Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 12563 → Rev 12564

/trunk/Scribus/translations/po/scribus.ko.ts
0,0 → 1,25162
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1" language="ko_KR">
<defaultcodec></defaultcodec>
<context>
<name>@default</name>
<message>
<source>getColorNames() -> list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished" />
</message>
<message>
<source>newDocDialog() -> bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished" />
</message>
<message>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -> bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type> e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you'll usually want 1, it's useful to have higher
numbers if you're creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFillColor([&quot;name&quot;]) -> string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished" />
</message>
<message>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type>).
</source>
<translation type="unfinished" />
</message>
<message>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -> specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -> specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -> specifies the linespacing if using fixed linespacing
 
alignment [optional] -> specifies the alignment of the paragraph
 
-> left: 0
 
-> center: 1
 
-> right: 2
 
-> justify: 3
 
-> extend: 4
 
leftmargin [optional], rightmargin [optional] -> specify the margin
 
gapbefore [optional], gapafter [optional] -> specify the gaps to the heading and following paragraphs
 
firstindent [optional] -> the indent of the first line
 
hasdropcap [optional] -> specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -> height (in lines) of the caps if used
 
dropcapoffset [optional] -> offset of the caps if used
 
&quot;charstyle&quot; [optional] -> char style to use
 
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFontSize([&quot;name&quot;]) -> float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or 'unicode' string(recommended).
</source>
<translation type="unfinished" />
</message>
<message>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="unfinished" />
</message>
</context>
<context>
<name>@default</name>
<message>
<source>getColor(&quot;name&quot;) -> tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getColorAsRGB(&quot;name&quot;) -> tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn't found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -> integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox('Script failed',
'This script only works when you have a text frame selected.',
ICON_ERROR)
result = messageBox('Monkeys!', 'Something went ook! &lt;i>Was it a monkey?&lt;/i>',
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished" />
</message>
<message>
<source>valueDialog(caption, message [,defaultvalue]) -> string
 
Shows the common 'Ask for string' dialog and returns its value as a string
Parameters: window title, text in the window and optional 'default' value.
 
Example: valueDialog('title', 'text in the window', 'optional')
</source>
<translation type="unfinished" />
</message>
<message>
<source>newStyleDialog() -> string
 
Shows 'Create new paragraph style' dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished" />
</message>
<message>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -> bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type> e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you'll usually want 1, it's useful to have higher
numbers if you're creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished" />
</message>
<message>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="unfinished" />
</message>
<message>
<source>haveDoc() -> bool
 
Returns true if there is a document open.
</source>
<translation type="unfinished" />
</message>
<message>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished" />
</message>
<message>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished" />
</message>
<message>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type>.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getUnit() -> integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished" />
</message>
<message>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished" />
</message>
<message>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="unfinished" />
</message>
<message>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished" />
</message>
<message>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished" />
</message>
<message>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineColor([&quot;name&quot;]) -> string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineWidth([&quot;name&quot;]) -> integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineShade([&quot;name&quot;]) -> integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineEnd([&quot;name&quot;]) -> integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineStyle([&quot;name&quot;]) -> integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFillShade([&quot;name&quot;]) -> integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getImageScale([&quot;name&quot;]) -> (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getImageName([&quot;name&quot;]) -> string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getSize([&quot;name&quot;]) -> (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type>
for reference.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getRotation([&quot;name&quot;]) -> integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getAllObjects() -> list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property' of `object'. See getProperty()
for details of arguments.
 
If `includesuper' is true, search inherited properties too.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object'.
If `includesuper' is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getProperty(object, property)
 
Return the value of the property `property' of the passed `object'.
 
The `object' argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property' argument must be a string, and is the name of the property
to look up on `object'.
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setProperty(object, property, value)
 
Set `property' of `object' to `value'. If `value' cannot be converted to a type
compatible with the type of `property', an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="unfinished" />
</message>
<message>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished" />
</message>
<message>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getSelectedObject([nr]) -> string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished" />
</message>
<message>
<source>selectionCount() -> integer
 
Returns the number of selected objects.
</source>
<translation type="unfinished" />
</message>
<message>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished" />
</message>
<message>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished" />
</message>
<message>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished" />
</message>
<message>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>lockObject([&quot;name&quot;]) -> bool
 
Locks the object &quot;name&quot; if it's unlocked or unlock it if it's locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLocked([&quot;name&quot;]) -> bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection>)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe'.
If `proportional' is specified, set fixed aspect ratio scaling to `proportional'.
Both `scaletoframe' and `proportional' are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFontNames() -> list
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getXFontNames() -> list of tuples
 
Returns a larger font info. It's a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished" />
</message>
<message>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -> bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can't be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLayers() -> list
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getActiveLayer() -> string
 
Returns the name of the current active layer.
</source>
<translation type="unfinished" />
</message>
<message>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLayerPrintable(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn't
exists or if it's the only layer in the document.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getGuiLanguage() -> string
 
Returns a string with the -lang value.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createText(x, y, width, height, [&quot;name&quot;]) -> string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -> string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createPolyLine(list, [&quot;name&quot;]) -> string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createPolygon(list, [&quot;name&quot;]) -> string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createBezierLine(list, [&quot;name&quot;]) -> string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don't group into points without leftovers.
</source>
<translation type="unfinished" />
</message>
<message>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -> string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that's already used.
May raise NotFoundError if one or both of the named base object don't exist.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished" />
</message>
<message>
<source>objectExists([&quot;name&quot;]) -> bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it's applied on the selected object.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getAllStyles() -> list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished" />
</message>
<message>
<source>currentPage() -> integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished" />
</message>
<message>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="unfinished" />
</message>
<message>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished" />
</message>
<message>
<source>pageCount() -> integer
 
Returns the number of pages in the document.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getHGuides() -> list
 
Returns a list containing positions of the horizontal guides. Values are in the
document's current units - see UNIT_&lt;type> constants.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type> constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished" />
</message>
<message>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPageSize() -> tuple
 
Returns a tuple with page dimensions measured in the document's current units.
See UNIT_&lt;type> constants and getPageMargins()
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPageItems() -> list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [('Text1', 4, 0), ('Image1', 2, 1)]
means that object named 'Text1' is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type> constants and getPageSize().
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type>.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type>.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style>.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn't exist.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFont([&quot;name&quot;]) -> string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getTextLength([&quot;name&quot;]) -> integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getText([&quot;name&quot;]) -> string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getAllText([&quot;name&quot;]) -> string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineSpacing([&quot;name&quot;]) -> float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getColumnGap([&quot;name&quot;]) -> float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getColumns([&quot;name&quot;]) -> integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, 'iso-8859-2'). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that's out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished" />
</message>
<message>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished" />
</message>
<message>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished" />
</message>
<message>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished" />
</message>
<message>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg 'a->b->c' becomes 'a->c' when you unlinkTextFrames(b)'
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished" />
</message>
<message>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished" />
</message>
<message>
<source>textOverflows([&quot;name&quot;, nolinks]) -> integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn't
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>isPDFBookmark([&quot;name&quot;]) -> bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished" />
</message>
<message>
<source>progressTotal(max)
 
Sets the progress bar's maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished" />
</message>
<message>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech's Qt docs]
</source>
<translation type="unfinished" />
</message>
<message>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished" />
</message>
<message>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It's
useful to call this procedure when you're changing the document, because Scribus
won't automatically notice when you change the document using a script.
</source>
<translation type="unfinished" />
</message>
<message>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFillTransparency([&quot;name&quot;]) -> float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getFillBlendmode([&quot;name&quot;]) -> integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineTransparency([&quot;name&quot;]) -> float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineBlendmode([&quot;name&quot;]) -> integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLayerLocked(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLayerOutlined(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLayerFlow(&quot;layer&quot;) -> bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLayerBlendmode(&quot;layer&quot;) -> int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLayerTransparency(&quot;layer&quot;) -> float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished" />
</message>
<message>
<source>duplicateObject([&quot;name&quot;]) -> string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished" />
</message>
<message>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -> bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPageType() -> integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished" />
</message>
<message>
<source>getTextLines([&quot;name&quot;]) -> integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getCornerRadius([&quot;name&quot;]) -> integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getPosition([&quot;name&quot;]) -> (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type> for reference.
</source>
<translation type="unfinished" />
</message>
<message>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won't be printed.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>isLayerVisible(&quot;layer&quot;) -> bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type>
constants.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can't be found.
May raise ValueError if the layer name isn't acceptable.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="unfinished" />
</message>
<message>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="unfinished" />
</message>
<message>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="unfinished" />
</message>
<message>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -> string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don't want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form 'comment (*.type *.type2 ...)'.
For example 'Images (*.png *.xpm *.jpg)'.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog('Open input', 'CSV files (*.csv)')
Example: fileDialog('Save report', defaultname='report.txt', issave=True)
</source>
<translation type="unfinished" />
</message>
<message>
<source>getLineJoin([&quot;name&quot;]) -> integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished" />
</message>
<message>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn't (currently) change the page the user's view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="unfinished" />
</message>
<message>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="unfinished" />
</message>
<message>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page->Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="unfinished" />
</message>
<message>
<source>createCharStyle(...)
 
Creates a character style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -> name of the char style to create
 
&quot;font&quot; [optional] -> name of the font to use
 
fontsize [optional] -> font size to set (double)
 
&quot;features&quot; [optional] -> nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):
 
-> inherit
 
-> bold
 
-> italic
 
-> underline
 
-> underlinewords
 
-> strike
 
-> superscript
 
-> subscript
 
-> outline
 
-> shadowed
 
-> allcaps
 
-> smallcaps
 
&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -> specify fill options
 
&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -> specify stroke options
 
baselineoffset [optional] -> offset of the baseline
 
shadowxoffset [optional], shadowyoffset [optional] -> offset of the shadow if used
 
outlinewidth [optional] -> width of the outline if used
 
underlineoffset [optional], underlinewidth [optional] -> underline options if used
 
strikethruoffset [optional], strikethruwidth [optional] -> strikethru options if used
 
