Subversion Repositories Scribus

Rev

Rev 18785 | Rev 19382 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="de_DE">
<context>
    <name></name>
    <message>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="obsolete">getColorNames() -&gt; list

Gibt eine Liste zurück, die alle vorhandenen Farben des aktuellen Dokuments enthält. 
Wenn kein Dokument geöffnet ist, werden die Standardfarben zurückgegeben.</translation>
    </message>
    <message>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple

Gibt eine Liste mit den vier Farbkomponenten der Farbe &quot;name&quot; im aktuellen 
Dokument wieder. Wenn kein Dokument geöffnet ist, werden die Werte der 
angegebenen Standardfarbe zurückgegeben.

Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">changeColor(&quot;name&quot;, c, m, y, k)

Ändert die Farbe &quot;name&quot; auf die angegeben CMYK-Werte. Die Abkürzungen
stehen für die vier Farben c=Cyan, m=Magenta, y=Yellow, b=Black.
Die Werte müssen zwischen 0 und 255 liegen.

Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn ein ungültiger Farbname angegeben wird, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)

Löscht die Farbe &quot;name&quot;. An allen Stellen, wo &quot;name&quot; im Dokument auftritt,
wird sie durch &quot;replace&quot; ersetzt. Standardmässig ist &quot;replace&quot; gar keine Farbe -
Transparenz.

Sie können deleteColor auch verwenden, wenn kein Dokument geöffnet ist, dann
bleibt die Angabe von &quot;replace&quot; aber ohne Auswirkung.

Wenn die angegebene Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn der Farbname ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)

An allen Stellen, wo die Farbe &quot;name&quot; vorkommt, wird sie duch die Farbe
&quot;replace&quot; ersetzt.

Wenn eine der Farben nicht vorhanden ist, tritt der Fehler NotFoundError auf.
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="obsolete">newDocDialog() -&gt; bool

Zeigt den Dialog \&quot;Neues Dokument\&quot; an. Damit können Sie ein neues Dokument erstellen, wenn der Benutzer die standardmässigen Einstellung aktzeptiert. Erzeugt kein neues Dokument, wenn der Benutzer auf \&quot;Abbrechen\&quot; klickt. 
Gibt den Wert \&quot;true\&quot; zurück, wenn ein neues Dokument erstellt wurde.</translation>
    </message>
    <message>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filenameShows a File Open dialog box with the caption &quot;caption&quot;. Files are filteredwith the filter string &quot;filter&quot;. A default filename or file path can alsosupplied, leave this string empty when you don&apos;t want to use it.  A value ofTrue for haspreview enables a small preview widget in the FileSelect box.  Whenthe issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialogotherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is Truethe dialog shows and returns only directories. The default for all of theoptional parameters is False.The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.For example &apos;Images (*.png *.xpm *.jpg)&apos;.Refer to the Qt-Documentation for QFileDialog for details on filters.Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)</translation>
    </message>
    <message>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
Zeigt einen Dialog mit dem Titel &quot;caption&quot;, der Botschaft &quot;message&quot; und dem Symbol &quot;icon&quot; sowie
bis zu 3 Buttons an. Standard ist kein Symbol und ein OK-Button. Nur Titel und Botschaft sind
erforderliche Felder, aber Symbol und Buttons werden empfohlen.
Der Text der Botschaft kann auch einfachen HTML-Code enthalten.
Gibt die Nummer des Buttons wieder, der gedrückt wurde, beginnend mit 1.
Für Buttons und Symbole gibt es vordefinierte Konstanten, die gleichen wie in
der Qt-Dokumentation.
Die sind im Modul definiert und heissen BUTTON_* und ICON_* . Es gibt auch zwei
spezielle Konstanten, die auch den Wert 0 annehmen können: BUTTONOPT_DEFAULT aktiviert den 
jeweiligen Button per Druck auf Enter.
BUTTONOPT_ESCAPE drückt die Escape-Taste falls dieser Button gedrückt wird.
Beispiel
result = messageBox(&apos;Script failed&apos;,&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,ICON_WARNING,
BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
Konstanten für Buttons und Symbole:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.</translation>
    </message>
    <message>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string

Zeigt einen Dialog an, der einen String verlangt und zurückgibt.
Parameter: Fenstertitel, Text im Fenster und optionaler &apos;default&apos;-Text.

Beispiel: valueDialog(&apos;TItel&apos;, &apos;Text im Fenster&apos;, &apos;optional&apos;)</translation>
    </message>
    <message>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the(new line)
following meaning:(new line)
(new line)
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.</translation>
    </message>
    <message>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="obsolete">closeDoc()

Schliesst das aktuelle Dokument, ohne Änderungen zu sichern.

Wenn kein Dokument offen ist, tritt der Fehler NoDocOpenError auf</translation>
    </message>
    <message>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="obsolete">haveDoc() -&gt; bool

Gibt True zurück, wenn ein Dokument geöffnet ist.</translation>
    </message>
    <message>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="obsolete">openDoc(&quot;name&quot;)

Öffnet das Dokument &quot;name&quot;.

Schlägt das fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="obsolete">saveDoc()

Speichert das Dokument unter dem aktuellen Namen und gibt True zurück, wenn das
erfolgreich war. Wurde das Dokument noch nicht gesichert, öffnet sich der &quot;Speichern&quot;-
Dialog.

Wenn das Sichern fehlschlägt, erscheint derzeit keine Fehlermeldung.</translation>
    </message>
    <message>
        <source>getDocName() -&gt; string

Returns the name the document was saved under.
If the document was not saved before the name is empty.
</source>
        <translation type="obsolete">getDocName() -&gt; string

Returns the name the document was saved under.
If the document was not saved before the name is empty.
</translation>
    </message>
    <message>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="obsolete">saveDocAs(&quot;name&quot;)

Speichert das aktuelle Dokument unter dem neuen Namen &quot;name&quot;. Die Pfadangabe kann dabei
relativ oder absolut sein.

Schlägt das Sichern fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.</translation>
    </message>
    <message>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(lr, rr, tr, br)Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)margins are given in the measurement units of the document - see UNIT_&lt;type&gt;constants.</translation>
    </message>
    <message>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="obsolete">setUnit(type)

Ändert die Masseinheit des Dokuments auf &quot;type&quot;. Mögliche Einheiten geben Sie durch die 
Konstanten UNIT_&lt;type&gt; an.

Ist die Einheit ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)

Gibt die Masseinheit des Dokuments zurück. Der Rückgabewert ist eine
der möglichen UNIT_*-Konstanten:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
    </message>
    <message>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)

Lädt die Absatzstile aus der Datei &quot;filename&quot; in das aktuelle Dokument.</translation>
    </message>
    <message>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="obsolete">setDocType(facingPages, firstPageLeft)

Setzt den Dokumenttyp. Gegenüberliegende Seiten erreichen Sie mit FACINGPAGES, normale
Seiten mit NOFACINGPAGES. Wenn die erste Seite links sein soll, schreiben Sie FIRSTPAGELEFT, 
ansonsten FIRSTPAGERIGHT.</translation>
    </message>
    <message>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="obsolete">closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().</translation>
    </message>
    <message>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="obsolete">masterPageNames()(new line)
(new line)
Returns a list of the names of all master pages in the document.</translation>
    </message>
    <message>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="obsolete">editMasterPage(pageName)(new line)
(new line)
Enables master page editing and opens the named master page(new line)
for editing. Finish editing with closeMasterPage().</translation>
    </message>
    <message>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="obsolete">createMasterPage(pageName)(new line)
(new line)
Creates a new master page named pageName and opens it for(new line)
editing.</translation>
    </message>
    <message>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="obsolete">deleteMasterPage(pageName)(new line)
(new line)
Delete the named master page.</translation>
    </message>
    <message>
        <source>getObjectType([&quot;name&quot;]) -&gt; string

Get type of object &quot;name&quot; as a string.
</source>
        <translation type="obsolete">getObjectType([&quot;name&quot;]) -&gt; string

Get type of object &quot;name&quot; as a string.</translation>
    </message>
    <message>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string

Gibt den Wert der Füllfarbe des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuell ausgewählt Objekt verwendet.</translation>
    </message>
    <message>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string

Gibt den Namen der Linienfarbe des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer

Gibt die Linienbreite des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer

Gibt den Tonwert des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not giventhe currently selected item is used.  The join types are:JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
    </message>
    <message>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (siehe Konstanten)

Gibt den Stil der Linienrundungen des Objekts &quot;name&quot; an. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.
Die unterstützten Stile sind CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
    </message>
    <message>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (siehe Konstanten)

Gibt den Linienstil des Objekts &quot;name&quot; wieder. Ist &quot;name&quot; nicht angegeben,
wird das aktuelle Objekt benutzt. Linienstile sind LINE_DASH, LINE_DASHDOT,
LINE_DASHDOTDOT, LINE_SOLID</translation>
    </message>
    <message>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer

Gibt den Tonwert der Füllfarbe von &quot;name&quot; zurück. Ist &quot;name&quot; nicht angegeben, wird
das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.</translation>
    </message>
    <message>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)(

Gibt ein Zahlenpaar (x,y) zurück mit den Skalierungswerten des Bildes im Rahmen
&quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Rahmen verwendet.</translation>
    </message>
    <message>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string

Gibt den Dateinamen des Bildes im Rahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.</translation>
    </message>
    <message>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (Breite,Höhe)

Gibt das Zahlenpaar (Breite,Höhe) des Objekts &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet. Die Grösse wird in der Masseinheit
des Dokuments angegeben - siehe die UNIT_*-Konstanten.</translation>
    </message>
    <message>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer

Gibt die Drehung des Objekts &quot;name&quot; in Grad zurück und im Uhrzeigersinn zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="obsolete">getAllObjects() -&gt; list

Gibt eine Liste zurück mit allen auf der aktuellen Seite verwendeten Objekte.</translation>
    </message>
    <message>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="obsolete">getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.</translation>
    </message>
    <message>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="obsolete">getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.</translation>
    </message>
    <message>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="obsolete">getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.</translation>
    </message>
    <message>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="obsolete">setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.</translation>
    </message>
    <message>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])

Verschiebt das Objekt &quot;name&quot; um dx und dy relativ zur Position. Die 
Entfernungsangaben werden in der Masseinheit des Dokuments 
angegeben (siehe Konstanten UNIT*). Wenn &quot;name&quot; nicht vorhanden ist, 
wird das ausgewählte Objekt verschoben und wenn &quot;name&quot; zu einer Gruppe
gehört, wird die gesamte Gruppe verschoben.</translation>
    </message>
    <message>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])

Bewegt das Objekt &quot;name&quot; an die neue Stelle. Die Koordinaten werden in der Masseinheit
des Dokuments angegeben (siehe UNIT_*-Konstanten). Ist &quot;name&quot; nicht angegeben, wird das
aktuelle Objekt benutzt. Gehört &quot;name&quot; zu einer Gruppe, wird die Gruppe verschoben.</translation>
    </message>
    <message>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object isrotated by the vertex that is currently selected as the rotation point - bydefault, the top left vertex at zero rotation. Positive values mean counterclockwise rotation when the default rotation point is used. If &quot;name&quot; is notgiven the currently selected item is used.</translation>
    </message>
    <message>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.</translation>
    </message>
    <message>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])

Ändert die Grösse von &quot;name&quot; auf die Breite width und die Höhe height.
ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="obsolete">getSelectedObject([nr]) -&gt; string

Gibt den Namen des ausgewählten Objekts zurück. &quot;nr&quot; gibt die Zahl des gewählten
Objekts an. 0 bedeutet das erste ausgewählte Objekt, 1 das zweite usw.</translation>
    </message>
    <message>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="obsolete">selectionCount() -&gt; integer

Gibt die Anzahl der ausgewählten Objekte zurück.</translation>
    </message>
    <message>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="obsolete">selectObject(&quot;name&quot;)

Wählt das Objekt &quot;name&quot; aus.</translation>
    </message>
    <message>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="obsolete">deselectAll()

Setzt alle Objekte im Dokument auf nicht ausgewählt.</translation>
    </message>
    <message>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="obsolete">groupObjects(list)

Gruppiert die Elemente in &quot;list&quot;. &quot;list&quot; muss die Namen der zu gruppierenden 
Objekte enthalten. Ist &quot;list&quot; nicht angegeben, werden die aktuell gewählten 
Objekte verwendet.</translation>
    </message>
    <message>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="obsolete">unGroupObjects(&quot;name&quot;)

Zerstört die Gruppe &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird die aktuelle Gruppe verwendet.</translation>
    </message>
    <message>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])

Skaliert die Gruppe, zu dem das Objekt &quot;name&quot; gehört. Werte grösser als 1 vergrössern das Objekt, 
Werte kleiner als 1 verkleinert das Objekt. Zum Beispiel bedeutet 0.5 = 50 % oder 1.5=150% der 
Originalgrösse. &quot;factor&quot; muss grösser als 0 sein. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
benutzt.</translation>
    </message>
    <message>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])

Lädt das Bild &quot;picture&quot; in den Bildrahmen &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, 
wird der aktuelle Rahmen benutzt.

Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf</translation>
    </message>
    <message>
        <source>setImageOffset(x, y [, &quot;name&quot;])

Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on 
properties palette when point unit is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">setImageOffset(x, y [, &quot;name&quot;])

Sets the position of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The specified offset values are equal to the values shown on 
properties palette when point unit is used.

May raise WrongFrameTypeError if the target frame is not an image frame</translation>
    </message>
    <message>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])

Skaliert das Bild &quot;name&quot; auf die angegeben Werte. 1 bedeutet 100 %. Ist &quot;name&quot;
nicht angegeben, wird der aktuelle Bildrahmen verwendet.

Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf,</translation>
    </message>
    <message>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool

Sperrt das Objekt &quot;name&quot;, wenn es freigegeben ist und entsperrt es, wenn es
gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
Gibt True zurück, wenn das Objekt gesperrt ist.</translation>
    </message>
    <message>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool

Gibt True zurück, wenn &quot;name&quot; gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Setzt die Eigenschaft An Rahmen anpassen für den gewählten Bildrahmen oder angegebenen
Bildrahmen.
&apos;proportional&apos; verkleinert das Bild proportional zur ursprünglichen Grösse.
Sowohl &apos;scaletoframe&apos; als auch &apos;proportional&apos; sind boolsche Werte.

Kann den Fehler WrongFrameTypeError verursachen.</translation>
    </message>
    <message>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="obsolete">setRedraw(bool)

Wenn bool=False, dann wird die Seite nicht neu neu aufgebaut (redraw ist deaktiviert).
Standard ist bool=True. Diese Einstellung bleibt bestehen, auch wenn das Script beendet ist.
Stellen Sie also sicher, dass setRedraw(True) aufgerufen wird, bevor das Script beendet wird.</translation>
    </message>
    <message>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="obsolete">getFontNames() -&gt; list

Gibt eine Liste mit allen verfügbaren Schriften zurück.</translation>
    </message>
    <message>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="obsolete">getXFontNames() -&gt; list

Gibt genaue Informationen zu einer Schrift zurück mit den Werten:
[ (Name in Scribus, Familie, wirklicher Name, Subset (1|0), embed PS (1|0), Fontdatei), (...), ... ]</translation>
    </message>
    <message>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Erzeugt ein Bild mit dem Text &quot;sample&quot; in der Schrift &quot;font&quot; und der Grösse &quot;size&quot;.
Ist &quot;filename&quot; angegeben, wird das Bild unter &quot;filename&quot; abgespeichert. Ansonsten
werden die Bilddaten als String zurückgegeben. Das optionale Argument &quot;format&quot; gibt 
an, welches Bildformat generiert werden soll. Unterstützt werden die Formate, die auch 
QPixmap.save() kennt, zum Beispiel PPM, JPEG, PNG und XPM.

Der Fehler NotFoundError tritt auf, wenn die Schrift nicht gefunden wird.
Der Fehler ValueError tritt auf, wenn &quot;sample&quot; leer ist oder der Dateiname ungültig ist.</translation>
    </message>
    <message>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="obsolete">getLayers() -&gt; list

Gibt eine Liste mit allen Ebenen zurück.</translation>
    </message>
    <message>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setActiveLayer(&quot;name&quot;)

Macht die Ebene &quot;name&quot; zur aktiven Ebene.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="obsolete">getActiveLayer() -&gt; string

Gibt die aktive Ebene zurück.</translation>
    </message>
    <message>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Verschiebt das Objekt &quot;name&quot; auf die Ebene &quot;layer&quot;. Die Ebene muss
vorhanden sein. Ist &quot;name&quot; nicht angegeben, wird das aktive Objekt benutzt.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)

Zeigt die Ebene &quot;layer&quot; an oder versteckt sie. Ist &quot;visible&quot; auf False gesetzt,
ist die Ebene unsichtbar.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
Sets the layers &quot;layer&quot;(sp)(sp)flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
Sets the layers &quot;layer&quot;(sp)(sp)blendmode to blend.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
Sets the layers &quot;layer&quot;(sp)(sp)transparency to trans.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Gibt zurück, ob die Ebene gedruckt wird oder nicht. True bedeutet, dass die Ebene
gedruckt wird, False bedeutet, dass das Drucken deaktiviert ist.

Der Fehler NotFoundError tritt auf, wenn die Ebene nicht existiert.
Der Fehler ValueError tritt auf, wenn der Ebenenname ungültig ist.</translation>
    </message>
    <message>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">deleteLayer(&quot;layer&quot;)

Löscht die Ebene &quot;layer&quot;. Ist die Ebene nicht vorhanden oder ist nur eine
Ebene vorhanden, passiert gar nichts.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf,
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">createLayer(layer)

Erzeugt einen Ebene mit dem Namen &quot;layer&quot;.

Ist der Name ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>fileQuit()

Quit Scribus.
</source>
        <translation type="obsolete">fileQuit()

Quit Scribus.</translation>
    </message>
    <message>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="obsolete">getGuiLanguage() -&gt; string

Gibt den Wert der Variable -lang zurück.</translation>
    </message>
    <message>
        <source>moveSelectionToFront()

Moves current selection to front.
</source>
        <translation type="obsolete">moveSelectionToFront()
Moves current selection to front.</translation>
    </message>
    <message>
        <source>moveSelectionToFront()

Moves current selection to back.
</source>
        <translation type="obsolete">moveSelectionToFront()
Moves current selection to back.</translation>
    </message>
    <message>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt ein neues Rechteck auf der aktuellen Seite und gibt seinen Namen zurück. Die
Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe UNIT-Konstanten).
&quot;name&quot; sollte eine eindeutige Identifikation des Rechtecks ermöglichen, weil Sie den Objekt-
namen immer wieder benötigen. Ist &quot;name&quot; nicht vorhanden, wählt Scribus einen Namen für Sie.

Wenn Sie einen schon verwendeten Namen benutzen, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt eine Ellipse auf der aktuellen Seite und gibt ihren Namen zurück. Die Koordinaten
werden in der Masseinheit des Dokuments angegeben (siehe UNIT-Konstanten). &quot;name&quot; sollte
das Objekt eindeutig identifizieren, weil Sie den Namen für spätere Zwecke brauchen. Ist &quot;name&quot;
nicht angegeben, erzeugt Scribus einen Namen für das Objekt.

Ist der Name schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt einen Bildrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt einen neuen Textrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Erzeugt eine Linie von P(x1,y1) zu P(x2,y2) und gibt ihren Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string

Erzeugt eine Mehrfachlinie und und gibt ihren Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn].
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht genügend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string

Erzeugt ein Vieleck und gibt seinen Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn]. Sie müssen
mindestens 3 Punkte angeben, aber Sie müssen den ersten Punkt nicht zum
Schliessen des Polygons erneut angeben - das geschieht automatisch.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string

Erzeugt eine Bézierkurve und gibt ihren Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: 
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]. 
x und y steht dabei für die X- und Y-Koordinaten und kx und ky steht für den
Kontrollpunkt der Kurve. 
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Erzeugt Text auf einem Pfad, indem die Objekte &quot;textbox&quot; und &quot;beziercurve&quot;
zusammengefügt werden.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Sind ein oder beide Objekte nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
    </message>
    <message>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="obsolete">deleteObject([&quot;name&quot;])

Löscht das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt gelöscht.</translation>
    </message>
    <message>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="obsolete">textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).(new line)
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.</translation>
    </message>
    <message>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool

Gibt an, ob das Objekt mit dem Name &quot;name&quot; auch wirklich im aktuellen Dokument
existiert. &quot;name&quot; ist optional, ist &quot;name&quot; nicht angegeben, wird True ausgegeben, wenn
gerade ein Objekt selektiert ist.</translation>
    </message>
    <message>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])

Setzt den Absatzstil &quot;style&quot; für das Objekt &quot;name&quot;. Ist kein Objekt angegeben,
wird der Stil auf das aktuelle Objekt angewendet.</translation>
    </message>
    <message>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="obsolete">getAllStyles() -&gt; list

Gibt eine Listen mit allen Absatzstilen im aktuellen Dokument zurück.</translation>
    </message>
    <message>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).</translation>
    </message>
    <message>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">newPage(where [,&quot;masterpage&quot;])

Erzeugt eine neue Seite. Falls &quot;where&quot; -1 ist, wird die neue Seite an das Dokument angefügt,
ansonsten wird die neue Seite vor &quot;where&quot; eingefügt. Seitennummern werden von 1 ab hoch-
gezählt, egal welches die angezeigte erste Seitennummer Ihres Dokumentes ist. Der optionale
Parameter &quot;masterpage&quot; legt den Namen der Musterseite für die neue Seite fest</translation>
    </message>
    <message>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="obsolete">currentPage() -&gt; integer

Gibt die Nummer der aktuellen Seite zurück. Seitenzahlen werden ab 1 gezählt, egal welche
Seitenzahl auf der aktuellen Seite angezeigt wird.</translation>
    </message>
    <message>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="obsolete">redrawAll()

Baut alle Seiten neu auf.</translation>
    </message>
    <message>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="obsolete">getPageType() -&gt; integerReturns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page</translation>
    </message>
    <message>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="obsolete">savePageAsEPS(&quot;name&quot;)

Speichert die aktuelle Seite als EPS-Datei mit dem Namen &quot;name&quot;.

Schlägt das Speichern fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">deletePage(nr)

Löscht die Seite mit der Nummer &quot;nr&quot;. Besteht das Dokument nur aus einer Seite, passiert nichts.
Seitenzahlen werden von 1 aufwärts gezählt, egal, welche Seitenzahl Sie auf der aktuellen Seite
im Dokument sehen.

Ist die Seitenzahl ungültig, tritt der Fehler IndexError auf</translation>
    </message>
    <message>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="obsolete">gotoPage(nr)Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note thatgotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, itjust sets the page that script commands will operates on.May raise IndexError if the page number is out of range.</translation>
    </message>
    <message>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="obsolete">pageCount() -&gt; integer

Gibt die Anzahl der Seiten im Dokument zurück.</translation>
    </message>
    <message>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="obsolete">getHGuides() -&gt; list

Gibt eine Liste zurück, die die Position der horizontalen Hilfslinien enthält. Die Werte
werden in der Masseinheit des Dokuments angegeben, siehe UNIT-Konstanten.</translation>
    </message>
    <message>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="obsolete">setHGuides(list)

Legt horizontale Hilfslinien fest, list muss eine Liste der Linien sein, angegeben in der Masseinheit
des Dokuments, siehe UNIT-Konstanten.

Beispiel:
setHGuides(getHGuides() + [200.0, 210.0] # fügt eine neue Hilfslinie hinzu
</translation>
    </message>
    <message>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="obsolete">getVGuides()

Siehe getHGuides.</translation>
    </message>
    <message>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="obsolete">setVGuides()

Siehe setHGuides.</translation>
    </message>
    <message>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="obsolete">getPageSize() -&gt; tuple

Gibt eine Liste mit der Seitengrösse in der aktuellen Masseinheit zurück, siehe
UNIT-Konstanten und getPageMargins()</translation>
    </message>
    <message>
        <source>getPageNSize() -&gt; tuple

Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="obsolete">getPageNSize() -&gt; tuple

Returns a tuple with a particular page&apos;s size measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()</translation>
    </message>
    <message>
        <source>getPageNMargins() -&gt; tuple

Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="obsolete">getPageNMargins() -&gt; tuple

Returns a tuple with a particular page&apos;s margins measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()</translation>
    </message>
    <message>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="obsolete">getPageItems() -&gt; list

Gibt eine Liste zurück mit den Objekten auf der aktuelle Seite. Die Reihenfolge
der Werte ist: (Name, Typ des Objekts, Anordnung).

Beispiel: [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)] bedeutet, dass das Objekt Text1 heisst, 
ein Textrahmen ist  (type 4) und sich auf der ersten Seite befindet...</translation>
    </message>
    <message>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="obsolete">getPageMargins()

Gibt die Seitenränder als ein Tupel in der gerade aktiven Einheit zurück (oben, unten, links, rechts).
Mögliche Einheiten finden Sie bei UNIT_&lt;tye&gt; und getPageSize().
</translation>
    </message>
    <message>
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
        <translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
    </message>
    <message>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="obsolete">setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Füllt das Objekt &quot;name&quot; mit einem Farbverlauf. Farbbezeichnungen sind die
gleichen wie für setFillColor() und setFillShade(). Siehe Konstanten
für mögliche Typen (FILL_&lt;type&gt;).</translation>
    </message>
    <message>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])

Setzt die Füllfarbe &quot;color&quot; für das Objekt &quot;name&quot;. &quot;color&quot; ist der Name einer
vorhandenen Farbe. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
verwendet.</translation>
    </message>
    <message>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])

Setzt die Linienfarbe &quot;color&quot; für das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, 
wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="obsolete">setLineWidth(width, [&quot;name&quot;])

Setzt die Linienbreite für das Objekt &quot;name&quot; auf &quot;width&quot;. &quot;width&quot; muss zwischen 
0.0 und 12.0 gross sein und wird in Punkt angegeben. Ist &quot;name&quot; nicht angegeben,
wird das aktuelle Objekt verwendet.

Ist die Linienbreite ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="obsolete">setLineShade(shade, [&quot;name&quot;])

Setzt den Tonwert der Linie des Objekts &quot;name&quot; auf &quot;shade&quot;. &quot;shade&quot; ist eine
ganze Zahl zwischen 0 und 100. Ist &quot;name&quot; nicht angegeben, wird das aktuelle 
Objekt verwendet.

Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="obsolete">setLineJoin(join, [&quot;name&quot;])

Setzt die Ecken der Linien des Objekts &quot;name&quot; auf den Stil join.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Obekt verwendet.
Benutzen Sie die vorgegeben Konstaten des Typs JOIN_*.</translation>
    </message>
    <message>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="obsolete">SetLineEnd(endtype, [&quot;name&quot;])

Setzt die Linienenden des Objekts &quot;name&quot; auf den Stil &quot;endtype&quot;.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
Benutzen Sie die vorgegebenen Konstanten des Typs CAP_*.</translation>
    </message>
    <message>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="obsolete">setLineStyle(style, [&quot;name&quot;])

Setzt den Linienstil des Objekts &quot;name&quot; auf den Stil &quot;style&quot;. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet. Benutzen Sie die
vorgegebenen Konstanten des Typs LINE_*.</translation>
    </message>
    <message>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="obsolete">setFillShade(shade, [&quot;name&quot;])

Setzt den Tonwert der Füllfarbe für das Objekt &quot;name&quot; auf &quot;shade&quot;.
&quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein. Ist &quot;name&quot;
nicht angegeben, wird das aktuelle Objekt benutzt.

Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])

Setzt den Eckradius für das Objekt &quot;name&quot; auf radius. Der Radius wird
in Punkt angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.

Ist der Eckradius negativ, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Setzt den Linienstil für das Objekt &quot;name&quot; auf den angegebenen Stil.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Stil benutzt.

Ist der Stil nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
    </message>
    <message>
        <source>createParagraphStyle(...)

Creates a paragraph style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create

linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:

fixed linespacing:          0

automatic linespacing:      1

baseline grid linespacing:  2

linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing

alignment [optional] -&gt; specifies the alignment of the paragraph

-&gt; left:     0

-&gt; center:   1

-&gt; right:    2

-&gt; justify:  3

-&gt; extend:   4

leftmargin [optional], rightmargin [optional] -&gt; specify the margin

gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs

firstindent [optional] -&gt; the indent of the first line

hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)

dropcaplines [optional] -&gt; height (in lines) of the caps if used

dropcapoffset [optional] -&gt; offset of the caps if used

&quot;charstyle&quot; [optional] -&gt; char style to use

</source>
        <translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing:          0automatic linespacing:      1baseline grid linespacing:  2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left:     0-&gt; center:   1-&gt; right:    2-&gt; justify:  3-&gt; extend:   4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
    </message>
    <message>
        <source>createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline

-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code

</source>
        <translation type="obsolete">createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline


-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code</translation>
    </message>
    <message>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float

Gibt die Schriftgrösse in Punkten für den Textrahmen &quot;name&quot; zurück. Wenn innerhalb
des Rahmens Text markiert ist, wird die Schriftgrösse des ersten Zeichens verwendet.
Wenn &quot;name&quot; nicht vergeben ist, wird der selektierte Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string

Gibt den Namen der Schrift für den Textrahmen &quot;name&quot; zurück. Ist in
dem Textfeld Text ausgewählt, wird die Schrift des ersten gewählten
Zeichens angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
verwendet.</translation>
    </message>
    <message>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer

Gibt die Länge des Textes im Textrahmen &quot;name&quot; zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getText([&quot;name&quot;]) -&gt; string

Gibt den Text aus dem Textrahmen &quot;name&quot; zurück. Ist in dem Textfeld Text markiert,
wird der selektierte Text zurückgegeben. Der gesamte Text wird zurückgegeben, nicht
nur der sichtbare Teil des Textes, Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string

Gibt den Text aus dem Textrahmen &quot;name&quot; zurück und aus allen Rahmen, die mit
dem Rahmen &quot;name&quot; verbunden sind. Ist in dem Textfeld Text markiert,
wird der selektierte Text zurückgegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float

Gibt den Zeilenabstand für den Textrahmen &quot;name&quot; in Punkten zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple

Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float

Gibt den Zeilenabstand für den Text im Rahmen &quot;name&quot; in Punkten zurück. Ist
&quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer

Gibt die Anzahl der Spalten im Textrahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])

Ändert den Text im Rahmen &quot;name&quot; auf den String &quot;text&quot;.
Der Text muss URF8-kodiert sein - verwenden Sie z.B. unicode(text, &apos;iso-8859-2&apos;).
Lesen Sie in der FAQ nach für weitere Informationen. Ist &quot;name&quot; nicht angegeben, 
wird der aktuelle Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="obsolete">nsertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.</translation>
    </message>
    <message>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])

Setzt die Schrift für den Rahmen &quot;name&quot; auf &quot;font&quot;. Ist Text ausgewählt,
wird nur die Markierung verändert. Ist &quot;name&quot; nicht angegeben, wird der
aktuelle Textrahmen verwendet.

Ist die Schrift ungültig, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="obsolete">setFontSize(size, [&quot;name&quot;])

Setzt die Schriftgrösse im Textrahmen &quot;name&quot; auf den Wert &quot;size&quot;. &quot;size&quot; ist
ein Wert in Punkten zwischen 1 und 512. Ist eine Markierung vorhanden, wird
nur die die Markiertung verändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
Textrahmen verwendet.

Ist die Schriftgrösse ungültig, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])

Setzt den Zeilenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
&quot;size&quot; ist ein Wert in Punkten. Ist &quot;name&quot; nicht angegeben, wird der
aktuelle Textrahmen verwendet.

Ist der Wert für Zeilenabstand ungültig, wird der Fehler ValueError
ausgegeben.</translation>
    </message>
    <message>
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])

Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.

May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
        <translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
    </message>
    <message>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="obsolete">setColumnGap(size, [&quot;name&quot;])

Setzt den Spaltenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.

Ist der Abstand nicht positiv, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="obsolete">setColumns(nr, [&quot;name&quot;])

Legt die Anzahl der Spalten im Textrahmen &quot;name&quot; fest auf &quot;nr&quot; fest.
Wenn &quot;name&quot; nicht angegeben ist, wird der aktuelle Textrahmen verwendet.

Ist die Anzahl der Spalten kleiner als 1, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])

Richtet den Text in dem Objekt &quot;name&quot; nach der Art &quot;align&quot; aus. Ist &quot;name&quot;
nicht angegeben, wird der aktuelle Textrahmen verwendet. &quot;align&quot; ist eine der
ALIGN_*-Konstanten. Siehe dir(scribus).

Bei einem falschen Argument wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="obsolete">selectText(start, count, [&quot;name&quot;])

Markiert &quot;count&quot; Zeichen des Textrahmens &quot;name&quot; beginnend mit dem Zeichen &quot;start&quot;. 
Die Zählung beginnt bei 0. Wenn &quot;count&quot;=0 ist, wird die Markierung gelöscht. Wenn &quot;name&quot;
nicht angegeben ist, wird der aktuelle Textrahmen verwendet.

Wenn die Werte ungültig sind, wird der Fehler IndexError ausgegeben.</translation>
    </message>
    <message>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">deleteText([&quot;name&quot;])

Löscht den Textrahmen &quot;name&quot;. Wenn Text ausgewählt ist, wird nur die Markierung
gelöscht. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen gelöscht.</translation>
    </message>
    <message>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])

Ändert die Farbe des Textes auf &quot;color&quot;. Wenn Text ausgewählt ist, wird die
Markierung auf &quot;color&quot; geändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Setzt die Farbe &quot;color&quot; für die Umrandung des Textes. Ist &quot;name&quot; nicht angegeben, wird der aktuelle 
Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setTextShade(shade, [&quot;name&quot;])

Setzt den Tonwert für den Textrahmen &quot;name&quot; auf &quot;shade&quot;.
Ist Text in dem Rahmen ausgewählt, wird nur der ausgewählt Text
verändert. &quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein.
Ist &quot;name&quot; nicht vorhanden oder angegeben, wird der aktuelle Rahmen verwendet.</translation>
    </message>
    <message>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Zwei Textrahmen verketten. &quot;Fromname&quot; wird mit &quot;Toname&quot; verkettet. Der Zielrahmen
muss leer sein und darf nicht mit anderen Rahmen verkettet sein.

Werden die Regeln verletzt, erscheint der Fehler ScribusException.</translation>
    </message>
    <message>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">unlinkTextFrames(&quot;name&quot;)

Entfernt den Textrahmen &quot;name&quot; aus der Reihe der verketteten Rahmen. Ist der
zu entfernende Rahmen einer aus der Mitte der Reihe, wird der vorherige und nächste
Rahmen miteinander verkettet, z.B. wird aus a-&gt;b-&gt;c dann a-&gt;c, wenn Sie Rahmen b
entfernen.

Wenn die Verkettungsregeln gebrochen werden, erscheint der Fehler ScribusException.</translation>
    </message>
    <message>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="obsolete">traceText([&quot;name&quot;])

Konvertiert den Textrahmen &quot;name&quot; in Umrisse. Ist &quot;name&quot; nicht vorhanden oder 
vorgegeben, wird der aktuelle Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable</translation>
    </message>
    <message>
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool

Gibt zurück, ob der Textrahmen &quot;name&quot; ein PDF-Lesezeichen ist.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.

