Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 13850 → Rev 13851

/trunk/Scribus/translations/po/scribus.it.ts
0,0 → 1,35888
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="it_IT" sourcelanguage="en">
<context>
<name></name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation>deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation>deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="191"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="201"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="213"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation>moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation>moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation>redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation>getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation>setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation>setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="44"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="54"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="64"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="74"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="84"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="94"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="107"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="154"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="168"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="180"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="192"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation>createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation>createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation>setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="315"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="328"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="345"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="358"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="372"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="385"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="399"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="414"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="426"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation>scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="120"/>
<source>isSpotColor(&quot;name&quot;) -&gt; bool
 
Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="135"/>
<source>setSpotColor(&quot;name&quot;, spot)
 
Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="167"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on
properties palette. Note : deprecated, use setImageScale() instead.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="180"/>
<source>setImageScale(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])
 
Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
<source>setTextScalingV(scale, [&quot;name&quot;])
 
Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
<source>setTextScalingH(scale, [&quot;name&quot;])
 
Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="obsolete">getColorNames() -&gt; list
 
Returns a list containing the names of all defined colours in the document.
If no document is open, returns a list of the default document colours.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="obsolete">newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="obsolete">setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="obsolete">setGradientFill(type, &quot;colour1&quot;, shade1, &quot;colour2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Colour descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="obsolete">messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="obsolete">createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="obsolete">deleteMasterPage(pageName)
 
Delete the named master page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="obsolete">zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="obsolete">textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="obsolete">getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Colour components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="obsolete">setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="obsolete">rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="obsolete">gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to front.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="obsolete">moveSelectionToFront()Moves current selection to back.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.fromDoc: string; the filename of the document to import pages frompageList: tuple with page numbers of pages to importcreate: number; 0 to replace existing pages, 1 (default) to insert new pagesimportWhere: number; the page number (of the current document) at which import the pagesimportWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; name of the char style to create
 
&quot;font&quot; [optional] -&gt; name of the font to use
 
fontsize [optional] -&gt; font size to set (double)
 
&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-&gt; inherit
 
-&gt; bold
 
-&gt; italic
 
-&gt; underline
 
-&gt; underlinewords
 
-&gt; strike
 
-&gt; superscript
 
-&gt; subscript
 
-&gt; outline
 
-&gt; shadowed
 
-&gt; allcaps
 
-&gt; smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options
 
baselineoffset [optional] -&gt; offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used
 
outlinewidth [optional] -&gt; width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used
 
