state&quot;. If &quot;state&quot;
is not passed, text flow is toggled.
</source>
<translation type="obsolete">textFlowsAroundFrame(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional boolean &quot;state&quot;. If &quot;state&quot;
is not passed, text flow is toggled.
</translation>
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主).
</translation>
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="345"/>
<source>Analyzing File:</source>
<translation>分析檔案:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="3448"/>
<source>Generating Items</source>
<translation>產生物件中</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="2348"/>
<source>Group%1</source>
<translation>群組%1</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/ai/importai.cpp" line="342"/>
<source>Importing: %1</source>
<translation>正在匯入: %1</translation>
</message>
</context>
<context>
<name>About</name>
<message>
<location filename="../../../scribus/ui/about.cpp" line="125"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="133"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
<translation type="obsolete">&lt;b&gt;Scribus 版本 %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="180"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="647"/>
<source>Abort Update Check</source>
<translation>中止更新檢查</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="182"/>
<source>&amp;About</source>
<translation>關於 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="97"/>
<source>About Scribus %1</source>
<translation>關於 Scribus %1</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="195"/>
<source>A&amp;uthors</source>
<translation>作者 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="346"/>
<source>Bugs and Feature Requests</source>
<translation>回報錯誤及功能請求</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="180"/>
<source>Build ID:</source>
<translation>編譯 ID:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="227"/>
<location filename="../../../scribus/ui/about.cpp" line="649"/>
<source>Check for Updates</source>
<translation>檢查是否有更新</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="271"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>檢查是否有 Scribus 的更新。這不會從你的電腦裡傳送任何資料。</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="259"/>
<source>&amp;Close</source>
<translation>關閉 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="300"/>
<source>Contributions from:</source>
<translation>貢獻者: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="348"/>
<source>Developer Blog</source>
<translation>開發者部落格</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="292"/>
<source>Development Team:</source>
<translation>開發團隊:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="340"/>
<source>Homepage</source>
<translation>首頁</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="234"/>
<source>&amp;Licence</source>
<translation>許可 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="294"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua 移植:</translation>
</message>
<message>
<source>Mac OSX Aqua Port:</source>
<translation type="obsolete">Mac OSX Aqua 移植: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="350"/>
<source>Mailing List</source>
<translation>郵遞列表</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="269"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>遺失的函式庫支援以 * 表示。這同時也顯示 Scribus 偵測到的 Ghostscript 版本。</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="179"/>
<source>No Ghostscript version available</source>
<translation>沒有可用的 Ghostscript 版本 </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="302"/>
<source>Official Documentation:</source>
<translation>官方文件: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="324"/>
<source>Official Translations and Translators:</source>
<translation>官方翻譯及翻譯者: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="220"/>
<source>&amp;Online</source>
<translation>線上資料 (&amp;O)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="342"/>
<source>Online Reference</source>
<translation>線上參考資料</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="296"/>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; 移植:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="306"/>
<source>Other Documentation:</source>
<translation>其他文件: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="326"/>
<source>Previous Translation Contributors:</source>
<translation>先前翻譯貢獻者: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="180"/>
<source>Scribus Version</source>
<translation>Scribus 版本</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="310"/>
<source>Splash Screen:</source>
<translation>起始視窗:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="312"/>
<source>Tango Project Icons:</source>
<translation>Tango Project Icons:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="268"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>C-C-T-F 其中 C=littlecms, C=CUPS, T=TIFF 支援, F=Fontconfig 支援。最後一個字母是渲染器, C=cairo 或 Q=Qt</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="270"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>Windows 版本沒有使用 fontconfig 或 CUPS 函式庫。</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="267"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>這個面板顯示版本, 編譯日期, 和 Scribus 中編譯進函式庫的支援。</translation>
</message>
<message>
<source>This panel shows the version, build date and compiled in library support in Scribus.
The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation type="obsolete">這個面板顯示Scribus版本, 編譯日期, 並且已經編譯到 Scribus 的支援的函式庫中,
這裡 C-C-T-F 指的是 C=littlecms C=CUPS T=TIFF 支援 F=Fontconfig, 最後一個字母是渲染器(?)
C=cairo 或者 A=libart。不存在的支援函式庫以*號表示. 這個也註明瞭Scribus檢測到的Ghostscript版本號碼
</translation>
</message>
<message>
<source>This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation type="obsolete">這個面板顯示版本, 編譯日期, 和支援 Scribus 的 library。C-C-T-F 代表 C=littlecms C=CUPS T=TIFF 支援 F=Fontconfig 支援。</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="209"/>
<source>&amp;Translations</source>
<translation>翻譯 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="243"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>無法打開許可檔案。要取得許可資訊, 請查看你安裝的目錄或是 Scribus 的檔案。</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="223"/>
<source>&amp;Updates</source>
<translation>更新 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="177"/>
<source>Using Ghostscript version %1</source>
<translation>使用的 Ghostscript 版本 %1</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="344"/>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<source>Windows Port:</source>
<translation type="obsolete">Windows 移植: </translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="298"/>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; 移植:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="304"/>
<source>Doc Translators:</source>
<translation>文件翻譯:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="308"/>
<source>Webmasters:</source>
<translation>網站管理:</translation>
</message>
<message>
<location filename="../../../scribus/ui/about.cpp" line="443"/>
<location filename="../../../scribus/ui/about.cpp" line="557"/>
<location filename="../../../scribus/ui/about.cpp" line="624"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>無法開啟檔案 %1。請檢查你的安裝目錄或瀏覽 Scribus 的網站來獲得 %1 的資訊。</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation>作者:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation>版權:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation>描述:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation>啓用:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation>檔案名:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation>授權:</translation>
</message>
<message>
<source>No</source>
<translation type="obsolete">否</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation>發佈日期:</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: 關於插件</translation>
</message>
<message>
<location filename="../../../scribus/ui/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation>版本:</translation>
</message>
<message>
<source>Yes</source>
<translation type="obsolete">是</translation>
</message>
</context>
<context>
<name>AboutPluginsBase</name>
<message>
<source>Alt+C</source>
<translation type="obsolete">Alt+C</translation>
</message>
<message>
<source>Author(s):</source>
<translation type="obsolete">作者:</translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="obsolete">關閉 (&amp;C)</translation>
</message>
<message>
<source>Copyright:</source>
<translation type="obsolete">版權:</translation>
</message>
<message>
<source>Description:</source>
<translation type="obsolete">描述:</translation>
</message>
<message>
<source>Enabled:</source>
<translation type="obsolete">啓用:</translation>
</message>
<message>
<source>File Name:</source>
<translation type="obsolete">檔案名:</translation>
</message>
<message>
<source>License:</source>
<translation type="obsolete">授權:</translation>
</message>
<message>
<source>Release Date:</source>
<translation type="obsolete">發佈日期:</translation>
</message>
<message>
<source>Scribus: About Plug-ins</source>
<translation type="obsolete">Scribus: 關於插件</translation>
</message>
<message>
<source>Version:</source>
<translation type="obsolete">版本:</translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<source>&amp;%1 %</source>
<translation type="obsolete">%1 % (&amp;%)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1473"/>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1588"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1589"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1590"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1586"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1587"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1681"/>
<source>&amp;About Plugins</source>
<translation>關於插件 (&amp;A)</translation>
</message>
<message>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">關於插件 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1682"/>
<source>About &amp;Qt</source>
<translation>關於 &amp;Qt</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1680"/>
<source>&amp;About Scribus</source>
<translation>關於 Scribus (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1619"/>
<source>Action &amp;History</source>
<translation>歷史動作 (&amp;H)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1532"/>
<source>Adjust Frame to Image</source>
<translation>調整框體適應圖片大小</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1455"/>
<source>Advanced Select All...</source>
<translation>進階全部選擇...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1621"/>
<source>&amp;Align and Distribute</source>
<translation>對齊和分佈 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1486"/>
<source>&amp;All Caps</source>
<translation>全部大寫 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1541"/>
<source>Annotation P&amp;roperties</source>
<translation>注釋屬性 (&amp;R)</translation>
</message>
<message>
<source>Apostrophe</source>
<translation type="obsolete">上標點</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1724"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>上標點</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1428"/>
<source>Append &amp;Text...</source>
<translation>追加文字 (&amp;T)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1578"/>
<source>&amp;Apply Master Page...</source>
<translation>套用主頁 (&amp;A)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1616"/>
<source>&amp;Arrange Pages</source>
<translation>安排頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1544"/>
<source>&amp;Attach Text to Path</source>
<translation>將文字附到路徑上 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1515"/>
<source>&amp;Attributes...</source>
<translation>特性 (&amp;A)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1548"/>
<source>&amp;Bezier Curve</source>
<translation>貝茲曲線 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1479"/>
<source>&amp;Block</source>
<translation>區塊 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1617"/>
<source>&amp;Bookmarks</source>
<translation>書籤 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1717"/>
<source>Bullet</source>
<translation>項目符號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1676"/>
<source>&amp;Cascade</source>
<translation>層疊 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1477"/>
<source>&amp;Center</source>
<translation>中間 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1690"/>
<source>Check for Updates</source>
<translation>檢查是否有更新</translation>
</message>
<message>
<source>CJK Double Left</source>
<translation type="obsolete">中日韓雙左</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1740"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>中日韓雙左</translation>
</message>
<message>
<source>CJK Double Right</source>
<translation type="obsolete">中日韓雙右</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1741"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>中日韓雙右</translation>
</message>
<message>
<source>CJK Single Left</source>
<translation type="obsolete">中日韓左單</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1738"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>中日韓左單</translation>
</message>
<message>
<source>CJK Single Right</source>
<translation type="obsolete">中日韓右單</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1739"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>中日韓右單</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1453"/>
<source>C&amp;lear</source>
<translation>清除 (&amp;L)</translation>
</message>
<message>
<source>C&amp;lear Contents</source>
<translation type="obsolete">清除內容 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1422"/>
<source>&amp;Close</source>
<translation>關閉 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1426"/>
<source>Collect for O&amp;utput...</source>
<translation>準備輸出 (&amp;U)...</translation>
</message>
<message>
<source>C&amp;olors...</source>
<translation type="obsolete">顔色 (&amp;O)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1710"/>
<source>Column Break</source>
<translation>分列</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1546"/>
<source>&amp;Combine Polygons</source>
<translation>合併多邊形 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1579"/>
<source>Convert to Master Page...</source>
<translation>轉換爲主頁...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1447"/>
<location filename="../../../scribus/actionmanager.cpp" line="1449"/>
<source>&amp;Copy</source>
<translation>複製 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1640"/>
<source>Copy Item Properties</source>
<translation>複製物件屬性</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1576"/>
<source>&amp;Copy...</source>
<translation>複製 (&amp;C)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1713"/>
<source>Copyright</source>
<translation>版權</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1446"/>
<source>Cu&amp;t</source>
<translation>剪下 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1671"/>
<source>Dehyphenate Text</source>
<translation>取消連字元</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1500"/>
<source>&amp;Delete</source>
<translation>刪除 (&amp;D)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1575"/>
<source>&amp;Delete...</source>
<translation>刪除 (&amp;D)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1456"/>
<source>&amp;Deselect All</source>
<translation>取消全選 (&amp;D)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1545"/>
<source>&amp;Detach Text from Path</source>
<translation>從路徑分離文字 (&amp;D)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1436"/>
<source>Document &amp;Setup...</source>
<translation>檔案設定 (&amp;S)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1728"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>雙面左邊</translation>
</message>
<message>
<source>Double Left</source>
<translation type="obsolete">雙面左邊</translation>
</message>
<message>
<source>Double Left Guillemet</source>
<translation type="obsolete">左雙引號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1734"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>左雙引號</translation>
</message>
<message>
<source>Double Reversed</source>
<translation type="obsolete">雙面反轉</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1731"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>雙面反轉</translation>
</message>
<message>
<source>Double Right</source>
<translation type="obsolete">雙面右邊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1729"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>雙面右邊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1735"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>右雙引號</translation>
</message>
<message>
<source>Double Right Guillemet</source>
<translation type="obsolete">右雙引號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1497"/>
<source>D&amp;uplicate</source>
<translation>複製 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1633"/>
<source>Edit Contents of Frame</source>
<translation>編輯框內容</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1458"/>
<source>Edit Image...</source>
<translation>編輯圖片...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1543"/>
<source>&amp;Edit Shape...</source>
<translation>編輯形狀 (&amp;E)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1459"/>
<source>Edit Source...</source>
<translation>編輯來源...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1634"/>
<source>Edit Text...</source>
<translation>編輯文字...</translation>
</message>
<message>
<source>Edit the text with the Story Editor</source>
<translation type="obsolete">用故事編輯器編輯文字</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1719"/>
<source>Em Dash</source>
<translation>Em 破折號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1744"/>
<source>Em Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1720"/>
<source>En Dash</source>
<translation>En 破折號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1743"/>
<source>En Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1535"/>
<source>Extended Image Properties</source>
<translation>圖片延伸屬性</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1623"/>
<source>Inline Frames</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1639"/>
<source>&amp;Eye Dropper</source>
<translation>取色器 (&amp;E)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1750"/>
<source>ff</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1753"/>
<source>ffi</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1754"/>
<source>ffl</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1751"/>
<source>fi</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1542"/>
<source>Field P&amp;roperties</source>
<translation>文字域屬性 (&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1721"/>
<source>Figure Dash</source>
<translation>圖形破折號</translation>
</message>
<message>
<source>&amp;Fit in window</source>
<translation type="obsolete">符合視窗 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1584"/>
<source>&amp;Fit to Height</source>
<translation>符合高度 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1585"/>
<source>Fit to Width</source>
<translation>符合寬度</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1752"/>
<source>fl</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1507"/>
<source>&amp;Flip Horizontally</source>
<translation>水平翻轉 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1508"/>
<source>&amp;Flip Vertically</source>
<translation>垂直翻轉 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1480"/>
<source>&amp;Forced</source>
<translation>強制 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1709"/>
<source>Frame Break</source>
<translation>分框</translation>
</message>
<message>
<source>&amp;Frame...</source>
<translation type="obsolete">框體 (&amp;F)...</translation>
</message>
<message>
<source>&amp;Freehand Line</source>
<translation type="obsolete">手繪線 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1755"/>