Der Fehler WrongFrameTypeError tritt auf, wenn der Zielrahmen kein Textrahmen ist</translation>
    </message>
    <message>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="obsolete">messagebarText(&quot;string&quot;)

Schreibt &quot;string&quot; in die Statuszeile von Scribus. Der Text muss
UTF8-kodiert oder ein &apos;unicode&apos;-String sein (empfohlen).</translation>
    </message>
    <message>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="obsolete">progressReset()

Löscht die Fortschrittsanzeige. Wird aufgerufen, bevor eine neue Verlaufsanzeige benutzt wird.
Siehe progressSet.</translation>
    </message>
    <message>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="obsolete">progressTotal(max)

Setzt die Gesamtzahl der Schritte für die Fortschrittsanzeige. Siehe progressSet.</translation>
    </message>
    <message>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="obsolete">progressSet(nr)

Die Fortschrittsanzeigen auf &quot;nr&quot; setzen, ein Wert relativ zum vorher festgelegten Wert
für progressTotal. Die Fortschrittsanzeige verwendet Schritte zum Anzeigen des Verlaufs:
Sie geben die Gesamtzahl der Schritte an und dann immer die fertigen Schritte - die Verlaufs-
anzeige zeigt immer den Prozentsatz der fertigen Schritte an. Die Gesamtzahl der Schritte können
Sie mit progressTotal() festlegen, die aktuelle Zahl der Schritte mit progressSet().
Die Fortschrittsanzeige kann mit progressReset() zurückgesetzt werden. [Infos sind aus den 
Dokumenten von Trolltech Qt]</translation>
    </message>
    <message>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="obsolete">setCursor()

[nicht unterstützt!] Bitte verwenden Sie diese Funktion zur Zeit noch nicht.</translation>
    </message>
    <message>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="obsolete">docChanged(bool)

Aktiviert/Deaktivert das Icon zum Speichern und den entsprechenden Eintrag im Datei-Menü.
Wenn Sie ein Dokument verändert ist es hilfreich, diese Funktion aufzurufen, weil Scribus im Script-
Modus nicht automatisch erkennt, wann ein Dokument verändert wurde.</translation>
    </message>
    <message>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="obsolete">zoomDocument(double)(new line)
(new line)
Zoom the document in main GUI window. Actions have whole number(new line)
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.</translation>
    </message>
    <message>
        <source>scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</source>
        <translation type="obsolete">scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</translation>
    </message>
    <message>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
If loading was successful, the selection contains the imported SVG</translation>
    </message>
    <message>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
If loading was successful, the selection contains the imported EPS</translation>
    </message>
    <message>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
If loading was successful, the selection contains the imported SXD</translation>
    </message>
    <message>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
If loading was successful, the selection contains the imported ODG</translation>
    </message>
    <message>
        <source>isSpotColor(&quot;name&quot;) -&gt; bool

Returns True if the color &quot;name&quot; is a spot color.
See also setSpotColor()

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">isSpotColor(&quot;name&quot;) -&gt; boolReturns True if the color &quot;name&quot; is a spot color.See also setSpotColor()May raise NotFoundError if a named color wasn&apos;t found.May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>setSpotColor(&quot;name&quot;, spot)

Set the color &quot;name&quot; as a spot color if spot parameter is True.
See also isSpotColor()

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">setSpotColor(&quot;name&quot;, spot)Set the color &quot;name&quot; as a spot color if spot parameter is True.See also isSpotColor()May raise NotFoundError if a named color wasn&apos;t found.May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Internal scaling factors are different from the values shown on 
properties palette. Note : deprecated, use setImageScale() instead.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])Sets the internal scaling factors of the picture in the image frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used. A number of 1means 100 %. Internal scaling factors are different from the values shown on properties palette. Note : deprecated, use setImageScale() instead.May raise WrongFrameTypeError if the target frame is not an image frame</translation>
    </message>
    <message>
        <source>setImageScale(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %. Scaling factors are equal to the values shown on properties palette.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">setImageScale(x, y [, &quot;name&quot;])Sets the scaling factors of the picture in the image frame &quot;name&quot;.If &quot;name&quot; is not given the currently selected item is used. A number of 1means 100 %. Scaling factors are equal to the values shown on properties palette.May raise WrongFrameTypeError if the target frame is not an image frame</translation>
    </message>
    <message>
        <source>setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])

Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.
Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()
must have been called previously for the gradient fill to be visible.
</source>
        <translation type="obsolete">setGradientStop(&quot;color&quot;, shade, opacity, ramppoint, [&quot;name&quot;])Set or add a gradient stop to the gradient fill of the object &quot;name&quot; at position ramppoint.Color descriptions are the same as for setFillColor() and setFillShade(). setGradientFill()must have been called previously for the gradient fill to be visible.</translation>
    </message>
    <message>
        <source>setTextScalingV(scale, [&quot;name&quot;])

Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setTextScalingV(scale, [&quot;name&quot;])Sets the vertical character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setTextScalingH(scale, [&quot;name&quot;])

Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setTextScalingH(scale, [&quot;name&quot;])Sets the horizontal character scaling of the object &quot;name&quot; to &quot;scale&quot; in percent.If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
</context>
<context>
    <name>@default</name>
    <message>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="obsolete">getColorNames() -&gt; list

Gibt eine Liste zurück, die alle vorhandenen Farben des aktuellen Dokuments enthält. 
Wenn kein Dokument geöffnet ist, werden die Standardfarben zurückgegeben.</translation>
    </message>
    <message>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColor(&quot;name&quot;) -&gt; tuple

Gibt eine Liste mit den vier Farbkomponenten der Farbe &quot;name&quot; im aktuellen 
Dokument wieder. Wenn kein Dokument geöffnet ist, werden die Werte der 
angegebenen Standardfarbe zurückgegeben.

Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">changeColor(&quot;name&quot;, c, m, y, k)

Ändert die Farbe &quot;name&quot; auf die angegeben CMYK-Werte. Die Abkürzungen
stehen für die vier Farben c=Cyan, m=Magenta, y=Yellow, b=Black.
Die Werte müssen zwischen 0 und 255 liegen.

Wenn die Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn ein ungültiger Farbname angegeben wird, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.</translation>
    </message>
    <message>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">deleteColor(&quot;name&quot;, &quot;replace&quot;)

Löscht die Farbe &quot;name&quot;. An allen Stellen, wo &quot;name&quot; im Dokument auftritt,
wird sie durch &quot;replace&quot; ersetzt. Standardmässig ist &quot;replace&quot; gar keine Farbe -
Transparenz.

Sie können deleteColor auch verwenden, wenn kein Dokument geöffnet ist, dann
bleibt die Angabe von &quot;replace&quot; aber ohne Auswirkung.

Wenn die angegebene Farbe nicht gefunden wird, tritt der Fehler NotFoundError auf.
Wenn der Farbname ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">replaceColor(&quot;name&quot;, &quot;replace&quot;)

An allen Stellen, wo die Farbe &quot;name&quot; vorkommt, wird sie duch die Farbe
&quot;replace&quot; ersetzt.

Wenn eine der Farben nicht vorhanden ist, tritt der Fehler NotFoundError auf.
Wenn der Name der Farbe ungültig ist, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="obsolete">newDocDialog() -&gt; bool

Zeigt den Dialog \&quot;Neues Dokument\&quot; an. Damit können Sie ein neues Dokument erstellen, wenn der Benutzer die standardmässigen Einstellung aktzeptiert. Erzeugt kein neues Dokument, wenn der Benutzer auf \&quot;Abbrechen\&quot; klickt. 
Gibt den Wert \&quot;true\&quot; zurück, wenn ein neues Dokument erstellt wurde.</translation>
    </message>
    <message>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filenameShows a File Open dialog box with the caption &quot;caption&quot;. Files are filteredwith the filter string &quot;filter&quot;. A default filename or file path can alsosupplied, leave this string empty when you don&apos;t want to use it.  A value ofTrue for haspreview enables a small preview widget in the FileSelect box.  Whenthe issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialogotherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is Truethe dialog shows and returns only directories. The default for all of theoptional parameters is False.The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.For example &apos;Images (*.png *.xpm *.jpg)&apos;.Refer to the Qt-Documentation for QFileDialog for details on filters.Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)</translation>
    </message>
    <message>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="obsolete">messageBox(&quot;caption&quot;, &quot;message&quot;,icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer
Zeigt einen Dialog mit dem Titel &quot;caption&quot;, der Botschaft &quot;message&quot; und dem Symbol &quot;icon&quot; sowie
bis zu 3 Buttons an. Standard ist kein Symbol und ein OK-Button. Nur Titel und Botschaft sind
erforderliche Felder, aber Symbol und Buttons werden empfohlen.
Der Text der Botschaft kann auch einfachen HTML-Code enthalten.
Gibt die Nummer des Buttons wieder, der gedrückt wurde, beginnend mit 1.
Für Buttons und Symbole gibt es vordefinierte Konstanten, die gleichen wie in
der Qt-Dokumentation.
Die sind im Modul definiert und heissen BUTTON_* und ICON_* . Es gibt auch zwei
spezielle Konstanten, die auch den Wert 0 annehmen können: BUTTONOPT_DEFAULT aktiviert den 
jeweiligen Button per Druck auf Enter.
BUTTONOPT_ESCAPE drückt die Escape-Taste falls dieser Button gedrückt wird.
Beispiel
result = messageBox(&apos;Script failed&apos;,&apos;This script only works when you have a text frame selected.&apos;,
ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,ICON_WARNING,
BUTTON_YES|BUTTONOPT_DEFAULT, BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)
Konstanten für Buttons und Symbole:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.</translation>
    </message>
    <message>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="obsolete">valueDialog(caption, message [,defaultvalue]) -&gt; string

Zeigt einen Dialog an, der einen String verlangt und zurückgibt.
Parameter: Fenstertitel, Text im Fenster und optionaler &apos;default&apos;-Text.

Beispiel: valueDialog(&apos;TItel&apos;, &apos;Text im Fenster&apos;, &apos;optional&apos;)</translation>
    </message>
    <message>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="obsolete">newDocument(size, margins, orientation, firstPageNumber,
(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the(new line)
following meaning:(new line)
(new line)
size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.</translation>
    </message>
    <message>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="obsolete">closeDoc()

Schliesst das aktuelle Dokument, ohne Änderungen zu sichern.

Wenn kein Dokument offen ist, tritt der Fehler NoDocOpenError auf</translation>
    </message>
    <message>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="obsolete">haveDoc() -&gt; bool

Gibt True zurück, wenn ein Dokument geöffnet ist.</translation>
    </message>
    <message>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="obsolete">openDoc(&quot;name&quot;)

Öffnet das Dokument &quot;name&quot;.

Schlägt das fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="obsolete">saveDoc()

Speichert das Dokument unter dem aktuellen Namen und gibt True zurück, wenn das
erfolgreich war. Wurde das Dokument noch nicht gesichert, öffnet sich der &quot;Speichern&quot;-
Dialog.

Wenn das Sichern fehlschlägt, erscheint derzeit keine Fehlermeldung.</translation>
    </message>
    <message>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="obsolete">saveDocAs(&quot;name&quot;)

Speichert das aktuelle Dokument unter dem neuen Namen &quot;name&quot;. Die Pfadangabe kann dabei
relativ oder absolut sein.

Schlägt das Sichern fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="obsolete">setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.</translation>
    </message>
    <message>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(lr, rr, tr, br)Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)margins are given in the measurement units of the document - see UNIT_&lt;type&gt;constants.</translation>
    </message>
    <message>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="obsolete">setUnit(type)

Ändert die Masseinheit des Dokuments auf &quot;type&quot;. Mögliche Einheiten geben Sie durch die 
Konstanten UNIT_&lt;type&gt; an.

Ist die Einheit ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="obsolete">getUnit() -&gt; integer (Scribus unit constant)

Gibt die Masseinheit des Dokuments zurück. Der Rückgabewert ist eine
der möglichen UNIT_*-Konstanten:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
    </message>
    <message>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="obsolete">loadStylesFromFile(&quot;filename&quot;)

Lädt die Absatzstile aus der Datei &quot;filename&quot; in das aktuelle Dokument.</translation>
    </message>
    <message>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="obsolete">setDocType(facingPages, firstPageLeft)

Setzt den Dokumenttyp. Gegenüberliegende Seiten erreichen Sie mit FACINGPAGES, normale
Seiten mit NOFACINGPAGES. Wenn die erste Seite links sein soll, schreiben Sie FIRSTPAGELEFT, 
ansonsten FIRSTPAGERIGHT.</translation>
    </message>
    <message>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="obsolete">closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().</translation>
    </message>
    <message>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="obsolete">masterPageNames()(new line)
(new line)
Returns a list of the names of all master pages in the document.</translation>
    </message>
    <message>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="obsolete">editMasterPage(pageName)(new line)
(new line)
Enables master page editing and opens the named master page(new line)
for editing. Finish editing with closeMasterPage().</translation>
    </message>
    <message>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="obsolete">createMasterPage(pageName)(new line)
(new line)
Creates a new master page named pageName and opens it for(new line)
editing.</translation>
    </message>
    <message>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="obsolete">deleteMasterPage(pageName)(new line)
(new line)
Delete the named master page.</translation>
    </message>
    <message>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillColor([&quot;name&quot;]) -&gt; string

Gibt den Wert der Füllfarbe des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuell ausgewählt Objekt verwendet.</translation>
    </message>
    <message>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineColor([&quot;name&quot;]) -&gt; string

Gibt den Namen der Linienfarbe des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.</translation>
    </message>
    <message>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineWidth([&quot;name&quot;]) -&gt; integer

Gibt die Linienbreite des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineShade([&quot;name&quot;]) -&gt; integer

Gibt den Tonwert des Objekts &quot;name&quot; zurück.
Wenn &quot;name&quot; nicht angegeben ist, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not giventhe currently selected item is used.  The join types are:JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
    </message>
    <message>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="obsolete">getLineEnd([&quot;name&quot;]) -&gt; integer (siehe Konstanten)

Gibt den Stil der Linienrundungen des Objekts &quot;name&quot; an. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.
Die unterstützten Stile sind CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
    </message>
    <message>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="obsolete">getLineStyle([&quot;name&quot;]) -&gt; integer (siehe Konstanten)

Gibt den Linienstil des Objekts &quot;name&quot; wieder. Ist &quot;name&quot; nicht angegeben,
wird das aktuelle Objekt benutzt. Linienstile sind LINE_DASH, LINE_DASHDOT,
LINE_DASHDOTDOT, LINE_SOLID</translation>
    </message>
    <message>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillShade([&quot;name&quot;]) -&gt; integer

Gibt den Tonwert der Füllfarbe von &quot;name&quot; zurück. Ist &quot;name&quot; nicht angegeben, wird
das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.</translation>
    </message>
    <message>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getImageScale([&quot;name&quot;]) -&gt; (x,y)(

Gibt ein Zahlenpaar (x,y) zurück mit den Skalierungswerten des Bildes im Rahmen
&quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Rahmen verwendet.</translation>
    </message>
    <message>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getImageName([&quot;name&quot;]) -&gt; string

Gibt den Dateinamen des Bildes im Rahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="obsolete">getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.</translation>
    </message>
    <message>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="obsolete">getSize([&quot;name&quot;]) -&gt; (Breite,Höhe)

Gibt das Zahlenpaar (Breite,Höhe) des Objekts &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet. Die Grösse wird in der Masseinheit
des Dokuments angegeben - siehe die UNIT_*-Konstanten.</translation>
    </message>
    <message>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="obsolete">getRotation([&quot;name&quot;]) -&gt; integer

Gibt die Drehung des Objekts &quot;name&quot; in Grad zurück und im Uhrzeigersinn zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="obsolete">getAllObjects() -&gt; list

Gibt eine Liste zurück mit allen auf der aktuellen Seite verwendeten Objekte.</translation>
    </message>
    <message>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="obsolete">getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.</translation>
    </message>
    <message>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="obsolete">getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.</translation>
    </message>
    <message>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="obsolete">getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.</translation>
    </message>
    <message>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="obsolete">setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.</translation>
    </message>
    <message>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObject(dx, dy [, &quot;name&quot;])

Verschiebt das Objekt &quot;name&quot; um dx und dy relativ zur Position. Die 
Entfernungsangaben werden in der Masseinheit des Dokuments 
angegeben (siehe Konstanten UNIT*). Wenn &quot;name&quot; nicht vorhanden ist, 
wird das ausgewählte Objekt verschoben und wenn &quot;name&quot; zu einer Gruppe
gehört, wird die gesamte Gruppe verschoben.</translation>
    </message>
    <message>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObjectAbs(x, y [, &quot;name&quot;])

Bewegt das Objekt &quot;name&quot; an die neue Stelle. Die Koordinaten werden in der Masseinheit
des Dokuments angegeben (siehe UNIT_*-Konstanten). Ist &quot;name&quot; nicht angegeben, wird das
aktuelle Objekt benutzt. Gehört &quot;name&quot; zu einer Gruppe, wird die Gruppe verschoben.</translation>
    </message>
    <message>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object isrotated by the vertex that is currently selected as the rotation point - bydefault, the top left vertex at zero rotation. Positive values mean counterclockwise rotation when the default rotation point is used. If &quot;name&quot; is notgiven the currently selected item is used.</translation>
    </message>
    <message>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.</translation>
    </message>
    <message>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">sizeObject(width, height [, &quot;name&quot;])

Ändert die Grösse von &quot;name&quot; auf die Breite width und die Höhe height.
ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="obsolete">getSelectedObject([nr]) -&gt; string

Gibt den Namen des ausgewählten Objekts zurück. &quot;nr&quot; gibt die Zahl des gewählten
Objekts an. 0 bedeutet das erste ausgewählte Objekt, 1 das zweite usw.</translation>
    </message>
    <message>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="obsolete">selectionCount() -&gt; integer

Gibt die Anzahl der ausgewählten Objekte zurück.</translation>
    </message>
    <message>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="obsolete">selectObject(&quot;name&quot;)

Wählt das Objekt &quot;name&quot; aus.</translation>
    </message>
    <message>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="obsolete">deselectAll()

Setzt alle Objekte im Dokument auf nicht ausgewählt.</translation>
    </message>
    <message>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="obsolete">groupObjects(list)

Gruppiert die Elemente in &quot;list&quot;. &quot;list&quot; muss die Namen der zu gruppierenden 
Objekte enthalten. Ist &quot;list&quot; nicht angegeben, werden die aktuell gewählten 
Objekte verwendet.</translation>
    </message>
    <message>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="obsolete">unGroupObjects(&quot;name&quot;)

Zerstört die Gruppe &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird die aktuelle Gruppe verwendet.</translation>
    </message>
    <message>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="obsolete">scaleGroup(factor [,&quot;name&quot;])

Skaliert die Gruppe, zu dem das Objekt &quot;name&quot; gehört. Werte grösser als 1 vergrössern das Objekt, 
Werte kleiner als 1 verkleinert das Objekt. Zum Beispiel bedeutet 0.5 = 50 % oder 1.5=150% der 
Originalgrösse. &quot;factor&quot; muss grösser als 0 sein. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
benutzt.</translation>
    </message>
    <message>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">loadImage(&quot;filename&quot; [, &quot;name&quot;])

Lädt das Bild &quot;picture&quot; in den Bildrahmen &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, 
wird der aktuelle Rahmen benutzt.

Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf</translation>
    </message>
    <message>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;name&quot;])

Skaliert das Bild &quot;name&quot; auf die angegeben Werte. 1 bedeutet 100 %. Ist &quot;name&quot;
nicht angegeben, wird der aktuelle Bildrahmen verwendet.

Ist das Ziel kein Bildrahmen, tritt der Fehler WrongFrameTypeError auf,</translation>
    </message>
    <message>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="obsolete">lockObject([&quot;name&quot;]) -&gt; bool

Sperrt das Objekt &quot;name&quot;, wenn es freigegeben ist und entsperrt es, wenn es
gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
Gibt True zurück, wenn das Objekt gesperrt ist.</translation>
    </message>
    <message>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">isLocked([&quot;name&quot;]) -&gt; bool

Gibt True zurück, wenn &quot;name&quot; gesperrt ist. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="obsolete">setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Setzt die Eigenschaft An Rahmen anpassen für den gewählten Bildrahmen oder angegebenen
Bildrahmen.
&apos;proportional&apos; verkleinert das Bild proportional zur ursprünglichen Grösse.
Sowohl &apos;scaletoframe&apos; als auch &apos;proportional&apos; sind boolsche Werte.

Kann den Fehler WrongFrameTypeError verursachen.</translation>
    </message>
    <message>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="obsolete">setRedraw(bool)

Wenn bool=False, dann wird die Seite nicht neu neu aufgebaut (redraw ist deaktiviert).
Standard ist bool=True. Diese Einstellung bleibt bestehen, auch wenn das Script beendet ist.
Stellen Sie also sicher, dass setRedraw(True) aufgerufen wird, bevor das Script beendet wird.</translation>
    </message>
    <message>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="obsolete">getFontNames() -&gt; list

Gibt eine Liste mit allen verfügbaren Schriften zurück.</translation>
    </message>
    <message>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="obsolete">getXFontNames() -&gt; list

Gibt genaue Informationen zu einer Schrift zurück mit den Werten:
[ (Name in Scribus, Familie, wirklicher Name, Subset (1|0), embed PS (1|0), Fontdatei), (...), ... ]</translation>
    </message>
    <message>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="obsolete">renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Erzeugt ein Bild mit dem Text &quot;sample&quot; in der Schrift &quot;font&quot; und der Grösse &quot;size&quot;.
Ist &quot;filename&quot; angegeben, wird das Bild unter &quot;filename&quot; abgespeichert. Ansonsten
werden die Bilddaten als String zurückgegeben. Das optionale Argument &quot;format&quot; gibt 
an, welches Bildformat generiert werden soll. Unterstützt werden die Formate, die auch 
QPixmap.save() kennt, zum Beispiel PPM, JPEG, PNG und XPM.

Der Fehler NotFoundError tritt auf, wenn die Schrift nicht gefunden wird.
Der Fehler ValueError tritt auf, wenn &quot;sample&quot; leer ist oder der Dateiname ungültig ist.</translation>
    </message>
    <message>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="obsolete">getLayers() -&gt; list

Gibt eine Liste mit allen Ebenen zurück.</translation>
    </message>
    <message>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setActiveLayer(&quot;name&quot;)

Macht die Ebene &quot;name&quot; zur aktiven Ebene.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="obsolete">getActiveLayer() -&gt; string

Gibt die aktive Ebene zurück.</translation>
    </message>
    <message>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Verschiebt das Objekt &quot;name&quot; auf die Ebene &quot;layer&quot;. Die Ebene muss
vorhanden sein. Ist &quot;name&quot; nicht angegeben, wird das aktive Objekt benutzt.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerVisible(&quot;layer&quot;, visible)

Zeigt die Ebene &quot;layer&quot; an oder versteckt sie. Ist &quot;visible&quot; auf False gesetzt,
ist die Ebene unsichtbar.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf.
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerOutlined(&quot;layer&quot;, outline)
Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerFlow(&quot;layer&quot;, flow)
Sets the layers &quot;layer&quot;(sp)(sp)flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerBlendmode(&quot;layer&quot;, blend)
Sets the layers &quot;layer&quot;(sp)(sp)blendmode to blend.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerTransparency(&quot;layer&quot;, trans)
Sets the layers &quot;layer&quot;(sp)(sp)transparency to trans.
May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Gibt zurück, ob die Ebene gedruckt wird oder nicht. True bedeutet, dass die Ebene
gedruckt wird, False bedeutet, dass das Drucken deaktiviert ist.

Der Fehler NotFoundError tritt auf, wenn die Ebene nicht existiert.
Der Fehler ValueError tritt auf, wenn der Ebenenname ungültig ist.</translation>
    </message>
    <message>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">deleteLayer(&quot;layer&quot;)

Löscht die Ebene &quot;layer&quot;. Ist die Ebene nicht vorhanden oder ist nur eine
Ebene vorhanden, passiert gar nichts.

Ist die Ebene nicht vorhanden, tritt der Fehler NotFoundError auf,
Ist der Name der Ebene ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">createLayer(layer)

Erzeugt einen Ebene mit dem Namen &quot;layer&quot;.

Ist der Name ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="obsolete">getGuiLanguage() -&gt; string

Gibt den Wert der Variable -lang zurück.</translation>
    </message>
    <message>
        <source>moveSelectionToFront()

Moves current selection to front.
</source>
        <translation type="obsolete">moveSelectionToFront()
Moves current selection to front.</translation>
    </message>
    <message>
        <source>moveSelectionToFront()

Moves current selection to back.
</source>
        <translation type="obsolete">moveSelectionToFront()
Moves current selection to back.</translation>
    </message>
    <message>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt ein neues Rechteck auf der aktuellen Seite und gibt seinen Namen zurück. Die
Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe UNIT-Konstanten).
&quot;name&quot; sollte eine eindeutige Identifikation des Rechtecks ermöglichen, weil Sie den Objekt-
namen immer wieder benötigen. Ist &quot;name&quot; nicht vorhanden, wählt Scribus einen Namen für Sie.

Wenn Sie einen schon verwendeten Namen benutzen, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt eine Ellipse auf der aktuellen Seite und gibt ihren Namen zurück. Die Koordinaten
werden in der Masseinheit des Dokuments angegeben (siehe UNIT-Konstanten). &quot;name&quot; sollte
das Objekt eindeutig identifizieren, weil Sie den Namen für spätere Zwecke brauchen. Ist &quot;name&quot;
nicht angegeben, erzeugt Scribus einen Namen für das Objekt.

Ist der Name schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt einen Bildrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Erzeugt einen neuen Textrahmen auf der aktuellen Seite und gibt seinen Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Erzeugt eine Linie von P(x1,y1) zu P(x2,y2) und gibt ihren Namen zurück.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.</translation>
    </message>
    <message>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolyLine(list, [&quot;name&quot;]) -&gt; string

Erzeugt eine Mehrfachlinie und und gibt ihren Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn].
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht genügend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createPolygon(list, [&quot;name&quot;]) -&gt; string

Erzeugt ein Vieleck und gibt seinen Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: [x1, y1, x2,...xn, yn]. Sie müssen
mindestens 3 Punkte angeben, aber Sie müssen den ersten Punkt nicht zum
Schliessen des Polygons erneut angeben - das geschieht automatisch.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="obsolete">createBezierLine(list, [&quot;name&quot;]) -&gt; string

Erzeugt eine Bézierkurve und gibt ihren Namen zurück. Die Punkte werden in
der folgenden Reihenfolge gespeichert: 
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]. 
x und y steht dabei für die X- und Y-Koordinaten und kx und ky steht für den
Kontrollpunkt der Kurve. 
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Ist die Anzahl der Punkte nicht ausreichend, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="obsolete">createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Erzeugt Text auf einem Pfad, indem die Objekte &quot;textbox&quot; und &quot;beziercurve&quot;
zusammengefügt werden.
Die Koordinaten werden in der Masseinheit des Dokuments angegeben (siehe
UNIT-Konstanten). &quot;name&quot; sollte das Objekt eindeutig identifizieren, weil Sie den
Namen für spätere Zwecke benötigen. Wenn Sie &quot;name&quot; nicht angeben, legt Scribus
einen Namen für das Objekt fest.

Ist das Objekt schon vorhanden, tritt der Fehler NameExistsError auf.
Sind ein oder beide Objekte nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
    </message>
    <message>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="obsolete">deleteObject([&quot;name&quot;])

Löscht das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt gelöscht.</translation>
    </message>
    <message>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="obsolete">textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).(new line)
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.</translation>
    </message>
    <message>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="obsolete">objectExists([&quot;name&quot;]) -&gt; bool

Gibt an, ob das Objekt mit dem Name &quot;name&quot; auch wirklich im aktuellen Dokument
existiert. &quot;name&quot; ist optional, ist &quot;name&quot; nicht angegeben, wird True ausgegeben, wenn
gerade ein Objekt selektiert ist.</translation>
    </message>
    <message>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="obsolete">setStyle(&quot;style&quot; [, &quot;name&quot;])

Setzt den Absatzstil &quot;style&quot; für das Objekt &quot;name&quot;. Ist kein Objekt angegeben,
wird der Stil auf das aktuelle Objekt angewendet.</translation>
    </message>
    <message>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="obsolete">getAllStyles() -&gt; list

Gibt eine Listen mit allen Absatzstilen im aktuellen Dokument zurück.</translation>
    </message>
    <message>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="obsolete">duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).</translation>
    </message>
    <message>
        <source>converTo(type,[&quot;name&quot;]) -&gt; None

converts the item to a different type (as declared in pageitem.h).
</source>
        <translation type="obsolete">converTo(type,[&quot;name&quot;]) -&gt; Noneconverts the item to a different type (as declared in pageitem.h).</translation>
    </message>
    <message>
        <source>getFileName() -&gt; string

Returns the document&apos;s filename.
</source>
        <translation type="obsolete">getFileName() -&gt; stringReturns the document&apos;s filename.</translation>
    </message>
    <message>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">newPage(where [,&quot;masterpage&quot;])

Erzeugt eine neue Seite. Falls &quot;where&quot; -1 ist, wird die neue Seite an das Dokument angefügt,
ansonsten wird die neue Seite vor &quot;where&quot; eingefügt. Seitennummern werden von 1 ab hoch-
gezählt, egal welches die angezeigte erste Seitennummer Ihres Dokumentes ist. Der optionale
Parameter &quot;masterpage&quot; legt den Namen der Musterseite für die neue Seite fest</translation>
    </message>
    <message>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="obsolete">currentPage() -&gt; integer

Gibt die Nummer der aktuellen Seite zurück. Seitenzahlen werden ab 1 gezählt, egal welche
Seitenzahl auf der aktuellen Seite angezeigt wird.</translation>
    </message>
    <message>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="obsolete">redrawAll()

Baut alle Seiten neu auf.</translation>
    </message>
    <message>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="obsolete">getPageType() -&gt; integerReturns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page</translation>
    </message>
    <message>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="obsolete">savePageAsEPS(&quot;name&quot;)

Speichert die aktuelle Seite als EPS-Datei mit dem Namen &quot;name&quot;.

Schlägt das Speichern fehl, tritt der Fehler ScribusError auf.</translation>
    </message>
    <message>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">deletePage(nr)

Löscht die Seite mit der Nummer &quot;nr&quot;. Besteht das Dokument nur aus einer Seite, passiert nichts.
Seitenzahlen werden von 1 aufwärts gezählt, egal, welche Seitenzahl Sie auf der aktuellen Seite
im Dokument sehen.

Ist die Seitenzahl ungültig, tritt der Fehler IndexError auf</translation>
    </message>
    <message>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="obsolete">gotoPage(nr)Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note thatgotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, itjust sets the page that script commands will operates on.May raise IndexError if the page number is out of range.</translation>
    </message>
    <message>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="obsolete">pageCount() -&gt; integer

Gibt die Anzahl der Seiten im Dokument zurück.</translation>
    </message>
    <message>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="obsolete">getHGuides() -&gt; list

Gibt eine Liste zurück, die die Position der horizontalen Hilfslinien enthält. Die Werte
werden in der Masseinheit des Dokuments angegeben, siehe UNIT-Konstanten.</translation>
    </message>
    <message>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="obsolete">setHGuides(list)

Legt horizontale Hilfslinien fest, list muss eine Liste der Linien sein, angegeben in der Masseinheit
des Dokuments, siehe UNIT-Konstanten.

Beispiel:
setHGuides(getHGuides() + [200.0, 210.0] # fügt eine neue Hilfslinie hinzu
</translation>
    </message>
    <message>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="obsolete">getVGuides()

Siehe getHGuides.</translation>
    </message>
    <message>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="obsolete">setVGuides()

Siehe setHGuides.</translation>
    </message>
    <message>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="obsolete">getPageSize() -&gt; tuple

Gibt eine Liste mit der Seitengrösse in der aktuellen Masseinheit zurück, siehe
UNIT-Konstanten und getPageMargins()</translation>
    </message>
    <message>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="obsolete">getPageItems() -&gt; list

Gibt eine Liste zurück mit den Objekten auf der aktuelle Seite. Die Reihenfolge
der Werte ist: (Name, Typ des Objekts, Anordnung).

Beispiel: [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)] bedeutet, dass das Objekt Text1 heisst, 
ein Textrahmen ist  (type 4) und sich auf der ersten Seite befindet...</translation>
    </message>
    <message>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="obsolete">getPageMargins()

Gibt die Seitenränder als ein Tupel in der gerade aktiven Einheit zurück (oben, unten, links, rechts).
Mögliche Einheiten finden Sie bei UNIT_&lt;tye&gt; und getPageSize().
</translation>
    </message>
    <message>
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
        <translation type="obsolete">importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document</translation>
    </message>
    <message>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="obsolete">setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Füllt das Objekt &quot;name&quot; mit einem Farbverlauf. Farbbezeichnungen sind die
gleichen wie für setFillColor() und setFillShade(). Siehe Konstanten
für mögliche Typen (FILL_&lt;type&gt;).</translation>
    </message>
    <message>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setFillColor(&quot;color&quot;, [&quot;name&quot;])

Setzt die Füllfarbe &quot;color&quot; für das Objekt &quot;name&quot;. &quot;color&quot; ist der Name einer
vorhandenen Farbe. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
verwendet.</translation>
    </message>
    <message>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])
Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])
Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineColor(&quot;color&quot;, [&quot;name&quot;])

Setzt die Linienfarbe &quot;color&quot; für das Objekt &quot;name&quot;. Ist &quot;name&quot; nicht angegeben, 
wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])
Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])
Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="obsolete">setLineWidth(width, [&quot;name&quot;])

Setzt die Linienbreite für das Objekt &quot;name&quot; auf &quot;width&quot;. &quot;width&quot; muss zwischen 
0.0 und 12.0 gross sein und wird in Punkt angegeben. Ist &quot;name&quot; nicht angegeben,
wird das aktuelle Objekt verwendet.

Ist die Linienbreite ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="obsolete">setLineShade(shade, [&quot;name&quot;])

Setzt den Tonwert der Linie des Objekts &quot;name&quot; auf &quot;shade&quot;. &quot;shade&quot; ist eine
ganze Zahl zwischen 0 und 100. Ist &quot;name&quot; nicht angegeben, wird das aktuelle 
Objekt verwendet.

Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="obsolete">setLineJoin(join, [&quot;name&quot;])

Setzt die Ecken der Linien des Objekts &quot;name&quot; auf den Stil join.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Obekt verwendet.
Benutzen Sie die vorgegeben Konstaten des Typs JOIN_*.</translation>
    </message>
    <message>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="obsolete">SetLineEnd(endtype, [&quot;name&quot;])

Setzt die Linienenden des Objekts &quot;name&quot; auf den Stil &quot;endtype&quot;.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.
Benutzen Sie die vorgegebenen Konstanten des Typs CAP_*.</translation>
    </message>
    <message>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="obsolete">setLineStyle(style, [&quot;name&quot;])

Setzt den Linienstil des Objekts &quot;name&quot; auf den Stil &quot;style&quot;. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet. Benutzen Sie die
vorgegebenen Konstanten des Typs LINE_*.</translation>
    </message>
    <message>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="obsolete">setFillShade(shade, [&quot;name&quot;])

Setzt den Tonwert der Füllfarbe für das Objekt &quot;name&quot; auf &quot;shade&quot;.
&quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein. Ist &quot;name&quot;
nicht angegeben, wird das aktuelle Objekt benutzt.

Ist der Tonwert ungültig, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="obsolete">setCornerRadius(radius, [&quot;name&quot;])

Setzt den Eckradius für das Objekt &quot;name&quot; auf radius. Der Radius wird
in Punkt angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.

Ist der Eckradius negativ, tritt der Fehler ValueError auf.</translation>
    </message>
    <message>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="obsolete">setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Setzt den Linienstil für das Objekt &quot;name&quot; auf den angegebenen Stil.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Stil benutzt.

Ist der Stil nicht vorhanden, tritt der Fehler NotFoundError auf.</translation>
    </message>
    <message>
        <source>createParagraphStyle(...)