scaleh [optional], scalev [optional] -> scale of the chars
 
tracking [optional] -> tracking of the text
 
&quot;language&quot; [optional] -> language code
 
</source>
<translation type="unfinished" />
</message>
<message>
<source>hyphenateText([&quot;name&quot;]) -> bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>dehyphenateText([&quot;name&quot;]) -> bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished" />
</message>
<message>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="unfinished" />
</message>
<message>
<source>getTextDistances([&quot;name&quot;]) -> tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished" />
</message>
<message>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="unfinished" />
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<source>Importing: %1</source>
<translation>들여오는 중: %1</translation>
</message>
<message>
<source>Analyzing File:</source>
<translation>파일 분석 중:</translation>
</message>
<message>
<source>Group%1</source>
<translation>그룹 %1</translation>
</message>
<message>
<source>Generating Items</source>
<translation>객체 생성 중</translation>
</message>
</context>
<context>
<name>About</name>
<message>
<source>About Scribus %1</source>
<translation>Scribus %1에 대하여</translation>
</message>
<message>
<source>%1 %2 %3</source>
<translation>%1 %2 %3</translation>
</message>
<message>
<source>%3-%2-%1 %4 %5</source>
<translation>%3-%2-%1 %4 %5</translation>
</message>
<message>
<source>Using Ghostscript version %1</source>
<translation>Ghostscript버전 %1 사용 중</translation>
</message>
<message>
<source>No Ghostscript version available</source>
<translation>사용 가능한 Ghostscript 버전이 없습니다</translation>
</message>
<message>
<source>Build ID:</source>
<translation>빌드ID:</translation>
</message>
<message>
<source>&amp;About</source>
<translation>대하여(&amp;A)</translation>
</message>
<message>
<source>Development Team:</source>
<translation>개발팀:</translation>
</message>
<message>
<source>Contributions from:</source>
<translation>기여:</translation>
</message>
<message>
<source>Mac OS&amp;#174; X Aqua Port:</source>
<translation>맥 OS&amp;#174; X 아쿠아 포트:</translation>
</message>
<message>
<source>Windows&amp;#174; Port:</source>
<translation>윈도우&amp;#174; 포트:</translation>
</message>
<message>
<source>Official Documentation:</source>
<translation>공식 문서:</translation>
</message>
<message>
<source>Other Documentation:</source>
<translation>기타 문서:</translation>
</message>
<message>
<source>A&amp;uthors</source>
<translation>저자(&amp;U)</translation>
</message>
<message>
<source>Official Translations and Translators:</source>
<translation>공식 번역 및 번역자:</translation>
</message>
<message>
<source>Previous Translation Contributors:</source>
<translation>기존 번역 기여자:</translation>
</message>
<message>
<source>&amp;Translations</source>
<translation>번역(&amp;T)</translation>
</message>
<message>
<source>Homepage</source>
<translation>홈페이지</translation>
</message>
<message>
<source>Online Reference</source>
<translation>온라인 참조</translation>
</message>
<message>
<source>Wiki</source>
<translation>Wiki</translation>
</message>
<message>
<source>Bugs and Feature Requests</source>
<translation>버그와 특성 요청</translation>
</message>
<message>
<source>Mailing List</source>
<translation>메일링 목록</translation>
</message>
<message>
<source>&amp;Online</source>
<translation>온라인(&amp;O)</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>Tango Project Icons:</source>
<translation>Tango 프로젝트 아이콘:</translation>
</message>
<message>
<source>&amp;Updates</source>
<translation>업데이트(&amp;U)</translation>
</message>
<message>
<source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
<translation>Scribus를 업데이트하기 위하여 체크합니다. 여러분의 PC의 자료는 전송되지 않습니다.</translation>
</message>
<message>
<source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
<translation>OS/2&amp;#174;/eComStation&amp;#8482; 포트:</translation>
</message>
<message>
<source>Splash Screen:</source>
<translation>스플래시 화면:</translation>
</message>
<message>
<source>This panel shows the version, build date and compiled in library support in Scribus.</source>
<translation>Scribus에서,버전과 빌드 날짜 그리고 컴파일된 라이브러리 지원을 나타냅니다.</translation>
</message>
<message>
<source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
<translation>C-C-T-F는 C=littlecms C=CUPS T=TIFF지원 F=Fontconfig지원과 같습니다. 최종 문자는 렌더러 C=cairo 또는 Q=Qt입니다</translation>
</message>
<message>
<source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
<translation>*.은 빠진 라이브러리 지원을 나타냅니다. 이것은 또한 Scribus가 인지한 Ghostscript 버전을 나타냅니다.</translation>
</message>
<message>
<source>The Windows version does not use fontconfig or CUPS libraries.</source>
<translation>Windows 버전은 fontconfig 또는 CUPS 라이브러리를 이용하지 않습니다.</translation>
</message>
<message>
<source>&lt;p align=&quot;center&quot;>&lt;b>%1 %2&lt;/b>&lt;/p>&lt;p align=&quot;center&quot;>%3&lt;br>%4 %5&lt;br>%6&lt;/p></source>
<translation>&lt;p 배열=&quot;중앙&quot;>&lt;b>%1 %2&lt;/b>&lt;/p>&lt;p 배열=&quot;중앙&quot;>%3&lt;br>%4 %5&lt;br>%6&lt;/p></translation>
</message>
<message>
<source>Scribus Version</source>
<translation>Scribus 버전</translation>
</message>
<message>
<source>Check for Updates</source>
<translation>업데이트 체크</translation>
</message>
<message>
<source>Abort Update Check</source>
<translation>뎁데이트 체크 취소</translation>
</message>
<message>
<source>Developer Blog</source>
<translation>개발자 블로그</translation>
</message>
<message>
<source>&amp;Licence</source>
<translation>허가권(&amp;L)</translation>
</message>
<message>
<source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
<translation>허가권 파일을 열수 없음. 허가권 정보를 위하여 설치 폴더 또는 Scribus 웹사이트를 체크하시오.</translation>
</message>
</context>
<context>
<name>AboutPlugins</name>
<message>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: 플러그인에 대하여</translation>
</message>
</context>
<context>
<name>AboutPluginsBase</name>
<message>
<source>Scribus: About Plug-ins</source>
<translation>Scribus: 플러그인에 대하여</translation>
</message>
<message>
<source>File Name:</source>
<translation>파일명:</translation>
</message>
<message>
<source>Version:</source>
<translation>버전:</translation>
</message>
<message>
<source>Enabled:</source>
<translation>가능:</translation>
</message>
<message>
<source>Release Date:</source>
<translation>공개 날짜:</translation>
</message>
<message>
<source>Copyright:</source>
<translation>저작권:</translation>
</message>
<message>
<source>Author(s):</source>
<translation>저작자:</translation>
</message>
<message>
<source>Description:</source>
<translation>설명:</translation>
</message>
<message>
<source>License:</source>
<translation>허가권:</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
</context>
<context>
<name>ActionManager</name>
<message>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<source>&amp;Open...</source>
<translation>열기(&amp;O)...</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>&amp;Save</source>
<translation>저장(&amp;S)</translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation>다른 이름으로(&amp;A)...</translation>
</message>
<message>
<source>Re&amp;vert to Saved</source>
<translation>이전 저장 파일로 복원(&amp;V)</translation>
</message>
<message>
<source>Collect for O&amp;utput...</source>
<translation>저장 폴더 지정(&amp;U)...</translation>
</message>
<message>
<source>Get Text...</source>
<translation>텍스트 파일 얻기...</translation>
</message>
<message>
<source>Append &amp;Text...</source>
<translation>텍스트 추가하기(&amp;T)...</translation>
</message>
<message>
<source>Get Image...</source>
<translation>이미지 얻기...</translation>
</message>
<message>
<source>Save &amp;Text...</source>
<translation>텍스트 저장(&amp;T)...</translation>
</message>
<message>
<source>Save Page as &amp;EPS...</source>
<translation>EPS 저장(&amp;E)...</translation>
</message>
<message>
<source>Save as P&amp;DF...</source>
<translation>PDF 저장(&amp;D)...</translation>
</message>
<message>
<source>Document &amp;Setup...</source>
<translation>문서 설정(&amp;S)...</translation>
</message>
<message>
<source>&amp;Print...</source>
<translation>인쇄(&amp;P)...</translation>
</message>
<message>
<source>Print Previe&amp;w</source>
<translation>인쇄 미리보기(&amp;W)</translation>
</message>
<message>
<source>&amp;Quit</source>
<translation>종료(&amp;Q)</translation>
</message>
<message>
<source>&amp;Undo</source>
<translation>이전작업(&amp;U)</translation>
</message>
<message>
<source>&amp;Redo</source>
<translation>재실행(&amp;R)</translation>
</message>
<message>
<source>&amp;Item Action Mode</source>
<translation>객체 실행 모드(&amp;I)</translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation>잘라내기(&amp;T)</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>복사(&amp;C)</translation>
</message>
<message>
<source>&amp;Paste</source>
<translation>붙여넣기(&amp;P)</translation>
</message>
<message>
<source>C&amp;lear Contents</source>
<translation>내용 삭제(&amp;L)</translation>
</message>
<message>
<source>Select &amp;All</source>
<translation>전체 선택(&amp;A)</translation>
</message>
<message>
<source>&amp;Deselect All</source>
<translation>전체 선택 취소(&amp;D)</translation>
</message>
<message>
<source>&amp;Search/Replace...</source>
<translation>찾기/치환(&amp;S)...</translation>
</message>
<message>
<source>Edit Image...</source>
<translation>이미지 편집...</translation>
</message>
<message>
<source>C&amp;olors...</source>
<translation>색상(&amp;O)...</translation>
</message>
<message>
<source>&amp;Paragraph Styles...</source>
<translation>문단 스타일(&amp;P)...</translation>
</message>
<message>
<source>&amp;Line Styles...</source>
<translation>선 스타일(&amp;L)...</translation>
</message>
<message>
<source>&amp;Master Pages...</source>
<translation>마스터 페이지(&amp;M)...</translation>
</message>
<message>
<source>&amp;JavaScripts...</source>
<translation>자바스크립트(&amp;J)...</translation>
</message>
<message>
<source>P&amp;references...</source>
<translation>기본 설정(&amp;R)...</translation>
</message>
<message>
<source>%1 pt</source>
<translation>%1 포인트</translation>
</message>
<message>
<source>&amp;Other...</source>
<translation>기타(&amp;O)...</translation>
</message>
<message>
<source>&amp;Left</source>
<translation>왼쪽(&amp;L)</translation>
</message>
<message>
<source>&amp;Center</source>
<translation>중앙(&amp;C)</translation>
</message>
<message>
<source>&amp;Right</source>
<translation>오른쪽(&amp;R)</translation>
</message>
<message>
<source>&amp;Block</source>
<translation>블록(&amp;B)</translation>
</message>
<message>
<source>&amp;Forced</source>
<translation>강제(&amp;F)</translation>
</message>
<message>
<source>&amp;%1 %</source>
<translation>&amp;%1 %</translation>
</message>
<message>
<source>&amp;Normal</source>
<translation>보통(&amp;N)</translation>
</message>
<message>
<source>&amp;Underline</source>
<translation>밑줄(&amp;U)</translation>
</message>
<message>
<source>Underline &amp;Words</source>
<translation>밑줄 단어(&amp;W)</translation>
</message>
<message>
<source>&amp;Strike Through</source>
<translation>취소선(&amp;S)</translation>
</message>
<message>
<source>&amp;All Caps</source>
<translation>대문자(&amp;A)</translation>
</message>
<message>
<source>Small &amp;Caps</source>
<translation>소문자(&amp;C)</translation>
</message>
<message>
<source>Su&amp;perscript</source>
<translation>윗첨자(&amp;P)</translation>
</message>
<message>
<source>Su&amp;bscript</source>
<translation>아래첨자(&amp;B)</translation>
</message>
<message>
<source>&amp;Outline</source>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<source>S&amp;hadow</source>
<translation>음영(&amp;H)</translation>
</message>
<message>
<source>&amp;Image Effects</source>
<translation>이미지 효과(&amp;I)</translation>
</message>
<message>
<source>&amp;Tabulators...</source>
<translation>탭키 설정(&amp;T)...</translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation>복제(&amp;U)</translation>
</message>
<message>
<source>&amp;Multiple Duplicate</source>
<translation>다수 복제(&amp;M)</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>&amp;Group</source>
<translation>그룹(&amp;G)</translation>
</message>
<message>
<source>&amp;Ungroup</source>
<translation>그룹해제(&amp;U)</translation>
</message>
<message>
<source>Is &amp;Locked</source>
<translation>잠금(&amp;L)</translation>
</message>
<message>
<source>Si&amp;ze is Locked</source>
<translation>크기 잠금(&amp;Z)</translation>
</message>
<message>
<source>Lower to &amp;Bottom</source>
<translation>아래로 이동(&amp;B)</translation>
</message>
<message>
<source>Raise to &amp;Top</source>
<translation>위로 이동(&amp;T)</translation>
</message>
<message>
<source>&amp;Lower</source>
<translation>내리기(&amp;L)</translation>
</message>
<message>
<source>&amp;Raise</source>
<translation>올리기(&amp;R)</translation>
</message>
<message>
<source>Send to S&amp;crapbook</source>
<translation>스크랩북으로 보내기(&amp;C)</translation>
</message>
<message>
<source>&amp;Attributes...</source>
<translation>속성(&amp;A)...</translation>
</message>
<message>
<source>More Info...</source>
<translation>자세한 정보...</translation>
</message>
<message>
<source>I&amp;mage Visible</source>
<translation>이미지 보기(&amp;M)</translation>
</message>
<message>
<source>&amp;Update Image</source>
<translation>이미지 업데이트(&amp;U)</translation>
</message>
<message>
<source>Adjust Frame to Image</source>
<translation>프레임을 이미지에 맞추기</translation>
</message>
<message>
<source>Extended Image Properties</source>
<translation>확장 이미지 속성</translation>
</message>
<message>
<source>&amp;Low Resolution</source>
<translation>저 해상도(&amp;L)</translation>
</message>
<message>
<source>&amp;Normal Resolution</source>
<translation>일반 해상도(&amp;N)</translation>
</message>
<message>
<source>&amp;Full Resolution</source>
<translation>최대 해상도(&amp;F)</translation>
</message>
<message>
<source>Is PDF &amp;Bookmark</source>
<translation>PDF 북마크(&amp;B)</translation>
</message>
<message>
<source>Is PDF A&amp;nnotation</source>
<translation>PDF 주석(&amp;N)</translation>
</message>
<message>
<source>Annotation P&amp;roperties</source>
<translation>주석 속성(&amp;R)</translation>
</message>
<message>
<source>Field P&amp;roperties</source>
<translation>필드 속성(&amp;R)</translation>
</message>
<message>
<source>&amp;Edit Shape...</source>
<translation>도형 편집(&amp;E)...</translation>
</message>
<message>
<source>&amp;Attach Text to Path</source>
<translation>텍스트를 경로에 붙임(&amp;A)</translation>
</message>
<message>
<source>&amp;Detach Text from Path</source>
<translation>경로에서 텍스트를 분리함(&amp;D)</translation>
</message>
<message>
<source>&amp;Combine Polygons</source>
<translation>다각형 결합(&amp;C)</translation>
</message>
<message>
<source>Split &amp;Polygons</source>
<translation>다각형 분리(&amp;P)</translation>
</message>
<message>
<source>&amp;Bezier Curve</source>
<translation>베지어 곡선(&amp;B)</translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation>이미지 프레임(&amp;I)</translation>
</message>
<message>
<source>&amp;Outlines</source>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<source>&amp;Polygon</source>
<translation>다각형(&amp;P)</translation>
</message>
<message>
<source>&amp;Text Frame</source>
<translation>텍스트 프레임(&amp;T)</translation>
</message>
<message>
<source>&amp;Glyph...</source>
<translation>사용자 문자표(&amp;G)...</translation>
</message>
<message>
<source>Sample Text</source>
<translation>예제 텍스트</translation>
</message>
<message>
<source>&amp;Insert...</source>
<translation>삽입(&amp;I)...</translation>
</message>
<message>
<source>Im&amp;port...</source>
<translation>읽어오기(&amp;P)...</translation>
</message>
<message>
<source>&amp;Delete...</source>
<translation>삭제(&amp;D)...</translation>
</message>
<message>
<source>&amp;Copy...</source>
<translation>복사(&amp;C)...</translation>
</message>
<message>
<source>&amp;Move...</source>
<translation>이동(&amp;M)...</translation>
</message>
<message>
<source>&amp;Apply Master Page...</source>
<translation>마스터 페이지 적용(&amp;A)...</translation>
</message>
<message>
<source>Convert to Master Page...</source>
<translation>마스터 페이지 변환...</translation>
</message>
<message>
<source>Manage &amp;Guides...</source>
<translation>안내선 설정(&amp;G)...</translation>
</message>
<message>
<source>Manage Page Properties...</source>
<translation>페이지 속성 설정...</translation>
</message>
<message>
<source>&amp;Fit in window</source>
<translation>창 조정(&amp;F)</translation>
</message>
<message>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<source>&amp;Thumbnails</source>
<translation>썸네일(&amp;T)</translation>
</message>
<message>
<source>Show &amp;Margins</source>
<translation>여백 보이기(&amp;M)</translation>
</message>
<message>
<source>Show &amp;Frames</source>
<translation>프레임 보이기(&amp;F)</translation>
</message>
<message>
<source>Show &amp;Images</source>
<translation>이미지 보이기(&amp;I)</translation>
</message>
<message>
<source>Show &amp;Grid</source>
<translation>격자 보이기(&amp;G)</translation>
</message>
<message>
<source>Show G&amp;uides</source>
<translation>안내선 보이기(&amp;U)</translation>
</message>
<message>
<source>Show &amp;Baseline Grid</source>
<translation>기준선 격자 보이기(&amp;B)</translation>
</message>
<message>
<source>Show &amp;Text Chain</source>
<translation>텍스트 체인 보이기(&amp;T)</translation>
</message>
<message>
<source>Show Control Characters</source>
<translation>제어문자 보이기</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1399"/>
<source>Rulers relative to Page</source>
<translation>페이지 관련 눈금자</translation>
</message>
<message>
<source>Sn&amp;ap to Grid</source>
<translation>격자에 붙이기(&amp;A)</translation>
</message>
<message>
<source>Sna&amp;p to Guides</source>
<translation>안내선에 붙이기(&amp;P)</translation>
</message>
<message>
<source>&amp;Properties</source>
<translation>속성 편집(&amp;P)</translation>
</message>
<message>
<source>&amp;Scrapbook</source>
<translation>스크랩북(&amp;S)</translation>
</message>
<message>
<source>&amp;Layers</source>
<translation>레이어(&amp;L)</translation>
</message>
<message>
<source>&amp;Arrange Pages</source>
<translation>페이지 배열(&amp;A)</translation>
</message>
<message>
<source>&amp;Bookmarks</source>
<translation>북마크(&amp;B)</translation>
</message>
<message>
<source>&amp;Measurements</source>
<translation>측정(&amp;M)</translation>
</message>
<message>
<source>Action &amp;History</source>
<translation>작업 내역(&amp;H)</translation>
</message>
<message>
<source>Preflight &amp;Verifier</source>
<translation>문서 검증(&amp;V)</translation>
</message>
<message>
<source>&amp;Align and Distribute</source>
<translation>정렬/배치(&amp;A)</translation>
</message>
<message>
<source>&amp;Tools</source>
<translation>도구(&amp;T)</translation>
</message>
<message>
<source>P&amp;DF Tools</source>
<translation>PDF 도구(&amp;D)</translation>
</message>
<message>
<source>Select Item</source>
<translation>객체 선택</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1351"/>
<source>T&amp;able</source>
<translation>표(&amp;A)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1352"/>
<source>&amp;Shape</source>
<translation>도형(&amp;S)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1354"/>
<source>&amp;Line</source>
<translation>선(&amp;L)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1356"/>
<source>&amp;Freehand Line</source>
<translation>자유로운 선(&amp;F)</translation>
</message>
<message>
<source>Rotate Item</source>
<translation>객체 회전</translation>
</message>
<message>
<source>Zoom in or out</source>
<translation>돋보기</translation>
</message>
<message>
<source>Zoom in</source>
<translation>확대</translation>
</message>
<message>
<source>Zoom out</source>
<translation>축소</translation>
</message>
<message>
<source>Edit Contents of Frame</source>
<translation>프레임 내용 편집</translation>
</message>
<message>
<source>Edit Text...</source>
<translation>텍스트 편집...</translation>
</message>
<message>
<source>Link Text Frames</source>
<translation>텍스트 프레임 링크</translation>
</message>
<message>
<source>Unlink Text Frames</source>
<translation>텍스트 프레임 링크 해제</translation>
</message>
<message>
<source>&amp;Eye Dropper</source>
<translation>색상 추출기(&amp;E)</translation>
</message>
<message>
<source>Copy Item Properties</source>
<translation>객체 속성 복사</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1368"/>
<source>Edit the text with the Story Editor</source>
<translation>스토리 편집기로 텍스트 편집</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1370"/>
<source>Insert Text Frame</source>
<translation>텍스트 프레임 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1371"/>
<source>Insert Image Frame</source>
<translation>이미지 프레임 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1372"/>
<source>Insert Table</source>
<translation>표 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1373"/>
<source>Insert Shape</source>
<translation>도형 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1374"/>
<source>Insert Polygon</source>
<translation>다각형 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1375"/>
<source>Insert Line</source>
<translation>선 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1376"/>
<source>Insert Bezier Curve</source>
<translation>베지어 곡선 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1377"/>
<source>Insert Freehand Line</source>
<translation>자유로운 선 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1412"/>
<source>&amp;Manage Pictures</source>
<translation>이미지 관리(&amp;M)</translation>
</message>
<message>
<source>&amp;Hyphenate Text</source>
<translation>하이픈 연결(&amp;H)</translation>
</message>
<message>
<source>Dehyphenate Text</source>
<translation>하이픈 연결 해제</translation>
</message>
<message>
<source>&amp;Generate Table Of Contents</source>
<translation>목차 생성(&amp;G)</translation>
</message>
<message>
<source>&amp;Cascade</source>
<translation>계단식(&amp;C)</translation>
</message>
<message>
<source>&amp;Tile</source>
<translation>타일식(&amp;T)</translation>
</message>
<message>
<source>&amp;About Scribus</source>
<translation>Scribus에 대하여(&amp;A)</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1423"/>
<source>&amp;About Plug-ins</source>
<translation>플러그인에 대하여(&amp;A)</translation>
</message>
<message>
<source>About &amp;Qt</source>
<translation>Qt에 대하여(&amp;Q)</translation>
</message>
<message>
<source>Toolti&amp;ps</source>
<translation>도구설명(&amp;P)</translation>
</message>
<message>
<source>Scribus &amp;Manual...</source>
<translation>Scribus 메뉴얼(&amp;M)...</translation>
</message>
<message>
<source>Smart &amp;Hyphen</source>
<translation>하이픈 능동적용(&amp;H)</translation>
</message>
<message>
<source>Non Breaking Dash</source>
<translation>개행없음 대시</translation>
</message>
<message>
<source>Non Breaking &amp;Space</source>
<translation>개행없음 공백(&amp;S)</translation>
</message>
<message>
<source>Page &amp;Number</source>
<translation>페이지 번호(&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>New Line</source>
<translation>새로운 줄</translation>
</message>
<message>
<source>Frame Break</source>
<translation>프레임 개행</translation>
</message>
<message>
<source>Column Break</source>
<translation>열 개행</translation>
</message>
<message>
<source>Copyright</source>
<translation>저작권</translation>
</message>
<message>
<source>Registered Trademark</source>
<translation>등록상표(R)</translation>
</message>
<message>
<source>Trademark</source>
<translation>등록상표(T)</translation>
</message>
<message>
<source>Bullet</source>
<translation>작은 점</translation>
</message>
<message>
<source>Em Dash</source>
<translation>Em 대시</translation>
</message>
<message>
<source>En Dash</source>
<translation>En 대시</translation>
</message>
<message>
<source>Figure Dash</source>
<translation>숫자 대시</translation>
</message>
<message>
<source>Quotation Dash</source>
<translation>인용 대시</translation>
</message>
<message>
<source>Apostrophe</source>
<translation>어포스트로피</translation>
</message>
<message>
<source>Toggle Palettes</source>
<translation>팔레트 전환</translation>
</message>
<message>
<source>Toggle Guides</source>
<translation>안내선 전환</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<source>More Info...</source>
<translation>자세한 정보...</translation>
</message>
<message>
<source>Copy Contents</source>
<translation>내용 복사</translation>
</message>
<message>
<source>Paste Contents</source>
<translation>내용 붙여넣기</translation>
</message>
<message>
<source>Paste (&amp;Absolute)</source>
<translation>붙여넣기 (절대값)(&amp;A)</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
</message>
<message>
<source>S&amp;tyles...</source>
<translation>스타일(&amp;T)...</translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<source>&amp;Printing Enabled</source>
<translation>인쇄 가능(&amp;P)</translation>
</message>
<message>
<source>&amp;Flip Horizontally</source>
<translation>수평 뒤집기(&amp;F)</translation>
</message>
<message>
<source>&amp;Flip Vertically</source>
<translation>수직 뒤집기(&amp;F)</translation>
</message>
<message>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>윤곽선(&amp;O)</translation>
</message>
<message>
<source>Show Rulers</source>
<translation>눈금자 보기</translation>
</message>
<message>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>문서 전체 윤곽(&amp;O)</translation>
</message>
<message>
<source>Insert PDF Push Button</source>
<translation>PDF 누름 버튼 삽입</translation>
</message>
<message>
<source>Insert PDF Text Field</source>
<translation>PDF 텍스트 필드 삽입</translation>
</message>
<message>
<source>Insert PDF Check Box</source>
<translation>PDF 체크 상자 삽입</translation>
</message>
<message>
<source>Insert PDF Combo Box</source>
<translation>PDF 콤보 상자 삽입</translation>
</message>
<message>
<source>Insert PDF List Box</source>
<translation>PDF 목록 상자 삽입</translation>
</message>
<message>
<source>Insert Text Annotation</source>
<translation>텍스트 주석 삽입</translation>
</message>
<message>
<source>Insert Link Annotation</source>
<translation>링크 주석 삽입</translation>
</message>
<message>
<source>New Line</source>
<translation>새로운 줄</translation>
</message>
<message>
<source>Solidus</source>
<translation>사선</translation>
</message>
<message>
<source>Middle Dot</source>
<translation>중간 점</translation>
</message>
<message>
<source>En Space</source>
<translation>En 공백</translation>
</message>
<message>
<source>Em Space</source>
<translation>Em 공백</translation>
</message>
<message>
<source>Thin Space</source>
<translation>좁은 공백</translation>
</message>
<message>
<source>Thick Space</source>
<translation>두터운 공백</translation>
</message>
<message>
<source>Mid Space</source>
<translation>중간 공백</translation>
</message>
<message>
<source>Hair Space</source>
<translation>헤어 공백</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1461"/>
<source>Insert Smart Hyphen</source>
<translation>능동 적용 하이픈 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1462"/>
<source>Insert Non Breaking Dash</source>
<translation>개행없음 대시 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1463"/>
<source>Insert Non Breaking Space</source>
<translation>개행없음 공백 삽입</translation>
</message>
<message>
<location filename="../actionmanager.cpp" line="1464"/>
<source>Insert Page Number</source>
<translation>페이지 번호 삽입</translation>
</message>
<message>
<source>ff</source>
<translation>ff</translation>
</message>
<message>
<source>fi</source>
<translation>fi</translation>
</message>
<message>
<source>fl</source>
<translation>fl</translation>
</message>
<message>
<source>ffi</source>
<translation>ffi</translation>
</message>
<message>
<source>ffl</source>
<translation>ffl</translation>
</message>
<message>
<source>ft</source>
<translation>ft</translation>
</message>
<message>
<source>st</source>
<translation>st</translation>
</message>
<message>
<source>Save as &amp;EPS...</source>
<translation>EPS 저장(&amp;E)...</translation>
</message>
<message>
<source>Show Text Frame Columns</source>
<translation>텍스트 프레임 열 보이기</translation>
</message>
<message>
<source>&amp;Frame...</source>
<translation>프레임(&amp;F)...</translation>
</message>
<message>
<source>Preview Mode</source>
<translation>미리보기 모드</translation>
</message>
<message>
<source>Show Layer Indicators</source>
<translation>레이어 지시자 보기</translation>
</message>
<message>
<source>Patterns...</source>
<translation>색상표...</translation>
</message>
<message>
<source>Send to Patterns</source>
<translation>색상표에 저장</translation>
</message>
<message>
<source>Sticky Tools</source>
<translation>스티키 도구</translation>
</message>
<message>
<source>&amp;Fit to Height</source>
<translation>높이에 맞게(&amp;F)</translation>
</message>
<message>
<source>Fit to Width</source>
<translation>너비에 맞게</translation>
</message>
<message>
<source>Show Bleeds</source>
<translation>물림재단 보이기</translation>
</message>
<message>
<source>&amp;Zero Width Space</source>
<translation>0 너비 공백(&amp;Z)</translation>
</message>
<message>
<source>Zero Width NB Space</source>
<translation>0 너비 NB 공백</translation>
</message>
<message>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>' 0x0027삽입</translation>
</message>
<message>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>" 0x0022삽입</translation>
</message>
<message>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>‘ 0x2018삽입</translation>
</message>
<message>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>’ 0x2019삽입</translation>
</message>
<message>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>“ 0x201C삽입</translation>
</message>
<message>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>” 0x201D삽입</translation>
</message>
<message>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>‛ 0x201B삽입</translation>
</message>
<message>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>`` 0x201F삽입</translation>
</message>
<message>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>‹ 0x2039삽입</translation>
</message>
<message>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>› 0x203A삽입</translation>
</message>
<message>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>‹‹ 0x00AB삽입</translation>
</message>
<message>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>›› 0x00BB삽입</translation>
</message>
<message>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>‚ 0x201A삽입</translation>
</message>
<message>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>„ 0x201E삽입</translation>
</message>
<message>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>왼쪽 따옴표</translation>
</message>
<message>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>오른쪽 따옴표</translation>
</message>
<message>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>왼쪽 이중 따옴표</translation>
</message>
<message>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>오른쪽 이중 따옴표</translation>
</message>
<message>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<source>Insert &amp;Text Frame</source>
<translation>텍스트 프레임 삽입(&amp;T)</translation>
</message>
<message>
<source>Insert &amp;Image Frame</source>
<translation>이미지 프레임 삽입(&amp;I)</translation>
</message>
<message>
<source>Insert T&amp;able</source>
<translation>표 삽입(&amp;A)</translation>
</message>
<message>
<source>Insert &amp;Shape</source>
<translation>도형 삽입(&amp;S)</translation>
</message>
<message>
<source>Insert &amp;Polygon</source>
<translation>다각형 삽입(&amp;P)</translation>
</message>
<message>
<source>Insert &amp;Line</source>
<translation>선 삽입(&amp;L)</translation>
</message>
<message>
<source>Insert &amp;Bezier Curve</source>
<translation>베지어선 삽입(&amp;B)</translation>
</message>
<message>
<source>Insert &amp;Freehand Line</source>
<translation>자유로운 선 삽입(&amp;F)</translation>
</message>
<message>
<source>Scribus Homepage</source>
<translation>Scribus 홈페이지</translation>
</message>
<message>
<source>Scribus Online Documentation</source>
<translation>Scribus 온라인 문서</translation>
</message>
<message>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<source>Getting Started with Scribus</source>
<translation>Scribus 시작하기</translation>
</message>
<message>
<source>Show Context Menu</source>
<translation>문맥 메뉴 보이기</translation>
</message>
<message>
<source>&amp;Manage Images</source>
<translation>이미지 관리(&amp;M)</translation>
</message>
<message>
<source>&amp;About Plugins</source>
<translation>플러그인에 대하여(&amp;A)</translation>
</message>
<message>
<source>Insert Unicode Character Begin Sequence</source>
<translation>Unicode문자 시작 순서 삽입</translation>
</message>
<message>
<source>Get Vector File...</source>
<translation>벡터 파일 얻기...</translation>
</message>
<message>
<source>Advanced Select All...</source>
<translation>고급 객체 선택...</translation>
</message>
<message>
<source>Edit Source...</source>
<translation>소스 편집...</translation>
</message>
<message>
<source>Replace Colors...</source>
<translation>색상 치환...</translation>
</message>
<message>
<source>Rulers Relative to Page</source>
<translation>페이지 관련 눈금자</translation>
</message>
<message>
<source>Insert &amp;Render Frame</source>
<translation>렌더 프레임 삽입(&amp;R)</translation>
</message>
<message>
<source>Check for Updates</source>
<translation>업데이트 체크</translation>
</message>
<message>
<source>Number of Pages</source>
<translation>페이지 총수</translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
<message>
<source>CMS Settings</source>
<translation>CMS 설정</translation>
</message>
</context>
<context>
<name>AlignDistribute</name>
<message>
<source>Align</source>
<translation>정렬</translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation>선택된 안내선(&amp;S):</translation>
</message>
<message>
<source>&amp;Relative To:</source>
<translation>관계(&amp;R):</translation>
</message>
<message>
<source>...</source>
<translation>...</translation>
</message>
<message>
<source>Distribute</source>
<translation>배치</translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation>거리(&amp;D):</translation>
</message>
</context>
<context>
<name>AlignDistributePalette</name>
<message>
<source>Align and Distribute</source>
<translation>정렬 및 배치</translation>
</message>
<message>
<source>Align</source>
<translation>정렬</translation>
</message>
<message>
<source>&amp;Relative to:</source>
<translation>기준(&amp;R):</translation>
</message>
<message>
<source>First Selected</source>
<translation>처음 선택된 것</translation>
</message>
<message>
<source>Last Selected</source>
<translation>마지막 선택된 것</translation>
</message>
<message>
<source>Page</source>
<translation>페이지</translation>
</message>
<message>
<source>Margins</source>
<translation>여백</translation>
</message>
<message>
<source>Guide</source>
<translation>안내선</translation>
</message>
<message>
<source>Selection</source>
<translation>선택</translation>
</message>
<message>
<source>Align right sides of objects to left side of anchor</source>
<translation>객체 오른쪽에서 고정점 왼쪽면으로 정렬</translation>
</message>
<message>
<source>Align left sides of objects to right side of anchor</source>
<translation>객체 왼쪽에서 고정점 오른쪽면으로 정렬</translation>
</message>
<message>
<source>Align bottoms</source>
<translation>아래 정렬</translation>
</message>
<message>
<source>Align right sides</source>
<translation>오른쪽 정렬</translation>
</message>
<message>
<source>Align tops of objects to bottom of anchor</source>
<translation>객체 위에서 고정점 아래로 정렬</translation>
</message>
<message>
<source>Center on vertical axis</source>
<translation>수직축 중앙</translation>
</message>
<message>
<source>Align left sides</source>
<translation>왼쪽 면 정렬</translation>
</message>
<message>
<source>Center on horizontal axis</source>
<translation>수평 축 중앙</translation>
</message>
<message>
<source>Align bottoms of objects to top of anchor</source>
<translation>객체 아래에서 고정점 위로 정렬</translation>
</message>
<message>
<source>Align tops</source>
<translation>위로 정렬</translation>
</message>
<message>
<source>&amp;Selected Guide:</source>
<translation>선택된 안내선(&amp;S):</translation>
</message>
<message>
<source>Distribute</source>
<translation>배치</translation>
</message>
<message>
<source>Make horizontal gaps between objects equal</source>
<translation>객체 사이 수평 간격을 동일하게</translation>
</message>
<message>
<source>Make horizontal gaps between objects equal to the value specified</source>
<translation>객체 사이 수평 간격을 정한 값으로 동일하게</translation>
</message>
<message>
<source>Distribute right sides equidistantly</source>
<translation>오른쪽 면에 등거리 배치</translation>
</message>
<message>
<source>Distribute bottoms equidistantly</source>
<translation>아래에 등거리 배치</translation>
</message>
<message>
<source>Distribute centers equidistantly horizontally</source>
<translation>수평으로 중앙 등거리 배치</translation>
</message>
<message>
<source>Make vertical gaps between objects equal</source>
<translation>객체 사이 수직 간격을 동일하게</translation>
</message>
<message>
<source>Make vertical gaps between objects equal to the value specified</source>
<translation>객체 사이 수직 간격을 정한 값으로 동일하게</translation>
</message>
<message>
<source>Distribute left sides equidistantly</source>
<translation>왼쪽 면에 등거리 배치</translation>
</message>
<message>
<source>Distribute centers equidistantly vertically</source>
<translation>수직으로 중앙 등거리 배치</translation>
</message>
<message>
<source>Distribute tops equidistantly</source>
<translation>위에서 등거리 배치</translation>
</message>
<message>
<source>&amp;Distance:</source>
<translation>거리(&amp;D):</translation>
</message>
<message>
<source>Distribute the items with the distance specified</source>
<translation>객체를 지정거리로 배치</translation>
</message>
<message>
<source>None Selected</source>
<translation>없음</translation>
</message>
<message>
<source>Warning</source>
<translation>오류</translation>
</message>
<message>
<source>Some objects are locked.</source>
<translation>몇 객체가 잠금.</translation>
</message>
<message>
<source>&amp;Unlock All</source>
<translation>전체 잠금 해제(&amp;U)</translation>
</message>
<message>
<source>Y: %1%2</source>
<translation>Y: %1%2</translation>
</message>
<message>
<source>X: %1%2</source>
<translation>X: %1%2</translation>
</message>
<message>
<source>Align right sides of items to left side of anchor</source>
<translation>객체의 오른쪽면을 고정점의 왼쪽면으로 정렬</translation>
</message>
<message>
<source>Align left sides of items to right side of anchor</source>
<translation>객체 왼쪽면을 고정점의 오른쪽으로 정렬</translation>
</message>
<message>
<source>Align tops of items to bottom of anchor</source>
<translation>객체의 위를 고정점 아래에 정렬</translation>
</message>
<message>
<source>Align bottoms of items to top of anchor</source>
<translation>객체 아래를 고정점 상부에 정렬</translation>
</message>
<message>
<source>Make horizontal gaps between items equal</source>
<translation>객체 사이 수평 간격을 주어진 값과 같게 만듦</translation>
</message>
<message>
<source>Make horizontal gaps between items equal to the value specified</source>
<translation>객체 사이 수평 간격을 지정 값과 같게 만듦</translation>
</message>
<message>
<source>Make vertical gaps between items equal</source>
<translation>객체 사이 수직 간격을 지정 값으로 만듦</translation>
</message>
<message>
<source>Make vertical gaps between items equal to the value specified</source>
<translation>객체 사이 수직 간격을 정해진 값으로 만듦</translation>
</message>
<message>
<source>Make horizontal gaps between items and sides of page equal</source>
<translation>객체과 페이지면 사이에 수평 간격이 같게</translation>
</message>
<message>
<source>Make vertical gaps between items and the top and bottom of page margins equal</source>
<translation>객체과 페이지의 아래 윗쪽 사이 수직 간격이 같게</translation>
</message>
<message>
<source>Make horizontal gaps between items and sides of page margins equal</source>
<translation>객체와 페이지면의 간격사이의 수평여백이 같게</translation>
</message>
<message>
<source>Make vertical gaps between items and the top and bottom of page equal</source>
<translation>객체와 페이지의 아래윗쪽 사이 수직 간격이 같게</translation>
</message>
<message>
<source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
<translation>&lt;qt&gt;관련 정렬:&lt;ul&gt;&lt;li&gt;처음 선택된 객체&lt;/li&gt;&lt;li&gt;둘째 선택된 객체&lt;/li&gt;&lt;li&gt;현재 페이지&lt;/li&gt;&lt;li&gt;현재 페이지의 여백&lt;/li&gt;&lt;li&gt;안내선&lt;/li&gt;&lt;li&gt;선택&lt;/ul&gt;&lt;/qt&gt;</translation>
</message>
<message>
<source>The location of the selected guide to align to</source>
<translation>정렬하기 위한 선택 안내선의 위치</translation>
</message>
</context>
<context>
<name>AlignSelect</name>
<message>
<source>Align Text Left</source>
<translation>텍스트 왼쪽 정렬</translation>
</message>
<message>
<source>Align Text Right</source>
<translation>텍스트 오른쪽 정렬</translation>
</message>
<message>
<source>Align Text Center</source>
<translation>텍스트 중앙 정렬</translation>
</message>
<message>
<source>Align Text Justified</source>
<translation>텍스트 양쪽 맞춤</translation>