<source>ft</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1538"/>
<source>&amp;Full Resolution</source>
<translation>完全解析度 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1672"/>
<source>&amp;Generate Table Of Contents</source>
<translation>產生目錄索引 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1429"/>
<source>Get Image...</source>
<translation> 匯入影像...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1427"/>
<source>Get Text...</source>
<translation>匯入文字...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1430"/>
<source>Get Vector File...</source>
<translation>取得向量檔案...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1689"/>
<source>Getting Started with Scribus</source>
<translation>開始使用 Scribus</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1560"/>
<source>&amp;Glyph...</source>
<translation>符號 (&amp;G)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1501"/>
<source>&amp;Group</source>
<translation>群組 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1748"/>
<source>Hair Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1670"/>
<source>&amp;Hyphenate Text</source>
<translation>用連字元連字 (&amp;H)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1493"/>
<source>&amp;Image Effects</source>
<translation>圖像效果 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1549"/>
<source>&amp;Image Frame</source>
<translation>圖片框 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1517"/>
<source>I&amp;mage Visible</source>
<translation>顯示圖像 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1574"/>
<source>Im&amp;port...</source>
<translation>匯入 (&amp;P)...</translation>
</message>
<message>
<source>Insert Bezier Curve</source>
<translation type="obsolete">插入貝茲曲線</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1652"/>
<source>Insert &amp;Bezier Curve</source>
<translation>插入貝茲曲線 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1653"/>
<source>Insert &amp;Freehand Line</source>
<translation>插入手繪線 (&amp;F)</translation>
</message>
<message>
<source>Insert Freehand Line</source>
<translation type="obsolete">插入手繪線</translation>
</message>
<message>
<source>Insert Image Frame</source>
<translation type="obsolete">插入圖片框</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1643"/>
<source>Insert &amp;Image Frame</source>
<translation>插入圖片框 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1650"/>
<source>Insert &amp;Line</source>
<translation>插入線 (&amp;L)</translation>
</message>
<message>
<source>Insert Line</source>
<translation type="obsolete">插入線</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1662"/>
<source>Insert Link Annotation</source>
<translation>插入連結註釋</translation>
</message>
<message>
<source>Insert Non Breaking Dash</source>
<translation type="obsolete">插入不間斷破折號</translation>
</message>
<message>
<source>Insert Non Breaking Space</source>
<translation type="obsolete">插入不間斷空格</translation>
</message>
<message>
<source>Insert Page Number</source>
<translation type="obsolete">插入頁碼</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1658"/>
<source>Insert PDF Check Box</source>
<translation>插入 PDF 核取方塊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1659"/>
<source>Insert PDF Combo Box</source>
<translation>插入 PDF 選擇方塊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1660"/>
<source>Insert PDF List Box</source>
<translation>插入 PDF 清單方塊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1655"/>
<source>Insert PDF Push Button</source>
<translation>插入 PDF 按鈕</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1657"/>
<source>Insert PDF Text Field</source>
<translation>插入 PDF 文字框</translation>
</message>
<message>
<source>Insert Polygon</source>
<translation type="obsolete">插入多邊形</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1647"/>
<source>Insert &amp;Polygon</source>
<translation>插入多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1644"/>
<source>Insert &amp;Render Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Insert Shape</source>
<translation type="obsolete">插入形狀</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1646"/>
<source>Insert &amp;Shape</source>
<translation>插入形狀 (&amp;S)</translation>
</message>
<message>
<source>Insert Smart Hyphen</source>
<translation type="obsolete">插入智慧型連字元</translation>
</message>
<message>
<source>Insert Table</source>
<translation type="obsolete">插入表格</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1645"/>
<source>Insert T&amp;able</source>
<translation>插入表格 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1661"/>
<source>Insert Text Annotation</source>
<translation>插入文字註釋</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1642"/>
<source>Insert &amp;Text Frame</source>
<translation>插入文字框 (&amp;T)</translation>
</message>
<message>
<source>Insert Text Frame</source>
<translation type="obsolete">插入文字框</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1695"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1573"/>
<source>&amp;Insert...</source>
<translation>插入 (&amp;I)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1504"/>
<source>Is &amp;Locked</source>
<translation>鎖定 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1540"/>
<source>Is PDF A&amp;nnotation</source>
<translation>爲 PDF 注釋 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1539"/>
<source>Is PDF &amp;Bookmark</source>
<translation>爲 PDF 書籤 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1445"/>
<source>&amp;Item Action Mode</source>
<translation>物件動作模式 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1466"/>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScripts...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1615"/>
<source>&amp;Layers</source>
<translation>圖層 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1476"/>
<source>&amp;Left</source>
<translation>左 (&amp;L)</translation>
</message>
<message>
<source>&amp;Line</source>
<translation type="obsolete">線條 (&amp;L)</translation>
</message>
<message>
<source>&amp;Line Styles...</source>
<translation type="obsolete">線條樣式 (&amp;L)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1635"/>
<source>Link Text Frames</source>
<translation>串聯文字框</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1737"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>下雙逗號</translation>
</message>
<message>
<source>Low Double Comma</source>
<translation type="obsolete">下雙逗號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1536"/>
<source>&amp;Low Resolution</source>
<translation>低解析度 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1736"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>下單逗號</translation>
</message>
<message>
<source>Low Single Comma</source>
<translation type="obsolete">下單逗號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1511"/>
<source>&amp;Lower</source>
<translation>降低 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1509"/>
<source>Lower to &amp;Bottom</source>
<translation>降低到底部 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1580"/>
<source>Manage &amp;Guides...</source>
<translation>管理參考線 (&amp;G)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1669"/>
<source>&amp;Manage Images</source>
<translation>管理圖片 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1581"/>
<source>Manage Page Properties...</source>
<translation>管理頁面屬性...</translation>
</message>
<message>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">管理圖片 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1465"/>
<source>&amp;Master Pages...</source>
<translation>主頁 (&amp;M)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1618"/>
<source>&amp;Measurements</source>
<translation>測量 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1747"/>
<source>Mid Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1718"/>
<source>Middle Dot</source>
<translation>中間點</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1516"/>
<source>More Info...</source>
<translation>更多資訊...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1577"/>
<source>&amp;Move...</source>
<translation>移動 (&amp;M)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1498"/>
<source>&amp;Multiple Duplicate</source>
<translation>多重複製 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1419"/>
<source>&amp;New</source>
<translation>新建 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1708"/>
<source>New Line</source>
<translation>新建線條</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1704"/>
<source>Non Breaking Dash</source>
<translation>不間斷破折號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1705"/>
<source>Non Breaking &amp;Space</source>
<translation>不間斷空格 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1482"/>
<source>&amp;Normal</source>
<translation>普通 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1537"/>
<source>&amp;Normal Resolution</source>
<translation>正常解析度 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1707"/>
<source>Number of Pages</source>
<translation>頁面數</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1421"/>
<source>&amp;Open...</source>
<translation>打開 (&amp;O)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1475"/>
<source>&amp;Other...</source>
<translation>其他 (&amp;O)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1613"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>輪廓 (&amp;O)</translation>
</message>
<message>
<source>&amp;Outline</source>
<translation type="obsolete">輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1490"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>輪廓 (&amp;O)</translation>
</message>
<message>
<source>&amp;Outlines</source>
<translation type="obsolete">輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1550"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1706"/>
<source>Page &amp;Number</source>
<translation>頁碼 (&amp;N)</translation>
</message>
<message>
<source>&amp;Paragraph Styles...</source>
<translation type="obsolete">段落樣式 (&amp;P)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1448"/>
<location filename="../../../scribus/actionmanager.cpp" line="1450"/>
<source>&amp;Paste</source>
<translation>貼上 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1451"/>
<source>Paste (&amp;Absolute)</source>
<translation>絕對貼上 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1625"/>
<source>P&amp;DF Tools</source>
<translation>P&amp;DF 工具</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1551"/>
<source>&amp;Polygon</source>
<translation>多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1438"/>
<source>P&amp;references...</source>
<translation>偏好設定 (&amp;R)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1620"/>
<source>Preflight &amp;Verifier</source>
<translation>印前檢驗器 (&amp;V)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1591"/>
<source>Preview Mode</source>
<translation>預覽模式</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1440"/>
<source>Print Previe&amp;w</source>
<translation>預覽列印 (&amp;W)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1439"/>
<source>&amp;Print...</source>
<translation>列印 (&amp;P)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1506"/>
<source>&amp;Printing Enabled</source>
<translation>允許列印 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1612"/>
<source>&amp;Properties</source>
<translation>屬性 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1441"/>
<source>&amp;Quit</source>
<translation>退出 (&amp;Q)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1722"/>
<source>Quotation Dash</source>
<translation>引用破折號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1512"/>
<source>&amp;Raise</source>
<translation>升高 (&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1510"/>
<source>Raise to &amp;Top</source>
<translation>升高到頂部 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1444"/>
<source>&amp;Redo</source>
<translation>重做 (&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1714"/>
<source>Registered Trademark</source>
<translation>注冊商標</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1461"/>
<source>Replace Colors...</source>
<translation>取代顏色...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1425"/>
<source>Re&amp;vert to Saved</source>
<translation>恢復到已儲存 (&amp;V)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1478"/>
<source>&amp;Right</source>
<translation>右 (&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1629"/>
<source>Rotate Item</source>
<translation>旋轉物件</translation>
</message>
<message>
<source>Rulers relative to Page</source>
<translation type="obsolete">尺規相對應於頁面</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1604"/>
<source>Rulers Relative to Page</source>
<translation>尺規相對應於頁面</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1561"/>
<source>Sample Text</source>
<translation>範例文字</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1423"/>
<source>&amp;Save</source>
<translation>儲存 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1433"/>
<source>Save as &amp;EPS...</source>
<translation>儲存爲 EPS (&amp;E)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1434"/>
<source>Save as P&amp;DF...</source>
<translation>儲存爲 PDF (&amp;D)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1424"/>
<source>Save &amp;As...</source>
<translation>另存新檔 (&amp;A)...</translation>
</message>
<message>
<source>Save Page as &amp;EPS...</source>
<translation type="obsolete">儲存頁面爲 EPS (&amp;E)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1432"/>
<source>Save &amp;Text...</source>
<translation>儲存文字 (&amp;T)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1614"/>
<source>&amp;Scrapbook</source>
<translation>剪貼簿 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1686"/>
<source>Scribus Homepage</source>
<translation>Scribus 首頁</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1685"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribus 使用手冊 (&amp;M)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1687"/>
<source>Scribus Online Documentation</source>
<translation>Scribus 線上文件</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1688"/>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1457"/>
<source>&amp;Search/Replace...</source>
<translation>尋找 / 取代 (&amp;S)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1454"/>
<source>Select &amp;All</source>
<translation>全選 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1628"/>
<source>Select Item</source>
<translation>選擇物件</translation>
</message>
<message>
<source>Send to S&amp;crapbook</source>
<translation type="obsolete">傳送到寄存本 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1491"/>
<source>S&amp;hadow</source>
<translation>陰影 (&amp;H)</translation>
</message>
<message>
<source>&amp;Shape</source>
<translation type="obsolete">形狀 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1600"/>
<source>Show &amp;Baseline Grid</source>
<translation>顯示底線網格 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1593"/>
<source>Show Bleeds</source>
<translation>顯示出血</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1608"/>
<source>Show Context Menu</source>
<translation>顯示內容目錄</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1602"/>
<source>Show Control Characters</source>
<translation>顯示控制字元</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1594"/>
<source>Show &amp;Frames</source>
<translation>顯示框體 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1597"/>
<source>Show &amp;Grid</source>
<translation>顯示網格 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1598"/>
<source>Show G&amp;uides</source>
<translation>顯示參考線 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1596"/>
<source>Show &amp;Images</source>
<translation>顯示圖片 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1595"/>
<source>Show Layer Indicators</source>
<translation>顯示圖層指示</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1592"/>
<source>Show &amp;Margins</source>
<translation>顯示頁面邊距 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1603"/>
<source>Show Rulers</source>
<translation>顯示尺規</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1601"/>
<source>Show &amp;Text Chain</source>
<translation>顯示文字鏈 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1599"/>
<source>Show Text Frame Columns</source>
<translation>顯示文字框的欄</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1726"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>單面左邊</translation>
</message>
<message>
<source>Single Left</source>
<translation type="obsolete">單面左邊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1732"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>左單引號</translation>
</message>
<message>
<source>Single Left Guillemet</source>
<translation type="obsolete">左單引號</translation>
</message>
<message>
<source>Single Reversed</source>
<translation type="obsolete">單面反轉</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1730"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>單面反轉</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1727"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>單面右邊</translation>
</message>
<message>
<source>Single Right</source>
<translation type="obsolete">單面右邊</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1733"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>右單引號</translation>
</message>
<message>
<source>Single Right Guillemet</source>
<translation type="obsolete">右單引號</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1505"/>
<source>Si&amp;ze is Locked</source>
<translation>鎖定尺寸 (&amp;Z)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1487"/>
<source>Small &amp;Caps</source>
<translation>小寫 (&amp;C)</translation>
</message>
<message>
<source>Smart &amp;Hyphen</source>
<translation type="obsolete">智慧連字元 (&amp;H)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1605"/>
<source>Sn&amp;ap to Grid</source>
<translation>吸附到網格 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1606"/>
<source>Sna&amp;p to Guides</source>
<translation>吸附到參考線 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1716"/>
<source>Solidus</source>
<translation>斜線</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1547"/>
<source>Split &amp;Polygons</source>
<translation>分離多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1756"/>
<source>st</source>
<translation></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1562"/>
<source>Sticky Tools</source>
<translation>黏性工具</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1725"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>雙倍直線</translation>
</message>
<message>
<source>Straight Double</source>
<translation type="obsolete">雙倍直線</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1485"/>
<source>&amp;Strike Through</source>
<translation>刪除線 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1462"/>
<source>S&amp;tyles...</source>
<translation>樣式 (&amp;T)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1489"/>
<source>Su&amp;bscript</source>
<translation>下標 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1488"/>
<source>Su&amp;perscript</source>
<translation>上標 (&amp;P)</translation>
</message>
<message>
<source>T&amp;able</source>
<translation type="obsolete">表格 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1494"/>
<source>&amp;Tabulators...</source>
<translation>跳位字元 (&amp;T)...</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1552"/>
<source>&amp;Text Frame</source>
<translation>文字框 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1746"/>
<source>Thick Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1745"/>
<source>Thin Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Thumbnails</source>
<translation type="obsolete">縮圖 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1677"/>
<source>&amp;Tile</source>
<translation>平鋪 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1694"/>
<source>Toggle Guides</source>
<translation>切換參考線</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1693"/>
<source>Toggle Palettes</source>