Creates a paragraph style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create

linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:

fixed linespacing:          0

automatic linespacing:      1

baseline grid linespacing:  2

linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing

alignment [optional] -&gt; specifies the alignment of the paragraph

-&gt; left:     0

-&gt; center:   1

-&gt; right:    2

-&gt; justify:  3

-&gt; extend:   4

leftmargin [optional], rightmargin [optional] -&gt; specify the margin

gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs

firstindent [optional] -&gt; the indent of the first line

hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)

dropcaplines [optional] -&gt; height (in lines) of the caps if used

dropcapoffset [optional] -&gt; offset of the caps if used

&quot;charstyle&quot; [optional] -&gt; char style to use

</source>
        <translation type="obsolete">createParagraphStyle(...)Creates a paragraph style. This function takes the following keyword parameters:&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to createlinespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:fixed linespacing:          0automatic linespacing:      1baseline grid linespacing:  2linespacing [optional] -&gt; specifies the linespacing if using fixed linespacingalignment [optional] -&gt; specifies the alignment of the paragraph-&gt; left:     0-&gt; center:   1-&gt; right:    2-&gt; justify:  3-&gt; extend:   4leftmargin [optional], rightmargin [optional] -&gt; specify the margingapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphsfirstindent [optional] -&gt; the indent of the first linehasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)dropcaplines [optional] -&gt; height (in lines) of the caps if useddropcapoffset [optional] -&gt; offset of the caps if used&quot;charstyle&quot; [optional] -&gt; char style to use</translation>
    </message>
    <message>
        <source>createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline

-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code

</source>
        <translation type="obsolete">createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline


-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code</translation>
    </message>
    <message>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFontSize([&quot;name&quot;]) -&gt; float

Gibt die Schriftgrösse in Punkten für den Textrahmen &quot;name&quot; zurück. Wenn innerhalb
des Rahmens Text markiert ist, wird die Schriftgrösse des ersten Zeichens verwendet.
Wenn &quot;name&quot; nicht vergeben ist, wird der selektierte Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getFont([&quot;name&quot;]) -&gt; string

Gibt den Namen der Schrift für den Textrahmen &quot;name&quot; zurück. Ist in
dem Textfeld Text ausgewählt, wird die Schrift des ersten gewählten
Zeichens angegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt
verwendet.</translation>
    </message>
    <message>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextLength([&quot;name&quot;]) -&gt; integer

Gibt die Länge des Textes im Textrahmen &quot;name&quot; zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">getText([&quot;name&quot;]) -&gt; string

Gibt den Text aus dem Textrahmen &quot;name&quot; zurück. Ist in dem Textfeld Text markiert,
wird der selektierte Text zurückgegeben. Der gesamte Text wird zurückgegeben, nicht
nur der sichtbare Teil des Textes, Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">getAllText([&quot;name&quot;]) -&gt; string

Gibt den Text aus dem Textrahmen &quot;name&quot; zurück und aus allen Rahmen, die mit
dem Rahmen &quot;name&quot; verbunden sind. Ist in dem Textfeld Text markiert,
wird der selektierte Text zurückgegeben. Ist &quot;name&quot; nicht angegeben, wird das aktuelle
Objekt verwendet.</translation>
    </message>
    <message>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineSpacing([&quot;name&quot;]) -&gt; float

Gibt den Zeilenabstand für den Textrahmen &quot;name&quot; in Punkten zurück.
Ist &quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple

Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">getTextDistances([&quot;name&quot;]) -&gt; tupleReturns the text distances of the text frame &quot;name&quot; expressed in points. Thedistances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;is not given the currently selected item is used.</translation>
    </message>
    <message>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getColumnGap([&quot;name&quot;]) -&gt; float

Gibt den Zeilenabstand für den Text im Rahmen &quot;name&quot; in Punkten zurück. Ist
&quot;name&quot; nicht angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getColumns([&quot;name&quot;]) -&gt; integer

Gibt die Anzahl der Spalten im Textrahmen &quot;name&quot; zurück. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt verwendet.</translation>
    </message>
    <message>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setText(&quot;text&quot;, [&quot;name&quot;])

Ändert den Text im Rahmen &quot;name&quot; auf den String &quot;text&quot;.
Der Text muss URF8-kodiert sein - verwenden Sie z.B. unicode(text, &apos;iso-8859-2&apos;).
Lesen Sie in der FAQ nach für weitere Informationen. Ist &quot;name&quot; nicht angegeben, 
wird der aktuelle Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="obsolete">nsertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.</translation>
    </message>
    <message>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="obsolete">setFont(&quot;font&quot;, [&quot;name&quot;])

Setzt die Schrift für den Rahmen &quot;name&quot; auf &quot;font&quot;. Ist Text ausgewählt,
wird nur die Markierung verändert. Ist &quot;name&quot; nicht angegeben, wird der
aktuelle Textrahmen verwendet.

Ist die Schrift ungültig, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="obsolete">setFontSize(size, [&quot;name&quot;])

Setzt die Schriftgrösse im Textrahmen &quot;name&quot; auf den Wert &quot;size&quot;. &quot;size&quot; ist
ein Wert in Punkten zwischen 1 und 512. Ist eine Markierung vorhanden, wird
nur die die Markiertung verändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
Textrahmen verwendet.

Ist die Schriftgrösse ungültig, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="obsolete">setLineSpacing(size, [&quot;name&quot;])

Setzt den Zeilenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
&quot;size&quot; ist ein Wert in Punkten. Ist &quot;name&quot; nicht angegeben, wird der
aktuelle Textrahmen verwendet.

Ist der Wert für Zeilenabstand ungültig, wird der Fehler ValueError
ausgegeben.</translation>
    </message>
    <message>
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])

Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.

May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
        <translation type="obsolete">setTextDistances(left, right, top, bottom, [&quot;name&quot;])Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currentlyselected item is used.May throw ValueError if any of the distances are out of bounds (must be positive).</translation>
    </message>
    <message>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="obsolete">setColumnGap(size, [&quot;name&quot;])

Setzt den Spaltenabstand im Rahmen &quot;name&quot; auf den Wert &quot;size&quot;.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.

Ist der Abstand nicht positiv, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="obsolete">setColumns(nr, [&quot;name&quot;])

Legt die Anzahl der Spalten im Textrahmen &quot;name&quot; fest auf &quot;nr&quot; fest.
Wenn &quot;name&quot; nicht angegeben ist, wird der aktuelle Textrahmen verwendet.

Ist die Anzahl der Spalten kleiner als 1, wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="obsolete">setTextAlignment(align, [&quot;name&quot;])

Richtet den Text in dem Objekt &quot;name&quot; nach der Art &quot;align&quot; aus. Ist &quot;name&quot;
nicht angegeben, wird der aktuelle Textrahmen verwendet. &quot;align&quot; ist eine der
ALIGN_*-Konstanten. Siehe dir(scribus).

Bei einem falschen Argument wird der Fehler ValueError ausgegeben.</translation>
    </message>
    <message>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="obsolete">selectText(start, count, [&quot;name&quot;])

Markiert &quot;count&quot; Zeichen des Textrahmens &quot;name&quot; beginnend mit dem Zeichen &quot;start&quot;. 
Die Zählung beginnt bei 0. Wenn &quot;count&quot;=0 ist, wird die Markierung gelöscht. Wenn &quot;name&quot;
nicht angegeben ist, wird der aktuelle Textrahmen verwendet.

Wenn die Werte ungültig sind, wird der Fehler IndexError ausgegeben.</translation>
    </message>
    <message>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">deleteText([&quot;name&quot;])

Löscht den Textrahmen &quot;name&quot;. Wenn Text ausgewählt ist, wird nur die Markierung
gelöscht. Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen gelöscht.</translation>
    </message>
    <message>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">setTextColor(&quot;color&quot;, [&quot;name&quot;])

Ändert die Farbe des Textes auf &quot;color&quot;. Wenn Text ausgewählt ist, wird die
Markierung auf &quot;color&quot; geändert. Ist &quot;name&quot; nicht angegeben, wird der aktuelle
Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="obsolete">setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Setzt die Farbe &quot;color&quot; für die Umrandung des Textes. Ist &quot;name&quot; nicht angegeben, wird der aktuelle 
Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="obsolete">setTextShade(shade, [&quot;name&quot;])

Setzt den Tonwert für den Textrahmen &quot;name&quot; auf &quot;shade&quot;.
Ist Text in dem Rahmen ausgewählt, wird nur der ausgewählt Text
verändert. &quot;shade&quot; muss eine ganze Zahl zwischen 0 und 100 sein.
Ist &quot;name&quot; nicht vorhanden oder angegeben, wird der aktuelle Rahmen verwendet.</translation>
    </message>
    <message>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Zwei Textrahmen verketten. &quot;Fromname&quot; wird mit &quot;Toname&quot; verkettet. Der Zielrahmen
muss leer sein und darf nicht mit anderen Rahmen verkettet sein.

Werden die Regeln verletzt, erscheint der Fehler ScribusException.</translation>
    </message>
    <message>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="obsolete">unlinkTextFrames(&quot;name&quot;)

Entfernt den Textrahmen &quot;name&quot; aus der Reihe der verketteten Rahmen. Ist der
zu entfernende Rahmen einer aus der Mitte der Reihe, wird der vorherige und nächste
Rahmen miteinander verkettet, z.B. wird aus a-&gt;b-&gt;c dann a-&gt;c, wenn Sie Rahmen b
entfernen.

Wenn die Verkettungsregeln gebrochen werden, erscheint der Fehler ScribusException.</translation>
    </message>
    <message>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="obsolete">traceText([&quot;name&quot;])

Konvertiert den Textrahmen &quot;name&quot; in Umrisse. Ist &quot;name&quot; nicht vorhanden oder 
vorgegeben, wird der aktuelle Textrahmen verwendet.</translation>
    </message>
    <message>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="obsolete">isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable</translation>
    </message>
    <message>
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.If &quot;name&quot; is not given the currently selected item is used.May raise WrongFrameTypeError if the target frame is not a text frame</translation>
    </message>
    <message>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">isPDFBookmark([&quot;name&quot;]) -&gt; bool

Gibt zurück, ob der Textrahmen &quot;name&quot; ein PDF-Lesezeichen ist.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.

Der Fehler WrongFrameTypeError tritt auf, wenn der Zielrahmen kein Textrahmen ist</translation>
    </message>
    <message>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="obsolete">messagebarText(&quot;string&quot;)

Schreibt &quot;string&quot; in die Statuszeile von Scribus. Der Text muss
UTF8-kodiert oder ein &apos;unicode&apos;-String sein (empfohlen).</translation>
    </message>
    <message>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="obsolete">progressReset()

Löscht die Fortschrittsanzeige. Wird aufgerufen, bevor eine neue Verlaufsanzeige benutzt wird.
Siehe progressSet.</translation>
    </message>
    <message>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="obsolete">progressTotal(max)

Setzt die Gesamtzahl der Schritte für die Fortschrittsanzeige. Siehe progressSet.</translation>
    </message>
    <message>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="obsolete">progressSet(nr)

Die Fortschrittsanzeigen auf &quot;nr&quot; setzen, ein Wert relativ zum vorher festgelegten Wert
für progressTotal. Die Fortschrittsanzeige verwendet Schritte zum Anzeigen des Verlaufs:
Sie geben die Gesamtzahl der Schritte an und dann immer die fertigen Schritte - die Verlaufs-
anzeige zeigt immer den Prozentsatz der fertigen Schritte an. Die Gesamtzahl der Schritte können
Sie mit progressTotal() festlegen, die aktuelle Zahl der Schritte mit progressSet().
Die Fortschrittsanzeige kann mit progressReset() zurückgesetzt werden. [Infos sind aus den 
Dokumenten von Trolltech Qt]</translation>
    </message>
    <message>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="obsolete">setCursor()

[nicht unterstützt!] Bitte verwenden Sie diese Funktion zur Zeit noch nicht.</translation>
    </message>
    <message>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="obsolete">docChanged(bool)

Aktiviert/Deaktivert das Icon zum Speichern und den entsprechenden Eintrag im Datei-Menü.
Wenn Sie ein Dokument verändert ist es hilfreich, diese Funktion aufzurufen, weil Scribus im Script-
Modus nicht automatisch erkennt, wann ein Dokument verändert wurde.</translation>
    </message>
    <message>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="obsolete">zoomDocument(double)(new line)
(new line)
Zoom the document in main GUI window. Actions have whole number(new line)
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.</translation>
    </message>
    <message>
        <source>scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</source>
        <translation type="obsolete">scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</translation>
    </message>
    <message>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="obsolete">placeSVG(&quot;filename&quot;, x, y)
Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page
If loading was successful, the selection contains the imported SVG</translation>
    </message>
    <message>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="obsolete">placeEPS(&quot;filename&quot;, x, y)
Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page
If loading was successful, the selection contains the imported EPS</translation>
    </message>
    <message>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="obsolete">placeSXD(&quot;filename&quot;, x, y)
Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page
If loading was successful, the selection contains the imported SXD</translation>
    </message>
    <message>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="obsolete">placeODG(&quot;filename&quot;, x, y)
Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page
If loading was successful, the selection contains the imported ODG</translation>
    </message>
    <message>
        <source>importSVG(&quot;string&quot;)

The &quot;string&quot; must be a valid filename for a SVG image. The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="obsolete">&quot;string&quot; muss ein gültiger Dateiname einer SVG-Datei sein. Der Text
muss UTF8-kodiert oder ein Unicode-String (empfohlen) sein.</translation>
    </message>
    <message>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(lr, rr, tr, br)

Verändert die Ränder des Dokuments. Links=lr, Rechts=rr, Oben=tr, Unten=br.
Die Einheit wird durch die Masseinheit des Dokuments vorgegeben, siehe die
Konstanten UNIT_&lt;type&gt;.</translation>
    </message>
    <message>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="obsolete">getLineJoin([&quot;name&quot;]) -&gt; integer (siehe Konstanten)

Gibt den Stil der Ecken des Objekts &quot;name&quot; zurück. Ist kein &quot;name&quot; angegeben, wird
das aktuelle Objekt benutzt. Die Linientypen sind JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
    </message>
    <message>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">rotateObject(rot [, &quot;name&quot;])

Dreht das Objekt &quot;name&quot; relativ um &quot;rot&quot; Grad. Beim Drehen wird der Ursprung verwendet,
der gerade aktiv ist - normalerweise der Punkt links oben. Positive Werte für &quot;rot&quot; bedeuten
Drehung in Uhrzeigersinn, negative Werte Drehung gegen den Uhrzeigersinn. Ist &quot;name&quot; nicht
angegeben, wird das aktuelle Objekt benutzt.</translation>
    </message>
    <message>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="obsolete">gotoPage(nr)

Geht zur Seite &quot;nr&quot;, das heisst, die Seite &quot;nr&quot; wird zur aktuellen Seite. Zur Zeit ändert
sich allerdings nicht die Seite, die der User sieht, es wird nur intern die aktuelle
Seite geändert.

Ist die Seitenzahl ungültig, tritt der Fehler IndexError auf.</translation>
    </message>
    <message>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="obsolete">setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Legt fest (toggle=1), ob der Textrahmen &quot;name&quot; ein Lesezeichen ist oder nicht.
Ist &quot;name&quot; nicht angegeben, wird der aktuelle Textrahmen verwendet.

Der Fehler WrongFrameTypeError tritt auf, wenn der Zielrahmen kein Textrahmen ist</translation>
    </message>
    <message>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Zeigt einen Datei öffnen-Dialog mit der Beschriftung &quot;caption&quot;. Dateien werden
gefiltert mit dem String &quot;filter&quot;. Ein Standard-Dateiname oder -pfad kann auch
angegeben werden. Lassen Sie diesen String leer, wenn Sie ihn nicht verwenden
möchten. Der Wert &quot;True&quot; für &quot;haspreview&quot; aktiviert die Dateivorschau im FileSelect-
Dialog. Wenn der &quot;issave&quot;-Parameter den Wert &quot;True&quot; hat, verhält sich der Dialog wie
der &quot;Speichern unter&quot;-Dialog, ansonsten wie der &quot;Date öffnen&quot;-Dialog. Wenn der &quot;isdir&quot;-
Parameter den Wert &quot;True&quot; hat, zeigt der Dialog lediglich Verzeichnisse an. Der Standard-
wert aller optionalen Parameter ist &quot;False&quot;</translation>
    </message>
    <message>
        <source>getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.
</source>
        <translation type="obsolete">getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.</translation>
    </message>
    <message>
        <source>getChild(object, childname, ofclass=None, recursive=True)

Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</source>
        <translation type="obsolete">getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.</translation>
    </message>
    <message>
        <source>setLayerOutlined&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerOutlined&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerFlow&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerFlow&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;(sp)(sp)flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerBlendmode&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerBlendmode&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;(sp)(sp)blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setLayerTransparency&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerTransparency&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;(sp)(sp)transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.</translation>
    </message>
    <message>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.</translation>
    </message>
    <message>
        <source>Copy #%1 of </source>
        <translation type="obsolete">Kopie #%1 von</translation>
    </message>
</context>
<context>
    <name>AIPlug</name>
    <message>
        <location filename="../../scribus/plugins/import/ai/importai.cpp" line="343"/>
        <source>Importing: %1</source>
        <translation>Importiere: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ai/importai.cpp" line="346"/>
        <source>Analyzing File:</source>
        <translation>Analysieren der Datei:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ai/importai.cpp" line="2341"/>
        <source>Group%1</source>
        <translation>Gruppe%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ai/importai.cpp" line="3440"/>
        <source>Generating Items</source>
        <translation>Objekte werden erstellt</translation>
    </message>
</context>
<context>
    <name>About</name>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="297"/>
        <source>Contributions from:</source>
        <translation>Beiträge von:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="175"/>
        <source>&amp;About</source>
        <translation>Ü&amp;ber</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="188"/>
        <source>A&amp;uthors</source>
        <translation>A&amp;utoren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="202"/>
        <source>&amp;Translations</source>
        <translation>Über&amp;setzungen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="213"/>
        <source>&amp;Online</source>
        <translation>&amp;Online</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="254"/>
        <source>&amp;Close</source>
        <translation>Sch&amp;liessen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="287"/>
        <source>Development Team:</source>
        <translation>Entwicklerteam:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="295"/>
        <source>Haiku Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="299"/>
        <source>Official Documentation:</source>
        <translation>Offizielle Dokumentation:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="303"/>
        <source>Other Documentation:</source>
        <translation>Andere Dokumentationen:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="337"/>
        <source>Homepage</source>
        <translation>Homepage</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="339"/>
        <source>Online Reference</source>
        <translation>Onlinereferenz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="343"/>
        <source>Bugs and Feature Requests</source>
        <translation>Fehler und Featurewünsche</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="347"/>
        <source>Mailing List</source>
        <translation>Mailingliste</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="321"/>
        <source>Official Translations and Translators:</source>
        <translation>Offizielle Übersetzungen und Übersetzer:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="323"/>
        <source>Previous Translation Contributors:</source>
        <translation>Ehemalige Übersetzer:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="95"/>
        <source>About Scribus %1</source>
        <translation>Über Scribus %1</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="341"/>
        <source>Wiki</source>
        <translation>Wiki</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="123"/>
        <source>%1 %2 %3</source>
        <translation>%1 %2 %3</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="131"/>
        <source>%3-%2-%1 %4 %5</source>
        <translation>%3-%2-%1 %4 %5</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="170"/>
        <source>Using Ghostscript version %1</source>
        <translation>Ghostscript-Version: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="172"/>
        <source>No Ghostscript version available</source>
        <translation>Ghostscript ist nicht vorhanden</translation>
    </message>
    <message>
        <source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
        <translation type="obsolete">&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="173"/>
        <source>Build ID:</source>
        <translation>Build ID:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="289"/>
        <source>Mac OS&amp;#174; X Aqua Port:</source>
        <translation>Mac OS&amp;#174; X Aqua Portierung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="293"/>
        <source>Windows&amp;#174; Port:</source>
        <translation>Windows&amp;#174; Portierung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="309"/>
        <source>Tango Project Icons:</source>
        <translation>Icons aus dem Tango-Projekt:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="216"/>
        <source>&amp;Updates</source>
        <translation>&amp;Updates</translation>
    </message>
    <message>
        <source>Check for &amp;Updates</source>
        <translation type="obsolete">Auf Updates über&amp;prüfen</translation>
    </message>
    <message>
        <source>This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation type="obsolete">Diese Leiste zeigt die Version, das Build-Datum und die kompilierte Unterstützung für Programmbibliotheken. C-C-T-F bedeutet im einzelnen: 
C= littleCMS C=CUPS, T=TIFF-Unterstützung, F=Fontconfig-Unterstützung. Der zusätzliche Buchstabe am Ende bezeichnet den Renderer, nämlich entweder C (Cairo) oder A (libart). Wird eine der Bibliotheken nicht unterstützt, steht statt dessen ein *. Hier wird auch die von Scribus gefundene Ghostscript-Version angezeigt. Die Windows-Version benutz weder fontconfig noch CUPS.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="266"/>
        <source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
        <translation>Auf Updates für Scribus überprüfen. Es werden keine Daten von Ihrem Computer übertragen.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="291"/>
        <source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
        <translation>OS/2&amp;#174;/eComStation&amp;#8482; Portierung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="307"/>
        <source>Splash Screen:</source>
        <translation>Startbild:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="262"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus.</source>
        <translation>Dieses Feld zeigt die Version, das Herstellungsdatum und die Bibliotheken mit denen Scribus kompiliert wurde.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="263"/>
        <source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
        <translation>C-C-T-F bedeutet: C=littlecms, C=CUPS, T=TIFF-Unterstützung, F=Fontconfig-Unterstützung. Der letzte Buchstabe zeigt den Renderer an: C=Cairo oder Q=Qt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="264"/>
        <source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation>Wenn eine Bibliothek nicht unterstützt wird, zeigt dies ein * an. Auch die Ghstscript-Version, die Scribus gefunden hat, wird hier angezeigt.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="265"/>
        <source>The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation>Die Windows-Version benutzt weder Fontconfig noch CUPS.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="173"/>
        <source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
        <translation>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="173"/>
        <source>Scribus Version</source>
        <translation>Scribus-Version</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="220"/>
        <source>Check for Updates</source>
        <translation>Suche nach Aktualisierungen</translation>
    </message>
    <message>
        <source>Abort Update Check</source>
        <translation type="obsolete">Suche nach Aktualisierungen abbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="345"/>
        <source>Developer Blog</source>
        <translation>Entwickler-Blog</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="227"/>
        <source>&amp;Licence</source>
        <translation>&amp;Lizenz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="236"/>
        <source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
        <translation>Die Lizenzdatei konnte nicht geöffnet werden. Bitte suchen Sie im Scribus-Installationsverzeichnis oder auf der Scribus-Website nach den Lizenzinformationen.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="301"/>
        <source>Doc Translators:</source>
        <translation>Übersetzer der Dokumentation:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="305"/>
        <source>Webmasters:</source>
        <translation>Webmaster:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/about.cpp" line="440"/>
        <location filename="../../scribus/ui/about.cpp" line="554"/>
        <location filename="../../scribus/ui/about.cpp" line="621"/>
        <source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
        <translation>Datei %1 kann nicht geöffnet werden. Bitte überprüfen Sie das Installationsverzeichnis oder besuchen Sie die Scribus-Website, um Informationen über %1 zu erhalten.</translation>
    </message>
</context>
<context>
    <name>AboutPlugins</name>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="68"/>
        <source>Filename:</source>
        <translation>Dateiname:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="69"/>
        <source>Version:</source>
        <translation>Version:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="72"/>
        <source>Enabled:</source>
        <translation>Aktiviert:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="73"/>
        <source>Release Date:</source>
        <translation>Datum der Veröffentlichung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="80"/>
        <source>Description:</source>
        <translation>Beschreibung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="81"/>
        <source>Author(s):</source>
        <translation>Autor(en):</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="82"/>
        <source>Copyright:</source>
        <translation>Urheberrecht:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.cpp" line="83"/>
        <source>License:</source>
        <translation>Lizenz:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aboutplugins.ui" line="13"/>
        <source>Scribus: About Plug-ins</source>
        <translation>Scribus: Über die Plug-Ins</translation>
    </message>
</context>
<context>
    <name>AboutPluginsBase</name>
    <message>
        <source>Scribus: About Plug-ins</source>
        <translation type="obsolete">Scribus: Über die Plug-Ins</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Sch&amp;liessen</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>ActionManager</name>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1421"/>
        <source>&amp;New</source>
        <translation>&amp;Neu</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1423"/>
        <source>&amp;Open...</source>
        <translation>Ö&amp;ffnen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1424"/>
        <source>&amp;Close</source>
        <translation>Sch&amp;liessen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1425"/>
        <source>&amp;Save</source>
        <translation>&amp;Speichern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1426"/>
        <source>Save &amp;As...</source>
        <translation>Speichern &amp;unter...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1427"/>
        <source>Re&amp;vert to Saved</source>
        <translation>Neu la&amp;den</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1428"/>
        <source>Collect for O&amp;utput...</source>
        <translation>Für Aus&amp;gabe sammeln...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1429"/>
        <source>Get Text...</source>
        <translation>Text laden...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1430"/>
        <source>Append &amp;Text...</source>
        <translation>&amp;Text anfügen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1431"/>
        <source>Get Image...</source>
        <translation>Bild laden...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1434"/>
        <source>Save &amp;Text...</source>
        <translation>&amp;Text speichern...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1436"/>
        <source>Save as P&amp;DF...</source>
        <translation>Als &amp;PDF speichern...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1438"/>
        <source>Document &amp;Setup...</source>
        <translation>Dokument &amp;einrichten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1441"/>
        <source>&amp;Print...</source>
        <translation>&amp;Drucken...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1443"/>
        <source>&amp;Quit</source>
        <translation>&amp;Beenden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1445"/>
        <source>&amp;Undo</source>
        <translation>&amp;Rückgängig</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1446"/>
        <source>&amp;Redo</source>
        <translation>Wieder&amp;herstellen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1447"/>
        <source>&amp;Item Action Mode</source>
        <translation>&amp;Objektbezogener Modus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1448"/>
        <source>Cu&amp;t</source>
        <translation>&amp;Ausschneiden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1449"/>
        <location filename="../../scribus/actionmanager.cpp" line="1451"/>
        <source>&amp;Copy</source>
        <translation>&amp;Kopieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1450"/>
        <location filename="../../scribus/actionmanager.cpp" line="1452"/>
        <source>&amp;Paste</source>
        <translation>Einf&amp;ügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1456"/>
        <source>Select &amp;All</source>
        <translation>Alles aus&amp;wählen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1458"/>
        <source>&amp;Deselect All</source>
        <translation>Alles auswählen &amp;rückgängig machen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1459"/>
        <source>&amp;Search/Replace...</source>
        <translation>&amp;Suchen und Ersetzen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1460"/>
        <source>Edit Image...</source>
        <translation>Bild bearbeiten...</translation>
    </message>
    <message>
        <source>C&amp;olors...</source>
        <translation type="obsolete">&amp;Farben...</translation>
    </message>
    <message>
        <source>&amp;Paragraph Styles...</source>
        <translation type="obsolete">&amp;Absatzstile...</translation>
    </message>
    <message>
        <source>&amp;Line Styles...</source>
        <translation type="obsolete">&amp;Linienstile...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1467"/>
        <source>&amp;Master Pages...</source>
        <translation>&amp;Musterseiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1440"/>
        <source>P&amp;references...</source>
        <translation>Allgemeine &amp;Einstellungen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1475"/>
        <source>%1 pt</source>
        <translation>%1 pt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1477"/>
        <source>&amp;Other...</source>
        <translation>&amp;Andere...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1478"/>
        <source>&amp;Left</source>
        <translation>&amp;Links</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1479"/>
        <source>&amp;Center</source>
        <translation>&amp;Zentriert</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1480"/>
        <source>&amp;Right</source>
        <translation>&amp;Rechts</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1481"/>
        <source>&amp;Block</source>
        <translation>&amp;Blocksatz</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1482"/>
        <source>&amp;Forced</source>
        <translation>&amp;Erzwungener Blocksatz</translation>
    </message>
    <message>
        <source>&amp;%1 %</source>
        <translation type="obsolete">&amp;%1 %</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1484"/>
        <source>&amp;Normal</source>
        <translation>&amp;Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1485"/>
        <source>&amp;Underline</source>
        <translation>&amp;Unterstrichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1486"/>
        <source>Underline &amp;Words</source>
        <translation>Wörter unterst&amp;richen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1487"/>
        <source>&amp;Strike Through</source>
        <translation>&amp;Durchgestrichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1488"/>
        <source>&amp;All Caps</source>
        <translation>&amp;Grossbuchstaben</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1489"/>
        <source>Small &amp;Caps</source>
        <translation>&amp;Kapitälchen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1490"/>
        <source>Su&amp;perscript</source>
        <translation>&amp;Hochgestellt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1491"/>
        <source>Su&amp;bscript</source>
        <translation>&amp;Tiefgestellt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1493"/>
        <source>S&amp;hadow</source>
        <translation>&amp;Schatten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1495"/>
        <source>&amp;Image Effects</source>
        <translation>&amp;Bildeffekte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1496"/>
        <source>&amp;Tabulators...</source>
        <translation>&amp;Tabulatoren...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1499"/>
        <source>D&amp;uplicate</source>
        <translation>&amp;Duplizieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1500"/>
        <source>&amp;Multiple Duplicate</source>
        <translation>&amp;Mehrfach duplizieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1502"/>
        <source>&amp;Delete</source>
        <translation>&amp;Löschen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1503"/>
        <source>&amp;Group</source>
        <translation>&amp;Gruppieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1504"/>
        <source>&amp;Ungroup</source>
        <translation>Gruppe auf&amp;lösen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1506"/>
        <source>Is &amp;Locked</source>
        <translation>Ge&amp;sperrt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1507"/>
        <source>Si&amp;ze is Locked</source>
        <translation>Grössen&amp;änderung gesperrt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1511"/>
        <source>Lower to &amp;Bottom</source>
        <translation>In den &amp;Hintergrund</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1512"/>
        <source>Raise to &amp;Top</source>
        <translation>In den &amp;Vordergrund</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1513"/>
        <source>&amp;Lower</source>
        <translation>Weiter nach hin&amp;ten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1514"/>
        <source>&amp;Raise</source>
        <translation>Weiter nach vor&amp;n</translation>
    </message>
    <message>
        <source>Send to S&amp;crapbook</source>
        <translation type="obsolete">In &amp;Bibliothek speichern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1517"/>
        <source>&amp;Attributes...</source>
        <translation>&amp;Attribute...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1519"/>
        <source>I&amp;mage Visible</source>
        <translation>Bild an&amp;zeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1520"/>
        <source>&amp;Update Image</source>
        <translation>Bild &amp;aktualisieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1521"/>
        <source>Insert Rows...</source>
        <translation>Zeilen einfügen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1522"/>
        <source>Insert Columns...</source>
        <translation>Spalten einfügen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1523"/>
        <source>Delete Rows</source>
        <translation>Zeilen entfernen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1524"/>
        <source>Delete Columns</source>
        <translation>Spalten entfernen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1525"/>
        <source>Merge Cells</source>
        <translation>Zellen verbinden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1526"/>
        <source>Split Cells...</source>
        <translation>Zellen teilen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1527"/>
        <source>Set Row Heights...</source>
        <translation>Zeilenhöhe ändern...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1528"/>
        <source>Set Column Widths...</source>
        <translation>Spaltenbreite ändern...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1529"/>
        <source>Distribute Rows Evenly</source>
        <translation>Zeilen gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1530"/>
        <source>Distribute Columns Evenly</source>
        <translation>Spalten gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1531"/>
        <source>Adjust Frame to Table</source>
        <translation>Rahmen an Tabelle anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1532"/>
        <source>Adjust Table to Frame</source>
        <translation>Tabelle an Rahmen anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1533"/>
        <source>Adjust Frame Height to Text</source>
        <translation>Rahmenhöhe an Textmenge anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1534"/>
        <source>Adjust Frame to Image</source>
        <translation>Rahmen an Bild anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1536"/>
        <source>Embed Image</source>
        <translation>Bilddatei im Dokument speichern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1537"/>
        <source>Extended Image Properties</source>
        <translation>Erweiterte Bildeigenschaften</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1538"/>
        <source>&amp;Low Resolution</source>
        <translation>&amp;Niedrige Auflösung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1539"/>
        <source>&amp;Normal Resolution</source>
        <translation>Nor&amp;male Auflösung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1540"/>
        <source>&amp;Full Resolution</source>
        <translation>&amp;Hohe Auflösung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1541"/>
        <source>Is PDF &amp;Bookmark</source>
        <translation>Als PDF-&amp;Lesezeichen verwenden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1542"/>
        <source>Is PDF A&amp;nnotation</source>
        <translation>Als PDF-&amp;Anmerkung verwenden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1543"/>
        <source>Annotation P&amp;roperties</source>
        <translation>Eigenschaften der An&amp;merkung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1544"/>
        <source>Field P&amp;roperties</source>
        <translation>&amp;Eigenschaften des Feldes</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1545"/>
        <source>&amp;Edit Shape...</source>
        <translation>&amp;Form bearbeiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1546"/>
        <source>&amp;Attach Text to Path</source>
        <translation>Text an Pfad aus&amp;richten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1547"/>
        <source>&amp;Detach Text from Path</source>
        <translation>Text von Pfad l&amp;ösen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1548"/>
        <source>&amp;Combine Polygons</source>
        <translation>Polygone &amp;kombinieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1549"/>
        <source>Split &amp;Polygons</source>
        <translation>Polygone &amp;teilen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1550"/>
        <source>&amp;Bezier Curve</source>
        <translation>Bézier&amp;kurve</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1551"/>
        <source>&amp;Image Frame</source>
        <translation>&amp;Bildrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1553"/>
        <source>&amp;Polygon</source>
        <translation>&amp;Polygon</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1554"/>
        <source>&amp;Text Frame</source>
        <translation>&amp;Textrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1555"/>
        <source>&amp;Symbol</source>
        <translation>&amp;Symbol</translation>
    </message>
    <message>
        <source>Unweld items</source>
        <translation type="obsolete">Objekte entkoppeln</translation>
    </message>
    <message>
        <source>Weld items</source>
        <translation type="obsolete">Objekte verkoppeln</translation>
    </message>
    <message>
        <source>Edit weld item</source>
        <translation type="obsolete">Verkoppeltes Objekt bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1561"/>
        <source>&amp;Frames...</source>
        <translation>&amp;Rahmen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1562"/>
        <source>&amp;Glyph...</source>
        <translation>&amp;Zeichen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1563"/>
        <source>Sample Text</source>
        <translation>Beispieltext</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1565"/>
        <source>Anchor Mark</source>
        <translation>Ankerzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1566"/>
        <source>Variable Text</source>
        <translation>Textvariable</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1567"/>
        <source>Reference to Item</source>
        <translation>Objektreferenz</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1568"/>
        <source>Reference to Mark</source>
        <translation>Textmarkenreferenz</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1569"/>
        <source>Foot/Endnote</source>
        <translation>Fuss-/Endnote</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1571"/>
        <source>Edit Mark</source>
        <translation>Textmarke bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1572"/>
        <source>Update Marks</source>
        <translation>Textmarken aktualisieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1575"/>
        <source>&amp;Insert...</source>
        <translation>Ein&amp;fügen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1576"/>
        <source>Im&amp;port...</source>
        <translation>&amp;Importieren...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1577"/>
        <source>&amp;Delete...</source>
        <translation>&amp;Löschen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1578"/>
        <source>&amp;Copy...</source>
        <translation>&amp;Kopieren...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1579"/>
        <source>&amp;Move...</source>
        <translation>Ver&amp;schieben...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1580"/>
        <source>&amp;Apply Master Page...</source>
        <translation>Musterseite an&amp;wenden...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1582"/>
        <source>Manage &amp;Guides...</source>
        <translation>&amp;Hilfslinien bearbeiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1588"/>
        <source>&amp;50%</source>
        <translation>&amp;50%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1589"/>
        <source>&amp;75%</source>
        <translation>&amp;75%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1590"/>
        <source>&amp;100%</source>
        <translation>&amp;100%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1591"/>
        <source>&amp;200%</source>
        <translation>&amp;200%</translation>
    </message>
    <message>
        <source>&amp;Thumbnails</source>
        <translation type="obsolete">&amp;Vorschaubilder</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1594"/>
        <source>Show &amp;Margins</source>
        <translation>S&amp;atzspiegel anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1596"/>
        <source>Show &amp;Frames</source>
        <translation>Ra&amp;hmen anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1598"/>
        <source>Show &amp;Images</source>
        <translation>&amp;Bilder anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1599"/>
        <source>Show &amp;Grid</source>
        <translation>Ra&amp;ster anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1600"/>
        <source>Show G&amp;uides</source>
        <translation>&amp;Hilfslinien anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1602"/>
        <source>Show &amp;Baseline Grid</source>
        <translation>&amp;Grundlinienraster anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1603"/>
        <source>Show &amp;Text Chain</source>
        <translation>Ver&amp;kettete Textrahmen anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1604"/>
        <source>Show Control Characters</source>
        <translation>Kontrollzeichen anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1607"/>
        <source>Sn&amp;ap to Grid</source>
        <translation>Am &amp;Raster ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1608"/>
        <source>Sna&amp;p to Guides</source>
        <translation>An &amp;Hilfslinien ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1614"/>
        <source>&amp;Properties</source>
        <translation>&amp;Eigenschaften</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1616"/>
        <source>&amp;Scrapbook</source>
        <translation>Biblio&amp;thek</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1617"/>
        <source>&amp;Layers</source>
        <translation>E&amp;benen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1619"/>
        <source>&amp;Bookmarks</source>
        <translation>&amp;Lesezeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1620"/>
        <source>&amp;Measurements</source>
        <translation>&amp;Abstandsmesser</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1621"/>
        <source>Action &amp;History</source>
        <translation>Aktions&amp;verlauf</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1622"/>
        <source>Preflight &amp;Verifier</source>
        <translation>&amp;Druckvorstufenüberprüfung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1623"/>
        <source>&amp;Align and Distribute</source>
        <translation>&amp;Ausrichten und Verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1625"/>
        <source>Inline Frames</source>
        <translation>Inline-Objekte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1626"/>
        <source>&amp;Tools</source>
        <translation>&amp;Werkzeuge</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1627"/>
        <source>P&amp;DF Tools</source>
        <translation>&amp;PDF-Werkzeuge</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1630"/>
        <source>Select Item</source>
        <translation>Eintrag auswählen</translation>
    </message>
    <message>
        <source>T&amp;able</source>
        <translation type="obsolete">Ta&amp;belle</translation>
    </message>
    <message>
        <source>&amp;Shape</source>
        <translation type="obsolete">&amp;Form</translation>
    </message>
    <message>
        <source>&amp;Line</source>
        <translation type="obsolete">&amp;Linie</translation>
    </message>
    <message>
        <source>&amp;Freehand Line</source>
        <translation type="obsolete">Frei&amp;handlinie</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1631"/>
        <source>Rotate Item</source>
        <translation>Objekt drehen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1632"/>
        <location filename="../../scribus/actionmanager.cpp" line="1742"/>
        <source>Zoom in or out</source>
        <translation>Vergrössern oder verkleinern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1633"/>
        <source>Zoom in</source>
        <translation>Vergrössern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1634"/>
        <source>Zoom out</source>
        <translation>Verkleinern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1635"/>
        <source>Edit Contents of Frame</source>
        <translation>Rahmeninhalt bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1636"/>
        <source>Edit Text...</source>
        <translation>Text bearbeiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1637"/>
        <source>Link Text Frames</source>
        <translation>Textrahmen verketten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1638"/>
        <source>Unlink Text Frames</source>
        <translation>Verkettete Textrahmen trennen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1641"/>
        <source>&amp;Eye Dropper</source>
        <translation>Farb&amp;wähler</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1642"/>
        <source>Copy Item Properties</source>
        <translation>Eigenschaften übertragen</translation>
    </message>
    <message>
        <source>Edit the text with the Story Editor</source>
        <translation type="obsolete">Text im Story Editor bearbeiten</translation>
    </message>
    <message>
        <source>Insert Text Frame</source>
        <translation type="obsolete">Textrahmen einfügen</translation>
    </message>
    <message>
        <source>Insert Image Frame</source>
        <translation type="obsolete">Bildrahmen einfügen</translation>
    </message>
    <message>
        <source>Insert Table</source>
        <translation type="obsolete">Tabelle einfügen</translation>
    </message>
    <message>
        <source>Insert Shape</source>
        <translation type="obsolete">Form einfügen</translation>
    </message>
    <message>
        <source>Insert Polygon</source>
        <translation type="obsolete">Polygon einfügen</translation>
    </message>
    <message>
        <source>Insert Line</source>
        <translation type="obsolete">Linie einfügen</translation>
    </message>
    <message>
        <source>Insert Bezier Curve</source>
        <translation type="obsolete">Bézierkurve einfügen</translation>
    </message>
    <message>
        <source>Insert Freehand Line</source>
        <translation type="obsolete">Freihandlinie einfügen</translation>
    </message>
    <message>
        <source>&amp;Manage Pictures</source>
        <translation type="obsolete">Bilder &amp;verwalten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1672"/>
        <source>&amp;Hyphenate Text</source>
        <translation>Silben&amp;trennung anwenden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1674"/>
        <source>&amp;Generate Table Of Contents</source>
        <translation>&amp;Inhaltsverzeichnis erstellen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1682"/>
        <source>&amp;About Scribus</source>
        <translation>&amp;Über Scribus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1684"/>
        <source>About &amp;Qt</source>
        <translation>Über &amp;Qt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1685"/>
        <source>Toolti&amp;ps</source>
        <translation>Tool&amp;tipps</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1687"/>
        <source>Scribus &amp;Manual...</source>
        <translation>&amp;Handbuch für Scribus...</translation>
    </message>
    <message>
        <source>Smart &amp;Hyphen</source>
        <translation type="obsolete">Bedingtes &amp;Trennzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1756"/>
        <source>Non Breaking Dash</source>
        <translation>Geschützter Bindestrich</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1757"/>
        <source>Non Breaking &amp;Space</source>
        <translation>Geschütztes &amp;Leerzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1758"/>
        <source>Page &amp;Number</source>
        <translation>Seiten&amp;zahl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1760"/>
        <source>New Line</source>
        <translation>Zeilenumbruch</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1761"/>
        <source>Frame Break</source>
        <translation>Rahmenumbruch</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1762"/>
        <source>Column Break</source>
        <translation>Spaltenumbruch</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1765"/>
        <source>Copyright</source>
        <translation>Copyright</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1766"/>
        <source>Registered Trademark</source>
        <translation>Registriertes Warenzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1767"/>
        <source>Trademark</source>
        <translation>Warenzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1769"/>
        <source>Bullet</source>
        <translation>Aufzählung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1771"/>
        <source>Em Dash</source>
        <translation>Geviertstrich</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1772"/>
        <source>En Dash</source>
        <translation>Halbgeviertstrich</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1773"/>
        <source>Figure Dash</source>
        <translation>Zahlenstrich</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1774"/>
        <source>Quotation Dash</source>
        <translation>Zitatstrich</translation>
    </message>
    <message>
        <source>Apostrophe</source>
        <translation type="obsolete">Apostroph</translation>
    </message>
    <message>
        <source>Straight Double</source>
        <translation type="obsolete">Zollzeichen</translation>
    </message>
    <message>
        <source>Single Left</source>
        <translation type="obsolete">Einfaches Anführungszeichen rechts</translation>
    </message>
    <message>
        <source>Single Right</source>
        <translation type="obsolete">Einfaches Anführungszeichen rechts (Englisch)</translation>
    </message>
    <message>
        <source>Double Left</source>
        <translation type="obsolete">Doppeltes Anführungszeichen rechts</translation>
    </message>
    <message>
        <source>Double Right</source>
        <translation type="obsolete">Doppeltes Anführungszeichen rechts (Englisch)</translation>
    </message>
    <message>
        <source>Single Reversed</source>
        <translation type="obsolete">Anführungszeichen links (Englisch) gespiegelt</translation>
    </message>
    <message>
        <source>Double Reversed</source>
        <translation type="obsolete">Doppeltes Anführungszeichen links (Englisch) gespiegelt</translation>
    </message>
    <message>
        <source>Single Left Guillemet</source>
        <translation type="obsolete">&lt;</translation>
    </message>
    <message>
        <source>Single Right Guillemet</source>
        <translation type="obsolete">&gt;</translation>
    </message>
    <message>
        <source>Double Left Guillemet</source>
        <translation type="obsolete">&lt;&lt;</translation>
    </message>
    <message>
        <source>Double Right Guillemet</source>
        <translation type="obsolete">&gt;&gt;</translation>
    </message>
    <message>
        <source>Low Single Comma</source>
        <translation type="obsolete">Einfaches Anführungszeichen links</translation>
    </message>
    <message>
        <source>Low Double Comma</source>
        <translation type="obsolete">Doppeltes Anführungszeichen links</translation>
    </message>
    <message>
        <source>CJK Single Left</source>
        <translation type="obsolete">Einfaches Anführungszeichen links (CJK)</translation>
    </message>
    <message>
        <source>CJK Single Right</source>
        <translation type="obsolete">Einfaches Anführungszeichen rechts (CJK)</translation>
    </message>
    <message>
        <source>CJK Double Left</source>
        <translation type="obsolete">Doppeltes Anführungszeichen links (CJK)</translation>
    </message>
    <message>
        <source>CJK Double Right</source>
        <translation type="obsolete">Doppeltes Anführungszeichen rechts (CJK)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1695"/>
        <source>Toggle Palettes</source>
        <translation>Paletten ändern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1696"/>
        <source>Toggle Guides</source>
        <translation>Hilfslinien ändern</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1618"/>
        <source>&amp;Arrange Pages</source>
        <translation>&amp;Seiten anordnen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1673"/>
        <source>Dehyphenate Text</source>
        <translation>Silbentrennung rückgängig machen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1583"/>
        <source>Manage Page Properties...</source>
        <translation>Eigenschaften der Seite bearbeiten...</translation>
    </message>
    <message>
        <source>Rulers relative to Page</source>
        <translation type="obsolete">Lineal relativ zur Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1442"/>
        <source>Print Previe&amp;w</source>
        <translation>D&amp;ruckvorschau</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1468"/>
        <source>&amp;JavaScripts...</source>
        <translation>&amp;JavaScripts...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1581"/>
        <source>Convert to Master Page...</source>
        <translation>In Musterseite umwandeln...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1678"/>
        <source>&amp;Cascade</source>
        <translation>&amp;Hintereinander</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1679"/>
        <source>&amp;Tile</source>
        <translation>&amp;Nebeneinander</translation>
    </message>
    <message>
        <source>&amp;About Plug-ins</source>
        <translation type="obsolete">&amp;Über Plug-Ins</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1518"/>
        <source>More Info...</source>
        <translation>Erweitert...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1508"/>
        <source>&amp;Printing Enabled</source>
        <translation>&amp;Drucken aktiviert</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1509"/>
        <source>&amp;Flip Horizontally</source>
        <translation>Horizontal &amp;spiegeln</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1510"/>
        <source>&amp;Flip Vertically</source>
        <translation>Vertikal &amp;spiegeln</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1605"/>
        <source>Show Rulers</source>
        <translation>Lineale anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1615"/>
        <source>&amp;Outline</source>
        <comment>Document Outline Palette</comment>
        <translation>D&amp;okumentstruktur</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1768"/>
        <source>Solidus</source>
        <translation>Schrägstrich</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1770"/>
        <source>Middle Dot</source>
        <translation>Mittepunkt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1795"/>
        <source>En Space</source>
        <translation>En-Abstand</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1796"/>
        <source>Em Space</source>
        <translation>Em-Abstand</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1797"/>
        <source>Thin Space</source>
        <translation>Sehr enge Grundschriftweite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1798"/>
        <source>Thick Space</source>
        <translation>Weite Grundschriftweite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1799"/>
        <source>Mid Space</source>
        <translation>Weite Grundschriftweite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1800"/>
        <source>Hair Space</source>
        <translation>Extrem enge Grundschriftweite</translation>
    </message>
    <message>
        <source>Insert Smart Hyphen</source>
        <translation type="obsolete">Bedingten Trennstrich einfügen</translation>
    </message>
    <message>
        <source>Insert Non Breaking Dash</source>
        <translation type="obsolete">Geschützten Bindestrich einfügen</translation>
    </message>
    <message>
        <source>Insert Non Breaking Space</source>
        <translation type="obsolete">Geschütztes Leerzeichen einfügen</translation>
    </message>
    <message>
        <source>Insert Page Number</source>
        <translation type="obsolete">Seitenzahl einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1802"/>
        <source>ff</source>
        <translation>ff</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1803"/>
        <source>fi</source>
        <translation>fi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1804"/>
        <source>fl</source>
        <translation>fl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1805"/>
        <source>ffi</source>
        <translation>ffi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1806"/>
        <source>ffl</source>
        <translation>ffl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1807"/>
        <source>ft</source>
        <translation>ft</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1808"/>
        <source>st</source>
        <translation>st</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1464"/>
        <source>S&amp;tyles...</source>
        <translation>&amp;Stile...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1453"/>
        <source>Paste (&amp;Absolute)</source>
        <translation>Einfügen (&amp;Absolut)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1455"/>
        <source>C&amp;lear</source>
        <translation>&amp;Entfernen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1492"/>
        <source>&amp;Outline</source>
        <comment>type effect</comment>
        <translation>Um&amp;randung</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1552"/>
        <source>&amp;Outlines</source>
        <comment>Convert to oulines</comment>
        <translation>&amp;Umriss</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1657"/>
        <source>Insert PDF Push Button</source>
        <translation>PDF-Schaltfläche einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1659"/>
        <source>Insert PDF Text Field</source>
        <translation>PDF Textfeld einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1660"/>
        <source>Insert PDF Check Box</source>
        <translation>PDF Checkbox einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1661"/>
        <source>Insert PDF Combo Box</source>
        <translation>PDF Combobox einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1662"/>
        <source>Insert PDF List Box</source>
        <translation>PDF Listbox einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1663"/>
        <source>Insert Text Annotation</source>
        <translation>Anmerkung einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1664"/>
        <source>Insert Link Annotation</source>
        <translation>Link einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1435"/>
        <source>Save as &amp;EPS...</source>
        <translation>Als &amp;EPS speichern...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1601"/>
        <source>Show Text Frame Columns</source>
        <translation>Spaltenmarkierungen anzeigen</translation>
    </message>
    <message>
        <source>&amp;Frame...</source>
        <translation type="obsolete">&amp;Rahmen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1593"/>
        <source>Preview Mode</source>
        <translation>Vorschaumodus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1597"/>
        <source>Show Layer Indicators</source>
        <translation>Ebenenmarkierungen anzeigen</translation>
    </message>
    <message>
        <source>Patterns...</source>
        <translation type="obsolete">Füllmuster...</translation>
    </message>
    <message>
        <source>Send to Patterns</source>
        <translation type="obsolete">Zu Füllmustern hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1586"/>
        <source>&amp;Fit to Height</source>
        <translation>&amp;Seitenhöhe</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1587"/>
        <source>Fit to Width</source>
        <translation>Seitenbreite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1595"/>
        <source>Show Bleeds</source>
        <translation>Anschnitt anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1763"/>
        <source>&amp;Zero Width Space</source>
        <translation>&amp;Null-Leerzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1764"/>
        <source>Zero Width NB Space</source>
        <translation>Geschütztes Null-Leerzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1564"/>
        <source>Sticky Tools</source>
        <translation>Werkzeugmodus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1776"/>
        <source>Apostrophe</source>
        <comment>Unicode 0x0027</comment>
        <translation>Apostroph</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1777"/>
        <source>Straight Double</source>
        <comment>Unicode 0x0022</comment>
        <translation>Zollzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1778"/>
        <source>Single Left</source>
        <comment>Unicode 0x2018</comment>
        <translation>Einfaches Anführungszeichen rechts</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1779"/>
        <source>Single Right</source>
        <comment>Unicode 0x2019</comment>
        <translation>Einfaches Anführungszeichen rechts (Englisch)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1780"/>
        <source>Double Left</source>
        <comment>Unicode 0x201C</comment>
        <translation>Doppeltes Anführungszeichen rechts</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1781"/>
        <source>Double Right</source>
        <comment>Unicode 0x201D</comment>
        <translation>Doppeltes Anführungszeichen rechts (Englisch)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1782"/>
        <source>Single Reversed</source>
        <comment>Unicode 0x201B</comment>
        <translation>Anführungszeichen links (Englisch) gespiegelt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1783"/>
        <source>Double Reversed</source>
        <comment>Unicode 0x201F</comment>
        <translation>Doppeltes Anführungszeichen links (Englisch) gespiegelt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1784"/>
        <source>Single Left Guillemet</source>
        <comment>Unicode 0x2039</comment>
        <translation>&lt;</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1785"/>
        <source>Single Right Guillemet</source>
        <comment>Unicode 0x203A</comment>
        <translation>&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1786"/>
        <source>Double Left Guillemet</source>
        <comment>Unicode 0x00AB</comment>
        <translation>&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1787"/>
        <source>Double Right Guillemet</source>
        <comment>Unicode 0x00BB</comment>
        <translation>&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1788"/>
        <source>Low Single Comma</source>
        <comment>Unicode 0x201A</comment>
        <translation>Einfaches Anführungszeichen links</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1789"/>
        <source>Low Double Comma</source>
        <comment>Unicode 0x201E</comment>
        <translation>Doppeltes Anführungszeichen links</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1790"/>
        <source>CJK Single Left</source>
        <comment>Unicode 0x300C</comment>
        <translation>Einfaches Anführungszeichen links (CJK)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1791"/>
        <source>CJK Single Right</source>
        <comment>Unicode 0x300D</comment>
        <translation>Einfaches Anführungszeichen rechts (CJK)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1792"/>
        <source>CJK Double Left</source>
        <comment>Unicode 0x300E</comment>
        <translation>Doppeltes Anführungszeichen links (CJK)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1793"/>
        <source>CJK Double Right</source>
        <comment>Unicode 0x300F</comment>
        <translation>Doppeltes Anführungszeichen rechts (CJK)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1592"/>
        <source>&amp;400%</source>
        <translation>&amp;400%</translation>
    </message>
    <message>
        <source>Edit Latex Source...</source>
        <translation type="obsolete">LaTeX-Quelltext bearbeiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1644"/>
        <source>Insert &amp;Text Frame</source>
        <translation>&amp;Textrahmen einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1645"/>
        <source>Insert &amp;Image Frame</source>
        <translation>&amp;Bildrahmen einfügen</translation>
    </message>
    <message>
        <source>Insert &amp;Latex Frame</source>
        <translation type="obsolete">&amp;Latex-Rahmen einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1647"/>
        <source>Insert T&amp;able</source>
        <translation>T&amp;abelle einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1648"/>
        <source>Insert &amp;Shape</source>
        <translation>&amp;Form einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1649"/>
        <source>Insert &amp;Polygon</source>
        <translation>&amp;Polygon einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1652"/>
        <source>Insert &amp;Line</source>
        <translation>&amp;Linie einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1654"/>
        <source>Insert &amp;Bezier Curve</source>
        <translation>&amp;Bézierkurve einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1655"/>
        <source>Insert &amp;Freehand Line</source>
        <translation>F&amp;reihandlinie einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1688"/>
        <source>Scribus Homepage</source>
        <translation>Scribus-Homepage</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1689"/>
        <source>Scribus Online Documentation</source>
        <translation>Scribus-Online-Dokumentation</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1690"/>
        <source>Scribus Wiki</source>
        <translation>Scribus-Wiki</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1691"/>
        <source>Getting Started with Scribus</source>
        <translation>Einstieg in Scribus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1610"/>
        <source>Show Context Menu</source>
        <translation>Kontextmenü zeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1683"/>
        <source>&amp;About Plugins</source>
        <translation>&amp;Über Plug-ins</translation>
    </message>
    <message>
        <source>Check updates</source>
        <translation type="obsolete">Aktualisierungen überprüfen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1671"/>
        <source>&amp;Manage Images</source>
        <translation>&amp;Bilder verwalten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1697"/>
        <source>Insert Unicode Character Begin Sequence</source>
        <translation>Fügen Sie den Anfang einer Unicode-Sequenz ein</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1461"/>
        <source>Edit Source...</source>
        <translation>Quelltext bearbeiten...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1606"/>
        <source>Rulers Relative to Page</source>
        <translation>Lineale relativ zur Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1646"/>
        <source>Insert &amp;Render Frame</source>
        <translation>&amp;Renderrahmen einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1692"/>
        <source>Check for Updates</source>
        <translation>Suche nach Aktualisierungen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1759"/>
        <source>Number of Pages</source>
        <translation>Anzahl der Seiten</translation>
    </message>
    <message>
        <source>Select All On Layer</source>
        <translation type="obsolete">Alles auf der Ebene auswählen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1463"/>
        <source>Replace Colors...</source>
        <translation>Farben ersetzen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1457"/>
        <source>Advanced Select All...</source>
        <translation>Erweiterte Objektauswahl ...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1432"/>
        <source>Get Vector File...</source>
        <translation>Vektorgrafik importieren...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1454"/>
        <source>Paste Image from Clipboard</source>
        <translation>Bild aus der Zwischenablage einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1462"/>
        <source>Colors and Fills...</source>
        <translation>Farben und Füllungen...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1465"/>
