Subversion Repositories Scribus

Compare Revisions

Ignore whitespace Rev 12917 → Rev 12918

/trunk/Scribus/translations/po/scribus.zh_TW.ts
1,8 → 1,66
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1" language="zh_TW">
<context>
<name>@default</name>
<name></name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
<source>getColorNames() -&gt; list
 
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished">
getColorNames() -&gt; list
 
傳回檔案中所有已定義顏色名稱的列表
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
<source>getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
<source>getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
13,7 → 71,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>changeColour(&quot;name&quot;, c, m, y, k)
<translation type="unfinished">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
24,6 → 82,315
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.
 
deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.
 
deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
<source>replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.
 
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
<source>newDocDialog() -&gt; bool
 
Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished">newDocDialog() -&gt; bool
 
顯示 &quot;新建檔案&quot; 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵,
檔案將不會新建. 如果新檔案已經新增, 傳回 &quot;真&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.
 
Returns the number of the button the user pressed. Button numbers start
at 1.
 
For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
BUTTONOPT_DEFAULT Pressing enter presses this button.
BUTTONOPT_ESCAPE Pressing escape presses this button.
 
Usage examples:
result = messageBox(&apos;Script failed&apos;,
&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
 
Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
<source>valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="unfinished">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
facingPages = FACINGPAGES, NOFACINGPAGES
 
firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
39,6 → 406,149
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
<source>haveDoc() -&gt; bool
 
Returns true if there is a document open.
</source>
<translation type="unfinished">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
<source>openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
May raise ScribusError if the document could not be opened.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
<source>saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.
 
If the save fails, there is currently no way to tell.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
<source>saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
 
May raise ScribusError if the save fails.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
<source>setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
 
May raise ValueError if an invalid unit is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
<source>loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
<source>setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
52,6 → 562,1130
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
<source>masterPageNames()
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
<source>createMasterPage(pageName)
 
Creates a new master page named pageName and opens it for
editing.
</source>
<translation type="unfinished">createMasterPage(pageName)
 
開新的 pageName 的主頁, 並打開它來編輯.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
<source>deleteMasterPage(pageName)
 
Delete the named master page.
</source>
<translation type="unfinished">deleteMasterPage(pageName)
 
刪除已命名的主頁
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
<source>getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
<source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
<source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
<source>getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
<source>getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
<source>getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="unfinished">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
<source>getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
<source>getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
<source>getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="unfinished">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
 
If `includesuper&apos; is true, search inherited properties too.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
<source>getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
<source>getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.
 
The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.
 
The return value varies depending on the type of the property.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</source>
<translation type="unfinished">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.
 
See getProperty() for more information.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
<source>sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
<source>getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="unfinished">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
<source>selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
<source>deselectAll()
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished">deselectAll()
 
Deselects all objects in the whole document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
<source>scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size. The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if an invalid scale factor is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
<source>loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
<source>scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.
 
May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
<source>lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.
 
May raise WrongFrameTypeError.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
<source>getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
<source>getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
<source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.
 
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
<source>setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="unfinished">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
<source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
<source>deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
<source>createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="unfinished">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
<source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
<source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
<source>createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
<source>createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point. The coordinates are given in the current measurement
units of the document (see UNIT constants). &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
87,6 → 1721,579
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="unfinished">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
<source>deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
<source>objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
<source>setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="unfinished">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
<source>getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
<source>currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
<source>redrawAll()
 
Redraws all pages.
</source>
<translation type="unfinished">redrawAll()
 
Redraws all pages.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
<source>savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
May raise ScribusError if the save failed.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
<source>deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.
 
May raise IndexError if the page number is out of range
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
<source>pageCount() -&gt; integer
 
Returns the number of pages in the document.
</source>
<translation type="unfinished">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
<source>getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="unfinished">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
 
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
<source>getVGuides()
 
See getHGuides.
</source>
<translation type="unfinished">getVGuides()
 
See getHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
<source>setVGuides()
 
See setHGuides.
</source>
<translation type="unfinished">setVGuides()
 
See setHGuides.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
<source>getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
<source>getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
<source>getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.
 
May raise ValueError if the line width is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
<source>setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation type="unfinished">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.
 
May raise ValueError if the line shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
<source>setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="unfinished">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
<source>setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="unfinished">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
<source>setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="unfinished">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
<source>setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation type="unfinished">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.
 
May raise ValueError if the fill shade is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
<source>setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
 
May raise ValueError if the corner radius is negative.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="unfinished">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
<source>createCharStyle(...)
 
148,6 → 2355,729
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
<source>getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
<source>getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
<source>getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
<source>getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
<source>getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
<source>getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
<source>setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError if the font cannot be found.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
<source>setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="unfinished">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.
 
May throw ValueError for a font size that&apos;s out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
<source>setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.
 
May throw ValueError if the line spacing is out of bounds.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
<source>setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
<source>setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May throw ValueError if number of columns is not at least one.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
<source>setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).
 
May throw ValueError for an invalid alignment constant.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
<source>selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw IndexError if the selection is outside the bounds of the text.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
<source>deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
<source>setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
<source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
<source>setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
<source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
<source>unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;
 
May throw ScribusException if linking rules are violated.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
<source>traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
<source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.
 
May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
<source>isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
<source>progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
<source>progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="unfinished">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
<source>setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
<source>docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="unfinished">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
<source>zoomDocument(double)
 
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation type="unfinished">zoomDocument(double)
 
在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
<source>changeColor(&quot;name&quot;, c, m, y, k)
 
Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.
 
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)
 
Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.
 
May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
<source>closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</source>
<translation type="obsolete">closeDoc()
 
Closes the current document without prompting to save.
 
May throw NoDocOpenError if there is no document to close
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
<source>closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
<translation type="obsolete">closeMasterPage()
 
Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
<source>createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve. The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
<source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
159,7 → 3089,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
182,7 → 3112,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
201,7 → 3131,7
 
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">createLayer(layer)
<translation type="obsolete">createLayer(layer)
 
Creates a new layer with the name &quot;name&quot;.
 
220,7 → 3150,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string
 
Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
238,59 → 3168,12
Creates a new master page named pageName and opens it for
editing.
</source>
<translation>createMasterPage(pageName)
<translation type="obsolete">createMasterPage(pageName)
 
開新的 pageName 的主頁, 並打開它來編輯.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
<source>createParagraphStyle(...)
 
Creates a paragraph style. This function takes the following keyword parameters:
 
&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create
 
linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:
 
fixed linespacing: 0
 
automatic linespacing: 1
 
baseline grid linespacing: 2
 
linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing
 
alignment [optional] -&gt; specifies the alignment of the paragraph
 
-&gt; left: 0
 
-&gt; center: 1
 
-&gt; right: 2
 
-&gt; justify: 3
 
-&gt; extend: 4
 
leftmargin [optional], rightmargin [optional] -&gt; specify the margin
 
gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs
 
firstindent [optional] -&gt; the indent of the first line
 
hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)
 
dropcaplines [optional] -&gt; height (in lines) of the caps if used
 
dropcapoffset [optional] -&gt; offset of the caps if used
 
&quot;charstyle&quot; [optional] -&gt; char style to use
 
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
<source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
303,7 → 3186,7
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
<translation type="unfinished">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string
 
Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
332,7 → 3215,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished">createPolygon(list, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
363,7 → 3246,7
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
<translation type="unfinished">createPolyLine(list, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string
 
Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
378,20 → 3261,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
<source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
<source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
403,7 → 3272,7
 
May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
<translation type="unfinished">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
<translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string
 
Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
421,7 → 3290,7
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
<translation type="unfinished">currentPage() -&gt; integer
<translation type="obsolete">currentPage() -&gt; integer
 
Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
447,29 → 3316,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
<source>defineColor(&quot;name&quot;, c, m, y, k)
 
Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.
 
May raise ValueError if an invalid color name is specified.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
<source>dehyphenateText([&quot;name&quot;]) -&gt; bool
 
Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
<source>deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
483,7 → 3329,7
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>deleteColor(&quot;name&quot;, &quot;replace&quot;)
<translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)
 
Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
506,7 → 3352,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">deleteLayer(&quot;layer&quot;)
<translation type="obsolete">deleteLayer(&quot;layer&quot;)
 
Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.
521,7 → 3367,7
 
Delete the named master page.
</source>
<translation>deleteMasterPage(pageName)
<translation type="obsolete">deleteMasterPage(pageName)
 
刪除已命名的主頁
</translation>
533,7 → 3379,7
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
<translation type="unfinished">deleteObject([&quot;name&quot;])
<translation type="obsolete">deleteObject([&quot;name&quot;])
 
Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
549,7 → 3395,7
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished">deletePage(nr)
<translation type="obsolete">deletePage(nr)
 
Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
566,7 → 3412,7
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">deleteText([&quot;name&quot;])
<translation type="obsolete">deleteText([&quot;name&quot;])
 
Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
579,7 → 3425,7
 
Deselects all objects in the whole document.
</source>
<translation type="unfinished">deselectAll()
<translation type="obsolete">deselectAll()
 
Deselects all objects in the whole document.
</translation>
592,7 → 3438,7
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
<translation type="unfinished">docChanged(bool)
<translation type="obsolete">docChanged(bool)
 
Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
600,14 → 3446,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
<source>duplicateObject([&quot;name&quot;]) -&gt; string
 
creates a Duplicate of the selected Object (or Selection Group).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
<source>editMasterPage(pageName)
 
614,7 → 3452,7
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
<translation type="unfinished">editMasterPage(pageName)
<translation type="obsolete">editMasterPage(pageName)
 
Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
662,35 → 3500,12
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
<source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename
 
Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it. A value of
True for haspreview enables a small preview widget in the FileSelect box. When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.
 
The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.
 
Refer to the Qt-Documentation for QFileDialog for details on filters.
 
Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
<source>getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</source>
<translation type="unfinished">getActiveLayer() -&gt; string
<translation type="obsolete">getActiveLayer() -&gt; string
 
Returns the name of the current active layer.
</translation>
701,7 → 3516,7
 
Returns a list containing the names of all objects on the current page.
</source>
<translation type="unfinished">getAllObjects() -&gt; list
<translation type="obsolete">getAllObjects() -&gt; list
 
Returns a list containing the names of all objects on the current page.
</translation>
712,7 → 3527,7
 
Return a list of the names of all paragraph styles in the current document.
</source>
<translation type="unfinished">getAllStyles() -&gt; list
<translation type="obsolete">getAllStyles() -&gt; list
 
Return a list of the names of all paragraph styles in the current document.
</translation>
726,7 → 3541,7
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished">getAllText([&quot;name&quot;]) -&gt; string
<translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
779,7 → 3594,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColor(&quot;name&quot;) -&gt; tuple
<translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
801,7 → 3616,7
May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>getColorAsRGB(&quot;name&quot;) -&gt; tuple
<translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple
 
Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
819,7 → 3634,7
Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
<translation type="unfinished">
<translation type="obsolete">
getColorNames() -&gt; list
 
傳回檔案中所有已定義顏色名稱的列表
833,7 → 3648,7
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getColumnGap([&quot;name&quot;]) -&gt; float
<translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float
 
Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
846,7 → 3661,7
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished">getColumns([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer
 
Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
853,16 → 3668,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>getCornerRadius([&quot;name&quot;]) -&gt; integer
 
874,24 → 3679,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
<source>getFillBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
<source>getFillColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
<source>getFillShade([&quot;name&quot;]) -&gt; integer
 
898,7 → 3685,7
Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getFillShade([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
905,15 → 3692,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
<source>getFillTransparency([&quot;name&quot;]) -&gt; float
 
Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
<source>getFont([&quot;name&quot;]) -&gt; string
 
922,7 → 3700,7
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">getFont([&quot;name&quot;]) -&gt; string
<translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string
 
Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
936,29 → 3714,18
 
Returns a list with the names of all available fonts.
</source>
<translation type="unfinished">getFontNames() -&gt; list
<translation type="obsolete">getFontNames() -&gt; list
 
Returns a list with the names of all available fonts.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
<source>getFontSize([&quot;name&quot;]) -&gt; float
 
Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
<source>getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</source>
<translation type="unfinished">getGuiLanguage() -&gt; string
<translation type="obsolete">getGuiLanguage() -&gt; string
 
Returns a string with the -lang value.
</translation>
970,7 → 3737,7
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
<translation type="unfinished">getHGuides() -&gt; list
<translation type="obsolete">getHGuides() -&gt; list
 
Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
983,7 → 3750,7
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished">getImageName([&quot;name&quot;]) -&gt; string
<translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string
 
Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
996,7 → 3763,7
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getImageScale([&quot;name&quot;]) -&gt; (x,y)
<translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;. If &quot;name&quot; is not given the currently selected item is used.
1003,48 → 3770,17
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
<source>getLayerBlendmode(&quot;layer&quot;) -&gt; int
 
Returns the &quot;layer&quot; layer blendmode,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
<source>getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</source>
<translation type="unfinished">getLayers() -&gt; list
<translation type="obsolete">getLayers() -&gt; list
 
Returns a list with the names of all defined layers.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
<source>getLayerTransparency(&quot;layer&quot;) -&gt; float
 
Returns the &quot;layer&quot; layer transparency,
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
<source>getLineBlendmode([&quot;name&quot;]) -&gt; integer
 
Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
<source>getLineColor([&quot;name&quot;]) -&gt; string
 
1051,7 → 3787,7
Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineColor([&quot;name&quot;]) -&gt; string
<translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string
 
Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1065,7 → 3801,7
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
<translation type="unfinished">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
<translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
1073,16 → 3809,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used. The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)
 
1104,7 → 3830,7
Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation>getLineShade([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer
 
Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1117,7 → 3843,7
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getLineSpacing([&quot;name&quot;]) -&gt; float
<translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float
 
Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
1131,7 → 3857,7
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
<translation type="unfinished">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
<translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)
 
Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
1139,15 → 3865,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
<source>getLineTransparency([&quot;name&quot;]) -&gt; float
 
Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
<source>getLineWidth([&quot;name&quot;]) -&gt; integer
 
1154,7 → 3871,7
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
<translation type="unfinished">getLineWidth([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer
 
Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
1169,7 → 3886,7
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
<translation type="unfinished">getPageItems() -&gt; list
<translation type="obsolete">getPageItems() -&gt; list
 
Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
1184,7 → 3901,7
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
<translation type="unfinished">getPageMargins()
<translation type="obsolete">getPageMargins()
 
Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
1197,7 → 3914,7
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
<translation type="unfinished">getPageSize() -&gt; tuple
<translation type="obsolete">getPageSize() -&gt; tuple
 
Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
1204,25 → 3921,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
<source>getPageType() -&gt; integer
 
Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>getPosition([&quot;name&quot;]) -&gt; (x,y)
 
1252,7 → 3950,7
 
The return value varies depending on the type of the property.
</source>
<translation type="unfinished">getProperty(object, property)
<translation type="obsolete">getProperty(object, property)
 
Return the value of the property `property&apos; of the passed `object&apos;.
 
1275,7 → 3973,7
 
If `includesuper&apos; is true, search inherited properties too.
</source>
<translation type="unfinished">getPropertyCType(object, property, includesuper=True)
<translation type="obsolete">getPropertyCType(object, property, includesuper=True)
 
Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.
1291,7 → 3989,7
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
<translation type="unfinished">getPropertyNames(object, includesuper=True)
<translation type="obsolete">getPropertyNames(object, includesuper=True)
 
Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
1306,7 → 4004,7
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
<translation type="unfinished">getRotation([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer
 
Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
1321,7 → 4019,7
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
<translation type="unfinished">getSelectedObject([nr]) -&gt; string
<translation type="obsolete">getSelectedObject([nr]) -&gt; string
 
Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
1337,7 → 4035,7
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
<translation type="unfinished">getSize([&quot;name&quot;]) -&gt; (width,height)
<translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)
 
Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
1354,7 → 4052,7
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">getText([&quot;name&quot;]) -&gt; string
<translation type="obsolete">getText([&quot;name&quot;]) -&gt; string
 
Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
1369,7 → 4067,7
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished">getTextLength([&quot;name&quot;]) -&gt; integer
<translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer
 
Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
1376,15 → 4074,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
<source>getTextLines([&quot;name&quot;]) -&gt; integer
 
Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
<source>getUnit() -&gt; integer (Scribus unit constant)
 
1392,7 → 4081,7
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
<translation type="unfinished">getUnit() -&gt; integer (Scribus unit constant)
<translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)
 
Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
1405,7 → 4094,7
 
See getHGuides.
</source>
<translation type="unfinished">getVGuides()
<translation type="obsolete">getVGuides()
 
See getHGuides.
</translation>
1417,7 → 4106,7
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
<translation type="unfinished">getXFontNames() -&gt; list of tuples
<translation type="obsolete">getXFontNames() -&gt; list of tuples
 
Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
1443,18 → 4132,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
<source>gotoPage(nr)
 
Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.
 
May raise IndexError if the page number is out of range.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
<source>groupObjects(list)
 
1462,7 → 4139,7
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
<translation type="unfinished">groupObjects(list)
<translation type="obsolete">groupObjects(list)
 
Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
1475,36 → 4152,12
 
Returns true if there is a document open.
</source>
<translation type="unfinished">haveDoc() -&gt; bool
<translation type="obsolete">haveDoc() -&gt; bool
 
Returns true if there is a document open.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
<source>hyphenateText([&quot;name&quot;]) -&gt; bool
 
Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
<source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])
 
Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
1526,57 → 4179,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
<source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])
 
Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.
 
May throw IndexError for an insertion out of bounds.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
<source>isLayerFlow(&quot;layer&quot;) -&gt; bool
 
Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
<source>isLayerLocked(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
<source>isLayerOutlined(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
<source>isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
1587,7 → 4189,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">isLayerPrintable(&quot;layer&quot;) -&gt; bool
<translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
1619,19 → 4221,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
<source>isLayerVisible(&quot;layer&quot;) -&gt; bool
 
Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
<source>isLocked([&quot;name&quot;]) -&gt; bool
 
1638,7 → 4227,7
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation type="unfinished">isLocked([&quot;name&quot;]) -&gt; bool
<translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool
 
Returns true if is the object &quot;name&quot; locked. If &quot;name&quot; is not given the
currently selected item is used.
1653,7 → 4242,7
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished">isPDFBookmark([&quot;name&quot;]) -&gt; bool
<translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool
 
Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.
1671,7 → 4260,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
<translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)
 
Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
1689,7 → 4278,7
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished">loadImage(&quot;filename&quot; [, &quot;name&quot;])
<translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])
 
Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.
1704,7 → 4293,7
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
<translation type="unfinished">loadStylesFromFile(&quot;filename&quot;)
<translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)
 
Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
1718,7 → 4307,7
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
<translation type="unfinished">lockObject([&quot;name&quot;]) -&gt; bool
<translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool
 
Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
1731,21 → 4320,12
 
Returns a list of the names of all master pages in the document.
</source>
<translation type="unfinished">masterPageNames()
<translation type="obsolete">masterPageNames()
 
Returns a list of the names of all master pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
<source>messagebarText(&quot;string&quot;)
 
Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
<source>messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
1780,7 → 4360,7
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
<translation type="unfinished">messageBox(&quot;caption&quot;, &quot;message&quot;,
<translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
 
1815,17 → 4395,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
<source>moveObject(dx, dy [, &quot;name&quot;])
 
Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
<source>moveObjectAbs(x, y [, &quot;name&quot;])
 
1834,7 → 4403,7
is not given the currently selected item is used. If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
<translation type="unfinished">moveObjectAbs(x, y [, &quot;name&quot;])
<translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])
 
Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants). If &quot;name&quot;
1843,22 → 4412,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
<source>moveSelectionToFront()
 
Moves current selection to back.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
<source>moveSelectionToFront()
 
Moves current selection to front.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
<source>newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
1895,7 → 4448,7
example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
FACINGPAGES, FIRSTPAGERIGHT)
</source>
<translation type="unfinished">newDoc(size, margins, orientation, firstPageNumber,
<translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
unit, facingPages, firstSideLeft) -&gt; bool
 
WARNING: Obsolete procedure! Use newDocument instead.
1939,7 → 4492,7
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
<translation type="unfinished">newDocDialog() -&gt; bool
<translation type="obsolete">newDocDialog() -&gt; bool
 
顯示 &quot;新建檔案&quot; 對話視窗, 如果使用者接受設定值, 則開啟新的檔案. 如果使用者案取消鍵,
檔案將不會新建. 如果新檔案已經新增, 傳回 &quot;真&quot;.
1946,64 → 4499,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
<source>newDocument(size, margins, orientation, firstPageNumber,
unit, pagesType, firstPageOrder, numPages) -&gt; bool
 
Creates a new document and returns true if successful. The parameters have the
following meaning:
 
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.
 
margins = A tuple (left, right, top, bottom) describing the document
margins
 
orientation = the page orientation - constants PORTRAIT, LANDSCAPE
 
firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.
 
unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.
 
pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.
 
firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).
 
numPage = Number of pages to be created.
 