<translation>切換色板</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1624"/>
<source>&amp;Tools</source>
<translation>工具 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1683"/>
<source>Toolti&amp;ps</source>
<translation>提示 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1715"/>
<source>Trademark</source>
<translation>商標</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1483"/>
<source>&amp;Underline</source>
<translation>底線 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1484"/>
<source>Underline &amp;Words</source>
<translation>增加底線 (&amp;W)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1443"/>
<source>&amp;Undo</source>
<translation>復原 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1502"/>
<source>&amp;Ungroup</source>
<translation>取消群組 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1636"/>
<source>Unlink Text Frames</source>
<translation>解除串聯文字框</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1518"/>
<source>&amp;Update Image</source>
<translation>刷新圖片 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1712"/>
<source>Zero Width NB Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1711"/>
<source>&amp;Zero Width Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1631"/>
<source>Zoom in</source>
<translation>放大</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1630"/>
<source>Zoom in or out</source>
<translation>放大或縮小</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1632"/>
<source>Zoom out</source>
<translation>縮小</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1533"/>
<source>Adjust Image to Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1452"/>
<source>Paste Image from Clipboard</source>
<translation type="unfinished">從剪貼簿貼上圖片</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1460"/>
<source>Colors and Fills...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1463"/>
<source>Marks...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1464"/>
<source>Notes Styles...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1499"/>
<source>&amp;Transform</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1503"/>
<source>Adjust Group</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1513"/>
<source>Patterns</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1514"/>
<source>Inline Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1519"/>
<source>Insert Rows...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1520"/>
<source>Insert Columns...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1521"/>
<source>Delete Rows</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1522"/>
<source>Delete Columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1523"/>
<source>Merge Cells</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1524"/>
<source>Split Cells...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1525"/>
<source>Set Row Heights...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1526"/>
<source>Set Column Widths...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1527"/>
<source>Distribute Rows Evenly</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1528"/>
<source>Distribute Columns Evenly</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1529"/>
<source>Adjust Frame to Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1530"/>
<source>Adjust Table to Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1531"/>
<source>Adjust Frame Height to Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1534"/>
<source>Embed Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1553"/>
<source>&amp;Symbol</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1554"/>
<source>Unweld items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1555"/>
<source>Weld items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1556"/>
<source>Edit weld item</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1559"/>
<source>&amp;Frames...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1563"/>
<source>Anchor Mark</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1564"/>
<source>Variable Text</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1565"/>
<source>Reference to Item</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1566"/>
<source>Reference to Mark</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1567"/>
<source>Foot/Endnote</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1569"/>
<source>Edit Mark</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1570"/>
<source>Update Marks</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1607"/>
<source>Snap to Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1622"/>
<source>Symbols</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1637"/>
<source>Unlink Text Frame with Text Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1638"/>
<source>Unlink Text Frame with Text Cut</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1648"/>
<source>Insert Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1649"/>
<source>Insert Spiral</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1651"/>
<source>Insert Calligraphic Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1656"/>
<source>Insert PDF Radio Button</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1664"/>
<source>Insert 3D Annotation</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1673"/>
<source>&amp;Update Document</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1703"/>
<source>Soft &amp;Hyphen</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1882"/>
<source>File</source>
<translation>檔案</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1882"/>
<source>&amp;File</source>
<translation>檔案 (&amp;F)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1884"/>
<source>Edit</source>
<translation>編輯</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1884"/>
<source>&amp;Edit</source>
<translation>編輯 (&amp;E)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1886"/>
<source>Style</source>
<translation>樣式</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1886"/>
<source>&amp;Style</source>
<translation>樣式 (&amp;S)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1888"/>
<source>Item</source>
<translation>物件</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1888"/>
<source>&amp;Item</source>
<translation>物件 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1890"/>
<source>Insert</source>
<translation>插入</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1890"/>
<source>I&amp;nsert</source>
<translation>插入 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1892"/>
<source>Page</source>
<translation>頁</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1892"/>
<source>&amp;Page</source>
<translation>頁面 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1894"/>
<source>View</source>
<translation>檢視</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1894"/>
<source>&amp;View</source>
<translation>檢視 (&amp;V)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1896"/>
<source>Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1896"/>
<source>&amp;Table</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1898"/>
<source>Extras</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1898"/>
<source>E&amp;xtras</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1900"/>
<source>Windows</source>
<translation>視窗</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1900"/>
<source>&amp;Windows</source>
<translation>視窗 (&amp;W)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1902"/>
<source>Help</source>
<translation>說明</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1902"/>
<source>&amp;Help</source>
<translation>說明 (&amp;H)</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="2255"/>
<source>Plugin Menu Items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="2257"/>
<source>Others</source>
<translation>其他</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="2259"/>
<source>Unicode Characters</source>
<translation>萬國碼字元</translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1684"/>
<source>Move/Resize Value Indicator</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/actionmanager.cpp" line="1420"/>
<source>New &amp;from Template...</source>
<translation>從範本新建 (&amp;F)...</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
<message>
<location filename="../../../scribus/ui/adjustcmsdialog.cpp" line="16"/>
<source>CMS Settings</source>
<translation>CMS 設定</translation>
</message>
</context>
<context>
<name>AlignDistribute</name>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="142"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="149"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="156"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="163"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="170"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="177"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="184"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="191"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="198"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="205"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="275"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="282"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="289"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="296"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="303"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="313"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="320"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="330"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="337"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="347"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="354"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="361"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="371"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="378"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="385"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="392"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="566"/>
<location filename="../../../scribus/ui/aligndistribute.ui" line="573"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="25"/>
<source>Align</source>
<translation>對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="14"/>
<source>DockWidget</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="86"/>
<source>&amp;Align Sides By:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="439"/>
<source>&amp;Distance:</source>
<translation>間距 (&amp;D):</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="503"/>
<source>Reverse Distribution</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="545"/>
<source>Swap</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="249"/>
<source>Distribute</source>
<translation>分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="67"/>
<source>&amp;Relative To:</source>
<translation>對應於 (&amp;R):</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.ui" line="54"/>
<source>&amp;Selected Guide:</source>
<translation>已選參考線 (&amp;S):</translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="106"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="94"/>
<source>Align</source>
<translation>對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="93"/>
<source>Align and Distribute</source>
<translation>對齊和分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="108"/>
<source>&amp;Align Sides By:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="121"/>
<source>Align bottoms</source>
<translation>底部對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="133"/>
<source>Align bottoms of items to top of anchor</source>
<translation>將項目的底部對齊錨點的頂部</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="172"/>
<source>When distributing by a set distance, reverse the direction of the distribution of items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="176"/>
<source>Swap items to the left</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="177"/>
<source>Swap items to the right</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Align bottoms of objects to top of anchor</source>
<translation type="obsolete">物件底部和錨點頂部對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="129"/>
<source>Align left sides</source>
<translation>左邊對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="119"/>
<source>Align left sides of items to right side of anchor</source>
<translation>將項目的左邊對齊錨點的右邊</translation>
</message>
<message>
<source>Align left sides of objects to right side of anchor</source>
<translation type="obsolete">物件的左邊和錨點的右邊對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="123"/>
<source>Align right sides</source>
<translation>右邊對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="117"/>
<source>Align right sides of items to left side of anchor</source>
<translation>將項目的右邊對齊錨點的左邊</translation>
</message>
<message>
<source>Align right sides of objects to left side of anchor</source>
<translation type="obsolete">物件的右邊和錨點的左邊對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="135"/>
<source>Align tops</source>
<translation>頂部對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="125"/>
<source>Align tops of items to bottom of anchor</source>
<translation>將項目的頂部對齊錨點的底部</translation>
</message>
<message>
<source>Align tops of objects to bottom of anchor</source>
<translation type="obsolete">物件頂部和錨點底部對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="131"/>
<source>Center on horizontal axis</source>
<translation>以水平軸居中</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="127"/>
<source>Center on vertical axis</source>
<translation>以垂直軸居中</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="169"/>
<source>&amp;Distance:</source>
<translation>間距 (&amp;D):</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="95"/>
<source>Distribute</source>
<translation>分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="111"/>
<source>Move</source>
<translation type="unfinished">移動</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="112"/>
<source>Resize</source>
<translation type="unfinished">縮放</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="113"/>
<source>&lt;qt&gt;When aligning one side of an item do one of the following:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height)&lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="147"/>
<source>Distribute bottoms equidistantly</source>
<translation>底部等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="149"/>
<source>Distribute centers equidistantly horizontally</source>
<translation>中間水平等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="157"/>
<source>Distribute centers equidistantly vertically</source>
<translation>中間垂直等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="155"/>
<source>Distribute left sides equidistantly</source>
<translation>左邊等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="145"/>
<source>Distribute right sides equidistantly</source>
<translation>右邊等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="170"/>
<source>Distribute the items with the distance specified</source>
<translation>按指定的間距分佈物件</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="159"/>
<source>Distribute tops equidistantly</source>
<translation>頂部等距分佈</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="99"/>
<source>First Selected</source>
<translation>先選擇</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="103"/>
<source>Guide</source>
<translation>參考線</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="100"/>
<source>Last Selected</source>
<translation>後選擇</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="161"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>讓項目和頁面邊緣的水平間距相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="165"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="140"/>
<source>Make horizontal gaps between items equal</source>
<translation>讓項目水平間距相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="142"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>讓項目水平間距相等於指定值</translation>
</message>
<message>
<source>Make horizontal gaps between objects equal</source>
<translation type="obsolete">讓物件水平間距相等</translation>
</message>
<message>
<source>Make horizontal gaps between objects equal to the value specified</source>
<translation type="obsolete">讓物件水平間距和指定值相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="163"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>讓項目和頁面頂部及底部的垂直間距相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="167"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="151"/>
<source>Make vertical gaps between items equal</source>
<translation>讓項目垂直間距相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>讓項目垂直間距相等於指定值</translation>
</message>
<message>
<source>Make vertical gaps between objects equal</source>
<translation type="obsolete">讓物件垂直間距相等</translation>
</message>
<message>
<source>Make vertical gaps between objects equal to the value specified</source>
<translation type="obsolete">讓物件垂直間距和指定值相等</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="102"/>
<source>Margins</source>
<translation>邊距</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="174"/>
<source>None Selected</source>
<translation>沒有選定</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="101"/>
<source>Page</source>
<translation>頁</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="96"/>
<source>&amp;Relative to:</source>
<translation>對應於 (&amp;R):</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="137"/>
<source>&amp;Selected Guide:</source>
<translation>已選參考線 (&amp;S):</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="104"/>
<source>Selection</source>
<translation>選擇</translation>
</message>
<message>
<source>Some objects are locked.</source>
<translation type="obsolete">某些物件被鎖定</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="115"/>
<source>The location of the selected guide to align to</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Unlock All</source>
<translation type="obsolete">全部解除鎖定 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="485"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<location filename="../../../scribus/ui/aligndistribute.cpp" line="477"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<location filename="../../../scribus/ui/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>文字置中對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>強制文字兩端對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>文字兩端對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>文字靠左對齊</translation>
</message>
<message>
<location filename="../../../scribus/ui/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>文字靠右對齊</translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<source> pt</source>
<translation type="obsolete"> pt</translation>
</message>
<message>
<source>Action</source>
<translation type="obsolete">動作</translation>
</message>
<message>
<source>and less or equal to:</source>
<translation type="obsolete">而且小於或等於:</translation>
</message>
<message>
<source>Appearance</source>
<translation type="obsolete">外觀</translation>
</message>
<message>
<source>average</source>
<translation type="obsolete">平均</translation>
</message>
<message>
<source>Beveled</source>
<translation type="obsolete">斜面</translation>
</message>
<message>
<source>Border</source>
<translation type="obsolete">邊</translation>
</message>
<message>
<source>Button</source>
<translation type="obsolete">按鈕</translation>
</message>
<message>
<source>Calculate</source>
<translation type="obsolete">計算</translation>
</message>
<message>
<source>Cancel</source>
<translation type="obsolete">取消</translation>
</message>
<message>
<source>Change...</source>
<translation type="obsolete">更改...</translation>
</message>
<message>
<source>Characters</source>