</message>
<message>
<source>Align Text Forced Justified</source>
<translation>텍스트 강제 양쪽 맞춤</translation>
</message>
</context>
<context>
<name>Annot</name>
<message>
<source>Field Properties</source>
<translation>필드 속성</translation>
</message>
<message>
<source>Type:</source>
<translation>형태:</translation>
</message>
<message>
<source>Button</source>
<translation>단추</translation>
</message>
<message>
<source>Text Field</source>
<translation>텍스트 필드</translation>
</message>
<message>
<source>Check Box</source>
<translation>체크 상자</translation>
</message>
<message>
<source>Combo Box</source>
<translation>콤보 상자</translation>
</message>
<message>
<source>List Box</source>
<translation>목록 상자</translation>
</message>
<message>
<source>Properties</source>
<translation>속성</translation>
</message>
<message>
<source>Name:</source>
<translation>이름:</translation>
</message>
<message>
<source>Text</source>
<translation>텍스트</translation>
</message>
<message>
<source>Font for use with PDF 1.3:</source>
<translation>PDF 1.3 사용하기 위한 글꼴:</translation>
</message>
<message>
<source>Border</source>
<translation>경계</translation>
</message>
<message>
<source>Color:</source>
<translation>색상:</translation>
</message>
<message>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<source>Width:</source>
<translation>너비:</translation>
</message>
<message>
<source>Thin</source>
<translation>좁음</translation>
</message>
<message>
<source>Normal</source>
<translation>보통</translation>
</message>
<message>
<source>Wide</source>
<translation>넓음</translation>
</message>
<message>
<source>Style:</source>
<translation>형태:</translation>
</message>
<message>
<source>Solid</source>
<translation>실선</translation>
</message>
<message>
<source>Dashed</source>
<translation>파선</translation>
</message>
<message>
<source>Underline</source>
<translation>밑줄</translation>
</message>
<message>
<source>Beveled</source>
<translation>빗금</translation>
</message>
<message>
<source>Inset</source>
<translation>삽입</translation>
</message>
<message>
<source>Other</source>
<translation>기타</translation>
</message>
<message>
<source>Read Only</source>
<translation>읽기만</translation>
</message>
<message>
<source>Required</source>
<translation>필수</translation>
</message>
<message>
<source>Visibility:</source>
<translation>가시성:</translation>
</message>
<message>
<source>Visible</source>
<translation>보임</translation>
</message>
<message>
<source>Hidden</source>
<translation>숨김</translation>
</message>
<message>
<source>No Print</source>
<translation>인쇄 안함</translation>
</message>
<message>
<source>No View</source>
<translation>보기 없음</translation>
</message>
<message>
<source>Appearance</source>
<translation>외형</translation>
</message>
<message>
<source>Text for Button Down</source>
<translation>단추 누르기 텍스트</translation>
</message>
<message>
<source>Text for Roll Over</source>
<translation>말아올리기 텍스트</translation>
</message>
<message>
<source>Icons</source>
<translation>아이콘</translation>
</message>
<message>
<source>Use Icons</source>
<translation>아이콘 사용</translation>
</message>
<message>
<source>Remove</source>
<translation>제거</translation>
</message>
<message>
<source>Pressed</source>
<translation>누름</translation>
</message>
<message>
<source>Roll Over</source>
<translation>말아 올리기</translation>
</message>
<message>
<source>Icon Placement...</source>
<translation>아이콘 위치...</translation>
</message>
<message>
<source>Highlight</source>
<translation>강조</translation>
</message>
<message>
<source>Invert</source>
<translation>반전</translation>
</message>
<message>
<source>Outlined</source>
<translation>윤곽선</translation>
</message>
<message>
<source>Push</source>
<translation>밀기</translation>
</message>
<message>
<source>Multi-Line</source>
<translation>다중선</translation>
</message>
<message>
<source>Password</source>
<translation>암호</translation>
</message>
<message>
<source>Characters</source>
<translation>문자</translation>
</message>
<message>
<source>Do Not Scroll</source>
<translation>스크롤 안함</translation>
</message>
<message>
<source>Do Not Spell Check</source>
<translation>맞춤법 체크 안함</translation>
</message>
<message>
<source>Check Style:</source>
<translation>스타일 체크:</translation>
</message>
<message>
<source>Check</source>
<translation>체크</translation>
</message>
<message>
<source>Cross</source>
<translation>십자</translation>
</message>
<message>
<source>Diamond</source>
<translation>다이아몬드</translation>
</message>
<message>
<source>Circle</source>
<translation>원</translation>
</message>
<message>
<source>Star</source>
<translation>별</translation>
</message>
<message>
<source>Square</source>
<translation>사각</translation>
</message>
<message>
<source>Editable</source>
<translation>편집가능</translation>
</message>
<message>
<source>Options</source>
<translation>설정</translation>
</message>
<message>
<source>JavaScript</source>
<translation>자바스크립트</translation>
</message>
<message>
<source>Go To</source>
<translation>이동</translation>
</message>
<message>
<source>Submit Form</source>
<translation>전송 양식</translation>
</message>
<message>
<source>Reset Form</source>
<translation>양식 초기화</translation>
</message>
<message>
<source>Import Data</source>
<translation>자료 들여오기</translation>
</message>
<message>
<source>Event:</source>
<translation>이벤트:</translation>
</message>
<message>
<source>Mouse Up</source>
<translation>마우스 위로</translation>
</message>
<message>
<source>Mouse Down</source>
<translation>마우스 아래로</translation>
</message>
<message>
<source>Mouse Enter</source>
<translation>마우스 엔터</translation>
</message>
<message>
<source>Mouse Exit</source>
<translation>마우스 종료</translation>
</message>
<message>
<source>On Focus</source>
<translation>초점</translation>
</message>
<message>
<source>On Blur</source>
<translation>흐림</translation>
</message>
<message>
<source>Script:</source>
<translation>자바스크립트:</translation>
</message>
<message>
<source>Edit...</source>
<translation>편집...</translation>
</message>
<message>
<source>Submit to URL:</source>
<translation>다음 URL로 전송:</translation>
</message>
<message>
<source>Submit Data as HTML</source>
<translation>자료를 HTML로 보내기</translation>
</message>
<message>
<source>Import Data from:</source>
<translation>자료 들여오기:</translation>
</message>
<message>
<source>Destination</source>
<translation>출력대상</translation>
</message>
<message>
<source>To File:</source>
<translation>파일로:</translation>
</message>
<message>
<source>Change...</source>
<translation>바꾸기...</translation>
</message>
<message>
<source>Page:</source>
<translation>페이지:</translation>
</message>
<message>
<source>X-Pos:</source>
<translation>X 위치:</translation>
</message>
<message>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<source>Y-Pos:</source>
<translation>Y 위치:</translation>
</message>
<message>
<source>Action</source>
<translation>작업</translation>
</message>
<message>
<source>Field is formatted as:</source>
<translation>필드 형식:</translation>
</message>
<message>
<source>Plain</source>
<translation>보통</translation>
</message>
<message>
<source>Number</source>
<translation>숫자</translation>
</message>
<message>
<source>Percentage</source>
<translation>백분율</translation>
</message>
<message>
<source>Date</source>
<translation>날짜</translation>
</message>
<message>
<source>Time</source>
<translation>시간</translation>
</message>
<message>
<source>Custom</source>
<translation>사용자</translation>
</message>
<message>
<source>Number Format</source>
<translation>숫자 형식</translation>
</message>
<message>
<source>Decimals:</source>
<translation>십진법:</translation>
</message>
<message>
<source>Use Currency Symbol</source>
<translation>통화 기호 사용</translation>
</message>
<message>
<source>Prepend Currency Symbol</source>
<translation>통화 기호 이전에 추가</translation>
</message>
<message>
<source>Formatting</source>
<translation>형식</translation>
</message>
<message>
<source>Percent Format</source>
<translation>백분율 형식</translation>
</message>
<message>
<source>Date Format</source>
<translation>날짜 형식</translation>
</message>
<message>
<source>Time Format</source>
<translation>시간 형식</translation>
</message>
<message>
<source>Custom Scripts</source>
<translation>사용자 스크립트</translation>
</message>
<message>
<source>Format:</source>
<translation>형식:</translation>
</message>
<message>
<source>Keystroke:</source>
<translation>키입력:</translation>
</message>
<message>
<source>Format</source>
<translation>형식</translation>
</message>
<message>
<source>Value is not validated</source>
<translation>값이 유효하지 않습니다</translation>
</message>
<message>
<source>Value must be greater than or equal to:</source>
<translation>값이 크거나 같아야 합니다:</translation>
</message>
<message>
<source>and less or equal to:</source>
<translation>값이 적거나 같아야 합니다:</translation>
</message>
<message>
<source>Custom validate script:</source>
<translation>사용자 인증 스크립트:</translation>
</message>
<message>
<source>Validate</source>
<translation>인증</translation>
</message>
<message>
<source>Value is not calculated</source>
<translation>값이 계산되지 않습니다</translation>
</message>
<message>
<source>Value is the</source>
<translation>값</translation>
</message>
<message>
<source>sum</source>
<translation>합계</translation>
</message>
<message>
<source>product</source>
<translation>곱</translation>
</message>
<message>
<source>average</source>
<translation>평균</translation>
</message>
<message>
<source>minimum</source>
<translation>최소</translation>
</message>
<message>
<source>maximum</source>
<translation>최대</translation>
</message>
<message>
<source>of the following fields:</source>
<translation>다음 필드:</translation>
</message>
<message>
<source>Pick...</source>
<translation>추출...</translation>
</message>
<message>
<source>Custom calculation script:</source>
<translation>사용자 계산 스크립트:</translation>
</message>
<message>
<source>Calculate</source>
<translation>계산</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>Flag is ignored for PDF 1.3</source>
<translation>플래그를 PDF 1.3에서 무시합니다</translation>
</message>
<message>
<source>Enter a comma separated list of fields here</source>
<translation>여기에 쉼표로 구분된 필드의 목록을 입력하시오.</translation>
</message>
<message>
<source>You need at least the Icon for Normal to use Icons for Buttons</source>
<translation>버튼에 아이콘을 사용하려면 일반 아이콘이 적어도 필요합니다</translation>
</message>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>Example:</source>
<translation>예제:</translation>
</message>
<message>
<source>Selection Change</source>
<translation>선택 변경</translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDF 파일 (*.pdf);;전체 파일 (*)</translation>
</message>
<message>
<source>None</source>
<comment>highlight</comment>
<translation>강조</translation>
</message>
<message>
<source>Limit of</source>
<translation>제한</translation>
</message>
<message>
<source>Default is Checked</source>
<translation>기본값이 체크됨</translation>
</message>
<message>
<source>None</source>
<comment>action</comment>
<translation>작업</translation>
</message>
<message>
<source>Tooltip:</source>
<translation>도구설명:</translation>
</message>
<message>
<source>Do Not Export Value</source>
<translation>내보내기 값이 없음</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
<translation>이미지 (*.tif *.png *.jpg *.xpm);;포스트스크립트 (*.eps *.epsi);;전체 파일 (*)</translation>
</message>
<message>
<source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
<translation>이미지 (*.tif *.png *.jpg *.xpm);;%1;;전체 파일 (*)</translation>
</message>
<message>
<source>Export absolute Filename</source>
<translation>전체 파일 이름 내보내기</translation>
</message>
</context>
<context>
<name>Annota</name>
<message>
<source>Annotation Properties</source>
<translation>주석 속성</translation>
</message>
<message>
<source>Text</source>
<translation>텍스트</translation>
</message>
<message>
<source>Link</source>
<translation>링크</translation>
</message>
<message>
<source>External Link</source>
<translation>외부 링크</translation>
</message>
<message>
<source>External Web-Link</source>
<translation>외부 웹-링크</translation>
</message>
<message>
<source>&amp;Type:</source>
<translation>형태(&amp;T):</translation>
</message>
<message>
<source>Destination</source>
<translation>출력방향</translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation>변경(&amp;H)...</translation>
</message>
<message>
<source>&amp;Page:</source>
<translation>페이지(&amp;P):</translation>
</message>
<message>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<source>&amp;X-Pos</source>
<translation>&amp;X위치</translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation>&amp;Y위치:</translation>
</message>
<message>
<source>Open</source>
<translation>열기 </translation>
</message>
<message>
<source>%1;;All Files (*)</source>
<translation>%1;;전체 파일 (*)</translation>
</message>
<message>
<source>Export absolute Filename</source>
<translation>전체 파일명 내보내기</translation>
</message>
</context>
<context>
<name>ApplyMasterPageDialog</name>
<message>
<source>Apply Master Page</source>
<translation>마스터 페이지 적용</translation>
</message>
<message>
<source>&amp;Master Page:</source>
<translation>마스터 페이지(&amp;M):</translation>
</message>
<message>
<source>Apply To</source>
<translation>적용 대상</translation>
</message>
<message>
<source>Current &amp;page</source>
<translation>현재 페이지(&amp;P)</translation>
</message>
<message>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<source>&amp;Even pages</source>
<translation>짝수 페이지(&amp;E)</translation>
</message>
<message>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<source>O&amp;dd pages</source>
<translation>홀수 페이지(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>&amp;All pages</source>
<translation>전체 페이지(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Within range</source>
<translation>범위내(&amp;W)</translation>
</message>
<message>
<source>Alt+W</source>
<translation>Alt+W</translation>
</message>
<message>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Apply the selected master page to even, odd or all pages within the following range</source>
<translation>선택한 마스터 페이지를 다음 범위 내의 짝수, 홀수, 전체 페이지에 적용합니다</translation>
</message>
<message>
<source>to</source>
<translation>로</translation>
</message>
<message>
<source>Possible Hyphenation</source>
<translation>이용가능한 하이픈</translation>
</message>
</context>
<context>
<name>ArrowChooser</name>
<message>
<source>None</source>
<translation>없음</translation>
</message>
</context>
<context>
<name>AspellPlugin</name>
<message>
<source>Spell-checking support</source>
<translation>맞춤법 검사 지원</translation>
</message>
<message>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation>aspell을 통하여 맞춤법 검사 지원을 더합니다. 언어를 설치된 aspell 사전 중에서 선택할 수 있습니다 , 그리고 즉시 또는 선택한 텍스트상에서 맞춤법 검사를 수행할 수 있습니다 .</translation>
</message>
<message>
<source>0.1</source>
<translation>0.1</translation>
</message>
<message>
<source>Spell Checker</source>
<translation>맞춤법 검사기</translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
<message>
<source>Spell Check</source>
<translation>맞춤법 검사</translation>
</message>
<message>
<source>Mis-spelling:</source>
<translation>오류-단어:</translation>
</message>
<message>
<source>Replacement:</source>
<translation>치환:</translation>
</message>
<message>
<source>Active dictionary: </source>
<translation>활성 사전: </translation>
</message>
<message>
<source>Personal
Dictionary</source>
<translation>개인
사전</translation>
</message>
<message>
<source>&amp;Add Word</source>
<translation>단어 더하기(&amp;A)</translation>
</message>
<message>
<source>&amp;Change</source>
<translation>변경(&amp;C)</translation>
</message>
<message>
<source>C&amp;hange All</source>
<translation>전체 변경(&amp;H)</translation>
</message>
<message>
<source>&amp;Skip</source>
<translation>건너뛰기(&amp;S)</translation>
</message>
<message>
<source>S&amp;kip All</source>
<translation>전체 건너뛰기(&amp;K)</translation>
</message>
<message>
<source>&amp;Exit</source>
<translation>종료(&amp;E)</translation>
</message>
</context>
<context>
<name>AspellPluginImpl</name>
<message>
<source>Loaded </source>
<translation>읽어오기</translation>
</message>
<message>
<source>default </source>
<translation>기본값</translation>
</message>
<message>
<source> aspell dictionary.</source>
<translation> aspell 사전.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 설정 오류.</translation>
</message>
<message>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 생성시 오류.</translation>
</message>
<message>
<source>Spell-Checker</source>
<translation>맞춤법 검사기</translation>
</message>
<message>
<source>Spell-checking completed.</source>
<translation>맞춤법 검사 완료.</translation>
</message>
<message>
<source>Spell-checking done.</source>
<translation>맞춤법 검사 종료</translation>
</message>
<message>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation>AspellPluginImpl::on_fskipAllBtn_clicked(): 전체 경우를 생략할 수 없음 &quot;</translation>
</message>
<message>
<source> by adding it to the session list.</source>
<translation>세션 목록으로 더하기</translation>
</message>
<message>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): 단어를 개인 목록에 더할 수 없음</translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
<message>
<source>Arrows</source>
<translation>화살표</translation>
</message>
<message>
<source>Flow Chart</source>
<translation>플로우 차트</translation>
</message>
<message>
<source>Jigsaw</source>
<translation>퍼즐</translation>
</message>
<message>
<source>Specials</source>
<translation>기타</translation>
</message>
<message>
<source>Default Shapes</source>
<translation>기본 도형</translation>
</message>
</context>
<context>
<name>Barcode</name>
<message>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation>순수한 Postscript 바코드 작성자를 위한 Scribus 프런트 엔드</translation>
</message>
<message>
<source>&amp;Barcode...</source>
<translation>바코드(&amp;B)...</translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<source>&amp;Type:</source>
<translation>형태(&amp;T):</translation>
</message>
<message>
<source>Co&amp;de:</source>
<translation>코드(&amp;D):</translation>
</message>
<message>
<source>Select one of the available barcode type here</source>
<translation>이용가능한 바코드 형태 중 하나를 선택합니다</translation>
</message>
<message>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>코드 자체를 나타내는 숫자. 다음 도움말 메시지를 참조하십시오.</translation>
</message>
<message>
<source>Reset the barcode samples</source>
<translation>바코드 샘플 초기화</translation>
</message>
<message>
<source>&amp;Include text in barcode</source>
<translation>바코드에 텍스트 포함(&amp;I)</translation>
</message>
<message>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<source>If checked, there will be numbers in the barcode too</source>
<translation>체크시 바코드에 숫자를 입력합니다</translation>
</message>
<message>
<source>&amp;Guard whitespace</source>
<translation>여백 보호(&amp;G)</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>Draw arrows to be sure of space next the code</source>
<translation>다음 코드의 간격을 확인하기 위하여 화살표를 그립니다</translation>
</message>
<message>
<source>I&amp;nclude checksum</source>
<translation>체크섬 포함(&amp;N)</translation>
</message>
<message>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<source>Generate and include a checksum in barcode</source>
<translation>바코드에서 체크섬의 생성 및 포함</translation>
</message>
<message>
<source>Incl&amp;ude checksum digit</source>
<translation>체크섬 디지트 포함(&amp;U)</translation>
</message>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>Include the checksum digit in the barcode text</source>
<translation>바코드 텍스트에서 체크섬 디지트 포함</translation>
</message>
<message>
<source>Colors</source>
<translation>색상</translation>
</message>
<message>
<source>&amp;Background</source>
<translation>배경(&amp;B)</translation>
</message>
<message>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<source>Background color - under the code lines</source>
<translation>배경 색상 - 코드 선 하에서</translation>
</message>
<message>
<source>&amp;Lines</source>
<translation>선(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Color of the lines in barcode</source>
<translation>바코드에서 선 색상</translation>
</message>
<message>
<source>&amp;Text</source>
<translation>텍스트(&amp;T)</translation>
</message>
<message>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<source>Color of the text and numbers</source>
<translation>텍스트와 숫자 색상</translation>
</message>
<message>
<source>Hints and help is shown here</source>
<translation>여기에 힌트와 도움말이 보입니다</translation>
</message>
<message>
<source>Preview of the result. 72dpi sample.</source>
<translation>출력 미리보기. 72dpi 샘플</translation>
</message>
<message>
<source>Insert Barcode</source>
<translation>바코드 입력</translation>
</message>
<message>
<source>Format</source>
<translation>형식</translation>
</message>
</context>
<context>
<name>BarcodeGeneratorBase</name>
<message>
<source>&amp;Type:</source>
<translation>형태(&amp;T):</translation>
</message>
<message>
<source>Select one of the available barcode type here</source>
<translation>이용가능한 바코드를 선택</translation>
</message>
<message>
<source>The numeric representation of the code itself. See the help message below</source>
<translation>코드의 수치 표현. 아래 도움 메세지를 보시오</translation>
</message>
<message>
<source>Reset the barcode samples</source>
<translation>바코드 예제 초기화</translation>
</message>
<message>
<source>&amp;Include text in barcode</source>
<translation>바코드에서 텍스트 포함</translation>
</message>
<message>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<source>If checked, there will be numbers in the barcode too</source>
<translation>체크시, 바코드는 숫자이어야 합니다</translation>
</message>
<message>
<source>&amp;Guard whitespace</source>
<translation>공백 보기(&amp;G)</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>Draw arrows to be sure of space next the code</source>
<translation>다음 코드 공백을 확인하기 위한 화살표 그립니다</translation>
</message>
<message>
<source>Colors</source>
<translation>색상</translation>
</message>
<message>
<source>&amp;Background</source>
<translation>배경(&amp;B)</translation>
</message>
<message>
<source>Alt+B</source>
<translation>Alt+B</translation>
</message>
<message>
<source>Background color - under the code lines</source>
<translation>배경 색상 - 코드 선 아래</translation>
</message>
<message>
<source>&amp;Lines</source>
<translation>선(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Color of the lines in barcode</source>
<translation>바코드 선 색상</translation>
</message>
<message>
<source>&amp;Text</source>
<translation>텍스트(&amp;T)</translation>
</message>
<message>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<source>Color of the text and numbers</source>
<translation>텍스트와 수치 색상</translation>
</message>
<message>
<source>Hints and help is shown here</source>
<translation>힌트와 도움말이 여기에서 보여집니다.</translation>
</message>
<message>
<source>Preview of the result. 72dpi sample.</source>
<translation>출력 미리보기, 72dpi 샘플</translation>
</message>
<message>
<source>Co&amp;de:</source>
<translation>코드(&amp;D)</translation>
</message>
<message>
<source>I&amp;nclude checksum</source>
<translation>체크섬 포함(&amp;N)</translation>
</message>
<message>
<source>Alt+N</source>
<translation>Alt+N</translation>
</message>
<message>
<source>Generate and include a checksum in barcode</source>
<translation>바코드에 체크섬 생성 및 포함</translation>
</message>
<message>
<source>Incl&amp;ude checksum digit</source>
<translation>체크섬 디지트 포함(&amp;U)</translation>
</message>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>Include the checksum digit in the barcode text</source>
<translation>바코드 텍스트에서 체크섬 digit를 포함합니다</translation>
</message>
<message>
<source>Insert Barcode</source>
<translation>바코드 삽입</translation>
</message>
<message>
<source>Format</source>
<translation>형식</translation>
</message>
</context>
<context>
<name>Biblio</name>
<message>
<source>Rename</source>
<translation>다른 이름으로</translation>
</message>
<message>
<source>Delete</source>
<translation>삭제</translation>
</message>
<message>
<source>Scrapbook</source>
<translation>스크랩북</translation>
</message>
<message>
<source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
<translation>이름 &quot;%1&quot;이 이미 있습니다.
다른 이름을 선택하시오.</translation>
</message>
<message>
<source>Object</source>
<translation>객체</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<source>New Entry</source>
<translation>새 객체</translation>
</message>
<message>
<source>Choose a Scrapbook Directory</source>
<translation>스크랩북 사전 선택</translation>
</message>
<message>
<source>Choose a scrapbook file to import</source>
<translation>들여오기 위하여 스크랩북 파일 선택</translation>
</message>
<message>
<source>Choose a Directory</source>
<translation>사전 선택</translation>
</message>
<message>
<source>Create a new scrapbook page</source>
<translation>새 스크랩북 페이지 생성</translation>
</message>
<message>
<source>Load an existing scrapbook</source>
<translation>기존 스크랩북 읽어오기</translation>
</message>
<message>
<source>Save the selected scrapbook</source>
<translation>선택된 스크랩북 저장</translation>
</message>
<message>
<source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
<translation>Scribus 1.3.2로 부터 스크랩북 파일을 들여오기</translation>
</message>
<message>
<source>Close the selected scrapbook</source>
<translation>선택된 스크랩북 닫기</translation>
</message>
<message>
<source>Copy To:</source>
<translation>복사:</translation>
</message>
<message>
<source>Move To:</source>
<translation>이동:</translation>
</message>
<message>
<source>Main</source>
<translation>메인</translation>
</message>
<message>
<source>Copied Items</source>
<translation>복사된 객체</translation>
</message>
<message>
<source>New Name</source>
<translation>새 이름:</translation>
</message>
<message>
<source>Scrapbook (*.scs *.SCS)</source>
<translation>스크랩북 (*.scs *.SCS)</translation>
</message>
<message>
<source>Paste to Page</source>
<translation>페이지에 붙여넣기</translation>
</message>
<message>
<source>Save as...</source>
<translation>다른 이름으로 저장...</translation>
</message>
<message>
<source>Close</source>
<translation>닫기</translation>
</message>
<message>
<source>Delete Contents</source>
<translation>내용 삭제</translation>
</message>
<message>
<source>Do you really want to delete all entries?</source>
<translation>정말 전체 객체를 삭제하시겠습니까?</translation>
</message>
</context>
<context>
<name>BookMView</name>
<message>
<source>Move Bookmark</source>
<translation>북마크 이동</translation>
</message>
<message>
<source>Insert Bookmark</source>
<translation>북마크 삽입</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>Bookmarks</source>
<translation>북마크</translation>
</message>
</context>
<context>
<name>BookPalette</name>
<message>
<source>Bookmarks</source>
<translation>북마크</translation>
</message>
</context>
<context>
<name>ButtonIcon</name>
<message>
<source>Icon Placement</source>
<translation>아이콘 위치이동</translation>
</message>
<message>
<source>Layout:</source>
<translation>배치:</translation>
</message>
<message>
<source>Caption only</source>
<translation>자막만</translation>
</message>
<message>
<source>Icon only</source>
<translation>아이콘만</translation>
</message>
<message>
<source>Caption below Icon</source>
<translation>아이콘 아래 자막</translation>
</message>
<message>
<source>Caption above Icon</source>
<translation>아이콘 위 자막</translation>
</message>
<message>
<source>Caption right to Icon</source>
<translation>아이콘 오른쪽 자막</translation>
</message>
<message>
<source>Caption left to Icon</source>
<translation>아이콘 왼쪽 자막</translation>
</message>
<message>
<source>Scale:</source>
<translation>비율:</translation>
</message>
<message>
<source>Always</source>
<translation>항상</translation>
</message>
<message>
<source>When Icon is too small</source>
<translation>아이콘이 너무 작을 때</translation>
</message>
<message>
<source>When Icon is too big</source>
<translation>아이콘이 너무 클 때</translation>
</message>
<message>
<source>Never</source>
<translation>결코 없음</translation>
</message>
<message>
<source>Scale How:</source>
<translation>비율 크기:</translation>
</message>
<message>
<source>Proportional</source>
<translation>비례</translation>
</message>
<message>
<source>Non Proportional</source>
<translation>비례 아님</translation>
</message>
<message>
<source>Icon</source>
<translation>아이콘</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>Reset</source>
<translation>초기화</translation>
</message>
<message>
<source>Caption overlays Icon</source>
<translation>아이콘과 자막 겹침</translation>
</message>
</context>
<context>
<name>CMSPrefs</name>
<message>
<source>Perceptual</source>
<translation>지각</translation>
</message>
<message>
<source>Relative Colorimetric</source>
<translation>상대 색상계</translation>
</message>
<message>
<source>Saturation</source>
<translation>채도</translation>
</message>
<message>
<source>Absolute Colorimetric</source>
<translation>절대 색상계</translation>
</message>
</context>
<context>
<name>CMSPrefsBase</name>
<message>
<source>Form</source>
<translation>양식</translation>
</message>
<message>
<source>&amp;Activate Color Management</source>
<translation>색상 관리 활성화(&amp;A)</translation>
</message>
<message>
<source>System Profiles</source>
<translation>시스템 프로파일</translation>
</message>
<message>
<source>&amp;RGB Images:</source>
<translation>RGB 이미지(&amp;R):</translation>
</message>
<message>
<source>Default color profile for imported RGB images</source>
<translation>들여오는 RGB 이미지를 위한 기본 색상 프로파일</translation>
</message>
<message>
<source>&amp;CMYK Images:</source>
<translation>CMYK 이미지(&amp;C):</translation>
</message>
<message>
<source>Default color profile for imported CMYK images</source>
<translation>들여오는 CMYK 이미지를 위한 기본 색상 프로파일</translation>
</message>
<message>
<source>&amp;RGB Solid Colors:</source>
<translation>RGB 단일 색상(&amp;R):</translation>
</message>
<message>
<source>Default color profile for solid RGB colors on the page</source>
<translation>페이지상에서 단색 RGB 색상의 기본 색상 프로파일</translation>
</message>
<message>
<source>&amp;CMYK Solid Colors:</source>
<translation>CMY 단일색(&amp;C):</translation>
</message>
<message>
<source>Default color profile for solid CMYK colors on the page</source>
<translation>페이지상에서 단일색 CMYK 색상의 기본 색상 프로파일</translation>
</message>
<message>
<source>&amp;Monitor:</source>
<translation>모니터(&amp;M):</translation>
</message>
<message>
<source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
<translation>자신이 만든 또는 제조 업체에서받은 색상 프로필.
이 프로필은 모니터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
</message>
<message>
<source>P&amp;rinter:</source>
<translation>프린터(&amp;R):</translation>
</message>
<message>
<source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
<translation>제조 업체에서 발행되는 프린터 모델에 맞는 색상 프로필.
이 프로필은 프린터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
</message>
<message>
<source>Rendering Intents</source>
<translation>렌더링 목적</translation>
</message>
<message>
<source>Images:</source>
<translation>이미지:</translation>
</message>
<message>
<source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>이미지를 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우,
상대적인 색상계 또는 지각을 선택하시오.</translation>
</message>
<message>
<source>Sol&amp;id Colors:</source>
<translation>단일 색상(&amp;I):</translation>
</message>
<message>
<source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
<translation>단일 색상을 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우,
상대적인 색채계 또는 지각을 선택하시오.</translation>
</message>
<message>
<source>Enable 'soft proofing' of how your document colors will print,
based on the chosen printer profile.</source>
<translation>선택한 프린터 프로필을 기반으로, 문서 색상을 어떻게 인쇄하는가는 'soft - proofing'를 사용.</translation>
</message>
<message>
<source>Sim&amp;ulate Printer on the Screen</source>
<translation>화면상 프린터 시뮬레이션(&amp;U)</translation>
</message>
<message>
<source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
<translation>전체 색상 관리 환경 시뮬레이션 :
rgb 또는 cmyk 전체 색상을 프린터 색상 공간으로 변환합니다.</translation>
</message>
<message>
<source>Convert all colors to printer space</source>
<translation>전체 색상을 프린터 색상공간으로 변환</translation>
</message>
<message>
<source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
<translation>적절히 출력되지 않는 화면상에서 색상을 나타내는 방법.
이것은 매우 정확한 프로파일이 필요하고 단지 경고를 합니다.</translation>
</message>
<message>
<source>Mark Colors out of &amp;Gamut</source>
<translation>범위 밖 생상 표시(&amp;G)</translation>
</message>
<message>
<source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
<translation>흑점 보정은 사진 명암을 개선하는 방법입니다.
문서 중 사진이 있는 경우, 이것의 사용을 추천합니다.</translation>
</message>
<message>
<source>Use &amp;Blackpoint Compensation</source>
<translation>흑점 보정 사용(&amp;B)</translation>
</message>
</context>
<context>
<name>CMYKChoose</name>
<message>
<source>Edit Color</source>
<translation>색상 편집</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<source>Color &amp;Model</source>
<translation>색상 모델(&amp;M)</translation>
</message>
<message>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<source>Web Safe RGB</source>
<translation>Web Safe RGB</translation>
</message>
<message>
<source>Is Spot Color</source>
<translation>Spot 색상</translation>
</message>
<message>
<source>New</source>
<translation>새로운 색</translation>
</message>
<message>
<source>Old</source>
<translation>이전 색</translation>
</message>
<message>
<source>HSV-Colormap</source>
<translation>HSV-색상도</translation>
</message>
<message>
<source>C:</source>
<translation>C(남색):</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>M:</source>
<translation>M(자홍색):</translation>
</message>
<message>
<source>Y:</source>
<translation>Y(노란색):</translation>
</message>
<message>
<source>K:</source>
<translation>K(검은색):</translation>
</message>
<message>
<source>Dynamic Color Bars</source>
<translation>동적 색상 막대</translation>
</message>
<message>
<source>Static Color Bars</source>
<translation>정적 색상 막대</translation>
</message>
<message>
<source>R:</source>
<translation>R(적색):</translation>
</message>
<message>
<source>G:</source>
<translation>G(녹색):</translation>
</message>
<message>
<source>B:</source>
<translation>B(청색):</translation>
</message>
<message>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>&quot;%1&quot;라는 색상을 생성할 수 없습니다.
투명 색상명으로 예약되었습니다.</translation>
</message>
<message>
<source>The name of the color already exists,
please choose another one.</source>
<translation>색상 이름이 이미 있습니다,
다른 이름을 선택하시오.</translation>
</message>
<message>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation> 이것을 선택하는 것은 이 색상을 spot 색상으로 만들며, 평판이나 분리를 생성시킬 때 다른 spot을 생성시킵니다. 이것은 로고 또는 다른 색상을 정확하게 나타낼 때 자주 사용되며, 즉 CMYK 잉크로 복사될 수 없습니다. 메탈릭 또는 형광 잉크는 CMYK 잉크로 쉽게 복사할 수 없는 좋은 예입니다.</translation>
</message>
<message>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation>색상관리를 할 수 있다면, 삼각형 경고 표시는 색상이 현재 선택된 프린터 프로파일의 색상범위 밖에 있다는 경고입니다. 이 의미는 화면상에서 보이는 것을 정확하게 색상을 출력할 수 없음을 의미합니다. 온라인 도움말 색상관리 부분에서 경고에 대한 더 많은 정보를 얻을 수 있습니다.</translation>
</message>
<message>
<source>You cannot create a color without a name
Please give it a name</source>
<translation>이름이 없이 색상을 생성할 수 없습니다
이름을 부여하시오</translation>
</message>
</context>
<context>
<name>CStyleP</name>
<message>
<location filename="../smcstylew.ui" line="13"/>
<source>Form1</source>
<translation>양식1</translation>
</message>
<message>
<location filename="../smcstylew.ui" line="49"/>
<source>Based On:</source>
<translation>근거:</translation>
</message>
<message>
<location filename="../smcstylew.ui" line="109"/>
<source>Colors</source>
<translation>색상</translation>
</message>
</context>
<context>
<name>CStylePBase</name>
<message>
<source>Colors</source>
<translation>색상</translation>
</message>
</context>
<context>
<name>CWDialog</name>
<message>
<source>Color Wheel</source>
<translation>색상 판</translation>
</message>
<message>
<source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
<translation>기본 색상을 얻기 위해 색상 판을 클릭합니다. 색상 모델은 선택된 탭에 의존합니다.</translation>
</message>
<message>
<source>Result Colors</source>
<translation>출력 색상</translation>
</message>
<message>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<source>Colors of your chosen color scheme.</source>
<translation>선택한 색상 체계의 색상</translation>
</message>
<message>
<source>Color Scheme Method</source>
<translation>색상 체계 방법</translation>
</message>
<message>
<source>Angle:</source>
<translation>각도:</translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>선택한 값과 다른 것 사이의 차이. 자세한 내용은 문서를 참조하십시오.</translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>색상 체계를 생성하는 방법을 선택. 자세한 정보는 문서를 참조하시오.</translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation>생성된 색상을 문서 색상으로 병합</translation>
</message>
<message>
<source>&amp;Merge</source>
<translation>병합(&amp;M)</translation>
</message>
<message>
<source>Alt+M</source>
<translation>Alt+M</translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation>문서 색상에서 생성 색깔을 치환</translation>
</message>
<message>
<source>&amp;Replace</source>
<translation>치환(&amp;R)</translation>
</message>
<message>
<source>Alt+R</source>
<translation>Alt+R</translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation>손대지 않은 색상을 남겨둠</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Preview:</source>
<translation>미리보기:</translation>
</message>
<message>
<source>Sample color scheme.</source>
<translation>예제 색상 체계.</translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>일반 시력결손을 시험함. 시력 결손 형태를 선택하시오.</translation>
</message>
<message>
<source>Vision Defect Type:</source>
<translation>색맹 형태:</translation>
</message>
<message>
<source>C:</source>
<translation>C(남색):</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>M:</source>
<translation>M(자홍색):</translation>
</message>
<message>
<source>Y:</source>
<translation>Y(노란색):</translation>
</message>
<message>
<source>K:</source>
<translation>K(검은색):</translation>
</message>
<message>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<source>HSV:</source>
<translation>HSV:</translation>
</message>
<message>
<source>R:</source>
<translation>R(적색):</translation>
</message>
<message>
<source>G:</source>
<translation>G(녹색):</translation>
</message>
<message>
<source>B:</source>
<translation>B(청색):</translation>
</message>
<message>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<source>H:</source>
<translation>H(색조):</translation>
</message>
<message>
<source>S:</source>
<translation>S(채도):</translation>
</message>
<message>
<source>V:</source>
<translation>V(명암):</translation>
</message>
<message>
<source>Document</source>
<translation>문서</translation>
</message>
</context>
<context>
<name>CWDialogBase</name>
<message>
<source>Color Wheel</source>
<translation>색상판</translation>
</message>
<message>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
<message>
<source>C:</source>
<translation>C(남색):</translation>
</message>
<message>
<source>M:</source>
<translation>M(자홍색):</translation>
</message>
<message>
<source>Y:</source>
<translation>Y(노란색):</translation>
</message>
<message>
<source>K:</source>
<translation>K(검은색):</translation>
</message>
<message>
<source>RGB:</source>
<translation>RGB:</translation>
</message>
<message>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<source>R:</source>
<translation>R(적색):</translation>
</message>
<message>
<source>G:</source>
<translation>G(녹색):</translation>
</message>
<message>
<source>B:</source>
<translation>B(청색):</translation>
</message>
<message>
<source>CMYK:</source>
<translation>CMYK:</translation>
</message>
<message>
<source>Document</source>
<translation>문서</translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>색상 스킴을 생성하기 위하여 방법을 선택합니다. 더 자세한 정보는 문서를 참조하세요</translation>
</message>
<message>
<source>Angle:</source>
<translation>각도:</translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조.</translation>
</message>
<message>
<source>Preview:</source>
<translation>미리보기:</translation>
</message>
<message>
<source>Vision Defect Type:</source>
<translation>색맹 형태:</translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation>생성된 색상을 문서색상로 병합</translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation>생성된 색상을 문서 색상로 치환</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation>손대지 않은 색상을 남겨둠.</translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>여기에서 일반적인 색맹형태를 모의시험합니다. 색맹 형태를 선택하시오.</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
</context>
<context>
<name>ChTable</name>
<message>
<source>You can see a thumbnail if you press
and hold down the right mouse button
 
