Subversion Repositories Scribus

Rev

Rev 10130 | Blame | Compare with Previous | Last modification | View Log | RSS feed

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1">
<context>
    <name></name>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="21"/>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation>getColorNames() -&gt; list

Devuelve una lista que contiene los nombres de todos los colores definidos 
en el documento. Si no hay abierto ningún documento, devulve una lista de 
los colores del documento por defecto.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddialog.h" line="22"/>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation>newDocDialog() -&gt; bool

Muestra el diálogo de &quot;Nuevo Documento&quot;. Crea un nuevo documento si 
el usuario presiona aceptar. No lo crea si presiona cancelar. Devuelve true 
si se crea un nuevo documento.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumber = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="obsolete">newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

Crea un nuevo documento y devuelve true si tiene éxito. Los parámetros tienen 
el siguiente significado:

    size = Un par (ancho, alto) que describe el tamaño del documento. Se 
    pueden usar constantes predefinidas llamadas PAPER_&lt;tipo_de_papel&gt; 
    p. ej. PAPER_A4, etc.

    margins = Un vector (izquierda, derecha, arriba, abajo) que describe 
    los márgenes del documento

    orientation = la orientación de la página - constantes PORTRAIT (vertical), 
    LANDSCAPE (apasaido)

   firstPageNumber = es el número de la primera página del documento 
    usado para la numeración de páginas. Aunque normalmente será 1, es útil 
    para tener números mayores si se crea un documento en varias partes.

    unit: este valor establece las unidades de medida usadas por el 
    documento. Usa una constante predefinida para esto, una de: 
    UNIT_INCHES (pulgadas), UNIT_MILLIMETERS (milímetros), 
    UNIT_PICAS (picas), UNIT_POINTS (puntos).

    facingPages = FACINGPAGES (páginas enfrentadas), 
    NOFACINGPAGES (páginas no enfrentadas)

    firstSideLeft = FIRSTPAGELEFT (primera página a la izquierda), 
    FIRSTPAGERIGHT (primera página a la derecha)

Los valores para la anchura, altura y los márgenes están expresados en la unidad 
dada para el documento. Las constantes PAPER_* están expresadas en puntos. Si 
tu documento no está en puntos, asegurate de tenerlo en cuenta. 

ejemplo: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS, 
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="21"/>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getFillColor([&quot;name&quot;]) -&gt; string

Devuleve el nombre del color de relleno del objeto con nombre&quot;name&quot;. 
Si no se pasa un nombre se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="23"/>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation>moveObject(dx, dy [, &quot;name&quot;])

Mueve el objeto de nombre &quot;name&quot; dx y dy unidades, relativo a su posición 
actual. Las distancias se deben expresar en las unidades actuales del 
documento (ver constantes UNIT). Si no se pasa un nombre se usa el objeto 
que esté seleccionado. Si el objeto &quot;name&quot; pertenece a un grupo, se 
mueve el grupo entero.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="24"/>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation>setRedraw(bool)

Desactiva el redibujado de la página si bool = False, de otro modo, se activa 
el redibujado. Este cambio permanecerá incluso después de que el script 
termine, así que asegurate de llamar a setRedraw(True) en una sentencia 
finally: en el nivel superior del script.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="26"/>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Crea un nuevo rectángulo en la página actual y devuelve su nombre. Las 
coordenadas x, y, anchura y altura se expresan en las unidades actuales 
del documento (ver constantes UNIT). &quot;name&quot; debería ser un identificador 
único para el objeto porque el objeto se referenciará con ese nombre 
después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>newPage(where [,&quot;template&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;template&quot; specifies the name of the
template page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">newPage(where [,&quot;template&quot;])

Crea una nueva página. Si &quot;where&quot; es -1 la página se añade al documento, 
de otro modo la página se inserta antes de la página &quot;where&quot;. Los números 
de página se cuentan de 1 en adelante, sin importar cuál es el número que se 
muestra en la primera página del documento. El parámetro opcional &quot;template&quot; 
especifica el nombre de la plantilla para la nueva página.

Puede lanzar la excepción IndexError si el número de página está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="22"/>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Establece el degradado de relleno del objeto con nombre &quot;name&quot; como 
tipo &quot;type&quot;. Las descripciones de color son las mismas que para setFillColor() 
y setFillShade(). Ver las constantes FILL_&lt;tipo&gt; para los tipos disponibles.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="23"/>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getFontSize([&quot;name&quot;]) -&gt; float

Devuelve el tamaño de fuente en puntos del marco de texto con nombre 
&quot;name&quot;. Si el marco de texto tiene texto seleccionado, devuelve el del 
primer caracter de la selección. 
Si no se le pasa un nombre se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="21"/>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation>messagebarText(&quot;string&quot;)

Escribe la cadena &quot;string&quot; en la barra de mensaje (barra de estado) de Scribus. 
El texto debe estar codificado en UTF8 o &apos;unicode&apos; (recomendado).
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>register_macro_callable(name, callable, accel=&apos;&apos;)

Create a macro called &quot;name&quot; with the existing callable object &quot;callable&quot;.
The passed callable must not require any arguments when called (it may take
optional arguments, but will not be given any).
If provided, the string &quot;accel&quot; will be used to set a keyboard shortcut
for the macro.
If the passed callable is a class, it will be rejected. Functions and bound
methods are quite acceptable, as are instances of classes that provide a
__call__ method with no arguments. There is no problem with registering
a callable more than once, nor with registering multiple bound methods
of a single instance.
</source>
        <translation type="obsolete">register_macro_callable(name, callable, accel=&apos;&apos;)

Crea una macro llamada &quot;name&quot; con el objeto ya existente llamado &quot;callable&quot;.
&quot;callable&quot; no debe requerir argumentos cuando se llame (puede tener
argumentos opcionales, pero no se le pasará ninguno). 
La cadena &quot;accel&quot; se usará como acceso rápido para la macro, si se
proporciona.
Si &quot;callable&quot; es una clase se rechazará. Se admiten funciones y métodos
bound, al igual que instancias de clases que proporcionen un método
__call__ sin argumentos. No hay ningún problema en registrar el mismo
&quot;callable&quot; más de una vez, ni en registrar múltiples métodos bound de una
única instancia.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="26"/>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="55"/>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/svgimport.h" line="21"/>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>@default</name>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="35"/>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation>getColor(&quot;name&quot;) -&gt; tuple

Devuelve un vector (C, M, Y, K) que tiene las cuatro componentes de 
color del color &quot;name&quot; del documento actual. Si no hay un documento 
abierto, usa los colores del documento por defecto. 

Puede lanzar la excepción NotFoundError si no se encuentra el color indicado. 
Puede lanzar la excpeción ValueError si se especifica un nombre no válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="64"/>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation>changeColor(&quot;name&quot;, c, m, y, k)

Cambia el color &quot;name&quot; al valor CMYK especificado. El valor del color 
se define mediante cuatro componentes: c = cian, m = magenta, 
y = amarillo y k = negro. Las componentes deberían estar en el 
rango 0 a 255. 

Puede lanzar la excepción NotFoundError si no se encuentra el color indicado. 
Puede lanzar la excpeción ValueError si se especifica un nombre no válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="77"/>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">defineColor(&quot;name&quot;, c, m, y, k)

Define un nuevo color llamado &quot;name&quot;. El valor del color se define mediante 
cuatro componentes: c = cian, m = magenta, y = amarillo y k = negro. 
Las componentes deberían estar en el rango 0 a 255. 

Puede lanzar la excpeción ValueError si se especifica un nombre no válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="94"/>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Borra el color &quot;name&quot;. Cada aparición de ese color se reemplaza 
con el color &quot;replace&quot;. Si no se especifica, se reemplaza por el 
color &quot;Ninguno&quot; - transparente.

Si no hay ningún documento abierto deleteColor funciona sobre los 
colores del documento por defecto. En ese caso, aunque se indique,
&quot;replace&quot; no tiene efecto.

Puede lanzar la excepción NotFoundError si no se encuentra el color indicado. 
Puede lanzar la excpeción ValueError si se especifica un nombre no válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="106"/>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Cada aparición del color &quot;name&quot; se reemplaza por el color &quot;replace&quot;.

Puede lanzar la excepción NotFoundError si no se encuentra el color indicado. 
Puede lanzar la excpeción ValueError si se especifica un nombre no válido.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot; ,haspreview, issave]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. The default for both of the
opional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="obsolete">fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot; ,haspreview, issave]) -&gt; string con nombre de archivo

Muestro un diálogo de Abrir Archivo con el título &quot;caption&quot;. Los archivos se 
filtran por la cadena &quot;filter&quot;. Se puede suministrar un nombre de archivo o 
ruta por defecto (defaultname), si no se quiere usar se debe dejar vacío. 
Si haspreview es True muestra una pequeña previsualización. Cuando el 
parámetro issave es True el diálogo se comporta como un diálogo de 
&quot;Guardar Como&quot;, de modo se comporta como un diálogo de &quot;Abrir Archivo&quot;. 
Ambos parámetros son False por defecto. 

El filtro, si se especifica, tiene la forma &apos;comentario (*.tipo *.tipo2 ...)&apos;. 
Por ejemplo &apos;Imágenes (*.png *.xpm *.jpg)&apos;.

Mirar la Documentación de Qt de QFileDialog para detalles de los filtros. 

Ejemplo: fileDialog(&apos;Abrir entrada&apos;, &apos;Archivos CSV (*.csv)&apos;) 
Ejemplo: fileDialog(&apos;Guardar informe&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddialog.h" line="88"/>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Muestra un cuadro de mensaje con el título &quot;caption&quot;, el mensaje &quot;message&quot;, 
un icono &quot;icon&quot; y hasta 3 botones. Por defecto no se usa ningún icono y sólo 
hay un botón, Aceptar. Sólo son obligatorios los parámetros caption y message, 
sin embargo se recomienda definir un icono y el botón o botones apropiados. 
El mensaje puede contener etiquetas simples similares a las de HTML.

Devuelve el número del botón que presionó el usuario. Los números de los 
botones empiezan en 1. 

Para los parámetros del iconoy de los botones hay constantes predefinidas 
disponibles con los mismos nombres que en la Documentación de Qt. Son las 
constantes BUTTON_* e ICON_* definidas en el módulo. Hay también otras 
dos constantes extra que pueden ser combinadas con un OR binario con las 
constantes de los botones: 
    BUTTONOPT_DEFAULT   Presionar intro presiona este botón.
    BUTTONOPT_ESCAPE    Presionar escape presiona este botón.

Ejemplos de uso: 
result = messageBox(&apos;Error en Script&apos;,
                    &apos;Este scrpt sólo funciona cuando tienes un marco de texto seleccionado.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Botones definidos:
BUTTON_NONE (ninguno), BUTTON_ABORT (abortar), BUTTON_CANCEL (cancelar), 
BUTTON_IGNORE (ignorar), BUTTON_NO (no), BUTTON_NOALL (no a todo), 
BUTTON_OK (aceptar), BUTTON_RETRY (reintentar), BUTTON_YES (sí), 
BUTTON_YESALL (sí a todo)

Constantes de iconos:
ICON_NONE (ninguno), ICON_INFORMATION (información), ICON_WARNING (aviso), 
ICON_CRITICAL. (crítico)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddialog.h" line="101"/>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation>valueDialog(caption, message [,defaultvalue]) -&gt; string

Muestra el diálogo de &apos;Introducir una cadena&apos; y devuelve su valor 
como un string. 
Parámetros: título de la ventana, texto de la ventana y un valor 
por defecto opcional. 

Ejemplo: valueDialog(&apos;título&apos;, &apos;texto de la ventana&apos;, &apos;opcional&apos;)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="108"/>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation>closeDoc()

Cierra el documento actual sin preguntar para guardar.

Puede lanzar la excepción NoDocOpenError si no hay ningún 
documento que cerrar.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="117"/>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation>haveDoc() -&gt; bool

Devuelve true si hay un documento abierto.</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="128"/>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation>openDoc(&quot;name&quot;)

Abre el documento &quot;name&quot;.

Puede lanzar la excepción ScribusError si el documento no se puede abrir.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="141"/>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation>saveDoc()

Guarda el documento actual con su nombre actual, y devuelve true si se 
guarda correctamente. Si el documento no se había guardado todavía, 
muestra un diálogo de guardar archivo. 

Si se produce un error al guardar, actualmente no hay forma de informarlo.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="152"/>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation>saveDocAs(&quot;name&quot;)

Guarda el documento actual con el nombre &quot;name&quot; (que puede ser un ruta 
absoluta o relativa).

Puede lanzar la excepción ScribusError si se produce un error al guardar.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="obsolete">saveDocAs(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Establece la información básica del documento: autor, información y 
descripción. Todos los parámetros son strings.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(lr, rr, tr, br)

Establece los márgenes del documento, Izquierda(lr), Derecha(rr), Arriba(tr) 
y Abajo(br). Los márgenes se expresan en las unidades del documento - ver 
las constantes UNIT_&lt;tipo&gt;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="185"/>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation>setUnit(type)

Cambia las unidades de medida del documento. Los valores posibles para &quot;unit&quot; 
son las constantes UNIT_&lt;tipo&gt;.

Puede lanzar una excepción ValueError si se pasa una unidad no válida.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="196"/>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation>getUnit() -&gt; integer (constante de unidad de Scribus)

Devuelve las unidades de medida del documento. El valor devuelto será una 
de las constantes UNIT_*:
UNIT_INCHES (pulgadas), UNIT_MILLIMETERS (milimetros), 
UNIT_PICAS (picas), UNIT_POINTS (puntos).
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="206"/>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation>loadStylesFromFile(&quot;filename&quot;)

Carga en el documento actual los estilos de párrafo del documento 
de Scribus que se encuentra en &quot;filename&quot;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="218"/>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation>setDocType(facingPages, firstPageLeft)

Establece el tipo de documento. Para que las páginas se muestren enfrentadas 
el primer parámetro debe ser FACINGPAGES, para desactivar las páginas 
enfrentadas debe ser NOFACINGPAGES. Si se quiere que la primera página esté 
a la izquierda el segundo parámetro debe ser FIRSTPAGELEFT, para que esté a 
la derecha debe ser FIRSTPAGERIGHT.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="51"/>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getLineColor([&quot;name&quot;]) -&gt; string

Devuelve el nombre del color de línea del objeto &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="81"/>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation>getLineWidth([&quot;name&quot;]) -&gt; integer

Devuelve el ancho de línea del objeto &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="91"/>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getLineShade([&quot;name&quot;]) -&gt; integer

Devuelve la intesnsidad del color de línea del objeto &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="102"/>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Devuelve el estilo de borde de línea del objeto &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
Los tipos de unión son: 
JOIN_BEVEL (biselada), JOIN_MITTER (de inglete), JOIN_ROUND (redondeada)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="113"/>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation>getLineEnd([&quot;name&quot;]) -&gt; integer (ver constantes)

Devuelve el estilo de extremo de línea del objeto &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
Los tipos de extremo son: 
CAP_FLAT (plano), CAP_ROUND (redondeado), CAP_SQUARE (cuadrado)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="124"/>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation>getLineStyle([&quot;name&quot;]) -&gt; integer (ver constantes)

Devuelve el estilo de línea del objeto &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado. 
Las constantes de estilos de línea son:
LINE_DASH (a trazos), LINE_DASHDOT (raya punto), 
LINE_DASHDOTDOT (raya punto punto), LINE_DOT (a puntos), 
LINE_SOLID (sólida)
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="134"/>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getFillShade([&quot;name&quot;]) -&gt; integer

Devuelve el valor de saturación del color de relleno del objeto &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="145"/>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">getCornerRadius([&quot;name&quot;]) -&gt; integer

Devuelve el radio de las esquinas del objeto &quot;name&quot;. 
El radio se expresa en puntos.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="155"/>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Devuelve un par (x, y) que contiene los valores de escalado del 
marco de imagen &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="165"/>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation>getImageName([&quot;name&quot;]) -&gt; string

Devuelve el nombre de archivo de la imagen en el marco de imagen &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="177"/>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="unfinished">getPosition([&quot;name&quot;]) -&gt; (x,y)

Devuelve un par (x, y) con la posición del objeto &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
Las posiciones están expresadas en las unidades actuales del documento 
- ver UNIT_&lt;tipo&gt; para más referencias.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="189"/>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation>getSize([&quot;name&quot;]) -&gt; (width,height)

Devuelve un par (ancho, alto) con el tamaño del objeto &quot;name&quot;.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
El tamaño está expresado en las unidades actuales del documento 
- ver UNIT_&lt;tipo&gt; para más referencias.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="200"/>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation>getRotation([&quot;name&quot;]) -&gt; integer

Devuelve la rotación del objeto &quot;name&quot;. El valor está expresado 
en grados y si es positivo es en el sentido de las agujas del reloj.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="209"/>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation>getAllObjects() -&gt; list

Devuelve una lista que contiene los nombres de todos los objetos 
de la página actual.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="35"/>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation>moveObjectAbs(x, y [, &quot;name&quot;])

Mueve el objeto &quot;name&quot; a una nueva posición. Las coordenadas están 
expresadas en las unidades actuales del documento (ver constantes UNIT).
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
Si el objeto a mover pertenece a un grupo, se mueve todo el grupo.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="48"/>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertext at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation>rotateObject(rot [, &quot;name&quot;])

Rota el objeto &quot;name&quot; &quot;rot&quot; grados de forma relativa. El objeto se rota sobre 
el objeto que está seleccionado como punto de rotación - por defecto es 
el vértice superior izquierdo con cero grados de rotación. Los valores positivos 
significan rotación en sentido contrario a las agujas del reloj cuando se usa el 
punto de rotación por defecto.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="59"/>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished">rotateObjectAbs(rot [, &quot;name&quot;])

Establece la rotación del objeto &quot;name&quot; a &quot;rot&quot;. Los valores positivos 
significan rotación en sentido contrario a las agujas del reloj.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="69"/>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation>sizeObject(width, height [, &quot;name&quot;])

Redimensiona el objeto &quot;name&quot; a la anchura (width) y altura (height) dados.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="80"/>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation>getSelectedObject([nr]) -&gt; string

Devuelve el nombre del objeto seleccionado. &quot;nr&quot;, si se especifica, indica 
el número del objeto seleccionado, p. ej. 0 significa el primer objeto 
seleccionado, 1 el segundo objeto seleccionado, etc.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="89"/>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation>selectionCount() -&gt; integer

Devuelve el número de objetos seleccionados.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="98"/>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation>selectObject(&quot;name&quot;)

Selecciona el objeto con el nombre &quot;name&quot;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="107"/>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation>deselectAll()

Deselecciona todos los objetos del documento entero.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="118"/>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation>groupObjects(list)

Agrupa los objetos nombrados en &quot;list&quot;. &quot;list&quot; debe contener los nombres 
de los objetos a ser agrupados. 
Si no se pasa una lista se usan los objetos que estén seleccionados.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="126"/>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation>unGroupObjects(&quot;name&quot;)

Destruye el grupo al que pertenece el objeto &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="141"/>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation>scaleGroup(factor [,&quot;name&quot;])

Escala el grupo al que pertenece el objeto &quot;name&quot;. Los valores mayor de 1 
agrandan el grupo, los menores de 1 lo hacen más pequeño, p. ej. un valor 
de 0.5 escala el grupo al 50% de su tamaño original, un valor de 1.5 escala 
el grupo a 150% de su tamaño original. 
El valor de &quot;factor&quot; debe ser mayor de cero.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.

Puede lanzar la excepción ValueError si se pasa un factor de escala no válido. 
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="153"/>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Carga la imagen &quot;filename&quot; en el marco de imagen &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.

Puede lanzar la excepción WrongFrameTypeError si el marco de destino 
no es un marco de imagen.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="166"/>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation>scaleImage(x, y [, &quot;name&quot;])

Establece los factores de escalado de la imagen en el marco de 
imagen &quot;name&quot;. Un valor de 1 significa 100%.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.

Puede lanzar la excepción WrongFrameTypeError si el marco de destino 
no es un marco de imagen.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="177"/>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation>lockObject([&quot;name&quot;]) -&gt; bool

Bloquea el objeto &quot;name&quot; si está desbloqueado o lo desbloquea en 
caso contrario. Devuelve true si se bloquea. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="187"/>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation>isLocked([&quot;name&quot;]) -&gt; bool

Devuelve true si el objeto &quot;name&quot; está bloqueado.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="33"/>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation>getFontNames() -&gt; list

Devuelve una lista con los nombres de todas las fuentes disponibles.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="43"/>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation>getXFontNames() -&gt; list of tuples

Da una mayor información sobre las fuentes. Devuelve una lista de vectores con: 
[ (nombre de Scribus, Familia, Nombre real, empotrar subconjunto (1|0), 
empotrar PS (1|0), archivo de fuente), (...), ...]
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="71"/>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation>getLayers() -&gt; list

Devuelve una lista con los nombres de todas las capas definidas.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="83"/>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>setActiveLayer(&quot;name&quot;)

Establece la capa activa a la capa con nombre &quot;name&quot;.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si la el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="92"/>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation>getActiveLayer() -&gt; string

Devuelve el nombre de la capa activa actual.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="105"/>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Envía el objeto &quot;name&quot; a la capa &quot;layer&quot;. La capa debe existir.
Si no se pasa un nombre, se usa el objeto que esté seleccionado.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="118"/>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>setLayerVisible(&quot;layer&quot;, visible)

Establece si la capa &quot;layer&quot; es visible o no. 
Si &quot;visible&quot; es false la capa será invisible.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the printable set to
false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerPrintable(&quot;layer&quot;, printable)

Establece si la capa &quot;layer&quot; es imprimible o no. 
Si &quot;printable&quot; es false la capa no se imprimirá.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="300"/>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>deleteLayer(&quot;layer&quot;)

Borra la capa con el nombre &quot;layer&quot;. No ocurre nada si la capa no existe o 
si es la única capa del documento.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="311"/>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>createLayer(layer)

Crea una nueva capa co el nombre &quot;name&quot;.

Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="320"/>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation>getGuiLanguage() -&gt; string

Devuelve una cadena con el código del idioma usado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="43"/>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Crea una elipse en la página actual y devuelve su nombre. 
Las coordenadas x, y, anchura y altura se expresan en las unidades 
actuales del documento (ver constantes UNIT). &quot;name&quot; debería ser 
un identificador único para el objeto porque se referenciará con ese 
nombre después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="60"/>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Crea un marco de imagen en la página actual y devuelve su nombre. 
Las coordenadas x, y, anchura y altura se expresan en las unidades 
actuales del documento. &quot;name&quot; debería ser un identificador único 
para el objeto porque se referenciará con ese nombre después. 
Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="75"/>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Crea un marco de texto en la página actual y devuelve su nombre. 
Las coordenadas x, y, anchura y altura se expresan en las unidades 
actuales del documento (ver constantes UNIT). &quot;name&quot; debería ser 
un identificador único para el objeto porque se referenciará con ese 
nombre después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="90"/>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Crea una línea del punto (x1, y1) al punto (x2, y2) y devuelve su 
nombre. Las coordenadas se expresan en las unidades actuales 
del documento (ver constantes UNIT). &quot;name&quot; debería ser un 
identificador único para el objeto porque se referenciará con ese 
nombre después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="108"/>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Crea una polilínea y devuelve su nombre. Los puntos de la polilínea 
se almacenan en la lista &quot;list&quot; en el orden siguiente: [x1, y1, x2, y2, ...xn, yn]. 
Las coordenadas se expresan en las unidades actuales del documento 
(ver constantes UNIT). &quot;name&quot; debería ser un identificador único para el 
objeto porque se referenciará con ese nombre después. Si no se le da 
un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando. 
Puede lanzar la excepción ValueError si se pasa un número de puntos 
insuficiente, o si el número de valores es impar.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="128"/>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation>createPolygon(list, [&quot;name&quot;]) -&gt; string

Crea un polígono y devuelve su nombre. Los puntos del polígono se 
almacenan en la lista &quot;list&quot; en el orden siguiente: [x1, y1, x2, y2, ...xn, yn]. 
Al menos se necesitan 3 puntos. No se necesita repetir el primer punto 
para cerrar el polígono, se cierra automáticamente conectando el primer 
punto con el último. Las coordenadas se expresan en las unidades actuales 
del documento (ver constantes UNIT). &quot;name&quot; debería ser un identificador 
único para el objeto porque se referenciará con ese nombre después. 
Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando. 
Puede lanzar la excepción ValueError si se pasa un número de puntos 
insuficiente, o si el número de valores es impar.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="149"/>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Crea una curva de bezier y devuelve su nombre. Los puntos de la 
curva de bezier se almacenan en la lista &quot;list&quot; en el orden siguiente: 
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn, yn, kxn, kyn]. 
En la lista de puntos, x e y son las coordenadas del punto y kx y ky 
el punto de control de la curva. Las coordenadas se expresan en las 
unidades actuales del documento (ver constantes UNIT). &quot;name&quot; debería 
ser un identificador único para el objeto porque se referenciará con ese 
nombre después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando. 
Puede lanzar la excepción ValueError si se pasa un número de puntos 
insuficiente, o si el número de valores es impar.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="165"/>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Crea un texto adjunto a un trazado, adjuntando el objeto&quot;textbox&quot; al objeto 
&quot;beziercurve&quot; y devuelve su nombre. Las coordenadas se expresan en las 
unidades actuales del documento (ver constantes UNIT). &quot;name&quot; debería 
ser un identificador único para el objeto porque se referenciará con ese 
nombre después. Si no se le da un nombre, Scribus creará uno. 

Puede lanzar la excepción NameExistsError si se pasa un nombre que 
ya se está usando. 
Puede lanzar la excepción NotFoundError si alguno de los objetos no existe.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="177"/>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation>deleteObject([&quot;name&quot;])

Borra el objeto con el nombre &quot;name&quot;. 
Si no se pasa un nombre, se usa el objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>textFlowsAroundFrame(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional boolean &quot;state&quot;. If &quot;state&quot;
is not passed, text flow is toggled.
</source>
        <translation type="obsolete">textFlowsAroundFrame(&quot;name&quot; [, state])

Activa o desactiva la característica &quot;el texto fluye alrededor del marco&quot; 
del objeto &quot;name&quot;, según el valor del parámetro booleano &quot;state&quot;. 
Si no se pasa &quot;state&quot;, se invierte dicha característica.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="211"/>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation>objectExists([&quot;name&quot;]) -&gt; bool

Comprueba si existe en el documento un objeto con el nombre &quot;name&quot;. 
Si no se pasa un nombre, devuelve true si hay algún objeto seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="227"/>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation>setStyle(&quot;style&quot; [, &quot;name&quot;])

Aplica el estilo &quot;style&quot; al objeto &quot;name&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="240"/>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation>getAllStyles() -&gt; list

Devuelve una lista con los nombres de todos los estilos 
de párrafo del documento.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="36"/>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation>currentPage() -&gt; integer

Devuelve el número de la página actual. Los números de página van del 1 en 
adelante, independientemente del número mostrado en la primera página.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="45"/>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation>redrawAll()

Redibuja todas las páginas.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="65"/>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation>savePageAsEPS(&quot;name&quot;)

Guarda la página actual como un EPS al archivo &quot;name&quot;.

Puede lanzar la excpeción ScribusError si hubo un error al guardar.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="78"/>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation>deletePage(nr)

Borra la página &quot;nr&quot;. No hace nada si el documento sólo tiene una página. 
Los números de página van del 1 en adelante, independientemente del 
mostrado en la primera página. 