The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.
 
example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)
 
May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
<source>newPage(where [,&quot;masterpage&quot;])
 
Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.
 
May raise IndexError if the page number is out of range
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
<source>newStyleDialog() -&gt; string
 
2010,7 → 4505,7
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
<translation type="unfinished">newStyleDialog() -&gt; string
<translation type="obsolete">newStyleDialog() -&gt; string
 
Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
2024,7 → 4519,7
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
<translation type="unfinished">objectExists([&quot;name&quot;]) -&gt; bool
<translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool
 
Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
2039,7 → 4534,7
 
May raise ScribusError if the document could not be opened.
</source>
<translation type="unfinished">openDoc(&quot;name&quot;)
<translation type="obsolete">openDoc(&quot;name&quot;)
 
Opens the document &quot;name&quot;.
 
2052,56 → 4547,12
 
Returns the number of pages in the document.
</source>
<translation type="unfinished">pageCount() -&gt; integer
<translation type="obsolete">pageCount() -&gt; integer
 
Returns the number of pages in the document.
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
<source>placeEPS(&quot;filename&quot;, x, y)
 
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
 
If loading was successful, the selection contains the imported EPS
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
<source>placeODG(&quot;filename&quot;, x, y)
 
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
 
If loading was successful, the selection contains the imported ODG
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
<source>placeSVG(&quot;filename&quot;, x, y)
 
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
 
If loading was successful, the selection contains the imported SVG
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
<source>placeSXD(&quot;filename&quot;, x, y)
 
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
 
If loading was successful, the selection contains the imported SXD
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
<source>progressReset()
 
2108,7 → 4559,7
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
<translation type="unfinished">progressReset()
<translation type="obsolete">progressReset()
 
Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
2126,7 → 4577,7
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
<translation type="unfinished">progressSet(nr)
<translation type="obsolete">progressSet(nr)
 
Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
2144,7 → 4595,7
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
<translation type="unfinished">progressTotal(max)
<translation type="obsolete">progressTotal(max)
 
Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
2156,7 → 4607,7
 
Redraws all pages.
</source>
<translation type="unfinished">redrawAll()
<translation type="obsolete">redrawAll()
 
Redraws all pages.
</translation>
2174,7 → 4625,7
May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
<translation type="unfinished">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
<translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool
 
Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
2195,7 → 4646,7
May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
<translation>replaceColor(&quot;name&quot;, &quot;replace&quot;)
<translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)
 
Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.
 
2204,18 → 4655,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>rotateObject(rot [, &quot;name&quot;])
 
2235,16 → 4674,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>rotateObjectAbs(rot [, &quot;name&quot;])
 
2269,7 → 4698,7
 
If the save fails, there is currently no way to tell.
</source>
<translation type="unfinished">saveDoc()
<translation type="obsolete">saveDoc()
 
Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
2300,7 → 4729,7
 
May raise ScribusError if the save fails.
</source>
<translation type="unfinished">saveDocAs(&quot;name&quot;)
<translation type="obsolete">saveDocAs(&quot;name&quot;)
 
Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).
2316,7 → 4745,7
 
May raise ScribusError if the save failed.
</source>
<translation type="unfinished">savePageAsEPS(&quot;name&quot;)
<translation type="obsolete">savePageAsEPS(&quot;name&quot;)
 
Saves the current page as an EPS to the file &quot;name&quot;.
 
2335,7 → 4764,7
 
May raise ValueError if an invalid scale factor is passed.
</source>
<translation type="unfinished">scaleGroup(factor [,&quot;name&quot;])
<translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])
 
Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
2356,7 → 4785,7
 
May raise WrongFrameTypeError if the target frame is not an image frame
</source>
<translation type="unfinished">scaleImage(x, y [, &quot;name&quot;])
<translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])
 
Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
2366,20 → 4795,12
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
<source>scrollDocument(x,y)
 
Scroll the document in main GUI window by x and y.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
<source>selectionCount() -&gt; integer
 
Returns the number of selected objects.
</source>
<translation type="unfinished">selectionCount() -&gt; integer
<translation type="obsolete">selectionCount() -&gt; integer
 
Returns the number of selected objects.
</translation>
2390,7 → 4811,7
 
Selects the object with the given &quot;name&quot;.
</source>
<translation type="unfinished">selectObject(&quot;name&quot;)
<translation type="obsolete">selectObject(&quot;name&quot;)
 
Selects the object with the given &quot;name&quot;.
</translation>
2406,7 → 4827,7
 
May throw IndexError if the selection is outside the bounds of the text.
</source>
<translation type="unfinished">selectText(start, count, [&quot;name&quot;])
<translation type="obsolete">selectText(start, count, [&quot;name&quot;])
 
Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
2426,7 → 4847,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
<translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])
 
Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.
2444,7 → 4865,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">setActiveLayer(&quot;name&quot;)
<translation type="obsolete">setActiveLayer(&quot;name&quot;)
 
Sets the active layer to the layer named &quot;name&quot;.
 
2461,7 → 4882,7
 
May throw ValueError if the column gap is out of bounds (must be positive).
</source>
<translation type="unfinished">setColumnGap(size, [&quot;name&quot;])
<translation type="obsolete">setColumnGap(size, [&quot;name&quot;])
 
Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.
2478,7 → 4899,7
 
May throw ValueError if number of columns is not at least one.
</source>
<translation type="unfinished">setColumns(nr, [&quot;name&quot;])
<translation type="obsolete">setColumns(nr, [&quot;name&quot;])
 
Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2495,7 → 4916,7
 
May raise ValueError if the corner radius is negative.
</source>
<translation type="unfinished">setCornerRadius(radius, [&quot;name&quot;])
<translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])
 
Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.
2509,7 → 4930,7
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
<translation type="unfinished">setCursor()
<translation type="obsolete">setCursor()
 
[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
2523,7 → 4944,7
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
<translation type="unfinished">setDocType(facingPages, firstPageLeft)
<translation type="obsolete">setDocType(facingPages, firstPageLeft)
 
Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead. If you want
2532,15 → 4953,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
<source>setFillBlendmode(blendmode, [&quot;name&quot;])
 
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
<source>setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
2548,7 → 4960,7
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
<translation>setFillColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
2566,7 → 4978,7
 
May raise ValueError if the fill shade is out of bounds.
</source>
<translation>setFillShade(shade, [&quot;name&quot;])
<translation type="obsolete">setFillShade(shade, [&quot;name&quot;])
 
Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2577,15 → 4989,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
<source>setFillTransparency(transparency, [&quot;name&quot;])
 
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
<source>setFont(&quot;font&quot;, [&quot;name&quot;])
 
2595,7 → 4998,7
 
May throw ValueError if the font cannot be found.
</source>
<translation type="unfinished">setFont(&quot;font&quot;, [&quot;name&quot;])
<translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])
 
Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed. If &quot;name&quot; is not given the
2615,7 → 5018,7
 
May throw ValueError for a font size that&apos;s out of bounds.
</source>
<translation type="unfinished">setFontSize(size, [&quot;name&quot;])
<translation type="obsolete">setFontSize(size, [&quot;name&quot;])
 
Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
2626,16 → 5029,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
<source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])
 
Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
<source>setHGuides(list)
 
2645,7 → 5038,7
Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
setHGuides([90,250]) # replace current guides entirely
</source>
<translation type="unfinished">setHGuides(list)
<translation type="obsolete">setHGuides(list)
 
Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.
2655,62 → 5048,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
<source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool
 
Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
<source>setLayerBlendmode(&quot;layer&quot;, blend)
 
Sets the layers &quot;layer&quot; blendmode to blend.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
<source>setLayerFlow(&quot;layer&quot;, flow)
 
Sets the layers &quot;layer&quot; flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
<source>setLayerLocked(&quot;layer&quot;, locked)
 
Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
<source>setLayerOutlined(&quot;layer&quot;, outline)
 
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
2730,29 → 5067,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
<source>setLayerPrintable(&quot;layer&quot;, printable)
 
Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
<source>setLayerTransparency(&quot;layer&quot;, trans)
 
Sets the layers &quot;layer&quot; transparency to trans.
 
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
<source>setLayerVisible(&quot;layer&quot;, visible)
 
2762,7 → 5076,7
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
<translation type="unfinished">setLayerVisible(&quot;layer&quot;, visible)
<translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)
 
Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.
2772,15 → 5086,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
<source>setLineBlendmode(blendmode, [&quot;name&quot;])
 
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
<source>setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
2787,7 → 5092,7
Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation>setLineColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
2801,7 → 5106,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
<translation type="unfinished">setLineEnd(endtype, [&quot;name&quot;])
<translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])
 
Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
2816,7 → 5121,7
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
<translation type="unfinished">setLineJoin(join, [&quot;name&quot;])
<translation type="obsolete">setLineJoin(join, [&quot;name&quot;])
 
Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
2834,7 → 5139,7
 
May raise ValueError if the line shade is out of bounds.
</source>
<translation>setLineShade(shade, [&quot;name&quot;])
<translation type="obsolete">setLineShade(shade, [&quot;name&quot;])
 
Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
2854,7 → 5159,7
 
May throw ValueError if the line spacing is out of bounds.
</source>
<translation type="unfinished">setLineSpacing(size, [&quot;name&quot;])
<translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])
 
Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
2871,7 → 5176,7
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
<translation type="unfinished">setLineStyle(style, [&quot;name&quot;])
<translation type="obsolete">setLineStyle(style, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
2879,15 → 5184,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
<source>setLineTransparency(transparency, [&quot;name&quot;])
 
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
<source>setLineWidth(width, [&quot;name&quot;])
 
2897,7 → 5193,7
 
May raise ValueError if the line width is out of bounds.
</source>
<translation type="unfinished">setLineWidth(width, [&quot;name&quot;])
<translation type="obsolete">setLineWidth(width, [&quot;name&quot;])
 
Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
2922,16 → 5218,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
<source>setMargins(lr, rr, tr, br)
 
Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
<source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
2940,7 → 5226,7
 
May raise NotFoundError if the line style doesn&apos;t exist.
</source>
<translation type="unfinished">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
<translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])
 
Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.
2966,17 → 5252,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
<source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])
 
Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.
 
May raise WrongFrameTypeError if the target frame is not a text frame
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
<source>setProperty(object, property, value)
 
2986,7 → 5261,7
 
See getProperty() for more information.
</source>
<translation type="unfinished">setProperty(object, property, value)
<translation type="obsolete">setProperty(object, property, value)
 
Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
2996,16 → 5271,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
<source>setRedraw(bool)
 
Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
<source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
3015,7 → 5280,7
 
May raise WrongFrameTypeError.
</source>
<translation type="unfinished">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
<translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)
 
Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
3031,7 → 5296,7
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
<translation type="unfinished">setStyle(&quot;style&quot; [, &quot;name&quot;])
<translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])
 
Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
3046,7 → 5311,7
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation type="unfinished">setText(&quot;text&quot;, [&quot;name&quot;])
<translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])
 
Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
3064,7 → 5329,7
 
May throw ValueError for an invalid alignment constant.
</source>
<translation type="unfinished">setTextAlignment(align, [&quot;name&quot;])
<translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])
 
Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
3081,7 → 5346,7
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
<translation>setTextColor(&quot;color&quot;, [&quot;name&quot;])
<translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])
 
Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
3098,7 → 5363,7
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
<translation>setTextShade(shade, [&quot;name&quot;])
<translation type="obsolete">setTextShade(shade, [&quot;name&quot;])
 
Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
3114,7 → 5379,7
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
<translation type="unfinished">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
<translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])
 
Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
3129,7 → 5394,7
 
May raise ValueError if an invalid unit is passed.
</source>
<translation type="unfinished">setUnit(type)
<translation type="obsolete">setUnit(type)
 
Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.
3143,7 → 5408,7
 
See setHGuides.
</source>
<translation type="unfinished">setVGuides()
<translation type="obsolete">setVGuides()
 
See setHGuides.
</translation>
3155,7 → 5420,7
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished">sizeObject(width, height [, &quot;name&quot;])
<translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])
 
Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
3162,20 → 5427,6
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
<source>textFlowMode(&quot;name&quot; [, state])
 
Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="" line="7471221"/>
<source>textFlowsAroundFrame(&quot;name&quot; [, state])
 
3200,7 → 5451,7
 
May raise WrongFrameTypeError if the target frame is not an text frame
</source>
<translation type="unfinished">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
<translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer
 
Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
3215,7 → 5466,7
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
<translation type="unfinished">traceText([&quot;name&quot;])
<translation type="obsolete">traceText([&quot;name&quot;])
 
Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
3225,7 → 5476,7
<source>unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
<translation type="unfinished">unGroupObjects(&quot;name&quot;)
<translation type="obsolete">unGroupObjects(&quot;name&quot;)
 
Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
</message>
3239,7 → 5490,7
 
May throw ScribusException if linking rules are violated.
</source>
<translation type="unfinished">unlinkTextFrames(&quot;name&quot;)
<translation type="obsolete">unlinkTextFrames(&quot;name&quot;)
 
Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
3257,7 → 5508,7
 
Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
<translation type="unfinished">valueDialog(caption, message [,defaultvalue]) -&gt; string
<translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string
 
Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.
3272,53 → 5523,31
Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
<translation>zoomDocument(double)
<translation type="obsolete">zoomDocument(double)
 
在主視窗縮放文件, 縮放值如: 20.0, 100.0 等, 縮放並符合視窗大小已 -100 為記號(為主).
</translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
<source>getTextDistances([&quot;name&quot;]) -&gt; tuple
 
Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
<source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])
 
Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.
 