The Insert key inserts a Glyph into the Selection below
and the Delete key removes the last inserted one</source>
<translation>오른쪽 마우스 버튼을 누르고 있으면 썸네일을 볼 수 있습니다.
삽입키는 사용자문자를 아래 선택으로 삽입하고 삭제키는 마지막 삽입된 것을 제거합니다.</translation>
</message>
</context>
<context>
<name>CharSelect</name>
<message>
<source>Font:</source>
<translation>글꼴:</translation>
</message>
<message>
<source>Character Class:</source>
<translation>문자 종류:</translation>
</message>
<message>
<source>&amp;Insert</source>
<translation>삽입(&amp;I)</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
</message>
<message>
<source>Insert the characters at the cursor in the text</source>
<translation>텍스트에서 커서위치에 문자를 입력</translation>
</message>
<message>
<source>Delete the current selection(s).</source>
<translation>현재 선택을 삭제합니다.</translation>
</message>
<message>
<source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation>오른쪽 마우스 버튼을 계속 누르고 있으면 썸네일을 볼 수 있습니다. 삽입키는 사용자 문자표를 선택된 곳 아래에 삽입하며 삭제키는 마지막 삽입된 그림문자를 삭제합니다.</translation>
</message>
<message>
<source>Enhanced Palette</source>
<translation>사용자 문자표</translation>
</message>
<message>
<source>Quick Palette</source>
<translation>문자 빨리 찾기</translation>
</message>
<message>
<source>Character Palette</source>
<translation>문자 팔레트</translation>
</message>
<message>
<source>Hide/Show Enhanced Palette</source>
<translation>사용자 문자표 숨기기/보이기</translation>
</message>
</context>
<context>
<name>CharStyleComboBox</name>
<message>
<source>No Style</source>
<translation>스타일 없음</translation>
</message>
</context>
<context>
<name>CharTable</name>
<message>
<source>Delete</source>
<translation>삭제</translation>
</message>
</context>
<context>
<name>CharTableView</name>
<message>
<source>Delete</source>
<translation>삭제</translation>
</message>
</context>
<context>
<name>CheckDocument</name>
<message>
<source>Glyphs missing</source>
<translation>사용자 문자표 빠짐</translation>
</message>
<message>
<source>Text overflow</source>
<translation>텍스트 오버플로우</translation>
</message>
<message>
<source>Object is not on a Page</source>
<translation>객체가 페이지에 없음</translation>
</message>
<message>
<source>Missing Image</source>
<translation>이미지 빠짐</translation>
</message>
<message>
<source>Object has transparency</source>
<translation>객체가 투명도를 가짐</translation>
</message>
<message>
<source>Object is a PDF Annotation or Field</source>
<translation>객체가 PDF 주석이나 필드임</translation>
</message>
<message>
<source>Object is a placed PDF</source>
<translation>객체가 배치된 PDF입니다</translation>
</message>
<message>
<source>Document</source>
<translation>문서</translation>
</message>
<message>
<source>No Problems found</source>
<translation>문제가 없습니다</translation>
</message>
<message>
<source>Page </source>
<translation>페이지 </translation>
</message>
<message>
<source>Free Objects</source>
<translation>자유 객체</translation>
</message>
<message>
<source>Problems found</source>
<translation>문제가 발견되었습니다</translation>
</message>
<message>
<source>Preflight Verifier</source>
<translation>문서 검증</translation>
</message>
<message>
<source>Items</source>
<translation>객체</translation>
</message>
<message>
<source>Problems</source>
<translation>문제</translation>
</message>
<message>
<source>Current Profile:</source>
<translation>현재 프로파일:</translation>
</message>
<message>
<source>&amp;Ignore Errors</source>
<translation>오류 무시(&amp;I)</translation>
</message>
<message>
<source>Check again</source>
<translation>다시 체크</translation>
</message>
<message>
<source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
<translation>이미지 해상도가 1 % DPI 미만, 현재 2 % x % 3 DPI입니다.</translation>
</message>
<message>
<source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
<translation>이미지 해상도가 1 % DPI 이상, 현재 2 % x % 3 DPI입니다.</translation>
</message>
<message>
<source>Image is GIF</source>
<translation>GIF 이미지 입니다</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Transparency used</source>
<translation>투명도 사용 중</translation>
</message>
<message>
<source>Blendmode used</source>
<translation>혼합모드 사용 중</translation>
</message>
<message>
<source>Layer &quot;%1&quot;</source>
<translation>레이어 &quot;%1&quot;</translation>
</message>
<message>
<source>Annotation uses a non TrueType font</source>
<translation>주석에서 TrueType 글꼴이 아닌 것이 사용합니다</translation>
</message>
<message>
<source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
<translation>문서 프로필을 기초로 보고서를 생성합니다. 옵션은 문서 설치나 기본설정을 설정할 수 있습니다</translation>
</message>
<message>
<source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
<translation>오류 발견을 무시하고 내보내기 또는 출력을 계속합니다. 계속 하기 전 무시한 오류를 확인하시요.</translation>
</message>
<message>
<source>Rerun the document scan to check corrections you may have made</source>
<translation>정정을 체그하기 이하여 문서 스캔을 재 실행합니다</translation>
</message>
<message>
<source>Empty Image Frame</source>
<translation>빈 이미지 프레임</translation>
</message>
</context>
<context>
<name>ChooseStyles</name>
<message>
<location filename="../editformats.cpp" line="95"/>
<source>Choose Styles</source>
<translation>스타일 선택</translation>
</message>
<message>
<location filename="../editformats.cpp" line="100"/>
<source>Available Styles</source>
<translation>이용가능한 스타일</translation>
</message>
</context>
<context>
<name>CollectForOutput</name>
<message>
<source>Choose a Directory</source>
<translation>폴더 선택</translation>
</message>
<message>
<source>Collecting...</source>
<translation>수집 중...</translation>
</message>
<message>
<source>Cannot collect the file:
%1</source>
<translation>파일을 수집할 수 없습니다:
%1</translation>
</message>
<message>
<source>Cannot collect all files for output for file:
%1</source>
<translation>출력 파일로 전체 파일을 모을 수 없습니다:
%1</translation>
</message>
</context>
<context>
<name>ColorManager</name>
<message>
<source>Colors</source>
<translation>색상</translation>
</message>
<message>
<source>&amp;Import</source>
<translation>들여오기(&amp;I)</translation>
</message>
<message>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<source>&amp;Edit</source>
<translation>편집(&amp;E)</translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation>복제(&amp;U)</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>&amp;Remove Unused</source>
<translation>사용하지 않는 것 삭제(&amp;R)</translation>
</message>
<message>
<source>Color Sets</source>
<translation>색상 모음</translation>
</message>
<message>
<source>Current Color Set:</source>
<translation>현재 색상 모음:</translation>
</message>
<message>
<source>&amp;Save Color Set</source>
<translation>색상 모음 저장(&amp;S)</translation>
</message>
<message>
<source>Choose a color set to load</source>
<translation>읽어오는 색상 모음 선택</translation>
</message>
<message>
<source>Save the current color set</source>
<translation>현재 색상 모음 저장</translation>
</message>
<message>
<source>Remove unused colors from current document's color set</source>
<translation>현재 문서의 색상 모음에서 사용되지 않은 색상을 제거합니다</translation>
</message>
<message>
<source>Import colors to the current set from an existing document</source>
<translation>기존 문서에서 현재 색상 설정에 색상 들여오기</translation>
</message>
<message>
<source>Create a new color within the current set</source>
<translation>현재 설정 사이에 새로운 색상을 생성합니다</translation>
</message>
<message>
<source>Edit the currently selected color</source>
<translation>현재 선택된 색상 편집</translation>
</message>
<message>
<source>Make a copy of the currently selected color</source>
<translation>현재 선택된 색상의 사본 생성</translation>
</message>
<message>
<source>Delete the currently selected color</source>
<translation>현재 선택된 색상 삭제</translation>
</message>
<message>
<source>Make the current colorset the default color set</source>
<translation>현재 색상 모음을 기본 색상 모음으로 만듦니다</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<source>Choose a Name</source>
<translation>새 이름 선택</translation>
</message>
<message>
<source>Copy of %1</source>
<translation>%1 복사</translation>
</message>
<message>
<source>New Color</source>
<translation>새 색상</translation>
</message>
<message>
<source>Information</source>
<translation>정보</translation>
</message>
<message>
<source>Import</source>
<translation>들여오기</translation>
</message>
<message>
<source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import.
Not all files have DSC conformant comments where the color descriptions are located.
This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
<translation>% 1 파일을 가져올 수있는 색상을 포함하지 않습니다.
이 파일이 포스트 스크립트 기반이라면, 파일을 읽어오려고 할 것입니다 - &amp;&gt; 읽어오기.
모든 파일이 색상 설명이 위치한 DSC 준수 의견을 가지지 않습니다.
이것은 몇몇 파일로부터 색상을 읽어오는 것을 금지합니다.
더 자세한 내용은 문서 색상 섹션의 편집부분을 참조하십시오.</translation>
</message>
<message>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
<translation>색상 관리가 활성화 된다면 삼각형의 경고 지시자는 현재 선택된 프린터의 색상 범위 밖을 의미하는 것입니다. 이는 색상이 화면상에서 나타나는 것과 같이 정확히 출력이 되지 않은 것입니다. Spot 색상이 적색원으로 나타납니다.범위 오류에 대한 더 자세한 내용은 색상 관리부분에서 온라인 도움말이 있습니다. 등록색상은 등록마크 옆에 있는 색상을 가질 것입니다. 프린터 마크와 잘림 마크를 위한 등록을 사용합니다.</translation>
</message>
<message>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation>전체 지원 형식 (%1);;문서 (%2);;기타 파일 (%3);;전체 파일 (*)</translation>
</message>
</context>
<context>
<name>ColorWheel</name>
<message>
<source>Monochromatic</source>
<translation>단일색상</translation>
</message>
<message>
<source>Analogous</source>
<translation>유사색상</translation>
</message>
<message>
<source>Complementary</source>
<translation>보색</translation>
</message>
<message>
<source>Split Complementary</source>
<translation>분열 보색</translation>
</message>
<message>
<source>Triadic</source>
<translation>3색</translation>
</message>
<message>
<source>Tetradic (Double Complementary)</source>
<translation>3색 (이중 보색)</translation>
</message>
<message>
<source>Base Color</source>
<translation>기본 색상</translation>
</message>
<message>
<source>Monochromatic Light</source>
<translation>밝은 단일색상</translation>
</message>
<message>
<source>Monochromatic Dark</source>
<translation>어두운 단일색상</translation>
</message>
<message>
<source>1st. Analogous</source>
<translation>첫째 유사색상</translation>
</message>
<message>
<source>2nd. Analogous</source>
<translation>둘째 유사색상</translation>
</message>
<message>
<source>1st. Split</source>
<translation>첫째 분열 색상</translation>
</message>
<message>
<source>2nd. Split</source>
<translation>둘째 분열 색상</translation>
</message>
<message>
<source>3rd. Split</source>
<translation>셋째 분열 색상</translation>
</message>
<message>
<source>4th. Split</source>
<translation>네째 분열 색상</translation>
</message>
<message>
<source>1st. Triadic</source>
<translation>첫째 3색</translation>
</message>
<message>
<source>2nd. Triadic</source>
<translation>둘째 3색</translation>
</message>
<message>
<source>1st. Tetradic (base opposite)</source>
<translation>첫째 3색 (기본 반대)</translation>
</message>
<message>
<source>2nd. Tetradic (angle)</source>
<translation>둘째 3색(각도)</translation>
</message>
<message>
<source>3rd. Tetradic (angle opposite)</source>
<translation>세째 3색(각도 반대)</translation>
</message>
</context>
<context>
<name>ColorWheelDialog</name>
<message>
<source>Cr&amp;eate color...</source>
<translation>색상 생성(&amp;E)...</translation>
</message>
<message>
<source>&amp;Import existing color...</source>
<translation>기존 색상 들여오기(&amp;I)...</translation>
</message>
<message>
<source>&amp;Merge colors</source>
<translation>색상 병합(&amp;M)</translation>
</message>
<message>
<source>&amp;Replace colors</source>
<translation>색상 치환(&amp;R)</translation>
</message>
<message>
<source>E&amp;xit</source>
<translation>종료(&amp;X)</translation>
</message>
<message>
<source>C&amp;olor</source>
<translation>색상(&amp;O)</translation>
</message>
<message>
<source>Normal Vision</source>
<translation>정상 시력</translation>
</message>
<message>
<source>Protanopia (red)</source>
<translation>색맹 (적)</translation>
</message>
<message>
<source>Deuteranopia (green)</source>
<translation>색맹 (녹)</translation>
</message>
<message>
<source>Tritanopia (blue)</source>
<translation>색맹 (청)</translation>
</message>
<message>
<source>Full Color Blindness</source>
<translation>완전 색맹</translation>
</message>
<message>
<source>Vision Defect:</source>
<translation>색맹:</translation>
</message>
<message>
<source>Saturation:</source>
<translation>채도:</translation>
</message>
<message>
<source>Value:</source>
<translation>명암:</translation>
</message>
<message>
<source>Color Wheel</source>
<translation>색상판</translation>
</message>
<message>
<source>Color</source>
<translation>색상</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>C</source>
<translation>C(남색)</translation>
</message>
<message>
<source>M</source>
<translation>M(자홍색)</translation>
</message>
<message>
<source>Y</source>
<translation>Y(노랑색)</translation>
</message>
<message>
<source>K</source>
<translation>K(검은색)</translation>
</message>
<message>
<source>Select Method:</source>
<translation>선택 방법:</translation>
</message>
<message>
<source>Angle (0 - 90 degrees):</source>
<translation>각도 (0 -90 도):</translation>
</message>
<message>
<source>&amp;Merge Colors</source>
<translation>색상 병합(&amp;M)</translation>
</message>
<message>
<source>&amp;Replace Colors</source>
<translation>색상 치환(&amp;R)</translation>
</message>
<message>
<source>Merge created colors into the document colors</source>
<translation>생성된 색상을 문서 색상으로 병합</translation>
</message>
<message>
<source>Replace created colors in the document colors</source>
<translation>문서 색상을 생성 색상으로 치환</translation>
</message>
<message>
<source>Leave colors untouched</source>
<translation>손대지 않은 색상을 남겨둠</translation>
</message>
<message>
<source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
<translation>선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조</translation>
</message>
<message>
<source>Saturation component in HSV mode</source>
<translation>HSV 모드에서 채도 요소</translation>
</message>
<message>
<source>Value component in HSV mode</source>
<translation>HSV 모드에서 명암요소</translation>
</message>
<message>
<source>Click the wheel to get the base color. It is hue in HSV mode.</source>
<translation>기본색상을 얻기 위해 색상판을 클릭. HSV모드에서 색조임</translation>
</message>
<message>
<source>Sample color scheme</source>
<translation>샘플 색상 스킴</translation>
</message>
<message>
<source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
<translation>색상 스키카를 생성하기 위하여 방법을 선택합니다. 더 자사한 정보는 문서를 참조하세요</translation>
</message>
<message>
<source>Colors of your chosen color scheme</source>
<translation>선택 색상 스킴 색상</translation>
</message>
<message>
<source>Simulate common vision defects here. Select type of the defect.</source>
<translation>여기에서 일반 색맹을 모의시험합니다. 색명 형태를 선택하세요..</translation>
</message>
<message>
<source>Merging colors</source>
<translation>색상 병합 중</translation>
</message>
<message>
<source>Error: </source>
<translation>오류: </translation>
</message>
<message>
<source>Color %1 exists already!</source>
<translation>색상 %1이 이미 있습니다!</translation>
</message>
<message>
<source>Color %1 appended.</source>
<translation>상 %1을 첨가합니다.</translation>
</message>
<message>
<source>Now opening the color manager.</source>
<translation>색상 관리자 여는 중</translation>
</message>
<message>
<source>Color Merging</source>
<translation>색상 병합</translation>
</message>
<message>
<source>New Color</source>
<translation>새 색상</translation>
</message>
<message>
<source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
<translation>요청받은 색상을 찾을 수 없습니다. 검정, 회색 또는 흰색을 선택하여야 합니다. 이 색상에 처리할 방법이 없습니다.</translation>
</message>
<message>
<source>C&amp;olor Components...</source>
<translation>요소(&amp;O)</translation>
</message>
<message>
<source>Protanopia (Red)</source>
<translation>색맹 (적)</translation>
</message>
<message>
<source>Deuteranopia (Green)</source>
<translation>색맹 (녹)</translation>
</message>
<message>
<source>Tritanopia (Blue)</source>
<translation>색맹 (청)</translation>
</message>
</context>
<context>
<name>ColorWheelPlugin</name>
<message>
<source>&amp;Color Wheel...</source>
<translation>색상판(&amp;C)...</translation>
</message>
<message>
<source>Color setting helper</source>
<translation>색상 설정 도우미</translation>
</message>
<message>
<source>Color selector with color theory included.</source>
<translation>색상 이론을 포함하는 색상 선택기</translation>
</message>
</context>
<context>
<name>CommonStrings</name>
<message>
<source>&amp;Apply</source>
<translation>적용(&amp;A)</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>확인(&amp;O)</translation>
</message>
<message>
<source>&amp;Save</source>
<translation>저장(&amp;S)</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>None</source>
<comment>color name</comment>
<translation>없음</translation>
</message>
<message>
<source>Custom</source>
<comment>CommonStrings, custom page size</comment>
<translation>사용자 설정</translation>
</message>
<message>
<source>Single Page</source>
<translation>한 쪽</translation>
</message>
<message>
<source>Double Sided</source>
<translation>두 쪽</translation>
</message>
<message>
<source>3-Fold</source>
<translation>세 쪽</translation>
</message>
<message>
<source>4-Fold</source>
<translation>네 쪽</translation>
</message>
<message>
<source>Left Page</source>
<translation>왼쪽 페이지</translation>
</message>
<message>
<source>Middle</source>
<translation>중앙 페이지</translation>
</message>
<message>
<source>Middle Left</source>
<translation>중앙 왼쪽 페이지</translation>
</message>
<message>
<source>Middle Right</source>
<translation>중앙 오른쪽 페이지</translation>
</message>
<message>
<source>Right Page</source>
<translation>오른쪽 페이지</translation>
</message>
<message>
<source>Monday</source>
<translation>월요일</translation>
</message>
<message>
<source>Tuesday</source>
<translation>화요일</translation>
</message>
<message>
<source>Wednesday</source>
<translation>수요일</translation>
</message>
<message>
<source>Thursday</source>
<translation>목요일</translation>
</message>
<message>
<source>Friday</source>
<translation>금요일</translation>
</message>
<message>
<source>Saturday</source>
<translation>토요일</translation>
</message>
<message>
<source>Sunday</source>
<translation>일요일</translation>
</message>
<message>
<source>January</source>
<translation>1월</translation>
</message>
<message>
<source>February</source>
<translation>2월</translation>
</message>
<message>
<source>March</source>
<translation>3월</translation>
</message>
<message>
<source>April</source>
<translation>4월</translation>
</message>
<message>
<source>May</source>
<translation>5월</translation>
</message>
<message>
<source>June</source>
<translation>6월</translation>
</message>
<message>
<source>July</source>
<translation>6월</translation>
</message>
<message>
<source>August</source>
<translation>8월</translation>
</message>
<message>
<source>September</source>
<translation>9월</translation>
</message>
<message>
<source>October</source>
<translation>10월</translation>
</message>
<message>
<source>November</source>
<translation>11월</translation>
</message>
<message>
<source>December</source>
<translation>12월</translation>
</message>
<message>
<source>Yes</source>
<translation>예</translation>
</message>
<message>
<source>No</source>
<translation>아니오</translation>
</message>
<message>
<source>&amp;Yes</source>
<translation>예(&amp;Y)</translation>
</message>
<message>
<source>&amp;No</source>
<translation>아니오(&amp;N)</translation>
</message>
<message>
<source>Left Page</source>
<comment>Left page location</comment>
<translation>왼쪽 페이지</translation>
</message>
<message>
<source>Middle</source>
<comment>Middle page location</comment>
<translation>중앙 페이지</translation>
</message>
<message>
<source>Middle Left</source>
<comment>Middle Left page location</comment>
<translation>중앙 왼쪽 페이지</translation>
</message>
<message>
<source>Middle Right</source>
<comment>Middle Right page location</comment>
<translation>중앙 오른쪽 페이지</translation>
</message>
<message>
<source>Right Page</source>
<comment>Right page location</comment>
<translation>오른쪽 페이지</translation>
</message>
<message>
<source>Normal</source>
<comment>Default single master page</comment>
<translation>기본 한 페이지</translation>
</message>
<message>
<source>Normal Left</source>
<comment>Default left master page</comment>
<translation>기본 왼쪽 페이지</translation>
</message>
<message>
<source>Normal Middle</source>
<comment>Default middle master page</comment>
<translation>기본 중앙 페이지</translation>
</message>
<message>
<source>Normal Right</source>
<comment>Default right master page</comment>
<translation>기본 오른쪽 페이지</translation>
</message>
<message>
<source>Normal Vision</source>
<comment>Color Blindness - Normal Vision</comment>
<translation>정상 시력</translation>
</message>
<message>
<source>Protanopia (Red)</source>
<comment>Color Blindness - Red Color Blind</comment>
<translation>적색 이상</translation>
</message>
<message>
<source>Deuteranopia (Green)</source>
<comment>Color Blindness - Greed Color Blind</comment>
<translation>녹색 이상</translation>
</message>
<message>
<source>Tritanopia (Blue)</source>
<comment>Color Blindness - Blue Color Blind</comment>
<translation>청색 이상</translation>
</message>
<message>
<source>Full Color Blindness</source>
<comment>Color Blindness - Full Color Blindness</comment>
<translation>전 색상 색맹</translation>
</message>
<message>
<source>Custom: </source>
<comment>Custom Tab Fill Option</comment>
<translation>사용자 탭 설정: </translation>
</message>
<message>
<source>Solid Line</source>
<translation>실선</translation>
</message>
<message>
<source>Dashed Line</source>
<translation>대시선</translation>
</message>
<message>
<source>Dotted Line</source>
<translation>점선</translation>
</message>
<message>
<source>Dash Dot Line</source>
<translation>대시점선</translation>
</message>
<message>
<source>Dash Dot Dot Line</source>
<translation>대시점점선</translation>
</message>
<message>
<source>None</source>
<comment>Optical Margin Setting</comment>
<translation>없음</translation>
</message>
<message>
<source>Left Protruding</source>
<comment>Optical Margin Setting</comment>
<translation>왼쪽 돌출</translation>
</message>
<message>
<source>Right Protruding</source>
<comment>Optical Margin Setting</comment>
<translation>오른쪽 돌출</translation>
</message>
<message>
<source>Left Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation>왼쪽 문장 부호</translation>
</message>
<message>
<source>Right Hanging Punctuation</source>
<comment>Optical Margin Setting</comment>
<translation>오른쪽 문장 부호</translation>
</message>
<message>
<source>Default</source>
<comment>Optical Margin Setting</comment>
<translation>기본값</translation>
</message>
<message>
<source>Min. Word Tracking</source>
<translation>최소 단어 찾기</translation>
</message>
<message>
<source>Max. Word Tracking</source>
<translation>최대 단어 찾기</translation>
</message>
<message>
<source>Min. Glyph Extension</source>
<translation>최소 사용자 문자표 확장</translation>
</message>
<message>
<source>Max. Glyph Extension</source>
<translation>최대 사용자 문자표 확장</translation>
</message>
<message>
<source>RGB</source>
<comment>Colorspace</comment>
<translation>RGB</translation>
</message>
<message>
<source>CMYK</source>
<comment>Colorspace</comment>
<translation>CMYK</translation>
</message>
<message>
<source>Grayscale</source>
<comment>Colorspace</comment>
<translation>회색톤</translation>
</message>
<message>
<source>Duotone</source>
<comment>Colorspace</comment>
<translation>2색조</translation>
</message>
<message>
<source>Unknown</source>
<comment>Colorspace (Unknown)</comment>
<translation>미정</translation>
</message>
<message>
<source>PostScript</source>
<translation>포스트스크립트</translation>
</message>
<message>
<source>Text Frame</source>
<translation>텍스트 프레임</translation>
</message>
<message>
<source>Image Frame</source>
<translation>이미지 프레임</translation>
</message>
<message>
<source>Line</source>
<translation>선</translation>
</message>
<message>
<source>Polygon</source>
<translation>다각형</translation>
</message>
<message>
<source>Polyline</source>
<translation>다수 선</translation>
</message>
<message>
<source>Text on a Path</source>
<translation>경로상 텍스트</translation>
</message>
<message>
<source>Multiple</source>
<comment>Multiple frame types</comment>
<translation>다수 프레임 형태</translation>
</message>
<message>
<source>PDF Push Button</source>
<translation>PDF 밀기 단추</translation>
</message>
<message>
<source>PDF Text Field</source>
<translation>PDF 텍스트 필드</translation>
</message>
<message>
<source>PDF Check Box</source>
<translation>PDF 체크상자</translation>
</message>
<message>
<source>PDF Combo Box</source>
<translation>PDF 콤보상자</translation>
</message>
<message>
<source>PDF List Box</source>
<translation>PDF 목록상자</translation>
</message>
<message>
<source>PDF Text Annotation</source>
<translation>PDF 텍스트 주석</translation>
</message>
<message>
<source>PDF Link Annotation</source>
<translation>PDF 링크 주석</translation>
</message>
<message>
<source>PostScript Level 1</source>
<translation>포스트스크립트 레벨 1</translation>
</message>
<message>
<source>PostScript Level 2</source>
<translation>포스트스크립트 레벨 2</translation>
</message>
<message>
<source>PostScript Level 3</source>
<translation>포스트스크립트 레벨 3</translation>
</message>
<message>
<source>Windows GDI</source>
<translation>Windows GDI</translation>
</message>
<message>
<source>Render Frame</source>
<translation>렌더 프레임</translation>
</message>
<message>
<source>Default Paragraph Style</source>
<translation>기본 문단 스타일</translation>
</message>
<message>
<source>Default Character Style</source>
<translation>기본 문자 스타일</translation>
</message>
<message>
<source>Default Line Style</source>
<translation>기본 선 스타일</translation>
</message>
</context>
<context>
<name>ContextMenu</name>
<message>
<source>Preview Settings</source>
<translation>미리보기 설정</translation>
</message>
<message>
<source>Paste File...</source>
<translation>파일 붙여넣기...</translation>
</message>
<message>
<source>Delete Page</source>
<translation>페이지 삭제</translation>
</message>
</context>
<context>
<name>CopyPageToMasterPageBase</name>
<message>
<source>Convert Page to Master Page</source>
<translation>페이지를 마스터 페이지로 변환</translation>
</message>
<message>
<source>Name:</source>
<translation>이름:</translation>
</message>
<message>
<source>Copy Applied Master Page Items</source>
<translation>적용된 마스터 페이지 객체 복사</translation>
</message>
</context>
<context>
<name>CopyPageToMasterPageDialog</name>
<message>
<source>New Master Page %1</source>
<translation>새 마스터 페이지 %1</translation>
</message>
</context>
<context>
<name>Cpalette</name>
<message>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<source> %</source>
<translation> 퍼센트</translation>
</message>
<message>
<source>Shade:</source>
<translation>음영:</translation>
</message>
<message>
<source>Opacity:</source>
<translation>불투명도:</translation>
</message>
<message>
<source>Move Vector</source>
<translation>벡터 이동</translation>
</message>
<message>
<source>Normal</source>
<translation>보통</translation>
</message>
<message>
<source>Horizontal Gradient</source>
<translation>수평 그라디언트</translation>
</message>
<message>
<source>Vertical Gradient</source>
<translation>수직 그라디언트</translation>
</message>
<message>
<source>Diagonal Gradient</source>
<translation>대각선 그라디언트</translation>
</message>
<message>
<source>Cross Diagonal Gradient</source>
<translation>교차 대각선 그라디언트</translation>
</message>
<message>
<source>Radial Gradient</source>
<translation>방사 그라디언트</translation>
</message>
<message>
<source>Free linear Gradient</source>
<translation>자유 직선 그라디언트</translation>
</message>
<message>
<source>Free radial Gradient</source>
<translation>자유 방사 그라디언트</translation>
</message>
<message>
<source>Edit Line Color Properties</source>
<translation>선 색상 속성 편집</translation>
</message>
<message>
<source>Edit Fill Color Properties</source>
<translation>채움 색상 속성 편집</translation>
</message>
<message>
<source>Saturation of color</source>
<translation>색상 채도</translation>
</message>
<message>
<source>Normal or gradient fill method</source>
<translation>보통 또는 그라디언트 채움 방법</translation>
</message>
<message>
<source>Set the transparency for the color selected</source>
<translation>선택 색상의 투명도 설정</translation>
</message>
<message>
<source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
<translation>왼쪽 마우스 버튼을 눌러 그라디언트 백터의 시작을 이동하고 오른쪽 마우스를 눌러 그라디언트 벡터의 끝으로 이동시킵니다.</translation>
</message>
<message>
<source>Transparency Settings</source>
<translation>투명도 설정</translation>
</message>
<message>
<source>Blend Mode:</source>
<translation>혼합 모드:</translation>
</message>
<message>
<source>Darken</source>
<translation>어둡게</translation>
</message>
<message>
<source>Lighten</source>
<translation>밝게</translation>
</message>
<message>
<source>Multiply</source>
<translation>곱셈</translation>
</message>
<message>
<source>Screen</source>
<translation>화면</translation>
</message>
<message>
<source>Overlay</source>
<translation>중첩</translation>
</message>
<message>
<source>Hard Light</source>
<translation>아주 밝게</translation>
</message>
<message>
<source>Soft Light</source>
<translation>중간 밝게</translation>
</message>
<message>
<source>Difference</source>
<translation>차이</translation>
</message>
<message>
<source>Color Dodge</source>
<translation>피하기</translation>
</message>
<message>
<source>Color Burn</source>
<translation>태우기</translation>
</message>
<message>
<source>Hue</source>
<translation>색조</translation>
</message>
<message>
<source>Saturation</source>
<translation>채도</translation>
</message>
<message>
<source>Color</source>
<translation>색상</translation>
</message>
<message>
<source>Luminosity</source>
<translation>광도</translation>
</message>
<message>
<source>Offsets</source>
<translation>옵셋</translation>
</message>
<message>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<source>Scaling</source>
<translation>비율</translation>
</message>
<message>
<source>Rotation</source>
<translation>회전</translation>
</message>
<message>
<source>Angle</source>
<translation>각도</translation>
</message>
<message>
<source>Pattern</source>
<translation>패턴</translation>
</message>
<message>
<source>Exclusion</source>
<translation>제외</translation>
</message>
<message>
<source>X-Scale:</source>
<translation>X비율:</translation>
</message>
<message>
<source>Y-Scale:</source>
<translation>Y비율:</translation>
</message>
<message>
<source>Display only used Colors</source>
<translation>사용된 색상만 표시</translation>
</message>
<message>
<source>Display all colors from the document color list, or only the already used colors</source>
<translation>문서 색상 몱록에서 모든 색상 또는 현재 사용되는 색깔만 나타내기</translation>
</message>
</context>
<context>
<name>CreateRange</name>
<message>
<source>Create Range</source>
<translation>범위 생성</translation>
</message>
<message>
<source>Number of Pages in Document:</source>
<translation>문서 페이지 번호:</translation>
</message>
<message>
<source>Doc Page Range</source>
<translation>문서 페이지 범위</translation>
</message>
<message>
<source>Basic Range Selection</source>
<translation>기본 범위 선택</translation>
</message>
<message>
<source>Range of Pages</source>
<translation>페이지 범위</translation>
</message>
<message>
<source>De&amp;lete</source>
<translation>삭제(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Move &amp;Down</source>
<translation>아래로 이동(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>Move &amp;Up</source>
<translation>위로 이동(&amp;U)</translation>
</message>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>Add a Range of Pages</source>
<translation>페이지 범위 더하기</translation>
</message>
<message>
<source>Consecutive Pages</source>
<translation>연속 페이지</translation>
</message>
<message>
<source>Even Pages</source>
<translation>짝수 페이지</translation>
</message>
<message>
<source>From:</source>
<translation>부터:</translation>
</message>
<message>
<source>To:</source>
<translation>까지:</translation>
</message>
<message>
<source>&amp;Add To Range</source>
<translation>범위에 더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>Odd Pages</source>
<translation>홀수 페이지</translation>
</message>
<message>
<source>Comma Separated List</source>
<translation>쉼표로 구분된 목록</translation>
</message>
<message>
<source>Advanced Reordering</source>
<translation>자세한 정렬</translation>
</message>
<message>
<source>Page Order</source>
<translation>페이지 순서</translation>
</message>
<message>
<source>Sample Page Order:</source>
<translation>샘플 페이지 순서:</translation>
</message>
<message>
<source>Page Group Size:</source>
<translation>페이지 그룹 크기:</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>확인(&amp;O)</translation>
</message>
<message>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
</context>