Puede lanzar la excepción IndexError si el número de página está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="91"/>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (curently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation>gotoPage(nr)

Cambia a la página &quot;nr&quot; (es decir, hace la página actual la página &quot;nr&quot;). 
Nota que actualmente no cambia la página que se está mostrando, sólo 
establece la página sobre la que operan los comandos del script.

Puede lanzar la excepción IndexError si el número de página está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="100"/>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation>pageCount() -&gt; integer

Devuelve el número de páginas del documento.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="110"/>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation>getHGuides() -&gt; list

Devuelve una lista que contiene las posiciones de las guías horizontales. 
Los valores están en las unidades actuales del documento - ver las 
constantes UNIT_&lt;tipo&gt;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="123"/>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation>setHGuides(list)

Establece las guías horizontales. El parámetro debe ser una lista de 
posiciones medidas en las unidades actuales del documento - ver 
las constantes UNIT_&lt;tipo&gt;.

Ejemplo: setHGuides(getHGuides() + [200.0, 210.0] # añade guías sin perder ninguna
         setHGuides([90,250]) # reemplaza las guías actuales
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="132"/>
        <source>getVGuides()

See getHGuides.
</source>
        <translation>getVGuides()

Ver getHGuides.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="141"/>
        <source>setVGuides()

See setHGuides.
</source>
        <translation>setVGuides()

Ver setHGuides.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="151"/>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation>getPageSize() -&gt; tuple

Devuelve un vector con las dimensiones de página medidas en las unidades 
actuales del documento. Ver las constantes UNIT_&lt;tipo&gt; y getPageMargins()
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="167"/>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation>getPageItems() -&gt; list

Devuelve una lista de vectores con los objetos de la página actual. 
El vector es (nombre, tipoDeObjeto, orden). 
P. ej. [(&apos;Texto1&apos;, 4, 0), (&apos;Imagen1&apos;, 2, 1)] significa que el objeto &apos;Texto1&apos; 
es un marco de texto (tipo 4) y es el primero de la página...
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="33"/>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Establece el color de relleno del objeto &quot;name&quot; al color &quot;color&quot;. 
&quot;color&quot; es el nombre de uno de los colores definidos. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="63"/>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Establece el color de línea del objeto &quot;name&quot; al color &quot;color&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="96"/>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation>setLineWidth(width, [&quot;name&quot;])

Establece el ancho de línea del objeto &quot;name&quot; a &quot;width&quot;. &quot;width&quot; debe estar 
en el rango de 0.0 a 12.0 inclusive, y se miede en puntos.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si el ancho de línea está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="110"/>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation>setLineShade(shade, [&quot;name&quot;])

Establece la saturación del color de línea del objeto &quot;name&quot; a &quot;shade&quot;.
&quot;shade&quot; debe ser un valor entero en el rango de 0 (más claro) a 100
(color de mayor intensidad). 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si la saturación está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="121"/>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation>setLineJoin(join, [&quot;name&quot;])

Establece el estilo de unión de línea del objeto &quot;name&quot; al estilo &quot;join&quot;.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
Hay constantes predefinidas para &quot;join&quot; - JOIN_&lt;tipo&gt;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="132"/>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation>setLineEnd(endtype, [&quot;name&quot;])

Establece el estilo de extremo de línea del objeto &quot;name&quot; al estilo &quot;cap&quot;.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
Hay constantes predefinidas para &quot;cap&quot; - CAP_&lt;tipo&gt;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="143"/>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation>setLineStyle(style, [&quot;name&quot;])

Establece el estilo de línea del objeto &quot;name&quot; al estilo &quot;style&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
Hay constantes predefinidas para &quot;style&quot; - LINE_&lt;tipo&gt;.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="157"/>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation>setFillShade(shade, [&quot;name&quot;])

Establece la saturación del color de relleno del objeto &quot;name&quot; a &quot;shade&quot;.
&quot;shade&quot; debe ser un valor entero en el rango de 0 (más claro) a 100
(color de mayor intensidad). 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si la saturación está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="169"/>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation>setCornerRadius(radius, [&quot;name&quot;])

Establece el radio de las esquinas del objeto &quot;name&quot;. El radio está 
expreado en puntos. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si el radio está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="181"/>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Establece el estilo de línea del objeto &quot;name&quot; al estilo de nombre &quot;namedStyle&quot;.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción NotFoundError si el estilo de línea no existe.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="35"/>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation>getFont([&quot;name&quot;]) -&gt; string

Devuelve el nombre de la fuente del marco de texto &quot;name&quot;. Si el 
marco de texto tiene texto seleccionado, devuelve el del primer 
caracter de la selección. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="45"/>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getTextLength([&quot;name&quot;]) -&gt; integer

Devuelve la longitud del texto en el marco de texto &quot;name&quot;.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="67"/>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation>getText([&quot;name&quot;]) -&gt; string

Devuelve el texto del marco de texto &quot;name&quot;.  Si el marco de texto 
tiene texto seleccionado, devuelve el texto seleccionado. Devuelve 
todo el texto del marco, no solo el que se ve actualmente.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="79"/>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation>getAllText([&quot;name&quot;]) -&gt; string

Devuelve el texto del marco de texto &quot;name&quot; y de todos los marcos de texto 
que están enlazados con este marco. Si el marco de texto tiene texto 
seleccionado, devuelve el texto seleccionado.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="89"/>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getLineSpacing([&quot;name&quot;]) -&gt; float

Devuelve el interlineado del marco de texto &quot;name&quot; expresado en puntos. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="99"/>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation>getColumnGap([&quot;name&quot;]) -&gt; float

Devuelve la distancia entre columnas del marco de texto &quot;name&quot; expresado 
en puntos. Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="109"/>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation>getColumns([&quot;name&quot;]) -&gt; integer

Devuelve el número de columnas del marco de texto &quot;name&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="121"/>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation>setText(&quot;text&quot;, [&quot;name&quot;])

Establece el texto del marco de texto &quot;name&quot; al texto de la cadena &quot;text&quot;. 
El texto debe estar codificado en UTF8 - usa p. ej. unicode(&quot;text&quot;, &apos;iso-8859-2&apos;). 
Ver las FAQ para más detalles. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="148"/>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation>setFont(&quot;font&quot;, [&quot;name&quot;])

Establece la fuente del marco de texto &quot;name&quot; a &quot;font&quot;. Si hay texto 
seleccionado sólo cambia la del texto seleccionado.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si no se puede encontrar la fuente.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="162"/>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation>setFontSize(size, [&quot;name&quot;])

Establece el tamaño de fuente del marco de texto &quot;name&quot; a &quot;size&quot;. 
&quot;size&quot; debe ser un valor en puntos. Si hay texto seleccionado sólo 
cambia la del texto seleccionado. &quot;size&quot; debe ser un entero en el 
rango 1 a 512. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si el tamaño está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="175"/>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation>setLineSpacing(size, [&quot;name&quot;])

Establece el interlineado del marco de texto &quot;name&quot; a &quot;size&quot;. 
&quot;size&quot; es un valor en puntos. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado. 

Puede lanzar la excepción ValueError si el interlineado está fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="187"/>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation>setColumnGap(size, [&quot;name&quot;])

Establece la distancia entre columnas del marco de texto &quot;name&quot; al 
valor &quot;size&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si la distancia entre columnas 
está fuera de rango (debe ser positiva).
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="199"/>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation>setColumns(nr, [&quot;name&quot;])

Establece el número de columnas del marco de texto &quot;name&quot; al entero &quot;nr&quot;.
Si no se pasa un nombre, se aplica al objeto que esté seleccionado. 

Puede lanzar la excepción ValueError si el número de columnas es menor de uno.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="212"/>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation>setTextAlignment(align, [&quot;name&quot;])

Establece el alineamiento del marco de texto &quot;name&quot; al alineamiento 
indicado. &quot;align&quot; debería ser una de las constantes ALIGN_ definidas 
en este módulo - ver dir(scribus).
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.

Puede lanzar la excepción ValueError si la constante de la alineamiento 
no es válida.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="237"/>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation>deleteText([&quot;name&quot;])

Borrar el texto del marco de texto &quot;name&quot;. Si hay texto seleccionado sólo 
se borra el texto seleccionado. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="248"/>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Establece el color del texto marco de texto &quot;name&quot; al color &quot;color&quot;. Si 
hay texto seleccionado sólo se cambia el texto seleccionado. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="258"/>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Establece el color del trazo del texto a &quot;color&quot;. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="271"/>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation>setTextShade(shade, [&quot;name&quot;])

Establece la saturación del color del texto del objeto &quot;name&quot; a &quot;shade&quot;. 
Si hay texto seleccionado, sólo cambia el texto seleccionado. &quot;shade&quot; 
debe ser un valor entero en el rango de 0 (más claro) a 100 (color de 
mayor intensidad).
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="284"/>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Enlaza dos marcos de texto. El marco llamado &quot;fromname&quot; se enlaza al marco 
llamado &quot;toname&quot;. El marco de destino debe ser un marco de texto vacío y 
no debe estar enlazado a otros ni desde otros marcos de texto.

Puede lanzar la excepción ScribusException si se violan las reglas de enlazado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="301"/>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation>unlinkTextFrames(&quot;name&quot;)

Elimina el objeto &quot;name&quot; del flujo de enlazado de marcos de texto. Si el 
marco estaba en medio de una cadena, los marcos anterior y siguiente 
se enlazarán, p. ej. &apos;a-&gt;b-&gt;c&apos; pasa a ser &apos;a-&gt;c&apos; al ejecutar unlinkTextFrames(b) 

Puede lanzar la excepción ScribusException si se violan las reglas de enlazado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="314"/>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation>traceText([&quot;name&quot;])

Convierte el marco de texto &quot;name&quot; a contornos. 
Si no se pasa un nombre, se aplica al objeto que esté seleccionado.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="34"/>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation>progressReset()

Borra la barra de progreso de Scribus. Se llama antes de usar 
la barra de progreso. Ver progressSet.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="47"/>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation>progressTotal(max)

Establece el máximo número de pasos de la barra de progreso al 
número especificado. Ver progressSet.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="61"/>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation>progressSet(nr)

Establece la posición de la barra de progreso a &quot;nr&quot;, un valor relativo a 
lo puesto anteriormente con progressTotal. La barra de progreso usa el 
concepto de pasos, se le dice el número de pasos totales y el número 
pasos completado y mostrará el porcentaje de pasos que se han 
completado. Se puede especificar el número de pasos con progressTotal(). 
El número actual de pasos se establece con progressSet(). Se rebobina al 
principio con progressReset(). 
[basado en la información tomada de la documentación de Qt de Trolltech]
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="69"/>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation>setCursor()

[¡NO SOPORTADO!] 
Esto podría romper cosas, así que no se utiliza de momento.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="83"/>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation>docChanged(bool)

Activa o desactiva el icono de guardar en la barra de iconos de Scribs y la 
opción de menú Guardar. Es útil llamarlo cuando estás cambiando el documento, 
porque Scribus no notará automáticamente cuando se cambie el documento 
con un script.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmani.h" line="199"/>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Establece la opción escalar al tamaño del marco a &quot;scaletoframe&quot; en el marco de
imagen seleccionado o especificado por &quot;name&quot;. 
Si se especifica &quot;proportional&quot;, establece la opción mantener la relación de aspecto
a &quot;proportional&quot;. 
Tanto &quot;scaletoframe&quot; como &quot;proportional&quot; son booleanos.

Puede lanzar la excepción WrongFrameTypeError.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared. If &quot;count&quot; is -1, all text in the frame will
be selected. If &quot;name&quot; is not given the currently selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="obsolete">selectText(start, count, [&quot;name&quot;])

Selecciona &quot;count&quot; caracteres del marco de texto &quot;name&quot; empezando 
desde el carácter &quot;start&quot;. Los caracteres se cuentan desde 0. Si &quot;count&quot; 
es cero, se perderá cualquier selección que hubiera. Si &quot;count&quot; es -1, 
se seleccionará todo el texto del marco. Si no se pasa &quot;name&quot; se usará 
el objeto seleccionado actualmente.

Puede lanzar la excepción IndexError si la selección está fuera de los 
límites del texto.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>register_macro_code(name, sourcetext, accel=&apos;&apos;)

Create a macro named &quot;name&quot; by evaluating the the source code &quot;sourcetext&quot;.
&quot;sourcetext&quot; must follow the same rules as macros created in the GUI.
If provided, the string &quot;accel&quot; will be used to set a keyboard shortcut
for the macro.
</source>
        <translation type="obsolete">register_macro_code(name, sourcetext, accel=&apos;&apos;)

Crea una macro llamada &quot;name&quot; evaluando el código fuente &quot;sourcetext&quot;.
&quot;sourcetext&quot; debe seguir las mismas reglas que las macros creadas en 
la interfaz gráfica. Si se proporciona &quot;accel&quot; se usará para establecer un 
acceso rápido para la macro.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="222"/>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Devuelve si la capa &quot;layer&quot; es imprimible o no, un valor de True significa 
que la capa &quot;layer&quot; se puede imprimir, un valor de False significa que se 
ha desactivado la impresión de la capa&quot;layer&quot;.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB colour
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColorAsRGB(&quot;name&quot;) -&gt; tuple

Devuelve un vector (R,G,B) conteniendo las tres componentes de color 
del color &quot;name&quot; del actual documento, convertido al espacio de color 
RGB. Si no hay ningún documento abierto, devuelve el valor de dicho 
color de los colores por defecto.

Puede lanzar la excepción NotFoundError si no se puede encontrar dicho color. 
Puede lanzar la excepción ValueError si el nombre del color no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="62"/>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Crea una previsualización de la fuente &quot;name&quot; con el texto &quot;sample&quot; y 
de tamaño &quot;size&quot;. Si &quot;filename&quot; no es &quot;&quot;, la imagen se guarda en&quot;filename&quot;. 
De otra forma la imagen se devuelve como una cadena. El argumento 
opcional &quot;format&quot; especifica el formato de imagen a generar, y admite 
cualquier formato permitido por QPixmap.save(). Los formatos comunes 
son PPM, JPEG, PNG y XPM.

Puede lanzar la excepción NotFoundError si no se puede encontrar la 
fuente indicada.
Puede lanzar la excepción ValueError si &quot;filename&quot; o &quot;sample&quot; son 
cadenas vacías.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="208"/>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">isLayerVisible(&quot;layer&quot;) -&gt; bool

Devuelve si la capa &quot;layer&quot; es visible o no, un valor de True significa 
que la capa &quot;layer&quot; es visible, un valor de False significa que la capa
&quot;layer&quot; es invisible.

Puede lanzar la excepción NotFoundError si no se puede encontrar la capa. 
Puede lanzar la excepción ValueError si el nombre de la capa no es válido.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="342"/>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets wether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Establece si (toggle = 1) el marco de texto &quot;name&quot; es un marcador o no. 
Si no se pasa &quot;name&quot; se usa el objeto actualmente seleccionado.

Puede lanzar la excepción WrongFrameTypeError si el marco de destino 
no es un marco de texto.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="354"/>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Devuelve si el marco de texto &quot;name&quot; es un marcador de PDF. 
Si no se pasa &quot;name&quot; se usa el objeto actualmente seleccionado.

Puede lanzar la excepción WrongFrameTypeError si el marco de destino 
no es un marco de texto.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="181"/>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation>getPageMargins()

Devuelve los márgenes de página como un vector (arriba, izquierda, derecha, abajo) 
en las unidades actuales. Ver las constantes UNIT_&lt;tipo&gt; y getPageSize().
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference). The first character has
an index of 0. Inserting at position -1 appends text to the frame. If &quot;name&quot;
is not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="obsolete">insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserta el texto &quot;text&quot; en la posición &quot;pos&quot; en el marco de texto &quot;name&quot;. 
El texto debe estar codificado en UTF (ver setText() como referencia). 
El primer carácter tiene índice 0. Insertar en la posición -1 añade &quot;text&quot; 
al marco. Si no se pasa &quot;name&quot; se usará el objeto actualmente seleccionado.

Puede lanzar la excepción IndexError para una inserción fuera de rango.
</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdcolor.h" line="50"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddialog.h" line="111"/>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="184"/>
        <source>getChildren(object, ofclass=None, ofname=None, regexpmatch=False, recursive=True)

Return a list of children of `object&apos;, possibly restricted to children
of class named `ofclass&apos; or children named `ofname&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.

See QObject::children() in the Qt docs for more information.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetsetprop.h" line="201"/>
        <source>getChild(object, childname, ofclass=None, recursive=True)