May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AIPlug</name>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="127"/>
<source>Analyzing File:</source>
<translation>分析檔案:</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2251"/>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2228"/>
<source>Generating Items</source>
<translation>產生物件中</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="289"/>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="264"/>
<source>Group%1</source>
<translation>群組%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
<location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="124"/>
<source>Importing: %1</source>
<translation>正在匯入: %1</translation>
</message>
3694,37 → 5923,37
<translation type="obsolete">%1 % (&amp;%)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1291"/>
<location filename="../../scribus/actionmanager.cpp" line="1296"/>
<source>%1 pt</source>
<translation type="unfinished">%1 pt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1387"/>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<source>&amp;100%</source>
<translation>&amp;100%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<source>&amp;200%</source>
<translation>&amp;200%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<source>&amp;400%</source>
<translation>&amp;400%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<source>&amp;50%</source>
<translation>&amp;50%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1386"/>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<source>&amp;75%</source>
<translation>&amp;75%</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<location filename="../../scribus/actionmanager.cpp" line="1472"/>
<source>&amp;About Plugins</source>
<translation>關於插件 (&amp;A)</translation>
</message>
3734,42 → 5963,42
<translation type="obsolete">關於插件 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<source>About &amp;Qt</source>
<translation>關於 &amp;Qt</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1466"/>
<location filename="../../scribus/actionmanager.cpp" line="1471"/>
<source>&amp;About Scribus</source>
<translation>關於 Scribus (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<location filename="../../scribus/actionmanager.cpp" line="1422"/>
<source>Action &amp;History</source>
<translation>歷史動作 (&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<source>Adjust Frame to Image</source>
<translation>調整框體適應圖片大小</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<source>Advanced Select All...</source>
<translation>進階全部選擇...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<location filename="../../scribus/actionmanager.cpp" line="1424"/>
<source>&amp;Align and Distribute</source>
<translation>對齊和分佈 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1313"/>
<location filename="../../scribus/actionmanager.cpp" line="1318"/>
<source>&amp;All Caps</source>
<translation>全部大寫 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<source>Annotation P&amp;roperties</source>
<translation>注釋屬性 (&amp;R)</translation>
</message>
3779,68 → 6008,68
<translation type="obsolete">上標點</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<source>Apostrophe</source>
<comment>Unicode 0x0027</comment>
<translation>上標點</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1250"/>
<location filename="../../scribus/actionmanager.cpp" line="1255"/>
<source>Append &amp;Text...</source>
<translation>追加文字 (&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<location filename="../../scribus/actionmanager.cpp" line="1382"/>
<source>&amp;Apply Master Page...</source>
<translation>套用主頁 (&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1414"/>
<location filename="../../scribus/actionmanager.cpp" line="1419"/>
<source>&amp;Arrange Pages</source>
<translation>安排頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<source>&amp;Attach Text to Path</source>
<translation>將文字附到路徑上 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<source>&amp;Attributes...</source>
<translation>特性 (&amp;A)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
<location filename="../../scribus/actionmanager.cpp" line="1364"/>
<source>&amp;Bezier Curve</source>
<translation>貝茲曲線 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1297"/>
<location filename="../../scribus/actionmanager.cpp" line="1302"/>
<source>&amp;Block</source>
<translation>區塊 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<source>&amp;Bookmarks</source>
<translation>書籤 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1502"/>
<location filename="../../scribus/actionmanager.cpp" line="1508"/>
<source>Bullet</source>
<translation>項目符號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<location filename="../../scribus/actionmanager.cpp" line="1467"/>
<source>&amp;Cascade</source>
<translation>層疊 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1295"/>
<location filename="../../scribus/actionmanager.cpp" line="1300"/>
<source>&amp;Center</source>
<translation>中間 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<location filename="../../scribus/actionmanager.cpp" line="1481"/>
<source>Check for Updates</source>
<translation>檢查是否有更新</translation>
</message>
3850,7 → 6079,7
<translation type="obsolete">中日韓雙左</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1525"/>
<location filename="../../scribus/actionmanager.cpp" line="1531"/>
<source>CJK Double Left</source>
<comment>Unicode 0x300E</comment>
<translation>中日韓雙左</translation>
3861,7 → 6090,7
<translation type="obsolete">中日韓雙右</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
<location filename="../../scribus/actionmanager.cpp" line="1532"/>
<source>CJK Double Right</source>
<comment>Unicode 0x300F</comment>
<translation>中日韓雙右</translation>
3872,7 → 6101,7
<translation type="obsolete">中日韓左單</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<location filename="../../scribus/actionmanager.cpp" line="1529"/>
<source>CJK Single Left</source>
<comment>Unicode 0x300C</comment>
<translation>中日韓左單</translation>
3883,13 → 6112,13
<translation type="obsolete">中日韓右單</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<location filename="../../scribus/actionmanager.cpp" line="1530"/>
<source>CJK Single Right</source>
<comment>Unicode 0x300D</comment>
<translation>中日韓右單</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1272"/>
<location filename="../../scribus/actionmanager.cpp" line="1277"/>
<source>C&amp;lear</source>
<translation>清除 (&amp;L)</translation>
</message>
3899,92 → 6128,92
<translation type="obsolete">清除內容 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1244"/>
<location filename="../../scribus/actionmanager.cpp" line="1249"/>
<source>&amp;Close</source>
<translation type="unfinished">關閉 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1248"/>
<location filename="../../scribus/actionmanager.cpp" line="1253"/>
<source>Collect for O&amp;utput...</source>
<translation>準備輸出 (&amp;U)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1279"/>
<location filename="../../scribus/actionmanager.cpp" line="1284"/>
<source>C&amp;olors...</source>
<translation>顔色 (&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<location filename="../../scribus/actionmanager.cpp" line="1501"/>
<source>Column Break</source>
<translation>分列</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1357"/>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<source>&amp;Combine Polygons</source>
<translation>合併多邊形 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<source>Convert to Master Page...</source>
<translation>轉換爲主頁...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1269"/>
<location filename="../../scribus/actionmanager.cpp" line="1274"/>
<source>&amp;Copy</source>
<translation type="unfinished">複製 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<location filename="../../scribus/actionmanager.cpp" line="1439"/>
<source>Copy Item Properties</source>
<translation>複製物件屬性</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1375"/>
<location filename="../../scribus/actionmanager.cpp" line="1380"/>
<source>&amp;Copy...</source>
<translation type="unfinished">複製 (&amp;C)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1498"/>
<location filename="../../scribus/actionmanager.cpp" line="1504"/>
<source>Copyright</source>
<translation>版權</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<source>Cu&amp;t</source>
<translation type="unfinished">剪下 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1458"/>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<source>Dehyphenate Text</source>
<translation>取消連字元</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<source>&amp;Delete</source>
<translation>刪除 (&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<source>&amp;Delete...</source>
<translation>刪除 (&amp;D)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
<source>&amp;Deselect All</source>
<translation>取消全選 (&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<source>&amp;Detach Text from Path</source>
<translation>從路徑分離文字 (&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<location filename="../../scribus/actionmanager.cpp" line="1262"/>
<source>Document &amp;Setup...</source>
<translation>檔案設定 (&amp;S)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<source>Double Left</source>
<comment>Unicode 0x201C</comment>
<translation>雙面左邊</translation>
4000,7 → 6229,7
<translation type="obsolete">左雙引號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1519"/>
<location filename="../../scribus/actionmanager.cpp" line="1525"/>
<source>Double Left Guillemet</source>
<comment>Unicode 0x00AB</comment>
<translation>左雙引號</translation>
4011,7 → 6240,7
<translation type="obsolete">雙面反轉</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<source>Double Reversed</source>
<comment>Unicode 0x201F</comment>
<translation>雙面反轉</translation>
4022,13 → 6251,13
<translation type="obsolete">雙面右邊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1514"/>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<source>Double Right</source>
<comment>Unicode 0x201D</comment>
<translation>雙面右邊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1520"/>
<location filename="../../scribus/actionmanager.cpp" line="1526"/>
<source>Double Right Guillemet</source>
<comment>Unicode 0x00BB</comment>
<translation>右雙引號</translation>
4039,32 → 6268,32
<translation type="obsolete">右雙引號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1324"/>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<source>D&amp;uplicate</source>
<translation>複製 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<location filename="../../scribus/actionmanager.cpp" line="1434"/>
<source>Edit Contents of Frame</source>
<translation>編輯框內容</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1277"/>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<source>Edit Image...</source>
<translation>編輯圖片...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<location filename="../../scribus/actionmanager.cpp" line="1359"/>
<source>&amp;Edit Shape...</source>
<translation>編輯形狀 (&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1278"/>
<location filename="../../scribus/actionmanager.cpp" line="1283"/>
<source>Edit Source...</source>
<translation>編輯來源...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<location filename="../../scribus/actionmanager.cpp" line="1435"/>
<source>Edit Text...</source>
<translation>編輯文字...</translation>
</message>
4074,62 → 6303,62
<translation type="obsolete">用故事編輯器編輯文字</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1504"/>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<source>Em Dash</source>
<translation>Em 破折號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1529"/>
<location filename="../../scribus/actionmanager.cpp" line="1535"/>
<source>Em Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<source>En Dash</source>
<translation>En 破折號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1528"/>
<location filename="../../scribus/actionmanager.cpp" line="1534"/>
<source>En Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<source>Extended Image Properties</source>
<translation>圖片延伸屬性</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1433"/>
<location filename="../../scribus/actionmanager.cpp" line="1438"/>
<source>&amp;Eye Dropper</source>
<translation>取色器 (&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1545"/>
<location filename="../../scribus/actionmanager.cpp" line="1551"/>
<source>ff</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1548"/>
<location filename="../../scribus/actionmanager.cpp" line="1554"/>
<source>ffi</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1549"/>
<location filename="../../scribus/actionmanager.cpp" line="1555"/>
<source>ffl</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1546"/>
<location filename="../../scribus/actionmanager.cpp" line="1552"/>
<source>fi</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<source>Field P&amp;roperties</source>
<translation>文字域屬性 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<source>Figure Dash</source>
<translation>圖形破折號</translation>
</message>
4139,42 → 6368,42
<translation type="obsolete">符合視窗 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1383"/>
<location filename="../../scribus/actionmanager.cpp" line="1388"/>
<source>&amp;Fit to Height</source>
<translation>符合高度 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<location filename="../../scribus/actionmanager.cpp" line="1389"/>
<source>Fit to Width</source>
<translation>符合寬度</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1547"/>
<location filename="../../scribus/actionmanager.cpp" line="1553"/>
<source>fl</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<source>&amp;Flip Horizontally</source>
<translation>水平翻轉 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<location filename="../../scribus/actionmanager.cpp" line="1338"/>
<source>&amp;Flip Vertically</source>
<translation>垂直翻轉 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<location filename="../../scribus/actionmanager.cpp" line="1303"/>
<source>&amp;Forced</source>
<translation>強制 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1494"/>
<location filename="../../scribus/actionmanager.cpp" line="1500"/>
<source>Frame Break</source>
<translation>分框</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<location filename="../../scribus/actionmanager.cpp" line="1371"/>
<source>&amp;Frame...</source>
<translation>框體 (&amp;F)...</translation>
</message>
4184,77 → 6413,77
<translation type="obsolete">手繪線 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1550"/>
<location filename="../../scribus/actionmanager.cpp" line="1556"/>
<source>ft</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1349"/>
<location filename="../../scribus/actionmanager.cpp" line="1354"/>
<source>&amp;Full Resolution</source>
<translation>完全解析度 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1459"/>
<location filename="../../scribus/actionmanager.cpp" line="1464"/>
<source>&amp;Generate Table Of Contents</source>
<translation>產生目錄索引 (&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1251"/>
<location filename="../../scribus/actionmanager.cpp" line="1256"/>
<source>Get Image...</source>
<translation> 匯入影像...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1249"/>
<location filename="../../scribus/actionmanager.cpp" line="1254"/>
<source>Get Text...</source>
<translation>匯入文字...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1252"/>
<location filename="../../scribus/actionmanager.cpp" line="1257"/>
<source>Get Vector File...</source>
<translation>取得向量檔案...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<location filename="../../scribus/actionmanager.cpp" line="1480"/>
<source>Getting Started with Scribus</source>
<translation>開始使用 Scribus</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<source>&amp;Glyph...</source>
<translation>符號 (&amp;G)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1327"/>
<location filename="../../scribus/actionmanager.cpp" line="1332"/>
<source>&amp;Group</source>
<translation>群組 (&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1533"/>
<location filename="../../scribus/actionmanager.cpp" line="1539"/>
<source>Hair Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<location filename="../../scribus/actionmanager.cpp" line="1462"/>
<source>&amp;Hyphenate Text</source>
<translation>用連字元連字 (&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1320"/>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<source>&amp;Image Effects</source>
<translation>圖像效果 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1360"/>
<location filename="../../scribus/actionmanager.cpp" line="1365"/>
<source>&amp;Image Frame</source>
<translation>圖片框 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<source>I&amp;mage Visible</source>
<translation>顯示圖像 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<location filename="../../scribus/actionmanager.cpp" line="1378"/>
<source>Im&amp;port...</source>
<translation>匯入 (&amp;P)...</translation>
</message>
4264,12 → 6493,12
<translation type="obsolete">插入貝茲曲線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<source>Insert &amp;Bezier Curve</source>
<translation>插入貝茲曲線 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
<source>Insert &amp;Freehand Line</source>
<translation>插入手繪線 (&amp;F)</translation>
</message>
4284,12 → 6513,12
<translation type="obsolete">插入圖片框</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<source>Insert &amp;Image Frame</source>
<translation>插入圖片框 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1442"/>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<source>Insert &amp;Line</source>
<translation>插入線 (&amp;L)</translation>
</message>
4299,7 → 6528,7
<translation type="obsolete">插入線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<location filename="../../scribus/actionmanager.cpp" line="1457"/>
<source>Insert Link Annotation</source>
<translation>插入連結註釋</translation>
</message>
4319,27 → 6548,27
<translation type="obsolete">插入頁碼</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1448"/>
<location filename="../../scribus/actionmanager.cpp" line="1453"/>
<source>Insert PDF Check Box</source>
<translation>插入 PDF 核取方塊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1449"/>
<location filename="../../scribus/actionmanager.cpp" line="1454"/>
<source>Insert PDF Combo Box</source>
<translation>插入 PDF 選擇方塊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1450"/>
<location filename="../../scribus/actionmanager.cpp" line="1455"/>
<source>Insert PDF List Box</source>
<translation>插入 PDF 清單方塊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<location filename="../../scribus/actionmanager.cpp" line="1451"/>
<source>Insert PDF Push Button</source>
<translation>插入 PDF 按鈕</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1447"/>
<location filename="../../scribus/actionmanager.cpp" line="1452"/>
<source>Insert PDF Text Field</source>
<translation>插入 PDF 文字框</translation>
</message>
4349,12 → 6578,12
<translation type="obsolete">插入多邊形</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<location filename="../../scribus/actionmanager.cpp" line="1446"/>
<source>Insert &amp;Polygon</source>
<translation>插入多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1438"/>
<location filename="../../scribus/actionmanager.cpp" line="1443"/>
<source>Insert &amp;Render Frame</source>
<translation type="unfinished"></translation>
</message>
4364,7 → 6593,7
<translation type="obsolete">插入形狀</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1440"/>
<location filename="../../scribus/actionmanager.cpp" line="1445"/>
<source>Insert &amp;Shape</source>
<translation>插入形狀 (&amp;S)</translation>
</message>
4379,17 → 6608,17
<translation type="obsolete">插入表格</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1439"/>
<location filename="../../scribus/actionmanager.cpp" line="1444"/>
<source>Insert T&amp;able</source>
<translation>插入表格 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1451"/>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<source>Insert Text Annotation</source>
<translation>插入文字註釋</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<location filename="../../scribus/actionmanager.cpp" line="1441"/>
<source>Insert &amp;Text Frame</source>
<translation>插入文字框 (&amp;T)</translation>
</message>
4399,47 → 6628,47
<translation type="obsolete">插入文字框</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1480"/>
<location filename="../../scribus/actionmanager.cpp" line="1486"/>
<source>Insert Unicode Character Begin Sequence</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1372"/>
<location filename="../../scribus/actionmanager.cpp" line="1377"/>
<source>&amp;Insert...</source>
<translation>插入 (&amp;I)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1329"/>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<source>Is &amp;Locked</source>
<translation>鎖定 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1351"/>
<location filename="../../scribus/actionmanager.cpp" line="1356"/>
<source>Is PDF A&amp;nnotation</source>
<translation>爲 PDF 注釋 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<location filename="../../scribus/actionmanager.cpp" line="1355"/>
<source>Is PDF &amp;Bookmark</source>
<translation>爲 PDF 書籤 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<source>&amp;Item Action Mode</source>
<translation>物件動作模式 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1284"/>
<location filename="../../scribus/actionmanager.cpp" line="1289"/>
<source>&amp;JavaScripts...</source>
<translation>&amp;JavaScripts...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1413"/>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<source>&amp;Layers</source>
<translation>圖層 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1294"/>
<location filename="../../scribus/actionmanager.cpp" line="1299"/>
<source>&amp;Left</source>
<translation>左 (&amp;L)</translation>
</message>
4454,12 → 6683,12
<translation type="obsolete">線條樣式 (&amp;L)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<location filename="../../scribus/actionmanager.cpp" line="1436"/>
<source>Link Text Frames</source>
<translation>串聯文字框</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1522"/>
<location filename="../../scribus/actionmanager.cpp" line="1528"/>
<source>Low Double Comma</source>
<comment>Unicode 0x201E</comment>
<translation>下雙逗號</translation>
4470,12 → 6699,12
<translation type="obsolete">下雙逗號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1347"/>
<location filename="../../scribus/actionmanager.cpp" line="1352"/>
<source>&amp;Low Resolution</source>
<translation>低解析度 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<location filename="../../scribus/actionmanager.cpp" line="1527"/>
<source>Low Single Comma</source>
<comment>Unicode 0x201A</comment>
<translation>下單逗號</translation>
4486,27 → 6715,27
<translation type="obsolete">下單逗號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<source>&amp;Lower</source>
<translation>降低 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1334"/>
<location filename="../../scribus/actionmanager.cpp" line="1339"/>
<source>Lower to &amp;Bottom</source>
<translation>降低到底部 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1379"/>
<location filename="../../scribus/actionmanager.cpp" line="1384"/>
<source>Manage &amp;Guides...</source>
<translation>管理參考線 (&amp;G)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1456"/>
<location filename="../../scribus/actionmanager.cpp" line="1461"/>
<source>&amp;Manage Images</source>
<translation>管理圖片 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1380"/>
<location filename="../../scribus/actionmanager.cpp" line="1385"/>
<source>Manage Page Properties...</source>
<translation>管理頁面屬性...</translation>
</message>
4516,87 → 6745,87
<translation type="obsolete">管理圖片 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1283"/>
<location filename="../../scribus/actionmanager.cpp" line="1288"/>
<source>&amp;Master Pages...</source>
<translation>主頁 (&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<source>&amp;Measurements</source>
<translation>測量 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1532"/>
<location filename="../../scribus/actionmanager.cpp" line="1538"/>
<source>Mid Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1503"/>
<location filename="../../scribus/actionmanager.cpp" line="1509"/>
<source>Middle Dot</source>
<translation>中間點</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1341"/>
<location filename="../../scribus/actionmanager.cpp" line="1346"/>
<source>More Info...</source>
<translation>更多資訊...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1376"/>
<location filename="../../scribus/actionmanager.cpp" line="1381"/>
<source>&amp;Move...</source>
<translation>移動 (&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1325"/>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<source>&amp;Multiple Duplicate</source>
<translation>多重複製 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1242"/>
<location filename="../../scribus/actionmanager.cpp" line="1247"/>
<source>&amp;New</source>
<translation>新建 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1493"/>
<location filename="../../scribus/actionmanager.cpp" line="1499"/>
<source>New Line</source>
<translation>新建線條</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1489"/>
<location filename="../../scribus/actionmanager.cpp" line="1495"/>
<source>Non Breaking Dash</source>
<translation>不間斷破折號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1490"/>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<source>Non Breaking &amp;Space</source>
<translation>不間斷空格 (&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1309"/>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<source>&amp;Normal</source>
<translation>普通 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<location filename="../../scribus/actionmanager.cpp" line="1353"/>
<source>&amp;Normal Resolution</source>
<translation>正常解析度 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1492"/>
<location filename="../../scribus/actionmanager.cpp" line="1498"/>
<source>Number of Pages</source>
<translation>頁面數</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1243"/>
<location filename="../../scribus/actionmanager.cpp" line="1248"/>
<source>&amp;Open...</source>
<translation>打開 (&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1293"/>
<location filename="../../scribus/actionmanager.cpp" line="1298"/>
<source>&amp;Other...</source>
<translation>其他 (&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<location filename="../../scribus/actionmanager.cpp" line="1416"/>
<source>&amp;Outline</source>
<comment>Document Outline Palette</comment>
<translation>輪廓 (&amp;O)</translation>
4607,7 → 6836,7
<translation type="obsolete">輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1317"/>
<location filename="../../scribus/actionmanager.cpp" line="1322"/>
<source>&amp;Outline</source>
<comment>type effect</comment>
<translation>輪廓 (&amp;O)</translation>
4618,13 → 6847,13
<translation type="obsolete">輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1361"/>
<location filename="../../scribus/actionmanager.cpp" line="1366"/>
<source>&amp;Outlines</source>
<comment>Convert to oulines</comment>
<translation>輪廓 (&amp;O)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1491"/>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<source>Page &amp;Number</source>
<translation>頁碼 (&amp;N)</translation>
</message>
4634,112 → 6863,112
<translation type="obsolete">段落樣式 (&amp;P)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1270"/>
<location filename="../../scribus/actionmanager.cpp" line="1275"/>
<source>&amp;Paste</source>
<translation type="unfinished">貼上 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1271"/>
<location filename="../../scribus/actionmanager.cpp" line="1276"/>
<source>Paste (&amp;Absolute)</source>