scaleh [optional], scalev [optional] -&gt; scale of the chars
 
tracking [optional] -&gt; tracking of the text
 
&quot;language&quot; [optional] -&gt; language code
 
</source>
<translation type="obsolete">createCharStyle(...)Creates a character style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; name of the char style to create&quot;font&quot; [optional] -&gt; name of the font to usefontsize [optional] -&gt; font size to set (double)&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):-&gt; inherit-&gt; bold-&gt; italic-&gt; underline-&gt; underlinewords-&gt; strike-&gt; superscript-&gt; subscript-&gt; outline-&gt; shadowed-&gt; allcaps-&gt; smallcaps&quot;fillcolour&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options&quot;strokecolour&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke optionsbaselineoffset [optional] -&gt; offset of the baselineshadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if usedoutlinewidth [optional] -&gt; width of the outline if usedunderlineoffset [optional], underlinewidth [optional] -&gt; underline options if usedstrikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if usedscaleh [optional], scalev [optional] -&gt; scale of the charstracking [optional] -&gt; tracking of the text&quot;language&quot; [optional] -&gt; language code</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; boolDoes hyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; boolDoes dehyphenation on text frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="obsolete">scrollDocument(x,y)Scroll the document in main GUI window by x and y.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing: 0automatic linespacing: 1baseline grid linespacing: 2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left: 0-&gt; center: 1-&gt; right: 2-&gt; justify: 3-&gt; extend: 4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
<source>Importing: %1</source>
<translation>Importazione: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
<source>Analyzing File:</source>
<translation>Analisi file:</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="265"/>
<source>Group%1</source>
<translation>Gruppo%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2469"/>
<source>Generating Items</source>
<translation>Generazione elementi</translation>
</message>
</context>
<context>
<name>About</name>
<message>
<location filename="../../scribus/about.cpp" line="305"/>
<source>Contributions from:</source>
<translation>Collaborazione di:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="188"/>
<source>&amp;About</source>
<translation>&amp;Informazioni</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="201"/>
<source>A&amp;uthors</source>
<translation>A&amp;utori</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="215"/>
<source>&amp;Translations</source>
<translation>&amp;Traduzioni</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="226"/>
<source>&amp;Online</source>
<translation>&amp;Online</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="265"/>
<source>&amp;Close</source>
<translation>&amp;Chiudi</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="297"/>
<source>Development Team:</source>
<translation>Team di sviluppo:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="307"/>
<source>Official Documentation:</source>
<translation>Documentazione ufficiale:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="311"/>
<source>Other Documentation:</source>
<translation>Altra documentazione:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="345"/>
<source>Homepage</source>
<translation>Sito Web</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="347"/>
<source>Online Reference</source>
<translation>Referenze online</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="351"/>
<source>Bugs and Feature Requests</source>
<translation>Segnalazioni errori e richiesta nuove funzioni</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="355"/>
<source>Mailing List</source>
<translation>Lista di discussione</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="329"/>
<source>Official Translations and Translators:</source>
<translation>Traduzioni ufficiali e traduttori:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="331"/>
<source>Previous Translation Contributors:</source>
<translation>Collaboratori traduzione precedente:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="97"/>
<source>About Scribus %1</source>
<translation>Informazioni su Scribus%1</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="349"/>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="125"/>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="133"/>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="183"/>
<source>Using Ghostscript version %1</source>
<translation>Uso versione %1 Ghostscript</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="185"/>
<source>No Ghostscript version available</source>
<translation>Nessuna versione Ghostscript disponibile</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>Build ID:</source>
<translation>Build ID:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="299"/>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>Mac OS&amp;#174; X Aqua Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="303"/>
<source>Windows&amp;#174; Port:</source>
<translation>Windows&amp;#174; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="317"/>
<source>Tango Project Icons:</source>
<translation>Icone Progetto Tango:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="229"/>
<source>&amp;Updates</source>
<translation>A&amp;ggiornamenti</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="0"/>
<source>Check for &amp;Updates</source>
<translation type="obsolete">Check for &amp;Updates</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="277"/>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Controlla gli aggiornamenti per Scribus. Nessun dato sarà trasferito dal tuo computer.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="301"/>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; Port:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="315"/>
<source>Splash Screen:</source>
<translation>Schermata d&apos;avvio:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="273"/>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>Questo pannello mostra la versione, la data della build e della compilazione nel supporto delle librerie in Scribus. </translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="274"/>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>I simboli C-C-T-F equivalgono ai seguenti supporti: C=littlecms C=CUPS T=TIFF F=Fontconfig. L&apos;ultima lettera indica il motore di rendering C=cairo o Q=Qt</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="275"/>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation> Il supporto per le librerie mancanti è indicato da un asterisco (*). Viene inoltre indicata la versione di Ghostscript rilevata da Scribus.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="276"/>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>La versione di WIndows non utilizza fontconfig né le librerie CUPS.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
<translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="186"/>
<source>Scribus Version</source>
<translation>Versione di Scribus</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="649"/>
<source>Check for Updates</source>
<translation>Controlla aggiornamenti</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="647"/>
<source>Abort Update Check</source>
<translation>Annulla controllo aggiornamenti</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="353"/>
<source>Developer Blog</source>
<translation>Blog degli sviluppatori</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="240"/>
<source>&amp;Licence</source>
<translation>&amp;Licenza</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="249"/>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>Impossibile aprire il file licenza. Si prega di controllare la cartella di installazione o il sito Web di Scribus per informazioni sulla licenza.</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="309"/>
<source>Doc Translators:</source>
<translation>Traduttori documentazione:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="313"/>
<source>Webmasters:</source>
<translation>Webmasters:</translation>
</message>
<message>
<location filename="../../scribus/about.cpp" line="625"/>
<source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
<translation>Impossibile aprire il file %1. Si prega di controllare la cartella di installazione o il sito Web di Scribus per informazioni su %1.</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="68"/>
<source>Filename:</source>
<translation>Nome file:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="69"/>
<source>Version:</source>
<translation>Versione:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="72"/>
<source>Enabled:</source>
<translation>Abilitato:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="73"/>
<source>Release Date:</source>
<translation>Data rilascio:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="80"/>
<source>Description:</source>
<translation>Descrizione:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="81"/>
<source>Author(s):</source>
<translation>Autore/i:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="82"/>
<source>Copyright:</source>
<translation>Copyright:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.cpp" line="83"/>
<source>License:</source>
<translation>Licenza:</translation>
</message>
<message>
<location filename="../../scribus/aboutplugins.ui" line="13"/>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: Informazioni Estensioni</translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<source>&amp;Image Effects</source>
<translation>Effetti &amp;immagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<source>&amp;Tabulators...</source>
<translation>&amp;Tabulatori...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<source>&amp;New</source>
<translation>&amp;Nuovo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
<source>&amp;Open...</source>
<translation>A&amp;pri...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<source>&amp;Close</source>
<translation>&amp;Chiudi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<source>&amp;Save</source>
<translation>&amp;Salva</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<source>Save &amp;As...</source>
<translation>Salva c&amp;ome...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<source>Re&amp;vert to Saved</source>
<translation>Ritorna al documento sal&amp;vato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<source>Collect for O&amp;utput...</source>
<translation>Ra&amp;ggruppa per l&apos;output...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<source>Get Text...</source>
<translation>Carica testo...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<source>Append &amp;Text...</source>
<translation>Accoda &amp;Testo...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1267"/>
<source>Get Image...</source>
<translation>Carica immagne...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<source>Save &amp;Text...</source>
<translation>Salva il &amp;Testo...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<source>Save as P&amp;DF...</source>
<translation>Salva come P&amp;DF...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
<source>Document &amp;Setup...</source>
<translation>Impostazioni do&amp;cumento...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<source>&amp;Print...</source>
<translation>Stam&amp;pa...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1277"/>
<source>&amp;Quit</source>
<translation>A&amp;bbandona</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<source>&amp;Undo</source>
<translation>Ann&amp;ulla</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
<source>&amp;Redo</source>
<translation>&amp;Ripeti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<source>&amp;Item Action Mode</source>
<translation>Modalità cronologia a&amp;zioni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<source>Cu&amp;t</source>
<translation>&amp;Taglia</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1285"/>
<source>&amp;Copy</source>
<translation>&amp;Copia</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1286"/>
<source>&amp;Paste</source>
<translation>Inco&amp;lla</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<source>Select &amp;All</source>
<translation>Seleziona t&amp;utto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1291"/>
<source>&amp;Deselect All</source>
<translation>&amp;Deseleziona tutto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1292"/>
<source>&amp;Search/Replace...</source>
<translation>&amp;Trova/Sostituisci...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1295"/>
<source>C&amp;olors...</source>
<translation>C&amp;olori...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
<source>&amp;Master Pages...</source>
<translation>Pagine &amp;mastro...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>P&amp;references...</source>
<translation>Pr&amp;eferenze...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1307"/>
<source>%1 pt</source>
<translation>%1 pt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1309"/>
<source>&amp;Other...</source>
<translation>A&amp;ltro...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1310"/>
<source>&amp;Left</source>
<translation>Sinist&amp;ra</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1311"/>
<source>&amp;Center</source>
<translation>&amp;Centro</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1312"/>
<source>&amp;Right</source>
<translation>&amp;Destra</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1313"/>
<source>&amp;Block</source>
<translation>&amp;Giustificato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<source>&amp;Forced</source>
<translation>&amp;Forzato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>&amp;%1 %</source>
<translation type="obsolete">&amp;%1 %</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Normal</source>
<translation>&amp;Normale</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<source>&amp;Underline</source>
<translation>Sottolinea &amp;parole</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<source>Underline &amp;Words</source>
<translation>Sottolinea &amp;parole</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
<source>&amp;Strike Through</source>
<translation>&amp;Barrato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<source>&amp;All Caps</source>
<translation>&amp;Tutto maiuscolo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<source>Small &amp;Caps</source>
<translation>Maius&amp;coletto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<source>Su&amp;perscript</source>