Return the first child of `object&apos; named `childname&apos;, possibly restricting
the search to children of type name `ofclass&apos;. If `recursive&apos; is true,
search recursively through children, grandchildren, etc.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="226"/>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="328"/>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="96"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="226"/>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="233"/>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="241"/>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="249"/>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="256"/>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/guiapp.h" line="95"/>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="31"/>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="41"/>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="61"/>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="71"/>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="144"/>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="236"/>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="250"/>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="263"/>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="275"/>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="287"/>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="193"/>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdobj.h" line="252"/>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="162"/>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdpage.h" line="54"/>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="55"/>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="131"/>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdtext.h" line="135"/>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fileloader/scribus12format/scribus12format.cpp" line="1593"/>
        <source>Copy #%1 of </source>
        <translation type="obsolete">Copia #%1 de </translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddoc.h" line="173"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="157"/>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="170"/>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="182"/>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdmisc.h" line="194"/>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="43"/>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="53"/>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="73"/>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdsetprop.h" line="83"/>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/svgimport.h" line="33"/>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/svgimport.h" line="45"/>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/svgimport.h" line="57"/>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmddialog.h" line="46"/>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
opional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>About</name>
    <message>
        <location filename="../about.cpp" line="48"/>
        <source>About Scribus %1</source>
        <translation>Acerca de Scribus %1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus Version %1
%2 %3</source>
        <translation type="obsolete">Versión de Scribus %1
%2 %3</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Build-ID:</source>
        <translation type="obsolete">Build-ID:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="140"/>
        <source>&amp;About</source>
        <translation>&amp;Acerca de</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="146"/>
        <source>Development Team:</source>
        <translation>Equipo de Desarrollo:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="158"/>
        <source>Contributions from:</source>
        <translation>Contribuciones de:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Windows port:</source>
        <translation type="obsolete">Versión de Windows:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="189"/>
        <source>Official Documentation:</source>
        <translation>Documentación Oficial:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="197"/>
        <source>Other Documentation:</source>
        <translation>Otra Documentación:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="211"/>
        <source>A&amp;uthors</source>
        <translation>A&amp;utores</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="219"/>
        <source>Official Translations and Translators:</source>
        <translation>Traducciones Oficiales y Traductores:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Catalan:</source>
        <translation type="obsolete">Catalán:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Czech:</source>
        <translation type="obsolete">Checo:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Danish:</source>
        <translation type="obsolete">Danés:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>English (British):</source>
        <translation type="obsolete">Inglés (Británico):</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Esperanto:</source>
        <translation type="obsolete">Esperanto:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Finnish:</source>
        <translation type="obsolete">Finlandés:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>French:</source>
        <translation type="obsolete">Francés:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>German:</source>
        <translation type="obsolete">Alemán:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Italian:</source>
        <translation type="obsolete">Italiano:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Korean:</source>
        <translation type="obsolete">Coreano:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Norwegian:</source>
        <translation type="obsolete">Noruego:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Polish:</source>
        <translation type="obsolete">Polaco:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Russian:</source>
        <translation type="obsolete">Ruso:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Serbian:</source>
        <translation type="obsolete">Serbio:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Slovak:</source>
        <translation type="obsolete">Eslovaco:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Slovenian:</source>
        <translation type="obsolete">Esloveno:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Spanish:</source>
        <translation type="obsolete">Español:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Swedish:</source>
        <translation type="obsolete">Sueco:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Ukrainian:</source>
        <translation type="obsolete">Ucraniano:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Welsh:</source>
        <translation type="obsolete">Galés:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="346"/>
        <source>Previous Translation Contributors:</source>
        <translation>Anteriores Colaboradores en la Traducción:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Basque:</source>
        <translation type="obsolete">Vasco:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Brazilian:</source>
        <translation type="obsolete">Brasileño:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Bulgarian:</source>
        <translation type="obsolete">Búlgaro:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Galician:</source>
        <translation type="obsolete">Gallego:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Hungarian:</source>
        <translation type="obsolete">Hungaro:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Lithuanian:</source>
        <translation type="obsolete">Lituano:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Turkish:</source>
        <translation type="obsolete">Turco:</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="387"/>
        <source>&amp;Translations</source>
        <translation>&amp;Traducciones</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="393"/>
        <source>Homepage</source>
        <translation>Página inicial</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="395"/>
        <source>Online Reference</source>
        <translation>Referencia en línea</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="399"/>
        <source>Bugs and Feature Requests</source>
        <translation>Errores y Peticiones de Características</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="401"/>
        <source>Mailing List</source>
        <translation>Lista de Correo</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="408"/>
        <source>&amp;Online</source>
        <translation>&amp;En línea</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="427"/>
        <source>&amp;Close</source>
        <translation>&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>This panel shows the version, build date and
 compiled in library support in Scribus
The C-C-T equates to C=littlecms C=CUPS T=TIFF support.
Missing library support is indicated by a *</source>
        <translation type="obsolete">Este panel muestra la versión, fecha de construcción y el 
soporte de librerías con que se ha compilado Scribus. 
C-C-T significa soporte de C=CUPS C=littlecms T=TIFF.
Las bibliotecas que falten se indican con un * 
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>%1 %2 %3 </source>
        <translation type="obsolete">%1 %2 %3 </translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Afrikaans:</source>
        <translation type="obsolete">Afrikaans:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Portuguese (Brazilian):</source>
        <translation type="obsolete">Portugués (Brasileño):</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="397"/>
        <source>Wiki</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="75"/>
        <source>%1 %2 %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="83"/>
        <source>%3-%2-%1 %4 %5</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="135"/>
        <source>Using Ghostscript version %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="137"/>
        <source>No Ghostscript version available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="138"/>
        <source>Build ID:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="177"/>
        <source>Mac OS&amp;#174; X Aqua Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="185"/>
        <source>Windows&amp;#174; Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="205"/>
        <source>Tango Project Icons:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="411"/>
        <source>&amp;Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="415"/>
        <source>Check for &amp;Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="440"/>
        <source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="181"/>
        <source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="202"/>
        <source>Splash Screen:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="436"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="437"/>
        <source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="438"/>
        <source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="439"/>
        <source>The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="138"/>
        <source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../about.cpp" line="138"/>
        <source>Scribus Version</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AboutPlugins</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Yes</source>
        <translation type="obsolete">Sí</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>No</source>
        <translation type="obsolete">No</translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="68"/>
        <source>Filename:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="69"/>
        <source>Version:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="72"/>
        <source>Enabled:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="73"/>
        <source>Release Date:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="80"/>
        <source>Description:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="81"/>
        <source>Author(s):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="82"/>
        <source>Copyright:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.cpp" line="83"/>
        <source>License:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aboutplugins.ui" line="13"/>
        <source>Scribus: About Plug-ins</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AboutPluginsBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>ActionManager</name>
    <message>
        <location filename="../actionmanager.cpp" line="1175"/>
        <source>&amp;New</source>
        <translation type="unfinished">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1176"/>
        <source>&amp;Open...</source>
        <translation type="unfinished">&amp;Abrir...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1177"/>
        <source>&amp;Close</source>
        <translation type="unfinished">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1178"/>
        <source>&amp;Save</source>
        <translation type="unfinished">&amp;Guardar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1179"/>
        <source>Save &amp;As...</source>
        <translation type="unfinished">Gu&amp;ardar como...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1180"/>
        <source>Re&amp;vert to Saved</source>
        <translation type="unfinished">Revertir al guardado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1181"/>
        <source>Collect for O&amp;utput...</source>
        <translation type="unfinished">Rec&amp;olectar para salida...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1182"/>
        <source>Get Text...</source>
        <translation type="unfinished">Cargar texto...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1183"/>
        <source>Append &amp;Text...</source>
        <translation type="unfinished">&amp;Añadir texto...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1184"/>
        <source>Get Image...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1185"/>
        <source>Save &amp;Text...</source>
        <translation type="unfinished">Guardar el &amp;texto...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save Page as &amp;EPS...</source>
        <translation type="obsolete">Guardar la página como &amp;EPS...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1187"/>
        <source>Save as P&amp;DF...</source>
        <translation type="unfinished">Guardar como P&amp;DF...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1188"/>
        <source>Document &amp;Setup...</source>
        <translation type="unfinished">Co&amp;nfiguración del documento...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1190"/>
        <source>&amp;Print...</source>
        <translation type="unfinished">&amp;Imprimir...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1192"/>
        <source>&amp;Quit</source>
        <translation type="unfinished">&amp;Salir</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1194"/>
        <source>&amp;Undo</source>
        <translation type="unfinished">&amp;Deshacer</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1195"/>
        <source>&amp;Redo</source>
        <translation type="unfinished">Re&amp;hacer</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1196"/>
        <source>&amp;Item Action Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1197"/>
        <source>Cu&amp;t</source>
        <translation type="unfinished">Cor&amp;tar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1200"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Copiar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1201"/>
        <source>&amp;Paste</source>
        <translation type="unfinished">&amp;Pegar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C&amp;lear Contents</source>
        <translation type="obsolete">B&amp;orrar contenidos</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1204"/>
        <source>Select &amp;All</source>
        <translation type="unfinished">Seleccionar &amp;todo</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1205"/>
        <source>&amp;Deselect All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1206"/>
        <source>&amp;Search/Replace...</source>
        <translation type="unfinished">&amp;Buscar/Reemplazar...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1207"/>
        <source>Edit Image...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1208"/>
        <source>C&amp;olors...</source>
        <translation type="unfinished">C&amp;olores...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Paragraph Styles...</source>
        <translation type="obsolete">Estilos de &amp;párrafo...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Line Styles...</source>
        <translation type="obsolete">Estilos de &amp;línea...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1211"/>
        <source>&amp;Master Pages...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Javascripts...</source>
        <translation type="obsolete">&amp;JavaScripts...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1189"/>
        <source>P&amp;references...</source>
        <translation type="unfinished">&amp;Preferencias...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1219"/>
        <source>%1 pt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1234"/>
        <source>&amp;Other...</source>
        <translation type="unfinished">&amp;Otro...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1222"/>
        <source>&amp;Left</source>
        <translation type="unfinished">&amp;Izquierda</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1223"/>
        <source>&amp;Center</source>
        <translation type="unfinished">&amp;Centro</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1224"/>
        <source>&amp;Right</source>
        <translation type="unfinished">&amp;Derecha</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1225"/>
        <source>&amp;Block</source>
        <translation type="unfinished">&amp;Justificado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1226"/>
        <source>&amp;Forced</source>
        <translation type="unfinished">&amp;Forzado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1231"/>
        <source>&amp;%1 %</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1235"/>
        <source>&amp;Normal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1236"/>
        <source>&amp;Underline</source>
        <translation type="unfinished">&amp;Subrayado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1237"/>
        <source>Underline &amp;Words</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1238"/>
        <source>&amp;Strike Through</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1239"/>
        <source>&amp;All Caps</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1240"/>
        <source>Small &amp;Caps</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1241"/>
        <source>Su&amp;perscript</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1242"/>
        <source>Su&amp;bscript</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Outline</source>
        <translation type="obsolete">&amp;Esquema</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1244"/>
        <source>S&amp;hadow</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1246"/>
        <source>&amp;Image Effects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1247"/>
        <source>&amp;Tabulators...</source>
        <translation type="unfinished">Ta&amp;buladores...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1250"/>
        <source>D&amp;uplicate</source>
        <translation type="unfinished">&amp;Duplicar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1251"/>
        <source>&amp;Multiple Duplicate</source>
        <translation type="unfinished">Duplicación &amp;múltiple</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1252"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1253"/>
        <source>&amp;Group</source>
        <translation type="unfinished">Agr&amp;upar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1254"/>
        <source>&amp;Ungroup</source>
        <translation type="unfinished">&amp;Desagrupar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1255"/>
        <source>Is &amp;Locked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1256"/>
        <source>Si&amp;ze is Locked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1260"/>
        <source>Lower to &amp;Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1261"/>
        <source>Raise to &amp;Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1262"/>
        <source>&amp;Lower</source>
        <translation type="unfinished">&amp;Bajar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1263"/>
        <source>&amp;Raise</source>
        <translation type="unfinished">&amp;Subir</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1264"/>
        <source>Send to S&amp;crapbook</source>
        <translation type="unfinished">Enviar al Álbu&amp;m de Recortes</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1266"/>
        <source>&amp;Attributes...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1268"/>
        <source>I&amp;mage Visible</source>
        <translation type="unfinished">&amp;Imagen visible</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1269"/>
        <source>&amp;Update Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1270"/>
        <source>Adjust Frame to Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1271"/>
        <source>Extended Image Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1272"/>
        <source>&amp;Low Resolution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1273"/>
        <source>&amp;Normal Resolution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1274"/>
        <source>&amp;Full Resolution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1275"/>
        <source>Is PDF &amp;Bookmark</source>
        <translation type="unfinished">&amp;Marcador PDF</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1276"/>
        <source>Is PDF A&amp;nnotation</source>
        <translation type="unfinished">&amp;Anotación PDF</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1277"/>
        <source>Annotation P&amp;roperties</source>
        <translation type="unfinished">&amp;Propiedades de las Anotaciones</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1278"/>
        <source>Field P&amp;roperties</source>
        <translation type="unfinished">&amp;Propiedades de Campo</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1279"/>
        <source>&amp;Edit Shape...</source>
        <translation type="unfinished">&amp;Editar forma...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1280"/>
        <source>&amp;Attach Text to Path</source>
        <translation type="unfinished">&amp;Adjuntar Texto al Trazado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1281"/>
        <source>&amp;Detach Text from Path</source>
        <translation type="unfinished">&amp;Desadjuntar Texto del Trazado</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1282"/>
        <source>&amp;Combine Polygons</source>
        <translation type="unfinished">&amp;Combinar Polígonos</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1283"/>
        <source>Split &amp;Polygons</source>
        <translation type="unfinished">Dividir &amp;Polígonos</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1355"/>
        <source>&amp;Bezier Curve</source>
        <translation type="unfinished">Curva de &amp;Bézier</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1350"/>
        <source>&amp;Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Outlines</source>
        <translation type="obsolete">&amp;Contorno</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1353"/>
        <source>&amp;Polygon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1349"/>
        <source>&amp;Text Frame</source>
        <translation type="unfinished">Marco de &amp;texto</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1292"/>
        <source>&amp;Glyph...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1293"/>
        <source>Sample Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1297"/>
        <source>&amp;Insert...</source>
        <translation type="unfinished">&amp;Insertar...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1298"/>
        <source>Im&amp;port...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1299"/>
        <source>&amp;Delete...</source>
        <translation type="unfinished">&amp;Borrar...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1300"/>
        <source>&amp;Copy...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1301"/>
        <source>&amp;Move...</source>
        <translation type="unfinished">&amp;Mover...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1302"/>
        <source>&amp;Apply Master Page...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1304"/>
        <source>Manage &amp;Guides...</source>
        <translation type="unfinished">Administrar &amp;Guías...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1305"/>
        <source>Manage Page Properties...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1310"/>
        <source>&amp;50%</source>
        <translation type="unfinished">&amp;50%</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1311"/>
        <source>&amp;75%</source>
        <translation type="unfinished">&amp;75%</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1312"/>
        <source>&amp;100%</source>
        <translation type="unfinished">&amp;100%</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1313"/>
        <source>&amp;200%</source>
        <translation type="unfinished">&amp;200%</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Thumbnails</source>
        <translation type="obsolete">&amp;Miniaturas</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1316"/>
        <source>Show &amp;Margins</source>
        <translation type="unfinished">Mostrar Má&amp;rgenes</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1318"/>
        <source>Show &amp;Frames</source>
        <translation type="unfinished">Mostrar &amp;Marcos</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1320"/>
        <source>Show &amp;Images</source>
        <translation type="unfinished">Mostrar &amp;Imágenes</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1321"/>
        <source>Show &amp;Grid</source>
        <translation type="unfinished">Mostrar &amp;Cuadrícula</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1322"/>
        <source>Show G&amp;uides</source>
        <translation type="unfinished">Mostrar &amp;Guías</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1324"/>
        <source>Show &amp;Baseline Grid</source>
        <translation type="unfinished">Mostrar Líneas de &amp;Base</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1325"/>
        <source>Show &amp;Text Chain</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1326"/>
        <source>Show Control Characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1328"/>
        <source>Rulers relative to Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1329"/>
        <source>Sn&amp;ap to Grid</source>
        <translation type="unfinished">&amp;Ajustar a la Cuadrícula</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1330"/>
        <source>Sna&amp;p to Guides</source>
        <translation type="unfinished">A&amp;justar a las Guías</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1334"/>
        <source>&amp;Properties</source>
        <translation type="unfinished">&amp;Propiedades</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1336"/>
        <source>&amp;Scrapbook</source>
        <translation type="unfinished">Álb&amp;um de recortes</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1337"/>
        <source>&amp;Layers</source>
        <translation type="unfinished">&amp;Capas</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1338"/>
        <source>&amp;Arrange Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1339"/>
        <source>&amp;Bookmarks</source>
        <translation type="unfinished">&amp;Marcadores</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1340"/>
        <source>&amp;Measurements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1341"/>
        <source>Action &amp;History</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1342"/>
        <source>Preflight &amp;Verifier</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1343"/>
        <source>&amp;Align and Distribute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1344"/>
        <source>&amp;Tools</source>
        <translation type="unfinished">&amp;Herramientas</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1345"/>
        <source>P&amp;DF Tools</source>
        <translation type="unfinished">Herramientas de P&amp;DF</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1348"/>
        <source>Select Item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1351"/>
        <source>T&amp;able</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1352"/>
        <source>&amp;Shape</source>
        <translation type="unfinished">&amp;Forma</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1354"/>
        <source>&amp;Line</source>
        <translation type="unfinished">&amp;Linea</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1356"/>
        <source>&amp;Freehand Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1357"/>
        <source>Rotate Item</source>
        <translation type="unfinished">Rotar objeto</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1358"/>
        <source>Zoom in or out</source>
        <translation type="unfinished">Acercar o alejar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1359"/>
        <source>Zoom in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1360"/>
        <source>Zoom out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1361"/>
        <source>Edit Contents of Frame</source>
        <translation type="unfinished">Editar contenidos del marco</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1362"/>
        <source>Edit Text...</source>
        <translation type="unfinished">&amp;Editar texto...</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1363"/>
        <source>Link Text Frames</source>
        <translation type="unfinished">Enlazar marcos de texto</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1364"/>
        <source>Unlink Text Frames</source>
        <translation type="unfinished">Desenlazar marcos de texto</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1365"/>
        <source>&amp;Eye Dropper</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1366"/>
        <source>Copy Item Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1368"/>
        <source>Edit the text with the Story Editor</source>
        <translation type="unfinished">Editar el texto con el editor interno</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1370"/>
        <source>Insert Text Frame</source>
        <translation type="unfinished">Insertar marco de texto</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1371"/>
        <source>Insert Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1372"/>
        <source>Insert Table</source>
        <translation type="unfinished">Insertar tabla</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1373"/>
        <source>Insert Shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1374"/>
        <source>Insert Polygon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1375"/>
        <source>Insert Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1376"/>
        <source>Insert Bezier Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1377"/>
        <source>Insert Freehand Line</source>
        <translation type="unfinished">Insertar linea a mano alzada</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1389"/>
        <source>&amp;Manage Pictures</source>
        <translation type="unfinished">Ad&amp;ministrar imágenes</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1390"/>
        <source>&amp;Hyphenate Text</source>
        <translation type="unfinished">&amp;Dividir en sílabas</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1391"/>
        <source>Dehyphenate Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1392"/>
        <source>&amp;Generate Table Of Contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1399"/>
        <source>&amp;About Scribus</source>
        <translation type="unfinished">&amp;Acerca de Scribus</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1401"/>
        <source>About &amp;Qt</source>
        <translation type="unfinished">Acerca de &amp;Qt</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1402"/>
        <source>Toolti&amp;ps</source>
        <translation type="unfinished">Ayuda &amp;emergente</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1403"/>
        <source>Scribus &amp;Manual...</source>
        <translation type="unfinished">&amp;Manual de Scribus</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1415"/>
        <source>Smart &amp;Hyphen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1416"/>
        <source>Non Breaking Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1417"/>
        <source>Non Breaking &amp;Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1418"/>
        <source>Page &amp;Number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1465"/>
        <source>New Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1466"/>
        <source>Frame Break</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1467"/>
        <source>Column Break</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1424"/>
        <source>Copyright</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1425"/>
        <source>Registered Trademark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1426"/>
        <source>Trademark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1428"/>
        <source>Bullet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1430"/>
        <source>Em Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1431"/>
        <source>En Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1432"/>
        <source>Figure Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1433"/>
        <source>Quotation Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1406"/>
        <source>Toggle Palettes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1407"/>
        <source>Toggle Guides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1191"/>
        <source>Print Previe&amp;w</source>
        <translation type="unfinished">Pre&amp;visualizar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1212"/>
        <source>&amp;JavaScripts...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1303"/>
        <source>Convert to Master Page...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1395"/>
        <source>&amp;Cascade</source>
        <translation type="unfinished">&amp;Cascada</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1396"/>
        <source>&amp;Tile</source>
        <translation type="unfinished">&amp;Mosaico</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1400"/>
        <source>&amp;About Plug-ins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1267"/>
        <source>More Info...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1257"/>
        <source>&amp;Printing Enabled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1258"/>
        <source>&amp;Flip Horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1259"/>
        <source>&amp;Flip Vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1327"/>
        <source>Show Rulers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1335"/>
        <source>&amp;Outline</source>
        <comment>Document Outline Palette</comment>
        <translation type="unfinished">&amp;Esquema</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1427"/>
        <source>Solidus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1429"/>
        <source>Middle Dot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1454"/>
        <source>En Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1455"/>
        <source>Em Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1456"/>
        <source>Thin Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1457"/>
        <source>Thick Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1458"/>
        <source>Mid Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1459"/>
        <source>Hair Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1461"/>
        <source>Insert Smart Hyphen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1462"/>
        <source>Insert Non Breaking Dash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1463"/>
        <source>Insert Non Breaking Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1464"/>
        <source>Insert Page Number</source>
        <translation type="unfinished">Insertar Número de Página</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1471"/>
        <source>ff</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1472"/>
        <source>fi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1473"/>
        <source>fl</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1474"/>
        <source>ffi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1475"/>
        <source>ffl</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1476"/>
        <source>ft</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1477"/>
        <source>st</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1210"/>
        <source>S&amp;tyles...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1243"/>
        <source>&amp;Outline</source>
        <comment>type effect</comment>
        <translation type="unfinished">&amp;Esquema</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1286"/>
        <source>&amp;Outlines</source>
        <comment>Convert to oulines</comment>
        <translation type="unfinished">&amp;Contorno</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1202"/>
        <source>Paste (&amp;Absolute)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1203"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1379"/>
        <source>Insert PDF Push Button</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1380"/>
        <source>Insert PDF Text Field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1381"/>
        <source>Insert PDF Check Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1382"/>
        <source>Insert PDF Combo Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1383"/>
        <source>Insert PDF List Box</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1384"/>
        <source>Insert Text Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1385"/>
        <source>Insert Link Annotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1186"/>
        <source>Save as &amp;EPS...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1323"/>
        <source>Show Text Frame Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1291"/>
        <source>&amp;Frame...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1315"/>
        <source>Preview Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1319"/>
        <source>Show Layer Indicators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1209"/>
        <source>Patterns...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1265"/>
        <source>Send to Patterns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1294"/>
        <source>Sticky Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1308"/>
        <source>&amp;Fit to Height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1309"/>
        <source>Fit to Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1317"/>
        <source>Show Bleeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1468"/>
        <source>&amp;Zero Width Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1469"/>
        <source>Zero Width NB Space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1435"/>
        <source>Apostrophe</source>
        <comment>Unicode 0x0027</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1436"/>
        <source>Straight Double</source>
        <comment>Unicode 0x0022</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1437"/>
        <source>Single Left</source>
        <comment>Unicode 0x2018</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1438"/>
        <source>Single Right</source>
        <comment>Unicode 0x2019</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1439"/>
        <source>Double Left</source>
        <comment>Unicode 0x201C</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1440"/>
        <source>Double Right</source>
        <comment>Unicode 0x201D</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1441"/>
        <source>Single Reversed</source>
        <comment>Unicode 0x201B</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1442"/>
        <source>Double Reversed</source>
        <comment>Unicode 0x201F</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1443"/>
        <source>Single Left Guillemet</source>
        <comment>Unicode 0x2039</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1444"/>
        <source>Single Right Guillemet</source>
        <comment>Unicode 0x203A</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1445"/>
        <source>Double Left Guillemet</source>
        <comment>Unicode 0x00AB</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1446"/>
        <source>Double Right Guillemet</source>
        <comment>Unicode 0x00BB</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1447"/>
        <source>Low Single Comma</source>
        <comment>Unicode 0x201A</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1448"/>
        <source>Low Double Comma</source>
        <comment>Unicode 0x201E</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1449"/>
        <source>CJK Single Left</source>
        <comment>Unicode 0x300C</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1450"/>
        <source>CJK Single Right</source>
        <comment>Unicode 0x300D</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1451"/>
        <source>CJK Double Left</source>
        <comment>Unicode 0x300E</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1452"/>
        <source>CJK Double Right</source>
        <comment>Unicode 0x300F</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1314"/>
        <source>&amp;400%</source>
        <translation type="unfinished">&amp;100% {400%?}</translation>
    </message>
</context>
<context>
    <name>AdvOptions</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Advanced Options</source>
        <translation type="obsolete">Opciones Avanzadas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Mirror Page(s) &amp;Horizontal</source>
        <translation type="obsolete">Voltear página(s) &amp;horizontalmente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Mirror Page(s) &amp;Vertical</source>
        <translation type="obsolete">Voltear página(s) &amp;verticalmente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply Under Color &amp;Removal</source>
        <translation type="obsolete">Aplicar &amp;eliminación del color subyacente (UCR)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply &amp;ICC Profiles</source>
        <translation type="obsolete">Aplicar perfiles &amp;ICC</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>PostScript Level &amp;1</source>
        <translation type="obsolete">PostScript Nivel &amp;1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>PostScript Level &amp;2</source>
        <translation type="obsolete">PostScript Nivel &amp;2</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>PostScript Level &amp;3</source>
        <translation type="obsolete">PostScript Nivel &amp;3</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Creates PostScript Level 3</source>
        <translation type="obsolete">Crea PostScript Nivel 3</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Creates PostScript Level 2 only, beware,
this can create huge files</source>
        <translation type="obsolete">Crea PostScript Nivel 2 solamente, ten en
cuenta que puede crear archivos enormes.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Creates PostScript Level 1 only, beware,
this can create huge files</source>
        <translation type="obsolete">Crea PostScript Nivel 1 solamente, ten en
cuenta que puede crear archivos enormes.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A way of switching off some of the gray shades which are composed
of cyan, yellow and magenta and using black instead.
UCR most affects parts of images which are neutral and/or dark tones
which are close to the gray. Use of this may improve printing some images
and some experimentation and testing is need on a case by case basis.
UCR reduces the possibility of over saturation with CMY inks.</source>
        <translation type="obsolete">Una forma de desactivar algunas de las saturaciones grises que están compuestas
de cian, amarillo y magenta y en lugar de eso usar negro.
UCR afecta en su mayoría a partes de images que son de tonos neutrales u
oscuros cercanos al gris. Esto puede mejorar la impresión de algunas imágenes
y se necesita hacer pruebas en cada caso.
UCR reduce la posibilidad de sobresaturación con tintas CMY (cian, magenta, amarillo).</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Set Media Size</source>
        <translation type="obsolete">Establecer Tamaño del Medio</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>This enables you to explicitely set,
the media size of the postscript file.
Not recommended unless
 requested by your printer.</source>
        <translation type="obsolete">Te permite establecer explícitamente, 
el tamaño del medio del archivo postscript. 
No recomendado a menos que 
lo pida tu impresora.</translation>
    </message>
</context>
<context>
    <name>Align</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Distribute/Align</source>
        <translation type="obsolete">Distribuir/Alinear</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Align</source>
        <translation type="obsolete">Alinear</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Horizontal</source>
        <translation type="obsolete">Horizontal</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Left Sides</source>
        <translation type="obsolete">Lados izquierdos</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Middles</source>
        <translation type="obsolete">Centro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Right Sides</source>
        <translation type="obsolete">Lados derechos</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Between:</source>
        <translation type="obsolete">&amp;Entre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Do Not Change</source>
        <translation type="obsolete">&amp;No cambiar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A&amp;lign</source>
        <translation type="obsolete">A&amp;linear</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Di&amp;splacement</source>
        <translation type="obsolete">&amp;Desplazamiento</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Distribute &amp;Evenly</source>
        <translation type="obsolete">Distribuir e&amp;quitativamente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Vertical</source>
        <translation type="obsolete">Vertical</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Top Sides</source>
        <translation type="obsolete">Lados superiores</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Bottom Sides</source>
        <translation type="obsolete">Lados inferiores</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Bet&amp;ween:</source>
        <translation type="obsolete">En&amp;tre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Do &amp;Not Change</source>
        <translation type="obsolete">N&amp;o cambiar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Al&amp;ign</source>
        <translation type="obsolete">Al&amp;inear</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Dis&amp;placement</source>
        <translation type="obsolete">De&amp;splazamiento</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Distribute E&amp;venly</source>
        <translation type="obsolete">Distribuir eq&amp;uitativamente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Apply</source>
        <translation type="obsolete">A&amp;plicar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
</context>
<context>
    <name>AlignDistribute</name>
    <message>
        <location filename="../aligndistribute.ui" line="35"/>
        <source>Align</source>
        <translation type="unfinished">Alinear</translation>
    </message>
    <message>
        <location filename="../aligndistribute.ui" line="79"/>
        <source>&amp;Selected Guide:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.ui" line="92"/>
        <source>&amp;Relative To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.ui" line="431"/>
        <source>...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.ui" line="270"/>
        <source>Distribute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.ui" line="490"/>
        <source>&amp;Distance:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignDistributeBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Align</source>
        <translation type="obsolete">Alinear</translation>
    </message>
</context>
<context>
    <name>AlignDistributePalette</name>
    <message>
        <location filename="../aligndistribute.cpp" line="81"/>
        <source>Align and Distribute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="82"/>
        <source>Align</source>
        <translation type="unfinished">Alinear</translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="84"/>
        <source>&amp;Relative to:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="87"/>
        <source>First Selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="88"/>
        <source>Last Selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="89"/>
        <source>Page</source>
        <translation type="unfinished">Página</translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="90"/>
        <source>Margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="91"/>
        <source>Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="92"/>
        <source>Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="100"/>
        <source>Align bottoms</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="102"/>
        <source>Align right sides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="106"/>
        <source>Center on vertical axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="108"/>
        <source>Align left sides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="110"/>
        <source>Center on horizontal axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="114"/>
        <source>Align tops</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="116"/>
        <source>&amp;Selected Guide:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="124"/>
        <source>Distribute right sides equidistantly</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="126"/>
        <source>Distribute bottoms equidistantly</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="128"/>
        <source>Distribute centers equidistantly horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="134"/>
        <source>Distribute left sides equidistantly</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="136"/>
        <source>Distribute centers equidistantly vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="138"/>
        <source>Distribute tops equidistantly</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="148"/>
        <source>&amp;Distance:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="149"/>
        <source>Distribute the items with the distance specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="151"/>
        <source>None Selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="431"/>
        <source>Y: %1%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="439"/>
        <source>X: %1%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="96"/>
        <source>Align right sides of items to left side of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="98"/>
        <source>Align left sides of items to right side of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="104"/>
        <source>Align tops of items to bottom of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="112"/>
        <source>Align bottoms of items to top of anchor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="119"/>
        <source>Make horizontal gaps between items equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="121"/>
        <source>Make horizontal gaps between items equal to the value specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="130"/>
        <source>Make vertical gaps between items equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="132"/>
        <source>Make vertical gaps between items equal to the value specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="140"/>
        <source>Make horizontal gaps between items and sides of page equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="146"/>
        <source>Make vertical gaps between items and the top and bottom of page margins equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="144"/>
        <source>Make horizontal gaps between items and sides of page margins equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="142"/>
        <source>Make vertical gaps between items and the top and bottom of page equal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../aligndistribute.cpp" line="83"/>
        <source>Distribute</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignSelect</name>
    <message>
        <location filename="../alignselect.cpp" line="101"/>
        <source>Align Text Left</source>
        <translation>Alinear Texto a la Izquierda</translation>
    </message>
    <message>
        <location filename="../alignselect.cpp" line="102"/>
        <source>Align Text Right</source>
        <translation>Alinear Texto a la Derecha</translation>
    </message>
    <message>
        <location filename="../alignselect.cpp" line="103"/>
        <source>Align Text Center</source>
        <translation>Centrar Texto</translation>
    </message>
    <message>
        <location filename="../alignselect.cpp" line="104"/>
        <source>Align Text Justified</source>
        <translation>Justificar Texto</translation>
    </message>
    <message>
        <location filename="../alignselect.cpp" line="105"/>
        <source>Align Text Forced Justified</source>
        <translation>Justificación forzada del Texto</translation>
    </message>
</context>
<context>
    <name>Annot</name>
    <message>
        <location filename="../annot.cpp" line="59"/>
        <source>Field Properties</source>
        <translation>Propiedades de campo</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="532"/>
        <source>Type:</source>
        <translation>Tipo:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="94"/>
        <source>Button</source>
        <translation>Botón</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="94"/>
        <source>Text Field</source>
        <translation>Campo de texto</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="94"/>
        <source>Check Box</source>
        <translation>Casilla de selección</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="94"/>
        <source>Combo Box</source>
        <translation>Cuadro combinado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="94"/>
        <source>List Box</source>
        <translation>Lista</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="109"/>
        <source>Properties</source>
        <translation>Propiedades</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="119"/>
        <source>Name:</source>
        <translation>Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Tool-Tip:</source>
        <translation type="obsolete">Consejo:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="273"/>
        <source>Text</source>
        <translation>Texto</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="150"/>
        <source>Font for use with PDF 1.3:</source>
        <translation>Fuente a usar para PDF-1.3:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="174"/>
        <source>Border</source>
        <translation>Borde</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="180"/>
        <source>Color:</source>
        <translation>Color:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2077"/>
        <source>None</source>
        <translation>Ninguno</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="196"/>
        <source>Width:</source>
        <translation>Anchura:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="200"/>
        <source>Thin</source>
        <translation>Delgado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="310"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="200"/>
        <source>Wide</source>
        <translation>Ancho</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="208"/>
        <source>Style:</source>
        <translation>Estilo:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="212"/>
        <source>Solid</source>
        <translation>Sólido</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="212"/>
        <source>Dashed</source>
        <translation>A trazos</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="212"/>
        <source>Underline</source>
        <translation>Subrayado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="213"/>
        <source>Beveled</source>
        <translation>Biselado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="213"/>
        <source>Inset</source>
        <translation>Recuadro</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="223"/>
        <source>Other</source>
        <translation>Otro</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="229"/>
        <source>Read Only</source>
        <translation>Sólo Lectura</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="235"/>
        <source>Required</source>
        <translation>Requerido</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Don&apos;t Export Value</source>
        <translation type="obsolete">No exportar valor</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="247"/>
        <source>Visibility:</source>
        <translation>Visibilidad:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="251"/>