<translation>絕對貼上 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<location filename="../../scribus/actionmanager.cpp" line="1286"/>
<source>Patterns...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1421"/>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<source>P&amp;DF Tools</source>
<translation>P&amp;DF 工具</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1362"/>
<location filename="../../scribus/actionmanager.cpp" line="1367"/>
<source>&amp;Polygon</source>
<translation>多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1258"/>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<source>P&amp;references...</source>
<translation type="unfinished">偏好設定 (&amp;R)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1418"/>
<location filename="../../scribus/actionmanager.cpp" line="1423"/>
<source>Preflight &amp;Verifier</source>
<translation>印前檢驗器 (&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1390"/>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
<source>Preview Mode</source>
<translation>預覽模式</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<location filename="../../scribus/actionmanager.cpp" line="1265"/>
<source>Print Previe&amp;w</source>
<translation>預覽列印 (&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<source>&amp;Print...</source>
<translation type="unfinished">列印 (&amp;P)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1331"/>
<location filename="../../scribus/actionmanager.cpp" line="1336"/>
<source>&amp;Printing Enabled</source>
<translation>允許列印 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<location filename="../../scribus/actionmanager.cpp" line="1415"/>
<source>&amp;Properties</source>
<translation>屬性 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<location filename="../../scribus/actionmanager.cpp" line="1266"/>
<source>&amp;Quit</source>
<translation>退出 (&amp;Q)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<location filename="../../scribus/actionmanager.cpp" line="1513"/>
<source>Quotation Dash</source>
<translation>引用破折號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1337"/>
<location filename="../../scribus/actionmanager.cpp" line="1342"/>
<source>&amp;Raise</source>
<translation>升高 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1335"/>
<location filename="../../scribus/actionmanager.cpp" line="1340"/>
<source>Raise to &amp;Top</source>
<translation>升高到頂部 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1264"/>
<location filename="../../scribus/actionmanager.cpp" line="1269"/>
<source>&amp;Redo</source>
<translation>重做 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1499"/>
<location filename="../../scribus/actionmanager.cpp" line="1505"/>
<source>Registered Trademark</source>
<translation>注冊商標</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1280"/>
<location filename="../../scribus/actionmanager.cpp" line="1285"/>
<source>Replace Colors...</source>
<translation>取代顏色...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1247"/>
<location filename="../../scribus/actionmanager.cpp" line="1252"/>
<source>Re&amp;vert to Saved</source>
<translation>恢復到已儲存 (&amp;V)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1296"/>
<location filename="../../scribus/actionmanager.cpp" line="1301"/>
<source>&amp;Right</source>
<translation>右 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1425"/>
<location filename="../../scribus/actionmanager.cpp" line="1430"/>
<source>Rotate Item</source>
<translation>旋轉物件</translation>
</message>
4749,32 → 6978,32
<translation type="obsolete">尺規相對應於頁面</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<location filename="../../scribus/actionmanager.cpp" line="1408"/>
<source>Rulers Relative to Page</source>
<translation>尺規相對應於頁面</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<location filename="../../scribus/actionmanager.cpp" line="1373"/>
<source>Sample Text</source>
<translation>範例文字</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1245"/>
<location filename="../../scribus/actionmanager.cpp" line="1250"/>
<source>&amp;Save</source>
<translation type="unfinished">儲存 (&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1255"/>
<location filename="../../scribus/actionmanager.cpp" line="1260"/>
<source>Save as &amp;EPS...</source>
<translation>儲存爲 EPS (&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1256"/>
<location filename="../../scribus/actionmanager.cpp" line="1261"/>
<source>Save as P&amp;DF...</source>
<translation type="unfinished">儲存爲 PDF (&amp;D)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1246"/>
<location filename="../../scribus/actionmanager.cpp" line="1251"/>
<source>Save &amp;As...</source>
<translation>另存新檔 (&amp;A)...</translation>
</message>
4784,62 → 7013,62
<translation type="obsolete">儲存頁面爲 EPS (&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1254"/>
<location filename="../../scribus/actionmanager.cpp" line="1259"/>
<source>Save &amp;Text...</source>
<translation>儲存文字 (&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1412"/>
<location filename="../../scribus/actionmanager.cpp" line="1417"/>
<source>&amp;Scrapbook</source>
<translation>剪貼簿 (&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1471"/>
<location filename="../../scribus/actionmanager.cpp" line="1477"/>
<source>Scribus Homepage</source>
<translation>Scribus 首頁</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1470"/>
<location filename="../../scribus/actionmanager.cpp" line="1476"/>
<source>Scribus &amp;Manual...</source>
<translation>Scribus 使用手冊 (&amp;M)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1472"/>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<source>Scribus Online Documentation</source>
<translation>Scribus 線上文件</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1473"/>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<source>Scribus Wiki</source>
<translation>Scribus Wiki</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1276"/>
<location filename="../../scribus/actionmanager.cpp" line="1281"/>
<source>&amp;Search/Replace...</source>
<translation type="unfinished">尋找 / 取代 (&amp;S)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1273"/>
<location filename="../../scribus/actionmanager.cpp" line="1278"/>
<source>Select &amp;All</source>
<translation type="unfinished">全選 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1424"/>
<location filename="../../scribus/actionmanager.cpp" line="1429"/>
<source>Select Item</source>
<translation>選擇物件</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1339"/>
<location filename="../../scribus/actionmanager.cpp" line="1344"/>
<source>Send to Patterns</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1338"/>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<source>Send to S&amp;crapbook</source>
<translation>傳送到寄存本 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1318"/>
<location filename="../../scribus/actionmanager.cpp" line="1323"/>
<source>S&amp;hadow</source>
<translation>陰影 (&amp;H)</translation>
</message>
4849,72 → 7078,72
<translation type="obsolete">形狀 (&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<source>Show &amp;Baseline Grid</source>
<translation>顯示底線網格 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1392"/>
<location filename="../../scribus/actionmanager.cpp" line="1397"/>
<source>Show Bleeds</source>
<translation>顯示出血</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<location filename="../../scribus/actionmanager.cpp" line="1411"/>
<source>Show Context Menu</source>
<translation>顯示內容目錄</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<location filename="../../scribus/actionmanager.cpp" line="1406"/>
<source>Show Control Characters</source>
<translation>顯示控制字元</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1393"/>
<location filename="../../scribus/actionmanager.cpp" line="1398"/>
<source>Show &amp;Frames</source>
<translation>顯示框體 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1396"/>
<location filename="../../scribus/actionmanager.cpp" line="1401"/>
<source>Show &amp;Grid</source>
<translation>顯示網格 (&amp;G)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1397"/>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<source>Show G&amp;uides</source>
<translation>顯示參考線 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1395"/>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<source>Show &amp;Images</source>
<translation>顯示圖片 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1394"/>
<location filename="../../scribus/actionmanager.cpp" line="1399"/>
<source>Show Layer Indicators</source>
<translation>顯示圖層指示</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1391"/>
<location filename="../../scribus/actionmanager.cpp" line="1396"/>
<source>Show &amp;Margins</source>
<translation>顯示頁面邊距 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1402"/>
<location filename="../../scribus/actionmanager.cpp" line="1407"/>
<source>Show Rulers</source>
<translation>顯示尺規</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1400"/>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<source>Show &amp;Text Chain</source>
<translation>顯示文字鏈 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1398"/>
<location filename="../../scribus/actionmanager.cpp" line="1403"/>
<source>Show Text Frame Columns</source>
<translation>顯示文字框的欄</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1511"/>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<source>Single Left</source>
<comment>Unicode 0x2018</comment>
<translation>單面左邊</translation>
4925,7 → 7154,7
<translation type="obsolete">單面左邊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1517"/>
<location filename="../../scribus/actionmanager.cpp" line="1523"/>
<source>Single Left Guillemet</source>
<comment>Unicode 0x2039</comment>
<translation>左單引號</translation>
4941,13 → 7170,13
<translation type="obsolete">單面反轉</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1515"/>
<location filename="../../scribus/actionmanager.cpp" line="1521"/>
<source>Single Reversed</source>
<comment>Unicode 0x201B</comment>
<translation>單面反轉</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1512"/>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<source>Single Right</source>
<comment>Unicode 0x2019</comment>
<translation>單面右邊</translation>
4958,7 → 7187,7
<translation type="obsolete">單面右邊</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1518"/>
<location filename="../../scribus/actionmanager.cpp" line="1524"/>
<source>Single Right Guillemet</source>
<comment>Unicode 0x203A</comment>
<translation>右單引號</translation>
4969,52 → 7198,52
<translation type="obsolete">右單引號</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1330"/>
<location filename="../../scribus/actionmanager.cpp" line="1335"/>
<source>Si&amp;ze is Locked</source>
<translation>鎖定尺寸 (&amp;Z)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1314"/>
<location filename="../../scribus/actionmanager.cpp" line="1319"/>
<source>Small &amp;Caps</source>
<translation>小寫 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1488"/>
<location filename="../../scribus/actionmanager.cpp" line="1494"/>
<source>Smart &amp;Hyphen</source>
<translation>智慧連字元 (&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1404"/>
<location filename="../../scribus/actionmanager.cpp" line="1409"/>
<source>Sn&amp;ap to Grid</source>
<translation>吸附到網格 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1405"/>
<location filename="../../scribus/actionmanager.cpp" line="1410"/>
<source>Sna&amp;p to Guides</source>
<translation>吸附到參考線 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1501"/>
<location filename="../../scribus/actionmanager.cpp" line="1507"/>
<source>Solidus</source>
<translation>斜線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1358"/>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<source>Split &amp;Polygons</source>
<translation>分離多邊形 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1551"/>
<location filename="../../scribus/actionmanager.cpp" line="1557"/>
<source>st</source>
<translation></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1369"/>
<location filename="../../scribus/actionmanager.cpp" line="1374"/>
<source>Sticky Tools</source>
<translation>黏性工具</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1510"/>
<location filename="../../scribus/actionmanager.cpp" line="1516"/>
<source>Straight Double</source>
<comment>Unicode 0x0022</comment>
<translation>雙倍直線</translation>
5025,22 → 7254,22
<translation type="obsolete">雙倍直線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1312"/>
<location filename="../../scribus/actionmanager.cpp" line="1317"/>
<source>&amp;Strike Through</source>
<translation>刪除線 (&amp;S)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1282"/>
<location filename="../../scribus/actionmanager.cpp" line="1287"/>
<source>S&amp;tyles...</source>
<translation>樣式 (&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1316"/>
<location filename="../../scribus/actionmanager.cpp" line="1321"/>
<source>Su&amp;bscript</source>
<translation>下標 (&amp;B)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1315"/>
<location filename="../../scribus/actionmanager.cpp" line="1320"/>
<source>Su&amp;perscript</source>
<translation>上標 (&amp;P)</translation>
</message>
5050,22 → 7279,22
<translation type="obsolete">表格 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1321"/>
<location filename="../../scribus/actionmanager.cpp" line="1326"/>
<source>&amp;Tabulators...</source>
<translation>跳位字元 (&amp;T)...</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1363"/>
<location filename="../../scribus/actionmanager.cpp" line="1368"/>
<source>&amp;Text Frame</source>
<translation>文字框 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1531"/>
<location filename="../../scribus/actionmanager.cpp" line="1537"/>
<source>Thick Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1530"/>
<location filename="../../scribus/actionmanager.cpp" line="1536"/>
<source>Thin Space</source>
<translation type="unfinished"></translation>
</message>
5075,95 → 7304,100
<translation type="obsolete">縮圖 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1463"/>
<location filename="../../scribus/actionmanager.cpp" line="1468"/>
<source>&amp;Tile</source>
<translation>平鋪 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1479"/>
<location filename="../../scribus/actionmanager.cpp" line="1485"/>
<source>Toggle Guides</source>
<translation>切換參考線</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1478"/>
<location filename="../../scribus/actionmanager.cpp" line="1484"/>
<source>Toggle Palettes</source>
<translation>切換色板</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1420"/>
<location filename="../../scribus/actionmanager.cpp" line="1425"/>
<source>&amp;Tools</source>
<translation>工具 (&amp;T)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1469"/>
<location filename="../../scribus/actionmanager.cpp" line="1474"/>
<source>Toolti&amp;ps</source>
<translation>提示 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1500"/>
<location filename="../../scribus/actionmanager.cpp" line="1506"/>
<source>Trademark</source>
<translation>商標</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1310"/>
<location filename="../../scribus/actionmanager.cpp" line="1315"/>
<source>&amp;Underline</source>
<translation>底線 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1311"/>
<location filename="../../scribus/actionmanager.cpp" line="1316"/>
<source>Underline &amp;Words</source>
<translation>增加底線 (&amp;W)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1263"/>
<location filename="../../scribus/actionmanager.cpp" line="1268"/>
<source>&amp;Undo</source>
<translation>復原 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1328"/>
<location filename="../../scribus/actionmanager.cpp" line="1333"/>
<source>&amp;Ungroup</source>
<translation>取消群組 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<location filename="../../scribus/actionmanager.cpp" line="1437"/>
<source>Unlink Text Frames</source>
<translation>解除串聯文字框</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1343"/>
<location filename="../../scribus/actionmanager.cpp" line="1348"/>
<source>&amp;Update Image</source>
<translation>刷新圖片 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1497"/>
<location filename="../../scribus/actionmanager.cpp" line="1503"/>
<source>Zero Width NB Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1496"/>
<location filename="../../scribus/actionmanager.cpp" line="1502"/>
<source>&amp;Zero Width Space</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1427"/>
<location filename="../../scribus/actionmanager.cpp" line="1432"/>
<source>Zoom in</source>
<translation>放大</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1426"/>
<location filename="../../scribus/actionmanager.cpp" line="1431"/>
<source>Zoom in or out</source>
<translation>放大或縮小</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1428"/>
<location filename="../../scribus/actionmanager.cpp" line="1433"/>
<source>Zoom out</source>
<translation>縮小</translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1345"/>
<location filename="../../scribus/actionmanager.cpp" line="1350"/>
<source>Adjust Image to Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/actionmanager.cpp" line="1475"/>
<source>Move/Resize value indicator</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AdjustCmsDialog</name>
6399,25 → 8633,30
<context>
<name>AspellPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
<source>0.1</source>
<translation type="unfinished">0.1</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="68"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
<source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
<translation type="unfinished">透過 aspell 增加拼字檢查支援。可選擇的語言基於所安裝的字典。拼字檢查可以即時, 或是在選擇文字時完成。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="31"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
<source>Spell Checker</source>
<translation type="unfinished">拼字檢查器</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="63"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
<source>Spell-checking support</source>
<translation type="unfinished">拼字檢查支援</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
<source>Aspell Plugin Error</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AspellPluginBase</name>
6552,42 → 8791,42
<context>
<name>AspellPluginImpl</name>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
<source> aspell dictionary.</source>
<translation> aspell 字典。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="317"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="338"/>
<source> by adding it to the session list.</source>
<translation> 增加它到會話清單。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="58"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="79"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
<translation>aspell插件 (AspellPluginImpl::AspellPluginImpl): aspell 拼字器設定錯誤。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="65"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="86"/>
<source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
<translation>aspell插件 (AspellPluginImpl::AspellPluginImpl): 產生 aspell 拼字器錯誤。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="339"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
<source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
<translation>AspellPluginImpl::on_faddWordBtn_clicked(): 無法增加單字到個人的清單。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="316"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="337"/>
<source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
<source>default </source>
<translation>預設 </translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
<source>Loaded </source>
<translation>已載入 </translation>
</message>
6607,15 → 8846,25
<translation type="obsolete">拼字檢查已完成。</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="197"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="218"/>
<source>Spelling check complete</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="198"/>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="405"/>
<source>Spell Checker</source>
<translation type="unfinished">拼字檢查器</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="57"/>
<source>No available Aspell dictionaries found. Install some, please.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="407"/>
<source>Do you want start from the beginning of the selection with new language selected?</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>AutoformButtonGroup</name>
6660,8 → 8909,13
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure Postscript Barcode Writer</source>
<translation type="unfinished">Scribus 的純 Postscript 條碼輸出前端</translation>
<translation type="obsolete">Scribus 的純 Postscript 條碼輸出前端</translation>
</message>
<message>
<location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
<source>Scribus frontend for Pure PostScript Barcode Writer</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>BarcodeGenerator</name>
7619,27 → 9873,27
<context>
<name>CMYKChoose</name>
<message>
<location filename="../../scribus/cmykfw.cpp" line="708"/>
<location filename="../../scribus/cmykfw.cpp" line="704"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="755"/>
<location filename="../../scribus/cmykfw.cpp" line="751"/>
<source>B:</source>
<translation>B:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="709"/>
<location filename="../../scribus/cmykfw.cpp" line="705"/>
<source>C:</source>
<translation>C:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="388"/>
<location filename="../../scribus/cmykfw.cpp" line="390"/>
<source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="910"/>
<location filename="../../scribus/cmykfw.cpp" line="906"/>
<source>CMYK</source>
<translation>CMYK</translation>
</message>
7649,7 → 9903,7
<translation>顔色類型 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="442"/>
<location filename="../../scribus/cmykfw.cpp" line="444"/>
<source>Dynamic Color Bars</source>
<translation>動態顔色條</translation>
</message>
7659,7 → 9913,7
<translation>編輯顔色</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="754"/>
<location filename="../../scribus/cmykfw.cpp" line="750"/>
<source>G:</source>
<translation>G:</translation>
</message>
7669,7 → 9923,7
<translation type="obsolete">HSV-顔色表</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="789"/>
<location filename="../../scribus/cmykfw.cpp" line="785"/>
<source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
<translation type="unfinished"></translation>
</message>
7684,12 → 9938,12
<translation>是專色</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="345"/>
<location filename="../../scribus/cmykfw.cpp" line="347"/>
<source>K:</source>
<translation>K:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="710"/>
<location filename="../../scribus/cmykfw.cpp" line="706"/>
<source>M:</source>
<translation>M:</translation>
</message>
7719,38 → 9973,38
<translation>舊</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="753"/>
<location filename="../../scribus/cmykfw.cpp" line="749"/>
<source>R:</source>
<translation>R:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="915"/>
<location filename="../../scribus/cmykfw.cpp" line="911"/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="440"/>
<location filename="../../scribus/cmykfw.cpp" line="442"/>
<source>Static Color Bars</source>
<translation>靜態顔色條</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1015"/>
<location filename="../../scribus/cmykfw.cpp" line="1011"/>
<source>The name of the color already exists,
please choose another one.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="768"/>
<location filename="../../scribus/cmykfw.cpp" line="764"/>
<source>Web Safe RGB</source>
<translation>網頁安全 RGB</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="711"/>
<location filename="../../scribus/cmykfw.cpp" line="707"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="1006"/>
<location filename="../../scribus/cmykfw.cpp" line="1002"/>
<source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
<translation>你不能生成一個叫 &quot;%1&quot;的顔色。
7757,7 → 10011,7
這個是給透明色預留的名字</translation>
</message>
<message>
<location filename="../../scribus/cmykfw.cpp" line="999"/>
<location filename="../../scribus/cmykfw.cpp" line="995"/>
<source>You cannot create a color without a name
Please give it a name</source>
<translation type="unfinished"></translation>
8002,6 → 10256,50
</message>
</context>
<context>
<name>Canvas</name>
<message>
<location filename="../../scribus/canvas.cpp" line="2251"/>
<source>X: %1
Y: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2242"/>
<source>X: %1</source>
<translation type="unfinished">X: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2244"/>
<source>Y: %1</source>
<translation type="unfinished">Y: %1</translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2259"/>
<source>Length: %1
Angle: %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/canvas.cpp" line="2261"/>
<source>Width: %1
Height: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CanvasMode_Normal</name>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1822"/>
<source>All Supported Formats</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/canvasmode_normal.cpp" line="1852"/>
<source>Open</source>
<translation type="unfinished">打開</translation>
</message>
</context>
<context>
<name>ChTable</name>
<message>
<location filename="" line="7471221"/>
8014,40 → 10312,40
<message>
<location filename="../../scribus/charselect.cpp" line="393"/>
<source>Arabic</source>
<translation>阿拉伯字元</translation>
<translation type="obsolete">阿拉伯字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="399"/>
<source>Arabic Extended A</source>
<translation>阿拉伯字元擴展 A</translation>
<translation type="obsolete">阿拉伯字元擴展 A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="405"/>
<source>Arabic Extended B</source>
<translation>阿拉伯字元擴展 B</translation>
<translation type="obsolete">阿拉伯字元擴展 B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="309"/>
<source>Arrows</source>
<translation>箭頭</translation>
<translation type="obsolete">箭頭</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="255"/>
<source>Basic Latin</source>
<translation>基本拉丁</translation>
<translation type="obsolete">基本拉丁</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="327"/>
<source>Block Elements</source>
<translation>區塊元素</translation>
<translation type="obsolete">區塊元素</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="321"/>
<source>Box Drawing</source>
<translation>方盒繪圖</translation>
<translation type="obsolete">方盒繪圖</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="649"/>
<location filename="../../scribus/charselect.cpp" line="298"/>
<source>Cannot write file %1</source>
<translation>無法寫入檔案 %1</translation>
</message>
8054,7 → 10352,7
<message>
<location filename="../../scribus/charselect.ui" line="123"/>
<source>Character Class:</source>
<translation>字元類:</translation>
<translation type="obsolete">字元類:</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="13"/>
8062,7 → 10360,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="584"/>
<location filename="../../scribus/charselect.cpp" line="226"/>
<source>Choose a filename to open</source>
<translation>選擇要開啟的檔案名</translation>
</message>
8074,7 → 10372,7
<message>
<location filename="../../scribus/charselect.ui" line="213"/>
<source>C&amp;lear</source>
<translation>清除 (&amp;L)</translation>
<translation type="obsolete">清除 (&amp;L)</translation>
</message>
<message>
<location filename="" line="7471221"/>
8094,45 → 10392,40
<message>
<location filename="../../scribus/charselect.cpp" line="291"/>
<source>Currency Symbols</source>
<translation>貨幣符號</translation>
<translation type="obsolete">貨幣符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="381"/>
<source>Cyrillic</source>
<translation>斯拉夫字元</translation>
