Subversion Repositories Scribus

Rev

Rev 14480 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0">
<context>
    <name></name>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="17"/>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="unfinished">
      getColorNames() -&gt; list

      返回文档中所有预设的颜色名称的列表
      
      </translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="27"/>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="41"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="56"/>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">changeColour(&quot;name&quot;, c, m, y, k)

Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="70"/>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="83"/>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.

deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="100"/>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.

May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="113"/>
        <source>isSpotColor(&quot;name&quot;) -&gt; bool

Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdcolor.h" line="128"/>
        <source>setSpotColor(&quot;name&quot;, spot)

Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="17"/>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="unfinished">
      newDocDialog() -&gt; bool

      显示 &quot;新建文档&quot; 对话窗口。如果用户接受了设定,一个新文挡将被创建。如果用户按取消键,文档将不被创建。如果信文档被创建,返回真。
      </translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="28"/>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="56"/>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="unfinished">messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="95"/>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="unfinished">valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddialog.h" line="107"/>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="unfinished">newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="16"/>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="62"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="unfinished">newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="103"/>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="unfinished">closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="114"/>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="unfinished">haveDoc() -&gt; bool

Returns true if there is a document open.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="123"/>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="unfinished">openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="134"/>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="unfinished">saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="146"/>
        <source>getDocName() -&gt; string

Returns the name the document was saved under.
If the document was not saved before the name is empty.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="156"/>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="unfinished">saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="168"/>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="178"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="unfinished">setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="189"/>
        <source>setBaseLine(grid, offset)

Sets the base line settings of the document, grid spacing(grid), grid offset(offset).
Values are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="200"/>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="unfinished">setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="212"/>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="unfinished">getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="223"/>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="unfinished">loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="unfinished">setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="243"/>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="unfinished">closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="251"/>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="unfinished">masterPageNames()

Returns a list of the names of all master pages in the document.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="258"/>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="unfinished">editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="266"/>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="unfinished">createMasterPage(pageName)

生成一个叫 pageName 的新母页,并且打开它来编辑
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmddoc.h" line="274"/>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="unfinished">deleteMasterPage(pageName)

删除命名的母页
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="17"/>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="27"/>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="37"/>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="47"/>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="57"/>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="67"/>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="77"/>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished">getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="87"/>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="97"/>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="108"/>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="unfinished">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="119"/>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="unfinished">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="130"/>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="140"/>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="151"/>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="161"/>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished">getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="171"/>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="183"/>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="unfinished">getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="195"/>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="unfinished">getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetprop.h" line="206"/>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="unfinished">getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="77"/>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="unfinished">getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="96"/>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="unfinished">getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="123"/>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="unfinished">getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="158"/>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="unfinished">setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="17"/>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="29"/>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished">moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="41"/>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="54"/>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="65"/>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished">sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="75"/>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="unfinished">getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="86"/>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="unfinished">selectionCount() -&gt; integer

Returns the number of selected objects.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="95"/>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="unfinished">selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="104"/>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="unfinished">deselectAll()

Deselects all objects in the whole document.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="113"/>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="unfinished">groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="124"/>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="unfinished">unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="132"/>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="unfinished">scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="147"/>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished">loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="159"/>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on 
properties palette. Note : deprecated, use setImageScale() instead.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="173"/>
        <source>setImageScale(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="186"/>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="unfinished">lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="197"/>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished">isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmani.h" line="206"/>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="unfinished">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="19"/>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="30"/>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="unfinished">getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="39"/>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="unfinished">getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="52"/>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="unfinished">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="68"/>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="unfinished">getLayers() -&gt; list

Returns a list with the names of all defined layers.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="77"/>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="89"/>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="unfinished">getActiveLayer() -&gt; string

Returns the name of the current active layer.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="98"/>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="111"/>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="124"/>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="137"/>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="150"/>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="163"/>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="176"/>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="188"/>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="200"/>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="214"/>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="228"/>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="242"/>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="256"/>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="269"/>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="281"/>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="293"/>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="306"/>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="317"/>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="unfinished">getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="326"/>
        <source>moveSelectionToFront()

Moves current selection to front.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdmisc.h" line="335"/>
        <source>moveSelectionToFront()

Moves current selection to back.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="17"/>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="34"/>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="51"/>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="66"/>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="81"/>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="96"/>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished">createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="114"/>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished">createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="134"/>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished">createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="155"/>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="unfinished">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="173"/>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="unfinished">deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="184"/>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="206"/>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="unfinished">objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="223"/>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If object name is
given, style is applied to the current text selection in object &quot;name&quot;.
If no object name is given, style is applied on selected object.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="250"/>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdobj.h" line="238"/>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="unfinished">getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="17"/>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="32"/>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="unfinished">currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="42"/>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="unfinished">redrawAll()

Redraws all pages.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="51"/>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="60"/>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="unfinished">savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="71"/>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished">deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="84"/>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="97"/>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="unfinished">pageCount() -&gt; integer

Returns the number of pages in the document.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="106"/>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="unfinished">getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="116"/>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="unfinished">setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="129"/>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="unfinished">getVGuides()

See getHGuides.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="138"/>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="unfinished">setVGuides()

See setHGuides.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="147"/>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="unfinished">getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="161"/>
        <source>getPageNSize() -&gt; tuple

Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="174"/>
        <source>getPageNMargins() -&gt; tuple

Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="187"/>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="unfinished">getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="203"/>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="unfinished">getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdpage.h" line="216"/>
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="17"/>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="28"/>
        <source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])

Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="39"/>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished">setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="50"/>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="60"/>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="70"/>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished">setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="80"/>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="90"/>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="100"/>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="unfinished">setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="113"/>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="unfinished">setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="127"/>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="unfinished">setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="138"/>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="unfinished">setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="149"/>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="unfinished">setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="160"/>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="unfinished">setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="174"/>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="unfinished">setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdsetprop.h" line="186"/>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="unfinished">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="17"/>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="29"/>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="41"/>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="51"/>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="61"/>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="73"/>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished">getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="85"/>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="95"/>
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple

Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="106"/>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="116"/>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished">getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="126"/>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished">setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="138"/>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="152"/>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="unfinished">setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="165"/>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="unfinished">setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="179"/>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="unfinished">setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="192"/>
        <source>setLineSpacingMode(mode, [&quot;name&quot;])

Sets the line spacing mode of the text frame &quot;name&quot; to &quot;mode&quot;.
If &quot;name&quot; is not given the currently selected
item is used.
Mode values are the same as in createParagraphStyle.

May throw ValueError if the mode is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="206"/>
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])

Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.

May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="219"/>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="unfinished">setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="231"/>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="unfinished">setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="243"/>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="unfinished">setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="256"/>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="unfinished">selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="270"/>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="281"/>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished">setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="292"/>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="302"/>
        <source>setTextScalingV(scale, [&quot;name&quot;])

Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="312"/>
        <source>setTextScalingH(scale, [&quot;name&quot;])

Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="322"/>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished">setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="335"/>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished">unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="369"/>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="unfinished">traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="380"/>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="unfinished">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="393"/>
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="407"/>
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="422"/>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdtext.h" line="434"/>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished">isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="17"/>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="30"/>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="unfinished">progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="43"/>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="unfinished">progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="52"/>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="unfinished">progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="66"/>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="unfinished">setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="78"/>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="unfinished">docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="91"/>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="unfinished">zoomDocument(double)

在主图形界面窗口缩放文件。动作包括整数值如20.0,100.0,等待。缩放以-100作为记号。
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/guiapp.h" line="103"/>
        <source>scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdstyle.h" line="22"/>
        <source>createParagraphStyle(...)

Creates a paragraph style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create

linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:

fixed linespacing:          0

automatic linespacing:      1

baseline grid linespacing:  2

linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing

alignment [optional] -&gt; specifies the alignment of the paragraph

-&gt; left:     0

-&gt; center:   1

-&gt; right:    2

-&gt; justify:  3

-&gt; extend:   4

leftmargin [optional], rightmargin [optional] -&gt; specify the margin

gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs

firstindent [optional] -&gt; the indent of the first line

hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)

dropcaplines [optional] -&gt; height (in lines) of the caps if used

dropcapoffset [optional] -&gt; offset of the caps if used

&quot;charstyle&quot; [optional] -&gt; char style to use

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/cmdstyle.h" line="52"/>
        <source>createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline

-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="15"/>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="27"/>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="39"/>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/scriptplugin/svgimport.h" line="51"/>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>@default</name>
    <message>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="obsolete">
      getColorNames() -&gt; list

      返回文档中所有预设的颜色名称的列表
      
      </translation>
    </message>
    <message>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="obsolete">
      newDocDialog() -&gt; bool

      显示 &quot;新建文档&quot; 对话窗口。如果用户接受了设定,一个新文挡将被创建。如果用户按取消键,文档将不被创建。如果信文档被创建,返回真。
      </translation>
    </message>
    <message>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four colour components of the
colour &quot;name&quot; from the current document. If no document is open, returns
the value of the named colour from the default document colours.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three colour components of the
colour &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named colour
from the default document colours.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">changeColour(&quot;name&quot;, c, m, y, k)

Changes the colour &quot;name&quot; to the specified CMYK value. The colour value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Colour components should be in the range from 0 to 255.

May raise NotFoundError if the named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yello and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)

Defines a new colour &quot;name&quot;. The colour Value is defined via four components:
c = Cyan, m = Magenta, y = Yello and k = Black. Colour components should be in
the range from 0 to 255.

May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the colour &quot;name&quot;. Every occurence of that colour is replaced by the
colour &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the colour
&quot;None&quot; - transparent.

deleteColor works on the default document colours if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the colour &quot;name&quot; is replaced by the colour &quot;replace&quot;.

May raise NotFoundError if a named colour wasn&apos;t found.
May raise ValueError if an invalid colour name is specified.
</translation>
    </message>
    <message>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
    </message>
    <message>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</translation>
    </message>
    <message>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</translation>
    </message>
    <message>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="obsolete">closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</translation>
    </message>
    <message>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="obsolete">haveDoc() -&gt; bool

Returns true if there is a document open.
</translation>
    </message>
    <message>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="obsolete">openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</translation>
    </message>
    <message>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="obsolete">saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</translation>
    </message>
    <message>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="obsolete">saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</translation>
    </message>
    <message>
        <source>saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="obsolete">saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</translation>
    </message>
    <message>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</translation>
    </message>
    <message>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="obsolete">setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</translation>
    </message>
    <message>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</translation>
    </message>
    <message>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</translation>
    </message>
    <message>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="obsolete">setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</translation>
    </message>
    <message>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</translation>
    </message>
    <message>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</translation>
    </message>
    <message>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</translation>
    </message>
    <message>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
    </message>
    <message>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill colour of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius isexpressed in points. If &quot;name&quot; is not given the currentlyselected item is used.
</source>
        <translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius isexpressed in points. If &quot;name&quot; is not given the currentlyselected item is used.
</translation>
    </message>
    <message>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</translation>
    </message>
    <message>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</translation>
    </message>
    <message>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</translation>
    </message>
    <message>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="obsolete">getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</translation>
    </message>
    <message>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="obsolete">getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</translation>
    </message>
    <message>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="obsolete">getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</translation>
    </message>
    <message>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="obsolete">getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</translation>
    </message>
    <message>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="obsolete">setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</translation>
    </message>
    <message>
        <source>getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.
</source>
        <translation type="obsolete">getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.
</translation>
    </message>
    <message>
        <source>getChild(object, childname, ofclass=None, recursive=True)

Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</source>
        <translation type="obsolete">getChild(object, childname, ofclass=None, recursive=True)

Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</translation>
    </message>
    <message>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</translation>
    </message>
    <message>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positve values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positve values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="obsolete">getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</translation>
    </message>
    <message>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="obsolete">selectionCount() -&gt; integer

Returns the number of selected objects.
</translation>
    </message>
    <message>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="obsolete">selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</translation>
    </message>
    <message>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="obsolete">deselectAll()

Deselects all objects in the whole document.
</translation>
    </message>
    <message>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="obsolete">groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</translation>
    </message>
    <message>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="obsolete">unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</translation>
    </message>
    <message>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
    </message>
    <message>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</translation>
    </message>
    <message>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</translation>
    </message>
    <message>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</translation>
    </message>
    <message>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</translation>
    </message>
    <message>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="obsolete">getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</translation>
    </message>
    <message>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="obsolete">getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</translation>
    </message>
    <message>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</translation>
    </message>
    <message>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="obsolete">getLayers() -&gt; list

Returns a list with the names of all defined layers.
</translation>
    </message>
    <message>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="obsolete">getActiveLayer() -&gt; string

Returns the name of the current active layer.
</translation>
    </message>
    <message>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the printable set to
false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the printable set to
false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</translation>
    </message>
    <message>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="obsolete">getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</translation>
    </message>
    <message>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</translation>
    </message>
    <message>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</translation>
    </message>
    <message>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</translation>
    </message>
    <message>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="obsolete">deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</translation>
    </message>
    <message>
        <source>textFlowsAroundFrame(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional boolean &quot;state&quot;. If &quot;state&quot;
is not passed, text flow is toggled.
</source>
        <translation type="obsolete">textFlowsAroundFrame(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional boolean &quot;state&quot;. If &quot;state&quot;
is not passed, text flow is toggled.
</translation>
    </message>
    <message>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</translation>
    </message>
    <message>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</translation>
    </message>
    <message>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="obsolete">getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</translation>
    </message>
    <message>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="obsolete">currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</translation>
    </message>
    <message>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="obsolete">redrawAll()

Redraws all pages.
</translation>
    </message>
    <message>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="obsolete">savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</translation>
    </message>
    <message>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</translation>
    </message>
    <message>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="obsolete">gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</translation>
    </message>
    <message>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="obsolete">pageCount() -&gt; integer

Returns the number of pages in the document.
</translation>
    </message>
    <message>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="obsolete">getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</translation>
    </message>
    <message>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="obsolete">setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</translation>
    </message>
    <message>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="obsolete">getVGuides()

See getHGuides.
</translation>
    </message>
    <message>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="obsolete">setVGuides()

See setHGuides.
</translation>
    </message>
    <message>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="obsolete">getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</translation>
    </message>
    <message>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="obsolete">getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</translation>
    </message>
    <message>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="obsolete">getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</translation>
    </message>
    <message>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill colour of the object &quot;name&quot; to the colour &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colours. If &quot;name&quot; is not given the
currently selected item is used.
</translation>
    </message>
    <message>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line colour of the object &quot;name&quot; to the colour &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="obsolete">setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</translation>
    </message>
    <message>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="obsolete">setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full colour intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</translation>
    </message>
    <message>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="obsolete">setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</translation>
    </message>
    <message>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="obsolete">setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</translation>
    </message>
    <message>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="obsolete">setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</translation>
    </message>
    <message>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="obsolete">setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill colour of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Colour intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</translation>
    </message>
    <message>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</translation>
    </message>
    <message>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</translation>
    </message>
    <message>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</translation>
    </message>
    <message>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</translation>
    </message>
    <message>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="obsolete">setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</translation>
    </message>
    <message>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</translation>
    </message>
    <message>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="obsolete">setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</translation>
    </message>
    <message>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="obsolete">setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</translation>
    </message>
    <message>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</translation>
    </message>
    <message>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="obsolete">selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</translation>
    </message>
    <message>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text colour of the text frame &quot;name&quot; to the colour &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</translation>
    </message>
    <message>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</translation>
    </message>
    <message>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text colour of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full colour
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</translation>
    </message>
    <message>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</translation>
    </message>
    <message>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</translation>
    </message>
    <message>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="obsolete">traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="obsolete">textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</translation>
    </message>
    <message>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
    </message>
    <message>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</translation>
    </message>
    <message>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="obsolete">progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</translation>
    </message>
    <message>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="obsolete">progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</translation>
    </message>
    <message>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="obsolete">progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</translation>
    </message>
    <message>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="obsolete">setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</translation>
    </message>
    <message>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="obsolete">docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</translation>
    </message>
    <message>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="obsolete">newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</translation>
    </message>
    <message>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="obsolete">closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</translation>
    </message>
    <message>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="obsolete">masterPageNames()

Returns a list of the names of all master pages in the document.
</translation>
    </message>
    <message>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="obsolete">editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</translation>
    </message>
    <message>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="obsolete">createMasterPage(pageName)

生成一个叫 pageName 的新母页,并且打开它来编辑
</translation>
    </message>
    <message>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="obsolete">deleteMasterPage(pageName)

删除命名的母页
</translation>
    </message>
    <message>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="obsolete">zoomDocument(double)