<translation type="obsolete">字元</translation>
</message>
<message>
<source>Check</source>
<translation type="obsolete">勾選</translation>
</message>
<message>
<source>Check Box</source>
<translation type="obsolete">勾選框</translation>
</message>
<message>
<source>Check Style:</source>
<translation type="obsolete">勾選樣式:</translation>
</message>
<message>
<source>Circle</source>
<translation type="obsolete">圓形</translation>
</message>
<message>
<source>Color:</source>
<translation type="obsolete">顔色:</translation>
</message>
<message>
<source>Combo Box</source>
<translation type="obsolete">多選框</translation>
</message>
<message>
<source>Cross</source>
<translation type="obsolete">十字</translation>
</message>
<message>
<source>Custom</source>
<translation type="obsolete">自定義</translation>
</message>
<message>
<source>Custom calculation script:</source>
<translation type="obsolete">自定計算 Script:</translation>
</message>
<message>
<source>Custom Scripts</source>
<translation type="obsolete">自定 Script</translation>
</message>
<message>
<source>Custom validate script:</source>
<translation type="obsolete">自定驗證 Script:</translation>
</message>
<message>
<source>Dashed</source>
<translation type="obsolete">點</translation>
</message>
<message>
<source>Date</source>
<translation type="obsolete">日期</translation>
</message>
<message>
<source>Date Format</source>
<translation type="obsolete">日期格式</translation>
</message>
<message>
<source>Decimals:</source>
<translation type="obsolete">小數位:</translation>
</message>
<message>
<source>Default is Checked</source>
<translation type="obsolete">預設已勾選</translation>
</message>
<message>
<source>Destination</source>
<translation type="obsolete">目的地</translation>
</message>
<message>
<source>Diamond</source>
<translation type="obsolete">寶石</translation>
</message>
<message>
<source>Do Not Export Value</source>
<translation type="obsolete">不要輸出值</translation>
</message>
<message>
<source>Do Not Scroll</source>
<translation type="obsolete">不要捲動</translation>
</message>
<message>
<source>Do Not Spell Check</source>
<translation type="obsolete">不要拼寫檢查</translation>
</message>
<message>
<source>Don&apos;t Export Value</source>
<translation type="obsolete">不要輸出值</translation>
</message>
<message>
<source>Edit...</source>
<translation type="obsolete">編輯...</translation>
</message>
<message>
<source>Editable</source>
<translation type="obsolete">可編輯</translation>
</message>
<message>
<source>Enter a comma separated list of fields here</source>
<translation type="obsolete">在此輸入以逗號隔開的域列表</translation>
</message>
<message>
<source>Event:</source>
<translation type="obsolete">事件:</translation>
</message>
<message>
<source>Example:</source>
<translation type="obsolete">範例:</translation>
</message>
<message>
<source>Export absolute Filename</source>
<translation type="obsolete">輸出絕對檔案名</translation>
</message>
<message>
<source>Field is formatted as:</source>
<translation type="obsolete">域格式化爲:</translation>
</message>
<message>
<source>Field Properties</source>
<translation type="obsolete">域屬性</translation>
</message>
<message>
<source>Flag is ignored for PDF 1.3</source>
<translation type="obsolete">選項被PDF 1.3所忽略</translation>
</message>
<message>
<source>Font for use with PDF 1.3:</source>
<translation type="obsolete">用於 PDF 1.3 的字體:</translation>
</message>
<message>
<source>Format</source>
<translation type="obsolete">格式</translation>
</message>
<message>
<source>Format:</source>
<translation type="obsolete">格式:</translation>
</message>
<message>
<source>Formatting</source>
<translation type="obsolete">格式</translation>
</message>
<message>
<source>Go To</source>
<translation type="obsolete">轉到</translation>
</message>
<message>
<source>Hidden</source>
<translation type="obsolete">隱藏</translation>
</message>
<message>
<source>Highlight</source>
<translation type="obsolete">高亮</translation>
</message>
<message>
<source>Icon Placement...</source>
<translation type="obsolete">圖示位置...</translation>
</message>
<message>
<source>Icons</source>
<translation type="obsolete">圖示</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation type="obsolete">圖片 (*.tif *.png *.jpg *.xpm);;%1;;全部檔案 (*)</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation type="obsolete">圖片 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;全部檔案 (*)</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*)</source>
<translation type="obsolete">圖片 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全部檔案 (*)</translation>
</message>
<message>
<source>Import Data</source>
<translation type="obsolete">匯入資料</translation>
</message>
<message>
<source>Import Data from:</source>
<translation type="obsolete">匯入資料:</translation>
</message>
<message>
<source>Inset</source>
<translation type="obsolete">凹入</translation>
</message>
<message>
<source>Invert</source>
<translation type="obsolete">反轉</translation>
</message>
<message>
<source>JavaScript</source>
<translation type="obsolete">JavaScript</translation>
</message>
<message>
<source>Keystroke:</source>
<translation type="obsolete">按鍵:</translation>
</message>
<message>
<source>Limit of</source>
<translation type="obsolete">限制於</translation>
</message>
<message>
<source>List Box</source>
<translation type="obsolete">列舉框</translation>
</message>
<message>
<source>maximum</source>
<translation type="obsolete">最大值</translation>
</message>
<message>
<source>minimum</source>
<translation type="obsolete">最小值</translation>
</message>
<message>
<source>Mouse Down</source>
<translation type="obsolete">滑鼠下移</translation>
</message>
<message>
<source>Mouse Enter</source>
<translation type="obsolete">滑鼠進入</translation>
</message>
<message>
<source>Mouse Exit</source>
<translation type="obsolete">滑鼠退出</translation>
</message>
<message>
<source>Mouse Up</source>
<translation type="obsolete">滑鼠上移</translation>
</message>
<message>
<source>Multi-Line</source>
<translation type="obsolete">多行</translation>
</message>
<message>
<source>Name:</source>
<translation type="obsolete">名稱:</translation>
</message>
<message>
<source>No Print</source>
<translation type="obsolete">不可列印</translation>
</message>
<message>
<source>No View</source>
<translation type="obsolete">不可檢視</translation>
</message>
<message>
<source>None</source>
<translation type="obsolete">無</translation>
</message>
<message>
<source>None</source>
<comment>highlight</comment>
<translation type="obsolete">無</translation>
</message>
<message>
<source>None</source>
<comment>action</comment>
<translation type="obsolete">無</translation>
</message>
<message>
<source>Normal</source>
<translation type="obsolete">正常</translation>
</message>
<message>
<source>Number</source>
<translation type="obsolete">數位</translation>
</message>
<message>
<source>Number Format</source>
<translation type="obsolete">數位格式</translation>
</message>
<message>
<source>of the following fields:</source>
<translation type="obsolete">下面域:</translation>
</message>
<message>
<source>OK</source>
<translation type="obsolete">確定</translation>
</message>
<message>
<source>On Blur</source>
<translation type="obsolete">模糊</translation>
</message>
<message>
<source>On Focus</source>
<translation type="obsolete">聚焦</translation>
</message>
<message>
<source>Open</source>
<translation type="obsolete">打開</translation>
</message>
<message>
<source>Options</source>
<translation type="obsolete">選項</translation>
</message>
<message>
<source>Other</source>
<translation type="obsolete">其他</translation>
</message>
<message>
<source>Outlined</source>
<translation type="obsolete">概要</translation>
</message>
<message>
<source>Page:</source>
<translation type="obsolete">頁:</translation>
</message>
<message>
<source>Password</source>
<translation type="obsolete">密碼</translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation type="obsolete">PDF 檔案 (*.pdf);;全部檔案 (*)</translation>
</message>
<message>
<source>Percent Format</source>
<translation type="obsolete">百分數格式</translation>
</message>
<message>
<source>Percentage</source>
<translation type="obsolete">百分數</translation>
</message>
<message>
<source>Pick...</source>
<translation type="obsolete">選擇...</translation>
</message>
<message>
<source>Plain</source>
<translation type="obsolete">純</translation>
</message>
<message>
<source>Prepend Currency Symbol</source>
<translation type="obsolete">預設貨幣符號</translation>
</message>
<message>
<source>Pressed</source>
<translation type="obsolete">按下</translation>
</message>
<message>
<source>product</source>
<translation type="obsolete">相乘</translation>
</message>
<message>
<source>Properties</source>
<translation type="obsolete">屬性</translation>
</message>
<message>
<source>Push</source>
<translation type="obsolete">推</translation>
</message>
<message>
<source>Read Only</source>
<translation type="obsolete">唯讀</translation>
</message>
<message>
<source>Remove</source>
<translation type="obsolete">移除</translation>
</message>
<message>
<source>Required</source>
<translation type="obsolete">必需</translation>
</message>
<message>
<source>Reset Form</source>
<translation type="obsolete">清空表單</translation>
</message>
<message>
<source>Roll Over</source>
<translation type="obsolete">滑鼠經過</translation>
</message>
<message>
<source>Script:</source>
<translation type="obsolete">Script:</translation>
</message>
<message>
<source>Selection Change</source>
<translation type="obsolete">選擇更改</translation>
</message>
<message>
<source>Solid</source>
<translation type="obsolete">實</translation>
</message>
<message>
<source>Square</source>
<translation type="obsolete">方形</translation>
</message>
<message>
<source>Star</source>
<translation type="obsolete">星星</translation>
</message>
<message>
<source>Style:</source>
<translation type="obsolete">樣式:</translation>
</message>
<message>
<source>Submit Data as HTML</source>
<translation type="obsolete">以 HTML 來傳送資料</translation>
</message>
<message>
<source>Submit Form</source>
<translation type="obsolete">提交表單</translation>
</message>
<message>
<source>Submit to URL:</source>
<translation type="obsolete">傳送到 URL:</translation>
</message>
<message>
<source>sum</source>
<translation type="obsolete">求和</translation>
</message>
<message>
<source>Text</source>
<translation type="obsolete">文本</translation>
</message>
<message>
<source>Text Field</source>
<translation type="obsolete">文本域</translation>
</message>
<message>
<source>Text for Button Down</source>
<translation type="obsolete">按鈕下陷文本</translation>
</message>
<message>
<source>Text for Roll Over</source>
<translation type="obsolete">滑鼠經過文本</translation>
</message>
<message>
<source>Thin</source>
<translation type="obsolete">瘦</translation>
</message>
<message>
<source>Time</source>
<translation type="obsolete">時間</translation>
</message>
<message>
<source>Time Format</source>
<translation type="obsolete">時間格式</translation>
</message>
<message>
<source>To File:</source>
<translation type="obsolete">到檔案:</translation>
</message>
<message>
<source>Tooltip:</source>
<translation type="obsolete">工具提示:</translation>
</message>
<message>
<source>Tool-Tip:</source>
<translation type="obsolete">工具提示:</translation>
</message>
<message>
<source>Type:</source>
<translation type="obsolete">類型:</translation>
</message>
<message>
<source>Underline</source>
<translation type="obsolete">底線</translation>
</message>
<message>
<source>Use Currency Symbol</source>
<translation type="obsolete">使用貨幣符號</translation>
</message>
<message>
<source>Use Icons</source>
<translation type="obsolete">使用圖示</translation>
</message>
<message>
<source>Validate</source>
<translation type="obsolete">驗證</translation>
</message>
<message>
<source>Value is not calculated</source>
<translation type="obsolete">沒有計算值</translation>
</message>
<message>
<source>Value is not validated</source>
<translation type="obsolete">爲驗校值</translation>
</message>
<message>
<source>Value is the</source>
<translation type="obsolete">值是</translation>
</message>
<message>
<source>Value must be greater than or equal to:</source>
<translation type="obsolete">值必須大於或等於:</translation>
</message>
<message>
<source>Visibility:</source>
<translation type="obsolete">可見度:</translation>
</message>
<message>
<source>Visible</source>
<translation type="obsolete">可見</translation>
</message>
<message>
<source>Wide</source>
<translation type="obsolete">寬</translation>
</message>
<message>
<source>Width:</source>
<translation type="obsolete">寬度:</translation>
</message>
<message>
<source>X-Pos:</source>
<translation type="obsolete">X-座標:</translation>
</message>
<message>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation type="obsolete">你最起碼需要用於普通的圖示來使用按鈕的圖示</translation>
</message>
<message>
<source>Y-Pos:</source>
<translation type="obsolete">Y-座標:</translation>
</message>
<message>
<source>Submit format:</source>
<translation type="obsolete">提交格式:</translation>
</message>
<message>
<source>FDF</source>
<translation type="obsolete">FDF</translation>
</message>
<message>
<source>HTML</source>
<translation type="obsolete">HTML</translation>
</message>
<message>
<source>XFDF</source>
<translation type="obsolete">XFDF</translation>
</message>
<message>
<source>PDF</source>
<translation type="obsolete">PDF</translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="196"/>
<location filename="../../../scribus/ui/annota.cpp" line="206"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="440"/>
<source>%1;;All Files (*)</source>
<translation>%1;;全部檔案 (*)</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="47"/>
<source>Annotation Properties</source>
<translation>注釋屬性</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="154"/>
<source>C&amp;hange...</source>
<translation>更改 (&amp;H)...</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="143"/>
<source>Destination</source>
<translation>目的地</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="156"/>
<source>Export absolute Filename</source>
<translation>輸出絕對檔案名</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="79"/>
<source>External Link</source>
<translation>外部鏈結</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>外部網頁鏈結</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="78"/>
<source>Link</source>
<translation>鏈結</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="440"/>
<source>Open</source>
<translation>打開</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="174"/>
<source>&amp;Page:</source>
<translation>頁面 (&amp;P):</translation>
</message>
<message>
<source>PDF-Documents (*.pdf);;All Files (*)</source>
<translation type="obsolete">PDF 檔案 (*.pdf);;全部檔案 (*)</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="77"/>
<source>Text</source>
<translation>文字</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="82"/>
<source>&amp;Type:</source>
<translation>類型 (&amp;T):</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="117"/>
<source>Options</source>
<translation type="unfinished">選項</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="122"/>
<source>Icon:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="124"/>
<source>Note</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="125"/>
<source>Comment</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="126"/>
<source>Key</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="127"/>
<source>Help</source>
<translation type="unfinished">說明</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="128"/>
<source>NewParagraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="129"/>
<source>Paragraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="130"/>
<source>Insert</source>
<translation type="unfinished">插入</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="131"/>
<source>Cross</source>
<translation type="unfinished">十字</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="132"/>
<source>Circle</source>
<translation type="unfinished">圓形</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="137"/>
<source>Annotation is Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="199"/>
<source>&amp;X-Pos</source>
<translation>X-座標 (&amp;X)</translation>
</message>
<message>
<location filename="../../../scribus/ui/annota.cpp" line="208"/>
<source>&amp;Y-Pos:</source>
<translation>Y-座標 (&amp;Y):</translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<source>&amp;All pages</source>
<translation type="obsolete">全部頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="279"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="287"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="277"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="275"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="285"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="273"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="281"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="269"/>
<source>Apply Master Page</source>
<translation>套用主頁</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="282"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>在以下的範圍內套用所選的主頁到偶數頁, 奇數頁或者全部頁面</translation>
</message>
<message>
<source>Apply the selected template to even, odd or all pages within the following range</source>
<translation type="obsolete">在以下的範圍內套用所選的模板到偶數頁, 奇數頁或者全部頁面</translation>
</message>
<message>
<source>Apply To</source>
<translation type="obsolete">套用到</translation>
</message>
<message>
<source>Current &amp;page</source>
<translation type="obsolete">目前頁面 (&amp;P)</translation>
</message>
<message>
<source>&amp;Even pages</source>
<translation type="obsolete">偶數頁面 (&amp;E)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="270"/>
<source>&amp;Master Page:</source>
<translation>主頁 (&amp;M):</translation>
</message>
<message>
<source>Normal</source>
<translation type="obsolete">普通</translation>
</message>
<message>
<source>O&amp;dd pages</source>
<translation type="obsolete">奇數頁面 (&amp;D)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation>可能的連字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="283"/>
<source>to</source>
<translation>到</translation>
</message>
<message>
<source>&amp;Within range</source>
<translation type="obsolete">在範圍內 (&amp;W)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="271"/>
<source>Apply to</source>
<translation>套用到</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="272"/>
<source>Current &amp;Page</source>
<translation>目前頁面 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="274"/>
<source>&amp;Even Pages</source>
<translation>偶數頁面 (&amp;E)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="276"/>
<source>O&amp;dd Pages</source>
<translation>奇數頁面 (&amp;D)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="278"/>
<source>&amp;All Pages</source>
<translation>全部頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/ui/applytemplatedialog.cpp" line="280"/>
<source>&amp;Within Range</source>
<translation>在範圍內 (&amp;W)</translation>
</message>
</context>
<context>
<name>ArcVectorBase</name>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="23"/>
<source>Edit Arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="31"/>
<source>Start Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="51"/>
<source>End Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="71"/>
<source>Height:</source>
<translation type="unfinished">高度:</translation>
</message>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="88"/>
<source>Width:</source>
<translation type="unfinished">寬度:</translation>
</message>
<message>
<location filename="../../../scribus/ui/arcvectorbase.ui" line="122"/>
<source>End Edit</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ArcWidgetBase</name>
<message>
<location filename="../../../scribus/ui/arcwidgetbase.ui" line="26"/>
<source>Form</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcwidgetbase.ui" line="36"/>
<source>Start Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcwidgetbase.ui" line="56"/>