        <source>Marks...</source>
        <translation>Textmarken...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1466"/>
        <source>Notes Styles...</source>
        <translation>Fuss- und Endnotenstile...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1501"/>
        <source>&amp;Transform</source>
        <translation>&amp;Transformation</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1505"/>
        <source>Adjust Group</source>
        <translation>Gruppe anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1515"/>
        <source>Patterns</source>
        <translation>Füllmuster</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1516"/>
        <source>Inline Items</source>
        <translation>Inline-Objekte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1535"/>
        <source>Adjust Image to Frame</source>
        <translation>Bild an Rahmen anpassen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1556"/>
        <source>Unweld Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1557"/>
        <source>Weld Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1558"/>
        <source>Edit Welded Item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1609"/>
        <source>Snap to Items</source>
        <translation>An Objekten ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1624"/>
        <source>Symbols</source>
        <translation>Symbole</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1639"/>
        <source>Unlink Text Frame with Text Copy</source>
        <translation>Verkettung des Textrahmens von der Kopie lösen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1640"/>
        <source>Unlink Text Frame with Text Cut</source>
        <translation>Verkettung des Textrahmens mit dem entfernten Rahmen lösen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1650"/>
        <source>Insert Arc</source>
        <translation>Kreisbogen einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1651"/>
        <source>Insert Spiral</source>
        <translation>Spirale einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1653"/>
        <source>Insert Calligraphic Line</source>
        <translation>Kalligraphische Linie einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1658"/>
        <source>Insert PDF Radio Button</source>
        <translation>PDF-Radio-Button einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1666"/>
        <source>Insert 3D Annotation</source>
        <translation>3D-Anmerkung einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1675"/>
        <source>&amp;Update Document</source>
        <translation>Dok&amp;ument aktualisieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1676"/>
        <source>Test Qt Quick</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1701"/>
        <source>Copy</source>
        <translation type="unfinished">Kopieren</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1702"/>
        <source>Cut</source>
        <translation type="unfinished">Ausschneiden</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1703"/>
        <source>Paste</source>
        <translation type="unfinished">Einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1704"/>
        <source>Redo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1705"/>
        <source>Undo</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1706"/>
        <source>Close the current document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1707"/>
        <source>Export the document to PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1708"/>
        <source>Create a new document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1709"/>
        <source>Open an existing document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1710"/>
        <source>Print the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1711"/>
        <source>Save the current document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1712"/>
        <source>Copy item properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1713"/>
        <source>Edit contents of a frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1714"/>
        <source>Edit text in the Story Editor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1715"/>
        <source>Eye Dropper</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1716"/>
        <source>Insert an arc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1717"/>
        <source>Insert a bezier curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1718"/>
        <source>Insert a calligraphic line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1719"/>
        <source>Insert a freehand line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1720"/>
        <source>Insert an image frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1721"/>
        <source>Insert a line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1722"/>
        <source>Insert a polygon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1723"/>
        <source>Insert a render frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1724"/>
        <source>Insert a shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1725"/>
        <source>Insert a spiral</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1726"/>
        <source>Insert a table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1727"/>
        <source>Insert a text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1728"/>
        <source>Link text frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1729"/>
        <source>Measurements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1730"/>
        <source>Insert link annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1731"/>
        <source>Insert text annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1732"/>
        <source>Insert PDF check box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1733"/>
        <source>Insert PDF combo box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1734"/>
        <source>Insert PDF list box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1735"/>
        <source>Insert PDF push button</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1736"/>
        <source>Insert PDF radio button</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1737"/>
        <source>Insert PDF text field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1738"/>
        <source>Analyse the document for issues prior to exporting to PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1739"/>
        <source>Rotate an item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1740"/>
        <source>Select an item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1741"/>
        <source>Unlink text frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1744"/>
        <source>Insert 3D annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1755"/>
        <source>Soft &amp;Hyphen</source>
        <translation>Bedingtes &amp;Trennzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1934"/>
        <source>File</source>
        <translation>Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1934"/>
        <source>&amp;File</source>
        <translation>&amp;Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1936"/>
        <source>Edit</source>
        <translation>Bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1936"/>
        <source>&amp;Edit</source>
        <translation>&amp;Bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1938"/>
        <source>Style</source>
        <translation>Stil</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1938"/>
        <source>&amp;Style</source>
        <translation>&amp;Stil</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1940"/>
        <source>Item</source>
        <translation>Objekt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1940"/>
        <source>&amp;Item</source>
        <translation>&amp;Objekt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1942"/>
        <source>Insert</source>
        <translation>Einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1942"/>
        <source>I&amp;nsert</source>
        <translation>&amp;Einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1944"/>
        <source>Page</source>
        <translation>Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1944"/>
        <source>&amp;Page</source>
        <translation>&amp;Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1946"/>
        <source>View</source>
        <translation>Ansicht</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1946"/>
        <source>&amp;View</source>
        <translation>&amp;Ansicht</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1948"/>
        <source>Table</source>
        <translation>Tabelle</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1948"/>
        <source>&amp;Table</source>
        <translation>&amp;Tabelle</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1950"/>
        <source>Extras</source>
        <translation>Extras</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1950"/>
        <source>E&amp;xtras</source>
        <translation>E&amp;xtras</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1952"/>
        <source>Windows</source>
        <translation>Fenster</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1952"/>
        <source>&amp;Windows</source>
        <translation>&amp;Fenster</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1954"/>
        <source>Help</source>
        <translation>Hilfe</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1954"/>
        <source>&amp;Help</source>
        <translation>&amp;Hilfe</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="2307"/>
        <source>Plugin Menu Items</source>
        <translation>Objekte im Plug-in-Menü</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="2309"/>
        <source>Others</source>
        <translation>Andere</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="2311"/>
        <source>Unicode Characters</source>
        <translation>Unicode-Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1686"/>
        <source>Move/Resize Value Indicator</source>
        <translation>Koordinatenanzeige</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1422"/>
        <source>New &amp;from Template...</source>
        <translation>Neu von &amp;Vorlage...</translation>
    </message>
</context>
<context>
    <name>AdjustCmsDialog</name>
    <message>
        <location filename="../../scribus/ui/adjustcmsdialog.cpp" line="16"/>
        <source>CMS Settings</source>
        <translation>CMS-Einstellungen</translation>
    </message>
</context>
<context>
    <name>AlignDistribute</name>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="14"/>
        <source>DockWidget</source>
        <translation>Andocken</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="25"/>
        <source>Align</source>
        <translation>Ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="54"/>
        <source>&amp;Selected Guide:</source>
        <translation>&amp;Ausgewählte Hilfslinie:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="67"/>
        <source>&amp;Relative To:</source>
        <translation>&amp;Relativ zu:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="86"/>
        <source>&amp;Align Sides By:</source>
        <translation>&amp;Seiten ausrichten durch:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="142"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="149"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="156"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="163"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="170"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="177"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="184"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="191"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="198"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="205"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="275"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="282"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="289"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="296"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="303"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="313"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="320"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="330"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="337"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="347"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="354"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="361"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="371"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="378"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="385"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="392"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="566"/>
        <location filename="../../scribus/ui/aligndistribute.ui" line="573"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="249"/>
        <source>Distribute</source>
        <translation>Verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="439"/>
        <source>&amp;Distance:</source>
        <translation>A&amp;bstand:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="503"/>
        <source>Reverse Distribution</source>
        <translation>Umgekehrte Verteilung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.ui" line="545"/>
        <source>Swap</source>
        <translation>Vertauschen</translation>
    </message>
</context>
<context>
    <name>AlignDistributeBase</name>
    <message>
        <source>Align and Distribute</source>
        <translation type="obsolete">Ausrichten und verteilen</translation>
    </message>
    <message>
        <source>Align</source>
        <translation type="obsolete">Ausrichten</translation>
    </message>
    <message>
        <source>&amp;Selected Guide:</source>
        <translation type="obsolete">&amp;Ausgewählte Hilfslinie:</translation>
    </message>
    <message>
        <source>&amp;Relative To:</source>
        <translation type="obsolete">&amp;Relativ zu:</translation>
    </message>
    <message>
        <source>...</source>
        <translation type="obsolete">...</translation>
    </message>
    <message>
        <source>Distribute</source>
        <translation type="obsolete">Verteilen</translation>
    </message>
    <message>
        <source>&amp;Distance:</source>
        <translation type="obsolete">Ab&amp;stand:</translation>
    </message>
</context>
<context>
    <name>AlignDistributePalette</name>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="93"/>
        <source>Align and Distribute</source>
        <translation>Ausrichten und verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="94"/>
        <source>Align</source>
        <translation>Ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="96"/>
        <source>&amp;Relative to:</source>
        <translation>&amp;Relativ zu:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="99"/>
        <source>First Selected</source>
        <translation>Zuerst markiertes</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="100"/>
        <source>Last Selected</source>
        <translation>Zuletzt markiertes</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="101"/>
        <source>Page</source>
        <translation>Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="102"/>
        <source>Margins</source>
        <translation>Ränder</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="103"/>
        <source>Guide</source>
        <translation>Hilfslinien</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="104"/>
        <source>Selection</source>
        <translation>Markierung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="108"/>
        <source>&amp;Align Sides By:</source>
        <translation>&amp;Seiten ausrichten durch:</translation>
    </message>
    <message>
        <source>Moving (Preserve Size)</source>
        <translation type="obsolete">Verschieben (gleiche Grösse)</translation>
    </message>
    <message>
        <source>Resizing (Preserve Opposite Side)</source>
        <translation type="obsolete">Grössenanpassung (gegenüberliegende Seite bleibt unverändert)</translation>
    </message>
    <message>
        <source>&lt;qt&gt;When aligning one side of an item:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height), or &lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Wenn eine Seite eines Objekts ausgerichtet wird entweder:&lt;ul&gt;&lt;li&gt;die andere Seite ebenfalls verschoben (die Abmessungen bleiben erhalten) oder&lt;/li&gt;&lt;li&gt;die andere Seite bleibt, soweit möglich, unverändert (das Objekt wird in der Grösse angepasst)&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="121"/>
        <source>Align bottoms</source>
        <translation>Untere Seiten ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="123"/>
        <source>Align right sides</source>
        <translation>Rechte Seiten ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="127"/>
        <source>Center on vertical axis</source>
        <translation>Auf vertikaler Achse zentrieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="129"/>
        <source>Align left sides</source>
        <translation>Linke Seiten ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="131"/>
        <source>Center on horizontal axis</source>
        <translation>Auf horizontaler Achse zentrieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="135"/>
        <source>Align tops</source>
        <translation>Obere Seiten ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="137"/>
        <source>&amp;Selected Guide:</source>
        <translation>&amp;Ausgewählte Hilfslinie:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="95"/>
        <source>Distribute</source>
        <translation>Verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="111"/>
        <source>Move</source>
        <translation>Verschieben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="112"/>
        <source>Resize</source>
        <translation>Grösse ändern</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="113"/>
        <source>&lt;qt&gt;When aligning one side of an item do one of the following:&lt;ul&gt;&lt;li&gt;Always move the other side too (preserve existing width and height)&lt;/li&gt;&lt;li&gt;Keep the other side fixed (resize the item instead of moving it) whenever possible&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;Wenn eine Seite eines Objekts ausgerichtet wird, wird entweder:&lt;ul&gt;&lt;li&gt;die andere Seite ebenfalls verschoben (die Abmessungen bleiben erhalten) oder&lt;/li&gt;&lt;li&gt;die andere Seite bleibt, soweit möglich, unverändert (das Objekt wird in der Grösse angepasst)&lt;/li&gt;&lt;/ul&gt;&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="145"/>
        <source>Distribute right sides equidistantly</source>
        <translation>Rechte Seiten gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="147"/>
        <source>Distribute bottoms equidistantly</source>
        <translation>Unterseiten gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="149"/>
        <source>Distribute centers equidistantly horizontally</source>
        <translation>Objektmitten gleichmässig horizontal verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="155"/>
        <source>Distribute left sides equidistantly</source>
        <translation>Linke Seiten gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="157"/>
        <source>Distribute centers equidistantly vertically</source>
        <translation>Objektmitten gleichmässig vertikal verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="159"/>
        <source>Distribute tops equidistantly</source>
        <translation>Oberseiten gleichmässig verteilen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="169"/>
        <source>&amp;Distance:</source>
        <translation>Ab&amp;stand:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="170"/>
        <source>Distribute the items with the distance specified</source>
        <translation>Verteilung der Objekte wie angegeben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="172"/>
        <source>When distributing by a set distance, reverse the direction of the distribution of items</source>
        <translation>Beim Verteilen auf Grundlage eines festgelegten Abstandes wird die Verteilungsrichtung umgekehrt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="174"/>
        <source>None Selected</source>
        <translation>Nichts ausgewählt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="176"/>
        <source>Swap items to the left</source>
        <translation>Objekte nach links vertauschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="177"/>
        <source>Swap items to the right</source>
        <translation>Objekte nach rechts vertauschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="477"/>
        <source>Y: %1%2</source>
        <translation>Y: %1%2</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="485"/>
        <source>X: %1%2</source>
        <translation>X: %1%2</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="117"/>
        <source>Align right sides of items to left side of anchor</source>
        <translation>Rechte Seiten von Objekten an der linken Seite des gewählten Ankers ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="119"/>
        <source>Align left sides of items to right side of anchor</source>
        <translation>Linke Seiten von Objekten an der rechten Seite des gewählten Ankers ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="125"/>
        <source>Align tops of items to bottom of anchor</source>
        <translation>Unterseite von Objekten an der Oberseite des gewählten Ankers ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="133"/>
        <source>Align bottoms of items to top of anchor</source>
        <translation>Unterseite von Objekten an der Oberseite des gewählten Ankers ausrichten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="140"/>
        <source>Make horizontal gaps between items equal</source>
        <translation>Gleicher horizontaler Abstand zwischen Objekten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="142"/>
        <source>Make horizontal gaps between items equal to the value specified</source>
        <translation>Horizontaler Abstand zwischen Objekten wie angegeben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="151"/>
        <source>Make vertical gaps between items equal</source>
        <translation>Gleicher vertikaler Abstand zwischen Objekten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="153"/>
        <source>Make vertical gaps between items equal to the value specified</source>
        <translation>Vertikaler Abstand zwischen Objekten wie angegeben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="161"/>
        <source>Make horizontal gaps between items and sides of page equal</source>
        <translation>Gleiche horizontale Abstände zwischen Objekten und Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="163"/>
        <source>Make vertical gaps between items and the top and bottom of page equal</source>
        <translation>Gleiche vertikale Abstände zwischen Objekten und Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="165"/>
        <source>Make horizontal gaps between items and sides of page margins equal</source>
        <translation>Gleiche horizontale Abstände zwischen Objekten und Satzspiegel</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="167"/>
        <source>Make vertical gaps between items and the top and bottom of page margins equal</source>
        <translation>Gleiche vertikale Abstände zwischen Objekten und Satzspiegel</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="106"/>
        <source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;Ausrichten relativ zu:&lt;ul&gt;&lt;li&gt;dem zuerst gewählten Objekt&lt;/li&gt;&lt;li&gt;dem als zweites gewählten Objekt&lt;/li&gt;&lt;li&gt;der aktuellen Seite&lt;/li&gt;&lt;li&gt;den aktuellen Seitenrändern&lt;/li&gt;&lt;li&gt;einer Hilfslinie&lt;/li&gt;&lt;li&gt;der Auswahl&lt;/ul&gt;&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/aligndistribute.cpp" line="115"/>
        <source>The location of the selected guide to align to</source>
        <translation>The location of the selected guide to align to</translation>
    </message>
</context>
<context>
    <name>AlignSelect</name>
    <message>
        <location filename="../../scribus/ui/alignselect.cpp" line="110"/>
        <source>Align Text Left</source>
        <translation>Linksbündig</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/alignselect.cpp" line="111"/>
        <source>Align Text Right</source>
        <translation>Rechtsbündig</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/alignselect.cpp" line="112"/>
        <source>Align Text Center</source>
        <translation>Zentriert</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/alignselect.cpp" line="113"/>
        <source>Align Text Justified</source>
        <translation>Blocksatz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/alignselect.cpp" line="114"/>
        <source>Align Text Forced Justified</source>
        <translation>Erzwungener Blocksatz</translation>
    </message>
</context>
<context>
    <name>Annot</name>
    <message>
        <source>Field Properties</source>
        <translation type="obsolete">Feldeigenschaften</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation type="obsolete">Typ:</translation>
    </message>
    <message>
        <source>Properties</source>
        <translation type="obsolete">Eigenschaften</translation>
    </message>
    <message>
        <source>Name:</source>
        <translation type="obsolete">Name:</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Text</translation>
    </message>
    <message>
        <source>Border</source>
        <translation type="obsolete">Rand</translation>
    </message>
    <message>
        <source>Color:</source>
        <translation type="obsolete">Farbe:</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation type="obsolete">Breite:</translation>
    </message>
    <message>
        <source>Thin</source>
        <translation type="obsolete">Schmal</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <source>Wide</source>
        <translation type="obsolete">Breit</translation>
    </message>
    <message>
        <source>Style:</source>
        <translation type="obsolete">Stil:</translation>
    </message>
    <message>
        <source>Solid</source>
        <translation type="obsolete">Durchgehend</translation>
    </message>
    <message>
        <source>Dashed</source>
        <translation type="obsolete">Gestrichelt</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation type="obsolete">Unterstrichen</translation>
    </message>
    <message>
        <source>Beveled</source>
        <translation type="obsolete">Hervorgehoben</translation>
    </message>
    <message>
        <source>Inset</source>
        <translation type="obsolete">Vertieft</translation>
    </message>
    <message>
        <source>Other</source>
        <translation type="obsolete">Andere</translation>
    </message>
    <message>
        <source>Read Only</source>
        <translation type="obsolete">Nur lesen</translation>
    </message>
    <message>
        <source>Required</source>
        <translation type="obsolete">Erforderlich</translation>
    </message>
    <message>
        <source>Visibility:</source>
        <translation type="obsolete">Darstellung:</translation>
    </message>
    <message>
        <source>Visible</source>
        <translation type="obsolete">Sichtbar</translation>
    </message>
    <message>
        <source>Hidden</source>
        <translation type="obsolete">Versteckt</translation>
    </message>
    <message>
        <source>No Print</source>
        <translation type="obsolete">Nicht drucken</translation>
    </message>
    <message>
        <source>No View</source>
        <translation type="obsolete">Nicht sichtbar</translation>
    </message>
    <message>
        <source>Appearance</source>
        <translation type="obsolete">Aussehen</translation>
    </message>
    <message>
        <source>Text for Button Down</source>
        <translation type="obsolete">Text für Button Down</translation>
    </message>
    <message>
        <source>Text for Roll Over</source>
        <translation type="obsolete">Text für Roll Over</translation>
    </message>
    <message>
        <source>Icons</source>
        <translation type="obsolete">Icons</translation>
    </message>
    <message>
        <source>Use Icons</source>
        <translation type="obsolete">Icons benutzen</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation type="obsolete">Entfernen</translation>
    </message>
    <message>
        <source>Pressed</source>
        <translation type="obsolete">Gedrückt</translation>
    </message>
    <message>
        <source>Roll Over</source>
        <translation type="obsolete">Roll Over</translation>
    </message>
    <message>
        <source>Icon Placement...</source>
        <translation type="obsolete">Anordnung...</translation>
    </message>
    <message>
        <source>Highlight</source>
        <translation type="obsolete">Hervorhebung</translation>
    </message>
    <message>
        <source>Invert</source>
        <translation type="obsolete">Invertieren</translation>
    </message>
    <message>
        <source>Outlined</source>
        <translation type="obsolete">Umrandung</translation>
    </message>
    <message>
        <source>Push</source>
        <translation type="obsolete">Gedrückt</translation>
    </message>
    <message>
        <source>Multi-Line</source>
        <translation type="obsolete">Mehrzeilig</translation>
    </message>
    <message>
        <source>Password</source>
        <translation type="obsolete">Passwort</translation>
    </message>
    <message>
        <source>Limit of</source>
        <translation type="obsolete">Maximum von</translation>
    </message>
    <message>
        <source>Characters</source>
        <translation type="obsolete">Zeichen</translation>
    </message>
    <message>
        <source>Do Not Scroll</source>
        <translation type="obsolete">Nicht scrollen</translation>
    </message>
    <message>
        <source>Do Not Spell Check</source>
        <translation type="obsolete">Nicht in Rechtschreibprüfung einbeziehen</translation>
    </message>
    <message>
        <source>Check Style:</source>
        <translation type="obsolete">Art des Häkchens:</translation>
    </message>
    <message>
        <source>Default is Checked</source>
        <translation type="obsolete">Standardeinstellung ist markiert</translation>
    </message>
    <message>
        <source>Editable</source>
        <translation type="obsolete">Änderbar</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="obsolete">Optionen</translation>
    </message>
    <message>
        <source>Event:</source>
        <translation type="obsolete">Ereignis:</translation>
    </message>
    <message>
        <source>Script:</source>
        <translation type="obsolete">Script:</translation>
    </message>
    <message>
        <source>Edit...</source>
        <translation type="obsolete">Bearbeiten...</translation>
    </message>
    <message>
        <source>Submit to URL:</source>
        <translation type="obsolete">Sende an URL:</translation>
    </message>
    <message>
        <source>Submit Data as HTML</source>
        <translation type="obsolete">Sende Daten als HTML</translation>
    </message>
    <message>
        <source>Import Data from:</source>
        <translation type="obsolete">Importiere Daten von:</translation>
    </message>
    <message>
        <source>Destination</source>
        <translation type="obsolete">Ziel</translation>
    </message>
    <message>
        <source>To File:</source>
        <translation type="obsolete">In Datei:</translation>
    </message>
    <message>
        <source>Change...</source>
        <translation type="obsolete">Ändern...</translation>
    </message>
    <message>
        <source>Page:</source>
        <translation type="obsolete">Seite:</translation>
    </message>
    <message>
        <source>X-Pos:</source>
        <translation type="obsolete">X-Pos:</translation>
    </message>
    <message>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <source>Y-Pos:</source>
        <translation type="obsolete">Y-Pos:</translation>
    </message>
    <message>
        <source>Action</source>
        <translation type="obsolete">Aktion</translation>
    </message>
    <message>
        <source>Field is formatted as:</source>
        <translation type="obsolete">Feld ist formatiert als:</translation>
    </message>
    <message>
        <source>Number Format</source>
        <translation type="obsolete">Zahlenformat</translation>
    </message>
    <message>
        <source>Decimals:</source>
        <translation type="obsolete">Dezimalstellen:</translation>
    </message>
    <message>
        <source>Use Currency Symbol</source>
        <translation type="obsolete">Währungssymbol benutzen</translation>
    </message>
    <message>
        <source>Prepend Currency Symbol</source>
        <translation type="obsolete">Währungssymbol voranstellen</translation>
    </message>
    <message>
        <source>Formatting</source>
        <translation type="obsolete">Formatierung</translation>
    </message>
    <message>
        <source>Percent Format</source>
        <translation type="obsolete">Prozentformat</translation>
    </message>
    <message>
        <source>Date Format</source>
        <translation type="obsolete">Datumsformat</translation>
    </message>
    <message>
        <source>Time Format</source>
        <translation type="obsolete">Zeitformat</translation>
    </message>
    <message>
        <source>Custom Scripts</source>
        <translation type="obsolete">Benutzerdefiniert</translation>
    </message>
    <message>
        <source>Format:</source>
        <translation type="obsolete">Format:</translation>
    </message>
    <message>
        <source>Keystroke:</source>
        <translation type="obsolete">Tastendruck:</translation>
    </message>
    <message>
        <source>Format</source>
        <translation type="obsolete">Format</translation>
    </message>
    <message>
        <source>Value is not validated</source>
        <translation type="obsolete">Wert wird nicht überprüft</translation>
    </message>
    <message>
        <source>Value must be greater than or equal to:</source>
        <translation type="obsolete">Wert muss grösser oder gleich sein als:</translation>
    </message>
    <message>
        <source>and less or equal to:</source>
        <translation type="obsolete">und kleiner oder gleich als:</translation>
    </message>
    <message>
        <source>Custom validate script:</source>
        <translation type="obsolete">Eigenes Überprüfungsscript:</translation>
    </message>
    <message>
        <source>Validate</source>
        <translation type="obsolete">Überprüfen</translation>
    </message>
    <message>
        <source>Value is not calculated</source>
        <translation type="obsolete">Wert wird nicht berechnet</translation>
    </message>
    <message>
        <source>Value is the</source>
        <translation type="obsolete">Wert ist</translation>
    </message>
    <message>
        <source>sum</source>
        <translation type="obsolete">die Summe</translation>
    </message>
    <message>
        <source>product</source>
        <translation type="obsolete">das Produkt</translation>
    </message>
    <message>
        <source>average</source>
        <translation type="obsolete">der Durchschnitt</translation>
    </message>
    <message>
        <source>minimum</source>
        <translation type="obsolete">das Minimum</translation>
    </message>
    <message>
        <source>maximum</source>
        <translation type="obsolete">das Maximum</translation>
    </message>
    <message>
        <source>of the following fields:</source>
        <translation type="obsolete">der folgenden Felder:</translation>
    </message>
    <message>
        <source>Pick...</source>
        <translation type="obsolete">Auswählen...</translation>
    </message>
    <message>
        <source>Custom calculation script:</source>
        <translation type="obsolete">Eigenes Berechnungsscript:</translation>
    </message>
    <message>
        <source>Calculate</source>
        <translation type="obsolete">Berechnen</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Abbrechen</translation>
    </message>
    <message>
        <source>Enter a comma separated list of fields here</source>
        <translation type="obsolete">Hier eine kommaseparierte Liste der Felder eintragen</translation>
    </message>
    <message>
        <source>You need at least the Icon for Normal to use Icons for Buttons</source>
        <translation type="obsolete">Sie benötigen mindestens das Icon für Normal um Icons zu benutzen</translation>
    </message>
    <message>
        <source>Open</source>
        <translation type="obsolete">Öffnen</translation>
    </message>
    <message>
        <source>Example:</source>
        <translation type="obsolete">Beispiel:</translation>
    </message>
    <message>
        <source>Selection Change</source>
        <translation type="obsolete">Auswahl geändert</translation>
    </message>
    <message>
        <source>Button</source>
        <translation type="obsolete">Schaltfläche</translation>
    </message>
    <message>
        <source>Text Field</source>
        <translation type="obsolete">Textfeld</translation>
    </message>
    <message>
        <source>Check Box</source>
        <translation type="obsolete">Kontrollkästchen</translation>
    </message>
    <message>
        <source>Combo Box</source>
        <translation type="obsolete">Kombinationsfeld</translation>
    </message>
    <message>
        <source>List Box</source>
        <translation type="obsolete">Listenfeld</translation>
    </message>
    <message>
        <source>Check</source>
        <translation type="obsolete">Haken</translation>
    </message>
    <message>
        <source>Cross</source>
        <translation type="obsolete">Kreuz</translation>
    </message>
    <message>
        <source>Diamond</source>
        <translation type="obsolete">Raute</translation>
    </message>
    <message>
        <source>Circle</source>
        <translation type="obsolete">Kreis</translation>
    </message>
    <message>
        <source>Star</source>
        <translation type="obsolete">Stern</translation>
    </message>
    <message>
        <source>Square</source>
        <translation type="obsolete">Quadrat</translation>
    </message>
    <message>
        <source>Go To</source>
        <translation type="obsolete">Gehe zu</translation>
    </message>
    <message>
        <source>Submit Form</source>
        <translation type="obsolete">Formular senden</translation>
    </message>
    <message>
        <source>Reset Form</source>
        <translation type="obsolete">Formular zurücksetzen</translation>
    </message>
    <message>
        <source>Import Data</source>
        <translation type="obsolete">Daten importieren</translation>
    </message>
    <message>
        <source>Mouse Up</source>
        <translation type="obsolete">Maustaste loslassen</translation>
    </message>
    <message>
        <source>Mouse Down</source>
        <translation type="obsolete">Maustaste drücken</translation>
    </message>
    <message>
        <source>Mouse Enter</source>
        <translation type="obsolete">Mauszeiger berührt Feld</translation>
    </message>
    <message>
        <source>Mouse Exit</source>
        <translation type="obsolete">Mauszeiger verlässt Feld</translation>
    </message>
    <message>
        <source>On Focus</source>
        <translation type="obsolete">Feld hat Fokus</translation>
    </message>
    <message>
        <source>On Blur</source>
        <translation type="obsolete">Feld verliert Fokus</translation>
    </message>
    <message>
        <source>Plain</source>
        <translation type="obsolete">Nichts</translation>
    </message>
    <message>
        <source>Number</source>
        <translation type="obsolete">Zahl</translation>
    </message>
    <message>
        <source>Percentage</source>
        <translation type="obsolete">Prozent</translation>
    </message>
    <message>
        <source>Date</source>
        <translation type="obsolete">Datum</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Zeit</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation type="obsolete">Benutzerdefiniert</translation>
    </message>
    <message>
        <source>Font for use with PDF 1.3:</source>
        <translation type="obsolete">Schrift für PDF 1.3:</translation>
    </message>
    <message>
        <source>Flag is ignored for PDF 1.3</source>
        <translation type="obsolete">Wird von PDF 1.3 ignoriert</translation>
    </message>
    <message>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation type="obsolete">PDF-Dateien (*.pdf);;Alle Dateien (*.*)</translation>
    </message>
    <message>
        <source>JavaScript</source>
        <translation type="obsolete">JavaScript</translation>
    </message>
    <message>
        <source>None</source>
        <comment>highlight</comment>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>None</source>
        <comment>action</comment>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>Tooltip:</source>
        <translation type="obsolete">Tooltip:</translation>
    </message>
    <message>
        <source>Do Not Export Value</source>
        <translation type="obsolete">Wert nicht exportieren</translation>
    </message>
    <message>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
        <translation type="obsolete">Bilder (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
        <translation type="obsolete">Bilder (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</translation>
    </message>
    <message>
        <source>Export absolute Filename</source>
        <translation type="obsolete">Absoluten Dateinamen exportieren</translation>
    </message>
    <message>
        <source>Submit format:</source>
        <translation type="obsolete">Übermittlungsformat:</translation>
    </message>
    <message>
        <source>FDF</source>
        <translation type="obsolete">FDF</translation>
    </message>
    <message>
        <source>HTML</source>
        <translation type="obsolete">HTML</translation>
    </message>
    <message>
        <source>XFDF</source>
        <translation type="obsolete">XFDF</translation>
    </message>
    <message>
        <source>PDF</source>
        <translation type="obsolete">PDF</translation>
    </message>
</context>
<context>
    <name>Annota</name>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="47"/>
        <source>Annotation Properties</source>
        <translation>Eigenschaften der Anmerkung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="77"/>
        <source>Text</source>
        <translation>Text</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="78"/>
        <source>Link</source>
        <translation>Verknüpfung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="79"/>
        <source>External Link</source>
        <translation>Externe Verknüpfung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="80"/>
        <source>External Web-Link</source>
        <translation>Externe Webverknüpfung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="117"/>
        <source>Options</source>
        <translation>Optionen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="122"/>
        <source>Icon:</source>
        <translation>Symbol:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="124"/>
        <source>Note</source>
        <translation>Anmerkung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="125"/>
        <source>Comment</source>
        <translation>Kommentar</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="126"/>
        <source>Key</source>
        <translation>Schlüssel</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="127"/>
        <source>Help</source>
        <translation>Hilfe</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="128"/>
        <source>NewParagraph</source>
        <translation>Neuer Absatz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="129"/>
        <source>Paragraph</source>
        <translation>Absatz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="130"/>
        <source>Insert</source>
        <translation>Einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="131"/>
        <source>Cross</source>
        <translation>Kreuz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="132"/>
        <source>Circle</source>
        <translation>Kreis</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="137"/>
        <source>Annotation is Open</source>
        <translation>Anmerkung ist geöffnet</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="143"/>
        <source>Destination</source>
        <translation>Ziel</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="196"/>
        <location filename="../../scribus/ui/annota.cpp" line="206"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="440"/>
        <source>Open</source>
        <translation>Öffnen</translation>
    </message>
    <message>
        <source>PDF-Documents (*.pdf);;All Files (*)</source>
        <translation type="obsolete">PDF-Dateien (*.pdf);;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="82"/>
        <source>&amp;Type:</source>
        <translation>&amp;Typ:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="154"/>
        <source>C&amp;hange...</source>
        <translation>Ä&amp;ndern...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="174"/>
        <source>&amp;Page:</source>
        <translation>&amp;Seite:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="199"/>
        <source>&amp;X-Pos</source>
        <translation>&amp;X-Position</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="208"/>
        <source>&amp;Y-Pos:</source>
        <translation>&amp;Y-Position:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="440"/>
        <source>%1;;All Files (*)</source>
        <translation>%1;;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/annota.cpp" line="156"/>
        <source>Export absolute Filename</source>
        <translation>Absoluten Dateinamen exportieren</translation>
    </message>
</context>
<context>
    <name>ApplyMasterPageDialog</name>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="271"/>
        <source>Apply Master Page</source>
        <translation>Musterseite anwenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="272"/>
        <source>&amp;Master Page:</source>
        <translation>&amp;Musterseite:</translation>
    </message>
    <message>
        <source>Apply To</source>
        <translation type="obsolete">Anwenden auf</translation>
    </message>
    <message>
        <source>Current &amp;page</source>
        <translation type="obsolete">Aktuelle &amp;Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="275"/>
        <source>Alt+P</source>
        <translation>Alt+P</translation>
    </message>
    <message>
        <source>&amp;Even pages</source>
        <translation type="obsolete">&amp;Gerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="277"/>
        <source>Alt+E</source>
        <translation>Alt+E</translation>
    </message>
    <message>
        <source>O&amp;dd pages</source>
        <translation type="obsolete">&amp;Ungerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="279"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <source>&amp;All pages</source>
        <translation type="obsolete">Alle &amp;Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="281"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <source>&amp;Within range</source>
        <translation type="obsolete">&amp;Bereich</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="283"/>
        <source>Alt+W</source>
        <translation>Alt+W</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="285"/>
        <source>to</source>
        <translation>bis</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="287"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="289"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="284"/>
        <source>Apply the selected master page to even, odd or all pages within the following range</source>
        <translation>Musterseite auf gerade, ungerade oder alle Seiten im definierten Bereich anwenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="52"/>
        <source>Possible Hyphenation</source>
        <translation>Trennvorschlag</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="273"/>
        <source>Apply to</source>
        <translation>Anwenden auf</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="274"/>
        <source>Current &amp;Page</source>
        <translation>Aktuelle &amp;Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="276"/>
        <source>&amp;Even Pages</source>
        <translation>G&amp;erade Seitenzahlen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="278"/>
        <source>O&amp;dd Pages</source>
        <translation>Ungera&amp;de Seitenzahlen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="280"/>
        <source>&amp;All Pages</source>
        <translation>&amp;Alle Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/applytemplatedialog.cpp" line="282"/>
        <source>&amp;Within Range</source>
        <translation>Bere&amp;ich</translation>
    </message>
</context>
<context>
    <name>ArcVectorBase</name>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="23"/>
        <source>Edit Arc</source>
        <translation>Kreisbogen bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="31"/>
        <source>Start Angle:</source>
        <translation>Ausgangswinkel:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="51"/>
        <source>End Angle:</source>
        <translation>Endwinkel:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="71"/>
        <source>Height:</source>
        <translation>Höhe:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="88"/>
        <source>Width:</source>
        <translation>Breite:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcvectorbase.ui" line="122"/>
        <source>End Edit</source>
        <translation>Bearbeitung beenden</translation>
    </message>
</context>
<context>
    <name>ArcWidgetBase</name>
    <message>
        <location filename="../../scribus/ui/arcwidgetbase.ui" line="26"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcwidgetbase.ui" line="36"/>
        <source>Start Angle:</source>
        <translation>Ausgangswinkel:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcwidgetbase.ui" line="56"/>
        <source>End Angle:</source>
        <translation>Endwinkel:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/arcwidgetbase.ui" line="117"/>
        <source>Sample Polygon</source>
        <translation>Vorschau der gewählten Eigenschaften</translation>
    </message>
</context>
<context>
    <name>ArrowChooser</name>
    <message>
        <source>None</source>
        <translation type="obsolete">Nichts</translation>
    </message>
</context>
<context>
    <name>AspellPlugin</name>
    <message>
        <source>Spell-Checker</source>
        <translation type="obsolete">Rechtschreibprüfung</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="74"/>
        <source>Spell-checking support</source>
        <translation>Unterstützung für Rechtschreibprüfung</translation>
    </message>
    <message>
        <source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
        <translation type="obsolete">Fügt Unterstützung für die Rechtschreibprüfung mit aspell hinzu. Die Sprachen können aus den installierten aspell-Wörterbüchern ausgewählt werden, und die Überprüfiung lässt sich während der Eingabe oder auf ausgewählten Text anwenden.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="80"/>
        <source>0.1</source>
        <translation>0.1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="38"/>
        <source>Spell Checker</source>
        <translation>Rechtschreibprüfung</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="76"/>
        <source>Adds support for spell-checking via Aspell. Languages can be chosen from among the installed Aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="104"/>
        <source>Aspell Plugin Error</source>
        <translation>Aspell-Fehler</translation>
    </message>
</context>
<context>
    <name>AspellPluginBase</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="14"/>
        <source>Spell Check</source>
        <translation>Rechtschreibüberprüfung</translation>
    </message>
    <message>
        <source>Mis-spelling:</source>
        <translation type="obsolete">Rechtschreibfehler:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="119"/>
        <source>Replacement:</source>
        <translation>Ersetzung:</translation>
    </message>
    <message>
        <source>Active dictionary: </source>
        <translation type="obsolete">Aktives Wörterbuch:</translation>
    </message>
    <message>
        <source>Personal
Dictionary</source>
        <translation type="obsolete">Persönliches 
Wörterbuch</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="279"/>
        <source>&amp;Add Word</source>
        <translation>&amp;Wort hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="307"/>
        <source>&amp;Change</source>
        <translation>&amp;Ändern</translation>
    </message>
    <message>
        <source>C&amp;hange All</source>
        <translation type="obsolete">&amp;Alle ändern</translation>
    </message>
    <message>
        <source>&amp;Skip</source>
        <translation type="obsolete">Ü&amp;berspringen</translation>
    </message>
    <message>
        <source>S&amp;kip All</source>
        <translation type="obsolete">A&amp;lle überspringen</translation>
    </message>
    <message>
        <source>&amp;Exit</source>
        <translation type="obsolete">Ver&amp;lassen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="46"/>
        <source>Not in Dictionary:</source>
        <translation>Nicht im Wörterbuch:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="71"/>
        <source>Word that was not found in the active dictionary</source>
        <translation>Ein Wort, das im aktiven Wörterbuch nicht gefunden wurde</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="126"/>
        <source>Replacement text for the current word that was not found in the dictionary</source>
        <translation>Ersetzung für das Wort, das nicht im Wörterbuch gefunden wurde</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="182"/>
        <source>Active Dictionary: </source>
        <translation>Aktives Wörterbuch:</translation>
    </message>
    <message>
        <source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
        <translation type="obsolete">Das gegenwärtig aktive Wörterbuch. Scribus verwendet aspell zur Rechtschreibprüfung&lt;br/&gt;Falls Sie weitere oder neuere Wörterbücher benötigen, sollten Sie diese über Ihr Installationssystem oder den Paketmanager installieren.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="195"/>
        <source>The currently active dictionary. Scribus uses Aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="226"/>
        <source>Ignore the current text not found in the active dictionary</source>
        <translation>Das im Wörterbuch nicht gefundene Wort ignorieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="229"/>
        <source>&amp;Ignore</source>
        <translation>&amp;Ignorieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="248"/>
        <source>Ignore all occurrences of the current text not found in the active dictionary</source>
        <translation>Alle Instanzen des im Wörterbuch nicht gefundenen Wortes ignorieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="251"/>
        <source>I&amp;gnore All</source>
        <translation>Alle i&amp;gnorieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="276"/>
        <source>Add the current word to the your personal spelling dictionary for future use</source>
        <translation>Das angezeigte Wort für die spätere Benutzung zum eigenen Wörterbuch hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="304"/>
        <source>Change the current word that was not found to that shown in the replacement entry field</source>
        <translation>Das angezeigte und nicht gefundene Wort durch das im Ersetzungsfeld angebotene ersetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="332"/>
        <source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
        <translation>Alle Instanzen des angezeigten und nicht gefundenen Wortes durch das im Ersetzungsfeld angebotene ersetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="335"/>
        <source>Change A&amp;ll</source>
        <translation>A&amp;lle ersetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="373"/>
        <source>Close</source>
        <translation>Schliessen</translation>
    </message>
</context>
<context>
    <name>AspellPluginImpl</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
        <source>Loaded </source>
        <translation>Geladen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
        <source>default </source>
        <translation>Grundeinstellung</translation>
    </message>
    <message>
        <source> aspell dictionary.</source>
        <translation type="obsolete">Aspell-Wörterbuch.</translation>
    </message>
    <message>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