在主图形界面窗口缩放文件。动作包括整数值如20.0,100.0,等待。缩放以-100作为记号。
</translation>
    </message>
    <message>
        <source>Copy #%1 of </source>
        <translation type="obsolete">Copy #%1 of</translation>
    </message>
</context>
<context>
    <name>AIPlug</name>
    <message>
        <location filename="../../../scribus/plugins/import/ai/importai.cpp" line="129"/>
        <source>Importing: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ai/importai.cpp" line="132"/>
        <source>Analyzing File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ai/importai.cpp" line="296"/>
        <source>Group%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ai/importai.cpp" line="2563"/>
        <source>Generating Items</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>About</name>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="305"/>
        <source>Contributions from:</source>
        <translation>贡献者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="188"/>
        <source>&amp;About</source>
        <translation>&amp;A 关于</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="201"/>
        <source>A&amp;uthors</source>
        <translation>&amp;U 作者</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="215"/>
        <source>&amp;Translations</source>
        <translation>&amp;T 翻译</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="226"/>
        <source>&amp;Online</source>
        <translation>&amp;O 在线资料</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="265"/>
        <source>&amp;Close</source>
        <translation>&amp;C 关闭</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="297"/>
        <source>Development Team:</source>
        <translation>开发团队</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="307"/>
        <source>Official Documentation:</source>
        <translation>官方文档:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="311"/>
        <source>Other Documentation:</source>
        <translation>其他文档:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="345"/>
        <source>Homepage</source>
        <translation>主页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="347"/>
        <source>Online Reference</source>
        <translation>在线参考</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="351"/>
        <source>Bugs and Feature Requests</source>
        <translation>纠错和功能请求</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="355"/>
        <source>Mailing List</source>
        <translation>邮件列表</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="329"/>
        <source>Official Translations and Translators:</source>
        <translation>官方翻译和翻译者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="331"/>
        <source>Previous Translation Contributors:</source>
        <translation>先前翻译贡献者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="97"/>
        <source>About Scribus %1</source>
        <translation>关于 %1</translation>
    </message>
    <message>
        <source>Windows Port:</source>
        <translation type="obsolete">Windows 移植:</translation>
    </message>
    <message>
        <source>Mac OSX Aqua Port:</source>
        <translation type="obsolete">Mac OSX Aqua 移植:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="349"/>
        <source>Wiki</source>
        <translation type="unfinished">Wiki</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="125"/>
        <source>%1 %2 %3</source>
        <translation type="unfinished">%1 %2 %3</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="133"/>
        <source>%3-%2-%1 %4 %5</source>
        <translation type="unfinished">%3-%2-%1 %4 %5</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="183"/>
        <source>Using Ghostscript version %1</source>
        <translation>当前Ghostscript版本 %1</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="185"/>
        <source>No Ghostscript version available</source>
        <translation>Ghostscript不可知 </translation>
    </message>
    <message>
        <source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
        <translation type="obsolete">&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="186"/>
        <source>Build ID:</source>
        <translation>编译 ID:</translation>
    </message>
    <message>
        <source>This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation type="obsolete">这个面板显示Scribus版本,编译日期以及编译进去的库支持。这里C-C-T-F指的是C=littlecms C=CUPS T=TIFF 支持 F=Fontconfig 支持。最后一个字母是渲染器 C=cairo 或者 A=libart。不存在的库支持以*号表示。这个也注明了Scribus检测到的Ghostscript版本号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="299"/>
        <source>Mac OS&amp;#174; X Aqua Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="303"/>
        <source>Windows&amp;#174; Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="317"/>
        <source>Tango Project Icons:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="229"/>
        <source>&amp;Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="277"/>
        <source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="301"/>
        <source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="315"/>
        <source>Splash Screen:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="273"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="274"/>
        <source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="275"/>
        <source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="276"/>
        <source>The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="186"/>
        <source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="186"/>
        <source>Scribus Version</source>
        <translation type="unfinished">Scribus版本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="233"/>
        <location filename="../../../scribus/ui/about.cpp" line="649"/>
        <source>Check for Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="647"/>
        <source>Abort Update Check</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="353"/>
        <source>Developer Blog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="240"/>
        <source>&amp;Licence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="249"/>
        <source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="309"/>
        <source>Doc Translators:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="313"/>
        <source>Webmasters:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/about.cpp" line="447"/>
        <location filename="../../../scribus/ui/about.cpp" line="559"/>
        <location filename="../../../scribus/ui/about.cpp" line="625"/>
        <source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AboutPlugins</name>
    <message>
        <source>Yes</source>
        <translation type="obsolete">是</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">否</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="68"/>
        <source>Filename:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="69"/>
        <source>Version:</source>
        <translation type="unfinished">版本:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="72"/>
        <source>Enabled:</source>
        <translation type="unfinished">启用:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="73"/>
        <source>Release Date:</source>
        <translation type="unfinished">发布日期:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="80"/>
        <source>Description:</source>
        <translation type="unfinished">描述:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="81"/>
        <source>Author(s):</source>
        <translation type="unfinished">作者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="82"/>
        <source>Copyright:</source>
        <translation type="unfinished">版权:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.cpp" line="83"/>
        <source>License:</source>
        <translation type="unfinished">授权:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aboutplugins.ui" line="13"/>
        <source>Scribus: About Plug-ins</source>
        <translation type="unfinished">Scribus: 关于插件</translation>
    </message>
</context>
<context>
    <name>AboutPluginsBase</name>
    <message>
        <source>Scribus: About Plug-ins</source>
        <translation type="obsolete">Scribus: 关于插件</translation>
    </message>
    <message>
        <source>File Name:</source>
        <translation type="obsolete">文件名:</translation>
    </message>
    <message>
        <source>Version:</source>
        <translation type="obsolete">版本:</translation>
    </message>
    <message>
        <source>Enabled:</source>
        <translation type="obsolete">启用:</translation>
    </message>
    <message>
        <source>Release Date:</source>
        <translation type="obsolete">发布日期:</translation>
    </message>
    <message>
        <source>Copyright:</source>
        <translation type="obsolete">版权:</translation>
    </message>
    <message>
        <source>Author(s):</source>
        <translation type="obsolete">作者:</translation>
    </message>
    <message>
        <source>Description:</source>
        <translation type="obsolete">描述:</translation>
    </message>
    <message>
        <source>License:</source>
        <translation type="obsolete">授权:</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>ActionManager</name>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1349"/>
        <source>&amp;Image Effects</source>
        <translation>&amp;I 图像效果</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1350"/>
        <source>&amp;Tabulators...</source>
        <translation>&amp;T 制表符...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1268"/>
        <source>&amp;New</source>
        <translation>&amp;N 新建</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1270"/>
        <source>&amp;Open...</source>
        <translation>&amp;O 打开...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1271"/>
        <source>&amp;Close</source>
        <translation>&amp;C 关闭</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1272"/>
        <source>&amp;Save</source>
        <translation>&amp;S 保存</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1273"/>
        <source>Save &amp;As...</source>
        <translation>&amp;A 另存为...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1274"/>
        <source>Re&amp;vert to Saved</source>
        <translation>&amp;V 恢复到已保存</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1275"/>
        <source>Collect for O&amp;utput...</source>
        <translation>&amp;U 准备输出...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1276"/>
        <source>Get Text...</source>
        <translation> 导入文本...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1277"/>
        <source>Append &amp;Text...</source>
        <translation>&amp;T 追加文本...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1278"/>
        <source>Get Image...</source>
        <translation> 导入图像...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1281"/>
        <source>Save &amp;Text...</source>
        <translation>&amp;T 保存文本...</translation>
    </message>
    <message>
        <source>Save Page as &amp;EPS...</source>
        <translation type="obsolete">&amp;E 页面存为EPS...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1283"/>
        <source>Save as P&amp;DF...</source>
        <translation>&amp;D 保存为PDF...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1284"/>
        <source>Document &amp;Setup...</source>
        <translation>&amp;S 文档设置...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1287"/>
        <source>&amp;Print...</source>
        <translation>&amp;P 打印...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1289"/>
        <source>&amp;Quit</source>
        <translation>&amp;Q 退出</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1291"/>
        <source>&amp;Undo</source>
        <translation>&amp;U 撤销</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1292"/>
        <source>&amp;Redo</source>
        <translation>&amp;R 重做</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1293"/>
        <source>&amp;Item Action Mode</source>
        <translation>&amp;I 项目动作模式</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1294"/>
        <source>Cu&amp;t</source>
        <translation>&amp;t 剪切</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1295"/>
        <location filename="../../../scribus/actionmanager.cpp" line="1297"/>
        <source>&amp;Copy</source>
        <translation>&amp;C 复制</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1296"/>
        <location filename="../../../scribus/actionmanager.cpp" line="1298"/>
        <source>&amp;Paste</source>
        <translation>&amp;P 粘贴</translation>
    </message>
    <message>
        <source>C&amp;lear Contents</source>
        <translation type="obsolete">&amp;L 清除内容</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1301"/>
        <source>Select &amp;All</source>
        <translation>&amp;A 全选</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1303"/>
        <source>&amp;Deselect All</source>
        <translation>&amp;D 取消全选</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1304"/>
        <source>&amp;Search/Replace...</source>
        <translation>&amp;S 查找/替换...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1307"/>
        <source>C&amp;olors...</source>
        <translation>&amp;O 颜色...</translation>
    </message>
    <message>
        <source>&amp;Paragraph Styles...</source>
        <translation type="obsolete">&amp;P 段落样式...</translation>
    </message>
    <message>
        <source>&amp;Line Styles...</source>
        <translation type="obsolete">&amp;L 线条样式...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1312"/>
        <source>&amp;Master Pages...</source>
        <translation>&amp;M 母页...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1285"/>
        <source>P&amp;references...</source>
        <translation>&amp;R 首选项...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1320"/>
        <source>%1 pt</source>
        <translation type="unfinished">%1 pt</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1322"/>
        <source>&amp;Other...</source>
        <translation>&amp;O 其他...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1323"/>
        <source>&amp;Left</source>
        <translation>&amp;L 左边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1324"/>
        <source>&amp;Center</source>
        <translation>&amp;C 中间</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1325"/>
        <source>&amp;Right</source>
        <translation>&amp;R 右边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1326"/>
        <source>&amp;Block</source>
        <translation>&amp;B 区块</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1327"/>
        <source>&amp;Forced</source>
        <translation>&amp;F 强制</translation>
    </message>
    <message>
        <source>&amp;%1 %</source>
        <translation type="obsolete">&amp;%1 %</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1338"/>
        <source>&amp;Normal</source>
        <translation>&amp;N 普通</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1339"/>
        <source>&amp;Underline</source>
        <translation>&amp;U 下划线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1340"/>
        <source>Underline &amp;Words</source>
        <translation>&amp;W 添加下划线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1341"/>
        <source>&amp;Strike Through</source>
        <translation>&amp;S 中划线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1342"/>
        <source>&amp;All Caps</source>
        <translation>&amp;A 全部大写</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1343"/>
        <source>Small &amp;Caps</source>
        <translation>&amp;C 小写</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1344"/>
        <source>Su&amp;perscript</source>
        <translation>&amp;P 上标</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1345"/>
        <source>Su&amp;bscript</source>
        <translation>&amp;B 下标</translation>
    </message>
    <message>
        <source>&amp;Outline</source>
        <translation type="obsolete">&amp;O 文档结构树</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1353"/>
        <source>D&amp;uplicate</source>
        <translation>&amp;U 复制</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1354"/>
        <source>&amp;Multiple Duplicate</source>
        <translation>&amp;M 多重复制</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1355"/>
        <source>&amp;Delete</source>
        <translation>&amp;D 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1356"/>
        <source>&amp;Group</source>
        <translation>&amp;G 群组</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1357"/>
        <source>&amp;Ungroup</source>
        <translation>&amp;U 解散群组</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1358"/>
        <source>Is &amp;Locked</source>
        <translation>&amp;L 锁定</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1359"/>
        <source>Si&amp;ze is Locked</source>
        <translation>&amp;Z 大小锁定</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1363"/>
        <source>Lower to &amp;Bottom</source>
        <translation type="unfinished">&amp;B 降低到底部</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1364"/>
        <source>Raise to &amp;Top</source>
        <translation>&amp;T 升高到顶部</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1365"/>
        <source>&amp;Lower</source>
        <translation>&amp;L 降低</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1366"/>
        <source>&amp;Raise</source>
        <translation>&amp;R 升高</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1367"/>
        <source>Send to S&amp;crapbook</source>
        <translation>&amp;C发送到寄存本</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1369"/>
        <source>&amp;Attributes...</source>
        <translation>&amp;A 属性...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1371"/>
        <source>I&amp;mage Visible</source>
        <translation>&amp;M 显示图像</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1379"/>
        <source>Is PDF &amp;Bookmark</source>
        <translation>&amp;B 为PDF书签</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1380"/>
        <source>Is PDF A&amp;nnotation</source>
        <translation>&amp;N 为PDF注释</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1381"/>
        <source>Annotation P&amp;roperties</source>
        <translation>&amp;R 注释属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1382"/>
        <source>Field P&amp;roperties</source>
        <translation>&amp;R 文字域属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1383"/>
        <source>&amp;Edit Shape...</source>
        <translation>&amp;E 编辑形状...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1384"/>
        <source>&amp;Attach Text to Path</source>
        <translation>&amp;A 附文字到路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1385"/>
        <source>&amp;Detach Text from Path</source>
        <translation>&amp;D 从路径分离文字</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1386"/>
        <source>&amp;Combine Polygons</source>
        <translation>&amp;C 合并多边形</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1387"/>
        <source>Split &amp;Polygons</source>
        <translation>&amp;P 分离多边形</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1388"/>
        <source>&amp;Bezier Curve</source>
        <translation>&amp;B 齐贝尔曲线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1389"/>
        <source>&amp;Image Frame</source>
        <translation>&amp;I 图像框</translation>
    </message>
    <message>
        <source>&amp;Outlines</source>
        <translation type="obsolete">&amp;O 轮廓</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1391"/>
        <source>&amp;Polygon</source>
        <translation>&amp;P 多边形</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1392"/>
        <source>&amp;Text Frame</source>
        <translation>&amp;T 文本框</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1396"/>
        <source>&amp;Glyph...</source>
        <translation>&amp;G 符号...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1397"/>
        <source>Sample Text</source>
        <translation>文本字样</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1401"/>
        <source>&amp;Insert...</source>
        <translation>&amp;I 插入...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1402"/>
        <source>Im&amp;port...</source>
        <translation>&amp;P 导入...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1403"/>
        <source>&amp;Delete...</source>
        <translation>&amp;D 删除...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1404"/>
        <source>&amp;Copy...</source>
        <translation>&amp;C 复制...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1405"/>
        <source>&amp;Move...</source>
        <translation>&amp;M 移动...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1406"/>
        <source>&amp;Apply Master Page...</source>
        <translation>&amp;A 应用母页...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1408"/>
        <source>Manage &amp;Guides...</source>
        <translation>&amp;G 管理参考线...</translation>
    </message>
    <message>
        <source>&amp;Fit in window</source>
        <translation type="obsolete">&amp;F 符合窗口</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1414"/>
        <source>&amp;50%</source>
        <translation type="unfinished">&amp;50%</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1415"/>
        <source>&amp;75%</source>
        <translation type="unfinished">&amp;75%</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1416"/>
        <source>&amp;100%</source>
        <translation type="unfinished">&amp;100%</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1417"/>
        <source>&amp;200%</source>
        <translation type="unfinished">&amp;200%</translation>
    </message>
    <message>
        <source>&amp;Thumbnails</source>
        <translation type="obsolete">&amp;T 缩图</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1420"/>
        <source>Show &amp;Margins</source>
        <translation>&amp;M 显示边距</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1422"/>
        <source>Show &amp;Frames</source>
        <translation>&amp;F 显示框体</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1424"/>
        <source>Show &amp;Images</source>
        <translation>&amp;I 显示图像</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1425"/>
        <source>Show &amp;Grid</source>
        <translation>&amp;G 显示网格</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1426"/>
        <source>Show G&amp;uides</source>
        <translation>&amp;U 显示参考线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1428"/>
        <source>Show &amp;Baseline Grid</source>
        <translation>&amp;B 显示底线网格</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1429"/>
        <source>Show &amp;Text Chain</source>
        <translation>&amp;T 显示文本链</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1433"/>
        <source>Sn&amp;ap to Grid</source>
        <translation>&amp;A 吸附到网格</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1434"/>
        <source>Sna&amp;p to Guides</source>
        <translation>&amp;P 吸附到参考线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1439"/>
        <source>&amp;Properties</source>
        <translation>&amp;P 属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1441"/>
        <source>&amp;Scrapbook</source>
        <translation>&amp;S 寄存本</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1442"/>
        <source>&amp;Layers</source>
        <translation>&amp;L 图层</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1444"/>
        <source>&amp;Bookmarks</source>
        <translation>&amp;B 书签</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1445"/>
        <source>&amp;Measurements</source>
        <translation>&amp;M 尺寸</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1446"/>
        <source>Action &amp;History</source>
        <translation>&amp;H 动作历史</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1447"/>
        <source>Preflight &amp;Verifier</source>
        <translation>&amp;V 印前检验器</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1449"/>
        <source>&amp;Tools</source>
        <translation>&amp;工具</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1450"/>
        <source>P&amp;DF Tools</source>
        <translation>P&amp;DF 工具</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1453"/>
        <source>Select Item</source>
        <translation>选择项目</translation>
    </message>
    <message>
        <source>T&amp;able</source>
        <translation type="obsolete">&amp;A 表格</translation>
    </message>
    <message>
        <source>&amp;Shape</source>
        <translation type="obsolete">&amp;S 形状</translation>
    </message>
    <message>
        <source>&amp;Line</source>
        <translation type="obsolete">&amp;L 线条</translation>
    </message>
    <message>
        <source>&amp;Freehand Line</source>
        <translation type="obsolete">&amp;F 手绘线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1454"/>
        <source>Rotate Item</source>
        <translation>旋转项目</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1455"/>
        <source>Zoom in or out</source>
        <translation>放大或缩小</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1456"/>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1457"/>
        <source>Zoom out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1458"/>
        <source>Edit Contents of Frame</source>
        <translation>编辑框内容</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1460"/>
        <source>Link Text Frames</source>
        <translation>串联文本框</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1461"/>
        <source>Unlink Text Frames</source>
        <translation>解链文本框</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1462"/>
        <source>&amp;Eye Dropper</source>
        <translation>&amp;E 取色器</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1463"/>
        <source>Copy Item Properties</source>
        <translation>复制项目属性</translation>
    </message>
    <message>
        <source>Edit the text with the Story Editor</source>
        <translation type="obsolete">用故事编辑器编辑文本</translation>
    </message>
    <message>
        <source>Insert Text Frame</source>
        <translation type="obsolete">插入文本框体</translation>
    </message>
    <message>
        <source>Insert Image Frame</source>
        <translation type="obsolete">插入图像框体</translation>
    </message>
    <message>
        <source>Insert Table</source>
        <translation type="obsolete">插入表格</translation>
    </message>
    <message>
        <source>Insert Shape</source>
        <translation type="obsolete">插入形状</translation>
    </message>
    <message>
        <source>Insert Polygon</source>
        <translation type="obsolete">插入多边形</translation>
    </message>
    <message>
        <source>Insert Line</source>
        <translation type="obsolete">插入线</translation>
    </message>
    <message>
        <source>Insert Bezier Curve</source>
        <translation type="obsolete">插入齐贝尔曲线</translation>
    </message>
    <message>
        <source>Insert Freehand Line</source>
        <translation type="obsolete">插入手绘线</translation>
    </message>
    <message>
        <source>&amp;Manage Pictures</source>
        <translation type="obsolete">&amp;M 管理图片</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1489"/>
        <source>&amp;Hyphenate Text</source>
        <translation>&amp;H 用连字符连字</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1491"/>
        <source>&amp;Generate Table Of Contents</source>
        <translation>&amp;G 生成目录索引</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1498"/>
        <source>&amp;About Scribus</source>
        <translation>&amp;A 关于Scribus</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1500"/>
        <source>About &amp;Qt</source>
        <translation>关于 &amp;Qt</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1501"/>
        <source>Toolti&amp;ps</source>
        <translation>&amp;P 提示</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1503"/>
        <source>Scribus &amp;Manual...</source>
        <translation>&amp;M Scribus 使用手册...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1521"/>
        <source>Smart &amp;Hyphen</source>
        <translation>&amp;H 智能连字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1523"/>
        <source>Non Breaking &amp;Space</source>
        <translation>&amp;S 不间断空格</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1524"/>
        <source>Page &amp;Number</source>
        <translation>&amp;N 页码</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1531"/>
        <source>Copyright</source>
        <translation>版权</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1532"/>
        <source>Registered Trademark</source>
        <translation>注册商标</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1533"/>
        <source>Trademark</source>
        <translation>商标</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1535"/>
        <source>Bullet</source>
        <translation>项目符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1537"/>
        <source>Em Dash</source>
        <translation>Em 破折号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1538"/>
        <source>En Dash</source>
        <translation>En 破折号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1539"/>
        <source>Figure Dash</source>
        <translation>图形破折号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1540"/>
        <source>Quotation Dash</source>
        <translation>引用破折号</translation>
    </message>
    <message>
        <source>Apostrophe</source>
        <translation type="obsolete">上标点</translation>
    </message>
    <message>
        <source>Straight Double</source>
        <translation type="obsolete">双倍直线</translation>
    </message>
    <message>
        <source>Single Left</source>
        <translation type="obsolete">单面左边</translation>
    </message>
    <message>
        <source>Single Right</source>
        <translation type="obsolete">单面右边</translation>
    </message>
    <message>
        <source>Double Left</source>
        <translation type="obsolete">双面左边</translation>
    </message>
    <message>
        <source>Double Right</source>
        <translation type="obsolete">双面右边</translation>
    </message>
    <message>
        <source>Single Reversed</source>
        <translation type="obsolete">单面反转</translation>
    </message>
    <message>
        <source>Double Reversed</source>
        <translation type="obsolete">双面反转</translation>
    </message>
    <message>
        <source>Single Left Guillemet</source>
        <translation type="obsolete">左单引号</translation>
    </message>
    <message>
        <source>Single Right Guillemet</source>
        <translation type="obsolete">右单引号</translation>
    </message>
    <message>
        <source>Double Left Guillemet</source>
        <translation type="obsolete">左双引号</translation>
    </message>
    <message>
        <source>Double Right Guillemet</source>
        <translation type="obsolete">右双引号</translation>
    </message>
    <message>
        <source>Low Single Comma</source>
        <translation type="obsolete">下单逗号</translation>
    </message>
    <message>
        <source>Low Double Comma</source>
        <translation type="obsolete">下双逗号</translation>
    </message>
    <message>
        <source>CJK Single Left</source>
        <translation type="obsolete">中日韩左单</translation>
    </message>
    <message>
        <source>CJK Single Right</source>
        <translation type="obsolete">中日韩右单</translation>
    </message>
    <message>
        <source>CJK Double Left</source>
        <translation type="obsolete">中日韩双左</translation>
    </message>
    <message>
        <source>CJK Double Right</source>
        <translation type="obsolete">中日韩双右</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1511"/>
        <source>Toggle Palettes</source>
        <translation>切换色板</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1347"/>
        <source>S&amp;hadow</source>
        <translation>&amp;H 阴影</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1376"/>
        <source>&amp;Low Resolution</source>
        <translation>&amp;L 底分辨率</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1377"/>
        <source>&amp;Normal Resolution</source>
        <translation>&amp;N 正常分辨率</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1378"/>
        <source>&amp;Full Resolution</source>
        <translation>&amp;F 完全分辨率</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1305"/>
        <source>Edit Image...</source>
        <translation>编辑图片...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1372"/>
        <source>&amp;Update Image</source>
        <translation>&amp;U 刷新图片</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1373"/>
        <source>Adjust Frame to Image</source>
        <translation>调整框体适应图片大小</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1375"/>
        <source>Extended Image Properties</source>
        <translation>图片扩展属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1430"/>
        <source>Show Control Characters</source>
        <translation>显示控制符</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1448"/>
        <source>&amp;Align and Distribute</source>
        <translation>&amp;A 对齐和分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1459"/>
        <source>Edit Text...</source>
        <translation>编辑文本...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1526"/>
        <source>New Line</source>
        <translation>新建线条</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1527"/>
        <source>Frame Break</source>
        <translation>分框</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1528"/>
        <source>Column Break</source>
        <translation>分列</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1522"/>
        <source>Non Breaking Dash</source>
        <translation>不间断破折号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1512"/>
        <source>Toggle Guides</source>
        <translation>切换参考线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1443"/>
        <source>&amp;Arrange Pages</source>
        <translation>&amp;A 安排页</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1490"/>
        <source>Dehyphenate Text</source>
        <translation>取消连字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1409"/>
        <source>Manage Page Properties...</source>
        <translation>管理页面属性...</translation>
    </message>
    <message>
        <source>Rulers relative to Page</source>
        <translation type="obsolete">标尺相对应于页面</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1288"/>
        <source>Print Previe&amp;w</source>
        <translation>&amp;W 打印预览</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1313"/>
        <source>&amp;JavaScripts...</source>
        <translation type="unfinished">&amp;JavaScripts...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1407"/>
        <source>Convert to Master Page...</source>
        <translation> 转换为母页...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1494"/>
        <source>&amp;Cascade</source>
        <translation>&amp;C 层叠</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1495"/>
        <source>&amp;Tile</source>
        <translation>&amp;T 平铺</translation>
    </message>
    <message>
        <source>&amp;About Plug-ins</source>
        <translation type="obsolete">&amp;A 关于插件</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1370"/>
        <source>More Info...</source>
        <translation>更多信息...</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1360"/>
        <source>&amp;Printing Enabled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1361"/>
        <source>&amp;Flip Horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1362"/>
        <source>&amp;Flip Vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1431"/>
        <source>Show Rulers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1440"/>
        <source>&amp;Outline</source>
        <comment>Document Outline Palette</comment>
        <translation type="unfinished">&amp;O 文档结构树</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1534"/>
        <source>Solidus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1536"/>
        <source>Middle Dot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1561"/>
        <source>En Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1562"/>
        <source>Em Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1563"/>
        <source>Thin Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1564"/>
        <source>Thick Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1565"/>
        <source>Mid Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1566"/>
        <source>Hair Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1578"/>
        <source>ff</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1579"/>
        <source>fi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1580"/>
        <source>fl</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1581"/>
        <source>ffi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1582"/>
        <source>ffl</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1583"/>
        <source>ft</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1584"/>
        <source>st</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1311"/>
        <source>S&amp;tyles...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1346"/>
        <source>&amp;Outline</source>
        <comment>type effect</comment>
        <translation type="unfinished">&amp;O 文档结构树</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1390"/>
        <source>&amp;Outlines</source>
        <comment>Convert to oulines</comment>