        <source>Visible</source>
        <translation>Visible</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="251"/>
        <source>Hidden</source>
        <translation>Oculto</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="251"/>
        <source>No Print</source>
        <translation>No Imprimir</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="252"/>
        <source>No View</source>
        <translation>No Mostrar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="261"/>
        <source>Appearance</source>
        <translation>Apariencia</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="279"/>
        <source>Text for Button Down</source>
        <translation>Texto al Presionar el Botón</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="282"/>
        <source>Text for Roll Over</source>
        <translation>Texto al Pasar por Encima</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="293"/>
        <source>Icons</source>
        <translation>Iconos</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="299"/>
        <source>Use Icons</source>
        <translation>Usar Iconos</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="356"/>
        <source>Remove</source>
        <translation>Borrar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="328"/>
        <source>Pressed</source>
        <translation>Pulsado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="346"/>
        <source>Roll Over</source>
        <translation>Cursor encima</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="365"/>
        <source>Icon Placement...</source>
        <translation>Disposición del icono...</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="413"/>
        <source>Highlight</source>
        <translation>Realzar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="420"/>
        <source>Invert</source>
        <translation>Invertir</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="420"/>
        <source>Outlined</source>
        <translation>Contorneado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="420"/>
        <source>Push</source>
        <translation>Pulsar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="437"/>
        <source>Multi-Line</source>
        <translation>Multilínea</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="441"/>
        <source>Password</source>
        <translation>Contraseña</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="448"/>
        <source>Limit of</source>
        <translation>Límite de</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="459"/>
        <source>Characters</source>
        <translation>caracteres</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="465"/>
        <source>Do Not Scroll</source>
        <translation>No desplazar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="469"/>
        <source>Do Not Spell Check</source>
        <translation>No revisar ortografía</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="484"/>
        <source>Check Style:</source>
        <translation>Estilo de marca:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Check</source>
        <translation>V</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Cross</source>
        <translation>Cruz</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Diamond</source>
        <translation>Diamante</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Circle</source>
        <translation>Círculo</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Star</source>
        <translation>Estrella</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="487"/>
        <source>Square</source>
        <translation>Cuadrado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="501"/>
        <source>Default is Checked</source>
        <translation>Seleccionada por defecto</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="513"/>
        <source>Editable</source>
        <translation>Editable</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="520"/>
        <source>Options</source>
        <translation>Opciones</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Java Script</source>
        <translation type="obsolete">Java Script</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2040"/>
        <source>Go To</source>
        <translation>Ir a</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2041"/>
        <source>Submit Form</source>
        <translation>Enviar formulario</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2041"/>
        <source>Reset Form</source>
        <translation>Reiniciar formulario</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2041"/>
        <source>Import Data</source>
        <translation>Importar datos</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="569"/>
        <source>Event:</source>
        <translation>Evento:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2020"/>
        <source>Mouse Up</source>
        <translation>Se suelta el ratón</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2020"/>
        <source>Mouse Down</source>
        <translation>Se presiona el ratón</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2020"/>
        <source>Mouse Enter</source>
        <translation>El cursor entra</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2021"/>
        <source>Mouse Exit</source>
        <translation>El cursor sale</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2021"/>
        <source>On Focus</source>
        <translation>Se obtiene el foco</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2021"/>
        <source>On Blur</source>
        <translation>Se pierde el foco</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="584"/>
        <source>Script:</source>
        <translation>Script:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1088"/>
        <source>Edit...</source>
        <translation>Editar...</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="663"/>
        <source>Submit to URL:</source>
        <translation>Enviar a URL:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="671"/>
        <source>Submit Data as HTML</source>
        <translation>Enviar dato como HTML</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="684"/>
        <source>Import Data from:</source>
        <translation>Importar datos desde:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="609"/>
        <source>Destination</source>
        <translation>Destino</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="615"/>
        <source>To File:</source>
        <translation>A archivo:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="622"/>
        <source>Change...</source>
        <translation>Cambiar...</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="625"/>
        <source>Page:</source>
        <translation>Página:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="639"/>
        <source>X-Pos:</source>
        <translation>Posición X:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="651"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="647"/>
        <source>Y-Pos:</source>
        <translation>Posición Y:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="693"/>
        <source>Action</source>
        <translation>Acción</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="724"/>
        <source>Field is formatted as:</source>
        <translation>Campo formateado como:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Plain</source>
        <translation>Sin formato</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Number</source>
        <translation>Número</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Percentage</source>
        <translation>Porcentaje</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Date</source>
        <translation>Fecha</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Time</source>
        <translation>Hora</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="727"/>
        <source>Custom</source>
        <translation>Personalizado</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="745"/>
        <source>Number Format</source>
        <translation>Formato de Número</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="813"/>
        <source>Decimals:</source>
        <translation>Decimales:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="768"/>
        <source>Use Currency Symbol</source>
        <translation>Usar Símbolo de Moneda</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="777"/>
        <source>Prepend Currency Symbol</source>
        <translation>Símbolo de Moneda Delante</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="824"/>
        <source>Formatting</source>
        <translation>Formato</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="804"/>
        <source>Percent Format</source>
        <translation>Formato de Porcentaje</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="847"/>
        <source>Date Format</source>
        <translation>Formato de Fecha</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="873"/>
        <source>Time Format</source>
        <translation>Formato de Hora</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="895"/>
        <source>Custom Scripts</source>
        <translation>Scripts Propios</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="907"/>
        <source>Format:</source>
        <translation>Formato:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="933"/>
        <source>Keystroke:</source>
        <translation>Pulsación:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="957"/>
        <source>Format</source>
        <translation>Formato</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="973"/>
        <source>Value is not validated</source>
        <translation>El valor no se valida</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="982"/>
        <source>Value must be greater than or equal to:</source>
        <translation>El valor debe ser mayor o igual que:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="986"/>
        <source>and less or equal to:</source>
        <translation>y menor o igual que:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="997"/>
        <source>Custom validate script:</source>
        <translation>Script propio de validación:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1018"/>
        <source>Validate</source>
        <translation>Validar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1035"/>
        <source>Value is not calculated</source>
        <translation>El valor no se calcula</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1044"/>
        <source>Value is the</source>
        <translation>Valor es el</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1049"/>
        <source>sum</source>
        <translation>total</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1049"/>
        <source>product</source>
        <translation>producto</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1049"/>
        <source>average</source>
        <translation>promedio</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1049"/>
        <source>minimum</source>
        <translation>mínimo</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1050"/>
        <source>maximum</source>
        <translation>máximo</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1057"/>
        <source>of the following fields:</source>
        <translation>de los siguientes campos:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1067"/>
        <source>Pick...</source>
        <translation>Elegir...</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1072"/>
        <source>Custom calculation script:</source>
        <translation>Script de cálculo propio:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1092"/>
        <source>Calculate</source>
        <translation>Calcular</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1111"/>
        <source>OK</source>
        <translation>Aceptar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1115"/>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1167"/>
        <source>Flag is ignored for PDF 1.3</source>
        <translation>Opción ignorada por PDF 1.3</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1168"/>
        <source>Enter a comma separated list of fields here</source>
        <translation>Introducir aquí una lista de campos separados por comas</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1169"/>
        <source>You need at least the Icon for Normal to use Icons for Buttons</source>
        <translation>Se necesita como mínimo el icono Normal para usar iconos en los botones</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2231"/>
        <source>Open</source>
        <translation>Abrir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;All Files (*)</source>
        <translation type="obsolete">Imágenes (*.tif *.png *.jpg *.xpm);;Postscript (*.eps);;Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1446"/>
        <source>Example:</source>
        <translation>Ejemplo:</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2069"/>
        <source>Selection Change</source>
        <translation>Se cambia la selección</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2231"/>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation>Archivos PDF (*.pdf);;Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2078"/>
        <source>JavaScript</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="420"/>
        <source>None</source>
        <comment>highlight</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="2040"/>
        <source>None</source>
        <comment>action</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="132"/>
        <source>Tooltip:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="241"/>
        <source>Do Not Export Value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../annot.cpp" line="1335"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Annota</name>
    <message>
        <location filename="../annota.cpp" line="46"/>
        <source>Annotation Properties</source>
        <translation>Propiedades de Anotación</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="76"/>
        <source>Text</source>
        <translation>Texto</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="76"/>
        <source>Link</source>
        <translation>Enlace</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="76"/>
        <source>External Link</source>
        <translation>Enlace externo</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="77"/>
        <source>External Web-Link</source>
        <translation>Enlace web externo</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="82"/>
        <source>&amp;Type:</source>
        <translation>&amp;Tipo:</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="99"/>
        <source>Destination</source>
        <translation>Destino</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="110"/>
        <source>C&amp;hange...</source>
        <translation>Cam&amp;biar...</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="121"/>
        <source>&amp;Page:</source>
        <translation>&amp;Página:</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="149"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="144"/>
        <source>&amp;X-Pos</source>
        <translation>Posición &amp;X:</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="151"/>
        <source>&amp;Y-Pos:</source>
        <translation>Posicón &amp;Y:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="351"/>
        <source>Open</source>
        <translation>Abrir</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="351"/>
        <source>PDF-Documents (*.pdf);;All Files (*)</source>
        <translation>Documentos PDF (*.pdf);; Todos los archivos (*)</translation>
    </message>
</context>
<context>
    <name>ApplyMasterPageDialog</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="260"/>
        <source>Apply Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="261"/>
        <source>&amp;Master Page:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="262"/>
        <source>Apply To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="263"/>
        <source>Current &amp;page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="264"/>
        <source>Alt+P</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="265"/>
        <source>&amp;Even pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="266"/>
        <source>Alt+E</source>
        <translation type="unfinished">Alt+E</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="267"/>
        <source>O&amp;dd pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="268"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="269"/>
        <source>&amp;All pages</source>
        <translation type="unfinished">Todas las &amp;Páginas</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="270"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="271"/>
        <source>&amp;Within range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="272"/>
        <source>Alt+W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="274"/>
        <source>to</source>
        <translation type="unfinished">a</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="276"/>
        <source>Alt+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="278"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="273"/>
        <source>Apply the selected master page to even, odd or all pages within the following range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../applytemplatedialog.cpp" line="51"/>
        <source>Possible Hyphenation</source>
        <translation type="unfinished">Posible División</translation>
    </message>
</context>
<context>
    <name>ApplyT</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply Template</source>
        <translation type="obsolete">Aplicar Plantilla</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Template:</source>
        <translation type="obsolete">&amp;Plantilla:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply to &amp;Current Page</source>
        <translation type="obsolete">Aplicar a la página ac&amp;tual</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply to all &amp;even Pages</source>
        <translation type="obsolete">Aplicar a todas las páginas &amp;pares</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply to all &amp;odd Pages</source>
        <translation type="obsolete">Aplicar a todas las páginas &amp;impares</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Apply from &amp;Page:</source>
        <translation type="obsolete">Aplicar &amp;desde la página:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>To:</source>
        <translation type="obsolete">Hasta:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
</context>
<context>
    <name>ArrowChooser</name>
    <message>
        <location filename="../arrowchooser.cpp" line="33"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
</context>
<context>
    <name>Barcode</name>
    <message>
        <location filename="../plugins/barcodegenerator/barcode.cpp" line="22"/>
        <source>&amp;Barcode Generator...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcode.cpp" line="37"/>
        <source>Scribus frontend for Pure Postscript Barcode Writer</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGenerator</name>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="285"/>
        <source>Error opening file: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="39"/>
        <source>12 or 13 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
        <source>8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
        <source>11 or 12 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
        <source>7 or 8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
        <source>5 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
        <source>2 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="56"/>
        <source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="65"/>
        <source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="68"/>
        <source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="76"/>
        <source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="91"/>
        <source>Variable number of digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="87"/>
        <source>Variable number of digits and capital letters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="96"/>
        <source>Variable number of hexadecimal characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="316"/>
        <source>Barcode incomplete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.cpp" line="52"/>
        <source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGeneratorBase</name>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
        <source>Barcode Creator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="193"/>
        <source>Barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="311"/>
        <source>&amp;Type:</source>
        <translation type="unfinished">&amp;Tipo:</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="304"/>
        <source>Select one of the available barcode type here</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="284"/>
        <source>The numeric representation of the code itself. See the help message below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="274"/>
        <source>Reset the barcode samples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="247"/>
        <source>&amp;Include text in barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="250"/>
        <source>Alt+I</source>
        <translation type="unfinished">Alt+I</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="244"/>
        <source>If checked, there will be numbers in the barcode too</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="234"/>
        <source>&amp;Guard whitespace</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
        <source>Alt+G</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="231"/>
        <source>Draw arrows to be sure of space next the code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="30"/>
        <source>Colors</source>
        <translation type="unfinished">Colores</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="58"/>
        <source>&amp;Background</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="61"/>
        <source>Alt+B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="55"/>
        <source>Background color - under the code lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
        <source>&amp;Lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="93"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="87"/>
        <source>Color of the lines in barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="122"/>
        <source>&amp;Text</source>
        <translation type="unfinished">&amp;Texto</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="125"/>
        <source>Alt+T</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="119"/>
        <source>Color of the text and numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="154"/>
        <source>Hints and help is shown here</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="164"/>
        <source>Preview of the result. 72dpi sample.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="291"/>
        <source>Co&amp;de:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="221"/>
        <source>I&amp;nclude checksum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="224"/>
        <source>Alt+N</source>
        <translation type="unfinished">Alt+N</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="218"/>
        <source>Generate and include a checksum in barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
        <source>Incl&amp;ude checksum digit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="211"/>
        <source>Alt+U</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
        <source>Include the checksum digit in the barcode text</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Biblio</name>
    <message>
        <location filename="../scrap.cpp" line="1341"/>
        <source>Scrapbook</source>
        <translation>Álbum de recortes</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Load...</source>
        <translation type="obsolete">C&amp;argar...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;Guardar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save &amp;As...</source>
        <translation type="obsolete">Gu&amp;ardar como...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Small</source>
        <translation type="obsolete">&amp;Pequeño</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Medium</source>
        <translation type="obsolete">&amp;Mediano</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Large</source>
        <translation type="obsolete">&amp;Grande</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;File</source>
        <translation type="obsolete">&amp;Archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Preview</source>
        <translation type="obsolete">&amp;Previsualizar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scrapbooks (*.scs);;All Files (*)</source>
        <translation type="obsolete">Álbum de recortes (*.scs);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="826"/>
        <source>Rename</source>
        <translation>Renombrar</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="828"/>
        <source>Delete</source>
        <translation>Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Name &quot;%1&quot; isn&apos;t unique.
Please choose another.</source>
        <translation type="obsolete">El nombre &quot;%1&quot; no es único.
Por favor elige otro.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1244"/>
        <source>Object</source>
        <translation>Objeto</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1153"/>
        <source>&amp;Name:</source>
        <translation>&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1153"/>
        <source>New Entry</source>
        <translation>Nueva entrada</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1047"/>
        <source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="712"/>
        <source>Choose a Scrapbook Directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="770"/>
        <source>Choose a Directory</source>
        <translation type="unfinished">Elige un directorio</translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="747"/>
        <source>Scrapbook (*.scs)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="750"/>
        <source>Choose a scrapbook file to import</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1342"/>
        <source>Create a new scrapbook page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1343"/>
        <source>Load an existing scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1344"/>
        <source>Save the selected scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1345"/>
        <source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1346"/>
        <source>Close the selected scrapbook</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="833"/>
        <source>Copy To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="834"/>
        <source>Move To:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="580"/>
        <source>Main</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="582"/>
        <source>Copied Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../scrap.cpp" line="1040"/>
        <source>New Name</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BookMView</name>
    <message>
        <location filename="../bookmwin.cpp" line="554"/>
        <source>Bookmarks</source>
        <translation>Marcadores</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="219"/>
        <source>Move Bookmark</source>
        <translation>Mover Marcador</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="220"/>
        <source>Insert Bookmark</source>
        <translation>Insertar Marcador</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="221"/>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
</context>
<context>
    <name>BookPalette</name>
    <message>
        <location filename="../bookpalette.cpp" line="39"/>
        <source>Bookmarks</source>
        <translation>Marcadores</translation>
    </message>
</context>
<context>
    <name>ButtonIcon</name>
    <message>
        <location filename="../buttonicon.cpp" line="30"/>
        <source>Icon Placement</source>
        <translation>Disposición del icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="39"/>
        <source>Layout:</source>
        <translation>Disposición:</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="42"/>
        <source>Caption only</source>
        <translation>Sólo texto</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="42"/>
        <source>Icon only</source>
        <translation>Sólo icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="42"/>
        <source>Caption below Icon</source>
        <translation>Texto debajo del icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="42"/>
        <source>Caption above Icon</source>
        <translation>Texto encima del icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="43"/>
        <source>Caption right to Icon</source>
        <translation>Texto a la derecha del icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="43"/>
        <source>Caption left to Icon</source>
        <translation>Texto a la izquierda del icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="43"/>
        <source>Caption overlays Icon</source>
        <translation>Texto superpuesto al icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="51"/>
        <source>Scale:</source>
        <translation>Escalado:</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="56"/>
        <source>Always</source>
        <translation>Siempre</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="56"/>
        <source>When Icon is too small</source>
        <translation>Cuando el icono es demasiado pequeño</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="57"/>
        <source>When Icon is too big</source>
        <translation>Cuando el icono es demasiado grande</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="57"/>
        <source>Never</source>
        <translation>Nunca</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="64"/>
        <source>Scale How:</source>
        <translation>Modo de escalado:</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="67"/>
        <source>Proportional</source>
        <translation>Proporcional</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="68"/>
        <source>Non Proportional</source>
        <translation>No proporcional</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="91"/>
        <source>Icon</source>
        <translation>Icono</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="118"/>
        <source>OK</source>
        <translation>Aceptar</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="122"/>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
    <message>
        <location filename="../buttonicon.cpp" line="125"/>
        <source>Reset</source>
        <translation>Reiniciar</translation>
    </message>
</context>
<context>
    <name>CMSPrefs</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Color Management Settings</source>
        <translation type="obsolete">Configuración de los Ajustes de Color</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="28"/>
        <source>&amp;Activate Color Management</source>
        <translation>Ac&amp;tivar Ajustes de Color</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="31"/>
        <source>System Profiles</source>
        <translation>Perfiles del Sistema</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Pictures:</source>
        <translation type="obsolete">&amp;Imágenes:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Solid Colors:</source>
        <translation type="obsolete">Colores &amp;Sólidos:</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="68"/>
        <source>&amp;Monitor:</source>
        <translation>&amp;Monitor:</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="75"/>
        <source>P&amp;rinter:</source>
        <translation>Im&amp;presora:</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="80"/>
        <source>Rendering Intents</source>
        <translation>Modos de Visualización</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="194"/>
        <source>Perceptual</source>
        <translation>Perceptivo</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="195"/>
        <source>Saturation</source>
        <translation>Saturación</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>M&amp;onitor:</source>
        <translation type="obsolete">M&amp;onitor:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Pr&amp;inter:</source>
        <translation type="obsolete">Imp&amp;resora:</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="102"/>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation>Sim&amp;ular impresora en la pantalla</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="119"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation>Indicar colores fuera de &amp;gama</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="123"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation>Usar compensación de punto &amp;negro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Default color profile for imported images</source>
        <translation type="obsolete">Perfil de color por defecto para imágenes importadas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Default color profile for solid colors on the page</source>
        <translation type="obsolete">Perfil de color por defecto para colores sólidos en la página</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="132"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation>El perfil de color que hayas generado o que te haya dado el fabricante.
Debería ser específico para tu monitor y no uno genérico (como sRGB).</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="133"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation>El perfil de color del fabricante para tu modelo de impresora.
Debería ser específico para tu impresora y no uno genérico (como sRGB).</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="136"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation>Activar comprobación software (soft proofing) de cómo se imprimirán 
los colores del documento, basada en el perfil de impresora seleccionado.</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="138"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation>Una forma de mostrar en la pantalla los colores que no se imprimirán apropiadamente.
Esto requiere perfiles muy precisos y sólo sirve como un aviso.</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="139"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation>Un método de mejorar el contraste en las fotos. Se recomienda
que lo actives si tienes fotos en el documento</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="194"/>
        <source>Relative Colorimetric</source>
        <translation>Colormetraje Relativo</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="195"/>
        <source>Absolute Colorimetric</source>
        <translation>Colormetraje Absoluto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Default rendering intent for your monitor. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Modo de visualización por defecto para tu monitor. A menos que sepas
porqué cambiarlo, deberías elegir Colormetraje Relativo o Perceptivo.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Default rendering intent for your printer. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Modo de visualización por defecto para tu impresora. A menos que sepas
porqué cambiarlo, deberías elegir Colormetraje Relativo o Perceptivo.</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="40"/>
        <source>&amp;RGB Pictures:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="47"/>
        <source>&amp;CMYK Pictures:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="128"/>
        <source>Default color profile for imported CMYK images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="129"/>
        <source>Default color profile for imported RGB images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="54"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="61"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="89"/>
        <source>Pictures:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="96"/>
        <source>Sol&amp;id Colors:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="110"/>
        <source>Convert all colors to printer space</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="130"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="131"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="134"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="135"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="137"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CMYKChoose</name>
    <message>
        <location filename="../cmykfw.cpp" line="88"/>
        <source>Edit Color</source>
        <translation>Editar color</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="97"/>
        <source>&amp;Name:</source>
        <translation>&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="107"/>
        <source>Color &amp;Model</source>
        <translation>&amp;Modelo de color</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="1007"/>
        <source>CMYK</source>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="1009"/>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="876"/>
        <source>Web Safe RGB</source>
        <translation>RGB Seguro para la Red</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="137"/>
        <source>New</source>
        <translation>Nuevo</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="154"/>
        <source>Old</source>
        <translation>Viejo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="192"/>
        <source>HSV-Colormap</source>
        <translation>Mapa de color TSI (HSV)</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="817"/>
        <source>C:</source>
        <translation>C:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="816"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="818"/>
        <source>M:</source>
        <translation>M:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="819"/>
        <source>Y:</source>
        <translation>Y:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="347"/>
        <source>K:</source>
        <translation>K:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="436"/>
        <source>Dynamic Color Bars</source>
        <translation>Barras de Color Dinámicas</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="439"/>
        <source>Static Color Bars</source>
        <translation>Barras de Color Estáticas</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="861"/>
        <source>R:</source>
        <translation>R:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="862"/>
        <source>G:</source>
        <translation>G:</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="863"/>
        <source>B:</source>
        <translation>B:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>You cannot create a color named &quot;%1&quot;.
It&apos;s a reserved name for transparent color</source>
        <translation type="obsolete">No puedes crear un color llamado &quot;%1&quot;.
Es un nombre reservado para el color transparente.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Name of the Color is not unique</source>
        <translation type="obsolete">El nombre del color ya existe</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="121"/>
        <source>Is Spot Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="126"/>
        <source>Is Registration Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="1079"/>
        <source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="391"/>
        <source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="1088"/>
        <source>The name of the color already exists,
please choose another one.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="392"/>
        <source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="897"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CStyleP</name>
    <message>
        <location filename="../smcstylew.ui" line="13"/>
        <source>Form1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="49"/>
        <source>Based On:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="89"/>
        <source>Basic Formatting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="99"/>
        <source>Advanced Formatting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="109"/>
        <source>Colors</source>
        <translation type="unfinished">Colores</translation>
    </message>
</context>
<context>
    <name>CWDialog</name>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="318"/>
        <source>Merging colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="324"/>
        <source>Error: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="324"/>
        <source>Color %1 exists already!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="329"/>
        <source>Color %1 appended.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="333"/>
        <source>Now opening the color manager.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="336"/>
        <source>Color Merging</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.cpp" line="487"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="15"/>
        <source>Color Wheel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="47"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="54"/>
        <source>Result Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="311"/>
        <source>CMYK</source>
        <translation type="unfinished">CMYK</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="532"/>
        <source>RGB</source>
        <translation type="unfinished">RGB</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="718"/>
        <source>HSV</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="108"/>
        <source>Colors of your chosen color scheme.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="118"/>
        <source>Color Scheme Method</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="144"/>
        <source>Angle:</source>
        <translation type="unfinished">Ángulo:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="154"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="169"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="203"/>
        <source>Merge created colors into the document colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="206"/>
        <source>&amp;Merge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="209"/>
        <source>Alt+M</source>
        <translation type="unfinished">Alt+M</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="216"/>
        <source>Replace created colors in the document colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="219"/>
        <source>&amp;Replace</source>
        <translation type="unfinished">&amp;Reemplazar</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="222"/>
        <source>Alt+R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="229"/>
        <source>Leave colors untouched</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="232"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="235"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="244"/>
        <source>Preview:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="268"/>
        <source>Sample color scheme.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="287"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="294"/>
        <source>Vision Defect Type:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="331"/>
        <source>C:</source>
        <translation type="unfinished">C:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="431"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="361"/>
        <source>M:</source>
        <translation type="unfinished">M:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="391"/>
        <source>Y:</source>
        <translation type="unfinished">Y:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="421"/>
        <source>K:</source>
        <translation type="unfinished">K:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="827"/>
        <source>RGB:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="674"/>
        <source>HSV:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="560"/>
        <source>R:</source>
        <translation type="unfinished">R:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="587"/>
        <source>G:</source>
        <translation type="unfinished">G:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="614"/>
        <source>B:</source>
        <translation type="unfinished">B:</translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="863"/>
        <source>CMYK:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="746"/>
        <source>H:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="773"/>
        <source>S:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="800"/>
        <source>V:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/cwdialog.ui" line="907"/>
        <source>Document</source>
        <translation type="unfinished">Documento</translation>
    </message>
</context>
<context>
    <name>CWDialogBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C:</source>
        <translation type="obsolete">C:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>M:</source>
        <translation type="obsolete">M:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>K:</source>
        <translation type="obsolete">K:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>R:</source>
        <translation type="obsolete">R:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>G:</source>
        <translation type="obsolete">G:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>B:</source>
        <translation type="obsolete">B:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Document</source>
        <translation type="obsolete">Documento</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Angle:</source>
        <translation type="obsolete">Ángulo:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+M</source>
        <translation type="obsolete">Alt+M</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Replace</source>
        <translation type="obsolete">&amp;Reemplazar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
</context>
<context>
    <name>CharSelect</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Select Character:</source>
        <translation type="obsolete">Seleccionar Carácter:</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="56"/>
        <source>Font:</source>
        <translation type="unfinished">Fuente:</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="64"/>
        <source>Character Class:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="89"/>
        <source>&amp;Insert</source>
        <translation type="unfinished">&amp;Insertar</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="90"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="137"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="unfinished">Inserta los caracteres en el texto en la posición del cursor</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="138"/>
        <source>Delete the current selection(s).</source>
        <translation type="unfinished">Borra la selección actual</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Close this dialog and return to text editing.</source>
        <translation type="obsolete">Cierra este diálogo y vuelve a la edición de texto</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="330"/>
        <source>Full Character Set</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="335"/>
        <source>Basic Latin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="341"/>
        <source>Latin-1 Supplement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="347"/>
        <source>Latin Extended-A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="353"/>
        <source>Latin Extended-B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="359"/>
        <source>General Punctuation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="365"/>
        <source>Super- and Subscripts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="371"/>
        <source>Currency Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="377"/>
        <source>Letterlike Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="383"/>
        <source>Number Forms</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="389"/>
        <source>Arrows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="395"/>
        <source>Mathematical Operators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="401"/>
        <source>Box Drawing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="407"/>
        <source>Block Elements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="413"/>
        <source>Geometric Shapes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="419"/>
        <source>Miscellaneous Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="425"/>
        <source>Dingbats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="431"/>
        <source>Small Form Variants</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="437"/>
        <source>Ligatures</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="443"/>
        <source>Specials</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="449"/>
        <source>Greek</source>
        <translation type="unfinished">Griego</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="455"/>
        <source>Greek Extended</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="461"/>
        <source>Cyrillic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="467"/>
        <source>Cyrillic Supplement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="473"/>
        <source>Arabic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="479"/>
        <source>Arabic Extended A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="485"/>
        <source>Arabic Extended B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="491"/>
        <source>Hebrew</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="139"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="38"/>
        <source>Scribus Char Palette (*.ucp);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="47"/>
        <source>Enhanced Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="98"/>
        <source>Quick Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="105"/>
        <source>Hide Enhanced</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="648"/>
        <source>Choose a filename to open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="713"/>
        <source>Error</source>
        <translation type="unfinished">Error</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="675"/>
        <source>Error reading file %1 - file is corrupted propably.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="694"/>
        <source>Choose a filename to save under</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="714"/>
        <source>Cannot write file %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="722"/>
        <source>Clean the Palette?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="723"/>
        <source>You will clean all characters from this palette. Are you sure?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="37"/>
        <source>Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharStyleComboBox</name>
    <message>
        <location filename="../spalette.cpp" line="117"/>
        <source>No Style</source>
        <translation type="unfinished">Sin estilo</translation>
    </message>
</context>
<context>
    <name>CharTable</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete</source>
        <translation type="obsolete">Borrar</translation>
    </message>
</context>
<context>
    <name>CharTableView</name>
    <message>
        <location filename="../chartableview.cpp" line="23"/>
        <source>Delete</source>
        <translation type="unfinished">Borrar</translation>
    </message>
</context>
<context>
    <name>CheckDocument</name>
    <message>
        <location filename="../checkDocument.cpp" line="826"/>
        <source>Glyphs missing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="827"/>
        <source>Text overflow</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="828"/>
        <source>Object is not on a Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="829"/>
        <source>Missing Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="832"/>
        <source>Object has transparency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="833"/>
        <source>Object is a PDF Annotation or Field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="834"/>
        <source>Object is a placed PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="248"/>
        <source>Document</source>
        <translation type="unfinished">Documento</translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="252"/>
        <source>No Problems found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="628"/>
        <source>Page </source>
        <translation type="unfinished">Página </translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="796"/>
        <source>Free Objects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="802"/>
        <source>Problems found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="816"/>
        <source>Preflight Verifier</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="818"/>
        <source>Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="819"/>
        <source>Problems</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="822"/>
        <source>Current Profile:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="823"/>
        <source>&amp;Ignore Errors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="824"/>
        <source>Check again</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="830"/>
        <source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="831"/>
        <source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="835"/>
        <source>Image is GIF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="253"/>
        <source>OK</source>
        <translation type="unfinished">Aceptar</translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="274"/>
        <source>Transparency used</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="277"/>
        <source>Blendmode used</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="284"/>
        <source>Layer &quot;%1&quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../checkDocument.cpp" line="836"/>
        <source>Annotation uses a non TrueType font</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CheckerPrefsList</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Postscript</source>
        <translation type="obsolete">Postscript</translation>
    </message>
</context>
<context>
    <name>ChooseStyles</name>
    <message>
        <location filename="../editformats.cpp" line="95"/>
        <source>Choose Styles</source>
        <translation type="obsolete">Elegir Estilos</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="100"/>
        <source>Available Styles</source>
        <translation type="obsolete">Estilos Disponibles</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Cancel</source>
        <translation type="obsolete">Cancelar</translation>
    </message>
</context>
<context>
    <name>CollectForOutput</name>
    <message>
        <location filename="../collect4output.cpp" line="52"/>
        <source>Choose a Directory</source>
        <translation type="unfinished">Elige un directorio</translation>
    </message>
    <message>
        <location filename="../collect4output.cpp" line="68"/>
        <source>Collecting...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="../collect4output.cpp" line="73"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../collect4output.cpp" line="87"/>
        <source>Cannot collect the file: 
%1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorManager</name>
    <message>
        <location filename="../colorm.cpp" line="50"/>
        <source>Colors</source>
        <translation type="unfinished">Colores</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="76"/>
        <source>&amp;Import</source>
        <translation type="unfinished">&amp;Importar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="78"/>
        <source>&amp;New</source>
        <translation type="unfinished">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="80"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">&amp;Editar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="84"/>
        <source>D&amp;uplicate</source>
        <translation type="unfinished">&amp;Duplicar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="87"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="92"/>
        <source>&amp;Remove Unused</source>
        <translation type="unfinished">Borrar no &amp;usados</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="99"/>
        <source>Color Sets</source>
        <translation type="unfinished">Conjuntos de Colores</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="105"/>
        <source>Current Color Set:</source>
        <translation type="unfinished">Conjunto actual:</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="148"/>
        <source>&amp;Save Color Set</source>
        <translation type="unfinished">&amp;Guardar Conjunto de Colores</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="167"/>
        <source>Choose a color set to load</source>
        <translation type="unfinished">Elige el conjunto de colores a cargar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="168"/>
        <source>Save the current color set</source>
        <translation type="unfinished">Guarda el conjunto de colores actual</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="173"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation type="unfinished">Eliminar del conjunto de colores del documento los que no se usen</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="175"/>
        <source>Import colors to the current set from an existing document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="176"/>
        <source>Create a new color within the current set</source>
        <translation type="unfinished">Crear un nuevo color en el actual conjunto</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="177"/>