        <translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Fehler in der Konfiguration der Rechtschreibprüfung.</translation>
    </message>
    <message>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
        <translation type="obsolete">aspellplugin (AspellPluginImpl::AspellPluginImpl): Fehler beim Erstellen der aspell-Rechtschreibprüfung.</translation>
    </message>
    <message>
        <source>Spell-Checker</source>
        <translation type="obsolete">Rechtschreibprüfung</translation>
    </message>
    <message>
        <source>Spell-checking completed.</source>
        <translation type="obsolete">Rechtschreibprüfung abgeschlossen.</translation>
    </message>
    <message>
        <source>Spell-checking done.</source>
        <translation type="obsolete">Rechtschreibprüfung beendet.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="391"/>
        <source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
        <translation>AspellPluginImpl::on_fskipAllBtn_clicked(): Konnte nicht alle Fälle von &quot; überspringen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="393"/>
        <source> by adding it to the session list.</source>
        <translation>Indem es zur aktuellen Liste hinzugefügt wird.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="414"/>
        <source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
        <translation>AspellPluginImpl::on_faddWordBtn_clicked(): Konnte Wort nicht der perönlichen Liste hinzufügen.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="267"/>
        <source>Spelling check complete</source>
        <translation>Rechtschreibprüfung abgeschlossen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="48"/>
        <source> Aspell dictionary.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="268"/>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="460"/>
        <source>Spell Checker</source>
        <translation>Rechtschreibprüfung</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="81"/>
        <source>No available Aspell dictionaries found. Install some, please.</source>
        <translation>Keine Aspell-Wörterbücher gefunden. Installieren Sie bitte einige.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="106"/>
        <source>Spell Checker Plugin Failed to Initialise.
Configuration invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="113"/>
        <source>Spell Checker Plugin Failed to Initialise.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="115"/>
        <source>No Aspell dictionaries could be found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="461"/>
        <source>Do you want start from the beginning of the selection with new language selected?</source>
        <translation>Möchten Sie die Auswahl erneut von Anfang an in der neuen Sprache überprüfen?</translation>
    </message>
</context>
<context>
    <name>AutoformButtonGroup</name>
    <message>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="36"/>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="1281"/>
        <source>Arrows</source>
        <translation>Pfeilsymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="44"/>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="1282"/>
        <source>Flow Chart</source>
        <translation>Flussdiagramm</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="53"/>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="1283"/>
        <source>Jigsaw</source>
        <translation>Puzzleteile</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="66"/>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="1284"/>
        <source>Specials</source>
        <translation>Spezielle Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="21"/>
        <location filename="../../scribus/ui/autoformbuttongroup.cpp" line="1280"/>
        <source>Default Shapes</source>
        <translation>Standardformen</translation>
    </message>
</context>
<context>
    <name>Barcode</name>
    <message>
        <source>&amp;Barcode Generator...</source>
        <translation type="obsolete">&amp;Strichcodegenerator...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="23"/>
        <source>Insert Barcode</source>
        <translation type="unfinished">Strichcode einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="44"/>
        <source>Scribus frontend for Pure PostScript Barcode Writer</source>
        <translation>Scribus-Dialog für den Pure-PostScript-Barcode-Writer</translation>
    </message>
    <message>
        <source>&amp;Barcode...</source>
        <translation type="obsolete">&amp;Strichcode...</translation>
    </message>
</context>
<context>
    <name>BarcodeGenerator</name>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="393"/>
        <source>Error opening file: %1</source>
        <translation>Fehler beim Öffnen der Datei: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
        <source>12 or 13 digits</source>
        <translation>12 oder 13 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
        <source>8 digits</source>
        <translation>8 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
        <source>11 or 12 digits</source>
        <translation>11 oder 12 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
        <source>7 or 8 digits</source>
        <translation>7 oder 8 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
        <source>5 digits</source>
        <translation>5 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
        <source>2 digits</source>
        <translation>2 Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
        <source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
        <translation>Kombination aus Buchstaben, ZIffern und den Symbolen -.*$/+%.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="74"/>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="82"/>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="85"/>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
        <source>Variable number of digits</source>
        <translation>Kombinationen aus Ziffern</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
        <source>Variable number of digits and capital letters</source>
        <translation>Kombinationen aus Ziffern und Grossbuchstaben</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
        <source>Variable number of hexadecimal characters</source>
        <translation>Kombinationen aus Hexadezimalzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="102"/>
        <source>Variable number of characters, digits and any symbols.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="111"/>
        <source>Barcode</source>
        <translation>Strichcode</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="427"/>
        <source>Barcode incomplete</source>
        <translation>Strichcode ist unvollständig</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="63"/>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
        <source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
        <translation>Kombination aus ASCII-Zeichen und Sonderzeichen, beginnend mit dem passenden Startzeichen für den Zeichensatz. Bei USS/EAN-128 muss am Anfang ein FNC1-Symbol direkt nach dem Startzeichen stehen.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
        <source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
        <translation>Kombination aus Ziffern und den Symbolem -$:/.+ABCD.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
        <source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
        <translation>Kombination aus Ziffern. Ein ITF-14-Code besteht aus 14 Zeichen und besitzt keine Prüfnummer</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
        <source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
        <translation>12 oder 13 Ziffern mit Strichen. Das alte ISBN-10-Format erlaubt 9 oder 10 Ziffern mit Strichen, aber dieser Standard wurde zum 1. Januar 2007 für ungültig erklärt.
(Um einen alten ISBN-10-Code in den neuen ISBN-13-Code umzuwandeln, setzen Sie die Ziffern 978 voran, z. B. 1-56592-479-7 -&gt; 978-1-56592-479. Die Prüfnummer wird automatisch berechnet.)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="200"/>
        <source>Select Type</source>
        <translation>Typ auswählen</translation>
    </message>
    <message>
        <source>Select Barcode Type</source>
        <translation type="obsolete">Typ des Strichodes auswählen</translation>
    </message>
</context>
<context>
    <name>BarcodeGeneratorBase</name>
    <message>
        <source>Barcode Creator</source>
        <translation type="obsolete">Strichcodegenerator</translation>
    </message>
    <message>
        <source>Barcode</source>
        <translation type="obsolete">Strichcode</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="128"/>
        <source>&amp;Type:</source>
        <translation>&amp;Typ:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="141"/>
        <source>Select one of the available barcode type here</source>
        <translation>Wählen Sie bitte einen der verfügbaren Typen aus</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="108"/>
        <source>The numeric representation of the code itself. See the help message below</source>
        <translation>Die Zahlen, die in dem Strichcode vorkommen. Siehe die Hilfe unten</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="98"/>
        <source>Reset the barcode samples</source>
        <translation>Einstellungen zurücksetzen</translation>
    </message>
    <message>
        <source>&amp;Include text in barcode</source>
        <translation type="obsolete">T&amp;ext in Strichcode einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="76"/>
        <source>Alt+I</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="70"/>
        <source>If checked, there will be numbers in the barcode too</source>
        <translation>Zahlen im Strichcode darstellen, wenn aktiviert</translation>
    </message>
    <message>
        <source>&amp;Guard whitespace</source>
        <translation type="obsolete">&amp;Sicherheitsleerzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="63"/>
        <source>Alt+G</source>
        <translation>Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="57"/>
        <source>Draw arrows to be sure of space next the code</source>
        <translation>Pfeile als Sicherheitsabstand um den Strichcode zeichnen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="151"/>
        <source>Colors</source>
        <translation>Farben</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="173"/>
        <source>&amp;Background</source>
        <translation>&amp;Hintergrund</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="176"/>
        <source>Alt+B</source>
        <translation>Alt+H</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="170"/>
        <source>Background color - under the code lines</source>
        <translation>Farbe hinter dem Strichcode</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
        <source>&amp;Lines</source>
        <translation>&amp;Linien</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="202"/>
        <source>Color of the lines in barcode</source>
        <translation>Farbe der Strichcodelinien</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
        <source>&amp;Text</source>
        <translation>Te&amp;xt</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="240"/>
        <source>Alt+T</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="234"/>
        <source>Color of the text and numbers</source>
        <translation>Farbe des Textes und der Zahlen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="269"/>
        <source>Hints and help is shown here</source>
        <translation>Hier sehen Sie Tipps und Tricks</translation>
    </message>
    <message>
        <source>Preview of the result. 72dpi sample.</source>
        <translation type="obsolete">Vorschau des Ergebnisses in 72dpi.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="115"/>
        <source>Co&amp;de:</source>
        <translation>&amp;Code:</translation>
    </message>
    <message>
        <source>I&amp;nclude checksum</source>
        <translation type="obsolete">Prüfsumme &amp;integrieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="50"/>
        <source>Alt+N</source>
        <translation>Alt+I</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="44"/>
        <source>Generate and include a checksum in barcode</source>
        <translation>Prüfsumme erzeugen und mit in den Strichcode einfügen</translation>
    </message>
    <message>
        <source>Incl&amp;ude checksum digit</source>
        <translation type="obsolete">Prüfsummen&amp;zeichen integrieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="37"/>
        <source>Alt+U</source>
        <translation>Alt+Z</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="31"/>
        <source>Include the checksum digit in the barcode text</source>
        <translation>Prüfsummenziffer in den Barcode integrieren</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="16"/>
        <source>Insert Barcode</source>
        <translation>Strichcode einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="25"/>
        <source>Format</source>
        <translation>Format</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="34"/>
        <source>Incl&amp;ude Checksum Digit</source>
        <translation>Prüfs&amp;ummenzahl einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="47"/>
        <source>I&amp;nclude Checksum</source>
        <translation>Prüfsumme ei&amp;nfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="60"/>
        <source>&amp;Guard Whitespace</source>
        <translation>Si&amp;cherheitsabstand</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="73"/>
        <source>&amp;Include Text in Barcode</source>
        <translation>Text &amp;in Strichcode einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="323"/>
        <source>Options</source>
        <translation type="unfinished">Optionen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="329"/>
        <source>&amp;Format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="349"/>
        <source>Error &amp;checking:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="362"/>
        <source>Minimum error checking; raised opportunistically if size of symbol is not increased</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Biblio</name>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1974"/>
        <source>Scrapbook</source>
        <translation>Bibliothek</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1162"/>
        <source>Delete</source>
        <translation>Löschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1723"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1731"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1816"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1895"/>
        <source>Object</source>
        <translation>Objekt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1227"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1607"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1735"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1898"/>
        <source>New Entry</source>
        <translation>Neuer Eintrag</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="734"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1980"/>
        <source>Hide Directories</source>
        <translation>Verzeichnisse ausblenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="744"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1983"/>
        <source>Open Directories in a new tab</source>
        <translation>Verzeichnisse in neuem Reiter öffnen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1160"/>
        <source>Rename</source>
        <translation>Umbenennen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1227"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1416"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1607"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1735"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1898"/>
        <source>&amp;Name:</source>
        <translation>&amp;Name:</translation>
    </message>
    <message>
        <source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
        <translation type="obsolete">Die Bezeichnung &quot;%1&quot; ist nicht eindeutig.
Bitte wählen Sie eine andere.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="921"/>
        <source>Choose a Scrapbook Directory</source>
        <translation>Wählen Sie ein Verzeichnis für die Bibliothek</translation>
    </message>
    <message>
        <source>Choose a Directory</source>
        <translation type="obsolete">Wählen Sie ein Verzeichnis</translation>
    </message>
    <message>
        <source>Scrapbook (*.scs)</source>
        <translation type="obsolete">Bibliothek (*.scs)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="967"/>
        <source>Choose a scrapbook file to import</source>
        <translation>Wählen Sie eine Bibliothek aus, die Sie importieren möchten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1975"/>
        <source>Create a new scrapbook page</source>
        <translation>Neue Seite in der Bibliothek erstellen</translation>
    </message>
    <message>
        <source>Load an existing scrapbook</source>
        <translation type="obsolete">Vorhandene Bibliothek laden</translation>
    </message>
    <message>
        <source>Save the selected scrapbook</source>
        <translation type="obsolete">Markierte Bibliothek speichern</translation>
    </message>
    <message>
        <source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
        <translation type="obsolete">Bibliothek aus Scribus &lt;=1.3.2 importieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1978"/>
        <source>Close the selected scrapbook</source>
        <translation>Markierte Bibliothek schliessen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1167"/>
        <source>Copy To:</source>
        <translation>Kopieren nach:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1168"/>
        <source>Move To:</source>
        <translation>Verschieben nach:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="760"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="761"/>
        <source>Main</source>
        <translation>Hauptfenster</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="763"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="764"/>
        <source>Copied Items</source>
        <translation>Kopierte Objekte</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1416"/>
        <source>New Name</source>
        <translation>Neuer Name</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="969"/>
        <source>Scrapbook (*.scs *.SCS)</source>
        <translation>Bibliothek (*.scs *.SCS)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="737"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1981"/>
        <source>Hide Images</source>
        <translation>Pixelgrafiken ausblenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="740"/>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1982"/>
        <source>Hide Vector files</source>
        <translation>Vektorgrafiken ausblenden</translation>
    </message>
    <message>
        <source>Save as...</source>
        <translation type="obsolete">Speichern unter ...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1206"/>
        <source>Close</source>
        <translation>Schliessen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1209"/>
        <source>Delete Contents</source>
        <translation>Inhalte löschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1371"/>
        <source>Do you really want to delete all entries?</source>
        <translation>Möchten Sie wirklich all diese Einträge löschen?</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1976"/>
        <source>Go up one Directory</source>
        <translation>Ein Verzeichnis nach oben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1977"/>
        <source>Import a scrapbook file from Scribus &lt;=1.3.2</source>
        <translation>Import einer Bibliotheksdatei aus Scribus 1.3.2 oder einer früheren Version</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1979"/>
        <source>Configure the scrapbook</source>
        <translation>Bibliothek konfigurieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/scrapbookpalette.cpp" line="1156"/>
        <source>Paste to Page</source>
        <translation>Auf Seite einfügen</translation>
    </message>
</context>
<context>
    <name>BookMView</name>
    <message>
        <source>Bookmarks</source>
        <translation type="obsolete">Lesezeichen</translation>
    </message>
    <message>
        <source>Move Bookmark</source>
        <translation type="obsolete">Lesezeichen verschieben</translation>
    </message>
    <message>
        <source>Insert Bookmark</source>
        <translation type="obsolete">Lesezeichen einfügen</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Abbrechen</translation>
    </message>
</context>
<context>
    <name>BookPalette</name>
    <message>
        <location filename="../../scribus/ui/bookmarkpalette.cpp" line="48"/>
        <source>Bookmarks</source>
        <translation>Lesezeichen</translation>
    </message>
</context>
<context>
    <name>ButtonIcon</name>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="29"/>
        <source>Icon Placement</source>
        <translation>Anordnung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="38"/>
        <source>Layout:</source>
        <translation>Anordnung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="50"/>
        <source>Scale:</source>
        <translation>Skaliere:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="55"/>
        <source>Always</source>
        <translation>Immer</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="55"/>
        <source>When Icon is too small</source>
        <translation>bei zu kleinem Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="56"/>
        <source>When Icon is too big</source>
        <translation>bei zu grossem Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="56"/>
        <source>Never</source>
        <translation>Nie</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="63"/>
        <source>Scale How:</source>
        <translation>Skalierungsart:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="66"/>
        <source>Proportional</source>
        <translation>Proportional</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="67"/>
        <source>Non Proportional</source>
        <translation>Unproportional</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="90"/>
        <source>Icon</source>
        <translation>Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="117"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="121"/>
        <source>Cancel</source>
        <translation>Abbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="124"/>
        <source>Reset</source>
        <translation>Zurücksetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption only</source>
        <translation>Nur Text</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Icon only</source>
        <translation>Nur Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption below Icon</source>
        <translation>Text unter dem Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="41"/>
        <source>Caption above Icon</source>
        <translation>Text über dem Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption right to Icon</source>
        <translation>Text rechts vom Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption left to Icon</source>
        <translation>Text links vom Icon</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/buttonicon.cpp" line="42"/>
        <source>Caption overlays Icon</source>
        <translation>Text überlagert Icon</translation>
    </message>
</context>
<context>
    <name>CMSPrefs</name>
    <message>
        <source>System Profiles</source>
        <translation type="obsolete">Systemprofile</translation>
    </message>
    <message>
        <source>Rendering Intents</source>
        <translation type="obsolete">Render-Prioritäten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefs.cpp" line="26"/>
        <source>Monitor profiles can only be changed when no documents are currently opened.</source>
        <translation>Monitorprofile können nur geändert werden, wenn kein Dokument geöffnet ist.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefs.cpp" line="78"/>
        <source>Perceptual</source>
        <translation>Wahrnehmung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefs.cpp" line="78"/>
        <source>Relative Colorimetric</source>
        <translation>Relativ farbmetrisch</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefs.cpp" line="79"/>
        <source>Saturation</source>
        <translation>Farbsättigung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefs.cpp" line="79"/>
        <source>Absolute Colorimetric</source>
        <translation>Absolut farbmetrisch</translation>
    </message>
    <message>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Das Farbprofil für Ihren Monitor, das Sie entweder selbst erstellt oder vom 
Hersteller erhalten haben. Dieses Farbprofil sollte die Eigenschaften Ihres 
Monitors berücksichtigen und kein generisches Profil (z. B. sRGB) sein.</translation>
    </message>
    <message>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Das Farbprofil für Ihren Drucker, das Sie vom Hersteller erhalten haben. 
Dieses Farbprofil sollte die Eigenschaften Ihres Druckers berücksichtigen 
und kein generisches Profil (z. B. sRGB) sein.</translation>
    </message>
    <message>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation type="obsolete">Tiefenkompensierung ist eine Methode zur Verbesserung des Kontrasts.
Diese Option sollte aktiviert sein, wenn Sie Fotos im Dokument haben.</translation>
    </message>
    <message>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation type="obsolete">Aktiviert die Druckvorschau unter Verwendung des
gewählten Druckerprofils.</translation>
    </message>
    <message>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation type="obsolete">Aktiviert die Gamut-Warnung, d. h. die Anzeige von Farben, welche 
auf Grund der Eigenschaften des gewählten Ausgabegerätes für den 
Druck nicht korrekt wiedergegeben werden können. Bitte beachten Sie, 
dass dies sehr genaue Geräteprofile erfordert.</translation>
    </message>
    <message>
        <source>&amp;Activate Color Management</source>
        <translation type="obsolete">Farbmanagement &amp;aktivieren</translation>
    </message>
    <message>
        <source>&amp;Monitor:</source>
        <translation type="obsolete">Moni&amp;tor:</translation>
    </message>
    <message>
        <source>P&amp;rinter:</source>
        <translation type="obsolete">&amp;Drucker:</translation>
    </message>
    <message>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="obsolete">Druckerfarben auf dem Bildschirm &amp;simulieren</translation>
    </message>
    <message>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation type="obsolete">Farben ausserhalb des Farbbereichs &amp;markieren</translation>
    </message>
    <message>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation type="obsolete">&amp;Tiefenkompensierung benutzen</translation>
    </message>
    <message>
        <source>&amp;RGB Pictures:</source>
        <translation type="obsolete">&amp;RGB-Bilder:</translation>
    </message>
    <message>
        <source>&amp;CMYK Pictures:</source>
        <translation type="obsolete">&amp;CMYK-Bilder:</translation>
    </message>
    <message>
        <source>Default color profile for imported CMYK images</source>
        <translation type="obsolete">Standard-Farbprofil für importierte CMYK-Bilder</translation>
    </message>
    <message>
        <source>Default color profile for imported RGB images</source>
        <translation type="obsolete">Standard-Farbprofil für importierte RGB-Bilder</translation>
    </message>
    <message>
        <source>&amp;RGB Solid Colors:</source>
        <translation type="obsolete">&amp;RGB-Füllfarben:</translation>
    </message>
    <message>
        <source>&amp;CMYK Solid Colors:</source>
        <translation type="obsolete">&amp;CMYK-Füllfarben:</translation>
    </message>
    <message>
        <source>Pictures:</source>
        <translation type="obsolete">Bilder:</translation>
    </message>
    <message>
        <source>Sol&amp;id Colors:</source>
        <translation type="obsolete">Füll&amp;farben:</translation>
    </message>
    <message>
        <source>Convert all colors to printer space</source>
        <translation type="obsolete">Alle Farben in den Farbraum des Druckers konvertieren</translation>
    </message>
    <message>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation type="obsolete">Standardprofil für RGB-Füllfarben im Dokument</translation>
    </message>
    <message>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation type="obsolete">Standardprofil für CMYK-Füllfarben im Dokument</translation>
    </message>
    <message>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Standard-Rendering für Füllfarben. Verändern Sie die Einstellung nur, wenn Sie wissen, was Sie tun.
Hier sollte entweder Relativ farbmetrisch oder Wahrnehmung ausgewählt werden.</translation>
    </message>
    <message>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Standard-Rendering für Bilder. Verändern Sie die Einstellung nur, wenn Sie wissen, was Sie tun.
Hier sollte entweder Relativ farbmetrisch oder Wahrnehmung ausgewählt werden.</translation>
    </message>
    <message>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation type="obsolete">Komplette Farbmanagement-Umgebung simulieren:
alle Farben (egal ob RGB oder CMYK) werden in den Farbraum des Druckers konvertiert.</translation>
    </message>
    <message>
        <source>&amp;RGB Images:</source>
        <translation type="obsolete">&amp;RGB-Bilder:</translation>
    </message>
    <message>
        <source>&amp;CMYK Images:</source>
        <translation type="obsolete">&amp;CMYK-Bilder:</translation>
    </message>
    <message>
        <source>Images:</source>
        <translation type="obsolete">Bilder:</translation>
    </message>
</context>
<context>
    <name>CMSPrefsBase</name>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="20"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="32"/>
        <source>&amp;Activate Color Management</source>
        <translation>Farbmanagement &amp;aktivieren</translation>
    </message>
    <message>
        <source>System Profiles</source>
        <translation type="obsolete">Systemprofile</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="54"/>
        <source>&amp;RGB Images:</source>
        <translation>&amp;RGB-Bilder:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="70"/>
        <source>Default color profile for imported RGB images</source>
        <translation>Standard-Farbprofil für importierte RGB-Bilder</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="77"/>
        <source>&amp;CMYK Images:</source>
        <translation>&amp;CMYK-Bilder:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="93"/>
        <source>Default color profile for imported CMYK images</source>
        <translation>Standard-Farbprofil für importierte CMYK-Bilder</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="100"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation>&amp;RGB-Füllfarben:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="116"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation>Standardprofil für RGB-Füllfarben im Dokument</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="123"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation>&amp;CMYK-Füllfarben:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="139"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation>Standardprofil für CMYK-Füllfarben im Dokument</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="176"/>
        <source>Document Rendering Intents</source>
        <translation>Dokumentbezogene Render-Prioritäten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="245"/>
        <source>Document Options</source>
        <translation>Dokumentoptionen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="278"/>
        <source>Simulate printer on Screen</source>
        <translation>Druckerfarben auf dem Bildschirm simulieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="313"/>
        <source>Monitor Profile</source>
        <translation>Bildschirmprofil</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="325"/>
        <source>&amp;Monitor:</source>
        <translation>Moni&amp;tor:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="341"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation>Das Farbprofil für Ihren Monitor, das Sie entweder selbst erstellt oder vom 
Hersteller erhalten haben. Dieses Farbprofil sollte die Eigenschaften Ihres 
Monitors berücksichtigen und kein generisches Profil (z. B. sRGB) sein.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="146"/>
        <source>P&amp;rinter:</source>
        <translation>&amp;Drucker:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="42"/>
        <source>Document Profiles</source>
        <translation>Dokumentprofile</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="162"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation>Das Farbprofil für Ihren Drucker, das Sie vom Hersteller erhalten haben. 
Dieses Farbprofil sollte die Eigenschaften Ihres Druckers berücksichtigen 
und kein generisches Profil (z. B. sRGB) sein.</translation>
    </message>
    <message>
        <source>Rendering Intents</source>
        <translation type="obsolete">Render-Prioritäten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="188"/>
        <source>Images:</source>
        <translation>Bilder:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="204"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation>Standard-Rendering für Bilder. Verändern Sie die Einstellung nur, wenn Sie wissen, was Sie tun.
Hier sollte entweder Relativ farbmetrisch oder Wahrnehmung ausgewählt werden.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="212"/>
        <source>Sol&amp;id Colors:</source>
        <translation>Füll&amp;farben:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="228"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation>Standard-Rendering für Füllfarben. Verändern Sie die Einstellung nur, wenn Sie wissen, was Sie tun.
Hier sollte entweder Relativ farbmetrisch oder Wahrnehmung ausgewählt werden.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="274"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation>Aktiviert die Druckvorschau unter Verwendung des
gewählten Druckerprofils.</translation>
    </message>
    <message>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="obsolete">Druckerfarben auf dem Bildschirm &amp;simulieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="285"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation>Komplette Farbmanagement-Umgebung simulieren:
alle Farben (egal ob RGB oder CMYK) werden in den Farbraum des Druckers konvertiert.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="289"/>
        <source>Convert all colors to printer space</source>
        <translation>Alle Farben in den Farbraum des Druckers konvertieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="296"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation>Aktiviert die Gamut-Warnung, d. h. die Anzeige von Farben, welche 
auf Grund der Eigenschaften des gewählten Ausgabegerätes für den 
Druck nicht korrekt wiedergegeben werden können. Bitte beachten Sie, 
dass dies sehr genaue Geräteprofile erfordert.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="300"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation>Farben ausserhalb des Farbbereichs &amp;markieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="263"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation>Tiefenkompensierung ist eine Methode zur Verbesserung des Kontrasts.
Diese Option sollte aktiviert sein, wenn Sie Fotos im Dokument haben.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmsprefsbase.ui" line="267"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation>&amp;Tiefenkompensierung benutzen</translation>
    </message>
</context>
<context>
    <name>CMYKChoose</name>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="90"/>
        <source>Edit Color</source>
        <translation>Farbe bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="114"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="632"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="842"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="849"/>
        <source>CMYK</source>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="115"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="384"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="854"/>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="116"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="707"/>
        <source>Web Safe RGB</source>
        <translation>Webfarben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="133"/>
        <source>New</source>
        <translation>Neu</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="150"/>
        <source>Old</source>
        <translation>Alt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="191"/>
        <source>Scribus Swatches</source>
        <translation>Scribus-Paletten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="195"/>
        <source>User Swatches</source>
        <translation>Benutzerdefinierte Paletten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="235"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="657"/>
        <source>C:</source>
        <translation>C:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="262"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="658"/>
        <source>M:</source>
        <translation>M:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="289"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="659"/>
        <source>Y:</source>
        <translation>Y:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="316"/>
        <source>K:</source>
        <translation>K:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="413"/>
        <source>Dynamic Color Bars</source>
        <translation>Dynamische Farbregler</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="938"/>
        <source>You cannot create a color without a name.
Please give it a name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="954"/>
        <source>The name of the color already exists.
Please choose another one.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="411"/>
        <source>Static Color Bars</source>
        <translation>Statische Farbregler</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="696"/>
        <source>R:</source>
        <translation>R:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="697"/>
        <source>G:</source>
        <translation>G:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="698"/>
        <source>B:</source>
        <translation>B:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="257"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="284"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="311"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="338"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="654"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="655"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="656"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <source>HSV-Colormap</source>
        <translation type="obsolete">HSV-Farbwähler</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="99"/>
        <source>&amp;Name:</source>
        <translation>&amp;Name:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="109"/>
        <source>Color &amp;Model</source>
        <translation>Farb&amp;modell</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="123"/>
        <source>Is Spot Color</source>
        <translation>Schmuckfarbe</translation>
    </message>
    <message>
        <source>Is Registration Color</source>
        <translation type="obsolete">Registrierungsfarbe</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="945"/>
        <source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
        <translation>Sie können keine Farbe mit der Bezeichnung &quot;%1&quot; erstellen.
Sie ist reserviert für Transparenz</translation>
    </message>
    <message>
        <source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
        <translation type="obsolete">Diese Option ermöglicht es, die Farbe auf allen Platten zu drucken. Registrierungsfarben werden für Druckermarken wie Schneidemarken oder Passkreuze verwendet. Sie werden üblicherweise nicht im Layout selbst gebraucht.</translation>
    </message>
    <message>
        <source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="obsolete">Wenn das Farbmanagement aktiviert ist, zeigt das Warndreieck an, dass die Farbe ausserhalb des Farbraums (Gamut) des gewählten Druckers ist. Das bedeutet, dass die Farbe nicht so wiedergegeben wird, wie am Monitor angezeigt. Weitere Hinweise zu diesem Thema finden Sie in der Online-Hilfe.</translation>
    </message>
    <message>
        <source>The name of the color already exists,
please choose another one.</source>
        <translation type="obsolete">Der Name existiert bereits. Bitte wählen Sie einen anderen.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="359"/>
        <source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
        <translation>Diese Option macht diese Farbe zu einer Schmuckfarbe, die eine zusätzliche Druckplatte benötigt. Schmuckfarben werden oft verwendet, wenn ein Logo oder eine andere Farbe besonders genau wiedergegeben werden soll oder nicht mit CMYK-Farben wiedergegeben werden kann. Metallic- oder Leuchtfarben sind gute Beispiele für nicht durch C,M,Y, und K wiederzugebende Farben.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="727"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="728"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation>Wenn das Farbmanagement aktiviert ist, zeigt ein Warndreieck an, dass die Farbe sich ausserhalb des Gamuts des ausgewählten Druckerprofils befindet. Dies bedeutet, dass die Farbe nicht so gedruckt werden kann, wie sie am Bildschirm angezeigt wird. Weitere Hinweise zu diesem Thema finden Sie in der Online-Hilfe unter &quot;Farbmanagement&quot;.</translation>
    </message>
    <message>
        <source>You cannot create a color without a name
Please give it a name</source>
        <translation type="obsolete">Sie können keine Farbe ohne Namen erzeugen
Bitte vergeben Sie einen Namen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cmykfw.cpp" line="188"/>
        <location filename="../../scribus/ui/cmykfw.cpp" line="199"/>
        <source>HSV Color Map</source>
        <translation>HSV-Farbwähler</translation>
    </message>
</context>
<context>
    <name>CStyleP</name>
    <message>
        <source>Form1</source>
        <translation type="obsolete">Form1</translation>
    </message>
    <message>
        <source>Based On:</source>
        <translation type="obsolete">Basiert auf:</translation>
    </message>
    <message>
        <source>Basic Formatting</source>
        <translation type="obsolete">Grundlegende Formatierung</translation>
    </message>
    <message>
        <source>Advanced Formatting</source>
        <translation type="obsolete">Erweiterte Formatierung</translation>
    </message>
    <message>
        <source>Colors</source>
        <translation type="obsolete">Farben</translation>
    </message>
</context>
<context>
    <name>CStylePBase</name>
    <message>
        <source>Form1</source>
        <translation type="obsolete">Form1</translation>
    </message>
    <message>
        <source>Parent</source>
        <translation type="obsolete">Verknüpft mit</translation>
    </message>
    <message>
        <source>Based On:</source>
        <translation type="obsolete">Basiert auf:</translation>
    </message>
    <message>
        <source>Basic Formatting</source>
        <translation type="obsolete">Grundlegende Formatierung</translation>
    </message>
    <message>
        <source>Advanced Formatting</source>
        <translation type="obsolete">Erweiterte Formatierung</translation>
    </message>
    <message>
        <source>Colors</source>
        <translation type="obsolete">Farben</translation>
    </message>
</context>
<context>
    <name>CWDialog</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="320"/>
        <source>Merging colors</source>
        <translation>Farben werden zusammengeführt</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="326"/>
        <source>Error: </source>
        <translation>Fehler:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="326"/>
        <source>Color %1 exists already!</source>
        <translation>Die Farbe %1 ist schon vorhanden!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="331"/>
        <source>Color %1 appended.</source>
        <translation>Farbe %1 wurde hinzugefügt.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="335"/>
        <source>Now opening the color manager.</source>
        <translation>Farbendialog wird geöffnet.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="338"/>
        <source>Color Merging</source>
        <translation>Farben hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="487"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation>Scribus konnte die gewünschte Farbe nicht finden. Sie haben wahrscheinlich Schwarz, Grau oder Weiss ausgewählt.
Es ist nicht möglich, diese Farben zu verarbeiten.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
        <source>Color Wheel</source>
        <translation>Farbkreis</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="45"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation>Klicken Sie auf das Farbrad, um die Ausgangsfarbe zu erhalten. Das Farbmodell wird vom ausgewählten Reiter bestimmt.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="52"/>
        <source>Result Colors</source>
        <translation>Ergebnis</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="77"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="322"/>
        <source>CMYK</source>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="82"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="543"/>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="87"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="729"/>
        <source>HSV</source>
        <translation>HSV</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="106"/>
        <source>Colors of your chosen color scheme.</source>
        <translation>Die Farben Ihres gewählten Farbschemas.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="116"/>
        <source>Color Scheme Method</source>
        <translation>Farbschema</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="142"/>
        <source>Angle:</source>
        <translation>Winkel:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="152"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation>Der Unterschied zwischen dem ausgewählten und den gezählten Werten. Weitere Informationen finden Sie in der Hilfe.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="167"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation>Wählen Sie eine der Methoden zur Erstellung eines Farbschemas aus.
Die Dokumentation enthält hierzu weitere Informationen.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="201"/>
        <source>Merge created colors into the document colors</source>
        <translation>Farben zu den Dokumentfarben hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="204"/>
        <source>&amp;Merge</source>
        <translation>&amp;Hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="207"/>
        <source>Alt+M</source>
        <translation>Alt+M</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="214"/>
        <source>Replace created colors in the document colors</source>
        <translation>Vorhandene Dokumentfarben durch die neuen Farben ersetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="217"/>
        <source>&amp;Replace</source>
        <translation>&amp;Ersetzen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="220"/>
        <source>Alt+R</source>
        <translation>Alt+R</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="227"/>
        <source>Leave colors untouched</source>
        <translation>Farben unverändert lassen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="230"/>
        <source>&amp;Cancel</source>
        <translation>A&amp;bbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="233"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="242"/>
        <source>Preview:</source>
        <translation>Vorschau:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="266"/>
        <source>Sample color scheme.</source>
        <translation>Vorschau der Farbharmonie.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="285"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation>Hier können Sie die Art der Sehbehinderung auswählen, die Sie simulieren wollen.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="292"/>
        <source>Vision Defect Type:</source>
        <translation>Art der Sehbehinderung:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="342"/>
        <source>C:</source>
        <translation>C:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="352"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="382"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="412"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="442"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="372"/>
        <source>M:</source>
        <translation>M:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="402"/>
        <source>Y:</source>
        <translation>Y:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="432"/>
        <source>K:</source>
        <translation>K:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="462"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="838"/>
        <source>RGB:</source>
        <translation>RGB:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="498"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="685"/>
        <source>HSV:</source>
        <translation>HSV:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="571"/>
        <source>R:</source>
        <translation>R:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="598"/>
        <source>G:</source>
        <translation>G:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="625"/>
        <source>B:</source>
        <translation>B:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="652"/>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="874"/>
        <source>CMYK:</source>
        <translation>CMYK:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="757"/>
        <source>H:</source>
        <translation>H:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="784"/>
        <source>S:</source>
        <translation>S:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="811"/>
        <source>V:</source>
        <translation>V:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="918"/>
        <source>Document</source>
        <translation>Dokument</translation>
    </message>
</context>
<context>
    <name>CWDialogBase</name>
    <message>
        <source>Color Wheel</source>
        <translation type="obsolete">Farbkreis</translation>
    </message>
    <message>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation type="obsolete">Klicken Sie auf das Farbrad, um die Ausgangsfarbe zu erhalten. Das Farbmodell wird vom ausgewählten Reiter bestimmt.</translation>
    </message>
    <message>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <source>C:</source>
        <translation type="obsolete">C:</translation>
    </message>
    <message>
        <source>M:</source>
        <translation type="obsolete">M:</translation>
    </message>
    <message>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <source>K:</source>
        <translation type="obsolete">K:</translation>
    </message>
    <message>
        <source>RGB:</source>
        <translation type="obsolete">RGB:</translation>
    </message>
    <message>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <source>R:</source>
        <translation type="obsolete">R:</translation>
    </message>
    <message>
        <source>G:</source>
        <translation type="obsolete">G:</translation>
    </message>
    <message>
        <source>B:</source>
        <translation type="obsolete">B:</translation>
    </message>
    <message>
        <source>CMYK:</source>
        <translation type="obsolete">CMYK:</translation>
    </message>
    <message>
        <source>Document</source>
        <translation type="obsolete">Dokument</translation>
    </message>
    <message>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">Wählen Sie eine der Methoden zur Erstellung eines Farbschemas aus.
Die Dokumentation enthält hierzu weitere Informationen.</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="obsolete">Winkel:</translation>
    </message>
    <message>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">Der Unterschied zwischen dem ausgewählten und den gezählten Werten. Weitere Informationen finden Sie in der Hilfe.</translation>
    </message>
    <message>
        <source>Preview:</source>
        <translation type="obsolete">Vorschau:</translation>
    </message>
    <message>
        <source>Vision Defect Type:</source>
        <translation type="obsolete">Art der Sehbehinderung:</translation>
    </message>
    <message>
        <source>Sample color scheme.</source>
        <translation type="obsolete">Vorschau der Farbharmonie.</translation>
    </message>
    <message>
        <source>Colors of your chosen color scheme.</source>
        <translation type="obsolete">Die Farben Ihres gewählten Farbschemas.</translation>
    </message>
    <message>
        <source>&amp;Merge</source>
        <translation type="obsolete">&amp;Hinzufügen</translation>
    </message>
    <message>
        <source>Alt+M</source>
        <translation type="obsolete">Alt+M</translation>
    </message>
    <message>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">Farben zu den Dokumentfarben hinzufügen</translation>
    </message>
    <message>
        <source>&amp;Replace</source>
        <translation type="obsolete">&amp;Ersetzen</translation>
    </message>
    <message>
        <source>Alt+R</source>
        <translation type="obsolete">Alt+R</translation>
    </message>
    <message>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">Vorhandene Dokumentfarben durch die neuen Farben ersetzen</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">A&amp;bbrechen</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>Leave colors untouched</source>
        <translation type="obsolete">Farben unverändert lassen</translation>
    </message>
    <message>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">Hier können Sie die Art der Sehbehinderung auswählen, die Sie simulieren wollen.</translation>
    </message>
    <message>
        <source>Color Scheme Method</source>
        <translation type="obsolete">Farbschema</translation>
    </message>
    <message>
        <source>HSV:</source>
        <translation type="obsolete">HSV:</translation>
    </message>
    <message>
        <source>HSV</source>
        <translation type="obsolete">HSV</translation>
    </message>
    <message>
        <source>H:</source>
        <translation type="obsolete">H:</translation>
    </message>
    <message>
        <source>S:</source>
        <translation type="obsolete">S:</translation>
    </message>
    <message>
        <source>V:</source>
        <translation type="obsolete">V:</translation>
    </message>
    <message>
        <source>Result Colors</source>
        <translation type="obsolete">Ergebnis</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
</context>
<context>
    <name>Canvas</name>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2431"/>
        <location filename="../../scribus/canvas.cpp" line="2459"/>
        <source>X: %1
Y: %2</source>
        <translation>X: %1
Y: %2</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2444"/>
        <source>X: %1</source>
        <translation>X: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2451"/>
        <source>Y: %1</source>
        <translation>Y: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2467"/>
        <source>Length: %1
Angle: %2</source>
        <translation>Länge: %1
Winkel: %2</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2469"/>
        <source>Width: %1
Height: %2</source>
        <translation>Breite: %1
Höhe: %2</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2481"/>
        <location filename="../../scribus/canvas.cpp" line="2488"/>
        <source>Angle: %1</source>
        <translation>Winkel: %1</translation>
    </message>
</context>
<context>
    <name>CanvasMode_EyeDropper</name>
    <message>
        <location filename="../../scribus/canvasmode_eyedropper.cpp" line="168"/>
        <source>The selected color does not exist in the document&apos;s color set. Please enter a name for this new color.</source>
        <translation>Die gewählte Farbe existiert im Farbsatz des Dokuments noch nicht. Bitte geben Sie einen Namen für die neue Farbe ein.</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_eyedropper.cpp" line="171"/>
        <source>Color Not Found</source>
        <translation>Farbe nicht gefunden</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_eyedropper.cpp" line="175"/>