<translation>Ap&amp;ice</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<source>Su&amp;bscript</source>
<translation>Pe&amp;dice</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<source>D&amp;uplicate</source>
<translation>Du&amp;plica</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<source>&amp;Multiple Duplicate</source>
<translation>Duplicazione &amp;multipla</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<source>&amp;Delete</source>
<translation>&amp;Elimina</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<source>&amp;Group</source>
<translation>Ragg&amp;ruppa</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<source>&amp;Ungroup</source>
<translation>&amp;Separa</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<source>Is &amp;Locked</source>
<translation>B&amp;loccato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<source>Si&amp;ze is Locked</source>
<translation>&amp;Dimensione bloccata</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<source>Lower to &amp;Bottom</source>
<translation>Metti in fon&amp;do</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<source>Raise to &amp;Top</source>
<translation>Metti in pri&amp;mo piano</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<source>&amp;Lower</source>
<translation>A&amp;bbassa</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<source>&amp;Raise</source>
<translation>Al&amp;za</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<source>Send to S&amp;crapbook</source>
<translation>Aggiungi alla &amp;biblioteca</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<source>&amp;Attributes...</source>
<translation>&amp;Attributi...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<source>I&amp;mage Visible</source>
<translation>I&amp;mmagine visibile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<source>Is PDF &amp;Bookmark</source>
<translation>Segnali&amp;bro PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<source>Is PDF A&amp;nnotation</source>
<translation>A&amp;nnotazione PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<source>Annotation P&amp;roperties</source>
<translation>P&amp;roprietà annotazioni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1369"/>
<source>Field P&amp;roperties</source>
<translation>P&amp;roprietà campo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1370"/>
<source>&amp;Edit Shape...</source>
<translation>M&amp;odifica forma...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<source>&amp;Attach Text to Path</source>
<translation>Un&amp;isci testo a tracciato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<source>&amp;Detach Text from Path</source>
<translation>S&amp;epara testo da tracciato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<source>&amp;Combine Polygons</source>
<translation>&amp;Combina poligoni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<source>Split &amp;Polygons</source>
<translation>Dividi poli&amp;gono</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<source>&amp;Bezier Curve</source>
<translation>Curva di Be&amp;zier</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
<source>&amp;Image Frame</source>
<translation>Cornice i&amp;mmagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<source>&amp;Polygon</source>
<translation>&amp;Poligono</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<source>&amp;Text Frame</source>
<translation>Cornice &amp;testo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<source>&amp;Glyph...</source>
<translation>G&amp;lifi...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<source>Sample Text</source>
<translation>Testo di esempio</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<source>&amp;Insert...</source>
<translation>&amp;Inserisci...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<source>Im&amp;port...</source>
<translation>Im&amp;porta...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<source>&amp;Delete...</source>
<translation>&amp;Elimina...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<source>&amp;Copy...</source>
<translation>&amp;Copia...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<source>&amp;Move...</source>
<translation>&amp;Sposta...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<source>&amp;Apply Master Page...</source>
<translation>&amp;Applica pagina mastro...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
<source>Manage &amp;Guides...</source>
<translation>&amp;Gestione linee guida...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
<source>Show &amp;Margins</source>
<translation>Mostra &amp;margini</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1409"/>
<source>Show &amp;Frames</source>
<translation>Mostra &amp;cornici</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<source>Show &amp;Images</source>
<translation>Mostra &amp;immagini</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1412"/>
<source>Show &amp;Grid</source>
<translation>Mostra &amp;griglia</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1413"/>
<source>Show G&amp;uides</source>
<translation>Mostra g&amp;uide</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<source>Show &amp;Baseline Grid</source>
<translation>Mostra griglia tipogra&amp;fica</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<source>Show &amp;Text Chain</source>
<translation>Most&amp;ra collegamenti cornici</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<source>Sn&amp;ap to Grid</source>
<translation>Aggancia a&amp;lla griglia</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<source>Sna&amp;p to Guides</source>
<translation>Agga&amp;ncia alle guide</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<source>&amp;Properties</source>
<translation>&amp;Proprietà</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<source>&amp;Scrapbook</source>
<translation>&amp;Biblioteca</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<source>&amp;Layers</source>
<translation>&amp;Livelli</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<source>&amp;Bookmarks</source>
<translation>Segnali&amp;bri</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<source>&amp;°</source>
<translation>&amp;°</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1433"/>
<source>Action &amp;History</source>
<translation>Cronologia a&amp;zioni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<source>Preflight &amp;Verifier</source>
<translation>&amp;Verifica preliminare</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<source>&amp;Tools</source>
<translation>&amp;Strumenti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<source>P&amp;DF Tools</source>
<translation>Strumenti P&amp;DF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<source>Select Item</source>
<translation>Seleziona elemento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<source>Rotate Item</source>
<translation>Ruota elemento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<source>Zoom in or out</source>
<translation>Zoom avanti o indietro</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
<source>Zoom in</source>
<translation>Zoom avanti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<source>Zoom out</source>
<translation>Zoom indietro</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1445"/>
<source>Edit Contents of Frame</source>
<translation>Modifica contenuto cornice</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<source>Link Text Frames</source>
<translation>Collega cornici testo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<source>Unlink Text Frames</source>
<translation>Scollega cornici testo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
<source>&amp;Eye Dropper</source>
<translation>S&amp;elettore colore</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<source>Copy Item Properties</source>
<translation>Copia proprietà elemento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;Manage Pictures</source>
<translation type="obsolete">&amp;Manage Pictures</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<source>&amp;Hyphenate Text</source>
<translation>&amp;Testo sillabato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<source>&amp;Generate Table Of Contents</source>
<translation>&amp;Genera tabella di contenuti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1482"/>
<source>&amp;About Scribus</source>
<translation>Informazioni su &amp;Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<source>About &amp;Qt</source>
<translation>Informazioni su &amp;Qt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<source>Toolti&amp;ps</source>
<translation>Su&amp;ggerimenti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1487"/>
<source>Scribus &amp;Manual...</source>
<translation>&amp;Manuale di Scribus...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<source>Smart &amp;Hyphen</source>
<translation>Sillaba&amp;zione manuale</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<source>Non Breaking &amp;Space</source>
<translation>Trattino pro&amp;tetto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
<source>Page &amp;Number</source>
<translation>Nume&amp;ro pagina</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<source>Copyright</source>
<translation>Copyright</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<source>Registered Trademark</source>
<translation>Marchio registrato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<source>Trademark</source>
<translation>Marchio depositato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<source>Bullet</source>
<translation>Punto nero</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<source>Em Dash</source>
<translation>Trattino lungo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<source>En Dash</source>
<translation>Trattino medio</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<source>Figure Dash</source>
<translation>Trattino numerico</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<source>Quotation Dash</source>
<translation>Trattino citazione</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Toggle Palettes</source>
<translation>Mostra tavolozze</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<source>S&amp;hadow</source>
<translation>Ombre&amp;ggiato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<source>&amp;Low Resolution</source>
<translation>&amp;Bassa risoluzione</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1364"/>
<source>&amp;Normal Resolution</source>
<translation>Risolu&amp;zione normale</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1365"/>
<source>&amp;Full Resolution</source>
<translation>Alta riso&amp;luzione</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1293"/>
<source>Edit Image...</source>
<translation>Modifica immagine...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
<source>&amp;Update Image</source>
<translation>Ag&amp;giorna Immagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<source>Adjust Frame to Image</source>
<translation>Adatta cornice all&apos;immagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<source>Extended Image Properties</source>
<translation>Ulteriori proprietà immagini</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<source>Show Control Characters</source>
<translation>Mostra caratteri di controllo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<source>&amp;Align and Distribute</source>
<translation>&amp;Allinea e distribuisci</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<source>Edit Text...</source>
<translation>Modifica testo...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<source>New Line</source>
<translation>Interruzione riga</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<source>Frame Break</source>
<translation>Interruzione cornice</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<source>Column Break</source>
<translation>Interruzione colonna</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<source>Non Breaking Dash</source>
<translation>Trattino protetto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<source>Toggle Guides</source>
<translation>Mostra guide</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<source>&amp;Arrange Pages</source>
<translation>&amp;Disposizione pagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<source>Dehyphenate Text</source>
<translation>Togli sillabazione</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1396"/>
<source>Manage Page Properties...</source>
<translation>Gestione proprietà pagina...</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation type="obsolete">Rulers relative to Page</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1276"/>
<source>Print Previe&amp;w</source>
<translation>Anteprima di &amp;stampa</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1300"/>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScript...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<source>Convert to Master Page...</source>
<translation>Converti in pagina mastro...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<source>&amp;Cascade</source>
<translation>A &amp;Cascata</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<source>&amp;Tile</source>
<translation>A&amp;ffiancate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="0"/>
<source>&amp;About Plug-ins</source>
<translation type="obsolete">&amp;About Plug-ins</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<source>More Info...</source>
<translation>Ulteriori informazioni...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>&amp;Printing Enabled</source>
<translation>Stam&amp;pa abilitata</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Flip Horizontally</source>
<translation>Ri&amp;fletti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>&amp;Flip Vertically</source>
<translation>Ri&amp;balta</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>Show Rulers</source>
<translation>Mostra righelli</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>Sc&amp;hema documento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Solidus</source>
<translation>Barra obliqua</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Middle Dot</source>
<translation>Punto mediano</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1545"/>
<source>En Space</source>
<translation>Semi-spazio</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1546"/>
<source>Em Space</source>
<translation>Spazio lungo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1547"/>
<source>Thin Space</source>
<translation>Spazio sottile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1548"/>
<source>Thick Space</source>
<translation>Spazio spesso</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1549"/>
<source>Mid Space</source>
<translation>Spazio medio</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
<source>Hair Space</source>