<context>
<name>CreateRangeBase</name>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>De&amp;lete</source>
<translation>삭제(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Advanced Reordering</source>
<translation>부가 순서</translation>
</message>
<message>
<source>Page Group Size:</source>
<translation>페이지그룹 크기:</translation>
</message>
<message>
<source>Sample Page Order:</source>
<translation>단순 페이지 순서:</translation>
</message>
<message>
<source>Page Order</source>
<translation>페이지 순서</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>확인(&amp;O)</translation>
</message>
<message>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
</context>
<context>
<name>CsvDialog</name>
<message>
<source>CSV Importer Options</source>
<translation>CSV 들여오기 설정</translation>
</message>
<message>
<source>Field delimiter:</source>
<translation>필드 구분자:</translation>
</message>
<message>
<source>(TAB)</source>
<translation>(탭)</translation>
</message>
<message>
<source>Value delimiter:</source>
<translation>값 구분자:</translation>
</message>
<message>
<source>First row is a header</source>
<translation>첫 번째 행이 헤더임</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>None</source>
<comment>delimiter</comment>
<translation>없음</translation>
</message>
</context>
<context>
<name>CupsOptions</name>
<message>
<source>Printer Options</source>
<translation>프린터 설정</translation>
</message>
<message>
<source>Page Set</source>
<translation>페이지 설정</translation>
</message>
<message>
<source>All Pages</source>
<translation>전체 페이지</translation>
</message>
<message>
<source>Even Pages only</source>
<translation>짝수 페이지만</translation>
</message>
<message>
<source>Odd Pages only</source>
<translation>홀수 페이지만</translation>
</message>
<message>
<source>Orientation</source>
<translation>방향</translation>
</message>
<message>
<source>Portrait</source>
<translation>세로방향</translation>
</message>
<message>
<source>Landscape</source>
<translation>가로방향</translation>
</message>
<message>
<source>N-Up Printing</source>
<translation>집약인쇄</translation>
</message>
<message>
<source>Page per Sheet</source>
<translation>시트 당 페이지</translation>
</message>
<message>
<source>Pages per Sheet</source>
<translation>시트 당 페이지</translation>
</message>
<message>
<source>Option</source>
<translation>설정</translation>
</message>
<message>
<source>Value</source>
<translation>값</translation>
</message>
<message>
<source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help > About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
<translation>이 패널에서 인쇄시 각종 CUPS 옵션을 표시합니다. 사용할 수 있는 정확한 매개 변수는 프린터 드라이버에 따라 다릅니다. "도움말 > Scribus에 대하여"를 선택하여 CUPS를 지원을 확인할 수 있습니다. 목록을 참조 : CCT는 C = CUPS C = littlecms T = TIFF 지원과 동일합니다. 지원 라이브러리가없는 경우는 *로 표시됩니다.</translation>
</message>
<message>
<source>Mirror</source>
<translation>미러</translation>
</message>
</context>
<context>
<name>CurveWidget</name>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>Curve Files (*.scu);;All Files (*)</source>
<translation>곡선 파일 (*.scu);;전체 파일 (*)</translation>
</message>
<message>
<source>Save as</source>
<translation>다른 이름으로 저장</translation>
</message>
<message>
<source>Cannot write the file:
%1</source>
<translation>파일을 쓸 수 없음:
%1</translation>
</message>
<message>
<source>Inverts the curve</source>
<translation>곡선을 반전</translation>
</message>
<message>
<source>Resets the curve</source>
<translation>곡선을 초기화</translation>
</message>
<message>
<source>Switches between linear and cubic interpolation of the curve</source>
<translation>곡선의 직선 및 3 차 보간 사이에서 전환</translation>
</message>
<message>
<source>Loads a curve</source>
<translation>곡선 읽어오기</translation>
</message>
<message>
<source>Saves this curve</source>
<translation>이 곡선을 저장</translation>
</message>
</context>
<context>
<name>CustomFDialog</name>
<message>
<source>&amp;Compress File</source>
<translation>파일 압축(&amp;C)</translation>
</message>
<message>
<source>&amp;Include Fonts</source>
<translation>글꼴 포함(&amp;I)</translation>
</message>
<message>
<source>Encoding:</source>
<translation>암호화:</translation>
</message>
<message>
<source>Show Preview</source>
<translation>미리보기 보이기</translation>
</message>
<message>
<source>&amp;Include Color Profiles</source>
<translation>색상 속성 포함(&amp;I)</translation>
</message>
<message>
<source>Show a preview and information for the selected file</source>
<translation>선택 파일의 미리보기 및 정보를 보이기</translation>
</message>
<message>
<source>Compress the Scribus document on save</source>
<translation>저장시 Scribus 문서를 압축</translation>
</message>
<message>
<source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
<translation>문서의 파일을 수집 중 글꼴을 포함. 수집하고 재분배를 위한 임의 글꼴에 대한 라이센스 정보를 알아야 합니다.</translation>
</message>
<message>
<source>Include color profiles when collecting files for the document</source>
<translation>문서의 파일을 줒집 중 색상 프로파일을 포함</translation>
</message>
</context>
<context>
<name>DashEditor</name>
<message>
<source>Value:</source>
<translation>값:</translation>
</message>
<message>
<source>Offset:</source>
<translation>옵셋:</translation>
</message>
</context>
<context>
<name>DeferredTask</name>
<message>
<source>Cancelled by user</source>
<translation>사용자에 의한 취소</translation>
</message>
</context>
<context>
<name>DelColor</name>
<message>
<source>Delete Color</source>
<translation>색상 삭제</translation>
</message>
<message>
<source>Delete Color:</source>
<translation>색상 삭제:</translation>
</message>
<message>
<source>Replace With:</source>
<translation>치환:</translation>
</message>
</context>
<context>
<name>DelPages</name>
<message>
<source>Delete Pages</source>
<translation>페이지 삭제</translation>
</message>
<message>
<source>Delete From:</source>
<translation>삭제:</translation>
</message>
<message>
<source>to:</source>
<translation>to:</translation>
</message>
</context>
<context>
<name>DelStyle</name>
<message>
<location filename="../editformats.cpp" line="36"/>
<source>Delete Style</source>
<translation>스타일 삭제</translation>
</message>
<message>
<location filename="../editformats.cpp" line="42"/>
<source>Delete Style:</source>
<translation>스타일 삭제:</translation>
</message>
<message>
<location filename="../editformats.cpp" line="46"/>
<source>Replace With:</source>
<translation>치환:</translation>
</message>
<message>
<location filename="../editformats.cpp" line="49"/>
<source>No Style</source>
<translation>스타일 없음</translation>
</message>
</context>
<context>
<name>DocIm</name>
<message>
<source>Importing failed</source>
<translation>들여오기 실패</translation>
</message>
<message>
<source>Importing Word document failed
%1</source>
<translation>Word 문서를 들여오는 데 실패
%1</translation>
</message>
</context>
<context>
<name>DocInfos</name>
<message>
<source>Document Information</source>
<translation>문서 정보</translation>
</message>
<message>
<source>&amp;Title:</source>
<translation>제목(&amp;T):</translation>
</message>
<message>
<source>&amp;Author:</source>
<translation>저작자(&amp;A):</translation>
</message>
<message>
<source>&amp;Keywords:</source>
<translation>주제어(&amp;K):</translation>
</message>
<message>
<source>Descri&amp;ption:</source>
<translation>해설(&amp;P):</translation>
</message>
<message>
<source>P&amp;ublisher:</source>
<translation>게시자(&amp;U):</translation>
</message>
<message>
<source>&amp;Contributors:</source>
<translation>기여자(&amp;C):</translation>
</message>
<message>
<source>Dat&amp;e:</source>
<translation>날짜(&amp;E):</translation>
</message>
<message>
<source>T&amp;ype:</source>
<translation>형태(&amp;Y):</translation>
</message>
<message>
<source>F&amp;ormat:</source>
<translation>형식(&amp;O):</translation>
</message>
<message>
<source>Identi&amp;fier:</source>
<translation>식별자(&amp;F):</translation>
</message>
<message>
<source>&amp;Source:</source>
<translation>소스(&amp;S):</translation>
</message>
<message>
<source>&amp;Language:</source>
<translation>언어(&amp;L):</translation>
</message>
<message>
<source>&amp;Relation:</source>
<translation>관련(&amp;R):</translation>
</message>
<message>
<source>Co&amp;verage:</source>
<translation>범위(&amp;V):</translation>
</message>
<message>
<source>Ri&amp;ghts:</source>
<translation>권리(&amp;G):</translation>
</message>
<message>
<source>Documen&amp;t</source>
<translation>문서(&amp;T)</translation>
</message>
<message>
<source>Further &amp;Information</source>
<translation>자세한 정보(&amp;I)</translation>
</message>
<message>
<source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation>개인이나 조직이 첫째로 문서 제작 책임이 있음. 이 객체은 PDF 메타 자료 뿐만 아니라 참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
</message>
<message>
<source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
<translation>문서에 주어진 이름. 이 객체는 PDF 메타 자료 뿐만 아니라 참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
</message>
<message>
<source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
<translation>문서 내용 설명. 이 객체는 간략한 설명 또는 문서의 요약. 출력시 PDF에서 중복될 수 있음</translation>
</message>
<message>
<source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
<translation>문서 내용의 주제. 이 객체는 문서에서 PDF에서 끼워넣는 핵심에서, 찾기와 PDF파일 인덱싱을 도와준다.</translation>
</message>
<message>
<source>A person or organisation responsible for making the document available</source>
<translation>자료를 활용가능하도록 만들 책임이 있는 사람이나 조직체</translation>
</message>
<message>
<source>A person or organisation responsible for making contributions to the content of the document</source>
<translation>문서 내용에 기여를 할 책임이 있는 사람이나 조직체</translation>
</message>
<message>
<source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
<translation>ISO 8601에 따라 YYYY-MM-DD 형식 내 문서의 사용 기간 중 이벤트와 연관된 날짜</translation>
</message>
<message>
<source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
<translation>문서 내용의 요소 또는 장르, 즉 카테고리, 함수, 장르등</translation>
</message>
<message>
<source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
<translation>문서의 물리적 또는 디지탈 명시. 미디어 형태 및 차원은 중요하지 않음. MIME 형태를 위한 RFC2045,RFC2046 는 여기에서 유용함.</translation>
</message>
<message>
<source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
<translation>ISBN 또는 URI와 같은 주어진 내용내의 문서에 대한 정확한 참고 자료</translation>
</message>
<message>
<source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
<translation>ISBN 또는 URI와 같은 현재 문서가 파생된 참조자료</translation>
</message>
<message>
<source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
<translation>문서내용이 쓰여진 언어, 예를 들면 en-GB, fr-CH와 같이 하이픈과 ISO-3166 국가코드가 선택적으로 끝에 붙여지는 ISO-639 언어코드</translation>
</message>
<message>
<source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
<translation>관계 문서 참조, ISBN 또는 URI과 같이 형식적인 지시자를 사용하는 것이 가능함</translation>
</message>
<message>
<source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
<translation>문서 내용의 한계 또는 범위; 아마도 위치와 시간 그리고 영향 범위를 포함</translation>
</message>
<message>
<source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
<translation>문서 권리에 대한 정보, 예를 들어 저작권, 특허권, 상표권이 이에 해당</translation>
</message>
</context>
<context>
<name>DocSections</name>
<message>
<source>Document Sections</source>
<translation>문서 섹션</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>Shown</source>
<translation>표시</translation>
</message>
<message>
<source>From</source>
<translation>부터</translation>
</message>
<message>
<source>To</source>
<translation>까지</translation>
</message>
<message>
<source>Style</source>
<translation>스타일</translation>
</message>
<message>
<source>Start</source>
<translation>시작</translation>
</message>
</context>
<context>
<name>DocSectionsBase</name>
<message>
<source>Document Sections</source>
<translation>문서 섹션</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>From</source>
<translation>에서</translation>
</message>
<message>
<source>To</source>
<translation>로</translation>
</message>
<message>
<source>Style</source>
<translation>스타일</translation>
</message>
<message>
<source>Start</source>
<translation>시작</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>Shown</source>
<translation>보임</translation>
</message>
</context>
<context>
<name>DocumentItemAttributes</name>
<message>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>Relates To</source>
<translation>관계</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>Is Parent Of</source>
<translation>부모</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>Is Child Of</source>
<translation>자식</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>Text Frames</source>
<translation>텍스트 프레임</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>Image Frames</source>
<translation>이미지 프레임</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Boolean</source>
<translation>부울식</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Integer</source>
<translation>정수</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>String</source>
<translation>문자열</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="13"/>
<source>Document Item Attributes</source>
<translation>문서 객체 속성</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="26"/>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="31"/>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="36"/>
<source>Value</source>
<translation>값</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="41"/>
<source>Parameter</source>
<translation>매개변수</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="46"/>
<source>Relationship</source>
<translation>관계</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="51"/>
<source>Relationship To</source>
<translation>관련처</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.ui" line="56"/>
<source>Auto Add To</source>
<translation>자동 더하기</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>복사(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
<source>None</source>
<comment>relationship</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
<source>None</source>
<comment>auto add</comment>
<translation>없음</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>None</source>
<comment>types</comment>
<translation>없음</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<source>Value</source>
<translation>값</translation>
</message>
<message>
<source>Parameter</source>
<translation>매개변수</translation>
</message>
<message>
<source>Relationship</source>
<translation>관계</translation>
</message>
<message>
<source>Relationship To</source>
<translation>관련처</translation>
</message>
<message>
<source>Auto Add To</source>
<translation>자동 더하기</translation>
</message>
<message>
<location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
<source>Real Number</source>
<translation>실수</translation>
</message>
</context>
<context>
<name>DocumentItemAttributesBase</name>
<message>
<source>Document Item Attributes</source>
<translation>문서 객체 속성</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<source>Value</source>
<translation>값</translation>
</message>
<message>
<source>Parameter</source>
<translation>매개변수</translation>
</message>
<message>
<source>Relationship</source>
<translation>관계</translation>
</message>
<message>
<source>Relationship To</source>
<translation>관련처</translation>
</message>
<message>
<source>Auto Add To</source>
<translation>자동 더하기</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>복사(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>섹제(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>삭제(&amp;L)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
</context>
<context>
<name>EPSPlug</name>
<message>
<source>Importing File:
%1
failed!</source>
<translation>파일 들여오기:
%1
실패함!</translation>
</message>
<message>
<source>Fatal Error</source>
<translation>치명적 오류</translation>
</message>
<message>
<source>Converting Image:
%1
failed!</source>
<translation>이미지 변환 중:
%1
실패!</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="872"/>
<source>Error</source>
<translation>오류</translation>
</message>
<message>
<source>Analyzing PostScript:</source>
<translation>포스트스크립트 분석:</translation>
</message>
<message>
<source>Generating Items</source>
<translation>객체 생성</translation>
</message>
<message>
<source>Converting of %1 images failed!</source>
<translation>%1 이미지 변환 실패!</translation>
</message>
<message>
<source>Error</source>
<translation>오류</translation>
</message>
<message>
<source>Group%1</source>
<translation>그룹 %1</translation>
</message>
<message>
<source>Importing: %1</source>
<translation>들여오기: %1</translation>
</message>
</context>
<context>
<name>EditStyle</name>
<message>
<location filename="../edit1format.cpp" line="47"/>
<source>Edit Style</source>
<translation>스타일 편집</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="67"/>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="80"/>
<source>Character</source>
<translation>문자</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="272"/>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="239"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>None</source>
<translation>없음</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="200"/>
<source>Distances</source>
<translation>거리</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="209"/>
<source>Fixed Linespacing</source>
<translation>고정 줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="210"/>
<source>Automatic Linespacing</source>
<translation>자동 줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="211"/>
<source>Align to Baseline Grid</source>
<translation>기준선 격자 정렬</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="268"/>
<source>&amp;Lines:</source>
<translation>선(&amp;L):</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="274"/>
<source>Distance from Text:</source>
<translation>텍스트로부터 거리:</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="300"/>
<source>Tabulators and Indentation</source>
<translation>탭키 설정 및 들여쓰기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="324"/>
<source>Preview of the Paragraph Style</source>
<translation>문단 스타일 미리보기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="360"/>
<source>Name of your paragraph style</source>
<translation>문단 스타일 이름</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="361"/>
<source>Font of selected text or object</source>
<translation>선택된 텍스트나 객체 글꼴</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="362"/>
<source>Font Size</source>
<translation>글꼴 크기</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="363"/>
<source>Color of text fill</source>
<translation>텍스트 채움 색상</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="364"/>
<source>Color of text stroke</source>
<translation>텍스트 외곽선 색상</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="369"/>
<source>Spacing above the paragraph</source>
<translation>문단 위 여백</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="370"/>
<source>Spacing below the paragraph</source>
<translation></translation>
</message>
<message>
<location filename="../edit1format.cpp" line="373"/>
<source>Line Spacing</source>
<translation>줄 간격</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="375"/>
<source>Toggles sample text of this paragraph style</source>
<translation>이 문단 스타일의 예제 텍스트 토글</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>Name of the Style is not unique</source>
<translation>스타일 이름이 이미 있습니다</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="328"/>
<source>Background</source>
<translation>배경</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="371"/>
<source>Manual Tracking</source>
<translation>수동 탐색</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="372"/>
<source>Offset to baseline of characters</source>
<translation>문자 기준선까지 옵셋</translation>
</message>
<message>
<location filename="../edit1format.cpp" line="448"/>
<source>Auto</source>
<translation>자동</translation>
</message>
</context>
<context>
<name>EditToolBar</name>
<message>
<source>Edit</source>
<translation>편집</translation>
</message>
</context>
<context>
<name>Editor</name>
<message>
<source>Editor</source>
<translation>편집기</translation>
</message>
<message>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<source>&amp;Open...</source>
<translation>열기(&amp;O)...</translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation>다음 이름으로 저장(&amp;A)...</translation>
</message>
<message>
<source>&amp;Save and Exit</source>
<translation>저장 및 종료(&amp;S)</translation>
</message>
<message>
<source>&amp;Exit without Saving</source>
<translation>저장 없이 종료(&amp;E)</translation>
</message>
<message>
<source>&amp;Undo</source>
<translation>이전작업(&amp;U)</translation>
</message>
<message>
<source>&amp;Redo</source>
<translation>재실행(&amp;R)</translation>
</message>
<message>
<source>Cu&amp;t</source>
<translation>잘라내기(&amp;T)</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>복사(&amp;C)</translation>
</message>
<message>
<source>&amp;Paste</source>
<translation>붙여넣기(&amp;P)</translation>
</message>
<message>
<source>C&amp;lear</source>
<translation>제거(&amp;L)</translation>
</message>
<message>
<source>&amp;Get Field Names</source>
<translation>필드명 얻기(&amp;G)</translation>
</message>
<message>
<source>&amp;File</source>
<translation>파일(&amp;F)</translation>
</message>
<message>
<source>&amp;Edit</source>
<translation>편집(&amp;E)</translation>
</message>
<message>
<source>JavaScripts (*.js);;All Files (*)</source>
<translation>자바스크립트 (*.js);;전체 파일 (*)</translation>
</message>
<message>
<source>Ctrl+N</source>
<translation>Ctrl+N</translation>
</message>
<message>
<source>Ctrl+Z</source>
<translation>Ctrl+Z</translation>
</message>
<message>
<source>Ctrl+X</source>
<translation>Ctrl+X</translation>
</message>
<message>
<source>Ctrl+C</source>
<translation>Ctrl+C</translation>
</message>
<message>
<source>Ctrl-V</source>
<translation>Ctrl-V</translation>
</message>
</context>
<context>
<name>EffectsDialog</name>
<message>
<source>Image Effects</source>
<translation>이미지 효과</translation>
</message>
<message>
<source>Options:</source>
<translation>설정:</translation>
</message>
<message>
<source>Color:</source>
<translation>색상:</translation>
</message>
<message>
<source>Shade:</source>
<translation>음영:</translation>
</message>
<message>
<source>Brightness:</source>
<translation>밝기:</translation>
</message>
<message>
<source>Contrast:</source>
<translation>대비:</translation>
</message>
<message>
<source>Radius:</source>
<translation>반경:</translation>
</message>
<message>
<source>Value:</source>
<translation>명도:</translation>
</message>
<message>
<source>Posterize:</source>
<translation>포스터화:</translation>
</message>
<message>
<source>Available Effects</source>
<translation>이용가능한 효과</translation>
</message>
<message>
<source>Blur</source>
<translation>흐림</translation>
</message>
<message>
<source>Brightness</source>
<translation>밝기</translation>
</message>
<message>
<source>Colorize</source>
<translation>색상화</translation>
</message>
<message>
<source>Contrast</source>
<translation>대비</translation>
</message>
<message>
<source>Grayscale</source>
<translation>회색톤</translation>
</message>
<message>
<source>Invert</source>
<translation>반전</translation>
</message>
<message>
<source>Posterize</source>
<translation>포스터화</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1377"/>
<source>Sharpen</source>
<translation>강조</translation>
</message>
<message>
<source>&gt;&gt;</source>
<translation>&gt;&gt;</translation>
</message>
<message>
<source>&lt;&lt;</source>
<translation>&lt;&lt;</translation>
</message>
<message>
<source>Effects in use</source>
<translation>사용 중인 효과</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>Sharpen</source>
<translation>강조</translation>
</message>
<message>
<source>Color 1:</source>
<translation>색상 1:</translation>
</message>
<message>
<source>Color 2:</source>
<translation>색상 2:</translation>
</message>
<message>
<source>Color 3:</source>
<translation>색상 3:</translation>
</message>
<message>
<source>Color 4:</source>
<translation>색상 4:</translation>
</message>
<message>
<source>Duotone</source>
<translation>2색조</translation>
</message>
<message>
<source>Tritone</source>
<translation>3색조</translation>
</message>
<message>
<source>Quadtone</source>
<translation>4색조</translation>
</message>
<message>
<source>Curves</source>
<translation>곡선</translation>
</message>
</context>
<context>
<name>ExportBitmap</name>
<message>
<source>File exists. Overwrite?</source>
<translation>파일이 있습니다. 겹쳐쓰겠습니까?</translation>
</message>
<message>
<source>exists already. Overwrite?</source>
<translation>이미 있습니다. 겹쳐쓰겠습니까?</translation>
</message>
<message>
<source>Save as Image</source>
<translation>이미지 저장</translation>
</message>
<message>
<source>Insufficient memory for this image size.</source>
<translation>이 이미지 크기에 불충분한 메모리</translation>
</message>
<message>
<source>Error writing the output file(s).</source>
<translation>출력파일 쓰기 오류.</translation>
</message>
</context>
<context>
<name>ExportForm</name>
<message>
<source>Choose a Export Directory</source>
<translation>내보낼 폴더 선택</translation>
</message>
<message>
<source>Export as Image(s)</source>
<translation>이미지로 내보내기</translation>
</message>
<message>
<source>&amp;Export to Directory:</source>
<translation>내보내기 폴더(&amp;E):</translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation>바꾸기(&amp;H)...</translation>
</message>
<message>
<source>Options</source>
<translation>설정</translation>
</message>
<message>
<source>Image &amp;Type:</source>
<translation>이미지 형태(&amp;T):</translation>
</message>
<message>
<source>&amp;Quality:</source>
<translation>품질(&amp;Q):</translation>
</message>
<message>
<source>&amp;Resolution:</source>
<translation>해상도(&amp;R):</translation>
</message>
<message>
<source>&amp;Size:</source>
<translation>크기(&amp;S):</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source> dpi</source>
<translation> dpi</translation>
</message>
<message>
<source>Range</source>
<translation>범위</translation>
</message>
<message>
<source>&amp;Current page</source>
<translation>현재 페이지(&amp;C)</translation>
</message>
<message>
<source>&amp;All pages</source>
<translation>전체 페이지(&amp;A)</translation>
</message>
<message>
<source>&amp;Range</source>
<translation>범위(&amp;R)</translation>
</message>
<message>
<source>Export a range of pages</source>
<translation>페이지 지정범위 내보내기</translation>
</message>
<message>
<source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
<translation>콤마로 표시된 토큰 목록을 입력합니다.
토큰에서 *은 모든 페이지를,일정범위를 나타날 때는 1-5과 같이,
혹은 한 페이지 번호를 이용할 수 있습니다.</translation>
</message>
<message>
<source>Export all pages</source>
<translation>전체 페이지 내보내기</translation>
</message>
<message>
<source>Export only the current page</source>
<translation>현재 페이지만 내보내기</translation>
</message>
<message>
<source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
<translation>이미지의 해상도
화면상에는 72 dpi 이미지를 사용합니다</translation>
</message>
<message>
<source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
<translation>이미지의 크기. 100%에서는 변화없고,200%에서는 2배 커집니다。</translation>
</message>
<message>
<source>The quality of your images - 100% is the best, 1% the lowest quality</source>
<translation>이미지 품질 - 100%는 최고,1%는 최저의 품질입니다</translation>
</message>
<message>
<source>Available export formats</source>
<translation>사용가능한 내보내기 형식</translation>
</message>
<message>
<source>The output directory - the place to store your images.
Name of the export file will be 'documentname-pagenumber.filetype'</source>
<translation>출력 폴더 -이미지를 저장하는 장소.
출력 파일명은'문서명-페이지 번호.확장자'가 됩니다.</translation>
</message>
<message>
<source>Change the output directory</source>
<translation>출력 폴더 바꾸기</translation>
</message>
<message>
<source>Image size in Pixels</source>
<translation>화소단위 이미지 크기</translation>
</message>
<message>
<source>TextLabel</source>
<translation>텍스트 라벨</translation>
</message>
</context>
<context>
<name>ExtImageProps</name>
<message>
<source>Extended Image Properties</source>
<translation>확장 이미지 속성</translation>
</message>
<message>
<source>Normal</source>
<translation>보통</translation>
</message>
<message>
<source>Darken</source>
<translation>어둡게</translation>
</message>
<message>
<source>Lighten</source>
<translation>밝게</translation>
</message>
<message>
<source>Hue</source>
<translation>색조</translation>
</message>
<message>
<source>Saturation</source>
<translation>채도</translation>
</message>
<message>
<source>Color</source>
<translation>색상</translation>
</message>
<message>
<source>Luminosity</source>
<translation>광도</translation>
</message>
<message>
<source>Multiply</source>
<translation>곱하기</translation>
</message>
<message>
<source>Screen</source>
<translation>화면</translation>
</message>
<message>
<source>Dissolve</source>
<translation>디졸브</translation>
</message>
<message>
<source>Overlay</source>
<translation>중첩</translation>
</message>
<message>
<source>Hard Light</source>
<translation>아주 밝게</translation>
</message>
<message>
<source>Soft Light</source>
<translation>중간 밝게</translation>
</message>
<message>
<source>Difference</source>
<translation>차이</translation>
</message>
<message>
<source>Exclusion</source>
<translation>제외</translation>
</message>
<message>
<source>Color Dodge</source>
<translation>피하기</translation>
</message>
<message>
<source>Color Burn</source>
<translation>태우기</translation>
</message>
<message>
<source>Blend Mode:</source>
<translation>혼합 모드:</translation>
</message>
<message>
<source>Opacity:</source>
<translation>불투명도:</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>Layers</source>
<translation>레이어</translation>
</message>
<message>
<source>Don't use any Path</source>
<translation>임의 경로를 사용하지 마시오</translation>
</message>
<message>
<source>Paths</source>
<translation>경로</translation>
</message>
<message>
<source>Live Preview</source>
<translation>라이브 미리보기</translation>
</message>
</context>
<context>
<name>FDialogPreview</name>
<message>
<source>Size:</source>
<translation>크기:</translation>
</message>
<message>
<source>Resolution:</source>
<translation>해상도:</translation>
</message>
<message>
<source>DPI</source>
<translation>DPI</translation>
</message>
<message>
<source>Unknown</source>
<translation>미정</translation>
</message>
<message>
<source>Colorspace:</source>
<translation>색상공간:</translation>
</message>
<message>
<source>Title:</source>
<translation>제목:</translation>
</message>
<message>
<source>No Title</source>
<translation>제목 없음</translation>
</message>
<message>
<source>Author:</source>
<translation>저작자:</translation>
</message>
<message>
<source>Scribus Document</source>
<translation>Scribus 문서</translation>
</message>
<message>
<source>File Format:</source>
<translation>파일 형식:</translation>
</message>
</context>
<context>
<name>Farbmanager</name>
<message>
<source>Colors</source>
<translation>색상</translation>
</message>
<message>
<source>&amp;Import</source>
<translation>들여오기(&amp;I)</translation>
</message>
<message>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<source>&amp;Edit</source>
<translation>편집(&amp;E)</translation>
</message>
<message>
<source>D&amp;uplicate</source>
<translation>복제(&amp;U)</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>&amp;Remove Unused</source>
<translation>미사용 제거(&amp;R)</translation>
</message>
<message>
<source>Color Sets</source>
<translation>색상 모음</translation>
</message>
<message>
<source>Current Color Set:</source>
<translation>현재 색상 모음:</translation>
</message>
<message>
<source>&amp;Save Color Set</source>
<translation>색상 모음 저장(&amp;S)</translation>
</message>
<message>
<source>Choose a color set to load</source>
<translation>읽기위해 색상 모음 선택</translation>
</message>
<message>
<source>Save the current color set</source>
<translation>현재 색상 모음 저장</translation>
</message>
<message>
<source>Remove unused colors from current document&apos;s color set</source>
<translation>현재 문서에서 미사용 색상 제거</translation>
</message>
<message>
<source>Import colors to the current set from an existing document</source>
<translation>기존 문서로부터색상을 현재 모음으로 들여오기</translation>
</message>
<message>
<source>Create a new color within the current set</source>
<translation>현재 모음내에서 새 색상 생성</translation>
</message>
<message>
<source>Edit the currently selected color</source>
<translation>현재 선택 색상 편집</translation>
</message>
<message>
<source>Make a copy of the currently selected color</source>
<translation>현재 선택 색상의 사본 생성</translation>
</message>
<message>
<source>Delete the currently selected color</source>
<translation>현재 선택 색상을 삭제</translation>
</message>
<message>