        <source>The name you have selected already exists. Please enter a different name for this new color.</source>
        <translation>Eine Farbe mit diesem Namen existiert schon. Bitte geben Sie einen anderen Namen ein.</translation>
    </message>
</context>
<context>
    <name>CanvasMode_FrameLinks</name>
    <message>
        <location filename="../../scribus/canvasmode_framelinks.cpp" line="188"/>
        <source>Linking Text Frames</source>
        <translation>Textrahmen verketten</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_framelinks.cpp" line="192"/>
        <source>Before</source>
        <translation>Davor</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_framelinks.cpp" line="193"/>
        <source>After</source>
        <translation>Dahinter</translation>
    </message>
</context>
<context>
    <name>CanvasMode_Normal</name>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="389"/>
        <source>Go to Page %1</source>
        <translation>Gehe zu Seite %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="391"/>
        <source>Go to URL %1</source>
        <translation>Gehe zu URL %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="393"/>
        <source>Go to Page %1 in File %2</source>
        <translation>Gehe zu Seite %1 in Datei %2</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="434"/>
        <source>Overflow Characters: %1</source>
        <translation>Überfüllungszeichen: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1542"/>
        <source>Page %1 does not exist!</source>
        <translation>Seite %1 existiert nicht!</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1548"/>
        <source>Link Target is Web URL.
URL: %1</source>
        <translation>Link-Ziel ist eine Web-URL.
URL %1</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1549"/>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1554"/>
        <source>Information</source>
        <translation>Information</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1553"/>
        <source>Link Target is external File.
File: %1
Page: %2</source>
        <translation>Link-Ziel ist eine externe Datei.
Datei: %1
Seite: %2</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1820"/>
        <source>All Supported Formats</source>
        <translation>Alle unterstützten Formate</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1848"/>
        <source>Open</source>
        <translation>Öffnen</translation>
    </message>
</context>
<context>
    <name>CellStyleComboBox</name>
    <message>
        <location filename="../../scribus/ui/spalette.cpp" line="145"/>
        <location filename="../../scribus/ui/spalette.cpp" line="158"/>
        <location filename="../../scribus/ui/spalette.cpp" line="169"/>
        <source>No Style</source>
        <translation>Kein Stil</translation>
    </message>
</context>
<context>
    <name>CgmPlug</name>
    <message>
        <source>Group%1</source>
        <translation type="obsolete">Gruppe%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/cgm/importcgm.cpp" line="191"/>
        <source>Importing: %1</source>
        <translation>Importiere: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/cgm/importcgm.cpp" line="194"/>
        <source>Analyzing File:</source>
        <translation>Analysieren der Datei:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/cgm/importcgm.cpp" line="441"/>
        <source>Generating Items</source>
        <translation>Objekte werden erstellt</translation>
    </message>
</context>
<context>
    <name>CharSelect</name>
    <message>
        <source>Font:</source>
        <translation type="obsolete">Schrift:</translation>
    </message>
    <message>
        <source>Character Class:</source>
        <translation type="obsolete">Zeichensatz:</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation type="obsolete">Ein&amp;fügen</translation>
    </message>
    <message>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;Entfernen</translation>
    </message>
    <message>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="obsolete">Zeichen an Cursorposition einfügen</translation>
    </message>
    <message>
        <source>Delete the current selection(s).</source>
        <translation type="obsolete">Markierung(en) löschen.</translation>
    </message>
    <message>
        <source>Full Character Set</source>
        <translation type="obsolete">Kompletter Zeichensatz</translation>
    </message>
    <message>
        <source>Basic Latin</source>
        <translation type="obsolete">Basis Latein</translation>
    </message>
    <message>
        <source>Latin-1 Supplement</source>
        <translation type="obsolete">Latein-1</translation>
    </message>
    <message>
        <source>Latin Extended-A</source>
        <translation type="obsolete">Latein erweitert-A</translation>
    </message>
    <message>
        <source>Latin Extended-B</source>
        <translation type="obsolete">Latein erweitert-B</translation>
    </message>
    <message>
        <source>General Punctuation</source>
        <translation type="obsolete">Allgemeine Interpunktion</translation>
    </message>
    <message>
        <source>Super- and Subscripts</source>
        <translation type="obsolete">Hoch- und Tiefstellungen</translation>
    </message>
    <message>
        <source>Currency Symbols</source>
        <translation type="obsolete">Währungssymbole</translation>
    </message>
    <message>
        <source>Letterlike Symbols</source>
        <translation type="obsolete">Buchstabensymbole</translation>
    </message>
    <message>
        <source>Number Forms</source>
        <translation type="obsolete">Zahlensysmbole</translation>
    </message>
    <message>
        <source>Arrows</source>
        <translation type="obsolete">Pfeilsymbole</translation>
    </message>
    <message>
        <source>Mathematical Operators</source>
        <translation type="obsolete">Mathematische Operatoren</translation>
    </message>
    <message>
        <source>Box Drawing</source>
        <translation type="obsolete">Rahmensymbole</translation>
    </message>
    <message>
        <source>Block Elements</source>
        <translation type="obsolete">Blocksymbole</translation>
    </message>
    <message>
        <source>Geometric Shapes</source>
        <translation type="obsolete">Geometrische Formen</translation>
    </message>
    <message>
        <source>Miscellaneous Symbols</source>
        <translation type="obsolete">Sonstige Symbole</translation>
    </message>
    <message>
        <source>Dingbats</source>
        <translation type="obsolete">Dingbats</translation>
    </message>
    <message>
        <source>Small Form Variants</source>
        <translation type="obsolete">Kleine Symbole</translation>
    </message>
    <message>
        <source>Ligatures</source>
        <translation type="obsolete">Ligaturen</translation>
    </message>
    <message>
        <source>Specials</source>
        <translation type="obsolete">Spezielle Zeichen</translation>
    </message>
    <message>
        <source>Greek</source>
        <translation type="obsolete">Griechisch</translation>
    </message>
    <message>
        <source>Greek Extended</source>
        <translation type="obsolete">Griechisch erweitert</translation>
    </message>
    <message>
        <source>Cyrillic</source>
        <translation type="obsolete">Kyrillisch</translation>
    </message>
    <message>
        <source>Cyrillic Supplement</source>
        <translation type="obsolete">Kyrillisch Zusätze</translation>
    </message>
    <message>
        <source>Arabic</source>
        <translation type="obsolete">Arabisch</translation>
    </message>
    <message>
        <source>Arabic Extended A</source>
        <translation type="obsolete">Arabisch erweitert A</translation>
    </message>
    <message>
        <source>Arabic Extended B</source>
        <translation type="obsolete">Arabisch erweitert B</translation>
    </message>
    <message>
        <source>Hebrew</source>
        <translation type="obsolete">Hebräisch</translation>
    </message>
    <message>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="obsolete">Wenn Sie die rechte Maustaste drücken und gedrückt halten, sehen Sie ein Vorschaubild. Die Taste Einfügen fügt ein Zeichen in die Markierung unten ein, und die Taste Löschen entfernt das letzte Zeichen wieder</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="28"/>
        <source>Scribus Char Palette (*.ucp);;All Files (*)</source>
        <translation>Scribus-Zeichenpalette (*.ucp);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Enhanced Palette</source>
        <translation type="obsolete">Erweiterte Palette</translation>
    </message>
    <message>
        <source>Quick Palette</source>
        <translation type="obsolete">Kompaktpalette</translation>
    </message>
    <message>
        <source>Hide Enhanced</source>
        <translation type="obsolete">Erweiterte Palette verbergen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="226"/>
        <source>Choose a filename to open</source>
        <translation>Wählen Sie eine Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="260"/>
        <location filename="../../scribus/ui/charselect.cpp" line="302"/>
        <source>Error</source>
        <translation>Fehler</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="261"/>
        <source>Error reading file %1 - file is corrupted propably.</source>
        <translation>Fehler beim Öffnen der Datei %1 - Die Datei ist möglicherweise beschädigt.</translation>
    </message>
    <message>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Speichern als</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="303"/>
        <source>Cannot write file %1</source>
        <translation>Kann Datei %1 nicht speichern</translation>
    </message>
    <message>
        <source>Clean the Palette?</source>
        <translation type="obsolete">Inhalt entfernen?</translation>
    </message>
    <message>
        <source>You will clean all characters from this palette. Are you sure?</source>
        <translation type="obsolete">Sind Sie sicher, dass Sie alle Zeichen entfernen möchten?</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.ui" line="13"/>
        <source>Character Palette</source>
        <translation>Zeichenpalette</translation>
    </message>
    <message>
        <source>&amp;Search</source>
        <translation type="obsolete">&amp;Suchen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="311"/>
        <source>Empty the Palette?</source>
        <translation>Palette leeren?</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="312"/>
        <source>You will remove all characters from this palette. Are you sure?</source>
        <translation>Sie sind dabei, alle Zeichen aus der Palette zu entfernen. Sind Sie sicher?</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.ui" line="24"/>
        <source>Hide/Show Enhanced Palette</source>
        <translation>Erweiterte Palette anzeigen/verbergen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselect.cpp" line="275"/>
        <source>Save Quick Character Palette</source>
        <translation>Die aktuelle Kompaktpalette speichern</translation>
    </message>
</context>
<context>
    <name>CharSelectEnhanced</name>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="208"/>
        <source>Full Character Set</source>
        <translation>Kompletter Zeichensatz</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="213"/>
        <source>Basic Latin</source>
        <translation>Basis Latein</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="219"/>
        <source>Latin-1 Supplement</source>
        <translation>Latein-1</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="225"/>
        <source>Latin Extended-A</source>
        <translation>Latein erweitert-A</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="231"/>
        <source>Latin Extended-B</source>
        <translation>Latein erweitert-B</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="237"/>
        <source>General Punctuation</source>
        <translation>Allgemeine Interpunktion</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="243"/>
        <source>Super- and Subscripts</source>
        <translation>Hoch- und Tiefstellungen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="249"/>
        <source>Currency Symbols</source>
        <translation>Währungssymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="255"/>
        <source>Letterlike Symbols</source>
        <translation>Buchstabensymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="261"/>
        <source>Number Forms</source>
        <translation>Zahlensysmbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="267"/>
        <source>Arrows</source>
        <translation>Pfeilsymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="273"/>
        <source>Mathematical Operators</source>
        <translation>Mathematische Operatoren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="279"/>
        <source>Box Drawing</source>
        <translation>Rahmensymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="285"/>
        <source>Block Elements</source>
        <translation>Blocksymbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="291"/>
        <source>Geometric Shapes</source>
        <translation>Geometrische Formen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="297"/>
        <source>Miscellaneous Symbols</source>
        <translation>Sonstige Symbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="303"/>
        <source>Dingbats</source>
        <translation>Dingbats</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="309"/>
        <source>Small Form Variants</source>
        <translation>Kleine Symbole</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="315"/>
        <source>Ligatures</source>
        <translation>Ligaturen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="321"/>
        <source>Specials</source>
        <translation>Spezielle Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="327"/>
        <source>Greek</source>
        <translation>Griechisch</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="333"/>
        <source>Greek Extended</source>
        <translation>Griechisch erweitert</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="339"/>
        <source>Cyrillic</source>
        <translation>Kyrillisch</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="345"/>
        <source>Cyrillic Supplement</source>
        <translation>Kyrillisch Zusätze</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="351"/>
        <source>Arabic</source>
        <translation>Arabisch</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="357"/>
        <source>Arabic Extended A</source>
        <translation>Arabisch erweitert A</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="363"/>
        <source>Arabic Extended B</source>
        <translation>Arabisch erweitert B</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.cpp" line="369"/>
        <source>Hebrew</source>
        <translation>Hebräisch</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="13"/>
        <source>Enhanced Character Palette</source>
        <translation>Erweiterte Zeichenpalette</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="19"/>
        <source>&amp;Font:</source>
        <translation>Schri&amp;ft:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="45"/>
        <source>C&amp;haracter Class:</source>
        <translation>Zeic&amp;henklasse:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="77"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation>Sie können eine Vorschau sehen, wenn Sie die rechte Maustaste gedrückt halten.Der &quot;Einfügen&quot;-Button fügt ein Zeichen in die Textauswahl ein. &quot;Entfernen&quot; löscht das zuletzt hinzugefügte Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="96"/>
        <source>Insert &amp;Code:</source>
        <translation>&amp;Code eingeben:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="131"/>
        <source>Glyphs to Insert</source>
        <translation>Einzufügende Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="171"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation>Zeichen an Cursorposition einfügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="174"/>
        <source>&amp;Insert</source>
        <translation>Ein&amp;fügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="184"/>
        <source>Delete the current selection(s).</source>
        <translation>Markierung(en) löschen.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="187"/>
        <source>C&amp;lear</source>
        <translation>&amp;Entfernen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/charselectenhanced.ui" line="106"/>
        <source>Type in a four digit Unicode value directly here</source>
        <translation>Geben Sie hier einen vierstelligen Unicode-Wert ein</translation>
    </message>
</context>
<context>
    <name>CharStyleComboBox</name>
    <message>
        <location filename="../../scribus/ui/spalette.cpp" line="90"/>
        <location filename="../../scribus/ui/spalette.cpp" line="103"/>
        <location filename="../../scribus/ui/spalette.cpp" line="114"/>
        <source>No Style</source>
        <translation>Kein Stil</translation>
    </message>
</context>
<context>
    <name>CharTable</name>
    <message>
        <source>Delete</source>
        <translation type="obsolete">Löschen</translation>
    </message>
</context>
<context>
    <name>CharTableView</name>
    <message>
        <location filename="../../scribus/chartableview.cpp" line="22"/>
        <source>Delete</source>
        <translation>Löschen</translation>
    </message>
</context>
<context>
    <name>CheckDocument</name>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="678"/>
        <source>Glyphs missing</source>
        <translation>Fehlende Zeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="679"/>
        <source>Text overflow</source>
        <translation>Überfliessender Text</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="680"/>
        <source>Object is not on a Page</source>
        <translation>Objekt ausserhalb einer Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="681"/>
        <source>Missing Image</source>
        <translation>Fehlendes Bild</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="683"/>
        <source>Empty Text Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="686"/>
        <source>Object has transparency</source>
        <translation>Transparenz wird verwendet</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="687"/>
        <source>Object is a PDF Annotation or Field</source>
        <translation>Objekt ist eine PDF-Anmerkung oder ein PDF-Feld</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="688"/>
        <source>Object is a placed PDF</source>
        <translation>Objekt ist eine importierte PDF-Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="691"/>
        <source>Image dimension is smaller than its frame</source>
        <translation>Die Bildabmessungen sind kleiner als der Rahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="692"/>
        <source>Object colorspace is not CMYK or spot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="693"/>
        <source>Imported document contains non embedded fonts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="695"/>
        <source>Applied master page has different page destination (left, middle, right side)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="324"/>
        <source>Document</source>
        <translation>Dokument</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="326"/>
        <source>No Problems found</source>
        <translation>Keine Probleme gefunden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="575"/>
        <source>Page </source>
        <translation>Seite </translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="637"/>
        <source>Free Objects</source>
        <translation>Freie Objekte</translation>
    </message>
    <message>
        <source>Problems found</source>
        <translation type="obsolete">Es sind Probleme aufgetaucht</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="663"/>
        <source>Preflight Verifier</source>
        <translation>Druckvorstufenüberprüfung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="665"/>
        <source>Items</source>
        <translation>Objekte</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="665"/>
        <source>Problems</source>
        <translation>Probleme</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="670"/>
        <source>Current Profile:</source>
        <translation>Aktuelles Profil:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="641"/>
        <location filename="../../scribus/ui/checkDocument.cpp" line="671"/>
        <source>&amp;Ignore Errors</source>
        <translation>Fehler ig&amp;norieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="672"/>
        <source>Check again</source>
        <translation>Nochmals überprüfen</translation>
    </message>
    <message>
        <source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
        <translation type="obsolete">Auflösung ist keiner als %1 dpi, aktuell %2 x %3 dpi</translation>
    </message>
    <message>
        <source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
        <translation type="obsolete">Auflösung ist grösser als %1 dpi, aktuell %2 x %3 dpi</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="689"/>
        <source>Image is GIF</source>
        <translation>Das Bild ist eine GIF-Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="327"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="366"/>
        <source>Transparency used</source>
        <translation>Transparenz verwendet</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="371"/>
        <source>Blendmode used</source>
        <translation>Farbüberblendung verwendet</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="383"/>
        <source>Layer &quot;%1&quot;</source>
        <translation>Ebene &quot;%1&quot;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="388"/>
        <location filename="../../scribus/ui/checkDocument.cpp" line="475"/>
        <location filename="../../scribus/ui/checkDocument.cpp" line="567"/>
        <source>Issues: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="690"/>
        <source>Annotation uses a non TrueType font</source>
        <translation>Anmerkung enthält keine TrueTypeSchrift</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="682"/>
        <source>Empty Image Frame</source>
        <translation>Leerer Bildrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="674"/>
        <source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
        <translation>Preflight-Profil, auf dem eine Warnung basieren kann. Die Optionen befinden sich unter &quot;Dokument einrichten&quot; und  in den &quot;Allgemeinen Einstellungen&quot;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="675"/>
        <source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
        <translation>Die gefundenen Fehler ignorieren und den Druck oder Export fortsetzen. Hierzu sollten Sie sicher sein, die ignorierten Fehler verstanden zu haben.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="676"/>
        <source>Rerun the document scan to check corrections you may have made</source>
        <translation>Das Dokument einschliesslich etwaiger Änderungen erneut überprüfen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="347"/>
        <source>Layers</source>
        <translation>Ebenen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="340"/>
        <source>After Marks update document was changed</source>
        <translation>Nach der Aktualisierung der Textmarken hat sich das Layout geändert</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="376"/>
        <source>Print/Visible Mismatch</source>
        <translation>Druckbarkeit/Sichtbarkeit von Ebenen inkonsistent</translation>
    </message>
    <message>
        <source>Issue(s): %1</source>
        <translation type="obsolete">Problem(e): %1</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="397"/>
        <source>Master Pages</source>
        <translation>Musterseiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="666"/>
        <source>Layer</source>
        <translation>Ebene</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="684"/>
        <source>Image resolution below %1 DPI,
currently %2 x %3 DPI</source>
        <translation>Bildauflösung geringer als %1 DPI
Zur Zeit sind es %2 x %3 DPI</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/checkDocument.cpp" line="685"/>
        <source>Image resolution above %1 DPI,
currently %2 x %3 DPI</source>
        <translation>Bildauflösung höher als %1 DPIZur Zeit sind es %2 x %3 DPI</translation>
    </message>
</context>
<context>
    <name>ChooseStyles</name>
    <message>
        <source>Choose Styles</source>
        <translation type="obsolete">Stile wählen</translation>
    </message>
    <message>
        <source>Available Styles</source>
        <translation type="obsolete">Verfügbare Stile</translation>
    </message>
</context>
<context>
    <name>ClockWidget</name>
    <message>
        <location filename="../../scribus/ui/clockwidget.cpp" line="77"/>
        <source>A</source>
        <translation>A</translation>
    </message>
</context>
<context>
    <name>CollectForOutput</name>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="73"/>
        <source>Choose a Directory</source>
        <translation>Wählen Sie ein Verzeichnis</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="103"/>
        <source>Cannot create directory:
%1</source>
        <translation>Verzeichnis %1 kann nicht angelegt werden</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="118"/>
        <source>Collecting...</source>
        <translation>Stelle die notwendigen Dateien zusammen...</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="122"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation>Es können nicht alle Dateien für die Datei %1 
zusammengestellt werden</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="137"/>
        <source>Cannot collect the file: 
%1</source>
        <translation>Fehler beim Zusammenstellen der Datei
%1</translation>
    </message>
</context>
<context>
    <name>CollectForOutput_UI</name>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="39"/>
        <source>Collecting Items:</source>
        <translation>Objekte werden zusammengestellt:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="42"/>
        <source>Collecting Patterns:</source>
        <translation>Füllmuster werden zusammengestellt:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="48"/>
        <source>Collecting Fonts:</source>
        <translation>Schriften werden zusammengestellt:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="54"/>
        <source>Collecting Profiles:</source>
        <translation>Profile werden zusammengestellt:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="87"/>
        <source>Collecting...</source>
        <translation>Stelle die notwendigen Dateien zusammen...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="91"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation>Es können nicht alle Dateien für die Datei %1 
zusammengestellt werden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/collectforoutput_ui.cpp" line="114"/>
        <source>Cannot collect the file: 
%1</source>
        <translation>Fehler beim Zusammenstellen der Datei
%1</translation>
    </message>
</context>
<context>
    <name>ColorListBox</name>
    <message>
        <location filename="../../scribus/ui/colorlistbox.cpp" line="250"/>
        <source>Sort by Name</source>
        <translation>Nach Namen sortieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/colorlistbox.cpp" line="251"/>
        <source>Sort by Color</source>
        <translation>Nach Farbe sortieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/colorlistbox.cpp" line="252"/>
        <source>Sort by Type</source>
        <translation>Nach Typ sortieren</translation>
    </message>
</context>
<context>
    <name>ColorManager</name>
    <message>
        <source>Colors</source>
        <translation type="obsolete">Farben</translation>
    </message>
    <message>
        <source>&amp;Import</source>
        <translation type="obsolete">&amp;Importieren</translation>
    </message>
    <message>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Neu</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Bearbeiten</translation>
    </message>
    <message>
        <source>D&amp;uplicate</source>
        <translation type="obsolete">&amp;Duplizieren</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Löschen</translation>
    </message>
    <message>
        <source>&amp;Remove Unused</source>
        <translation type="obsolete">Unbenutzte &amp;entfernen</translation>
    </message>
    <message>
        <source>Color Sets</source>
        <translation type="obsolete">Farbpaletten</translation>
    </message>
    <message>
        <source>Current Color Set:</source>
        <translation type="obsolete">Aktive Palette:</translation>
    </message>
    <message>
        <source>&amp;Save Color Set</source>
        <translation type="obsolete">Farbpalette &amp;speichern</translation>
    </message>
    <message>
        <source>Choose a color set to load</source>
        <translation type="obsolete">Farbpalette auswählen</translation>
    </message>
    <message>
        <source>Save the current color set</source>
        <translation type="obsolete">Farbpalette speichern</translation>
    </message>
    <message>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation type="obsolete">Unbenutzte Farben entfernen</translation>
    </message>
    <message>
        <source>Import colors to the current set from an existing document</source>
        <translation type="obsolete">Importiert Farben aus einem existierenden Dokument</translation>
    </message>
    <message>
        <source>Create a new color within the current set</source>
        <translation type="obsolete">Neue Farbe anlegen</translation>
    </message>
    <message>
        <source>Edit the currently selected color</source>
        <translation type="obsolete">Farbe bearbeiten</translation>
    </message>
    <message>
        <source>Make a copy of the currently selected color</source>
        <translation type="obsolete">Kopie der ausgewählen Farbe anlegen</translation>
    </message>
    <message>
        <source>Delete the currently selected color</source>
        <translation type="obsolete">Ausgewählte Farbe löschen</translation>
    </message>
    <message>
        <source>Make the current colorset the default color set</source>
        <translation type="obsolete">Aktuelle Farbpalette zur Voreinstellung machen</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;Name:</translation>
    </message>
    <message>
        <source>Choose a Name</source>
        <translation type="obsolete">Namen wählen</translation>
    </message>
    <message>
        <source>Open</source>
        <translation type="obsolete">Öffnen</translation>
    </message>
    <message>
        <source>Copy of %1</source>
        <translation type="obsolete">Kopie von %1</translation>
    </message>
    <message>
        <source>New Color</source>
        <translation type="obsolete">Neue Farbe</translation>
    </message>
    <message>
        <source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="obsolete">Wenn das Farbmanagement aktiviert ist, zeigt das Warndreieck an, dass die Farbe ausserhalb des Farbraums (Gamut) des gewählten Druckers ist. Das bedeutet, dass die Farbe nicht so wiedergegeben wird, wie am Monitor angezeigt. Weitere Hinweise zu diesem Thema finden Sie in der Online-Hilfe.</translation>
    </message>
    <message>
        <source>Documents (*.sla *.scd);;Other Files (*.eps *.epsi *.ps *.ai);;All Files (*)</source>
        <translation type="obsolete">Dokumente (*.sla *.scd);;Andere Dateien (*eps *.epsi *.ps *.ai);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.epsi *.ps *.ai);;All Files (*)</source>
        <translation type="obsolete">Dokumente (*.sla *.sla.gz *.scd *.scd.gz);;Andere Dateien (*.eps *.epsi *.ps *.ai);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Information</source>
        <translation type="obsolete">Information</translation>
    </message>
    <message>
        <source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import. 
Not all files have DSC conformant comments where the color descriptions are located.
 This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
        <translation type="obsolete">Die Datei %1 enthält keine Farben, die importiert werden können. 
Falls es sich um eine Datei handelt, die auf PostScript basiert, versuchen Sie, diese per Datei &gt; Importieren zu laden.
Nicht alle Dateien enthalten DSC-konforme Kommentare, in denen die Farbbeschreibungen gespeichert sind. 
Daher können Farben aus einigen Dateien nicht importiert werden.
Weitere Informationen finden Sie in der Dokumentation.</translation>
    </message>
    <message>
        <source>Import</source>
        <translation type="obsolete">Importieren</translation>
    </message>
    <message>
        <source>Documents (%1);;Other Files (%2);;All Files (*)</source>
        <translation type="obsolete">Dokumente (%1);;Andere Dateien (%2);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
        <translation type="obsolete">Wenn das Farbmanagement aktiviert ist, zeigt ein Warnzeichen an, dass die Farbe ausserhalb des Farbraumes des aktuellen Druckerprofils liegt. Das bedeutet, dass die Farbe möglicherweise nicht so gedruckt werden kann, wie sie am Bildschirm aussieht. Schmuckfarben werden durch einen roten Punkt angezeigt. Registrierungsfarben werden durch eine Registrierungsfarbe gekennzeichnet. Weitere Hinweise zum Farbmanagement finden Sie in der Scribus-Hilfe.</translation>
    </message>
    <message>
        <source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
        <translation type="obsolete">Alle unterstützten Formate (%1);;Dokumente (%2);;Andere Dateien (%3);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Import Colors</source>
        <translation type="obsolete">Farben importieren</translation>
    </message>
</context>
<context>
    <name>ColorWheel</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
        <source>Monochromatic</source>
        <translation>Monochromatische Farben</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
        <source>Analogous</source>
        <translation>Analoge Farben</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="141"/>
        <source>Complementary</source>
        <translation>Komplementärfarbe</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
        <source>Split Complementary</source>
        <translation>Gespaltene Komplementärfarben</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
        <source>Triadic</source>
        <translation>Triadisch</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
        <source>Tetradic (Double Complementary)</source>
        <translation>Triadisch (Doppelte Komplementärfarben)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
        <source>Base Color</source>
        <translation>Grundfarbe</translation>
    </message>
    <message>
        <source>Monochromatic Light</source>
        <translation type="obsolete">Monochromatisch hell</translation>
    </message>
    <message>
        <source>Monochromatic Dark</source>
        <translation type="obsolete">Monochromatisch dunkel</translation>
    </message>
    <message>
        <source>1st. Analogous</source>
        <translation type="obsolete">1. Analoge Farbe</translation>
    </message>
    <message>
        <source>2nd. Analogous</source>
        <translation type="obsolete">2. Analoge Farbe</translation>
    </message>
    <message>
        <source>1st. Split</source>
        <translation type="obsolete">1. Teilung</translation>
    </message>
    <message>
        <source>2nd. Split</source>
        <translation type="obsolete">2. Teilung</translation>
    </message>
    <message>
        <source>3rd. Split</source>
        <translation type="obsolete">3. Teilung</translation>
    </message>
    <message>
        <source>4th. Split</source>
        <translation type="obsolete">4. Teilung</translation>
    </message>
    <message>
        <source>1st. Triadic</source>
        <translation type="obsolete">1. Triade</translation>
    </message>
    <message>
        <source>2nd. Triadic</source>
        <translation type="obsolete">2. Triade</translation>
    </message>
    <message>
        <source>1st. Tetradic (base opposite)</source>
        <translation type="obsolete">1. Tetrade (entgegengesetzte Richtung)</translation>
    </message>
    <message>
        <source>2nd. Tetradic (angle)</source>
        <translation type="obsolete">2. Tetrade (Winkel)</translation>
    </message>
    <message>
        <source>3rd. Tetradic (angle opposite)</source>
        <translation type="obsolete">3. Tetrade (gegenüberliegender Winkel)</translation>
    </message>
</context>
<context>
    <name>ColorWheelPlugin</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="48"/>
        <source>&amp;Color Wheel...</source>
        <translation>Farb&amp;kreis...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="66"/>
        <source>Color setting helper</source>
        <translation>Hilfsmittel zur Erstellung von Farbschemata</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="67"/>
        <source>Color selector with color theory included.</source>
        <translation>Farbwähler basierend auf Farbenlehren.</translation>
    </message>
</context>
<context>
    <name>ColumnResize</name>
    <message>
        <location filename="../../scribus/canvasgesture_columnresize.cpp" line="92"/>
        <source>Width</source>
        <translation>Breite</translation>
    </message>
</context>
<context>
    <name>CommonStrings</name>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="272"/>
        <source>&amp;Apply</source>
        <translation>An&amp;wenden</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="275"/>
        <source>&amp;Cancel</source>
        <translation>A&amp;bbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="282"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="285"/>
        <source>&amp;Save</source>
        <translation>&amp;Speichern</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="288"/>
        <source>Warning</source>
        <translation>Warnung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="279"/>
        <source>None</source>
        <comment>color name</comment>
        <translation>Keine</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="302"/>
        <source>PDF 3D Annotation</source>
        <translation>PDF-3D-Anmerkung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="303"/>
        <source>Symbol</source>
        <translation>Symbol</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="304"/>
        <source>Group</source>
        <translation>Gruppe</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="305"/>
        <source>Regular Polygon</source>
        <translation>Regelmässiges Polygon</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="306"/>
        <source>Arc</source>
        <translation>Kreisbogen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="307"/>
        <source>Spiral</source>
        <translation>Spirale</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="308"/>
        <source>Table</source>
        <translation>Tabelle</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="311"/>
        <source>PDF Radio Button</source>
        <translation>PDF-&quot;Radio&quot;-Schaltfläche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="318"/>
        <source>Button</source>
        <translation>Schaltfläche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="319"/>
        <source>RadioButton</source>
        <translation>&quot;Radio&quot;-Schaltfläche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="320"/>
        <source>Textfield</source>
        <translation>Textfeld</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="321"/>
        <source>Checkbox</source>
        <translation></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="322"/>
        <source>Combobox</source>
        <translation></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="323"/>
        <source>Listbox</source>
        <translation></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="324"/>
        <source>TextAnnot</source>
        <translation>Textanmerkung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="325"/>
        <source>Link</source>
        <translation>Verknüpfung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="329"/>
        <source>Custom</source>
        <comment>CommonStrings, custom page size</comment>
        <translation>Benutzerdefiniert</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="335"/>
        <source>Single Page</source>
        <translation>Einzelne Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="336"/>
        <source>Double Sided</source>
        <translation>Doppelseite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="337"/>
        <source>3-Fold</source>
        <translation>3fach gefaltet</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="338"/>
        <source>4-Fold</source>
        <translation>4fach gefaltet</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="374"/>
        <source>Default Table Style</source>
        <translation>Standard-Tabellenstil</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="375"/>
        <source>Default Cell Style</source>
        <translation>Standard-Zellenstil</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="378"/>
        <source>Monday</source>
        <translation>Montag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="379"/>
        <source>Tuesday</source>
        <translation>Dienstag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="380"/>
        <source>Wednesday</source>
        <translation>Mittwoch</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="381"/>
        <source>Thursday</source>
        <translation>Donnerstag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="382"/>
        <source>Friday</source>
        <translation>Freitag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="383"/>
        <source>Saturday</source>
        <translation>Samstag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="384"/>
        <source>Sunday</source>
        <translation>Sonntag</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="385"/>
        <source>January</source>
        <translation>Januar</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="386"/>
        <source>February</source>
        <translation>Februar</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="387"/>
        <source>March</source>
        <translation>März</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="388"/>
        <source>April</source>
        <translation>April</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="389"/>
        <source>May</source>
        <translation>Mai</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="390"/>
        <source>June</source>
        <translation>Juni</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="391"/>
        <source>July</source>
        <translation>Juli</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="392"/>
        <source>August</source>
        <translation>August</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="393"/>
        <source>September</source>
        <translation>September</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="394"/>
        <source>October</source>
        <translation>Oktober</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="395"/>
        <source>November</source>
        <translation>November</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="396"/>
        <source>December</source>
        <translation>Dezember</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="462"/>
        <source>Alt</source>
        <translation>Alt</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="463"/>
        <source>Shift</source>
        <translation>Shift</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="466"/>
        <source>Cmd</source>
        <translation>Cmd</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="467"/>
        <location filename="../../scribus/commonstrings.cpp" line="470"/>
        <location filename="../../scribus/commonstrings.cpp" line="474"/>
        <source>Ctrl</source>
        <translation>Strg</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="471"/>
        <source>Windows</source>
        <translation>Fenster</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="475"/>
        <source>Meta</source>
        <translation>Meta</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="290"/>
        <source>Yes</source>
        <translation>Ja</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="291"/>
        <source>No</source>
        <translation>Nein</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="292"/>
        <source>&amp;Yes</source>
        <translation>&amp;Ja</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="293"/>
        <source>&amp;No</source>
        <translation>N&amp;ein</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="345"/>
        <source>Left Page</source>
        <comment>Left page location</comment>
        <translation>Linke Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="346"/>
        <source>Middle</source>
        <comment>Middle page location</comment>
        <translation>Mitte</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="347"/>
        <source>Middle Left</source>
        <comment>Middle Left page location</comment>
        <translation>Mitte links</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="348"/>
        <source>Middle Right</source>
        <comment>Middle Right page location</comment>
        <translation>Mitte rechts</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="349"/>
        <source>Right Page</source>
        <comment>Right page location</comment>
        <translation>Rechte Seite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="352"/>
        <source>Normal</source>
        <comment>Default single master page</comment>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="354"/>
        <source>Normal Left</source>
        <comment>Default left master page</comment>
        <translation>Normal links</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="356"/>
        <source>Normal Middle</source>
        <comment>Default middle master page</comment>
        <translation>Normal Mitte</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="358"/>
        <source>Normal Right</source>
        <comment>Default right master page</comment>
        <translation>Normal rechts</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="402"/>
        <source>Monochrome</source>
        <comment>Colorspace</comment>
        <translation>Monochrome</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="405"/>
        <source>Normal Vision</source>
        <comment>Color Blindness - Normal Vision</comment>
        <translation>Normales Sehvermögen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="406"/>
        <source>Protanopia (Red)</source>
        <comment>Color Blindness - Red Color Blind</comment>
        <translation>Rotgrünblindheit</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="407"/>
        <source>Deuteranopia (Green)</source>
        <comment>Color Blindness - Greed Color Blind</comment>
        <translation>Grünblindheit</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="408"/>
        <source>Tritanopia (Blue)</source>
        <comment>Color Blindness - Blue Color Blind</comment>
        <translation>Blaublindheit</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="409"/>
        <source>Full Color Blindness</source>
        <comment>Color Blindness - Full Color Blindness</comment>
        <translation>Komplett farbenblind</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="411"/>
        <source>Custom: </source>
        <comment>Custom Tab Fill Option</comment>
        <translation>Benutzerdefiniert: </translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="360"/>
        <source>Solid Line</source>
        <translation>Durchgehend</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="361"/>
        <source>Dashed Line</source>
        <translation>Gestrichelt</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="362"/>
        <source>Dotted Line</source>
        <translation>Gepunktet</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="363"/>
        <source>Dash Dot Line</source>
        <translation>Strich-Punkt</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="364"/>
        <source>Dash Dot Dot Line</source>
        <translation>Strich-Punkt-Punkt</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="278"/>
        <source>None</source>
        <translation>Keine</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="413"/>
        <source>None</source>
        <comment>Optical Margin Setting</comment>
        <translation>Keiner</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="414"/>
        <source>Left Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>Linker Überstand</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="415"/>
        <source>Right Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>Rechter Überstand</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="416"/>
        <source>Left Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>Zeicheneinzug links</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="417"/>
        <source>Right Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>Zeicheneinzug rechts</translation>
    </message>
    <message>
        <source>Both sides</source>
        <comment>Optical Margin Setting</comment>
        <translation type="obsolete">Beidseitig</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="421"/>
        <source>Min. Word Tracking</source>
        <translation>Minimale Laufweite</translation>
    </message>
    <message>
        <source>Norm. Word Tracking</source>
        <translation type="obsolete">Normale Laufweite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="425"/>
        <source>Min. Glyph Extension</source>
        <translation>Minimale Glyphenstauchung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="426"/>
        <source>Max. Glyph Extension</source>
        <translation>Maximale Glyphenstauchung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="418"/>
        <source>Default</source>
        <comment>Optical Margin Setting</comment>
        <translation>Standard</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="422"/>
        <source>Max. Word Tracking</source>
        <translation>Maximaler Wortabstand</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="398"/>
        <source>RGB</source>
        <comment>Colorspace</comment>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="399"/>
        <source>CMYK</source>
        <comment>Colorspace</comment>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="400"/>
        <source>Grayscale</source>
        <comment>Colorspace</comment>
        <translation>Graustufen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="401"/>
        <source>Duotone</source>
        <comment>Colorspace</comment>
        <translation>Duplex</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="403"/>
        <source>Unknown</source>
        <comment>Colorspace (Unknown)</comment>
        <translation>Unbekannt</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="430"/>
        <source>PostScript</source>
        <translation>PostScript</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="439"/>
        <source>PostScript Level 1</source>
        <translation>PostScript Level 1</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="441"/>
        <source>PostScript Level 2</source>
        <translation>PostScript Level 2</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="443"/>
        <source>PostScript Level 3</source>
        <translation>PostScript Level 3</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="445"/>
        <source>Windows GDI</source>
        <translation>Windows GDI</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="295"/>
        <source>Text Frame</source>
        <translation>Textrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="296"/>
        <source>Image Frame</source>
        <translation>Bildrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="297"/>
        <source>Line</source>
        <translation>Linie</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="298"/>
        <source>Polygon</source>
        <translation>Polygon</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="299"/>
        <source>Polyline</source>
        <translation>Polylinie</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="300"/>
        <source>Text on a Path</source>
        <translation>Text auf einem Pfad</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="309"/>
        <source>Multiple</source>
        <comment>Multiple frame types</comment>
        <translation>Verschiedene</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="310"/>
        <source>PDF Push Button</source>
        <translation>PDF-Schaltfläche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="312"/>
        <source>PDF Text Field</source>
        <translation>PDF-Textfeld</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="313"/>
        <source>PDF Check Box</source>
        <translation>PDF-Checkbox</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="314"/>
        <source>PDF Combo Box</source>
        <translation>PDF-Combobox</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="315"/>
        <source>PDF List Box</source>
        <translation>PDF-Listbox</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="316"/>
        <source>PDF Text Annotation</source>
        <translation>PDF-Anmerkung</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="317"/>
        <source>PDF Link Annotation</source>
        <translation>PDF-Link</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="301"/>
        <source>Render Frame</source>
        <translation>Renderrahmen</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="371"/>
        <source>Default Paragraph Style</source>
        <translation>Standard-Absatzstil</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="372"/>
        <source>Default Character Style</source>
        <translation>Standard-Zeichenstil</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="373"/>
        <source>Default Line Style</source>
        <translation>Standard-Linienstil</translation>
    </message>
</context>
<context>
    <name>ContextMenu</name>
    <message>
        <location filename="../../scribus/ui/contextmenu.cpp" line="279"/>
        <source>Preview Settings</source>
        <translation>Vorschaumodus</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/contextmenu.cpp" line="535"/>
        <source>Paste File...</source>
        <translation>Dateien einfügen ...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/contextmenu.cpp" line="569"/>
        <source>Delete Page</source>
        <translation>Seite löschen</translation>
    </message>
    <message>
        <source>Paste Image from Clipboard</source>
        <translation type="obsolete">Bild aus der Zwischenablage einfügen</translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageBase</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="16"/>
        <source>Convert Page to Master Page</source>
        <translation>In Musterseite umwandeln</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="24"/>
        <source>Name:</source>
        <translation>Name:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="39"/>
        <source>Copy Applied Master Page Items</source>
        <translation>Objekte auf der angewandten Musterseite kopieren</translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageDialog</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpagedialog.cpp" line="29"/>
        <source>New Master Page %1</source>
        <translation>Neue Musterseite %1</translation>
    </message>
</context>
<context>
    <name>Cpalette</name>
    <message>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <source>Horizontal Gradient</source>
        <translation type="obsolete">Waagrechter Verlauf</translation>
    </message>
    <message>
        <source>Vertical Gradient</source>
        <translation type="obsolete">Senkrechter Verlauf</translation>
    </message>
    <message>
        <source>Diagonal Gradient</source>
        <translation type="obsolete">Diagonaler Verlauf</translation>
    </message>
    <message>
        <source>Cross Diagonal Gradient</source>
        <translation type="obsolete">Umgekehrt diagonaler Verlauf</translation>
    </message>
    <message>
        <source>Radial Gradient</source>
        <translation type="obsolete">Radialer Verlauf</translation>
    </message>
    <message>
        <source>Opacity:</source>
        <translation type="obsolete">Deckkraft:</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <source>Shade:</source>
        <translation type="obsolete">Tonwert:</translation>
    </message>
    <message>
        <source>Edit Line Color Properties</source>
        <translation type="obsolete">Linienfarbe bearbeiten</translation>
    </message>
    <message>
        <source>Edit Fill Color Properties</source>
        <translation type="obsolete">Füllfarbe bearbeiten</translation>
    </message>