        <translation type="unfinished">&amp;O 轮廓</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1299"/>
        <source>Paste (&amp;Absolute)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1300"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">&amp;L 清除</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1475"/>
        <source>Insert PDF Push Button</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1476"/>
        <source>Insert PDF Text Field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1477"/>
        <source>Insert PDF Check Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1478"/>
        <source>Insert PDF Combo Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1479"/>
        <source>Insert PDF List Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1480"/>
        <source>Insert Text Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1481"/>
        <source>Insert Link Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1282"/>
        <source>Save as &amp;EPS...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1427"/>
        <source>Show Text Frame Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1395"/>
        <source>&amp;Frame...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1419"/>
        <source>Preview Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1423"/>
        <source>Show Layer Indicators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1309"/>
        <source>Patterns...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1286"/>
        <source>P&amp;references 150...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1310"/>
        <source>Gradients...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1368"/>
        <source>Send to Patterns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1398"/>
        <source>Sticky Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1412"/>
        <source>&amp;Fit to Height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1413"/>
        <source>Fit to Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1421"/>
        <source>Show Bleeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1483"/>
        <source>Insert 3D Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1529"/>
        <source>&amp;Zero Width Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1530"/>
        <source>Zero Width NB Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1542"/>
        <source>Apostrophe</source>
        <comment>Unicode 0x0027</comment>
        <translation type="unfinished">上标点</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1543"/>
        <source>Straight Double</source>
        <comment>Unicode 0x0022</comment>
        <translation type="unfinished">双倍直线</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1544"/>
        <source>Single Left</source>
        <comment>Unicode 0x2018</comment>
        <translation type="unfinished">单面左边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1545"/>
        <source>Single Right</source>
        <comment>Unicode 0x2019</comment>
        <translation type="unfinished">单面右边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1546"/>
        <source>Double Left</source>
        <comment>Unicode 0x201C</comment>
        <translation type="unfinished">双面左边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1547"/>
        <source>Double Right</source>
        <comment>Unicode 0x201D</comment>
        <translation type="unfinished">双面右边</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1548"/>
        <source>Single Reversed</source>
        <comment>Unicode 0x201B</comment>
        <translation type="unfinished">单面反转</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1549"/>
        <source>Double Reversed</source>
        <comment>Unicode 0x201F</comment>
        <translation type="unfinished">双面反转</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1550"/>
        <source>Single Left Guillemet</source>
        <comment>Unicode 0x2039</comment>
        <translation type="unfinished">左单引号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1551"/>
        <source>Single Right Guillemet</source>
        <comment>Unicode 0x203A</comment>
        <translation type="unfinished">右单引号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1552"/>
        <source>Double Left Guillemet</source>
        <comment>Unicode 0x00AB</comment>
        <translation type="unfinished">左双引号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1553"/>
        <source>Double Right Guillemet</source>
        <comment>Unicode 0x00BB</comment>
        <translation type="unfinished">右双引号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1554"/>
        <source>Low Single Comma</source>
        <comment>Unicode 0x201A</comment>
        <translation type="unfinished">下单逗号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1555"/>
        <source>Low Double Comma</source>
        <comment>Unicode 0x201E</comment>
        <translation type="unfinished">下双逗号</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1556"/>
        <source>CJK Single Left</source>
        <comment>Unicode 0x300C</comment>
        <translation type="unfinished">中日韩左单</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1557"/>
        <source>CJK Single Right</source>
        <comment>Unicode 0x300D</comment>
        <translation type="unfinished">中日韩右单</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1558"/>
        <source>CJK Double Left</source>
        <comment>Unicode 0x300E</comment>
        <translation type="unfinished">中日韩双左</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1559"/>
        <source>CJK Double Right</source>
        <comment>Unicode 0x300F</comment>
        <translation type="unfinished">中日韩双右</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1418"/>
        <source>&amp;400%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1465"/>
        <source>Insert &amp;Text Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1466"/>
        <source>Insert &amp;Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1468"/>
        <source>Insert T&amp;able</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1469"/>
        <source>Insert &amp;Shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1470"/>
        <source>Insert &amp;Polygon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1471"/>
        <source>Insert &amp;Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1472"/>
        <source>Insert &amp;Bezier Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1473"/>
        <source>Insert &amp;Freehand Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1504"/>
        <source>Scribus Homepage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1505"/>
        <source>Scribus Online Documentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1506"/>
        <source>Scribus Wiki</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1507"/>
        <source>Getting Started with Scribus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1435"/>
        <source>Show Context Menu</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1488"/>
        <source>&amp;Manage Images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1499"/>
        <source>&amp;About Plugins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1513"/>
        <source>Insert Unicode Character Begin Sequence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1279"/>
        <source>Get Vector File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1302"/>
        <source>Advanced Select All...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1306"/>
        <source>Edit Source...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1308"/>
        <source>Replace Colors...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1432"/>
        <source>Rulers Relative to Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1467"/>
        <source>Insert &amp;Render Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1508"/>
        <source>Check for Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1525"/>
        <source>Number of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1374"/>
        <source>Adjust Image to Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1706"/>
        <source>File</source>
        <translation type="unfinished">文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1706"/>
        <source>&amp;File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1708"/>
        <source>Edit</source>
        <translation type="unfinished">编辑</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1708"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">&amp;E 编辑</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1710"/>
        <source>Style</source>
        <translation type="unfinished">样式</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1710"/>
        <source>&amp;Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1712"/>
        <source>Item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1712"/>
        <source>&amp;Item</source>
        <translation type="unfinished">&amp;I 效果</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1714"/>
        <source>Insert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1714"/>
        <source>I&amp;nsert</source>
        <translation type="unfinished">&amp;N 插入</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1716"/>
        <source>Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1716"/>
        <source>&amp;Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1718"/>
        <source>View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1718"/>
        <source>&amp;View</source>
        <translation type="unfinished">&amp;V 查看</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1720"/>
        <source>Extras</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1720"/>
        <source>E&amp;xtras</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1722"/>
        <source>Windows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1722"/>
        <source>&amp;Windows</source>
        <translation type="unfinished">&amp;W 窗口</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1724"/>
        <source>Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1724"/>
        <source>&amp;Help</source>
        <translation type="unfinished">&amp;H 帮助</translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1892"/>
        <source>Plugin Menu Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1894"/>
        <source>Others</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1896"/>
        <source>Unicode Characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1502"/>
        <source>Move/Resize Value Indicator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/actionmanager.cpp" line="1269"/>
        <source>New &amp;from Template...</source>
        <translation type="unfinished">&amp;F 从模板新建...</translation>
    </message>
</context>
<context>
    <name>AdjustCmsDialog</name>
    <message>
        <location filename="../../../scribus/ui/adjustcmsdialog.cpp" line="16"/>
        <source>CMS Settings</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignDistribute</name>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="36"/>
        <source>Align</source>
        <translation type="unfinished">对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="65"/>
        <source>&amp;Selected Guide:</source>
        <translation type="unfinished">&amp;S 已选参考线:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="78"/>
        <source>&amp;Relative To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="137"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="144"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="151"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="158"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="165"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="172"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="179"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="186"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="193"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="200"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="273"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="280"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="287"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="294"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="301"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="311"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="318"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="328"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="335"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="345"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="352"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="359"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="369"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="376"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="383"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="390"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="521"/>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="528"/>
        <source>...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="244"/>
        <source>Distribute</source>
        <translation type="unfinished">分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="437"/>
        <source>&amp;Distance:</source>
        <translation type="unfinished">&amp;D 间距:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.ui" line="500"/>
        <source>Swap</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignDistributeBase</name>
    <message>
        <source>Align and Distribute</source>
        <translation type="obsolete">对齐和分布</translation>
    </message>
    <message>
        <source>Align</source>
        <translation type="obsolete">对齐</translation>
    </message>
    <message>
        <source>&amp;Selected Guide:</source>
        <translation type="obsolete">&amp;S 已选参考线:</translation>
    </message>
    <message>
        <source>Distribute</source>
        <translation type="obsolete">分布</translation>
    </message>
    <message>
        <source>&amp;Distance:</source>
        <translation type="obsolete">&amp;D 间距:</translation>
    </message>
</context>
<context>
    <name>AlignDistributePalette</name>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="90"/>
        <source>Align and Distribute</source>
        <translation>对齐和分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="91"/>
        <source>Align</source>
        <translation type="unfinished">对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="93"/>
        <source>&amp;Relative to:</source>
        <translation>&amp;R 对应于:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="96"/>
        <source>First Selected</source>
        <translation>先选择</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="97"/>
        <source>Last Selected</source>
        <translation>后选择</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="98"/>
        <source>Page</source>
        <translation>页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="99"/>
        <source>Margins</source>
        <translation>边距</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="101"/>
        <source>Selection</source>
        <translation>选择</translation>
    </message>
    <message>
        <source>Align right sides of objects to left side of anchor</source>
        <translation type="obsolete">对象的右边和锚点的左边对齐</translation>
    </message>
    <message>
        <source>Align left sides of objects to right side of anchor</source>
        <translation type="obsolete">对象的左边和锚点的右边对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="111"/>
        <source>Align bottoms</source>
        <translation>底部对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="113"/>
        <source>Align right sides</source>
        <translation>右边对齐</translation>
    </message>
    <message>
        <source>Align tops of objects to bottom of anchor</source>
        <translation type="obsolete">对象顶部和锚点底部对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="117"/>
        <source>Center on vertical axis</source>
        <translation>以垂直轴居中</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="119"/>
        <source>Align left sides</source>
        <translation>左边对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="121"/>
        <source>Center on horizontal axis</source>
        <translation>以水平轴居中</translation>
    </message>
    <message>
        <source>Align bottoms of objects to top of anchor</source>
        <translation type="obsolete">对象底部和锚点顶部对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="125"/>
        <source>Align tops</source>
        <translation>顶部对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="92"/>
        <source>Distribute</source>
        <translation type="unfinished">分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="145"/>
        <source>Distribute left sides equidistantly</source>
        <translation>左边等距分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="137"/>
        <source>Distribute bottoms equidistantly</source>
        <translation>底部等距分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="139"/>
        <source>Distribute centers equidistantly horizontally</source>
        <translation>中间水平等距分布</translation>
    </message>
    <message>
        <source>Make vertical gaps between objects equal</source>
        <translation type="obsolete">让对象垂直间距相等</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="147"/>
        <source>Distribute centers equidistantly vertically</source>
        <translation>中间垂直等距分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="149"/>
        <source>Distribute tops equidistantly</source>
        <translation>顶部等距分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="135"/>
        <source>Distribute right sides equidistantly</source>
        <translation>右边等距分布</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="100"/>
        <source>Guide</source>
        <translation>参考线</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="127"/>
        <source>&amp;Selected Guide:</source>
        <translation>&amp;S 已选参考线:</translation>
    </message>
    <message>
        <source>Make horizontal gaps between objects equal</source>
        <translation type="obsolete">让对象水平间距相等</translation>
    </message>
    <message>
        <source>Make horizontal gaps between objects equal to the value specified</source>
        <translation type="obsolete">让对象水平间距和指定值相等</translation>
    </message>
    <message>
        <source>Make vertical gaps between objects equal to the value specified</source>
        <translation type="obsolete">让对象垂直间距和指定值相等</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="159"/>
        <source>&amp;Distance:</source>
        <translation>&amp;D 间距:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="160"/>
        <source>Distribute the items with the distance specified</source>
        <translation>按指定的间距分布项目</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="162"/>
        <source>None Selected</source>
        <translation>没有选定</translation>
    </message>
    <message>
        <source>Some objects are locked.</source>
        <translation type="obsolete">某些对象被锁定</translation>
    </message>
    <message>
        <source>&amp;Unlock All</source>
        <translation type="obsolete">&amp;U 全部解锁</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="459"/>
        <source>Y: %1%2</source>
        <translation type="unfinished">Y: %1%2</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="467"/>
        <source>X: %1%2</source>
        <translation type="unfinished">X: %1%2</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="107"/>
        <source>Align right sides of items to left side of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="109"/>
        <source>Align left sides of items to right side of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="115"/>
        <source>Align tops of items to bottom of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="123"/>
        <source>Align bottoms of items to top of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="130"/>
        <source>Make horizontal gaps between items equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="132"/>
        <source>Make horizontal gaps between items equal to the value specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="141"/>
        <source>Make vertical gaps between items equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="143"/>
        <source>Make vertical gaps between items equal to the value specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="151"/>
        <source>Make horizontal gaps between items and sides of page equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="157"/>
        <source>Make vertical gaps between items and the top and bottom of page margins equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="164"/>
        <source>Swap items to the left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="165"/>
        <source>Swap items to the right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="155"/>
        <source>Make horizontal gaps between items and sides of page margins equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="153"/>
        <source>Make vertical gaps between items and the top and bottom of page equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="103"/>
        <source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/aligndistribute.cpp" line="105"/>
        <source>The location of the selected guide to align to</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignSelect</name>
    <message>
        <location filename="../../../scribus/ui/alignselect.cpp" line="110"/>
        <source>Align Text Left</source>
        <translation>文本左对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/alignselect.cpp" line="111"/>
        <source>Align Text Right</source>
        <translation>文本右对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/alignselect.cpp" line="112"/>
        <source>Align Text Center</source>
        <translation>文本居中对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/alignselect.cpp" line="113"/>
        <source>Align Text Justified</source>
        <translation>文本两端对齐</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/alignselect.cpp" line="114"/>
        <source>Align Text Forced Justified</source>
        <translation>文本强制两端对齐</translation>
    </message>
</context>
<context>
    <name>Annot</name>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="61"/>
        <source>Field Properties</source>
        <translation>域属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="92"/>
        <location filename="../../../scribus/ui/annot.cpp" line="534"/>
        <source>Type:</source>
        <translation>类型:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="96"/>
        <source>Button</source>
        <translation>按钮</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="96"/>
        <source>Text Field</source>
        <translation>文本域</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="96"/>
        <source>Check Box</source>
        <translation>勾选框</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="96"/>
        <source>Combo Box</source>
        <translation>多选框</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="96"/>
        <source>List Box</source>
        <translation>列举框</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="111"/>
        <source>Properties</source>
        <translation>属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="121"/>
        <source>Name:</source>
        <translation>名称:</translation>
    </message>
    <message>
        <source>Tool-Tip:</source>
        <translation type="obsolete">工具提示:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="146"/>
        <location filename="../../../scribus/ui/annot.cpp" line="274"/>
        <source>Text</source>
        <translation>文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="176"/>
        <source>Border</source>
        <translation>边</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="182"/>
        <source>Color:</source>
        <translation>颜色:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="2110"/>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="197"/>
        <source>Width:</source>
        <translation>宽度:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="201"/>
        <source>Thin</source>
        <translation>瘦</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="201"/>
        <location filename="../../../scribus/ui/annot.cpp" line="311"/>
        <source>Normal</source>
        <translation>正常</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="201"/>
        <source>Wide</source>
        <translation>宽</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="209"/>
        <source>Style:</source>
        <translation>样式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="213"/>
        <source>Solid</source>
        <translation>实</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="213"/>
        <source>Dashed</source>
        <translation>点</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="213"/>
        <source>Underline</source>
        <translation>下划线</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="214"/>
        <source>Beveled</source>
        <translation>斜面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="214"/>
        <source>Inset</source>
        <translation>凹入</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="224"/>
        <source>Other</source>
        <translation>其他</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="230"/>
        <source>Read Only</source>
        <translation>只读</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="236"/>
        <source>Required</source>
        <translation>必需</translation>
    </message>
    <message>
        <source>Don&apos;t Export Value</source>
        <translation type="obsolete">Don&apos;t 输出值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="248"/>
        <source>Visibility:</source>
        <translation>可见度:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="252"/>
        <source>Visible</source>
        <translation>可见</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="252"/>
        <source>Hidden</source>
        <translation>隐蔽</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="252"/>
        <source>No Print</source>
        <translation>不可打印</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="253"/>
        <source>No View</source>
        <translation>不可查看</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="262"/>
        <source>Appearance</source>
        <translation>外观</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="280"/>
        <source>Text for Button Down</source>
        <translation>按钮下陷文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="283"/>
        <source>Text for Roll Over</source>
        <translation>鼠标经过文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="294"/>
        <source>Icons</source>
        <translation>图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="300"/>
        <source>Use Icons</source>
        <translation>使用图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="321"/>
        <location filename="../../../scribus/ui/annot.cpp" line="339"/>
        <location filename="../../../scribus/ui/annot.cpp" line="357"/>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="329"/>
        <source>Pressed</source>
        <translation>按下</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="347"/>
        <source>Roll Over</source>
        <translation>鼠标经过</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="366"/>
        <source>Icon Placement...</source>
        <translation>图标位置...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="415"/>
        <source>Highlight</source>
        <translation>高亮</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="422"/>
        <source>Invert</source>
        <translation>反转</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="422"/>
        <source>Outlined</source>
        <translation>概要</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="422"/>
        <source>Push</source>
        <translation>推</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="439"/>
        <source>Multi-Line</source>
        <translation>多行</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="443"/>
        <source>Password</source>
        <translation>密码</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="450"/>
        <source>Limit of</source>
        <translation>限制于</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="461"/>
        <source>Characters</source>
        <translation>字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="467"/>
        <source>Do Not Scroll</source>
        <translation>不要滚动</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="471"/>
        <source>Do Not Spell Check</source>
        <translation>不拼写检查</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="486"/>
        <source>Check Style:</source>
        <translation>勾选样式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Check</source>
        <translation>勾选</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Cross</source>
        <translation>十字</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Diamond</source>
        <translation>宝石</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Circle</source>
        <translation>圆形</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Star</source>
        <translation>星星</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="489"/>
        <source>Square</source>
        <translation>方形</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="503"/>
        <source>Default is Checked</source>
        <translation>默认已勾选</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="515"/>
        <source>Editable</source>
        <translation>可编辑</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="522"/>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="538"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2073"/>
        <source>Go To</source>
        <translation>转到</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="539"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2074"/>
        <source>Submit Form</source>
        <translation>提交表单</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="539"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2074"/>
        <source>Reset Form</source>
        <translation>清空表单</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="539"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2074"/>
        <source>Import Data</source>
        <translation>导入数据</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="571"/>
        <source>Event:</source>
        <translation>事件:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="574"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2053"/>
        <source>Mouse Up</source>
        <translation>鼠标上移</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="574"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2053"/>
        <source>Mouse Down</source>
        <translation>鼠标下移</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="574"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2053"/>
        <source>Mouse Enter</source>
        <translation>鼠标进入</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="575"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2054"/>
        <source>Mouse Exit</source>
        <translation>鼠标退出</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="575"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2054"/>
        <source>On Focus</source>
        <translation>聚焦</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="575"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2054"/>
        <source>On Blur</source>
        <translation>模糊</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="586"/>
        <source>Script:</source>
        <translation>脚本:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="605"/>
        <location filename="../../../scribus/ui/annot.cpp" line="934"/>
        <location filename="../../../scribus/ui/annot.cpp" line="960"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1037"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1112"/>
        <source>Edit...</source>
        <translation>编辑...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="671"/>
        <source>Submit to URL:</source>
        <translation>提交到URL地址:</translation>
    </message>
    <message>
        <source>Submit Data as HTML</source>
        <translation type="obsolete">作为HTML来提交数据</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="708"/>
        <source>Import Data from:</source>
        <translation>从...导入数据:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="611"/>
        <source>Destination</source>
        <translation>目的地</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="617"/>
        <source>To File:</source>
        <translation>到文件:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="624"/>
        <source>Change...</source>
        <translation>更改...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="633"/>
        <source>Page:</source>
        <translation>页:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="647"/>
        <source>X-Pos:</source>
        <translation>X-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="650"/>
        <location filename="../../../scribus/ui/annot.cpp" line="659"/>
        <source> pt</source>
        <translation type="unfinished"> pt</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="655"/>
        <source>Y-Pos:</source>
        <translation>Y-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="717"/>
        <source>Action</source>
        <translation>动作</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="748"/>
        <source>Field is formatted as:</source>
        <translation>域格式化为:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Plain</source>
        <translation>纯</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Number</source>
        <translation>数字</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Percentage</source>
        <translation>百分数</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Time</source>
        <translation>时间</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="751"/>
        <source>Custom</source>
        <translation>自定义</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="769"/>
        <source>Number Format</source>
        <translation>数字格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="778"/>
        <location filename="../../../scribus/ui/annot.cpp" line="837"/>
        <source>Decimals:</source>
        <translation>小数位:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="792"/>
        <source>Use Currency Symbol</source>
        <translation>使用货币符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="801"/>
        <source>Prepend Currency Symbol</source>
        <translation>预设货币符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="805"/>
        <location filename="../../../scribus/ui/annot.cpp" line="848"/>
        <source>Formatting</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="828"/>
        <source>Percent Format</source>
        <translation>百分数格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="871"/>
        <source>Date Format</source>
        <translation>日期格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="897"/>
        <source>Time Format</source>
        <translation>时间格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="919"/>
        <source>Custom Scripts</source>
        <translation>自定义脚本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="931"/>
        <source>Format:</source>
        <translation>格式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="957"/>
        <source>Keystroke:</source>
        <translation>按键:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="981"/>
        <source>Format</source>
        <translation>格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="997"/>
        <source>Value is not validated</source>
        <translation>为验校值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1006"/>
        <source>Value must be greater than or equal to:</source>
        <translation>值必须大于或等于:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1010"/>
        <source>and less or equal to:</source>
        <translation>而且小于或等于:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1021"/>
        <source>Custom validate script:</source>
        <translation type="unfinished">自定义验证脚本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1042"/>
        <source>Validate</source>
        <translation>验证</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1059"/>
        <source>Value is not calculated</source>
        <translation>没有计算值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1068"/>
        <source>Value is the</source>
        <translation>值是</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1073"/>
        <source>sum</source>
        <translation>求和</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1073"/>
        <source>product</source>
        <translation type="unfinished">相乘</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1073"/>
        <source>average</source>
        <translation>平均</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1073"/>
        <source>minimum</source>
        <translation>最小值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1074"/>
        <source>maximum</source>
        <translation>最大值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1081"/>
        <source>of the following fields:</source>
        <translation>下面域:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1091"/>