<translation type="obsolete">斯拉夫字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="387"/>
<source>Cyrillic Supplement</source>
<translation>斯拉夫字元附錄</translation>
<translation type="obsolete">斯拉夫字元附錄</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="210"/>
<source>Delete the current selection(s).</source>
<translation>刪除目前選擇的。</translation>
<translation type="obsolete">刪除目前選擇的。</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="345"/>
<source>Dingbats</source>
<translation>裝飾符</translation>
<translation type="obsolete">裝飾符</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="657"/>
<location filename="../../scribus/charselect.cpp" line="306"/>
<source>Empty the Palette?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="88"/>
<source>Enhanced Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="648"/>
<location filename="../../scribus/charselect.cpp" line="297"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="611"/>
<location filename="../../scribus/charselect.cpp" line="256"/>
<source>Error reading file %1 - file is corrupted propably.</source>
<translation>載入檔案 %1 時發生錯誤, 檔案可能已損毀。</translation>
</message>
8139,40 → 10432,40
<message>
<location filename="../../scribus/charselect.ui" line="100"/>
<source>Font:</source>
<translation>字體:</translation>
<translation type="obsolete">字體:</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="250"/>
<source>Full Character Set</source>
<translation>完全字元集</translation>
<translation type="obsolete">完全字元集</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="279"/>
<source>General Punctuation</source>
<translation>一般標點符號</translation>
<translation type="obsolete">一般標點符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="333"/>
<source>Geometric Shapes</source>
<translation>幾何圖形</translation>
<translation type="obsolete">幾何圖形</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="369"/>
<source>Greek</source>
<translation>希臘字元</translation>
<translation type="obsolete">希臘字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="375"/>
<source>Greek Extended</source>
<translation>擴展希臘字元</translation>
<translation type="obsolete">擴展希臘字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="411"/>
<source>Hebrew</source>
<translation>希伯來字元</translation>
<translation type="obsolete">希伯來字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="30"/>
<location filename="../../scribus/charselect.ui" line="24"/>
<source>Hide/Show Enhanced Palette</source>
<translation type="unfinished"></translation>
</message>
8179,60 → 10472,55
<message>
<location filename="../../scribus/charselect.ui" line="203"/>
<source>&amp;Insert</source>
<translation>插入 (&amp;I)</translation>
<translation type="obsolete">插入 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="200"/>
<source>Insert the characters at the cursor in the text</source>
<translation>在文字的游標處插入字元</translation>
<translation type="obsolete">在文字的游標處插入字元</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="267"/>
<source>Latin Extended-A</source>
<translation>拉丁擴展-A</translation>
<translation type="obsolete">拉丁擴展-A</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="273"/>
<source>Latin Extended-B</source>
<translation>拉丁擴展-B</translation>
<translation type="obsolete">拉丁擴展-B</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="261"/>
<source>Latin-1 Supplement</source>
<translation>拉丁-1 附錄</translation>
<translation type="obsolete">拉丁-1 附錄</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="297"/>
<source>Letterlike Symbols</source>
<translation>類似字母符號</translation>
<translation type="obsolete">類似字母符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="357"/>
<source>Ligatures</source>
<translation>連字</translation>
<translation type="obsolete">連字</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="315"/>
<source>Mathematical Operators</source>
<translation>數學運算符</translation>
<translation type="obsolete">數學運算符</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="339"/>
<source>Miscellaneous Symbols</source>
<translation>各種符號</translation>
<translation type="obsolete">各種符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="303"/>
<source>Number Forms</source>
<translation>數位形式</translation>
<translation type="obsolete">數位形式</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="19"/>
<source>Quick Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="38"/>
<location filename="../../scribus/charselect.cpp" line="31"/>
<source>Scribus Char Palette (*.ucp);;All Files (*)</source>
<translation>Scribus Char Palette (*.ucp);;All Files (*)</translation>
</message>
8244,17 → 10532,17
<message>
<location filename="../../scribus/charselect.cpp" line="351"/>
<source>Small Form Variants</source>
<translation>小形狀變體</translation>
<translation type="obsolete">小形狀變體</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="363"/>
<source>Specials</source>
<translation>特別符號</translation>
<translation type="obsolete">特別符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="285"/>
<source>Super- and Subscripts</source>
<translation>上標和下標</translation>
<translation type="obsolete">上標和下標</translation>
</message>
<message>
<location filename="../../scribus/charselect.ui" line="164"/>
8262,21 → 10550,214
<translation type="obsolete">如果你長按滑鼠右鍵, 你能看到一個縮圖。插入鍵插入一個符號到所選擇的下面, 刪除鍵刪除最後插入的符號</translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="658"/>
<location filename="../../scribus/charselect.cpp" line="307"/>
<source>You will remove all characters from this palette. Are you sure?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselect.cpp" line="625"/>
<location filename="../../scribus/charselect.cpp" line="272"/>
<source>Save Quick Character Palette</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CharSelectEnhanced</name>
<message>
<location filename="../../scribus/charselect.ui" line="152"/>
<location filename="../../scribus/charselectenhanced.cpp" line="205"/>
<source>Full Character Set</source>
<translation type="unfinished">完全字元集</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="210"/>
<source>Basic Latin</source>
<translation type="unfinished">基本拉丁</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="216"/>
<source>Latin-1 Supplement</source>
<translation type="unfinished">拉丁-1 附錄</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="222"/>
<source>Latin Extended-A</source>
<translation type="unfinished">拉丁擴展-A</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="228"/>
<source>Latin Extended-B</source>
<translation type="unfinished">拉丁擴展-B</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="234"/>
<source>General Punctuation</source>
<translation type="unfinished">一般標點符號</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="240"/>
<source>Super- and Subscripts</source>
<translation type="unfinished">上標和下標</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="246"/>
<source>Currency Symbols</source>
<translation type="unfinished">貨幣符號</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="252"/>
<source>Letterlike Symbols</source>
<translation type="unfinished">類似字母符號</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="258"/>
<source>Number Forms</source>
<translation type="unfinished">數位形式</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="264"/>
<source>Arrows</source>
<translation type="unfinished">箭頭</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="270"/>
<source>Mathematical Operators</source>
<translation type="unfinished">數學運算符</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="276"/>
<source>Box Drawing</source>
<translation type="unfinished">方盒繪圖</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="282"/>
<source>Block Elements</source>
<translation type="unfinished">區塊元素</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="288"/>
<source>Geometric Shapes</source>
<translation type="unfinished">幾何圖形</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="294"/>
<source>Miscellaneous Symbols</source>
<translation type="unfinished">各種符號</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="300"/>
<source>Dingbats</source>
<translation type="unfinished">裝飾符</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="306"/>
<source>Small Form Variants</source>
<translation type="unfinished">小形狀變體</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="312"/>
<source>Ligatures</source>
<translation type="unfinished">連字</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="318"/>
<source>Specials</source>
<translation type="unfinished">特別符號</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="324"/>
<source>Greek</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="330"/>
<source>Greek Extended</source>
<translation type="unfinished">擴展希臘字元</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="336"/>
<source>Cyrillic</source>
<translation type="unfinished">斯拉夫字元</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="342"/>
<source>Cyrillic Supplement</source>
<translation type="unfinished">斯拉夫字元附錄</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="348"/>
<source>Arabic</source>
<translation type="unfinished">阿拉伯字元</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="354"/>
<source>Arabic Extended A</source>
<translation type="unfinished">阿拉伯字元擴展 A</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="360"/>
<source>Arabic Extended B</source>
<translation type="unfinished">阿拉伯字元擴展 B</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.cpp" line="366"/>
<source>Hebrew</source>
<translation type="unfinished">希伯來字元</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="13"/>
<source>Enhanced Character Palette</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="19"/>
<source>&amp;Font:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="45"/>
<source>C&amp;haracter Class:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="77"/>
<source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="96"/>
<source>Insert &amp;Code:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="106"/>
<source>Type in a four digit unicode value directly here</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="131"/>
<source>Glyphs to Insert</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="171"/>
<source>Insert the characters at the cursor in the text</source>
<translation type="unfinished">在文字的游標處插入字元</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="174"/>
<source>&amp;Insert</source>
<translation type="unfinished">插入 (&amp;I)</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="181"/>
<source>Delete the current selection(s).</source>
<translation type="unfinished">刪除目前選擇的。</translation>
</message>
<message>
<location filename="../../scribus/charselectenhanced.ui" line="184"/>
<source>C&amp;lear</source>
<translation type="unfinished">清除 (&amp;L)</translation>
</message>
</context>
<context>
<name>CharStyleComboBox</name>
8500,7 → 10981,7
<context>
<name>ColorManager</name>
<message>
<location filename="../../scribus/colorm.cpp" line="320"/>
<location filename="../../scribus/colorm.cpp" line="311"/>
<source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
<translation>所有支援的格式 (%1);;檔案 (%2);;其他檔案 (%3);;全部檔案 (*)</translation>
</message>
8525,7 → 11006,7
<translation>顔色</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="362"/>
<location filename="../../scribus/colorm.cpp" line="353"/>
<source>Copy of %1</source>
<translation>複製 %1</translation>
</message>
8595,7 → 11076,7
<translation>從現有的檔案中匯入顔色組合到目前的組合</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="330"/>
<location filename="../../scribus/colorm.cpp" line="321"/>
<source>Information</source>
<translation>資訊</translation>
</message>
8620,7 → 11101,7
<translation>新建 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="373"/>
<location filename="../../scribus/colorm.cpp" line="364"/>
<source>New Color</source>
<translation>新顔色</translation>
</message>
8650,7 → 11131,7
<translation>儲存目前的顔色組合</translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="330"/>
<location filename="../../scribus/colorm.cpp" line="321"/>
<source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import.
Not all files have DSC conformant comments where the color descriptions are located.
8659,7 → 11140,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/colorm.cpp" line="321"/>
<location filename="../../scribus/colorm.cpp" line="312"/>
<source>Import Colors</source>
<translation type="unfinished"></translation>
</message>
9523,20 → 12004,25
<context>
<name>ContextMenu</name>
<message>
<location filename="../../scribus/contextmenu.cpp" line="446"/>
<location filename="../../scribus/contextmenu.cpp" line="454"/>
<source>Delete Page</source>
<translation>刪除頁面</translation>
</message>
<message>
<location filename="../../scribus/contextmenu.cpp" line="413"/>
<location filename="../../scribus/contextmenu.cpp" line="421"/>
<source>Paste File...</source>
<translation>貼上檔案...</translation>
</message>
<message>
<location filename="../../scribus/contextmenu.cpp" line="202"/>
<location filename="../../scribus/contextmenu.cpp" line="210"/>
<source>Preview Settings</source>
<translation>預覽設定</translation>
</message>
<message>
<location filename="../../scribus/contextmenu.cpp" line="182"/>
<source>Paste Image from Clipboard</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>CopyPageToMasterPageBase</name>
9567,132 → 12053,132
<context>
<name>Cpalette</name>
<message>
<location filename="../../scribus/cpalette.cpp" line="983"/>
<location filename="../../scribus/cpalette.cpp" line="985"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="982"/>
<location filename="../../scribus/cpalette.cpp" line="984"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="997"/>
<location filename="../../scribus/cpalette.cpp" line="999"/>
<source>Angle</source>
<translation>角度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1016"/>
<location filename="../../scribus/cpalette.cpp" line="1018"/>
<source>Blend Mode:</source>
<translation>混合模式:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1032"/>
<location filename="../../scribus/cpalette.cpp" line="1034"/>
<source>Color</source>
<translation>顔色</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1029"/>
<location filename="../../scribus/cpalette.cpp" line="1031"/>
<source>Color Burn</source>
<translation type="unfinished">顔色焦灼</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1028"/>
<location filename="../../scribus/cpalette.cpp" line="1030"/>
<source>Color Dodge</source>
<translation type="unfinished">顔色模糊</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1009"/>
<location filename="../../scribus/cpalette.cpp" line="1011"/>
<source>Cross Diagonal Gradient</source>
<translation type="unfinished">Cross Diagonal Gradient</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1019"/>
<location filename="../../scribus/cpalette.cpp" line="1021"/>
<source>Darken</source>
<translation>更暗</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1008"/>
<location filename="../../scribus/cpalette.cpp" line="1010"/>
<source>Diagonal Gradient</source>
<translation>對角線梯度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1026"/>
<location filename="../../scribus/cpalette.cpp" line="1028"/>
<source>Difference</source>
<translation type="unfinished">差分</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1042"/>
<location filename="../../scribus/cpalette.cpp" line="1044"/>
<source>Display all colors from the document color list, or only the already used colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1034"/>
<location filename="../../scribus/cpalette.cpp" line="1036"/>
<source>Display only used Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1037"/>
<location filename="../../scribus/cpalette.cpp" line="1039"/>
<source>Edit Fill Color Properties</source>
<translation>Edit Fill Colour Properties</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1036"/>
<location filename="../../scribus/cpalette.cpp" line="1038"/>
<source>Edit Line Color Properties</source>
<translation>Edit Line Colour Properties</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1027"/>
<location filename="../../scribus/cpalette.cpp" line="1029"/>
<source>Exclusion</source>
<translation>排除</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1011"/>
<location filename="../../scribus/cpalette.cpp" line="1013"/>
<source>Free linear Gradient</source>
<translation type="unfinished">Free linear Gradient</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1012"/>
<location filename="../../scribus/cpalette.cpp" line="1014"/>
<source>Free radial Gradient</source>
<translation type="unfinished">Free radial Gradient</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1024"/>
<location filename="../../scribus/cpalette.cpp" line="1026"/>
<source>Hard Light</source>
<translation>強光</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1006"/>
<location filename="../../scribus/cpalette.cpp" line="1008"/>
<source>Horizontal Gradient</source>
<translation type="unfinished">水平梯度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1030"/>
<location filename="../../scribus/cpalette.cpp" line="1032"/>
<source>Hue</source>
<translation>色調</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1020"/>
<location filename="../../scribus/cpalette.cpp" line="1022"/>
<source>Lighten</source>
<translation>更亮</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1033"/>
<location filename="../../scribus/cpalette.cpp" line="1035"/>
<source>Luminosity</source>
<translation>亮度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1041"/>
<location filename="../../scribus/cpalette.cpp" line="1043"/>
<source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
<translation type="unfinished">Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1001"/>
<location filename="../../scribus/cpalette.cpp" line="1003"/>
<source>Move Vector</source>
<translation>移動向量</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1021"/>
<location filename="../../scribus/cpalette.cpp" line="1023"/>
<source>Multiply</source>
<translation type="unfinished">倍增</translation>
</message>
9702,92 → 12188,92
<translation type="obsolete">None</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1018"/>
<location filename="../../scribus/cpalette.cpp" line="1020"/>
<source>Normal</source>
<translation>普通</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1039"/>
<location filename="../../scribus/cpalette.cpp" line="1041"/>
<source>Normal or gradient fill method</source>
<translation type="unfinished">Normal or gradient fill method</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="986"/>
<location filename="../../scribus/cpalette.cpp" line="988"/>
<source>Offsets</source>
<translation>位移</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1000"/>
<location filename="../../scribus/cpalette.cpp" line="1002"/>
<source>Opacity:</source>
<translation>透明度:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1023"/>
<location filename="../../scribus/cpalette.cpp" line="1025"/>
<source>Overlay</source>
<translation>重疊</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1013"/>
<location filename="../../scribus/cpalette.cpp" line="1015"/>
<source>Pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1010"/>
<location filename="../../scribus/cpalette.cpp" line="1012"/>
<source>Radial Gradient</source>
<translation>半徑梯度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="996"/>
<location filename="../../scribus/cpalette.cpp" line="998"/>
<source>Rotation</source>
<translation>旋轉</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1031"/>
<location filename="../../scribus/cpalette.cpp" line="1033"/>
<source>Saturation</source>
<translation>飽和度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1038"/>
<location filename="../../scribus/cpalette.cpp" line="1040"/>
<source>Saturation of color</source>
<translation>Saturation of colour</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="991"/>
<location filename="../../scribus/cpalette.cpp" line="993"/>
<source>Scaling</source>
<translation>縮放</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1022"/>
<location filename="../../scribus/cpalette.cpp" line="1024"/>
<source>Screen</source>
<translation>螢幕</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1040"/>
<location filename="../../scribus/cpalette.cpp" line="1042"/>
<source>Set the transparency for the color selected</source>
<translation>Set the transparency for the colour selected</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="999"/>
<location filename="../../scribus/cpalette.cpp" line="1001"/>
<source>Shade:</source>
<translation>陰影:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1025"/>
<location filename="../../scribus/cpalette.cpp" line="1027"/>
<source>Soft Light</source>
<translation>柔光</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1015"/>
<location filename="../../scribus/cpalette.cpp" line="1017"/>
<source>Transparency Settings</source>
<translation>透明度設定</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="1007"/>
<location filename="../../scribus/cpalette.cpp" line="1009"/>
<source>Vertical Gradient</source>
<translation type="unfinished">垂直梯度</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="987"/>
<location filename="../../scribus/cpalette.cpp" line="989"/>
<source>X:</source>
<translation>X:</translation>
</message>
9802,12 → 12288,12
<translation type="obsolete">X2:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="992"/>
<location filename="../../scribus/cpalette.cpp" line="994"/>
<source>X-Scale:</source>
<translation>X-縮放:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="989"/>
<location filename="../../scribus/cpalette.cpp" line="991"/>
<source>Y:</source>
<translation>Y:</translation>
</message>
9822,7 → 12308,7
<translation type="obsolete">Y2:</translation>
</message>
<message>
<location filename="../../scribus/cpalette.cpp" line="994"/>
<location filename="../../scribus/cpalette.cpp" line="996"/>
<source>Y-Scale:</source>
<translation>Y-縮放:</translation>
</message>
10389,12 → 12875,12
<context>
<name>DocIm</name>
<message>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="171"/>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="160"/>
<source>Importing failed</source>
<translation>匯入失敗</translation>
</message>
<message>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="172"/>
<location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="161"/>
<source>Importing Word document failed
%1</source>
<translation>匯入 Word 檔案失敗
11227,37 → 13713,37
<context>
<name>EPSPlug</name>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="78"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="79"/>
<source>Analyzing PostScript:</source>
<translation>分析 PostScript:</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="871"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="864"/>
<source>Converting of %1 images failed!</source>
<translation>轉換圖片 %1 失敗!</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="872"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="865"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="475"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="468"/>
<source>Fatal Error</source>
<translation>嚴重錯誤</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="480"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="473"/>
<source>Generating Items</source>
<translation>產生物件中</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="738"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="731"/>
<source>Group%1</source>
<translation>群組%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="474"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="467"/>
<source>Importing File:
%1
failed!</source>
11271,7 → 13757,7
<translation type="obsolete">匯入 PostScript</translation>
</message>
<message>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="75"/>
<location filename="../../scribus/plugins/psimport/importps.cpp" line="76"/>
<source>Importing: %1</source>
<translation>正在匯入: %1</translation>
</message>
11563,12 → 14049,12
<translation>可用效果</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1387"/>
<location filename="../../scribus/effectsdialog.cpp" line="1393"/>
<source>Blur</source>
<translation>模糊</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1365"/>
<location filename="../../scribus/effectsdialog.cpp" line="1371"/>
<source>Brightness</source>
<translation>亮度</translation>
</message>
11578,7 → 14064,7
<translation>亮度:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="615"/>
<location filename="../../scribus/effectsdialog.cpp" line="620"/>
<source>Cancel</source>
<translation>取消</translation>
</message>
11608,12 → 14094,12
<translation>顔色:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1356"/>
<location filename="../../scribus/effectsdialog.cpp" line="1362"/>
<source>Colorize</source>
<translation>顔色化</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1371"/>
<location filename="../../scribus/effectsdialog.cpp" line="1377"/>
<source>Contrast</source>
<translation>對比</translation>
</message>
11623,12 → 14109,12
<translation>對比:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1559"/>
<location filename="../../scribus/effectsdialog.cpp" line="1565"/>
<source>Curves</source>
<translation>曲線</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1406"/>
<location filename="../../scribus/effectsdialog.cpp" line="1412"/>
<source>Duotone</source>
<translation type="unfinished"></translation>
</message>
11638,7 → 14124,7
<translation>使用中效果</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="973"/>
<location filename="../../scribus/effectsdialog.cpp" line="981"/>
<source>Grayscale</source>
<translation>灰度</translation>
</message>
11648,12 → 14134,12
<translation>圖片效果</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="975"/>
<location filename="../../scribus/effectsdialog.cpp" line="983"/>
<source>Invert</source>
<translation>反轉</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="611"/>
<location filename="../../scribus/effectsdialog.cpp" line="616"/>
<source>OK</source>
<translation>確定</translation>
</message>
11663,7 → 14149,7
<translation>選項:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1400"/>
<location filename="../../scribus/effectsdialog.cpp" line="1406"/>
<source>Posterize</source>
<translation>海報效果化</translation>
</message>
11673,7 → 14159,7
<translation>海報效果化:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1493"/>
<location filename="../../scribus/effectsdialog.cpp" line="1499"/>
<source>Quadtone</source>
<translation type="unfinished"></translation>
</message>
11688,12 → 14174,12
<translation>陰影:</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1377"/>
<location filename="../../scribus/effectsdialog.cpp" line="1383"/>
<source>Sharpen</source>
<translation>銳化</translation>
</message>
<message>
<location filename="../../scribus/effectsdialog.cpp" line="1442"/>
<location filename="../../scribus/effectsdialog.cpp" line="1448"/>
<source>Tritone</source>
<translation type="unfinished"></translation>
</message>
11706,27 → 14192,27
<context>
<name>ExportBitmap</name>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="219"/>
<source>Error writing the output file(s).</source>
<translation>寫入輸出檔案錯誤。</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="190"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="205"/>
<source>exists already. Overwrite?</source>
<translation>已經存在, 要覆蓋嗎?</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="189"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
<source>File exists. Overwrite?</source>
<translation>檔案已存在, 要覆蓋嗎?</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="177"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="192"/>
<source>Insufficient memory for this image size.</source>
<translation>這個圖片尺寸所需的記憶體不足。</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="203"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="218"/>
<source>Save as Image</source>
<translation>另存爲圖片</translation>
</message>