<source>End Angle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/arcwidgetbase.ui" line="117"/>
<source>Sample Polygon</source>
<translation type="unfinished">多邊形樣本</translation>
</message>
</context>
<context>
<name>ArrowChooser</name>
<message>
<source>None</source>
<translation type="obsolete">無</translation>
</message>
</context>
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="80"/>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="obsolete">透過 aspell 增加拼字檢查支援。可選擇的語言基於所安裝的字典。拼字檢查可以即時, 或是在選擇文字時完成。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="38"/>
<source>Spell Checker</source>
<translation>拼字檢查器</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="74"/>
<source>Spell-checking support</source>
<translation>拼字檢查支援</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="76"/>
<source>Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="104"/>
<source>Aspell Plugin Error</source>
<translation>拼字檢查插件錯誤</translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<source>Active dictionary: </source>
<translation type="obsolete">啟用的字典: </translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="279"/>
<source>&amp;Add Word</source>
<translation>增加單字 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="307"/>
<source>&amp;Change</source>
<translation>更改 (&amp;C)</translation>
</message>
<message>
<source>C&amp;hange All</source>
<translation type="obsolete">全部更改 (&amp;H)</translation>
</message>
<message>
<source>&amp;Exit</source>
<translation type="obsolete">退出 (&amp;E)</translation>
</message>
<message>
<source>Mis-spelling:</source>
<translation type="obsolete">拼字錯誤:</translation>
</message>
<message>
<source>Personal
Dictionary</source>
<translation type="obsolete">個人的
字典</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="119"/>
<source>Replacement:</source>
<translation>取代:</translation>
</message>
<message>
<source>&amp;Skip</source>
<translation type="obsolete">跳過 (&amp;S)</translation>
</message>
<message>
<source>S&amp;kip All</source>
<translation type="obsolete">全部跳過 (&amp;K)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="14"/>
<source>Spell Check</source>
<translation>拼字檢查</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="46"/>
<source>Not in Dictionary:</source>
<translation>不在字典中:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="71"/>
<source>Word that was not found in the active dictionary</source>
<translation>單字在目前啟用的字典中找不到</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="126"/>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation>要取代目前單字的文字在字典中找不到</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="182"/>
<source>Active Dictionary: </source>
<translation>啟用字典:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="195"/>
<source>The currently active dictionary. Scribus uses Aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="226"/>
<source>Ignore the current text not found in the active dictionary</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="229"/>
<source>&amp;Ignore</source>
<translation>忽略 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="248"/>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="251"/>
<source>I&amp;gnore All</source>
<translation>全部忽略 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="276"/>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation>增加目前的單字到個人的拼字字典中以便未來使用</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="304"/>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="332"/>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="335"/>
<source>Change A&amp;ll</source>
<translation>全部更改 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="373"/>
<source>Close</source>
<translation>關閉</translation>
</message>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<source> aspell dictionary.</source>
<translation type="obsolete"> aspell 字典。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="393"/>
<source> by adding it to the session list.</source>
<translation> 增加它到會話清單。</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation type="obsolete">aspell插件 (AspellPluginImpl::AspellPluginImpl): aspell 拼字器設定錯誤。</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation type="obsolete">aspell插件 (AspellPluginImpl::AspellPluginImpl): 產生 aspell 拼字器錯誤。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="414"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): 無法增加單字到個人的清單。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="391"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
<source>default </source>
<translation>預設 </translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
<source>Loaded </source>
<translation>已載入 </translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="106"/>
<source>Spell Checker Plugin Failed to Initialise.
Configuration invalid</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="113"/>
<source>Spell Checker Plugin Failed to Initialise.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="115"/>
<source>No Aspell dictionaries could be found.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spell-Checker</source>
<translation type="obsolete">拼字檢查器</translation>
</message>
<message>
<source>Spell-checking completed.</source>
<translation type="obsolete">拼字檢查已完成。</translation>
</message>
<message>
<source>Spell-checking done.</source>
<translation type="obsolete">拼字檢查已完成。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="267"/>
<source>Spelling check complete</source>
<translation>拼字檢查已完成</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="268"/>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="460"/>
<source>Spell Checker</source>
<translation>拼字檢查器</translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="81"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
<source> Aspell dictionary.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="461"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="36"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1281"/>
<source>Arrows</source>
<translation>箭頭</translation>
</message>
<message>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="21"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1280"/>
<source>Default Shapes</source>
<translation>預設形狀</translation>
</message>
<message>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="44"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1282"/>
<source>Flow Chart</source>
<translation>流程圖</translation>
</message>
<message>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="53"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1283"/>
<source>Jigsaw</source>
<translation>線鋸</translation>
</message>
<message>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="66"/>
<location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1284"/>
<source>Specials</source>
<translation>特別符號</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<source>&amp;Barcode Generator...</source>
<translation type="obsolete">條碼產生器 (&amp;B)...</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<source>&amp;Barcode...</source>
<translation>條碼 (&amp;B)...</translation>
</message>
<message>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">Scribus 的純 Postscript 條碼輸出前端</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation>Scribus 的純 Postscript 條碼輸出前端</translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation>11 或 12 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation>12 或 13 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation>2 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation>5 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation>7 或 8 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation>8 位</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="102"/>
<source>Variable number of characters, digits and any symbols.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="109"/>
<source>Barcode</source>
<translation type="unfinished">條碼</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="377"/>
<source>Barcode incomplete</source>
<translation>條碼未完成</translation>
</message>
<message>
<source>Error creating preview</source>
<translation type="obsolete">產生預覽錯誤</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="343"/>
<source>Error opening file: %1</source>
<translation>打開檔案時發生錯誤: %1</translation>
</message>
<message>
<source>Select Barcode Type</source>
<translation type="obsolete">選擇條碼形式</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="167"/>
<source>Select Type</source>
<translation>選擇形式</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="63"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="74"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="82"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="85"/>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="176"/>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="63"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="76"/>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="50"/>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="240"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="37"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="173"/>
<source>&amp;Background</source>
<translation>背景 (&amp;B)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="170"/>
<source>Background color - under the code lines</source>
<translation>背景顔色 - 在條碼下面</translation>
</message>
<message>
<source>Barcode</source>
<translation type="obsolete">條碼</translation>
</message>
<message>
<source>Barcode Creator</source>
<translation type="obsolete">條碼產生器</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="115"/>
<source>Co&amp;de:</source>
<translation>條碼 (&amp;D):</translation>
</message>
<message>
<source>C&amp;ode:</source>
<translation type="obsolete">編碼 (&amp;O):</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="202"/>
<source>Color of the lines in barcode</source>
<translation>條碼中線條的顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="234"/>
<source>Color of the text and numbers</source>
<translation>文字和數字的顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="151"/>
<source>Colors</source>
<translation>顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="57"/>
<source>Draw arrows to be sure of space next the code</source>
<translation>畫箭頭確保編碼旁的空位 </translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="25"/>
<source>Format</source>
<translation>格式</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="44"/>
<source>Generate and include a checksum in barcode</source>
<translation>產生並包含檢查碼在條碼中</translation>
</message>
<message>
<source>&amp;Guard whitespace</source>
<translation type="obsolete">注意留白 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="269"/>
<source>Hints and help is shown here</source>
<translation>這裡顯示提示和求助</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="70"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation>如果勾選, 在條碼中也會有數位</translation>
</message>
<message>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">包含檢查碼 (&amp;N)</translation>
</message>
<message>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">插入檢查碼數字 (&amp;U)</translation>
</message>
<message>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">在條碼中包含文字 (&amp;I) </translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="31"/>
<source>Include the checksum digit in the barcode text</source>
<translation>在條碼文字中包含檢查碼數字</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="16"/>
<source>Insert Barcode</source>
<translation>插入條碼</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
<source>&amp;Lines</source>
<translation>線條 (&amp;L)</translation>
</message>
<message>
<source>Preview of the result. 72dpi sample.</source>
<translation type="obsolete">預覽效果。72dpi 範例。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="98"/>
<source>Reset the barcode samples</source>
<translation>重置條碼範例</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="128"/>
<source>Select one of the available barcode type here</source>
<translation>選擇一個可用的條碼類型</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
<source>&amp;Text</source>
<translation>文字 (&amp;T)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="108"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>代表編碼的數位。參見下面的求助資訊</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="135"/>
<source>&amp;Type:</source>
<translation>類型 (&amp;T):</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="34"/>
<source>Incl&amp;ude Checksum Digit</source>
<translation>包含檢查碼數字 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="47"/>
<source>I&amp;nclude Checksum</source>
<translation>包含檢查碼 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="60"/>
<source>&amp;Guard Whitespace</source>
<translation>注意留白 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="73"/>
<source>&amp;Include Text in Barcode</source>
<translation></translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<source>Choose a Directory</source>
<translation type="obsolete">選擇一個目錄</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="761"/>
<source>Choose a Scrapbook Directory</source>
<translation>選擇剪貼簿目錄</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="806"/>
<source>Choose a scrapbook file to import</source>
<translation>選擇要匯入的剪貼簿檔案</translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="obsolete">關閉 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1044"/>
<source>Close</source>
<translation>關閉</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1752"/>
<source>Go up one Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1753"/>
<source>Import a scrapbook file from Scribus &lt;=1.3.2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1754"/>
<source>Close the selected scrapbook</source>
<translation>關閉所選擇的剪貼簿</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="608"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="609"/>
<source>Copied Items</source>
<translation>已複製的項目</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="582"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1757"/>
<source>Hide Images</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="585"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1758"/>
<source>Hide Vector files</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1005"/>
<source>Copy To:</source>
<translation>複製到:</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1751"/>
<source>Create a new scrapbook page</source>
<translation>建立一個新剪貼簿頁面</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1755"/>
<source>Configure the scrapbook</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1000"/>
<source>Delete</source>
<translation>刪除</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="579"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1756"/>
<source>Hide Directories</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="589"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1759"/>
<source>Open Directories in a new tab</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1047"/>
<source>Delete Contents</source>
<translation>刪除內容</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1209"/>
<source>Do you really want to delete all entries?</source>
<translation>你真的想要刪除所有輸入的嗎?</translation>
</message>
<message>
<source>&amp;File</source>
<translation type="obsolete">檔案 (&amp;F)</translation>
</message>
<message>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation type="obsolete">從 Scribus 版本 &lt;=1.3.2 載入剪貼簿檔案</translation>
</message>
<message>
<source>&amp;Import Scrapbook File...</source>
<translation type="obsolete">匯入剪貼簿檔案 (&amp;I)...</translation>
</message>
<message>
<source>&amp;Large</source>
<translation type="obsolete">大 (&amp;L)</translation>
</message>
<message>
<source>Load an existing scrapbook</source>
<translation type="obsolete">讀取現有的剪貼簿</translation>
</message>
<message>
<source>&amp;Load...</source>
<translation type="obsolete">載入 (&amp;L)...</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="605"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="606"/>
<source>Main</source>
<translation>主要</translation>
</message>
<message>
<source>&amp;Medium</source>
<translation type="obsolete">中 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1006"/>
<source>Move To:</source>
<translation>移動到:</translation>
</message>
<message>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation type="obsolete">名稱 &quot;%1&quot;非唯一
請另選。</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1065"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1254"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1383"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1511"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1674"/>
<source>&amp;Name:</source>
<translation>名稱 (&amp;N):</translation>
</message>
<message>
<source>&amp;New</source>
<translation type="obsolete">新建 (&amp;N)</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1065"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1383"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1511"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1674"/>
<source>New Entry</source>
<translation>新物件</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1254"/>
<source>New Name</source>
<translation>新名稱</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1499"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1507"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1592"/>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1671"/>
<source>Object</source>
<translation>物件</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="994"/>
<source>Paste to Page</source>
<translation>貼到頁面</translation>
</message>
<message>
<source>&amp;Preview</source>
<translation type="obsolete">預覽 (&amp;P)</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="998"/>
<source>Rename</source>
<translation>重命名</translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="obsolete">儲存 (&amp;S)</translation>
</message>
<message>
<source>Save as...</source>
<translation type="obsolete">另存新檔...</translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation type="obsolete">另存新檔 (&amp;A)...</translation>
</message>
<message>
<source>Save the selected scrapbook</source>
<translation type="obsolete">儲存選擇的剪貼簿</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1750"/>
<source>Scrapbook</source>
<translation>剪貼簿</translation>
</message>
<message>
<location filename="../../../scribus/ui/scrapbookpalette.cpp" line="808"/>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>剪貼簿 (*.scs *.SCS)</translation>
</message>
<message>
<source>Scrapbook (*.scs)</source>
<translation type="obsolete">剪貼簿 (*.scs)</translation>
</message>
<message>
<source>Scrapbooks (*.scs);;All Files (*)</source>
<translation type="obsolete">剪貼簿 (*.scs);;所有檔案 (*)</translation>
</message>
<message>
<source>&amp;Small</source>
<translation type="obsolete">小 (&amp;S)</translation>
</message>
</context>
<context>
<name>BookMView</name>
<message>
<source>Bookmarks</source>
<translation type="obsolete">書籤</translation>
</message>
<message>
<source>Cancel</source>
<translation type="obsolete">取消</translation>
</message>
<message>
<source>Insert Bookmark</source>
<translation type="obsolete">插入書籤</translation>
</message>
<message>
<source>Move Bookmark</source>
<translation type="obsolete">移動書籤</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<location filename="../../../scribus/ui/bookmarkpalette.cpp" line="48"/>
<source>Bookmarks</source>
<translation>書籤</translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
<source>Always</source>
<translation>總是</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="121"/>
<source>Cancel</source>
<translation>取消</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>標題在圖示上面</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>圖示在標題上面</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>標題在圖示左邊</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>僅標題</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>標題覆蓋圖示</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>標題在圖示右邊</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="90"/>