        <source>Pick...</source>
        <translation>选择...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1096"/>
        <source>Custom calculation script:</source>
        <translation>自定义计算脚本:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1116"/>
        <source>Calculate</source>
        <translation>计算</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1135"/>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1139"/>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1192"/>
        <source>Enter a comma separated list of fields here</source>
        <translation>在此输入以逗号隔开的域列表</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1193"/>
        <source>You need at least the Icon for Normal to use Icons for Buttons</source>
        <translation>你最起码需要用于普通的图标来使用按钮的图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1303"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1335"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1360"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2268"/>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1475"/>
        <source>Example:</source>
        <translation>范例:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="2102"/>
        <source>Selection Change</source>
        <translation>选择更改</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="152"/>
        <source>Font for use with PDF 1.3:</source>
        <translation>用于PDF 1.3的字体:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1190"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1191"/>
        <source>Flag is ignored for PDF 1.3</source>
        <translation>选项被PDF 1.3所忽略</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="2268"/>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation>PDF 文件 (*.pdf);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="538"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2073"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2111"/>
        <source>JavaScript</source>
        <translation type="unfinished">JavaScript</translation>
    </message>
    <message>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;All Files (*)</source>
        <translation type="obsolete">图像 (*.tif *.png *.jpg *.xpm);;PostScript (*.eps);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="422"/>
        <source>None</source>
        <comment>highlight</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="538"/>
        <location filename="../../../scribus/ui/annot.cpp" line="2073"/>
        <source>None</source>
        <comment>action</comment>
        <translation type="unfinished">无</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="134"/>
        <source>Tooltip:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="242"/>
        <source>Do Not Export Value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1336"/>
        <location filename="../../../scribus/ui/annot.cpp" line="1361"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="1304"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="626"/>
        <source>Export absolute Filename</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="683"/>
        <source>Submit format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="686"/>
        <source>FDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="686"/>
        <source>HTML</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="686"/>
        <source>XFDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annot.cpp" line="686"/>
        <source>PDF</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Annota</name>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="47"/>
        <source>Annotation Properties</source>
        <translation>注释属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="77"/>
        <source>Text</source>
        <translation>文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="78"/>
        <source>Link</source>
        <translation>链接</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="79"/>
        <source>External Link</source>
        <translation>外部链接</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="80"/>
        <source>External Web-Link</source>
        <translation>外部网页链接</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="118"/>
        <source>Destination</source>
        <translation>目的地</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="168"/>
        <location filename="../../../scribus/ui/annota.cpp" line="177"/>
        <source> pt</source>
        <translation type="unfinished"> pt</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="409"/>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>PDF-Documents (*.pdf);;All Files (*)</source>
        <translation type="obsolete">PDF文件 (*.pdf);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="82"/>
        <source>&amp;Type:</source>
        <translation>&amp;T 类型</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="129"/>
        <source>C&amp;hange...</source>
        <translation>&amp;H 更改...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="147"/>
        <source>&amp;Page:</source>
        <translation>&amp;P 页:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="171"/>
        <source>&amp;X-Pos</source>
        <translation>&amp;X-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="179"/>
        <source>&amp;Y-Pos:</source>
        <translation>&amp;Y-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="409"/>
        <source>%1;;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/annota.cpp" line="131"/>
        <source>Export absolute Filename</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ApplyMasterPageDialog</name>
    <message>
        <source>Normal</source>
        <translation type="obsolete">普通</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="267"/>
        <source>Apply Master Page</source>
        <translation>应用母页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="268"/>
        <source>&amp;Master Page:</source>
        <translation>&amp;M 母页:</translation>
    </message>
    <message>
        <source>Apply To</source>
        <translation type="obsolete">应用到</translation>
    </message>
    <message>
        <source>Current &amp;page</source>
        <translation type="obsolete">&amp;P 当前页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="271"/>
        <source>Alt+P</source>
        <translation type="unfinished">Alt+P</translation>
    </message>
    <message>
        <source>&amp;Even pages</source>
        <translation type="obsolete">&amp;偶数页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="273"/>
        <source>Alt+E</source>
        <translation type="unfinished">Alt+E</translation>
    </message>
    <message>
        <source>O&amp;dd pages</source>
        <translation type="obsolete">&amp;D 奇数页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="275"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <source>&amp;All pages</source>
        <translation type="obsolete">&amp;A 全部页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="277"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Within range</source>
        <translation type="obsolete">&amp;W 在范围内</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="279"/>
        <source>Alt+W</source>
        <translation type="unfinished">Alt+W</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="281"/>
        <source>to</source>
        <translation type="unfinished">to</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="283"/>
        <source>Alt+O</source>
        <translation type="unfinished">Alt+O</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="285"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <source>Apply the selected template to even, odd or all pages within the following range</source>
        <translation type="obsolete">在以下的范围内应用所选的模板到偶数页、奇数页或者全部页面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="280"/>
        <source>Apply the selected master page to even, odd or all pages within the following range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="52"/>
        <source>Possible Hyphenation</source>
        <translation type="unfinished">可能连字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="269"/>
        <source>Apply to</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="270"/>
        <source>Current &amp;Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="272"/>
        <source>&amp;Even Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="274"/>
        <source>O&amp;dd Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="276"/>
        <source>&amp;All Pages</source>
        <translation type="unfinished">&amp;A 全部页面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/applytemplatedialog.cpp" line="278"/>
        <source>&amp;Within Range</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ArrowChooser</name>
    <message>
        <source>None</source>
        <translation type="obsolete">无</translation>
    </message>
</context>
<context>
    <name>AspellPlugin</name>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="68"/>
        <source>Spell-checking support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
        <source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="74"/>
        <source>0.1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="36"/>
        <source>Spell Checker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="99"/>
        <source>Aspell Plugin Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AspellPluginBase</name>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
        <source>Spell Check</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
        <source>Replacement:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
        <source>&amp;Add Word</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
        <source>&amp;Change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Exit</source>
        <translation type="obsolete">&amp;E 退出</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
        <source>Not in Dictionary:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
        <source>Word that was not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
        <source>Replacement text for the current word that was not found in the dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
        <source>Active Dictionary: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
        <source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
        <source>Ignore the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
        <source>&amp;Ignore</source>
        <translation type="unfinished">&amp;I 忽略</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
        <source>Ignore all occurrences of the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
        <source>I&amp;gnore All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
        <source>Add the current word to the your personal spelling dictionary for future use</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
        <source>Change the current word that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
        <source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
        <source>Change A&amp;ll</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
        <source>Close</source>
        <translation type="unfinished">关闭</translation>
    </message>
</context>
<context>
    <name>AspellPluginImpl</name>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
        <source>Loaded </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
        <source>default </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="44"/>
        <source> aspell dictionary.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="89"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="96"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="365"/>
        <source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="367"/>
        <source> by adding it to the session list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="388"/>
        <source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="242"/>
        <source>Spelling check complete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="243"/>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="434"/>
        <source>Spell Checker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="69"/>
        <source>No available Aspell dictionaries found. Install some, please.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="435"/>
        <source>Do you want start from the beginning of the selection with new language selected?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AutoformButtonGroup</name>
    <message>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="36"/>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1280"/>
        <source>Arrows</source>
        <translation type="unfinished">箭头</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="44"/>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1281"/>
        <source>Flow Chart</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="53"/>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1282"/>
        <source>Jigsaw</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="66"/>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1283"/>
        <source>Specials</source>
        <translation type="unfinished">特别符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="21"/>
        <location filename="../../../scribus/ui/autoformbuttongroup.cpp" line="1279"/>
        <source>Default Shapes</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Barcode</name>
    <message>
        <source>&amp;Barcode Generator...</source>
        <translation type="obsolete">&amp;B 条形码生成器...</translation>
    </message>
    <message>
        <source>Scribus frontend for Pure Postscript Barcode Writer</source>
        <translation type="obsolete">Scribus 纯Postscript条形码输出前端</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
        <source>&amp;Barcode...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
        <source>Scribus frontend for Pure PostScript Barcode Writer</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGenerator</name>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="340"/>
        <source>Error opening file: %1</source>
        <translation type="unfinished">打开文件错误:%1</translation>
    </message>
    <message>
        <source>Error creating preview</source>
        <translation type="obsolete">生成预览错误</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
        <source>12 or 13 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
        <source>8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
        <source>11 or 12 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
        <source>7 or 8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
        <source>5 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
        <source>2 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
        <source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="63"/>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
        <source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
        <source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
        <source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="74"/>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="82"/>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="85"/>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
        <source>Variable number of digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
        <source>Variable number of digits and capital letters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
        <source>Variable number of hexadecimal characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="374"/>
        <source>Barcode incomplete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
        <source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
        <source>Select Type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="163"/>
        <source>Select Barcode Type</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGeneratorBase</name>
    <message>
        <source>Barcode Creator</source>
        <translation type="obsolete">条形码生成器</translation>
    </message>
    <message>
        <source>Barcode</source>
        <translation type="obsolete">条形码</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="140"/>
        <source>&amp;Type:</source>
        <translation type="unfinished">&amp;T 类型</translation>
    </message>
    <message>
        <source>C&amp;ode:</source>
        <translation type="obsolete">&amp;O 编码:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="133"/>
        <source>Select one of the available barcode type here</source>
        <translation type="unfinished">在此选择一个可用的条形码类型</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="113"/>
        <source>The numeric representation of the code itself. See the help message below</source>
        <translation type="unfinished">代表编码的数字。下面有帮助信息可循</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="103"/>
        <source>Reset the barcode samples</source>
        <translation type="unfinished">重置条形码范例</translation>
    </message>
    <message>
        <source>&amp;Include text in barcode</source>
        <translation type="obsolete">&amp;I 在条形码中包含文字</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="81"/>
        <source>Alt+I</source>
        <translation type="unfinished">Alt+I</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="75"/>
        <source>If checked, there will be numbers in the barcode too</source>
        <translation type="unfinished">如果勾选,在条形码中也会有数字</translation>
    </message>
    <message>
        <source>&amp;Guard whitespace</source>
        <translation type="obsolete">&amp;G 注意留白</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="68"/>
        <source>Alt+G</source>
        <translation type="unfinished">Alt+G</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="62"/>
        <source>Draw arrows to be sure of space next the code</source>
        <translation type="unfinished">画箭头确保编码旁的空位 </translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="156"/>
        <source>Colors</source>
        <translation type="unfinished">颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="184"/>
        <source>&amp;Background</source>
        <translation type="unfinished">&amp;B 背景</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="187"/>
        <source>Alt+B</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="181"/>
        <source>Background color - under the code lines</source>
        <translation type="unfinished">背景颜色-在编码线下面</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="216"/>
        <source>&amp;Lines</source>
        <translation type="unfinished">&amp;L 线条</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="219"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="213"/>
        <source>Color of the lines in barcode</source>
        <translation type="unfinished">条形码线条的颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="248"/>
        <source>&amp;Text</source>
        <translation type="unfinished">&amp;T 文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="251"/>
        <source>Alt+T</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="245"/>
        <source>Color of the text and numbers</source>
        <translation type="unfinished">文字和数字的颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="280"/>
        <source>Hints and help is shown here</source>
        <translation type="unfinished">在这里显示诀窍和帮助</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="290"/>
        <source>Preview of the result. 72dpi sample.</source>
        <translation type="unfinished">预览效果。72dpi范例</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="120"/>
        <source>Co&amp;de:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
        <source>Alt+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="49"/>
        <source>Generate and include a checksum in barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="42"/>
        <source>Alt+U</source>
        <translation type="unfinished">Alt+U</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="36"/>
        <source>Include the checksum digit in the barcode text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
        <source>Insert Barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
        <source>Format</source>
        <translation type="unfinished">格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="39"/>
        <source>Incl&amp;ude Checksum Digit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="52"/>
        <source>I&amp;nclude Checksum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="65"/>
        <source>&amp;Guard Whitespace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="78"/>
        <source>&amp;Include Text in Barcode</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Biblio</name>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1419"/>
        <source>Scrapbook</source>
        <translation>寄存本</translation>
    </message>
    <message>
        <source>Scrapbooks (*.scs);;All Files (*)</source>
        <translation type="obsolete">寄存本 (*.scs);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="839"/>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1227"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1235"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1319"/>
        <source>Object</source>
        <translation>对象</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="914"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1240"/>
        <source>New Entry</source>
        <translation>新项目</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="837"/>
        <source>Rename</source>
        <translation>重命名</translation>
    </message>
    <message>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;N 新建</translation>
    </message>
    <message>
        <source>&amp;Load...</source>
        <translation type="obsolete">&amp;L 加载...</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;S 保存</translation>
    </message>
    <message>
        <source>Save &amp;As...</source>
        <translation type="obsolete">&amp;A 保存为...</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>&amp;Small</source>
        <translation type="obsolete">&amp;S 小</translation>
    </message>
    <message>
        <source>&amp;Medium</source>
        <translation type="obsolete">&amp;M 中</translation>
    </message>
    <message>
        <source>&amp;Large</source>
        <translation type="obsolete">&amp;L 大</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="obsolete">&amp;F 文件</translation>
    </message>
    <message>
        <source>&amp;Preview</source>
        <translation type="obsolete">&amp;P 预览</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="914"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1105"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1240"/>
        <source>&amp;Name:</source>
        <translation>&amp;N 名称:</translation>
    </message>
    <message>
        <source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
        <translation type="obsolete">名称 &quot;%1&quot;非唯一,请另选 
        </translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="668"/>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="698"/>
        <source>Choose a Scrapbook Directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="759"/>
        <source>Choose a Directory</source>
        <translation type="unfinished">选择一个目录</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="737"/>
        <source>Choose a scrapbook file to import</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1420"/>
        <source>Create a new scrapbook page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1421"/>
        <source>Load an existing scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1422"/>
        <source>Save the selected scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1423"/>
        <source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1424"/>
        <source>Close the selected scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="844"/>
        <source>Copy To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="845"/>
        <source>Move To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="560"/>
        <source>Main</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="562"/>
        <source>Copied Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1105"/>
        <source>New Name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="739"/>
        <source>Scrapbook (*.scs *.SCS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="833"/>
        <source>Paste to Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="889"/>
        <source>Save as...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="892"/>
        <source>Close</source>
        <translation type="unfinished">关闭</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="895"/>
        <source>Delete Contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/scrapbookpalette.cpp" line="1060"/>
        <source>Do you really want to delete all entries?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BookMView</name>
    <message>
        <source>Bookmarks</source>
        <translation type="obsolete">书签</translation>
    </message>
    <message>
        <source>Move Bookmark</source>
        <translation type="obsolete">移动书签</translation>
    </message>
    <message>
        <source>Insert Bookmark</source>
        <translation type="obsolete">插入书签</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">取消</translation>
    </message>
</context>
<context>
    <name>BookPalette</name>
    <message>
        <location filename="../../../scribus/ui/bookmarkpalette.cpp" line="51"/>
        <source>Bookmarks</source>
        <translation>书签</translation>
    </message>
</context>
<context>
    <name>ButtonIcon</name>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="29"/>
        <source>Icon Placement</source>
        <translation>图标位置</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="38"/>
        <source>Layout:</source>
        <translation>版面:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption only</source>
        <translation>仅标题</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Icon only</source>
        <translation>仅图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption below Icon</source>
        <translation>图标在标题上面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption above Icon</source>
        <translation>标题在图标上面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption right to Icon</source>
        <translation>标题在图标右边</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption left to Icon</source>
        <translation>标题在图标左边</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption overlays Icon</source>
        <translation>标题覆盖图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="50"/>
        <source>Scale:</source>
        <translation>缩放:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
        <source>Always</source>
        <translation>总是</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
        <source>When Icon is too big</source>
        <translation>当图标太大</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="56"/>
        <source>Never</source>
        <translation>从不</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="63"/>
        <source>Scale How:</source>
        <translation>如何缩放:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="66"/>
        <source>Proportional</source>
        <translation>按比例</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="67"/>
        <source>Non Proportional</source>
        <translation>不按比例</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="90"/>
        <source>Icon</source>
        <translation>图标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="117"/>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="121"/>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="124"/>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/buttonicon.cpp" line="55"/>
        <source>When Icon is too small</source>
        <translation>当图标太大</translation>
    </message>
</context>
<context>
    <name>CMSPrefs</name>
    <message>
        <source>System Profiles</source>
        <translation type="obsolete">系统配置文件</translation>
    </message>
    <message>
        <source>Rendering Intents</source>
        <translation type="obsolete">渲染意图</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefs.cpp" line="26"/>
        <source>Monitor profiles can only be changed when no documents are currently opened.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
        <source>Perceptual</source>
        <translation>感官</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefs.cpp" line="78"/>
        <source>Relative Colorimetric</source>
        <translation>相对比色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
        <source>Saturation</source>
        <translation>饱和度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefs.cpp" line="79"/>
        <source>Absolute Colorimetric</source>
        <translation>绝对比色</translation>
    </message>
    <message>
        <source>Default color profile for solid colors on the page</source>
        <translation type="obsolete">默认页面单色的颜色配置文件</translation>
    </message>
    <message>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
    </message>
    <message>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
    </message>
    <message>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation type="obsolete">Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
    </message>
    <message>
        <source>Default rendering intent for your monitor. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Default rendering intent for your monitor. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
    </message>
    <message>
        <source>Default rendering intent for your printer. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Default rendering intent for your printer. Unless you know why to change it,
Relative Colourimetric or Perceptual should be chosen.</translation>
    </message>
    <message>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation type="obsolete">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
    </message>
    <message>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation type="obsolete">在屏幕上显示可能不能正确打印的颜色的方法。
这需要非常精确的配置文件而且仅用于警示之用。</translation>
    </message>
    <message>
        <source>&amp;Activate Color Management</source>
        <translation type="obsolete">&amp;A 激活色彩管理</translation>
    </message>
    <message>
        <source>&amp;Solid Colors:</source>
        <translation type="obsolete">&amp;S 单色:</translation>
    </message>
    <message>
        <source>&amp;Monitor:</source>
        <translation type="obsolete">&amp;M 监视器:</translation>
    </message>
    <message>
        <source>P&amp;rinter:</source>
        <translation type="obsolete">&amp;R 打印机</translation>
    </message>
    <message>
        <source>M&amp;onitor:</source>
        <translation type="obsolete">&amp;O 监视器</translation>
    </message>
    <message>
        <source>Pr&amp;inter:</source>
        <translation type="obsolete">&amp;I 打印机</translation>
    </message>
    <message>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="obsolete">&amp;U 在监视器上模拟打印机</translation>
    </message>
    <message>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation type="obsolete">&amp;G 标出超出范围的颜色</translation>
    </message>
    <message>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation type="obsolete">&amp;B 使用黑点补偿</translation>
    </message>
    <message>
        <source>&amp;RGB Pictures:</source>
        <translation type="obsolete">&amp;RGB 图像:</translation>
    </message>
    <message>
        <source>&amp;CMYK Pictures:</source>
        <translation type="obsolete">&amp;CMYK 图像:</translation>
    </message>
    <message>
        <source>Default color profile for imported CMYK images</source>
        <translation type="obsolete">导入的CMYK图像的默认颜色配置文件</translation>
    </message>
    <message>
        <source>Default color profile for imported RGB images</source>
        <translation type="obsolete">导入的RGB图像的默认颜色配置文件</translation>
    </message>
    <message>
        <source>Images:</source>
        <translation type="obsolete">图像:</translation>
    </message>
</context>
<context>
    <name>CMSPrefsBase</name>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="20"/>
        <source>Form</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="32"/>
        <source>&amp;Activate Color Management</source>
        <translation type="unfinished">&amp;A 激活色彩管理</translation>
    </message>
    <message>
        <source>System Profiles</source>
        <translation type="obsolete">系统配置文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="54"/>
        <source>&amp;RGB Images:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="70"/>
        <source>Default color profile for imported RGB images</source>
        <translation type="unfinished">导入的RGB图像的默认颜色配置文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="77"/>
        <source>&amp;CMYK Images:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="93"/>
        <source>Default color profile for imported CMYK images</source>
        <translation type="unfinished">导入的CMYK图像的默认颜色配置文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="100"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="116"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="123"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="139"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="245"/>
        <source>Document Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="278"/>
        <source>Simulate printer on Screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="313"/>
        <source>Monitor Profile</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="325"/>
        <source>&amp;Monitor:</source>
        <translation type="unfinished">&amp;M 监视器:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="341"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation type="unfinished">Colour profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="146"/>
        <source>P&amp;rinter:</source>
        <translation type="unfinished">&amp;R 打印机</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="42"/>
        <source>Document Profiles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="162"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation type="unfinished">Colour profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</translation>
    </message>
    <message>
        <source>Rendering Intents</source>
        <translation type="obsolete">渲染意图</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="188"/>
        <source>Images:</source>
        <translation type="unfinished">图像:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="204"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="212"/>
        <source>Sol&amp;id Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="228"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="274"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation type="unfinished">Enable &apos;soft proofing&apos; of how your document colours will print,
based on the chosen printer profile.</translation>
    </message>
    <message>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="obsolete">&amp;U 在监视器上模拟打印机</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="285"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="289"/>
        <source>Convert all colors to printer space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="296"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation type="unfinished">在屏幕上显示可能不能正确打印的颜色的方法。
这需要非常精确的配置文件而且仅用于警示之用。</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="300"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation type="unfinished">&amp;G 标出超出范围的颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="263"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation type="unfinished">Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="176"/>
        <source>Document Rendering Intents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmsprefsbase.ui" line="267"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation type="unfinished">&amp;B 使用黑点补偿</translation>
    </message>
</context>
<context>
    <name>CMYKChoose</name>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="92"/>
        <source>Edit Color</source>
        <translation>编辑颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="116"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="661"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="680"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="899"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="906"/>
        <source>CMYK</source>
        <translation type="unfinished">CMYK</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="117"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="414"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="911"/>
        <source>RGB</source>
        <translation type="unfinished">RGB</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="118"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="764"/>
        <source>Web Safe RGB</source>
        <translation>网页安全 RGB</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="141"/>
        <source>New</source>
        <translation>新</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="158"/>
        <source>Old</source>
        <translation>旧</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="266"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="705"/>