<translation>Spazio ultrasottile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1562"/>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1563"/>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1564"/>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1565"/>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1566"/>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1567"/>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1568"/>
<source>st</source>
<translation>st</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>S&amp;tyles...</source>
<translation>S&amp;tili...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>&amp;Contornato</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>C&amp;ontorni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>Paste (&amp;Absolute)</source>
<translation>Incolla (&amp;Assoluto)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>C&amp;lear</source>
<translation>Pu&amp;lisci</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>Insert PDF Push Button</source>
<translation>Inserisci bottone PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Insert PDF Text Field</source>
<translation>Inserisci campo di testo PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<source>Insert PDF Check Box</source>
<translation>Inserisci casella di controllo PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1465"/>
<source>Insert PDF Combo Box</source>
<translation>Inserisci casella combinata PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<source>Insert PDF List Box</source>
<translation>Inserisci lista PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>Insert Text Annotation</source>
<translation>Inserisci annotazione PDF</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>Insert Link Annotation</source>
<translation>Inserisci annotazione collegamento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Save as &amp;EPS...</source>
<translation>Salva pagina in &amp;EPS...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<source>Show Text Frame Columns</source>
<translation>Mostra colonne della cornice testo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>&amp;Frame...</source>
<translation>&amp;Cornice...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Preview Mode</source>
<translation>Anteprima</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<source>Show Layer Indicators</source>
<translation>Mostra indicatori livello</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<source>Patterns...</source>
<translation>Motivi...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>Send to Patterns</source>
<translation>Invia ai motivi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<source>Sticky Tools</source>
<translatorcomment>Adesivi?</translatorcomment>
<translation>Strumenti adesivi</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<source>&amp;Fit to Height</source>
<translation>&amp;Adatta all&apos;altezza</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<source>Fit to Width</source>
<translation>Adatta alla larghezza</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1408"/>
<source>Show Bleeds</source>
<translation>Mostra margini rifilatura</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<source>&amp;Zero Width Space</source>
<translation>Spa&amp;zio larghezza zero</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<source>Zero Width NB Space</source>
<translation>Spazio NB di larghezza zero</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>Apostrofo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1527"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>Virgolette semplici</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1528"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>Virgoletta sx</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1529"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>Virgoletta dx</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1530"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>Virgolette inglesi sx</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1531"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>Virgolette inglesi dx</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1532"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>Virgoletta ribaltata</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1533"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>Virgolette ribaltate</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1534"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>Virgoletta caporale sx (&lt;)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1535"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>Virgoletta caporale dx (&gt;)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1536"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>Virgolette caporali sx («)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1537"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>Virgolette caporali dx (»)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1538"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>Virgoletta bassa (,)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1539"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>Virgolette basse (,,)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1540"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>Apostrofo sx CJK</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1541"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>Apostrofo dx CJK</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1542"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>Virgolette sx CJK</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1543"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>Virgolette dx CJK</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1278"/>
<source>Edit Latex Source...</source>
<translation type="obsolete">Edit Latex Source...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<source>Insert &amp;Text Frame</source>
<translation>Inserisci cornice di &amp;testo</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1453"/>
<source>Insert &amp;Image Frame</source>
<translation>Inserisci cor&amp;nice immagine</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1434"/>
<source>Insert &amp;Latex Frame</source>
<translation type="obsolete">Insert &amp;Latex Frame</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1455"/>
<source>Insert T&amp;able</source>
<translation>Inserisci t&amp;abella</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<source>Insert &amp;Shape</source>
<translation>Inserisci &amp;forma</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<source>Insert &amp;Polygon</source>
<translation>Inserisci poli&amp;gono</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1458"/>
<source>Insert &amp;Line</source>
<translation>Inserisci &amp;Linea</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1459"/>
<source>Insert &amp;Bezier Curve</source>
<translation>Inserisci curva di Be&amp;zier</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1460"/>
<source>Insert &amp;Freehand Line</source>
<translation>Inserisci linea a &amp;mano libera</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
<source>Scribus Homepage</source>
<translation>Homepage di Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1489"/>
<source>Scribus Online Documentation</source>
<translation>Documentazione online di Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<source>Scribus Wiki</source>
<translation>Wiki di Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<source>Getting Started with Scribus</source>
<translation>Primi passi con Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
<source>Show Context Menu</source>
<translation>Mostra menù contesto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1472"/>
<source>&amp;Manage Images</source>
<translation>&amp;Gestione immagini</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1483"/>
<source>&amp;About Plugins</source>
<translation>Inform&amp;azioni estensioni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Inserisci sequenza iniziale di caratteri unicode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
<source>Get Vector File...</source>
<translation>Carica file vettoriale...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1290"/>
<source>Advanced Select All...</source>
<translatorcomment>?</translatorcomment>
<translation>Seleziona tutto avanzato...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<source>Edit Source...</source>
<translatorcomment>???</translatorcomment>
<translation>Modifica origine...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1296"/>
<source>Replace Colors...</source>
<translation>Sostituisci colori...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<source>Rulers Relative to Page</source>
<translation>Righelli relativi alla pagina</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
<source>Insert &amp;Render Frame</source>
<translatorcomment>???</translatorcomment>
<translation>Inse&amp;risci cornice rendering</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1492"/>
<source>Check for Updates</source>
<translation>Controlla aggiornamenti</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<source>Number of Pages</source>
<translation>Numero di pagine</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<source>Adjust Image to Frame</source>
<translation>Adatta immagine alla cornice</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>Move/Resize value indicator</source>
<translation type="obsolete">Move/Resize value indicator</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>File</source>
<translation>File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1690"/>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>Edit</source>
<translation>Modifica</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1692"/>
<source>&amp;Edit</source>
<translation>&amp;Modifica</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>Style</source>
<translation>Stile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1694"/>
<source>&amp;Style</source>
<translation>&amp;Stile</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>Item</source>
<translation>Elemento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1696"/>
<source>&amp;Item</source>
<translation>E&amp;lemento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>Insert</source>
<translation>Inserisci</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1698"/>
<source>I&amp;nsert</source>
<translation>&amp;Inserisci</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>Page</source>
<translation>Pagina</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1700"/>
<source>&amp;Page</source>
<translation>&amp;Pagina</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>View</source>
<translation>Vista</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1702"/>
<source>&amp;View</source>
<translation>&amp;Vista</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>Extras</source>
<translation>Utilità</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1704"/>
<source>E&amp;xtras</source>
<translation>&amp;Utilità</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>Windows</source>
<translation>Finestre</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1706"/>
<source>&amp;Windows</source>
<translation>Fi&amp;nestre</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>Help</source>
<translation>Aiuto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1708"/>
<source>&amp;Help</source>
<translation>&amp;Aiuto</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1876"/>
<source>Plugin Menu Items</source>
<translation>Elementi menù estensioni</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1878"/>
<source>Others</source>
<translation>Altri</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1880"/>
<source>Unicode Characters</source>
<translation>Caratteri Unicode</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Move/Resize Value Indicator</source>
<translation>Indicatore del valore di spostamento/ridimensionamento</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<source>New &amp;from Template...</source>
<translation>Nuovo &amp;da modello...</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
<message>
<location filename="../../scribus/adjustcmsdialog.cpp" line="16"/>
<source>CMS Settings</source>
<translation>Impostazioni CMS</translation>
</message>
</context>
<context>
<name>AlignDistribute</name>
<message>
<location filename="../../scribus/aligndistribute.ui" line="35"/>
<source>Align</source>
<translation>Allinea</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="79"/>
<source>&amp;Selected Guide:</source>
<translation>Guida &amp;selezionata:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="92"/>
<source>&amp;Relative To:</source>
<translation>Rela&amp;tivo a:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="431"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="270"/>
<source>Distribute</source>
<translation>Distribuisci</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.ui" line="490"/>
<source>&amp;Distance:</source>
<translation>&amp;Distanza:</translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="90"/>
<source>Align and Distribute</source>
<translation>Allinea e distribuisci</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="93"/>
<source>&amp;Relative to:</source>
<translation>&amp;Relativo a:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="96"/>
<source>First Selected</source>
<translation>Primo selezionato</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="97"/>
<source>Last Selected</source>
<translation>Ultimo selezionato</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="98"/>
<source>Page</source>
<translation>Pagina</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="99"/>
<source>Margins</source>
<translation>Margini</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="101"/>
<source>Selection</source>
<translation>Selezione</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="111"/>
<source>Align bottoms</source>
<translation>Allinea i lati inferiori</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="113"/>
<source>Align right sides</source>
<translation>Allinea i lati destri</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="117"/>
<source>Center on vertical axis</source>
<translation>Centra sull&apos;asse verticale</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="119"/>
<source>Align left sides</source>
<translation>Allinea i lati sinistri</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="121"/>
<source>Center on horizontal axis</source>
<translation>Centra sull&apos;asse orizzontale</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="125"/>
<source>Align tops</source>
<translation>Allinea i lati superiori</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="145"/>
<source>Distribute left sides equidistantly</source>
<translation>Rendi i lati sinistri equidistanti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="137"/>