        <source>Edit the currently selected color</source>
        <translation type="unfinished">Editar el color seleccionado</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="178"/>
        <source>Make a copy of the currently selected color</source>
        <translation type="unfinished">Hacer una copia del color seleccionado</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="179"/>
        <source>Delete the currently selected color</source>
        <translation type="unfinished">Borrar el color seleccionado</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="180"/>
        <source>Make the current colorset the default color set</source>
        <translation type="unfinished">Establecer el conjunto actual como el conjunto de colores por defecto</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="198"/>
        <source>&amp;Name:</source>
        <translation type="unfinished">&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="198"/>
        <source>Choose a Name</source>
        <translation type="unfinished">Elige un nombre</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Open</source>
        <translation type="obsolete">Abrir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.sla.gz *.scd *.scd.gz);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.scd);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="560"/>
        <source>Copy of %1</source>
        <translation type="unfinished">Copia de %1</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="571"/>
        <source>New Color</source>
        <translation type="unfinished">Nuevo color</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="181"/>
        <source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="428"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.epsi *.ps *.ai);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="544"/>
        <source>Information</source>
        <translation type="unfinished">Información</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="428"/>
        <source>Import</source>
        <translation type="unfinished">Importar</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="544"/>
        <source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import. 
Not all files have DSC conformant comments where the color descriptions are located.
 This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorWheel</name>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="135"/>
        <source>Monochromatic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="136"/>
        <source>Analogous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="220"/>
        <source>Complementary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="138"/>
        <source>Split Complementary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
        <source>Triadic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
        <source>Tetradic (Double Complementary)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="40"/>
        <source>Base Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="202"/>
        <source>Monochromatic Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="205"/>
        <source>Monochromatic Dark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="212"/>
        <source>1st. Analogous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="213"/>
        <source>2nd. Analogous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="227"/>
        <source>1st. Split</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="228"/>
        <source>2nd. Split</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="229"/>
        <source>3rd. Split</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="230"/>
        <source>4th. Split</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="237"/>
        <source>1st. Triadic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="238"/>
        <source>2nd. Triadic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="245"/>
        <source>1st. Tetradic (base opposite)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="246"/>
        <source>2nd. Tetradic (angle)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheelwidget.cpp" line="247"/>
        <source>3rd. Tetradic (angle opposite)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorWheelDialog</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Color</source>
        <translation type="obsolete">Color</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Name</source>
        <translation type="obsolete">Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C</source>
        <translation type="obsolete">C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C&amp;olor</source>
        <translation type="obsolete">Co&amp;lor</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>New Color</source>
        <translation type="obsolete">Nuevo color</translation>
    </message>
</context>
<context>
    <name>ColorWheelPlugin</name>
    <message>
        <location filename="../plugins/colorwheel/colorwheel.cpp" line="47"/>
        <source>&amp;Color Wheel...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheel.cpp" line="63"/>
        <source>Color setting helper</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/colorwheel/colorwheel.cpp" line="64"/>
        <source>Color selector with color theory included.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CommonStrings</name>
    <message>
        <location filename="../commonstrings.cpp" line="186"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">A&amp;plicar</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="189"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="192"/>
        <source>None</source>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="196"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="199"/>
        <source>&amp;Save</source>
        <translation type="unfinished">&amp;Guardar</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="202"/>
        <source>Warning</source>
        <translation type="unfinished">Atención</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="193"/>
        <source>None</source>
        <comment>color name</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="210"/>
        <source>Custom</source>
        <comment>CommonStrings, custom page size</comment>
        <translation type="unfinished">Personalizado</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="216"/>
        <source>Single Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="217"/>
        <source>Double Sided</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="218"/>
        <source>3-Fold</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="219"/>
        <source>4-Fold</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Left Page</source>
        <translation type="obsolete">Página izquierda</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Right Page</source>
        <translation type="obsolete">Página derecha</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="247"/>
        <source>Monday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="248"/>
        <source>Tuesday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="249"/>
        <source>Wednesday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="250"/>
        <source>Thursday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="251"/>
        <source>Friday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="252"/>
        <source>Saturday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="253"/>
        <source>Sunday</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="254"/>
        <source>January</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="255"/>
        <source>February</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="256"/>
        <source>March</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="257"/>
        <source>April</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="258"/>
        <source>May</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="259"/>
        <source>June</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="260"/>
        <source>July</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="261"/>
        <source>August</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="262"/>
        <source>September</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="263"/>
        <source>October</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="264"/>
        <source>November</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="265"/>
        <source>December</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="204"/>
        <source>Yes</source>
        <translation type="unfinished">Sí</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="205"/>
        <source>No</source>
        <translation type="unfinished">No</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="206"/>
        <source>&amp;Yes</source>
        <translation type="unfinished">&amp;Sí</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="207"/>
        <source>&amp;No</source>
        <translation type="unfinished">&amp;No</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="226"/>
        <source>Left Page</source>
        <comment>Left page location</comment>
        <translation type="unfinished">Página izquierda</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="227"/>
        <source>Middle</source>
        <comment>Middle page location</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="228"/>
        <source>Middle Left</source>
        <comment>Middle Left page location</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="229"/>
        <source>Middle Right</source>
        <comment>Middle Right page location</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="230"/>
        <source>Right Page</source>
        <comment>Right page location</comment>
        <translation type="unfinished">Página derecha</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="233"/>
        <source>Normal</source>
        <comment>Default single master page</comment>
        <translation type="unfinished">Normal</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="235"/>
        <source>Normal Left</source>
        <comment>Default left master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="237"/>
        <source>Normal Middle</source>
        <comment>Default middle master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="239"/>
        <source>Normal Right</source>
        <comment>Default right master page</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="273"/>
        <source>Normal Vision</source>
        <comment>Color Blindness - Normal Vision</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="274"/>
        <source>Protanopia (Red)</source>
        <comment>Color Blindness - Red Color Blind</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="275"/>
        <source>Deuteranopia (Green)</source>
        <comment>Color Blindness - Greed Color Blind</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="276"/>
        <source>Tritanopia (Blue)</source>
        <comment>Color Blindness - Blue Color Blind</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="277"/>
        <source>Full Color Blindness</source>
        <comment>Color Blindness - Full Color Blindness</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="279"/>
        <source>Custom: </source>
        <comment>Custom Tab Fill Option</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="241"/>
        <source>Solid Line</source>
        <translation type="unfinished">Línea sólida</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="242"/>
        <source>Dashed Line</source>
        <translation type="unfinished">Línea a trazos</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="243"/>
        <source>Dotted Line</source>
        <translation type="unfinished">Línea a puntos</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="244"/>
        <source>Dash Dot Line</source>
        <translation type="unfinished">Línea raya punto</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="245"/>
        <source>Dash Dot Dot Line</source>
        <translation type="unfinished">Línea raya punto punto</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="281"/>
        <source>None</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="282"/>
        <source>Left Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="283"/>
        <source>Right Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="284"/>
        <source>Left Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="285"/>
        <source>Right Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="286"/>
        <source>Default</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="289"/>
        <source>Min. Word Tracking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="290"/>
        <source>Max. Word Tracking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="293"/>
        <source>Min. Glyph Extension</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="294"/>
        <source>Max. Glyph Extension</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="267"/>
        <source>RGB</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">RGB</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="268"/>
        <source>CMYK</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">CMYK</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="269"/>
        <source>Grayscale</source>
        <comment>Colorspace</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="270"/>
        <source>Duotone</source>
        <comment>Colorspace</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="271"/>
        <source>Unknown</source>
        <comment>Colorspace (Unknown)</comment>
        <translation type="unfinished">Desconocido</translation>
    </message>
    <message>
        <location filename="../commonstrings.cpp" line="297"/>
        <source>PostScript</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Cpalette</name>
    <message>
        <location filename="../cpalette.cpp" line="833"/>
        <source>Shade:</source>
        <translation>Saturación:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="817"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="834"/>
        <source>Opacity:</source>
        <translation>Opacidad:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="856"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="844"/>
        <source>Horizontal Gradient</source>
        <translation>Degradado horizontal</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="845"/>
        <source>Vertical Gradient</source>
        <translation>Degradado vertical</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="846"/>
        <source>Diagonal Gradient</source>
        <translation>Degradado diagonal</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="847"/>
        <source>Cross Diagonal Gradient</source>
        <translation>Degradado diagonal cruzado</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="848"/>
        <source>Radial Gradient</source>
        <translation>Degradado radial</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="849"/>
        <source>Free linear Gradient</source>
        <translation>Degradado lineal libre</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="850"/>
        <source>Free radial Gradient</source>
        <translation>Degradado radial libre</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="835"/>
        <source>X1:</source>
        <translation>X1:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="836"/>
        <source>Y1:</source>
        <translation>Y1:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="812"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="837"/>
        <source>X2:</source>
        <translation>X2:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="838"/>
        <source>Y2:</source>
        <translation>Y2:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="873"/>
        <source>Edit Line Color Properties</source>
        <translation>Editar color de línea</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="874"/>
        <source>Edit Fill Color Properties</source>
        <translation>Editar color de relleno</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="875"/>
        <source>Saturation of color</source>
        <translation>Saturación del color</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="876"/>
        <source>Normal or gradient fill method</source>
        <translation>Método de relleno normal o gradiente</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="877"/>
        <source>Set the transparency for the color selected</source>
        <translation>Establece la transparencia del color seleccionado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Color of selected object</source>
        <translation type="obsolete">Color del objeto seleccionado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="839"/>
        <source>Move Vector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="878"/>
        <source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="853"/>
        <source>Transparency Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="854"/>
        <source>Blend Mode:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="857"/>
        <source>Darken</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="858"/>
        <source>Lighten</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="859"/>
        <source>Multiply</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="860"/>
        <source>Screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="861"/>
        <source>Overlay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="862"/>
        <source>Hard Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="863"/>
        <source>Soft Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="864"/>
        <source>Difference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="866"/>
        <source>Color Dodge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="867"/>
        <source>Color Burn</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="868"/>
        <source>Hue</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="869"/>
        <source>Saturation</source>
        <translation type="unfinished">Saturación</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="870"/>
        <source>Color</source>
        <translation type="unfinished">Color</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="871"/>
        <source>Luminosity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="820"/>
        <source>Offsets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="821"/>
        <source>X:</source>
        <translation type="unfinished">X:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="823"/>
        <source>Y:</source>
        <translation type="unfinished">Y:</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="825"/>
        <source>Scaling</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="830"/>
        <source>Rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="831"/>
        <source>Angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="851"/>
        <source>Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="865"/>
        <source>Exclusion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="826"/>
        <source>X-Scale:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="828"/>
        <source>Y-Scale:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CreateRange</name>
    <message>
        <location filename="../createrange.ui" line="13"/>
        <source>Create Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="33"/>
        <source>Number of Pages in Document:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="43"/>
        <source>Doc Page Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="91"/>
        <source>Basic Range Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="103"/>
        <source>Range of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="115"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="118"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="141"/>
        <source>Move &amp;Down</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="144"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="151"/>
        <source>Move &amp;Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="154"/>
        <source>Alt+U</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="173"/>
        <source>Add a Range of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="185"/>
        <source>Consecutive Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="195"/>
        <source>Even Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="202"/>
        <source>From:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="234"/>
        <source>To:</source>
        <translation type="unfinished">Hasta:</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="268"/>
        <source>&amp;Add To Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="271"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="296"/>
        <source>Odd Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="306"/>
        <source>Comma Separated List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="317"/>
        <source>Advanced Reordering</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="361"/>
        <source>Page Order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="371"/>
        <source>Sample Page Order:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="400"/>
        <source>Page Group Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="438"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="441"/>
        <source>Alt+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="448"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../createrange.ui" line="451"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
</context>
<context>
    <name>CreateRangeBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>To:</source>
        <translation type="obsolete">Hasta:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+B</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>CsvDialog</name>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="27"/>
        <source>CSV Importer Options</source>
        <translation>Opciones de importación de CSV</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="37"/>
        <source>Field delimiter:</source>
        <translation>Delimitador de campo:</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="89"/>
        <source>(TAB)</source>
        <translation>(TAB)</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="53"/>
        <source>Value delimiter:</source>
        <translation>Delimitador de valor:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="68"/>
        <source>First row is a header</source>
        <translation>La primera fila es una cabecera</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="76"/>
        <source>OK</source>
        <translation>Aceptar</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="79"/>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
    <message>
        <location filename="../plugins/gettext/csvim/csvdia.cpp" line="59"/>
        <source>None</source>
        <comment>delimiter</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
</context>
<context>
    <name>CupsOptions</name>
    <message>
        <location filename="../cupsoptions.cpp" line="52"/>
        <source>Printer Options</source>
        <translation>Opciones de impresión</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="143"/>
        <source>Page Set</source>
        <translation>Selección de páginas</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="147"/>
        <source>All Pages</source>
        <translation>Todas</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="141"/>
        <source>Even Pages only</source>
        <translation>Sólo pares</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="142"/>
        <source>Odd Pages only</source>
        <translation>Sólo impares</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="160"/>
        <source>Mirror</source>
        <translation>Voltear</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>No</source>
        <translation type="obsolete">No</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Yes</source>
        <translation type="obsolete">Sí</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="177"/>
        <source>Orientation</source>
        <translation>Orientación:</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="181"/>
        <source>Portrait</source>
        <translation>Vertical</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="175"/>
        <source>Landscape</source>
        <translation>Apaisado</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="197"/>
        <source>N-Up Printing</source>
        <translation>Páginas por hoja</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="201"/>
        <source>Page per Sheet</source>
        <translation>Página por hoja</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="196"/>
        <source>Pages per Sheet</source>
        <translation>Páginas por hoja</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="63"/>
        <source>Option</source>
        <translation>Opción</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="64"/>
        <source>Value</source>
        <translation>Valor</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>This panel displays various CUPS options when printing. 
The exact parameters available will depend on your printer driver.
You can confirm CUPS support by selecting Help &gt; About.
Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support.
Missing library support is indicated by a *</source>
        <translation type="obsolete">Este panel muestra varias opciones de CUPS cuando se imprime.
Los parámetros exactos disponibles dependerán del driver de tu impresora.
Puedes confirmar el qué soporta CUPS seleccionando Ayuda &gt; Acerca de Scribus.
Busca los listados: C-C-T Esto significa soporte de C=CUPS C=littlecms T=TIFF
Las bibliotecas que falten se indican con un *</translation>
    </message>
    <message>
        <location filename="../cupsoptions.cpp" line="224"/>
        <source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CurveWidget</name>
    <message>
        <location filename="../curvewidget.cpp" line="433"/>
        <source>Open</source>
        <translation type="unfinished">Abrir</translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="468"/>
        <source>Curve Files (*.scu);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="468"/>
        <source>Save as</source>
        <translation type="unfinished">Guardar como</translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="502"/>
        <source>Cannot write the file: 
%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="522"/>
        <source>Inverts the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="523"/>
        <source>Resets the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="524"/>
        <source>Switches between linear and cubic interpolation of the curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="525"/>
        <source>Loads a curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../curvewidget.cpp" line="526"/>
        <source>Saves this curve</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CustomFDialog</name>
    <message>
        <location filename="../customfdialog.cpp" line="333"/>
        <source>&amp;Compress File</source>
        <translation>&amp;Comprimir el archivo</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="312"/>
        <source>&amp;Include Fonts</source>
        <translation>&amp;Incluir fuentes</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="353"/>
        <source>Encoding:</source>
        <translation>Codificación:</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="366"/>
        <source>Moves to your Document Directory.
This can be set in the Preferences.</source>
        <translation type="obsolete">Ir al Directorio Documentos.
Se puede definir en las Preferencias.</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="314"/>
        <source>&amp;Include ICC Profiles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="284"/>
        <source>Show Preview</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CwSetColor</name>
    <message>
        <location filename="" line="136965632"/>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>R:</source>
        <translation type="obsolete">R:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>G:</source>
        <translation type="obsolete">G:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>B:</source>
        <translation type="obsolete">B:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C:</source>
        <translation type="obsolete">C:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>M:</source>
        <translation type="obsolete">M:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>K:</source>
        <translation type="obsolete">K:</translation>
    </message>
</context>
<context>
    <name>DeferredTask</name>
    <message>
        <location filename="../deferredtask.cpp" line="82"/>
        <source>Cancelled by user</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DelColor</name>
    <message>
        <location filename="../dcolor.cpp" line="30"/>
        <source>Delete Color</source>
        <translation>Borrar color</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete color:</source>
        <translation type="obsolete">Color a borrar:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>?</source>
        <translation type="obsolete">?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Replace it with:</source>
        <translation type="obsolete">Reemplazarlo con:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../dcolor.cpp" line="38"/>
        <source>Delete Color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../dcolor.cpp" line="47"/>
        <source>Replace With:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DelPages</name>
    <message>
        <location filename="../delpages.cpp" line="18"/>
        <source>Delete Pages</source>
        <translation>Borrar páginas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete from:</source>
        <translation type="obsolete">Borrar desde:</translation>
    </message>
    <message>
        <location filename="../delpages.cpp" line="33"/>
        <source>to:</source>
        <translation>hasta:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../delpages.cpp" line="27"/>
        <source>Delete From:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DelStyle</name>
    <message>
        <location filename="../editformats.cpp" line="49"/>
        <source>No Style</source>
        <translation type="obsolete">Sin estilo</translation>
    </message>
</context>
<context>
    <name>DmF</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Missing Font</source>
        <translation type="obsolete">Fuente ausente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The Font %1 is not installed.</source>
        <translation type="obsolete">La fuente %1 no está instalada.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Use</source>
        <translation type="obsolete">Usar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>instead</source>
        <translation type="obsolete">en su lugar.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
</context>
<context>
    <name>DocIm</name>
    <message>
        <location filename="../plugins/gettext/docim/docim.cpp" line="171"/>
        <source>Importing failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/gettext/docim/docim.cpp" line="172"/>
        <source>Importing Word document failed 
%1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocInfos</name>
    <message>
        <location filename="../docinfo.cpp" line="31"/>
        <source>Document Information</source>
        <translation>Información del documento</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="40"/>
        <source>&amp;Title:</source>
        <translation>&amp;Título:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="46"/>
        <source>&amp;Author:</source>
        <translation>A&amp;utor:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="52"/>
        <source>&amp;Keywords:</source>
        <translation>&amp;Palabras clave</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="59"/>
        <source>Descri&amp;ption:</source>
        <translation>De&amp;scripción:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="71"/>
        <source>P&amp;ublisher:</source>
        <translation>&amp;Editor:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="77"/>
        <source>&amp;Contributors:</source>
        <translation>Cola&amp;boradores:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="84"/>
        <source>Dat&amp;e:</source>
        <translation>&amp;Fecha:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="90"/>
        <source>T&amp;ype:</source>
        <translation>&amp;Tipo:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="96"/>
        <source>F&amp;ormat:</source>
        <translation>&amp;Formato:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="102"/>
        <source>Identi&amp;fier:</source>
        <translation>&amp;Identificador:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="108"/>
        <source>&amp;Source:</source>
        <translation>&amp;Fuente:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="114"/>
        <source>&amp;Language:</source>
        <translation>&amp;Idioma:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="120"/>
        <source>&amp;Relation:</source>
        <translation>&amp;Relación:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="126"/>
        <source>Co&amp;verage:</source>
        <translation>&amp;Portada:</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="132"/>
        <source>Ri&amp;ghts:</source>
        <translation>De&amp;rechos:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Document</source>
        <translation type="obsolete">&amp;Documento</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="139"/>
        <source>Further &amp;Information</source>
        <translation>&amp;Información adicional</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The person or organisation primarily responsible for making the content of the document.
This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation type="obsolete">La persona u organización responsable principal de hacer el contenido del documento.
Este campo se puede empotrar en el documento de Scribus como referencia,
además de en los metadados de un PDF.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A name given to the document.
This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation type="obsolete">Un nombre dado al documento.
Este campo se puede empotrar en el documento de Scribus como referencia,
además de en los metadados de un PDF.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>An account of the content of the document.
This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation type="obsolete">Un informe del contenido del documento.
Este campo es para una breve descripción o resumen del documento.
Se empotra en el PDF al exportar.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The topic of the content of the document.
This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation type="obsolete">El tema del contenido del documento.
Este campo es para palabras clave del documento que deseas que se
empotren en un PDF, para ayudar a buscar e indexar archivos PDF.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="149"/>
        <source>A person or organisation responsible for making the document available</source>
        <translation>Una persona u organización responsable de hacer disponible el documento</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="150"/>
        <source>A person or organisation responsible for making contributions to the content of the document</source>
        <translation>Una persona u organización responsable de hacer contribuciones al contenido del documento.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="151"/>
        <source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
        <translation>Una fecha asociada con un evento en el ciclo de vida del documento, en formato AAAA-MM-DD, de acuerdo a ISO 8601.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="152"/>
        <source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
        <translation>La naturaleza o género del contenido del documento, p.ej. categorías, funciones, géneros, etc.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting.
RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation type="obsolete">El formato físico o digital del documento. El tipo de medio y las dimensiones serían interesantes.
También son útiles los tipos MIME según RFC2045 y RFC2046.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="154"/>
        <source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
        <translation>Una referencia ambigua al documento dentro de un contexto dado, como un ISBN o URI.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="155"/>
        <source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
        <translation>Una referencia a un documento del que deriva el documento actual, p.ej. un ISBN o URI.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code
optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation type="obsolete">El idioma en que está escrito el contenido del documento, normalmente un código de idioma ISO-639
opcionalmente seguido con un guión y un código de país ISO-3166, p.ej. en-GB, fr-CH.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="157"/>
        <source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
        <translation>Una referencia a un documento relacionado, posiblemente usando un identificador formal como un ISBN o URI.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="158"/>
        <source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
        <translation>La extensión o alcance del contenido del documento, posiblemente incluyendo localización, tiempo y rangos de jurisdicción.</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="159"/>
        <source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
        <translation>Información sobre los derechos mantenidos sobre el documento, p.ej. derechos de autor, patentes o marcas registradas.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="138"/>
        <source>Documen&amp;t</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="145"/>
        <source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="146"/>
        <source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="147"/>
        <source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="148"/>
        <source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="153"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docinfo.cpp" line="156"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocSections</name>
    <message>
        <location filename="../docsections.cpp" line="61"/>
        <source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="62"/>
        <source>Delete the currently selected section.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="76"/>
        <source>1, 2, 3, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="76"/>
        <source>i, ii, iii, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="76"/>
        <source>I, II, III, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="76"/>
        <source>a, b, c, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="76"/>
        <source>A, B, C, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="68"/>
        <source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="190"/>
        <source>Page Number Out Of Bounds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.cpp" line="190"/>
        <source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="13"/>
        <source>Document Sections</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="83"/>
        <source>&amp;Add</source>
        <translation type="unfinished">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="86"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="93"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="96"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="32"/>
        <source>Name</source>
        <translation type="unfinished">Nombre:</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="37"/>
        <source>Shown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="42"/>
        <source>From</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="47"/>
        <source>To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="52"/>
        <source>Style</source>
        <translation type="unfinished">Estilo</translation>
    </message>
    <message>
        <location filename="../docsections.ui" line="57"/>
        <source>Start</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocSectionsBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Name</source>
        <translation type="obsolete">Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Style</source>
        <translation type="obsolete">Estilo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Add</source>
        <translation type="obsolete">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+B</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributes</name>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="17"/>
        <source>Relates To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="17"/>
        <source>Is Parent Of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="17"/>
        <source>Is Child Of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="19"/>
        <source>Text Frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="19"/>
        <source>Image Frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="21"/>
        <source>Boolean</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="21"/>
        <source>Integer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="21"/>
        <source>String</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="26"/>
        <source>Name</source>
        <translation type="unfinished">Nombre:</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="31"/>
        <source>Type</source>
        <translation type="unfinished">Tipo</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="36"/>
        <source>Value</source>
        <translation type="unfinished">Valor</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="82"/>
        <source>&amp;Add</source>
        <translation type="unfinished">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="85"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="92"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Copiar</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="95"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="102"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="105"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="112"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="115"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="17"/>
        <source>None</source>
        <comment>relationship</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="19"/>
        <source>None</source>
        <comment>auto add</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="21"/>
        <source>None</source>
        <comment>types</comment>
        <translation type="unfinished">Ninguno</translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.cpp" line="21"/>
        <source>Real Number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="19"/>
        <source>Document Item Attributes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="41"/>
        <source>Parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="46"/>
        <source>Relationship</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="51"/>
        <source>Relationship To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../docitemattrprefs.ui" line="56"/>
        <source>Auto Add To</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributesBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Name</source>
        <translation type="obsolete">Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Type</source>
        <translation type="obsolete">Tipo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Value</source>
        <translation type="obsolete">Valor</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Add</source>
        <translation type="obsolete">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;Copiar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+B</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C&amp;lear</source>
        <translation type="obsolete">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>Druck</name>
    <message>
        <location filename="../druck.cpp" line="66"/>
        <source>Setup Printer</source>
        <translation>Configuración de la impresora</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="73"/>
        <source>Print Destination</source>
        <translation>Destino de la impresión</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="796"/>
        <source>File</source>
        <translation>Archivo</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="114"/>
        <source>&amp;Options...</source>
        <translation>&amp;Opciones</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="126"/>
        <source>&amp;File:</source>
        <translation>&amp;Archivo</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="131"/>
        <source>C&amp;hange...</source>
        <translation>Cam&amp;biar...</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="138"/>
        <source>A&amp;lternative Printer Command</source>
        <translation>Comando de impresión a&amp;lternativo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Use an alternative print manager, such as kprinter or gtklp,
to utilize additional printing options</source>
        <translation type="obsolete">Usar un administrador de impresión alternativo, como kprinter
o gtklp, para utilizar opciones de impresión adicionales.</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="147"/>
        <source>Co&amp;mmand:</source>
        <translation>Co&amp;mando:</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="154"/>
        <source>Range</source>
        <translation>Rango</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="159"/>
        <source>Print &amp;All</source>
        <translation>Imprimir &amp;todo</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="633"/>
        <source>Print Current Pa&amp;ge</source>
        <translation>Imprimir &amp;página actual</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="163"/>
        <source>Print &amp;Range</source>
        <translation>Imprimir el ran&amp;go</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="376"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation>Inserta una lista de elementos separados por comas,
donde un elemento puede ser * para todas las páginas,
1-5 para un intervalo de páginas o un único número.</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="183"/>
        <source>N&amp;umber of Copies:</source>
        <translation>N&amp;úmero de copias:</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="222"/>
        <source>Options</source>
        <translation>Opciones</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Print &amp;Normal</source>
        <translation type="obsolete">Impresión &amp;normal</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Print &amp;Separations</source>
        <translation type="obsolete">Imprimir &amp;separaciones</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="821"/>
        <source>All</source>
        <translation>Todos</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="820"/>
        <source>Cyan</source>
        <translation>Cian</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="819"/>
        <source>Magenta</source>
        <translation>Magenta</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="818"/>
        <source>Yellow</source>
        <translation>Amarillo</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="817"/>
        <source>Black</source>
        <translation>Negro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Pr&amp;int In Color If Available</source>
        <translation type="obsolete">Imprimir en colo&amp;r si está disponible</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Print In Gra&amp;yscale</source>
        <translation type="obsolete">Imprimir en &amp;escala de grises</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Ad&amp;vanced Options...</source>
        <translation type="obsolete">Opciones A&amp;vanzadas...</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="349"/>
        <source>&amp;Print</source>
        <translation>&amp;Imprimir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="619"/>
        <source>Save as</source>
        <translation>Guardar como</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Postscript-Files (*.ps);;All Files (*)</source>
        <translation type="obsolete">Archivos Postscript (*.ps);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="581"/>
        <source>Print Normal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="195"/>
        <source>Print Separations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="199"/>
        <source>Print in Color if Available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="200"/>
        <source>Print in Grayscale</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="217"/>
        <source>PostScript Level 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="218"/>
        <source>PostScript Level 2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="219"/>
        <source>PostScript Level 3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="228"/>
        <source>Page</source>
        <translation type="unfinished">Página</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="234"/>
        <source>Mirror Page(s) Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="237"/>
        <source>Mirror Page(s) Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="240"/>
        <source>Set Media Size</source>
        <translation type="unfinished">Establecer Tamaño del Medio</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="246"/>
        <source>Color</source>
        <translation type="unfinished">Color</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="252"/>
        <source>Apply Under Color Removal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="255"/>
        <source>Convert Spot Colors to Process Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="263"/>
        <source>Apply ICC Profiles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="267"/>
        <source>Advanced Options</source>
        <translation type="unfinished">Opciones Avanzadas</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="344"/>
        <source>Preview...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="378"/>
        <source>Sets the PostScript Level.
 Setting to Level 1 or 2 can create huge files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A way of switching off some of the gray shades which are composed
of cyan, yellow and magenta and using black instead.
UCR most affects parts of images which are neutral and/or dark tones
which are close to the gray. Use of this may improve printing some images
and some experimentation and testing is need on a case by case basis.
UCR reduces the possibility of over saturation with CMY inks.</source>
        <translation type="obsolete">Una forma de desactivar algunas de las saturaciones grises que están compuestas
de cian, amarillo y magenta y en lugar de eso usar negro.
UCR afecta en su mayoría a partes de images que son de tonos neutrales u
oscuros cercanos al gris. Esto puede mejorar la impresión de algunas imágenes
y se necesita hacer pruebas en cada caso.
UCR reduce la posibilidad de sobresaturación con tintas CMY (cian, magenta, amarillo).</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="619"/>
        <source>PostScript Files (*.ps);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="377"/>
        <source>Use an alternative print manager, such as kprinter or gtklp, to utilize additional printing options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="379"/>
        <source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis.UCR reduces the possibility of over saturation with CMY inks.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="380"/>
        <source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="383"/>
        <source>Allows you to embed ICC profiles in the print stream when color management is enabled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="384"/>
        <source>This enables you to explicitely set the media size of the PostScript file. Not recommended unless requested by your printer.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="242"/>
        <source>Clip to Page Margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Do not show objects outside the margins on the printed page or exported file</source>
        <translation type="obsolete">No mostrar objetos fuera de los margenes en la página imprimida o el archivo exportado</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="569"/>
        <source>Failed to retrieve printer settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="373"/>
        <source>Do not show objects outside the margins on the printed page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="258"/>
        <source>Force Overprint Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="381"/>
        <source>Enables global Overprint Mode for this document, overrides object settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="274"/>
        <source>Printer Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="279"/>
        <source>Crop Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="281"/>
        <source>Bleed Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="283"/>
        <source>Registration Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="285"/>
        <source>Color Bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="288"/>
        <source>Offset:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="293"/>
        <source>Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="300"/>
        <source>Bleed Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="306"/>
        <source>Top:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="311"/>
        <source>Bottom:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="316"/>
        <source>Left:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="321"/>
        <source>Right:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="325"/>
        <source>Use Document Bleeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="329"/>
        <source>Bleeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="332"/>
        <source>Inside:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="333"/>
        <source>Outside:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="390"/>
        <source>Distance for bleed from the top of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo superior de la página real</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="391"/>
        <source>Distance for bleed from the bottom of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo inferior de la página real</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="392"/>
        <source>Distance for bleed from the left of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo izquierdo de la página real</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="393"/>
        <source>Distance for bleed from the right of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo derecho de la página real</translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="385"/>
        <source>This creates crop marks in the PDF indicating where the paper should be cut or trimmed after printing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="386"/>
        <source>This creates bleed marks which are indicated by  _ . _ and show the bleed limit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="387"/>
        <source>Add registration marks which are added to each separation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="388"/>
        <source>Add color calibration bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="389"/>
        <source>Indicate the distance offset for the registration marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../druck.cpp" line="394"/>
        <source>Use the existing bleed settings from the document preferences</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EPSPlug</name>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="499"/>
        <source>Importing File:
%1
failed!</source>
        <translation>Error importando el archivo:
%1</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="500"/>
        <source>Fatal Error</source>
        <translation>Error fatal</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="855"/>
        <source>Error</source>
        <translation type="unfinished">Error</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="73"/>
        <source>Analyzing PostScript:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="505"/>
        <source>Generating Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="854"/>
        <source>Converting of %1 images failed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="725"/>
        <source>Group%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importps.cpp" line="70"/>
        <source>Importing: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EditMacroDialog</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Editing Macro: &lt;b&gt;</source>
        <translation type="obsolete">Editando la macro: &lt;b&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Macro Manager</source>
        <translation type="obsolete">Scribus - Administrador de Macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The file &apos;%1&apos; already exists.
Are you sure you want to overwrite it?
</source>
        <translation type="obsolete">El archivo &apos;%1&apos; ya existe. 
¿Está seguro de que desa sobreescribirlo?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>You have already edited this macro.
Are you sure you want to discard all your changes?
</source>
        <translation type="obsolete">Esta macro ha cambiado.
¿Está seguro de que desea descartar todos los cambios?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A full traceback follows:

%1
</source>
        <translation type="obsolete">A continuación se muestra una traza completa: 

%1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Compilation of the macro failed, so it can not 
be saved in its current form. The error was:
%1
</source>
        <translation type="obsolete">La compilación de la macro falló, por lo que no 
se pudo salvar en su forma actual. El error fue: 
%1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - New Macro</source>
        <translation type="obsolete">Scribus - Nueva Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;This is the Edit Macro / New Macro dialog box. Here you can change the source code to macros. Edit the source code to the macro in the text editing area below the &quot;Source Code&quot; label and click OK to save your changes to the macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Esto es el cuadro de diálogo de Editar Macro / Nueva Macro. Aquí puedes cambiar el código fuente de las macros. Edita el código fuente de la macro en el área de edición de texto debajo de la etiqueta &quot;Código Fuente&quot; y pulsa OK para salvar los cambios realizados a la macro.&lt;/qt&gt;
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Source Code:</source>
        <translation type="obsolete">Código Fuente:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Editing Macro:</source>
        <translation type="obsolete">Editar Macro:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The name of the macro being edited.</source>
        <translation type="obsolete">El nombre de la macro que se está editando.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;/qt&gt;This item displays the name of the macro you are currently editing.&lt;qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Este objeto muestra el nombre de la macro que estás editando.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Discard all changes and exit.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Descartar todos los cambios y salir.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Exit the editing dialog, discarding all changes you have made. If you want to exit without saving the macro but don&apos;t want to lose your changes, save your changes with &quot;Save Source As...&quot;.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Salir del diálogo de edición, descartando todos los cambios realizados. Si desea salir sin guardar los cambios pero no quiere perderlos, guarde los cambios con &quot;Guardar Código Como...&quot;.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Ok</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Save changes and exit.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Guardar los cambios y salir.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Save changes to the macro and exit. If there is a problem with the macro, a message will be displayed and the editing dialog will not close.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Guardar los cambios de la macro y salir. Si hay algún problema con la macro, se mostrará un mensaje y el diálogo de edición no se cerrará.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;This text area contains the source code of the macro. If you&apos;re creating a new macro there won&apos;t be anything in it, and if you&apos;re editing an existing macro the source code the macro was defined with will be shown here.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Este área de texto contiene el código fuente de la macro. Si estás creando una macro nueva no habrá nada, y si estás editando una macro ya existente se mostrará el código fuente de la macro.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Load Source ...</source>
        <translation type="obsolete">&amp;Cargar Código ...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Replace the current source code with code from a file.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Reemplazar el código fuente actual con el código de un archivo.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Load new source code into the editing area from &quot;file&quot;. Any source code in the editing area is replaced. The loaded source must be a Scribus macro function. If you load any other script, you&apos;ll need to edit it so that it&apos;ll work as a scripter macro before saving it.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Cargar el código fuente de &quot;file&quot; en el área de edición. Se reemplazará lo que haya en el área de edición. El código cargado será una macro de Scribus. Si cargas cualquier otro script, deberás editarlo para que funcione como una macro del scripter antes de guardarlo.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Save Source As...</source>
        <translation type="obsolete">&amp;Guardar Código Como...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+G</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Save the source code being edited to a file.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Guardar el código fuente editado a un archivo.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save the source code - the text - of the macro to a file. You can edit the saved source and load it again with &quot;Load Source...&quot;.</source>
        <translation type="obsolete">Guarda el código fuente - el texto - de la macro a un archivo. Puedes editar el código guardado y cargarlo de nuevo &quot;Cargar Código...&quot;.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Python source files (.py)</source>
        <translation type="obsolete">Código fuente de Python (*.py)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save File Dialog</source>
        <translation type="obsolete">Diálogo Guardar Archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save macro source</source>
        <translation type="obsolete">Guardar el código de la macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Open File Dialog</source>
        <translation type="obsolete">Diálogo Abrir Archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Select the source file to load</source>
        <translation type="obsolete">Selecciona el archivo de código a cargar</translation>
    </message>
</context>
<context>
    <name>EditStyle</name>
    <message>
        <location filename="../edit1format.cpp" line="47"/>
        <source>Edit Style</source>
        <translation type="obsolete">Editar Estilo</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="67"/>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="80"/>
        <source>Character</source>
        <translation type="obsolete">Carácter</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Font:</source>
        <translation type="obsolete">&amp;Fuente:</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="272"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Si&amp;ze:</source>
        <translation type="obsolete">&amp;Tamaño:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Effect:</source>
        <translation type="obsolete">Efectos:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Alignment:</source>
        <translation type="obsolete">Al&amp;ineación:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Drop Caps</source>
        <translation type="obsolete">Letra ca&amp;pital</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="268"/>
        <source>&amp;Lines:</source>
        <translation type="obsolete">&amp;Lineas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>F&amp;ill Color:</source>
        <translation type="obsolete">Color de &amp;relleno:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>St&amp;roke Color:</source>
        <translation type="obsolete">Color de tra&amp;zo:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Vertical Spaces</source>
        <translation type="obsolete">Espaciado vertical</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Adjust to Baseline &amp;Grid</source>
        <translation type="obsolete">A&amp;justar a las líneas de base</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Line &amp;Spacing:</source>
        <translation type="obsolete">Int&amp;erlineado:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Abo&amp;ve:</source>
        <translation type="obsolete">Arri&amp;ba:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Below:</source>
        <translation type="obsolete">&amp;Debajo:</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="300"/>
        <source>Tabulators and Indentation</source>
        <translation type="obsolete">Tabuladores y sangría</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="360"/>
        <source>Name of your paragraph style</source>
        <translation type="obsolete">Nombre del estilo de párrafo</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="361"/>
        <source>Font of selected text or object</source>
        <translation type="obsolete">Fuente del texto u objeto seleccionado</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="362"/>
        <source>Font Size</source>
        <translation type="obsolete">Tamaño de la fuente</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="363"/>
        <source>Color of text fill</source>
        <translation type="obsolete">Color de relleno del texto</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="364"/>
        <source>Color of text stroke</source>
        <translation type="obsolete">Color del trazo del texto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Provides an oversized first letter for a paragraph. Used for stylistic effect</source>
        <translation type="obsolete">Proporciona una primera letra de párrafo de mayor tamaño. Se usa para efecto estilístico.</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="366"/>
        <source>Determines the overall height, in line numbers, of the Drop Caps</source>
        <translation type="obsolete">Determina la altura general, en números de línea, de las letras capitales.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Align text to baseline grid</source>
        <translation type="obsolete">Alinear texto a las líneas de base</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="369"/>
        <source>Spacing above the paragraph</source>
        <translation type="obsolete">Espaciado por encima del párrafo</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="370"/>
        <source>Spacing below the paragraph</source>
        <translation type="obsolete">Espacio por debajo del párrafo</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="373"/>
        <source>Line Spacing</source>
        <translation type="obsolete">Espacio entre líneas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Name of the Style is not unique</source>
        <translation type="obsolete">El nombre del estilo ya existe</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="239"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="200"/>
        <source>Distances</source>
        <translation type="obsolete">Distancias</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="328"/>
        <source>Background</source>
        <translation type="obsolete">Fondo</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="371"/>
        <source>Manual Tracking</source>
        <translation type="obsolete">Espacio entre caracteres manual</translation>
    </message>
</context>
<context>
    <name>Editor</name>
    <message>
        <location filename="../editor.cpp" line="30"/>
        <source>Editor</source>
        <translation>Editor</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="36"/>
        <source>&amp;New</source>
        <translation>&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="39"/>
        <source>&amp;Open...</source>
        <translation>&amp;Abrir...</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="41"/>
        <source>Save &amp;As...</source>
        <translation>Gu&amp;ardar como...</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="43"/>
        <source>&amp;Save and Exit</source>
        <translation>&amp;Guardar y Salir</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="45"/>
        <source>&amp;Exit without Saving</source>
        <translation>&amp;Salir sin Guardar</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="47"/>
        <source>&amp;Undo</source>
        <translation>&amp;Deshacer</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="50"/>
        <source>&amp;Redo</source>
        <translation>Re&amp;hacer</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="52"/>
        <source>Cu&amp;t</source>
        <translation>Cor&amp;tar</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="55"/>
        <source>&amp;Copy</source>
        <translation>&amp;Copiar</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="58"/>
        <source>&amp;Paste</source>
        <translation>&amp;Pegar</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="61"/>
        <source>C&amp;lear</source>
        <translation>B&amp;orrar</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="63"/>
        <source>&amp;Get Field Names</source>
        <translation>&amp;Nombres de los campos</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="65"/>
        <source>&amp;File</source>
        <translation>&amp;Archivo</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="72"/>
        <source>&amp;Edit</source>
        <translation>&amp;Editar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Javascripts (*.js);;All Files (*)</source>
        <translation type="obsolete">Javascripts (*.js);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="127"/>
        <source>JavaScripts (*.js);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="37"/>
        <source>Ctrl+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="48"/>
        <source>Ctrl+Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="53"/>
        <source>Ctrl+X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="56"/>
        <source>Ctrl+C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../editor.cpp" line="59"/>
        <source>Ctrl-V</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EffectsDialog</name>
    <message>
        <location filename="../effectsdialog.cpp" line="41"/>
        <source>Image Effects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="78"/>
        <source>Options:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="95"/>
        <source>Color:</source>
        <translation type="unfinished">Color:</translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="106"/>
        <source>Shade:</source>
        <translation type="unfinished">Saturación:</translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="122"/>
        <source>Brightness:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="144"/>
        <source>Contrast:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="195"/>
        <source>Radius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="177"/>
        <source>Value:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="213"/>
        <source>Posterize:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="497"/>
        <source>Available Effects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1383"/>
        <source>Blur</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1361"/>
        <source>Brightness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1352"/>
        <source>Colorize</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1367"/>
        <source>Contrast</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="970"/>
        <source>Grayscale</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="972"/>
        <source>Invert</source>
        <translation type="unfinished">Invertir</translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1396"/>
        <source>Posterize</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1373"/>
        <source>Sharpen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="479"/>
        <source>&gt;&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="483"/>
        <source>&lt;&lt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="494"/>
        <source>Effects in use</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="608"/>
        <source>OK</source>
        <translation type="unfinished">Aceptar</translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="612"/>
        <source>Cancel</source>
        <translation type="unfinished">Cancelar</translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="348"/>
        <source>Color 1:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="368"/>
        <source>Color 2:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="388"/>
        <source>Color 3:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="408"/>
        <source>Color 4:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1402"/>
        <source>Duotone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1438"/>
        <source>Tritone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1489"/>
        <source>Quadtone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../effectsdialog.cpp" line="1555"/>
        <source>Curves</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExportBitmap</name>
    <message>
        <location filename="../plugins/pixmapexport/export.cpp" line="183"/>
        <source>File exists. Overwrite?</source>
        <translation type="unfinished">El archivo existe. ¿Sobreescribir?</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/export.cpp" line="184"/>
        <source>exists already. Overwrite?</source>
        <translation type="unfinished">ya exste. ¿Sobreescribir?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>All</source>
        <translation type="obsolete">Todos</translation>
    </message>
</context>
<context>
    <name>ExportForm</name>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="68"/>
        <source>Choose a Export Directory</source>
        <translation>Elige un Directorio donde Exportar</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="13"/>
        <source>Export as Image(s)</source>
        <translation>Exportar como Imagen(es)</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="153"/>
        <source>&amp;Export to Directory:</source>
        <translation>&amp;Exportar al Directorio</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="166"/>
        <source>C&amp;hange...</source>
        <translation>Cam&amp;biar...</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="25"/>
        <source>Options</source>
        <translation>Opciones</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="54"/>
        <source>Image &amp;Type:</source>
        <translation>&amp;Tipo de Imagen:</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="64"/>
        <source>&amp;Quality:</source>
        <translation>Cali&amp;dad:</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="74"/>
        <source>&amp;Resolution:</source>
        <translation>Resol&amp;ución:</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="84"/>
        <source>&amp;Size:</source>
        <translation>&amp;Tamaño:</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="126"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="110"/>
        <source> dpi</source>
        <translation> ppp</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="175"/>
        <source>Range</source>
        <translation>Rango</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="197"/>
        <source>&amp;Current page</source>
        <translation>Página &amp;Actual</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="224"/>
        <source>&amp;All pages</source>
        <translation>Todas las &amp;Páginas</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="217"/>
        <source>&amp;Range</source>
        <translation>&amp;Intervalo:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>C</source>
        <translation type="obsolete">C</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="105"/>
        <source>Export a range of pages</source>
        <translation>Exportar un intervalo de páginas</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="106"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation>Inserta una lista de elementos separados por comas,
donde un elemento puede ser * para todas las páginas,
1-5 para un intervalo de páginas o un único número.</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="107"/>
        <source>Export all pages</source>
        <translation>Exportar todas las páginas</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="108"/>
        <source>Export only the current page</source>
        <translation>Exportar sólo la página actual</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="109"/>
        <source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
        <translation>Resolución de las imágenes
Usa 72 ppp para imágenes dirigidas a verse en pantalla</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="110"/>
        <source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
        <translation>Tamaño de las imágenes. 100% para que no cambie, 200% para el doble de grande, etc.</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="111"/>
        <source>The quality of your images - 100% is the best, 1% the lowest quality</source>
        <translation>La calidad de las imágenes - 100% es la  mejor calidad, 1% la peor</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="112"/>
        <source>Available export formats</source>
        <translation>Formatos de exportación disponibles</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="113"/>
        <source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
        <translation>El directorio de salida - donde se almacenarán las imágenes.
El nombre del archivo será &apos;documento-página.tipo&apos;</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/dialog.cpp" line="114"/>
        <source>Change the output directory</source>
        <translation>Cambiar el directorio de salida</translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="44"/>
        <source>Image size in Pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/pixmapexport/exportform.ui" line="37"/>
        <source>TextLabel</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExtImageProps</name>
    <message>
        <location filename="../extimageprops.cpp" line="35"/>
        <source>Extended Image Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="95"/>
        <source>Normal</source>
        <translation type="unfinished">Normal</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="96"/>
        <source>Darken</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="97"/>
        <source>Lighten</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="98"/>
        <source>Hue</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="99"/>
        <source>Saturation</source>
        <translation type="unfinished">Saturación</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="100"/>
        <source>Color</source>
        <translation type="unfinished">Color</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="101"/>
        <source>Luminosity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="102"/>
        <source>Multiply</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="103"/>
        <source>Screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="104"/>
        <source>Dissolve</source>
        <translation type="unfinished">Disolver</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="105"/>
        <source>Overlay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="106"/>
        <source>Hard Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="107"/>
        <source>Soft Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="108"/>
        <source>Difference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="109"/>
        <source>Exclusion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="110"/>
        <source>Color Dodge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="111"/>
        <source>Color Burn</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="91"/>
        <source>Blend Mode:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="114"/>
        <source>Opacity:</source>
        <translation type="unfinished">Opacidad:</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="120"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="126"/>
        <source>Name</source>
        <translation type="unfinished">Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Background</source>
        <translation type="obsolete">Fondo</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="207"/>
        <source>Layers</source>
        <translation type="unfinished">Capas</translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="260"/>
        <source>Don&apos;t use any Path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../extimageprops.cpp" line="262"/>
        <source>Paths</source>
        <translation type="unfinished">Rutas</translation>
    </message>
</context>
<context>
    <name>FDialogPreview</name>
    <message>
        <location filename="../customfdialog.cpp" line="192"/>
        <source>Size:</source>
        <translation>Tamaño:</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="219"/>
        <source>Title:</source>
        <translation>Título:</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="222"/>
        <source>No Title</source>
        <translation>Sin título</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="224"/>
        <source>Author:</source>
        <translation>Autor:</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="227"/>
        <source>Unknown</source>
        <translation>Desconocido</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="229"/>
        <source>Scribus Document</source>
        <translation>Documento de Scribus</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="193"/>
        <source>Resolution:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="193"/>
        <source>DPI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="190"/>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="193"/>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="199"/>
        <source>Colorspace:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Farbmanager</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Colors</source>
        <translation type="obsolete">Colores</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Append</source>
        <translation type="obsolete">A&amp;ñadir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Editar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>D&amp;uplicate</source>
        <translation type="obsolete">&amp;Duplicar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Remove Unused</source>
        <translation type="obsolete">Borrar no &amp;usados</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Color Sets</source>
        <translation type="obsolete">Conjuntos de Colores</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Current Color Set:</source>
        <translation type="obsolete">Conjunto actual:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Save Color Set</source>
        <translation type="obsolete">&amp;Guardar Conjunto de Colores</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Choose a color set to load</source>
        <translation type="obsolete">Elige el conjunto de colores a cargar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save the current color set</source>
        <translation type="obsolete">Guarda el conjunto de colores actual</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation type="obsolete">Eliminar del conjunto de colores del documento los que no se usen</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Append colors to the current set from an existing document</source>
        <translation type="obsolete">Añadir colores de un documento existente al conjunto actual</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Create a new color within the current set</source>
        <translation type="obsolete">Crear un nuevo color en el actual conjunto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Edit the currently selected color</source>
        <translation type="obsolete">Editar el color seleccionado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Make a copy of the currently selected color</source>
        <translation type="obsolete">Hacer una copia del color seleccionado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete the currently selected color</source>
        <translation type="obsolete">Borrar el color seleccionado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Make the current colorset the default color set</source>
        <translation type="obsolete">Establecer el conjunto actual como el conjunto de colores por defecto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Choose a Name</source>
        <translation type="obsolete">Elige un nombre</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Open</source>
        <translation type="obsolete">Abrir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.sla.gz *.scd *.scd.gz);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.scd);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Copy of %1</source>
        <translation type="obsolete">Copia de %1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>New Color</source>
        <translation type="obsolete">Nuevo color</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>None</source>
        <translation type="obsolete">Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Import</source>
        <translation type="obsolete">&amp;Importar</translation>
    </message>
</context>
<context>
    <name>FileLoader</name>
    <message>
        <location filename="../fileloader.cpp" line="597"/>
        <source>Some fonts used by this document have been substituted:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fileloader.cpp" line="601"/>
        <source> was replaced by: </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontComboH</name>
    <message>
        <location filename="../fontcombo.cpp" line="136"/>
        <source>Face:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontcombo.cpp" line="137"/>
        <source>Style:</source>
        <translation type="unfinished">Estilo:</translation>
    </message>
</context>
<context>
    <name>FontPrefs</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Global Font Settings</source>
        <translation type="obsolete">Configuraciones globales de las fuentes</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="47"/>
        <source>Available Fonts</source>
        <translation>Fuentes Disponibles</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="47"/>
        <source>Font Substitutions</source>
        <translation>Sustituciones de Fuentes</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="47"/>
        <source>Additional Paths</source>
        <translation>Rutas Adicionales</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Postscript</source>
        <translation type="obsolete">Postscript</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Yes</source>
        <translation type="obsolete">Sí</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="88"/>
        <source>Font Name</source>
        <translation>Nombre de fuente</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="58"/>
        <source>Use Font</source>
        <translation type="unfinished">Usar fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Embed in:</source>
        <translation type="obsolete">Empotrar en:</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="60"/>
        <source>Subset</source>
        <translation type="unfinished">Subconjunto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Type</source>
        <translation type="obsolete">Tipo</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="61"/>
        <source>Path to Font File</source>
        <translation type="unfinished">Ruta al archivo de la fuente</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="80"/>
        <source>&amp;Available Fonts</source>
        <translation>Fuentes &amp;Disponibles</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="89"/>
        <source>Replacement</source>
        <translation>Reemplazo</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="104"/>
        <source>&amp;Delete</source>
        <translation>&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="110"/>
        <source>Font &amp;Substitutions</source>
        <translation>&amp;Sustituciones de Fuentes</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="129"/>
        <source>C&amp;hange...</source>
        <translation>Cam&amp;biar...</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="131"/>
        <source>A&amp;dd...</source>
        <translation>A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="133"/>
        <source>&amp;Remove</source>
        <translation>&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="157"/>
        <source>Additional &amp;Paths</source>
        <translation>&amp;Rutas Adicionales</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="300"/>
        <source>Choose a Directory</source>
        <translation>Elige un directorio</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="48"/>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">Nombre de fuente</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="49"/>
        <source>Use Font</source>
        <comment>font preview</comment>
        <translation type="obsolete">Usar fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Embed in:</source>
        <comment>font preview</comment>
        <translation type="obsolete">Empotrar en:</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="53"/>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">Subconjunto</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="55"/>
        <source>Path to Font File</source>
        <comment>font preview</comment>
        <translation type="obsolete">Ruta al archivo de la fuente</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="152"/>
        <source>Font search paths can only be set in File &gt; Preferences, and only when there is no document currently open. Close any open documents, then use File &gt; Preferences &gt; Fonts to change the font search path.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="59"/>
        <source>Embed in PostScript</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPreview</name>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="13"/>
        <source>Fonts Preview</source>
        <translation type="unfinished">Previsualizar Fuentes</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="222"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Append selected font into Style, Font menu</source>
        <translation type="obsolete">Añadir fuente seleccionada al menú Estilo, Fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Leave preview</source>
        <translation type="obsolete">Salir de la previsualización</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Woven silk pyjamas exchanged for blue quartz</source>
        <translation type="obsolete">Woven silk pyjamas exchanged for blue quartz</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Size of the Font</source>
        <translation type="obsolete">Tamaño de la fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">Nombre de fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Type</source>
        <comment>font preview</comment>
        <translation type="obsolete">Tipo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">Subconjunto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Fonts Preview</source>
        <comment>font preview</comment>
        <translation type="obsolete">Previsualizar Fuentes</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="57"/>
        <source>&amp;Search</source>
        <translation type="unfinished">&amp;Buscar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <comment>font preview</comment>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <comment>font preview</comment>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="164"/>
        <source>Append selected font into Style, Font menu</source>
        <comment>font preview</comment>
        <translation type="unfinished">Añadir fuente seleccionada al menú Estilo, Fuente</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="165"/>
        <source>Leave preview</source>
        <comment>font preview</comment>
        <translation type="unfinished">Salir de la previsualización</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="167"/>
        <source>Start searching</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="168"/>
        <source>Size of the selected font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="106"/>
        <source>Woven silk pyjamas exchanged for blue quartz</source>
        <comment>font preview</comment>
        <translation type="unfinished">Woven silk pyjamas exchanged for blue quartz</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="92"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="93"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="209"/>
        <source>&amp;Append</source>
        <translation type="unfinished">A&amp;ñadir</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="166"/>
        <source>Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="43"/>
        <source>Font Name</source>
        <translation type="unfinished">Nombre de fuente</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Doc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="45"/>
        <source>Type</source>
        <translation type="unfinished">Tipo</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="46"/>
        <source>Subset</source>
        <translation type="unfinished">Subconjunto</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="47"/>
        <source>Access</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="41"/>
        <source>&amp;Quick Search:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="60"/>
        <source>Alt+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="125"/>
        <source>&amp;Font Size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="148"/>
        <source>Text</source>
        <translation type="unfinished">Texto</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="158"/>
        <source>Sample text to display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="165"/>
        <source>Se&amp;t</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="168"/>
        <source>Alt+T</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="175"/>
        <source>Reset the text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="212"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="219"/>
        <source>&amp;Close</source>
        <translation type="unfinished">&amp;Cerrar</translation>
    </message>
</context>
<context>
    <name>FontPreviewBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Fonts Preview</source>
        <translation type="obsolete">Previsualizar Fuentes</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Search</source>
        <translation type="obsolete">&amp;Buscar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Font Name</source>
        <translation type="obsolete">Nombre de fuente</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Type</source>
        <translation type="obsolete">Tipo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Subset</source>
        <translation type="obsolete">Subconjunto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Text</source>
        <translation type="obsolete">Texto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Append</source>
        <translation type="obsolete">A&amp;ñadir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>FontPreviewPlugin</name>
    <message>
        <location filename="../plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
        <source>&amp;Font Preview...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreviewplugin.cpp" line="65"/>
        <source>Font Preview dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreviewplugin.cpp" line="66"/>
        <source>Sorting, searching and browsing available fonts.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontReplaceDialog</name>
    <message>
        <location filename="../fontreplacedialog.cpp" line="29"/>
        <source>Font Substitution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="44"/>
        <source>Original Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="45"/>
        <source>Substitution Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="71"/>
        <source>Make these substitutions permanent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="39"/>
        <source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="82"/>
        <source>Cancels these font substitutions and stops loading the document.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="83"/>
        <source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit &gt; Preferences &gt; Fonts.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../fontreplacedialog.cpp" line="84"/>
        <source>If you select OK, then save, these substitutions are made permanent in the document.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GradientEditor</name>
    <message>
        <location filename="../gradienteditor.cpp" line="313"/>
        <source>Position:</source>
        <translation>Posición:</translation>
    </message>
    <message>
        <location filename="../gradienteditor.cpp" line="314"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Here you can add, change or remove Color-Stops.</source>
        <translation type="obsolete">Aquí puedes añadir, cambiar o eliminar límites de colores.</translation>
    </message>
    <message>
        <location filename="../gradienteditor.cpp" line="312"/>
        <source>Add, change or remove color stops here</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManager</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Manage Guides</source>
        <translation type="obsolete">Administrar Guías</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Horizontal Guides</source>
        <translation type="obsolete">Guías horizontales</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Y-Pos:</source>