        <source>C:</source>
        <translation type="unfinished">C:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="293"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="706"/>
        <source>M:</source>
        <translation type="unfinished">M:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="320"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="707"/>
        <source>Y:</source>
        <translation type="unfinished">Y:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="347"/>
        <source>K:</source>
        <translation type="unfinished">K:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="444"/>
        <source>Dynamic Color Bars</source>
        <translation>动态颜色条</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="442"/>
        <source>Static Color Bars</source>
        <translation>静态颜色条</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="749"/>
        <source>R:</source>
        <translation type="unfinished">R:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="750"/>
        <source>G:</source>
        <translation type="unfinished">G:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="751"/>
        <source>B:</source>
        <translation type="unfinished">B:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="288"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="315"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="342"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="369"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="702"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="703"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="704"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <source>HSV-Colormap</source>
        <translation type="obsolete">HSV-颜色表</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="101"/>
        <source>&amp;Name:</source>
        <translation>&amp;N 名称:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="111"/>
        <source>Color &amp;Model</source>
        <translation>&amp;M 颜色类型:</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">无</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="125"/>
        <source>Is Spot Color</source>
        <translation>是专色</translation>
    </message>
    <message>
        <source>Is Registration Color</source>
        <translation type="obsolete">是记录颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="1002"/>
        <source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
        <translation>你不能生成一个叫 &quot;%1&quot;的颜色。
这个是给透明色预留的名字</translation>
    </message>
    <message>
        <source>Name of the color is not unique</source>
        <translation type="obsolete">颜色名称不唯一</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="1011"/>
        <source>The name of the color already exists,
please choose another one.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="390"/>
        <source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="784"/>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="785"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="995"/>
        <source>You cannot create a color without a name
Please give it a name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cmykfw.cpp" line="196"/>
        <source>HSV Color Map</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CStyleP</name>
    <message>
        <source>Colors</source>
        <translation type="obsolete">颜色</translation>
    </message>
</context>
<context>
    <name>CWDialog</name>
    <message>
        <source>Normal Vision</source>
        <translation type="obsolete">Normal Vision</translation>
    </message>
    <message>
        <source>Protanopia (Red)</source>
        <translation type="obsolete">Protanopia (Red)</translation>
    </message>
    <message>
        <source>Deuteranopia (Green)</source>
        <translation type="obsolete">Deuteranopia (Green)</translation>
    </message>
    <message>
        <source>Tritanopia (Blue)</source>
        <translation type="obsolete">Tritanopia (Blue)</translation>
    </message>
    <message>
        <source>Full Color Blindness</source>
        <translation type="obsolete">Full Colour Blindness</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
        <source>Merging colors</source>
        <translation type="unfinished">Merging colours</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Error: </source>
        <translation type="unfinished">Error: </translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Color %1 exists already!</source>
        <translation type="unfinished">Colour %1 exists already!</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
        <source>Color %1 appended.</source>
        <translation type="unfinished">颜色 %1 被追加。</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
        <source>Now opening the color manager.</source>
        <translation type="unfinished">Now opening the colour manager.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
        <source>Color Merging</source>
        <translation type="unfinished">Colour Merging</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.cpp" line="486"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation type="unfinished">Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
        <source>Color Wheel</source>
        <translation type="unfinished">颜色转盘</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
        <source>Result Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="77"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
        <source>CMYK</source>
        <translation type="unfinished">CMYK</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="82"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
        <source>RGB</source>
        <translation type="unfinished">RGB</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="87"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
        <source>HSV</source>
        <translation type="unfinished">HSV</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
        <source>Colors of your chosen color scheme.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
        <source>Color Scheme Method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
        <source>Angle:</source>
        <translation type="unfinished">角度:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="unfinished">Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="unfinished">Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
        <source>Merge created colors into the document colors</source>
        <translation type="unfinished">Merge created colours into the document colours</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
        <source>&amp;Merge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
        <source>Alt+M</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
        <source>Replace created colors in the document colors</source>
        <translation type="unfinished">Replace created colours in the document colours</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
        <source>&amp;Replace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
        <source>Alt+R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
        <source>Leave colors untouched</source>
        <translation type="unfinished">Leave colours untouched</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;C 取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
        <source>Preview:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
        <source>Sample color scheme.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="unfinished">Simulate common vision defects here. Select type of the defect.</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
        <source>Vision Defect Type:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="342"/>
        <source>C:</source>
        <translation type="unfinished">C:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="352"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="382"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="412"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
        <source> %</source>
        <translation type="unfinished">%</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
        <source>M:</source>
        <translation type="unfinished">M:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="402"/>
        <source>Y:</source>
        <translation type="unfinished">Y:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="432"/>
        <source>K:</source>
        <translation type="unfinished">K:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="462"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
        <source>RGB:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="498"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
        <source>HSV:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
        <source>R:</source>
        <translation type="unfinished">R:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="598"/>
        <source>G:</source>
        <translation type="unfinished">G:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="625"/>
        <source>B:</source>
        <translation type="unfinished">B:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="652"/>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
        <source>CMYK:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
        <source>H:</source>
        <translation type="unfinished">H:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="784"/>
        <source>S:</source>
        <translation type="unfinished">S:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
        <source>V:</source>
        <translation type="unfinished">V:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
        <source>Document</source>
        <translation type="unfinished">文档</translation>
    </message>
</context>
<context>
    <name>CWDialogBase</name>
    <message>
        <source>Color Wheel</source>
        <translation type="obsolete">颜色转盘</translation>
    </message>
    <message>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <source>C:</source>
        <translation type="obsolete">C:</translation>
    </message>
    <message>
        <source>M:</source>
        <translation type="obsolete">M:</translation>
    </message>
    <message>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <source>K:</source>
        <translation type="obsolete">K:</translation>
    </message>
    <message>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <source>R:</source>
        <translation type="obsolete">R:</translation>
    </message>
    <message>
        <source>G:</source>
        <translation type="obsolete">G:</translation>
    </message>
    <message>
        <source>B:</source>
        <translation type="obsolete">B:</translation>
    </message>
    <message>
        <source>Document</source>
        <translation type="obsolete">文档</translation>
    </message>
    <message>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="obsolete">角度:</translation>
    </message>
    <message>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
    </message>
    <message>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">Merge created colours into the document colours</translation>
    </message>
    <message>
        <source>&amp;Replace</source>
        <translation type="obsolete">&amp;R 替代</translation>
    </message>
    <message>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">Replace created colours in the document colours</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;C 取消</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>Leave colors untouched</source>
        <translation type="obsolete">Leave colours untouched</translation>
    </message>
    <message>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">Simulate common vision defects here. Select type of the defect.</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete">%</translation>
    </message>
    <message>
        <source>HSV</source>
        <translation type="obsolete">HSV</translation>
    </message>
    <message>
        <source>H:</source>
        <translation type="obsolete">H:</translation>
    </message>
    <message>
        <source>S:</source>
        <translation type="obsolete">S:</translation>
    </message>
    <message>
        <source>V:</source>
        <translation type="obsolete">V:</translation>
    </message>
</context>
<context>
    <name>Canvas</name>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2331"/>
        <location filename="../../../scribus/canvas.cpp" line="2359"/>
        <source>X: %1
Y: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2344"/>
        <source>X: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2351"/>
        <source>Y: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2367"/>
        <source>Length: %1
Angle: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2369"/>
        <source>Width: %1
Height: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvas.cpp" line="2381"/>
        <source>Angle: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CanvasMode_EyeDropper</name>
    <message>
        <location filename="../../../scribus/canvasmode_eyedropper.cpp" line="166"/>
        <source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
        <translation type="unfinished">所选的颜色在文档的颜色组合中不存在。请为这个新颜色输入一个名字。</translation>
    </message>
    <message>
        <location filename="../../../scribus/canvasmode_eyedropper.cpp" line="169"/>
        <source>Color Not Found</source>
        <translation type="unfinished">颜色不存在</translation>
    </message>
    <message>
        <location filename="../../../scribus/canvasmode_eyedropper.cpp" line="173"/>
        <source>The name you have selected already exists. Please enter a different name for this new color.</source>
        <translation type="unfinished">你为新颜色选择的名承已经存在。请输入一个新名称。</translation>
    </message>
</context>
<context>
    <name>CanvasMode_Normal</name>
    <message>
        <location filename="../../../scribus/canvasmode_normal.cpp" line="1292"/>
        <source>All Supported Formats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/canvasmode_normal.cpp" line="1323"/>
        <source>Open</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CgmPlug</name>
    <message>
        <location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="85"/>
        <source>Importing: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="88"/>
        <source>Analyzing File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="213"/>
        <source>Group%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cgm/importcgm.cpp" line="361"/>
        <source>Generating Items</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ChTable</name>
    <message>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="obsolete">如果你长按鼠标右键,你能看到一个微缩图。插入键插入一个符号到选择的下面,删除键删除最后插入的符号。</translation>
    </message>
</context>
<context>
    <name>CharSelect</name>
    <message>
        <source>Select Character:</source>
        <translation type="obsolete">选择字符:</translation>
    </message>
    <message>
        <source>Font:</source>
        <translation type="obsolete">字体:</translation>
    </message>
    <message>
        <source>Character Class:</source>
        <translation type="obsolete">字符类:</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation type="obsolete">&amp;I 插入</translation>
    </message>
    <message>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;L 清除</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="obsolete">在文本的光标处插入字符</translation>
    </message>
    <message>
        <source>Delete the current selection(s).</source>
        <translation type="obsolete">删除当前选择</translation>
    </message>
    <message>
        <source>Close this dialog and return to text editing.</source>
        <translation type="obsolete">关闭对话窗并返回到文本编辑。</translation>
    </message>
    <message>
        <source>Full Character Set</source>
        <translation type="obsolete">完全字符集</translation>
    </message>
    <message>
        <source>Basic Latin</source>
        <translation type="obsolete">基本拉丁</translation>
    </message>
    <message>
        <source>Latin-1 Supplement</source>
        <translation type="obsolete">拉丁-1 附录</translation>
    </message>
    <message>
        <source>Latin Extended-A</source>
        <translation type="obsolete">拉丁扩展-A</translation>
    </message>
    <message>
        <source>Latin Extended-B</source>
        <translation type="obsolete">拉丁扩展-B</translation>
    </message>
    <message>
        <source>General Punctuation</source>
        <translation type="obsolete">常规标点符号</translation>
    </message>
    <message>
        <source>Super- and Subscripts</source>
        <translation type="obsolete">上标和下标</translation>
    </message>
    <message>
        <source>Currency Symbols</source>
        <translation type="obsolete">货币符号</translation>
    </message>
    <message>
        <source>Letterlike Symbols</source>
        <translation type="obsolete">类似字母符号</translation>
    </message>
    <message>
        <source>Number Forms</source>
        <translation type="obsolete">数字形式</translation>
    </message>
    <message>
        <source>Arrows</source>
        <translation type="obsolete">箭头</translation>
    </message>
    <message>
        <source>Mathematical Operators</source>
        <translation type="obsolete">数学运算符</translation>
    </message>
    <message>
        <source>Box Drawing</source>
        <translation type="obsolete">方盒绘图</translation>
    </message>
    <message>
        <source>Block Elements</source>
        <translation type="obsolete">区块元素</translation>
    </message>
    <message>
        <source>Geometric Shapes</source>
        <translation type="obsolete">几何图形</translation>
    </message>
    <message>
        <source>Miscellaneous Symbols</source>
        <translation type="obsolete">各种符号</translation>
    </message>
    <message>
        <source>Dingbats</source>
        <translation type="obsolete">装饰符</translation>
    </message>
    <message>
        <source>Small Form Variants</source>
        <translation type="obsolete">小形状变体</translation>
    </message>
    <message>
        <source>Ligatures</source>
        <translation type="obsolete">连字</translation>
    </message>
    <message>
        <source>Specials</source>
        <translation type="obsolete">特别符号</translation>
    </message>
    <message>
        <source>Greek</source>
        <translation type="obsolete">希腊字符</translation>
    </message>
    <message>
        <source>Greek Extended</source>
        <translation type="obsolete">扩展希腊字符</translation>
    </message>
    <message>
        <source>Cyrillic</source>
        <translation type="obsolete">斯拉夫字符</translation>
    </message>
    <message>
        <source>Cyrillic Supplement</source>
        <translation type="obsolete">斯拉夫字符附录</translation>
    </message>
    <message>
        <source>Arabic</source>
        <translation type="obsolete">阿拉伯字符</translation>
    </message>
    <message>
        <source>Arabic Extended A</source>
        <translation type="obsolete">阿拉伯字符扩展 A</translation>
    </message>
    <message>
        <source>Arabic Extended B</source>
        <translation type="obsolete">阿拉伯字符扩展 B</translation>
    </message>
    <message>
        <source>Hebrew</source>
        <translation type="obsolete">希伯来字符</translation>
    </message>
    <message>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="obsolete">如果你长按鼠标右键,你能看到一个微缩图。插入键插入一个符号到选择的下面,删除键删除最后插入的符号。</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="31"/>
        <source>Scribus Char Palette (*.ucp);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="226"/>
        <source>Choose a filename to open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="255"/>
        <location filename="../../../scribus/ui/charselect.cpp" line="297"/>
        <source>Error</source>
        <translation type="unfinished">错误</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="256"/>
        <source>Error reading file %1 - file is corrupted propably.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="298"/>
        <source>Cannot write file %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.ui" line="13"/>
        <source>Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Search</source>
        <translation type="obsolete">&amp;S 查找</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="306"/>
        <source>Empty the Palette?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="307"/>
        <source>You will remove all characters from this palette. Are you sure?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.ui" line="24"/>
        <source>Hide/Show Enhanced Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselect.cpp" line="272"/>
        <source>Save Quick Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharSelectEnhanced</name>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="205"/>
        <source>Full Character Set</source>
        <translation type="unfinished">完全字符集</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="210"/>
        <source>Basic Latin</source>
        <translation type="unfinished">基本拉丁</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="216"/>
        <source>Latin-1 Supplement</source>
        <translation type="unfinished">拉丁-1 附录</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="222"/>
        <source>Latin Extended-A</source>
        <translation type="unfinished">拉丁扩展-A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="228"/>
        <source>Latin Extended-B</source>
        <translation type="unfinished">拉丁扩展-B</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="234"/>
        <source>General Punctuation</source>
        <translation type="unfinished">常规标点符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="240"/>
        <source>Super- and Subscripts</source>
        <translation type="unfinished">上标和下标</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="246"/>
        <source>Currency Symbols</source>
        <translation type="unfinished">货币符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="252"/>
        <source>Letterlike Symbols</source>
        <translation type="unfinished">类似字母符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="258"/>
        <source>Number Forms</source>
        <translation type="unfinished">数字形式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="264"/>
        <source>Arrows</source>
        <translation type="unfinished">箭头</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="270"/>
        <source>Mathematical Operators</source>
        <translation type="unfinished">数学运算符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="276"/>
        <source>Box Drawing</source>
        <translation type="unfinished">方盒绘图</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="282"/>
        <source>Block Elements</source>
        <translation type="unfinished">区块元素</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="288"/>
        <source>Geometric Shapes</source>
        <translation type="unfinished">几何图形</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="294"/>
        <source>Miscellaneous Symbols</source>
        <translation type="unfinished">各种符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="300"/>
        <source>Dingbats</source>
        <translation type="unfinished">装饰符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="306"/>
        <source>Small Form Variants</source>
        <translation type="unfinished">小形状变体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="312"/>
        <source>Ligatures</source>
        <translation type="unfinished">连字</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="318"/>
        <source>Specials</source>
        <translation type="unfinished">特别符号</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="324"/>
        <source>Greek</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="330"/>
        <source>Greek Extended</source>
        <translation type="unfinished">扩展希腊字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="336"/>
        <source>Cyrillic</source>
        <translation type="unfinished">斯拉夫字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="342"/>
        <source>Cyrillic Supplement</source>
        <translation type="unfinished">斯拉夫字符附录</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="348"/>
        <source>Arabic</source>
        <translation type="unfinished">阿拉伯字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="354"/>
        <source>Arabic Extended A</source>
        <translation type="unfinished">阿拉伯字符扩展 A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="360"/>
        <source>Arabic Extended B</source>
        <translation type="unfinished">阿拉伯字符扩展 B</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.cpp" line="366"/>
        <source>Hebrew</source>
        <translation type="unfinished">希伯来字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="13"/>
        <source>Enhanced Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="19"/>
        <source>&amp;Font:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="45"/>
        <source>C&amp;haracter Class:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="77"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="96"/>
        <source>Insert &amp;Code:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="131"/>
        <source>Glyphs to Insert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="171"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="unfinished">在文本的光标处插入字符</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="174"/>
        <source>&amp;Insert</source>
        <translation type="unfinished">&amp;I 插入</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="184"/>
        <source>Delete the current selection(s).</source>
        <translation type="unfinished">删除当前选择</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="187"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">&amp;L 清除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/charselectenhanced.ui" line="106"/>
        <source>Type in a four digit Unicode value directly here</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharStyleComboBox</name>
    <message>
        <location filename="../../../scribus/ui/spalette.cpp" line="94"/>
        <location filename="../../../scribus/ui/spalette.cpp" line="107"/>
        <location filename="../../../scribus/ui/spalette.cpp" line="118"/>
        <source>No Style</source>
        <translation type="unfinished">没有样式</translation>
    </message>
</context>
<context>
    <name>CharTable</name>
    <message>
        <source>Delete</source>
        <translation type="obsolete">删除</translation>
    </message>
</context>
<context>
    <name>CharTableView</name>
    <message>
        <location filename="../../../scribus/chartableview.cpp" line="22"/>
        <source>Delete</source>
        <translation type="unfinished">删除</translation>
    </message>
</context>
<context>
    <name>CheckDocument</name>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="660"/>
        <source>Glyphs missing</source>
        <translation>符号丢失</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="661"/>
        <source>Text overflow</source>
        <translation>文本溢出</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="662"/>
        <source>Object is not on a Page</source>
        <translation>对象不在页面上</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="663"/>
        <source>Missing Image</source>
        <translation>图像丢失</translation>
    </message>
    <message>
        <source>Image has a DPI-Value less than %1 DPI</source>
        <translation type="obsolete">图像的DPI-值低于 %1 DPI</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="667"/>
        <source>Object has transparency</source>
        <translation>对象有透明</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="668"/>
        <source>Object is a PDF Annotation or Field</source>
        <translation>对象是一个PDF注释或域</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="669"/>
        <source>Object is a placed PDF</source>
        <translation>对象是个嵌入的PDF</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="379"/>
        <source>Document</source>
        <translation>文档</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="381"/>
        <source>No Problems found</source>
        <translation>没发现问题</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="548"/>
        <source>Page </source>
        <translation>页 </translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="612"/>
        <source>Free Objects</source>
        <translation>自由对象</translation>
    </message>
    <message>
        <source>Problems found</source>
        <translation type="obsolete">发现问题</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="645"/>
        <source>Preflight Verifier</source>
        <translation>印前检验器</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="647"/>
        <source>Items</source>
        <translation>项目</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="647"/>
        <source>Problems</source>
        <translation>问题</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="652"/>
        <source>Current Profile:</source>
        <translation>当前配置文件:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="622"/>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="653"/>
        <source>&amp;Ignore Errors</source>
        <translation>&amp;I 忽略错误</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="654"/>
        <source>Check again</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="670"/>
        <source>Image is GIF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="382"/>
        <source>OK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="412"/>
        <source>Transparency used</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="415"/>
        <source>Blendmode used</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="422"/>
        <source>Layer &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="671"/>
        <source>Annotation uses a non TrueType font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="656"/>
        <source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="657"/>
        <source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="658"/>
        <source>Rerun the document scan to check corrections you may have made</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="664"/>
        <source>Empty Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="393"/>
        <source>Layers</source>
        <translation type="unfinished">图层</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="424"/>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="493"/>
        <source>Issue(s): %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="435"/>
        <source>Master Pages</source>
        <translation type="unfinished">母页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="648"/>
        <source>Layer</source>
        <translation type="unfinished">图层</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="665"/>
        <source>Image resolution below %1 DPI,
currently %2 x %3 DPI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/checkDocument.cpp" line="666"/>
        <source>Image resolution above %1 DPI,
currently %2 x %3 DPI</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ChooseStyles</name>
    <message>
        <source>Choose Styles</source>
        <translation type="obsolete">选择样式</translation>
    </message>
    <message>
        <source>Available Styles</source>
        <translation type="obsolete">可用样式</translation>
    </message>
</context>
<context>
    <name>CollectForOutput</name>
    <message>
        <location filename="../../../scribus/collect4output.cpp" line="55"/>
        <source>Choose a Directory</source>
        <translation>选择一个目录</translation>
    </message>
    <message>
        <location filename="../../../scribus/collect4output.cpp" line="68"/>
        <source>Cannot create directory:
%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/collect4output.cpp" line="83"/>
        <source>Collecting...</source>
        <translation>收集中...</translation>
    </message>
    <message>
        <source>Warning</source>
        <translation type="obsolete">警告</translation>
    </message>
    <message>
        <location filename="../../../scribus/collect4output.cpp" line="88"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation>不能收集所有文件来输出文件:
%1</translation>
    </message>
    <message>
        <location filename="../../../scribus/collect4output.cpp" line="102"/>
        <source>Cannot collect the file: 
%1</source>
        <translation>不能收集文件: 
%1</translation>
    </message>
</context>
<context>
    <name>ColorManager</name>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="54"/>
        <source>Colors</source>
        <translation type="unfinished">颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="80"/>
        <source>&amp;Import</source>
        <translation type="unfinished">&amp;I 导入</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="82"/>
        <source>&amp;New</source>
        <translation type="unfinished">&amp;N 新建</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="84"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">&amp;E 编辑</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="88"/>
        <source>D&amp;uplicate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="91"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;D 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="96"/>
        <source>&amp;Remove Unused</source>
        <translation type="unfinished">&amp;R 清除未用的</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="103"/>
        <source>Color Sets</source>
        <translation type="unfinished">颜色组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="109"/>
        <source>Current Color Set:</source>
        <translation type="unfinished">当前颜色组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="140"/>
        <source>&amp;Save Color Set</source>
        <translation type="unfinished">&amp;S 保存颜色组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="159"/>
        <source>Choose a color set to load</source>
        <translation type="unfinished">选择要载入的颜色组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="160"/>
        <source>Save the current color set</source>
        <translation type="unfinished">保存当前颜色组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="165"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation type="unfinished">从当前文档颜色组合清除未用颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="167"/>
        <source>Import colors to the current set from an existing document</source>
        <translation type="unfinished">从现存文档中导入颜色组合到当前组合</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="168"/>
        <source>Create a new color within the current set</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="169"/>
        <source>Edit the currently selected color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="170"/>
        <source>Make a copy of the currently selected color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="171"/>
        <source>Delete the currently selected color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="172"/>
        <source>Make the current colorset the default color set</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="192"/>
        <source>&amp;Name:</source>
        <translation type="unfinished">&amp;N 名称:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="192"/>
        <source>Choose a Name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">文档 (*.sla *.sla.gz *.scd *.scd.gz);;全部文件 (*)</translation>
    </message>
    <message>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">文档 (*.sla *.scd);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="355"/>
        <source>Copy of %1</source>
        <translation type="unfinished">Copy %1</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="366"/>
        <source>New Color</source>
        <translation type="unfinished">新颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="323"/>
        <source>Information</source>
        <translation type="unfinished">信息</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="323"/>
        <source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import. 
Not all files have DSC conformant comments where the color descriptions are located.
 This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="173"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="313"/>
        <source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/colorm.cpp" line="314"/>
        <source>Import Colors</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorWheel</name>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
        <source>Monochromatic</source>
        <translation>单色的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
        <source>Analogous</source>
        <translation>相似的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="141"/>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="224"/>
        <source>Complementary</source>
        <translation>补充的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
        <source>Split Complementary</source>
        <translation>拆分补充的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
        <source>Triadic</source>
        <translation>三合一的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
        <source>Tetradic (Double Complementary)</source>
        <translation>四分的(双补充的)</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
        <source>Base Color</source>
        <translation>基本颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="206"/>
        <source>Monochromatic Light</source>