<source>Make the current colorset the default color set</source>
<translation>현재 색상 모음을 기본 색상모음으로 만듦</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<source>Choose a Name</source>
<translation>이름 선택</translation>
</message>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation>문서 (*.sla *.sla.gz *.scd *.scd.gz);;전체 파일 (*)</translation>
</message>
<message>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation>문서 (*.sla *.scd);;전체 파일 (*)</translation>
</message>
<message>
<source>Copy of %1</source>
<translation>%1 복사</translation>
</message>
<message>
<source>New Color</source>
<translation>새 색상</translation>
</message>
<message>
<source>None</source>
<translation>없음</translation>
</message>
</context>
<context>
<name>FileLoader</name>
<message>
<source>Some fonts used by this document have been substituted:</source>
<translation>이 문서에서 사용되고 있는 몇개의 글꼴은 치환되었습니다:</translation>
</message>
<message>
<source> was replaced by: </source>
<translation>치환함: </translation>
</message>
</context>
<context>
<name>FileToolBar</name>
<message>
<source>File</source>
<translation>파일</translation>
</message>
</context>
<context>
<name>FontComboH</name>
<message>
<source>Face:</source>
<translation>인쇄면:</translation>
</message>
<message>
<source>Style:</source>
<translation>스타일:</translation>
</message>
</context>
<context>
<name>FontListModel</name>
<message>
<source>Font Name</source>
<translation>글꼴명</translation>
</message>
<message>
<source>Use Font</source>
<translation>글꼴 사용</translation>
</message>
<message>
<source>Family</source>
<translation>패밀리</translation>
</message>
<message>
<source>Style</source>
<translation>스타일</translation>
</message>
<message>
<source>Variant</source>
<translation>변이</translation>
</message>
<message>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<source>Format</source>
<translation>형식</translation>
</message>
<message>
<source>Embed in PostScript</source>
<translation>포스트스크립트에 내장</translation>
</message>
<message>
<source>Subset</source>
<translation>부분집합</translation>
</message>
<message>
<source>Access</source>
<translation>접근</translation>
</message>
<message>
<source>Used in Doc</source>
<translation>문서에서 사용 중</translation>
</message>
<message>
<source>Path to Font File</source>
<translation>글꼴 파일 경로</translation>
</message>
<message>
<source>Unknown</source>
<comment>font type</comment>
<translation>미정</translation>
</message>
<message>
<source>Unknown</source>
<comment>font format</comment>
<translation>미정</translation>
</message>
<message>
<source>User</source>
<comment>font preview</comment>
<translation>사용자</translation>
</message>
<message>
<source>System</source>
<comment>font preview</comment>
<translation>시스템</translation>
</message>
<message>
<source>Click to change the value</source>
<translation>값을 변경하기 위하여 클릭</translation>
</message>
</context>
<context>
<name>FontPrefs</name>
<message>
<source>Available Fonts</source>
<translation>이용 가능한 글꼴</translation>
</message>
<message>
<source>Font Substitutions</source>
<translation>글꼴 치환</translation>
</message>
<message>
<source>Additional Paths</source>
<translation>부가 경로</translation>
</message>
<message>
<source>&amp;Available Fonts</source>
<translation>이용 가능한 글꼴(&amp;A)</translation>
</message>
<message>
<source>Font Name</source>
<translation>글꼴 이름</translation>
</message>
<message>
<source>Replacement</source>
<translation>치환</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Font &amp;Substitutions</source>
<translation>글꼴 치환(&amp;S)</translation>
</message>
<message>
<source>C&amp;hange...</source>
<translation>바꾸기(&amp;H)...</translation>
</message>
<message>
<source>A&amp;dd...</source>
<translation>더하기(&amp;D)...</translation>
</message>
<message>
<source>&amp;Remove</source>
<translation>제거(&amp;R)</translation>
</message>
<message>
<source>Additional &amp;Paths</source>
<translation>부가 경로(&amp;P)</translation>
</message>
<message>
<source>Choose a Directory</source>
<translation>폴더 선택</translation>
</message>
<message>
<source>Font search paths can only be set in File > Preferences, and only when there is no document currently open. Close any open documents, then use File > Preferences > Fonts to change the font search path.</source>
<translation>글꼴 찾기 경로는 파일 > 기본설정에서 설정할 수 있습니다. 그리고 열린 문서가 현재 없을 때만 할 수 있습니다. 어떤 열린 문서를 닫고, 글꼴 찾기 경로를 변경하기 위하여 파일 > 기본설정 > 글꼴을 사용합니다.</translation>
</message>
</context>
<context>
<name>FontPreview</name>
<message>
<source>Font Name</source>
<comment>font preview</comment>
<translation>글꼴 이름</translation>
</message>
<message>
<source>Type</source>
<comment>font preview</comment>
<translation>형태</translation>
</message>
<message>
<source>Subset</source>
<comment>font preview</comment>
<translation>부분집합</translation>
</message>
<message>
<source>Access</source>
<comment>font preview</comment>
<translation>접근</translation>
</message>
<message>
<source>Font Size:</source>
<translation>글꼴 크기</translation>
</message>
<message>
<source>Fonts Preview</source>
<comment>font preview</comment>
<translation>글꼴 미리보기</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.ui" line="209"/>
<source>&amp;Append</source>
<translation>첨가하기(&amp;A)</translation>
</message>
<message>
<source>Alt+O</source>
<comment>font preview</comment>
<translation>Alt+O</translation>
</message>
<message>
<source>Quick Search: </source>
<translation>빠른 찾기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
<source>&amp;Search</source>
<translation>찾기(&amp;S)</translation>
</message>
<message>
<source>&amp;Close</source>
<comment>font preview</comment>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<comment>font preview</comment>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="164"/>
<source>Append selected font into Style, Font menu</source>
<comment>font preview</comment>
<translation>선택된 글꼴을 스타일, 글꼴 메뉴로 첨가하기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="112"/>
<source>Leave preview</source>
<comment>font preview</comment>
<translation>미리보기 종료</translation>
</message>
<message>
<source>Typing the text here provides quick searching in the font names. E.g. &apos;bold&apos; shows all fonts with Bold in name. Searching is case insensitive.</source>
<translation>텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 즉 &apos;bold&apos; 입력은 bold이름을 가진 모든 글꼴을 보여준다. 찾기는 대소문자 무시된다.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="114"/>
<source>Start searching</source>
<translation>찾기 시작</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="115"/>
<source>Size of the selected font</source>
<translation>선택 글꼴 크기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
<source>Woven silk pyjamas exchanged for blue quartz</source>
<comment>font preview</comment>
<translation>단지, 살아있음에 감사하며 행복을 느낍니다...</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="97"/>
<source>User</source>
<comment>font preview</comment>
<translation>사용자</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="98"/>
<source>System</source>
<comment>font preview</comment>
<translation>시스템</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="42"/>
<source>Font Name</source>
<translation>글꼴이름</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="44"/>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="45"/>
<source>Subset</source>
<translation>부분집합</translation>
</message>
<message>
<location filename="../plugins/fontpreview/fontpreview.cpp" line="46"/>
<source>Access</source>
<translation>접근</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="13"/>
<source>Fonts Preview</source>
<translation>글꼴 미리보기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="19"/>
<source>&amp;Quick Search:</source>
<translation>빠른 찾기(&amp;Q):</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="38"/>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="90"/>
<source>&amp;Font Size:</source>
<translation>글꼴 크기(&amp;F):</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="113"/>
<source>Text</source>
<translation>텍스트</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="123"/>
<source>Sample text to display</source>
<translation>보여질 예제 텍스트</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="130"/>
<source>Se&amp;t</source>
<translation>설정(&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="133"/>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="140"/>
<source>Reset the text</source>
<translation>텍스트 초기화</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="183"/>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="186"/>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="113"/>
<source>Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring.</source>
<translation>텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 찾기는 대소문자 무시된다. 주어진 텍스트는 부분 문자열로 취급됨</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="45"/>
<source>Show Extended Font Informations</source>
<translation>확장 글꼴 정보 보이기</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="143"/>
<source>&amp;Default</source>
<translation>기본값(&amp;D)</translation>
</message>
</context>
<context>
<name>FontPreviewBase</name>
<message>
<source>Fonts Preview</source>
<translation>글꼴 미리보기</translation>
</message>
<message>
<source>&amp;Search</source>
<translation>찾기(&amp;S)</translation>
</message>
<message>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<source>Font Name</source>
<translation>글꼴 이름</translation>
</message>
<message>
<source>Type</source>
<translation>형태</translation>
</message>
<message>
<source>Subset</source>
<translation>부분집합</translation>
</message>
<message>
<source>Access</source>
<translation>접근</translation>
</message>
<message>
<source>&amp;Font Size:</source>
<translation>글꼴 크기(&amp;F):</translation>
</message>
<message>
<source>Text</source>
<translation>텍스트</translation>
</message>
<message>
<source>Sample text to display</source>
<translation>보여질 예제 텍스트</translation>
</message>
<message>
<source>&amp;Append</source>
<translation>추가하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
</context>
<context>
<name>FontPreviewPlugin</name>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
<source>&amp;Font Preview...</source>
<translation>글꼴 미리보기(&amp;F)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="66"/>
<source>Font Preview dialog</source>
<translation>글꼴 미리보기 대화창</translation>
</message>
<message>
<location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="67"/>
<source>Sorting, searching and browsing available fonts.</source>
<translation>이용 가능한 글꼴의 정렬, 찾기</translation>
</message>
</context>
<context>
<name>FontReplaceDialog</name>
<message>
<source>Font Substitution</source>
<translation>글꼴 치환</translation>
</message>
<message>
<source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
<translation>이 문서는 시스템에 사용되지 않는 글꼴을 기지고 있으므로, 적절한 대체 글꼴을 선택하시오. 취소하면, 문서 읽기를 중지합니다.</translation>
</message>
<message>
<source>Original Font</source>
<translation>초기 글꼴</translation>
</message>
<message>
<source>Substitution Font</source>
<translation>글꼴 치환</translation>
</message>
<message>
<source>Make these substitutions permanent</source>
<translation>계속 치환</translation>
</message>
<message>
<source>Cancels these font substitutions and stops loading the document.</source>
<translation>글꼴 치환을 취소시키고, 문서 읽기를 그만 둠.</translation>
</message>
<message>
<source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit > Preferences > Fonts.</source>
<translation>이것의 사용은 Scribus가 계속 앞으로의 작업에서 없는 글꼴에 대한 대체물로 이용할 수 있습니다. 이것은 파일 - 기본 설정 - 글꼴에서 되돌리거나 변경할 수 있습니다.</translation>
</message>
<message>
<source>If you select OK, then save, these substitutions are made permanent in the document.</source>
<translation>확인를 눌러 저장하면, 그 변환은 영구적으로 저장됩니다.</translation>
</message>
</context>
<context>
<name>GradientEditor</name>
<message>
<source>Position:</source>
<translation>위치:</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>Add, change or remove color stops here</source>
<translation>색상 눈금을 더하기, 변경하기 또는 제거하기</translation>
</message>
</context>
<context>
<name>GradientVectorDialog</name>
<message>
<source>Gradient Vector</source>
<translation>그라디언트 벡터</translation>
</message>
</context>
<context>
<name>GuideManager</name>
<message>
<source>Manage Guides</source>
<translation>안내선 관리</translation>
</message>
<message>
<source>Horizontal Guides</source>
<translation>수평 안내선</translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation>Y 위치(&amp;Y):</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>D&amp;elete</source>
<translation>삭제(&amp;E)</translation>
</message>
<message>
<source>Vertical Guides</source>
<translation>수직 안내선</translation>
</message>
<message>
<source>&amp;X-Pos:</source>
<translation>X 위치(&amp;X):</translation>
</message>
<message>
<source>A&amp;dd</source>
<translation>더하기(&amp;D)</translation>
</message>
<message>
<source>De&amp;lete</source>
<translation>삭제(&amp;L)</translation>
</message>
<message>
<source>&amp;Page</source>
<translation>페이지(&amp;P)</translation>
</message>
<message>
<source>&amp;Lock Guides</source>
<translation>안내선 잠금(&amp;L)</translation>
</message>
<message>
<source>&amp;Single</source>
<translation>개별 설정</translation>
</message>
<message>
<source>Horizontals</source>
<translation>수평선</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<source>Verticals</source>
<translation>수직선</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>Appl&amp;y to All Pages</source>
<translation>전체 페이지 적용(&amp;Y)</translation>
</message>
<message>
<source>Alt+Y</source>
<translation>Alt+Y</translation>
</message>
<message>
<source>&amp;Column/Row</source>
<translation>행/열(&amp;C)</translation>
</message>
<message>
<source>&amp;Number:</source>
<translation>숫자(&amp;N):</translation>
</message>
<message>
<source>U&amp;se Gap:</source>
<translation>간격 사용(&amp;S):</translation>
</message>
<message>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<source>Refer To</source>
<translation>기준</translation>
</message>
<message>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<source>M&amp;argins</source>
<translation>여백(&amp;A)</translation>
</message>
<message>
<source>S&amp;election</source>
<translation>선택(&amp;E):</translation>
</message>
<message>
<source>Nu&amp;mber:</source>
<translation>숫자(&amp;M):</translation>
</message>
<message>
<source>Use &amp;Gap:</source>
<translation>간격 사용(&amp;G):</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>&amp;Misc</source>
<translation>안내선 삭제(&amp;M)</translation>
</message>
<message>
<source>Delete all guides from the current page</source>
<translation>현재 페이지에서 전체 안내선 제거</translation>
</message>
<message>
<source>Delete Guides from Current &amp;Page</source>
<translation>현재 페이지에서 안내선 제거(&amp;P)</translation>
</message>
<message>
<source>Delete all guides from the current document</source>
<translation>현재 문서에서 전체 안내선 제거</translation>
</message>
<message>
<source>Delete Guides from &amp;All Pages</source>
<translation>전체 문서에서 안내선 제거(&amp;A)</translation>
</message>
<message>
<source>Guide Manager</source>
<translation>안내선 관리자</translation>
</message>
</context>
<context>
<name>GuideManagerBase</name>
<message>
<source>Manage Guides</source>
<translation>안내선 관리</translation>
</message>
<message>
<source>Guide</source>
<translation>안내선</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>D&amp;elete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<source>A&amp;dd</source>
<translation>더하기(&amp;D)</translation>
</message>
<message>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<source>De&amp;lete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<source>&amp;Lock Guides</source>
<translation>안내선 잠금(&amp;L)</translation>
</message>
<message>
<source>Appl&amp;y to All Pages</source>
<translation>전체 페이지에 적용(&amp;Y)</translation>
</message>
<message>
<source>Alt+Y</source>
<translation>Alt+Y</translation>
</message>
<message>
<source>&amp;Number:</source>
<translation>번호(&amp;N):</translation>
</message>
<message>
<source>&amp;Page</source>
<translation>페이지(&amp;P)</translation>
</message>
<message>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
</context>
<context>
<name>HelpBrowser</name>
<message>
<source>&amp;Contents</source>
<translation>내용(&amp;C)</translation>
</message>
<message>
<source>&amp;Search</source>
<translation>찾기(&amp;S)</translation>
</message>
<message>
<source>Se&amp;arch</source>
<translation>찾기(&amp;A)</translation>
</message>
<message>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>Book&amp;marks</source>
<translation>북마크(&amp;M)</translation>
</message>
<message>
<source>&amp;Print...</source>
<translation>인쇄(&amp;P)...</translation>
</message>
<message>
<source>&amp;Find...</source>
<translation>찾기(&amp;F)...</translation>
</message>
<message>
<source>D&amp;elete All</source>
<translation>전체 삭제(&amp;E)</translation>
</message>
<message>
<source>Scribus Help</source>
<translation>Scribus 도움말</translation>
</message>
<message>
<source>Searching is case insensitive</source>
<translation>찾기는 대소문자를 무시</translation>
</message>
<message>
<source>1</source>
<translation>1</translation>
</message>
<message>
<source>&amp;Exit</source>
<translation>종료(&amp;E)</translation>
</message>
<message>
<source>Find &amp;Next...</source>
<translation>다음 찾기(&amp;N)...</translation>
</message>
<message>
<source>Find &amp;Previous...</source>
<translation>이전 찾기(&amp;P)...</translation>
</message>
<message>
<source>&amp;Add</source>
<translation>더하기(&amp;A)</translation>
</message>
</context>
<context>
<name>HelpBrowser2</name>
<message>
<location filename="../ui/hb2.ui" line="30"/>
<source>&amp;Contents</source>
<translation>내용(&amp;C)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="49"/>
<source>Se&amp;arch</source>
<translation>찾기(&amp;S)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="64"/>
<source>&amp;Search</source>
<translation>찾기(&amp;S)</translation>
</message>
<message>
<location filename="../ui/hb2.ui" line="77"/>
<source>Book&amp;marks</source>
<translation>북마크(&amp;M)</translation>
</message>
</context>
<context>
<name>HyAsk</name>
<message>
<source>Possible Hyphenation</source>
<translation>이용가능한 하이픈</translation>
</message>
<message>
<source>Accept</source>
<translation>허용</translation>
</message>
<message>
<source>Skip</source>
<translation>건너뛰기</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
<message>
<source>Add to the
Exception List</source>
<translation>예외 목록에 더하기</translation>
</message>
<message>
<source>Add to the
Ignore List</source>
<translation>무시 목록에 더하기</translation>
</message>
</context>
<context>
<name>HySettings</name>
<message>
<source>Ignore List</source>
<translation>무시 목록</translation>
</message>
<message>
<source>Add a new Entry</source>
<translation>새 객체 더하기</translation>
</message>
<message>
<source>Edit Entry</source>
<translation>객체 편집</translation>
</message>
<message>
<source>Exception List</source>
<translation>예외 목록</translation>
</message>
</context>
<context>
<name>ImageInfoDialog</name>
<message>
<source>Image Info</source>
<translation>이미지 정보</translation>
</message>
<message>
<source>General Info</source>
<translation>일반 정보</translation>
</message>
<message>
<source>Date / Time:</source>
<translation>날짜 / 시간:</translation>
</message>
<message>
<source>Has Embedded Profile:</source>
<translation>내장 프로파일 있음:</translation>
</message>
<message>
<source>Profile Name:</source>
<translation>프로파일 이름:</translation>
</message>
<message>
<source>Has Embedded Paths:</source>
<translation>내장 경로 있음:</translation>
</message>
<message>
<source>Has Layers:</source>
<translation>레이어 있음:</translation>
</message>
<message>
<source>EXIF Info</source>
<translation>EXIF 정보</translation>
</message>
<message>
<source>Artist:</source>
<translation>아티스트:</translation>
</message>
<message>
<source>Comment:</source>
<translation>설명:</translation>
</message>
<message>
<source>User Comment:</source>
<translation>사용자 설명:</translation>
</message>
<message>
<source>Camera Model:</source>
<translation>카메라 모델:</translation>
</message>
<message>
<source>Camera Manufacturer:</source>
<translation>카메라 제조사:</translation>
</message>
<message>
<source>Description:</source>
<translation>설명:</translation>
</message>
<message>
<source>Copyright:</source>
<translation>저작권:</translation>
</message>
<message>
<source>Scanner Model:</source>
<translation>스캐너 모델:</translation>
</message>
<message>
<source>Scanner Manufacturer:</source>
<translation>스캐너 제조사:</translation>
</message>
<message>
<source>Exposure time</source>
<translation>노출 시간</translation>
</message>
<message>
<source>Aperture:</source>
<translation>鮮明に見える範囲:</translation>
</message>
<message>
<source>ISO equiv.:</source>
<translation>ISO 감도:</translation>
</message>
</context>
<context>
<name>ImportAIPlugin</name>
<message>
<source>Import AI...</source>
<translation>AI 들여오기...</translation>
</message>
<message>
<source>Imports Illustrator Files</source>
<translation>일러스트레이트 파일 들여오기</translation>
</message>
<message>
<source>Imports most Illustrator files into the current document,
converting their vector data into Scribus objects.</source>
<translation>일러스트레이트 파일을 현재 문서로 읽어오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
</message>
<message>
<source>The file could not be imported</source>
<translation>파일을 들여올 수 없습니다</translation>
</message>
</context>
<context>
<name>ImportDialog</name>
<message>
<location filename="../smstyleimport.cpp" line="30"/>
<source>Choose Styles</source>
<translation>스타일 선택</translation>
</message>
<message>
<location filename="../smstyleimport.cpp" line="35"/>
<source>Available Styles</source>
<translation>이용 가능한 스타일</translation>
</message>
<message>
<location filename="../smstyleimport.cpp" line="49"/>
<source>Paragraph Styles</source>
<translation>문단 스타일</translation>
</message>
</context>
<context>
<name>ImportPSPlugin</name>
<message>
<source>Import PostScript...</source>
<translation>포스트스크립트 들여오기...</translation>
</message>
<message>
<source>Imports PostScript Files</source>
<translation>포스트스크립트 파일 들여오기</translation>
</message>
<message>
<source>Imports most PostScript files into the current document,
converting their vector data into Scribus objects.</source>
<translation>포스트스크립트 파일을 현재 문서로 들여오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
</message>
</context>
<context>
<name>ImportXfigPlugin</name>
<message>
<source>Import Xfig...</source>
<translation>Xfig 들여오기...</translation>
</message>
<message>
<source>Imports Xfig Files</source>
<translation>Xfig 파일 들여오기</translation>
</message>
<message>
<source>Imports most Xfig files into the current document,
converting their vector data into Scribus objects.</source>
<translation>Xfig 파일을 현재 문서로 들여오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
</message>
<message>
<source>All Supported Formats</source>
<translation>전체 지원 형식</translation>
</message>
</context>
<context>
<name>Imposition</name>
<message>
<source>Portrait</source>
<translation>세로 방향</translation>
</message>
<message>
<source>Landscape</source>
<translation>가로 방향</translation>
</message>
</context>
<context>
<name>ImpositionBase</name>
<message>
<source>Imposition</source>
<translation>정판</translation>
</message>
<message>
<source>Gri&amp;d</source>
<translation>격자(&amp;D)</translation>
</message>
<message>
<source>Copies</source>
<translation>부수</translation>
</message>
<message>
<source>Do&amp;uble sided</source>
<translation>양면(&amp;U)</translation>
</message>
<message>
<source>Alt+U</source>
<translation>Alt+U</translation>
</message>
<message>
<source>Front side</source>
<translation>정면</translation>
</message>
<message>
<source>Back side</source>
<translation>뒷면</translation>
</message>
<message>
<source>&amp;Booklet</source>
<translation>소책자(&amp;B)</translation>
</message>
<message>
<source>Pages per sheet</source>
<translation>시트당 페이지</translation>
</message>
<message>
<source>4</source>
<translation>4</translation>
</message>
<message>
<source>8</source>
<translation>8</translation>
</message>
<message>
<source>16</source>
<translation>16</translation>
</message>
<message>
<source>Pages</source>
<translation>페이지</translation>
</message>
<message>
<source>&lt;html>&lt;head>&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; />&lt;style type=&quot;text/css&quot;>
p, li { white-space: pre-wrap; }
&lt;/style>&lt;/head>&lt;body style=&quot; font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;&quot;>
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;>Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.&lt;/p>&lt;/body>&lt;/html></source>
<translation type="unfinished" />
</message>
<message>
<source>Fold</source>
<translation>접힘</translation>
</message>
<message>
<source>Front page from</source>
<translation>정면 페이지</translation>
</message>
<message>
<source>Double sided</source>
<translation>양면</translation>
</message>
<message>
<source>Back page from</source>
<translation>뒷면 페이지</translation>
</message>
<message>
<source>Destination page</source>
<translation>목표 페이지</translation>
</message>
<message>
<source>Size</source>
<translation>크기</translation>
</message>
<message>
<source>Orientation</source>
<translation>방향</translation>
</message>
<message>
<source>Width</source>
<translation>너비</translation>
</message>
<message>
<source>Height</source>
<translation>높이</translation>
</message>
<message>
<source>Preview</source>
<translation>미리보기</translation>
</message>
<message>
<source>Refresh preview</source>
<translation>미리보기 업데이트</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>완료(&amp;O)</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
</context>
<context>
<name>ImpositionPlugin</name>
<message>
<source>&amp;Imposition...</source>
<translation>정판...(&amp;I)</translation>
</message>
<message>
<source>Imposition dialog</source>
<translation>정판 대화창</translation>
</message>
<message>
<source>Imposition on grids, booklets and folds</source>
<translation>격자,소책자와 접힘 정판</translation>
</message>
</context>
<context>
<name>InsPage</name>
<message>
<source>Insert Page</source>
<translation>페이지 삽입</translation>
</message>
<message>
<source>&amp;Insert</source>
<translation>삽입(&amp;I)</translation>
</message>
<message>
<source>Page(s)</source>
<translation>페이지</translation>
</message>
<message>
<source>before Page</source>
<translation>페이지 이전</translation>
</message>
<message>
<source>after Page</source>
<translation>페이지 이후</translation>
</message>
<message>
<source>at End</source>
<translation>마지막에</translation>
</message>
<message>
<source>Master Pages</source>
<translation>마스터 페이지</translation>
</message>
<message>
<source>&amp;Master Page:</source>
<translation>마스터 페이지(&amp;M):</translation>
</message>
<message>
<source>Page Size</source>
<translation>페이지 크기</translation>
</message>
<message>
<source>&amp;Size:</source>
<translation>크기(&amp;S):</translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation>방향(&amp;N):</translation>
</message>
<message>
<source>Portrait</source>
<translation>세로 방향</translation>
</message>
<message>
<source>Landscape</source>
<translation>가로 방향</translation>
</message>
<message>
<source>&amp;Width:</source>
<translation>너비(&amp;W):</translation>
</message>
<message>
<source>&amp;Height:</source>
<translation>높이(&amp;H):</translation>
</message>
<message>
<source>Move Objects with their Page</source>
<translation>페이지의 객체 이동</translation>
</message>
</context>
<context>
<name>InsertAFrame</name>
<message>
<source>Insert A Frame</source>
<translation>프레임 삽입</translation>
</message>
<message>
<source>T&amp;ype</source>
<translation>형태(&amp;Y)</translation>
</message>
<message>
<source>&amp;Text Frame</source>
<translation>텍스트 프레임(&amp;T)</translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation>이미지 프레임(&amp;I)</translation>
</message>
<message>
<source>&amp;Location</source>
<translation>위치(&amp;L)</translation>
</message>
<message>
<source>Page Placement</source>
<translation>페이지 위치</translation>
</message>
<message>
<source>Current Page</source>
<translation>현재 페이지</translation>
</message>
<message>
<source>All Pages</source>
<translation>전체 페이지</translation>
</message>
<message>
<source>...</source>
<translation>...</translation>
</message>
<message>
<source>Position of Frame</source>
<translation>프레임 위치</translation>
</message>
<message>
<source>Top Left of Margins</source>
<translation>여백 왼쪽 위</translation>
</message>
<message>
<source>Top Left of Page</source>
<translation>페이지 왼쪽 위</translation>
</message>
<message>
<source>Top Left of Bleed</source>
<translation>물림재단 왼쪽 위</translation>
</message>
<message>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<source>&amp;Size</source>
<translation>크기(&amp;S)</translation>
</message>
<message>
<source>Same as the Page Margins</source>
<translation>페이지 여백과 같음</translation>
</message>
<message>
<source>Same as the Page</source>
<translation>페이지와 같음</translation>
</message>
<message>
<source>Same as the Bleed</source>
<translation>물림재단과 같음</translation>
</message>
<message>
<source>Same as the Imported Image</source>
<translation>들여온 이미지와 같음</translation>
</message>
<message>
<source>Height:</source>
<translation>높이:</translation>
</message>
<message>
<source>Width:</source>
<translation>너비:</translation>
</message>
<message>
<source>&amp;Options</source>
<translation>설정(&amp;O)</translation>
</message>
<message>
<source>Source Image:</source>
<translation>소스 이미지:</translation>
</message>
<message>
<source>There are no options for this type of frame</source>
<translation>프레임 형식을 위한 설정이 없습니다.</translation>
</message>
<message>
<source>Columns:</source>
<translation>열:</translation>
</message>
<message>
<source>Gap:</source>
<translation>단 간격:</translation>
</message>
<message>
<source>Link Created Frames</source>
<translation>생성된 프레임 링크</translation>
</message>
<message>
<source>Source Document:</source>
<translation>소스 문서:</translation>
</message>
<message>
<source>Range of Pages</source>
<translation>페이지 범위</translation>
</message>
<message>
<source>Custom Position</source>
<translation>사용자 위치</translation>
</message>
<message>
<source>Custom Size</source>
<translation>사용자 크기</translation>
</message>
<message>
<source>Link to Existing Frame</source>
<translation>기존 프레임 링크</translation>
</message>
</context>
<context>
<name>InsertAFrameBase</name>
<message>
<source>&amp;Text Frame</source>
<translation>텍스트 프레임(&amp;T)</translation>
</message>
<message>
<source>Alt+T</source>
<translation>Alt+T</translation>
</message>
<message>
<source>&amp;Image Frame</source>
<translation>이미지 프레임(&amp;I)</translation>
</message>
<message>
<source>Alt+I</source>
<translation>Alt+I</translation>
</message>
<message>
<source>T&amp;able</source>
<translation>표(&amp;A)</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<source>Polygon</source>
<translation>다각형</translation>
</message>
<message>
<source>X:</source>
<translation>X:</translation>
</message>
<message>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<source>&amp;Size</source>
<translation>크기(&amp;S)</translation>
</message>
<message>
<source>Height:</source>
<translation>높이:</translation>
</message>
<message>
<source>Width:</source>
<translation>너비:</translation>
</message>
<message>
<source>&amp;Options</source>
<translation>설정(&amp;O)</translation>
</message>
<message>
<source>Source Image:</source>
<translation>소스 이미지:</translation>
</message>
<message>
<source>&amp;Select File...</source>
<translation>파일 선택(&amp;S)...</translation>
</message>
<message>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<source>Columns:</source>
<translation>행:</translation>
</message>
<message>
<source>Gap:</source>
<translation>간격:</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>확인(&amp;O)</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
<message>
<source>All Pages</source>
<translation>전체 페이지</translation>
</message>
<message>
<source>...</source>
<translation>...</translation>
</message>
</context>
<context>
<name>InsertTable</name>
<message>
<source>Insert Table</source>
<translation>표 삽입</translation>
</message>
<message>
<source>Number of rows:</source>
<translation>삽입 행 수:</translation>
</message>
<message>
<source>Number of columns:</source>
<translation>삽입 열 수:</translation>