    <message>
        <source>Saturation of color</source>
        <translation type="obsolete">Tonwert der Farbe</translation>
    </message>
    <message>
        <source>Normal or gradient fill method</source>
        <translation type="obsolete">Füllmethode</translation>
    </message>
    <message>
        <source>Set the transparency for the color selected</source>
        <translation type="obsolete">Transparenz für Farbe auswählen</translation>
    </message>
    <message>
        <source>Free linear Gradient</source>
        <translation type="obsolete">Benutzerdefinierter linearer Verlauf</translation>
    </message>
    <message>
        <source>X1:</source>
        <translation type="obsolete">X1:</translation>
    </message>
    <message>
        <source>Y1:</source>
        <translation type="obsolete">Y1:</translation>
    </message>
    <message>
        <source> pt</source>
        <translation type="obsolete">pt</translation>
    </message>
    <message>
        <source>X2:</source>
        <translation type="obsolete">X2:</translation>
    </message>
    <message>
        <source>Y2:</source>
        <translation type="obsolete">Y2:</translation>
    </message>
    <message>
        <source>Free radial Gradient</source>
        <translation type="obsolete">Benutzerdefinierter radialer Verlauf</translation>
    </message>
    <message>
        <source>Move Vector</source>
        <translation type="obsolete">Vektor verschieben</translation>
    </message>
    <message>
        <source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
        <translation type="obsolete">Verschieben Sie den Anfang des Verlaufsvektors, indem Sie die linke Maustaste gedrückt halten, und den Endwert des Vektors mit der rechten Maustaste</translation>
    </message>
    <message>
        <source>Transparency Settings</source>
        <translation type="obsolete">Transparenzeinstellungen</translation>
    </message>
    <message>
        <source>Blend Mode:</source>
        <translation type="obsolete">Modus:</translation>
    </message>
    <message>
        <source>Darken</source>
        <translation type="obsolete">Abdunkeln</translation>
    </message>
    <message>
        <source>Lighten</source>
        <translation type="obsolete">Aufhellen</translation>
    </message>
    <message>
        <source>Multiply</source>
        <translation type="obsolete">Multiplizieren</translation>
    </message>
    <message>
        <source>Screen</source>
        <translation type="obsolete">Negativ multiplizieren</translation>
    </message>
    <message>
        <source>Overlay</source>
        <translation type="obsolete">Ineinander kopieren</translation>
    </message>
    <message>
        <source>Hard Light</source>
        <translation type="obsolete">Hartes Licht</translation>
    </message>
    <message>
        <source>Soft Light</source>
        <translation type="obsolete">Weiches Licht</translation>
    </message>
    <message>
        <source>Difference</source>
        <translation type="obsolete">Differenz</translation>
    </message>
    <message>
        <source>Color Dodge</source>
        <translation type="obsolete">Farbig abwedeln</translation>
    </message>
    <message>
        <source>Color Burn</source>
        <translation type="obsolete">Farbig nachbelichten</translation>
    </message>
    <message>
        <source>Hue</source>
        <translation type="obsolete">Farbton</translation>
    </message>
    <message>
        <source>Saturation</source>
        <translation type="obsolete">Sättigung</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Farbe</translation>
    </message>
    <message>
        <source>Luminosity</source>
        <translation type="obsolete">Luminanz</translation>
    </message>
    <message>
        <source>Offsets</source>
        <translation type="obsolete">Abstände</translation>
    </message>
    <message>
        <source>X:</source>
        <translation type="obsolete">X:</translation>
    </message>
    <message>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <source>Scaling</source>
        <translation type="obsolete">Skalierung</translation>
    </message>
    <message>
        <source>X-Scale:</source>
        <translation type="obsolete">X-Grösse:</translation>
    </message>
    <message>
        <source>Y-Scale:</source>
        <translation type="obsolete">Y-Grösse:</translation>
    </message>
    <message>
        <source>Rotation</source>
        <translation type="obsolete">Rotation</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Winkel</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="412"/>
        <location filename="../../scribus/ui/cpalette.cpp" line="414"/>
        <source>Pattern</source>
        <translation>Füllmuster</translation>
    </message>
    <message>
        <source>Exclusion</source>
        <translation type="obsolete">Ausschluss</translation>
    </message>
    <message>
        <source>Display only used Colors</source>
        <translation type="obsolete">Nur verwendete Farben anzeigen</translation>
    </message>
    <message>
        <source>Display all colors from the document color list, or only the already used colors</source>
        <translation type="obsolete">Zeige alle im Dokumente gespeicherten Farben an oder nur solche, die tatsächlich benutzt werden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="79"/>
        <location filename="../../scribus/ui/cpalette.cpp" line="93"/>
        <source>Solid</source>
        <translation>Durchgehend</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="80"/>
        <location filename="../../scribus/ui/cpalette.cpp" line="94"/>
        <source>Gradient</source>
        <translation>Verlauf</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="81"/>
        <source>Hatch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="654"/>
        <location filename="../../scribus/ui/cpalette.cpp" line="657"/>
        <source>Custom</source>
        <translation>Benutzerdefiniert</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cpalette.cpp" line="1275"/>
        <source>Create Mesh</source>
        <translation>Verlaufsgitter erzeugen</translation>
    </message>
</context>
<context>
    <name>CreateMode</name>
    <message>
        <location filename="../../scribus/canvasmode_create.cpp" line="838"/>
        <source>3DAnnot</source>
        <translation>3DAnnot</translation>
    </message>
</context>
<context>
    <name>CreateRange</name>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="14"/>
        <source>Create Range</source>
        <translation>Seitenfolge erstellen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="34"/>
        <source>Number of Pages in Document:</source>
        <translation>Anzahl der Seiten im Dokument:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="44"/>
        <source>Doc Page Range</source>
        <translation>Seitenfolge im Dokument</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="92"/>
        <source>Basic Range Selection</source>
        <translation>Grundeinstellungen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="104"/>
        <source>Range of Pages</source>
        <translation>Seitenfolge</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="116"/>
        <source>De&amp;lete</source>
        <translation>Lö&amp;schen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="119"/>
        <source>Alt+L</source>
        <translation>Alt*L</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="142"/>
        <source>Move &amp;Down</source>
        <translation>Nach &amp;unten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="145"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="152"/>
        <source>Move &amp;Up</source>
        <translation>Nach &amp;oben</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="155"/>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="174"/>
        <source>Add a Range of Pages</source>
        <translation>Seitenfolge hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="186"/>
        <source>Consecutive Pages</source>
        <translation>Aufeinanderfolgende Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="196"/>
        <source>Even Pages</source>
        <translation>Gerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="203"/>
        <source>From:</source>
        <translation>Von:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="235"/>
        <source>To:</source>
        <translation>bis:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="269"/>
        <source>&amp;Add To Range</source>
        <translation>&amp;Zur Folge hinzufügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="272"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="297"/>
        <source>Odd Pages</source>
        <translation>Ungerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="307"/>
        <source>Comma Separated List</source>
        <translation>Kommaseparierte Liste</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="318"/>
        <source>Advanced Reordering</source>
        <translation>Erweiterte Anordnung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="362"/>
        <source>Page Order</source>
        <translation>Anordnung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="372"/>
        <source>Sample Page Order:</source>
        <translation>Beispielanordnung:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="401"/>
        <source>Page Group Size:</source>
        <translation>Grösse der Seitengruppe:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="439"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="442"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="449"/>
        <source>&amp;Cancel</source>
        <translation>A&amp;bbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="452"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
</context>
<context>
    <name>CreateRangeBase</name>
    <message>
        <source>Create Range</source>
        <translation type="obsolete">Seitenfolge erstellen</translation>
    </message>
    <message>
        <source>Number of Pages in Document:</source>
        <translation type="obsolete">Anzahl der Seiten im Dokument:</translation>
    </message>
    <message>
        <source>Doc Page Range</source>
        <translation type="obsolete">Seitenfolge im Dokument</translation>
    </message>
    <message>
        <source>Basic Range Selection</source>
        <translation type="obsolete">Grundeinstellungen</translation>
    </message>
    <message>
        <source>Add a Range of Pages</source>
        <translation type="obsolete">Seitenfolge hinzufügen</translation>
    </message>
    <message>
        <source>Consecutive Pages</source>
        <translation type="obsolete">Aufeinanderfolgende Seiten</translation>
    </message>
    <message>
        <source>From:</source>
        <translation type="obsolete">Von:</translation>
    </message>
    <message>
        <source>To:</source>
        <translation type="obsolete">bis:</translation>
    </message>
    <message>
        <source>Comma Separated List</source>
        <translation type="obsolete">Kommaseparierte Liste</translation>
    </message>
    <message>
        <source>Even Pages</source>
        <translation type="obsolete">Gerade Seiten</translation>
    </message>
    <message>
        <source>Odd Pages</source>
        <translation type="obsolete">Ungerade Seiten</translation>
    </message>
    <message>
        <source>&amp;Add To Range</source>
        <translation type="obsolete">&amp;Zur Folge hinzufügen</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>Range of Pages</source>
        <translation type="obsolete">Seitenfolge</translation>
    </message>
    <message>
        <source>Move &amp;Up</source>
        <translation type="obsolete">Nach &amp;oben</translation>
    </message>
    <message>
        <source>Alt+U</source>
        <translation type="obsolete">Alt+U</translation>
    </message>
    <message>
        <source>Move &amp;Down</source>
        <translation type="obsolete">Nach &amp;unten</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>De&amp;lete</source>
        <translation type="obsolete">Lö&amp;schen</translation>
    </message>
    <message>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <source>Advanced Reordering</source>
        <translation type="obsolete">Erweiterte Anordnung</translation>
    </message>
    <message>
        <source>Page Group Size:</source>
        <translation type="obsolete">Grösse der Seitengruppe:</translation>
    </message>
    <message>
        <source>Sample Page Order:</source>
        <translation type="obsolete">Beispielanordnung:</translation>
    </message>
    <message>
        <source>Page Order</source>
        <translation type="obsolete">Anordnung</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">A&amp;bbrechen</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>CsvDialog</name>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="27"/>
        <source>CSV Importer Options</source>
        <translation>Optionen für CSV-Importer</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="37"/>
        <source>Field delimiter:</source>
        <translation>Feldtrenner:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="44"/>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="89"/>
        <source>(TAB)</source>
        <translation>(TAB)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="53"/>
        <source>Value delimiter:</source>
        <translation>Texttrenner:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="68"/>
        <source>First row is a header</source>
        <translation>Erste Zeile ist Kopfzeile</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="76"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="79"/>
        <source>Cancel</source>
        <translation>Abbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
        <source>None</source>
        <comment>delimiter</comment>
        <translation>Keiner</translation>
    </message>
</context>
<context>
    <name>CupsOptions</name>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="53"/>
        <source>Printer Options</source>
        <translation>Druckereinstellungen (CUPS)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="64"/>
        <source>Option</source>
        <translation>Einstellung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="65"/>
        <source>Value</source>
        <translation>Wert</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="134"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="144"/>
        <source>Page Set</source>
        <translation>Welche Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="141"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="148"/>
        <source>All Pages</source>
        <translation>Alle Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="142"/>
        <source>Even Pages only</source>
        <translation>Nur gerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="143"/>
        <source>Odd Pages only</source>
        <translation>Nur ungerade Seiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="151"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="161"/>
        <source>Mirror</source>
        <translation>Spiegeln</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="168"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="178"/>
        <source>Orientation</source>
        <translation>Ausrichtung</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="175"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="182"/>
        <source>Portrait</source>
        <translation>Hochformat</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="176"/>
        <source>Landscape</source>
        <translation>Querformat</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="185"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="198"/>
        <source>N-Up Printing</source>
        <translation>Seiten zusammenfassen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="192"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="202"/>
        <source>Page per Sheet</source>
        <translation>Seite pro Blatt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="193"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="194"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="195"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="196"/>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="197"/>
        <source>Pages per Sheet</source>
        <translation>Seiten pro Blatt</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/cupsoptions.cpp" line="225"/>
        <source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
        <translation>Dieser Dialog enthält verschiedene Optionen für das Drucken mit CUPS. Die exakten Optionen hängen von Ihrem Drucker ab. Sie können überprüfen, ob CUPS aktiviert ist, wenn Sie Hilfe &gt; Über aufrufen. Suchen Sie nach den Zeichen C-C-T-F. Diese bedeuten C=CUPS C=littlecms T=TIFF. Fehlende Bibliotheken werden durch * angezeigt</translation>
    </message>
</context>
<context>
    <name>CurveWidget</name>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="406"/>
        <source>Open</source>
        <translation>Öffnen</translation>
    </message>
    <message>
        <source>Curve Files (*.scu);;All Files (*)</source>
        <translation type="obsolete">Kurvendateien (*.scu);;Alle Dateien (*)</translation>
    </message>
    <message>
        <source>Curve Files (*.scu *.SCU);;All Files (*)</source>
        <translation type="obsolete">Kurven (*.scu *.SCU);;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="444"/>
        <source>Save as</source>
        <translation>Speichern unter</translation>
    </message>
    <message>
        <source>Curve Files (*.scu *.scu);;All Files (*)</source>
        <translation type="obsolete">Kurven (*.scu *.SCU);;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="406"/>
        <location filename="../../scribus/ui/curvewidget.cpp" line="444"/>
        <source>Curve Files &quot;*.scu&quot; (*.scu *.SCU);;All Files (*)</source>
        <translation>Kurvendateien (*.scu *.SCU);;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="478"/>
        <source>Cannot write the file: 
%1</source>
        <translation>Die Datei %1 kann nicht geschrieben werden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="504"/>
        <source>Inverts the curve</source>
        <translation>Invertiert die Kurve</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="505"/>
        <source>Resets the curve</source>
        <translation>Setzt die Kurve zurück</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="506"/>
        <source>Switches between linear and cubic interpolation of the curve</source>
        <translation>Wechselt zwischen linearer und kubischer Interpolation der Kurve</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="507"/>
        <source>Loads a curve</source>
        <translation>Lädt eine Kurve</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/curvewidget.cpp" line="508"/>
        <source>Saves this curve</source>
        <translation>Speichert diese Kurve</translation>
    </message>
</context>
<context>
    <name>CustomFDialog</name>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="409"/>
        <source>Encoding:</source>
        <translation>Kodierung:</translation>
    </message>
    <message>
        <source>Moves to your Document Directory.
This can be set in the Preferences.</source>
        <translation type="obsolete">Führt zum Dokumentenverzeichnis.
Dieses können Sie in unter Datei - Allgemeine Einstellungen festlegen.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="349"/>
        <location filename="../../scribus/ui/customfdialog.cpp" line="379"/>
        <source>&amp;Compress File</source>
        <translation>Datei &amp;komprimieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="358"/>
        <source>&amp;Include Fonts</source>
        <translation>Schriften ein&amp;betten</translation>
    </message>
    <message>
        <source>&amp;Include ICC Profiles</source>
        <translation type="obsolete">ICC-Profile &amp;einbetten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="326"/>
        <source>Show Preview</source>
        <translation>Vorschau anzeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="360"/>
        <source>&amp;Include Color Profiles</source>
        <translation>&amp;Farbprofile einbeziehen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="327"/>
        <source>Show a preview and information for the selected file</source>
        <translation>Vorschau und andere Informationen über die gewählte Datei zeigen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="396"/>
        <source>Compress the Scribus document on save</source>
        <translation>Die Scribus-Datei beim Speichern komprimieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="398"/>
        <source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
        <translation>Schliesst verwendete Schriften ein, wenn Dateien für die Ausgabe gesammelt werden. Beachten Sie die Lizenzinformationen aller Schriftdateien, die Sie weitergeben möchten.</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/customfdialog.cpp" line="400"/>
        <source>Include color profiles when collecting files for the document</source>
        <translation>Schliesst verwendete Farbprofile ein, wenn Dateien für die Ausgabe gesammelt werden </translation>
    </message>
</context>
<context>
    <name>CvgPlug</name>
    <message>
        <location filename="../../scribus/plugins/import/cvg/importcvg.cpp" line="144"/>
        <source>Importing: %1</source>
        <translation>Importiere: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/cvg/importcvg.cpp" line="147"/>
        <source>Analyzing File:</source>
        <translation>Analysieren der Datei:</translation>
    </message>
    <message>
        <source>Group%1</source>
        <translation type="obsolete">Gruppe%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/cvg/importcvg.cpp" line="345"/>
        <source>Generating Items</source>
        <translation>Objekte werden erstellt</translation>
    </message>
</context>
<context>
    <name>DashEditor</name>
    <message>
        <location filename="../../scribus/ui/dasheditor.cpp" line="372"/>
        <source>Value:</source>
        <translation>Wert:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/dasheditor.cpp" line="373"/>
        <source>Offset:</source>
        <translation>Versatz:</translation>
    </message>
</context>
<context>
    <name>DeferredTask</name>
    <message>
        <location filename="../../scribus/deferredtask.cpp" line="82"/>
        <source>Cancelled by user</source>
        <translation>Vom Anwender beendet</translation>
    </message>
</context>
<context>
    <name>DelColor</name>
    <message>
        <location filename="../../scribus/ui/dcolor.cpp" line="28"/>
        <source>Delete Color</source>
        <translation>Farbe löschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/dcolor.cpp" line="36"/>
        <source>Delete Color:</source>
        <translation>Farbe löschen:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/dcolor.cpp" line="45"/>
        <source>Replace With:</source>
        <translation>Ersetzen durch:</translation>
    </message>
</context>
<context>
    <name>DelPages</name>
    <message>
        <location filename="../../scribus/ui/delpages.cpp" line="17"/>
        <source>Delete Pages</source>
        <translation>Seiten löschen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/delpages.cpp" line="37"/>
        <source>to:</source>
        <translation>bis:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/delpages.cpp" line="26"/>
        <source>Delete From:</source>
        <translation>Löschen von:</translation>
    </message>
</context>
<context>
    <name>DelStyle</name>
    <message>
        <source>Delete Style</source>
        <translation type="obsolete">Stil löschen</translation>
    </message>
    <message>
        <source>Delete Style:</source>
        <translation type="obsolete">Lösche Stil:</translation>
    </message>
    <message>
        <source>Replace With:</source>
        <translation type="obsolete">Ersetzen durch:</translation>
    </message>
    <message>
        <source>No Style</source>
        <translation type="obsolete">Kein Stil</translation>
    </message>
</context>
<context>
    <name>DialogsAPI</name>
    <message>
        <location filename="../../scribus/plugins/scripter/api_dialogs.cpp" line="33"/>
        <source>Alert - Scribus</source>
        <translation>Warnung - Scribus</translation>
    </message>
</context>
<context>
    <name>DocIm</name>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="180"/>
        <source>Importing failed</source>
        <translation>Import fehlgeschlagen</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="181"/>
        <source>Importing Word document failed 
%1</source>
        <translation>Fehler beim Import des Word-Dokuments
%1</translation>
    </message>
</context>
<context>
    <name>DocInfos</name>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="30"/>
        <source>Document Information</source>
        <translation>Dokumentinformationen</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="39"/>
        <source>&amp;Title:</source>
        <translation>&amp;Titel:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="46"/>
        <source>&amp;Author:</source>
        <translation>&amp;Autor:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="53"/>
        <source>&amp;Subject:</source>
        <translation>T&amp;hema:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="61"/>
        <source>&amp;Keywords:</source>
        <translation>&amp;Stichwörter:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="69"/>
        <source>Descri&amp;ption:</source>
        <translation>Beschrei&amp;bung:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="82"/>
        <source>P&amp;ublisher:</source>
        <translation>&amp;Herausgeber:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="89"/>
        <source>&amp;Contributors:</source>
        <translation>&amp;Mitarbeiter:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="97"/>
        <source>Dat&amp;e:</source>
        <translation>&amp;Datum:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="104"/>
        <source>T&amp;ype:</source>
        <translation>&amp;Typ:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="111"/>
        <source>F&amp;ormat:</source>
        <translation>&amp;Format:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="118"/>
        <source>Identi&amp;fier:</source>
        <translation>&amp;Identifikation:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="125"/>
        <source>&amp;Source:</source>
        <translation>&amp;Quelle:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="132"/>
        <source>&amp;Language:</source>
        <translation>&amp;Sprache:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="139"/>
        <source>&amp;Relation:</source>
        <translation>&amp;Beziehung:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="146"/>
        <source>Co&amp;verage:</source>
        <translation>&amp;Gültigkeitsbereich:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="153"/>
        <source>Ri&amp;ghts:</source>
        <translation>&amp;Rechte:</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="161"/>
        <source>Further &amp;Information</source>
        <translation>Weitere &amp;Informationen</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="171"/>
        <source>A person or organisation responsible for making the document available</source>
        <translation>Eine Person oder Organisation, die für die Veröffentlichung des Dokuments verantwortlich ist</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="172"/>
        <source>A person or organisation responsible for making contributions to the content of the document</source>
        <translation>Eine Person oder Organisation, die an der Erstellung des Dokuments beteiligt war</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="173"/>
        <source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
        <translation>Ein Datum, das mit der Entstehung des Dokuments verbunden ist,
nach ISO 8601 im Format JJJJ-MM-DD </translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="174"/>
        <source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
        <translation>Die Gattung oder der Typ des Dokuments, z. B. Kategorie, Funktion, Genre etc</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="176"/>
        <source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
        <translation>Eine eindeutige Referenz zu dem Dokument in einem gegebenen Kontext wie ISBN oder URI</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="179"/>
        <source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
        <translation>Eine Referenz zu einem ähnlichen Dokument. Hier kann eine formale 
Identifikation wie ISBN oder ein URI verwendet werden</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="180"/>
        <source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
        <translation>Der Geltungsbereich des Dokuments, wenn möglich mit Ort, Zeit und Gerichtsstand</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="181"/>
        <source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
        <translation>Informationen über rechtliche Aspekte des Dokumenteninhalts, 
etwa Urheberrechte, Patente oder Warenzeichen</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="177"/>
        <source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
        <translation>Eine Referenz zu einem Dokument, von dem sich das aktuelle Dokument ableitet, z.B. ISBN oder URI</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="160"/>
        <source>Documen&amp;t</source>
        <translation>Dokume&amp;nt</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="167"/>
        <source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>Die Person oder Organisation, die hauptsächlich für den Inhalt des Dokuments verantwortlich ist. Dieses Feld kann sowohl in das Scribus-Dokument als auch in die Metadaten einer PDF-Datei eingebettet werden</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="168"/>
        <source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>Der Titel oder die Bezeichnung des Dokuments. 
Dieses Feld kann sowohl in das Scribus-Dokument als auch 
in die Meta-Daten einer PDF-Datei eingebettet werden</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="169"/>
        <source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation>Ein Abriss des Inhalts.
Hier kann eine kurze Beschreibung oder Zusammenfassung stehen. 
Sie wird beim Export in die PDF-Datei eingebettet</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="170"/>
        <source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation>Kurze Beschreibung des Inhalts.
Der Inhalt dieses Feldes wird in der PDF-Datei gespeichert und hilft Ihnen, 
PDF-Dateien zu indexieren und wiederzufinden</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="175"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation>Die physische oder digitale Veröffentlichungsform des Dokuments. 
Abmessung und Medientyp können hier notiert werden.
Die Verwendung der RFCs 2045 und 2046 für MIME-Typen kann hier nützlich sein</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="178"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation>Die Sprache, in welcher der Inhalt des Dokuments geschrieben ist, 
normalerweise ein ISO-639-Sprachcode, optional ergänzt durch 
einen Bindestrich und den ISO-3166 Ländercode, wie z. B. en-GB oder fr-CH</translation>
    </message>
</context>
<context>
    <name>DocSections</name>
    <message>
        <source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
        <translation type="obsolete">Fügt einen Abschnitt für die Seitenzahl in das Dokument ein. Der neue Abschnitt wird unter dem aktuellen hinzugefügt.</translation>
    </message>
    <message>
        <source>Delete the currently selected section.</source>
        <translation type="obsolete">Markierten Abschnitt löschen.</translation>
    </message>
    <message>
        <source>1, 2, 3, ...</source>
        <translation type="obsolete">1, 2, 3, ...</translation>
    </message>
    <message>
        <source>i, ii, iii, ...</source>
        <translation type="obsolete">i, ii, iii, ...</translation>
    </message>
    <message>
        <source>I, II, III, ...</source>
        <translation type="obsolete">I, II, III, ...</translation>
    </message>
    <message>
        <source>a, b, c, ...</source>
        <translation type="obsolete">a, b, c, ...</translation>
    </message>
    <message>
        <source>A, B, C, ...</source>
        <translation type="obsolete">A, B, C, ...</translation>
    </message>
    <message>
        <source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
        <translation type="obsolete">&lt;b&gt;Name:&lt;/b&gt; Optionale Bezeichnung für den Abschnitt, z. B. Index.&lt;br/&gt;&lt;b&gt;Sichtbar:&lt;/b&gt; Entscheiden Sie, ob die Seitennummern angezeigt werden sollen.&lt;br/&gt;&lt;b&gt;Von:&lt;/b&gt; Der Seitenindex für diesen Abschnitt, mit dem die Zählung beginnen soll.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt;Der Seitenindex für diesen Abschnitt, mit dem die Zählung enden soll.&lt;br/&gt;&lt;b&gt;Stil:&lt;/b&gt; Wählen Sie den Numerierungsstil aus.&lt;br/&gt;&lt;b&gt;Beginn:&lt;/b&gt; Die Seitennummer, ab der die Zählung beginnen soll. Wenn Sie beispielsweise hier 2 eintragen und als Stil a, b, c wählen, wird mit b angefangen.</translation>
    </message>
    <message>
        <source>Page Number Out Of Bounds</source>
        <translation type="obsolete">Seitenzahl ausserhalb des gültigen Bereichs</translation>
    </message>
    <message>
        <source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
        <translation type="obsolete">Der Wert, den Sie eingegeben haben, liegt ausserhalb des gültigen Bereichs (%1-%2).</translation>
    </message>
    <message>
        <source>Document Sections</source>
        <translation type="obsolete">Dokumentabschnitte</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;Hinzufügen</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Löschen</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">Name</translation>
    </message>
    <message>
        <source>Shown</source>
        <translation type="obsolete">Sichtbar</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">von</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">bis</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Stil</translation>
    </message>
    <message>
        <source>Start</source>
        <translation type="obsolete">Beginn</translation>
    </message>
</context>
<context>
    <name>DocSectionsBase</name>
    <message>
        <source>Document Sections</source>
        <translation type="obsolete">Dokumentabschnitte</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">Name</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">von</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">bis</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Stil</translation>
    </message>
    <message>
        <source>Start</source>
        <translation type="obsolete">Beginn</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;Hinzufügen</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+H</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Löschen</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <source>Shown</source>
        <translation type="obsolete">Sichtbar</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributes</name>
    <message>
        <source>Relates To</source>
        <translation type="obsolete">Verweist auf</translation>
    </message>
    <message>
        <source>Is Parent Of</source>
        <translation type="obsolete">Ist Elternobjekt von</translation>
    </message>
    <message>
        <source>Is Child Of</source>
        <translation type="obsolete">Ist Kindobjekt von</translation>
    </message>
    <message>
        <source>Text Frames</source>
        <translation type="obsolete">Textrahmen</translation>
    </message>
    <message>
        <source>Image Frames</source>
        <translation type="obsolete">Bildrahmen</translation>
    </message>
    <message>
        <source>Boolean</source>
        <translation type="obsolete">Boolsch</translation>
    </message>
    <message>
        <source>Integer</source>
        <translation type="obsolete">Integer</translation>
    </message>
    <message>
        <source>String</source>
        <translation type="obsolete">String</translation>
    </message>
    <message>
        <source>None</source>
        <comment>relationship</comment>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>None</source>
        <comment>auto add</comment>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>None</source>
        <comment>types</comment>
        <translation type="obsolete">Keine</translation>
    </message>
    <message>
        <source>Real Number</source>
        <translation type="obsolete">Reale Zahl</translation>
    </message>
    <message>
        <source>Document Item Attributes</source>
        <translation type="obsolete">Eigenschaften des Dokumentobjekts</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;Hinzufügen</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;Kopieren</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Löschen</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;Entfernen</translation>
    </message>
    <message>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">Name</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Typ</translation>
    </message>
    <message>
        <source>Value</source>
        <translation type="obsolete">Wert</translation>
    </message>
    <message>
        <source>Parameter</source>
        <translation type="obsolete">Parameter</translation>
    </message>
    <message>
        <source>Relationship</source>
        <translation type="obsolete">Beziehung</translation>
    </message>
    <message>
        <source>Relationship To</source>
        <translation type="obsolete">Beziehung zu</translation>
    </message>
    <message>
        <source>Auto Add To</source>
        <translation type="obsolete">Automatisch hinzufügen zu</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributesBase</name>
    <message>
        <source>Document Item Attributes</source>
        <translation type="obsolete">Eigenschaften des Dokumentobjekts</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">Name</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Typ</translation>
    </message>
    <message>
        <source>Value</source>
        <translation type="obsolete">Wert</translation>
    </message>
    <message>
        <source>Parameter</source>
        <translation type="obsolete">Parameter</translation>
    </message>
    <message>
        <source>Relationship</source>
        <translation type="obsolete">Beziehung</translation>
    </message>
    <message>
        <source>Relationship To</source>
        <translation type="obsolete">Beziehung zu</translation>
    </message>
    <message>
        <source>Auto Add To</source>
        <translation type="obsolete">Automatisch hinzufügen zu</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;Hinzufügen</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;Kopieren</translation>
    </message>
    <message>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Löschen</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;Entfernen</translation>
    </message>
    <message>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
</context>
<context>
    <name>DrwPlug</name>
    <message>
        <location filename="../../scribus/plugins/import/drw/importdrw.cpp" line="1230"/>
        <source>Group%1</source>
        <translation>Gruppe%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/drw/importdrw.cpp" line="160"/>
        <source>Importing: %1</source>
        <translation>Importiere: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/drw/importdrw.cpp" line="163"/>
        <source>Analyzing File:</source>
        <translation>Analysieren der Datei:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/drw/importdrw.cpp" line="372"/>
        <source>Generating Items</source>
        <translation>Objekte werden erstellt</translation>
    </message>
</context>
<context>
    <name>EPSPlug</name>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="423"/>
        <source>Importing File:
%1
failed!</source>
        <translation>Fehler beim Importieren
der Datei
%1!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="424"/>
        <source>Fatal Error</source>
        <translation>Fataler Fehler</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="763"/>
        <source>Error</source>
        <translation>Fehler</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="82"/>
        <source>Analyzing PostScript:</source>
        <translation>PostScript wird analysiert:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="429"/>
        <source>Generating Items</source>
        <translation>Objekte werden erstellt</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="762"/>
        <source>Converting of %1 images failed!</source>
        <translation>Fehler beim Konvertieren von %1 Bildern!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="636"/>
        <source>Group%1</source>
        <translation>Gruppe%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/import/ps/importps.cpp" line="79"/>
        <source>Importing: %1</source>
        <translation>Importiere: %1</translation>
    </message>
</context>
<context>
    <name>EditStyle</name>
    <message>
        <source>Edit Style</source>
        <translation type="obsolete">Stilvorlage bearbeiten</translation>
    </message>
    <message>
        <source>Character</source>
        <translation type="obsolete">Zeichen</translation>
    </message>
    <message>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <source>Line Spacing</source>
        <translation type="obsolete">Zeilenabstand</translation>
    </message>
    <message>
        <source>Name of your paragraph style</source>
        <translation type="obsolete">Name des Absatzstils</translation>
    </message>
    <message>
        <source>Font of selected text or object</source>
        <translation type="obsolete">Schrift des gewählten Textes oder des Objekts</translation>
    </message>
    <message>
        <source>Font Size</source>
        <translation type="obsolete">Schriftgrösse</translation>
    </message>
    <message>
        <source>Color of text fill</source>
        <translation type="obsolete">Textfarbe</translation>
    </message>
    <message>
        <source>Color of text stroke</source>
        <translation type="obsolete">Textumrissfarbe</translation>
    </message>
    <message>
        <source>Determines the overall height, in line numbers, of the Drop Caps</source>
        <translation type="obsolete">Legt die gesamte Höhe der Initiale in Zeilennummern fest</translation>
    </message>
    <message>
        <source>Spacing above the paragraph</source>
        <translation type="obsolete">Abstand über dem Absatz</translation>
    </message>
    <message>
        <source>Spacing below the paragraph</source>
        <translation type="obsolete">Abstand unter dem Absatz</translation>
    </message>
    <message>
        <source>Tabulators and Indentation</source>
        <translation type="obsolete">Tabulatoren und Einzüge</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;Name:</translation>
    </message>
    <message>
        <source>&amp;Lines:</source>
        <translation type="obsolete">&amp;Zeilen:</translation>
    </message>
    <message>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <source>Distances</source>
        <translation type="obsolete">Abstände</translation>
    </message>
    <message>
        <source>Fixed Linespacing</source>
        <translation type="obsolete">Fester Zeilenabstand</translation>
    </message>
    <message>
        <source>Automatic Linespacing</source>
        <translation type="obsolete">Automatischer Zeilenabstand</translation>
    </message>
    <message>
        <source>Align to Baseline Grid</source>
        <translation type="obsolete">Am Grundlinienraster ausrichten</translation>
    </message>
    <message>
        <source>Drop Caps</source>
        <translation type="obsolete">Initialen</translation>
    </message>
    <message>
        <source>Distance from Text:</source>
        <translation type="obsolete">Abstand vom Text:</translation>
    </message>
    <message>
        <source>Preview of the Paragraph Style</source>
        <translation type="obsolete">Vorschau des Absatzstils</translation>
    </message>
    <message>
        <source>Determines the gap between the DropCaps and the Text</source>
        <translation type="obsolete">Legt den Abstand zwischen der Initiale und dem Text fest</translation>
    </message>
    <message>
        <source>Toggles sample text of this paragraph style</source>
        <translation type="obsolete">Schaltet die Absatzvorschau an oder aus</translation>
    </message>
    <message>
        <source>Name of the style is not unique</source>
        <translation type="obsolete">Der Name des Stils ist nicht eindeutig</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Hintergrund</translation>
    </message>
    <message>
        <source>Manual Tracking</source>
        <translation type="obsolete">Zeichenabstand anpassen</translation>
    </message>
    <message>
        <source>Offset to baseline of characters</source>
        <translation type="obsolete">Abstand der Zeichen von der Grundlinie</translation>
    </message>
    <message>
        <source>Click to select the line spacing mode</source>
        <translation type="obsolete">Klicken Sie hier, um den Zeilenabstand zu ändern</translation>
    </message>
    <message>
        <source>Auto</source>
        <translation type="obsolete">Auto</translation>
    </message>
    <message>
        <source>Select for easier reading of light colored text styles</source>
        <translation type="obsolete">Wählen Sie einen dunkleren Hintergrund, um hellen Text besser zu erkennen</translation>
    </message>
</context>
<context>
    <name>EditToolBar</name>
    <message>
        <location filename="../../scribus/ui/edittoolbar.cpp" line="29"/>
        <source>Edit</source>
        <translation>Bearbeiten</translation>
    </message>
</context>
<context>
    <name>Editor</name>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="34"/>
        <source>Editor</source>
        <translation>Editor</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="40"/>
        <source>&amp;New</source>
        <translation>&amp;Neu</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="43"/>
        <source>&amp;Open...</source>
        <translation>Ö&amp;ffnen...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="45"/>
        <source>Save &amp;As...</source>
        <translation>Speichern &amp;unter...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="47"/>
        <source>&amp;Save and Exit</source>
        <translation>Speicher&amp;n und beenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="49"/>
        <source>&amp;Exit without Saving</source>
        <translation>Nicht speichern und &amp;beenden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="51"/>
        <source>&amp;Undo</source>
        <translation>&amp;Rückgängig</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="54"/>
        <source>&amp;Redo</source>
        <translation>Wieder&amp;herstellen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="56"/>
        <source>Cu&amp;t</source>
        <translation>&amp;Ausschneiden</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="59"/>
        <source>&amp;Copy</source>
        <translation>&amp;Kopieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="62"/>
        <source>&amp;Paste</source>
        <translation>Einf&amp;ügen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="65"/>
        <source>C&amp;lear</source>
        <translation>&amp;Entfernen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="67"/>
        <source>&amp;Get Field Names</source>
        <translation>&amp;Feldnamen auslesen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="69"/>
        <source>&amp;File</source>
        <translation>&amp;Datei</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="76"/>
        <source>&amp;Edit</source>
        <translation>&amp;Bearbeiten</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="100"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="104"/>
        <source>Cancel</source>
        <translation type="unfinished">Abbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="132"/>
        <location filename="../../scribus/ui/editor.cpp" line="148"/>
        <source>JavaScripts (*.js);;All Files (*)</source>
        <translation>JavaScripts (*.js);;Alle Dateien (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="41"/>
        <source>Ctrl+N</source>
        <translation>Str+N</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="52"/>
        <source>Ctrl+Z</source>
        <translation>Strg+Z</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="57"/>
        <source>Ctrl+X</source>
        <translation>Strg+X</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="60"/>
        <source>Ctrl+C</source>
        <translation>Strg+C</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/editor.cpp" line="63"/>
        <source>Ctrl-V</source>
        <translation>Strg+V</translation>
    </message>
</context>
<context>
    <name>EffectsDialog</name>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="45"/>
        <source>Image Effects</source>
        <translation>Bildeffekte</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="87"/>
        <source>Options:</source>
        <translation>Optionen:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="104"/>
        <source>Color:</source>
        <translation>Farbe:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="115"/>
        <source>Shade:</source>
        <translation>Tonwert:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="131"/>
        <source>Brightness:</source>
        <translation>Helligkeit:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="153"/>
        <source>Contrast:</source>
        <translation>Kontrast:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="175"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="204"/>
        <source>Radius:</source>
        <translation>Radius:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="186"/>
        <source>Value:</source>
        <translation>Wert:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="222"/>
        <source>Posterize:</source>
        <translation>Posterisieren:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="461"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="478"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="506"/>
        <source>Available Effects</source>
        <translation>Verfügbare Effekte</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="465"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="547"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="796"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="858"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1313"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1435"/>
        <source>Blur</source>
        <translation>Verwischen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="466"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="532"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="781"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="852"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1264"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1413"/>
        <source>Brightness</source>
        <translation>Helligkeit</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="467"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="523"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="776"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="862"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="917"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1004"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1404"/>
        <source>Colorize</source>
        <translation>Farben ändern</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="471"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="537"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="786"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="854"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1280"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1419"/>
        <source>Contrast</source>
        <translation>Kontrast</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="472"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="518"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="771"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="850"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1000"/>
        <source>Grayscale</source>
        <translation>Graustufen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="474"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="513"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="766"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="848"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1002"/>
        <source>Invert</source>
        <translation>Invertieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="475"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="557"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="804"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="860"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1325"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1448"/>
        <source>Posterize</source>
        <translation>Posterisieren</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="476"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="542"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="791"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="856"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1296"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1425"/>
        <source>Sharpen</source>
        <translation>Schärfen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="488"/>
        <source>&gt;&gt;</source>
        <translation>&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="492"/>
        <source>&lt;&lt;</source>
        <translation>&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="503"/>
        <source>Effects in use</source>
        <translation>Verwendete Effekte</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="622"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="626"/>
        <source>Cancel</source>
        <translation>Abbrechen</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="241"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="291"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="357"/>
        <source>Color 1:</source>
        <translation>Farbe 1:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="262"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="311"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="377"/>
        <source>Color 2:</source>
        <translation>Farbe 2:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="331"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="397"/>
        <source>Color 3:</source>
        <translation>Farbe 3:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="417"/>
        <source>Color 4:</source>
        <translation>Farbe 4:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="468"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="562"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="809"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="873"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="917"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1021"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1454"/>
        <source>Duotone</source>
        <translation>Duplex</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="469"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="571"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="814"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="884"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="917"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1079"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1490"/>
        <source>Tritone</source>
        <translation>Triplex</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="470"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="580"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="819"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="895"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="917"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1160"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1541"/>
        <source>Quadtone</source>
        <translation>Quadruplex</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="473"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="589"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="824"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="906"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1341"/>
        <location filename="../../scribus/ui/effectsdialog.cpp" line="1607"/>
        <source>Curves</source>
        <translation>Kurven</translation>
    </message>
</context>
<context>
    <name>ExceptHookDialog</name>
    <message>
        <location filename="../../scribus/plugins/scripter/p