<source>Icon</source>
<translation>圖示</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
<source>Icon only</source>
<translation>僅圖示</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>圖示位置</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>版面:</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>從不</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="67"/>
<source>Non Proportional</source>
<translation>不按比例</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="117"/>
<source>OK</source>
<translation>確定</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="66"/>
<source>Proportional</source>
<translation>按比例</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="124"/>
<source>Reset</source>
<translation>重置</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>如何縮放:</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>縮放:</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
<source>When Icon is too big</source>
<translation>當圖示太大時</translation>
</message>
<message>
<location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
<source>When Icon is too small</source>
<translation>當圖示太小時</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="26"/>
<source>Monitor profiles can only be changed when no documents are currently opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
<source>Absolute Colorimetric</source>
<translation>絕對比色</translation>
</message>
<message>
<source>&amp;Activate Color Management</source>
<translation type="obsolete">啟動色彩管理 (&amp;A)</translation>
</message>
<message>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="obsolete">黑點補償是增加照片對比的方法。
如果你的檔案中有照片, 建議啟用此選項。</translation>
</message>
<message>
<source>&amp;CMYK Images:</source>
<translation type="obsolete">CMYK 圖片 (&amp;C):</translation>
</message>
<message>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">CMYK 圖片 (&amp;C):</translation>
</message>
<message>
<source>&amp;CMYK Solid Colors:</source>
<translation type="obsolete">&amp;CMYK 單色:</translation>
</message>
<message>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">你從印表機製造商取得的顏色配置檔案。
這個檔案必須是你印表機特定的, 而且不是一般的配置檔案 (也就是 sRGB)。</translation>
</message>
<message>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">你產生或從製造商取得的顏色配置檔案。
這個檔案必須是你螢幕特定的, 而且不是一般的配置檔案 (也就是 sRGB)。</translation>
</message>
<message>
<source>Convert all colors to printer space</source>
<translation type="obsolete">轉換所有顏色到印表機的顏色空間</translation>
</message>
<message>
<source>Default color profile for imported CMYK images</source>
<translation type="obsolete">匯入的 CMYK 圖片的預設顔色配置檔案</translation>
</message>
<message>
<source>Default color profile for imported RGB images</source>
<translation type="obsolete">匯入的 RGB 圖片的預設顔色配置檔案</translation>
</message>
<message>
<source>Default color profile for solid colors on the page</source>
<translation type="obsolete">預設頁面單色的顔色配置文件</translation>
</message>
<message>
<source>Default rendering intent for your monitor. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for your monitor. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Default rendering intent for your printer. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for your printer. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<source>Images:</source>
<translation type="obsolete">圖片:</translation>
</message>
<message>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="obsolete">標出超出範圍的顔色 (&amp;G)</translation>
</message>
<message>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="obsolete">在螢幕上顯示可能不能正確列印的顔色的方法。
這需要非常精確的配置文件而且僅用於警示之用。</translation>
</message>
<message>
<source>&amp;Monitor:</source>
<translation type="obsolete">監視器 (&amp;M):</translation>
</message>
<message>
<source>M&amp;onitor:</source>
<translation type="obsolete">監視器 (&amp;O):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
<source>Perceptual</source>
<translation>感官</translation>
</message>
<message>
<source>Pr&amp;inter:</source>
<translation type="obsolete">印表機 (&amp;I):</translation>
</message>
<message>
<source>P&amp;rinter:</source>
<translation type="obsolete">印表機 (&amp;R):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
<source>Relative Colorimetric</source>
<translation>相對比色</translation>
</message>
<message>
<source>Rendering Intents</source>
<translation type="obsolete">渲染意圖</translation>
</message>
<message>
<source>&amp;RGB Images:</source>
<translation type="obsolete">RGB 圖片 (&amp;R):</translation>
</message>
<message>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">RGB 圖片 (&amp;R):</translation>
</message>
<message>
<source>&amp;RGB Solid Colors:</source>
<translation type="obsolete">&amp;RGB 單色:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
<source>Saturation</source>
<translation>飽和度</translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">在監視器上模擬印表機 (&amp;U)</translation>
</message>
<message>
<source>Sol&amp;id Colors:</source>
<translation type="obsolete">單色 (&amp;I):</translation>
</message>
<message>
<source>&amp;Solid Colors:</source>
<translation type="obsolete">單色 (&amp;S):</translation>
</message>
<message>
<source>System Profiles</source>
<translation type="obsolete">系統配置文件</translation>
</message>
<message>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="obsolete">使用黑點補償 (&amp;B)</translation>
</message>
</context>
<context>
<name>CMSPrefsBase</name>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="20"/>
<source>Form</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="32"/>
<source>&amp;Activate Color Management</source>
<translation>啟動色彩管理 (&amp;A)</translation>
</message>
<message>
<source>System Profiles</source>
<translation type="obsolete">系統配置檔</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="54"/>
<source>&amp;RGB Images:</source>
<translation>RGB 圖片 (&amp;R):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="70"/>
<source>Default color profile for imported RGB images</source>
<translation>匯入的 RGB 圖片的預設顔色配置檔案</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="77"/>
<source>&amp;CMYK Images:</source>
<translation>CMYK 圖片 (&amp;C):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="93"/>
<source>Default color profile for imported CMYK images</source>
<translation>匯入的 CMYK 圖片的預設顔色配置檔案</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="100"/>
<source>&amp;RGB Solid Colors:</source>
<translation>&amp;RGB 單色:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="116"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation>預設頁面的單色 RGB 顏色的顔色配置檔案</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="123"/>
<source>&amp;CMYK Solid Colors:</source>
<translation>&amp;CMYK 單色:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="139"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>預設頁面的單色 CMYK 顏色的顔色配置檔案</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="245"/>
<source>Document Options</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="278"/>
<source>Simulate printer on Screen</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="313"/>
<source>Monitor Profile</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="325"/>
<source>&amp;Monitor:</source>
<translation>監視器 (&amp;M):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="341"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="unfinished">你產生或從製造商取得的顏色配置檔案。
這個檔案必須是你螢幕特定的, 而且不是一般的配置檔案 (也就是 sRGB)。</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="146"/>
<source>P&amp;rinter:</source>
<translation>印表機 (&amp;R):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="42"/>
<source>Document Profiles</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="162"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>你從印表機製造商取得的顏色配置檔案。
這個檔案必須是你印表機特定的, 而且不是一般的配置檔案 (也就是 sRGB)。</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="176"/>
<source>Document Rendering Intents</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="188"/>
<source>Images:</source>
<translation>圖片:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="204"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="212"/>
<source>Sol&amp;id Colors:</source>
<translation>單色 (&amp;I):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="228"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="274"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="unfinished">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">在監視器上模擬印表機 (&amp;U)</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="285"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="289"/>
<source>Convert all colors to printer space</source>
<translation>轉換所有顏色到印表機的顏色空間</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="296"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>在螢幕上顯示可能不能正確列印的顔色的方法。
這需要非常精確的配置文件而且僅用於警示之用。</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="300"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>標出超出範圍的顔色 (&amp;G)</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="263"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>黑點補償是增加照片對比的方法。
如果你的檔案中有照片, 建議啟用此選項。</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmsprefsbase.ui" line="267"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation>使用黑點補償 (&amp;B)</translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="257"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="284"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="311"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="338"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="654"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="655"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="656"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="698"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="235"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="657"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="359"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="114"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="632"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="842"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="849"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="109"/>
<source>Color &amp;Model</source>
<translation>顔色類型 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="191"/>
<source>Scribus Swatches</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="195"/>
<source>User Swatches</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="413"/>
<source>Dynamic Color Bars</source>
<translation>動態顔色條</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="90"/>
<source>Edit Color</source>
<translation>編輯顔色</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="697"/>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-顔色表</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="727"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="728"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is Registration Color</source>
<translation type="obsolete">是記錄顔色</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="123"/>
<source>Is Spot Color</source>
<translation>是專色</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="316"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="262"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="658"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<source>Name of the color is not unique</source>
<translation type="obsolete">顔色名稱不唯一</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="99"/>
<source>&amp;Name:</source>
<translation>名稱 (&amp;N):</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="133"/>
<source>New</source>
<translation>新</translation>
</message>
<message>
<source>None</source>
<translation type="obsolete">無</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="150"/>
<source>Old</source>
<translation>舊</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="696"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="115"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="384"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="854"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="411"/>
<source>Static Color Bars</source>
<translation>靜態顔色條</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="954"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="116"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="707"/>
<source>Web Safe RGB</source>
<translation>網頁安全 RGB</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="289"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="659"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="945"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>你不能生成一個叫 &quot;%1&quot;的顔色。
這個是給透明色預留的名字</translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="938"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/cmykfw.cpp" line="188"/>
<location filename="../../../scribus/ui/cmykfw.cpp" line="199"/>
<source>HSV Color Map</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="352"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="382"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="412"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
<source>Alt+M</source>
<translation>Alt+M</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
<source>Alt+R</source>
<translation>Alt+R</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
<source>Angle:</source>
<translation>角度:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="625"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="342"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
<source>&amp;Cancel</source>
<translation>取消 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="77"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="652"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="331"/>
<source>Color %1 appended.</source>
<translation>顔色 %1 已追加。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="326"/>
<source>Color %1 exists already!</source>
<translation>顏色 %1 已經存在!</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="338"/>
<source>Color Merging</source>
<translation>混合顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
<source>Color Scheme Method</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
<source>Color Wheel</source>
<translation>顔色轉盤</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
<source>Colors of your chosen color scheme.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="unfinished">Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
<source>Document</source>
<translation>檔案</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="326"/>
<source>Error: </source>
<translation>錯誤: </translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="598"/>
<source>G:</source>
<translation>G:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
<source>H:</source>
<translation>H:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="87"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="498"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
<source>HSV:</source>
<translation>HSV:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="432"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
<source>Leave colors untouched</source>
<translation type="unfinished">Leave colours untouched</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
<source>&amp;Merge</source>
<translation>混合 (&amp;M)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
<source>Merge created colors into the document colors</source>
<translation type="unfinished">Merge created colours into the document colours</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="320"/>
<source>Merging colors</source>
<translation>混合顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="335"/>
<source>Now opening the color manager.</source>
<translation>現在正在打開顏色管理器。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
<source>Preview:</source>
<translation>預覽:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
<source>&amp;Replace</source>
<translation>取代 (&amp;R)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
<source>Replace created colors in the document colors</source>
<translation type="unfinished">Replace created colours in the document colours</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
<source>Result Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="82"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="462"/>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="784"/>
<source>S:</source>
<translation>S:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
<source>Sample color scheme.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="unfinished">Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="unfinished">Simulate common vision defects here. Select type of the defect.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="487"/>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>找不到要求的顏色。你可能選擇了黑色, 灰色或是白色。沒有處理這個顏色的方式。</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
<source>V:</source>
<translation>V:</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
<source>Vision Defect Type:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="402"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
</context>
<context>
<name>Canvas</name>
<message>
<location filename="../../../scribus/canvas.cpp" line="2435"/>
<location filename="../../../scribus/canvas.cpp" line="2463"/>
<source>X: %1
Y: %2</source>
<translation>X: %1
Y: %2</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2448"/>
<source>X: %1</source>
<translation>X: %1</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2455"/>
<source>Y: %1</source>
<translation>Y: %1</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2471"/>
<source>Length: %1
Angle: %2</source>
<translation>長度: %1
角度: %2</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2473"/>
<source>Width: %1
Height: %2</source>
<translation>寬: %1
高: %2</translation>
</message>
<message>
<location filename="../../../scribus/canvas.cpp" line="2485"/>
<location filename="../../../scribus/canvas.cpp" line="2492"/>
<source>Angle: %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CanvasMode_EyeDropper</name>
<message>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="174"/>
<source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
<translation>所選的顔色在檔案的顔色組合中不存在。請爲這個新顔色輸入一個名字。</translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="177"/>
<source>Color Not Found</source>
<translation>找不到顏色</translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_eyedropper.cpp" line="181"/>
<source>The name you have selected already exists. Please enter a different name for this new color.</source>
<translation>你爲新顔色選擇的名稱已經存在。請輸入一個新名稱。</translation>
</message>
</context>
<context>
<name>CanvasMode_FrameLinks</name>
<message>
<location filename="../../../scribus/canvasmode_framelinks.cpp" line="194"/>
<source>Linking Text Frames</source>
<translation type="unfinished">串聯文字框</translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_framelinks.cpp" line="198"/>
<source>Before</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_framelinks.cpp" line="199"/>
<source>After</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CanvasMode_Normal</name>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="389"/>
<source>Go to Page %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="391"/>
<source>Go to URL %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="393"/>
<source>Go to Page %1 in File %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="434"/>
<source>Overflow Characters: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1536"/>
<source>Page %1 does not exist!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1542"/>
<source>Link Target is Web URL.