11749,7 → 14235,7
<translation>全部頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="125"/>
<source>Available export formats</source>
<translation>可用匯出格式</translation>
</message>
11759,7 → 14245,7
<translation type="obsolete">C</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="120"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="127"/>
<source>Change the output directory</source>
<translation>更改輸出目錄</translation>
</message>
11769,7 → 14255,7
<translation>更改 (&amp;H)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="73"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="80"/>
<source>Choose a Export Directory</source>
<translation>選擇一個匯出目錄</translation>
</message>
11779,12 → 14265,12
<translation>目前頁面 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="110"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
<source>Export a range of pages</source>
<translation>匯出一個頁面範圍</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="112"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
<source>Export all pages</source>
<translation>輸出所有頁</translation>
</message>
11794,7 → 14280,7
<translation>匯出成圖片</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="113"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="120"/>
<source>Export only the current page</source>
<translation>僅匯出目前頁面</translation>
</message>
11814,7 → 14300,7
<translation>圖片類型 (&amp;T):</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="111"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
<source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
11842,7 → 14328,7
<translation>範圍 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="114"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="121"/>
<source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
<translation>圖片的解析度。
11854,7 → 14340,7
<translation>解析度 (&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="115"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="122"/>
<source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
<translation>圖片尺寸。100% 爲沒有更改, 200% 是兩倍大, 以此類推。</translation>
</message>
11869,7 → 14355,7
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="126"/>
<source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
<translation>輸出目錄是儲存你的圖片的地方。
11881,12 → 14367,12
<translation type="obsolete">圖片的品質, 100% 爲最好, 1% 爲最低</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="116"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="123"/>
<source>The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use &apos;Automatic&apos;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
<location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="124"/>
<source>Automatic</source>
<translation type="unfinished"></translation>
</message>
12105,12 → 14591,12
<context>
<name>FileLoader</name>
<message>
<location filename="../../scribus/fileloader.cpp" line="595"/>
<location filename="../../scribus/fileloader.cpp" line="596"/>
<source> was replaced by: </source>
<translation> 已被替代成: </translation>
</message>
<message>
<location filename="../../scribus/fileloader.cpp" line="591"/>
<location filename="../../scribus/fileloader.cpp" line="592"/>
<source>Some fonts used by this document have been substituted:</source>
<translation>這個檔案使用的一些字體被替代爲:</translation>
</message>
12680,12 → 15166,12
<context>
<name>GradientEditor</name>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="325"/>
<location filename="../../scribus/gradienteditor.cpp" line="328"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="333"/>
<location filename="../../scribus/gradienteditor.cpp" line="336"/>
<source>Add, change or remove color stops here</source>
<translation>在這裡增加, 更改或者刪除顔色節點</translation>
</message>
12695,7 → 15181,7
<translation type="obsolete">這裡你可以增加, 更改或者刪除顔色節點。</translation>
</message>
<message>
<location filename="../../scribus/gradienteditor.cpp" line="324"/>
<location filename="../../scribus/gradienteditor.cpp" line="327"/>
<source>Position:</source>
<translation>位置:</translation>
</message>
12711,72 → 15197,72
<context>
<name>GuideManager</name>
<message>
<location filename="../../scribus/guidemanager.ui" line="64"/>
<location filename="../../scribus/guidemanager.ui" line="55"/>
<source>&amp;Add</source>
<translation>增加 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="100"/>
<location filename="../../scribus/guidemanager.ui" line="94"/>
<source>A&amp;dd</source>
<translation>增加 (&amp;D)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="246"/>
<location filename="../../scribus/guidemanager.cpp" line="253"/>
<source>Add a new horizontal guide</source>
<translation>增加新的水平參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="248"/>
<location filename="../../scribus/guidemanager.cpp" line="255"/>
<source>Add a new vertical guide</source>
<translation>增加新的垂直參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="362"/>
<location filename="../../scribus/guidemanager.ui" line="356"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="103"/>
<location filename="../../scribus/guidemanager.ui" line="97"/>
<source>Alt+D</source>
<translation>Alt+D</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="313"/>
<location filename="../../scribus/guidemanager.ui" line="307"/>
<source>Alt+E</source>
<translation>Alt+E</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="271"/>
<location filename="../../scribus/guidemanager.ui" line="265"/>
<source>Alt+G</source>
<translation>Alt+G</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="128"/>
<location filename="../../scribus/guidemanager.ui" line="122"/>
<source>Alt+L</source>
<translation>Alt+L</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="349"/>
<location filename="../../scribus/guidemanager.ui" line="343"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="184"/>
<location filename="../../scribus/guidemanager.ui" line="178"/>
<source>Alt+S</source>
<translation>Alt+S</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="329"/>
<location filename="../../scribus/guidemanager.ui" line="323"/>
<source>Alt+Y</source>
<translation>Alt+Y</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="262"/>
<location filename="../../scribus/guidemanager.cpp" line="269"/>
<source>Apply the shown guides to all pages in the document</source>
<translation>套用在文件中的所有頁面顯示參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="251"/>
<location filename="../../scribus/guidemanager.cpp" line="258"/>
<source>Apply to all pages</source>
<translation>套用到所有頁面</translation>
</message>
12786,7 → 15272,7
<translation type="obsolete">套用到所有頁面 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="326"/>
<location filename="../../scribus/guidemanager.ui" line="320"/>
<source>Appl&amp;y to All Pages</source>
<translation>套用到所有頁面 (&amp;Y)</translation>
</message>
12801,7 → 15287,7
<translation type="obsolete">列距 (&amp;N)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="146"/>
<location filename="../../scribus/guidemanager.ui" line="140"/>
<source>&amp;Column/Row</source>
<translation type="unfinished"></translation>
</message>
12811,92 → 15297,92
<translation type="obsolete">列 (&amp;O):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="255"/>
<location filename="../../scribus/guidemanager.cpp" line="262"/>
<source>Create columns with guides, with an additional gap between the columns</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="254"/>
<location filename="../../scribus/guidemanager.cpp" line="261"/>
<source>Create rows with guides, with an additional gap between the rows</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="256"/>
<location filename="../../scribus/guidemanager.cpp" line="263"/>
<source>Create the selected number of horizontal guides relative to the current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="257"/>
<location filename="../../scribus/guidemanager.cpp" line="264"/>
<source>Create the selected number of horizontal guides relative to the current page&apos;s margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="258"/>
<location filename="../../scribus/guidemanager.cpp" line="265"/>
<source>Create the selected number of horizontal guides relative to the current selection of items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="259"/>
<location filename="../../scribus/guidemanager.cpp" line="266"/>
<source>Create the selected number of vertical guides relative to the current page</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="260"/>
<location filename="../../scribus/guidemanager.cpp" line="267"/>
<source>Create the selected number of vertical guides relative to the current page&apos;s margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="261"/>
<location filename="../../scribus/guidemanager.cpp" line="268"/>
<source>Create the selected number of vertical guides relative to the current selection of items</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="74"/>
<location filename="../../scribus/guidemanager.ui" line="65"/>
<source>D&amp;elete</source>
<translation>刪除 (&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="110"/>
<location filename="../../scribus/guidemanager.ui" line="104"/>
<source>De&amp;lete</source>
<translation>刪除 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="264"/>
<location filename="../../scribus/guidemanager.cpp" line="271"/>
<source>Delete all guides from all pages</source>
<translation>刪除所有頁面的所有參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="356"/>
<location filename="../../scribus/guidemanager.ui" line="350"/>
<source>Delete all guides from the current document</source>
<translation>刪除目前文件的所有參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="343"/>
<location filename="../../scribus/guidemanager.ui" line="337"/>
<source>Delete all guides from the current page</source>
<translation>刪除目前頁面的所有參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="263"/>
<location filename="../../scribus/guidemanager.cpp" line="270"/>
<source>Delete all guides shown on the current page</source>
<translation>刪除顯示在目前頁面的所有參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="359"/>
<location filename="../../scribus/guidemanager.ui" line="353"/>
<source>Delete Guides from &amp;All Pages</source>
<translation>刪除所有頁面的參考線 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="346"/>
<location filename="../../scribus/guidemanager.ui" line="340"/>
<source>Delete Guides from Current &amp;Page</source>
<translation>刪除目前頁面的參考線 (&amp;P)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="247"/>
<location filename="../../scribus/guidemanager.cpp" line="254"/>
<source>Delete the selected horizontal guide</source>
<translation>刪除所選的水平參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="249"/>
<location filename="../../scribus/guidemanager.cpp" line="256"/>
<source>Delete the selected vertical guide</source>
<translation>刪除所選的垂直參考線</translation>
</message>
12916,17 → 15402,17
<translation type="obsolete">水平參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="152"/>
<location filename="../../scribus/guidemanager.ui" line="146"/>
<source>Horizontals</source>
<translation>水平</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="125"/>
<location filename="../../scribus/guidemanager.ui" line="119"/>
<source>&amp;Lock Guides</source>
<translation>鎖定參考線 (&amp;L)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="250"/>
<location filename="../../scribus/guidemanager.cpp" line="257"/>
<source>Lock the guides</source>
<translation>鎖定參考線</translation>
</message>
12941,37 → 15427,37
<translation type="obsolete">頁面邊距 (&amp;M)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="300"/>
<location filename="../../scribus/guidemanager.ui" line="294"/>
<source>M&amp;argins</source>
<translation>邊距 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="337"/>
<location filename="../../scribus/guidemanager.ui" line="331"/>
<source>&amp;Misc</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="252"/>
<location filename="../../scribus/guidemanager.cpp" line="259"/>
<source>Number of horizontal guides to create</source>
<translation>產生的水平參考線數目</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.cpp" line="253"/>
<location filename="../../scribus/guidemanager.cpp" line="260"/>
<source>Number of vertical guides to create</source>
<translation>產生的垂直參考線數目</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="245"/>
<location filename="../../scribus/guidemanager.ui" line="239"/>
<source>Nu&amp;mber:</source>
<translation>數目 (&amp;M):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="158"/>
<location filename="../../scribus/guidemanager.ui" line="152"/>
<source>&amp;Number:</source>
<translation>數目 (&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="287"/>
<location filename="../../scribus/guidemanager.ui" line="281"/>
<source>&amp;Page</source>
<translation>頁面 (&amp;P)</translation>
</message>
12981,7 → 15467,7
<translation type="obsolete">預覽</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="281"/>
<location filename="../../scribus/guidemanager.ui" line="275"/>
<source>Refer To</source>
<translation type="unfinished"></translation>
</message>
13006,7 → 15492,7
<translation type="obsolete">行 (&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="310"/>
<location filename="../../scribus/guidemanager.ui" line="304"/>
<source>S&amp;election</source>
<translation>選擇 (&amp;S)</translation>
</message>
13022,7 → 15508,7
<translation type="obsolete">在檔案設定參考線。參考線管理器還是打開狀態,但是更改是延續的</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="43"/>
<location filename="../../scribus/guidemanager.ui" line="31"/>
<source>&amp;Single</source>
<translation type="unfinished"></translation>
</message>
13042,12 → 15528,12
<translation type="obsolete">更新 (&amp;U)</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="181"/>
<location filename="../../scribus/guidemanager.ui" line="175"/>
<source>U&amp;se Gap:</source>
<translation>使用間距 (&amp;S):</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="268"/>
<location filename="../../scribus/guidemanager.ui" line="262"/>
<source>Use &amp;Gap:</source>
<translation>使用間距 (&amp;G):</translation>
</message>
13057,7 → 15543,7
<translation type="obsolete">垂直參考線</translation>
</message>
<message>
<location filename="../../scribus/guidemanager.ui" line="239"/>
<location filename="../../scribus/guidemanager.ui" line="233"/>
<source>Verticals</source>
<translation>垂直</translation>
</message>
13308,7 → 15794,7
<translation type="obsolete">A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option.</translation>
</message>
<message>
<location filename="../../scribus/hysettings.cpp" line="113"/>
<location filename="../../scribus/hysettings.cpp" line="121"/>
<source>Add a new Entry</source>
<translation type="unfinished"></translation>
</message>
13318,7 → 15804,7
<translation type="obsolete">允許連續連字元 (&amp;A):</translation>
</message>
<message>
<location filename="../../scribus/hysettings.cpp" line="125"/>
<location filename="../../scribus/hysettings.cpp" line="133"/>
<source>Edit Entry</source>
<translation type="unfinished"></translation>
</message>
13328,7 → 15814,7
<translation type="obsolete">啓用在輸入時自動用連字元。</translation>
</message>
<message>
<location filename="../../scribus/hysettings.cpp" line="125"/>
<location filename="../../scribus/hysettings.cpp" line="133"/>
<source>Exception List</source>
<translation>例外清單</translation>
</message>
13343,7 → 15829,7
<translation type="obsolete">連字元提示 (&amp;H)</translation>
</message>
<message>
<location filename="../../scribus/hysettings.cpp" line="84"/>
<location filename="../../scribus/hysettings.cpp" line="92"/>
<source>Ignore List</source>
<translation>忽略清單</translation>
</message>
14540,7 → 17026,7
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="587"/>
<location filename="../../scribus/layers.cpp" line="589"/>
<source>Add a new layer</source>
<translation>增加圖層</translation>
</message>
14565,7 → 17051,7
<translation type="unfinished">顔色模糊</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="592"/>
<location filename="../../scribus/layers.cpp" line="596"/>
<source>Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. </source>
<translation type="unfinished"></translation>
</message>
14575,7 → 17061,7
<translation>更暗</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="589"/>
<location filename="../../scribus/layers.cpp" line="591"/>
<source>Delete layer</source>
<translation>刪除圖層</translation>
</message>
14595,7 → 17081,7
<translation>你確定要一併刪除此圖層上的所有物件嗎?</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="588"/>
<location filename="../../scribus/layers.cpp" line="590"/>
<source>Duplicates the current layer</source>
<translation>複製目前的圖層</translation>
</message>
14625,12 → 17111,12
<translation>更亮</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="595"/>
<location filename="../../scribus/layers.cpp" line="599"/>
<source>Lock or Unlock Layer - Unchecked is unlocked </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="591"/>
<location filename="../../scribus/layers.cpp" line="593"/>
<source>Lower layer</source>
<translation>降低圖層</translation>
</message>
14640,7 → 17126,7
<translation>亮度</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="593"/>
<location filename="../../scribus/layers.cpp" line="597"/>
<source>Make Layer Visible - Uncheck to hide the layer from the display </source>
<translation type="unfinished"></translation>
</message>
14655,7 → 17141,7
<translation>名稱</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="598"/>
<location filename="../../scribus/layers.cpp" line="602"/>
<source>Name of the Layer - Double clicking on the name of a layer enabled editing</source>
<translation type="unfinished"></translation>
</message>
14670,7 → 17156,7
<translation>透明度:</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="597"/>
<location filename="../../scribus/layers.cpp" line="601"/>
<source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
<translation type="unfinished"></translation>
</message>
14680,12 → 17166,12
<translation>重疊</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="594"/>
<location filename="../../scribus/layers.cpp" line="598"/>
<source>Print Layer - Uncheck to disable printing. </source>
<translation>列印圖層 - 不核取來取消列印。 </translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="590"/>
<location filename="../../scribus/layers.cpp" line="592"/>
<source>Raise layer</source>
<translation>升高圖層</translation>
</message>
14705,20 → 17191,30
<translation>柔光</translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="596"/>
<location filename="../../scribus/layers.cpp" line="600"/>
<source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="594"/>
<source>Selects the Blendmode, works only in PDF-1.4</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/layers.cpp" line="595"/>
<source>Layer Transparency, works only in PDF-1.4 and SVG</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>LegacyMode</name>
<message>
<location filename="../../scribus/canvasmode_legacy.cpp" line="4994"/>
<location filename="../../scribus/canvasmode_legacy.cpp" line="4993"/>
<source>All Supported Formats</source>
<translation>全部支援的格式</translation>
</message>
<message>
<location filename="../../scribus/canvasmode_legacy.cpp" line="5024"/>
<location filename="../../scribus/canvasmode_legacy.cpp" line="5023"/>
<source>Open</source>
<translation>打開</translation>
</message>
15272,22 → 17768,22
<message>
<location filename="../../scribus/marginwidget.cpp" line="144"/>
<source>Distance for bleed from the bottom of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the bottom of the physical page</translation>
</message>
<message>
<location filename="../../scribus/marginwidget.cpp" line="145"/>
<source>Distance for bleed from the left of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the left of the physical page</translation>
</message>
<message>
<location filename="../../scribus/marginwidget.cpp" line="146"/>
<source>Distance for bleed from the right of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the right of the physical page</translation>
</message>
<message>
<location filename="../../scribus/marginwidget.cpp" line="143"/>
<source>Distance for bleed from the top of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the top of the physical page</translation>
</message>
<message>
<location filename="../../scribus/marginwidget.cpp" line="104"/>
15368,12 → 17864,12
<translation>增加一個新的主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="291"/>
<location filename="../../scribus/masterpagepalette.cpp" line="297"/>
<source>Copy #%1 of </source>
<translation>複製 #%1 的 </translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="135"/>
<location filename="../../scribus/masterpagepalette.cpp" line="141"/>
<source>Copy #%1 of %2</source>
<translation>複製 #%1 之 %2</translation>
</message>
15388,7 → 17884,7
<translation>刪除目前選擇的主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="110"/>
<location filename="../../scribus/masterpagepalette.cpp" line="116"/>
<source>Do you really want to delete this master page?</source>
<translation>你確認要刪除這個主頁嗎?</translation>
</message>
15408,32 → 17904,32
<translation>從另外一個檔案匯入主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="238"/>
<location filename="../../scribus/masterpagepalette.cpp" line="244"/>
<source>Name:</source>
<translation>名稱:</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="137"/>
<location filename="../../scribus/masterpagepalette.cpp" line="143"/>
<source>&amp;Name:</source>
<translation>名稱 (&amp;N):</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="137"/>
<location filename="../../scribus/masterpagepalette.cpp" line="143"/>
<source>New Master Page</source>
<translation>新建主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="238"/>
<location filename="../../scribus/masterpagepalette.cpp" line="244"/>
<source>New Master Page %1</source>
<translation>新建主頁 %1</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="238"/>
<location filename="../../scribus/masterpagepalette.cpp" line="244"/>
<source>New MasterPage</source>
<translation>新建主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="385"/>
<location filename="../../scribus/masterpagepalette.cpp" line="391"/>
<source>New Name:</source>
<translation>新名稱:</translation>
</message>
15448,17 → 17944,17
<translation type="obsolete">普通</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="385"/>
<location filename="../../scribus/masterpagepalette.cpp" line="391"/>
<source>Rename Master Page</source>
<translation>重新命名主頁</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="381"/>
<location filename="../../scribus/masterpagepalette.cpp" line="387"/>
<source>The Normal page is not allowed to be renamed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="381"/>
<location filename="../../scribus/masterpagepalette.cpp" line="387"/>
<source>Unable to Rename Master Page</source>
<translation>無法重新命名主頁</translation>
</message>
15467,6 → 17963,11
<source>&amp;Yes</source>
<translation type="obsolete">是 (&amp;Y)</translation>
</message>
<message>
<location filename="../../scribus/masterpagepalette.cpp" line="112"/>
<source>This master page is used at least once in the document.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Mdup</name>
15494,7 → 17995,7
<context encoding="UTF-8">
<name>Measurements</name>
<message encoding="UTF-8">
<location filename="../../scribus/measurements.cpp" line="69"/>
<location filename="../../scribus/measurements.cpp" line="51"/>
<source> °</source>
<translation> °</translation>
</message>
15562,45 → 18063,50
<translation type="unfinished">X1:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="239"/>
<location filename="../../scribus/measurementsbase.ui" line="145"/>
<source>10000.0000</source>
<translation type="unfinished">10000.0000</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="52"/>
<location filename="../../scribus/measurementsbase.ui" line="36"/>
<source>Y1:</source>
<translation type="unfinished">Y1:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="82"/>
<location filename="../../scribus/measurementsbase.ui" line="53"/>
<source>X2:</source>
<translation type="unfinished">X2:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="112"/>
<location filename="../../scribus/measurementsbase.ui" line="70"/>
<source>Y2:</source>
<translation type="unfinished">Y2:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="142"/>
<location filename="../../scribus/measurementsbase.ui" line="87"/>
<source>Length:</source>
<translation type="unfinished">長度:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="172"/>
<location filename="../../scribus/measurementsbase.ui" line="104"/>
<source>DX:</source>
<translation type="unfinished">DX:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="202"/>
<location filename="../../scribus/measurementsbase.ui" line="121"/>
<source>DY:</source>
<translation type="unfinished">DY:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="232"/>
<location filename="../../scribus/measurementsbase.ui" line="138"/>
<source>Angle:</source>
<translation type="unfinished">角度:</translation>
</message>
<message>
<location filename="../../scribus/measurementsbase.ui" line="155"/>
<source>Unit:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MergeDoc</name>
15632,7 → 18138,7
<message>
<location filename="../../scribus/mergedoc.cpp" line="52"/>
<source>Chan&amp;ge...</source>
<translation>更改 (&amp;C)...</translation>
<translation type="obsolete">更改 (&amp;C)...</translation>
</message>
<message>
<location filename="../../scribus/mergedoc.cpp" line="78"/>
15689,6 → 18195,11
<source>Open</source>
<translation>打開</translation>
</message>
<message>
<location filename="../../scribus/mergedoc.cpp" line="52"/>
<source>&amp;Select...</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MeshDistortionDialog</name>
16857,12 → 19368,12
<context>
<name>NewDoc</name>
<message>
<location filename="../../scribus/newfile.cpp" line="299"/>
<location filename="../../scribus/newfile.cpp" line="301"/>
<source>&amp;Automatic Text Frames</source>
<translation>自動文字框 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="301"/>
<location filename="../../scribus/newfile.cpp" line="303"/>
<source>Colu&amp;mns:</source>
<translation>列 (&amp;M):</translation>
</message>
16882,7 → 19393,7
<translation>編輯檔案時預設使用的尺寸單位</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="289"/>
<location filename="../../scribus/newfile.cpp" line="291"/>
<source>&amp;Default Unit:</source>
<translation>預設單位 (&amp;D):</translation>
</message>
16922,7 → 19433,7
<translation type="obsolete">起始頁碼 (&amp;I):</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="309"/>
<location filename="../../scribus/newfile.cpp" line="311"/>
<source>&amp;Gap:</source>
<translation>間距 (&amp;G):</translation>
</message>
16967,12 → 19478,12
<translation>自動建立的文字框裡的列數</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="283"/>
<location filename="../../scribus/newfile.cpp" line="285"/>
<source>N&amp;umber of Pages:</source>
<translation>頁面數 (&amp;U):</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="354"/>
<location filename="../../scribus/newfile.cpp" line="356"/>
<source>Open</source>
<translation>打開</translation>
</message>
17012,7 → 19523,7
<translation>直式</translation>
</message>
<message>
<location filename="../../scribus/newfile.cpp" line="321"/>
<location filename="../../scribus/newfile.cpp" line="323"/>
<source>Show Document Settings After Creation</source>
<translation>當產生之後顯示文件的設定</translation>
</message>
17053,7 → 19564,7
<context>
<name>NodePalette</name>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="891"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="899"/>
<source> %</source>
<translation> %</translation>
</message>
17063,97 → 19574,97
<translation type="obsolete">% 來增加或減少</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="925"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="934"/>