<source>Distribute bottoms equidistantly</source>
<translation>Rendi i lati inferiori equidistanti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="139"/>
<source>Distribute centers equidistantly horizontally</source>
<translation>Rendi i centri equidistanti orizzontalmente</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="147"/>
<source>Distribute centers equidistantly vertically</source>
<translation>Rendi i centri equidistanti verticalmente</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="149"/>
<source>Distribute tops equidistantly</source>
<translation>Rendi i lati superiori equidistanti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="135"/>
<source>Distribute right sides equidistantly</source>
<translation>Rendi i lati destri equidistanti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="100"/>
<source>Guide</source>
<translation>Guida</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="127"/>
<source>&amp;Selected Guide:</source>
<translation>Guida &amp;selezionata:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="159"/>
<source>&amp;Distance:</source>
<translation>&amp;Distanza:</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="160"/>
<source>Distribute the items with the distance specified</source>
<translation>Distribuisci gli elementi con la distanza specificata</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="162"/>
<source>None Selected</source>
<translation>Nessuno selezionato</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="440"/>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="448"/>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="107"/>
<source>Align right sides of items to left side of anchor</source>
<translation>Allinea i lati destri degli oggetti al lato sinistro dell&apos;ancora</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="109"/>
<source>Align left sides of items to right side of anchor</source>
<translation>Allinea i lati sinistri degli oggetti al lato destro dell&apos;ancora</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="115"/>
<source>Align tops of items to bottom of anchor</source>
<translation>Allinea i lati superiori degli oggetti al lato basso dell&apos;ancora</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="123"/>
<source>Align bottoms of items to top of anchor</source>
<translation>Allinea i lati inferiori degli oggetti al lato superiore dell&apos;ancora</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="130"/>
<source>Make horizontal gaps between items equal</source>
<translation>Rendi uguale la distanza orizzontale tra gli oggetti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="132"/>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>Fissa la distanza orizzontale tra gli oggetti al valore specificato</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="141"/>
<source>Make vertical gaps between items equal</source>
<translation>Rendi uguale la distanza verticale tra gli oggetti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="143"/>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>Fissa la distanza verticale tra gli oggetti al valore specificato</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="151"/>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>Rendi uguale la distanza orizzontale tra gli oggetti</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="157"/>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>Rendi uguale la distanza verticale tra gli oggetti e i margini superiore e inferiore della pagina</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="155"/>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>Rendi uguale la distanza orizzontale tra gli oggetti e i margini laterali della pagina</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="153"/>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>Rendi uguale la distanza verticale tra gli oggetti e i lati superiore e inferiore della pagina</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="91"/>
<source>Align</source>
<translation>Allinea</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="92"/>
<source>Distribute</source>
<translation>Distribuisci</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="103"/>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;Allinea relativamente al:&lt;ul&gt;&lt;li&gt;Primo oggetto selezionato&lt;/li&gt;&lt;li&gt;Secondo oggetto selezionato&lt;/li&gt;&lt;li&gt;Pagina corrente&lt;/li&gt;&lt;li&gt;Margini della pagina corrente&lt;/li&gt;&lt;li&gt;Una guida&lt;/li&gt;&lt;li&gt;Selezione&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<location filename="../../scribus/aligndistribute.cpp" line="105"/>
<source>The location of the selected guide to align to</source>
<translation>La posizione della guida selezionata a cui allineare</translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<location filename="../../scribus/alignselect.cpp" line="110"/>
<source>Align Text Left</source>
<translation>Testo allineato a sinistra</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="111"/>
<source>Align Text Right</source>
<translation>Testo allineato a destra</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="112"/>
<source>Align Text Center</source>
<translation>Testo centrato</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="113"/>
<source>Align Text Justified</source>
<translation>Testo giustificato</translation>
</message>
<message>
<location filename="../../scribus/alignselect.cpp" line="114"/>
<source>Align Text Forced Justified</source>
<translation>Testo giustificato forzato</translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<location filename="../../scribus/annot.cpp" line="61"/>
<source>Field Properties</source>
<translation>Proprietà campo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="533"/>
<source>Type:</source>
<translation>Tipo:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Button</source>
<translation>Bottone</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Text Field</source>
<translation>Campo di testo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Check Box</source>
<translation>Casella di controllo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>Combo Box</source>
<translation>Casella combinata</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="96"/>
<source>List Box</source>
<translation>Lista</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="111"/>
<source>Properties</source>
<translation>Proprietà</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="121"/>
<source>Name:</source>
<translation>Nome:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="274"/>
<source>Text</source>
<translation>Testo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="176"/>
<source>Border</source>
<translation>Bordo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="182"/>
<source>Color:</source>
<translation>Colore:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2104"/>
<source>None</source>
<translation>Nessuno</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="197"/>
<source>Width:</source>
<translation>Larghezza:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Thin</source>
<translation>Sottile</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="311"/>
<source>Normal</source>
<translation>Normale</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="201"/>
<source>Wide</source>
<translation>Spesso</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="209"/>
<source>Style:</source>
<translation>Stile:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Solid</source>
<translation>Continuo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Dashed</source>
<translation>A trattini</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="213"/>
<source>Underline</source>
<translation>Sottolineato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Beveled</source>
<translation>Smussato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="214"/>
<source>Inset</source>
<translation>Incavato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="224"/>
<source>Other</source>
<translation>Altro</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="230"/>
<source>Read Only</source>
<translation>Solo lettura</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="236"/>
<source>Required</source>
<translation>Necessario</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="248"/>
<source>Visibility:</source>
<translation>Visibilità:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Visible</source>
<translation>Visibile</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>Hidden</source>
<translation>Nascosto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="252"/>
<source>No Print</source>
<translation>Senza stampa</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="253"/>
<source>No View</source>
<translation>Non mostrare</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="262"/>
<source>Appearance</source>
<translation>Aspetto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="280"/>
<source>Text for Button Down</source>
<translation>Testo per bottone premuto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="283"/>
<source>Text for Roll Over</source>
<translation>Testo per scorrimento</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="294"/>
<source>Icons</source>
<translation>Icone</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="300"/>
<source>Use Icons</source>
<translation>Usa icone</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="357"/>
<source>Remove</source>
<translation>Elimina</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="329"/>
<source>Pressed</source>
<translation>Premuto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="347"/>
<source>Roll Over</source>
<translation>Scorrimento</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="366"/>
<source>Icon Placement...</source>
<translation>Disposizione icone...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="414"/>
<source>Highlight</source>
<translation>Evidenziato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Invert</source>
<translation>Inverti</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Outlined</source>
<translation>Contornato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>Push</source>
<translation>Premi</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="438"/>
<source>Multi-Line</source>
<translation>Multilinea</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="442"/>
<source>Password</source>
<translation>Parola d&apos;ordine</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="449"/>
<source>Limit of</source>
<translation>Limite di</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="460"/>
<source>Characters</source>
<translation>Caratteri</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="466"/>
<source>Do Not Scroll</source>
<translation>Non scorrere</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="470"/>
<source>Do Not Spell Check</source>
<translation>Non verificare ortografia</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="485"/>
<source>Check Style:</source>
<translation>Controlla stile:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Check</source>
<translation>Controlla</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Cross</source>
<translation>Croce</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Diamond</source>
<translation>Diamante</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Circle</source>
<translation>Cerchio</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Star</source>
<translation>Stella</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="488"/>
<source>Square</source>
<translation>Quadrato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="502"/>
<source>Default is Checked</source>
<translation>È selezionato di default</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="514"/>
<source>Editable</source>
<translation>Modificabile</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="521"/>
<source>Options</source>
<translation>Opzioni</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>Go To</source>
<translation>Vai a</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Submit Form</source>
<translation>Invia modulo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Reset Form</source>
<translation>Azzera modulo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2068"/>
<source>Import Data</source>
<translation>Importa dati</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="570"/>
<source>Event:</source>
<translation>Evento:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Up</source>
<translation>Bottone mouse rilasciato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Down</source>
<translation>Bottone mouse premuto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2047"/>
<source>Mouse Enter</source>
<translation>Cursore dentro</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>Mouse Exit</source>
<translation>Cursore fuori</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Focus</source>
<translation>Al centro</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2048"/>
<source>On Blur</source>
<translation>Intorno</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="585"/>
<source>Script:</source>
<translation>Script:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1111"/>
<source>Edit...</source>
<translation>Modifica...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="670"/>
<source>Submit to URL:</source>
<translation>URL:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="678"/>
<source>Submit Data as HTML</source>
<translation type="obsolete">Submit Data as HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="707"/>
<source>Import Data from:</source>
<translation>Importa dati da:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="610"/>
<source>Destination</source>
<translation>Destinazione</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="616"/>
<source>To File:</source>
<translation>Al file:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="623"/>
<source>Change...</source>
<translation>Cambia...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="632"/>
<source>Page:</source>
<translation>Pagina:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="646"/>
<source>X-Pos:</source>
<translation>Pos X:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="658"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="654"/>
<source>Y-Pos:</source>
<translation>Pos Y:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="716"/>
<source>Action</source>
<translation>Azione</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="747"/>
<source>Field is formatted as:</source>
<translation>Campo formattato come:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Plain</source>
<translation>Testo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Number</source>