URL: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1543"/>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1548"/>
<source>Information</source>
<translation type="unfinished">資訊</translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1547"/>
<source>Link Target is external File.
File: %1
Page: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1814"/>
<source>All Supported Formats</source>
<translation>所有支援的格式</translation>
</message>
<message>
<location filename="../../../scribus/canvasmode_normal.cpp" line="1842"/>
<source>Open</source>
<translation>打開</translation>
</message>
</context>
<context>
<name>CellStyleComboBox</name>
<message>
<location filename="../../../scribus/ui/spalette.cpp" line="145"/>
<location filename="../../../scribus/ui/spalette.cpp" line="158"/>
<location filename="../../../scribus/ui/spalette.cpp" line="169"/>
<source>No Style</source>
<translation type="unfinished">沒有樣式</translation>
</message>
</context>
<context>
<name>CgmPlug</name>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="191"/>
<source>Importing: %1</source>
<translation type="unfinished">正在匯入: %1</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="194"/>
<source>Analyzing File:</source>
<translation type="unfinished">分析檔案:</translation>
</message>
<message>
<source>Group%1</source>
<translation type="obsolete">群組%1</translation>
</message>
<message>
<location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="441"/>
<source>Generating Items</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ChTable</name>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">如果你長按滑鼠右鍵, 你能看到一個縮圖。插入鍵插入一個符號到所選擇的下面, 刪除鍵刪除最後插入的符號。</translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<source>Arabic</source>
<translation type="obsolete">阿拉伯字元</translation>
</message>
<message>
<source>Arabic Extended A</source>
<translation type="obsolete">阿拉伯字元擴展 A</translation>
</message>
<message>
<source>Arabic Extended B</source>
<translation type="obsolete">阿拉伯字元擴展 B</translation>
</message>
<message>
<source>Arrows</source>
<translation type="obsolete">箭頭</translation>
</message>
<message>
<source>Basic Latin</source>
<translation type="obsolete">基本拉丁</translation>
</message>
<message>
<source>Block Elements</source>
<translation type="obsolete">區塊元素</translation>
</message>
<message>
<source>Box Drawing</source>
<translation type="obsolete">方盒繪圖</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="303"/>
<source>Cannot write file %1</source>
<translation>無法寫入檔案 %1</translation>
</message>
<message>
<source>Character Class:</source>
<translation type="obsolete">字元類:</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.ui" line="13"/>
<source>Character Palette</source>
<translation>字元調色板</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="226"/>
<source>Choose a filename to open</source>
<translation>選擇要開啟的檔案名</translation>
</message>
<message>
<source>Choose a filename to save under</source>
<translation type="obsolete">選擇要儲存的檔案名</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation type="obsolete">清除 (&amp;L)</translation>
</message>
<message>
<source>&amp;Close</source>
<translation type="obsolete">關閉 (&amp;C)</translation>
</message>
<message>
<source>Close this dialog and return to text editing</source>
<translation type="obsolete">關閉此對話框並返回編輯文字</translation>
</message>
<message>
<source>Close this dialog and return to text editing.</source>
<translation type="obsolete">關閉對話框並返回到文字編輯。</translation>
</message>
<message>
<source>Currency Symbols</source>
<translation type="obsolete">貨幣符號</translation>
</message>
<message>
<source>Cyrillic</source>
<translation type="obsolete">斯拉夫字元</translation>
</message>
<message>
<source>Cyrillic Supplement</source>
<translation type="obsolete">斯拉夫字元附錄</translation>
</message>
<message>
<source>Delete the current selection(s).</source>
<translation type="obsolete">刪除目前選擇的。</translation>
</message>
<message>
<source>Dingbats</source>
<translation type="obsolete">裝飾符</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="311"/>
<source>Empty the Palette?</source>
<translation>清空調色版?</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="260"/>
<location filename="../../../scribus/ui/charselect.cpp" line="302"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="261"/>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation>載入檔案 %1 時發生錯誤, 檔案可能已損毀。</translation>
</message>
<message>
<source>Font:</source>
<translation type="obsolete">字體:</translation>
</message>
<message>
<source>Full Character Set</source>
<translation type="obsolete">完全字元集</translation>
</message>
<message>
<source>General Punctuation</source>
<translation type="obsolete">一般標點符號</translation>
</message>
<message>
<source>Geometric Shapes</source>
<translation type="obsolete">幾何圖形</translation>
</message>
<message>
<source>Greek</source>
<translation type="obsolete">希臘字元</translation>
</message>
<message>
<source>Greek Extended</source>
<translation type="obsolete">擴展希臘字元</translation>
</message>
<message>
<source>Hebrew</source>
<translation type="obsolete">希伯來字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.ui" line="24"/>
<source>Hide/Show Enhanced Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Insert</source>
<translation type="obsolete">插入 (&amp;I)</translation>
</message>
<message>
<source>Insert the characters at the cursor in the text</source>
<translation type="obsolete">在文字的游標處插入字元</translation>
</message>
<message>
<source>Latin Extended-A</source>
<translation type="obsolete">拉丁擴展-A</translation>
</message>
<message>
<source>Latin Extended-B</source>
<translation type="obsolete">拉丁擴展-B</translation>
</message>
<message>
<source>Latin-1 Supplement</source>
<translation type="obsolete">拉丁-1 附錄</translation>
</message>
<message>
<source>Letterlike Symbols</source>
<translation type="obsolete">類似字母符號</translation>
</message>
<message>
<source>Ligatures</source>
<translation type="obsolete">連字</translation>
</message>
<message>
<source>Mathematical Operators</source>
<translation type="obsolete">數學運算符</translation>
</message>
<message>
<source>Miscellaneous Symbols</source>
<translation type="obsolete">各種符號</translation>
</message>
<message>
<source>Number Forms</source>
<translation type="obsolete">數位形式</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="28"/>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation>Scribus Char Palette (*.ucp);;All Files (*)</translation>
</message>
<message>
<source>Select Character:</source>
<translation type="obsolete">選擇字元:</translation>
</message>
<message>
<source>Small Form Variants</source>
<translation type="obsolete">小形狀變體</translation>
</message>
<message>
<source>Specials</source>
<translation type="obsolete">特別符號</translation>
</message>
<message>
<source>Super- and Subscripts</source>
<translation type="obsolete">上標和下標</translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="obsolete">如果你長按滑鼠右鍵, 你能看到一個縮圖。插入鍵插入一個符號到所選擇的下面, 刪除鍵刪除最後插入的符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="312"/>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselect.cpp" line="275"/>
<source>Save Quick Character Palette</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CharSelectEnhanced</name>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="208"/>
<source>Full Character Set</source>
<translation>完整字元集</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="213"/>
<source>Basic Latin</source>
<translation>基本拉丁</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="219"/>
<source>Latin-1 Supplement</source>
<translation type="unfinished">拉丁-1 附錄</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="225"/>
<source>Latin Extended-A</source>
<translation>拉丁擴展-A</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="231"/>
<source>Latin Extended-B</source>
<translation>拉丁擴展-B</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="237"/>
<source>General Punctuation</source>
<translation>一般標點符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="243"/>
<source>Super- and Subscripts</source>
<translation type="unfinished">上標和下標</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="249"/>
<source>Currency Symbols</source>
<translation>貨幣符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="255"/>
<source>Letterlike Symbols</source>
<translation type="unfinished">類似字母符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="261"/>
<source>Number Forms</source>
<translation type="unfinished">數位形式</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="267"/>
<source>Arrows</source>
<translation>箭頭</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="273"/>
<source>Mathematical Operators</source>
<translation type="unfinished">數學運算符</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="279"/>
<source>Box Drawing</source>
<translation type="unfinished">方盒繪圖</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="285"/>
<source>Block Elements</source>
<translation type="unfinished">區塊元素</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="291"/>
<source>Geometric Shapes</source>
<translation type="unfinished">幾何圖形</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="297"/>
<source>Miscellaneous Symbols</source>
<translation type="unfinished">各種符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="303"/>
<source>Dingbats</source>
<translation>裝飾符</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="309"/>
<source>Small Form Variants</source>
<translation type="unfinished">小形狀變體</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="315"/>
<source>Ligatures</source>
<translation>連字</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="321"/>
<source>Specials</source>
<translation>特別符號</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="327"/>
<source>Greek</source>
<translation>希臘字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="333"/>
<source>Greek Extended</source>
<translation>希臘字元擴展</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="339"/>
<source>Cyrillic</source>
<translation type="unfinished">斯拉夫字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="345"/>
<source>Cyrillic Supplement</source>
<translation type="unfinished">斯拉夫字元附錄</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="351"/>
<source>Arabic</source>
<translation>阿拉伯字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="357"/>
<source>Arabic Extended A</source>
<translation type="unfinished">阿拉伯字元擴展 A</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="363"/>
<source>Arabic Extended B</source>
<translation type="unfinished">阿拉伯字元擴展 B</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.cpp" line="369"/>
<source>Hebrew</source>
<translation>希伯來字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="13"/>
<source>Enhanced Character Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="19"/>
<source>&amp;Font:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="45"/>
<source>C&amp;haracter Class:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="77"/>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="96"/>
<source>Insert &amp;Code:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="131"/>
<source>Glyphs to Insert</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="171"/>
<source>Insert the characters at the cursor in the text</source>
<translation type="unfinished">在文字的游標處插入字元</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="174"/>
<source>&amp;Insert</source>
<translation>插入 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="184"/>
<source>Delete the current selection(s).</source>
<translation>刪除目前選擇的。</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="187"/>
<source>C&amp;lear</source>
<translation>清除 (&amp;L)</translation>
</message>
<message>
<location filename="../../../scribus/ui/charselectenhanced.ui" line="106"/>
<source>Type in a four digit Unicode value directly here</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CharStyleComboBox</name>
<message>
<location filename="../../../scribus/ui/spalette.cpp" line="90"/>
<location filename="../../../scribus/ui/spalette.cpp" line="103"/>
<location filename="../../../scribus/ui/spalette.cpp" line="114"/>
<source>No Style</source>
<translation>沒有樣式</translation>
</message>
</context>
<context>
<name>CharTableView</name>
<message>
<location filename="../../../scribus/chartableview.cpp" line="22"/>
<source>Delete</source>
<translation>刪除</translation>
</message>
</context>
<context>
<name>CheckDocument</name>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="681"/>
<source>Annotation uses a non TrueType font</source>
<translation>註釋使用的不是 True Type 字體</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="379"/>
<source>Blendmode used</source>
<translation>使用混合模式</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="664"/>
<source>Check again</source>
<translation>再次檢查</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="662"/>
<source>Current Profile:</source>
<translation>目前的配置文件:</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="330"/>
<source>Document</source>
<translation>檔案</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="674"/>
<source>Empty Image Frame</source>
<translation>清空圖片框</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="622"/>
<source>Free Objects</source>
<translation>自由物件</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="670"/>
<source>Glyphs missing</source>
<translation>符號遺失</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="632"/>
<location filename="../../../scribus/ui/checkDocument.cpp" line="663"/>
<source>&amp;Ignore Errors</source>
<translation>忽略錯誤 (&amp;I)</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="667"/>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation>忽略發現的錯誤並繼續匯出或是列印。確定你瞭解忽略的錯誤之後再繼續。</translation>
</message>
<message>
<source>Image has a DPI-Value less than %1 DPI</source>
<translation type="obsolete">圖片的 DPI 值低於 %1 DPI</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="680"/>
<source>Image is GIF</source>
<translation>圖片是 GIF 檔</translation>
</message>
<message>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">圖片解析度高於 %1 DPI, 現在是 %2 x %3 DPI</translation>
</message>
<message>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation type="obsolete">圖片解析度低於 %1 DPI, 現在是 %2 x %3 DPI</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="657"/>
<source>Items</source>
<translation>物件</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="392"/>
<source>Layer &quot;%1&quot;</source>
<translation>圖層 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="673"/>
<source>Missing Image</source>
<translation>圖片遺失</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="332"/>
<source>No Problems found</source>
<translation>沒有發現問題</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="677"/>
<source>Object has transparency</source>
<translation>物件有透明度</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="678"/>
<source>Object is a PDF Annotation or Field</source>
<translation>物件是一個 PDF 注釋或域</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="679"/>
<source>Object is a placed PDF</source>
<translation>物件是個嵌入的 PDF</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="672"/>
<source>Object is not on a Page</source>
<translation>物件不在頁面上</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="333"/>
<source>OK</source>
<translation>確定</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="558"/>
<source>Page </source>
<translation>頁面 </translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="666"/>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="655"/>
<source>Preflight Verifier</source>
<translation>印前檢驗器</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="657"/>
<source>Problems</source>
<translation>問題</translation>
</message>
<message>
<source>Problems found</source>
<translation type="obsolete">發現問題</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="668"/>
<source>Rerun the document scan to check corrections you may have made</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="671"/>
<source>Text overflow</source>
<translation>文字溢出</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="374"/>
<source>Transparency used</source>
<translation>已使用透明度</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="348"/>
<source>After Marks update document was changed</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="355"/>
<source>Layers</source>
<translation>圖層</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="384"/>