<source>% to Enlarge or Shrink By</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="893"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="901"/>
<source>&amp;Absolute Coordinates</source>
<translation>絕對座標 (&amp;A)</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="927"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="936"/>
<source>Activate Contour Line Editing Mode</source>
<translation>啟動輪廓線條編輯模式</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="904"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="913"/>
<source>Add Nodes</source>
<translation>增加節點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="924"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="933"/>
<source>Angle of Rotation</source>
<translation>旋轉角度</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="911"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="920"/>
<source>Close this Bezier Curve</source>
<translation>關閉這個貝茲 (Bezier) 曲線</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="905"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="914"/>
<source>Delete Nodes</source>
<translation>刪除節點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="898"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="906"/>
<source>Edit &amp;Contour Line</source>
<translation>編輯輪廓線 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="901"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="910"/>
<source>&amp;End Editing</source>
<translation>結束編輯 (&amp;E)</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="921"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="930"/>
<source>Enlarge the Size of the Path by shown %</source>
<translation type="unfinished">按所示增加路徑尺寸 %</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="923"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="932"/>
<source>Enlarge the Size of the Path by the shown value</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="912"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="921"/>
<source>Mirror the Path Horizontally</source>
<translation>水平鏡像路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="913"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="922"/>
<source>Mirror the Path Vertically</source>
<translation>垂直鏡像路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="903"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="912"/>
<source>Move Control Points</source>
<translation>移動控制點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="906"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="915"/>
<source>Move Control Points Independently</source>
<translation>獨立移動控制點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="907"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="916"/>
<source>Move Control Points Symmetrical</source>
<translation>對稱移動控制點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="902"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="911"/>
<source>Move Nodes</source>
<translation>移動節點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="890"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="898"/>
<source>Nodes</source>
<translation>節點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="910"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="919"/>
<source>Open a Polygon or Cuts a Bezier Curve</source>
<translation>打開一個多邊形或剪下貝茲 (Bezier) 曲線</translation>
</message>
17163,115 → 19674,125
<translation type="obsolete">按所示減少路徑尺寸 %</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="922"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="931"/>
<source>Reduce the Size of the Path by the shown value</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="899"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="907"/>
<source>&amp;Reset Contour Line</source>
<translation>重置輪廓線 (&amp;R)</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="908"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="917"/>
<source>Reset Control Points</source>
<translation>重置控制點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="929"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="938"/>
<source>Reset the Contour Line to the Clipping Path of the Image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="928"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="937"/>
<source>Reset the Contour Line to the Original Shape of the Frame</source>
<translation type="unfinished">Reset the Contour Line to the Original Shape of the Frame</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="909"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="918"/>
<source>Reset this Control Point</source>
<translation>重置這個節點</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="919"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="928"/>
<source>Rotate the Path Clockwise</source>
<translation>順時針旋轉路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="918"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="927"/>
<source>Rotate the Path Counter-Clockwise</source>
<translation>逆時針旋轉路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="900"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="908"/>
<source>Set Contour to Image Clip</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="915"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="924"/>
<source>Shear the Path Horizontally to the Left</source>
<translation type="unfinished">向左水平切變路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="914"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="923"/>
<source>Shear the Path Horizontally to the Right</source>
<translation type="unfinished">Shear the Path Horizontally to the Right</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="917"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="926"/>
<source>Shear the Path Vertically Down</source>
<translation type="unfinished">向下垂直切變路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="916"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="925"/>
<source>Shear the Path Vertically Up</source>
<translation type="unfinished">向上垂直切變路徑</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="920"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="929"/>
<source>Shrink the Size of the Path by shown %</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="894"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="902"/>
<source>to Canvas</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="895"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="903"/>
<source>to Page</source>
<translation>到頁面</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="926"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="935"/>
<source>Value to Enlarge or Shrink By</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="930"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="940"/>
<source>When checked use coordinates relative to the page, otherwise coordinates are relative to the Object.</source>
<translation type="unfinished">When checked use coordinates relative to the page, otherwise coordinates are relative to the Object.</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="896"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="904"/>
<source>&amp;X-Pos:</source>
<translation>X-座標 (&amp;X):</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="897"/>
<location filename="../../scribus/nodeeditpalette.cpp" line="905"/>
<source>&amp;Y-Pos:</source>
<translation>Y-座標 (&amp;Y):</translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="909"/>
<source>Set Shape to Image Clip</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/nodeeditpalette.cpp" line="939"/>
<source>Set the Shape to the Clipping Path of the Image</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>OODPlug</name>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="687"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="632"/>
<source>Group%1</source>
<translation>群組%1</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="296"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="297"/>
<source>This document does not seem to be an OpenOffice Draw file.</source>
<translation>這個檔案似乎不是 OpenOffice Draw 檔案。</translation>
</message>
17279,39 → 19800,39
<context>
<name>OODrawImportPlugin</name>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="95"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="96"/>
<source>Import &amp;OpenOffice.org Draw...</source>
<translation>匯入OpenOffice.org Draw (&amp;O)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="111"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="112"/>
<source>Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects.</source>
<translation type="unfinished">Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects.</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="110"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="111"/>
<source>Imports OpenOffice.org Draw Files</source>
<translation>匯入 OpenOffice.org Draw 檔案</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="125"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="126"/>
<source>OpenDocument 1.0 Draw</source>
<comment>Import/export format name</comment>
<translation>OpenDocument 1.0 Draw</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="137"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="138"/>
<source>OpenOffice.org 1.x Draw</source>
<comment>Import/export format name</comment>
<translation>OpenOffice.org 1.x Draw</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="205"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="206"/>
<source>The file could not be imported</source>
<translation>這個檔案無法被匯入</translation>
</message>
<message>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="207"/>
<location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="208"/>
<source>This file contains some unsupported features</source>
<translation>這個檔案包含了一些不被支援的功能</translation>
</message>
17463,14 → 19984,14
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/outlinepalette.cpp" line="141"/>
<source>Ctrl+f</source>
<comment>Filter the Outline using a keyword</comment>
<location filename="../../scribus/outlinepalette.cpp" line="909"/>
<source>Filter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/outlinepalette.cpp" line="909"/>
<source>Filter:</source>
<location filename="../../scribus/outlinepalette.cpp" line="141"/>
<source>Ctrl+F</source>
<comment>Filter the Outline using a keyword</comment>
<translation type="unfinished"></translation>
</message>
</context>
17529,7 → 20050,7
<message>
<location filename="../../scribus/pdfopts.cpp" line="204"/>
<source>Save as</source>
<translation>另存新檔</translation>
<translation type="obsolete">另存新檔</translation>
</message>
<message>
<location filename="../../scribus/pdfopts.cpp" line="152"/>
17546,11 → 20067,16
<source>This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pdfopts.cpp" line="204"/>
<source>Save As</source>
<translation type="unfinished">另存新檔</translation>
</message>
</context>
<context>
<name>PDFLibCore</name>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="2529"/>
<location filename="../../scribus/pdflib_core.cpp" line="2545"/>
<source>Date:</source>
<translation>日期:</translation>
</message>
17570,27 → 20096,27
<translation>匯出頁面:</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="7530"/>
<location filename="../../scribus/pdflib_core.cpp" line="7659"/>
<source>Failed to load an image : %1</source>
<translation>載入圖片: %1 失敗</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="7540"/>
<location filename="../../scribus/pdflib_core.cpp" line="7669"/>
<source>Failed to load an image mask : %1</source>
<translation>載入圖片遮罩: %1 失敗</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="7535"/>
<location filename="../../scribus/pdflib_core.cpp" line="7664"/>
<source>Failed to write an image : %1</source>
<translation>寫入圖片: %1 失敗</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="7545"/>
<location filename="../../scribus/pdflib_core.cpp" line="7674"/>
<source>Insufficient memory for processing an image</source>
<translation>處理圖片所需要的記憶體不足</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="2516"/>
<location filename="../../scribus/pdflib_core.cpp" line="2532"/>
<source>Page:</source>
<translation>頁:</translation>
</message>
17600,7 → 20126,7
<translation>儲存 PDF</translation>
</message>
<message>
<location filename="../../scribus/pdflib_core.cpp" line="7525"/>
<location filename="../../scribus/pdflib_core.cpp" line="7654"/>
<source>A write error occured, please check available disk space</source>
<translation type="unfinished"></translation>
</message>
17681,7 → 20207,7
<message>
<location filename="../../scribus/preview.cpp" line="242"/>
<source>Clip to Page Margins</source>
<translation>裁切到頁邊</translation>
<translation type="obsolete">裁切到頁邊</translation>
</message>
<message>
<location filename="../../scribus/preview.cpp" line="294"/>
17863,11 → 20389,16
<source>Yellow</source>
<translation>黃</translation>
</message>
<message>
<location filename="../../scribus/preview.cpp" line="242"/>
<source>Clip to Printer Margins</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PSLib</name>
<message>
<location filename="../../scribus/pslib.cpp" line="1788"/>
<location filename="../../scribus/pslib.cpp" line="1793"/>
<source>Exporting Page:</source>
<translation>匯出頁面:</translation>
</message>
17877,27 → 20408,27
<translation type="obsolete">匯出頁面:</translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1726"/>
<location filename="../../scribus/pslib.cpp" line="1731"/>
<source>Failed to load an image : %1</source>
<translation>載入圖片: %1 失敗</translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1731"/>
<location filename="../../scribus/pslib.cpp" line="1736"/>
<source>Failed to load an image mask : %1</source>
<translation>載入圖片遮罩: %1 失敗</translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1721"/>
<location filename="../../scribus/pslib.cpp" line="1726"/>
<source>Failed to write data for an image</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1736"/>
<location filename="../../scribus/pslib.cpp" line="1741"/>
<source>Insufficient memory for processing an image</source>
<translation>處理圖片所需要的記憶體不足</translation>
</message>
<message>
<location filename="../../scribus/pslib.cpp" line="1788"/>
<location filename="../../scribus/pslib.cpp" line="1793"/>
<source>Processing Master Page:</source>
<translation>處理主頁:</translation>
</message>
17910,37 → 20441,37
<context>
<name>PageItem</name>
<message>
<location filename="../../scribus/pageitem.cpp" line="3563"/>
<location filename="../../scribus/pageitem.cpp" line="3599"/>
<source>Copy of</source>
<translation type="unfinished">Copy of</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="368"/>
<location filename="../../scribus/pageitem.cpp" line="388"/>
<source>Image</source>
<translation>圖片</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="376"/>
<location filename="../../scribus/pageitem.cpp" line="396"/>
<source>Line</source>
<translation>線條</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="388"/>
<location filename="../../scribus/pageitem.cpp" line="408"/>
<source>PathText</source>
<translation>路徑文字</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="380"/>
<location filename="../../scribus/pageitem.cpp" line="400"/>
<source>Polygon</source>
<translation>多邊形</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="384"/>
<location filename="../../scribus/pageitem.cpp" line="404"/>
<source>Polyline</source>
<translation>線套</translation>
</message>
<message>
<location filename="../../scribus/pageitem.cpp" line="372"/>
<location filename="../../scribus/pageitem.cpp" line="392"/>
<source>Text</source>
<translation>文字</translation>
</message>
18150,45 → 20681,50
<context>
<name>PageItem_ImageFrame</name>
<message>
<location filename="../../scribus/pageitem_imageframe.cpp" line="404"/>
<location filename="../../scribus/pageitem_imageframe.cpp" line="411"/>
<source>Image</source>
<translation>圖片</translation>
</message>
<message>
<location filename="../../scribus/pageitem_imageframe.cpp" line="335"/>
<location filename="../../scribus/pageitem_imageframe.cpp" line="342"/>
<source>Preview Settings</source>
<translation>預覽設定</translation>
</message>
<message>
<location filename="../../scribus/pageitem_imageframe.cpp" line="266"/>
<source>Embedded Image</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageItem_LatexFrame</name>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="525"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="532"/>
<source>Application</source>
<translation>程式</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="226"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="233"/>
<source>Could not create a temporary file to run the application!</source>
<translation>無法產生一個暫時檔案來執行程式!</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="526"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="533"/>
<source>DPI</source>
<translation>DPI</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="531"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="538"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="533"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="540"/>
<source>Finished</source>
<translation>已完成</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="241"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="248"/>
<source>Information</source>
<translation>資訊</translation>
</message>
18203,17 → 20739,17
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="524"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="531"/>
<source>Render Frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="536"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="543"/>
<source>Running</source>
<translation>執行中</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="394"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="401"/>
<source>Running the application &quot;%1&quot; failed!</source>
<translation>執行程式 &quot;%1&quot; 失敗!</translation>
</message>
18223,30 → 20759,40
<translation type="obsolete">執行編輯器 &quot;%1&quot; 失敗!</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="160"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="161"/>
<source>Running the external application failed!</source>
<translation>執行外部程式失敗!</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="528"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="535"/>
<source>State</source>
<translation>狀態</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="388"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="395"/>
<source>The application &quot;%1&quot; crashed!</source>
<translation>程式 &quot;%1&quot; 崩潰!</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="384"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="391"/>
<source>The application &quot;%1&quot; failed to start!</source>
<translation>程式 &quot;%1&quot; 啟動失敗!</translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="246"/>
<location filename="../../scribus/pageitem_latexframe.cpp" line="253"/>
<source>The config file didn&apos;t specify a executable path!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="219"/>
<source>No configuration defined to run the application!</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pageitem_latexframe.cpp" line="407"/>
<source>No application defined</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PageItem_PathText</name>
18274,32 → 20820,32
<context>
<name>PageItem_TextFrame</name>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3427"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3450"/>
<source>Chars: </source>
<translation>字元: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3413"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3436"/>
<source>Lines: </source>
<translation>線條: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3399"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3422"/>
<source>Linked Text</source>
<translation>串聯的文字</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3405"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3428"/>
<source>Paragraphs: </source>
<translation>段落: </translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3401"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3424"/>
<source>Text Frame</source>
<translation>文字框</translation>
</message>
<message>
<location filename="../../scribus/pageitem_textframe.cpp" line="3419"/>
<location filename="../../scribus/pageitem_textframe.cpp" line="3442"/>
<source>Words: </source>
<translation>字: </translation>
</message>
18336,17 → 20882,17
<context>
<name>PagePalette</name>
<message>
<location filename="../../scribus/pagepalette.cpp" line="914"/>
<location filename="../../scribus/pagepalette.cpp" line="933"/>
<source>Arrange Pages</source>
<translation>管理頁面</translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="915"/>
<location filename="../../scribus/pagepalette.cpp" line="934"/>
<source>Available Master Pages:</source>
<translation>可用主頁:</translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="916"/>
<location filename="../../scribus/pagepalette.cpp" line="935"/>
<source>Document Pages:</source>
<translation>檔案頁:</translation>
</message>
18356,7 → 20902,7
<translation type="obsolete">雙面</translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="920"/>
<location filename="../../scribus/pagepalette.cpp" line="939"/>
<source>Drag pages or master pages onto the trash to delete them</source>
<translation type="unfinished"></translation>
</message>
18371,7 → 20917,7
<translation type="obsolete">這是你所有的主頁。要建立新頁, 請把主頁拖拉到下面的頁面視圖</translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="919"/>
<location filename="../../scribus/pagepalette.cpp" line="938"/>
<source>List of normal pages in the document, shown with the document layout. Pages may be dragged to rearrange or delete them.</source>
<translation type="unfinished"></translation>
</message>
18386,10 → 20932,20
<translation type="obsolete">普通</translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="918"/>
<location filename="../../scribus/pagepalette.cpp" line="937"/>
<source>List of master pages in the document. Master page names may be dragged onto the page view below to apply master pages, or onto the empty space between pages to create new pages.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="628"/>
<source>This master page is used at least once in the document.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/pagepalette.cpp" line="632"/>
<source>Do you really want to delete this master page?</source>
<translation type="unfinished">你確認要刪除這個主頁嗎?</translation>
</message>
</context>
<context>
<name>PageSelector</name>
18399,7 → 20955,7
<translation type="obsolete">%1 的 %1</translation>
</message>
<message>
<location filename="../../scribus/pageselector.cpp" line="263"/>
<location filename="../../scribus/pageselector.cpp" line="266"/>
<source>%1 of %2</source>
<translation>%1 的 %2</translation>
</message>
18549,6 → 21105,72
</message>
</context>
<context>
<name>PathConnectDialogBase</name>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="13"/>
<source>Connect Paths</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="19"/>
<source>Connect first Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="48"/>
<source>Starting Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="53"/>
<source>End Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="40"/>
<source>with second Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="61"/>
<source>with:</source>
<translation type="unfinished">用:</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="69"/>
<source>a straight Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="74"/>
<source>Points moving</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnectdialogbase.ui" line="82"/>
<source>Preview on Canvas</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PathConnectPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnect.cpp" line="90"/>
<source>Connect Paths</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnect.cpp" line="69"/>
<source>Path Tools</source>
<translation type="unfinished">路徑工具</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathconnect/pathconnect.cpp" line="91"/>
<source>Connect 2 Polylines.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PathCutPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/pathcut/pathcut.cpp" line="70"/>
18673,17 → 21295,17
<context>
<name>PathFinderBase</name>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="341"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="357"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="94"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="97"/>
<source>+</source>
<translation>+</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="186"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="195"/>
<source>=</source>
<translation>=</translation>
</message>
18693,22 → 21315,22
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="417"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="427"/>
<source>first Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="152"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="161"/>
<source>keep</source>
<translation>保持</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="149"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="158"/>
<source>Keep a copy of the original Item after applying the operation</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="265"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="274"/>
<source>Operation</source>
<translation>運算</translation>
</message>
18715,33 → 21337,114
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="386"/>
<source>Options</source>
<translation>選項</translation>
<translation type="obsolete">選項</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="407"/>
<source>Result gets Color of:</source>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="440"/>
<source>second Shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="427"/>
<source>second Shape</source>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="381"/>
<source>Swap Shapes</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="362"/>
<source>Swap Shapes</source>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="41"/>
<source>First source shape.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="139"/>
<source>Second source shape.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="234"/>
<source>The resulting shape.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="286"/>
<source>Unites the shapes</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="305"/>
<source>Substrats the second shape from the first shape</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="321"/>
<source>Intersection of the shapes</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="337"/>
<source>Result is the area where the two shapes do not intersect</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="353"/>
<source>Break apart,
The result is a combination of &quot;Intersection&quot; and &quot;Exclusion&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="378"/>
<source>Exchange the source shapes.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="418"/>
<source>Result gets Color from:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="437"/>
<source>The resulting shape gets the color of the first source shape.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="447"/>
<source>The resulting shape gets the colors listed below.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="450"/>
<source>Custom Colors</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="462"/>
<source>Stroke:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="478"/>
<source>Select stroke color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="488"/>
<source>Fill:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderbase.ui" line="498"/>