        <translation>单色亮</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="209"/>
        <source>Monochromatic Dark</source>
        <translation>单色暗</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="216"/>
        <source>1st. Analogous</source>
        <translation>第一个相似的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="217"/>
        <source>2nd. Analogous</source>
        <translation>第二个相似的</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="231"/>
        <source>1st. Split</source>
        <translation>第一个拆分</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="232"/>
        <source>2nd. Split</source>
        <translation>第二个拆分</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="233"/>
        <source>3rd. Split</source>
        <translation>第三个拆分</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="234"/>
        <source>4th. Split</source>
        <translation>第四个拆分</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="241"/>
        <source>1st. Triadic</source>
        <translation type="unfinished">1st. Triadic</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="242"/>
        <source>2nd. Triadic</source>
        <translation type="unfinished">2nd. Triadic</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="249"/>
        <source>1st. Tetradic (base opposite)</source>
        <translation type="unfinished">1st. Tetradic (base opposite)</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="250"/>
        <source>2nd. Tetradic (angle)</source>
        <translation type="unfinished">2nd. Tetradic (angle)</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="251"/>
        <source>3rd. Tetradic (angle opposite)</source>
        <translation type="unfinished">3rd. Tetradic (angle opposite)</translation>
    </message>
</context>
<context>
    <name>ColorWheelDialog</name>
    <message>
        <source>Color Wheel</source>
        <translation type="obsolete">颜色转盘</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">颜色</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">名称</translation>
    </message>
    <message>
        <source>C</source>
        <translation type="obsolete">C</translation>
    </message>
    <message>
        <source>M</source>
        <translation type="obsolete">M</translation>
    </message>
    <message>
        <source>Y</source>
        <translation type="obsolete">Y</translation>
    </message>
    <message>
        <source>K</source>
        <translation type="obsolete">K</translation>
    </message>
    <message>
        <source>Select Method:</source>
        <translation type="obsolete">选择方式:</translation>
    </message>
    <message>
        <source>Angle (0 - 90 degrees):</source>
        <translation type="obsolete">角度 (0 - 90 度):</translation>
    </message>
    <message>
        <source>&amp;Merge Colors</source>
        <translation type="obsolete">&amp;M 混合颜色</translation>
    </message>
    <message>
        <source>&amp;Replace Colors</source>
        <translation type="obsolete">&amp;R 替代颜色</translation>
    </message>
    <message>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">Merge created colours into the document colours</translation>
    </message>
    <message>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">Replace created colours in the document colours</translation>
    </message>
    <message>
        <source>Leave colors untouched</source>
        <translation type="obsolete">Leave colours untouched</translation>
    </message>
    <message>
        <source>Merging colors</source>
        <translation type="obsolete">Merging colours</translation>
    </message>
    <message>
        <source>Error: </source>
        <translation type="obsolete">Error: </translation>
    </message>
    <message>
        <source>Now opening the color manager.</source>
        <translation type="obsolete">Now opening the colour manager.</translation>
    </message>
    <message>
        <source>Color Merging</source>
        <translation type="obsolete">Colour Merging</translation>
    </message>
    <message>
        <source>Normal Vision</source>
        <translation type="obsolete">Normal Vision</translation>
    </message>
    <message>
        <source>Full Color Blindness</source>
        <translation type="obsolete">Full Colour Blindness</translation>
    </message>
    <message>
        <source>Vision Defect:</source>
        <translation type="obsolete">Vision Defect:</translation>
    </message>
    <message>
        <source>Cr&amp;eate color...</source>
        <translation type="obsolete">Cr&amp;eate colour...</translation>
    </message>
    <message>
        <source>&amp;Import existing color...</source>
        <translation type="obsolete">&amp;Import existing colour...</translation>
    </message>
    <message>
        <source>&amp;Merge colors</source>
        <translation type="obsolete">&amp;Merge colours</translation>
    </message>
    <message>
        <source>&amp;Replace colors</source>
        <translation type="obsolete">&amp;Replace colours</translation>
    </message>
    <message>
        <source>E&amp;xit</source>
        <translation type="obsolete">E&amp;xit</translation>
    </message>
    <message>
        <source>C&amp;olor</source>
        <translation type="obsolete">C&amp;olour</translation>
    </message>
    <message>
        <source>New Color</source>
        <translation type="obsolete">New Colour</translation>
    </message>
    <message>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">Difference between the selected value and the counted ones. Refer to documentation for more information.</translation>
    </message>
    <message>
        <source>Click the wheel to get the base color. It is hue in HSV mode.</source>
        <translation type="obsolete">Click the wheel to get the base colour. It is hue in HSV mode.</translation>
    </message>
    <message>
        <source>Sample color scheme</source>
        <translation type="obsolete">Sample colour scheme</translation>
    </message>
    <message>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">Select one of the methods to create a colour scheme. Refer to documentation for more information.</translation>
    </message>
    <message>
        <source>Colors of your chosen color scheme</source>
        <translation type="obsolete">你所选颜色组合的颜色</translation>
    </message>
    <message>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">Simulate common vision defects here. Select type of the defect.</translation>
    </message>
    <message>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation type="obsolete">Unable to find the requested colour. You have probably selected black, gray or white. There is no way to process this colour.</translation>
    </message>
    <message>
        <source>Color %1 exists already!</source>
        <translation type="obsolete">Colour %1 exists already!</translation>
    </message>
    <message>
        <source>Color %1 appended.</source>
        <translation type="obsolete">颜色 %1 被追加。</translation>
    </message>
    <message>
        <source>C&amp;olor Components...</source>
        <translation type="obsolete">C&amp;olour Components...</translation>
    </message>
    <message>
        <source>Protanopia (Red)</source>
        <translation type="obsolete">Protanopia (Red)</translation>
    </message>
    <message>
        <source>Deuteranopia (Green)</source>
        <translation type="obsolete">Deuteranopia (Green)</translation>
    </message>
    <message>
        <source>Tritanopia (Blue)</source>
        <translation type="obsolete">Tritanopia (Blue)</translation>
    </message>
</context>
<context>
    <name>ColorWheelPlugin</name>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="48"/>
        <source>&amp;Color Wheel...</source>
        <translation>&amp;C 颜色转盘...</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
        <source>Color setting helper</source>
        <translation>Colour setting helper</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/colorwheel/colorwheel.cpp" line="66"/>
        <source>Color selector with color theory included.</source>
        <translation>Colour selector with colour theory included.</translation>
    </message>
</context>
<context>
    <name>CommonStrings</name>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="247"/>
        <source>&amp;Apply</source>
        <translation>&amp;A 应用</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="250"/>
        <source>&amp;Cancel</source>
        <translation>&amp;C 取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="253"/>
        <source>None</source>
        <translation type="unfinished">无</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="257"/>
        <source>&amp;OK</source>
        <translation>&amp;O 确认</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="260"/>
        <source>&amp;Save</source>
        <translation>&amp;S 保存</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="263"/>
        <source>Warning</source>
        <translation>警告</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="254"/>
        <source>None</source>
        <comment>color name</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="289"/>
        <source>Custom</source>
        <comment>CommonStrings, custom page size</comment>
        <translation type="unfinished">自定义</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="295"/>
        <source>Single Page</source>
        <translation type="unfinished">单页</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="296"/>
        <source>Double Sided</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="297"/>
        <source>3-Fold</source>
        <translation type="unfinished">3折</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="298"/>
        <source>4-Fold</source>
        <translation type="unfinished">4折</translation>
    </message>
    <message>
        <source>Left Page</source>
        <translation type="obsolete">左页</translation>
    </message>
    <message>
        <source>Middle</source>
        <translation type="obsolete">中间</translation>
    </message>
    <message>
        <source>Middle Left</source>
        <translation type="obsolete">中左</translation>
    </message>
    <message>
        <source>Middle Right</source>
        <translation type="obsolete">中右</translation>
    </message>
    <message>
        <source>Right Page</source>
        <translation type="obsolete">右页</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="334"/>
        <source>Monday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="335"/>
        <source>Tuesday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="336"/>
        <source>Wednesday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="337"/>
        <source>Thursday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="338"/>
        <source>Friday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="339"/>
        <source>Saturday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="340"/>
        <source>Sunday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="341"/>
        <source>January</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="342"/>
        <source>February</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="343"/>
        <source>March</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="344"/>
        <source>April</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="345"/>
        <source>May</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="346"/>
        <source>June</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="347"/>
        <source>July</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="348"/>
        <source>August</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="349"/>
        <source>September</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="350"/>
        <source>October</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="351"/>
        <source>November</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="352"/>
        <source>December</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="265"/>
        <source>Yes</source>
        <translation type="unfinished">是</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="266"/>
        <source>No</source>
        <translation type="unfinished">否</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="267"/>
        <source>&amp;Yes</source>
        <translation type="unfinished">&amp;Y 是</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="268"/>
        <source>&amp;No</source>
        <translation type="unfinished">&amp;N 否</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="277"/>
        <source>PDF 3D Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="305"/>
        <source>Left Page</source>
        <comment>Left page location</comment>
        <translation type="unfinished">左页</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="306"/>
        <source>Middle</source>
        <comment>Middle page location</comment>
        <translation type="unfinished">中间</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="307"/>
        <source>Middle Left</source>
        <comment>Middle Left page location</comment>
        <translation type="unfinished">中左</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="308"/>
        <source>Middle Right</source>
        <comment>Middle Right page location</comment>
        <translation type="unfinished">中右</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="309"/>
        <source>Right Page</source>
        <comment>Right page location</comment>
        <translation type="unfinished">右页</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="312"/>
        <source>Normal</source>
        <comment>Default single master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="314"/>
        <source>Normal Left</source>
        <comment>Default left master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="316"/>
        <source>Normal Middle</source>
        <comment>Default middle master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="318"/>
        <source>Normal Right</source>
        <comment>Default right master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="360"/>
        <source>Normal Vision</source>
        <comment>Color Blindness - Normal Vision</comment>
        <translation type="unfinished">Normal Vision</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="361"/>
        <source>Protanopia (Red)</source>
        <comment>Color Blindness - Red Color Blind</comment>
        <translation type="unfinished">Protanopia (Red)</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="362"/>
        <source>Deuteranopia (Green)</source>
        <comment>Color Blindness - Greed Color Blind</comment>
        <translation type="unfinished">Deuteranopia (Green)</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="363"/>
        <source>Tritanopia (Blue)</source>
        <comment>Color Blindness - Blue Color Blind</comment>
        <translation type="unfinished">Tritanopia (Blue)</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="364"/>
        <source>Full Color Blindness</source>
        <comment>Color Blindness - Full Color Blindness</comment>
        <translation type="unfinished">Full Colour Blindness</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="366"/>
        <source>Custom: </source>
        <comment>Custom Tab Fill Option</comment>
        <translation type="unfinished">自定义:</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="320"/>
        <source>Solid Line</source>
        <translation type="unfinished">实线</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="321"/>
        <source>Dashed Line</source>
        <translation type="unfinished">虚线</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="322"/>
        <source>Dotted Line</source>
        <translation type="unfinished">点线</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="323"/>
        <source>Dash Dot Line</source>
        <translation type="unfinished">虚点线</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="324"/>
        <source>Dash Dot Dot Line</source>
        <translation type="unfinished">虚点点线</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="368"/>
        <source>None</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="369"/>
        <source>Left Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="370"/>
        <source>Right Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="371"/>
        <source>Left Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="372"/>
        <source>Right Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="373"/>
        <source>Default</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="376"/>
        <source>Min. Word Tracking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="377"/>
        <source>Max. Word Tracking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="380"/>
        <source>Min. Glyph Extension</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="381"/>
        <source>Max. Glyph Extension</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="354"/>
        <source>RGB</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">RGB</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="355"/>
        <source>CMYK</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">CMYK</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="356"/>
        <source>Grayscale</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">灰度</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="357"/>
        <source>Duotone</source>
        <comment>Colorspace</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="358"/>
        <source>Unknown</source>
        <comment>Colorspace (Unknown)</comment>
        <translation type="unfinished">未知</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="385"/>
        <source>PostScript</source>
        <translation type="unfinished">PostScript</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="270"/>
        <source>Text Frame</source>
        <translation type="unfinished">文本框</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="271"/>
        <source>Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="272"/>
        <source>Line</source>
        <translation type="unfinished">线条</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="273"/>
        <source>Polygon</source>
        <translation type="unfinished">多边形</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="274"/>
        <source>Polyline</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="275"/>
        <source>Text on a Path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="278"/>
        <source>Multiple</source>
        <comment>Multiple frame types</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="279"/>
        <source>PDF Push Button</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="280"/>
        <source>PDF Text Field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="281"/>
        <source>PDF Check Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="282"/>
        <source>PDF Combo Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="283"/>
        <source>PDF List Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="284"/>
        <source>PDF Text Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="285"/>
        <source>PDF Link Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="394"/>
        <source>PostScript Level 1</source>
        <translation type="unfinished">PostScript 级别 1</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="396"/>
        <source>PostScript Level 2</source>
        <translation type="unfinished">PostScript 级别 2</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="398"/>
        <source>PostScript Level 3</source>
        <translation type="unfinished">PostScript 级别 3</translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="400"/>
        <source>Windows GDI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="276"/>
        <source>Render Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="329"/>
        <source>Default Paragraph Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="330"/>
        <source>Default Character Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/commonstrings.cpp" line="331"/>
        <source>Default Line Style</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ContextMenu</name>
    <message>
        <location filename="../../../scribus/ui/contextmenu.cpp" line="214"/>
        <source>Preview Settings</source>
        <translation type="unfinished">预览设置</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/contextmenu.cpp" line="428"/>
        <source>Paste File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/contextmenu.cpp" line="461"/>
        <source>Delete Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/contextmenu.cpp" line="186"/>
        <source>Paste Image from Clipboard</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageBase</name>
    <message>
        <location filename="../../../scribus/ui/copypagetomasterpage.ui" line="16"/>
        <source>Convert Page to Master Page</source>
        <translation type="unfinished">把页转换为母页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/copypagetomasterpage.ui" line="24"/>
        <source>Name:</source>
        <translation type="unfinished">名称:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/copypagetomasterpage.ui" line="39"/>
        <source>Copy Applied Master Page Items</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageDialog</name>
    <message>
        <location filename="../../../scribus/ui/copypagetomasterpagedialog.cpp" line="18"/>
        <source>New Master Page %1</source>
        <translation type="unfinished">新建母页 %1</translation>
    </message>
</context>
<context>
    <name>Cpalette</name>
    <message>
        <source>Normal</source>
        <translation type="obsolete">普通</translation>
    </message>
    <message>
        <source>Horizontal Gradient</source>
        <translation type="obsolete">Horizontal Gradient</translation>
    </message>
    <message>
        <source>Vertical Gradient</source>
        <translation type="obsolete">Vertical Gradient</translation>
    </message>
    <message>
        <source>Diagonal Gradient</source>
        <translation type="obsolete">Diagonal Gradient</translation>
    </message>
    <message>
        <source>Cross Diagonal Gradient</source>
        <translation type="obsolete">Cross Diagonal Gradient</translation>
    </message>
    <message>
        <source>Radial Gradient</source>
        <translation type="obsolete">Radial Gradient</translation>
    </message>
    <message>
        <source>Opacity:</source>
        <translation type="obsolete">Opacity:</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">None</translation>
    </message>
    <message>
        <source>Shade:</source>
        <translation type="obsolete">Shade:</translation>
    </message>
    <message>
        <source>Edit Line Color Properties</source>
        <translation type="obsolete">Edit Line Colour Properties</translation>
    </message>
    <message>
        <source>Edit Fill Color Properties</source>
        <translation type="obsolete">Edit Fill Colour Properties</translation>
    </message>
    <message>
        <source>Saturation of color</source>
        <translation type="obsolete">Saturation of colour</translation>
    </message>
    <message>
        <source>Normal or gradient fill method</source>
        <translation type="obsolete">Normal or gradient fill method</translation>
    </message>
    <message>
        <source>Set the transparency for the color selected</source>
        <translation type="obsolete">Set the transparency for the colour selected</translation>
    </message>
    <message>
        <source>Free linear Gradient</source>
        <translation type="obsolete">Free linear Gradient</translation>
    </message>
    <message>
        <source>Free radial Gradient</source>
        <translation type="obsolete">Free radial Gradient</translation>
    </message>
    <message>
        <source>X1:</source>
        <translation type="obsolete">X1:</translation>
    </message>
    <message>
        <source>Y1:</source>
        <translation type="obsolete">Y1:</translation>
    </message>
    <message>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <source>X2:</source>
        <translation type="obsolete">X2:</translation>
    </message>
    <message>
        <source>Y2:</source>
        <translation type="obsolete">Y2:</translation>
    </message>
    <message>
        <source>Move Vector</source>
        <translation type="obsolete">Move Vector</translation>
    </message>
    <message>
        <source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
        <translation type="obsolete">Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</translation>
    </message>
    <message>
        <source>Blend Mode:</source>
        <translation type="obsolete">混合模式:</translation>
    </message>
    <message>
        <source>Darken</source>
        <translation type="obsolete">更暗</translation>
    </message>
    <message>
        <source>Lighten</source>
        <translation type="obsolete">更亮</translation>
    </message>
    <message>
        <source>Multiply</source>
        <translation type="obsolete">倍增</translation>
    </message>
    <message>
        <source>Screen</source>
        <translation type="obsolete">屏幕</translation>
    </message>
    <message>
        <source>Overlay</source>
        <translation type="obsolete">重叠</translation>
    </message>
    <message>
        <source>Hard Light</source>
        <translation type="obsolete">强光</translation>
    </message>
    <message>
        <source>Soft Light</source>
        <translation type="obsolete">柔光</translation>
    </message>
    <message>
        <source>Difference</source>
        <translation type="obsolete">差分</translation>
    </message>
    <message>
        <source>Exlusion</source>
        <translation type="obsolete">排除</translation>
    </message>
    <message>
        <source>Color Dodge</source>
        <translation type="obsolete">颜色模糊</translation>
    </message>
    <message>
        <source>Color Burn</source>
        <translation type="obsolete">颜色焦灼</translation>
    </message>
    <message>
        <source>Hue</source>
        <translation type="obsolete">色调</translation>
    </message>
    <message>
        <source>Saturation</source>
        <translation type="obsolete">饱和度</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">颜色</translation>
    </message>
    <message>
        <source>Luminosity</source>
        <translation type="obsolete">亮度</translation>
    </message>
    <message>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <source>Exclusion</source>
        <translation type="obsolete">排除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cpalette.cpp" line="329"/>
        <location filename="../../../scribus/ui/cpalette.cpp" line="332"/>
        <source>Custom</source>
        <translation type="unfinished">自定义</translation>
    </message>
</context>
<context>
    <name>CreateRange</name>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="13"/>
        <source>Create Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="54"/>
        <source>Number of Pages in Document:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="64"/>
        <source>Doc Page Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="112"/>
        <source>Basic Range Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="136"/>
        <source>Range of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="160"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">&amp;L 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="163"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="186"/>
        <source>Move &amp;Down</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="189"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="196"/>
        <source>Move &amp;Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="199"/>
        <source>Alt+U</source>
        <translation type="unfinished">Alt+U</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="218"/>
        <source>Add a Range of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="242"/>
        <source>Consecutive Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="252"/>
        <source>Even Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="259"/>
        <source>From:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="291"/>
        <source>To:</source>
        <translation type="unfinished">到:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="334"/>
        <source>&amp;Add To Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="337"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="362"/>
        <source>Odd Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="372"/>
        <source>Comma Separated List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="383"/>
        <source>Advanced Reordering</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="439"/>
        <source>Page Order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="449"/>
        <source>Sample Page Order:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="478"/>
        <source>Page Group Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="525"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;O 确认</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="528"/>
        <source>Alt+O</source>
        <translation type="unfinished">Alt+O</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="535"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;C 取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/createrange.ui" line="538"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
</context>
<context>
    <name>CreateRangeBase</name>
    <message>
        <source>To:</source>
        <translation type="obsolete">到:</translation>
    </message>
    <message>
        <source>Alt+U</source>
        <translation type="obsolete">Alt+U</translation>
    </message>
    <message>
        <source>De&amp;lete</source>
        <translation type="obsolete">&amp;L 删除</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;O 确认</translation>
    </message>
    <message>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;C 取消</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>CsvDialog</name>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="27"/>
        <source>CSV Importer Options</source>
        <translation type="unfinished">CSV Importer Options</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="37"/>
        <source>Field delimiter:</source>
        <translation type="unfinished">Field delimiter:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="44"/>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="89"/>
        <source>(TAB)</source>
        <translation type="unfinished">(TAB)</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="53"/>
        <source>Value delimiter:</source>
        <translation type="unfinished">Value delimiter:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="68"/>
        <source>First row is a header</source>
        <translation type="unfinished">First row is a header</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="76"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="79"/>
        <source>Cancel</source>
        <translation type="unfinished">Cancel</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">None</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
        <source>None</source>
        <comment>delimiter</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CupsOptions</name>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="52"/>
        <source>Printer Options</source>
        <translation type="unfinished">打印机选项</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="63"/>
        <source>Option</source>
        <translation type="unfinished">选项</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="64"/>
        <source>Value</source>
        <translation type="unfinished">数值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="133"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="143"/>
        <source>Page Set</source>
        <translation type="unfinished">页面套</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="140"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="147"/>
        <source>All Pages</source>
        <translation type="unfinished">全部页面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="141"/>
        <source>Even Pages only</source>
        <translation type="unfinished">偶数页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="142"/>
        <source>Odd Pages only</source>
        <translation type="unfinished">奇数页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="150"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="160"/>
        <source>Mirror</source>
        <translation type="unfinished">镜像</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">否</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">是</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="167"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="177"/>
        <source>Orientation</source>
        <translation type="unfinished">页面方向</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="174"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="181"/>
        <source>Portrait</source>
        <translation type="unfinished">竖式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="175"/>
        <source>Landscape</source>
        <translation type="unfinished">横式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="184"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="197"/>
        <source>N-Up Printing</source>
        <translation type="unfinished">N-Up 打印</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="191"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="201"/>
        <source>Page per Sheet</source>
        <translation type="unfinished">Page per Sheet</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="192"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="193"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="194"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="195"/>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="196"/>
        <source>Pages per Sheet</source>
        <translation type="unfinished">Pages per Sheet</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/cupsoptions.cpp" line="224"/>
        <source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
        <translation type="unfinished">This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</translation>
    </message>
</context>
<context>
    <name>CurveWidget</name>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="415"/>
        <source>Open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="415"/>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="453"/>
        <source>Curve Files &quot;*.scu&quot; (*.scu *.SCU);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="453"/>
        <source>Save as</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="487"/>
        <source>Cannot write the file: 
%1</source>
        <translation type="unfinished">不能写入文件: 
%1</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="513"/>
        <source>Inverts the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="514"/>
        <source>Resets the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="515"/>
        <source>Switches between linear and cubic interpolation of the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="516"/>
        <source>Loads a curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/curvewidget.cpp" line="517"/>
        <source>Saves this curve</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CustomFDialog</name>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="343"/>
        <source>Encoding:</source>
        <translation type="unfinished">编码:</translation>
    </message>
    <message>
        <source>Moves to your Document Directory.
This can be set in the Preferences.</source>
        <translation type="obsolete">移动到你的文档目录。这个可以在首选项里设定。
</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="285"/>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="315"/>
        <source>&amp;Compress File</source>
        <translation>&amp;C 压缩文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="294"/>
        <source>&amp;Include Fonts</source>
        <translation>&amp;I 包括字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="262"/>
        <source>Show Preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="296"/>
        <source>&amp;Include Color Profiles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="263"/>
        <source>Show a preview and information for the selected file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="330"/>
        <source>Compress the Scribus document on save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="332"/>
        <source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="334"/>
        <source>Include color profiles when collecting files for the document</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CvgPlug</name>
    <message>
        <location filename="../../../scribus/plugins/import/cvg/importcvg.cpp" line="78"/>
        <source>Importing: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cvg/importcvg.cpp" line="81"/>
        <source>Analyzing File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cvg/importcvg.cpp" line="209"/>
        <source>Group%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/cvg/importcvg.cpp" line="337"/>
        <source>Generating Items</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CwSetColor</name>
    <message>
        <source>Set Color Components</source>
        <translation type="obsolete">设置颜色组成</translation>