<translation>Numero</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Percentage</source>
<translation>Percentuale</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Date</source>
<translation>Data</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Time</source>
<translation>Ora</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="750"/>
<source>Custom</source>
<translation>Pesonalizzato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="768"/>
<source>Number Format</source>
<translation>Formato numero</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="836"/>
<source>Decimals:</source>
<translation>Decimali:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="791"/>
<source>Use Currency Symbol</source>
<translation>Usa simbolo valuta</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="800"/>
<source>Prepend Currency Symbol</source>
<translation>Simbolo valuta</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="847"/>
<source>Formatting</source>
<translation>Formattazione</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="827"/>
<source>Percent Format</source>
<translation>Formato percentuale</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="870"/>
<source>Date Format</source>
<translation>Formato data</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="896"/>
<source>Time Format</source>
<translation>Formato ora</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="918"/>
<source>Custom Scripts</source>
<translation>Script personalizzati</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="930"/>
<source>Format:</source>
<translation>Format:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="956"/>
<source>Keystroke:</source>
<translation>Tasti da usare:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="980"/>
<source>Format</source>
<translation>Formato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="996"/>
<source>Value is not validated</source>
<translation>Valore non valido</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1005"/>
<source>Value must be greater than or equal to:</source>
<translation>Il valore deve essere maggiore o uguale a:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1009"/>
<source>and less or equal to:</source>
<translation>e minore o uguale a:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1020"/>
<source>Custom validate script:</source>
<translation>Script di convalida personalizzato:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1041"/>
<source>Validate</source>
<translation>Convalida</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1058"/>
<source>Value is not calculated</source>
<translation>Valore non calcolato</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1067"/>
<source>Value is the</source>
<translation>Il valore è</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>sum</source>
<translation>la somma</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>product</source>
<translation>il prodotto</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>average</source>
<translation>la media</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1072"/>
<source>minimum</source>
<translation>il minimo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1073"/>
<source>maximum</source>
<translation>il massimo</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1080"/>
<source>of the following fields:</source>
<translation>dei seguenti campi:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1090"/>
<source>Pick...</source>
<translation>Scegli...</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1095"/>
<source>Custom calculation script:</source>
<translation>Script di calcolo personalizzato:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1115"/>
<source>Calculate</source>
<translation>Calcula</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1134"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1138"/>
<source>Cancel</source>
<translation>Annulla</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1191"/>
<source>Enter a comma separated list of fields here</source>
<translation>Inserisci qui una lista di campi separati da virgola</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1192"/>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>È necessaria almeno l&apos;icona normale per usare un icona come bottone</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<source>Open</source>
<translation>Apri</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1469"/>
<source>Example:</source>
<translation>Esempio:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2096"/>
<source>Selection Change</source>
<translation>Modifica selezione</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="152"/>
<source>Font for use with PDF 1.3:</source>
<translation>Carattere da usare con PDF-1.3:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1190"/>
<source>Flag is ignored for PDF 1.3</source>
<translation>Ignorato per PDF-1.3</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2262"/>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>File PDF (*.pdf);;Tutti i file (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2105"/>
<source>JavaScript</source>
<translation>JavaScript</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="421"/>
<source>None</source>
<comment>highlight</comment>
<translation>Nessuno</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="2067"/>
<source>None</source>
<comment>action</comment>
<translation>Nessuno</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="134"/>
<source>Tooltip:</source>
<translation>Suggerimento:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="242"/>
<source>Do Not Export Value</source>
<translation>Non esportare valore</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1358"/>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>Immagini (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;Tutti i file (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="1303"/>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation>Immagini (*.tif *.png *.jpg *.xpm);;%1;;Yutti i file (*)</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="625"/>
<source>Export absolute Filename</source>
<translation>Esporta il nome assoluto del file</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="682"/>
<source>Submit format:</source>
<translation>Invia formato:</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>FDF</source>
<translation>FDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>HTML</source>
<translation>HTML</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>XFDF</source>
<translation>XFDF</translation>
</message>
<message>
<location filename="../../scribus/annot.cpp" line="685"/>
<source>PDF</source>
<translation>PDF</translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<location filename="../../scribus/annota.cpp" line="47"/>
<source>Annotation Properties</source>
<translation>Proprietà annotazioni</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="77"/>
<source>Text</source>
<translation>Testo</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="78"/>
<source>Link</source>
<translation>Collegamento</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="79"/>
<source>External Link</source>
<translation>Collegamento esterno</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="80"/>
<source>External Web-Link</source>
<translation>Collegamento Web esterno </translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="118"/>
<source>Destination</source>
<translation>Destinazione</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="177"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>Open</source>
<translation>Apri</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="82"/>
<source>&amp;Type:</source>
<translation>&amp;Tipo:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="129"/>
<source>C&amp;hange...</source>
<translation>C&amp;ambia...</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="147"/>
<source>&amp;Page:</source>
<translation>&amp;Pagina:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="171"/>
<source>&amp;X-Pos</source>
<translation>Pos &amp;X</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="179"/>
<source>&amp;Y-Pos:</source>
<translation>Pos &amp;Y:</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="409"/>
<source>%1;;All Files (*)</source>
<translation>%1;;Tutti i File (*)</translation>
</message>
<message>
<location filename="../../scribus/annota.cpp" line="131"/>
<source>Export absolute Filename</source>
<translation>Esporta il nome assoluto del file</translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
<source>Apply Master Page</source>
<translation>Applica pagina mastro</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
<source>&amp;Master Page:</source>
<translation>Pagina &amp;mastro:</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply To</source>
<translation type="obsolete">Apply To</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;page</source>
<translation type="obsolete">Current &amp;page</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even pages</source>
<translation type="obsolete">&amp;Even pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd pages</source>
<translation type="obsolete">O&amp;dd pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All pages</source>
<translation type="obsolete">&amp;All pages</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within range</source>
<translation type="obsolete">&amp;Within range</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
<source>to</source>
<translation>a</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>Applica la pagina mastro selezionata alle pagine pari, dispari o a tutte le pagine dell&apos;intervallo seguente</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
<source>Possible Hyphenation</source>
<translation>Possibile sillabazione</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
<source>Apply to</source>
<translation>Applica a</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
<source>Current &amp;Page</source>
<translation>&amp;Pagina corrente</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
<source>&amp;Even Pages</source>
<translation>Pagin&amp;e pari</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
<source>O&amp;dd Pages</source>
<translation>Pagine &amp;dispari</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
<source>&amp;All Pages</source>
<translation>Tutte le p&amp;agine</translation>
</message>
<message>
<location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
<source>&amp;Within Range</source>
<translation>Nell&apos;inter&amp;vallo</translation>
</message>
</context>
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
<source>Spell-checking support</source>
<translation>Supporto controllo ortografico</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>Aggiungi supporto per la sillabazione tramite Aspell. Le lingue possono essere scelte tra quelle dei dizionari aspell installati, e il controllo ortografico può essere effettuato al volo o sul testo selezionato.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
<source>Spell Checker</source>
<translation>Controllore ortografico</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
<source>Aspell Plugin Error</source>
<translation>Errore dell&apos;estensione Aspell</translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
<source>Spell Check</source>
<translation>Controllo ortografico</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
<source>Replacement:</source>
<translation>Sostituzione:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
<source>&amp;Add Word</source>
<translation>&amp;Aggiungi termine</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
<source>&amp;Change</source>
<translation>&amp;Cambia</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="351"/>
<source>&amp;Exit</source>
<translation type="obsolete">&amp;Exit</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
<source>Not in Dictionary:</source>
<translation>Non nel dizionario:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
<source>Word that was not found in the active dictionary</source>
<translation>Termine non trovato nel dizionario attivo</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
<source>Replacement text for the current word that was not found in the dictionary</source>
<translation>Testo sostitutivo per il termine corrente non trovato nel dizionario</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
<source>Active Dictionary: </source>
<translation>Dizionario attivo: </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
<source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
<translation>Il dizionario attivo corrente. Scribus utilizza aspell come supporto per il dizionario.&lt;/br&gt;Nel caso si necessiti di aggiornamenti o di ulteriori dizionari, installarli tramite il vostro sistema o il vostro package manager.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
<source>Ignore the current text not found in the active dictionary</source>
<translation>Ignora il testo corrente non trovato nel dizionario attivo</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
<source>&amp;Ignore</source>
<translation>&amp;Ignora</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
<source>Ignore all occurrences of the current text not found in the active dictionary</source>
<translation>Ignora tutte le occorrenze del testo attuale non trovato nel dizionario attivo</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
<source>I&amp;gnore All</source>
<translation>I&amp;gnora tutti</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
<source>Add the current word to the your personal spelling dictionary for future use</source>
<translation>Aggiungi il termine corrente al dizionario ortografico personalizzato per un futuro utilizzo</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
<source>Change the current word that was not found to that shown in the replacement entry field</source>
<translation>Cambia il termine corrente, non trovato, con quello mostrato nel campo di sostituzione</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
<source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
<translation>Cambia tutte le occorrenze del termine attuale, non trovato, con quello mostrato nel campo di sostituzione</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
<source>Change A&amp;ll</source>
<translation>C&amp;ambia tutti</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
<source>Close</source>
<translation>Chiudi</translation>
</message>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source>Loaded </source>
<translation>Caricato</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source>default </source>
<translation>predefinito</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="37"/>
<source> aspell dictionary.</source>