<source>Select fill color.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PathFinderDialog</name>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderdialog.cpp" line="115"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderdialog.cpp" line="127"/>
<source>Intersection gets Color of:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderdialog.cpp" line="91"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinderdialog.cpp" line="103"/>
<source>Result gets Color of:</source>
<translation type="unfinished"></translation>
</message>
18749,32 → 21452,32
<context>
<name>PathFinderPlugin</name>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="101"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="104"/>
<source>Apply fancy boolean operations to paths.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="100"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="103"/>
<source>Path Operations</source>
<translation>路徑運算</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="71"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="74"/>
<source>Path Operations...</source>
<translation>路徑運算...</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="75"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="78"/>
<source>Path Tools</source>
<translation>路徑工具</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="120"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="123"/>
<source>Qt Version too old</source>
<translation>Qt 的版本太舊了</translation>
</message>
<message>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="120"/>
<location filename="../../scribus/plugins/tools/pathfinder/pathfinder.cpp" line="123"/>
<source>This plugin requires at least version 4.3.3 of the Qt library</source>
<translation>這個外掛需要版本至少為 4.3.3 的 Qt 函式庫</translation>
</message>
19056,12 → 21759,12
<translation type="obsolete">有效的 DPI:</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="279"/>
<location filename="../../scribus/picstatus.cpp" line="299"/>
<source>emb. PSD</source>
<translation>emb. PSD</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="267"/>
<location filename="../../scribus/picstatus.cpp" line="287"/>
<source>EPS/PS</source>
<translation>EPS/PS</translation>
</message>
19111,12 → 21814,12
<translation>資訊</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="258"/>
<location filename="../../scribus/picstatus.cpp" line="278"/>
<source>JPG</source>
<translation>JPG</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="273"/>
<location filename="../../scribus/picstatus.cpp" line="293"/>
<source>JPG2000</source>
<translation>JPG2000</translation>
</message>
19141,7 → 21844,7
<translation type="obsolete">遺失</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="303"/>
<location filename="../../scribus/picstatus.cpp" line="322"/>
<source>n/a</source>
<translation>n/a</translation>
</message>
19156,12 → 21859,12
<translation>名稱:</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="403"/>
<location filename="../../scribus/picstatus.cpp" line="422"/>
<source>No images named &quot;%1&quot; were found.</source>
<translation>找不到叫做 &quot;%1&quot; 的圖片。</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="243"/>
<location filename="../../scribus/picstatus.cpp" line="253"/>
<source>Not on a Page</source>
<translation>不是一個頁面</translation>
</message>
19196,7 → 21899,7
<translation>路徑:</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="270"/>
<location filename="../../scribus/picstatus.cpp" line="290"/>
<source>PDF</source>
<translation>PDF</translation>
</message>
19221,7 → 21924,7
<translation>已列印:</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="264"/>
<location filename="../../scribus/picstatus.cpp" line="284"/>
<source>PSD</source>
<translation>PSD</translation>
</message>
19231,7 → 21934,7
<translation>縮放:</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="403"/>
<location filename="../../scribus/picstatus.cpp" line="422"/>
<source>Scribus - Image Search</source>
<translation>Scribus - 圖像尋找</translation>
</message>
19261,12 → 21964,12
<translation></translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="218"/>
<location filename="../../scribus/picstatus.cpp" line="228"/>
<source>Sort by Name</source>
<translation>按名稱排序</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="220"/>
<location filename="../../scribus/picstatus.cpp" line="230"/>
<source>Sort by Page</source>
<translation>按頁面排序</translation>
</message>
19281,12 → 21984,12
<translation type="obsolete">尋找失敗: %1</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="261"/>
<location filename="../../scribus/picstatus.cpp" line="281"/>
<source>TIFF</source>
<translation>TIFF</translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="285"/>
<location filename="../../scribus/picstatus.cpp" line="305"/>
<source>Unknown</source>
<translation>未知</translation>
</message>
19410,29 → 22113,49
<source>Apply non destructive effects to the image in its frame</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/picstatus.cpp" line="264"/>
<source>Embedded Image</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PixmapExportPlugin</name>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="79"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="78"/>
<source>Export As Image</source>
<translation>匯出成圖片</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="130"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="145"/>
<source>Export successful</source>
<translation>輸出成功</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="80"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="79"/>
<source>Exports selected pages as bitmap images.</source>
<translation>把選中的頁面匯出爲點陣圖。</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="60"/>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="59"/>
<source>Save as &amp;Image...</source>
<translation>另存為圖片 (&amp;I)...</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="123"/>
<source>Save as Image</source>
<translation type="unfinished">另存爲圖片</translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="118"/>
<source>The target location %1 must be an existing directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/plugins/pixmapexport/export.cpp" line="124"/>
<source>The target location %1 must be writable</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PluginManager</name>
19573,55 → 22296,118
<message>
<location filename="../../scribus/polygonwidget.cpp" line="106"/>
<source> %</source>
<translation> %</translation>
<translation type="obsolete"> %</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="146"/>
<source>A negative value will make the polygon concave (or star shaped), a positive value will make it convex</source>
<translation>負數值將會使多邊形變爲凹形 (或者星形), 正數值將使它成爲凸形</translation>
<translation type="obsolete">負數值將會使多邊形變爲凹形 (或者星形), 正數值將使它成爲凸形</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="143"/>
<source>Apply Convex/Concave Factor to change shape of Polygons</source>
<translation>套用凹凸大小來改變多邊形的形狀</translation>
<translation type="obsolete">套用凹凸大小來改變多邊形的形狀</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="91"/>
<source>Apply &amp;Factor</source>
<translation>套用因式 (&amp;F)</translation>
<translation type="obsolete">套用因式 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="55"/>
<source>Corn&amp;ers:</source>
<translation>角數 (&amp;E):</translation>
<translation type="obsolete">角數 (&amp;E):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="142"/>
<source>Degrees of rotation for polygons</source>
<translation>多邊形的旋轉角度</translation>
<translation type="obsolete">多邊形的旋轉角度</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="110"/>
<source>&amp;Factor:</source>
<translation>因式 (&amp;F):</translation>
<translation type="obsolete">因式 (&amp;F):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="140"/>
<source>Number of corners for polygons</source>
<translation>多邊形的角數</translation>
<translation type="obsolete">多邊形的角數</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="75"/>
<source>&amp;Rotation:</source>
<translation>旋轉 (&amp;R):</translation>
<translation type="obsolete">旋轉 (&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidget.cpp" line="144"/>
<source>Sample Polygon</source>
<translation>多邊形樣本</translation>
<translation type="obsolete">多邊形樣本</translation>
</message>
</context>
<context>
<name>PolygonWidgetBase</name>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="19"/>
<source>Form</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="30"/>
<source>Corn&amp;ers:</source>
<translation type="unfinished">角數 (&amp;E):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="40"/>
<source>Number of corners for polygons</source>
<translation type="unfinished">多邊形的角數</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="53"/>
<source>&amp;Rotation:</source>
<translation type="unfinished">旋轉 (&amp;R):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="76"/>
<source>Degrees of rotation for polygons</source>
<translation type="unfinished">多邊形的旋轉角度</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="121"/>
<source>Sample Polygon</source>
<translation type="unfinished">多邊形樣本</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="143"/>
<source>Apply Convex/Concave Factor to change shape of Polygons</source>
<translation type="unfinished">套用凹凸大小來改變多邊形的形狀</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="146"/>
<source>Apply &amp;Factor</source>
<translation type="unfinished">套用因式 (&amp;F)</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="161"/>
<source>&amp;Factor:</source>
<translation type="unfinished">因式 (&amp;F):</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="187"/>
<source>A negative value will make the polygon concave (or star shaped), a positive value will make it convex</source>
<translation type="unfinished">負數值將會使多邊形變爲凹形 (或者星形), 正數值將使它成爲凸形</translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="216"/>
<source> %</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/polygonwidgetbase.ui" line="206"/>
<source>C&amp;urvature:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Preferences</name>
<message>
<location filename="" line="7471221"/>
20355,7 → 23141,7
<translation type="obsolete">4折</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="1678"/>
<location filename="../../scribus/prefsmanager.cpp" line="1682"/>
<source>Could not open preferences file &quot;%1&quot; for writing: %2</source>
<translation>不能打開偏好設定文件 &quot;%1&quot; 來寫入: %2</translation>
</message>
20365,22 → 23151,22
<translation type="obsolete">雙頁</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2399"/>
<location filename="../../scribus/prefsmanager.cpp" line="2405"/>
<source>Error Loading Preferences</source>
<translation>載入設定時出錯</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2380"/>
<location filename="../../scribus/prefsmanager.cpp" line="2386"/>
<source>Error Writing Preferences</source>
<translation>寫入偏好設定錯誤</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="1704"/>
<location filename="../../scribus/prefsmanager.cpp" line="1708"/>
<source>Failed to open prefs file &quot;%1&quot;: %2</source>
<translation>開啟偏好檔案 &quot;%1&quot; 失敗: %2</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="1714"/>
<location filename="../../scribus/prefsmanager.cpp" line="1718"/>
<source>Failed to read prefs XML from &quot;%1&quot;: %2 at line %3, col %4</source>
<translation type="unfinished">Failed to read prefs XML from &quot;%1&quot;: %2 at line %3, col %4</translation>
</message>
20405,7 → 23191,7
<translation type="obsolete">中右</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="806"/>
<location filename="../../scribus/prefsmanager.cpp" line="808"/>
<source>Migrate Old Scribus Settings?</source>
<translation>搬移舊的 Scribus 設定?</translation>
</message>
20425,12 → 23211,12
<translation type="obsolete">PDF/X-3</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2046"/>
<location filename="../../scribus/prefsmanager.cpp" line="2052"/>
<source>Postscript</source>
<translation>Postscript</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2046"/>
<location filename="../../scribus/prefsmanager.cpp" line="2052"/>
<source>PostScript</source>
<translation>PostScript</translation>
</message>
20440,7 → 23226,7
<translation type="obsolete">右頁</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="808"/>
<location filename="../../scribus/prefsmanager.cpp" line="810"/>
<source>Scribus has detected existing Scribus 1.2 preferences files.
Do you want to migrate them to the new Scribus version?</source>
<translation>Scribus 偵測到現存的 Scribus 1.2 設定檔案。
20447,12 → 23233,12
你想要搬移他們到新的 Scribus 版本中嗎?</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2404"/>
<location filename="../../scribus/prefsmanager.cpp" line="2410"/>
<source>Scribus was not able to load its preferences:&lt;br&gt;%1&lt;br&gt;Default settings will be loaded.</source>
<translation>Scribus 無法載入偏好設定: &lt;br&gt;%1&lt;br&gt; 將載入預設設置。</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="2386"/>
<location filename="../../scribus/prefsmanager.cpp" line="2392"/>
<source>Scribus was not able to save its preferences:&lt;br&gt;%1&lt;br&gt;Please check file and directory permissions and available disk space.</source>
<comment>scribus app error</comment>
<translation>Scribus 無法儲存其偏好設定:&lt;br&gt;%1&lt;br&gt;請檢查檔案和目錄的權限和可用的磁碟空間。</translation>
20463,7 → 23249,7
<translation type="obsolete">單頁</translation>
</message>
<message>
<location filename="../../scribus/prefsmanager.cpp" line="1690"/>
<location filename="../../scribus/prefsmanager.cpp" line="1694"/>
<source>Writing to preferences file &quot;%1&quot; failed: QIODevice status code %2</source>
<translation>寫入 &quot;%1&quot; 失敗: QIODevice 狀態代碼 %2</translation>
</message>
20702,7 → 23488,7
<message>
<location filename="../../scribus/printdialog.cpp" line="359"/>
<source>Save as</source>
<translation>另存新檔</translation>
<translation type="obsolete">另存新檔</translation>
</message>
<message>
<location filename="../printdialog.cpp" line="208"/>
20736,6 → 23522,11
<source>Yellow</source>
<translation>黃</translation>
</message>
<message>
<location filename="../../scribus/printdialog.cpp" line="359"/>
<source>Save As</source>
<translation type="unfinished">另存新檔</translation>
</message>
</context>
<context>
<name>PrintDialogBase</name>
20742,7 → 23533,7
<message>
<location filename="../../scribus/printdialogbase.ui" line="386"/>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks.</source>
<translation type="unfinished">A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks.</translation>
<translation type="obsolete">A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks.</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="472"/>
20807,7 → 23598,7
<message>
<location filename="../../scribus/printdialogbase.ui" line="370"/>
<source>Clip to Page Margins</source>
<translation>裁切到頁邊</translation>
<translation type="obsolete">裁切到頁邊</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="380"/>
20837,22 → 23628,22
<message>
<location filename="../../scribus/printdialogbase.ui" line="555"/>
<source>Distance for bleed from the bottom of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the bottom of the physical page</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="569"/>
<source>Distance for bleed from the left of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the left of the physical page</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="541"/>
<source>Distance for bleed from the right of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the right of the physical page</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="527"/>
<source>Distance for bleed from the top of the physical page</source>
<translation type="unfinished"></translation>
<translation type="unfinished">Distance for bleed from the top of the physical page</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="396"/>
21016,7 → 23807,7
<message>
<location filename="../../scribus/printdialogbase.ui" line="360"/>
<source>This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer.</source>
<translation type="unfinished">This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer.</translation>
<translation type="obsolete">This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer.</translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="520"/>
21049,41 → 23840,56
<source>Include PDF Annotations and Links</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="360"/>
<source>This enables you to explicitly set the media size of the PostScript file. Not recommended unless requested by your printer.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="370"/>
<source>Clip to Printer Margins</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/printdialogbase.ui" line="386"/>
<source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PropertiesPalette</name>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5000"/>
<location filename="../../scribus/propertiespalette.cpp" line="5003"/>
<source> %</source>
<translation> %</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5014"/>
<location filename="../../scribus/propertiespalette.cpp" line="5017"/>
<source> pt</source>
<translation> pt</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4948"/>
<location filename="../../scribus/propertiespalette.cpp" line="4951"/>
<source>Absolute Colorimetric</source>
<translation type="unfinished">絕對比色</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4924"/>
<location filename="../../scribus/propertiespalette.cpp" line="4927"/>
<source>Actual X-DPI:</source>
<translation>實際 X-DPI:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4925"/>
<location filename="../../scribus/propertiespalette.cpp" line="4928"/>
<source>Actual Y-DPI:</source>
<translation>實際 Y-DPI:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4942"/>
<location filename="../../scribus/propertiespalette.cpp" line="4945"/>
<source>Align to Baseline Grid</source>
<translation>和基線網格對齊</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5220"/>
<location filename="../../scribus/propertiespalette.cpp" line="5223"/>
<source>Allow the image to be a different size to the frame</source>
<translation type="unfinished">Allow the image to be a different size to the frame</translation>
</message>
21093,252 → 23899,252
<translation>自動</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4941"/>
<location filename="../../scribus/propertiespalette.cpp" line="4944"/>
<source>Automatic Linespacing</source>
<translation>自動行距</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4832"/>
<location filename="../../scribus/propertiespalette.cpp" line="4834"/>
<source>Basepoint:</source>
<translation>基點:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4960"/>
<location filename="../../scribus/propertiespalette.cpp" line="4963"/>
<source>&amp;Basepoint:</source>
<translation>基點 (&amp;B):</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4978"/>
<location filename="../../scribus/propertiespalette.cpp" line="4981"/>
<source>Bevel Join</source>
<translation>斜角連接</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4842"/>
<location filename="../../scribus/propertiespalette.cpp" line="4844"/>
<source>Blend Mode:</source>
<translation>混合模式:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4869"/>
<location filename="../../scribus/propertiespalette.cpp" line="4871"/>
<source>&amp;Bottom:</source>
<translation>底部 (&amp;B):</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4990"/>
<location filename="../../scribus/propertiespalette.cpp" line="4993"/>
<source>Cell Lines</source>
<translation type="unfinished">Cell Lines</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5201"/>
<location filename="../../scribus/propertiespalette.cpp" line="5204"/>
<source>Change settings for left or end points</source>
<translation>更改左或尾點的設置</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5186"/>
<location filename="../../scribus/propertiespalette.cpp" line="5189"/>
<source>Character style of currently selected text or paragraph</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4899"/>
<location filename="../../scribus/propertiespalette.cpp" line="4901"/>
<source>Character St&amp;yle:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5208"/>
<location filename="../../scribus/propertiespalette.cpp" line="5211"/>
<source>Choose the shape of frame...</source>
<translation>選擇框體的形狀...</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4858"/>
<location filename="../../scribus/propertiespalette.cpp" line="4860"/>
<source>Color</source>
<translation>顔色</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4855"/>
<location filename="../../scribus/propertiespalette.cpp" line="4857"/>
<source>Color Burn</source>
<translation type="unfinished">顔色焦灼</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4854"/>
<location filename="../../scribus/propertiespalette.cpp" line="4856"/>
<source>Color Dodge</source>
<translation type="unfinished">顔色模糊</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5177"/>
<location filename="../../scribus/propertiespalette.cpp" line="5180"/>
<source>Color of selected text. If Outline text decoration is enabled, this color will be the fill color. If Drop Shadow Text is enabled, then this will be the top most color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5176"/>
<location filename="../../scribus/propertiespalette.cpp" line="5179"/>
<source>Color of text stroke and/or drop shadow, depending which is chosen.If both are chosen, then they share the same color.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4822"/>
<location filename="../../scribus/propertiespalette.cpp" line="4824"/>
<source>&amp;Colors</source>
<translation>顔色 (&amp;C)</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="3558"/>
<location filename="../../scribus/propertiespalette.cpp" line="3560"/>
<source>Column width</source>
<translation>列寬</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4861"/>
<location filename="../../scribus/propertiespalette.cpp" line="4863"/>
<source>Colu&amp;mns:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4953"/>
<location filename="../../scribus/propertiespalette.cpp" line="4956"/>
<source>Custom</source>
<translation>自定</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4845"/>
<location filename="../../scribus/propertiespalette.cpp" line="4847"/>
<source>Darken</source>
<translation>更暗</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4875"/>
<location filename="../../scribus/propertiespalette.cpp" line="4877"/>
<source>Default</source>
<translation type="unfinished">預設 </translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4852"/>
<location filename="../../scribus/propertiespalette.cpp" line="4854"/>
<source>Difference</source>
<translation type="unfinished">差分</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5165"/>
<location filename="../../scribus/propertiespalette.cpp" line="5168"/>
<source>Disable text flow from lower frames around object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4893"/>
<location filename="../../scribus/propertiespalette.cpp" line="4895"/>
<source>Disabled</source>
<translation>已禁用</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5213"/>
<location filename="../../scribus/propertiespalette.cpp" line="5216"/>
<source>Distance between columns</source>
<translation>列間距</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4882"/>
<location filename="../../scribus/propertiespalette.cpp" line="4884"/>
<source>Distance from Curve:</source>
<translation>到曲線的距離:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4921"/>
<location filename="../../scribus/propertiespalette.cpp" line="4923"/>
<source>Distance of Text</source>
<translation>文字距離</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5215"/>
<location filename="../../scribus/propertiespalette.cpp" line="5218"/>
<source>Distance of text from bottom of frame</source>
<translation type="unfinished">文字和框體底部的距離</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5216"/>
<location filename="../../scribus/propertiespalette.cpp" line="5219"/>
<source>Distance of text from left of frame</source>
<translation type="unfinished">文字和框體左邊的距離</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5217"/>
<location filename="../../scribus/propertiespalette.cpp" line="5220"/>
<source>Distance of text from right of frame</source>
<translation type="unfinished">文字和框體右邊的距離</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5214"/>
<location filename="../../scribus/propertiespalette.cpp" line="5217"/>
<source>Distance of text from top of frame</source>
<translation type="unfinished">文字和框體頂部的距離</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4974"/>
<location filename="../../scribus/propertiespalette.cpp" line="4977"/>
<source>Ed&amp;ges:</source>
<translation>邊緣 (&amp;G):</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5209"/>
<location filename="../../scribus/propertiespalette.cpp" line="5212"/>
<source>Edit shape of the frame...</source>
<translation type="unfinished">編輯框體的形狀...</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5218"/>
<location filename="../../scribus/propertiespalette.cpp" line="5221"/>
<source>Edit tab settings of text frame...</source>
<translation type="unfinished">Edit tab settings of text frame...</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4838"/>
<location filename="../../scribus/propertiespalette.cpp" line="4840"/>
<source>&amp;Edit...</source>
<translation>編輯 (&amp;E)...</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5158"/>
<location filename="../../scribus/propertiespalette.cpp" line="5161"/>
<source>Enable or disable exporting of the object</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4963"/>
<location filename="../../scribus/propertiespalette.cpp" line="4966"/>
<source>End Arrow:</source>
<translation>箭尾:</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4958"/>
<location filename="../../scribus/propertiespalette.cpp" line="4961"/>
<source>End Points</source>
<translation>尾點</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4988"/>
<location filename="../../scribus/propertiespalette.cpp" line="4991"/>
<source>&amp;Endings:</source>
<translation>結尾 (&amp;E):</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4884"/>
<location filename="../../scribus/propertiespalette.cpp" line="4886"/>
<source>Even-Odd</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4853"/>
<location filename="../../scribus/propertiespalette.cpp" line="4855"/>
<source>Exclusion</source>
<translation>排除</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4933"/>
<location filename="../../scribus/propertiespalette.cpp" line="4936"/>
<source>Extended Image Properties</source>
<translation>圖片延伸屬性</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4883"/>
<location filename="../../scribus/propertiespalette.cpp" line="4885"/>
<source>Fill Rule</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4920"/>
<location filename="../../scribus/propertiespalette.cpp" line="4922"/>
<source>First Line Offset</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4940"/>
<location filename="../../scribus/propertiespalette.cpp" line="4943"/>
<source>Fixed Linespacing</source>
<translation>固定行距</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4984"/>
<location filename="../../scribus/propertiespalette.cpp" line="4987"/>
<source>Flat Cap</source>
<translation>平頭</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5149"/>
<location filename="../../scribus/propertiespalette.cpp" line="5152"/>
<source>Flip Horizontal</source>
<translation>水平翻轉</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="4878"/>
<location filename="../../scribus/propertiespalette.cpp" line="4880"/>
<source>Flip Text</source>
<translation>翻轉文字</translation>
</message>
<message>
<location filename="../../scribus/propertiespalette.cpp" line="5150"/>
<location filename="../../scribus/propertiespalette.cpp" line="5153"/>
<source>Flip Vertical</source>
<translation>垂直翻轉</translation>
</message>
213