    </message>
    <message>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <source>HSV</source>
        <translation type="obsolete">HSV</translation>
    </message>
    <message>
        <source>H:</source>
        <translation type="obsolete">H:</translation>
    </message>
    <message>
        <source>S:</source>
        <translation type="obsolete">S:</translation>
    </message>
    <message>
        <source>V:</source>
        <translation type="obsolete">V:</translation>
    </message>
    <message>
        <source>R:</source>
        <translation type="obsolete">R:</translation>
    </message>
    <message>
        <source>G:</source>
        <translation type="obsolete">G:</translation>
    </message>
    <message>
        <source>B:</source>
        <translation type="obsolete">B:</translation>
    </message>
    <message>
        <source>C:</source>
        <translation type="obsolete">C:</translation>
    </message>
    <message>
        <source>M:</source>
        <translation type="obsolete">M:</translation>
    </message>
    <message>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <source>K:</source>
        <translation type="obsolete">K:</translation>
    </message>
    <message>
        <source>Set &amp;RGB</source>
        <translation type="obsolete">Set &amp;RGB</translation>
    </message>
    <message>
        <source>Set C&amp;MYK</source>
        <translation type="obsolete">Set C&amp;MYK</translation>
    </message>
    <message>
        <source>Set &amp;HSV</source>
        <translation type="obsolete">Set &amp;HSV</translation>
    </message>
</context>
<context>
    <name>DashEditor</name>
    <message>
        <location filename="../../../scribus/ui/dasheditor.cpp" line="363"/>
        <source>Value:</source>
        <translation type="unfinished">数值:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/dasheditor.cpp" line="364"/>
        <source>Offset:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeferredTask</name>
    <message>
        <location filename="../../../scribus/deferredtask.cpp" line="82"/>
        <source>Cancelled by user</source>
        <translation>被用户取消</translation>
    </message>
</context>
<context>
    <name>DelColor</name>
    <message>
        <location filename="../../../scribus/ui/dcolor.cpp" line="28"/>
        <source>Delete Color</source>
        <translation>删除颜色</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">无</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/dcolor.cpp" line="36"/>
        <source>Delete Color:</source>
        <translation>删除颜色:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/dcolor.cpp" line="45"/>
        <source>Replace With:</source>
        <translation>替换上:</translation>
    </message>
</context>
<context>
    <name>DelPages</name>
    <message>
        <location filename="../../../scribus/ui/delpages.cpp" line="17"/>
        <source>Delete Pages</source>
        <translation>删除页</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/delpages.cpp" line="34"/>
        <source>to:</source>
        <translation>到:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/delpages.cpp" line="26"/>
        <source>Delete From:</source>
        <translation>删除来自:</translation>
    </message>
</context>
<context>
    <name>DelStyle</name>
    <message>
        <source>Delete Style</source>
        <translation type="obsolete">删除样式</translation>
    </message>
    <message>
        <source>Delete Style:</source>
        <translation type="obsolete">删除样式:</translation>
    </message>
    <message>
        <source>Replace With:</source>
        <translation type="obsolete">替换上:</translation>
    </message>
    <message>
        <source>No Style</source>
        <translation type="obsolete">没有样式</translation>
    </message>
</context>
<context>
    <name>DocIm</name>
    <message>
        <location filename="../../../scribus/plugins/gettext/docim/docim.cpp" line="160"/>
        <source>Importing failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/docim/docim.cpp" line="161"/>
        <source>Importing Word document failed 
%1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocInfos</name>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="30"/>
        <source>Document Information</source>
        <translation>文档信息</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="39"/>
        <source>&amp;Title:</source>
        <translation>&amp;T 标题:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="46"/>
        <source>&amp;Author:</source>
        <translation>&amp;A 作者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="53"/>
        <source>&amp;Subject:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="61"/>
        <source>&amp;Keywords:</source>
        <translation>&amp;K 关键词:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="69"/>
        <source>Descri&amp;ption:</source>
        <translation>&amp;P 描述:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="82"/>
        <source>P&amp;ublisher:</source>
        <translation>&amp;U 出版人:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="89"/>
        <source>&amp;Contributors:</source>
        <translation>&amp;C 贡献者:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="97"/>
        <source>Dat&amp;e:</source>
        <translation>&amp;E 日期:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="104"/>
        <source>T&amp;ype:</source>
        <translation>&amp;Y 类型:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="111"/>
        <source>F&amp;ormat:</source>
        <translation>&amp;O 格式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="118"/>
        <source>Identi&amp;fier:</source>
        <translation>&amp;F 身份标记</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="125"/>
        <source>&amp;Source:</source>
        <translation>&amp;S 来源:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="132"/>
        <source>&amp;Language:</source>
        <translation>&amp;L 语言:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="139"/>
        <source>&amp;Relation:</source>
        <translation>&amp;R 关系:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="146"/>
        <source>Co&amp;verage:</source>
        <translation>&amp;V 范围:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="153"/>
        <source>Ri&amp;ghts:</source>
        <translation>&amp;G 权利:</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="161"/>
        <source>Further &amp;Information</source>
        <translation>&amp;I 进一步信息</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="171"/>
        <source>A person or organisation responsible for making the document available</source>
        <translation>负责制作该文档的一个人或组织</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="172"/>
        <source>A person or organisation responsible for making contributions to the content of the document</source>
        <translation>负责为该文档内容作出贡献的一个人或组织</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="173"/>
        <source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
        <translation>一个和文档存在时的某事件相关联的日期,以ISO 8601标准表示,格式是年-月-日</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="174"/>
        <source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
        <translation>文档内容的性质或流派,例如类别,功能或流派等等</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="176"/>
        <source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
        <translation>一个在特定的上下文里对文档的清晰参考,例如ISBN或URI</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="177"/>
        <source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
        <translation>一个关于当前文档怎么起源的参考,例如ISBN或URI</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="179"/>
        <source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
        <translation>一个关于相关文档的参考,兴许使用一个正式的身份标记,例如ISBN或者URI</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="180"/>
        <source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
        <translation>文档内容的区域或者范围,可能的话包括地点,时间和管辖范围</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="181"/>
        <source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
        <translation>关于在文档里或对文档拥有的权力,例如版权,专利或者商标</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="160"/>
        <source>Documen&amp;t</source>
        <translation>&amp;T 文档</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="167"/>
        <source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>制作此文档内容的主要人或组织。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="168"/>
        <source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>赋予文档的名称。这个项目可以被嵌入到Scribus文档以及PDF文档中的元数据中备考。</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="169"/>
        <source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation>文档内容的说明。这个项目是文档的简单描述或者摘要。这个在输出PDF文档时将被嵌入</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="170"/>
        <source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation>文档内容的主题。这个项目是你想嵌入到PDF文档中的关键词,以便帮助查找和检索PDF文档</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="175"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation>文档的物理或数码的证明。媒体类型或者尺寸将值得关注。RFC2045,RFC2046在此也有用</translation>
    </message>
    <message>
        <location filename="../../../scribus/docinfo.cpp" line="178"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation>书写文档内容所用的语言,一般上是可能带横杠后缀和一个ISO-3166国家代码(如en-GB,fr-CH)的ISO-639语言编码</translation>
    </message>
</context>
<context>
    <name>DocSections</name>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="72"/>
        <source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
        <translation>添加一个页码区域到文档。这个新区域将被添加到当前选中的区域后面</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="73"/>
        <source>Delete the currently selected section.</source>
        <translation>删除当前选中的区域</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="87"/>
        <source>1, 2, 3, ...</source>
        <translation type="unfinished">1, 2, 3, ...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="87"/>
        <source>i, ii, iii, ...</source>
        <translation type="unfinished">i, ii, iii, ...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="87"/>
        <source>I, II, III, ...</source>
        <translation type="unfinished">I, II, III, ...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="87"/>
        <source>a, b, c, ...</source>
        <translation type="unfinished">a, b, c, ...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="87"/>
        <source>A, B, C, ...</source>
        <translation type="unfinished">A, B, C, ...</translation>
    </message>
    <message>
        <source>Name: Optional name for section eg. Index&lt;br/&gt;Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;From: The page index for this section to start at.&lt;br/&gt;To: The page index for this section to stop at.&lt;br/&gt;Style: Select the page number style to be used.&lt;br/&gt;Start: The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b.</source>
        <translation type="obsolete">名称:区域的可选名称,例如:Index&lt;br/&gt;Shown: Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;From: The page index for this section to start at.&lt;br/&gt;To: The page index for this section to stop at.&lt;br/&gt;Style: Select the page number style to be used.&lt;br/&gt;Start: The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b.</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="74"/>
        <source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="201"/>
        <source>Page Number Out Of Bounds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.cpp" line="201"/>
        <source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="13"/>
        <source>Document Sections</source>
        <translation type="unfinished">文档区域</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="83"/>
        <source>&amp;Add</source>
        <translation type="unfinished">&amp;A 添加</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="86"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="93"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;D 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="96"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="32"/>
        <source>Name</source>
        <translation type="unfinished">名称</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="37"/>
        <source>Shown</source>
        <translation type="unfinished">显示</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="42"/>
        <source>From</source>
        <translation type="unfinished">来自</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="47"/>
        <source>To</source>
        <translation type="unfinished">To</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="52"/>
        <source>Style</source>
        <translation type="unfinished">样式</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docsections.ui" line="57"/>
        <source>Start</source>
        <translation type="unfinished">开始</translation>
    </message>
</context>
<context>
    <name>DocSectionsBase</name>
    <message>
        <source>Document Sections</source>
        <translation type="obsolete">文档区域</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">名称</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">来自</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">To</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">样式</translation>
    </message>
    <message>
        <source>Start</source>
        <translation type="obsolete">开始</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;A 添加</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;D 删除</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>Shown</source>
        <translation type="obsolete">显示</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributes</name>
    <message>
        <source>None</source>
        <translation type="obsolete">无</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="17"/>
        <source>Relates To</source>
        <translation>相关于</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="17"/>
        <source>Is Parent Of</source>
        <translation>父级于</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="17"/>
        <source>Is Child Of</source>
        <translation>子级于</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="19"/>
        <source>Text Frames</source>
        <translation>文本框</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="19"/>
        <source>Image Frames</source>
        <translation>图片框</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="21"/>
        <source>Boolean</source>
        <translation>布尔型</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="21"/>
        <source>Integer</source>
        <translation>整数</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="21"/>
        <source>String</source>
        <translation>字串</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="21"/>
        <source>Real Number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="17"/>
        <source>None</source>
        <comment>relationship</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="19"/>
        <source>None</source>
        <comment>auto add</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.cpp" line="21"/>
        <source>None</source>
        <comment>types</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="13"/>
        <source>Document Item Attributes</source>
        <translation type="unfinished">文档项目属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="82"/>
        <source>&amp;Add</source>
        <translation type="unfinished">&amp;A 添加</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="85"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="92"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;C 复制</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="95"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="102"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;D 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="105"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="112"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">&amp;L 清除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="115"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="26"/>
        <source>Name</source>
        <translation type="unfinished">名称</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="31"/>
        <source>Type</source>
        <translation type="unfinished">类型</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="36"/>
        <source>Value</source>
        <translation type="unfinished">数值</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="41"/>
        <source>Parameter</source>
        <translation type="unfinished">参数</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="46"/>
        <source>Relationship</source>
        <translation type="unfinished">关系</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="51"/>
        <source>Relationship To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/docitemattrprefs.ui" line="56"/>
        <source>Auto Add To</source>
        <translation type="unfinished">自动添加到</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributesBase</name>
    <message>
        <source>Document Item Attributes</source>
        <translation type="obsolete">文档项目属性</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">名称</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">类型</translation>
    </message>
    <message>
        <source>Value</source>
        <translation type="obsolete">数值</translation>
    </message>
    <message>
        <source>Parameter</source>
        <translation type="obsolete">参数</translation>
    </message>
    <message>
        <source>Relationship</source>
        <translation type="obsolete">关系</translation>
    </message>
    <message>
        <source>Relationship To</source>
        <translation type="obsolete">有关系于</translation>
    </message>
    <message>
        <source>Auto Add To</source>
        <translation type="obsolete">自动添加到</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;A 添加</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;C 复制</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;D 删除</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;L 清除</translation>
    </message>
    <message>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
</context>
<context>
    <name>EPSPlug</name>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="476"/>
        <source>Importing File:
%1
failed!</source>
        <translation>导入文件:
%1
失败!</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="477"/>
        <source>Fatal Error</source>
        <translation>致命错误</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="875"/>
        <source>Error</source>
        <translation type="unfinished">错误</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="81"/>
        <source>Analyzing PostScript:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="482"/>
        <source>Generating Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="874"/>
        <source>Converting of %1 images failed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="278"/>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="705"/>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="741"/>
        <source>Group%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/import/ps/importps.cpp" line="78"/>
        <source>Importing: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EditStyle</name>
    <message>
        <source>Edit Style</source>
        <translation type="obsolete">编辑样式</translation>
    </message>
    <message>
        <source>Character</source>
        <translation type="obsolete">字符</translation>
    </message>
    <message>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">无</translation>
    </message>
    <message>
        <source>Line Spacing</source>
        <translation type="obsolete">行距</translation>
    </message>
    <message>
        <source>Name of your paragraph style</source>
        <translation type="obsolete">Name of your paragraph style</translation>
    </message>
    <message>
        <source>Font of selected text or object</source>
        <translation type="obsolete">所选文本或对象的字体</translation>
    </message>
    <message>
        <source>Font Size</source>
        <translation type="obsolete">字体大小</translation>
    </message>
    <message>
        <source>Color of text fill</source>
        <translation type="obsolete">文本填充颜色</translation>
    </message>
    <message>
        <source>Color of text stroke</source>
        <translation type="obsolete">文本轮廓颜色</translation>
    </message>
    <message>
        <source>Determines the overall height, in line numbers, of the Drop Caps</source>
        <translation type="obsolete">Determines the overall height, in line numbers, of the Drop Caps</translation>
    </message>
    <message>
        <source>Spacing above the paragraph</source>
        <translation type="obsolete">段落上方的距离</translation>
    </message>
    <message>
        <source>Spacing below the paragraph</source>
        <translation type="obsolete">段落下方的距离</translation>
    </message>
    <message>
        <source>Tabulators and Indentation</source>
        <translation type="obsolete">制表符和缩进</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;N 名称:</translation>
    </message>
    <message>
        <source>&amp;Lines:</source>
        <translation type="obsolete">&amp;L 行:</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete">%</translation>
    </message>
    <message>
        <source>Distances</source>
        <translation type="obsolete">距离</translation>
    </message>
    <message>
        <source>Fixed Linespacing</source>
        <translation type="obsolete">固定行距</translation>
    </message>
    <message>
        <source>Automatic Linespacing</source>
        <translation type="obsolete">自动行距</translation>
    </message>
    <message>
        <source>Align to Baseline Grid</source>
        <translation type="obsolete">和基线网格对齐</translation>
    </message>
    <message>
        <source>Drop Caps</source>
        <translation type="obsolete">首字下沉</translation>
    </message>
    <message>
        <source>Distance from Text:</source>
        <translation type="obsolete">到文本距离:</translation>
    </message>
    <message>
        <source>Preview of the Paragraph Style</source>
        <translation type="obsolete">预览段落样式</translation>
    </message>
    <message>
        <source>Determines the gap between the DropCaps and the Text</source>
        <translation type="obsolete">确定下沉字和文本的间隔</translation>
    </message>
    <message>
        <source>Toggles sample text of this paragraph style</source>
        <translation type="obsolete">切换这个段落样式的文本范例</translation>
    </message>
    <message>
        <source>Name of the style is not unique</source>
        <translation type="obsolete">这个样式的名称非唯一</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">背景</translation>
    </message>
    <message>
        <source>Auto</source>
        <translation type="obsolete">自动</translation>
    </message>
</context>
<context>
    <name>EditToolBar</name>
    <message>
        <location filename="../../../scribus/ui/edittoolbar.cpp" line="29"/>
        <source>Edit</source>
        <translation type="unfinished">编辑</translation>
    </message>
</context>
<context>
    <name>Editor</name>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="30"/>
        <source>Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="36"/>
        <source>&amp;New</source>
        <translation>&amp;N 新建</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="39"/>
        <source>&amp;Open...</source>
        <translation>&amp;O 打开...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="41"/>
        <source>Save &amp;As...</source>
        <translation>&amp;A 另存为...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="43"/>
        <source>&amp;Save and Exit</source>
        <translation>&amp;S 保存并退出</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="45"/>
        <source>&amp;Exit without Saving</source>
        <translation>&amp;E 不保存退出</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="47"/>
        <source>&amp;Undo</source>
        <translation>&amp;U 撤销动作</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="50"/>
        <source>&amp;Redo</source>
        <translation>&amp;R 重复动作</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="52"/>
        <source>Cu&amp;t</source>
        <translation>&amp;T 剪切</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="55"/>
        <source>&amp;Copy</source>
        <translation>&amp;C 复制</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="58"/>
        <source>&amp;Paste</source>
        <translation>&amp;P 粘贴</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="61"/>
        <source>C&amp;lear</source>
        <translation>&amp;L 清除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="63"/>
        <source>&amp;Get Field Names</source>
        <translation>&amp;G 获取域名称</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="65"/>
        <source>&amp;File</source>
        <translation>&amp;F 文件</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="72"/>
        <source>&amp;Edit</source>
        <translation>&amp;E 编辑</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="111"/>
        <location filename="../../../scribus/ui/editor.cpp" line="127"/>
        <source>JavaScripts (*.js);;All Files (*)</source>
        <translation>JavaScripts (*.js);;全部文件 (*)</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="37"/>
        <source>Ctrl+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="48"/>
        <source>Ctrl+Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="53"/>
        <source>Ctrl+X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="56"/>
        <source>Ctrl+C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/editor.cpp" line="59"/>
        <source>Ctrl-V</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EffectsDialog</name>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="45"/>
        <source>Image Effects</source>
        <translation>图像效果</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="83"/>
        <source>Options:</source>
        <translation>选项:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="100"/>
        <source>Color:</source>
        <translation>颜色:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="111"/>
        <source>Shade:</source>
        <translation>阴影:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="127"/>
        <source>Brightness:</source>
        <translation>亮度:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="149"/>
        <source>Contrast:</source>
        <translation>对比:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="171"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="200"/>
        <source>Radius:</source>
        <translation>半径:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="182"/>
        <source>Value:</source>
        <translation>数值:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="218"/>
        <source>Posterize:</source>
        <translation>海报效果化:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="457"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="474"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="502"/>
        <source>Available Effects</source>
        <translation>可用效果</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="461"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="543"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="781"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="843"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1298"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1420"/>
        <source>Blur</source>
        <translation>模糊</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="462"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="528"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="766"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="837"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1249"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1398"/>
        <source>Brightness</source>
        <translation>亮度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="463"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="519"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="761"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="847"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="902"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="989"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1389"/>
        <source>Colorize</source>
        <translation>颜色化</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="467"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="533"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="771"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="839"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1265"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1404"/>
        <source>Contrast</source>
        <translation>对比</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="468"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="514"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="756"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="835"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="985"/>
        <source>Grayscale</source>
        <translation>灰度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="470"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="509"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="751"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="833"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="987"/>
        <source>Invert</source>
        <translation>反转</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="471"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="554"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="789"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="845"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1310"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1433"/>
        <source>Posterize</source>
        <translation>海报效果化</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="472"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="538"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="776"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="841"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1281"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1410"/>
        <source>Sharpen</source>
        <translation>锐化</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="484"/>
        <source>&gt;&gt;</source>
        <translation type="unfinished">&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="488"/>
        <source>&lt;&lt;</source>
        <translation type="unfinished">&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="499"/>
        <source>Effects in use</source>
        <translation>使用中效果</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="619"/>
        <source>OK</source>
        <translation>确认</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="623"/>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="237"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="287"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="353"/>
        <source>Color 1:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="258"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="307"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="373"/>
        <source>Color 2:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="327"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="393"/>
        <source>Color 3:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="413"/>
        <source>Color 4:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="464"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="559"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="794"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="858"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="902"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1006"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1439"/>
        <source>Duotone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="465"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="568"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="799"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="869"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="902"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1064"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1475"/>
        <source>Tritone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="466"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="577"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="804"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="880"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="902"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1145"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1526"/>
        <source>Quadtone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="469"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="586"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="809"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="891"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1326"/>
        <location filename="../../../scribus/ui/effectsdialog.cpp" line="1592"/>
        <source>Curves</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExportBitmap</name>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
        <source>File exists. Overwrite?</source>
        <translation type="unfinished">文件存在。覆盖吗?</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="205"/>
        <source>exists already. Overwrite?</source>
        <translation type="unfinished">已经存在。覆盖吗?</translation>
    </message>
    <message>
        <source>All</source>
        <translation type="obsolete">全部</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="191"/>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="218"/>
        <source>Save as Image</source>
        <translation type="unfinished">另存为图像</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="191"/>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="192"/>
        <source>Insufficient memory for this image size.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="218"/>
        <location filename="../../../scribus/plugins/pixmapexport/export.cpp" line="219"/>
        <source>Error writing the output file(s).</source>
        <translation type="unfinished">写入输出文件错误。</translation>
    </message>
</context>
<context>
    <name>ExportForm</name>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="224"/>
        <source>&amp;All pages</source>
        <translation>&amp;A 全部页</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="127"/>
        <source>Change the output directory</source>
        <translation>更改输出目录</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="126"/>
        <source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
        <translation>输出目录-保存你的图像的地方。输出文件的名称将会是
&apos;文件名-页码.文件类型&apos;</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="120"/>
        <source>Export only the current page</source>
        <translation>仅导出当前页</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="125"/>
        <source>Available export formats</source>
        <translation>可用导出格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="80"/>
        <source>Choose a Export Directory</source>
        <translation>选择一个导出目录</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="166"/>
        <source>C&amp;hange...</source>
        <translation>&amp;H 更改...</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="153"/>
        <source>&amp;Export to Directory:</source>
        <translation>&amp;E 导出到目录:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="54"/>
        <source>Image &amp;Type:</source>
        <translation>&amp;T 图像类型:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="64"/>
        <source>&amp;Quality:</source>
        <translation>&amp;Q 质量:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="13"/>
        <source>Export as Image(s)</source>
        <translation>作为图像导出</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="25"/>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="74"/>
        <source>&amp;Resolution:</source>
        <translation>&amp;R 分辨率:</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="94"/>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="126"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="110"/>
        <source> dpi</source>
        <translation type="unfinished"> dpi</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="175"/>
        <source>Range</source>
        <translation>范围</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="197"/>
        <source>&amp;Current page</source>
        <translation>&amp;C 当前页</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="217"/>
        <source>&amp;Range</source>
        <translation type="unfinished">&amp;R 范围</translation>
    </message>
    <message>
        <source>C</source>
        <translation type="obsolete">C</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
        <source>Export a range of pages</source>
        <translation>导出一个页面范围</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation>插入一个以逗号隔开的记号,这里记号可以是*以代表所有页,1-5代表页范围或者一个单独的页码。
</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
        <source>Export all pages</source>
        <translation>输出所有页</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="121"/>
        <source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
        <translation>图像的分辨率。
如果图像用于屏幕显示,用72 dpi</translation>
    </message>
    <message>
        <source>The quality of your images - 100% is the best, 1% the lowest quality</source>