<source>Print/Visible Mismatch</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="397"/>
<location filename="../../../scribus/ui/checkDocument.cpp" line="485"/>
<source>Issue(s): %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="408"/>
<source>Master Pages</source>
<translation>主頁</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="658"/>
<source>Layer</source>
<translation>圖層</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="675"/>
<source>Image resolution below %1 DPI,
currently %2 x %3 DPI</source>
<translation>圖片解析度低於 %1 DPI,
目前是 %2 x %3 DPI</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="676"/>
<source>Image resolution above %1 DPI,
currently %2 x %3 DPI</source>
<translation>圖片解析度高於 %1 DPI,
目前是 %2 x %3 DPI</translation>
</message>
<message>
<location filename="../../../scribus/ui/checkDocument.cpp" line="682"/>
<source>Image dimension is smaller than its frame</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ChooseStyles</name>
<message>
<source>Available Styles</source>
<translation type="obsolete">可用樣式</translation>
</message>
<message>
<source>Choose Styles</source>
<translation type="obsolete">選擇樣式</translation>
</message>
</context>
<context>
<name>ClockWidget</name>
<message>
<location filename="../../../scribus/ui/clockwidget.cpp" line="77"/>
<source>A</source>
<translation type="unfinished">A</translation>
</message>
</context>
<context>
<name>CollectForOutput</name>
<message>
<location filename="../../../scribus/collect4output.cpp" line="114"/>
<source>Cannot collect all files for output for file:
%1</source>
<translation>不能收集所有文件來輸出文件:
%1</translation>
</message>
<message>
<location filename="../../../scribus/collect4output.cpp" line="129"/>
<source>Cannot collect the file:
%1</source>
<translation>不能收集文件:
%1</translation>
</message>
<message>
<location filename="../../../scribus/collect4output.cpp" line="71"/>
<source>Choose a Directory</source>
<translation>選擇一個目錄</translation>
</message>
<message>
<location filename="../../../scribus/collect4output.cpp" line="95"/>
<source>Cannot create directory:
%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/collect4output.cpp" line="110"/>
<source>Collecting...</source>
<translation>收集中...</translation>
</message>
<message>
<source>Warning</source>
<translation type="obsolete">警告</translation>
</message>
</context>
<context>
<name>CollectForOutput_UI</name>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="39"/>
<source>Collecting Items:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="42"/>
<source>Collecting Patterns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="48"/>
<source>Collecting Fonts:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="54"/>
<source>Collecting Profiles:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="87"/>
<source>Collecting...</source>
<translation type="unfinished">收集中...</translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="91"/>
<source>Cannot collect all files for output for file:
%1</source>
<translation type="unfinished">不能收集所有文件來輸出文件:
%1</translation>
</message>
<message>
<location filename="../../../scribus/ui/collectforoutput_ui.cpp" line="114"/>
<source>Cannot collect the file:
%1</source>
<translation type="unfinished">不能收集文件:
%1</translation>
</message>
</context>
<context>
<name>ColorListBox</name>
<message>
<location filename="../../../scribus/ui/colorlistbox.cpp" line="250"/>
<source>Sort by Name</source>
<translation type="unfinished">按名稱排序</translation>
</message>
<message>
<location filename="../../../scribus/ui/colorlistbox.cpp" line="251"/>
<source>Sort by Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../../scribus/ui/colorlistbox.cpp" line="252"/>
<source>Sort by Type</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ColorManager</name>
<message>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation type="obsolete">所有支援的格式 (%1);;檔案 (%2);;其他檔案 (%3);;全部檔案 (*)</translation>
</message>
<message>
<source>Choose a color set to load</source>
<translation type="obsolete">選擇要載入的顔色組合</translation>
</message>
<message>
<source>Choose a Name</source>
<translation type="obsolete">選擇一個名稱</translation>
</message>
<message>
<source>Color Sets</source>
<translation type="obsolete">顔色組合</translation>
</message>
<message>
<source>Colors</source>
<translation type="obsolete">顔色</translation>
</message>
<message>
<source>Copy of %1</source>
<translation type="obsolete">複製 %1</translation>
</message>
<message>
<source>Create a new color within the current set</source>
<translation type="obsolete">在目前的顏色組合中建立一個新的顏色</translation>
</message>
<message>
<source>Current Color Set:</source>
<translation type="obsolete">目前顔色組合:</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation type="obsolete">刪除 (&amp;D)</translation>
</message>
<message>
<source>Delete the currently selected color</source>
<translation type="obsolete">刪除目前選取的顏色</translation>
</message>
<message>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation type="obsolete">檔案 (*.sla *.scd);;全部文件 (*)</translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation type="obsolete">檔案 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*)</translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation type="obsolete">複製 (&amp;U)</translation>
</message>
<message>
<source>&amp;Edit</source>
<translation type="obsolete">編輯 (&amp;E)</translation>
</message>
<message>
<source>Edit the currently selected color</source>
<translation type="obsolete">編輯目前選取的顏色</translation>
</message>
<message>
<source>&amp;Import</source>
<translation type="obsolete">匯入 (&amp;I)</translation>
</message>
<message>
<source>Import</source>
<translation type="obsolete">匯入</translation>
</message>
<message>
<source>Import colors to the current set from an existing document</source>
<translation type="obsolete">從現有的檔案中匯入顔色組合到目前的組合</translation>
</message>
<message>
<source>Information</source>
<translation type="obsolete">資訊</translation>
</message>
<message>
<source>Make a copy of the currently selected color</source>
<translation type="obsolete">複製目前選取的顏色</translation>
</message>
<message>
<source>Make the current colorset the default color set</source>
<translation type="obsolete">將目前的顏色組合設定為預設的顏色組合</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation type="obsolete">名稱 (&amp;N):</translation>
</message>
<message>
<source>&amp;New</source>
<translation type="obsolete">新建 (&amp;N)</translation>
</message>
<message>
<source>New Color</source>
<translation type="obsolete">新顔色</translation>
</message>
<message>
<source>Open</source>
<translation type="obsolete">打開</translation>
</message>
<message>
<source>&amp;Remove Unused</source>
<translation type="obsolete">清除未用的 (&amp;R)</translation>
</message>
<message>
<source>Remove unused colors from current document&apos;s color set</source>
<translation type="obsolete">從目前檔案顔色組合清除未用顔色</translation>
</message>
<message>
<source>&amp;Save Color Set</source>
<translation type="obsolete">儲存顔色組合 (&amp;S)</translation>
</message>
<message>
<source>Save the current color set</source>
<translation type="obsolete">儲存目前的顔色組合</translation>
</message>
<message>
<source>Import Colors</source>
<translation type="obsolete">匯入顏色</translation>
</message>
</context>
<context>
<name>ColorWheel</name>
<message>
<source>1st. Analogous</source>
<translation type="obsolete">第一個相似的</translation>
</message>
<message>
<source>1st. Split</source>
<translation type="obsolete">第一個拆分</translation>
</message>
<message>
<source>2nd. Analogous</source>
<translation type="obsolete">第二個相似的</translation>
</message>
<message>
<source>2nd. Split</source>
<translation type="obsolete">第二個拆分</translation>
</message>
<message>
<source>3rd. Split</source>
<translation type="obsolete">第三個拆分</translation>
</message>
<message>
<source>4th. Split</source>
<translation type="obsolete">第四個拆分</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
<source>Analogous</source>
<translation>相似的</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
<source>Base Color</source>
<translation>基本顔色</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="141"/>
<source>Complementary</source>
<translation>補充的</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
<source>Monochromatic</source>
<translation>單色的</translation>
</message>
<message>
<source>Monochromatic Dark</source>
<translation type="obsolete">單色暗</translation>
</message>
<message>
<source>Monochromatic Light</source>
<translation type="obsolete">單色亮</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
<source>Split Complementary</source>
<translation>拆分補充的</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
<source>Tetradic (Double Complementary)</source>
<translation>四分的(雙補充的)</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
<source>Triadic</source>
<translation>三合一的</translation>
</message>
</context>
<context>
<name>ColorWheelDialog</name>
<message>
<source>Angle (0 - 90 degrees):</source>
<translation type="obsolete">角度 (0 - 90 度):</translation>
</message>
<message>
<source>C</source>
<translation type="obsolete">C</translation>
</message>
<message>
<source>Click the wheel to get the base color. It is hue in HSV mode.</source>
<translation type="obsolete">Click the wheel to get the base colour. It is hue in HSV mode.</translation>
</message>
<message>
<source>Color</source>
<translation type="obsolete">顔色</translation>
</message>
<message>
<source>C&amp;olor</source>
<translation type="obsolete">顔色 (&amp;O)</translation>
</message>
<message>
<source>Color %1 appended.</source>
<translation type="obsolete">顔色 %1 被追加。</translation>
</message>
<message>
<source>Color %1 exists already!</source>
<translation type="obsolete">顏色 %1 已經存在!</translation>
</message>
<message>
<source>C&amp;olor Components...</source>
<translation type="obsolete">顏色組成 (&amp;C)...</translation>
</message>
<message>
<source>Color Merging</source>
<translation type="obsolete">Colour Merging</translation>
</message>
<message>
<source>Color Wheel</source>
<translation type="obsolete">顔色轉盤</translation>
</message>
<message>
<source>Colors of your chosen color scheme</source>
<translation type="obsolete">你所選顔色組合的顔色</translation>
</message>
<message>
<source>Cr&amp;eate color...</source>
<translation type="obsolete">Cr&amp;eate colour...</translation>
</message>
<message>
<source>Deuteranopia (Green)</source>
<translation type="obsolete">Deuteranopia (Green)</translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation type="obsolete">Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
</message>
<message>
<source>Error: </source>
<translation type="obsolete">錯誤: </translation>
</message>
<message>
<source>E&amp;xit</source>
<translation type="obsolete">退出 (&amp;X)</translation>
</message>
<message>
<source>Full Color Blindness</source>
<translation type="obsolete">Full Colour Blindness</translation>
</message>
<message>
<source>&amp;Import existing color...</source>
<translation type="obsolete">&amp;Import existing colour...</translation>
</message>
<message>
<source>K</source>
<translation type="obsolete">K</translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation type="obsolete">Leave colours untouched</translation>
</message>
<message>
<source>M</source>
<translation type="obsolete">M</translation>
</message>
<message>
<source>&amp;Merge colors</source>
<translation type="obsolete">混合顔色 (&amp;M)</translation>
</message>
<message>
<source>&amp;Merge Colors</source>
<translation type="obsolete">混合顔色 (&amp;M)</translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation type="obsolete">Merge created colours into the document colours</translation>
</message>
<message>
<source>Merging colors</source>
<translation type="obsolete">Merging colours</translation>
</message>
<message>
<source>Name</source>
<translation type="obsolete">名稱</translation>
</message>
<message>
<source>New Color</source>
<translation type="obsolete">新顔色</translation>
</message>
<message>
<source>Normal Vision</source>
<translation type="obsolete">Normal Vision</translation>
</message>
<message>
<source>Now opening the color manager.</source>
<translation type="obsolete">Now opening the colour manager.</translation>
</message>
<message>
<source>Protanopia (Red)</source>
<translation type="obsolete">Protanopia (Red)</translation>
</message>
<message>
<source>&amp;Replace colors</source>
<translation type="obsolete">取代顏色 (&amp;R)</translation>
</message>
<message>
<source>&amp;Replace Colors</source>
<translation type="obsolete">取代顏色 (&amp;R)</translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation type="obsolete">Replace created colours in the document colours</translation>
</message>
<message>
<source>Sample color scheme</source>
<translation type="obsolete">Sample colour scheme</translation>
</message>
<message>
<source>Select Method:</source>
<translation type="obsolete">選擇方式:</translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation type="obsolete">Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation type="obsolete">Simulate common vision defects here. Select type of the defect.</translation>
</message>
<message>
<source>Tritanopia (Blue)</source>
<translation type="obsolete">Tritanopia (Blue)</translation>
</message>
<message>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation type="obsolete">Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour.</translation>
</message>
<message>
<source>Vision Defect:</source>
<translation type="obsolete">Vision Defect:</translation>
</message>
<message>
<source>Y</source>
<translation type="obsolete">Y</translation>
</message>
</context>
<context>
<name>ColorWheelPlugin</name>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="66"/>
<source>Color selector with color theory included.</source>
<translation>Colour selector with colour theory included.</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
<source>Color setting helper</source>
<translation>顏色設定說明</translation>
</message>
<message>
<location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="48"/>
<source>&amp;Color Wheel...</source>
<translation>顔色轉盤 (&amp;C)...</translation>
</message>
</context>
<context>
<name>ColumnResize</name>
<message>
<location filename="../../../scribus/canvasgesture_columnresize.cpp" line="92"/>
<source>Width</source>
<translation type="unfinished">寬度</translation>
</message>
</context>
<context>
<name>CommonStrings</name>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="337"/>
<source>3-Fold</source>
<translation>3折</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="338"/>
<source>4-Fold</source>
<translation>4折</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="272"/>
<source>&amp;Apply</source>
<translation>套用 (&amp;A)</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="388"/>
<source>April</source>
<translation>四月</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="392"/>
<source>August</source>
<translation>八月</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="275"/>
<source>&amp;Cancel</source>
<translation>取消 (&amp;C)</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="399"/>
<source>CMYK</source>
<comment>Colorspace</comment>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="329"/>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation>自定</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="411"/>
<source>Custom: </source>
<comment>Custom Tab Fill Option</comment>
<translation>自定: </translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="364"/>
<source>Dash Dot Dot Line</source>
<translation>虛點點線</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="363"/>
<source>Dash Dot Line</source>
<translation>虛點線</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="361"/>
<source>Dashed Line</source>
<translation>虛線</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="396"/>
<source>December</source>
<translation>十二月</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="418"/>
<source>Default</source>
<comment>Optical Margin Setting</comment>
<translation>預設 </translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="372"/>
<source>Default Character Style</source>
<translation>預設字元樣式</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="373"/>
<source>Default Line Style</source>
<translation>預設線條樣式</translation>
</message>
<message>
<location filename="../../../scribus/commonstrings.cpp" line="371"/>
<source>Default Paragraph Style</source>
<