<translation> dizionario aspell.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="84"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Errore nella configurazione aspell speller.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="91"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): Errore nella creazione di aspell speller.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="359"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): Impossibile saltare tutte le istanza di &quot;</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
<source> by adding it to the session list.</source>
<translation> aggiungendolo alla lista della sessione.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="382"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): Impossibile aggiuntere il termine alla lista personale.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="235"/>
<source>Spelling check complete</source>
<translation>Controllo ortografico completo</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="427"/>
<source>Spell Checker</source>
<translation>Controllore ortografico</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="62"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation>Non è stato trovato nessun dizionario Aspell dispobile. Si prega di Installarne uno.</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="429"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation>Si vuole cominciare dall&apos;inizio della selezione con la nuova lingua selezionata?</translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
<source>Arrows</source>
<translation>Frecce</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
<source>Flow Chart</source>
<translation>Diagramma di flusso</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
<source>Jigsaw</source>
<translation>Mosaico</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
<source>Specials</source>
<translation>Speciali</translation>
</message>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
<source>Default Shapes</source>
<translation>Forme predefinite</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<location filename="../../scribus/autoformbuttongroup.cpp" line="0"/>
<source>&amp;Barcode Generator...</source>
<translation type="obsolete">&amp;Barcode Generator...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="obsolete">Scribus frontend for Pure Postscript Barcode Writer</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
<source>&amp;Barcode...</source>
<translation>Codice a &amp;Barrre...</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation>Interfaccia Scribus per elaborare codice a barre in puro Postscript</translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
<source>Error opening file: %1</source>
<translation>Errore nell&apos;apertura del file: %1</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
<source>12 or 13 digits</source>
<translation>12 o 13 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
<source>8 digits</source>
<translation>8 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
<source>11 or 12 digits</source>
<translation>11 o 12 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
<source>7 or 8 digits</source>
<translation>7 o 8 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
<source>5 digits</source>
<translation>5 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
<source>2 digits</source>
<translation>2 cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
<source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
<translation>Numero variabile di caratteri, cifre e uno dei simboli -. *$/+%.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
<source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
<translation>Numero variabile di caratteri ASCII e simboli per una funzione speciale, che comincia con un carattere iniziale appropriato per il set di caratteri. UCC/EAN-128s deve avere obbligatoriamente un simbolo FNC 1 che segue immediatamente il carattere iniziale.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
<source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
<translation>Numero variabile di cifre e uno dei simboli -$:/.+ABCD.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
<source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
<translation>Numero variabile di cifre. Un ITF-14 è composto di 14 caratteri e non ha una cifra di controllo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
<source>Variable number of digits</source>
<translation>Numero variabile di cifre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
<source>Variable number of digits and capital letters</source>
<translation>Numero variabile di cifre di cifre e lettere maiuscole</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
<source>Variable number of hexadecimal characters</source>
<translation>Numero variabile di caratteri esadecimali</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
<source>Barcode incomplete</source>
<translation>Codice incompleto</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
<source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
<translation>12 o 13 cifre con trattini. Il vecchio formato ISBN-10 accetta 9 o 10 cifre con trattini, ma questo standard è stato deprecato per l&apos;uso pubblico dal 1° gennaio 2007. (Nota: Per convertire un vecchio ISBN-10 in un nuovo ISBN-13, aggiungere la tripletta 978- all&apos;inizio delle 9 cifre, es. 1-56592-479-7 -&gt; 978-1-56592-479. La cifra finale di controllo sarà calcolata automaticamente.)</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
<source>Select Type</source>
<translation>Seleziona tipo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
<source>Select Barcode Type</source>
<translation>Seleziona il tipo di codice a barre</translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode Creator</source>
<translation type="obsolete">Barcode Creator</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="0"/>
<source>Barcode</source>
<translation type="obsolete">Barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="140"/>
<source>&amp;Type:</source>
<translation>&amp;Tipo:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
<source>Select one of the available barcode type here</source>
<translation>Seleziona uno dei codici a barre disponibili</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>La rappresentazione numerica del codice. Vedere l&apos;aiuto qui sotto</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
<source>Reset the barcode samples</source>
<translation>Impostazioni predefinite dei modelli di codici a barre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
<source>&amp;Include text in barcode</source>
<translation type="obsolete">&amp;Include text in barcode</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
<source>If checked, there will be numbers in the barcode too</source>
<translation>Se smarcato, il codice a barre conterrà anche dei numeri</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
<source>&amp;Guard whitespace</source>
<translation type="obsolete">&amp;Guard whitespace</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
<source>Draw arrows to be sure of space next the code</source>
<translation>Disegna frecce per lasciare spazio vicino al codice</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
<source>Colors</source>
<translation>Colori</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="184"/>
<source>&amp;Background</source>
<translation>S&amp;fondo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
<source>Alt+B</source>
<translation>Alt+F</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
<source>Background color - under the code lines</source>
<translation>Colore di sfondo - sotto le barre del codice</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
<source>&amp;Lines</source>
<translation>&amp;Linee</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
<source>Color of the lines in barcode</source>
<translation>Colore delle barre nel codice</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
<source>&amp;Text</source>
<translation>&amp;Testo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
<source>Color of the text and numbers</source>
<translation>Colore del testo e dei numeri</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
<source>Hints and help is shown here</source>
<translation>Suggerimenti ed aiuto</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
<source>Preview of the result. 72dpi sample.</source>
<translation>Anteprima del codice a 72dpi.</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="120"/>
<source>Co&amp;de:</source>
<translation>C&amp;odice:</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
<source>I&amp;nclude checksum</source>
<translation type="obsolete">I&amp;nclude checksum</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
<source>Generate and include a checksum in barcode</source>
<translation>Genera e includi un codice di controllo nel codice a barre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
<source>Incl&amp;ude checksum digit</source>
<translation type="obsolete">Incl&amp;ude checksum digit</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
<source>Include the checksum digit in the barcode text</source>
<translation>Includi la cifra di controllo nel testo del codice a barre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
<source>Insert Barcode</source>
<translation>Inserisci codice a barre</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
<source>Format</source>
<translation>Formato</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
<source>Incl&amp;ude Checksum Digit</source>
<translation>Incl&amp;udi cifra controllo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
<source>I&amp;nclude Checksum</source>
<translation>I&amp;ncludi codice di controllo</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="65"/>
<source>&amp;Guard Whitespace</source>
<translation>&amp;Conserva gli spazi bianchi</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
<source>&amp;Include Text in Barcode</source>
<translation>&amp;Includi un testo nel codice a barre</translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
<source>Scrapbook</source>
<translation>Biblioteca</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
<source>Delete</source>
<translation>Elimina</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
<source>Object</source>
<translation>Oggetto</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>New Entry</source>
<translation>Nuova voce</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
<source>Rename</source>
<translation>Rinomina</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
<source>&amp;Name:</source>
<translation>&amp;Nome:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>Il nome &quot;%1&quot; non è univoco.
Si prega di sceglierne un altro.</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
<source>Choose a Scrapbook Directory</source>
<translation>Scegli una cartella per la Biblioteca</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
<source>Choose a Directory</source>
<translation>Scegli una cartella</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
<source>Choose a scrapbook file to import</source>
<translation>Scegli un file biblioteca da importare</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
<source>Create a new scrapbook page</source>
<translation>Crea una nuova pagina di biblioteca</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
<source>Load an existing scrapbook</source>
<translation>Carica una biblioteca esistente</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
<source>Save the selected scrapbook</source>
<translation>Salva la biblioteca selezionata</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Importa un file biblioteca da Scribus &lt;=1.3.2</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
<source>Close the selected scrapbook</source>
<translation>Chiudi la biblioteca selezionata</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
<source>Copy To:</source>
<translation>Copia in:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
<source>Move To:</source>
<translation>Sposta in:</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
<source>Main</source>
<translation>Principale</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
<source>Copied Items</source>
<translation>Elementi copiati</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
<source>New Name</source>
<translation>Nuovo nome</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>Biblioteca (*.scs *.SCS)</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
<source>Paste to Page</source>
<translation>Incolla nella pagina</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
<source>Save as...</source>
<translation>Salva come...</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
<source>Close</source>
<translation>Chiudi</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
<source>Delete Contents</source>
<translation>Elimina contenuto</translation>
</message>
<message>
<location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
<source>Do you really want to delete all entries?</source>
<translation>Vuoi veramente eliminare tutte le voci?</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
<source>Bookmarks</source>
<translation>Segnalibri</translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<location filename="../../scribus/buttonicon.cpp" line="29"/>
<source>Icon Placement</source>
<translation>Disposizione icone</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="38"/>
<source>Layout:</source>
<translation>Aspetto:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption only</source>
<translation>Solo intestazione</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Icon only</source>
<translation>Solo icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption below Icon</source>
<translation>Intestazione sotto icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="41"/>
<source>Caption above Icon</source>
<translation>Intestazione sopra icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption right to Icon</source>
<translation>Intestazione a destra dell&apos;icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption left to Icon</source>
<translation>Intestazione a sinistra dell&apos;icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="42"/>
<source>Caption overlays Icon</source>
<translation>Intestazione attraverso l&apos;icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="50"/>
<source>Scale:</source>
<translation>Scala:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>Always</source>
<translation>Sempre</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>When Icon is too big</source>
<translation>Quando l&apos;icona è troppo grande</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="56"/>
<source>Never</source>
<translation>Mai</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="63"/>