</message>
</context>
<context>
<name>JavaDocs</name>
<message>
<source>Edit JavaScripts</source>
<translation>자바스크립 편집</translation>
</message>
<message>
<source>&amp;Edit...</source>
<translation>편집(&amp;E)...</translation>
</message>
<message>
<source>&amp;Add...</source>
<translation>더하기(&amp;A)...</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<source>&amp;Close</source>
<translation>닫기(&amp;C)</translation>
</message>
<message>
<source>Adds a new Script, predefines a function with the same name. If you want to use this script as an &quot;Open Action&quot; script be sure not to change the name of the function.</source>
<translation>같은 이름을 가진 새로운 스크립트, 이미 정의된 함수를 더합니다. 스크립트를 &quot;Open Action&quot; 스크립트로 사용하려면 함수 이름을 변경하지 않도록 하여야 합니다.</translation>
</message>
<message>
<source>&amp;New Script:</source>
<translation>새 스크립트(&amp;N):</translation>
</message>
<message>
<source>New Script</source>
<translation>새 스크립트</translation>
</message>
<message>
<source>Do you really want to delete this script?</source>
<translation>이 스크립트를 정말로 삭제하시겠습니까?</translation>
</message>
</context>
<context>
<name>KeyManager</name>
<message>
<source>Action</source>
<translation>실행</translation>
</message>
<message>
<source>Current Key</source>
<translation>현재 키</translation>
</message>
<message>
<source>Select a Key for this Action</source>
<translation>실행 위해 키 선택</translation>
</message>
<message>
<source>&amp;No Key</source>
<translation>키 없음(&amp;N)</translation>
</message>
<message>
<source>&amp;User Defined Key</source>
<translation>사용자 정의 키(&amp;U)</translation>
</message>
<message>
<source>ALT+SHIFT+T</source>
<translation>ALT+SHIFT+T</translation>
</message>
<message>
<source>Set &amp;Key</source>
<translation>키 설정(&amp;K)</translation>
</message>
<message>
<source>Loadable Shortcut Sets</source>
<translation>읽을 수 있는 단축키 설정</translation>
</message>
<message>
<source>&amp;Load</source>
<translation>읽어오기(&amp;L)</translation>
</message>
<message>
<source>&amp;Import...</source>
<translation>들여오기(&amp;I)...</translation>
</message>
<message>
<source>&amp;Export...</source>
<translation>내보내기(&amp;E)...</translation>
</message>
<message>
<source>&amp;Reset</source>
<translation>초기화(&amp;R)</translation>
</message>
<message>
<source>Keyboard shortcut sets available to load</source>
<translation>읽어오기 가능한 키보드 단축키 설정</translation>
</message>
<message>
<source>Load the selected shortcut set</source>
<translation>선택한 단축키 설정 읽어오기</translation>
</message>
<message>
<source>Import a shortcut set into the current configuration</source>
<translation>단축키 설정을 현재 설정으로 들여오기</translation>
</message>
<message>
<source>Export the current shortcuts into an importable file</source>
<translation>현재 단축키를 파일로 내보내기</translation>
</message>
<message>
<source>Reload the default Scribus shortcuts</source>
<translation>기본 Scribus 단축키 다시 읽어오기</translation>
</message>
<message>
<source>Alt</source>
<translation>Alt</translation>
</message>
<message>
<source>Ctrl</source>
<translation>Ctrl</translation>
</message>
<message>
<source>Shift</source>
<translation>Shift</translation>
</message>
<message>
<source>Shift+</source>
<translation>Shift+</translation>
</message>
<message>
<source>Alt+</source>
<translation>Alt+</translation>
</message>
<message>
<source>Ctrl+</source>
<translation>Ctrl+</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>This Key Sequence is already in use</source>
<translation>이 키는 벌써 이용 중입니다</translation>
</message>
<message>
<source>Key Set XML Files (*.ksxml)</source>
<translation>키 모음 XML 파일 (*.ksxml)</translation>
</message>
<message>
<source>This key sequence is already in use</source>
<translation>이 키가 벌써 이용 중입니다</translation>
</message>
<message>
<source>Meta</source>
<translation>메타</translation>
</message>
<message>
<source>Meta+</source>
<translation>메타+</translation>
</message>
</context>
<context>
<name>LatexEditor</name>
<message>
<source>Enter Code:</source>
<translation>코드 입력:</translation>
</message>
<message>
<source>Update</source>
<translation>업데이트</translation>
</message>
<message>
<source>Revert</source>
<translation>거꾸로</translation>
</message>
<message>
<source>Program Messages:</source>
<translation>프로그램 메세지:</translation>
</message>
<message>
<source>Status: Unknown</source>
<translation>상태: 미정</translation>
</message>
<message>
<source>Kill Program</source>
<translation>프로그램을 삭제</translation>
</message>
<message>
<source>Options</source>
<translation>설정</translation>
</message>
<message>
<source>Resolution:</source>
<translation>해상도:</translation>
</message>
<message>
<source>Automatic</source>
<translation>자동</translation>
</message>
<message>
<source> DPI</source>
<translation> DPI</translation>
</message>
<message>
<source>Program:</source>
<translation>프로그램: </translation>
</message>
<message>
<source>Use Preamble</source>
<translation>머리말 사용</translation>
</message>
<message>
<source>Editor</source>
<translation>편집기</translation>
</message>
</context>
<context>
<name>LayerPalette</name>
<message>
<source>Delete Layer</source>
<translation>레이어 삭제</translation>
</message>
<message>
<source>Do you want to delete all objects on this layer too?</source>
<translation>이 레이어에서 전체 객체를 지우겠습니까?</translation>
</message>
<message>
<source>Layers</source>
<translation>레이어</translation>
</message>
<message>
<source>Name</source>
<translation>이름</translation>
</message>
<message>
<source>Add a new layer</source>
<translation>새 레이어 더하기</translation>
</message>
<message>
<source>Delete layer</source>
<translation>레이어 삭제</translation>
</message>
<message>
<source>Raise layer</source>
<translation>레이어 위로</translation>
</message>
<message>
<source>Lower layer</source>
<translation>레이어 아래로</translation>
</message>
<message>
<source>Opacity:</source>
<translation>불투명도:</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>Blend Mode:</source>
<translation>혼합 모드:</translation>
</message>
<message>
<source>Normal</source>
<translation>보통</translation>
</message>
<message>
<source>Darken</source>
<translation>어둡게</translation>
</message>
<message>
<source>Lighten</source>
<translation>밝게</translation>
</message>
<message>
<source>Multiply</source>
<translation>곱하기</translation>
</message>
<message>
<source>Screen</source>
<translation>화면</translation>
</message>
<message>
<source>Overlay</source>
<translation>중첩</translation>
</message>
<message>
<source>Hard Light</source>
<translation>아주 밝게</translation>
</message>
<message>
<source>Soft Light</source>
<translation>중간 밝게</translation>
</message>
<message>
<source>Difference</source>
<translation>차이</translation>
</message>
<message>
<source>Color Dodge</source>
<translation>피하기</translation>
</message>
<message>
<source>Color Burn</source>
<translation>태우기</translation>
</message>
<message>
<source>Exclusion</source>
<translation>제외</translation>
</message>
<message>
<source>Hue</source>
<translation>색조</translation>
</message>
<message>
<source>Saturation</source>
<translation>채도</translation>
</message>
<message>
<source>Color</source>
<translation>색상</translation>
</message>
<message>
<source>Luminosity</source>
<translation>광도</translation>
</message>
<message>
<source>Duplicates the current layer</source>
<translation>현재 레이어 복제</translation>
</message>
<message>
<source>Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. </source>
<translation>레이어 지시계의 색상 - 레이어 지시자가 캔버스상에 나타낼 수 있는 색상을 가지고 있습니다. 색상을 편집하기 위하여 더블 클릭을 하십시오.</translation>
</message>
<message>
<source>Make Layer Visible - Uncheck to hide the layer from the display </source>
<translation>레이어를 볼 수 있도록 합니다. - 화면에서 레이어를 숨기기 위하여 체크하지 않습니다.</translation>
</message>
<message>
<source>Print Layer - Uncheck to disable printing. </source>
<translation>인쇄 레이어 - 인쇄하지 않을 경우 체크하지 않습니다.</translation>
</message>
<message>
<source>Lock or Unlock Layer - Unchecked is unlocked </source>
<translation>레이어 잠금 또는 해제 - 체크되지 않으면 잠금해제 상태임</translation>
</message>
<message>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation>아래 레이어에서 객체 주변의 텍스트 흐름 - 비록 레이어들 아래에서 조차 이것은 텍스트 프레임이 다른 객체 주변에 흐름을 만들 수 있습니다.</translation>
</message>
<message>
<source>Outline Mode - Toggles the 'wireframe' display of objects to speed the display of very complex objects.</source>
<translation>윤곽선 모드 - 아주 복잡한 객체를 빨리 보기 위하여 객체의 줄 프레임 보기를 토글시킵니다.</translation>
</message>
<message>
<source>Name of the Layer - Double clicking on the name of a layer enabled editing</source>
<translation>레이어 이름 - 편집 가능한 레어어의 이름을 더블 클릭합니다.</translation>
</message>
</context>
<context>
<name>LegacyMode</name>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>All Supported Formats</source>
<translation>전체 지원 형식</translation>
</message>
</context>
<context>
<name>LensDialogBase</name>
<message>
<source>Optical Lens</source>
<translation>광학 렌즈</translation>
</message>
<message>
<source>Add Lens</source>
<translation>렌즈 더하기</translation>
</message>
<message>
<source>Remove Lens</source>
<translation>렌즈 삭제</translation>
</message>
<message>
<source>+</source>
<translation>+</translation>
</message>
<message>
<source>-</source>
<translation>-</translation>
</message>
<message>
<source>Lens Parameters</source>
<translation>렌즈 매개변수</translation>
</message>
<message>
<source>X Pos:</source>
<translation>X위치:</translation>
</message>
<message>
<source>Y Pos:</source>
<translation>Y위치:</translation>
</message>
<message>
<source>Radius:</source>
<translation>반경:</translation>
</message>
<message>
<source>Strength:</source>
<translation>힘:</translation>
</message>
<message>
<source>Magnification Lens</source>
<translation>확대 렌즈</translation>
</message>
<message>
<source>Fish Eye Lens</source>
<translation>어안 렌즈</translation>
</message>
</context>
<context>
<name>LensEffectsPlugin</name>
<message>
<source>Lens Effects...</source>
<translation>렌즈 효과...</translation>
</message>
<message>
<source>Path Tools</source>
<translation>경로 도구</translation>
</message>
<message>
<source>Lens Effects</source>
<translation>효과</translation>
</message>
<message>
<source>Apply fancy lens effects</source>
<translation>팬시 렌즈 효과 적용</translation>
</message>
</context>
<context>
<name>LensEffectsPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="66"/>
<source>Lens Effects...</source>
<translation>렌즈 효과...</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="70"/>
<source>Path Tools</source>
<translation>경로 도구</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="90"/>
<source>Lens Effects</source>
<translation>렌즈 효과</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="91"/>
<source>Apply fancy lens effects</source>
<translation>팬시 렌즈 효과 적용</translation>
</message>
</context>
<context>
<name>LineFormate</name>
<message>
<location filename="../lineformats.cpp" line="33"/>
<source>Edit Line Styles</source>
<translation>선 스타일 편집</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="49"/>
<source>&amp;Import</source>
<translation>들여오기</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="52"/>
<source>&amp;New</source>
<translation>새 파일(&amp;N)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="55"/>
<source>&amp;Edit</source>
<translation>편집(&amp;E)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="60"/>
<source>D&amp;uplicate</source>
<translation>복제(&amp;U)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="64"/>
<source>&amp;Delete</source>
<translation>삭제(&amp;D)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="68"/>
<source>&amp;Save</source>
<translation>저장(&amp;S)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="125"/>
<source>Copy of %1</source>
<translation>%1 복사</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="154"/>
<source>New Style</source>
<translation>새 스타일</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>Do you really want to delete this Style?</source>
<translation>이 스타일을 삭제하겠습니까?</translation>
</message>
<message>
<source>&amp;No</source>
<translation>아니오(&amp;N)</translation>
</message>
<message>
<source>&amp;Yes</source>
<translation>예(&amp;Y)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="216"/>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="216"/>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation>문서 (*.sla *.sla.gz *.scd *.scd.gz)전체 파일 (*)</translation>
</message>
<message>
<source>Documents (*.sla *.scd);;All Files (*)</source>
<translation>문서 (*.sla *.scd);;전체 파일 (*)</translation>
</message>
<message>
<location filename="../lineformats.cpp" line="194"/>
<source>Do you really want to delete this style?</source>
<translation>이 스타일을 삭제하겠습니까?</translation>
</message>
</context>
<context>
<name>LineStyleW</name>
<message>
<location filename="../smlinestylew.ui" line="184"/>
<source>%</source>
<translation>%</translation>
</message>
<message>
<location filename="../smlinestylew.ui" line="208"/>
<source>Line Width:</source>
<translation>선 너비:</translation>
</message>
</context>
<context>
<name>LineStyleWBase</name>
<message>
<source>%</source>
<translation>%</translation>
</message>
<message>
<source>Line Width:</source>
<translation>선 너비:</translation>
</message>
</context>
<context>
<name>LineStyleWidget</name>
<message>
<location filename="../smlinestyle.cpp" line="180"/>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="52"/>
<source>Flat Cap</source>
<translation>평면형</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="53"/>
<source>Square Cap</source>
<translation>사각형</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="54"/>
<source>Round Cap</source>
<translation>둥근형</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="56"/>
<source>Miter Join</source>
<translation>미터 결합</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="57"/>
<source>Bevel Join</source>
<translation>경사 결합</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="58"/>
<source>Round Join</source>
<translation>둥근 결합</translation>
</message>
<message>
<source>Solid Line</source>
<translation>실선</translation>
</message>
<message>
<source>Dashed Line</source>
<translation>대시선</translation>
</message>
<message>
<source>Dotted Line</source>
<translation>점선</translation>
</message>
<message>
<source>Dash Dot Line</source>
<translation>대시점선</translation>
</message>
<message>
<source>Dash Dot Dot Line</source>
<translation>대시점점선</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="70"/>
<source>Add a new line</source>
<translation>새 선 더하기</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="71"/>
<source>Remove a line</source>
<translation>선 제거</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="72"/>
<source>Line style</source>
<translation>선 스타일</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="73"/>
<source>Line width</source>
<translation>선 너비</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="74"/>
<source>End style</source>
<translation>끝 스타일</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="75"/>
<source>Join style</source>
<translation>결합 스타일</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="76"/>
<source>Line color</source>
<translation>선 색상</translation>
</message>
<message>
<location filename="../smlinestyle.cpp" line="77"/>
<source>Line shade</source>
<translation>선 음영</translation>
</message>
</context>
<context>
<name>LoadSavePlugin</name>
<message>
<source>All Files (*)</source>
<translation>전체 파일 (*)</translation>
</message>
<message>
<source>No File Loader Plugins Found</source>
<translation>파일 읽기 플러그인이 없음</translation>
</message>
</context>
<context>
<name>LoremManager</name>
<message>
<source>Select Lorem Ipsum</source>
<translation>Lorem Ipsum 선택</translation>
</message>
<message>
<source>Author:</source>
<translation>저작자:</translation>
</message>
<message>
<source>Get More:</source>
<translation>더 많이 얻기:</translation>
</message>
<message>
<source>XML File:</source>
<translation>XML 파일:</translation>
</message>
<message>
<source>Lorem Ipsum</source>
<translation>Lorem Ipsum</translation>
</message>
<message>
<source>Paragraphs:</source>
<translation>문단:</translation>
</message>
<message>
<source>Alt+O</source>
<translation>Alt+O</translation>
</message>
<message>
<source>Alt+C</source>
<translation>Alt+C</translation>
</message>
<message>
<source>Standard Lorem Ipsum</source>
<translation>표준 Lorem Ipsum</translation>
</message>
<message>
<source>Random Paragraphs</source>
<translation>무작위 문단</translation>
</message>
<message>
<source>Number of paragraphs of selected sample text to insert</source>
<translation>삽입될 선택 샘플 텍스트의 문단 갯수</translation>
</message>
<message>
<source>List of languages available to insert sample text in</source>
<translation>샘플 텍스트에 삽입 가능한 언어 목록</translation>
</message>
</context>
<context>
<name>MarginDialog</name>
<message>
<source>Manage Page Properties</source>
<translation>페이지 속성 관리</translation>
</message>
<message>
<source>Page Size</source>
<translation>페이지 크기</translation>
</message>
<message>
<source>&amp;Size:</source>
<translation>크기(&amp;S):</translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation>방향(&amp;N):</translation>
</message>
<message>
<source>Portrait</source>
<translation>세로 방향</translation>
</message>
<message>
<source>Landscape</source>
<translation>가로 방향</translation>
</message>
<message>
<source>&amp;Width:</source>
<translation>너비(&amp;W):</translation>
</message>
<message>
<source>&amp;Height:</source>
<translation>높이(&amp;H):</translation>
</message>
<message>
<source>Move Objects with their Page</source>
<translation>페이지와 함께 객체 이동</translation>
</message>
<message>
<source>Type:</source>
<translation>형태:</translation>
</message>
<message>
<source>Margin Guides</source>
<translation>여백 안내선</translation>
</message>
<message>
<source>Other Settings</source>
<translation>기타 설정</translation>
</message>
<message>
<source>Master Page:</source>
<translation>마스터 페이지:</translation>
</message>
<message>
<source>Size of the inserted pages, either a standard or custom size.</source>
<translation>삽입된 페이지 크기: 표준 또는 사용자 크기.</translation>
</message>
<message>
<source>Orientation of the page(s) to be inserted</source>
<translation>삽입 페이지 방향</translation>
</message>
<message>
<source>Width of the page(s) to be inserted</source>
<translation>삽입 페이지 너비</translation>
</message>
<message>
<source>Height of the page(s) to be inserted</source>
<translation>삽입 페이지 높이</translation>
</message>
<message>
<source>When inserting a new page between others, move objects with their current pages. This is the default action.</source>
<translation>다른 페이지 사이에 새로운 페이지 삽입시, 현재 페이지와 객체를 이동. 이것은 기본 작동입니다.</translation>
</message>
</context>
<context>
<name>MarginWidget</name>
<message>
<source>Preset Layouts:</source>
<translation>배치 사전 조정:</translation>
</message>
<message>
<source>&amp;Bottom:</source>
<translation>아래(&amp;B):</translation>
</message>
<message>
<source>&amp;Top:</source>
<translation>위(&amp;T):</translation>
</message>
<message>
<source>&amp;Right:</source>
<translation>오른쪽(&amp;R):</translation>
</message>
<message>
<source>&amp;Left:</source>
<translation>왼쪽(&amp;L):</translation>
</message>
<message>
<source>Apply the margin changes to all existing pages in the document</source>
<translation>문서의 전체 기존 마스터 페이지에 여백 변경을 적용</translation>
</message>
<message>
<source>Distance between the top margin guide and the edge of the page</source>
<translation>위 여백 안내선과 페이지 가장자리 사이의 거리</translation>
</message>
<message>
<source>Distance between the bottom margin guide and the edge of the page</source>
<translation>아래 여백 안내선과 페이지 가장자리 사이의 거리</translation>
</message>
<message>
<source>&amp;Inside:</source>
<translation>왼쪽(&amp;I):</translation>
</message>
<message>
<source>O&amp;utside:</source>
<translation>오른쪽(&amp;U):</translation>
</message>
<message>
<source>Printer Margins...</source>
<translation>프린터 여백...</translation>
</message>
<message>
<source>Import the margins for the selected page size from the available printers.</source>
<translation>이용가능한 프린터에서 선택된 페이지 크기에 맞는 여백 들여오기.</translation>
</message>
<message>
<source>Apply settings to:</source>
<translation>설정 적용:</translation>
</message>
<message>
<source>All Document Pages</source>
<translation>전체 문서 페이지</translation>
</message>
<message>
<source>All Master Pages</source>
<translation>전체 마스터 페이지</translation>
</message>
<message>
<source>Apply the margin changes to all existing master pages in the document</source>
<translation>문서에서 전체 기존 마스터 페이지에 여백 변경을 적용</translation>
</message>
<message>
<source>Margin Guides</source>
<translation>여백 안내선</translation>
</message>
<message>
<source>Top:</source>
<translation>위:</translation>
</message>
<message>
<source>Bottom:</source>
<translation>아래:</translation>
</message>
<message>
<source>Distance for bleed from the top of the physical page</source>
<translation>페이지 위부터 물림재단 거리</translation>
</message>
<message>
<source>Distance for bleed from the bottom of the physical page</source>
<translation>페이지 아래부터 물림재단 거리</translation>
</message>
<message>
<source>Distance for bleed from the left of the physical page</source>
<translation>페이지 왼쪽부터 물림재단 거리</translation>
</message>
<message>
<source>Distance for bleed from the right of the physical page</source>
<translation>페이지 오른쪽쪽부터 물림재단 거리</translation>
</message>
<message>
<source>Bleeds</source>
<translation>물림재단</translation>
</message>
<message>
<source>Inside:</source>
<translation>왼쪽:</translation>
</message>
<message>
<source>Outside:</source>
<translation>오른쪽:</translation>
</message>
<message>
<source>Left:</source>
<translation>왼쪽:</translation>
</message>
<message>
<source>Right:</source>
<translation>오른쪽:</translation>
</message>
<message>
<source>Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
<translation>왼쪽 여백 안내선과 페이지 모서리 사이의 거리. 두 쪽,세 쪽,네 쪽을 선택할 경우 이 여백 공간은 제본하기 위한 정확한 여백을 만들기 위하여 사용.</translation>
</message>
<message>
<source>Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
<translation>오른쪽 여백 안내선과 페이지 모서리 사이의 거리. 두 쪽,세 쪽,네 쪽을 선택할 경우 이 여백 공간은 제본하기 위한 정확한 여백을 만들기 위하여 사용.</translation>
</message>
</context>
<context>
<name>MasterPagesPalette</name>
<message>
<source>Edit Master Pages</source>
<translation>마스터 페이지 편집</translation>
</message>
<message>
<source>Duplicate the selected master page</source>
<translation>선택된 마스터 페이지 복제</translation>
</message>
<message>
<source>Delete the selected master page</source>
<translation>선택된 마스터 페이지 삭제</translation>
</message>
<message>
<source>Add a new master page</source>
<translation>새 마스터 페이지 더하기</translation>
</message>
<message>
<source>Import master pages from another document</source>
<translation>다른 문서에서 마스터 페이지 들여오기</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>Do you really want to delete this master page?</source>
<translation>이 마스터 페이지를 정말로 삭제하시겠습니까?</translation>
</message>
<message>
<source>&amp;No</source>
<translation>아니오(&amp;N)</translation>
</message>
<message>
<source>&amp;Yes</source>
<translation>예(&amp;Y)</translation>
</message>
<message>
<source>&amp;Name:</source>
<translation>이름(&amp;N):</translation>
</message>
<message>
<source>New Master Page</source>
<translation>새 마스터 페이지</translation>
</message>
<message>
<source>Name:</source>
<translation>이름:</translation>
</message>
<message>
<source>New MasterPage</source>
<translation>새 마스터 페이지</translation>
</message>
<message>
<source>Copy #%1 of </source>
<translation>#%1 복사</translation>
</message>
<message>
<source>Normal</source>
<translation>보통</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="79"/>
<source>Duplicate the selected master page</source>
<translation>선택된 마스터 페이지를 복제합니다</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="80"/>
<source>Delete the selected master page</source>
<translation>선택된 마스터 페이지를 삭제합니다</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="81"/>
<source>Add a new master page</source>
<translation>새 마스터 페이지를 더합니다.</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="82"/>
<source>Import master pages from another document</source>
<translation>다른 문서에서 마스터 페이지를 들여옵니다</translation>
</message>
<message>
<source>New Master Page %1</source>
<translation>새 마스터 페이지 %1</translation>
</message>
<message>
<source>Unable to Rename Master Page</source>
<translation>마스터 페이지의 이름을 변경할 수 없음</translation>
</message>
<message>
<source>The Normal page is not allowed to be renamed.</source>
<translation>보통 페이지 이름을 변경할 수 없습니다.</translation>
</message>
<message>
<source>Rename Master Page</source>
<translation>마스터 페이지 다른 이름으로</translation>
</message>
<message>
<source>New Name:</source>
<translation>새 이름:</translation>
</message>
<message>
<source>Copy #%1 of %2</source>
<translation>#% 1을 %2에 복사</translation>
</message>
</context>
<context>
<name>Mdup</name>
<message>
<location filename="../mdup.cpp" line="29"/>
<source>Multiple Duplicate</source>
<translation>다수 복제</translation>
</message>
<message>
<location filename="../mdup.cpp" line="48"/>
<source>&amp;Number of Copies:</source>
<translation>복사 갯수(&amp;N):</translation>
</message>
<message>
<location filename="../mdup.cpp" line="50"/>
<source>&amp;Horizontal Shift:</source>
<translation>수평 이동(&amp;H):</translation>
</message>
<message>
<location filename="../mdup.cpp" line="52"/>
<source>&amp;Vertical Shift:</source>
<translation>수직 이동(&amp;V):</translation>
</message>
</context>
<context>
<name>Measurements</name>
<message>
<source>Distances</source>
<translation>거리</translation>
</message>
<message>
<location filename="../measurements.cpp" line="49"/>
<source>pt</source>
<translation>포인트</translation>
</message>
<message>
<source>X1:</source>
<translation>X1:</translation>
</message>
<message>
<source>Y1:</source>
<translation>Y1:</translation>
</message>
<message>
<source>X2:</source>
<translation>X2:</translation>
</message>
<message>
<source>Y2:</source>
<translation>Y2:</translation>
</message>
<message>
<source>DX:</source>
<translation>거리X:</translation>
</message>
<message>
<source>DY:</source>
<translation>거리Y:</translation>
</message>
<message>
<source>Angle:</source>
<translation>각도:</translation>
</message>
<message>
<source>Length:</source>
<translation>길이:</translation>
</message>
<message>
<source> °</source>
<translation> 도</translation>
</message>
</context>
<context>
<name>MergeDoc</name>
<message>
<source>Import Master Page</source>
<translation>마스터 페이지 들여오기</translation>
</message>
<message>
<source>Import Page(s)</source>
<translation>페이지 들여오기</translation>
</message>
<message>
<source>&amp;From Document:</source>
<translation>문서(&amp;F):</translation>
</message>
<message>
<source>Chan&amp;ge...</source>
<translation>바꾸기(&amp;G)...</translation>
</message>
<message>
<source>&amp;Import Page(s):</source>
<translation>페이지 들여오기(&amp;I):</translation>
</message>
<message>
<source>&amp;Import Master Page</source>
<translation>마스터 페이지 들여오기(&amp;I)</translation>
</message>
<message>
<source>Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number.</source>
<translation>전체 페이지는 *, 페이지의 일정 범위로 표시할 때는 1-5, 또는 단일 페이지 번호 1 로 표시하기 위하여 분리된 콤마를 삽입합니다.</translation>
</message>
<message>
<source> from 0</source>
<translation>0 부터</translation>
</message>
<message>
<source>Create Page(s)</source>
<translation>페이지 생성</translation>
</message>
<message>
<source>Before Page</source>
<translation>페이지 전</translation>
</message>
<message>
<source>After Page</source>
<translation>페이지 후</translation>
</message>
<message>
<source>At End</source>
<translation>끝에</translation>
</message>
<message>
<source>&amp;Import</source>
<translation>들여오기(&amp;I)</translation>
</message>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
<translation>문서 (*.sla *.sla.gz *.scd *.scd.gz)전체 파일 (*)</translation>
</message>
<message>
<source> from %1</source>
<translation>%1 부터</translation>
</message>
</context>
<context>
<name>MeshDistortionDialog</name>
<message>
<source>Dialog</source>
<translation>대화창</translation>
</message>
<message>
<source>+</source>
<translation>+</translation>
</message>
<message>
<source>-</source>
<translation>-</translation>
</message>
</context>
<context>
<name>MeshDistortionPlugin</name>
<message>
<source>Mesh Distortion...</source>
<translation>망사 왜곡...</translation>
</message>
<message>
<source>Path Tools</source>
<translation>경로 도구</translation>
</message>
<message>
<source>Mesh Distortion of Polygons</source>
<translation>다각형의 망사 왜곡</translation>
</message>
</context>
<context>
<name>MissingFont</name>
<message>
<source>Missing Font</source>
<translation>없는 글꼴</translation>
</message>
<message>
<source>The Font %1 is not installed.</source>
<translation>글꼴 %1 이 설치되지 않았습니다.</translation>
</message>
<message>
<source>Use</source>
<translation>사용</translation>
</message>
<message>
<source>instead</source>
<translation>대체</translation>
</message>
</context>
<context>
<name>ModeToolBar</name>
<message>
<source>Tools</source>
<translation>도구</translation>
</message>
<message>
<source>Properties...</source>
<translation>속성 지정...</translation>
</message>
</context>
<context>
<name>MovePages</name>
<message>
<source>Move Pages</source>
<translation>페이지 이동</translation>
</message>
<message>
<source>Copy Page</source>
<translation>페이지 복사</translation>
</message>
<message>
<source>Move Page(s)</source>
<translation>페이지 이동</translation>
</message>
<message>
<source>To:</source>
<translation>To:</translation>
</message>
<message>
<source>Number of copies:</source>
<translation>복사 갯수:</translation>
</message>
<message>
<source>Before Page</source>
<translation>페이지 전</translation>
</message>
<message>
<source>After Page</source>
<translation>페이지 후</translation>
</message>
<message>
<source>At End</source>
<translation>끝에</translation>
</message>
<message>
<source>Move Page(s):</source>
<translation>페이지 이동:</translation>
</message>
</context>
<context>
<name>MultiLine</name>
<message>
<location filename="../multiline.cpp" line="32"/>
<source>Edit Style</source>
<translation>스타일 편집</translation>
</message>
<message>
<location filename="../multiline.cpp" line="86"/>
<source>Flat Cap</source>
<translation>평면형</translation>
</message>
<message>
<location filename="../multiline.cpp" line="87"/>
<source>Square Cap</source>
<translation>사각형</translation>
</message>
<message>
<location filename="../multiline.cpp" line="88"/>
<source>Round Cap</source>
<translation>둥근형</translation>
</message>
<message>
<location filename="../multiline.cpp" line="92"/>
<source>Miter Join</source>
<translation>미터 결합</translation>
</message>
<message>
<location filename="../multiline.cpp" line="93"/>
<source>Bevel Join</source>
<translation>경사 결합</translation>
</message>
<message>
<location filename="../multiline.cpp" line="94"/>
<source>Round Join</source>
<translation>둥근 결합</translation>
</message>
<message>
<location filename="../multiline.cpp" line="100"/>
<source>Line Width:</source>
<translation>선 너비:</translation>
</message>
<message>
<location filename="../multiline.cpp" line="105"/>
<source> pt</source>
<translation> 포인트</translation>
</message>
<message>
<location filename="../multiline.cpp" line="118"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source> pt </source>
<translation> 포이트 </translation>
</message>
<message>
<source>Solid Line</source>
<translation>실선</translation>
</message>
<message>
<source>Dashed Line</source>
<translation>대시선</translation>
</message>
<message>
<source>Dotted Line</source>
<translation>점선</translation>
</message>
<message>
<source>Dash Dot Line</source>
<translation>대시점선</translation>
</message>
<message>
<source>Dash Dot Dot Line</source>
<translation>대시점점선</translation>
</message>
<message>
<source>Warning</source>
<translation>경고</translation>
</message>
<message>
<source>Name &quot;%1&quot; isn&apos;t unique.
Please choose another.</source>
<translation>이름 &quot;%1&quot; 이 이미 있습니다.
다른 이름을 선택하세요.</translation>
</message>
<message>
<location filename="../multiline.cpp" line="284"/>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<location filename="../multiline.cpp" line="284"/>
<source>Name &quot;%1&quot; isn&apos;t unique.&lt;br/&gt;Please choose another.</source>
<translation>이름 &quot;%1&quot; 이 이미 있습니다.
&lt;br/&gt;다른 이름을 선택하세요.</translation>
</message>
<message>
<location filename="../multiline.cpp" line="270"/>
<source>pt</source>
<translation>포인트</translation>
</message>
</context>
 