        <translation type="obsolete">图像的质量-100%为最好,1%为最低质量</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="84"/>
        <source>&amp;Size:</source>
        <translation>&amp;S 尺寸</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="122"/>
        <source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
        <translation>图像尺寸。100%为没有更改,200%是两倍大,以此类推</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="44"/>
        <source>Image size in Pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/exportform.ui" line="37"/>
        <source>TextLabel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="123"/>
        <source>The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use &apos;Automatic&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/pixmapexport/dialog.cpp" line="124"/>
        <source>Automatic</source>
        <translation type="unfinished">自动 </translation>
    </message>
</context>
<context>
    <name>ExtImageProps</name>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="39"/>
        <source>Extended Image Properties</source>
        <translation>图像扩展属性</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="50"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="68"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="102"/>
        <source>Normal</source>
        <translation>普通</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="51"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="69"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="103"/>
        <source>Darken</source>
        <translation>更暗</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="52"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="70"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="104"/>
        <source>Lighten</source>
        <translation>更亮</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="53"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="71"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="105"/>
        <source>Hue</source>
        <translation>色调</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="54"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="72"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="106"/>
        <source>Saturation</source>
        <translation>饱和度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="55"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="73"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="107"/>
        <source>Color</source>
        <translation>颜色</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="56"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="74"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="108"/>
        <source>Luminosity</source>
        <translation>亮度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="57"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="75"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="109"/>
        <source>Multiply</source>
        <translation>倍增</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="58"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="76"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="110"/>
        <source>Screen</source>
        <translation>屏幕</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="59"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="77"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="111"/>
        <source>Dissolve</source>
        <translation>溶解</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="60"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="78"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="112"/>
        <source>Overlay</source>
        <translation>重叠</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="61"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="79"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="113"/>
        <source>Hard Light</source>
        <translation>强光</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="62"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="80"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="114"/>
        <source>Soft Light</source>
        <translation>柔光</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="63"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="81"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="115"/>
        <source>Difference</source>
        <translation>差分</translation>
    </message>
    <message>
        <source>Exlusion</source>
        <translation type="obsolete">排除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="65"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="83"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="117"/>
        <source>Color Dodge</source>
        <translation>颜色模糊</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="66"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="84"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="118"/>
        <source>Color Burn</source>
        <translation>颜色焦灼</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="98"/>
        <source>Blend Mode:</source>
        <translation>混合模式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="121"/>
        <source>Opacity:</source>
        <translation>透明度:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="127"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="133"/>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">背景</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="214"/>
        <source>Layers</source>
        <translation>图层</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="267"/>
        <source>Don&apos;t use any Path</source>
        <translation>不用任何路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="269"/>
        <source>Paths</source>
        <translation>路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="64"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="82"/>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="116"/>
        <source>Exclusion</source>
        <translation>排除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/extimageprops.cpp" line="276"/>
        <source>Live Preview</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FDialogPreview</name>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="186"/>
        <source>Size:</source>
        <translation>尺寸</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="204"/>
        <source>Title:</source>
        <translation>标题:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="207"/>
        <source>No Title</source>
        <translation>无标题</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="209"/>
        <source>Author:</source>
        <translation>作者</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="190"/>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="212"/>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="217"/>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="219"/>
        <source>Scribus Document</source>
        <translation>Scribus文档</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="187"/>
        <source>Resolution:</source>
        <translation>分辨率</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="187"/>
        <source>DPI</source>
        <translation type="unfinished">DPI</translation>
    </message>
    <message>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <source>Grayscale</source>
        <translation type="obsolete">灰度</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="193"/>
        <source>Colorspace:</source>
        <translation>颜色模式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/customfdialog.cpp" line="214"/>
        <source>File Format:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FileLoader</name>
    <message>
        <location filename="../../../scribus/fileloader.cpp" line="617"/>
        <source>Some fonts used by this document have been substituted:</source>
        <translation>这个文件使用的一些字体被替代为:</translation>
    </message>
    <message>
        <location filename="../../../scribus/fileloader.cpp" line="621"/>
        <source> was replaced by: </source>
        <translation>已被替代成:</translation>
    </message>
</context>
<context>
    <name>FileToolBar</name>
    <message>
        <location filename="../../../scribus/ui/filetoolbar.cpp" line="31"/>
        <source>File</source>
        <translation type="unfinished">文件</translation>
    </message>
</context>
<context>
    <name>FontComboH</name>
    <message>
        <location filename="../../../scribus/ui/fontcombo.cpp" line="148"/>
        <source>Family:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontcombo.cpp" line="149"/>
        <source>Style:</source>
        <translation type="unfinished">样式:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontcombo.cpp" line="151"/>
        <source>Font Family of Selected Text or Text Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontcombo.cpp" line="152"/>
        <source>Font Style of Selected Text or Text Frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontListModel</name>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="63"/>
        <source>Font Name</source>
        <translation type="unfinished">字体名称</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="65"/>
        <source>Use Font</source>
        <translation type="unfinished">使用字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="67"/>
        <source>Family</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="69"/>
        <source>Style</source>
        <translation type="unfinished">样式</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="71"/>
        <source>Variant</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="73"/>
        <source>Type</source>
        <translation type="unfinished">类型</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="75"/>
        <source>Format</source>
        <translation type="unfinished">格式</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="77"/>
        <source>Embed in PostScript</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="79"/>
        <source>Subset</source>
        <translation type="unfinished">子集</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="81"/>
        <source>Access</source>
        <translation type="unfinished">Access</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="83"/>
        <source>Used in Doc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="85"/>
        <source>Path to Font File</source>
        <translation type="unfinished">字体文件的路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="144"/>
        <source>Unknown</source>
        <comment>font type</comment>
        <translation type="unfinished">未知</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="157"/>
        <source>Unknown</source>
        <comment>font format</comment>
        <translation type="unfinished">未知</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="164"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="unfinished">用户</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="165"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="unfinished">系统</translation>
    </message>
    <message>
        <location filename="../../../scribus/fontlistmodel.cpp" line="190"/>
        <source>Click to change the value</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPrefs</name>
    <message>
        <source>Available Fonts</source>
        <translation type="obsolete">可用字体</translation>
    </message>
    <message>
        <source>Font Substitutions</source>
        <translation type="obsolete">字体替代</translation>
    </message>
    <message>
        <source>Additional Paths</source>
        <translation type="obsolete">其他路径</translation>
    </message>
    <message>
        <source>Font Name</source>
        <translation type="obsolete">字体名称</translation>
    </message>
    <message>
        <source>Replacement</source>
        <translation type="obsolete">替代</translation>
    </message>
    <message>
        <source>Choose a Directory</source>
        <translation type="obsolete">选择一个目录</translation>
    </message>
    <message>
        <source>&amp;Available Fonts</source>
        <translation type="obsolete">&amp;A 可用字体</translation>
    </message>
    <message>
        <source>Font &amp;Substitutions</source>
        <translation type="obsolete">&amp;S 字体替代</translation>
    </message>
    <message>
        <source>Additional &amp;Paths</source>
        <translation type="obsolete">&amp;P 其他路径</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;D 删除</translation>
    </message>
    <message>
        <source>C&amp;hange...</source>
        <translation type="obsolete">&amp;H 更改...</translation>
    </message>
    <message>
        <source>A&amp;dd...</source>
        <translation type="obsolete">&amp;D 添加...</translation>
    </message>
    <message>
        <source>&amp;Remove</source>
        <translation type="obsolete">&amp;R 移除</translation>
    </message>
    <message>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">字体名称</translation>
    </message>
    <message>
        <source>Use Font</source>
        <comment>font preview</comment>
        <translation type="obsolete">使用字体</translation>
    </message>
    <message>
        <source>Embed in:</source>
        <comment>font preview</comment>
        <translation type="obsolete">嵌入在:</translation>
    </message>
    <message>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">子集</translation>
    </message>
    <message>
        <source>Path to Font File</source>
        <comment>font preview</comment>
        <translation type="obsolete">字体文件的路径</translation>
    </message>
    <message>
        <source>PostScript</source>
        <translation type="obsolete">PostScript</translation>
    </message>
    <message>
        <source>Font search paths can only be set in Preferences, and only when there is no document currently open. Close any open documents, then use Edit-&gt;Settings to change the font search path.</source>
        <translation type="obsolete">字体搜索路径只能在首选项中设定,而且要在没有打开任何文档的情况下。关闭所有文档,然后用编辑-设置来更改字体搜索路径。</translation>
    </message>
    <message>
        <source>Use Font</source>
        <translation type="obsolete">使用字体</translation>
    </message>
    <message>
        <source>Subset</source>
        <translation type="obsolete">子集</translation>
    </message>
    <message>
        <source>Path to Font File</source>
        <translation type="obsolete">字体文件的路径</translation>
    </message>
</context>
<context>
    <name>FontPrefsTab</name>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="48"/>
        <source>Available Fonts</source>
        <translation type="unfinished">可用字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="48"/>
        <source>Font Substitutions</source>
        <translation type="unfinished">字体替代</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="48"/>
        <source>Additional Paths</source>
        <translation type="unfinished">其他路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="58"/>
        <source>&amp;Available Fonts</source>
        <translation type="unfinished">&amp;A 可用字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="66"/>
        <source>Font Name</source>
        <translation type="unfinished">字体名称</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="67"/>
        <source>Replacement</source>
        <translation type="unfinished">替代</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="82"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;D 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="88"/>
        <source>Font &amp;Substitutions</source>
        <translation type="unfinished">&amp;S 字体替代</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="107"/>
        <source>C&amp;hange...</source>
        <translation type="unfinished">&amp;H 更改...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="109"/>
        <source>A&amp;dd...</source>
        <translation type="unfinished">&amp;D 添加...</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="111"/>
        <source>&amp;Remove</source>
        <translation type="unfinished">&amp;R 移除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="128"/>
        <source>Font search paths can only be set in File &gt; Preferences, and only when there is no document currently open. Close any open documents, then use File &gt; Preferences &gt; Fonts to change the font search path.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="135"/>
        <source>Additional &amp;Paths</source>
        <translation type="unfinished">&amp;P 其他路径</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="222"/>
        <location filename="../../../scribus/ui/fontprefs.cpp" line="247"/>
        <source>Choose a Directory</source>
        <translation type="unfinished">选择一个目录</translation>
    </message>
</context>
<context>
    <name>FontPreview</name>
    <message>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">字体名称</translation>
    </message>
    <message>
        <source>Doc</source>
        <comment>font preview</comment>
        <translation type="obsolete">文件</translation>
    </message>
    <message>
        <source>Type</source>
        <comment>font preview</comment>
        <translation type="obsolete">类型</translation>
    </message>
    <message>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">子集</translation>
    </message>
    <message>
        <source>Access</source>
        <comment>font preview</comment>
        <translation type="obsolete">Access</translation>
    </message>
    <message>
        <source>Font Size:</source>
        <translation type="obsolete">字体尺寸:</translation>
    </message>
    <message>
        <source>Fonts Preview</source>
        <comment>font preview</comment>
        <translation type="obsolete">字体预览</translation>
    </message>
    <message>
        <source>Alt+O</source>
        <comment>font preview</comment>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <source>Quick Search: </source>
        <translation type="obsolete">快速查找:</translation>
    </message>
    <message>
        <source>&amp;Search</source>
        <translation type="obsolete">&amp;S 查找</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <comment>font preview</comment>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <comment>font preview</comment>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>Append selected font into Style, Font menu</source>
        <comment>font preview</comment>
        <translation type="obsolete">追加选中的字体到样式,字体菜单</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.cpp" line="111"/>
        <source>Leave preview</source>
        <comment>font preview</comment>
        <translation>Leave 预览</translation>
    </message>
    <message>
        <source>Typing the text here provides quick searching in the font names. E.g. &apos;bold&apos; shows all fonts with Bold in name. Searching is case insensitive.</source>
        <translation type="obsolete">在此输入字以便快速查找字体名称。例如&apos;粗体&apos;显示所带有粗体的名称。查找大小写有别</translation>
    </message>
    <message>
        <source>Start searching</source>
        <translation type="obsolete">开始查找</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.cpp" line="113"/>
        <source>Size of the selected font</source>
        <translation>所选字体的尺寸</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Woven silk pyjamas exchanged for blue quartz</source>
        <comment>font preview</comment>
        <translation type="unfinished">Woven silk pyjamas exchanged for blue quartz</translation>
    </message>
    <message>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="obsolete">用户</translation>
    </message>
    <message>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="obsolete">系统</translation>
    </message>
    <message>
        <source>&amp;Append</source>
        <translation type="obsolete">&amp;A 追加</translation>
    </message>
    <message>
        <source>Font Name</source>
        <translation type="obsolete">字体名称</translation>
    </message>
    <message>
        <source>Doc</source>
        <translation type="obsolete">文件</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">类型</translation>
    </message>
    <message>
        <source>Subset</source>
        <translation type="obsolete">子集</translation>
    </message>
    <message>
        <source>Access</source>
        <translation type="obsolete">Access</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="13"/>
        <source>Fonts Preview</source>
        <translation type="unfinished">字体预览</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="19"/>
        <source>&amp;Quick Search:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="80"/>
        <source>&amp;Font Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="103"/>
        <source>Text</source>
        <translation type="unfinished">文本</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="113"/>
        <source>Sample text to display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="123"/>
        <source>Se&amp;t</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="126"/>
        <source>Alt+T</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="133"/>
        <source>Reset the text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="167"/>
        <source>&amp;Close</source>
        <translation type="unfinished">&amp;C 关闭</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="170"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.cpp" line="112"/>
        <source>Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="136"/>
        <source>&amp;Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
        <source>Show Extended Font Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreview.ui" line="120"/>
        <source>Set the preview text</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPreviewBase</name>
    <message>
        <source>Fonts Preview</source>
        <translation type="obsolete">字体预览</translation>
    </message>
    <message>
        <source>&amp;Search</source>
        <translation type="obsolete">&amp;S 查找</translation>
    </message>
    <message>
        <source>Font Name</source>
        <translation type="obsolete">字体名称</translation>
    </message>
    <message>
        <source>Doc</source>
        <translation type="obsolete">文件</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">类型</translation>
    </message>
    <message>
        <source>Subset</source>
        <translation type="obsolete">子集</translation>
    </message>
    <message>
        <source>Access</source>
        <translation type="obsolete">Access</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">文本</translation>
    </message>
    <message>
        <source>&amp;Append</source>
        <translation type="obsolete">&amp;A 追加</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>FontPreviewPlugin</name>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
        <source>&amp;Font Preview...</source>
        <translation>&amp;F 字体预览...</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="66"/>
        <source>Font Preview dialog</source>
        <translation>字体预览窗口</translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="67"/>
        <source>Sorting, searching and browsing available fonts.</source>
        <translation>排列,查找和浏览可用的字体。</translation>
    </message>
</context>
<context>
    <name>FontReplaceDialog</name>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="30"/>
        <source>Font Substitution</source>
        <translation>字体替代</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="45"/>
        <source>Original Font</source>
        <translation>原始字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="46"/>
        <source>Substitution Font</source>
        <translation>替代字体</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="72"/>
        <source>Make these substitutions permanent</source>
        <translation>让这些替代永久有效</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="40"/>
        <source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
        <translation>这个文档包括一些你的系统没有安装的字体,请为它们选择合适的替代字体。按取消将停止载入文档。</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="83"/>
        <source>Cancels these font substitutions and stops loading the document.</source>
        <translation>取消这些字体替代并停止载入文档。</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="84"/>
        <source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit &gt; Preferences &gt; Fonts.</source>
        <translation>启用这个就告诉Scribus永久性地在以后的版面使用替代字体来代替不存在的字体。这个可以在编辑-首选项-字体中被改变或逆转。</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/fontreplacedialog.cpp" line="85"/>
        <source>If you select OK, then save, these substitutions are made permanent in the document.</source>
        <translation>如果你选择确认然后保存,这些替代将永久保留到文档中。</translation>
    </message>
</context>
<context>
    <name>FontSelect</name>
    <message>
        <location filename="../../../scribus/plugins/gettext/xtgim/fontselectdialog.cpp" line="35"/>
        <source>Select Alternate Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/plugins/gettext/xtgim/fontselectdialog.cpp" line="44"/>
        <source>Font</source>
        <translation type="unfinished">字体</translation>
    </message>
</context>
<context>
    <name>GradientEditor</name>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.cpp" line="161"/>
        <source>Position:</source>
        <translation>位置:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.cpp" line="162"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <source>Here you can add, change or remove Color-Stops.</source>
        <translation type="obsolete">这里你可以增加,更改或者删除颜色节点</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.cpp" line="170"/>
        <source>Add, change or remove color stops here</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GradientEditorBase</name>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="14"/>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="63"/>
        <source>Position:</source>
        <translation type="unfinished">位置:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="70"/>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="97"/>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="120"/>
        <source> %</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="80"/>
        <source>Color:</source>
        <translation type="unfinished">颜色:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="90"/>
        <source>Opacity:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradienteditor.ui" line="113"/>
        <source>Shade:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GradientPreview</name>
    <message>
        <location filename="../../../scribus/ui/gradientpreview.cpp" line="230"/>
        <source>Add Stop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/gradientpreview.cpp" line="232"/>
        <source>Remove Stop</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GradientVectorDialog</name>
    <message>
        <location filename="../../../scribus/ui/gradientvectordialog.cpp" line="111"/>
        <source>Gradient Vector</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManager</name>
    <message>
        <source>Manage Guides</source>
        <translation type="obsolete">管理参考线</translation>
    </message>
    <message>
        <source>Horizontal Guides</source>
        <translation type="obsolete">水平参考线</translation>
    </message>
    <message>
        <source>Vertical Guides</source>
        <translation type="obsolete">垂直参考线</translation>
    </message>
    <message>
        <source>&amp;Y-Pos:</source>
        <translation type="obsolete">&amp;Y-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="231"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="56"/>
        <source>&amp;Add</source>
        <translation type="unfinished">&amp;A 添加</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="232"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="66"/>
        <source>D&amp;elete</source>
        <translation type="unfinished">&amp;E 删除</translation>
    </message>
    <message>
        <source>&amp;X-Pos:</source>
        <translation type="obsolete">&amp;X-坐标:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="233"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="95"/>
        <source>A&amp;dd</source>
        <translation type="unfinished">&amp;D 添加</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="234"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="105"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">&amp;L 删除</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="235"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="120"/>
        <source>&amp;Lock Guides</source>
        <translation type="unfinished">&amp;L 锁定参考线</translation>
    </message>
    <message>
        <source>&amp;Rows:</source>
        <translation type="obsolete">&amp;R 行:</translation>
    </message>
    <message>
        <source>C&amp;olumns:</source>
        <translation type="obsolete">&amp;O 列:</translation>
    </message>
    <message>
        <source>Refer to:</source>
        <translation type="obsolete">参考:</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="245"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="248"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="195"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="282"/>
        <source>&amp;Page</source>
        <translation type="unfinished">&amp;P 页</translation>
    </message>
    <message>
        <source>&amp;Margins</source>
        <translation type="obsolete">&amp;M 页边距</translation>
    </message>
    <message>
        <source>&amp;Selection</source>
        <translation type="obsolete">&amp;S 选择</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;C 关闭</translation>
    </message>
    <message>
        <source>Rows and Columns - Automatic Guides</source>
        <translation type="obsolete">行和列-自动参考线</translation>
    </message>
    <message>
        <source>Row &amp;Gap</source>
        <translation type="obsolete">&amp;G 行距</translation>
    </message>
    <message>
        <source>Colum&amp;n Gap</source>
        <translation type="obsolete">&amp;N 列距</translation>
    </message>
    <message>
        <source>&amp;Update</source>
        <translation type="obsolete">&amp;U 更新</translation>
    </message>
    <message>
        <source>Set the guides in document. Guide manager is still opened but the changes are persistant</source>
        <comment>guide manager</comment>
        <translation type="obsolete">在文档设置参考线。参考线管理器还是打开状态,但是更改是延续的</translation>
    </message>
    <message>
        <source>&amp;Apply to All Pages</source>
        <translation type="obsolete">&amp;A 应用到所有页面</translation>
    </message>
    <message>
        <source>Guide</source>
        <translation type="obsolete">参考线</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation type="obsolete">预览</translation>
    </message>
    <message>
        <source>There is empty (0.0) guide already</source>
        <translation type="obsolete">已经有空白的(0.0)参考线</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="226"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="32"/>
        <source>&amp;Single</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="229"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="237"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="40"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="147"/>
        <source>Horizontals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="59"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="211"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="298"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="357"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="69"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="221"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="308"/>
        <source>Alt+E</source>
        <translation type="unfinished">Alt+E</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="230"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="238"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="79"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="234"/>
        <source>Verticals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="98"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="108"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="123"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="236"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="251"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="130"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="321"/>
        <source>Appl&amp;y to All Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="133"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="324"/>
        <source>Alt+Y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="227"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="141"/>
        <source>&amp;Column/Row</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="239"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="153"/>
        <source>&amp;Number:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="241"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="176"/>
        <source>U&amp;se Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="179"/>
        <source>Alt+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="198"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="285"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="344"/>
        <source>Alt+P</source>
        <translation type="unfinished">Alt+P</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="246"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="249"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="208"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="295"/>
        <source>M&amp;argins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="247"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="250"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="218"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="305"/>
        <source>S&amp;election</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="240"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="240"/>
        <source>Nu&amp;mber:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="242"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="263"/>
        <source>Use &amp;Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="266"/>
        <source>Alt+G</source>
        <translation type="unfinished">Alt+G</translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="228"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="332"/>
        <source>&amp;Misc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="338"/>
        <source>Delete all guides from the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="252"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="341"/>
        <source>Delete Guides from Current &amp;Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.ui" line="351"/>
        <source>Delete all guides from the current document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="253"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="354"/>
        <source>Delete Guides from &amp;All Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="225"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="16"/>
        <source>Guide Manager</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="255"/>
        <source>Add a new horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="256"/>
        <source>Delete the selected horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="257"/>
        <source>Add a new vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="258"/>
        <source>Delete the selected vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="259"/>
        <source>Lock the guides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="260"/>
        <source>Apply to all pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="261"/>
        <source>Number of horizontal guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="262"/>
        <source>Number of vertical guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="263"/>
        <source>Create rows with guides, with an additional gap between the rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="264"/>
        <source>Create columns with guides, with an additional gap between the columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="265"/>
        <source>Create the selected number of horizontal guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="266"/>
        <source>Create the selected number of horizontal guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="267"/>
        <source>Create the selected number of horizontal guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="268"/>
        <source>Create the selected number of vertical guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="269"/>
        <source>Create the selected number of vertical guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="270"/>
        <source>Create the selected number of vertical guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="271"/>
        <source>Apply the shown guides to all pages in the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="272"/>
        <source>Delete all guides shown on the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="273"/>
        <source>Delete all guides from all pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="243"/>
        <location filename="../../../scribus/ui/guidemanager.cpp" line="244"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="189"/>
        <location filename="../../../scribus/ui/guidemanager.ui" line="276"/>
        <source>Refer to</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManagerBase</name>
    <message>