        <translation type="obsolete">Posicón &amp;Y:</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="60"/>
        <source>&amp;Add</source>
        <translation type="unfinished">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="70"/>
        <source>D&amp;elete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Vertical Guides</source>
        <translation type="obsolete">Guías verticales</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;X-Pos:</source>
        <translation type="obsolete">Posición &amp;X:</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="107"/>
        <source>A&amp;dd</source>
        <translation type="unfinished">Aña&amp;dir...</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="117"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="132"/>
        <source>&amp;Lock Guides</source>
        <translation type="unfinished">B&amp;loquear las guías</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="332"/>
        <source>&amp;Page</source>
        <translation type="unfinished">&amp;Página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Preview</source>
        <translation type="obsolete">Previsualizar</translation>
    </message>
    <message>
        <location filename="../guidemanager.cpp" line="229"/>
        <source>Edit Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.cpp" line="257"/>
        <source>Enter a position:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.cpp" line="256"/>
        <source>New Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="28"/>
        <source>&amp;Single</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="159"/>
        <source>Horizontals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="99"/>
        <source>Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="407"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="358"/>
        <source>Alt+E</source>
        <translation type="unfinished">Alt+E</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="265"/>
        <source>Verticals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="110"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+B</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="135"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="371"/>
        <source>Appl&amp;y to All Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="374"/>
        <source>Alt+Y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="153"/>
        <source>&amp;Column/Row</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="168"/>
        <source>&amp;Number:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="191"/>
        <source>U&amp;se Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="194"/>
        <source>Alt+S</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="323"/>
        <source>Refer To</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="394"/>
        <source>Alt+P</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="345"/>
        <source>M&amp;argins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="355"/>
        <source>S&amp;election</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="274"/>
        <source>Nu&amp;mber:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="297"/>
        <source>Use &amp;Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="300"/>
        <source>Alt+G</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="382"/>
        <source>&amp;Misc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="388"/>
        <source>Delete all guides from the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="391"/>
        <source>Delete Guides from Current &amp;Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="401"/>
        <source>Delete all guides from the current document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="404"/>
        <source>Delete Guides from &amp;All Pages</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManagerBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Manage Guides</source>
        <translation type="obsolete">Administrar Guías</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Add</source>
        <translation type="obsolete">A&amp;ñadir...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>D&amp;elete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+E</source>
        <translation type="obsolete">Alt+E</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>A&amp;dd</source>
        <translation type="obsolete">Aña&amp;dir...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+B</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">B&amp;orrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Lock Guides</source>
        <translation type="obsolete">B&amp;loquear las guías</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Page</source>
        <translation type="obsolete">&amp;Página</translation>
    </message>
</context>
<context>
    <name>HelpBrowser</name>
    <message>
        <location filename="../helpbrowser.cpp" line="457"/>
        <source>Contents</source>
        <translation type="obsolete">Contenidos</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="343"/>
        <source>Link</source>
        <translation type="obsolete">Enlace</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="264"/>
        <source>Scribus Online Help</source>
        <translation>Ayuda de Scribus en línea</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="265"/>
        <source>Sorry, no manual available! Please see: http://docs.scribus.net for updated docs
and www.scribus.net for downloads.</source>
        <translation>Lo siento, no hay ningún manual disponible. Por favor mira: http://docs.scribus.net para documentación actualizada y www.scribus.net para descargas.</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="31"/>
        <source>&amp;Contents</source>
        <translation>&amp;Contenidos</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="60"/>
        <source>&amp;Search</source>
        <translation>&amp;Buscar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>S&amp;earch</source>
        <translation type="obsolete">B&amp;uscar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Ctrl+F</source>
        <translation type="obsolete">Ctrl+F</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>F3</source>
        <translation type="obsolete">F3</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>unknown</source>
        <translation type="obsolete">desconocido</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="324"/>
        <source>Find</source>
        <translation>Buscar</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="324"/>
        <source>Search Term:</source>
        <translation>Término de búsqueda:</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="45"/>
        <source>Se&amp;arch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="96"/>
        <source>&amp;New</source>
        <translation type="unfinished">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="178"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="79"/>
        <source>Book&amp;marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="148"/>
        <source>&amp;Print...</source>
        <translation type="unfinished">&amp;Imprimir...</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="216"/>
        <source>E&amp;xit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="356"/>
        <source>New Bookmark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="356"/>
        <source>New Bookmark&apos;s Title:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="208"/>
        <source>&amp;File</source>
        <translation type="unfinished">&amp;Archivo</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="158"/>
        <source>&amp;Find...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="218"/>
        <source>Find &amp;Next</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="219"/>
        <source>Find &amp;Previous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="209"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">&amp;Editar</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="220"/>
        <source>&amp;Add Bookmark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="183"/>
        <source>D&amp;elete All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="210"/>
        <source>&amp;Bookmarks</source>
        <translation type="unfinished">&amp;Marcadores</translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="137"/>
        <source>Scribus Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="53"/>
        <source>Searching is case insensitive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="86"/>
        <source>1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="153"/>
        <source>&amp;Exit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="163"/>
        <source>Find &amp;Next...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="168"/>
        <source>Find &amp;Previous...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/helpbrowser.ui" line="173"/>
        <source>&amp;Add</source>
        <translation type="unfinished">A&amp;ñadir...</translation>
    </message>
</context>
<context>
    <name>HelpBrowser2</name>
    <message>
        <location filename="../ui/hb2.ui" line="13"/>
        <source>Dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="30"/>
        <source>&amp;Contents</source>
        <translation type="unfinished">&amp;Contenidos</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="84"/>
        <source>1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="49"/>
        <source>Se&amp;arch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="57"/>
        <source>Searching is case insensitive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="64"/>
        <source>&amp;Search</source>
        <translation type="unfinished">&amp;Buscar</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="77"/>
        <source>Book&amp;marks</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HyAsk</name>
    <message>
        <location filename="../hyask.cpp" line="46"/>
        <source>Possible Hyphenation</source>
        <translation>Posible División</translation>
    </message>
    <message>
        <location filename="../hyask.cpp" line="65"/>
        <source>Accept</source>
        <translation>Aceptar</translation>
    </message>
    <message>
        <location filename="../hyask.cpp" line="71"/>
        <source>Skip</source>
        <translation>Saltar</translation>
    </message>
    <message>
        <location filename="../hyask.cpp" line="76"/>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
</context>
<context>
    <name>HySettings</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Hyphenator Settings</source>
        <translation type="obsolete">Configuraciones del Divisor de Palabras</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="20"/>
        <source>&amp;Hyphenation Suggestions</source>
        <translation>Sugerencias de &amp;División</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="23"/>
        <source>Hyphenate Text Automatically &amp;During Typing</source>
        <translation>Dividir Texto &amp;Automáticamente Mientras se Escribe</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="40"/>
        <source>&amp;Language:</source>
        <translation>&amp;Idioma:</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="46"/>
        <source>&amp;Smallest Word:</source>
        <translation>Palabra más &amp;pequeña:</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="52"/>
        <source>Consecutive Hyphenations &amp;Allowed:</source>
        <translation>Divisiones Consecutivas Per&amp;mitidas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="56"/>
        <source>A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option.</source>
        <translation>Cuando use la opción Extras, Dividir en Sílabas, se mostrará para cada palabra un cuadro de diálogo con las posibles divisiones.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="57"/>
        <source>Enables automatic hyphenation of your text while typing.</source>
        <translation>Activa la división silábica automática mientras escribe.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="58"/>
        <source>Length of the smallest word to be hyphenated.</source>
        <translation>Longitud mínima que debe tener una palabra para dividirla.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="59"/>
        <source>Maximum number of Hyphenations following each other.
A value of 0 means unlimited hyphenations.</source>
        <translation>Máximo número de divisiones seguidas.
Un valor de 0 significa divisiones ilimitadas.</translation>
    </message>
</context>
<context>
    <name>ImageInfoDialog</name>
    <message>
        <location filename="../imageinfodialog.cpp" line="24"/>
        <source>Image Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="31"/>
        <source>General Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="35"/>
        <source>Date / Time:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="39"/>
        <source>Has Embedded Profile:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Yes</source>
        <translation type="obsolete">Sí</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>No</source>
        <translation type="obsolete">No</translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="47"/>
        <source>Profile Name:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="51"/>
        <source>Has Embedded Paths:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="59"/>
        <source>Has Layers:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="70"/>
        <source>EXIF Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="85"/>
        <source>Artist:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="127"/>
        <source>Comment:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="128"/>
        <source>User Comment:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="129"/>
        <source>Camera Model:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="130"/>
        <source>Camera Manufacturer:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="136"/>
        <source>Description:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="137"/>
        <source>Copyright:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="138"/>
        <source>Scanner Model:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="139"/>
        <source>Scanner Manufacturer:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="131"/>
        <source>Exposure time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="132"/>
        <source>Aperture:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../imageinfodialog.cpp" line="133"/>
        <source>ISO equiv.:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <location filename="../smstyleimport.cpp" line="30"/>
        <source>Choose Styles</source>
        <translation type="unfinished">Elegir Estilos</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="35"/>
        <source>Available Styles</source>
        <translation type="unfinished">Estilos Disponibles</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="40"/>
        <source>Character Styles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="49"/>
        <source>Paragraph Styles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="58"/>
        <source>Line Styles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="76"/>
        <source>In case of a name clash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="77"/>
        <source>Rename imported style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="79"/>
        <source>Replace existing style</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportPSPlugin</name>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="57"/>
        <source>Import &amp;EPS/PS...</source>
        <translation type="unfinished">Importar &amp;EPS/PS...</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="78"/>
        <source>Imports EPS Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="79"/>
        <source>Imports most EPS files into the current document,
converting their vector data into Scribus objects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="105"/>
        <source>PDF</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsPage</name>
    <message>
        <location filename="../inspage.cpp" line="30"/>
        <source>Insert Page</source>
        <translation>Insertar página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Inserting</source>
        <translation type="obsolete">&amp;Insertar</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="43"/>
        <source>Page(s)</source>
        <translation>página(s)</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="47"/>
        <source>before Page</source>
        <translation>antes de la página</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="48"/>
        <source>after Page</source>
        <translation>después de la página</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="49"/>
        <source>at End</source>
        <translation>al final</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Inserting</source>
        <translation type="obsolete">Insertando</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Template (Left Page):</source>
        <translation type="obsolete">&amp;Plantilla (página izquierda):</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Template:</source>
        <translation type="obsolete">&amp;Plantilla:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Template (Right Page):</source>
        <translation type="obsolete">Plantilla (página derecha):</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="59"/>
        <source>&amp;Insert</source>
        <translation type="unfinished">&amp;Insertar</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="63"/>
        <source>Master Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="73"/>
        <source>&amp;Master Page:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="199"/>
        <source>Page Size</source>
        <translation type="unfinished">Formato de página</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="203"/>
        <source>&amp;Size:</source>
        <translation type="unfinished">&amp;Tamaño:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Custom</source>
        <translation type="obsolete">Personalizado</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="219"/>
        <source>Orie&amp;ntation:</source>
        <translation type="unfinished">&amp;Orientación:</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="222"/>
        <source>Portrait</source>
        <translation type="unfinished">Vertical</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="223"/>
        <source>Landscape</source>
        <translation type="unfinished">Apaisado</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="229"/>
        <source>&amp;Width:</source>
        <translation type="unfinished">Anc&amp;hura:</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="236"/>
        <source>&amp;Height:</source>
        <translation type="unfinished">Al&amp;tura:</translation>
    </message>
    <message>
        <location filename="../inspage.cpp" line="240"/>
        <source>Move Objects with their Page</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsertAFrame</name>
    <message>
        <location filename="../insertaframe.cpp" line="201"/>
        <source>Open</source>
        <translation type="unfinished">Abrir</translation>
    </message>
    <message>
        <location filename="../insertaframe.cpp" line="111"/>
        <source>&lt;b&gt;Insert a text frame&lt;/b&gt;&lt;br/&gt;A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.&lt;br/&gt;Your text may be edited and formatted on the page directly or in the simple Story Editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.cpp" line="115"/>
        <source>&lt;b&gt;Insert an image frame&lt;/b&gt;&lt;br/&gt;An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="13"/>
        <source>Insert A Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="29"/>
        <source>T&amp;ype</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="61"/>
        <source>&amp;Text Frame</source>
        <translation type="unfinished">Marco de &amp;texto</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="68"/>
        <source>&amp;Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="83"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="96"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="116"/>
        <source>Polygon</source>
        <translation type="obsolete">Polígono</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="97"/>
        <source>&amp;Location</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="109"/>
        <source>Page Placement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="121"/>
        <source>Current Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="128"/>
        <source>All Pages</source>
        <translation type="unfinished">Todas</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="606"/>
        <source>...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="178"/>
        <source>Position of Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="190"/>
        <source>Top Left of Margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="197"/>
        <source>Top Left of Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="204"/>
        <source>Top Left of Bleed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="257"/>
        <source>X:</source>
        <translation type="unfinished">X:</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="250"/>
        <source>Y:</source>
        <translation type="unfinished">Y:</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="304"/>
        <source>&amp;Size</source>
        <translation type="unfinished">&amp;Tamaño</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="328"/>
        <source>Same as the Page Margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="335"/>
        <source>Same as the Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="342"/>
        <source>Same as the Bleed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="349"/>
        <source>Same as the Imported Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="395"/>
        <source>Height:</source>
        <translation type="unfinished">Altura:</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="402"/>
        <source>Width:</source>
        <translation type="unfinished">Anchura:</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="449"/>
        <source>&amp;Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="596"/>
        <source>Source Image:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="638"/>
        <source>There are no options for this type of frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="507"/>
        <source>Columns:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="497"/>
        <source>Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="531"/>
        <source>Link Created Frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="546"/>
        <source>Source Document:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="974"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="990"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="135"/>
        <source>Range of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="211"/>
        <source>Custom Position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="356"/>
        <source>Custom Size</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsertAFrameBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Text Frame</source>
        <translation type="obsolete">Marco de &amp;texto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Polygon</source>
        <translation type="obsolete">Polígono</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>X:</source>
        <translation type="obsolete">X:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Size</source>
        <translation type="obsolete">&amp;Tamaño</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Height:</source>
        <translation type="obsolete">Altura:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Width:</source>
        <translation type="obsolete">Anchura:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>All Pages</source>
        <translation type="obsolete">Todas</translation>
    </message>
</context>
<context>
    <name>InsertTable</name>
    <message>
        <location filename="../insertTable.cpp" line="16"/>
        <source>Insert Table</source>
        <translation>Insertar tabla</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Number of Rows:</source>
        <translation type="obsolete">Número de filas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Number of Columns:</source>
        <translation type="obsolete">Número de columnas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>OK</source>
        <translation type="obsolete">Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Cancel</source>
        <translation type="obsolete">Cancelar</translation>
    </message>
    <message>
        <location filename="../insertTable.cpp" line="29"/>
        <source>Number of rows:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../insertTable.cpp" line="30"/>
        <source>Number of columns:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>JavaDocs</name>
    <message>
        <location filename="../javadocs.cpp" line="28"/>
        <source>Edit JavaScripts</source>
        <translation>Editar JavaScripts</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="47"/>
        <source>&amp;Edit...</source>
        <translation>&amp;Editar...</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="50"/>
        <source>&amp;Add...</source>
        <translation>&amp;Añadir...</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="53"/>
        <source>&amp;Delete</source>
        <translation>&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="58"/>
        <source>&amp;Close</source>
        <translation>&amp;Cerrar</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="78"/>
        <source>&amp;New Script:</source>
        <translation>&amp;Nuevo Script:</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="79"/>
        <source>New Script</source>
        <translation>Nuevo Script</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Do you really want to delete this Script?</source>
        <translation type="obsolete">¿Realmente desea borrar este Script?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;No</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Sí</translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="124"/>
        <source>Do you really want to delete this script?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../javadocs.cpp" line="72"/>
        <source>Adds a new Script, predefines a function with the same name. If you want to use this script as an &quot;Open Action&quot; script be sure not to change the name of the function.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>KeyManager</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Manage Keyboard Shortcuts</source>
        <translation type="obsolete">Configurar accesos rápidos</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Action</source>
        <translation type="obsolete">Acción</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Current Key</source>
        <translation type="obsolete">Tecla Actual</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Select a Key for this Action</source>
        <translation type="obsolete">Acceso rápido para la acción seleccionada</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;No Key</source>
        <translation type="obsolete">&amp;Ninguno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;User Defined Key</source>
        <translation type="obsolete">Definido por el &amp;usuario</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>ALT+SHIFT+T</source>
        <translation type="obsolete">ALT+SHIFT+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Set &amp;Key</source>
        <translation type="obsolete">&amp;Definir</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt</source>
        <translation type="obsolete">Alt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Ctrl</source>
        <translation type="obsolete">Ctrl</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Shift</source>
        <translation type="obsolete">Mays</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Shift+</source>
        <translation type="obsolete">Mays+</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+</source>
        <translation type="obsolete">Alt+</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Ctrl+</source>
        <translation type="obsolete">Ctrl+</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>This Key Sequence is already in use</source>
        <translation type="obsolete">Ésta combinación de teclas ya está en uso</translation>
    </message>
</context>
<context>
    <name>LayerPalette</name>
    <message>
        <location filename="../layers.cpp" line="485"/>
        <source>Layers</source>
        <translation>Capas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Add a new Layer</source>
        <translation type="obsolete">Añadir una nueva Capa</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="275"/>
        <source>Delete Layer</source>
        <translation>Borrar Capa</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Raise Layer</source>
        <translation type="obsolete">Subir Capa</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Lower Layer</source>
        <translation type="obsolete">Bajar Capa</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>New Layer</source>
        <translation type="obsolete">Nueva Capa</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Do you want to delete all Objects on this Layer too?</source>
        <translation type="obsolete">¿Desea borrar también todos los objetos de esta capa?</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="276"/>
        <source>Do you want to delete all objects on this layer too?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="506"/>
        <source>Name</source>
        <translation type="unfinished">Nombre:</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="512"/>
        <source>Add a new layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="514"/>
        <source>Delete layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="515"/>
        <source>Raise layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="516"/>
        <source>Lower layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="504"/>
        <source>Opacity:</source>
        <translation type="unfinished">Opacidad:</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="505"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="486"/>
        <source>Blend Mode:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="488"/>
        <source>Normal</source>
        <translation type="unfinished">Normal</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="489"/>
        <source>Darken</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="490"/>
        <source>Lighten</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="491"/>
        <source>Multiply</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="492"/>
        <source>Screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="493"/>
        <source>Overlay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="494"/>
        <source>Hard Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="495"/>
        <source>Soft Light</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="496"/>
        <source>Difference</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="498"/>
        <source>Color Dodge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="499"/>
        <source>Color Burn</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="497"/>
        <source>Exclusion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="500"/>
        <source>Hue</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="501"/>
        <source>Saturation</source>
        <translation type="unfinished">Saturación</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="502"/>
        <source>Color</source>
        <translation type="unfinished">Color</translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="503"/>
        <source>Luminosity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="513"/>
        <source>Duplicates the current layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="517"/>
        <source>Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="518"/>
        <source>Make Layer Visible - Uncheck to hide the layer from the display </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="519"/>
        <source>Print Layer - Uncheck to disable printing. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="520"/>
        <source>Lock or Unlock Layer - Unchecked is unlocked </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="521"/>
        <source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="522"/>
        <source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../layers.cpp" line="523"/>
        <source>Name of the Layer - Double clicking on the name of a layer enabled editing</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LineFormate</name>
    <message>
        <location filename="../lineformats.cpp" line="33"/>
        <source>Edit Line Styles</source>
        <translation type="obsolete">Editar Estilos de Línea</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Append</source>
        <translation type="obsolete">A&amp;ñadir</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="52"/>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="55"/>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Editar</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="60"/>
        <source>D&amp;uplicate</source>
        <translation type="obsolete">&amp;Duplicar</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="64"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="68"/>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;Guardar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="125"/>
        <source>Copy of %1</source>
        <translation type="obsolete">Copia de %1</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="154"/>
        <source>New Style</source>
        <translation type="obsolete">Nuevo Estilo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Do you really want to delete this Style?</source>
        <translation type="obsolete">¿Realmente desea borrar este Estilo?</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;No</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Sí</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="216"/>
        <source>Open</source>
        <translation type="obsolete">Abrir</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="216"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.sla.gz *.scd *.scd.gz);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.scd);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="49"/>
        <source>&amp;Import</source>
        <translation type="obsolete">&amp;Importar</translation>
    </message>
</context>
<context>
    <name>LineStyleW</name>
    <message>
        <location filename="../smlinestylew.ui" line="184"/>
        <source>%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestylew.ui" line="208"/>
        <source>Line Width:</source>
        <translation type="unfinished">Ancho de linea:</translation>
    </message>
</context>
<context>
    <name>LineStyleWBase</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Line Width:</source>
        <translation type="obsolete">Ancho de linea:</translation>
    </message>
</context>
<context>
    <name>LineStyleWidget</name>
    <message>
        <location filename="../smlinestyle.cpp" line="180"/>
        <source> pt</source>
        <translation type="unfinished"> pt</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="52"/>
        <source>Flat Cap</source>
        <translation type="unfinished">Plano</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="53"/>
        <source>Square Cap</source>
        <translation type="unfinished">Cuadrado</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="54"/>
        <source>Round Cap</source>
        <translation type="unfinished">Redondeado</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="56"/>
        <source>Miter Join</source>
        <translation type="unfinished">Unión de inglete</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="57"/>
        <source>Bevel Join</source>
        <translation type="unfinished">Unión biselada</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="58"/>
        <source>Round Join</source>
        <translation type="unfinished">Unión redondeada</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Solid Line</source>
        <translation type="obsolete">Línea sólida</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Dashed Line</source>
        <translation type="obsolete">Línea a trazos</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Dotted Line</source>
        <translation type="obsolete">Línea a puntos</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Dash Dot Line</source>
        <translation type="obsolete">Línea raya punto</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Dash Dot Dot Line</source>
        <translation type="obsolete">Línea raya punto punto</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="70"/>
        <source>Add a new line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="71"/>
        <source>Remove a line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="72"/>
        <source>Line style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="73"/>
        <source>Line width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="74"/>
        <source>End style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="75"/>
        <source>Join style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="76"/>
        <source>Line color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="77"/>
        <source>Line shade</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LoadSavePlugin</name>
    <message>
        <location filename="../loadsaveplugin.cpp" line="81"/>
        <source>All Files (*)</source>
        <translation type="unfinished">Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../loadsaveplugin.cpp" line="80"/>
        <source>No File Loader Plugins Found</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LoremManager</name>
    <message>
        <location filename="../loremipsum.cpp" line="118"/>
        <source>Select Lorem Ipsum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="183"/>
        <source>Author:</source>
        <translation type="unfinished">Autor:</translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="185"/>
        <source>Get More:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="187"/>
        <source>XML File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="206"/>
        <source>Lorem Ipsum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="207"/>
        <source>Paragraphs:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="209"/>
        <source>Alt+O</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="211"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../loremipsum.cpp" line="212"/>
        <source>Standard Lorem Ipsum</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MSpinBox</name>
    <message>
        <location filename="" line="136965632"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>pt</source>
        <translation type="obsolete">pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>mm</source>
        <translation type="obsolete">mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>in</source>
        <translation type="obsolete">in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>p</source>
        <translation type="obsolete">p</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
</context>
<context>
    <name>Macro</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Passed object is not callable</source>
        <comment>python error</comment>
        <translation type="obsolete">El objeto pasado no se puede llamar</translation>
    </message>
</context>
<context>
    <name>MacroManager</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Manage Macros</source>
        <translation type="obsolete">Administrar Macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Brings up a graphical window for creating, deleting, editing, saving and loading macros.</source>
        <translation type="obsolete">Muestra una ventana para crear, borrar, editar, guardar y cargar macros.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Create, edit and delete macros</source>
        <translation type="obsolete">Crear, editar y borrar macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Macro</source>
        <translation type="obsolete">&amp;Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Macro Manager</source>
        <translation type="obsolete">Scribus - Macro Manager</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Unable to open the requested file: %1</source>
        <translation type="obsolete">No puedo abrir el archivo solicitado: %1</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Edit Macro</source>
        <translation type="obsolete">Scribus - Editar Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;The macro name you requested is already taken  by another macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;El nombre de la macro solicitada ya está elegido por otra macro.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Macro creation failed. The macro manager was unable to set up the macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;La creación de la macro falló. El administrador de macros no pudo configurar la macro.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The macro &apos;%1&apos; has reported a minor error.
The error is: %2
A full traceback follows:

%3
</source>
        <translation type="obsolete">La macro &apos;%1&apos; ha informado de un error menor. 
El error es :%2 
A continuación se muestra una traza completa: 

%3
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>The macro &apos;%1&apos; failed to execute correctly.
The error is: %2
A full traceback follows:

%3
</source>
        <translation type="obsolete">La macro &apos;%1&apos; no se ha ejecutado correctamente.
El error es :%2 
A continuación se muestra una traza completa: 

%3
</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - New Macro</source>
        <translation type="obsolete">Scribus - Nueva Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Enter name for new macro: </source>
        <translation type="obsolete">Introduce el nombre de la nueva macro:</translation>
    </message>
</context>
<context>
    <name>ManageMacrosDialog</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Macro Manager</source>
        <translation type="obsolete">Scribus - Administrador de Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Renaming the macro failed because the name is already in use.</source>
        <translation type="obsolete">Renombrar la macro falló porque el nombre ya se está usando.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Manage Macros</source>
        <translation type="obsolete">Scribus - Administrar Macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;&lt;p&gt;This window is the Scribus Macro Manager. Here you can create macros, edit macros, etc. All changes are made using the buttons on the right hand side of the window.&lt;/p&gt;
&lt;p&gt;All changes made in this dialog take effect instantly - you cannot cancel the actions you make here.
The table in the center of the dialog lists what macros are currently loaded and some information about them. Use &quot;What&apos;s this&quot; on the table for more information.&lt;/p&gt;&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;&lt;p&gt;Esta ventana es el Administrador de Macros de Scribus. Aquí puedes crear macros, editar macros, etc. Todos los cambios se realizan usando los botones de la derecha.&lt;/p&gt; 
&lt;p&gt;Todos los cambios realizados en este diálogo tienen efecto instantáneamente - no puedes cancelar las acciones que haces aquí. La tabla del centro muestra las macros actualmente cargadas y algo de información sobre ellas. Usa &quot;What&apos;s This&quot; en la tabla para más información.&lt;/p&gt;&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nuevo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+N</source>
        <translation type="obsolete">Alt+N</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Create a new macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Crear una nueva macro.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Create a new macro by prompting for the macro name then bringing up the edit macro dialog box.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Crear una nueva macro preguntando el nombre de la macro y abriendo el cuadro de diálogo de edición.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Ok</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Macro</source>
        <translation type="obsolete">Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Edit</source>
        <translation type="obsolete">Editable</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Accel</source>
        <translation type="obsolete">Acceso rápido</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Description</source>
        <translation type="obsolete">Descripción</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;This table lists the macros that are currently defined.&lt;/p&gt;

&lt;p&gt;&lt;b&gt;Name:&lt;/b&gt; The name of the macro, as shown in the menu bar and in other places around Scribus.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Edit:&lt;/b&gt; If the macro can be edited, &quot;Yes&quot; appears in this column. Usually if a macro cannot be edited it was created using the register_macro command in a script.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Accel:&lt;/b&gt; The menu shortcut key sequence, if any, associated with the macro. For example, CTRL-F8 means that you can press Control-F8 when in Scribus to run the macro.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Description:&lt;/b&gt; If the macro contains a &quot;docstring&quot;, a special string at the start of its definition that describes it, that is shown here. If the docstring is long, only the beginning is shown - use &quot;What&apos;s This&quot; on the macro&apos;s entry in the Macro menu to see the full description.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Está tabla muestra las macros que actualmente están definidas.&lt;/p&gt; 

&lt;p&gt;&lt;b&gt;Macro:&lt;/b&gt; El nombre de la macro, como se muestra en la barra de menús y en otros lugares de Scribus.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Editable:&lt;/b&gt; Si la macro se puede editar, en este columna aparecerá &quot;Sí&quot;. Normalmente si una macro no se puede editar fue creada con el comando register_macro en un script.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Acceso rápido:&lt;/b&gt; La secuencia de acceso rápido asociada con la macro, si tiene. Por ejemplo, CTRL-F8 significa que puedes presionar Control-F8 desde Scribus para ejecutar la macro.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Descripción:&lt;/b&gt; Si la macro contiene un &quot;docstring&quot;, una cadena especial al principio de su definición que la describe, que se muestra aquí. Si la descripción es larga, sólo se muestra el principio - usa &quot;What&apos;s This&quot; en la entrada de la macro en el menú Macro para ver la descripción completa.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Rena&amp;me</source>
        <translation type="obsolete">Reno&amp;mbrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+M</source>
        <translation type="obsolete">Alt+M</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Rename the selected macro.</source>
        <translation type="obsolete">Renombra la macro seleccionada</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Rename the selected macro. You will be prompted for the new name.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Renombra la macro seleccionada. Se te preguntará el nuevo nombre.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Edit...</source>
        <translation type="obsolete">&amp;Editar...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+E</source>
        <translation type="obsolete">Alt+E</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Edit the source of the selected macro, if the source is availible.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Editar el código de la macro seleccionado, si está disponible.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Borrar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+B</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Delete the currently selected macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Borrar la macro seleccionada actualmente.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Delete the selected macro. This is instant, and there is no way to recover the macro once deleted. If the macro is created by a start-up script, it will reappear next time you load Scribus.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Borrar la macro seleccionada. Es instántaneo y no hay ningún modo de recuperar la macro una vez borrada. Si la macro se crea por un script de inicio, reaparecerá la próxima de vez que se arranque Scribus.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Set Accel</source>
        <translation type="obsolete">E&amp;stablecer Acceso Rápido</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;qt&gt;Set the keyboard shortcut for the selected macro.&lt;/qt&gt;</source>
        <translation type="obsolete">&lt;qt&gt;Asigna un acceso rápido para la macro seleccionada.&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Set the keyboard shortcut (accelerator) key of the selected macro. You will be prompted for the new shortcut in a dialog box.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Asigna un acceso rápido para la macro seleccionada. Se te preguntará el nuevo acceso rápido en un cuadro de diálogo.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>E&amp;xport</source>
        <translation type="obsolete">E&amp;xportar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+X</source>
        <translation type="obsolete">Alt+X</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Export macros to a file.</source>
        <translation type="obsolete">Exporta las macros a un archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Export macros to an external file. The file will be a Python script containing the scripter commands to re-create the macros. It can be run using &lt;tt&gt;Load extension script&lt;/tt&gt; from the &lt;tt&gt;Script&lt;/tt&gt; menu, or the import button in the macro manager.&lt;/p&gt;
&lt;p&gt;If you want a nice, human readable version of your macros, select the macro you want, press the &lt;tt&gt;Edit&lt;/tt&gt;  button, and use the &lt;tt&gt;Save source&lt;/tt&gt; button in the &lt;tt&gt;Edit Macro&lt;/tt&gt; dialog. You won&apos;t be able to load that version with &lt;tt&gt;Load extension script&lt;/tt&gt; - instead, create a new macro with the&lt;tt&gt; New&lt;/tt&gt; button and use &lt;tt&gt;Load source&lt;/tt&gt;.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Exportar macros a un archivo externo. El archvio será un script de Python que contendrá los comandos de scripter para recrear las macros. Se puede ejecutar usando &lt;tt&gt;Cargar Script de Extensión&lt;/tt&gt; desde el menú &lt;tt&gt;Script&lt;/tt&gt;, o el botón importar en el administrador de macros.&lt;/p&gt;
&lt;p&gt;Si quieres una versión legible por humanos de tus macros, selecciona la macro que quieres y presiona el botón &lt;tt&gt;Edit&lt;/tt&gt; y usa el botón &lt;tt&gt;Guardar código&lt;/tt&gt; en el diálogo &lt;tt&gt;Editar Macro&lt;/tt&gt;. No podrás cargar esa versión con &lt;tt&gt;Cargar Script de Extensión&lt;/tt&gt; - sin embargo, podrás crear una nueva macro con el botón &lt;tt&gt;Nuevo&lt;/tt&gt; y usar &lt;tt&gt;Cargar código&lt;/tt&gt;.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete &amp;All</source>
        <translation type="obsolete">Borrar &amp;Todas</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Delete all macros.</source>
        <translation type="obsolete">Borra todas las macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Delete all registered macros. This is instant, and there is no way to recover the deleted macros. Any macros created by your start-up script will reappear next time you load Scribus.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Borra todas las macros registradas. Es instántaneo y no hay ningún modo de recuperar las macros borradas. 
Cualesquiera macros que se creen mediante un script de inicio reaparecerán la próxima vez que se inicie Scribus.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Import</source>
        <translation type="obsolete">&amp;Importar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Import macros from a file.</source>
        <translation type="obsolete">Importa las macros de un archivo.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Loads macros from an external file.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Carga las macros de un archivo externo.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Close this dialog</source>
        <translation type="obsolete">Cerrar este diálogo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Return to Scribus</source>
        <translation type="obsolete">Volver a Scribus</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&lt;p&gt;Edit the selected macro. &lt;/p&gt;
&lt;p&gt;If this button is greyed out, either there is no selected macro or the macro manager does not have the source code for the macro you have selected (in which case &lt;tt&gt;No&lt;/tt&gt; will be shown in the &lt;tt&gt;Edit &lt;/tt&gt;column of the macro).&lt;/p&gt;
&lt;p&gt;If Scribus doesn&apos;t have the source, the macro was probably created by a script.&lt;/p&gt;</source>
        <translation type="obsolete">&lt;p&gt;Editar la macro seleccionada.&lt;/p&gt;
&lt;p&gt;Si este botón esta desactivado, o no hay ninguna macro seleccionada o el administrador de macros no tiene el código fuente de la macro que has seleccionado (en cuyo caso se mostrará &lt;tt&gt;No&lt;/tt&gt; en la columna &lt;tt&gt;Editable&lt;/tt&gt;).&lt;/p&gt;
&lt;p&gt;Si Scribus no tiene el código fuente, probablemente la macro la creó un script.&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus Macro Files (*.pymacro)</source>
        <translation type="obsolete">Archivos de Macro de Scribus (*.pymacro)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Open File Dialog</source>
        <translation type="obsolete">Diálogo de Abrir Archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Select the macro file to load.</source>
        <translation type="obsolete">Selecciona el archivo de macro a cargar.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save File Dialog</source>
        <translation type="obsolete">Diálogo de Guardar Archivo</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Save all macros</source>
        <translation type="obsolete">Guardar todas las macros</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Rename Macro</source>
        <translation type="obsolete">Scribus - Renombrar Macro</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Enter new name: </source>
        <translation type="obsolete">Introduce el nuevo nombre: </translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Scribus - Set Macro Shortcut</source>
        <translation type="obsolete">Scribus - Asignar Acceso Rápido</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Enter new shortcut: </source>
        <translation type="obsolete">Introduce el nuevo acceso rápido:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Yes</source>
        <translation type="obsolete">Sí</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>No</source>
        <translation type="obsolete">No</translation>
    </message>
</context>
<context>
    <name>MarginDialog</name>
    <message>
        <location filename="../margindialog.cpp" line="32"/>
        <source>Manage Page Properties</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="40"/>
        <source>Page Size</source>
        <translation type="unfinished">Formato de página</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="45"/>
        <source>&amp;Size:</source>
        <translation type="unfinished">&amp;Tamaño:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Custom</source>
        <translation type="obsolete">Personalizado</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="61"/>
        <source>Orie&amp;ntation:</source>
        <translation type="unfinished">&amp;Orientación:</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="64"/>
        <source>Portrait</source>
        <translation type="unfinished">Vertical</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="65"/>
        <source>Landscape</source>
        <translation type="unfinished">Apaisado</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="72"/>
        <source>&amp;Width:</source>
        <translation type="unfinished">Anc&amp;hura:</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="79"/>
        <source>&amp;Height:</source>
        <translation type="unfinished">Al&amp;tura:</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="83"/>
        <source>Move Objects with their Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="89"/>
        <source>Type:</source>
        <translation type="unfinished">Tipo:</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="109"/>
        <source>Margin Guides</source>
        <translation type="unfinished">Guías de los márgenes</translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="115"/>
        <source>Other Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../margindialog.cpp" line="120"/>
        <source>Master Page:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
</context>
<context>
    <name>MarginWidget</name>
    <message>
        <location filename="../marginWidget.cpp" line="48"/>
        <source>&amp;Bottom:</source>
        <translation type="unfinished">I&amp;nferior:</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="49"/>
        <source>&amp;Top:</source>
        <translation type="unfinished">&amp;Superior:</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="203"/>
        <source>&amp;Right:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="202"/>
        <source>&amp;Left:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="148"/>
        <source>Distance between the top margin guide and the edge of the page</source>
        <translation type="unfinished">Distancia entre la guía del margen superior y el borde de la página</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="149"/>
        <source>Distance between the bottom margin guide and the edge of the page</source>
        <translation type="unfinished">Distancia entre la guía del margen inferior y el borde de la página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Distance between the left margin guide and the edge of the page.
If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation type="obsolete">Distancia entre la guía del margen izquierdo y el borde de la página.
Si las páginas enfrentadas están activadas, este espacio se puede usar
para lograr los márgenes correctos para la encuadernación.</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Distance between the right margin guide and the edge of the page.
If Facing Pages is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation type="obsolete">Distancia entre la guía del margen derecho y el borde de la página.
Si las páginas enfrentadas están activadas, este espacio se puede usar
para lograr los márgenes correctos para la encuadernación.</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="202"/>
        <source>&amp;Inside:</source>
        <translation type="unfinished">&amp;Interior:</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="203"/>
        <source>O&amp;utside:</source>
        <translation type="unfinished">&amp;Exterior:</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="36"/>
        <source>Preset Layouts:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="83"/>
        <source>Apply the margin changes to all existing pages in the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="95"/>
        <source>Printer Margins...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="97"/>
        <source>Import the margins for the selected page size from the available printers.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="72"/>
        <source>Apply settings to:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="75"/>
        <source>All Document Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="79"/>
        <source>All Master Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="84"/>
        <source>Apply the margin changes to all existing master pages in the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="101"/>
        <source>Margin Guides</source>
        <translation type="unfinished">Guías de los márgenes</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="119"/>
        <source>Top:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="124"/>
        <source>Bottom:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="135"/>
        <source>Distance for bleed from the top of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo superior de la página real</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="136"/>
        <source>Distance for bleed from the bottom of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo inferior de la página real</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="137"/>
        <source>Distance for bleed from the left of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo izquierdo de la página real</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="138"/>
        <source>Distance for bleed from the right of the physical page</source>
        <translation type="unfinished">Distancia del margen desde el extremo derecho de la página real</translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="144"/>
        <source>Bleeds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="208"/>
        <source>Inside:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="209"/>
        <source>Outside:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="213"/>
        <source>Left:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="214"/>
        <source>Right:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="150"/>
        <source>Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../marginWidget.cpp" line="151"/>
        <source>Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MasterPagesPalette</name>
    <message>
        <location filename="../muster.cpp" line="38"/>
        <source>Edit Master Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Warning</source>
        <translation type="obsolete">Atención</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="109"/>
        <source>Do you really want to delete this master page?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;No</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Sí</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="134"/>
        <source>&amp;Name:</source>
        <translation type="unfinished">&amp;Nombre:</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="134"/>
        <source>New Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Copy of %1</source>
        <translation type="obsolete">Copia de %1</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="231"/>
        <source>Name:</source>
        <translation type="unfinished">Nombre:</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="231"/>
        <source>New MasterPage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="280"/>
        <source>Copy #%1 of </source>
        <translation type="unfinished">Copia #%1 de </translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="78"/>
        <source>Duplicate the selected master page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="79"/>
        <source>Delete the selected master page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="80"/>
        <source>Add a new master page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="81"/>
        <source>Import master pages from another document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="231"/>
        <source>New Master Page %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="360"/>
        <source>Unable to Rename Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="360"/>
        <source>The Normal page is not allowed to be renamed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="364"/>
        <source>Rename Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="364"/>
        <source>New Name:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../muster.cpp" line="132"/>
        <source>Copy #%1 of %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Mdup</name>
    <message>
        <location filename="../mdup.cpp" line="29"/>
        <source>Multiple Duplicate</source>
        <translation type="obsolete">Duplicación múltiple</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="48"/>
        <source>&amp;Number of Copies:</source>
        <translation type="obsolete">&amp;Número de copias:</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="50"/>
        <source>&amp;Horizontal Shift:</source>
        <translation type="obsolete">Desplazamiento &amp;horizontal:</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="52"/>
        <source>&amp;Vertical Shift:</source>
        <translation type="obsolete">Desplazamiento &amp;vertical:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
</context>
<context>
    <name>Measurements</name>
    <message>
        <location filename="../measurements.cpp" line="115"/>
        <source>Distances</source>
        <translation>Distancias</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="117"/>
        <source>X1:</source>
        <translation>X1:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="118"/>
        <source>Y1:</source>
        <translation>Y1:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="119"/>
        <source>X2:</source>
        <translation>X2:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="120"/>
        <source>Y2:</source>
        <translation>Y2:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="121"/>
        <source>DX:</source>
        <translation>DX:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="122"/>
        <source>DY:</source>
        <translation>DY:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="123"/>
        <source>Angle:</source>
        <translation>Ángulo:</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="124"/>
        <source>Length:</source>
        <translation>Longitud:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> mm</source>
        <translation type="obsolete"> mm</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> in</source>
        <translation type="obsolete"> in</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source> p</source>
        <translation type="obsolete"> p</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="49"/>
        <source>pt</source>
        <translation type="unfinished">pt</translation>
    </message>
</context>
<context>
    <name>MergeDoc</name>
    <message>
        <location filename="" line="136965632"/>
        <source>Import Template</source>
        <translation type="obsolete">Importar Plantilla</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="38"/>
        <source>Import Page(s)</source>
        <translation>Importar Página(s)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>From Document:</source>
        <translation type="obsolete">Desde el documento:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Change...</source>
        <translation type="obsolete">Cambiar...</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Import Page(s):</source>
        <translation type="obsolete">Importar página(s):</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation type="obsolete">Inserta una lista de elementos separados por comas,
donde un elemento puede ser * para todas las páginas,
1-5 para un intervalo de páginas o un único número.</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="75"/>
        <source> from 0</source>
        <translation> de 0</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="78"/>
        <source>Create Page(s)</source>
        <translation>Crear página(s)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>before Page</source>
        <translation type="obsolete">antes de la página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>after Page</source>
        <translation type="obsolete">después de la página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>at End</source>
        <translation type="obsolete">al final</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Import</source>
        <translation type="obsolete">Importar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Cancel</source>
        <translation type="obsolete">Cancelar</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="133"/>
        <source>Open</source>
        <translation>Abrir</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="133"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation>Documentos (*.sla *.sla.gz *.scd *.scd.gz);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">Documentos (*.sla *.scd);; Todos los archivos (*)</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="188"/>
        <source> from %1</source>
        <translation> de %1</translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="38"/>
        <source>Import Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="49"/>
        <source>&amp;From Document:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="52"/>
        <source>Chan&amp;ge...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="55"/>
        <source>&amp;Import Page(s):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="59"/>
        <source>&amp;Import Master Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="72"/>
        <source>Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="82"/>
        <source>Before Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="83"/>
        <source>After Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="84"/>
        <source>At End</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mergedoc.cpp" line="99"/>
        <source>&amp;Import</source>
        <translation type="unfinished">&amp;Importar</translation>
    </message>
</context>
<context>
    <name>MissingFont</name>
    <message>
        <location filename="../missing.cpp" line="309"/>
        <source>Missing Font</source>
        <translation type="unfinished">Fuente ausente</translation>
    </message>
    <message>
        <location filename="../missing.cpp" line="317"/>
        <source>The Font %1 is not installed.</source>
        <translation type="unfinished">La fuente %1 no está instalada.</translation>
    </message>
    <message>
        <location filename="../missing.cpp" line="322"/>
        <source>Use</source>
        <translation type="unfinished">Usar</translation>
    </message>
    <message>
        <location filename="../missing.cpp" line="336"/>
        <source>instead</source>
        <translation type="unfinished">en su lugar.</translation>
    </message>
</context>
<context>
    <name>ModeToolBar</name>
    <message>
        <location filename="../werktoolb.cpp" line="39"/>
        <source>Tools</source>
        <translation type="unfinished">Herramientas</translation>
    </message>
    <message>
        <location filename="../werktoolb.cpp" line="130"/>
        <source>Properties...</source>
        <translation type="unfinished">Propiedades...</translation>
    </message>
</context>
<context>
    <name>MovePages</name>
    <message>
        <location filename="../movepage.cpp" line="28"/>
        <source>Move Pages</source>
        <translation>Mover Páginas</translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="37"/>
        <source>Copy Page</source>
        <translation>Copiar Página</translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="73"/>
        <source>Move Page(s):</source>
        <translation>Mover página(s):</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>to:</source>
        <translation type="obsolete">hasta:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>before Page</source>
        <translation type="obsolete">antes de la página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>after Page</source>
        <translation type="obsolete">después de la página</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>at End</source>
        <translation type="obsolete">al final</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;Aceptar</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="37"/>
        <source>Move Page(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="64"/>
        <source>Before Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="65"/>
        <source>After Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="66"/>
        <source>At End</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="46"/>
        <source>To:</source>
        <translation type="unfinished">Hasta:</translation>
    </message>
    <message>
        <location filename="../movepage.cpp" line="54"/>
        <source>Number of copies:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Mpalette</name>
    <message>
        <location filename="../mpalette.cpp" line="4296"/>
        <source>Properties</source>
        <translation>Propiedades</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4298"/>
        <source>X, Y, &amp;Z</source>
        <translation>X, Y, &amp;Z</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4301"/>
        <source>&amp;Shape</source>
        <translation>&amp;Forma</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4299"/>
        <source>&amp;Text</source>
        <translation>&amp;Texto</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4300"/>
        <source>&amp;Image</source>
        <translation>&amp;Imagen</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4302"/>
        <source>&amp;Line</source>
        <translation>&amp;Linea</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4303"/>
        <source>&amp;Colors</source>
        <translation>&amp;Colores</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4306"/>
        <source>Name</source>
        <translation>Nombre:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4307"/>
        <source>Geometry</source>
        <translation>Geometría</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4476"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4399"/>
        <source>&amp;X-Pos:</source>
        <translation>Posición &amp;X:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4400"/>
        <source>&amp;Y-Pos:</source>
        <translation>Posicón &amp;Y:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4310"/>
        <source>&amp;Width:</source>
        <translation>Anc&amp;hura:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4311"/>
        <source>&amp;Height:</source>
        <translation>Al&amp;tura:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4312"/>
        <source>&amp;Rotation:</source>
        <translation>&amp;Rotación:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4313"/>
        <source>Basepoint:</source>
        <translation>Punto base:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4314"/>
        <source>Level</source>
        <translation>Nivel</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4317"/>
        <source>Shape:</source>
        <translation>Forma:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4318"/>
        <source>&amp;Edit Shape...</source>
        <translation>&amp;Editar forma...</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4338"/>
        <source>R&amp;ound
Corners:</source>
        <translation>Esquinas &amp;redondeadas:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4339"/>
        <source>Distance of Text</source>
        <translation>Distancia del texto:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4340"/>
        <source>Colu&amp;mns:</source>
        <translation>Colu&amp;mnas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Gap:</source>
        <translation type="obsolete">Es&amp;pacio:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4347"/>
        <source>To&amp;p:</source>
        <translation>&amp;Superior:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4348"/>
        <source>&amp;Bottom:</source>
        <translation>I&amp;nferior:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4349"/>
        <source>&amp;Left:</source>
        <translation>Iz&amp;quierda:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4350"/>
        <source>&amp;Right:</source>
        <translation>&amp;Derecha:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4351"/>
        <source>T&amp;abulators...</source>
        <translation>Ta&amp;buladores...</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4352"/>
        <source>Path Text Properties</source>
        <translation>Propiedades del Texto sobre Trazado</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4358"/>
        <source>Show Curve</source>
        <translation>Mostrar curva</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4360"/>
        <source>Start Offset:</source>
        <translation>Desplazamiento inicial:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4361"/>
        <source>Distance from Curve:</source>
        <translation>Distancia desde curva:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Text &amp;Flows Around Frame</source>
        <translation type="obsolete">El texto flu&amp;ye alrededor del marco</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4374"/>
        <source>Use &amp;Bounding Box</source>
        <translation>Usar cuadro circ&amp;unscrito</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4375"/>
        <source>&amp;Use Contour Line</source>
        <translation>Usar línea de c&amp;ontorno</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>&amp;Font Size:</source>
        <translation type="obsolete">Ta&amp;maño de fuente:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4464"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Shade:</source>
        <translation type="obsolete">Saturación:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Custom Spacing</source>
        <translation type="obsolete">Espaciado personalizado</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>L&amp;ine Spacing:</source>
        <translation type="obsolete">Es&amp;pacio entre lineas:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>St&amp;yle:</source>
        <translation type="obsolete">&amp;Estilo:</translation>
    </message>
    <message>
        <location filename="" line="136965632"/>
        <source>Lan&amp;guage:</source>
        <translation type="obsolete">I&amp;dioma:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4396"/>
        <source>&amp;Free Scaling</source>
        <translation>Escalado Li&amp;bre</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4401"/>
        <source>X-Sc&amp;ale:</source>
        <translation>Esc&amp;ala en X:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4402"/>
        <source>Y-Scal&amp;e:</source>
        <translation>&amp;Escalar en Y:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4403"/>
        <source>Scale &amp;To Frame Size</source>
        <translation>Escalar al tamaño del &amp;marco</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4404"/>
        <source>P&amp;roportional</source>
        <translation>&amp;Proporcional</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4407"/>
        <source>Input Profile:</source>
        <translation>Perfil de entrada:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4408"/>
        <source>Rendering Intent:</source>
        <translation>Modo de Visualización:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4414"/>
        <source>Perceptual</source>
        <translation>Perceptivo</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4416"/>
        <source>Saturation</source>
        <translation>Saturación</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4421"/>
        <source>Left Point</source>
        <translation>Punto izquierdo</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4422"/>
        <source>End Points</source>
        <translation>Extremos</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4424"/>
        <source>&amp;Basepoint:</source>
        <translation>P&amp;unto base:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4425"/>
        <source>T&amp;ype of Line:</source>
        <translation>Ti&amp;po de línea:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4437"/>
        <source>Line &amp;Width:</source>
        <translation>&amp;Ancho de linea:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4441"/>
        <source>Miter Join</source>
        <translation>Unión de inglete</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4442"/>
        <source>Bevel Join</source>
        <translation>Unión biselada</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4443"/>
        <source>Round Join</source>
        <translation>Unión redondeada</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4438"/>
        <source>Ed&amp;ges:</source>
        <translation>&amp;Bordes:</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4448"/>
        <source>Flat Cap</source>
        <translation>Plano</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4449"/>
        <source>Square Cap</source>
        <translation>Cuadrado</translation>
    </message>
    <message>
        <location filename="../mpalette.cpp" line="4450"/>
        <source>Round Cap</source>
        <translation>Redond