<source>Scale How:</source>
<translation>Riscala come:</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="66"/>
<source>Proportional</source>
<translation>Proporzionale</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="67"/>
<source>Non Proportional</source>
<translation>Non Proporzionale</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="90"/>
<source>Icon</source>
<translation>Icona</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="117"/>
<source>OK</source>
<translation>OK</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="121"/>
<source>Cancel</source>
<translation>Annulla</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="124"/>
<source>Reset</source>
<translation>Azzera</translation>
</message>
<message>
<location filename="../../scribus/buttonicon.cpp" line="55"/>
<source>When Icon is too small</source>
<translation>Quando l&apos;icona è troppo piccola</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="34"/>
<source>System Profiles</source>
<translation type="obsolete">System Profiles</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="89"/>
<source>Rendering Intents</source>
<translation type="obsolete">Rendering Intents</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<source>Perceptual</source>
<translatorcomment>Da controllare</translatorcomment>
<translation>Percettivo</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="69"/>
<source>Relative Colorimetric</source>
<translation>Colorimetrico relativo</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<source>Saturation</source>
<translation>Saturazione</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="70"/>
<source>Absolute Colorimetric</source>
<translation>Colorimetrico assoluto</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="143"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="144"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation type="obsolete">Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="150"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation type="obsolete">Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="147"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="149"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation type="obsolete">Method of showing colours on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="31"/>
<source>&amp;Activate Color Management</source>
<translation type="obsolete">&amp;Activate Colour Management</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="75"/>
<source>&amp;Monitor:</source>
<translation type="obsolete">&amp;Monitor:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="83"/>
<source>P&amp;rinter:</source>
<translation type="obsolete">P&amp;rinter:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="113"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation type="obsolete">Sim&amp;ulate Printer on the Screen</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="130"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation type="obsolete">Mark Colours out of &amp;Gamut</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="134"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation type="obsolete">Use &amp;Blackpoint Compensation</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;RGB Pictures:</source>
<translation type="obsolete">&amp;RGB Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>&amp;CMYK Pictures:</source>
<translation type="obsolete">&amp;CMYK Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="139"/>
<source>Default color profile for imported CMYK images</source>
<translation type="obsolete">Default colour profile for imported CMYK images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="140"/>
<source>Default color profile for imported RGB images</source>
<translation type="obsolete">Default colour profile for imported RGB images</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="59"/>
<source>&amp;RGB Solid Colors:</source>
<translation type="obsolete">&amp;RGB Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="67"/>
<source>&amp;CMYK Solid Colors:</source>
<translation type="obsolete">&amp;CMYK Solid Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="0"/>
<source>Pictures:</source>
<translation type="obsolete">Pictures:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="106"/>
<source>Sol&amp;id Colors:</source>
<translation type="obsolete">Sol&amp;id Colours:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="121"/>
<source>Convert all colors to printer space</source>
<translation type="obsolete">Convert all colours to printer space</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="141"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation type="obsolete">Default colour profile for solid RGB colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="142"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation type="obsolete">Default colour profile for solid CMYK colours on the page</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="145"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for solid colours. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="146"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation type="obsolete">Default rendering intent for images. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="148"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation type="obsolete">Simulate a full colour managed environment :
all colours, rgb or cmyk, are converted to printer colour space.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefs.cpp" line="98"/>
<source>Images:</source>
<translation type="obsolete">Images:</translation>
</message>
</context>
<context>
<name>CMSPrefsBase</name>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="19"/>
<source>Form</source>
<translation>Formulario</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="40"/>
<source>&amp;Activate Color Management</source>
<translation>Atti&amp;va la gestione dei colori</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="50"/>
<source>System Profiles</source>
<translation>Profili del sistema</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="74"/>
<source>&amp;RGB Images:</source>
<translation>I&amp;mmagini RGB:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="90"/>
<source>Default color profile for imported RGB images</source>
<translation>Profilo di colore predefinito per immagini RGB importate</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="97"/>
<source>&amp;CMYK Images:</source>
<translation>Immagini CM&amp;YK:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="113"/>
<source>Default color profile for imported CMYK images</source>
<translation>Profilo di colore predefinito per immagini CMYK importate</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="120"/>
<source>&amp;RGB Solid Colors:</source>
<translation>Tinte unite R&amp;GB:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="136"/>
<source>Default color profile for solid RGB colors on the page</source>
<translation>Profilo di colore predefinito per tinte unite RGB nella pagina</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="143"/>
<source>&amp;CMYK Solid Colors:</source>
<translation>Tinte unite &amp;CMYK:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="159"/>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>Profilo di colore predefinito per tinte unite CMYK nella pagina</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="166"/>
<source>&amp;Monitor:</source>
<translation>&amp;Schermo:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="182"/>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>Profilo di colore generato dall&apos;utente o ricevuto dal produttore.
Questo profilo dovrebbe essere specifico per lo schermo in uso e non un profilo generico (es. sRGB).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="190"/>
<source>P&amp;rinter:</source>
<translation>Stam&amp;pante:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="206"/>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>Profilo di colore per la stampante in uso come da indicazioni del produttore.
Questo profilo dovrebbe essere specifico per la stampante in uso e non generico (es. &apos;sRGB&apos;).</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="220"/>
<source>Rendering Intents</source>
<translation>Intenti rendering</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="244"/>
<source>Images:</source>
<translation>Immagini:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="260"/>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Intento rendering predefinito per la stampante in uso. Altrimenti bisogna sapere perché modificarlo.
Dovrebbe essere scelto il colorimetrico relativo o percettivo.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="268"/>
<source>Sol&amp;id Colors:</source>
<translation>Tin&amp;te unite:</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="284"/>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>Intento rendering predefinito per le tinte unite. Altrimenti bisogna sapere perché modificarlo.
Dovrebbe essere scelto il colorimetrico relativo o percettivo.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="298"/>
<source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
<translation>Abilita la prova colore di come i colori del documento verranno
stampati, basato sul profilo di stampante scelto.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="302"/>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>Sim&amp;ulazione di stampa su schermo</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="329"/>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translatorcomment>Da controllare</translatorcomment>
<translation>Simulzione di un ambiente gestito per tutti i tipi di colore :
Tutti i colori, rgb o cmyk, sono convertiti nello spazio colori della stampante.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="333"/>
<source>Convert all colors to printer space</source>
<translatorcomment>Da controllare</translatorcomment>
<translation>Converti tutti i colori in spazio colori della stampante</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="340"/>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>Metodo di visualizzazione dei colori sullo schermo che può non funzionare bene.
Necessita di profili precisi e serve solo come un avviso.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="344"/>
<source>Mark Colors out of &amp;Gamut</source>
<translation>Segna colori fuori &amp;gamma</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="357"/>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>La Compensazione del Punto Nero (Black Point Compensation) è un metodo di miglioramento del contrasto nelle foto.
Si raccomanda di abilitarlo se si hanno foto nel documento.</translation>
</message>
<message>
<location filename="../../scribus/cmsprefsbase.ui" line="361"/>
<source>Use &amp;Blackpoint Compensation</source>
<translation>Usa &amp;Compensazione Punto Nero</translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../scribus/cmykfw.cpp" line="92"/>
<source>Edit Color</source>
<translation>Modifica colore</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="906"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="911"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="764"/>
<source>Web Safe RGB</source>
<translation>RGB per Web</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="141"/>
<source>New</source>
<translation>Nuovo</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="158"/>
<source>Old</source>
<translation>Vecchio</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="705"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="706"/>
<source>M:</source>
<translation>M:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="707"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="347"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="444"/>
<source>Dynamic Color Bars</source>
<translation>Barre di colore dinamiche</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="442"/>
<source>Static Color Bars</source>
<translation>Barre di colore statiche</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="749"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="750"/>
<source>G:</source>
<translation>V:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="751"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="704"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="195"/>
<source>HSV-Colormap</source>
<translation type="obsolete">HSV-Colourmap</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="101"/>
<source>&amp;Name:</source>
<translation>&amp;Nome:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="111"/>
<source>Color &amp;Model</source>
<translation>&amp;Modello di colore</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="125"/>
<source>Is Spot Color</source>
<translation>Colore a tinta piatta</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Is Registration Color</source>
<translation type="obsolete">Is Registration Colour</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1002"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>Non è possibile creare un colore chiamato &quot;%1&quot;.
È un nome riservato per un colore trasparente</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="0"/>
<source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
<translation type="obsolete">Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1011"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation>Il nome scelto per questo colore esiste già.
Inserire un nome diverso.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation>Choosing this will make this colour a spot colour, thus creating another spot when creating plates or separations. This is used most often when a logo or other colour needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="785"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>If colour management is enabled, a triangle warning indicator is a warning that the colour maybe outside of the colour gamut of the current printer profile selected. What this means is the colour may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Colour Management.</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="995"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>You cannot create a colour without a namePlease give it a name</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="196"/>
<source>HSV Color Map</source>
<translation>Mappa di colori HSV</translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
<source>Merging colors</source>
<translation>Colori da fondere</translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Error: </source>
<translation>Errore: </translation>
</message>
<message>
<location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
<source>Color %1 exists already!</source>
<translation>Il colore %1 già esiste!</translation>
</message>
<message>
<location file