<context>
<name>MultiProgressDialog</name>
<message>
<source>Progress</source>
<translation>진행</translation>
</message>
<message>
<source>Overall Progress:</source>
<translation>전체 진행:</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
</context>
<context>
<name>MultipleDuplicate</name>
<message>
<source>&amp;Horizontal Shift:</source>
<translation>수평 이동(&amp;H):</translation>
</message>
<message>
<source>&amp;Vertical Shift:</source>
<translation>수직 이동(&amp;V):</translation>
</message>
<message>
<location filename="../../scribus/multipleduplicate.cpp" line="69"/>
<source>&amp;Horizontal Gap:</source>
<translation>수평 간격(&amp;H):</translation>
</message>
<message>
<location filename="../../scribus/multipleduplicate.cpp" line="70"/>
<source>&amp;Vertical Gap:</source>
<translation>수직 간격(&amp;V):</translation>
</message>
<message>
<source>Multiple Duplicate</source>
<translation>다수 복제 방법</translation>
</message>
<message>
<source>&amp;By Number of Copies</source>
<translation>복사 갯수(&amp;B)</translation>
</message>
<message>
<source>&amp;Number of Copies:</source>
<translation>복사할 갯수(&amp;N):</translation>
</message>
<message>
<source>&amp;Shift Created Items By</source>
<translation>생성 객체 이동(&amp;S)</translation>
</message>
<message>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<source>Create &amp;Gap Between Items Of</source>
<translation>객체 사이 간격 생성(&amp;G)</translation>
</message>
<message>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<source>Rotation:</source>
<translation>회전:</translation>
</message>
<message>
<source>By &amp;Rows &amp;&amp; Columns</source>
<translation>행/열(&amp;R)</translation>
</message>
<message>
<source>&amp;Vertical Gap:</source>
<translation>수직 간격(&amp;V):</translation>
</message>
<message>
<source>&amp;Horizontal Gap:</source>
<translation>수평 간격(&amp;H):</translation>
</message>
<message>
<source>Number of Rows:</source>
<translation>삽입 행:</translation>
</message>
<message>
<source>Number of Columns:</source>
<translation>삽입 열:</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>확인(&amp;O)</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>취소(&amp;C)</translation>
</message>
</context>
<context>
<name>MyPlugin</name>
<message>
<source>My &amp;Plugin</source>
<translation>자작 플러그인(&amp;P)</translation>
</message>
</context>
<context>
<name>MyPluginImpl</name>
<message>
<source>Scribus - My Plugin</source>
<translation>Scribus - 자작 플러그인</translation>
</message>
<message>
<source>The plugin worked!</source>
<translation>플러그인 작업 완료!</translation>
</message>
</context>
<context>
<name>NewDoc</name>
<message>
<source>New Document</source>
<translation>새 문서</translation>
</message>
<message>
<source>&amp;New Document</source>
<translation>새 문서(&amp;N)</translation>
</message>
<message>
<source>Open &amp;Existing Document</source>
<translation>기존 문서 열기(&amp;E)</translation>
</message>
<message>
<source>Open Recent &amp;Document</source>
<translation>최근 문서 열기(&amp;D)</translation>
</message>
<message>
<source>Do not show this dialog again</source>
<translation>현재 창을 숨기기</translation>
</message>
<message>
<source>Document page size, either a standard size or a custom size</source>
<translation>문서 페이지 크기 또는 사용자 크기</translation>
</message>
<message>
<source>Orientation of the document's pages</source>
<translation>문서 페이지 방향</translation>
</message>
<message>
<source>Width of the document's pages, editable if you have chosen a custom page size</source>
<translation>문서 페이지 너비. 사용자 페이지 크기를 선택하면 편집이 가능</translation>
</message>
<message>
<source>Height of the document's pages, editable if you have chosen a custom page size</source>
<translation>문서 페이지 높이. 사용자 페이지 크기를 선택하면 편집이 가능</translation>
</message>
<message>
<source>Initial number of pages of the document</source>
<translation>문서의 초기 페이지수</translation>
</message>
<message>
<source>Default unit of measurement for document editing</source>
<translation>문서를 편집할 때 기본 측정 단위</translation>
</message>
<message>
<source>Create text frames automatically when new pages are added</source>
<translation>새 페이지를 더할 때 자동 텍스트 프레임 생성.</translation>
</message>
<message>
<source>Number of columns to create in automatically created text frames</source>
<translation>자동 생성된 텍스트 프레임에서 생성될 열 수</translation>
</message>
<message>
<source>Distance between automatically created columns</source>
<translation>자동 생성된 열 사이 공백</translation>
</message>
<message>
<source>&amp;Size:</source>
<translation>크기(&amp;S):</translation>
</message>
<message>
<source>Orie&amp;ntation:</source>
<translation>방향(&amp;N):</translation>
</message>
<message>
<source>Portrait</source>
<translation>세로 방향</translation>
</message>
<message>
<source>Landscape</source>
<translation>가로 방향</translation>
</message>
<message>
<source>&amp;Width:</source>
<translation>너비(&amp;W):</translation>
</message>
<message>
<source>&amp;Height:</source>
<translation>높이(&amp;H):</translation>
</message>
<message>
<source>Margin Guides</source>
<translation>여백 안내선</translation>
</message>
<message>
<source>Options</source>
<translation>설정</translation>
</message>
<message>
<source>N&amp;umber of Pages:</source>
<translation>페이지 수(&amp;U):</translation>
</message>
<message>
<source>&amp;Default Unit:</source>
<translation>기본 단위(&amp;D):</translation>
</message>
<message>
<source>&amp;Automatic Text Frames</source>
<translation>자동 텍스트 프레임(&amp;A)</translation>
</message>
<message>
<source>&amp;Gap:</source>
<translation>간격(&amp;G):</translation>
</message>
<message>
<source>Colu&amp;mns:</source>
<translation>열(&amp;M):</translation>
</message>
<message>
<source>Open</source>
<translation>열기</translation>
</message>
<message>
<source>First Page is:</source>
<translation>처음 페이지 위치:</translation>
</message>
<message>
<source>Show Document Settings After Creation</source>
<translation>생성 후 문서 설정 보이기</translation>
</message>
<message>
<source>Document Layout</source>
<translation>제책</translation>
</message>
</context>
<context>
<name>NewFromTemplatePlugin</name>
<message>
<source>New &amp;from Template...</source>
<translation>서식에서 새 파일(&amp;F)...</translation>
</message>
<message>
<source>Load documents with predefined layout</source>
<translation>사전 정의된 배열로 문서 불러오기</translation>
</message>
<message>
<source>Start a document from a template made by other users or yourself (f.e. for documents you have a constant style).</source>
<translation>사용자에 의해 만들어진 서식으로 부터 문서를 시작합니다.</translation>
</message>
</context>
<context>
<name>NodePalette</name>
<message>
<source>Nodes</source>
<translation>조절점</translation>
</message>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>&amp;Absolute Coordinates</source>
<translation>절대 좌표(&amp;A)</translation>
</message>
<message>
<source>&amp;X-Pos:</source>
<translation>X 위치(&amp;X):</translation>
</message>
<message>
<source>&amp;Y-Pos:</source>
<translation>Y 위치(&amp;Y):</translation>
</message>
<message>
<source>Edit &amp;Contour Line</source>
<translation>기본 윤곽선 편집(&amp;C)</translation>
</message>
<message>
<source>&amp;Reset Contour Line</source>
<translation>기본 윤곽선 초기화(&amp;R)</translation>
</message>
<message>
<source>&amp;End Editing</source>
<translation>편집 종료(&amp;E)</translation>
</message>
<message>
<source>Move Nodes</source>
<translation>조절점 이동</translation>
</message>
<message>
<source>Move Control Points</source>
<translation>제어점 이동</translation>
</message>
<message>
<source>Add Nodes</source>
<translation>조절점 더하기</translation>
</message>
<message>
<source>Delete Nodes</source>
<translation>조절점 삭제</translation>
</message>
<message>
<source>Move Control Points Independently</source>
<translation>제어점을 독립적으로 이동</translation>
</message>
<message>
<source>Move Control Points Symmetrical</source>
<translation>제어점을 대칭적으로 이동</translation>
</message>
<message>
<source>Reset Control Points</source>
<translation>제어점 초기화</translation>
</message>
<message>
<source>Reset this Control Point</source>
<translation>이 제어점 초기화</translation>
</message>
<message>
<source>Open a Polygon or Cuts a Bezier Curve</source>
<translation>다각형을 열거나 베지어곡선을 잘라내기</translation>
</message>
<message>
<source>Close this Bezier Curve</source>
<translation>이 베지어 곡선 닫기</translation>
</message>
<message>
<source>Mirror the Path Horizontally</source>
<translation>조절점 경로 수평으로 대칭이동</translation>
</message>
<message>
<source>Mirror the Path Vertically</source>
<translation>조절점 경로 수직으로 대칭이동</translation>
</message>
<message>
<source>Shear the Path Horizontally to the Right</source>
<translation>조절점 경로를 오른쪽 수평으로 기울이기</translation>
</message>
<message>
<source>Shear the Path Horizontally to the Left</source>
<translation>조절점 경로를 왼쪽 수평으로 기울이기</translation>
</message>
<message>
<source>Shear the Path Vertically Up</source>
<translation>조절점 경로를 위쪽 수직으로 기울이기</translation>
</message>
<message>
<source>Shear the Path Vertically Down</source>
<translation>조절점 경로를 아래쪽 수직으로 기울이기</translation>
</message>
<message>
<source>Rotate the Path Counter-Clockwise</source>
<translation>조절점 경로 반시계방향 회전</translation>
</message>
<message>
<source>Rotate the Path Clockwise</source>
<translation>조절점 경로 시계방향 회전</translation>
</message>
<message>
<source>Enlarge the Size of the Path by shown %</source>
<translation>% 로 조절점 경로 크기 늘임</translation>
</message>
<message>
<source>Angle of Rotation</source>
<translation>회전 각도</translation>
</message>
<message>
<source>Activate Contour Line Editing Mode</source>
<translation>기본 윤곽선 편집 모드 활성화</translation>
</message>
<message>
<source>Reset the Contour Line to the Original Shape of the Frame</source>
<translation>기본 윤곽선을 프레임 초기 상태로 되돌림</translation>
</message>
<message>
<source>When checked use coordinates relative to the page, otherwise coordinates are relative to the Object.</source>
<translation>체크되면 페이지와 연관된 좌표를 사용. 그렇지 않으면 좌표는 객체와 연관이 있음.</translation>
</message>
<message>
<source>Shrink the Size of the Path by shown %</source>
<translation>% 에 의해 나타나는 경로 크기 줄임</translation>
</message>
<message>
<source>Reduce the Size of the Path by the shown value</source>
<translation>제시된 값으로 조절점 경로 크기 줄임</translation>
</message>
<message>
<source>Enlarge the Size of the Path by the shown value</source>
<translation>보여지는 값으로 경로 크기를 크게</translation>
</message>
<message>
<source>% to Enlarge or Shrink By</source>
<translation>확대/축소 %단위</translation>
</message>
<message>
<source>Value to Enlarge or Shrink By</source>
<translation>확대/축소 수치 </translation>
</message>
<message>
<source>Set Contour to Image Clip</source>
<translation>이미지 클립으로 외곽선 설정</translation>
</message>
<message>
<source>Reset the Contour Line to the Clipping Path of the Image</source>
<translation>이미지 클립 경로의 외곽선을 초기화</translation>
</message>
<message>
<source>to Canvas</source>
<translation>캔버스로</translation>
</message>
<message>
<source>to Page</source>
<translation>페이지로</translation>
</message>
</context>
<context>
<name>OODPlug</name>
<message>
<source>This document does not seem to be an OpenOffice Draw file.</source>
<translation>이 문서는 OpenOffice Draw 파일은 아닌 것 같습니다.</translation>
</message>
<message>
<source>Group%1</source>
<translation>그룹 %1</translation>
</message>
</context>
<context>
<name>OODrawImportPlugin</name>
<message>
<source>Import &amp;OpenOffice.org Draw...</source>
<translation>OpenOffice.org Draw 들여오기(&amp;O)...</translation>
</message>
<message>
<source>Imports OpenOffice.org Draw Files</source>
<translation>OpenOffice.org Draw 파일 들여오기</translation>
</message>
<message>
<source>Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects.</source>
<translation>OpenOffice.org Draw 파일을 현재 문서로 읽어오고, 벡터 자료를 Scribus 객체로 변환시킵니다.</translation>
</message>
<message>
<source>OpenDocument 1.0 Draw</source>
<comment>Import/export format name</comment>
<translation>OpenDocument 1.0 Draw 들여오기</translation>
</message>
<message>
<source>OpenOffice.org 1.x Draw</source>
<comment>Import/export format name</comment>
<translation>OpenOffice.org 1.x Draw 들여오기</translation>
</message>
<message>
<source>This file contains some unsupported features</source>
<translation>이 파일은 지원하지 않은 특성을 포함하고 있습니다</translation>
</message>
<message>
<source>The file could not be imported</source>
<translation>파일을 들여올 수 없습니다</translation>
</message>
</context>
<context>
<name>OdtDialog</name>
<message>
<source>OpenDocument Importer Options</source>
<translation>OpenDocument 들여오기 설정</translation>
</message>
<message>
<source>Overwrite Paragraph Styles</source>
<translation>문단 스타일 겹쳐쓰기</translation>
</message>
<message>
<source>Enabling this will overwrite existing styles in the current Scribus document</source>
<translation>현재 Scribus문서에서 기존 스타일을 겹쳐쓰는 것이 가능합니다.</translation>
</message>
<message>
<source>Merge Paragraph Styles</source>
<translation>문단 스타일 병합</translation>
</message>
<message>
<source>Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document's styles are named differently.</source>
<translation>속성에 의하여 문단 스타일을 합칩니다. 원래 문서 스타일이 다르게 명명되었더라도 이것은 약간 문단 스타일에 영향을 미치고 스타일 속성이 유지됩니다.</translation>
</message>
<message>
<source>Use document name as a prefix for paragraph styles</source>
<translation>문단 스타일에 접두어로 문서이름을 사용합니다.</translation>
</message>
<message>
<source>Prepend the document name to the paragraph style name in Scribus.</source>
<translation>Scribus에서 문서 이름을 문단 스타일 이름으로 추가합니다.</translation>
</message>
<message>
<source>Do not ask again</source>
<translation>다시 묻지 않음</translation>
</message>
<message>
<source>Make these settings the default and do not prompt again when importing an OASIS OpenDocument.</source>
<translation>이들 설정을 기본값으로 만들고, OASIS OpenDocument를 들여올 때 다시 묻지 않습니다.</translation>
</message>
<message>
<source>OK</source>
<translation>확인</translation>
</message>
<message>
<source>Cancel</source>
<translation>취소</translation>
</message>
</context>
<context>
<name>OldScribusFormat</name>
<message>
<source>Scribus Document</source>
<translation>Scribus 문서</translation>
</message>
<message>
<source>Scribus 1.2.x Document</source>
<translation>Scribus 1.2.x 문서</translation>
</message>
</context>
<context>
<name>OneClick</name>
<message>
<source>Origin</source>
<translation>시점</translation>
</message>
<message>
<source>Size</source>
<translation>크기</translation>
</message>
<message>
<source>Width:</source>
<translation>너비:</translation>
</message>
<message>
<source>Length:</source>
<translation>길이:</translation>
</message>
<message>
<source>Height:</source>
<translation>높이:</translation>
</message>
<message>
<source>Angle:</source>
<translation>각도:</translation>
</message>
<message>
<source>Remember Values</source>
<translation>값 기억</translation>
</message>
</context>
<context>
<name>OutlinePalette</name>
<message>
<source>Element</source>
<translation>요소</translation>
</message>
<message>
<source>Name &quot;%1&quot; isn't unique.&lt;br/>Please choose another.</source>
<translation>이름 &quot;%1&quot; 이 이미 있습니다.&lt;br/>다른 이름을 선택하시오</translation>
</message>
<message>
<source>Group </source>
<translation>그룹 </translation>
</message>
<message>
<source>Page </source>
<translation>페이지 </translation>
</message>
<message>
<source>Free Objects</source>
<translation>자유 객체</translation>
</message>
<message>
<source>Outline</source>
<translation>문서 전체 윤곽</translation>
</message>
<message>
<source>Enter a keyword or regular expression to filter the outline.</source>
<translation>윤곽선을 필터하기 위한 키워드 또는 정규 표현식을 입력.</translation>
</message>
<message>
<source>Ctrl+f</source>
<comment>Filter the Outline using a keyword</comment>
<translation>Ctrl+f</translation>
</message>
<message>
<source>Filter:</source>
<translation>필터:</translation>
</message>
</context>
<context>
<name>OutlineValues</name>
<message>
<source> %</source>
<translation> %</translation>
</message>
<message>
<source>Linewidth</source>
<translation>선 너비</translation>
</message>
</context>
<context>
<name>PDFExportDialog</name>
<message>
<source>Save as PDF</source>
<translation>PDF 저장</translation>
</message>
<message>
<source>O&amp;utput to File:</source>
<translation>출력을 파일로(&amp;U):</translation>
</message>
<message>
<source>Cha&amp;nge...</source>
<translation>바꾸기(&amp;N)...</translation>
</message>
<message>
<source>Output one file for eac&amp;h page</source>
<translation>여러 페이지를 한 파일로 출력(&amp;H)</translation>
</message>
<message>
<source>&amp;Save</source>
<translation>저장(&amp;S)</translation>
</message>
<message>
<source>This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing.</source>
<translation>문서에서 각각 명명된 PDF파일을 개별적으로 내보낼 수 있습니다. 페이지번호를 자동으로 더합니다. 이것은 상업적 출판에서 PDF 생성에 가장 유용합니다.</translation>
</message>
<message>
<source>Save as</source>
<translation>다른 이름으로</translation>
</message>
<message>
<source>PDF Files (*.pdf);;All Files (*)</source>
<translation>PDF 파일 (*.pdf);;전체 파일 (*)</translation>
</message>
<message>
<source>The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab.</source>
<translation>PDF/X-3내보내기를 시도하거나 the PDF/X-3 탭에서 정보 문자가 빠졌을 경우에는 저장 버튼은 사용할 수 없습니다.</translation>
</message>
<message>
<source>%1 does not exists and will be created, continue?</source>
<translation>%1이 없지만 생성시킬 수 있습니다. 계속 하시겠습니까?</translation>
</message>
<message>
<source>Cannot create directory:
%1</source>
<translation>폴더를 생성할 수 없음:
%1</translation>
</message>
</context>
<context>
<name>PDFLibCore</name>
<message>
<source>Saving PDF</source>
<translation>PDF 저장 중</translation>
</message>
<message>
<source>Exporting Master Page:</source>
<translation>마스터 페이지 내보내기 중:</translation>
</message>
<message>
<source>Exporting Page:</source>
<translation>페이지 내보내기 중:</translation>
</message>
<message>
<source>Exporting Items on Current Page:</source>
<translation>현재 페이지 객체 내보내기 중:</translation>
</message>
<message>
<source>Page:</source>
<translation>페이지:</translation>
</message>
<message>
<source>Date:</source>
<translation>날짜:</translation>
</message>
<message>
<source>Failed to load an image : %1</source>
<translation>이미지 읽어오기 실패 : %1</translation>
</message>
<message>
<source>Failed to write an image : %1</source>
<translation>이미지 쓰기 실패 : %1</translation>
</message>
<message>
<source>Failed to load an image mask : %1</source>
<translation>이미지 마스크 읽어오기 실패 : %1</translation>
</message>
<message>
<source>Insufficient memory for processing an image</source>
<translation>이미지 처리를 위한 불충분한 메모리</translation>
</message>
<message>
<source>A write error occured, please check available disk space</source>
<translation>쓰기 오류 발생, 사용가능한 디스크 공간을 확인하시오</translation>
</message>
</context>
<context>
<name>PDFToolBar</name>
<message>
<source>PDF Tools</source>
<translation>PDF 도구</translation>
</message>
</context>
<context>
<name>PPreview</name>
<message>
<source>Print Preview</source>
<translation>인쇄 미리보기</translation>
</message>
<message>
<source>Display Trans&amp;parency</source>
<translation>투명도 보이기(&amp;P)</translation>
</message>
<message>
<source>&amp;Under Color Removal</source>
<translation>색상 제거 상태(&amp;U)</translation>
</message>
<message>
<source>&amp;Display CMYK</source>
<translation>CMYK 보이기(&amp;D)</translation>
</message>
<message>
<source>&amp;C</source>
<translation>&amp;C</translation>
</message>
<message>
<source>&amp;M</source>
<translation>&amp;M</translation>
</message>
<message>
<source>&amp;Y</source>
<translation>&amp;Y</translation>
</message>
<message>
<source>&amp;K</source>
<translation>&amp;K</translation>
</message>
<message>
<source>Separation Name</source>
<translation>분해 이름</translation>
</message>
<message>
<source>Cyan</source>
<translation>남색</translation>
</message>
<message>
<source>Magenta</source>
<translation>자홍색</translation>
</message>
<message>
<source>Yellow</source>
<translation>노란색</translation>
</message>
<message>
<source>Black</source>
<translation>검은색</translation>
</message>
<message>
<source>Scaling:</source>
<translation>비율:</translation>
</message>
<message>
<source>Close</source>
<translation>닫기</translation>
</message>
<message>
<source>Print...</source>
<translation>인쇄...</translation>
</message>
<message>
<source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later</source>
<translation>문서의 투명도와 투명 객체를 보입니다. 고스트 7.07버전이상을 요구합니다.</translation>
</message>
<message>
<source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
<translation>RGB색상 대신 CMYK의 가상실험을 이용하여 인쇄 미리보기를 합니다.</translation>
</message>
<message>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
<translation>검정, 청록, 노랑, 자홍으로 구성된 그레이 음영으로 바꾸는 방법. UCR은 회색에 가까운 중간 또는 어두운 색조의 이미지부분에 영향을 준다. 이것은 이미지출력과 실험방법 및 개별적으로 필요한 테스팅등을 향상시킨다. UCR은 CMY 잉크의 과도한 채색의 가능성을 감소시켜 줍니다</translation>
</message>
<message>
<source>Resize the scale of the page.</source>
<translation>페이지 비율 변경</translation>
</message>
<message>
<source>Enable/disable the C (Cyan) ink plate</source>
<translation>C(남색)잉크 팔레트 가능/불가</translation>
</message>
<message>
<source>Enable/disable the M (Magenta) ink plate</source>
<translation>M(자홍색)잉크 팔레트 가능/불가</translation>
</message>
<message>
<source>Enable/disable the Y (Yellow) ink plate</source>
<translation>Y(노란색)잉크 팔레트 가능/불가</translation>
</message>
<message>
<source>Enable/disable the K (Black) ink plate</source>
<translation>K(검은색)잉크 팔레트 가능/불가</translation>
</message>
<message>
<source>All</source>
<translation>전체</translation>
</message>
<message>
<source>File</source>
<translation>파일</translation>
</message>
<message>
<source>Enable &amp;Antialiasing</source>
<translation>부드러운 처리 가능(&amp;A)</translation>
</message>
<message>
<source>Fit to Width</source>
<translation>너비에 맞춤</translation>
</message>
<message>
<source>Fit to Height</source>
<translation>높이에 맞춤</translation>
</message>
<message>
<source>Fit to Page</source>
<translation>페이지에 맞춤</translation>
</message>
<message>
<source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
<translation>미리보기할 때 약간 지체현상이 나타나지만 Type 1 글꼴, 트루타입 글꼴, 오픈타입 글꼴, EPS, PDF 그리고 벡터그래픽에서 보기 좋습니다.</translation>
</message>
<message>
<source>Display Settings</source>
<translation>설정 보이기</translation>
</message>
<message>
<source>Print Settings</source>
<translation>인쇄 설정</translation>
</message>
<message>
<source>Mirror Page(s) Horizontal</source>
<translation>페이지 수평 미러</translation>
</message>
<message>
<source>Mirror Page(s) Vertical</source>
<translation>페이지 수직 미러</translation>
</message>
<message>
<source>Clip to Page Margins</source>
<translation>페이지 여백으로 자르기</translation>
</message>
<message>
<source>Print in Grayscale</source>
<translation>회색톤 인쇄</translation>
</message>
<message>
<source>Convert Spot Colors</source>
<translation>Spot 색상 변환</translation>
</message>
<message>
<source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
<translation>Spot 색상을 혼합 색상으로 변환 가능, Spot 색상 출력을 하지 않는다면 가능한 한 그대로 둡니다.</translation>
</message>
<message>
<source>Apply Color Profiles</source>
<translation>색상 프로파일 적용</translation>
</message>
<message>
<source>Allows you to embed color profiles in the print stream when color management is enabled</source>
<translation>컬러 관리가 가능한 경우 인쇄 스트림에 내장 색상 ICC 프로파일을 허용합니다.</translation>
</message>
</context>
<context>
<name>PSLib</name>
<message>
<source>Processing Master Page:</source>
<translation>마스터 페이지 처리 중:</translation>
</message>
<message>
<source>Exporting Page:</source>
<translation>페이지 내보내는 중:</translation>
</message>
<message>
<source>Failed to write data for an image</source>